drivers/cpufreq/pmac64-cpufreq.c

   1 /*
   2  *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
   3  *  and                       Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
   4  *
   5  * This program is free software; you can redistribute it and/or modify
   6  * it under the terms of the GNU General Public License version 2 as
   7  * published by the Free Software Foundation.
   8  *
   9  * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
  10  * that is iMac G5 and latest single CPU desktop.
  11  */
  12
  13 #undef DEBUG
  14
  15 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
  16
  17 #include <linux/module.h>
  18 #include <linux/types.h>
  19 #include <linux/errno.h>
  20 #include <linux/kernel.h>
  21 #include <linux/delay.h>
  22 #include <linux/sched.h>
  23 #include <linux/cpufreq.h>
  24 #include <linux/init.h>
  25 #include <linux/completion.h>
  26 #include <linux/mutex.h>
  27 #include <linux/of_device.h>
  28 #include <asm/prom.h>
  29 #include <asm/machdep.h>
  30 #include <asm/irq.h>
  31 #include <asm/sections.h>
  32 #include <asm/cputable.h>
  33 #include <asm/time.h>
  34 #include <asm/smu.h>
  35 #include <asm/pmac_pfunc.h>
  36
  37 #define DBG(fmt...) pr_debug(fmt)
  38
  39 /* see 970FX user manual */
  40
  41 #define SCOM_PCR 0x0aa001                       /* PCR scom addr */
  42
  43 #define PCR_HILO_SELECT         0x80000000U     /* 1 = PCR, 0 = PCRH */
  44 #define PCR_SPEED_FULL          0x00000000U     /* 1:1 speed value */
  45 #define PCR_SPEED_HALF          0x00020000U     /* 1:2 speed value */
  46 #define PCR_SPEED_QUARTER       0x00040000U     /* 1:4 speed value */
  47 #define PCR_SPEED_MASK          0x000e0000U     /* speed mask */
  48 #define PCR_SPEED_SHIFT         17
  49 #define PCR_FREQ_REQ_VALID      0x00010000U     /* freq request valid */
  50 #define PCR_VOLT_REQ_VALID      0x00008000U     /* volt request valid */
  51 #define PCR_TARGET_TIME_MASK    0x00006000U     /* target time */
  52 #define PCR_STATLAT_MASK        0x00001f00U     /* STATLAT value */
  53 #define PCR_SNOOPLAT_MASK       0x000000f0U     /* SNOOPLAT value */
  54 #define PCR_SNOOPACC_MASK       0x0000000fU     /* SNOOPACC value */
  55
  56 #define SCOM_PSR 0x408001                       /* PSR scom addr */
  57 /* warning: PSR is a 64 bits register */
  58 #define PSR_CMD_RECEIVED        0x2000000000000000U   /* command received */
  59 #define PSR_CMD_COMPLETED       0x1000000000000000U   /* command completed */
  60 #define PSR_CUR_SPEED_MASK      0x0300000000000000U   /* current speed */
  61 #define PSR_CUR_SPEED_SHIFT     (56)
  62
  63 /*
  64  * The G5 only supports two frequencies (Quarter speed is not supported)
  65  */
  66 #define CPUFREQ_HIGH                  0
  67 #define CPUFREQ_LOW                   1
  68
  69 static struct cpufreq_frequency_table g5_cpu_freqs[] = {
  70         {0, CPUFREQ_HIGH,       0},
  71         {0, CPUFREQ_LOW,        0},
  72         {0, 0,                  CPUFREQ_TABLE_END},
  73 };
  74
  75 /* Power mode data is an array of the 32 bits PCR values to use for
  76  * the various frequencies, retrieved from the device-tree
  77  */
  78 static int g5_pmode_cur;
  79
  80 static void (*g5_switch_volt)(int speed_mode);
  81 static int (*g5_switch_freq)(int speed_mode);
  82 static int (*g5_query_freq)(void);
  83
  84 static unsigned long transition_latency;
  85
  86 #ifdef CONFIG_PMAC_SMU
  87
  88 static const u32 *g5_pmode_data;
  89 static int g5_pmode_max;
  90
  91 static struct smu_sdbp_fvt *g5_fvt_table;       /* table of op. points */
  92 static int g5_fvt_count;                        /* number of op. points */
  93 static int g5_fvt_cur;                          /* current op. point */
  94
  95 /*
  96  * SMU based voltage switching for Neo2 platforms
  97  */
  98
  99 static void g5_smu_switch_volt(int speed_mode)
 100 {
 101         struct smu_simple_cmd   cmd;
 102
 103         DECLARE_COMPLETION_ONSTACK(comp);
 104         smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete,
 105                          &comp, 'V', 'S', 'L', 'E', 'W',
 106                          0xff, g5_fvt_cur+1, speed_mode);
