1 # SPDX-License-Identifier: GPL-2.0
5 select ARCH_32BIT_OFF_T
6 select ARCH_CLOCKSOURCE_DATA
7 select ARCH_HAS_DEBUG_VIRTUAL if MMU
8 select ARCH_HAS_DEVMEM_IS_ALLOWED
9 select ARCH_HAS_ELF_RANDOMIZE
10 select ARCH_HAS_FORTIFY_SOURCE
11 select ARCH_HAS_KEEPINITRD
13 select ARCH_HAS_MEMBARRIER_SYNC_CORE
14 select ARCH_HAS_PTE_SPECIAL if ARM_LPAE
15 select ARCH_HAS_PHYS_TO_DMA
16 select ARCH_HAS_SETUP_DMA_OPS
17 select ARCH_HAS_SET_MEMORY
18 select ARCH_HAS_STRICT_KERNEL_RWX if MMU && !XIP_KERNEL
19 select ARCH_HAS_STRICT_MODULE_RWX if MMU
20 select ARCH_HAS_TEARDOWN_DMA_OPS if MMU
21 select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
22 select ARCH_HAVE_CUSTOM_GPIO_H
23 select ARCH_HAS_GCOV_PROFILE_ALL
24 select ARCH_KEEP_MEMBLOCK if HAVE_ARCH_PFN_VALID || KEXEC
25 select ARCH_MIGHT_HAVE_PC_PARPORT
26 select ARCH_NO_SG_CHAIN if !ARM_HAS_SG_CHAIN
27 select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
28 select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
29 select ARCH_SUPPORTS_ATOMIC_RMW
30 select ARCH_USE_BUILTIN_BSWAP
31 select ARCH_USE_CMPXCHG_LOCKREF
32 select ARCH_WANT_IPC_PARSE_VERSION
33 select BUILDTIME_EXTABLE_SORT if MMU
34 select CLONE_BACKWARDS
35 select CPU_PM if SUSPEND || CPU_IDLE
36 select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
37 select DMA_DECLARE_COHERENT
38 select DMA_REMAP if MMU
40 select EDAC_ATOMIC_SCRUB
41 select GENERIC_ALLOCATOR
42 select GENERIC_ARCH_TOPOLOGY if ARM_CPU_TOPOLOGY
43 select GENERIC_ATOMIC64 if CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI
44 select GENERIC_CLOCKEVENTS_BROADCAST if SMP
45 select GENERIC_CPU_AUTOPROBE
46 select GENERIC_EARLY_IOREMAP
47 select GENERIC_IDLE_POLL_SETUP
48 select GENERIC_IRQ_PROBE
49 select GENERIC_IRQ_SHOW
50 select GENERIC_IRQ_SHOW_LEVEL
51 select GENERIC_PCI_IOMAP
52 select GENERIC_SCHED_CLOCK
53 select GENERIC_SMP_IDLE_THREAD
54 select GENERIC_STRNCPY_FROM_USER
55 select GENERIC_STRNLEN_USER
56 select HANDLE_DOMAIN_IRQ
57 select HARDIRQS_SW_RESEND
58 select HAVE_ARCH_AUDITSYSCALL if AEABI && !OABI_COMPAT
59 select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
60 select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
61 select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU
62 select HAVE_ARCH_MMAP_RND_BITS if MMU
63 select HAVE_ARCH_SECCOMP_FILTER if AEABI && !OABI_COMPAT
64 select HAVE_ARCH_THREAD_STRUCT_WHITELIST
65 select HAVE_ARCH_TRACEHOOK
66 select HAVE_ARM_SMCCC if CPU_V7
67 select HAVE_EBPF_JIT if !CPU_ENDIAN_BE32
68 select HAVE_CONTEXT_TRACKING
69 select HAVE_C_RECORDMCOUNT
70 select HAVE_DEBUG_KMEMLEAK
71 select HAVE_DMA_CONTIGUOUS if MMU
72 select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU
73 select HAVE_DYNAMIC_FTRACE_WITH_REGS if HAVE_DYNAMIC_FTRACE
74 select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
75 select HAVE_EXIT_THREAD
76 select HAVE_FTRACE_MCOUNT_RECORD if !XIP_KERNEL
77 select HAVE_FUNCTION_GRAPH_TRACER if !THUMB2_KERNEL && !CC_IS_CLANG
78 select HAVE_FUNCTION_TRACER if !XIP_KERNEL
79 select HAVE_GCC_PLUGINS
80 select HAVE_HW_BREAKPOINT if PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)
81 select HAVE_IDE if PCI || ISA || PCMCIA
82 select HAVE_IRQ_TIME_ACCOUNTING
83 select HAVE_KERNEL_GZIP
84 select HAVE_KERNEL_LZ4
85 select HAVE_KERNEL_LZMA
86 select HAVE_KERNEL_LZO
88 select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
89 select HAVE_KRETPROBES if HAVE_KPROBES
90 select HAVE_MOD_ARCH_SPECIFIC
92 select HAVE_OPROFILE if HAVE_PERF_EVENTS
93 select HAVE_OPTPROBES if !THUMB2_KERNEL
94 select HAVE_PERF_EVENTS
96 select HAVE_PERF_USER_STACK_DUMP
97 select HAVE_RCU_TABLE_FREE if SMP && ARM_LPAE
98 select HAVE_REGS_AND_STACK_ACCESS_API
100 select HAVE_STACKPROTECTOR
101 select HAVE_SYSCALL_TRACEPOINTS
103 select HAVE_VIRT_CPU_ACCOUNTING_GEN
104 select IRQ_FORCED_THREADING
105 select MODULES_USE_ELF_REL
106 select NEED_DMA_MAP_STATE
107 select OF_EARLY_FLATTREE if OF
109 select OLD_SIGSUSPEND3
110 select PCI_SYSCALL if PCI
111 select PERF_USE_VMALLOC
114 select SYS_SUPPORTS_APM_EMULATION
115 # Above selects are sorted alphabetically; please add new ones
116 # according to that. Thanks.
118 The ARM series is a line of low-power-consumption RISC chip designs
119 licensed by ARM Ltd and targeted at embedded applications and
120 handhelds such as the Compaq IPAQ. ARM-based PCs are no longer
121 manufactured, but legacy ARM-based PC hardware remains popular in
122 Europe. There is an ARM Linux project with a web page at
123 <http://www.arm.linux.org.uk/>.
125 config ARM_HAS_SG_CHAIN
128 config ARM_DMA_USE_IOMMU
130 select ARM_HAS_SG_CHAIN
131 select NEED_SG_DMA_LENGTH
135 config ARM_DMA_IOMMU_ALIGNMENT
136 int "Maximum PAGE_SIZE order of alignment for DMA IOMMU buffers"
140 DMA mapping framework by default aligns all buffers to the smallest
141 PAGE_SIZE order which is greater than or equal to the requested buffer
142 size. This works well for buffers up to a few hundreds kilobytes, but
143 for larger buffers it just a waste of address space. Drivers which has
144 relatively small addressing window (like 64Mib) might run out of
145 virtual space with just a few allocations.
147 With this parameter you can specify the maximum PAGE_SIZE order for
148 DMA IOMMU buffers. Larger buffers will be aligned only to this
149 specified order. The order is expressed as a power of two multiplied
154 config SYS_SUPPORTS_APM_EMULATION
159 select GENERIC_ALLOCATOR
170 config STACKTRACE_SUPPORT
174 config LOCKDEP_SUPPORT
178 config TRACE_IRQFLAGS_SUPPORT
182 config ARCH_HAS_ILOG2_U32
185 config ARCH_HAS_ILOG2_U64
188 config ARCH_HAS_BANDGAP
191 config FIX_EARLYCON_MEM
194 config GENERIC_HWEIGHT
198 config GENERIC_CALIBRATE_DELAY
202 config ARCH_MAY_HAVE_PC_FDC
208 config ARCH_SUPPORTS_UPROBES
211 config ARCH_HAS_DMA_SET_COHERENT_MASK
214 config GENERIC_ISA_DMA
220 config NEED_RET_TO_USER
226 config ARM_PATCH_PHYS_VIRT
227 bool "Patch physical to virtual translations at runtime" if EMBEDDED
229 depends on !XIP_KERNEL && MMU
231 Patch phys-to-virt and virt-to-phys translation functions at
232 boot and module load time according to the position of the
233 kernel in system memory.
