2 * Copyright 2014 Chen-Yu Tsai
4 * Chen-Yu Tsai <wens@csie.org>
6 * This file is dual-licensed: you can use it either under the terms
7 * of the GPL or the X11 license, at your option. Note that this dual
8 * licensing only applies to this file, and not this project as a
11 * a) This file is free software; you can redistribute it and/or
12 * modify it under the terms of the GNU General Public License as
13 * published by the Free Software Foundation; either version 2 of the
14 * License, or (at your option) any later version.
16 * This file is distributed in the hope that it will be useful,
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
19 * GNU General Public License for more details.
23 * b) Permission is hereby granted, free of charge, to any person
24 * obtaining a copy of this software and associated documentation
25 * files (the "Software"), to deal in the Software without
26 * restriction, including without limitation the rights to use,
27 * copy, modify, merge, publish, distribute, sublicense, and/or
28 * sell copies of the Software, and to permit persons to whom the
29 * Software is furnished to do so, subject to the following
32 * The above copyright notice and this permission notice shall be
33 * included in all copies or substantial portions of the Software.
35 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
36 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
37 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
38 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
39 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
40 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
41 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
42 * OTHER DEALINGS IN THE SOFTWARE.
45 #include <dt-bindings/interrupt-controller/arm-gic.h>
47 #include <dt-bindings/clock/sun8i-a23-a33-ccu.h>
48 #include <dt-bindings/reset/sun8i-a23-a33-ccu.h>
51 interrupt-parent = <&gic>;
60 simplefb_lcd: framebuffer-lcd0 {
61 compatible = "allwinner,simple-framebuffer",
63 allwinner,pipeline = "de_be0-lcd0";
64 clocks = <&ccu CLK_BUS_LCD>, <&ccu CLK_BUS_DE_BE>,
65 <&ccu CLK_LCD_CH0>, <&ccu CLK_DE_BE>,
66 <&ccu CLK_DRAM_DE_BE>, <&ccu CLK_DRC>;
72 /* compatible gets set in SoC specific dtsi file */
73 allwinner,pipelines = <&fe0>;
78 compatible = "arm,armv7-timer";
79 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
80 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
81 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
82 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
83 clock-frequency = <24000000>;
84 arm,cpu-registers-not-fw-configured;
88 enable-method = "allwinner,sun8i-a23";
93 compatible = "arm,cortex-a7";
99 compatible = "arm,cortex-a7";
106 #address-cells = <1>;
112 compatible = "fixed-clock";
113 clock-frequency = <24000000>;
114 clock-accuracy = <50000>;
115 clock-output-names = "osc24M";
118 ext_osc32k: ext_osc32k_clk {
120 compatible = "fixed-clock";
121 clock-frequency = <32768>;
122 clock-accuracy = <50000>;
123 clock-output-names = "ext-osc32k";
128 compatible = "simple-bus";
129 #address-cells = <1>;
133 system-control@1c00000 {
134 compatible = "allwinner,sun8i-a23-system-control";
135 reg = <0x01c00000 0x30>;
136 #address-cells = <1>;
140 sram_c: sram@1d00000 {
141 compatible = "mmio-sram";
142 reg = <0x01d00000 0x80000>;
143 #address-cells = <1>;
145 ranges = <0 0x01d00000 0x80000>;
147 ve_sram: sram-section@0 {
148 compatible = "allwinner,sun8i-a23-sram-c1",
149 "allwinner,sun4i-a10-sram-c1";
150 reg = <0x000000 0x80000>;
155 dma: dma-controller@1c02000 {
156 compatible = "allwinner,sun8i-a23-dma";
157 reg = <0x01c02000 0x1000>;
158 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
159 clocks = <&ccu CLK_BUS_DMA>;
160 resets = <&ccu RST_BUS_DMA>;
164 nfc: nand-controller@1c03000 {
165 compatible = "allwinner,sun8i-a23-nand-controller";
166 reg = <0x01c03000 0x1000>;
167 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