 107         wait_for_completion(&comp);
 108 }
 109
 110 /*
 111  * Platform function based voltage/vdnap switching for Neo2
 112  */
 113
 114 static struct pmf_function *pfunc_set_vdnap0;
 115 static struct pmf_function *pfunc_vdnap0_complete;
 116
 117 static void g5_vdnap_switch_volt(int speed_mode)
 118 {
 119         struct pmf_args args;
 120         u32 slew, done = 0;
 121         unsigned long timeout;
 122
 123         slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0;
 124         args.count = 1;
 125         args.u[0].p = &slew;
 126
 127         pmf_call_one(pfunc_set_vdnap0, &args);
 128
 129         /* It's an irq GPIO so we should be able to just block here,
 130          * I'll do that later after I've properly tested the IRQ code for
 131          * platform functions
 132          */
 133         timeout = jiffies + HZ/10;
 134         while(!time_after(jiffies, timeout)) {
 135                 args.count = 1;
 136                 args.u[0].p = &done;
 137                 pmf_call_one(pfunc_vdnap0_complete, &args);
 138                 if (done)
 139                         break;
 140                 usleep_range(1000, 1000);
 141         }
 142         if (done == 0)
 143                 pr_warn("Timeout in clock slewing !\n");
 144 }
 145
 146
 147 /*
 148  * SCOM based frequency switching for 970FX rev3
 149  */
 150 static int g5_scom_switch_freq(int speed_mode)
 151 {
 152         unsigned long flags;
 153         int to;
 154
 155         /* If frequency is going up, first ramp up the voltage */
 156         if (speed_mode < g5_pmode_cur)
 157                 g5_switch_volt(speed_mode);
 158
 159         local_irq_save(flags);
 160
 161         /* Clear PCR high */
 162         scom970_write(SCOM_PCR, 0);
 163         /* Clear PCR low */
 164         scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
 165         /* Set PCR low */
 166         scom970_write(SCOM_PCR, PCR_HILO_SELECT |
 167                       g5_pmode_data[speed_mode]);
 168
 169         /* Wait for completion */
 170         for (to = 0; to < 10; to++) {
 171                 unsigned long psr = scom970_read(SCOM_PSR);
 172
 173                 if ((psr & PSR_CMD_RECEIVED) == 0 &&
 174                     (((psr >> PSR_CUR_SPEED_SHIFT) ^
 175                       (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
 176                     == 0)
 177                         break;
 178                 if (psr & PSR_CMD_COMPLETED)
 179                         break;
 180                 udelay(100);
 181         }
 182
 183         local_irq_restore(flags);
 184
 185         /* If frequency is going down, last ramp the voltage */
 186         if (speed_mode > g5_pmode_cur)
 187                 g5_switch_volt(speed_mode);
 188
 189         g5_pmode_cur = speed_mode;
 190         ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
 191
 192         return 0;
 193 }
 194
 195 static int g5_scom_query_freq(void)
 196 {
 197         unsigned long psr = scom970_read(SCOM_PSR);
 198         int i;
 199
 200         for (i = 0; i <= g5_pmode_max; i++)
 201                 if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
 202                       (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
 203                         break;
 204         return i;
 205 }
 206
 207 /*
 208  * Fake voltage switching for platforms with missing support
 209  */
 210
 211 static void g5_dummy_switch_volt(int speed_mode)
 212 {
 213 }
 214
 215 #endif /* CONFIG_PMAC_SMU */
 216
 217 /*
 218  * Platform function based voltage switching for PowerMac7,2 & 7,3
 219  */
 220
 221 static struct pmf_function *pfunc_cpu0_volt_high;
 222 static struct pmf_function *pfunc_cpu0_volt_low;
 223 static struct pmf_function *pfunc_cpu1_volt_high;
 224 static struct pmf_function *pfunc_cpu1_volt_low;
 225
 226 static void g5_pfunc_switch_volt(int speed_mode)
 227 {
 228         if (speed_mode == CPUFREQ_HIGH) {
 229                 if (pfunc_cpu0_volt_high)
 230                         pmf_call_one(pfunc_cpu0_volt_high, NULL);
 231                 if (pfunc_cpu1_volt_high)
 232                         pmf_call_one(pfunc_cpu1_volt_high, NULL);
