1 # SPDX-License-Identifier: GPL-2.0-only
3 # Drm device configuration
5 # This driver provides support for the
6 # Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
9 tristate "Direct Rendering Manager (XFree86 4.1.0 and higher DRI support)"
10 depends on (AGP || AGP=n) && !EMULATED_CMPXCHG && HAS_DMA
11 select DRM_PANEL_ORIENTATION_QUIRKS
16 select DMA_SHARED_BUFFER
19 Kernel-level support for the Direct Rendering Infrastructure (DRI)
20 introduced in XFree86 4.0. If you say Y here, you need to select
21 the module that's right for your graphics card from the list below.
22 These modules provide support for synchronization, security, and
23 DMA transfers. Please see <http://dri.sourceforge.net/> for more
24 details. You should also select and configure AGP
25 (/dev/agpgart) support if it is available for your platform.
31 config DRM_DP_AUX_CHARDEV
32 bool "DRM DP AUX Interface"
35 Choose this option to enable a /dev/drm_dp_auxN node that allows to
36 read and write values to arbitrary DPCD registers on the DP aux
40 bool "Insert extra checks and debug info into the DRM range managers"
43 depends on STACKTRACE_SUPPORT
46 Enable allocation tracking of memory manager and leak detection on
49 Recommended for driver developers only.
53 config DRM_DEBUG_SELFTEST
54 tristate "kselftests for DRM"
56 depends on DEBUG_KERNEL
62 This option provides kernel modules that can be used to run
63 various selftests on parts of the DRM api. This option is not
64 useful for distributions or general kernels, but only for kernel
65 developers working on DRM and associated drivers.
73 CRTC helpers for KMS drivers.
75 config DRM_KMS_FB_HELPER
77 depends on DRM_KMS_HELPER
79 select FRAMEBUFFER_CONSOLE if !EXPERT
80 select FRAMEBUFFER_CONSOLE_DETECT_PRIMARY if FRAMEBUFFER_CONSOLE
82 select FB_SYS_FILLRECT
83 select FB_SYS_COPYAREA
84 select FB_SYS_IMAGEBLIT
85 select FB_CFB_FILLRECT
86 select FB_CFB_COPYAREA
87 select FB_CFB_IMAGEBLIT
90 FBDEV helpers for KMS drivers.
92 config DRM_FBDEV_EMULATION
93 bool "Enable legacy fbdev support for your modesetting driver"
96 select DRM_KMS_FB_HELPER
99 Choose this option if you have a need for the legacy fbdev
100 support. Note that this support also provides the linux console
101 support on top of your modesetting driver.
103 If in doubt, say "Y".
105 config DRM_FBDEV_OVERALLOC
106 int "Overallocation of the fbdev buffer"
107 depends on DRM_FBDEV_EMULATION
110 Defines the fbdev buffer overallocation in percent. Default
111 is 100. Typical values for double buffering will be 200,
112 triple buffering 300.
114 config DRM_FBDEV_LEAK_PHYS_SMEM
115 bool "Shamelessly allow leaking of fbdev physical address (DANGEROUS)"
116 depends on DRM_FBDEV_EMULATION && EXPERT
119 In order to keep user-space compatibility, we want in certain
120 use-cases to keep leaking the fbdev physical address to the
121 user-space program handling the fbdev buffer.
122 This affects, not only, Amlogic, Allwinner or Rockchip devices
123 with ARM Mali GPUs using an userspace Blob.
124 This option is not supported by upstream developers and should be
125 removed as soon as possible and be considered as a broken and
126 legacy behaviour from a modern fbdev device driver.
128 Please send any bug reports when using this to your proprietary
129 software vendor that requires this.
