4 The git configuration file contains a number of variables that affect
5 the git command's behavior. `.git/config` file for each repository
6 is used to store the information for that repository, and
7 `$HOME/.gitconfig` is used to store per user information to give
8 fallback values for `.git/config` file. The file `/etc/gitconfig`
9 can be used to store system-wide defaults.
11 They can be used by both the git plumbing
12 and the porcelains. The variables are divided into sections, where
13 in the fully qualified variable name the variable itself is the last
14 dot-separated segment and the section name is everything before the last
15 dot. The variable names are case-insensitive and only alphanumeric
16 characters are allowed. Some variables may appear multiple times.
21 The syntax is fairly flexible and permissive; whitespaces are mostly
22 ignored. The '#' and ';' characters begin comments to the end of line,
23 blank lines are ignored.
25 The file consists of sections and variables. A section begins with
26 the name of the section in square brackets and continues until the next
27 section begins. Section names are not case sensitive. Only alphanumeric
28 characters, '`-`' and '`.`' are allowed in section names. Each variable
29 must belong to some section, which means that there must be section
30 header before first setting of a variable.
32 Sections can be further divided into subsections. To begin a subsection
33 put its name in double quotes, separated by space from the section name,
34 in the section header, like in example below:
37 [section "subsection"]
41 Subsection names can contain any characters except newline (doublequote
42 '`"`' and backslash have to be escaped as '`\"`' and '`\\`',
43 respectively) and are case sensitive. Section header cannot span multiple
44 lines. Variables may belong directly to a section or to a given subsection.
45 You can have `[section]` if you have `[section "subsection"]`, but you
48 There is also (case insensitive) alternative `[section.subsection]` syntax.
49 In this syntax subsection names follow the same restrictions as for section
52 All the other lines are recognized as setting variables, in the form
53 'name = value'. If there is no equal sign on the line, the entire line
54 is taken as 'name' and the variable is recognized as boolean "true".
55 The variable names are case-insensitive and only alphanumeric
56 characters and '`-`' are allowed. There can be more than one value
57 for a given variable; we say then that variable is multivalued.
59 Leading and trailing whitespace in a variable value is discarded.
60 Internal whitespace within a variable value is retained verbatim.
62 The values following the equals sign in variable assign are all either
63 a string, an integer, or a boolean. Boolean values may be given as yes/no,
64 0/1 or true/false. Case is not significant in boolean values, when
65 converting value to the canonical form using '--bool' type specifier;
66 `git-config` will ensure that the output is "true" or "false".
68 String values may be entirely or partially enclosed in double quotes.
69 You need to enclose variable value in double quotes if you want to
70 preserve leading or trailing whitespace, or if variable value contains
71 beginning of comment characters (if it contains '#' or ';').
72 Double quote '`"`' and backslash '`\`' characters in variable value must
73 be escaped: use '`\"`' for '`"`' and '`\\`' for '`\`'.
75 The following escape sequences (beside '`\"`' and '`\\`') are recognized:
76 '`\n`' for newline character (NL), '`\t`' for horizontal tabulation (HT, TAB)
77 and '`\b`' for backspace (BS). No other char escape sequence, nor octal
78 char sequences are valid.
80 Variable value ending in a '`\`' is continued on the next line in the
81 customary UNIX fashion.
83 Some variables may require special value format.
90 ; Don't trust file modes
95 external = "/usr/local/bin/gnu-diff -u"
100 merge = refs/heads/devel
104 gitProxy="ssh" for "kernel.org"
105 gitProxy=default-proxy ; for the rest
110 Note that this list is non-comprehensive and not necessarily complete.
111 For command-specific variables, you will find a more detailed description
112 in the appropriate manual page. You will find a description of non-core
113 porcelain configuration variables in the respective porcelain documentation.
116 If false, the executable bit differences between the index and
117 the working copy are ignored; useful on broken filesystems like FAT.