 233         } else {
 234                 if (pfunc_cpu0_volt_low)
 235                         pmf_call_one(pfunc_cpu0_volt_low, NULL);
 236                 if (pfunc_cpu1_volt_low)
 237                         pmf_call_one(pfunc_cpu1_volt_low, NULL);
 238         }
 239         usleep_range(10000, 10000); /* should be faster , to fix */
 240 }
 241
 242 /*
 243  * Platform function based frequency switching for PowerMac7,2 & 7,3
 244  */
 245
 246 static struct pmf_function *pfunc_cpu_setfreq_high;
 247 static struct pmf_function *pfunc_cpu_setfreq_low;
 248 static struct pmf_function *pfunc_cpu_getfreq;
 249 static struct pmf_function *pfunc_slewing_done;
 250
 251 static int g5_pfunc_switch_freq(int speed_mode)
 252 {
 253         struct pmf_args args;
 254         u32 done = 0;
 255         unsigned long timeout;
 256         int rc;
 257
 258         DBG("g5_pfunc_switch_freq(%d)\n", speed_mode);
 259
 260         /* If frequency is going up, first ramp up the voltage */
 261         if (speed_mode < g5_pmode_cur)
 262                 g5_switch_volt(speed_mode);
 263
 264         /* Do it */
 265         if (speed_mode == CPUFREQ_HIGH)
 266                 rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL);
 267         else
 268                 rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
 269
 270         if (rc)
 271                 pr_warn("pfunc switch error %d\n", rc);
 272
 273         /* It's an irq GPIO so we should be able to just block here,
 274          * I'll do that later after I've properly tested the IRQ code for
 275          * platform functions
 276          */
 277         timeout = jiffies + HZ/10;
 278         while(!time_after(jiffies, timeout)) {
 279                 args.count = 1;
 280                 args.u[0].p = &done;
 281                 pmf_call_one(pfunc_slewing_done, &args);
 282                 if (done)
 283                         break;
 284                 usleep_range(500, 500);
 285         }
 286         if (done == 0)
 287                 pr_warn("Timeout in clock slewing !\n");
 288
 289         /* If frequency is going down, last ramp the voltage */
 290         if (speed_mode > g5_pmode_cur)
 291                 g5_switch_volt(speed_mode);
 292
 293         g5_pmode_cur = speed_mode;
 294         ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
 295
 296         return 0;
 297 }
 298
 299 static int g5_pfunc_query_freq(void)
 300 {
 301         struct pmf_args args;
 302         u32 val = 0;
 303
 304         args.count = 1;
 305         args.u[0].p = &val;
 306         pmf_call_one(pfunc_cpu_getfreq, &args);
 307         return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
 308 }
 309
 310
 311 /*
 312  * Common interface to the cpufreq core
 313  */
 314
 315 static int g5_cpufreq_target(struct cpufreq_policy *policy, unsigned int index)
 316 {
 317         return g5_switch_freq(index);
 318 }
 319
 320 static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
 321 {
 322         return g5_cpu_freqs[g5_pmode_cur].frequency;
 323 }
 324
 325 static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
 326 {
 327         return cpufreq_generic_init(policy, g5_cpu_freqs, transition_latency);
 328 }
 329
 330 static struct cpufreq_driver g5_cpufreq_driver = {
 331         .name           = "powermac",
 332         .flags          = CPUFREQ_CONST_LOOPS,
 333         .init           = g5_cpufreq_cpu_init,
 334         .verify         = cpufreq_generic_frequency_table_verify,
 335         .target_index   = g5_cpufreq_target,
 336         .get            = g5_cpufreq_get_speed,
 337         .attr           = cpufreq_generic_attr,
 338 };
 339
 340
 341 #ifdef CONFIG_PMAC_SMU
 342
 343 static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
 344 {
 345         unsigned int psize, ssize;
 346         unsigned long max_freq;
 347         char *freq_method, *volt_method;
 348         const u32 *valp;
 349         u32 pvr_hi;
 350         int use_volts_vdnap = 0;
 351         int use_volts_smu = 0;
 352         int rc = -ENODEV;
 353
 354         /* Check supported platforms */
 355         if (of_machine_is_compatible("PowerMac8,1") ||
