arch/arm/boot/dts/imx35.dtsi

   1 /*
   2  * Copyright 2012 Steffen Trumtrar, Pengutronix
   3  *
   4  * based on imx27.dtsi
   5  *
   6  * This program is free software; you can redistribute it and/or modify it under
   7  * the terms of the GNU General Public License version 2 as published by the
   8  * Free Software Foundation.
   9  */
  10
  11 #include "imx35-pinfunc.h"
  12
  13 / {
  14         #address-cells = <1>;
  15         #size-cells = <1>;
  16
  17         aliases {
  18                 ethernet0 = &fec;
  19                 gpio0 = &gpio1;
  20                 gpio1 = &gpio2;
  21                 gpio2 = &gpio3;
  22                 serial0 = &uart1;
  23                 serial1 = &uart2;
  24                 serial2 = &uart3;
  25                 spi0 = &spi1;
  26                 spi1 = &spi2;
  27         };
  28
  29         cpus {
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32
  33                 cpu@0 {
  34                         compatible = "arm,arm1136jf-s";
  35                         device_type = "cpu";
  36                         reg = <0>;
  37                 };
  38         };
  39
  40         avic: avic-interrupt-controller@68000000 {
  41                 compatible = "fsl,imx35-avic", "fsl,avic";
  42                 interrupt-controller;
  43                 #interrupt-cells = <1>;
  44                 reg = <0x68000000 0x10000000>;
  45         };
  46
  47         soc {
  48                 #address-cells = <1>;
  49                 #size-cells = <1>;
  50                 compatible = "simple-bus";
  51                 interrupt-parent = <&avic>;
  52                 ranges;
  53
  54                 L2: l2-cache@30000000 {
  55                         compatible = "arm,l210-cache";
  56                         reg = <0x30000000 0x1000>;
  57                         cache-unified;
  58                         cache-level = <2>;
  59                 };
  60
  61                 aips1: aips@43f00000 {
  62                         compatible = "fsl,aips", "simple-bus";
  63                         #address-cells = <1>;
  64                         #size-cells = <1>;
  65                         reg = <0x43f00000 0x100000>;
  66                         ranges;
  67
  68                         i2c1: i2c@43f80000 {
  69                                 #address-cells = <1>;
  70                                 #size-cells = <0>;
  71                                 compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
  72                                 reg = <0x43f80000 0x4000>;
  73                                 clocks = <&clks 51>;
  74                                 clock-names = "ipg_per";
  75                                 interrupts = <10>;
  76                                 status = "disabled";
  77                         };
  78
  79                         i2c3: i2c@43f84000 {
  80                                 #address-cells = <1>;
  81                                 #size-cells = <0>;
  82                                 compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
  83                                 reg = <0x43f84000 0x4000>;
  84                                 clocks = <&clks 53>;
  85                                 clock-names = "ipg_per";
  86                                 interrupts = <3>;
  87                                 status = "disabled";
  88                         };
  89
  90                         uart1: serial@43f90000 {
  91                                 compatible = "fsl,imx35-uart", "fsl,imx21-uart";
  92                                 reg = <0x43f90000 0x4000>;
  93                                 clocks = <&clks 9>, <&clks 70>;
  94                                 clock-names = "ipg", "per";
  95                                 interrupts = <45>;
  96                                 status = "disabled";
  97                         };
  98
  99                         uart2: serial@43f94000 {
 100                                 compatible = "fsl,imx35-uart", "fsl,imx21-uart";
 101                                 reg = <0x43f94000 0x4000>;
 102                                 clocks = <&clks 9>, <&clks 71>;
 103                                 clock-names = "ipg", "per";
 104                                 interrupts = <32>;
 105                                 status = "disabled";
 106                         };
 107
 108                         i2c2: i2c@43f98000 {
 109                                 #address-cells = <1>;
 110                                 #size-cells = <0>;
 111                                 compatible = "fsl,imx35-i2c", "fsl,imx1-i2c";
 112                                 reg = <0x43f98000 0x4000>;
 113                                 clocks = <&clks 52>;
 114                                 clock-names = "ipg_per";
 115                                 interrupts = <4>;
