2 * Google Peach Pit Rev 6+ board device tree source
4 * Copyright (c) 2014 Google, Inc
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/gpio/gpio.h>
14 #include <dt-bindings/interrupt-controller/irq.h>
15 #include <dt-bindings/clock/maxim,max77802.h>
16 #include <dt-bindings/regulator/maxim,max77802.h>
17 #include "exynos5420.dtsi"
18 #include "exynos5420-cpus.dtsi"
21 model = "Google Peach Pit Rev 6+";
23 compatible = "google,pit-rev16",
24 "google,pit-rev15", "google,pit-rev14",
25 "google,pit-rev13", "google,pit-rev12",
26 "google,pit-rev11", "google,pit-rev10",
27 "google,pit-rev9", "google,pit-rev8",
28 "google,pit-rev7", "google,pit-rev6",
29 "google,pit", "google,peach","samsung,exynos5420",
33 /* Assign 20 so we don't get confused w/ builtin ones */
34 i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
37 backlight: backlight {
38 compatible = "pwm-backlight";
39 pwms = <&pwm 0 1000000 0>;
40 brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
41 default-brightness-level = <7>;
42 power-supply = <&tps65090_fet1>;
43 pinctrl-0 = <&pwm0_out>;
44 pinctrl-names = "default";
48 stdout-path = "serial3:115200n8";
53 compatible = "samsung,exynos5420-oscclk";
54 clock-frequency = <24000000>;
59 compatible = "gpio-keys";
61 pinctrl-names = "default";
62 pinctrl-0 = <&power_key_irq &lid_irq>;
66 gpios = <&gpx1 2 GPIO_ACTIVE_LOW>;
67 linux,code = <KEY_POWER>;
73 gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
74 linux,input-type = <5>; /* EV_SW */
75 linux,code = <0>; /* SW_LID */
76 debounce-interval = <1>;
82 reg = <0x20000000 0x80000000>;
86 compatible = "google,snow-audio-max98090";
88 samsung,model = "Peach-Pit-I2S-MAX98090";
89 samsung,i2s-controller = <&i2s0>;
90 samsung,audio-codec = <&max98090>;
93 usb300_vbus_reg: regulator-usb300 {
94 compatible = "regulator-fixed";
95 regulator-name = "P5.0V_USB3CON0";
96 regulator-min-microvolt = <5000000>;
97 regulator-max-microvolt = <5000000>;
98 gpio = <&gph0 0 GPIO_ACTIVE_HIGH>;
99 pinctrl-names = "default";
100 pinctrl-0 = <&usb300_vbus_en>;
104 usb301_vbus_reg: regulator-usb301 {
105 compatible = "regulator-fixed";
106 regulator-name = "P5.0V_USB3CON1";
107 regulator-min-microvolt = <5000000>;
108 regulator-max-microvolt = <5000000>;
109 gpio = <&gph0 1 GPIO_ACTIVE_HIGH>;
110 pinctrl-names = "default";
111 pinctrl-0 = <&usb301_vbus_en>;
115 vbat: fixed-regulator {
116 compatible = "regulator-fixed";
117 regulator-name = "vbat-supply";
123 compatible = "auo,b116xw03";
124 power-supply = <&tps65090_fet6>;
125 backlight = <&backlight>;
129 remote-endpoint = <&bridge_out>;
134 mmc1_pwrseq: mmc1_pwrseq {
135 compatible = "mmc-pwrseq-simple";
136 reset-gpios = <&gpx0 0 GPIO_ACTIVE_LOW>; /* WIFI_EN */
137 clocks = <&max77802 MAX77802_CLK_32K_CP>;
138 clock-names = "ext_clock";
144 vdd-supply = <&ldo9_reg>;
148 cpu-supply = <&buck2_reg>;
152 cpu-supply = <&buck6_reg>;
157 pinctrl-names = "default";
158 pinctrl-0 = <&dp_hpd_gpio>;
159 samsung,color-space = <0>;
160 samsung,color-depth = <1>;
161 samsung,link-rate = <0x06>;
162 samsung,lane-count = <2>;
163 hpd-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
168 remote-endpoint = <&bridge_in>;
181 hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