 356             of_machine_is_compatible("PowerMac8,2") ||
 357             of_machine_is_compatible("PowerMac9,1") ||
 358             of_machine_is_compatible("PowerMac12,1"))
 359                 use_volts_smu = 1;
 360         else if (of_machine_is_compatible("PowerMac11,2"))
 361                 use_volts_vdnap = 1;
 362         else
 363                 return -ENODEV;
 364
 365         /* Check 970FX for now */
 366         valp = of_get_property(cpunode, "cpu-version", NULL);
 367         if (!valp) {
 368                 DBG("No cpu-version property !\n");
 369                 goto bail_noprops;
 370         }
 371         pvr_hi = (*valp) >> 16;
 372         if (pvr_hi != 0x3c && pvr_hi != 0x44) {
 373                 pr_err("Unsupported CPU version\n");
 374                 goto bail_noprops;
 375         }
 376
 377         /* Look for the powertune data in the device-tree */
 378         g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize);
 379         if (!g5_pmode_data) {
 380                 DBG("No power-mode-data !\n");
 381                 goto bail_noprops;
 382         }
 383         g5_pmode_max = psize / sizeof(u32) - 1;
 384
 385         if (use_volts_smu) {
 386                 const struct smu_sdbp_header *shdr;
 387
 388                 /* Look for the FVT table */
 389                 shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
 390                 if (!shdr)
 391                         goto bail_noprops;
 392                 g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
 393                 ssize = (shdr->len * sizeof(u32)) - sizeof(*shdr);
 394                 g5_fvt_count = ssize / sizeof(*g5_fvt_table);
 395                 g5_fvt_cur = 0;
 396
 397                 /* Sanity checking */
 398                 if (g5_fvt_count < 1 || g5_pmode_max < 1)
 399                         goto bail_noprops;
 400
 401                 g5_switch_volt = g5_smu_switch_volt;
 402                 volt_method = "SMU";
 403         } else if (use_volts_vdnap) {
 404                 struct device_node *root;
 405
 406                 root = of_find_node_by_path("/");
 407                 if (root == NULL) {
 408                         pr_err("Can't find root of device tree\n");
 409                         goto bail_noprops;
 410                 }
 411                 pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
 412                 pfunc_vdnap0_complete =
 413                         pmf_find_function(root, "slewing-done");
 414                 of_node_put(root);
 415                 if (pfunc_set_vdnap0 == NULL ||
 416                     pfunc_vdnap0_complete == NULL) {
 417                         pr_err("Can't find required platform function\n");
 418                         goto bail_noprops;
 419                 }
 420
 421                 g5_switch_volt = g5_vdnap_switch_volt;
 422                 volt_method = "GPIO";
 423         } else {
 424                 g5_switch_volt = g5_dummy_switch_volt;
 425                 volt_method = "none";
 426         }
 427
 428         /*
 429          * From what I see, clock-frequency is always the maximal frequency.
 430          * The current driver can not slew sysclk yet, so we really only deal
 431          * with powertune steps for now. We also only implement full freq and
 432          * half freq in this version. So far, I haven't yet seen a machine
 433          * supporting anything else.
 434          */
 435         valp = of_get_property(cpunode, "clock-frequency", NULL);
 436         if (!valp)
 437                 return -ENODEV;
 438         max_freq = (*valp)/1000;
 439         g5_cpu_freqs[0].frequency = max_freq;
 440         g5_cpu_freqs[1].frequency = max_freq/2;
 441
 442         /* Set callbacks */
 443         transition_latency = 12000;
 444         g5_switch_freq = g5_scom_switch_freq;
 445         g5_query_freq = g5_scom_query_freq;
 446         freq_method = "SCOM";
 447
 448         /* Force apply current frequency to make sure everything is in
 449          * sync (voltage is right for example). Firmware may leave us with
 450          * a strange setting ...