168 clocks = <&ccu CLK_BUS_NAND>, <&ccu CLK_NAND>;
169 clock-names = "ahb", "mod";
170 resets = <&ccu RST_BUS_NAND>;
174 pinctrl-names = "default";
175 pinctrl-0 = <&nand_pins &nand_cs0_pin &nand_rb0_pin>;
177 #address-cells = <1>;
181 tcon0: lcd-controller@1c0c000 {
182 /* compatible gets set in SoC specific dtsi file */
183 reg = <0x01c0c000 0x1000>;
184 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
185 clocks = <&ccu CLK_BUS_LCD>,
189 clock-output-names = "tcon-pixel-clock";
191 resets = <&ccu RST_BUS_LCD>;
196 #address-cells = <1>;
202 tcon0_in_drc0: endpoint {
203 remote-endpoint = <&drc0_out_tcon0>;
214 compatible = "allwinner,sun7i-a20-mmc";
215 reg = <0x01c0f000 0x1000>;
216 clocks = <&ccu CLK_BUS_MMC0>,
218 <&ccu CLK_MMC0_OUTPUT>,
219 <&ccu CLK_MMC0_SAMPLE>;
224 resets = <&ccu RST_BUS_MMC0>;
226 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
227 pinctrl-names = "default";
228 pinctrl-0 = <&mmc0_pins>;
230 #address-cells = <1>;
235 compatible = "allwinner,sun7i-a20-mmc";
236 reg = <0x01c10000 0x1000>;
237 clocks = <&ccu CLK_BUS_MMC1>,
239 <&ccu CLK_MMC1_OUTPUT>,
240 <&ccu CLK_MMC1_SAMPLE>;
245 resets = <&ccu RST_BUS_MMC1>;
247 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
249 #address-cells = <1>;
254 compatible = "allwinner,sun7i-a20-mmc";
255 reg = <0x01c11000 0x1000>;
256 clocks = <&ccu CLK_BUS_MMC2>,
258 <&ccu CLK_MMC2_OUTPUT>,
259 <&ccu CLK_MMC2_SAMPLE>;
264 resets = <&ccu RST_BUS_MMC2>;
266 interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
268 #address-cells = <1>;
272 usb_otg: usb@1c19000 {
273 /* compatible gets set in SoC specific dtsi file */
274 reg = <0x01c19000 0x0400>;
275 clocks = <&ccu CLK_BUS_OTG>;
276 resets = <&ccu RST_BUS_OTG>;
277 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
278 interrupt-names = "mc";
281 extcon = <&usbphy 0>;
286 usbphy: phy@1c19400 {
288 * compatible and address regions get set in
289 * SoC specific dtsi file
291 clocks = <&ccu CLK_USB_PHY0>,
293 clock-names = "usb0_phy",
295 resets = <&ccu RST_USB_PHY0>,
297 reset-names = "usb0_reset",
304 compatible = "allwinner,sun8i-a23-ehci", "generic-ehci";
305 reg = <0x01c1a000 0x100>;
306 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
307 clocks = <&ccu CLK_BUS_EHCI>;
308 resets = <&ccu RST_BUS_EHCI>;
314 compatible = "allwinner,sun8i-a23-ohci", "generic-ohci";
315 reg = <0x01c1a400 0x100>;
316 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
317 clocks = <&ccu CLK_BUS_OHCI>, <&ccu CLK_USB_OHCI>;
318 resets = <&ccu RST_BUS_OHCI>;
324 reg = <0x01c20000 0x400>;
325 clocks = <&osc24M>, <&rtc 0>;
326 clock-names = "hosc", "losc";
331 pio: pinctrl@1c20800 {
332 /* compatible gets set in SoC specific dtsi file */
333 reg = <0x01c20800 0x400>;
334 /* interrupts get set in SoC specific dtsi file */
335 clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>;
336 clock-names = "apb", "hosc", "losc";
338 interrupt-controller;
339 #interrupt-cells = <3>;
342 i2c0_pins: i2c0-pins {
347 i2c1_pins: i2c1-pins {
352 i2c2_pins: i2c2-pins {
353 pins = "PE12", "PE13";
357 lcd_rgb666_pins: lcd-rgb666-pins {
358 pins = "PD2", "PD3", "PD4", "PD5", "PD6", "PD7",
359 "PD10", "PD11", "PD12", "PD13", "PD14", "PD15",
360 "PD18", "PD19", "PD20", "PD21", "PD22", "PD23",
361 "PD24", "PD25", "PD26", "PD27";
365 mmc0_pins: mmc0-pins {
366 pins = "PF0", "PF1", "PF2",
369 drive-strength = <30>;
373 mmc1_pg_pins: mmc1-pg-pins {
374 pins = "PG0", "PG1", "PG2",
377 drive-strength = <30>;
381 mmc2_8bit_pins: mmc2-8bit-pins {
382 pins = "PC5", "PC6", "PC8",
383 "PC9", "PC10", "PC11",
384 "PC12", "PC13", "PC14",
387 drive-strength = <30>;
391 nand_pins: nand-pins {
392 pins = "PC0", "PC1", "PC2", "PC5",
393 "PC8", "PC9", "PC10", "PC11",
394 "PC12", "PC13", "PC14", "PC15";
398 nand_cs0_pin: nand-cs0-pin {
404 nand_cs1_pin: nand-cs1-pin {
410 nand_rb0_pin: nand-rb0-pin {
416 nand_rb1_pin: nand-rb1-pin {
427 uart0_pf_pins: uart0-pf-pins {