131 If in doubt, say "N" or spread the word to your closed source
134 config DRM_LOAD_EDID_FIRMWARE
135 bool "Allow to specify an EDID data set instead of probing for it"
138 Say Y here, if you want to use EDID data to be loaded from the
139 /lib/firmware directory or one of the provided built-in
140 data sets. This may be necessary, if the graphics adapter or
141 monitor are unable to provide appropriate EDID data. Since this
142 feature is provided as a workaround for broken hardware, the
143 default case is N. Details and instructions how to build your own
144 EDID data are given in Documentation/EDID/HOWTO.txt.
147 bool "Enable DisplayPort CEC-Tunneling-over-AUX HDMI support"
150 Choose this option if you want to enable HDMI CEC support for
151 DisplayPort/USB-C to HDMI adapters.
153 Note: not all adapters support this feature, and even for those
154 that do support this they often do not hook up the CEC pin.
158 depends on DRM && MMU
160 GPU memory management subsystem for devices with multiple
161 GPU memory types. Will be enabled automatically if a device driver
164 config DRM_VRAM_HELPER
169 Helpers for VRAM memory management
171 config DRM_GEM_CMA_HELPER
175 Choose this if you need the GEM CMA helper functions
177 config DRM_KMS_CMA_HELPER
180 select DRM_GEM_CMA_HELPER
182 Choose this if you need the KMS CMA helper functions
184 config DRM_GEM_SHMEM_HELPER
188 Choose this if you need the GEM shmem helper functions
192 depends on DRM && MMU
198 source "drivers/gpu/drm/i2c/Kconfig"
200 source "drivers/gpu/drm/arm/Kconfig"
203 tristate "ATI Radeon"
204 depends on DRM && PCI && MMU
206 select DRM_KMS_HELPER
210 select BACKLIGHT_CLASS_DEVICE
213 Choose this option if you have an ATI Radeon graphics card. There
214 are both PCI and AGP versions. You don't need to choose this to
215 run the Radeon in plain VGA mode.
217 If M is selected, the module will be called radeon.
219 source "drivers/gpu/drm/radeon/Kconfig"
223 depends on DRM && PCI && MMU
225 select DRM_KMS_HELPER
230 select BACKLIGHT_CLASS_DEVICE
234 Choose this option if you have a recent AMD Radeon graphics card.
236 If M is selected, the module will be called amdgpu.
238 source "drivers/gpu/drm/amd/amdgpu/Kconfig"
240 source "drivers/gpu/drm/nouveau/Kconfig"
242 source "drivers/gpu/drm/i915/Kconfig"
245 tristate "Virtual GEM provider"
248 Choose this option to get a virtual graphics memory manager,
249 as used by Mesa's software renderer for enhanced performance.
250 If M is selected the module will be called vgem.
253 tristate "Virtual KMS (EXPERIMENTAL)"
255 select DRM_KMS_HELPER
258 Virtual Kernel Mode-Setting (VKMS) is used for testing or for
259 running GPU in a headless machines. Choose this option to get
262 If M is selected the module will be called vkms.
264 config DRM_ATI_PCIGART
267 source "drivers/gpu/drm/exynos/Kconfig"
269 source "drivers/gpu/drm/rockchip/Kconfig"
271 source "drivers/gpu/drm/vmwgfx/Kconfig"
273 source "drivers/gpu/drm/gma500/Kconfig"
275 source "drivers/gpu/drm/udl/Kconfig"
277 source "drivers/gpu/drm/ast/Kconfig"
279 source "drivers/gpu/drm/mgag200/Kconfig"
281 source "drivers/gpu/drm/cirrus/Kconfig"
283 source "drivers/gpu/drm/armada/Kconfig"
285 source "drivers/gpu/drm/atmel-hlcdc/Kconfig"
287 source "drivers/gpu/drm/rcar-du/Kconfig"
289 source "drivers/gpu/drm/shmobile/Kconfig"
291 source "drivers/gpu/drm/sun4i/Kconfig"
293 source "drivers/gpu/drm/omapdrm/Kconfig"
295 source "drivers/gpu/drm/tilcdc/Kconfig"
297 source "drivers/gpu/drm/qxl/Kconfig"
299 source "drivers/gpu/drm/bochs/Kconfig"
