2 * Copyright © 2006-2007 Intel Corporation
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
24 * Eric Anholt <eric@anholt.net>
27 #include <linux/i2c.h>
28 #include <linux/input.h>
29 #include <linux/intel-iommu.h>
30 #include <linux/kernel.h>
31 #include <linux/module.h>
32 #include <linux/dma-resv.h>
33 #include <linux/slab.h>
35 #include <drm/drm_atomic.h>
36 #include <drm/drm_atomic_helper.h>
37 #include <drm/drm_atomic_uapi.h>
38 #include <drm/drm_dp_helper.h>
39 #include <drm/drm_edid.h>
40 #include <drm/drm_fourcc.h>
41 #include <drm/drm_plane_helper.h>
42 #include <drm/drm_probe_helper.h>
43 #include <drm/drm_rect.h>
44 #include <drm/i915_drm.h>
46 #include "display/intel_crt.h"
47 #include "display/intel_ddi.h"
48 #include "display/intel_dp.h"
49 #include "display/intel_dsi.h"
50 #include "display/intel_dvo.h"
51 #include "display/intel_gmbus.h"
52 #include "display/intel_hdmi.h"
53 #include "display/intel_lvds.h"
54 #include "display/intel_sdvo.h"
55 #include "display/intel_tv.h"
56 #include "display/intel_vdsc.h"
58 #include "gt/intel_rps.h"
61 #include "i915_trace.h"
62 #include "intel_acpi.h"
63 #include "intel_atomic.h"
64 #include "intel_atomic_plane.h"
66 #include "intel_cdclk.h"
67 #include "intel_color.h"
68 #include "intel_display_types.h"
69 #include "intel_fbc.h"
70 #include "intel_fbdev.h"
71 #include "intel_fifo_underrun.h"
72 #include "intel_frontbuffer.h"
73 #include "intel_hdcp.h"
74 #include "intel_hotplug.h"
75 #include "intel_overlay.h"
76 #include "intel_pipe_crc.h"
78 #include "intel_psr.h"
79 #include "intel_quirks.h"
80 #include "intel_sideband.h"
81 #include "intel_sprite.h"
83 #include "intel_vga.h"
85 /* Primary plane formats for gen <= 3 */
86 static const u32 i8xx_primary_formats[] = {
93 /* Primary plane formats for ivb (no fp16 due to hw issue) */
94 static const u32 ivb_primary_formats[] = {
99 DRM_FORMAT_XRGB2101010,
100 DRM_FORMAT_XBGR2101010,
103 /* Primary plane formats for gen >= 4, except ivb */
104 static const u32 i965_primary_formats[] = {
109 DRM_FORMAT_XRGB2101010,
110 DRM_FORMAT_XBGR2101010,
111 DRM_FORMAT_XBGR16161616F,
114 static const u64 i9xx_format_modifiers[] = {
115 I915_FORMAT_MOD_X_TILED,
116 DRM_FORMAT_MOD_LINEAR,
117 DRM_FORMAT_MOD_INVALID
121 static const u32 intel_cursor_formats[] = {
125 static const u64 cursor_format_modifiers[] = {
126 DRM_FORMAT_MOD_LINEAR,
127 DRM_FORMAT_MOD_INVALID
130 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
131 struct intel_crtc_state *pipe_config);
132 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
133 struct intel_crtc_state *pipe_config);
135 static int intel_framebuffer_init(struct intel_framebuffer *ifb,
136 struct drm_i915_gem_object *obj,
137 struct drm_mode_fb_cmd2 *mode_cmd);
138 static void intel_set_pipe_timings(const struct intel_crtc_state *crtc_state);
139 static void intel_set_pipe_src_size(const struct intel_crtc_state *crtc_state);
140 static void intel_cpu_transcoder_set_m_n(const struct intel_crtc_state *crtc_state,
141 const struct intel_link_m_n *m_n,
142 const struct intel_link_m_n *m2_n2);
143 static void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state);
144 static void ironlake_set_pipeconf(const struct intel_crtc_state *crtc_state);
145 static void haswell_set_pipeconf(const struct intel_crtc_state *crtc_state);
146 static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state);
147 static void vlv_prepare_pll(struct intel_crtc *crtc,
148 const struct intel_crtc_state *pipe_config);
149 static void chv_prepare_pll(struct intel_crtc *crtc,
150 const struct intel_crtc_state *pipe_config);
151 static void intel_crtc_init_scalers(struct intel_crtc *crtc,
152 struct intel_crtc_state *crtc_state);
153 static void skylake_pfit_enable(const struct intel_crtc_state *crtc_state);
154 static void ironlake_pfit_disable(const struct intel_crtc_state *old_crtc_state);
155 static void ironlake_pfit_enable(const struct intel_crtc_state *crtc_state);
156 static void intel_modeset_setup_hw_state(struct drm_device *dev,
157 struct drm_modeset_acquire_ctx *ctx);
158 static void intel_pre_disable_primary_noatomic(struct drm_crtc *crtc);
163 } dot, vco, n, m, m1, m2, p, p1;
167 int p2_slow, p2_fast;
171 /* returns HPLL frequency in kHz */
172 int vlv_get_hpll_vco(struct drm_i915_private *dev_priv)
174 int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 };
176 /* Obtain SKU information */
177 hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) &
178 CCK_FUSE_HPLL_FREQ_MASK;
180 return vco_freq[hpll_freq] * 1000;
183 int vlv_get_cck_clock(struct drm_i915_private *dev_priv,
184 const char *name, u32 reg, int ref_freq)
189 val = vlv_cck_read(dev_priv, reg);
190 divider = val & CCK_FREQUENCY_VALUES;
192 WARN((val & CCK_FREQUENCY_STATUS) !=
193 (divider << CCK_FREQUENCY_STATUS_SHIFT),
194 "%s change in progress\n", name);
196 return DIV_ROUND_CLOSEST(ref_freq << 1, divider + 1);
199 int vlv_get_cck_clock_hpll(struct drm_i915_private *dev_priv,
200 const char *name, u32 reg)
204 vlv_cck_get(dev_priv);
206 if (dev_priv->hpll_freq == 0)
207 dev_priv->hpll_freq = vlv_get_hpll_vco(dev_priv);
209 hpll = vlv_get_cck_clock(dev_priv, name, reg, dev_priv->hpll_freq);
211 vlv_cck_put(dev_priv);
216 static void intel_update_czclk(struct drm_i915_private *dev_priv)
218 if (!(IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)))
221 dev_priv->czclk_freq = vlv_get_cck_clock_hpll(dev_priv, "czclk",
222 CCK_CZ_CLOCK_CONTROL);
224 DRM_DEBUG_DRIVER("CZ clock rate: %d kHz\n", dev_priv->czclk_freq);
227 static inline u32 /* units of 100MHz */
228 intel_fdi_link_freq(struct drm_i915_private *dev_priv,
229 const struct intel_crtc_state *pipe_config)
231 if (HAS_DDI(dev_priv))
232 return pipe_config->port_clock; /* SPLL */
234 return dev_priv->fdi_pll_freq;
237 static const struct intel_limit intel_limits_i8xx_dac = {
238 .dot = { .min = 25000, .max = 350000 },
239 .vco = { .min = 908000, .max = 1512000 },
240 .n = { .min = 2, .max = 16 },
241 .m = { .min = 96, .max = 140 },
242 .m1 = { .min = 18, .max = 26 },
243 .m2 = { .min = 6, .max = 16 },
244 .p = { .min = 4, .max = 128 },
245 .p1 = { .min = 2, .max = 33 },
246 .p2 = { .dot_limit = 165000,
247 .p2_slow = 4, .p2_fast = 2 },
250 static const struct intel_limit intel_limits_i8xx_dvo = {
251 .dot = { .min = 25000, .max = 350000 },
252 .vco = { .min = 908000, .max = 1512000 },
253 .n = { .min = 2, .max = 16 },
254 .m = { .min = 96, .max = 140 },
255 .m1 = { .min = 18, .max = 26 },
256 .m2 = { .min = 6, .max = 16 },
257 .p = { .min = 4, .max = 128 },
258 .p1 = { .min = 2, .max = 33 },
259 .p2 = { .dot_limit = 165000,
260 .p2_slow = 4, .p2_fast = 4 },
263 static const struct intel_limit intel_limits_i8xx_lvds = {
264 .dot = { .min = 25000, .max = 350000 },
265 .vco = { .min = 908000, .max = 1512000 },
266 .n = { .min = 2, .max = 16 },
267 .m = { .min = 96, .max = 140 },
268 .m1 = { .min = 18, .max = 26 },
269 .m2 = { .min = 6, .max = 16 },
270 .p = { .min = 4, .max = 128 },
271 .p1 = { .min = 1, .max = 6 },
272 .p2 = { .dot_limit = 165000,
273 .p2_slow = 14, .p2_fast = 7 },
276 static const struct intel_limit intel_limits_i9xx_sdvo = {
277 .dot = { .min = 20000, .max = 400000 },
278 .vco = { .min = 1400000, .max = 2800000 },
279 .n = { .min = 1, .max = 6 },
280 .m = { .min = 70, .max = 120 },
281 .m1 = { .min = 8, .max = 18 },
282 .m2 = { .min = 3, .max = 7 },
283 .p = { .min = 5, .max = 80 },
284 .p1 = { .min = 1, .max = 8 },
285 .p2 = { .dot_limit = 200000,
286 .p2_slow = 10, .p2_fast = 5 },
289 static const struct intel_limit intel_limits_i9xx_lvds = {
290 .dot = { .min = 20000, .max = 400000 },
291 .vco = { .min = 1400000, .max = 2800000 },
292 .n = { .min = 1, .max = 6 },
293 .m = { .min = 70, .max = 120 },
294 .m1 = { .min = 8, .max = 18 },
295 .m2 = { .min = 3, .max = 7 },
296 .p = { .min = 7, .max = 98 },
297 .p1 = { .min = 1, .max = 8 },
298 .p2 = { .dot_limit = 112000,
299 .p2_slow = 14, .p2_fast = 7 },
303 static const struct intel_limit intel_limits_g4x_sdvo = {
304 .dot = { .min = 25000, .max = 270000 },
305 .vco = { .min = 1750000, .max = 3500000},
306 .n = { .min = 1, .max = 4 },
307 .m = { .min = 104, .max = 138 },
308 .m1 = { .min = 17, .max = 23 },
309 .m2 = { .min = 5, .max = 11 },
310 .p = { .min = 10, .max = 30 },
311 .p1 = { .min = 1, .max = 3},
312 .p2 = { .dot_limit = 270000,
318 static const struct intel_limit intel_limits_g4x_hdmi = {
319 .dot = { .min = 22000, .max = 400000 },
320 .vco = { .min = 1750000, .max = 3500000},
321 .n = { .min = 1, .max = 4 },
322 .m = { .min = 104, .max = 138 },
323 .m1 = { .min = 16, .max = 23 },
324 .m2 = { .min = 5, .max = 11 },
325 .p = { .min = 5, .max = 80 },
326 .p1 = { .min = 1, .max = 8},
327 .p2 = { .dot_limit = 165000,
328 .p2_slow = 10, .p2_fast = 5 },
331 static const struct intel_limit intel_limits_g4x_single_channel_lvds = {
332 .dot = { .min = 20000, .max = 115000 },
333 .vco = { .min = 1750000, .max = 3500000 },
334 .n = { .min = 1, .max = 3 },
335 .m = { .min = 104, .max = 138 },
336 .m1 = { .min = 17, .max = 23 },
337 .m2 = { .min = 5, .max = 11 },
338 .p = { .min = 28, .max = 112 },
339 .p1 = { .min = 2, .max = 8 },
340 .p2 = { .dot_limit = 0,
341 .p2_slow = 14, .p2_fast = 14
345 static const struct intel_limit intel_limits_g4x_dual_channel_lvds = {
346 .dot = { .min = 80000, .max = 224000 },
347 .vco = { .min = 1750000, .max = 3500000 },
348 .n = { .min = 1, .max = 3 },
349 .m = { .min = 104, .max = 138 },
350 .m1 = { .min = 17, .max = 23 },
351 .m2 = { .min = 5, .max = 11 },
352 .p = { .min = 14, .max = 42 },
353 .p1 = { .min = 2, .max = 6 },
354 .p2 = { .dot_limit = 0,
355 .p2_slow = 7, .p2_fast = 7
359 static const struct intel_limit intel_limits_pineview_sdvo = {
360 .dot = { .min = 20000, .max = 400000},
361 .vco = { .min = 1700000, .max = 3500000 },
362 /* Pineview's Ncounter is a ring counter */
363 .n = { .min = 3, .max = 6 },
364 .m = { .min = 2, .max = 256 },
365 /* Pineview only has one combined m divider, which we treat as m2. */
366 .m1 = { .min = 0, .max = 0 },
367 .m2 = { .min = 0, .max = 254 },
368 .p = { .min = 5, .max = 80 },
369 .p1 = { .min = 1, .max = 8 },
370 .p2 = { .dot_limit = 200000,
371 .p2_slow = 10, .p2_fast = 5 },
374 static const struct intel_limit intel_limits_pineview_lvds = {
375 .dot = { .min = 20000, .max = 400000 },
376 .vco = { .min = 1700000, .max = 3500000 },
377 .n = { .min = 3, .max = 6 },
378 .m = { .min = 2, .max = 256 },
379 .m1 = { .min = 0, .max = 0 },
380 .m2 = { .min = 0, .max = 254 },
381 .p = { .min = 7, .max = 112 },
382 .p1 = { .min = 1, .max = 8 },
383 .p2 = { .dot_limit = 112000,
384 .p2_slow = 14, .p2_fast = 14 },
387 /* Ironlake / Sandybridge
389 * We calculate clock using (register_value + 2) for N/M1/M2, so here
390 * the range value for them is (actual_value - 2).
