arch/xtensa/kernel/setup.c

   1 /*
   2  * arch/xtensa/kernel/setup.c
   3  *
   4  * This file is subject to the terms and conditions of the GNU General Public
   5  * License.  See the file "COPYING" in the main directory of this archive
   6  * for more details.
   7  *
   8  * Copyright (C) 1995  Linus Torvalds
   9  * Copyright (C) 2001 - 2005  Tensilica Inc.
  10  * Copyright (C) 2014 - 2016  Cadence Design Systems Inc.
  11  *
  12  * Chris Zankel <chris@zankel.net>
  13  * Joe Taylor   <joe@tensilica.com, joetylr@yahoo.com>
  14  * Kevin Chea
  15  * Marc Gauthier<marc@tensilica.com> <marc@alumni.uwaterloo.ca>
  16  */
  17
  18 #include <linux/errno.h>
  19 #include <linux/init.h>
  20 #include <linux/mm.h>
  21 #include <linux/proc_fs.h>
  22 #include <linux/screen_info.h>
  23 #include <linux/kernel.h>
  24 #include <linux/percpu.h>
  25 #include <linux/cpu.h>
  26 #include <linux/of.h>
  27 #include <linux/of_fdt.h>
  28
  29 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
  30 # include <linux/console.h>
  31 #endif
  32
  33 #ifdef CONFIG_PROC_FS
  34 # include <linux/seq_file.h>
  35 #endif
  36
  37 #include <asm/bootparam.h>
  38 #include <asm/kasan.h>
  39 #include <asm/mmu_context.h>
  40 #include <asm/pgtable.h>
  41 #include <asm/processor.h>
  42 #include <asm/timex.h>
  43 #include <asm/platform.h>
  44 #include <asm/page.h>
  45 #include <asm/setup.h>
  46 #include <asm/param.h>
  47 #include <asm/smp.h>
  48 #include <asm/sysmem.h>
  49
  50 #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE)
  51 struct screen_info screen_info = {
  52         .orig_x = 0,
  53         .orig_y = 24,
  54         .orig_video_cols = 80,
  55         .orig_video_lines = 24,
  56         .orig_video_isVGA = 1,
  57         .orig_video_points = 16,
  58 };
  59 #endif
  60
  61 #ifdef CONFIG_BLK_DEV_INITRD
  62 extern unsigned long initrd_start;
  63 extern unsigned long initrd_end;
  64 extern int initrd_below_start_ok;
  65 #endif
  66
  67 #ifdef CONFIG_OF
  68 void *dtb_start = __dtb_start;
  69 #endif
  70
  71 extern unsigned long loops_per_jiffy;
  72
  73 /* Command line specified as configuration option. */
  74
  75 static char __initdata command_line[COMMAND_LINE_SIZE];
  76
  77 #ifdef CONFIG_CMDLINE_BOOL
  78 static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE;
  79 #endif
  80
  81 #ifdef CONFIG_PARSE_BOOTPARAM
  82 /*
  83  * Boot parameter parsing.
  84  *
  85  * The Xtensa port uses a list of variable-sized tags to pass data to
  86  * the kernel. The first tag must be a BP_TAG_FIRST tag for the list
  87  * to be recognised. The list is terminated with a zero-sized
  88  * BP_TAG_LAST tag.
