2 * This program is free software; you can redistribute it and/or modify
3 * it under the terms of the GNU General Public License version 2 as
4 * published by the Free Software Foundation.
9 #include <dt-bindings/interrupt-controller/irq.h>
13 compatible = "ti,dm8168-evm", "ti,dm8168";
16 device_type = "memory";
17 reg = <0x80000000 0x40000000 /* 1 GB */
18 0xc0000000 0x40000000>; /* 1 GB */
21 /* FDC6331L controlled by SD_POW pin */
22 vmmcsd_fixed: fixedregulator0 {
23 compatible = "regulator-fixed";
24 regulator-name = "vmmcsd_fixed";
25 regulator-min-microvolt = <3300000>;
26 regulator-max-microvolt = <3300000>;
29 sata_refclk: fixedclock0 {
30 compatible = "fixed-clock";
32 clock-frequency = <100000000>;
37 mcspi1_pins: pinmux_mcspi1_pins {
38 pinctrl-single,pins = <
39 DM816X_IOPAD(0x0a94, MUX_MODE0) /* SPI_SCLK */
40 DM816X_IOPAD(0x0a98, MUX_MODE0) /* SPI_SCS0 */
41 DM816X_IOPAD(0x0aa8, MUX_MODE0) /* SPI_D0 */
42 DM816X_IOPAD(0x0aac, MUX_MODE0) /* SPI_D1 */
46 mmc_pins: pinmux_mmc_pins {
47 pinctrl-single,pins = <
48 DM816X_IOPAD(0x0a70, MUX_MODE0) /* SD_POW */
49 DM816X_IOPAD(0x0a74, MUX_MODE0) /* SD_CLK */
50 DM816X_IOPAD(0x0a78, MUX_MODE0) /* SD_CMD */
51 DM816X_IOPAD(0x0a7C, MUX_MODE0) /* SD_DAT0 */
52 DM816X_IOPAD(0x0a80, MUX_MODE0) /* SD_DAT1 */
53 DM816X_IOPAD(0x0a84, MUX_MODE0) /* SD_DAT2 */
54 DM816X_IOPAD(0x0a88, MUX_MODE0) /* SD_DAT2 */
55 DM816X_IOPAD(0x0a8c, MUX_MODE2) /* GP1[7] */
56 DM816X_IOPAD(0x0a90, MUX_MODE2) /* GP1[8] */
60 usb0_pins: pinmux_usb0_pins {
61 pinctrl-single,pins = <
62 DM816X_IOPAD(0x0d04, MUX_MODE0) /* USB0_DRVVBUS */
66 usb1_pins: pinmux_usb1_pins {
67 pinctrl-single,pins = <
68 DM816X_IOPAD(0x0d08, MUX_MODE0) /* USB1_DRVVBUS */
74 extgpio0: pcf8575@20 {
75 compatible = "nxp,pcf8575";
83 extgpio1: pcf8575@20 {
84 compatible = "nxp,pcf8575";
92 ranges = <0 0 0x04000000 0x01000000>; /* CS0: 16MB for NAND */
95 compatible = "ti,omap2-nand";
96 linux,mtd-name= "micron,mt29f2g16aadwp";
97 reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
98 interrupt-parent = <&gpmc>;
99 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
100 <1 IRQ_TYPE_NONE>; /* termcount */
101 #address-cells = <1>;
103 ti,nand-ecc-opt = "bch8";
104 nand-bus-width = <16>;
105 gpmc,device-width = <2>;
106 gpmc,sync-clk-ps = <0>;
108 gpmc,cs-rd-off-ns = <44>;
109 gpmc,cs-wr-off-ns = <44>;
110 gpmc,adv-on-ns = <6>;
111 gpmc,adv-rd-off-ns = <34>;
112 gpmc,adv-wr-off-ns = <44>;
114 gpmc,we-off-ns = <40>;
116 gpmc,oe-off-ns = <54>;
117 gpmc,access-ns = <64>;
118 gpmc,rd-cycle-ns = <82>;
119 gpmc,wr-cycle-ns = <82>;
120 gpmc,bus-turnaround-ns = <0>;
121 gpmc,cycle2cycle-delay-ns = <0>;
122 gpmc,clk-activation-ns = <0>;
123 gpmc,wr-access-ns = <40>;
124 gpmc,wr-data-mux-bus-ns = <0>;
131 reg = <0x80000 0x1c0000>;
134 label = "Environment";
135 reg = <0x240000 0x40000>;
139 reg = <0x280000 0x500000>;
142 label = "Filesystem";
143 reg = <0x780000 0xf880000>;
149 pinctrl-names = "default";
150 pinctrl-0 = <&mcspi1_pins>;
153 compatible = "w25x32";
154 spi-max-frequency = <48000000>;
156 #address-cells = <1>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&mmc_pins>;
164 vmmc-supply = <&vmmcsd_fixed>;
166 cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
167 wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
170 /* At least dm8168-evm rev c won't support multipoint, later may */
172 pinctrl-names = "default";
173 pinctrl-0 = <&usb0_pins>;
174 mentor,multipoint = <0>;
178 pinctrl-names = "default";
179 pinctrl-0 = <&usb1_pins>;
180 mentor,multipoint = <0>;
184 clocks = <&sysclk5_ck>, <&sata_refclk>;