392 static const struct intel_limit intel_limits_ironlake_dac = {
393 .dot = { .min = 25000, .max = 350000 },
394 .vco = { .min = 1760000, .max = 3510000 },
395 .n = { .min = 1, .max = 5 },
396 .m = { .min = 79, .max = 127 },
397 .m1 = { .min = 12, .max = 22 },
398 .m2 = { .min = 5, .max = 9 },
399 .p = { .min = 5, .max = 80 },
400 .p1 = { .min = 1, .max = 8 },
401 .p2 = { .dot_limit = 225000,
402 .p2_slow = 10, .p2_fast = 5 },
405 static const struct intel_limit intel_limits_ironlake_single_lvds = {
406 .dot = { .min = 25000, .max = 350000 },
407 .vco = { .min = 1760000, .max = 3510000 },
408 .n = { .min = 1, .max = 3 },
409 .m = { .min = 79, .max = 118 },
410 .m1 = { .min = 12, .max = 22 },
411 .m2 = { .min = 5, .max = 9 },
412 .p = { .min = 28, .max = 112 },
413 .p1 = { .min = 2, .max = 8 },
414 .p2 = { .dot_limit = 225000,
415 .p2_slow = 14, .p2_fast = 14 },
418 static const struct intel_limit intel_limits_ironlake_dual_lvds = {
419 .dot = { .min = 25000, .max = 350000 },
420 .vco = { .min = 1760000, .max = 3510000 },
421 .n = { .min = 1, .max = 3 },
422 .m = { .min = 79, .max = 127 },
423 .m1 = { .min = 12, .max = 22 },
424 .m2 = { .min = 5, .max = 9 },
425 .p = { .min = 14, .max = 56 },
426 .p1 = { .min = 2, .max = 8 },
427 .p2 = { .dot_limit = 225000,
428 .p2_slow = 7, .p2_fast = 7 },
431 /* LVDS 100mhz refclk limits. */
432 static const struct intel_limit intel_limits_ironlake_single_lvds_100m = {
433 .dot = { .min = 25000, .max = 350000 },
434 .vco = { .min = 1760000, .max = 3510000 },
435 .n = { .min = 1, .max = 2 },
436 .m = { .min = 79, .max = 126 },
437 .m1 = { .min = 12, .max = 22 },
438 .m2 = { .min = 5, .max = 9 },
439 .p = { .min = 28, .max = 112 },
440 .p1 = { .min = 2, .max = 8 },
441 .p2 = { .dot_limit = 225000,
442 .p2_slow = 14, .p2_fast = 14 },
445 static const struct intel_limit intel_limits_ironlake_dual_lvds_100m = {
446 .dot = { .min = 25000, .max = 350000 },
447 .vco = { .min = 1760000, .max = 3510000 },
448 .n = { .min = 1, .max = 3 },
449 .m = { .min = 79, .max = 126 },
450 .m1 = { .min = 12, .max = 22 },
451 .m2 = { .min = 5, .max = 9 },
452 .p = { .min = 14, .max = 42 },
453 .p1 = { .min = 2, .max = 6 },
454 .p2 = { .dot_limit = 225000,
455 .p2_slow = 7, .p2_fast = 7 },
458 static const struct intel_limit intel_limits_vlv = {
460 * These are the data rate limits (measured in fast clocks)
461 * since those are the strictest limits we have. The fast
462 * clock and actual rate limits are more relaxed, so checking
463 * them would make no difference.
465 .dot = { .min = 25000 * 5, .max = 270000 * 5 },
466 .vco = { .min = 4000000, .max = 6000000 },
467 .n = { .min = 1, .max = 7 },
468 .m1 = { .min = 2, .max = 3 },
469 .m2 = { .min = 11, .max = 156 },
470 .p1 = { .min = 2, .max = 3 },
471 .p2 = { .p2_slow = 2, .p2_fast = 20 }, /* slow=min, fast=max */
474 static const struct intel_limit intel_limits_chv = {
476 * These are the data rate limits (measured in fast clocks)
477 * since those are the strictest limits we have. The fast
478 * clock and actual rate limits are more relaxed, so checking
479 * them would make no difference.
481 .dot = { .min = 25000 * 5, .max = 540000 * 5},
482 .vco = { .min = 4800000, .max = 6480000 },
483 .n = { .min = 1, .max = 1 },
484 .m1 = { .min = 2, .max = 2 },
485 .m2 = { .min = 24 << 22, .max = 175 << 22 },
486 .p1 = { .min = 2, .max = 4 },
487 .p2 = { .p2_slow = 1, .p2_fast = 14 },
490 static const struct intel_limit intel_limits_bxt = {
491 /* FIXME: find real dot limits */
492 .dot = { .min = 0, .max = INT_MAX },
493 .vco = { .min = 4800000, .max = 6700000 },
494 .n = { .min = 1, .max = 1 },
495 .m1 = { .min = 2, .max = 2 },
496 /* FIXME: find real m2 limits */
497 .m2 = { .min = 2 << 22, .max = 255 << 22 },
498 .p1 = { .min = 2, .max = 4 },
499 .p2 = { .p2_slow = 1, .p2_fast = 20 },
502 /* WA Display #0827: Gen9:all */
504 skl_wa_827(struct drm_i915_private *dev_priv, enum pipe pipe, bool enable)
507 I915_WRITE(CLKGATE_DIS_PSL(pipe),
508 I915_READ(CLKGATE_DIS_PSL(pipe)) |
509 DUPS1_GATING_DIS | DUPS2_GATING_DIS);
511 I915_WRITE(CLKGATE_DIS_PSL(pipe),
512 I915_READ(CLKGATE_DIS_PSL(pipe)) &
513 ~(DUPS1_GATING_DIS | DUPS2_GATING_DIS));
516 /* Wa_2006604312:icl */
518 icl_wa_scalerclkgating(struct drm_i915_private *dev_priv, enum pipe pipe,
522 I915_WRITE(CLKGATE_DIS_PSL(pipe),
523 I915_READ(CLKGATE_DIS_PSL(pipe)) | DPFR_GATING_DIS);
525 I915_WRITE(CLKGATE_DIS_PSL(pipe),
526 I915_READ(CLKGATE_DIS_PSL(pipe)) & ~DPFR_GATING_DIS);
530 needs_modeset(const struct intel_crtc_state *state)
532 return drm_atomic_crtc_needs_modeset(&state->base);
536 is_trans_port_sync_mode(const struct intel_crtc_state *crtc_state)
538 return (crtc_state->master_transcoder != INVALID_TRANSCODER ||
539 crtc_state->sync_mode_slaves_mask);
543 is_trans_port_sync_master(const struct intel_crtc_state *crtc_state)
545 return (crtc_state->master_transcoder == INVALID_TRANSCODER &&
546 crtc_state->sync_mode_slaves_mask);
550 * Platform specific helpers to calculate the port PLL loopback- (clock.m),
551 * and post-divider (clock.p) values, pre- (clock.vco) and post-divided fast
552 * (clock.dot) clock rates. This fast dot clock is fed to the port's IO logic.
553 * The helpers' return value is the rate of the clock that is fed to the
554 * display engine's pipe which can be the above fast dot clock rate or a
555 * divided-down version of it.
557 /* m1 is reserved as 0 in Pineview, n is a ring counter */
558 static int pnv_calc_dpll_params(int refclk, struct dpll *clock)
560 clock->m = clock->m2 + 2;
561 clock->p = clock->p1 * clock->p2;
562 if (WARN_ON(clock->n == 0 || clock->p == 0))
564 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
565 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
570 static u32 i9xx_dpll_compute_m(struct dpll *dpll)
572 return 5 * (dpll->m1 + 2) + (dpll->m2 + 2);
575 static int i9xx_calc_dpll_params(int refclk, struct dpll *clock)
577 clock->m = i9xx_dpll_compute_m(clock);
578 clock->p = clock->p1 * clock->p2;
579 if (WARN_ON(clock->n + 2 == 0 || clock->p == 0))
581 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2);
582 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
587 static int vlv_calc_dpll_params(int refclk, struct dpll *clock)
589 clock->m = clock->m1 * clock->m2;
590 clock->p = clock->p1 * clock->p2;
591 if (WARN_ON(clock->n == 0 || clock->p == 0))
593 clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n);
594 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
596 return clock->dot / 5;
599 int chv_calc_dpll_params(int refclk, struct dpll *clock)
601 clock->m = clock->m1 * clock->m2;
602 clock->p = clock->p1 * clock->p2;
603 if (WARN_ON(clock->n == 0 || clock->p == 0))
605 clock->vco = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(refclk, clock->m),
607 clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p);
609 return clock->dot / 5;
612 #define INTELPllInvalid(s) do { /* DRM_DEBUG(s); */ return false; } while (0)
615 * Returns whether the given set of divisors are valid for a given refclk with
616 * the given connectors.
618 static bool intel_PLL_is_valid(struct drm_i915_private *dev_priv,
619 const struct intel_limit *limit,
620 const struct dpll *clock)
622 if (clock->n < limit->n.min || limit->n.max < clock->n)
623 INTELPllInvalid("n out of range\n");
624 if (clock->p1 < limit->p1.min || limit->p1.max < clock->p1)
625 INTELPllInvalid("p1 out of range\n");
626 if (clock->m2 < limit->m2.min || limit->m2.max < clock->m2)
627 INTELPllInvalid("m2 out of range\n");
628 if (clock->m1 < limit->m1.min || limit->m1.max < clock->m1)
629 INTELPllInvalid("m1 out of range\n");
631 if (!IS_PINEVIEW(dev_priv) && !IS_VALLEYVIEW(dev_priv) &&
632 !IS_CHERRYVIEW(dev_priv) && !IS_GEN9_LP(dev_priv))
633 if (clock->m1 <= clock->m2)
634 INTELPllInvalid("m1 <= m2\n");
636 if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv) &&
637 !IS_GEN9_LP(dev_priv)) {
638 if (clock->p < limit->p.min || limit->p.max < clock->p)
639 INTELPllInvalid("p out of range\n");
640 if (clock->m < limit->m.min || limit->m.max < clock->m)
641 INTELPllInvalid("m out of range\n");
644 if (clock->vco < limit->vco.min || limit->vco.max < clock->vco)
645 INTELPllInvalid("vco out of range\n");
646 /* XXX: We may need to be checking "Dot clock" depending on the multiplier,
647 * connector, etc., rather than just a single range.