  89  */
  90
  91 typedef struct tagtable {
  92         u32 tag;
  93         int (*parse)(const bp_tag_t*);
  94 } tagtable_t;
  95
  96 #define __tagtable(tag, fn) static tagtable_t __tagtable_##fn           \
  97         __attribute__((used, section(".taglist"))) = { tag, fn }
  98
  99 /* parse current tag */
 100
 101 static int __init parse_tag_mem(const bp_tag_t *tag)
 102 {
 103         struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
 104
 105         if (mi->type != MEMORY_TYPE_CONVENTIONAL)
 106                 return -1;
 107
 108         return memblock_add(mi->start, mi->end - mi->start);
 109 }
 110
 111 __tagtable(BP_TAG_MEMORY, parse_tag_mem);
 112
 113 #ifdef CONFIG_BLK_DEV_INITRD
 114
 115 static int __init parse_tag_initrd(const bp_tag_t* tag)
 116 {
 117         struct bp_meminfo *mi = (struct bp_meminfo *)(tag->data);
 118
 119         initrd_start = (unsigned long)__va(mi->start);
 120         initrd_end = (unsigned long)__va(mi->end);
 121
 122         return 0;
 123 }
 124
 125 __tagtable(BP_TAG_INITRD, parse_tag_initrd);
 126
 127 #endif /* CONFIG_BLK_DEV_INITRD */
 128
 129 #ifdef CONFIG_OF
 130
 131 static int __init parse_tag_fdt(const bp_tag_t *tag)
 132 {
 133         dtb_start = __va(tag->data[0]);
 134         return 0;
 135 }
 136
 137 __tagtable(BP_TAG_FDT, parse_tag_fdt);
 138
 139 #endif /* CONFIG_OF */
 140
 141 static int __init parse_tag_cmdline(const bp_tag_t* tag)
 142 {
 143         strlcpy(command_line, (char *)(tag->data), COMMAND_LINE_SIZE);
 144         return 0;
 145 }
 146
 147 __tagtable(BP_TAG_COMMAND_LINE, parse_tag_cmdline);
 148
 149 static int __init parse_bootparam(const bp_tag_t* tag)
 150 {
 151         extern tagtable_t __tagtable_begin, __tagtable_end;
 152         tagtable_t *t;
 153
 154         /* Boot parameters must start with a BP_TAG_FIRST tag. */
 155
 156         if (tag->id != BP_TAG_FIRST) {
 157                 pr_warn("Invalid boot parameters!\n");
 158                 return 0;
 159         }
 160
 161         tag = (bp_tag_t*)((unsigned long)tag + sizeof(bp_tag_t) + tag->size);
 162
 163         /* Parse all tags. */
 164
 165         while (tag != NULL && tag->id != BP_TAG_LAST) {
 166                 for (t = &__tagtable_begin; t < &__tagtable_end; t++) {
 167                         if (tag->id == t->tag) {
 168                                 t->parse(tag);
 169                                 break;
 170                         }
 171                 }
 172                 if (t == &__tagtable_end)
 173                         pr_warn("Ignoring tag 0x%08x\n", tag->id);
 174                 tag = (bp_tag_t*)((unsigned long)(tag + 1) + tag->size);
 175         }
 176
 177         return 0;
 178 }
 179 #else
 180 static int __init parse_bootparam(const bp_tag_t *tag)
 181 {
 182         pr_info("Ignoring boot parameters at %p\n", tag);
 183         return 0;
 184 }
 185 #endif
 186
 187 #ifdef CONFIG_OF
 188
 189 #if !XCHAL_HAVE_PTP_MMU || XCHAL_HAVE_SPANNING_WAY
 190 unsigned long xtensa_kio_paddr = XCHAL_KIO_DEFAULT_PADDR;
 191 EXPORT_SYMBOL(xtensa_kio_paddr);
 192
 193 static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
 194                 int depth, void *data)
 195 {
 196         const __be32 *ranges;
 197         int len;
 198
 199         if (depth > 1)
 200                 return 0;
 201
 202         if (!of_flat_dt_is_compatible(node, "simple-bus"))
 203                 return 0;
 204
 205         ranges = of_get_flat_dt_prop(node, "ranges", &len);
 206         if (!ranges)
 207                 return 1;
 208         if (len == 0)
 209                 return 1;
 210
 211         xtensa_kio_paddr = of_read_ulong(ranges+1, 1);
 212         /* round down to nearest 256MB boundary */
 213         xtensa_kio_paddr &= 0xf0000000;
 214
 215         init_kio();
 216
 217         return 1;
 218 }
 219 #else
 220 static int __init xtensa_dt_io_area(unsigned long node, const char *uname,
 221                 int depth, void *data)
 222 {
 223         return 1;
 224 }
 225 #endif
 226
 227 void __init early_init_devtree(void *params)
 228 {
 229         early_init_dt_scan(params);
 230         of_scan_flat_dt(xtensa_dt_io_area, NULL);
 231
 232         if (!command_line[0])
 233                 strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 234 }
 235
 236 #endif /* CONFIG_OF */
 237
 238 /*
 239  * Initialize architecture. (Early stage)
 240  */
 241
 242 void __init init_arch(bp_tag_t *bp_start)
 243 {
 244         /* Initialize MMU. */
 245
 246         init_mmu();
 247
 248         /* Initialize initial KASAN shadow map */
 249
 250         kasan_early_init();
 251
 252         /* Parse boot parameters */
 253
 254         if (bp_start)
 255                 parse_bootparam(bp_start);
 256
 257 #ifdef CONFIG_OF
 258         early_init_devtree(dtb_start);
 259 #endif
 260
 261 #ifdef CONFIG_CMDLINE_BOOL
 262         if (!command_line[0])
 263                 strlcpy(command_line, default_command_line, COMMAND_LINE_SIZE);
 264 #endif
 265
 266         /* Early hook for platforms */
 267
 268         platform_init(bp_start);
 269 }
 270
 271 /*
 272  * Initialize system. Setup memory and reserve regions.