432 uart1_pg_pins: uart1-pg-pins {
437 uart1_cts_rts_pg_pins: uart1-cts-rts-pg-pins {
444 compatible = "allwinner,sun4i-a10-timer";
445 reg = <0x01c20c00 0xa0>;
446 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
447 <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
451 wdt0: watchdog@1c20ca0 {
452 compatible = "allwinner,sun6i-a31-wdt";
453 reg = <0x01c20ca0 0x20>;
454 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
458 compatible = "allwinner,sun7i-a20-pwm";
459 reg = <0x01c21400 0xc>;
465 lradc: lradc@1c22800 {
466 compatible = "allwinner,sun4i-a10-lradc-keys";
467 reg = <0x01c22800 0x100>;
468 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
472 uart0: serial@1c28000 {
473 compatible = "snps,dw-apb-uart";
474 reg = <0x01c28000 0x400>;
475 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
478 clocks = <&ccu CLK_BUS_UART0>;
479 resets = <&ccu RST_BUS_UART0>;
480 dmas = <&dma 6>, <&dma 6>;
481 dma-names = "rx", "tx";
485 uart1: serial@1c28400 {
486 compatible = "snps,dw-apb-uart";
487 reg = <0x01c28400 0x400>;
488 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
491 clocks = <&ccu CLK_BUS_UART1>;
492 resets = <&ccu RST_BUS_UART1>;
493 dmas = <&dma 7>, <&dma 7>;
494 dma-names = "rx", "tx";
498 uart2: serial@1c28800 {
499 compatible = "snps,dw-apb-uart";
500 reg = <0x01c28800 0x400>;
501 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
504 clocks = <&ccu CLK_BUS_UART2>;
505 resets = <&ccu RST_BUS_UART2>;
506 dmas = <&dma 8>, <&dma 8>;
507 dma-names = "rx", "tx";
511 uart3: serial@1c28c00 {
512 compatible = "snps,dw-apb-uart";
513 reg = <0x01c28c00 0x400>;
514 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
517 clocks = <&ccu CLK_BUS_UART3>;
518 resets = <&ccu RST_BUS_UART3>;
519 dmas = <&dma 9>, <&dma 9>;
520 dma-names = "rx", "tx";
524 uart4: serial@1c29000 {
525 compatible = "snps,dw-apb-uart";
526 reg = <0x01c29000 0x400>;
527 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
530 clocks = <&ccu CLK_BUS_UART4>;
531 resets = <&ccu RST_BUS_UART4>;
532 dmas = <&dma 10>, <&dma 10>;
533 dma-names = "rx", "tx";
538 compatible = "allwinner,sun6i-a31-i2c";
539 reg = <0x01c2ac00 0x400>;
540 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
541 clocks = <&ccu CLK_BUS_I2C0>;
542 resets = <&ccu RST_BUS_I2C0>;
543 pinctrl-names = "default";
544 pinctrl-0 = <&i2c0_pins>;
546 #address-cells = <1>;
551 compatible = "allwinner,sun6i-a31-i2c";
552 reg = <0x01c2b000 0x400>;
553 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
554 clocks = <&ccu CLK_BUS_I2C1>;
555 resets = <&ccu RST_BUS_I2C1>;
556 pinctrl-names = "default";
557 pinctrl-0 = <&i2c1_pins>;
559 #address-cells = <1>;
564 compatible = "allwinner,sun6i-a31-i2c";
565 reg = <0x01c2b400 0x400>;
566 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
567 clocks = <&ccu CLK_BUS_I2C2>;
568 resets = <&ccu RST_BUS_I2C2>;
569 pinctrl-names = "default";
570 pinctrl-0 = <&i2c2_pins>;
572 #address-cells = <1>;
577 compatible = "allwinner,sun8i-a23-mali",
578 "allwinner,sun7i-a20-mali", "arm,mali-400";
579 reg = <0x01c40000 0x10000>;
580 interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
581 <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
582 <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
583 <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
584 <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
585 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
586 <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
587 interrupt-names = "gp",
594 clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
595 clock-names = "bus", "core";
596 resets = <&ccu RST_BUS_GPU>;
597 #cooling-cells = <2>;
599 assigned-clocks = <&ccu CLK_GPU>;
600 assigned-clock-rates = <384000000>;
603 gic: interrupt-controller@1c81000 {
604 compatible = "arm,gic-400";
605 reg = <0x01c81000 0x1000>,
609 interrupt-controller;
610 #interrupt-cells = <3>;
611 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