649 if (clock->dot < limit->dot.min || limit->dot.max < clock->dot)
650 INTELPllInvalid("dot out of range\n");
656 i9xx_select_p2_div(const struct intel_limit *limit,
657 const struct intel_crtc_state *crtc_state,
660 struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
662 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
664 * For LVDS just rely on its current settings for dual-channel.
665 * We haven't figured out how to reliably set up different
666 * single/dual channel state, if we even can.
668 if (intel_is_dual_link_lvds(dev_priv))
669 return limit->p2.p2_fast;
671 return limit->p2.p2_slow;
673 if (target < limit->p2.dot_limit)
674 return limit->p2.p2_slow;
676 return limit->p2.p2_fast;
681 * Returns a set of divisors for the desired target clock with the given
682 * refclk, or FALSE. The returned values represent the clock equation:
683 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
685 * Target and reference clocks are specified in kHz.
687 * If match_clock is provided, then best_clock P divider must match the P
688 * divider from @match_clock used for LVDS downclocking.
691 i9xx_find_best_dpll(const struct intel_limit *limit,
692 struct intel_crtc_state *crtc_state,
693 int target, int refclk, struct dpll *match_clock,
694 struct dpll *best_clock)
696 struct drm_device *dev = crtc_state->base.crtc->dev;
700 memset(best_clock, 0, sizeof(*best_clock));
702 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
704 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
706 for (clock.m2 = limit->m2.min;
707 clock.m2 <= limit->m2.max; clock.m2++) {
708 if (clock.m2 >= clock.m1)
710 for (clock.n = limit->n.min;
711 clock.n <= limit->n.max; clock.n++) {
712 for (clock.p1 = limit->p1.min;
713 clock.p1 <= limit->p1.max; clock.p1++) {
716 i9xx_calc_dpll_params(refclk, &clock);
717 if (!intel_PLL_is_valid(to_i915(dev),
722 clock.p != match_clock->p)
725 this_err = abs(clock.dot - target);
726 if (this_err < err) {
735 return (err != target);
739 * Returns a set of divisors for the desired target clock with the given
740 * refclk, or FALSE. The returned values represent the clock equation:
741 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
743 * Target and reference clocks are specified in kHz.
745 * If match_clock is provided, then best_clock P divider must match the P
746 * divider from @match_clock used for LVDS downclocking.
749 pnv_find_best_dpll(const struct intel_limit *limit,
750 struct intel_crtc_state *crtc_state,
751 int target, int refclk, struct dpll *match_clock,
752 struct dpll *best_clock)
754 struct drm_device *dev = crtc_state->base.crtc->dev;
758 memset(best_clock, 0, sizeof(*best_clock));
760 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
762 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max;
764 for (clock.m2 = limit->m2.min;
765 clock.m2 <= limit->m2.max; clock.m2++) {
766 for (clock.n = limit->n.min;
767 clock.n <= limit->n.max; clock.n++) {
768 for (clock.p1 = limit->p1.min;
769 clock.p1 <= limit->p1.max; clock.p1++) {
772 pnv_calc_dpll_params(refclk, &clock);
773 if (!intel_PLL_is_valid(to_i915(dev),
778 clock.p != match_clock->p)
781 this_err = abs(clock.dot - target);
782 if (this_err < err) {
791 return (err != target);
795 * Returns a set of divisors for the desired target clock with the given
796 * refclk, or FALSE. The returned values represent the clock equation:
797 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
799 * Target and reference clocks are specified in kHz.
801 * If match_clock is provided, then best_clock P divider must match the P
802 * divider from @match_clock used for LVDS downclocking.
805 g4x_find_best_dpll(const struct intel_limit *limit,
806 struct intel_crtc_state *crtc_state,
807 int target, int refclk, struct dpll *match_clock,
808 struct dpll *best_clock)
810 struct drm_device *dev = crtc_state->base.crtc->dev;
814 /* approximately equals target * 0.00585 */
815 int err_most = (target >> 8) + (target >> 9);
817 memset(best_clock, 0, sizeof(*best_clock));
819 clock.p2 = i9xx_select_p2_div(limit, crtc_state, target);
821 max_n = limit->n.max;
822 /* based on hardware requirement, prefer smaller n to precision */
823 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
824 /* based on hardware requirement, prefere larger m1,m2 */
825 for (clock.m1 = limit->m1.max;
826 clock.m1 >= limit->m1.min; clock.m1--) {
827 for (clock.m2 = limit->m2.max;
828 clock.m2 >= limit->m2.min; clock.m2--) {
829 for (clock.p1 = limit->p1.max;
830 clock.p1 >= limit->p1.min; clock.p1--) {
833 i9xx_calc_dpll_params(refclk, &clock);
834 if (!intel_PLL_is_valid(to_i915(dev),
839 this_err = abs(clock.dot - target);
840 if (this_err < err_most) {
854 * Check if the calculated PLL configuration is more optimal compared to the
855 * best configuration and error found so far. Return the calculated error.
857 static bool vlv_PLL_is_optimal(struct drm_device *dev, int target_freq,
858 const struct dpll *calculated_clock,
859 const struct dpll *best_clock,
860 unsigned int best_error_ppm,
861 unsigned int *error_ppm)
864 * For CHV ignore the error and consider only the P value.
865 * Prefer a bigger P value based on HW requirements.
867 if (IS_CHERRYVIEW(to_i915(dev))) {
870 return calculated_clock->p > best_clock->p;
873 if (WARN_ON_ONCE(!target_freq))
876 *error_ppm = div_u64(1000000ULL *
877 abs(target_freq - calculated_clock->dot),
880 * Prefer a better P value over a better (smaller) error if the error
881 * is small. Ensure this preference for future configurations too by
882 * setting the error to 0.
884 if (*error_ppm < 100 && calculated_clock->p > best_clock->p) {
890 return *error_ppm + 10 < best_error_ppm;
894 * Returns a set of divisors for the desired target clock with the given
895 * refclk, or FALSE. The returned values represent the clock equation:
896 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
899 vlv_find_best_dpll(const struct intel_limit *limit,
900 struct intel_crtc_state *crtc_state,
901 int target, int refclk, struct dpll *match_clock,
902 struct dpll *best_clock)
904 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
905 struct drm_device *dev = crtc->base.dev;
907 unsigned int bestppm = 1000000;
908 /* min update 19.2 MHz */
909 int max_n = min(limit->n.max, refclk / 19200);
912 target *= 5; /* fast clock */
914 memset(best_clock, 0, sizeof(*best_clock));
916 /* based on hardware requirement, prefer smaller n to precision */
917 for (clock.n = limit->n.min; clock.n <= max_n; clock.n++) {
918 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
919 for (clock.p2 = limit->p2.p2_fast; clock.p2 >= limit->p2.p2_slow;
920 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
921 clock.p = clock.p1 * clock.p2;
922 /* based on hardware requirement, prefer bigger m1,m2 values */
923 for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; clock.m1++) {
926 clock.m2 = DIV_ROUND_CLOSEST(target * clock.p * clock.n,
929 vlv_calc_dpll_params(refclk, &clock);
931 if (!intel_PLL_is_valid(to_i915(dev),
936 if (!vlv_PLL_is_optimal(dev, target,
954 * Returns a set of divisors for the desired target clock with the given
955 * refclk, or FALSE. The returned values represent the clock equation:
956 * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2.
959 chv_find_best_dpll(const struct intel_limit *limit,
960 struct intel_crtc_state *crtc_state,
961 int target, int refclk, struct dpll *match_clock,
962 struct dpll *best_clock)
964 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
965 struct drm_device *dev = crtc->base.dev;
966 unsigned int best_error_ppm;
971 memset(best_clock, 0, sizeof(*best_clock));
972 best_error_ppm = 1000000;
975 * Based on hardware doc, the n always set to 1, and m1 always
976 * set to 2. If requires to support 200Mhz refclk, we need to
977 * revisit this because n may not 1 anymore.
979 clock.n = 1, clock.m1 = 2;
980 target *= 5; /* fast clock */
982 for (clock.p1 = limit->p1.max; clock.p1 >= limit->p1.min; clock.p1--) {
983 for (clock.p2 = limit->p2.p2_fast;
984 clock.p2 >= limit->p2.p2_slow;
985 clock.p2 -= clock.p2 > 10 ? 2 : 1) {
986 unsigned int error_ppm;
988 clock.p = clock.p1 * clock.p2;
990 m2 = DIV_ROUND_CLOSEST_ULL(mul_u32_u32(target, clock.p * clock.n) << 22,
993 if (m2 > INT_MAX/clock.m1)
998 chv_calc_dpll_params(refclk, &clock);
1000 if (!intel_PLL_is_valid(to_i915(dev), limit, &clock))
1003 if (!vlv_PLL_is_optimal(dev, target, &clock, best_clock,
1004 best_error_ppm, &error_ppm))
1007 *best_clock = clock;
1008 best_error_ppm = error_ppm;
1016 bool bxt_find_best_dpll(struct intel_crtc_state *crtc_state,
1017 struct dpll *best_clock)
1019 int refclk = 100000;
1020 const struct intel_limit *limit = &intel_limits_bxt;
1022 return chv_find_best_dpll(limit, crtc_state,
1023 crtc_state->port_clock, refclk,
1027 bool intel_crtc_active(struct intel_crtc *crtc)
1029 /* Be paranoid as we can arrive here with only partial
1030 * state retrieved from the hardware during setup.
1032 * We can ditch the adjusted_mode.crtc_clock check as soon
1033 * as Haswell has gained clock readout/fastboot support.
1035 * We can ditch the crtc->primary->state->fb check as soon as we can
1036 * properly reconstruct framebuffers.