301 source "drivers/gpu/drm/virtio/Kconfig"
303 source "drivers/gpu/drm/msm/Kconfig"
305 source "drivers/gpu/drm/fsl-dcu/Kconfig"
307 source "drivers/gpu/drm/tegra/Kconfig"
309 source "drivers/gpu/drm/stm/Kconfig"
311 source "drivers/gpu/drm/panel/Kconfig"
313 source "drivers/gpu/drm/bridge/Kconfig"
315 source "drivers/gpu/drm/sti/Kconfig"
317 source "drivers/gpu/drm/imx/Kconfig"
319 source "drivers/gpu/drm/v3d/Kconfig"
321 source "drivers/gpu/drm/vc4/Kconfig"
323 source "drivers/gpu/drm/etnaviv/Kconfig"
325 source "drivers/gpu/drm/arc/Kconfig"
327 source "drivers/gpu/drm/hisilicon/Kconfig"
329 source "drivers/gpu/drm/mediatek/Kconfig"
331 source "drivers/gpu/drm/zte/Kconfig"
333 source "drivers/gpu/drm/mxsfb/Kconfig"
335 source "drivers/gpu/drm/meson/Kconfig"
337 source "drivers/gpu/drm/tinydrm/Kconfig"
339 source "drivers/gpu/drm/pl111/Kconfig"
341 source "drivers/gpu/drm/tve200/Kconfig"
343 source "drivers/gpu/drm/xen/Kconfig"
345 source "drivers/gpu/drm/vboxvideo/Kconfig"
347 source "drivers/gpu/drm/lima/Kconfig"
349 source "drivers/gpu/drm/panfrost/Kconfig"
351 source "drivers/gpu/drm/aspeed/Kconfig"
353 # Keep legacy drivers last
355 menuconfig DRM_LEGACY
356 bool "Enable legacy drivers (DANGEROUS)"
357 depends on DRM && MMU
359 select DRM_ATI_PCIGART if PCI
361 Enable legacy DRI1 drivers. Those drivers expose unsafe and dangerous
362 APIs to user-space, which can be used to circumvent access
363 restrictions and other security measures. For backwards compatibility
364 those drivers are still available, but their use is highly
365 inadvisable and might harm your system.
367 You are recommended to use the safe modeset-only drivers instead, and
368 perform 3D emulation in user-space.
370 Unless you have strong reasons to go rogue, say "N".
375 tristate "3dfx Banshee/Voodoo3+"
376 depends on DRM && PCI
378 Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
379 graphics card. If M is selected, the module will be called tdfx.
382 tristate "ATI Rage 128"
383 depends on DRM && PCI
386 Choose this option if you have an ATI Rage 128 graphics card. If M
387 is selected, the module will be called r128. AGP support for
388 this card is strongly suggested (unless you have a PCI version).
391 tristate "Intel I810"
392 # !PREEMPT because of missing ioctl locking
393 depends on DRM && AGP && AGP_INTEL && (!PREEMPT || BROKEN)
395 Choose this option if you have an Intel I810 graphics card. If M is
396 selected, the module will be called i810. AGP support is required
397 for this driver to work.
400 tristate "Matrox g200/g400"
401 depends on DRM && PCI
404 Choose this option if you have a Matrox G200, G400 or G450 graphics
405 card. If M is selected, the module will be called mga. AGP
406 support is required for this driver to work.
409 tristate "SiS video cards"
410 depends on DRM && AGP
411 depends on FB_SIS || FB_SIS=n
413 Choose this option if you have a SiS 630 or compatible video
414 chipset. If M is selected the module will be called sis. AGP
415 support is required for this driver to work.
418 tristate "Via unichrome video cards"
419 depends on DRM && PCI
421 Choose this option if you have a Via unichrome or compatible video
422 chipset. If M is selected the module will be called via.
425 tristate "Savage video cards"
426 depends on DRM && PCI
428 Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
429 chipset. If M is selected the module will be called savage.
433 # Separate option because drm_panel_orientation_quirks.c is shared with fbdev
434 config DRM_PANEL_ORIENTATION_QUIRKS
437 config DRM_LIB_RANDOM