 273  */
 274
 275 extern char _end[];
 276 extern char _stext[];
 277 extern char _WindowVectors_text_start;
 278 extern char _WindowVectors_text_end;
 279 extern char _DebugInterruptVector_text_start;
 280 extern char _DebugInterruptVector_text_end;
 281 extern char _KernelExceptionVector_text_start;
 282 extern char _KernelExceptionVector_text_end;
 283 extern char _UserExceptionVector_text_start;
 284 extern char _UserExceptionVector_text_end;
 285 extern char _DoubleExceptionVector_text_start;
 286 extern char _DoubleExceptionVector_text_end;
 287 #if XCHAL_EXCM_LEVEL >= 2
 288 extern char _Level2InterruptVector_text_start;
 289 extern char _Level2InterruptVector_text_end;
 290 #endif
 291 #if XCHAL_EXCM_LEVEL >= 3
 292 extern char _Level3InterruptVector_text_start;
 293 extern char _Level3InterruptVector_text_end;
 294 #endif
 295 #if XCHAL_EXCM_LEVEL >= 4
 296 extern char _Level4InterruptVector_text_start;
 297 extern char _Level4InterruptVector_text_end;
 298 #endif
 299 #if XCHAL_EXCM_LEVEL >= 5
 300 extern char _Level5InterruptVector_text_start;
 301 extern char _Level5InterruptVector_text_end;
 302 #endif
 303 #if XCHAL_EXCM_LEVEL >= 6
 304 extern char _Level6InterruptVector_text_start;
 305 extern char _Level6InterruptVector_text_end;
 306 #endif
 307 #ifdef CONFIG_SMP
 308 extern char _SecondaryResetVector_text_start;
 309 extern char _SecondaryResetVector_text_end;
 310 #endif
 311 #ifdef CONFIG_XIP_KERNEL
 312 extern char _xip_start[];
 313 extern char _xip_end[];
 314 #endif
 315
 316 static inline int __init_memblock mem_reserve(unsigned long start,
 317                                               unsigned long end)
 318 {
 319         return memblock_reserve(start, end - start);
 320 }
 321
 322 void __init setup_arch(char **cmdline_p)
 323 {
 324         pr_info("config ID: %08x:%08x\n",
 325                 xtensa_get_sr(SREG_EPC), xtensa_get_sr(SREG_EXCSAVE));
 326         if (xtensa_get_sr(SREG_EPC) != XCHAL_HW_CONFIGID0 ||
 327             xtensa_get_sr(SREG_EXCSAVE) != XCHAL_HW_CONFIGID1)
 328                 pr_info("built for config ID: %08x:%08x\n",
 329                         XCHAL_HW_CONFIGID0, XCHAL_HW_CONFIGID1);
 330
 331         *cmdline_p = command_line;
 332         platform_setup(cmdline_p);
 333         strlcpy(boot_command_line, *cmdline_p, COMMAND_LINE_SIZE);
 334
 335         /* Reserve some memory regions */
 336
 337 #ifdef CONFIG_BLK_DEV_INITRD
 338         if (initrd_start < initrd_end &&
 339             !mem_reserve(__pa(initrd_start), __pa(initrd_end)))
 340                 initrd_below_start_ok = 1;
 341         else
 342                 initrd_start = 0;
 343 #endif
 344
 345         mem_reserve(__pa(_stext), __pa(_end));
 346 #ifdef CONFIG_XIP_KERNEL
 347         mem_reserve(__pa(_xip_start), __pa(_xip_end));
 348 #endif
 349
 350 #ifdef CONFIG_VECTORS_OFFSET
 351         mem_reserve(__pa(&_WindowVectors_text_start),
 352                     __pa(&_WindowVectors_text_end));
