4 * Copyright (C) 2013 Texas Instruments, Inc.
6 * Tero Kristo <t-kristo@ti.com>
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License version 2 as
10 * published by the Free Software Foundation.
12 * This program is distributed "as is" WITHOUT ANY WARRANTY of any
13 * kind, whether express or implied; without even the implied warranty
14 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
18 #include <linux/clk.h>
19 #include <linux/clk-provider.h>
20 #include <linux/clkdev.h>
21 #include <linux/clk/ti.h>
23 #include <linux/of_address.h>
24 #include <linux/list.h>
25 #include <linux/regmap.h>
26 #include <linux/memblock.h>
27 #include <linux/device.h>
32 #define pr_fmt(fmt) "%s: " fmt, __func__
34 struct ti_clk_ll_ops *ti_clk_ll_ops;
35 static struct device_node *clocks_node_ptr[CLK_MAX_MEMMAPS];
37 struct ti_clk_features ti_clk_features;
40 struct regmap *regmap;
44 static struct clk_iomap *clk_memmaps[CLK_MAX_MEMMAPS];
46 static void clk_memmap_writel(u32 val, const struct clk_omap_reg *reg)
48 struct clk_iomap *io = clk_memmaps[reg->index];
51 writel_relaxed(val, reg->ptr);
53 regmap_write(io->regmap, reg->offset, val);
55 writel_relaxed(val, io->mem + reg->offset);
58 static void _clk_rmw(u32 val, u32 mask, void __iomem *ptr)
62 v = readl_relaxed(ptr);
65 writel_relaxed(v, ptr);
68 static void clk_memmap_rmw(u32 val, u32 mask, const struct clk_omap_reg *reg)
70 struct clk_iomap *io = clk_memmaps[reg->index];
73 _clk_rmw(val, mask, reg->ptr);
74 } else if (io->regmap) {
75 regmap_update_bits(io->regmap, reg->offset, mask, val);
77 _clk_rmw(val, mask, io->mem + reg->offset);
81 static u32 clk_memmap_readl(const struct clk_omap_reg *reg)
84 struct clk_iomap *io = clk_memmaps[reg->index];
87 val = readl_relaxed(reg->ptr);
89 regmap_read(io->regmap, reg->offset, &val);
91 val = readl_relaxed(io->mem + reg->offset);
97 * ti_clk_setup_ll_ops - setup low level clock operations
98 * @ops: low level clock ops descriptor
100 * Sets up low level clock operations for TI clock driver. This is used
101 * to provide various callbacks for the clock driver towards platform
102 * specific code. Returns 0 on success, -EBUSY if ll_ops have been
103 * registered already.
105 int ti_clk_setup_ll_ops(struct ti_clk_ll_ops *ops)
108 pr_err("Attempt to register ll_ops multiple times.\n");
113 ops->clk_readl = clk_memmap_readl;
114 ops->clk_writel = clk_memmap_writel;
115 ops->clk_rmw = clk_memmap_rmw;
121 * ti_dt_clocks_register - register DT alias clocks during boot
122 * @oclks: list of clocks to register
124 * Register alias or non-standard DT clock entries during boot. By
125 * default, DT clocks are found based on their node name. If any
126 * additional con-id / dev-id -> clock mapping is required, use this
127 * function to list these.