1038 * FIXME: The intel_crtc->active here should be switched to
1039 * crtc->state->active once we have proper CRTC states wired up
1042 return crtc->active && crtc->base.primary->state->fb &&
1043 crtc->config->base.adjusted_mode.crtc_clock;
1046 enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv,
1049 struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
1051 return crtc->config->cpu_transcoder;
1054 static bool pipe_scanline_is_moving(struct drm_i915_private *dev_priv,
1057 i915_reg_t reg = PIPEDSL(pipe);
1061 if (IS_GEN(dev_priv, 2))
1062 line_mask = DSL_LINEMASK_GEN2;
1064 line_mask = DSL_LINEMASK_GEN3;
1066 line1 = I915_READ(reg) & line_mask;
1068 line2 = I915_READ(reg) & line_mask;
1070 return line1 != line2;
1073 static void wait_for_pipe_scanline_moving(struct intel_crtc *crtc, bool state)
1075 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1076 enum pipe pipe = crtc->pipe;
1078 /* Wait for the display line to settle/start moving */
1079 if (wait_for(pipe_scanline_is_moving(dev_priv, pipe) == state, 100))
1080 DRM_ERROR("pipe %c scanline %s wait timed out\n",
1081 pipe_name(pipe), onoff(state));
1084 static void intel_wait_for_pipe_scanline_stopped(struct intel_crtc *crtc)
1086 wait_for_pipe_scanline_moving(crtc, false);
1089 static void intel_wait_for_pipe_scanline_moving(struct intel_crtc *crtc)
1091 wait_for_pipe_scanline_moving(crtc, true);
1095 intel_wait_for_pipe_off(const struct intel_crtc_state *old_crtc_state)
1097 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
1098 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1100 if (INTEL_GEN(dev_priv) >= 4) {
1101 enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
1102 i915_reg_t reg = PIPECONF(cpu_transcoder);
1104 /* Wait for the Pipe State to go off */
1105 if (intel_de_wait_for_clear(dev_priv, reg,
1106 I965_PIPECONF_ACTIVE, 100))
1107 WARN(1, "pipe_off wait timed out\n");
1109 intel_wait_for_pipe_scanline_stopped(crtc);
1113 /* Only for pre-ILK configs */
1114 void assert_pll(struct drm_i915_private *dev_priv,
1115 enum pipe pipe, bool state)
1120 val = I915_READ(DPLL(pipe));
1121 cur_state = !!(val & DPLL_VCO_ENABLE);
1122 I915_STATE_WARN(cur_state != state,
1123 "PLL state assertion failure (expected %s, current %s)\n",
1124 onoff(state), onoff(cur_state));
1127 /* XXX: the dsi pll is shared between MIPI DSI ports */
1128 void assert_dsi_pll(struct drm_i915_private *dev_priv, bool state)
1133 vlv_cck_get(dev_priv);
1134 val = vlv_cck_read(dev_priv, CCK_REG_DSI_PLL_CONTROL);
1135 vlv_cck_put(dev_priv);
1137 cur_state = val & DSI_PLL_VCO_EN;
1138 I915_STATE_WARN(cur_state != state,
1139 "DSI PLL state assertion failure (expected %s, current %s)\n",
1140 onoff(state), onoff(cur_state));
1143 static void assert_fdi_tx(struct drm_i915_private *dev_priv,
1144 enum pipe pipe, bool state)
1147 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1150 if (HAS_DDI(dev_priv)) {
1151 /* DDI does not have a specific FDI_TX register */
1152 u32 val = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
1153 cur_state = !!(val & TRANS_DDI_FUNC_ENABLE);
1155 u32 val = I915_READ(FDI_TX_CTL(pipe));
1156 cur_state = !!(val & FDI_TX_ENABLE);
1158 I915_STATE_WARN(cur_state != state,
1159 "FDI TX state assertion failure (expected %s, current %s)\n",
1160 onoff(state), onoff(cur_state));
1162 #define assert_fdi_tx_enabled(d, p) assert_fdi_tx(d, p, true)
1163 #define assert_fdi_tx_disabled(d, p) assert_fdi_tx(d, p, false)
1165 static void assert_fdi_rx(struct drm_i915_private *dev_priv,
1166 enum pipe pipe, bool state)
1171 val = I915_READ(FDI_RX_CTL(pipe));
1172 cur_state = !!(val & FDI_RX_ENABLE);
1173 I915_STATE_WARN(cur_state != state,
1174 "FDI RX state assertion failure (expected %s, current %s)\n",
1175 onoff(state), onoff(cur_state));
1177 #define assert_fdi_rx_enabled(d, p) assert_fdi_rx(d, p, true)
1178 #define assert_fdi_rx_disabled(d, p) assert_fdi_rx(d, p, false)
1180 static void assert_fdi_tx_pll_enabled(struct drm_i915_private *dev_priv,
1185 /* ILK FDI PLL is always enabled */
1186 if (IS_GEN(dev_priv, 5))
1189 /* On Haswell, DDI ports are responsible for the FDI PLL setup */
1190 if (HAS_DDI(dev_priv))
1193 val = I915_READ(FDI_TX_CTL(pipe));
1194 I915_STATE_WARN(!(val & FDI_TX_PLL_ENABLE), "FDI TX PLL assertion failure, should be active but is disabled\n");
1197 void assert_fdi_rx_pll(struct drm_i915_private *dev_priv,
1198 enum pipe pipe, bool state)
1203 val = I915_READ(FDI_RX_CTL(pipe));
1204 cur_state = !!(val & FDI_RX_PLL_ENABLE);
1205 I915_STATE_WARN(cur_state != state,
1206 "FDI RX PLL assertion failure (expected %s, current %s)\n",
1207 onoff(state), onoff(cur_state));
1210 void assert_panel_unlocked(struct drm_i915_private *dev_priv, enum pipe pipe)
1214 enum pipe panel_pipe = INVALID_PIPE;
1217 if (WARN_ON(HAS_DDI(dev_priv)))
1220 if (HAS_PCH_SPLIT(dev_priv)) {
1223 pp_reg = PP_CONTROL(0);
1224 port_sel = I915_READ(PP_ON_DELAYS(0)) & PANEL_PORT_SELECT_MASK;
1227 case PANEL_PORT_SELECT_LVDS:
1228 intel_lvds_port_enabled(dev_priv, PCH_LVDS, &panel_pipe);
1230 case PANEL_PORT_SELECT_DPA:
1231 intel_dp_port_enabled(dev_priv, DP_A, PORT_A, &panel_pipe);
1233 case PANEL_PORT_SELECT_DPC:
1234 intel_dp_port_enabled(dev_priv, PCH_DP_C, PORT_C, &panel_pipe);
1236 case PANEL_PORT_SELECT_DPD:
1237 intel_dp_port_enabled(dev_priv, PCH_DP_D, PORT_D, &panel_pipe);
1240 MISSING_CASE(port_sel);
1243 } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
1244 /* presumably write lock depends on pipe, not port select */
1245 pp_reg = PP_CONTROL(pipe);
1250 pp_reg = PP_CONTROL(0);
1251 port_sel = I915_READ(PP_ON_DELAYS(0)) & PANEL_PORT_SELECT_MASK;
1253 WARN_ON(port_sel != PANEL_PORT_SELECT_LVDS);
1254 intel_lvds_port_enabled(dev_priv, LVDS, &panel_pipe);
1257 val = I915_READ(pp_reg);
1258 if (!(val & PANEL_POWER_ON) ||
1259 ((val & PANEL_UNLOCK_MASK) == PANEL_UNLOCK_REGS))
1262 I915_STATE_WARN(panel_pipe == pipe && locked,
1263 "panel assertion failure, pipe %c regs locked\n",
1267 void assert_pipe(struct drm_i915_private *dev_priv,
1268 enum pipe pipe, bool state)
1271 enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
1273 enum intel_display_power_domain power_domain;
1274 intel_wakeref_t wakeref;
1276 /* we keep both pipes enabled on 830 */
1277 if (IS_I830(dev_priv))
1280 power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
1281 wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
1283 u32 val = I915_READ(PIPECONF(cpu_transcoder));
1284 cur_state = !!(val & PIPECONF_ENABLE);
1286 intel_display_power_put(dev_priv, power_domain, wakeref);
1291 I915_STATE_WARN(cur_state != state,
1292 "pipe %c assertion failure (expected %s, current %s)\n",
1293 pipe_name(pipe), onoff(state), onoff(cur_state));
1296 static void assert_plane(struct intel_plane *plane, bool state)
1301 cur_state = plane->get_hw_state(plane, &pipe);
1303 I915_STATE_WARN(cur_state != state,
1304 "%s assertion failure (expected %s, current %s)\n",
1305 plane->base.name, onoff(state), onoff(cur_state));
1308 #define assert_plane_enabled(p) assert_plane(p, true)
1309 #define assert_plane_disabled(p) assert_plane(p, false)
1311 static void assert_planes_disabled(struct intel_crtc *crtc)
1313 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1314 struct intel_plane *plane;
1316 for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane)
1317 assert_plane_disabled(plane);
1320 static void assert_vblank_disabled(struct drm_crtc *crtc)
1322 if (I915_STATE_WARN_ON(drm_crtc_vblank_get(crtc) == 0))
1323 drm_crtc_vblank_put(crtc);
1326 void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv,
1332 val = I915_READ(PCH_TRANSCONF(pipe));
1333 enabled = !!(val & TRANS_ENABLE);
1334 I915_STATE_WARN(enabled,
1335 "transcoder assertion failed, should be off on pipe %c but is still active\n",
1339 static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv,
1340 enum pipe pipe, enum port port,
1343 enum pipe port_pipe;
1346 state = intel_dp_port_enabled(dev_priv, dp_reg, port, &port_pipe);
1348 I915_STATE_WARN(state && port_pipe == pipe,
1349 "PCH DP %c enabled on transcoder %c, should be disabled\n",
1350 port_name(port), pipe_name(pipe));
1352 I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && !state && port_pipe == PIPE_B,
1353 "IBX PCH DP %c still using transcoder B\n",
1357 static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv,
1358 enum pipe pipe, enum port port,
1359 i915_reg_t hdmi_reg)
1361 enum pipe port_pipe;
1364 state = intel_sdvo_port_enabled(dev_priv, hdmi_reg, &port_pipe);
1366 I915_STATE_WARN(state && port_pipe == pipe,
1367 "PCH HDMI %c enabled on transcoder %c, should be disabled\n",
1368 port_name(port), pipe_name(pipe));
1370 I915_STATE_WARN(HAS_PCH_IBX(dev_priv) && !state && port_pipe == PIPE_B,
1371 "IBX PCH HDMI %c still using transcoder B\n",
1375 static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv,
1378 enum pipe port_pipe;
1380 assert_pch_dp_disabled(dev_priv, pipe, PORT_B, PCH_DP_B);
1381 assert_pch_dp_disabled(dev_priv, pipe, PORT_C, PCH_DP_C);
1382 assert_pch_dp_disabled(dev_priv, pipe, PORT_D, PCH_DP_D);
1384 I915_STATE_WARN(intel_crt_port_enabled(dev_priv, PCH_ADPA, &port_pipe) &&
1386 "PCH VGA enabled on transcoder %c, should be disabled\n",
1389 I915_STATE_WARN(intel_lvds_port_enabled(dev_priv, PCH_LVDS, &port_pipe) &&
1391 "PCH LVDS enabled on transcoder %c, should be disabled\n",
1394 /* PCH SDVOB multiplex with HDMIB */
1395 assert_pch_hdmi_disabled(dev_priv, pipe, PORT_B, PCH_HDMIB);
1396 assert_pch_hdmi_disabled(dev_priv, pipe, PORT_C, PCH_HDMIC);
1397 assert_pch_hdmi_disabled(dev_priv, pipe, PORT_D, PCH_HDMID);
1400 static void _vlv_enable_pll(struct intel_crtc *crtc,
1401 const struct intel_crtc_state *pipe_config)
1403 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1404 enum pipe pipe = crtc->pipe;
1406 I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
1407 POSTING_READ(DPLL(pipe));
1410 if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1))
1411 DRM_ERROR("DPLL %d failed to lock\n", pipe);
1414 static void vlv_enable_pll(struct intel_crtc *crtc,
1415 const struct intel_crtc_state *pipe_config)
1417 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1418 enum pipe pipe = crtc->pipe;
1420 assert_pipe_disabled(dev_priv, pipe);
1422 /* PLL is protected by panel, make sure we can write it */
1423 assert_panel_unlocked(dev_priv, pipe);
1425 if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
1426 _vlv_enable_pll(crtc, pipe_config);
1428 I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
1429 POSTING_READ(DPLL_MD(pipe));
1433 static void _chv_enable_pll(struct intel_crtc *crtc,
1434 const struct intel_crtc_state *pipe_config)
1436 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1437 enum pipe pipe = crtc->pipe;
1438 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1441 vlv_dpio_get(dev_priv);
1443 /* Enable back the 10bit clock to display controller */
1444 tmp = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1445 tmp |= DPIO_DCLKP_EN;
1446 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), tmp);
1448 vlv_dpio_put(dev_priv);
1451 * Need to wait > 100ns between dclkp clock enable bit and PLL enable.
1456 I915_WRITE(DPLL(pipe), pipe_config->dpll_hw_state.dpll);
1458 /* Check PLL is locked */
1459 if (intel_de_wait_for_set(dev_priv, DPLL(pipe), DPLL_LOCK_VLV, 1))
1460 DRM_ERROR("PLL %d failed to lock\n", pipe);
1463 static void chv_enable_pll(struct intel_crtc *crtc,
1464 const struct intel_crtc_state *pipe_config)
1466 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1467 enum pipe pipe = crtc->pipe;
1469 assert_pipe_disabled(dev_priv, pipe);
1471 /* PLL is protected by panel, make sure we can write it */
1472 assert_panel_unlocked(dev_priv, pipe);
1474 if (pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE)
1475 _chv_enable_pll(crtc, pipe_config);
1477 if (pipe != PIPE_A) {
1479 * WaPixelRepeatModeFixForC0:chv
1481 * DPLLCMD is AWOL. Use chicken bits to propagate
1482 * the value from DPLLBMD to either pipe B or C.
1484 I915_WRITE(CBR4_VLV, CBR_DPLLBMD_PIPE(pipe));
1485 I915_WRITE(DPLL_MD(PIPE_B), pipe_config->dpll_hw_state.dpll_md);
1486 I915_WRITE(CBR4_VLV, 0);
1487 dev_priv->chv_dpll_md[pipe] = pipe_config->dpll_hw_state.dpll_md;
1490 * DPLLB VGA mode also seems to cause problems.
1491 * We should always have it disabled.