 353
 354         mem_reserve(__pa(&_DebugInterruptVector_text_start),
 355                     __pa(&_DebugInterruptVector_text_end));
 356
 357         mem_reserve(__pa(&_KernelExceptionVector_text_start),
 358                     __pa(&_KernelExceptionVector_text_end));
 359
 360         mem_reserve(__pa(&_UserExceptionVector_text_start),
 361                     __pa(&_UserExceptionVector_text_end));
 362
 363         mem_reserve(__pa(&_DoubleExceptionVector_text_start),
 364                     __pa(&_DoubleExceptionVector_text_end));
 365
 366 #if XCHAL_EXCM_LEVEL >= 2
 367         mem_reserve(__pa(&_Level2InterruptVector_text_start),
 368                     __pa(&_Level2InterruptVector_text_end));
 369 #endif
 370 #if XCHAL_EXCM_LEVEL >= 3
 371         mem_reserve(__pa(&_Level3InterruptVector_text_start),
 372                     __pa(&_Level3InterruptVector_text_end));
 373 #endif
 374 #if XCHAL_EXCM_LEVEL >= 4
 375         mem_reserve(__pa(&_Level4InterruptVector_text_start),
 376                     __pa(&_Level4InterruptVector_text_end));
 377 #endif
 378 #if XCHAL_EXCM_LEVEL >= 5
 379         mem_reserve(__pa(&_Level5InterruptVector_text_start),
 380                     __pa(&_Level5InterruptVector_text_end));
 381 #endif
 382 #if XCHAL_EXCM_LEVEL >= 6
 383         mem_reserve(__pa(&_Level6InterruptVector_text_start),
 384                     __pa(&_Level6InterruptVector_text_end));
 385 #endif
 386
 387 #endif /* CONFIG_VECTORS_OFFSET */
 388
 389 #ifdef CONFIG_SMP
 390         mem_reserve(__pa(&_SecondaryResetVector_text_start),
 391                     __pa(&_SecondaryResetVector_text_end));
 392 #endif
 393         parse_early_param();
 394         bootmem_init();
 395         kasan_init();
 396         unflatten_and_copy_device_tree();
 397
 398 #ifdef CONFIG_SMP
 399         smp_init_cpus();
 400 #endif
 401
 402         paging_init();
 403         zones_init();
 404
 405 #ifdef CONFIG_VT
 406 # if defined(CONFIG_VGA_CONSOLE)
 407         conswitchp = &vga_con;
 408 # elif defined(CONFIG_DUMMY_CONSOLE)
 409         conswitchp = &dummy_con;
 410 # endif
 411 #endif
 412 }
 413
 414 static DEFINE_PER_CPU(struct cpu, cpu_data);
 415
 416 static int __init topology_init(void)
 417 {
 418         int i;
 419
 420         for_each_possible_cpu(i) {
 421                 struct cpu *cpu = &per_cpu(cpu_data, i);
 422                 cpu->hotpluggable = !!i;
 423                 register_cpu(cpu, i);
 424         }
 425
 426         return 0;
 427 }
 428 subsys_initcall(topology_init);
 429
 430 void cpu_reset(void)
 431 {
 432 #if XCHAL_HAVE_PTP_MMU && IS_ENABLED(CONFIG_MMU)
 433         local_irq_disable();
 434         /*
 435          * We have full MMU: all autoload ways, ways 7, 8 and 9 of DTLB must
 436          * be flushed.
 437          * Way 4 is not currently used by linux.
 438          * Ways 5 and 6 shall not be touched on MMUv2 as they are hardwired.