235 This can only be used with non-XIP MMU kernels where the base
236 of physical memory is at a 16MB boundary.
238 Only disable this option if you know that you do not require
239 this feature (eg, building a kernel for a single machine) and
240 you need to shrink the kernel to the minimal size.
242 config NEED_MACH_IO_H
245 Select this when mach/io.h is required to provide special
246 definitions for this platform. The need for mach/io.h should
247 be avoided when possible.
249 config NEED_MACH_MEMORY_H
252 Select this when mach/memory.h is required to provide special
253 definitions for this platform. The need for mach/memory.h should
254 be avoided when possible.
257 hex "Physical address of main memory" if MMU
258 depends on !ARM_PATCH_PHYS_VIRT
259 default DRAM_BASE if !MMU
260 default 0x00000000 if ARCH_EBSA110 || \
266 default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
267 default 0x20000000 if ARCH_S5PV210
268 default 0xc0000000 if ARCH_SA1100
270 Please provide the physical address corresponding to the
271 location of main memory in your system.
277 config PGTABLE_LEVELS
279 default 3 if ARM_LPAE
285 bool "MMU-based Paged Memory Management Support"
288 Select if you want MMU-based virtualised addressing space
289 support by paged memory management. If unsure, say 'Y'.
291 config ARCH_MMAP_RND_BITS_MIN
294 config ARCH_MMAP_RND_BITS_MAX
295 default 14 if PAGE_OFFSET=0x40000000
296 default 15 if PAGE_OFFSET=0x80000000
300 # The "ARM system type" choice list is ordered alphabetically by option
301 # text. Please add new entries in the option alphabetic order.
304 prompt "ARM system type"
305 default ARM_SINGLE_ARMV7M if !MMU
306 default ARCH_MULTIPLATFORM if MMU
308 config ARCH_MULTIPLATFORM
309 bool "Allow multiple platforms to be selected"
311 select ARM_HAS_SG_CHAIN
312 select ARM_PATCH_PHYS_VIRT
316 select GENERIC_CLOCKEVENTS
317 select GENERIC_IRQ_MULTI_HANDLER
319 select PCI_DOMAINS_GENERIC if PCI
323 config ARM_SINGLE_ARMV7M
324 bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
331 select GENERIC_CLOCKEVENTS
338 select ARCH_USES_GETTIMEOFFSET
341 select NEED_MACH_IO_H
342 select NEED_MACH_MEMORY_H
345 This is an evaluation board for the StrongARM processor available
346 from Digital. It has limited hardware on-board, including an
347 Ethernet interface, two PCMCIA sockets, two serial ports and a
352 select ARCH_SPARSEMEM_ENABLE
354 imply ARM_PATCH_PHYS_VIRT
360 select GENERIC_CLOCKEVENTS
363 This enables support for the Cirrus EP93xx series of CPUs.
365 config ARCH_FOOTBRIDGE
369 select GENERIC_CLOCKEVENTS
371 select NEED_MACH_IO_H if !MMU
372 select NEED_MACH_MEMORY_H
374 Support for systems based on the DC21285 companion chip
375 ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
378 bool "Hilscher NetX based"
382 select GENERIC_CLOCKEVENTS
384 This enables support for systems based on the Hilscher NetX Soc
390 select NEED_MACH_MEMORY_H
391 select NEED_RET_TO_USER
397 Support for Intel's IOP13XX (XScale) family of processors.
405 select NEED_RET_TO_USER
409 Support for Intel's 80219 and IOP32X (XScale) family of
418 select NEED_RET_TO_USER
422 Support for Intel's IOP33X (XScale) family of processors.
427 select ARCH_HAS_DMA_SET_COHERENT_MASK
428 select ARCH_SUPPORTS_BIG_ENDIAN
430 select DMABOUNCE if PCI
431 select GENERIC_CLOCKEVENTS
432 select GENERIC_IRQ_MULTI_HANDLER
438 select NEED_MACH_IO_H
439 select USB_EHCI_BIG_ENDIAN_DESC
440 select USB_EHCI_BIG_ENDIAN_MMIO
442 Support for Intel's IXP4XX (XScale) family of processors.
447 select GENERIC_CLOCKEVENTS
448 select GENERIC_IRQ_MULTI_HANDLER
454 select PLAT_ORION_LEGACY
456 select PM_GENERIC_DOMAINS if PM
458 Support for the Marvell Dove SoC 88AP510
461 bool "Micrel/Kendin KS8695"
464 select GENERIC_CLOCKEVENTS
466 select NEED_MACH_MEMORY_H
468 Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
469 System-on-Chip devices.
472 bool "Nuvoton W90X900 CPU"
476 select GENERIC_CLOCKEVENTS
479 Support for Nuvoton (Winbond logic dept.) ARM9 processor,
480 At present, the w90x900 has been renamed nuc900, regarding
481 the ARM series product line, you can login the following
482 link address to know more.
484 <http://www.nuvoton.com/hq/enu/ProductAndSales/ProductLines/
485 ConsumerElectronicsIC/ARMMicrocontroller/ARMMicrocontroller>
491 select CLKSRC_LPC32XX
494 select GENERIC_CLOCKEVENTS
495 select GENERIC_IRQ_MULTI_HANDLER
500 Support for the NXP LPC32XX family of processors
503 bool "PXA2xx/PXA3xx-based"
506 select ARM_CPU_SUSPEND if PM
513 select CPU_XSCALE if !CPU_XSC3
514 select GENERIC_CLOCKEVENTS
515 select GENERIC_IRQ_MULTI_HANDLER
523 Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
529 select ARCH_MAY_HAVE_PC_FDC
530 select ARCH_SPARSEMEM_ENABLE
531 select ARCH_USES_GETTIMEOFFSET
535 select HAVE_PATA_PLATFORM
537 select NEED_MACH_IO_H
538 select NEED_MACH_MEMORY_H
541 On the Acorn Risc-PC, Linux can support the internal IDE disk and
542 CD-ROM interface, serial and parallel port, and the floppy drive.
547 select ARCH_SPARSEMEM_ENABLE
551 select TIMER_OF if OF
554 select GENERIC_CLOCKEVENTS
555 select GENERIC_IRQ_MULTI_HANDLER
560 select NEED_MACH_MEMORY_H
563 Support for StrongARM 11x0 based boards.
566 bool "Samsung S3C24XX SoCs"
569 select CLKSRC_SAMSUNG_PWM
570 select GENERIC_CLOCKEVENTS
573 select GENERIC_IRQ_MULTI_HANDLER
574 select HAVE_S3C2410_I2C if I2C
575 select HAVE_S3C2410_WATCHDOG if WATCHDOG
576 select HAVE_S3C_RTC if RTC_CLASS
577 select NEED_MACH_IO_H
581 Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443
582 and S3C2450 SoCs based systems, such as the Simtec Electronics BAST
583 (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the
584 Samsung SMDK2410 development board (and derivatives).
588 select ARCH_HAS_HOLES_MEMORYMODEL
591 select GENERIC_ALLOCATOR
592 select GENERIC_CLOCKEVENTS
593 select GENERIC_IRQ_CHIP
594 select GENERIC_IRQ_MULTI_HANDLER
597 select PM_GENERIC_DOMAINS if PM
598 select PM_GENERIC_DOMAINS_OF if PM && OF
600 select RESET_CONTROLLER
605 Support for TI's DaVinci platform.
610 select ARCH_HAS_HOLES_MEMORYMODEL
614 select GENERIC_CLOCKEVENTS
615 select GENERIC_IRQ_CHIP
616 select GENERIC_IRQ_MULTI_HANDLER
620 select NEED_MACH_IO_H if PCCARD
621 select NEED_MACH_MEMORY_H
624 Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
628 menu "Multiple platform selection"
629 depends on ARCH_MULTIPLATFORM
631 comment "CPU Core family selection"
634 bool "ARMv4 based platforms (FA526)"
635 depends on !ARCH_MULTI_V6_V7
636 select ARCH_MULTI_V4_V5
639 config ARCH_MULTI_V4T
640 bool "ARMv4T based platforms (ARM720T, ARM920T, ...)"