 116                                 status = "disabled";
 117                         };
 118
 119                         ssi1: ssi@43fa0000 {
 120                                 #sound-dai-cells = <0>;
 121                                 compatible = "fsl,imx35-ssi", "fsl,imx21-ssi";
 122                                 reg = <0x43fa0000 0x4000>;
 123                                 interrupts = <11>;
 124                                 clocks = <&clks 68>;
 125                                 dmas = <&sdma 28 0 0>,
 126                                        <&sdma 29 0 0>;
 127                                 dma-names = "rx", "tx";
 128                                 fsl,fifo-depth = <15>;
 129                                 status = "disabled";
 130                         };
 131
 132                         spi1: cspi@43fa4000 {
 133                                 #address-cells = <1>;
 134                                 #size-cells = <0>;
 135                                 compatible = "fsl,imx35-cspi";
 136                                 reg = <0x43fa4000 0x4000>;
 137                                 clocks = <&clks 35 &clks 35>;
 138                                 clock-names = "ipg", "per";
 139                                 interrupts = <14>;
 140                                 status = "disabled";
 141                         };
 142
 143                         kpp: kpp@43fa8000 {
 144                                 compatible = "fsl,imx35-kpp", "fsl,imx21-kpp";
 145                                 reg = <0x43fa8000 0x4000>;
 146                                 interrupts = <24>;
 147                                 clocks = <&clks 56>;
 148                                 status = "disabled";
 149                         };
 150
 151                         iomuxc: iomuxc@43fac000 {
 152                                 compatible = "fsl,imx35-iomuxc";
 153                                 reg = <0x43fac000 0x4000>;
 154                         };
 155                 };
 156
 157                 spba: spba-bus@50000000 {
 158                         compatible = "fsl,spba-bus", "simple-bus";
 159                         #address-cells = <1>;
 160                         #size-cells = <1>;
 161                         reg = <0x50000000 0x100000>;
 162                         ranges;
 163
 164                         uart3: serial@5000c000 {
 165                                 compatible = "fsl,imx35-uart", "fsl,imx21-uart";
 166                                 reg = <0x5000c000 0x4000>;
 167                                 clocks = <&clks 9>, <&clks 72>;
 168                                 clock-names = "ipg", "per";
 169                                 interrupts = <18>;
 170                                 status = "disabled";
 171                         };
 172
 173                         spi2: cspi@50010000 {
 174                                 #address-cells = <1>;
 175                                 #size-cells = <0>;
 176                                 compatible = "fsl,imx35-cspi";
 177                                 reg = <0x50010000 0x4000>;
 178                                 interrupts = <13>;
 179                                 clocks = <&clks 36 &clks 36>;
 180                                 clock-names = "ipg", "per";
 181                                 status = "disabled";
 182                         };
 183
 184                         fec: fec@50038000 {
 185                                 compatible = "fsl,imx35-fec", "fsl,imx27-fec";
 186                                 reg = <0x50038000 0x4000>;
 187                                 clocks = <&clks 46>, <&clks 8>;
 188                                 clock-names = "ipg", "ahb";
 189                                 interrupts = <57>;
 190                                 status = "disabled";
 191                         };
 192                 };
 193
 194                 aips2: aips@53f00000 {
 195                         compatible = "fsl,aips", "simple-bus";
 196                         #address-cells = <1>;
 197                         #size-cells = <1>;
 198                         reg = <0x53f00000 0x100000>;
 199                         ranges;
 200
 201                         clks: ccm@53f80000 {
 202                                 compatible = "fsl,imx35-ccm";
 203                                 reg = <0x53f80000 0x4000>;
 204                                 interrupts = <31>;
 205                                 #clock-cells = <1>;
 206                         };
 207
 208                         gpt: timer@53f90000 {
 209                                 compatible = "fsl,imx35-gpt", "fsl,imx31-gpt";
 210                                 reg = <0x53f90000 0x4000>;
 211                                 interrupts = <29>;
 212                                 clocks = <&clks 9>, <&clks 50>;