118 See gitlink:git-update-index[1]. True by default.
121 The commands that output paths (e.g. `ls-files`,
122 `diff`), when not given the `-z` option, will quote
123 "unusual" characters in the pathname by enclosing the
124 pathname in a double-quote pair and with backslashes the
125 same way strings in C source code are quoted. If this
126 variable is set to false, the bytes higher than 0x80 are
127 not quoted but output as verbatim. Note that double
128 quote, backslash and control characters are always
129 quoted without `-z` regardless of the setting of this
133 If true, makes git convert `CRLF` at the end of lines in text files to
134 `LF` when reading from the filesystem, and convert in reverse when
135 writing to the filesystem. The variable can be set to
136 'input', in which case the conversion happens only while
137 reading from the filesystem but files are written out with
138 `LF` at the end of lines. Currently, which paths to consider
139 "text" (i.e. be subjected to the autocrlf mechanism) is
140 decided purely based on the contents.
143 If false, symbolic links are checked out as small plain files that
144 contain the link text. gitlink:git-update-index[1] and
145 gitlink:git-add[1] will not change the recorded type to regular
146 file. Useful on filesystems like FAT that do not support
147 symbolic links. True by default.
150 A "proxy command" to execute (as 'command host port') instead
151 of establishing direct connection to the remote server when
152 using the git protocol for fetching. If the variable value is
153 in the "COMMAND for DOMAIN" format, the command is applied only
154 on hostnames ending with the specified domain string. This variable
155 may be set multiple times and is matched in the given order;
156 the first match wins.
158 Can be overridden by the 'GIT_PROXY_COMMAND' environment variable
159 (which always applies universally, without the special "for"
163 The working copy files are assumed to stay unchanged until you
164 mark them otherwise manually - Git will not detect the file changes
165 by lstat() calls. This is useful on systems where those are very
166 slow, such as Microsoft Windows. See gitlink:git-update-index[1].
169 core.preferSymlinkRefs::
170 Instead of the default "symref" format for HEAD
171 and other symbolic reference files, use symbolic links.
172 This is sometimes needed to work with old scripts that
173 expect HEAD to be a symbolic link.
176 If true this repository is assumed to be 'bare' and has no
177 working directory associated with it. If this is the case a
178 number of commands that require a working directory will be
179 disabled, such as gitlink:git-add[1] or gitlink:git-merge[1].
181 This setting is automatically guessed by gitlink:git-clone[1] or
182 gitlink:git-init[1] when the repository was created. By default a
183 repository that ends in "/.git" is assumed to be not bare (bare =
184 false), while all other repositories are assumed to be bare (bare
188 Set the path to the working tree. The value will not be
189 used in combination with repositories found automatically in
190 a .git directory (i.e. $GIT_DIR is not set).
191 This can be overridden by the GIT_WORK_TREE environment
192 variable and the '--work-tree' command line option.
194 core.logAllRefUpdates::
195 Enable the reflog. Updates to a ref <ref> is logged to the file
196 "$GIT_DIR/logs/<ref>", by appending the new and old
197 SHA1, the date/time and the reason of the update, but
198 only when the file exists. If this configuration
199 variable is set to true, missing "$GIT_DIR/logs/<ref>"
200 file is automatically created for branch heads.
202 This information can be used to determine what commit
203 was the tip of a branch "2 days ago".
205 This value is true by default in a repository that has
206 a working directory associated with it, and false by
207 default in a bare repository.
209 core.repositoryFormatVersion::
210 Internal variable identifying the repository format and layout
213 core.sharedRepository::
214 When 'group' (or 'true'), the repository is made shareable between
215 several users in a group (making sure all the files and objects are
216 group-writable). When 'all' (or 'world' or 'everybody'), the
217 repository will be readable by all users, additionally to being
218 group-shareable. When 'umask' (or 'false'), git will use permissions
219 reported by umask(2). See gitlink:git-init[1]. False by default.
221 core.warnAmbiguousRefs::
222 If true, git will warn you if the ref name you passed it is ambiguous
223 and might match multiple refs in the .git/refs/ tree. True by default.
226 An integer -1..9, indicating a default compression level.
227 -1 is the zlib default. 0 means no compression,
228 and 1..9 are various speed/size tradeoffs, 9 being slowest.
229 If set, this provides a default to other compression variables,
230 such as 'core.loosecompression' and 'pack.compression'.
232 core.loosecompression::
233 An integer -1..9, indicating the compression level for objects that
234 are not in a pack file. -1 is the zlib default. 0 means no
235 compression, and 1..9 are various speed/size tradeoffs, 9 being
236 slowest. If not set, defaults to core.compression. If that is
237 not set, defaults to 1 (best speed).