182 pinctrl-names = "default";
183 pinctrl-0 = <&hdmi_hpd_irq>;
186 hdmi-en-supply = <&tps65090_fet7>;
187 vdd-supply = <&ldo8_reg>;
188 vdd_osc-supply = <&ldo10_reg>;
189 vdd_pll-supply = <&ldo8_reg>;
194 clock-frequency = <400000>;
196 max77802: max77802-pmic@9 {
197 compatible = "maxim,max77802";
198 interrupt-parent = <&gpx3>;
199 interrupts = <1 IRQ_TYPE_NONE>;
200 pinctrl-names = "default";
201 pinctrl-0 = <&max77802_irq>, <&pmic_selb>,
202 <&pmic_dvs_1>, <&pmic_dvs_2>, <&pmic_dvs_3>;
207 inb1-supply = <&tps65090_dcdc2>;
208 inb2-supply = <&tps65090_dcdc1>;
209 inb3-supply = <&tps65090_dcdc2>;
210 inb4-supply = <&tps65090_dcdc2>;
211 inb5-supply = <&tps65090_dcdc1>;
212 inb6-supply = <&tps65090_dcdc2>;
213 inb7-supply = <&tps65090_dcdc1>;
214 inb8-supply = <&tps65090_dcdc1>;
215 inb9-supply = <&tps65090_dcdc1>;
216 inb10-supply = <&tps65090_dcdc1>;
218 inl1-supply = <&buck5_reg>;
219 inl2-supply = <&buck7_reg>;
220 inl3-supply = <&buck9_reg>;
221 inl4-supply = <&buck9_reg>;
222 inl5-supply = <&buck9_reg>;
223 inl6-supply = <&tps65090_dcdc2>;
224 inl7-supply = <&buck9_reg>;
225 inl9-supply = <&tps65090_dcdc2>;
226 inl10-supply = <&buck7_reg>;
230 regulator-name = "vdd_mif";
231 regulator-min-microvolt = <800000>;
232 regulator-max-microvolt = <1300000>;
235 regulator-ramp-delay = <12500>;
236 regulator-state-mem {
237 regulator-off-in-suspend;
242 regulator-name = "vdd_arm";
243 regulator-min-microvolt = <800000>;
244 regulator-max-microvolt = <1500000>;
247 regulator-ramp-delay = <12500>;
248 regulator-state-mem {
249 regulator-off-in-suspend;
254 regulator-name = "vdd_int";
255 regulator-min-microvolt = <800000>;
256 regulator-max-microvolt = <1400000>;
259 regulator-ramp-delay = <12500>;
260 regulator-state-mem {
261 regulator-off-in-suspend;
266 regulator-name = "vdd_g3d";
267 regulator-min-microvolt = <700000>;
268 regulator-max-microvolt = <1400000>;
271 regulator-ramp-delay = <12500>;
272 regulator-state-mem {
273 regulator-off-in-suspend;
278 regulator-name = "vdd_1v2";
279 regulator-min-microvolt = <1200000>;
280 regulator-max-microvolt = <1200000>;
283 regulator-state-mem {
284 regulator-off-in-suspend;
289 regulator-name = "vdd_kfc";
290 regulator-min-microvolt = <800000>;
291 regulator-max-microvolt = <1500000>;
294 regulator-ramp-delay = <12500>;
295 regulator-state-mem {
296 regulator-off-in-suspend;
301 regulator-name = "vdd_1v35";
302 regulator-min-microvolt = <1350000>;
303 regulator-max-microvolt = <1350000>;
306 regulator-state-mem {
307 regulator-on-in-suspend;
312 regulator-name = "vdd_emmc";
313 regulator-min-microvolt = <2850000>;
314 regulator-max-microvolt = <2850000>;
317 regulator-state-mem {
318 regulator-off-in-suspend;
323 regulator-name = "vdd_2v";
324 regulator-min-microvolt = <2000000>;
325 regulator-max-microvolt = <2000000>;
328 regulator-state-mem {
329 regulator-on-in-suspend;
334 regulator-name = "vdd_1v8";
335 regulator-min-microvolt = <1800000>;
336 regulator-max-microvolt = <1800000>;
339 regulator-state-mem {
340 regulator-on-in-suspend;
345 regulator-name = "vdd_1v0";
346 regulator-min-microvolt = <1000000>;
347 regulator-max-microvolt = <1000000>;
349 regulator-state-mem {