129 void __init ti_dt_clocks_register(struct ti_dt_clk oclks[])
132 struct device_node *node, *parent;
134 struct of_phandle_args clkspec;
141 static bool clkctrl_nodes_missing;
142 static bool has_clkctrl_data;
143 static bool compat_mode;
145 compat_mode = ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT;
147 for (c = oclks; c->node_name != NULL; c++) {
148 strcpy(buf, c->node_name);
150 for (i = 0; i < 2; i++)
156 pr_warn("Bad number of tags on %s\n",
160 tags[num_args++] = ptr + 1;
166 if (num_args && clkctrl_nodes_missing)
169 node = of_find_node_by_name(NULL, buf);
170 if (num_args && compat_mode) {
172 node = of_get_child_by_name(parent, "clk");
177 clkspec.args_count = num_args;
178 for (i = 0; i < num_args; i++) {
179 ret = kstrtoint(tags[i], i ? 10 : 16, clkspec.args + i);
181 pr_warn("Bad tag in %s at %d: %s\n",
182 c->node_name, i, tags[i]);
187 clk = of_clk_get_from_provider(&clkspec);
193 if (num_args && !has_clkctrl_data) {
194 if (of_find_compatible_node(NULL, NULL,
196 has_clkctrl_data = true;
198 clkctrl_nodes_missing = true;
200 pr_warn("missing clkctrl nodes, please update your dts.\n");
205 pr_warn("failed to lookup clock node %s, ret=%ld\n",
206 c->node_name, PTR_ERR(clk));
211 struct clk_init_item {
212 struct device_node *node;
214 ti_of_clk_init_cb_t func;
215 struct list_head link;
218 static LIST_HEAD(retry_list);
221 * ti_clk_retry_init - retries a failed clock init at later phase
222 * @node: device not for the clock
223 * @user: user data pointer
224 * @func: init function to be called for the clock
226 * Adds a failed clock init to the retry list. The retry list is parsed
227 * once all the other clocks have been initialized.
229 int __init ti_clk_retry_init(struct device_node *node, void *user,
230 ti_of_clk_init_cb_t func)
232 struct clk_init_item *retry;
234 pr_debug("%pOFn: adding to retry list...\n", node);
235 retry = kzalloc(sizeof(*retry), GFP_KERNEL);
242 list_add(&retry->link, &retry_list);
248 * ti_clk_get_reg_addr - get register address for a clock register
249 * @node: device node for the clock
250 * @index: register index from the clock node
251 * @reg: pointer to target register struct
253 * Builds clock register address from device tree information, and returns
254 * the data via the provided output pointer @reg. Returns 0 on success,
255 * negative error value on failure.
257 int ti_clk_get_reg_addr(struct device_node *node, int index,
258 struct clk_omap_reg *reg)
263 for (i = 0; i < CLK_MAX_MEMMAPS; i++) {
264 if (clocks_node_ptr[i] == node->parent)
268 if (i == CLK_MAX_MEMMAPS) {
269 pr_err("clk-provider not found for %pOFn!\n", node);
275 if (of_property_read_u32_index(node, "reg", index, &val)) {
276 pr_err("%pOFn must have reg[%d]!\n", node, index);
286 void ti_clk_latch(struct clk_omap_reg *reg, s8 shift)
295 ti_clk_ll_ops->clk_rmw(latch, latch, reg);
296 ti_clk_ll_ops->clk_rmw(0, latch, reg);
297 ti_clk_ll_ops->clk_readl(reg); /* OCP barrier */
301 * omap2_clk_provider_init - init master clock provider
302 * @parent: master node
303 * @index: internal index for clk_reg_ops
304 * @syscon: syscon regmap pointer for accessing clock registers
305 * @mem: iomem pointer for the clock provider memory area, only used if
306 * syscon is not provided
308 * Initializes a master clock IP block. This basically sets up the
309 * mapping from clocks node to the memory map index. All the clocks
310 * are then initialized through the common of_clk_init call, and the
311 * clocks will access their memory maps based on the node layout.
312 * Returns 0 in success.
314 int __init omap2_clk_provider_init(struct device_node *parent, int index,
315 struct regmap *syscon, void __iomem *mem)
317 struct device_node *clocks;
318 struct clk_iomap *io;
320 /* get clocks for this parent */
321 clocks = of_get_child_by_name(parent, "clocks");
323 pr_err("%pOFn missing 'clocks' child node.\n", parent);
327 /* add clocks node info */
328 clocks_node_ptr[index] = clocks;
330 io = kzalloc(sizeof(*io), GFP_KERNEL);
337 clk_memmaps[index] = io;
343 * omap2_clk_legacy_provider_init - initialize a legacy clock provider
344 * @index: index for the clock provider
345 * @mem: iomem pointer for the clock provider memory area
347 * Initializes a legacy clock provider memory mapping.