614 fe0: display-frontend@1e00000 {
615 /* compatible gets set in SoC specific dtsi file */
616 reg = <0x01e00000 0x20000>;
617 interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
618 clocks = <&ccu CLK_BUS_DE_FE>, <&ccu CLK_DE_FE>,
619 <&ccu CLK_DRAM_DE_FE>;
620 clock-names = "ahb", "mod",
622 resets = <&ccu RST_BUS_DE_FE>;
625 #address-cells = <1>;
631 fe0_out_be0: endpoint {
632 remote-endpoint = <&be0_in_fe0>;
638 be0: display-backend@1e60000 {
639 /* compatible gets set in SoC specific dtsi file */
640 reg = <0x01e60000 0x10000>;
641 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
642 clocks = <&ccu CLK_BUS_DE_BE>, <&ccu CLK_DE_BE>,
643 <&ccu CLK_DRAM_DE_BE>;
644 clock-names = "ahb", "mod",
646 resets = <&ccu RST_BUS_DE_BE>;
649 #address-cells = <1>;
655 be0_in_fe0: endpoint {
656 remote-endpoint = <&fe0_out_be0>;
663 be0_out_drc0: endpoint {
664 remote-endpoint = <&drc0_in_be0>;
671 /* compatible gets set in SoC specific dtsi file */
672 reg = <0x01e70000 0x10000>;
673 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
674 clocks = <&ccu CLK_BUS_DRC>, <&ccu CLK_DRC>,
676 clock-names = "ahb", "mod", "ram";
677 resets = <&ccu RST_BUS_DRC>;
679 assigned-clocks = <&ccu CLK_DRC>;
680 assigned-clock-rates = <300000000>;
683 #address-cells = <1>;
689 drc0_in_be0: endpoint {
690 remote-endpoint = <&be0_out_drc0>;
697 drc0_out_tcon0: endpoint {
698 remote-endpoint = <&tcon0_in_drc0>;
705 compatible = "allwinner,sun8i-a23-rtc";
706 reg = <0x01f00000 0x400>;
707 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
708 <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
709 clock-output-names = "osc32k", "osc32k-out";
710 clocks = <&ext_osc32k>;
714 nmi_intc: interrupt-controller@1f00c00 {
715 compatible = "allwinner,sun6i-a31-r-intc";
716 interrupt-controller;
717 #interrupt-cells = <2>;
718 reg = <0x01f00c00 0x400>;
719 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
723 compatible = "allwinner,sun8i-a23-prcm";
724 reg = <0x01f01400 0x200>;
727 compatible = "fixed-factor-clock";
732 clock-output-names = "ar100";
736 compatible = "fixed-factor-clock";
741 clock-output-names = "ahb0";
745 compatible = "allwinner,sun8i-a23-apb0-clk";
748 clock-output-names = "apb0";
751 apb0_gates: apb0_gates_clk {
752 compatible = "allwinner,sun8i-a23-apb0-gates-clk";
755 clock-output-names = "apb0_pio", "apb0_timer",
756 "apb0_rsb", "apb0_uart",
761 compatible = "allwinner,sun6i-a31-clock-reset";
765 codec_analog: codec-analog {
766 compatible = "allwinner,sun8i-a23-codec-analog";
771 compatible = "allwinner,sun8i-a23-cpuconfig";
772 reg = <0x01f01c00 0x300>;
775 r_uart: serial@1f02800 {
776 compatible = "snps,dw-apb-uart";
777 reg = <0x01f02800 0x400>;
778 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
781 clocks = <&apb0_gates 4>;
782 resets = <&apb0_rst 4>;
787 compatible = "allwinner,sun8i-a23-i2c",
788 "allwinner,sun6i-a31-i2c";
789 reg = <0x01f02400 0x400>;
790 interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
791 pinctrl-names = "default";
792 pinctrl-0 = <&r_i2c_pins>;
793 clocks = <&apb0_gates 6>;
794 resets = <&apb0_rst 6>;
796 #address-cells = <1>;
800 r_pio: pinctrl@1f02c00 {
801 compatible = "allwinner,sun8i-a23-r-pinctrl";
802 reg = <0x01f02c00 0x400>;
803 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
804 clocks = <&apb0_gates 0>, <&osc24M>, <&rtc 0>;
805 clock-names = "apb", "hosc", "losc";
806 resets = <&apb0_rst 0>;
808 interrupt-controller;
809 #interrupt-cells = <3>;
812 r_i2c_pins: r-i2c-pins {
818 r_rsb_pins: r-rsb-pins {
821 drive-strength = <20>;
825 r_uart_pins_a: r-uart-pins {
832 compatible = "allwinner,sun8i-a23-rsb";
833 reg = <0x01f03400 0x400>;
834 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
835 clocks = <&apb0_gates 3>;
836 clock-frequency = <3000000>;
837 resets = <&apb0_rst 3>;
838 pinctrl-names = "default";
839 pinctrl-0 = <&r_rsb_pins>;
841 #address-cells = <1>;