 439          * Way 5 shall be flushed and way 6 shall be set to identity mapping
 440          * on MMUv3.
 441          */
 442         local_flush_tlb_all();
 443         invalidate_page_directory();
 444 #if XCHAL_HAVE_SPANNING_WAY
 445         /* MMU v3 */
 446         {
 447                 unsigned long vaddr = (unsigned long)cpu_reset;
 448                 unsigned long paddr = __pa(vaddr);
 449                 unsigned long tmpaddr = vaddr + SZ_512M;
 450                 unsigned long tmp0, tmp1, tmp2, tmp3;
 451
 452                 /*
 453                  * Find a place for the temporary mapping. It must not be
 454                  * in the same 512MB region with vaddr or paddr, otherwise
 455                  * there may be multihit exception either on entry to the
 456                  * temporary mapping, or on entry to the identity mapping.
 457                  * (512MB is the biggest page size supported by TLB.)
 458                  */
 459                 while (((tmpaddr ^ paddr) & -SZ_512M) == 0)
 460                         tmpaddr += SZ_512M;
 461
 462                 /* Invalidate mapping in the selected temporary area */
 463                 if (itlb_probe(tmpaddr) & BIT(ITLB_HIT_BIT))
 464                         invalidate_itlb_entry(itlb_probe(tmpaddr));
 465                 if (itlb_probe(tmpaddr + PAGE_SIZE) & BIT(ITLB_HIT_BIT))
 466                         invalidate_itlb_entry(itlb_probe(tmpaddr + PAGE_SIZE));
 467
 468                 /*
 469                  * Map two consecutive pages starting at the physical address
 470                  * of this function to the temporary mapping area.
 471                  */
 472                 write_itlb_entry(__pte((paddr & PAGE_MASK) |
 473                                        _PAGE_HW_VALID |
 474                                        _PAGE_HW_EXEC |
 475                                        _PAGE_CA_BYPASS),
 476                                  tmpaddr & PAGE_MASK);
 477                 write_itlb_entry(__pte(((paddr & PAGE_MASK) + PAGE_SIZE) |
 478                                        _PAGE_HW_VALID |
 479                                        _PAGE_HW_EXEC |
 480                                        _PAGE_CA_BYPASS),
 481                                  (tmpaddr & PAGE_MASK) + PAGE_SIZE);
 482
 483                 /* Reinitialize TLB */
 484                 __asm__ __volatile__ ("movi     %0, 1f\n\t"
 485                                       "movi     %3, 2f\n\t"
 486                                       "add      %0, %0, %4\n\t"
 487                                       "add      %3, %3, %5\n\t"
 488                                       "jx       %0\n"
 489                                       /*
 490                                        * No literal, data or stack access
 491                                        * below this point
 492                                        */
 493                                       "1:\n\t"
 494                                       /* Initialize *tlbcfg */
 495                                       "movi     %0, 0\n\t"
 496                                       "wsr      %0, itlbcfg\n\t"
 497                                       "wsr      %0, dtlbcfg\n\t"
 498                                       /* Invalidate TLB way 5 */
 499                                       "movi     %0, 4\n\t"
 500                                       "movi     %1, 5\n"
 501                                       "1:\n\t"
 502                                       "iitlb    %1\n\t"
 503                                       "idtlb    %1\n\t"
 504                                       "add      %1, %1, %6\n\t"
 505                                       "addi     %0, %0, -1\n\t"
 506                                       "bnez     %0, 1b\n\t"
 507                                       /* Initialize TLB way 6 */
 508                                       "movi     %0, 7\n\t"
 509                                       "addi     %1, %9, 3\n\t"
 510                                       "addi     %2, %9, 6\n"