 451          */
 452         g5_switch_volt(CPUFREQ_HIGH);
 453         msleep(10);
 454         g5_pmode_cur = -1;
 455         g5_switch_freq(g5_query_freq());
 456
 457         pr_info("Registering G5 CPU frequency driver\n");
 458         pr_info("Frequency method: %s, Voltage method: %s\n",
 459                 freq_method, volt_method);
 460         pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
 461                 g5_cpu_freqs[1].frequency/1000,
 462                 g5_cpu_freqs[0].frequency/1000,
 463                 g5_cpu_freqs[g5_pmode_cur].frequency/1000);
 464
 465         rc = cpufreq_register_driver(&g5_cpufreq_driver);
 466
 467         /* We keep the CPU node on hold... hopefully, Apple G5 don't have
 468          * hotplug CPU with a dynamic device-tree ...
 469          */
 470         return rc;
 471
 472  bail_noprops:
 473         of_node_put(cpunode);
 474
 475         return rc;
 476 }
 477
 478 #endif /* CONFIG_PMAC_SMU */
 479
 480
 481 static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
 482 {
 483         struct device_node *cpuid = NULL, *hwclock = NULL;
 484         const u8 *eeprom = NULL;
 485         const u32 *valp;
 486         u64 max_freq, min_freq, ih, il;
 487         int has_volt = 1, rc = 0;
 488
 489         DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
 490             " RackMac3,1...\n");
 491
 492         /* Lookup the cpuid eeprom node */
 493         cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
 494         if (cpuid != NULL)
 495                 eeprom = of_get_property(cpuid, "cpuid", NULL);
 496         if (eeprom == NULL) {
 497                 pr_err("Can't find cpuid EEPROM !\n");
 498                 rc = -ENODEV;
 499                 goto bail;
 500         }
 501
 502         /* Lookup the i2c hwclock */
 503         for_each_node_by_name(hwclock, "i2c-hwclock") {
 504                 const char *loc = of_get_property(hwclock,
 505                                 "hwctrl-location", NULL);
 506                 if (loc == NULL)
 507                         continue;
 508                 if (strcmp(loc, "CPU CLOCK"))
 509                         continue;
 510                 if (!of_get_property(hwclock, "platform-get-frequency", NULL))
 511                         continue;
 512                 break;
 513         }
 514         if (hwclock == NULL) {
 515                 pr_err("Can't find i2c clock chip !\n");
 516                 rc = -ENODEV;
 517                 goto bail;
 518         }
 519
 520         DBG("cpufreq: i2c clock chip found: %pOF\n", hwclock);
 521
 522         /* Now get all the platform functions */
 523         pfunc_cpu_getfreq =
 524                 pmf_find_function(hwclock, "get-frequency");
 525         pfunc_cpu_setfreq_high =
 526                 pmf_find_function(hwclock, "set-frequency-high");
 527         pfunc_cpu_setfreq_low =
 528                 pmf_find_function(hwclock, "set-frequency-low");
 529         pfunc_slewing_done =
 530                 pmf_find_function(hwclock, "slewing-done");
 531         pfunc_cpu0_volt_high =
 532                 pmf_find_function(hwclock, "set-voltage-high-0");
 533         pfunc_cpu0_volt_low =
 534                 pmf_find_function(hwclock, "set-voltage-low-0");
 535         pfunc_cpu1_volt_high =
 536                 pmf_find_function(hwclock, "set-voltage-high-1");
 537         pfunc_cpu1_volt_low =
 538                 pmf_find_function(hwclock, "set-voltage-low-1");
 539
 540         /* Check we have minimum requirements */
 541         if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
 542             pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
 543                 pr_err("Can't find platform functions !\n");
 544                 rc = -ENODEV;
 545                 goto bail;
 546         }
 547
 548         /* Check that we have complete sets */
 549         if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) {
 550                 pmf_put_function(pfunc_cpu0_volt_high);
 551                 pmf_put_function(pfunc_cpu0_volt_low);
 552                 pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL;
 553                 has_volt = 0;
 554         }
 555         if (!has_volt ||
 556             pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) {
 557                 pmf_put_function(pfunc_cpu1_volt_high);
 558                 pmf_put_function(pfunc_cpu1_volt_low);
 559                 pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL;
 560         }
 561
 562         /* Note: The device tree also contains a "platform-set-values"
 563          * function for which I haven't quite figured out the usage. It
 564          * might have to be called on init and/or wakeup, I'm not too sure
 565          * but things seem to work fine without it so far ...