349 void __init omap2_clk_legacy_provider_init(int index, void __iomem *mem)
351 struct clk_iomap *io;
353 io = memblock_alloc(sizeof(*io), SMP_CACHE_BYTES);
357 clk_memmaps[index] = io;
361 * ti_dt_clk_init_retry_clks - init clocks from the retry list
363 * Initializes any clocks that have failed to initialize before,
364 * reasons being missing parent node(s) during earlier init. This
365 * typically happens only for DPLLs which need to have both of their
366 * parent clocks ready during init.
368 void ti_dt_clk_init_retry_clks(void)
370 struct clk_init_item *retry;
371 struct clk_init_item *tmp;
374 while (!list_empty(&retry_list) && retries) {
375 list_for_each_entry_safe(retry, tmp, &retry_list, link) {
376 pr_debug("retry-init: %pOFn\n", retry->node);
377 retry->func(retry->user, retry->node);
378 list_del(&retry->link);
385 static const struct of_device_id simple_clk_match_table[] __initconst = {
386 { .compatible = "fixed-clock" },
387 { .compatible = "fixed-factor-clock" },
392 * ti_clk_add_aliases - setup clock aliases
394 * Sets up any missing clock aliases. No return value.
396 void __init ti_clk_add_aliases(void)
398 struct device_node *np;
401 for_each_matching_node(np, simple_clk_match_table) {
402 struct of_phandle_args clkspec;
405 clk = of_clk_get_from_provider(&clkspec);
407 ti_clk_add_alias(NULL, clk, np->name);
412 * ti_clk_setup_features - setup clock features flags
413 * @features: features definition to use
415 * Initializes the clock driver features flags based on platform
416 * provided data. No return value.
418 void __init ti_clk_setup_features(struct ti_clk_features *features)
420 memcpy(&ti_clk_features, features, sizeof(*features));
424 * ti_clk_get_features - get clock driver features flags
426 * Get TI clock driver features description. Returns a pointer
427 * to the current feature setup.
429 const struct ti_clk_features *ti_clk_get_features(void)
431 return &ti_clk_features;
435 * omap2_clk_enable_init_clocks - prepare & enable a list of clocks
436 * @clk_names: ptr to an array of strings of clock names to enable
437 * @num_clocks: number of clock names in @clk_names
439 * Prepare and enable a list of clocks, named by @clk_names. No
440 * return value. XXX Deprecated; only needed until these clocks are
441 * properly claimed and enabled by the drivers or core code that uses
442 * them. XXX What code disables & calls clk_put on these clocks?
444 void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks)
446 struct clk *init_clk;
449 for (i = 0; i < num_clocks; i++) {
450 init_clk = clk_get(NULL, clk_names[i]);
451 if (WARN(IS_ERR(init_clk), "could not find init clock %s\n",
454 clk_prepare_enable(init_clk);
459 * ti_clk_add_alias - add a clock alias for a TI clock
460 * @dev: device alias for this clock
461 * @clk: clock handle to create alias for
462 * @con: connection ID for this clock
464 * Creates a clock alias for a TI clock. Allocates the clock lookup entry
465 * and assigns the data to it. Returns 0 if successful, negative error
468 int ti_clk_add_alias(struct device *dev, struct clk *clk, const char *con)
470 struct clk_lookup *cl;
478 cl = kzalloc(sizeof(*cl), GFP_KERNEL);
483 cl->dev_id = dev_name(dev);
493 * ti_clk_register - register a TI clock to the common clock framework
494 * @dev: device for this clock
495 * @hw: hardware clock handle
496 * @con: connection ID for this clock
498 * Registers a TI clock to the common clock framework, and adds a clock
499 * alias for it. Returns a handle to the registered clock if successful,
500 * ERR_PTR value in failure.
502 struct clk *ti_clk_register(struct device *dev, struct clk_hw *hw,
508 clk = clk_register(dev, hw);
512 ret = ti_clk_add_alias(dev, clk, con);