641 depends on !ARCH_MULTI_V6_V7
642 select ARCH_MULTI_V4_V5
643 select CPU_ARM920T if !(CPU_ARM7TDMI || CPU_ARM720T || \
644 CPU_ARM740T || CPU_ARM9TDMI || CPU_ARM922T || \
645 CPU_ARM925T || CPU_ARM940T)
648 bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)"
649 depends on !ARCH_MULTI_V6_V7
650 select ARCH_MULTI_V4_V5
651 select CPU_ARM926T if !(CPU_ARM946E || CPU_ARM1020 || \
652 CPU_ARM1020E || CPU_ARM1022 || CPU_ARM1026 || \
653 CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_FEROCEON)
655 config ARCH_MULTI_V4_V5
659 bool "ARMv6 based platforms (ARM11)"
660 select ARCH_MULTI_V6_V7
664 bool "ARMv7 based platforms (Cortex-A, PJ4, Scorpion, Krait)"
666 select ARCH_MULTI_V6_V7
670 config ARCH_MULTI_V6_V7
672 select MIGHT_HAVE_CACHE_L2X0
674 config ARCH_MULTI_CPU_AUTO
675 def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7)
681 bool "Dummy Virtual Machine"
682 depends on ARCH_MULTI_V7
685 select ARM_GIC_V2M if PCI
687 select ARM_GIC_V3_ITS if PCI
689 select HAVE_ARM_ARCH_TIMER
690 select ARCH_SUPPORTS_BIG_ENDIAN
693 # This is sorted alphabetically by mach-* pathname. However, plat-*
694 # Kconfigs may be included either alphabetically (according to the
695 # plat- suffix) or along side the corresponding mach-* source.
697 source "arch/arm/mach-actions/Kconfig"
699 source "arch/arm/mach-alpine/Kconfig"
701 source "arch/arm/mach-artpec/Kconfig"
703 source "arch/arm/mach-asm9260/Kconfig"
705 source "arch/arm/mach-aspeed/Kconfig"
707 source "arch/arm/mach-at91/Kconfig"
709 source "arch/arm/mach-axxia/Kconfig"
711 source "arch/arm/mach-bcm/Kconfig"
713 source "arch/arm/mach-berlin/Kconfig"
715 source "arch/arm/mach-clps711x/Kconfig"
717 source "arch/arm/mach-cns3xxx/Kconfig"
719 source "arch/arm/mach-davinci/Kconfig"
721 source "arch/arm/mach-digicolor/Kconfig"
723 source "arch/arm/mach-dove/Kconfig"
725 source "arch/arm/mach-ep93xx/Kconfig"
727 source "arch/arm/mach-exynos/Kconfig"
728 source "arch/arm/plat-samsung/Kconfig"
730 source "arch/arm/mach-footbridge/Kconfig"
732 source "arch/arm/mach-gemini/Kconfig"
734 source "arch/arm/mach-highbank/Kconfig"
736 source "arch/arm/mach-hisi/Kconfig"
738 source "arch/arm/mach-imx/Kconfig"
740 source "arch/arm/mach-integrator/Kconfig"
742 source "arch/arm/mach-iop13xx/Kconfig"
744 source "arch/arm/mach-iop32x/Kconfig"
746 source "arch/arm/mach-iop33x/Kconfig"
748 source "arch/arm/mach-ixp4xx/Kconfig"
750 source "arch/arm/mach-keystone/Kconfig"
752 source "arch/arm/mach-ks8695/Kconfig"
754 source "arch/arm/mach-mediatek/Kconfig"
756 source "arch/arm/mach-meson/Kconfig"
758 source "arch/arm/mach-milbeaut/Kconfig"
760 source "arch/arm/mach-mmp/Kconfig"
762 source "arch/arm/mach-moxart/Kconfig"
764 source "arch/arm/mach-mv78xx0/Kconfig"
766 source "arch/arm/mach-mvebu/Kconfig"
768 source "arch/arm/mach-mxs/Kconfig"
770 source "arch/arm/mach-netx/Kconfig"
772 source "arch/arm/mach-nomadik/Kconfig"
774 source "arch/arm/mach-npcm/Kconfig"
776 source "arch/arm/mach-nspire/Kconfig"
778 source "arch/arm/plat-omap/Kconfig"
780 source "arch/arm/mach-omap1/Kconfig"
782 source "arch/arm/mach-omap2/Kconfig"
784 source "arch/arm/mach-orion5x/Kconfig"
786 source "arch/arm/mach-oxnas/Kconfig"
788 source "arch/arm/mach-picoxcell/Kconfig"
790 source "arch/arm/mach-prima2/Kconfig"
792 source "arch/arm/mach-pxa/Kconfig"
793 source "arch/arm/plat-pxa/Kconfig"
795 source "arch/arm/mach-qcom/Kconfig"
797 source "arch/arm/mach-rda/Kconfig"
799 source "arch/arm/mach-realview/Kconfig"
801 source "arch/arm/mach-rockchip/Kconfig"
803 source "arch/arm/mach-s3c24xx/Kconfig"
805 source "arch/arm/mach-s3c64xx/Kconfig"
807 source "arch/arm/mach-s5pv210/Kconfig"
809 source "arch/arm/mach-sa1100/Kconfig"
811 source "arch/arm/mach-shmobile/Kconfig"
813 source "arch/arm/mach-socfpga/Kconfig"
815 source "arch/arm/mach-spear/Kconfig"
817 source "arch/arm/mach-sti/Kconfig"
819 source "arch/arm/mach-stm32/Kconfig"
821 source "arch/arm/mach-sunxi/Kconfig"
823 source "arch/arm/mach-tango/Kconfig"
825 source "arch/arm/mach-tegra/Kconfig"
827 source "arch/arm/mach-u300/Kconfig"
829 source "arch/arm/mach-uniphier/Kconfig"
831 source "arch/arm/mach-ux500/Kconfig"
833 source "arch/arm/mach-versatile/Kconfig"
835 source "arch/arm/mach-vexpress/Kconfig"
836 source "arch/arm/plat-versatile/Kconfig"
838 source "arch/arm/mach-vt8500/Kconfig"
840 source "arch/arm/mach-w90x900/Kconfig"
842 source "arch/arm/mach-zx/Kconfig"
844 source "arch/arm/mach-zynq/Kconfig"
846 # ARMv7-M architecture
848 bool "Energy Micro efm32"
849 depends on ARM_SINGLE_ARMV7M
852 Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
856 bool "NXP LPC18xx/LPC43xx"
857 depends on ARM_SINGLE_ARMV7M
858 select ARCH_HAS_RESET_CONTROLLER
860 select CLKSRC_LPC32XX
863 Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
864 high performance microcontrollers.
867 bool "ARM MPS2 platform"
868 depends on ARM_SINGLE_ARMV7M
872 Support for Cortex-M Prototyping System (or V2M-MPS2) which comes
873 with a range of available cores like Cortex-M3/M4/M7.
875 Please, note that depends which Application Note is used memory map
876 for the platform may vary, so adjustment of RAM base might be needed.
878 # Definitions to make life easier
884 select GENERIC_CLOCKEVENTS
890 select GENERIC_IRQ_CHIP
893 config PLAT_ORION_LEGACY
900 config PLAT_VERSATILE
903 source "arch/arm/mm/Kconfig"
906 bool "Enable iWMMXt support"
907 depends on CPU_XSCALE || CPU_XSC3 || CPU_MOHAWK || CPU_PJ4 || CPU_PJ4B
908 default y if PXA27x || PXA3xx || ARCH_MMP || CPU_PJ4 || CPU_PJ4B
910 Enable support for iWMMXt context switching at run time if
911 running on a CPU that supports it.
914 source "arch/arm/Kconfig-nommu"
917 config PJ4B_ERRATA_4742
918 bool "PJ4B Errata 4742: IDLE Wake Up Commands can Cause the CPU Core to Cease Operation"
919 depends on CPU_PJ4B && MACH_ARMADA_370
922 When coming out of either a Wait for Interrupt (WFI) or a Wait for
923 Event (WFE) IDLE states, a specific timing sensitivity exists between
924 the retiring WFI/WFE instructions and the newly issued subsequent
925 instructions. This sensitivity can result in a CPU hang scenario.
927 The software must insert either a Data Synchronization Barrier (DSB)
928 or Data Memory Barrier (DMB) command immediately after the WFI/WFE
931 config ARM_ERRATA_326103
932 bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
935 Executing a SWP instruction to read-only memory does not set bit 11
936 of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
937 treat the access as a read, preventing a COW from occurring and
938 causing the faulting task to livelock.