 566          */
 567
 568         /* Get max frequency from device-tree */
 569         valp = of_get_property(cpunode, "clock-frequency", NULL);
 570         if (!valp) {
 571                 pr_err("Can't find CPU frequency !\n");
 572                 rc = -ENODEV;
 573                 goto bail;
 574         }
 575
 576         max_freq = (*valp)/1000;
 577
 578         /* Now calculate reduced frequency by using the cpuid input freq
 579          * ratio. This requires 64 bits math unless we are willing to lose
 580          * some precision
 581          */
 582         ih = *((u32 *)(eeprom + 0x10));
 583         il = *((u32 *)(eeprom + 0x20));
 584
 585         /* Check for machines with no useful settings */
 586         if (il == ih) {
 587                 pr_warn("No low frequency mode available on this model !\n");
 588                 rc = -ENODEV;
 589                 goto bail;
 590         }
 591
 592         min_freq = 0;
 593         if (ih != 0 && il != 0)
 594                 min_freq = (max_freq * il) / ih;
 595
 596         /* Sanity check */
 597         if (min_freq >= max_freq || min_freq < 1000) {
 598                 pr_err("Can't calculate low frequency !\n");
 599                 rc = -ENXIO;
 600                 goto bail;
 601         }
 602         g5_cpu_freqs[0].frequency = max_freq;
 603         g5_cpu_freqs[1].frequency = min_freq;
 604
 605         /* Based on a measurement on Xserve G5, rounded up. */
 606         transition_latency = 10 * NSEC_PER_MSEC;
 607
 608         /* Set callbacks */
 609         g5_switch_volt = g5_pfunc_switch_volt;
 610         g5_switch_freq = g5_pfunc_switch_freq;
 611         g5_query_freq = g5_pfunc_query_freq;
 612
 613         /* Force apply current frequency to make sure everything is in
 614          * sync (voltage is right for example). Firmware may leave us with
 615          * a strange setting ...
 616          */
 617         g5_switch_volt(CPUFREQ_HIGH);
 618         msleep(10);
 619         g5_pmode_cur = -1;
 620         g5_switch_freq(g5_query_freq());
 621
 622         pr_info("Registering G5 CPU frequency driver\n");
 623         pr_info("Frequency method: i2c/pfunc, Voltage method: %s\n",
 624                 has_volt ? "i2c/pfunc" : "none");
 625         pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
 626                 g5_cpu_freqs[1].frequency/1000,
 627                 g5_cpu_freqs[0].frequency/1000,
 628                 g5_cpu_freqs[g5_pmode_cur].frequency/1000);
 629
 630         rc = cpufreq_register_driver(&g5_cpufreq_driver);
 631  bail:
 632         if (rc != 0) {
 633                 pmf_put_function(pfunc_cpu_getfreq);
 634                 pmf_put_function(pfunc_cpu_setfreq_high);
 635                 pmf_put_function(pfunc_cpu_setfreq_low);
 636                 pmf_put_function(pfunc_slewing_done);
 637                 pmf_put_function(pfunc_cpu0_volt_high);
 638                 pmf_put_function(pfunc_cpu0_volt_low);
 639                 pmf_put_function(pfunc_cpu1_volt_high);
 640                 pmf_put_function(pfunc_cpu1_volt_low);
 641         }
 642         of_node_put(hwclock);
 643         of_node_put(cpuid);
 644         of_node_put(cpunode);
 645
 646         return rc;
 647 }
 648
 649 static int __init g5_cpufreq_init(void)
 650 {
 651         struct device_node *cpunode;
 652         int rc = 0;
 653
 654         /* Get first CPU node */
 655         cpunode = of_cpu_device_node_get(0);
 656         if (cpunode == NULL) {
 657                 pr_err("Can't find any CPU node\n");
 658                 return -ENODEV;
 659         }
 660
 661         if (of_machine_is_compatible("PowerMac7,2") ||
 662             of_machine_is_compatible("PowerMac7,3") ||
 663             of_machine_is_compatible("RackMac3,1"))
 664                 rc = g5_pm72_cpufreq_init(cpunode);
 665 #ifdef CONFIG_PMAC_SMU
 666         else
 667                 rc = g5_neo2_cpufreq_init(cpunode);
 668 #endif /* CONFIG_PMAC_SMU */
 669
 670         return rc;
 671 }
 672
 673 module_init(g5_cpufreq_init);
 674
 675
 676 MODULE_LICENSE("GPL");