350 regulator-on-in-suspend;
351 regulator-mode = <MAX77802_OPMODE_LP>;
356 regulator-name = "vdd_1v2_2";
357 regulator-min-microvolt = <1200000>;
358 regulator-max-microvolt = <1200000>;
362 regulator-name = "vdd_1v8_3";
363 regulator-min-microvolt = <1800000>;
364 regulator-max-microvolt = <1800000>;
366 regulator-state-mem {
367 regulator-on-in-suspend;
368 regulator-mode = <MAX77802_OPMODE_LP>;
372 vqmmc_sdcard: ldo4_reg: LDO4 {
373 regulator-name = "vdd_sd";
374 regulator-min-microvolt = <1800000>;
375 regulator-max-microvolt = <2800000>;
377 regulator-state-mem {
378 regulator-off-in-suspend;
383 regulator-name = "vdd_1v8_5";
384 regulator-min-microvolt = <1800000>;
385 regulator-max-microvolt = <1800000>;
387 regulator-state-mem {
388 regulator-off-in-suspend;
393 regulator-name = "vdd_1v8_6";
394 regulator-min-microvolt = <1800000>;
395 regulator-max-microvolt = <1800000>;
397 regulator-state-mem {
398 regulator-off-in-suspend;
403 regulator-name = "vdd_1v8_7";
404 regulator-min-microvolt = <1800000>;
405 regulator-max-microvolt = <1800000>;
409 regulator-name = "vdd_ldo8";
410 regulator-min-microvolt = <1000000>;
411 regulator-max-microvolt = <1000000>;
413 regulator-state-mem {
414 regulator-off-in-suspend;
419 regulator-name = "vdd_ldo9";
420 regulator-min-microvolt = <1800000>;
421 regulator-max-microvolt = <1800000>;
423 regulator-state-mem {
424 regulator-on-in-suspend;
425 regulator-mode = <MAX77802_OPMODE_LP>;
430 regulator-name = "vdd_ldo10";
431 regulator-min-microvolt = <1800000>;
432 regulator-max-microvolt = <1800000>;
434 regulator-state-mem {
435 regulator-off-in-suspend;
440 regulator-name = "vdd_ldo11";
441 regulator-min-microvolt = <1800000>;
442 regulator-max-microvolt = <1800000>;
444 regulator-state-mem {
445 regulator-on-in-suspend;
446 regulator-mode = <MAX77802_OPMODE_LP>;
451 regulator-name = "vdd_ldo12";
452 regulator-min-microvolt = <3000000>;
453 regulator-max-microvolt = <3000000>;
455 regulator-state-mem {
456 regulator-off-in-suspend;
461 regulator-name = "vdd_ldo13";
462 regulator-min-microvolt = <1800000>;
463 regulator-max-microvolt = <1800000>;
465 regulator-state-mem {
466 regulator-on-in-suspend;
467 regulator-mode = <MAX77802_OPMODE_LP>;
472 regulator-name = "vdd_ldo14";
473 regulator-min-microvolt = <1800000>;
474 regulator-max-microvolt = <1800000>;
476 regulator-state-mem {
477 regulator-off-in-suspend;
482 regulator-name = "vdd_ldo15";
483 regulator-min-microvolt = <1000000>;
484 regulator-max-microvolt = <1000000>;
486 regulator-state-mem {
487 regulator-off-in-suspend;
492 regulator-name = "vdd_g3ds";
493 regulator-min-microvolt = <900000>;
494 regulator-max-microvolt = <1400000>;
496 regulator-state-mem {
497 regulator-off-in-suspend;
502 regulator-name = "ldo_18";
503 regulator-min-microvolt = <1800000>;
504 regulator-max-microvolt = <1800000>;
508 regulator-name = "ldo_19";
509 regulator-min-microvolt = <1800000>;
510 regulator-max-microvolt = <1800000>;
514 regulator-name = "ldo_20";
515 regulator-min-microvolt = <1800000>;
516 regulator-max-microvolt = <1800000>;
521 regulator-name = "ldo_21";
522 regulator-min-microvolt = <2800000>;
523 regulator-max-microvolt = <2800000>;