940 config ARM_ERRATA_411920
941 bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
942 depends on CPU_V6 || CPU_V6K
944 Invalidation of the Instruction Cache operation can
945 fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
946 It does not affect the MPCore. This option enables the ARM Ltd.
947 recommended workaround.
949 config ARM_ERRATA_430973
950 bool "ARM errata: Stale prediction on replaced interworking branch"
953 This option enables the workaround for the 430973 Cortex-A8
954 r1p* erratum. If a code sequence containing an ARM/Thumb
955 interworking branch is replaced with another code sequence at the
956 same virtual address, whether due to self-modifying code or virtual
957 to physical address re-mapping, Cortex-A8 does not recover from the
958 stale interworking branch prediction. This results in Cortex-A8
959 executing the new code sequence in the incorrect ARM or Thumb state.
960 The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
961 and also flushes the branch target cache at every context switch.
962 Note that setting specific bits in the ACTLR register may not be
963 available in non-secure mode.
965 config ARM_ERRATA_458693
966 bool "ARM errata: Processor deadlock when a false hazard is created"
968 depends on !ARCH_MULTIPLATFORM
970 This option enables the workaround for the 458693 Cortex-A8 (r2p0)
971 erratum. For very specific sequences of memory operations, it is
972 possible for a hazard condition intended for a cache line to instead
973 be incorrectly associated with a different cache line. This false
974 hazard might then cause a processor deadlock. The workaround enables
975 the L1 caching of the NEON accesses and disables the PLD instruction
976 in the ACTLR register. Note that setting specific bits in the ACTLR
977 register may not be available in non-secure mode.
979 config ARM_ERRATA_460075
980 bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
982 depends on !ARCH_MULTIPLATFORM
984 This option enables the workaround for the 460075 Cortex-A8 (r2p0)
985 erratum. Any asynchronous access to the L2 cache may encounter a
986 situation in which recent store transactions to the L2 cache are lost
987 and overwritten with stale memory contents from external memory. The
988 workaround disables the write-allocate mode for the L2 cache via the
989 ACTLR register. Note that setting specific bits in the ACTLR register
990 may not be available in non-secure mode.
992 config ARM_ERRATA_742230
993 bool "ARM errata: DMB operation may be faulty"
994 depends on CPU_V7 && SMP
995 depends on !ARCH_MULTIPLATFORM
997 This option enables the workaround for the 742230 Cortex-A9
998 (r1p0..r2p2) erratum. Under rare circumstances, a DMB instruction
999 between two write operations may not ensure the correct visibility
1000 ordering of the two writes. This workaround sets a specific bit in
1001 the diagnostic register of the Cortex-A9 which causes the DMB
1002 instruction to behave as a DSB, ensuring the correct behaviour of
1005 config ARM_ERRATA_742231
1006 bool "ARM errata: Incorrect hazard handling in the SCU may lead to data corruption"
1007 depends on CPU_V7 && SMP
1008 depends on !ARCH_MULTIPLATFORM
1010 This option enables the workaround for the 742231 Cortex-A9
1011 (r2p0..r2p2) erratum. Under certain conditions, specific to the
1012 Cortex-A9 MPCore micro-architecture, two CPUs working in SMP mode,
1013 accessing some data located in the same cache line, may get corrupted
1014 data due to bad handling of the address hazard when the line gets
1015 replaced from one of the CPUs at the same time as another CPU is
1016 accessing it. This workaround sets specific bits in the diagnostic
1017 register of the Cortex-A9 which reduces the linefill issuing
1018 capabilities of the processor.
1020 config ARM_ERRATA_643719
1021 bool "ARM errata: LoUIS bit field in CLIDR register is incorrect"
1022 depends on CPU_V7 && SMP
1025 This option enables the workaround for the 643719 Cortex-A9 (prior to
1026 r1p0) erratum. On affected cores the LoUIS bit field of the CLIDR
1027 register returns zero when it should return one. The workaround
1028 corrects this value, ensuring cache maintenance operations which use
1029 it behave as intended and avoiding data corruption.
1031 config ARM_ERRATA_720789
1032 bool "ARM errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID"
1035 This option enables the workaround for the 720789 Cortex-A9 (prior to
1036 r2p0) erratum. A faulty ASID can be sent to the other CPUs for the
1037 broadcasted CP15 TLB maintenance operations TLBIASIDIS and TLBIMVAIS.
1038 As a consequence of this erratum, some TLB entries which should be
1039 invalidated are not, resulting in an incoherency in the system page
1040 tables. The workaround changes the TLB flushing routines to invalidate
1041 entries regardless of the ASID.
1043 config ARM_ERRATA_743622
1044 bool "ARM errata: Faulty hazard checking in the Store Buffer may lead to data corruption"
1046 depends on !ARCH_MULTIPLATFORM
1048 This option enables the workaround for the 743622 Cortex-A9
1049 (r2p*) erratum. Under very rare conditions, a faulty
1050 optimisation in the Cortex-A9 Store Buffer may lead to data
1051 corruption. This workaround sets a specific bit in the diagnostic
1052 register of the Cortex-A9 which disables the Store Buffer
1053 optimisation, preventing the defect from occurring. This has no
1054 visible impact on the overall performance or power consumption of the
1057 config ARM_ERRATA_751472
1058 bool "ARM errata: Interrupted ICIALLUIS may prevent completion of broadcasted operation"
1060 depends on !ARCH_MULTIPLATFORM
1062 This option enables the workaround for the 751472 Cortex-A9 (prior
1063 to r3p0) erratum. An interrupted ICIALLUIS operation may prevent the
1064 completion of a following broadcasted operation if the second
1065 operation is received by a CPU before the ICIALLUIS has completed,
1066 potentially leading to corrupted entries in the cache or TLB.
1068 config ARM_ERRATA_754322
1069 bool "ARM errata: possible faulty MMU translations following an ASID switch"
1072 This option enables the workaround for the 754322 Cortex-A9 (r2p*,
1073 r3p*) erratum. A speculative memory access may cause a page table walk
1074 which starts prior to an ASID switch but completes afterwards. This
1075 can populate the micro-TLB with a stale entry which may be hit with
1076 the new ASID. This workaround places two dsb instructions in the mm
1077 switching code so that no page table walks can cross the ASID switch.
1079 config ARM_ERRATA_754327
1080 bool "ARM errata: no automatic Store Buffer drain"
1081 depends on CPU_V7 && SMP
1083 This option enables the workaround for the 754327 Cortex-A9 (prior to
1084 r2p0) erratum. The Store Buffer does not have any automatic draining
1085 mechanism and therefore a livelock may occur if an external agent
1086 continuously polls a memory location waiting to observe an update.
1087 This workaround defines cpu_relax() as smp_mb(), preventing correctly
1088 written polling loops from denying visibility of updates to memory.
1090 config ARM_ERRATA_364296
1091 bool "ARM errata: Possible cache data corruption with hit-under-miss enabled"
1094 This options enables the workaround for the 364296 ARM1136
1095 r0p2 erratum (possible cache data corruption with
1096 hit-under-miss enabled). It sets the undocumented bit 31 in
1097 the auxiliary control register and the FI bit in the control
1098 register, thus disabling hit-under-miss without putting the
1099 processor into full low interrupt latency mode. ARM11MPCore
1102 config ARM_ERRATA_764369
1103 bool "ARM errata: Data cache line maintenance operation by MVA may not succeed"
1104 depends on CPU_V7 && SMP
1106 This option enables the workaround for erratum 764369
1107 affecting Cortex-A9 MPCore with two or more processors (all
1108 current revisions). Under certain timing circumstances, a data
1109 cache line maintenance operation by MVA targeting an Inner
1110 Shareable memory region may fail to proceed up to either the
1111 Point of Coherency or to the Point of Unification of the
1112 system. This workaround adds a DSB instruction before the
1113 relevant cache maintenance functions and sets a specific bit
1114 in the diagnostic control register of the SCU.
1116 config ARM_ERRATA_775420
1117 bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock"
1120 This option enables the workaround for the 775420 Cortex-A9 (r2p2,
1121 r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance
1122 operation aborts with MMU exception, it might cause the processor
1123 to deadlock. This workaround puts DSB before executing ISB if
1124 an abort may occur on cache maintenance.