1493 WARN_ON((I915_READ(DPLL(PIPE_B)) & DPLL_VGA_MODE_DIS) == 0);
1495 I915_WRITE(DPLL_MD(pipe), pipe_config->dpll_hw_state.dpll_md);
1496 POSTING_READ(DPLL_MD(pipe));
1500 static bool i9xx_has_pps(struct drm_i915_private *dev_priv)
1502 if (IS_I830(dev_priv))
1505 return IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv);
1508 static void i9xx_enable_pll(struct intel_crtc *crtc,
1509 const struct intel_crtc_state *crtc_state)
1511 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1512 i915_reg_t reg = DPLL(crtc->pipe);
1513 u32 dpll = crtc_state->dpll_hw_state.dpll;
1516 assert_pipe_disabled(dev_priv, crtc->pipe);
1518 /* PLL is protected by panel, make sure we can write it */
1519 if (i9xx_has_pps(dev_priv))
1520 assert_panel_unlocked(dev_priv, crtc->pipe);
1523 * Apparently we need to have VGA mode enabled prior to changing
1524 * the P1/P2 dividers. Otherwise the DPLL will keep using the old
1525 * dividers, even though the register value does change.
1527 I915_WRITE(reg, dpll & ~DPLL_VGA_MODE_DIS);
1528 I915_WRITE(reg, dpll);
1530 /* Wait for the clocks to stabilize. */
1534 if (INTEL_GEN(dev_priv) >= 4) {
1535 I915_WRITE(DPLL_MD(crtc->pipe),
1536 crtc_state->dpll_hw_state.dpll_md);
1538 /* The pixel multiplier can only be updated once the
1539 * DPLL is enabled and the clocks are stable.
1541 * So write it again.
1543 I915_WRITE(reg, dpll);
1546 /* We do this three times for luck */
1547 for (i = 0; i < 3; i++) {
1548 I915_WRITE(reg, dpll);
1550 udelay(150); /* wait for warmup */
1554 static void i9xx_disable_pll(const struct intel_crtc_state *crtc_state)
1556 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
1557 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1558 enum pipe pipe = crtc->pipe;
1560 /* Don't disable pipe or pipe PLLs if needed */
1561 if (IS_I830(dev_priv))
1564 /* Make sure the pipe isn't still relying on us */
1565 assert_pipe_disabled(dev_priv, pipe);
1567 I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS);
1568 POSTING_READ(DPLL(pipe));
1571 static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1575 /* Make sure the pipe isn't still relying on us */
1576 assert_pipe_disabled(dev_priv, pipe);
1578 val = DPLL_INTEGRATED_REF_CLK_VLV |
1579 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
1581 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
1583 I915_WRITE(DPLL(pipe), val);
1584 POSTING_READ(DPLL(pipe));
1587 static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
1589 enum dpio_channel port = vlv_pipe_to_channel(pipe);
1592 /* Make sure the pipe isn't still relying on us */
1593 assert_pipe_disabled(dev_priv, pipe);
1595 val = DPLL_SSC_REF_CLK_CHV |
1596 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
1598 val |= DPLL_INTEGRATED_CRI_CLK_VLV;
1600 I915_WRITE(DPLL(pipe), val);
1601 POSTING_READ(DPLL(pipe));
1603 vlv_dpio_get(dev_priv);
1605 /* Disable 10bit clock to display controller */
1606 val = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port));
1607 val &= ~DPIO_DCLKP_EN;
1608 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port), val);
1610 vlv_dpio_put(dev_priv);
1613 void vlv_wait_port_ready(struct drm_i915_private *dev_priv,
1614 struct intel_digital_port *dport,
1615 unsigned int expected_mask)
1618 i915_reg_t dpll_reg;
1620 switch (dport->base.port) {
1622 port_mask = DPLL_PORTB_READY_MASK;
1626 port_mask = DPLL_PORTC_READY_MASK;
1628 expected_mask <<= 4;
1631 port_mask = DPLL_PORTD_READY_MASK;
1632 dpll_reg = DPIO_PHY_STATUS;
1638 if (intel_de_wait_for_register(dev_priv, dpll_reg,
1639 port_mask, expected_mask, 1000))
1640 WARN(1, "timed out waiting for [ENCODER:%d:%s] port ready: got 0x%x, expected 0x%x\n",
1641 dport->base.base.base.id, dport->base.base.name,
1642 I915_READ(dpll_reg) & port_mask, expected_mask);
1645 static void ironlake_enable_pch_transcoder(const struct intel_crtc_state *crtc_state)
1647 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
1648 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1649 enum pipe pipe = crtc->pipe;
1651 u32 val, pipeconf_val;
1653 /* Make sure PCH DPLL is enabled */
1654 assert_shared_dpll_enabled(dev_priv, crtc_state->shared_dpll);
1656 /* FDI must be feeding us bits for PCH ports */
1657 assert_fdi_tx_enabled(dev_priv, pipe);
1658 assert_fdi_rx_enabled(dev_priv, pipe);
1660 if (HAS_PCH_CPT(dev_priv)) {
1661 /* Workaround: Set the timing override bit before enabling the
1662 * pch transcoder. */
1663 reg = TRANS_CHICKEN2(pipe);
1664 val = I915_READ(reg);
1665 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1666 I915_WRITE(reg, val);
1669 reg = PCH_TRANSCONF(pipe);
1670 val = I915_READ(reg);
1671 pipeconf_val = I915_READ(PIPECONF(pipe));
1673 if (HAS_PCH_IBX(dev_priv)) {
1675 * Make the BPC in transcoder be consistent with
1676 * that in pipeconf reg. For HDMI we must use 8bpc
1677 * here for both 8bpc and 12bpc.
1679 val &= ~PIPECONF_BPC_MASK;
1680 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
1681 val |= PIPECONF_8BPC;
1683 val |= pipeconf_val & PIPECONF_BPC_MASK;
1686 val &= ~TRANS_INTERLACE_MASK;
1687 if ((pipeconf_val & PIPECONF_INTERLACE_MASK) == PIPECONF_INTERLACED_ILK) {
1688 if (HAS_PCH_IBX(dev_priv) &&
1689 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO))
1690 val |= TRANS_LEGACY_INTERLACED_ILK;
1692 val |= TRANS_INTERLACED;
1694 val |= TRANS_PROGRESSIVE;
1697 I915_WRITE(reg, val | TRANS_ENABLE);
1698 if (intel_de_wait_for_set(dev_priv, reg, TRANS_STATE_ENABLE, 100))
1699 DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe));
1702 static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv,
1703 enum transcoder cpu_transcoder)
1705 u32 val, pipeconf_val;
1707 /* FDI must be feeding us bits for PCH ports */
1708 assert_fdi_tx_enabled(dev_priv, (enum pipe) cpu_transcoder);
1709 assert_fdi_rx_enabled(dev_priv, PIPE_A);
1711 /* Workaround: set timing override bit. */
1712 val = I915_READ(TRANS_CHICKEN2(PIPE_A));
1713 val |= TRANS_CHICKEN2_TIMING_OVERRIDE;
1714 I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
1717 pipeconf_val = I915_READ(PIPECONF(cpu_transcoder));
1719 if ((pipeconf_val & PIPECONF_INTERLACE_MASK_HSW) ==
1720 PIPECONF_INTERLACED_ILK)
1721 val |= TRANS_INTERLACED;
1723 val |= TRANS_PROGRESSIVE;
1725 I915_WRITE(LPT_TRANSCONF, val);
1726 if (intel_de_wait_for_set(dev_priv, LPT_TRANSCONF,
1727 TRANS_STATE_ENABLE, 100))
1728 DRM_ERROR("Failed to enable PCH transcoder\n");
1731 static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv,
1737 /* FDI relies on the transcoder */
1738 assert_fdi_tx_disabled(dev_priv, pipe);
1739 assert_fdi_rx_disabled(dev_priv, pipe);
1741 /* Ports must be off as well */
1742 assert_pch_ports_disabled(dev_priv, pipe);
1744 reg = PCH_TRANSCONF(pipe);
1745 val = I915_READ(reg);
1746 val &= ~TRANS_ENABLE;
1747 I915_WRITE(reg, val);
1748 /* wait for PCH transcoder off, transcoder state */
1749 if (intel_de_wait_for_clear(dev_priv, reg, TRANS_STATE_ENABLE, 50))
1750 DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe));
1752 if (HAS_PCH_CPT(dev_priv)) {
1753 /* Workaround: Clear the timing override chicken bit again. */
1754 reg = TRANS_CHICKEN2(pipe);
1755 val = I915_READ(reg);
1756 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1757 I915_WRITE(reg, val);
1761 void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv)
1765 val = I915_READ(LPT_TRANSCONF);
1766 val &= ~TRANS_ENABLE;
1767 I915_WRITE(LPT_TRANSCONF, val);
1768 /* wait for PCH transcoder off, transcoder state */
1769 if (intel_de_wait_for_clear(dev_priv, LPT_TRANSCONF,
1770 TRANS_STATE_ENABLE, 50))
1771 DRM_ERROR("Failed to disable PCH transcoder\n");
1773 /* Workaround: clear timing override bit. */
1774 val = I915_READ(TRANS_CHICKEN2(PIPE_A));
1775 val &= ~TRANS_CHICKEN2_TIMING_OVERRIDE;
1776 I915_WRITE(TRANS_CHICKEN2(PIPE_A), val);
1779 enum pipe intel_crtc_pch_transcoder(struct intel_crtc *crtc)
1781 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1783 if (HAS_PCH_LPT(dev_priv))
1789 static u32 intel_crtc_max_vblank_count(const struct intel_crtc_state *crtc_state)
1791 struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
1794 * On i965gm the hardware frame counter reads
1795 * zero when the TV encoder is enabled :(
1797 if (IS_I965GM(dev_priv) &&
1798 (crtc_state->output_types & BIT(INTEL_OUTPUT_TVOUT)))
1801 if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
1802 return 0xffffffff; /* full 32 bit counter */
1803 else if (INTEL_GEN(dev_priv) >= 3)
1804 return 0xffffff; /* only 24 bits of frame count */
1806 return 0; /* Gen2 doesn't have a hardware frame counter */
1809 static void intel_crtc_vblank_on(const struct intel_crtc_state *crtc_state)
1811 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
1813 drm_crtc_set_max_vblank_count(&crtc->base,
1814 intel_crtc_max_vblank_count(crtc_state));
1815 drm_crtc_vblank_on(&crtc->base);
1818 static void intel_enable_pipe(const struct intel_crtc_state *new_crtc_state)
1820 struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->base.crtc);
1821 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1822 enum transcoder cpu_transcoder = new_crtc_state->cpu_transcoder;
1823 enum pipe pipe = crtc->pipe;
1827 DRM_DEBUG_KMS("enabling pipe %c\n", pipe_name(pipe));
1829 assert_planes_disabled(crtc);
1832 * A pipe without a PLL won't actually be able to drive bits from
1833 * a plane. On ILK+ the pipe PLLs are integrated, so we don't
1836 if (HAS_GMCH(dev_priv)) {
1837 if (intel_crtc_has_type(new_crtc_state, INTEL_OUTPUT_DSI))
1838 assert_dsi_pll_enabled(dev_priv);
1840 assert_pll_enabled(dev_priv, pipe);
1842 if (new_crtc_state->has_pch_encoder) {
1843 /* if driving the PCH, we need FDI enabled */
1844 assert_fdi_rx_pll_enabled(dev_priv,
1845 intel_crtc_pch_transcoder(crtc));
1846 assert_fdi_tx_pll_enabled(dev_priv,
1847 (enum pipe) cpu_transcoder);
1849 /* FIXME: assert CPU port conditions for SNB+ */
1852 trace_intel_pipe_enable(crtc);
1854 reg = PIPECONF(cpu_transcoder);
1855 val = I915_READ(reg);
1856 if (val & PIPECONF_ENABLE) {
1857 /* we keep both pipes enabled on 830 */
1858 WARN_ON(!IS_I830(dev_priv));
1862 I915_WRITE(reg, val | PIPECONF_ENABLE);
1866 * Until the pipe starts PIPEDSL reads will return a stale value,
1867 * which causes an apparent vblank timestamp jump when PIPEDSL
1868 * resets to its proper value. That also messes up the frame count
1869 * when it's derived from the timestamps. So let's wait for the
1870 * pipe to start properly before we call drm_crtc_vblank_on()
1872 if (intel_crtc_max_vblank_count(new_crtc_state) == 0)
1873 intel_wait_for_pipe_scanline_moving(crtc);
1876 static void intel_disable_pipe(const struct intel_crtc_state *old_crtc_state)
1878 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
1879 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1880 enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
1881 enum pipe pipe = crtc->pipe;
1885 DRM_DEBUG_KMS("disabling pipe %c\n", pipe_name(pipe));
1888 * Make sure planes won't keep trying to pump pixels to us,
1889 * or we might hang the display.