527 regulator-name = "ldo_23";
528 regulator-min-microvolt = <3300000>;
529 regulator-max-microvolt = <3300000>;
532 regulator-name = "ldo_24";
533 regulator-min-microvolt = <2800000>;
534 regulator-max-microvolt = <2800000>;
538 regulator-name = "ldo_25";
539 regulator-min-microvolt = <3300000>;
540 regulator-max-microvolt = <3300000>;
544 regulator-name = "ldo_26";
545 regulator-min-microvolt = <1200000>;
546 regulator-max-microvolt = <1200000>;
550 regulator-name = "ldo_27";
551 regulator-min-microvolt = <1200000>;
552 regulator-max-microvolt = <1200000>;
556 regulator-name = "ldo_28";
557 regulator-min-microvolt = <1800000>;
558 regulator-max-microvolt = <1800000>;
562 regulator-name = "ldo_29";
563 regulator-min-microvolt = <1800000>;
564 regulator-max-microvolt = <1800000>;
568 regulator-name = "vdd_mifs";
569 regulator-min-microvolt = <1000000>;
570 regulator-max-microvolt = <1000000>;
572 regulator-state-mem {
573 regulator-off-in-suspend;
578 regulator-name = "ldo_32";
579 regulator-min-microvolt = <3000000>;
580 regulator-max-microvolt = <3000000>;
584 regulator-name = "ldo_33";
585 regulator-min-microvolt = <2800000>;
586 regulator-max-microvolt = <2800000>;
590 regulator-name = "ldo_34";
591 regulator-min-microvolt = <3000000>;
592 regulator-max-microvolt = <3000000>;
596 regulator-name = "ldo_35";
597 regulator-min-microvolt = <1200000>;
598 regulator-max-microvolt = <1200000>;
606 clock-frequency = <400000>;
609 compatible = "maxim,max98090";
612 interrupt-parent = <&gpx0>;
613 pinctrl-names = "default";
614 pinctrl-0 = <&max98090_irq>;
615 clocks = <&pmu_system_controller 0>;
616 clock-names = "mclk";
620 compatible = "isil,isl29018";
622 vcc-supply = <&tps65090_fet5>;
625 ps8625: lvds-bridge@48 {
626 compatible = "parade,ps8625";
628 sleep-gpios = <&gpx3 5 GPIO_ACTIVE_HIGH>;
629 reset-gpios = <&gpy7 7 GPIO_ACTIVE_HIGH>;
634 #address-cells = <1>;
640 bridge_out: endpoint {
641 remote-endpoint = <&panel_in>;
648 bridge_in: endpoint {
649 remote-endpoint = <&dp_out>;
659 clock-frequency = <333000>;
663 compatible = "atmel,maxtouch";
665 interrupt-parent = <&gpx1>;
666 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
668 pinctrl-names = "default";
669 pinctrl-0 = <&trackpad_irq>;
670 linux,gpio-keymap = <KEY_RESERVED
672 KEY_RESERVED /* GPIO0 */
673 KEY_RESERVED /* GPIO1 */
674 KEY_RESERVED /* GPIO2 */
675 BTN_LEFT>; /* GPIO3 */
681 clock-frequency = <400000>;
684 compatible = "infineon,slb9645tt";
687 /* Unused irq; but still need to configure the pins */
688 pinctrl-names = "default";
689 pinctrl-0 = <&tpm_irq>;
695 samsung,i2c-sda-delay = <100>;
696 samsung,i2c-max-bus-freq = <66000>;
697 samsung,i2c-slave-addr = <0x50>;
705 samsung,mfc-r = <0x43000000 0x800000>;
706 samsung,mfc-l = <0x51000000 0x800000>;
715 clock-frequency = <400000000>;
716 samsung,dw-mshc-ciu-div = <3>;
717 samsung,dw-mshc-sdr-timing = <0 4>;
718 samsung,dw-mshc-ddr-timing = <0 2>;
719 samsung,dw-mshc-hs400-timing = <0 2>;
720 samsung,read-strobe-delay = <90>;
721 pinctrl-names = "default";
722 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8 &sd0_rclk>;
731 keep-power-in-suspend;
732 clock-frequency = <400000000>;
733 samsung,dw-mshc-ciu-div = <1>;