 511                                       "1:\n\t"
 512                                       "witlb    %1, %2\n\t"
 513                                       "wdtlb    %1, %2\n\t"
 514                                       "add      %1, %1, %7\n\t"
 515                                       "add      %2, %2, %7\n\t"
 516                                       "addi     %0, %0, -1\n\t"
 517                                       "bnez     %0, 1b\n\t"
 518                                       "isync\n\t"
 519                                       /* Jump to identity mapping */
 520                                       "jx       %3\n"
 521                                       "2:\n\t"
 522                                       /* Complete way 6 initialization */
 523                                       "witlb    %1, %2\n\t"
 524                                       "wdtlb    %1, %2\n\t"
 525                                       /* Invalidate temporary mapping */
 526                                       "sub      %0, %9, %7\n\t"
 527                                       "iitlb    %0\n\t"
 528                                       "add      %0, %0, %8\n\t"
 529                                       "iitlb    %0"
 530                                       : "=&a"(tmp0), "=&a"(tmp1), "=&a"(tmp2),
 531                                         "=&a"(tmp3)
 532                                       : "a"(tmpaddr - vaddr),
 533                                         "a"(paddr - vaddr),
 534                                         "a"(SZ_128M), "a"(SZ_512M),
 535                                         "a"(PAGE_SIZE),
 536                                         "a"((tmpaddr + SZ_512M) & PAGE_MASK)
 537                                       : "memory");
 538         }
 539 #endif
 540 #endif
 541         __asm__ __volatile__ ("movi     a2, 0\n\t"
 542                               "wsr      a2, icountlevel\n\t"
 543                               "movi     a2, 0\n\t"
 544                               "wsr      a2, icount\n\t"
 545 #if XCHAL_NUM_IBREAK > 0
 546                               "wsr      a2, ibreakenable\n\t"
 547 #endif
 548 #if XCHAL_HAVE_LOOPS
 549                               "wsr      a2, lcount\n\t"
 550 #endif
 551                               "movi     a2, 0x1f\n\t"
 552                               "wsr      a2, ps\n\t"
 553                               "isync\n\t"
 554                               "jx       %0\n\t"
 555                               :
 556                               : "a" (XCHAL_RESET_VECTOR_VADDR)
 557                               : "a2");
 558         for (;;)
 559                 ;
 560 }
 561
 562 void machine_restart(char * cmd)
 563 {
 564         platform_restart();
 565 }
 566
 567 void machine_halt(void)
 568 {
 569         platform_halt();
 570         while (1);
 571 }
 572
 573 void machine_power_off(void)
 574 {
 575         platform_power_off();
 576         while (1);
 577 }
 578 #ifdef CONFIG_PROC_FS
 579
 580 /*
 581  * Display some core information through /proc/cpuinfo.
 582  */
 583
 584 static int
 585 c_show(struct seq_file *f, void *slot)
 586 {
 587         /* high-level stuff */
 588         seq_printf(f, "CPU count\t: %u\n"
 589                       "CPU list\t: %*pbl\n"
 590                       "vendor_id\t: Tensilica\n"
 591                       "model\t\t: Xtensa " XCHAL_HW_VERSION_NAME "\n"
 592                       "core ID\t\t: " XCHAL_CORE_ID "\n"
 593                       "build ID\t: 0x%x\n"
 594                       "config ID\t: %08x:%08x\n"
 595                       "byte order\t: %s\n"
 596                       "cpu MHz\t\t: %lu.%02lu\n"
 597                       "bogomips\t: %lu.%02lu\n",
 598                       num_online_cpus(),
 599                       cpumask_pr_args(cpu_online_mask),
 600                       XCHAL_BUILD_UNIQUE_ID,
 601                       xtensa_get_sr(SREG_EPC), xtensa_get_sr(SREG_EXCSAVE),
 602                       XCHAL_HAVE_BE ?  "big" : "little",