 213                                 clock-names = "ipg", "per";
 214                         };
 215
 216                         gpio3: gpio@53fa4000 {
 217                                 compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
 218                                 reg = <0x53fa4000 0x4000>;
 219                                 interrupts = <56>;
 220                                 gpio-controller;
 221                                 #gpio-cells = <2>;
 222                                 interrupt-controller;
 223                                 #interrupt-cells = <2>;
 224                         };
 225
 226                         esdhc1: esdhc@53fb4000 {
 227                                 compatible = "fsl,imx35-esdhc";
 228                                 reg = <0x53fb4000 0x4000>;
 229                                 interrupts = <7>;
 230                                 clocks = <&clks 9>, <&clks 8>, <&clks 43>;
 231                                 clock-names = "ipg", "ahb", "per";
 232                                 status = "disabled";
 233                         };
 234
 235                         esdhc2: esdhc@53fb8000 {
 236                                 compatible = "fsl,imx35-esdhc";
 237                                 reg = <0x53fb8000 0x4000>;
 238                                 interrupts = <8>;
 239                                 clocks = <&clks 9>, <&clks 8>, <&clks 44>;
 240                                 clock-names = "ipg", "ahb", "per";
 241                                 status = "disabled";
 242                         };
 243
 244                         esdhc3: esdhc@53fbc000 {
 245                                 compatible = "fsl,imx35-esdhc";
 246                                 reg = <0x53fbc000 0x4000>;
 247                                 interrupts = <9>;
 248                                 clocks = <&clks 9>, <&clks 8>, <&clks 45>;
 249                                 clock-names = "ipg", "ahb", "per";
 250                                 status = "disabled";
 251                         };
 252
 253                         audmux: audmux@53fc4000 {
 254                                 compatible = "fsl,imx35-audmux", "fsl,imx31-audmux";
 255                                 reg = <0x53fc4000 0x4000>;
 256                                 status = "disabled";
 257                         };
 258
 259                         gpio1: gpio@53fcc000 {
 260                                 compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
 261                                 reg = <0x53fcc000 0x4000>;
 262                                 interrupts = <52>;
 263                                 gpio-controller;
 264                                 #gpio-cells = <2>;
 265                                 interrupt-controller;
 266                                 #interrupt-cells = <2>;
 267                         };
 268
 269                         gpio2: gpio@53fd0000 {
 270                                 compatible = "fsl,imx35-gpio", "fsl,imx31-gpio";
 271                                 reg = <0x53fd0000 0x4000>;
 272                                 interrupts = <51>;
 273                                 gpio-controller;
 274                                 #gpio-cells = <2>;
 275                                 interrupt-controller;
 276                                 #interrupt-cells = <2>;
 277                         };
 278
 279                         sdma: sdma@53fd4000 {
 280                                 compatible = "fsl,imx35-sdma";
 281                                 reg = <0x53fd4000 0x4000>;
 282                                 clocks = <&clks 9>, <&clks 65>;
 283                                 clock-names = "ipg", "ahb";
 284                                 #dma-cells = <3>;
 285                                 interrupts = <34>;
 286                                 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx35.bin";
 287                         };
 288
 289                         wdog: wdog@53fdc000 {
 290                                 compatible = "fsl,imx35-wdt", "fsl,imx21-wdt";
 291                                 reg = <0x53fdc000 0x4000>;
 292                                 clocks = <&clks 74>;
 293                                 clock-names = "";
 294                                 interrupts = <55>;
 295                         };
 296
 297                         can1: can@53fe4000 {
 298                                 compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
 299                                 reg = <0x53fe4000 0x1000>;
 300                                 clocks = <&clks 33>, <&clks 33>;
 301                                 clock-names = "ipg", "per";
 302                                 interrupts = <43>;
 303                                 status = "disabled";
 304                         };