1891 assert_planes_disabled(crtc);
1893 trace_intel_pipe_disable(crtc);
1895 reg = PIPECONF(cpu_transcoder);
1896 val = I915_READ(reg);
1897 if ((val & PIPECONF_ENABLE) == 0)
1901 * Double wide has implications for planes
1902 * so best keep it disabled when not needed.
1904 if (old_crtc_state->double_wide)
1905 val &= ~PIPECONF_DOUBLE_WIDE;
1907 /* Don't disable pipe or pipe PLLs if needed */
1908 if (!IS_I830(dev_priv))
1909 val &= ~PIPECONF_ENABLE;
1911 I915_WRITE(reg, val);
1912 if ((val & PIPECONF_ENABLE) == 0)
1913 intel_wait_for_pipe_off(old_crtc_state);
1916 static unsigned int intel_tile_size(const struct drm_i915_private *dev_priv)
1918 return IS_GEN(dev_priv, 2) ? 2048 : 4096;
1922 intel_tile_width_bytes(const struct drm_framebuffer *fb, int color_plane)
1924 struct drm_i915_private *dev_priv = to_i915(fb->dev);
1925 unsigned int cpp = fb->format->cpp[color_plane];
1927 switch (fb->modifier) {
1928 case DRM_FORMAT_MOD_LINEAR:
1929 return intel_tile_size(dev_priv);
1930 case I915_FORMAT_MOD_X_TILED:
1931 if (IS_GEN(dev_priv, 2))
1935 case I915_FORMAT_MOD_Y_TILED_CCS:
1936 if (color_plane == 1)
1939 case I915_FORMAT_MOD_Y_TILED:
1940 if (IS_GEN(dev_priv, 2) || HAS_128_BYTE_Y_TILING(dev_priv))
1944 case I915_FORMAT_MOD_Yf_TILED_CCS:
1945 if (color_plane == 1)
1948 case I915_FORMAT_MOD_Yf_TILED:
1964 MISSING_CASE(fb->modifier);
1970 intel_tile_height(const struct drm_framebuffer *fb, int color_plane)
1972 return intel_tile_size(to_i915(fb->dev)) /
1973 intel_tile_width_bytes(fb, color_plane);
1976 /* Return the tile dimensions in pixel units */
1977 static void intel_tile_dims(const struct drm_framebuffer *fb, int color_plane,
1978 unsigned int *tile_width,
1979 unsigned int *tile_height)
1981 unsigned int tile_width_bytes = intel_tile_width_bytes(fb, color_plane);
1982 unsigned int cpp = fb->format->cpp[color_plane];
1984 *tile_width = tile_width_bytes / cpp;
1985 *tile_height = intel_tile_size(to_i915(fb->dev)) / tile_width_bytes;
1989 intel_fb_align_height(const struct drm_framebuffer *fb,
1990 int color_plane, unsigned int height)
1992 unsigned int tile_height = intel_tile_height(fb, color_plane);
1994 return ALIGN(height, tile_height);
1997 unsigned int intel_rotation_info_size(const struct intel_rotation_info *rot_info)
1999 unsigned int size = 0;
2002 for (i = 0 ; i < ARRAY_SIZE(rot_info->plane); i++)
2003 size += rot_info->plane[i].width * rot_info->plane[i].height;
2008 unsigned int intel_remapped_info_size(const struct intel_remapped_info *rem_info)
2010 unsigned int size = 0;
2013 for (i = 0 ; i < ARRAY_SIZE(rem_info->plane); i++)
2014 size += rem_info->plane[i].width * rem_info->plane[i].height;
2020 intel_fill_fb_ggtt_view(struct i915_ggtt_view *view,
2021 const struct drm_framebuffer *fb,
2022 unsigned int rotation)
2024 view->type = I915_GGTT_VIEW_NORMAL;
2025 if (drm_rotation_90_or_270(rotation)) {
2026 view->type = I915_GGTT_VIEW_ROTATED;
2027 view->rotated = to_intel_framebuffer(fb)->rot_info;
2031 static unsigned int intel_cursor_alignment(const struct drm_i915_private *dev_priv)
2033 if (IS_I830(dev_priv))
2035 else if (IS_I85X(dev_priv))
2037 else if (IS_I845G(dev_priv) || IS_I865G(dev_priv))
2043 static unsigned int intel_linear_alignment(const struct drm_i915_private *dev_priv)
2045 if (INTEL_GEN(dev_priv) >= 9)
2047 else if (IS_I965G(dev_priv) || IS_I965GM(dev_priv) ||
2048 IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2050 else if (INTEL_GEN(dev_priv) >= 4)
2056 static unsigned int intel_surf_alignment(const struct drm_framebuffer *fb,
2059 struct drm_i915_private *dev_priv = to_i915(fb->dev);
2061 /* AUX_DIST needs only 4K alignment */
2062 if (color_plane == 1)
2065 switch (fb->modifier) {
2066 case DRM_FORMAT_MOD_LINEAR:
2067 return intel_linear_alignment(dev_priv);
2068 case I915_FORMAT_MOD_X_TILED:
2069 if (INTEL_GEN(dev_priv) >= 9)
2072 case I915_FORMAT_MOD_Y_TILED_CCS:
2073 case I915_FORMAT_MOD_Yf_TILED_CCS:
2074 case I915_FORMAT_MOD_Y_TILED:
2075 case I915_FORMAT_MOD_Yf_TILED:
2076 return 1 * 1024 * 1024;
2078 MISSING_CASE(fb->modifier);
2083 static bool intel_plane_uses_fence(const struct intel_plane_state *plane_state)
2085 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
2086 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
2088 return INTEL_GEN(dev_priv) < 4 ||
2090 plane_state->view.type == I915_GGTT_VIEW_NORMAL);
2094 intel_pin_and_fence_fb_obj(struct drm_framebuffer *fb,
2095 const struct i915_ggtt_view *view,
2097 unsigned long *out_flags)
2099 struct drm_device *dev = fb->dev;
2100 struct drm_i915_private *dev_priv = to_i915(dev);
2101 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2102 intel_wakeref_t wakeref;
2103 struct i915_vma *vma;
2104 unsigned int pinctl;
2107 if (WARN_ON(!i915_gem_object_is_framebuffer(obj)))
2108 return ERR_PTR(-EINVAL);
2110 alignment = intel_surf_alignment(fb, 0);
2112 /* Note that the w/a also requires 64 PTE of padding following the
2113 * bo. We currently fill all unused PTE with the shadow page and so
2114 * we should always have valid PTE following the scanout preventing
2117 if (intel_scanout_needs_vtd_wa(dev_priv) && alignment < 256 * 1024)
2118 alignment = 256 * 1024;
2121 * Global gtt pte registers are special registers which actually forward
2122 * writes to a chunk of system memory. Which means that there is no risk
2123 * that the register values disappear as soon as we call
2124 * intel_runtime_pm_put(), so it is correct to wrap only the
2125 * pin/unpin/fence and not more.
2127 wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm);
2128 i915_gem_object_lock(obj);
2130 atomic_inc(&dev_priv->gpu_error.pending_fb_pin);
2134 /* Valleyview is definitely limited to scanning out the first
2135 * 512MiB. Lets presume this behaviour was inherited from the
2136 * g4x display engine and that all earlier gen are similarly
2137 * limited. Testing suggests that it is a little more
2138 * complicated than this. For example, Cherryview appears quite
2139 * happy to scanout from anywhere within its global aperture.
2141 if (HAS_GMCH(dev_priv))
2142 pinctl |= PIN_MAPPABLE;
2144 vma = i915_gem_object_pin_to_display_plane(obj,
2145 alignment, view, pinctl);
2149 if (uses_fence && i915_vma_is_map_and_fenceable(vma)) {
2152 /* Install a fence for tiled scan-out. Pre-i965 always needs a
2153 * fence, whereas 965+ only requires a fence if using
2154 * framebuffer compression. For simplicity, we always, when
2155 * possible, install a fence as the cost is not that onerous.
2157 * If we fail to fence the tiled scanout, then either the
2158 * modeset will reject the change (which is highly unlikely as
2159 * the affected systems, all but one, do not have unmappable
2160 * space) or we will not be able to enable full powersaving
2161 * techniques (also likely not to apply due to various limits
2162 * FBC and the like impose on the size of the buffer, which
2163 * presumably we violated anyway with this unmappable buffer).
2164 * Anyway, it is presumably better to stumble onwards with
2165 * something and try to run the system in a "less than optimal"
2166 * mode that matches the user configuration.
2168 ret = i915_vma_pin_fence(vma);
2169 if (ret != 0 && INTEL_GEN(dev_priv) < 4) {
2170 i915_gem_object_unpin_from_display_plane(vma);
2175 if (ret == 0 && vma->fence)
2176 *out_flags |= PLANE_HAS_FENCE;
2181 atomic_dec(&dev_priv->gpu_error.pending_fb_pin);
2183 i915_gem_object_unlock(obj);
2184 intel_runtime_pm_put(&dev_priv->runtime_pm, wakeref);
2188 void intel_unpin_fb_vma(struct i915_vma *vma, unsigned long flags)
2190 i915_gem_object_lock(vma->obj);
2191 if (flags & PLANE_HAS_FENCE)
2192 i915_vma_unpin_fence(vma);
2193 i915_gem_object_unpin_from_display_plane(vma);
2194 i915_gem_object_unlock(vma->obj);
2199 static int intel_fb_pitch(const struct drm_framebuffer *fb, int color_plane,
2200 unsigned int rotation)
2202 if (drm_rotation_90_or_270(rotation))
2203 return to_intel_framebuffer(fb)->rotated[color_plane].pitch;
2205 return fb->pitches[color_plane];
2209 * Convert the x/y offsets into a linear offset.
2210 * Only valid with 0/180 degree rotation, which is fine since linear
2211 * offset is only used with linear buffers on pre-hsw and tiled buffers
2212 * with gen2/3, and 90/270 degree rotations isn't supported on any of them.
2214 u32 intel_fb_xy_to_linear(int x, int y,
2215 const struct intel_plane_state *state,
2218 const struct drm_framebuffer *fb = state->base.fb;
2219 unsigned int cpp = fb->format->cpp[color_plane];
2220 unsigned int pitch = state->color_plane[color_plane].stride;
2222 return y * pitch + x * cpp;
2226 * Add the x/y offsets derived from fb->offsets[] to the user
2227 * specified plane src x/y offsets. The resulting x/y offsets
2228 * specify the start of scanout from the beginning of the gtt mapping.