239 core.packedGitWindowSize::
240 Number of bytes of a pack file to map into memory in a
241 single mapping operation. Larger window sizes may allow
242 your system to process a smaller number of large pack files
243 more quickly. Smaller window sizes will negatively affect
244 performance due to increased calls to the operating system's
245 memory manager, but may improve performance when accessing
246 a large number of large pack files.
248 Default is 1 MiB if NO_MMAP was set at compile time, otherwise 32
249 MiB on 32 bit platforms and 1 GiB on 64 bit platforms. This should
250 be reasonable for all users/operating systems. You probably do
251 not need to adjust this value.
253 Common unit suffixes of 'k', 'm', or 'g' are supported.
255 core.packedGitLimit::
256 Maximum number of bytes to map simultaneously into memory
257 from pack files. If Git needs to access more than this many
258 bytes at once to complete an operation it will unmap existing
259 regions to reclaim virtual address space within the process.
261 Default is 256 MiB on 32 bit platforms and 8 GiB on 64 bit platforms.
262 This should be reasonable for all users/operating systems, except on
263 the largest projects. You probably do not need to adjust this value.
265 Common unit suffixes of 'k', 'm', or 'g' are supported.
267 core.deltaBaseCacheLimit::
268 Maximum number of bytes to reserve for caching base objects
269 that multiple deltafied objects reference. By storing the
270 entire decompressed base objects in a cache Git is able
271 to avoid unpacking and decompressing frequently used base
272 objects multiple times.
274 Default is 16 MiB on all platforms. This should be reasonable
275 for all users/operating systems, except on the largest projects.
276 You probably do not need to adjust this value.
278 Common unit suffixes of 'k', 'm', or 'g' are supported.
281 In addition to '.gitignore' (per-directory) and
282 '.git/info/exclude', git looks into this file for patterns
283 of files which are not meant to be tracked. See
284 gitlink:gitignore[5].
287 Commands such as `commit` and `tag` that lets you edit
288 messages by launching an editor uses the value of this
289 variable when it is set, and the environment variable
290 `GIT_EDITOR` is not set. The order of preference is
291 `GIT_EDITOR` environment, `core.editor`, `VISUAL` and
292 `EDITOR` environment variables and then finally `vi`.
295 The command that git will use to paginate output. Can be overridden
296 with the `GIT_PAGER` environment variable.
299 Command aliases for the gitlink:git[1] command wrapper - e.g.
300 after defining "alias.last = cat-file commit HEAD", the invocation
301 "git last" is equivalent to "git cat-file commit HEAD". To avoid
302 confusion and troubles with script usage, aliases that
303 hide existing git commands are ignored. Arguments are split by
304 spaces, the usual shell quoting and escaping is supported.
305 quote pair and a backslash can be used to quote them.
307 If the alias expansion is prefixed with an exclamation point,
308 it will be treated as a shell command. For example, defining
309 "alias.new = !gitk --all --not ORIG_HEAD", the invocation
310 "git new" is equivalent to running the shell command
311 "gitk --all --not ORIG_HEAD".
314 Tells `git-apply` how to handle whitespaces, in the same way
315 as the '--whitespace' option. See gitlink:git-apply[1].
317 branch.autosetupmerge::
318 Tells `git-branch` and `git-checkout` to setup new branches
319 so that gitlink:git-pull[1] will appropriately merge from that
320 remote branch. Note that even if this option is not set,
321 this behavior can be chosen per-branch using the `--track`
322 and `--no-track` options. This option defaults to false.
324 branch.<name>.remote::
325 When in branch <name>, it tells `git fetch` which remote to fetch.
326 If this option is not given, `git fetch` defaults to remote "origin".
328 branch.<name>.merge::
329 When in branch <name>, it tells `git fetch` the default
330 refspec to be marked for merging in FETCH_HEAD. The value is
331 handled like the remote part of a refspec, and must match a
332 ref which is fetched from the remote given by
333 "branch.<name>.remote".
334 The merge information is used by `git pull` (which at first calls
335 `git fetch`) to lookup the default branch for merging. Without
336 this option, `git pull` defaults to merge the first refspec fetched.