734 samsung,dw-mshc-sdr-timing = <0 1>;
735 samsung,dw-mshc-ddr-timing = <0 2>;
736 pinctrl-names = "default";
737 pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_int>, <&sd1_bus1>,
738 <&sd1_bus4>, <&sd1_bus8>, <&wifi_en>;
741 mmc-pwrseq = <&mmc1_pwrseq>;
742 vqmmc-supply = <&buck10_reg>;
749 card-detect-delay = <200>;
750 clock-frequency = <400000000>;
751 samsung,dw-mshc-ciu-div = <3>;
752 samsung,dw-mshc-sdr-timing = <2 3>;
753 samsung,dw-mshc-ddr-timing = <1 2>;
754 pinctrl-names = "default";
755 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>;
761 pinctrl-names = "default";
762 pinctrl-0 = <&mask_tpm_reset>;
765 samsung,pins = "gpx0-0";
766 samsung,pin-function = <1>;
767 samsung,pin-pud = <0>;
768 samsung,pin-drv = <0>;
771 max98090_irq: max98090-irq {
772 samsung,pins = "gpx0-2";
773 samsung,pin-function = <0>;
774 samsung,pin-pud = <0>;
775 samsung,pin-drv = <0>;
778 /* We need GPX0_6 to be low at sleep time; just keep it low always */
779 mask_tpm_reset: mask-tpm-reset {
780 samsung,pins = "gpx0-6";
781 samsung,pin-function = <1>;
782 samsung,pin-pud = <0>;
783 samsung,pin-drv = <0>;
784 samsung,pin-val = <0>;
788 samsung,pins = "gpx1-0";
789 samsung,pin-function = <0>;
790 samsung,pin-pud = <0>;
791 samsung,pin-drv = <0>;
794 trackpad_irq: trackpad-irq {
795 samsung,pins = "gpx1-1";
796 samsung,pin-function = <0xf>;
797 samsung,pin-pud = <0>;
798 samsung,pin-drv = <0>;
801 power_key_irq: power-key-irq {
802 samsung,pins = "gpx1-2";
803 samsung,pin-function = <0>;
804 samsung,pin-pud = <0>;
805 samsung,pin-drv = <0>;
809 samsung,pins = "gpx1-5";
810 samsung,pin-function = <0>;
811 samsung,pin-pud = <0>;
812 samsung,pin-drv = <0>;
815 tps65090_irq: tps65090-irq {
816 samsung,pins = "gpx2-5";
817 samsung,pin-function = <0>;
818 samsung,pin-pud = <0>;
819 samsung,pin-drv = <0>;
822 dp_hpd_gpio: dp_hpd_gpio {
823 samsung,pins = "gpx2-6";
824 samsung,pin-function = <0>;
825 samsung,pin-pud = <3>;
826 samsung,pin-drv = <0>;
829 max77802_irq: max77802-irq {
830 samsung,pins = "gpx3-1";
831 samsung,pin-function = <0>;
832 samsung,pin-pud = <0>;
833 samsung,pin-drv = <0>;
837 samsung,pins = "gpx3-4";
838 samsung,pin-function = <0xf>;
839 samsung,pin-pud = <0>;
840 samsung,pin-drv = <0>;
843 hdmi_hpd_irq: hdmi-hpd-irq {
844 samsung,pins = "gpx3-7";
845 samsung,pin-function = <0>;
846 samsung,pin-pud = <1>;
847 samsung,pin-drv = <0>;
850 pmic_dvs_1: pmic-dvs-1 {
851 samsung,pins = "gpy7-6";
852 samsung,pin-function = <1>;
853 samsung,pin-pud = <0>;
854 samsung,pin-drv = <0>;
859 /* Adjust WiFi drive strengths lower for EMI */
861 samsung,pin-drv = <2>;
865 samsung,pin-drv = <2>;
868 sd1_bus1: sd1-bus-width1 {
869 samsung,pin-drv = <2>;
872 sd1_bus4: sd1-bus-width4 {
873 samsung,pin-drv = <2>;
876 sd1_bus8: sd1-bus-width8 {
877 samsung,pin-drv = <2>;
882 pmic_dvs_2: pmic-dvs-2 {
883 samsung,pins = "gpj4-2";
884 samsung,pin-function = <1>;
885 samsung,pin-pud = <0>;
886 samsung,pin-drv = <0>;
889 pmic_dvs_3: pmic-dvs-3 {
890 samsung,pins = "gpj4-3";
891 samsung,pin-function = <1>;
892 samsung,pin-pud = <0>;
893 samsung,pin-drv = <0>;
898 /* Drive SPI lines at x2 for better integrity */
900 samsung,pin-drv = <2>;