2230 void intel_add_fb_offsets(int *x, int *y,
2231 const struct intel_plane_state *state,
2235 *x += state->color_plane[color_plane].x;
2236 *y += state->color_plane[color_plane].y;
2239 static u32 intel_adjust_tile_offset(int *x, int *y,
2240 unsigned int tile_width,
2241 unsigned int tile_height,
2242 unsigned int tile_size,
2243 unsigned int pitch_tiles,
2247 unsigned int pitch_pixels = pitch_tiles * tile_width;
2250 WARN_ON(old_offset & (tile_size - 1));
2251 WARN_ON(new_offset & (tile_size - 1));
2252 WARN_ON(new_offset > old_offset);
2254 tiles = (old_offset - new_offset) / tile_size;
2256 *y += tiles / pitch_tiles * tile_height;
2257 *x += tiles % pitch_tiles * tile_width;
2259 /* minimize x in case it got needlessly big */
2260 *y += *x / pitch_pixels * tile_height;
2266 static bool is_surface_linear(u64 modifier, int color_plane)
2268 return modifier == DRM_FORMAT_MOD_LINEAR;
2271 static u32 intel_adjust_aligned_offset(int *x, int *y,
2272 const struct drm_framebuffer *fb,
2274 unsigned int rotation,
2276 u32 old_offset, u32 new_offset)
2278 struct drm_i915_private *dev_priv = to_i915(fb->dev);
2279 unsigned int cpp = fb->format->cpp[color_plane];
2281 WARN_ON(new_offset > old_offset);
2283 if (!is_surface_linear(fb->modifier, color_plane)) {
2284 unsigned int tile_size, tile_width, tile_height;
2285 unsigned int pitch_tiles;
2287 tile_size = intel_tile_size(dev_priv);
2288 intel_tile_dims(fb, color_plane, &tile_width, &tile_height);
2290 if (drm_rotation_90_or_270(rotation)) {
2291 pitch_tiles = pitch / tile_height;
2292 swap(tile_width, tile_height);
2294 pitch_tiles = pitch / (tile_width * cpp);
2297 intel_adjust_tile_offset(x, y, tile_width, tile_height,
2298 tile_size, pitch_tiles,
2299 old_offset, new_offset);
2301 old_offset += *y * pitch + *x * cpp;
2303 *y = (old_offset - new_offset) / pitch;
2304 *x = ((old_offset - new_offset) - *y * pitch) / cpp;
2311 * Adjust the tile offset by moving the difference into
2314 static u32 intel_plane_adjust_aligned_offset(int *x, int *y,
2315 const struct intel_plane_state *state,
2317 u32 old_offset, u32 new_offset)
2319 return intel_adjust_aligned_offset(x, y, state->base.fb, color_plane,
2320 state->base.rotation,
2321 state->color_plane[color_plane].stride,
2322 old_offset, new_offset);
2326 * Computes the aligned offset to the base tile and adjusts
2327 * x, y. bytes per pixel is assumed to be a power-of-two.
2329 * In the 90/270 rotated case, x and y are assumed
2330 * to be already rotated to match the rotated GTT view, and
2331 * pitch is the tile_height aligned framebuffer height.
2333 * This function is used when computing the derived information
2334 * under intel_framebuffer, so using any of that information
2335 * here is not allowed. Anything under drm_framebuffer can be
2336 * used. This is why the user has to pass in the pitch since it
2337 * is specified in the rotated orientation.
2339 static u32 intel_compute_aligned_offset(struct drm_i915_private *dev_priv,
2341 const struct drm_framebuffer *fb,
2344 unsigned int rotation,
2347 unsigned int cpp = fb->format->cpp[color_plane];
2348 u32 offset, offset_aligned;
2353 if (!is_surface_linear(fb->modifier, color_plane)) {
2354 unsigned int tile_size, tile_width, tile_height;
2355 unsigned int tile_rows, tiles, pitch_tiles;
2357 tile_size = intel_tile_size(dev_priv);
2358 intel_tile_dims(fb, color_plane, &tile_width, &tile_height);
2360 if (drm_rotation_90_or_270(rotation)) {
2361 pitch_tiles = pitch / tile_height;
2362 swap(tile_width, tile_height);
2364 pitch_tiles = pitch / (tile_width * cpp);
2367 tile_rows = *y / tile_height;
2370 tiles = *x / tile_width;
2373 offset = (tile_rows * pitch_tiles + tiles) * tile_size;
2374 offset_aligned = offset & ~alignment;
2376 intel_adjust_tile_offset(x, y, tile_width, tile_height,
2377 tile_size, pitch_tiles,
2378 offset, offset_aligned);
2380 offset = *y * pitch + *x * cpp;
2381 offset_aligned = offset & ~alignment;
2383 *y = (offset & alignment) / pitch;
2384 *x = ((offset & alignment) - *y * pitch) / cpp;
2387 return offset_aligned;
2390 static u32 intel_plane_compute_aligned_offset(int *x, int *y,
2391 const struct intel_plane_state *state,
2394 struct intel_plane *intel_plane = to_intel_plane(state->base.plane);
2395 struct drm_i915_private *dev_priv = to_i915(intel_plane->base.dev);
2396 const struct drm_framebuffer *fb = state->base.fb;
2397 unsigned int rotation = state->base.rotation;
2398 int pitch = state->color_plane[color_plane].stride;
2401 if (intel_plane->id == PLANE_CURSOR)
2402 alignment = intel_cursor_alignment(dev_priv);
2404 alignment = intel_surf_alignment(fb, color_plane);
2406 return intel_compute_aligned_offset(dev_priv, x, y, fb, color_plane,
2407 pitch, rotation, alignment);
2410 /* Convert the fb->offset[] into x/y offsets */
2411 static int intel_fb_offset_to_xy(int *x, int *y,
2412 const struct drm_framebuffer *fb,
2415 struct drm_i915_private *dev_priv = to_i915(fb->dev);
2416 unsigned int height;
2418 if (fb->modifier != DRM_FORMAT_MOD_LINEAR &&
2419 fb->offsets[color_plane] % intel_tile_size(dev_priv)) {
2420 DRM_DEBUG_KMS("Misaligned offset 0x%08x for color plane %d\n",
2421 fb->offsets[color_plane], color_plane);
2425 height = drm_framebuffer_plane_height(fb->height, fb, color_plane);
2426 height = ALIGN(height, intel_tile_height(fb, color_plane));
2428 /* Catch potential overflows early */
2429 if (add_overflows_t(u32, mul_u32_u32(height, fb->pitches[color_plane]),
2430 fb->offsets[color_plane])) {
2431 DRM_DEBUG_KMS("Bad offset 0x%08x or pitch %d for color plane %d\n",
2432 fb->offsets[color_plane], fb->pitches[color_plane],
2440 intel_adjust_aligned_offset(x, y,
2441 fb, color_plane, DRM_MODE_ROTATE_0,
2442 fb->pitches[color_plane],
2443 fb->offsets[color_plane], 0);
2448 static unsigned int intel_fb_modifier_to_tiling(u64 fb_modifier)
2450 switch (fb_modifier) {
2451 case I915_FORMAT_MOD_X_TILED:
2452 return I915_TILING_X;
2453 case I915_FORMAT_MOD_Y_TILED:
2454 case I915_FORMAT_MOD_Y_TILED_CCS:
2455 return I915_TILING_Y;
2457 return I915_TILING_NONE;
2462 * From the Sky Lake PRM:
2463 * "The Color Control Surface (CCS) contains the compression status of
2464 * the cache-line pairs. The compression state of the cache-line pair
2465 * is specified by 2 bits in the CCS. Each CCS cache-line represents
2466 * an area on the main surface of 16 x16 sets of 128 byte Y-tiled
2467 * cache-line-pairs. CCS is always Y tiled."
2469 * Since cache line pairs refers to horizontally adjacent cache lines,
2470 * each cache line in the CCS corresponds to an area of 32x16 cache
2471 * lines on the main surface. Since each pixel is 4 bytes, this gives
2472 * us a ratio of one byte in the CCS for each 8x16 pixels in the
2475 static const struct drm_format_info ccs_formats[] = {
2476 { .format = DRM_FORMAT_XRGB8888, .depth = 24, .num_planes = 2,
2477 .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
2478 { .format = DRM_FORMAT_XBGR8888, .depth = 24, .num_planes = 2,
2479 .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, },
2480 { .format = DRM_FORMAT_ARGB8888, .depth = 32, .num_planes = 2,
2481 .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, .has_alpha = true, },
2482 { .format = DRM_FORMAT_ABGR8888, .depth = 32, .num_planes = 2,
2483 .cpp = { 4, 1, }, .hsub = 8, .vsub = 16, .has_alpha = true, },
2486 static const struct drm_format_info *
2487 lookup_format_info(const struct drm_format_info formats[],
2488 int num_formats, u32 format)
2492 for (i = 0; i < num_formats; i++) {
2493 if (formats[i].format == format)
2500 static const struct drm_format_info *
2501 intel_get_format_info(const struct drm_mode_fb_cmd2 *cmd)
2503 switch (cmd->modifier[0]) {
2504 case I915_FORMAT_MOD_Y_TILED_CCS:
2505 case I915_FORMAT_MOD_Yf_TILED_CCS:
2506 return lookup_format_info(ccs_formats,
2507 ARRAY_SIZE(ccs_formats),
2514 bool is_ccs_modifier(u64 modifier)
2516 return modifier == I915_FORMAT_MOD_Y_TILED_CCS ||
2517 modifier == I915_FORMAT_MOD_Yf_TILED_CCS;
2520 u32 intel_plane_fb_max_stride(struct drm_i915_private *dev_priv,
2521 u32 pixel_format, u64 modifier)
2523 struct intel_crtc *crtc;
2524 struct intel_plane *plane;
2527 * We assume the primary plane for pipe A has
2528 * the highest stride limits of them all.
2530 crtc = intel_get_crtc_for_pipe(dev_priv, PIPE_A);
2531 plane = to_intel_plane(crtc->base.primary);
2533 return plane->max_stride(plane, pixel_format, modifier,
2538 u32 intel_fb_max_stride(struct drm_i915_private *dev_priv,
2539 u32 pixel_format, u64 modifier)
2542 * Arbitrary limit for gen4+ chosen to match the
2543 * render engine max stride.
2545 * The new CCS hash mode makes remapping impossible
2547 if (!is_ccs_modifier(modifier)) {
2548 if (INTEL_GEN(dev_priv) >= 7)
2550 else if (INTEL_GEN(dev_priv) >= 4)
2554 return intel_plane_fb_max_stride(dev_priv, pixel_format, modifier);
2558 intel_fb_stride_alignment(const struct drm_framebuffer *fb, int color_plane)
2560 struct drm_i915_private *dev_priv = to_i915(fb->dev);
2562 if (fb->modifier == DRM_FORMAT_MOD_LINEAR) {
2563 u32 max_stride = intel_plane_fb_max_stride(dev_priv,
2568 * To make remapping with linear generally feasible
2569 * we need the stride to be page aligned.
2571 if (fb->pitches[color_plane] > max_stride)
2572 return intel_tile_size(dev_priv);
2576 return intel_tile_width_bytes(fb, color_plane);
2580 bool intel_plane_can_remap(const struct intel_plane_state *plane_state)
2582 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
2583 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
2584 const struct drm_framebuffer *fb = plane_state->base.fb;
2587 /* We don't want to deal with remapping with cursors */
2588 if (plane->id == PLANE_CURSOR)
2592 * The display engine limits already match/exceed the
2593 * render engine limits, so not much point in remapping.
2594 * Would also need to deal with the fence POT alignment
2595 * and gen2 2KiB GTT tile size.
2597 if (INTEL_GEN(dev_priv) < 4)
2601 * The new CCS hash mode isn't compatible with remapping as
2602 * the virtual address of the pages affects the compressed data.
2604 if (is_ccs_modifier(fb->modifier))
2607 /* Linear needs a page aligned stride for remapping */
2608 if (fb->modifier == DRM_FORMAT_MOD_LINEAR) {
2609 unsigned int alignment = intel_tile_size(dev_priv) - 1;
2611 for (i = 0; i < fb->format->num_planes; i++) {
2612 if (fb->pitches[i] & alignment)
2620 static bool intel_plane_needs_remap(const struct intel_plane_state *plane_state)
2622 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
2623 const struct drm_framebuffer *fb = plane_state->base.fb;
2624 unsigned int rotation = plane_state->base.rotation;
2625 u32 stride, max_stride;
2628 * No remapping for invisible planes since we don't have
2629 * an actual source viewport to remap.
2631 if (!plane_state->base.visible)
2634 if (!intel_plane_can_remap(plane_state))
2638 * FIXME: aux plane limits on gen9+ are
2639 * unclear in Bspec, for now no checking.