337 Specify multiple values to get an octopus merge.
338 If you wish to setup `git pull` so that it merges into <name> from
339 another branch in the local repository, you can point
340 branch.<name>.merge to the desired branch, and use the special setting
341 `.` (a period) for branch.<name>.remote.
343 branch.<name>.mergeoptions::
344 Sets default options for merging into branch <name>. The syntax and
345 supported options are equal to that of gitlink:git-merge[1], but
346 option values containing whitespace characters are currently not
349 branch.<name>.rebase::
350 When true, rebase the branch <name> on top of the fetched branch,
351 instead of merging the default branch from the default remote.
352 *NOTE*: this is a possibly dangerous operation; do *not* use
353 it unless you understand the implications (see gitlink:git-rebase[1]
357 A boolean to make git-clean do nothing unless given -f
358 or -n. Defaults to true.
361 A boolean to enable/disable color in the output of
362 gitlink:git-branch[1]. May be set to `true` (or `always`),
363 `false` (or `never`) or `auto`, in which case colors are used
364 only when the output is to a terminal. Defaults to false.
366 color.branch.<slot>::
367 Use customized color for branch coloration. `<slot>` is one of
368 `current` (the current branch), `local` (a local branch),
369 `remote` (a tracking branch in refs/remotes/), `plain` (other
372 The value for these configuration variables is a list of colors (at most
373 two) and attributes (at most one), separated by spaces. The colors
374 accepted are `normal`, `black`, `red`, `green`, `yellow`, `blue`,
375 `magenta`, `cyan` and `white`; the attributes are `bold`, `dim`, `ul`,
376 `blink` and `reverse`. The first color given is the foreground; the
377 second is the background. The position of the attribute, if any,
381 When true (or `always`), always use colors in patch.
382 When false (or `never`), never. When set to `auto`, use
383 colors only when the output is to the terminal.
386 Use customized color for diff colorization. `<slot>` specifies
387 which part of the patch to use the specified color, and is one
388 of `plain` (context text), `meta` (metainformation), `frag`
389 (hunk header), `old` (removed lines), `new` (added lines),
390 `commit` (commit headers), or `whitespace` (highlighting dubious
391 whitespace). The values of these variables may be specified as
392 in color.branch.<slot>.
395 A boolean to enable/disable colored output when the pager is in
396 use (default is true).
399 A boolean to enable/disable color in the output of
400 gitlink:git-status[1]. May be set to `true` (or `always`),
401 `false` (or `never`) or `auto`, in which case colors are used
402 only when the output is to a terminal. Defaults to false.
404 color.status.<slot>::
405 Use customized color for status colorization. `<slot>` is
406 one of `header` (the header text of the status message),
407 `added` or `updated` (files which are added but not committed),
408 `changed` (files which are changed but not added in the index),
409 or `untracked` (files which are not tracked by git). The values of
410 these variables may be specified as in color.branch.<slot>.
413 Specify a file to use as the template for new commit messages.
415 diff.autorefreshindex::
416 When using `git diff` to compare with work tree
417 files, do not consider stat-only change as changed.
418 Instead, silently run `git update-index --refresh` to
419 update the cached stat information for paths whose
420 contents in the work tree match the contents in the
421 index. This option defaults to true. Note that this
422 affects only `git diff` Porcelain, and not lower level
423 `diff` commands, such as `git diff-files`.
426 The number of files to consider when performing the copy/rename
427 detection; equivalent to the git diff option '-l'.
430 Tells git to detect renames. If set to any boolean value, it
431 will enable basic rename detection. If set to "copies" or
432 "copy", it will detect copies, as well.
435 If the number of objects fetched over the git native
436 transfer is below this
437 limit, then the objects will be unpacked into loose object
438 files. However if the number of received objects equals or
439 exceeds this limit then the received pack will be stored as
440 a pack, after adding any missing delta bases. Storing the
441 pack from a push can make the push operation complete faster,
442 especially on slow filesystems.
445 A boolean which can enable sequence numbers in patch subjects.
446 Seting this option to "auto" will enable it only if there is
447 more than one patch. See --numbered option in
448 gitlink:git-format-patch[1].
451 Additional email headers to include in a patch to be submitted
452 by mail. See gitlink:git-format-patch[1].