1126 config ARM_ERRATA_798181
1127 bool "ARM errata: TLBI/DSB failure on Cortex-A15"
1128 depends on CPU_V7 && SMP
1130 On Cortex-A15 (r0p0..r3p2) the TLBI*IS/DSB operations are not
1131 adequately shooting down all use of the old entries. This
1132 option enables the Linux kernel workaround for this erratum
1133 which sends an IPI to the CPUs that are running the same ASID
1134 as the one being invalidated.
1136 config ARM_ERRATA_773022
1137 bool "ARM errata: incorrect instructions may be executed from loop buffer"
1140 This option enables the workaround for the 773022 Cortex-A15
1141 (up to r0p4) erratum. In certain rare sequences of code, the
1142 loop buffer may deliver incorrect instructions. This
1143 workaround disables the loop buffer to avoid the erratum.
1145 config ARM_ERRATA_818325_852422
1146 bool "ARM errata: A12: some seqs of opposed cond code instrs => deadlock or corruption"
1149 This option enables the workaround for:
1150 - Cortex-A12 818325: Execution of an UNPREDICTABLE STR or STM
1151 instruction might deadlock. Fixed in r0p1.
1152 - Cortex-A12 852422: Execution of a sequence of instructions might
1153 lead to either a data corruption or a CPU deadlock. Not fixed in
1154 any Cortex-A12 cores yet.
1155 This workaround for all both errata involves setting bit[12] of the
1156 Feature Register. This bit disables an optimisation applied to a
1157 sequence of 2 instructions that use opposing condition codes.
1159 config ARM_ERRATA_821420
1160 bool "ARM errata: A12: sequence of VMOV to core registers might lead to a dead lock"
1163 This option enables the workaround for the 821420 Cortex-A12
1164 (all revs) erratum. In very rare timing conditions, a sequence
1165 of VMOV to Core registers instructions, for which the second
1166 one is in the shadow of a branch or abort, can lead to a
1167 deadlock when the VMOV instructions are issued out-of-order.
1169 config ARM_ERRATA_825619
1170 bool "ARM errata: A12: DMB NSHST/ISHST mixed ... might cause deadlock"
1173 This option enables the workaround for the 825619 Cortex-A12
1174 (all revs) erratum. Within rare timing constraints, executing a
1175 DMB NSHST or DMB ISHST instruction followed by a mix of Cacheable
1176 and Device/Strongly-Ordered loads and stores might cause deadlock
1178 config ARM_ERRATA_852421
1179 bool "ARM errata: A17: DMB ST might fail to create order between stores"
1182 This option enables the workaround for the 852421 Cortex-A17
1183 (r1p0, r1p1, r1p2) erratum. Under very rare timing conditions,
1184 execution of a DMB ST instruction might fail to properly order
1185 stores from GroupA and stores from GroupB.
1187 config ARM_ERRATA_852423
1188 bool "ARM errata: A17: some seqs of opposed cond code instrs => deadlock or corruption"
1191 This option enables the workaround for:
1192 - Cortex-A17 852423: Execution of a sequence of instructions might
1193 lead to either a data corruption or a CPU deadlock. Not fixed in
1194 any Cortex-A17 cores yet.
1195 This is identical to Cortex-A12 erratum 852422. It is a separate
1196 config option from the A12 erratum due to the way errata are checked
1201 source "arch/arm/common/Kconfig"
1208 Find out whether you have ISA slots on your motherboard. ISA is the
1209 name of a bus system, i.e. the way the CPU talks to the other stuff
1210 inside your box. Other bus systems are PCI, EISA, MicroChannel
1211 (MCA) or VESA. ISA is an older system, now being displaced by PCI;
1212 newer boards don't support it. If you have ISA, say Y, otherwise N.
1214 # Select ISA DMA controller support
1219 # Select ISA DMA interface
1223 config PCI_NANOENGINE
1224 bool "BSE nanoEngine PCI support"
1225 depends on SA1100_NANOENGINE
1227 Enable PCI on the BSE nanoEngine board.
1229 config PCI_HOST_ITE8152
1231 depends on PCI && MACH_ARMCORE
1237 menu "Kernel Features"
1242 This option should be selected by machines which have an SMP-
1245 The only effect of this option is to make the SMP-related
1246 options available to the user for configuration.
1249 bool "Symmetric Multi-Processing"
1250 depends on CPU_V6K || CPU_V7
1251 depends on GENERIC_CLOCKEVENTS
1253 depends on MMU || ARM_MPU
1256 This enables support for systems with more than one CPU. If you have
1257 a system with only one CPU, say N. If you have a system with more
1258 than one CPU, say Y.
1260 If you say N here, the kernel will run on uni- and multiprocessor
1261 machines, but will use only one CPU of a multiprocessor machine. If
1262 you say Y here, the kernel will run on many, but not all,
1263 uniprocessor machines. On a uniprocessor machine, the kernel
1264 will run faster if you say N here.
1266 See also <file:Documentation/x86/i386/IO-APIC.txt>,
1267 <file:Documentation/lockup-watchdogs.txt> and the SMP-HOWTO available at
1268 <http://tldp.org/HOWTO/SMP-HOWTO.html>.
1270 If you don't know what to do here, say N.
1273 bool "Allow booting SMP kernel on uniprocessor systems"
1274 depends on SMP && !XIP_KERNEL && MMU
1277 SMP kernels contain instructions which fail on non-SMP processors.
1278 Enabling this option allows the kernel to modify itself to make
1279 these instructions safe. Disabling it allows about 1K of space
1282 If you don't know what to do here, say Y.
1284 config ARM_CPU_TOPOLOGY
1285 bool "Support cpu topology definition"
1286 depends on SMP && CPU_V7
1289 Support ARM cpu topology definition. The MPIDR register defines
1290 affinity between processors which is then used to describe the cpu
1291 topology of an ARM System.
1294 bool "Multi-core scheduler support"
1295 depends on ARM_CPU_TOPOLOGY
1297 Multi-core scheduler support improves the CPU scheduler's decision
1298 making when dealing with multi-core CPU chips at a cost of slightly
1299 increased overhead in some places. If unsure say N here.
1302 bool "SMT scheduler support"
1303 depends on ARM_CPU_TOPOLOGY
1305 Improves the CPU scheduler's decision making when dealing with
1306 MultiThreading at a cost of slightly increased overhead in some
1307 places. If unsure say N here.
1312 This option enables support for the ARM snoop control unit
1314 config HAVE_ARM_ARCH_TIMER
1315 bool "Architected timer support"
1317 select ARM_ARCH_TIMER
1318 select GENERIC_CLOCKEVENTS
1320 This option enables support for the ARM architected timer
1325 This options enables support for the ARM timer and watchdog unit
1328 bool "Multi-Cluster Power Management"
1329 depends on CPU_V7 && SMP
1331 This option provides the common power management infrastructure
1332 for (multi-)cluster based systems, such as big.LITTLE based
1335 config MCPM_QUAD_CLUSTER
1339 To avoid wasting resources unnecessarily, MCPM only supports up
1340 to 2 clusters by default.
1341 Platforms with 3 or 4 clusters that use MCPM must select this
1342 option to allow the additional clusters to be managed.
1345 bool "big.LITTLE support (Experimental)"
1346 depends on CPU_V7 && SMP
1349 This option enables support selections for the big.LITTLE
1350 system architecture.
1353 bool "big.LITTLE switcher support"
1354 depends on BIG_LITTLE && MCPM && HOTPLUG_CPU && ARM_GIC
1357 The big.LITTLE "switcher" provides the core functionality to
1358 transparently handle transition between a cluster of A15's
1359 and a cluster of A7's in a big.LITTLE system.
1361 config BL_SWITCHER_DUMMY_IF
1362 tristate "Simple big.LITTLE switcher user interface"
1363 depends on BL_SWITCHER && DEBUG_KERNEL
1365 This is a simple and dummy char dev interface to control
1366 the big.LITTLE switcher core code. It is meant for
1367 debugging purposes only.
1370 prompt "Memory split"
1374 Select the desired split between kernel and user memory.
1376 If you are not absolutely sure what you are doing, leave this
1380 bool "3G/1G user/kernel split"
1381 config VMSPLIT_3G_OPT
1382 depends on !ARM_LPAE
1383 bool "3G/1G user/kernel split (for full 1G low memory)"
1385 bool "2G/2G user/kernel split"
1387 bool "1G/3G user/kernel split"
1392 default PHYS_OFFSET if !MMU
1393 default 0x40000000 if VMSPLIT_1G
1394 default 0x80000000 if VMSPLIT_2G
1395 default 0xB0000000 if VMSPLIT_3G_OPT
1399 int "Maximum number of CPUs (2-32)"
1405 bool "Support for hot-pluggable CPUs"
1407 select GENERIC_IRQ_MIGRATION
1409 Say Y here to experiment with turning CPUs off and on. CPUs
1410 can be controlled through /sys/devices/system/cpu.