 603                       ccount_freq/1000000,
 604                       (ccount_freq/10000) % 100,
 605                       loops_per_jiffy/(500000/HZ),
 606                       (loops_per_jiffy/(5000/HZ)) % 100);
 607         seq_puts(f, "flags\t\t: "
 608 #if XCHAL_HAVE_NMI
 609                      "nmi "
 610 #endif
 611 #if XCHAL_HAVE_DEBUG
 612                      "debug "
 613 # if XCHAL_HAVE_OCD
 614                      "ocd "
 615 # endif
 616 #endif
 617 #if XCHAL_HAVE_DENSITY
 618                      "density "
 619 #endif
 620 #if XCHAL_HAVE_BOOLEANS
 621                      "boolean "
 622 #endif
 623 #if XCHAL_HAVE_LOOPS
 624                      "loop "
 625 #endif
 626 #if XCHAL_HAVE_NSA
 627                      "nsa "
 628 #endif
 629 #if XCHAL_HAVE_MINMAX
 630                      "minmax "
 631 #endif
 632 #if XCHAL_HAVE_SEXT
 633                      "sext "
 634 #endif
 635 #if XCHAL_HAVE_CLAMPS
 636                      "clamps "
 637 #endif
 638 #if XCHAL_HAVE_MAC16
 639                      "mac16 "
 640 #endif
 641 #if XCHAL_HAVE_MUL16
 642                      "mul16 "
 643 #endif
 644 #if XCHAL_HAVE_MUL32
 645                      "mul32 "
 646 #endif
 647 #if XCHAL_HAVE_MUL32_HIGH
 648                      "mul32h "
 649 #endif
 650 #if XCHAL_HAVE_FP
 651                      "fpu "
 652 #endif
 653 #if XCHAL_HAVE_S32C1I
 654                      "s32c1i "
 655 #endif
 656 #if XCHAL_HAVE_EXCLUSIVE
 657                      "exclusive "
 658 #endif
 659                      "\n");
 660
 661         /* Registers. */
 662         seq_printf(f,"physical aregs\t: %d\n"
 663                      "misc regs\t: %d\n"
 664                      "ibreak\t\t: %d\n"
 665                      "dbreak\t\t: %d\n",
 666                      XCHAL_NUM_AREGS,
 667                      XCHAL_NUM_MISC_REGS,
 668                      XCHAL_NUM_IBREAK,
 669                      XCHAL_NUM_DBREAK);
 670
 671
 672         /* Interrupt. */
 673         seq_printf(f,"num ints\t: %d\n"
 674                      "ext ints\t: %d\n"
 675                      "int levels\t: %d\n"
 676                      "timers\t\t: %d\n"
 677                      "debug level\t: %d\n",
 678                      XCHAL_NUM_INTERRUPTS,
 679                      XCHAL_NUM_EXTINTERRUPTS,
 680                      XCHAL_NUM_INTLEVELS,
 681                      XCHAL_NUM_TIMERS,
 682                      XCHAL_DEBUGLEVEL);
 683
 684         /* Cache */
 685         seq_printf(f,"icache line size: %d\n"
 686                      "icache ways\t: %d\n"
 687                      "icache size\t: %d\n"
 688                      "icache flags\t: "
 689 #if XCHAL_ICACHE_LINE_LOCKABLE
 690                      "lock "
 691 #endif
 692                      "\n"
 693                      "dcache line size: %d\n"
 694                      "dcache ways\t: %d\n"
 695                      "dcache size\t: %d\n"
 696                      "dcache flags\t: "
 697 #if XCHAL_DCACHE_IS_WRITEBACK
 698                      "writeback "
 699 #endif
 700 #if XCHAL_DCACHE_LINE_LOCKABLE
 701                      "lock "
 702 #endif
 703                      "\n",
 704                      XCHAL_ICACHE_LINESIZE,
 705                      XCHAL_ICACHE_WAYS,
 706                      XCHAL_ICACHE_SIZE,
 707                      XCHAL_DCACHE_LINESIZE,
 708                      XCHAL_DCACHE_WAYS,
 709                      XCHAL_DCACHE_SIZE);
 710
 711         return 0;
 712 }
 713
 714 /*
 715  * We show only CPU #0 info.
 716  */
 717 static void *
 718 c_start(struct seq_file *f, loff_t *pos)
 719 {
 720         return (*pos == 0) ? (void *)1 : NULL;
 721 }
 722
 723 static void *
 724 c_next(struct seq_file *f, void *v, loff_t *pos)
 725 {
 726         return NULL;
 727 }
 728
 729 static void
 730 c_stop(struct seq_file *f, void *v)
 731 {
 732 }
 733
 734 const struct seq_operations cpuinfo_op =
 735 {
 736         .start  = c_start,
 737         .next   = c_next,
 738         .stop   = c_stop,
 739         .show   = c_show,
 740 };
 741
 742 #endif /* CONFIG_PROC_FS */