2 # Drm device configuration
4 # This driver provides support for the
5 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
8 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
9 depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
10 select DRM_PANEL_ORIENTATION_QUIRKS
15 select DMA_SHARED_BUFFER
18 Kernel-level support for the Direct Rendering Infrastructure (DRI)
19 introduced in XFree86 4.0. If you say Y here, you need to select
20 the module that's right for your graphics card from the list below.
21 These modules provide support for synchronization, security, and
22 DMA transfers. Please see <http://dri.sourceforge.net/> for more
23 details. You should also select and configure AGP
24 (/dev/agpgart) support if it is available for your platform.
30 config DRM_DP_AUX_CHARDEV
31 bool "DRM DP AUX Interface"
34 Choose this option to enable a /dev/drm_dp_auxN node that allows to
35 read and write values to arbitrary DPCD registers on the DP aux
39 bool "Insert extra checks and debug info into the DRM range managers"
42 depends on STACKTRACE_SUPPORT
45 Enable allocation tracking of memory manager and leak detection on
48 Recommended for driver developers only.
52 config DRM_DEBUG_SELFTEST
53 tristate "kselftests for DRM"
55 depends on DEBUG_KERNEL
61 This option provides kernel modules that can be used to run
62 various selftests on parts of the DRM api. This option is not
63 useful for distributions or general kernels, but only for kernel
64 developers working on DRM and associated drivers.
72 CRTC helpers for KMS drivers.
74 config DRM_KMS_FB_HELPER
76 depends on DRM_KMS_HELPER
78 select FRAMEBUFFER_CONSOLE if !EXPERT
79 select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
81 select FB_SYS_FILLRECT
82 select FB_SYS_COPYAREA
83 select FB_SYS_IMAGEBLIT
84 select FB_CFB_FILLRECT
85 select FB_CFB_COPYAREA
86 select FB_CFB_IMAGEBLIT
89 FBDEV helpers for KMS drivers.
91 config DRM_FBDEV_EMULATION
92 bool "Enable legacy fbdev support for your modesetting driver"
95 select DRM_KMS_FB_HELPER
98 Choose this option if you have a need for the legacy fbdev
99 support. Note that this support also provides the linux console
100 support on top of your modesetting driver.
102 If in doubt, say "Y".
104 config DRM_FBDEV_OVERALLOC
105 int "Overallocation of the fbdev buffer"
106 depends on DRM_FBDEV_EMULATION
109 Defines the fbdev buffer overallocation in percent. Default
110 is 100. Typical values for double buffering will be 200,
111 triple buffering 300.
113 config DRM_FBDEV_LEAK_PHYS_SMEM
114 bool "Shamelessly allow leaking of fbdev physical address (DANGEROUS)"
115 depends on DRM_FBDEV_EMULATION && EXPERT
118 In order to keep user-space compatibility, we want in certain
119 use-cases to keep leaking the fbdev physical address to the
120 user-space program handling the fbdev buffer.
121 This affects, not only, Amlogic, Allwinner or Rockchip devices
122 with ARM Mali GPUs using an userspace Blob.
123 This option is not supported by upstream developers and should be
124 removed as soon as possible and be considered as a broken and
125 legacy behaviour from a modern fbdev device driver.
127 Please send any bug reports when using this to your proprietary
128 software vendor that requires this.
130 If in doubt, say "N" or spread the word to your closed source
133 config DRM_LOAD_EDID_FIRMWARE
134 bool "Allow to specify an EDID data set instead of probing for it"
137 Say Y here, if you want to use EDID data to be loaded from the
138 /lib/firmware directory or one of the provided built-in
139 data sets. This may be necessary, if the graphics adapter or
140 monitor are unable to provide appropriate EDID data. Since this
141 feature is provided as a workaround for broken hardware, the
142 default case is N. Details and instructions how to build your own
143 EDID data are given in Documentation/EDID/HOWTO.txt.
146 bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
149 Choose this option if you want to enable HDMI CEC support for
150 DisplayPort/USB-C to HDMI adapters.
152 Note: not all adapters support this feature, and even for those
153 that do support this they often do not hook up the CEC pin.
157 depends on DRM && MMU
159 GPU memory management subsystem for devices with multiple
160 GPU memory types. Will be enabled automatically if a device driver
163 config DRM_GEM_CMA_HELPER
167 Choose this if you need the GEM CMA helper functions
169 config DRM_KMS_CMA_HELPER
172 select DRM_GEM_CMA_HELPER
174 Choose this if you need the KMS CMA helper functions
176 config DRM_GEM_SHMEM_HELPER
180 Choose this if you need the GEM shmem helper functions
184 depends on DRM && MMU
190 source "drivers/gpu/drm/i2c/Kconfig"
192 source "drivers/gpu/drm/arm/Kconfig"
195 tristate "ATI Radeon"
196 depends on DRM && PCI && MMU
198 select DRM_KMS_HELPER
202 select BACKLIGHT_CLASS_DEVICE
203 select BACKLIGHT_LCD_SUPPORT
206 Choose this option if you have an ATI Radeon graphics card. There
207 are both PCI and AGP versions. You don't need to choose this to
208 run the Radeon in plain VGA mode.
210 If M is selected, the module will be called radeon.
212 source "drivers/gpu/drm/radeon/Kconfig"
216 depends on DRM && PCI && MMU
218 select DRM_KMS_HELPER
223 select BACKLIGHT_CLASS_DEVICE
224 select BACKLIGHT_LCD_SUPPORT
228 Choose this option if you have a recent AMD Radeon graphics card.
230 If M is selected, the module will be called amdgpu.
232 source "drivers/gpu/drm/amd/amdgpu/Kconfig"
234 source "drivers/gpu/drm/nouveau/Kconfig"
236 source "drivers/gpu/drm/i915/Kconfig"
239 tristate "Virtual GEM provider"
242 Choose this option to get a virtual graphics memory manager,
243 as used by Mesa's software renderer for enhanced performance.