1413 bool "Support for the ARM Power State Coordination Interface (PSCI)"
1414 depends on HAVE_ARM_SMCCC
1417 Say Y here if you want Linux to communicate with system firmware
1418 implementing the PSCI specification for CPU-centric power
1419 management operations described in ARM document number ARM DEN
1420 0022A ("Power State Coordination Interface System Software on
1423 # The GPIO number here must be sorted by descending number. In case of
1424 # a multiplatform kernel, we just want the highest value required by the
1425 # selected platforms.
1428 default 2048 if ARCH_SOCFPGA
1429 default 1024 if ARCH_BRCMSTB || ARCH_RENESAS || ARCH_TEGRA || \
1431 default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
1432 SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
1433 default 416 if ARCH_SUNXI
1434 default 392 if ARCH_U8500
1435 default 352 if ARCH_VT8500
1436 default 288 if ARCH_ROCKCHIP
1437 default 264 if MACH_H4700
1440 Maximum number of GPIOs in the system.
1442 If unsure, leave the default value.
1446 default 200 if ARCH_EBSA110
1447 default 128 if SOC_AT91RM9200
1451 depends on HZ_FIXED = 0
1452 prompt "Timer frequency"
1476 default HZ_FIXED if HZ_FIXED != 0
1477 default 100 if HZ_100
1478 default 200 if HZ_200
1479 default 250 if HZ_250
1480 default 300 if HZ_300
1481 default 500 if HZ_500
1485 def_bool HIGH_RES_TIMERS
1487 config THUMB2_KERNEL
1488 bool "Compile the kernel in Thumb-2 mode" if !CPU_THUMBONLY
1489 depends on (CPU_V7 || CPU_V7M) && !CPU_V6 && !CPU_V6K
1490 default y if CPU_THUMBONLY
1493 By enabling this option, the kernel will be compiled in
1498 config THUMB2_AVOID_R_ARM_THM_JUMP11
1499 bool "Work around buggy Thumb-2 short branch relocations in gas"
1500 depends on THUMB2_KERNEL && MODULES
1503 Various binutils versions can resolve Thumb-2 branches to
1504 locally-defined, preemptible global symbols as short-range "b.n"
1505 branch instructions.
1507 This is a problem, because there's no guarantee the final
1508 destination of the symbol, or any candidate locations for a
1509 trampoline, are within range of the branch. For this reason, the
1510 kernel does not support fixing up the R_ARM_THM_JUMP11 (102)
1511 relocation in modules at all, and it makes little sense to add
1514 The symptom is that the kernel fails with an "unsupported
1515 relocation" error when loading some modules.
1517 Until fixed tools are available, passing
1518 -fno-optimize-sibling-calls to gcc should prevent gcc generating
1519 code which hits this problem, at the cost of a bit of extra runtime
1520 stack usage in some cases.
1522 The problem is described in more detail at:
1523 https://bugs.launchpad.net/binutils-linaro/+bug/725126
1525 Only Thumb-2 kernels are affected.
1527 Unless you are sure your tools don't have this problem, say Y.
1529 config ARM_PATCH_IDIV
1530 bool "Runtime patch udiv/sdiv instructions into __aeabi_{u}idiv()"
1531 depends on CPU_32v7 && !XIP_KERNEL
1534 The ARM compiler inserts calls to __aeabi_idiv() and
1535 __aeabi_uidiv() when it needs to perform division on signed
1536 and unsigned integers. Some v7 CPUs have support for the sdiv
1537 and udiv instructions that can be used to implement those
1540 Enabling this option allows the kernel to modify itself to
1541 replace the first two instructions of these library functions
1542 with the sdiv or udiv plus "bx lr" instructions when the CPU
1543 it is running on supports them. Typically this will be faster
1544 and less power intensive than running the original library
1545 code to do integer division.
1548 bool "Use the ARM EABI to compile the kernel" if !CPU_V7 && !CPU_V7M && !CPU_V6 && !CPU_V6K
1549 default CPU_V7 || CPU_V7M || CPU_V6 || CPU_V6K
1551 This option allows for the kernel to be compiled using the latest
1552 ARM ABI (aka EABI). This is only useful if you are using a user
1553 space environment that is also compiled with EABI.
1555 Since there are major incompatibilities between the legacy ABI and
1556 EABI, especially with regard to structure member alignment, this
1557 option also changes the kernel syscall calling convention to
1558 disambiguate both ABIs and allow for backward compatibility support
1559 (selected with CONFIG_OABI_COMPAT).
1561 To use this you need GCC version 4.0.0 or later.
1564 bool "Allow old ABI binaries to run with this kernel (EXPERIMENTAL)"
1565 depends on AEABI && !THUMB2_KERNEL
1567 This option preserves the old syscall interface along with the
1568 new (ARM EABI) one. It also provides a compatibility layer to
1569 intercept syscalls that have structure arguments which layout
1570 in memory differs between the legacy ABI and the new ARM EABI
1571 (only for non "thumb" binaries). This option adds a tiny
1572 overhead to all syscalls and produces a slightly larger kernel.
1574 The seccomp filter system will not be available when this is
1575 selected, since there is no way yet to sensibly distinguish
1576 between calling conventions during filtering.
1578 If you know you'll be using only pure EABI user space then you
1579 can say N here. If this option is not selected and you attempt
1580 to execute a legacy ABI binary then the result will be
1581 UNPREDICTABLE (in fact it can be predicted that it won't work
1582 at all). If in doubt say N.
1584 config ARCH_HAS_HOLES_MEMORYMODEL
1587 config ARCH_SPARSEMEM_ENABLE
1590 config ARCH_SPARSEMEM_DEFAULT
1591 def_bool ARCH_SPARSEMEM_ENABLE
1593 config ARCH_SELECT_MEMORY_MODEL
1594 def_bool ARCH_SPARSEMEM_ENABLE
1596 config HAVE_ARCH_PFN_VALID
1597 def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM
1599 config HAVE_GENERIC_GUP
1604 bool "High Memory Support"
1607 The address space of ARM processors is only 4 Gigabytes large
1608 and it has to accommodate user address space, kernel address
1609 space as well as some memory mapped IO. That means that, if you
1610 have a large amount of physical memory and/or IO, not all of the
1611 memory can be "permanently mapped" by the kernel. The physical
1612 memory that is not permanently mapped is called "high memory".
1614 Depending on the selected kernel/user memory split, minimum
1615 vmalloc space and actual amount of RAM, you may not need this
1616 option which should result in a slightly faster kernel.
1621 bool "Allocate 2nd-level pagetables from highmem" if EXPERT
1625 The VM uses one page of physical memory for each page table.
1626 For systems with a lot of processes, this can use a lot of
1627 precious low memory, eventually leading to low memory being
1628 consumed by page tables. Setting this option will allow
1629 user-space 2nd level page tables to reside in high memory.
1631 config CPU_SW_DOMAIN_PAN
1632 bool "Enable use of CPU domains to implement privileged no-access"
1633 depends on MMU && !ARM_LPAE
1636 Increase kernel security by ensuring that normal kernel accesses
1637 are unable to access userspace addresses. This can help prevent
1638 use-after-free bugs becoming an exploitable privilege escalation
1639 by ensuring that magic values (such as LIST_POISON) will always
1640 fault when dereferenced.
1642 CPUs with low-vector mappings use a best-efforts implementation.
1643 Their lower 1MB needs to remain accessible for the vectors, but
1644 the remainder of userspace will become appropriately inaccessible.
1646 config HW_PERF_EVENTS
1650 config SYS_SUPPORTS_HUGETLBFS
1654 config HAVE_ARCH_TRANSPARENT_HUGEPAGE
1658 config ARCH_WANT_GENERAL_HUGETLB
1661 config ARM_MODULE_PLTS
1662 bool "Use PLTs to allow module memory to spill over into vmalloc area"
1666 Allocate PLTs when loading modules so that jumps and calls whose
1667 targets are too far away for their relative offsets to be encoded
1668 in the instructions themselves can be bounced via veneers in the
1669 module's PLT. This allows modules to be allocated in the generic
1670 vmalloc area after the dedicated module memory area has been
1671 exhausted. The modules will use slightly more memory, but after
1672 rounding up to page size, the actual memory footprint is usually
1675 Disabling this is usually safe for small single-platform
1676 configurations. If unsure, say y.