 305
 306                         can2: can@53fe8000 {
 307                                 compatible = "fsl,imx35-flexcan", "fsl,p1010-flexcan";
 308                                 reg = <0x53fe8000 0x1000>;
 309                                 clocks = <&clks 34>, <&clks 34>;
 310                                 clock-names = "ipg", "per";
 311                                 interrupts = <44>;
 312                                 status = "disabled";
 313                         };
 314
 315                         iim@53ff0000 {
 316                                 compatible = "fsl,imx35-iim";
 317                                 reg = <0x53ff0000 0x4000>;
 318                                 interrupts = <19>;
 319                                 clocks = <&clks 80>;
 320                         };
 321
 322                         usbotg: usb@53ff4000 {
 323                                 compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 324                                 reg = <0x53ff4000 0x0200>;
 325                                 interrupts = <37>;
 326                                 clocks = <&clks 9>, <&clks 73>, <&clks 28>;
 327                                 clock-names = "ipg", "ahb", "per";
 328                                 fsl,usbmisc = <&usbmisc 0>;
 329                                 fsl,usbphy = <&usbphy0>;
 330                                 status = "disabled";
 331                         };
 332
 333                         usbhost1: usb@53ff4400 {
 334                                 compatible = "fsl,imx35-usb", "fsl,imx27-usb";
 335                                 reg = <0x53ff4400 0x0200>;
 336                                 interrupts = <35>;
 337                                 clocks = <&clks 9>, <&clks 73>, <&clks 28>;
 338                                 clock-names = "ipg", "ahb", "per";
 339                                 fsl,usbmisc = <&usbmisc 1>;
 340                                 fsl,usbphy = <&usbphy1>;
 341                                 dr_mode = "host";
 342                                 status = "disabled";
 343                         };
 344
 345                         usbmisc: usbmisc@53ff4600 {
 346                                 #index-cells = <1>;
 347                                 compatible = "fsl,imx35-usbmisc";
 348                                 reg = <0x53ff4600 0x00f>;
 349                         };
 350                 };
 351
 352                 emi@80000000 { /* External Memory Interface */
 353                         compatible = "fsl,emi", "simple-bus";
 354                         #address-cells = <1>;
 355                         #size-cells = <1>;
 356                         reg = <0x80000000 0x40000000>;
 357                         ranges;
 358
 359                         nfc: nand@bb000000 {
 360                                 #address-cells = <1>;
 361                                 #size-cells = <1>;
 362                                 compatible = "fsl,imx35-nand", "fsl,imx25-nand";
 363                                 reg = <0xbb000000 0x2000>;
 364                                 clocks = <&clks 29>;
 365                                 clock-names = "";
 366                                 interrupts = <33>;
 367                                 status = "disabled";
 368                         };
 369
 370                         weim: weim@b8002000 {
 371                                 #address-cells = <2>;
 372                                 #size-cells = <1>;
 373                                 clocks = <&clks 0>;
 374                                 compatible = "fsl,imx35-weim", "fsl,imx27-weim";
 375                                 reg = <0xb8002000 0x1000>;
 376                                 ranges = <
 377                                         0 0 0xa0000000 0x8000000
 378                                         1 0 0xa8000000 0x8000000
 379                                         2 0 0xb0000000 0x2000000
 380                                         3 0 0xb2000000 0x2000000
 381                                         4 0 0xb4000000 0x2000000
 382                                         5 0 0xb6000000 0x2000000
 383                                 >;
 384                                 status = "disabled";
 385                         };
 386                 };
 387         };
 388
 389         usbphy {
 390                 compatible = "simple-bus";
 391                 #address-cells = <1>;
 392                 #size-cells = <0>;
 393
 394                 usbphy0: usb-phy@0 {
 395                         reg = <0>;
 396                         compatible = "usb-nop-xceiv";
 397                 };
 398
 399                 usbphy1: usb-phy@1 {
 400                         reg = <1>;
 401                         compatible = "usb-nop-xceiv";
 402                 };
 403         };
 404 };