244 If M is selected the module will be called vgem.
247 tristate "Virtual KMS (EXPERIMENTAL)"
249 select DRM_KMS_HELPER
252 Virtual Kernel Mode-Setting (VKMS) is used for testing or for
253 running GPU in a headless machines. Choose this option to get
256 If M is selected the module will be called vkms.
258 config DRM_ATI_PCIGART
261 source "drivers/gpu/drm/exynos/Kconfig"
263 source "drivers/gpu/drm/rockchip/Kconfig"
265 source "drivers/gpu/drm/vmwgfx/Kconfig"
267 source "drivers/gpu/drm/gma500/Kconfig"
269 source "drivers/gpu/drm/udl/Kconfig"
271 source "drivers/gpu/drm/ast/Kconfig"
273 source "drivers/gpu/drm/mgag200/Kconfig"
275 source "drivers/gpu/drm/cirrus/Kconfig"
277 source "drivers/gpu/drm/armada/Kconfig"
279 source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
281 source "drivers/gpu/drm/rcar-du/Kconfig"
283 source "drivers/gpu/drm/shmobile/Kconfig"
285 source "drivers/gpu/drm/sun4i/Kconfig"
287 source "drivers/gpu/drm/omapdrm/Kconfig"
289 source "drivers/gpu/drm/tilcdc/Kconfig"
291 source "drivers/gpu/drm/qxl/Kconfig"
293 source "drivers/gpu/drm/bochs/Kconfig"
295 source "drivers/gpu/drm/virtio/Kconfig"
297 source "drivers/gpu/drm/msm/Kconfig"
299 source "drivers/gpu/drm/fsl-dcu/Kconfig"
301 source "drivers/gpu/drm/tegra/Kconfig"
303 source "drivers/gpu/drm/stm/Kconfig"
305 source "drivers/gpu/drm/panel/Kconfig"
307 source "drivers/gpu/drm/bridge/Kconfig"
309 source "drivers/gpu/drm/sti/Kconfig"
311 source "drivers/gpu/drm/imx/Kconfig"
313 source "drivers/gpu/drm/v3d/Kconfig"
315 source "drivers/gpu/drm/vc4/Kconfig"
317 source "drivers/gpu/drm/etnaviv/Kconfig"
319 source "drivers/gpu/drm/arc/Kconfig"
321 source "drivers/gpu/drm/hisilicon/Kconfig"
323 source "drivers/gpu/drm/mediatek/Kconfig"
325 source "drivers/gpu/drm/zte/Kconfig"
327 source "drivers/gpu/drm/mxsfb/Kconfig"
329 source "drivers/gpu/drm/meson/Kconfig"
331 source "drivers/gpu/drm/tinydrm/Kconfig"
333 source "drivers/gpu/drm/pl111/Kconfig"
335 source "drivers/gpu/drm/tve200/Kconfig"
337 source "drivers/gpu/drm/xen/Kconfig"
339 source "drivers/gpu/drm/vboxvideo/Kconfig"
341 source "drivers/gpu/drm/lima/Kconfig"
343 source "drivers/gpu/drm/panfrost/Kconfig"
345 source "drivers/gpu/drm/aspeed/Kconfig"
347 # Keep legacy drivers last
349 menuconfig DRM_LEGACY
350 bool "Enable legacy drivers (DANGEROUS)"
351 depends on DRM && MMU
353 select DRM_ATI_PCIGART if PCI
355 Enable legacy DRI1 drivers. Those drivers expose unsafe and dangerous
356 APIs to user-space, which can be used to circumvent access
357 restrictions and other security measures. For backwards compatibility
358 those drivers are still available, but their use is highly
359 inadvisable and might harm your system.
361 You are recommended to use the safe modeset-only drivers instead, and
362 perform 3D emulation in user-space.
364 Unless you have strong reasons to go rogue, say "N".
369 tristate "3dfx Banshee/Voodoo3+"
370 depends on DRM && PCI
372 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
373 graphics card. If M is selected, the module will be called tdfx.
376 tristate "ATI Rage 128"
377 depends on DRM && PCI
380 Choose this option if you have an ATI Rage 128 graphics card. If M
381 is selected, the module will be called r128. AGP support for
382 this card is strongly suggested (unless you have a PCI version).
385 tristate "Intel I810"
386 # !PREEMPT because of missing ioctl locking
387 depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
389 Choose this option if you have an Intel I810 graphics card. If M is
390 selected, the module will be called i810. AGP support is required
391 for this driver to work.
394 tristate "Matrox g200/g400"
395 depends on DRM && PCI
398 Choose this option if you have a Matrox G200, G400 or G450 graphics
399 card. If M is selected, the module will be called mga. AGP
400 support is required for this driver to work.
403 tristate "SiS video cards"
404 depends on DRM && AGP
405 depends on FB_SIS || FB_SIS=n
407 Choose this option if you have a SiS 630 or compatible video
408 chipset. If M is selected the module will be called sis. AGP
409 support is required for this driver to work.
412 tristate "Via unichrome video cards"
413 depends on DRM && PCI
415 Choose this option if you have a Via unichrome or compatible video
416 chipset. If M is selected the module will be called via.
419 tristate "Savage video cards"
420 depends on DRM && PCI
422 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
423 chipset. If M is selected the module will be called savage.
427 # Separate option because drm_panel_orientation_quirks.c is shared with fbdev
428 config DRM_PANEL_ORIENTATION_QUIRKS
431 config DRM_LIB_RANDOM