1678 config FORCE_MAX_ZONEORDER
1679 int "Maximum zone order"
1680 default "12" if SOC_AM33XX
1681 default "9" if SA1111 || ARCH_EFM32
1684 The kernel memory allocator divides physically contiguous memory
1685 blocks into "zones", where each zone is a power of two number of
1686 pages. This option selects the largest power of two that the kernel
1687 keeps in the memory allocator. If you need to allocate very large
1688 blocks of physically contiguous memory, then you may need to
1689 increase this value.
1691 This config option is actually maximum order plus one. For example,
1692 a value of 11 means that the largest free memory block is 2^10 pages.
1694 config ALIGNMENT_TRAP
1696 depends on CPU_CP15_MMU
1697 default y if !ARCH_EBSA110
1698 select HAVE_PROC_CPU if PROC_FS
1700 ARM processors cannot fetch/store information which is not
1701 naturally aligned on the bus, i.e., a 4 byte fetch must start at an
1702 address divisible by 4. On 32-bit ARM processors, these non-aligned
1703 fetch/store instructions will be emulated in software if you say
1704 here, which has a severe performance impact. This is necessary for
1705 correct operation of some network protocols. With an IP-only
1706 configuration it is safe to say N, otherwise say Y.
1708 config UACCESS_WITH_MEMCPY
1709 bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()"
1711 default y if CPU_FEROCEON
1713 Implement faster copy_to_user and clear_user methods for CPU
1714 cores where a 8-word STM instruction give significantly higher
1715 memory write throughput than a sequence of individual 32bit stores.
1717 A possible side effect is a slight increase in scheduling latency
1718 between threads sharing the same address space if they invoke
1719 such copy operations with large buffers.
1721 However, if the CPU data cache is using a write-allocate mode,
1722 this option is unlikely to provide any performance gain.
1726 prompt "Enable seccomp to safely compute untrusted bytecode"
1728 This kernel feature is useful for number crunching applications
1729 that may need to compute untrusted bytecode during their
1730 execution. By using pipes or other transports made available to
1731 the process as file descriptors supporting the read/write
1732 syscalls, it's possible to isolate those applications in
1733 their own address space using seccomp. Once seccomp is
1734 enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
1735 and the task is only allowed to execute a few safe syscalls
1736 defined by each seccomp mode.
1739 bool "Enable paravirtualization code"
1741 This changes the kernel so it can modify itself when it is run
1742 under a hypervisor, potentially improving performance significantly
1743 over full virtualization.
1745 config PARAVIRT_TIME_ACCOUNTING
1746 bool "Paravirtual steal time accounting"
1749 Select this option to enable fine granularity task steal time
1750 accounting. Time spent executing other tasks in parallel with
1751 the current vCPU is discounted from the vCPU power. To account for
1752 that, there can be a small performance impact.
1754 If in doubt, say N here.
1761 bool "Xen guest support on ARM"
1762 depends on ARM && AEABI && OF
1763 depends on CPU_V7 && !CPU_V6
1764 depends on !GENERIC_ATOMIC64
1766 select ARCH_DMA_ADDR_T_64BIT
1772 Say Y if you want to run Linux in a Virtual Machine on Xen on ARM.
1774 config STACKPROTECTOR_PER_TASK
1775 bool "Use a unique stack canary value for each task"
1776 depends on GCC_PLUGINS && STACKPROTECTOR && SMP && !XIP_DEFLATED_DATA
1777 select GCC_PLUGIN_ARM_SSP_PER_TASK
1780 Due to the fact that GCC uses an ordinary symbol reference from
1781 which to load the value of the stack canary, this value can only
1782 change at reboot time on SMP systems, and all tasks running in the
1783 kernel's address space are forced to use the same canary value for
1784 the entire duration that the system is up.
1786 Enable this option to switch to a different method that uses a
1787 different canary value for each task.
1794 bool "Flattened Device Tree support"
1798 Include support for flattened device tree machine descriptions.
1801 bool "Support for the traditional ATAGS boot data passing" if USE_OF
1804 This is the traditional way of passing data to the kernel at boot
1805 time. If you are solely relying on the flattened device tree (or
1806 the ARM_ATAG_DTB_COMPAT option) then you may unselect this option
1807 to remove ATAGS support from your kernel binary. If unsure,
1810 config DEPRECATED_PARAM_STRUCT
1811 bool "Provide old way to pass kernel parameters"
1814 This was deprecated in 2001 and announced to live on for 5 years.
1815 Some old boot loaders still use this way.
1817 # Compressed boot loader in ROM. Yes, we really want to ask about
1818 # TEXT and BSS so we preserve their values in the config files.
1819 config ZBOOT_ROM_TEXT
1820 hex "Compressed ROM boot loader base address"
1823 The physical address at which the ROM-able zImage is to be
1824 placed in the target. Platforms which normally make use of
1825 ROM-able zImage formats normally set this to a suitable
1826 value in their defconfig file.
1828 If ZBOOT_ROM is not enabled, this has no effect.
1830 config ZBOOT_ROM_BSS
1831 hex "Compressed ROM boot loader BSS address"
1834 The base address of an area of read/write memory in the target
1835 for the ROM-able zImage which must be available while the
1836 decompressor is running. It must be large enough to hold the
1837 entire decompressed kernel plus an additional 128 KiB.
1838 Platforms which normally make use of ROM-able zImage formats
1839 normally set this to a suitable value in their defconfig file.
1841 If ZBOOT_ROM is not enabled, this has no effect.
1844 bool "Compressed boot loader in ROM/flash"
1845 depends on ZBOOT_ROM_TEXT != ZBOOT_ROM_BSS
1846 depends on !ARM_APPENDED_DTB && !XIP_KERNEL && !AUTO_ZRELADDR
1848 Say Y here if you intend to execute your compressed kernel image
1849 (zImage) directly from ROM or flash. If unsure, say N.
1851 config ARM_APPENDED_DTB
1852 bool "Use appended device tree blob to zImage (EXPERIMENTAL)"
1855 With this option, the boot code will look for a device tree binary
1856 (DTB) appended to zImage
1857 (e.g. cat zImage <filename>.dtb > zImage_w_dtb).
1859 This is meant as a backward compatibility convenience for those
1860 systems with a bootloader that can't be upgraded to accommodate
1861 the documented boot protocol using a device tree.
1863 Beware that there is very little in terms of protection against
1864 this option being confused by leftover garbage in memory that might
1865 look like a DTB header after a reboot if no actual DTB is appended
1866 to zImage. Do not leave this option active in a production kernel
1867 if you don't intend to always append a DTB. Proper passing of the
1868 location into r2 of a bootloader provided DTB is always preferable
1871 config ARM_ATAG_DTB_COMPAT
1872 bool "Supplement the appended DTB with traditional ATAG information"
1873 depends on ARM_APPENDED_DTB
1875 Some old bootloaders can't be updated to a DTB capable one, yet
1876 they provide ATAGs with memory configuration, the ramdisk address,
1877 the kernel cmdline string, etc. Such information is dynamically
1878 provided by the bootloader and can't always be stored in a static
1879 DTB. To allow a device tree enabled kernel to be used with such
1880 bootloaders, this option allows zImage to extract the information
1881 from the ATAG list and store it at run time into the appended DTB.
1884 prompt "Kernel command line type" if ARM_ATAG_DTB_COMPAT
1885 default ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1887 config ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER
1888 bool "Use bootloader kernel arguments if available"
1890 Uses the command-line options passed by the boot loader instead of
1891 the device tree bootargs property. If the boot loader doesn't provide
1892 any, the device tree bootargs property will be used.
1894 config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND
1895 bool "Extend with bootloader kernel arguments"
1897 The command-line arguments provided by the boot loader will be
1898 appended to the the device tree bootargs property.
1903 string "Default kernel command string"
1906 On some architectures (EBSA110 and CATS), there is currently no way
1907 for the boot loader to pass arguments to the kernel. For these
1908 architectures, you should supply some command-line options at build
1909 time by entering them here. As a minimum, you should specify the
1910 memory size and the root device (e.g., mem=64M root=/dev/nfs).