455 The default for format-patch is to output files with the suffix
456 `.patch`. Use this variable to change that suffix (make sure to
457 include the dot if you want it).
459 gc.aggressiveWindow::
460 The window size parameter used in the delta compression
461 algorithm used by 'git gc --aggressive'. This defaults
465 When there are approximately more than this many loose
466 objects in the repository, `git gc --auto` will pack them.
467 Some Porcelain commands use this command to perform a
468 light-weight garbage collection from time to time. Setting
469 this to 0 disables it.
472 When there are more than this many packs that are not
473 marked with `*.keep` file in the repository, `git gc
474 --auto` consolidates them into one larger pack. Setting
475 this to 0 disables this.
478 `git gc` does not run `git pack-refs` in a bare repository by
479 default so that older dumb-transport clients can still fetch
480 from the repository. Setting this to `true` lets `git
481 gc` to run `git pack-refs`. Setting this to `false` tells
482 `git gc` never to run `git pack-refs`. The default setting is
483 `notbare`. Enable it only when you know you do not have to
484 support such clients. The default setting will change to `true`
485 at some stage, and setting this to `false` will continue to
486 prevent `git pack-refs` from being run from `git gc`.
489 `git reflog expire` removes reflog entries older than
490 this time; defaults to 90 days.
492 gc.reflogexpireunreachable::
493 `git reflog expire` removes reflog entries older than
494 this time and are not reachable from the current tip;
498 Records of conflicted merge you resolved earlier are
499 kept for this many days when `git rerere gc` is run.
500 The default is 60 days. See gitlink:git-rerere[1].
502 gc.rerereunresolved::
503 Records of conflicted merge you have not resolved are
504 kept for this many days when `git rerere gc` is run.
505 The default is 15 days. See gitlink:git-rerere[1].
508 Activate recording of resolved conflicts, so that identical
509 conflict hunks can be resolved automatically, should they
510 be encountered again. gitlink:git-rerere[1] command is by
511 default enabled, but can be disabled by setting this option to
515 Whether the CVS server interface is enabled for this repository.
516 See gitlink:git-cvsserver[1].
519 Path to a log file where the CVS server interface well... logs
520 various stuff. See gitlink:git-cvsserver[1].
523 If true, all files are sent to the client in mode '-kb'. This
524 causes the client to treat all files as binary files which suppresses
525 any newline munging it otherwise might do. A work-around for the
526 fact that there is no way yet to set single files to mode '-kb'.
529 Database used by git-cvsserver to cache revision information
530 derived from the git repository. The exact meaning depends on the
531 used database driver, for SQLite (which is the default driver) this
532 is a filename. Supports variable substitution (see
533 gitlink:git-cvsserver[1] for details). May not contain semicolons (`;`).
534 Default: '%Ggitcvs.%m.sqlite'
537 Used Perl DBI driver. You can specify any available driver
538 for this here, but it might not work. git-cvsserver is tested
539 with 'DBD::SQLite', reported to work with 'DBD::Pg', and
540 reported *not* to work with 'DBD::mysql'. Experimental feature.
541 May not contain double colons (`:`). Default: 'SQLite'.
542 See gitlink:git-cvsserver[1].
544 gitcvs.dbuser, gitcvs.dbpass::
545 Database user and password. Only useful if setting 'gitcvs.dbdriver',
546 since SQLite has no concept of database users and/or passwords.
547 'gitcvs.dbuser' supports variable substitution (see
548 gitlink:git-cvsserver[1] for details).
550 All gitcvs variables except for 'gitcvs.allbinary' can also be
551 specified as 'gitcvs.<access_method>.<varname>' (where 'access_method'
552 is one of "ext" and "pserver") to make them apply only for the given
556 Override the HTTP proxy, normally configured using the 'http_proxy'
557 environment variable (see gitlink:curl[1]). This can be overridden
558 on a per-remote basis; see remote.<name>.proxy
561 Whether to verify the SSL certificate when fetching or pushing
562 over HTTPS. Can be overridden by the 'GIT_SSL_NO_VERIFY' environment
566 File containing the SSL certificate when fetching or pushing
567 over HTTPS. Can be overridden by the 'GIT_SSL_CERT' environment
571 File containing the SSL private key when fetching or pushing
572 over HTTPS. Can be overridden by the 'GIT_SSL_KEY' environment
576 File containing the certificates to verify the peer with when
577 fetching or pushing over HTTPS. Can be overridden by the
578 'GIT_SSL_CAINFO' environment variable.