903 /* Drive SPI chip select at x2 for better integrity */
904 ec_spi_cs: ec-spi-cs {
905 samsung,pins = "gpb1-2";
906 samsung,pin-function = <1>;
907 samsung,pin-pud = <0>;
908 samsung,pin-drv = <2>;
911 usb300_vbus_en: usb300-vbus-en {
912 samsung,pins = "gph0-0";
913 samsung,pin-function = <1>;
914 samsung,pin-pud = <0>;
915 samsung,pin-drv = <0>;
918 usb301_vbus_en: usb301-vbus-en {
919 samsung,pins = "gph0-1";
920 samsung,pin-function = <1>;
921 samsung,pin-pud = <0>;
922 samsung,pin-drv = <0>;
925 pmic_selb: pmic-selb {
926 samsung,pins = "gph0-2", "gph0-3", "gph0-4", "gph0-5",
928 samsung,pin-function = <1>;
929 samsung,pin-pud = <0>;
930 samsung,pin-drv = <0>;
934 &pmu_system_controller {
935 assigned-clocks = <&pmu_system_controller 0>;
936 assigned-clock-parents = <&clock CLK_FIN_PLL>;
941 clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
942 clock-names = "rtc", "rtc_src";
948 samsung,spi-src-clk = <0>;
949 cs-gpios = <&gpb1 2 GPIO_ACTIVE_HIGH>;
952 compatible = "google,cros-ec-spi";
953 interrupt-parent = <&gpx1>;
955 pinctrl-names = "default";
956 pinctrl-0 = <&ec_spi_cs &ec_irq>;
958 spi-max-frequency = <3125000>;
959 google,has-vbc-nvram;
962 samsung,spi-feedback-delay = <1>;
966 compatible = "google,cros-ec-i2c-tunnel";
967 #address-cells = <1>;
969 google,remote-bus = <0>;
971 battery: sbs-battery@b {
972 compatible = "sbs,sbs-battery";
974 sbs,poll-retry-count = <1>;
975 sbs,i2c-retry-count = <2>;
979 compatible = "ti,tps65090";
983 * Config irq to disable internal pulls
984 * even though we run in polling mode.
986 pinctrl-names = "default";
987 pinctrl-0 = <&tps65090_irq>;
989 vsys1-supply = <&vbat>;
990 vsys2-supply = <&vbat>;
991 vsys3-supply = <&vbat>;
992 infet1-supply = <&vbat>;
993 infet2-supply = <&tps65090_dcdc1>;
994 infet3-supply = <&tps65090_dcdc2>;
995 infet4-supply = <&tps65090_dcdc2>;
996 infet5-supply = <&tps65090_dcdc2>;
997 infet6-supply = <&tps65090_dcdc2>;
998 infet7-supply = <&tps65090_dcdc1>;
999 vsys-l1-supply = <&vbat>;
1000 vsys-l2-supply = <&vbat>;
1003 tps65090_dcdc1: dcdc1 {
1004 ti,enable-ext-control;
1006 tps65090_dcdc2: dcdc2 {
1007 ti,enable-ext-control;
1009 tps65090_dcdc3: dcdc3 {
1010 ti,enable-ext-control;
1012 tps65090_fet1: fet1 {
1013 regulator-name = "vcd_led";
1015 tps65090_fet2: fet2 {
1016 regulator-name = "video_mid";
1017 regulator-always-on;
1019 tps65090_fet3: fet3 {
1020 regulator-name = "wwan_r";
1021 regulator-always-on;
1023 tps65090_fet4: fet4 {
1024 regulator-name = "sdcard";
1025 regulator-always-on;
1027 tps65090_fet5: fet5 {
1028 regulator-name = "camout";
1029 regulator-always-on;
1031 tps65090_fet6: fet6 {
1032 regulator-name = "lcd_vdd";
1034 tps65090_fet7: fet7 {
1035 regulator-name = "video_mid_1a";
1036 regulator-always-on;
1038 tps65090_ldo1: ldo1 {
1040 tps65090_ldo2: ldo2 {
1045 compatible = "ti,tps65090-charger";
1065 vbus-supply = <&usb300_vbus_reg>;
1069 vbus-supply = <&usb301_vbus_reg>;
1073 * Use longest HW watchdog in SoC (32 seconds) since the hardware
1074 * watchdog provides no debugging information (compared to soft/hard
1075 * lockup detectors) and so should be last resort.
1081 #include "cros-ec-keyboard.dtsi"
1082 #include "cros-adc-thermistors.dtsi"