1913 prompt "Kernel command line type" if CMDLINE != ""
1914 default CMDLINE_FROM_BOOTLOADER
1917 config CMDLINE_FROM_BOOTLOADER
1918 bool "Use bootloader kernel arguments if available"
1920 Uses the command-line options passed by the boot loader. If
1921 the boot loader doesn't provide any, the default kernel command
1922 string provided in CMDLINE will be used.
1924 config CMDLINE_EXTEND
1925 bool "Extend bootloader kernel arguments"
1927 The command-line arguments provided by the boot loader will be
1928 appended to the default kernel command string.
1930 config CMDLINE_FORCE
1931 bool "Always use the default kernel command string"
1933 Always use the default kernel command string, even if the boot
1934 loader passes other arguments to the kernel.
1935 This is useful if you cannot or don't want to change the
1936 command-line options your boot loader passes to the kernel.
1940 bool "Kernel Execute-In-Place from ROM"
1941 depends on !ARM_LPAE && !ARCH_MULTIPLATFORM
1943 Execute-In-Place allows the kernel to run from non-volatile storage
1944 directly addressable by the CPU, such as NOR flash. This saves RAM
1945 space since the text section of the kernel is not loaded from flash
1946 to RAM. Read-write sections, such as the data section and stack,
1947 are still copied to RAM. The XIP kernel is not compressed since
1948 it has to run directly from flash, so it will take more space to
1949 store it. The flash address used to link the kernel object files,
1950 and for storing it, is configuration dependent. Therefore, if you
1951 say Y here, you must know the proper physical address where to
1952 store the kernel image depending on your own flash memory usage.
1954 Also note that the make target becomes "make xipImage" rather than
1955 "make zImage" or "make Image". The final kernel binary to put in
1956 ROM memory will be arch/arm/boot/xipImage.
1960 config XIP_PHYS_ADDR
1961 hex "XIP Kernel Physical Location"
1962 depends on XIP_KERNEL
1963 default "0x00080000"
1965 This is the physical address in your flash memory the kernel will
1966 be linked for and stored to. This address is dependent on your
1969 config XIP_DEFLATED_DATA
1970 bool "Store kernel .data section compressed in ROM"
1971 depends on XIP_KERNEL
1974 Before the kernel is actually executed, its .data section has to be
1975 copied to RAM from ROM. This option allows for storing that data
1976 in compressed form and decompressed to RAM rather than merely being
1977 copied, saving some precious ROM space. A possible drawback is a
1978 slightly longer boot delay.
1981 bool "Kexec system call (EXPERIMENTAL)"
1982 depends on (!SMP || PM_SLEEP_SMP)
1986 kexec is a system call that implements the ability to shutdown your
1987 current kernel, and to start another kernel. It is like a reboot
1988 but it is independent of the system firmware. And like a reboot
1989 you can start any kernel with it, not just Linux.
1991 It is an ongoing process to be certain the hardware in a machine
1992 is properly shutdown, so do not be surprised if this code does not
1993 initially work for you.
1996 bool "Export atags in procfs"
1997 depends on ATAGS && KEXEC
2000 Should the atags used to boot the kernel be exported in an "atags"
2001 file in procfs. Useful with kexec.
2004 bool "Build kdump crash kernel (EXPERIMENTAL)"
2006 Generate crash dump after being started by kexec. This should
2007 be normally only set in special crash dump kernels which are
2008 loaded in the main kernel with kexec-tools into a specially
2009 reserved region and then later executed after a crash by
2010 kdump/kexec. The crash dump kernel must be compiled to a
2011 memory address not used by the main kernel
2013 For more details see Documentation/kdump/kdump.txt
2015 config AUTO_ZRELADDR
2016 bool "Auto calculation of the decompressed kernel image address"
2018 ZRELADDR is the physical address where the decompressed kernel
2019 image will be placed. If AUTO_ZRELADDR is selected, the address
2020 will be determined at run-time by masking the current IP with
2021 0xf8000000. This assumes the zImage being placed in the first 128MB
2022 from start of memory.
2028 bool "UEFI runtime support"
2029 depends on OF && !CPU_BIG_ENDIAN && MMU && AUTO_ZRELADDR && !XIP_KERNEL
2031 select EFI_PARAMS_FROM_FDT
2034 select EFI_RUNTIME_WRAPPERS
2036 This option provides support for runtime services provided
2037 by UEFI firmware (such as non-volatile variables, realtime
2038 clock, and platform reset). A UEFI stub is also provided to
2039 allow the kernel to be booted as an EFI application. This
2040 is only useful for kernels that may run on systems that have
2044 bool "Enable support for SMBIOS (DMI) tables"
2048 This enables SMBIOS/DMI feature for systems.
2050 This option is only useful on systems that have UEFI firmware.
2051 However, even with this option, the resultant kernel should
2052 continue to boot on existing non-UEFI platforms.
2054 NOTE: This does *NOT* enable or encourage the use of DMI quirks,
2055 i.e., the the practice of identifying the platform via DMI to
2056 decide whether certain workarounds for buggy hardware and/or
2057 firmware need to be enabled. This would require the DMI subsystem
2058 to be enabled much earlier than we do on ARM, which is non-trivial.
2062 menu "CPU Power Management"
2064 source "drivers/cpufreq/Kconfig"
2066 source "drivers/cpuidle/Kconfig"
2070 menu "Floating point emulation"
2072 comment "At least one emulation must be selected"
2075 bool "NWFPE math emulation"
2076 depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
2078 Say Y to include the NWFPE floating point emulator in the kernel.
2079 This is necessary to run most binaries. Linux does not currently
2080 support floating point hardware so you need to say Y here even if
2081 your machine has an FPA or floating point co-processor podule.
2083 You may say N here if you are going to load the Acorn FPEmulator
2084 early in the bootup.
2087 bool "Support extended precision"
2088 depends on FPE_NWFPE
2090 Say Y to include 80-bit support in the kernel floating-point
2091 emulator. Otherwise, only 32 and 64-bit support is compiled in.
2092 Note that gcc does not generate 80-bit operations by default,
2093 so in most cases this option only enlarges the size of the
2094 floating point emulator without any good reason.
2096 You almost surely want to say N here.
2099 bool "FastFPE math emulation (EXPERIMENTAL)"
2100 depends on (!AEABI || OABI_COMPAT) && !CPU_32v3
2102 Say Y here to include the FAST floating point emulator in the kernel.
2103 This is an experimental much faster emulator which now also has full
2104 precision for the mantissa. It does not support any exceptions.
2105 It is very simple, and approximately 3-6 times faster than NWFPE.
2107 It should be sufficient for most programs. It may be not suitable
2108 for scientific calculations, but you have to check this for yourself.
2109 If you do not feel you need a faster FP emulation you should better
2113 bool "VFP-format floating point maths"
2114 depends on CPU_V6 || CPU_V6K || CPU_ARM926T || CPU_V7 || CPU_FEROCEON
2116 Say Y to include VFP support code in the kernel. This is needed
2117 if your hardware includes a VFP unit.
2119 Please see <file:Documentation/arm/VFP/release-notes.txt> for
2120 release notes and additional status information.
2122 Say N if your target does not have VFP hardware.
2130 bool "Advanced SIMD (NEON) Extension support"
2131 depends on VFPv3 && CPU_V7
2133 Say Y to include support code for NEON, the ARMv7 Advanced SIMD
2136 config KERNEL_MODE_NEON
2137 bool "Support for NEON in kernel mode"
2138 depends on NEON && AEABI
2140 Say Y to include support for NEON in kernel mode.
2144 menu "Power management options"
2146 source "kernel/power/Kconfig"
2148 config ARCH_SUSPEND_POSSIBLE
2149 depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \
2150 CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK
2153 config ARM_CPU_SUSPEND
2154 def_bool PM_SLEEP || BL_SWITCHER || ARM_PSCI_FW
2155 depends on ARCH_SUSPEND_POSSIBLE
2157 config ARCH_HIBERNATION_POSSIBLE
2160 default y if ARCH_SUSPEND_POSSIBLE
2164 source "drivers/firmware/Kconfig"
2167 source "arch/arm/crypto/Kconfig"
2170 source "arch/arm/kvm/Kconfig"