581 Path containing files with the CA certificates to verify the peer
582 with when fetching or pushing over HTTPS. Can be overridden
583 by the 'GIT_SSL_CAPATH' environment variable.
586 How many HTTP requests to launch in parallel. Can be overridden
587 by the 'GIT_HTTP_MAX_REQUESTS' environment variable. Default is 5.
589 http.lowSpeedLimit, http.lowSpeedTime::
590 If the HTTP transfer speed is less than 'http.lowSpeedLimit'
591 for longer than 'http.lowSpeedTime' seconds, the transfer is aborted.
592 Can be overridden by the 'GIT_HTTP_LOW_SPEED_LIMIT' and
593 'GIT_HTTP_LOW_SPEED_TIME' environment variables.
596 A boolean which disables using of EPSV ftp command by curl.
597 This can helpful with some "poor" ftp servers which don't
598 support EPSV mode. Can be overridden by the 'GIT_CURL_FTP_NO_EPSV'
599 environment variable. Default is false (curl will use EPSV).
601 i18n.commitEncoding::
602 Character encoding the commit messages are stored in; git itself
603 does not care per se, but this information is necessary e.g. when
604 importing commits from emails or in the gitk graphical history
605 browser (and possibly at other places in the future or in other
606 porcelains). See e.g. gitlink:git-mailinfo[1]. Defaults to 'utf-8'.
608 i18n.logOutputEncoding::
609 Character encoding the commit messages are converted to when
610 running `git-log` and friends.
613 If true, the initial commit will be shown as a big creation event.
614 This is equivalent to a diff against an empty tree.
615 Tools like gitlink:git-log[1] or gitlink:git-whatchanged[1], which
616 normally hide the root commit will now show it. True by default.
619 Whether to include summaries of merged commits in newly created
620 merge commit messages. False by default.
623 Controls which merge resolution program is used by
624 gitlink:git-mergetool[1]. Valid values are: "kdiff3", "tkdiff",
625 "meld", "xxdiff", "emerge", "vimdiff", "gvimdiff", and "opendiff".
628 Controls the amount of output shown by the recursive merge
629 strategy. Level 0 outputs nothing except a final error
630 message if conflicts were detected. Level 1 outputs only
631 conflicts, 2 outputs conflicts and file changes. Level 5 and
632 above outputs debugging information. The default is level 2.
633 Can be overridden by 'GIT_MERGE_VERBOSITY' environment variable.
635 merge.<driver>.name::
636 Defines a human readable name for a custom low-level
637 merge driver. See gitlink:gitattributes[5] for details.
639 merge.<driver>.driver::
640 Defines the command that implements a custom low-level
641 merge driver. See gitlink:gitattributes[5] for details.
643 merge.<driver>.recursive::
644 Names a low-level merge driver to be used when
645 performing an internal merge between common ancestors.
646 See gitlink:gitattributes[5] for details.
649 The size of the window used by gitlink:git-pack-objects[1] when no
650 window size is given on the command line. Defaults to 10.
653 The maximum delta depth used by gitlink:git-pack-objects[1] when no
654 maximum depth is given on the command line. Defaults to 50.
657 The window memory size limit used by gitlink:git-pack-objects[1]
658 when no limit is given on the command line. The value can be
659 suffixed with "k", "m", or "g". Defaults to 0, meaning no
663 An integer -1..9, indicating the compression level for objects
664 in a pack file. -1 is the zlib default. 0 means no
665 compression, and 1..9 are various speed/size tradeoffs, 9 being
666 slowest. If not set, defaults to core.compression. If that is
667 not set, defaults to -1, the zlib default, which is "a default
668 compromise between speed and compression (currently equivalent
671 pack.deltaCacheSize::
672 The maximum memory in bytes used for caching deltas in
673 gitlink:git-pack-objects[1].
674 A value of 0 means no limit. Defaults to 0.
676 pack.deltaCacheLimit::
677 The maximum size of a delta, that is cached in
678 gitlink:git-pack-objects[1]. Defaults to 1000.
681 Specifies the number of threads to spawn when searching for best
682 delta matches. This requires that gitlink:git-pack-objects[1]
683 be compiled with pthreads otherwise this option is ignored with a
684 warning. This is meant to reduce packing time on multiprocessor
685 machines. The required amount of memory for the delta search window
686 is however multiplied by the number of threads.
689 Specify the default pack index version. Valid values are 1 for
690 legacy pack index used by Git versions prior to 1.5.2, and 2 for
691 the new pack index with capabilities for packs larger than 4 GB
692 as well as proper protection against the repacking of corrupted
693 packs. Version 2 is selected and this config option ignored
694 whenever the corresponding pack is larger than 2 GB. Otherwise
698 The default merge strategy to use when pulling multiple branches
702 The default merge strategy to use when pulling a single branch.
705 The URL of a remote repository. See gitlink:git-fetch[1] or
708 remote.<name>.proxy::
709 For remotes that require curl (http, https and ftp), the URL to
710 the proxy to use for that remote. Set to the empty string to
711 disable proxying for that remote.
713 remote.<name>.fetch::
714 The default set of "refspec" for gitlink:git-fetch[1]. See
715 gitlink:git-fetch[1].
718 The default set of "refspec" for gitlink:git-push[1]. See
721 remote.<name>.skipDefaultUpdate::
722 If true, this remote will be skipped by default when updating
723 using the remote subcommand of gitlink:git-remote[1].
725 remote.<name>.receivepack::
726 The default program to execute on the remote side when pushing. See
727 option \--exec of gitlink:git-push[1].
729 remote.<name>.uploadpack::
730 The default program to execute on the remote side when fetching. See
731 option \--exec of gitlink:git-fetch-pack[1].
733 remote.<name>.tagopt::
734 Setting this value to --no-tags disables automatic tag following when fetching
738 The list of remotes which are fetched by "git remote update
739 <group>". See gitlink:git-remote[1].
741 repack.usedeltabaseoffset::
742 Allow gitlink:git-repack[1] to create packs that uses
743 delta-base offset. Defaults to false.
746 The default gitlink:git-diff-tree[1] arguments to be used
747 for gitlink:git-show[1].
750 The default set of branches for gitlink:git-show-branch[1].
751 See gitlink:git-show-branch[1].
754 This variable can be used to restrict the permission bits of
755 tar archive entries. The default is 0002, which turns off the
756 world write bit. The special value "user" indicates that the
757 archiving user's umask will be used instead. See umask(2) and
758 gitlink:git-archive[1].
761 Your email address to be recorded in any newly created commits.
762 Can be overridden by the 'GIT_AUTHOR_EMAIL', 'GIT_COMMITTER_EMAIL', and
763 'EMAIL' environment variables. See gitlink:git-commit-tree[1].
766 Your full name to be recorded in any newly created commits.
767 Can be overridden by the 'GIT_AUTHOR_NAME' and 'GIT_COMMITTER_NAME'
768 environment variables. See gitlink:git-commit-tree[1].
771 If gitlink:git-tag[1] is not selecting the key you want it to
772 automatically when creating a signed tag, you can override the
773 default selection with this variable. This option is passed
774 unchanged to gpg's --local-user parameter, so you may specify a key
775 using any method that gpg supports.
777 whatchanged.difftree::
778 The default gitlink:git-diff-tree[1] arguments to be used
779 for gitlink:git-whatchanged[1].
782 The configuration variables in the 'imap' section are described
783 in gitlink:git-imap-send[1].
785 receive.unpackLimit::
786 If the number of objects received in a push is below this
787 limit then the objects will be unpacked into loose object
788 files. However if the number of received objects equals or
789 exceeds this limit then the received pack will be stored as
790 a pack, after adding any missing delta bases. Storing the
791 pack from a push can make the push operation complete faster,
792 especially on slow filesystems.
794 receive.denyNonFastForwards::
795 If set to true, git-receive-pack will deny a ref update which is
796 not a fast forward. Use this to prevent such an update via a push,
797 even if that push is forced. This configuration variable is
798 set when initializing a shared repository.
800 transfer.unpackLimit::
801 When `fetch.unpackLimit` or `receive.unpackLimit` are
802 not set, the value of this variable is used instead.