2641 stride = intel_fb_pitch(fb, 0, rotation);
2642 max_stride = plane->max_stride(plane, fb->format->format,
2643 fb->modifier, rotation);
2645 return stride > max_stride;
2649 intel_fill_fb_info(struct drm_i915_private *dev_priv,
2650 struct drm_framebuffer *fb)
2652 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
2653 struct intel_rotation_info *rot_info = &intel_fb->rot_info;
2654 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
2655 u32 gtt_offset_rotated = 0;
2656 unsigned int max_size = 0;
2657 int i, num_planes = fb->format->num_planes;
2658 unsigned int tile_size = intel_tile_size(dev_priv);
2660 for (i = 0; i < num_planes; i++) {
2661 unsigned int width, height;
2662 unsigned int cpp, size;
2667 cpp = fb->format->cpp[i];
2668 width = drm_framebuffer_plane_width(fb->width, fb, i);
2669 height = drm_framebuffer_plane_height(fb->height, fb, i);
2671 ret = intel_fb_offset_to_xy(&x, &y, fb, i);
2673 DRM_DEBUG_KMS("bad fb plane %d offset: 0x%x\n",
2678 if (is_ccs_modifier(fb->modifier) && i == 1) {
2679 int hsub = fb->format->hsub;
2680 int vsub = fb->format->vsub;
2681 int tile_width, tile_height;
2685 intel_tile_dims(fb, i, &tile_width, &tile_height);
2687 tile_height *= vsub;
2689 ccs_x = (x * hsub) % tile_width;
2690 ccs_y = (y * vsub) % tile_height;
2691 main_x = intel_fb->normal[0].x % tile_width;
2692 main_y = intel_fb->normal[0].y % tile_height;
2695 * CCS doesn't have its own x/y offset register, so the intra CCS tile
2696 * x/y offsets must match between CCS and the main surface.
2698 if (main_x != ccs_x || main_y != ccs_y) {
2699 DRM_DEBUG_KMS("Bad CCS x/y (main %d,%d ccs %d,%d) full (main %d,%d ccs %d,%d)\n",
2702 intel_fb->normal[0].x,
2703 intel_fb->normal[0].y,
2710 * The fence (if used) is aligned to the start of the object
2711 * so having the framebuffer wrap around across the edge of the
2712 * fenced region doesn't really work. We have no API to configure
2713 * the fence start offset within the object (nor could we probably
2714 * on gen2/3). So it's just easier if we just require that the
2715 * fb layout agrees with the fence layout. We already check that the
2716 * fb stride matches the fence stride elsewhere.
2718 if (i == 0 && i915_gem_object_is_tiled(obj) &&
2719 (x + width) * cpp > fb->pitches[i]) {
2720 DRM_DEBUG_KMS("bad fb plane %d offset: 0x%x\n",
2726 * First pixel of the framebuffer from
2727 * the start of the normal gtt mapping.
2729 intel_fb->normal[i].x = x;
2730 intel_fb->normal[i].y = y;
2732 offset = intel_compute_aligned_offset(dev_priv, &x, &y, fb, i,
2736 offset /= tile_size;
2738 if (!is_surface_linear(fb->modifier, i)) {
2739 unsigned int tile_width, tile_height;
2740 unsigned int pitch_tiles;
2743 intel_tile_dims(fb, i, &tile_width, &tile_height);
2745 rot_info->plane[i].offset = offset;
2746 rot_info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i], tile_width * cpp);
2747 rot_info->plane[i].width = DIV_ROUND_UP(x + width, tile_width);
2748 rot_info->plane[i].height = DIV_ROUND_UP(y + height, tile_height);
2750 intel_fb->rotated[i].pitch =
2751 rot_info->plane[i].height * tile_height;
2753 /* how many tiles does this plane need */
2754 size = rot_info->plane[i].stride * rot_info->plane[i].height;
2756 * If the plane isn't horizontally tile aligned,
2757 * we need one more tile.
2762 /* rotate the x/y offsets to match the GTT view */
2763 drm_rect_init(&r, x, y, width, height);
2765 rot_info->plane[i].width * tile_width,
2766 rot_info->plane[i].height * tile_height,
2767 DRM_MODE_ROTATE_270);
2771 /* rotate the tile dimensions to match the GTT view */
2772 pitch_tiles = intel_fb->rotated[i].pitch / tile_height;
2773 swap(tile_width, tile_height);
2776 * We only keep the x/y offsets, so push all of the
2777 * gtt offset into the x/y offsets.
2779 intel_adjust_tile_offset(&x, &y,
2780 tile_width, tile_height,
2781 tile_size, pitch_tiles,
2782 gtt_offset_rotated * tile_size, 0);
2784 gtt_offset_rotated += rot_info->plane[i].width * rot_info->plane[i].height;
2787 * First pixel of the framebuffer from
2788 * the start of the rotated gtt mapping.
2790 intel_fb->rotated[i].x = x;
2791 intel_fb->rotated[i].y = y;
2793 size = DIV_ROUND_UP((y + height) * fb->pitches[i] +
2794 x * cpp, tile_size);
2797 /* how many tiles in total needed in the bo */
2798 max_size = max(max_size, offset + size);
2801 if (mul_u32_u32(max_size, tile_size) > obj->base.size) {
2802 DRM_DEBUG_KMS("fb too big for bo (need %llu bytes, have %zu bytes)\n",
2803 mul_u32_u32(max_size, tile_size), obj->base.size);
2811 intel_plane_remap_gtt(struct intel_plane_state *plane_state)
2813 struct drm_i915_private *dev_priv =
2814 to_i915(plane_state->base.plane->dev);
2815 struct drm_framebuffer *fb = plane_state->base.fb;
2816 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
2817 struct intel_rotation_info *info = &plane_state->view.rotated;
2818 unsigned int rotation = plane_state->base.rotation;
2819 int i, num_planes = fb->format->num_planes;
2820 unsigned int tile_size = intel_tile_size(dev_priv);
2821 unsigned int src_x, src_y;
2822 unsigned int src_w, src_h;
2825 memset(&plane_state->view, 0, sizeof(plane_state->view));
2826 plane_state->view.type = drm_rotation_90_or_270(rotation) ?
2827 I915_GGTT_VIEW_ROTATED : I915_GGTT_VIEW_REMAPPED;
2829 src_x = plane_state->base.src.x1 >> 16;
2830 src_y = plane_state->base.src.y1 >> 16;
2831 src_w = drm_rect_width(&plane_state->base.src) >> 16;
2832 src_h = drm_rect_height(&plane_state->base.src) >> 16;
2834 WARN_ON(is_ccs_modifier(fb->modifier));
2836 /* Make src coordinates relative to the viewport */
2837 drm_rect_translate(&plane_state->base.src,
2838 -(src_x << 16), -(src_y << 16));
2840 /* Rotate src coordinates to match rotated GTT view */
2841 if (drm_rotation_90_or_270(rotation))
2842 drm_rect_rotate(&plane_state->base.src,
2843 src_w << 16, src_h << 16,
2844 DRM_MODE_ROTATE_270);
2846 for (i = 0; i < num_planes; i++) {
2847 unsigned int hsub = i ? fb->format->hsub : 1;
2848 unsigned int vsub = i ? fb->format->vsub : 1;
2849 unsigned int cpp = fb->format->cpp[i];
2850 unsigned int tile_width, tile_height;
2851 unsigned int width, height;
2852 unsigned int pitch_tiles;
2856 intel_tile_dims(fb, i, &tile_width, &tile_height);
2860 width = src_w / hsub;
2861 height = src_h / vsub;
2864 * First pixel of the src viewport from the
2865 * start of the normal gtt mapping.
2867 x += intel_fb->normal[i].x;
2868 y += intel_fb->normal[i].y;
2870 offset = intel_compute_aligned_offset(dev_priv, &x, &y,
2871 fb, i, fb->pitches[i],
2872 DRM_MODE_ROTATE_0, tile_size);
2873 offset /= tile_size;
2875 info->plane[i].offset = offset;
2876 info->plane[i].stride = DIV_ROUND_UP(fb->pitches[i],
2878 info->plane[i].width = DIV_ROUND_UP(x + width, tile_width);
2879 info->plane[i].height = DIV_ROUND_UP(y + height, tile_height);
2881 if (drm_rotation_90_or_270(rotation)) {
2884 /* rotate the x/y offsets to match the GTT view */
2885 drm_rect_init(&r, x, y, width, height);
2887 info->plane[i].width * tile_width,
2888 info->plane[i].height * tile_height,
2889 DRM_MODE_ROTATE_270);
2893 pitch_tiles = info->plane[i].height;
2894 plane_state->color_plane[i].stride = pitch_tiles * tile_height;
2896 /* rotate the tile dimensions to match the GTT view */
2897 swap(tile_width, tile_height);
2899 pitch_tiles = info->plane[i].width;
2900 plane_state->color_plane[i].stride = pitch_tiles * tile_width * cpp;
2904 * We only keep the x/y offsets, so push all of the
2905 * gtt offset into the x/y offsets.
2907 intel_adjust_tile_offset(&x, &y,
2908 tile_width, tile_height,
2909 tile_size, pitch_tiles,
2910 gtt_offset * tile_size, 0);
2912 gtt_offset += info->plane[i].width * info->plane[i].height;
2914 plane_state->color_plane[i].offset = 0;
2915 plane_state->color_plane[i].x = x;
2916 plane_state->color_plane[i].y = y;
2921 intel_plane_compute_gtt(struct intel_plane_state *plane_state)
2923 const struct intel_framebuffer *fb =
2924 to_intel_framebuffer(plane_state->base.fb);
2925 unsigned int rotation = plane_state->base.rotation;
2931 num_planes = fb->base.format->num_planes;
2933 if (intel_plane_needs_remap(plane_state)) {
2934 intel_plane_remap_gtt(plane_state);
2937 * Sometimes even remapping can't overcome
2938 * the stride limitations :( Can happen with
2939 * big plane sizes and suitably misaligned
2942 return intel_plane_check_stride(plane_state);
2945 intel_fill_fb_ggtt_view(&plane_state->view, &fb->base, rotation);
2947 for (i = 0; i < num_planes; i++) {
2948 plane_state->color_plane[i].stride = intel_fb_pitch(&fb->base, i, rotation);
2949 plane_state->color_plane[i].offset = 0;
2951 if (drm_rotation_90_or_270(rotation)) {
2952 plane_state->color_plane[i].x = fb->rotated[i].x;
2953 plane_state->color_plane[i].y = fb->rotated[i].y;
2955 plane_state->color_plane[i].x = fb->normal[i].x;
2956 plane_state->color_plane[i].y = fb->normal[i].y;
2960 /* Rotate src coordinates to match rotated GTT view */
2961 if (drm_rotation_90_or_270(rotation))
2962 drm_rect_rotate(&plane_state->base.src,
2963 fb->base.width << 16, fb->base.height << 16,
2964 DRM_MODE_ROTATE_270);
2966 return intel_plane_check_stride(plane_state);
2969 static int i9xx_format_to_fourcc(int format)
2972 case DISPPLANE_8BPP:
2973 return DRM_FORMAT_C8;
2974 case DISPPLANE_BGRX555:
2975 return DRM_FORMAT_XRGB1555;
2976 case DISPPLANE_BGRX565:
2977 return DRM_FORMAT_RGB565;
2979 case DISPPLANE_BGRX888:
2980 return DRM_FORMAT_XRGB8888;
2981 case DISPPLANE_RGBX888:
2982 return DRM_FORMAT_XBGR8888;
2983 case DISPPLANE_BGRX101010:
2984 return DRM_FORMAT_XRGB2101010;
2985 case DISPPLANE_RGBX101010:
2986 return DRM_FORMAT_XBGR2101010;
2987 case DISPPLANE_RGBX161616:
2988 return DRM_FORMAT_XBGR16161616F;
2992 int skl_format_to_fourcc(int format, bool rgb_order, bool alpha)
2995 case PLANE_CTL_FORMAT_RGB_565:
2996 return DRM_FORMAT_RGB565;
2997 case PLANE_CTL_FORMAT_NV12:
2998 return DRM_FORMAT_NV12;
2999 case PLANE_CTL_FORMAT_P010:
3000 return DRM_FORMAT_P010;
3001 case PLANE_CTL_FORMAT_P012:
3002 return DRM_FORMAT_P012;
3003 case PLANE_CTL_FORMAT_P016:
3004 return DRM_FORMAT_P016;
3005 case PLANE_CTL_FORMAT_Y210:
3006 return DRM_FORMAT_Y210;
3007 case PLANE_CTL_FORMAT_Y212:
3008 return DRM_FORMAT_Y212;
3009 case PLANE_CTL_FORMAT_Y216:
3010 return DRM_FORMAT_Y216;
3011 case PLANE_CTL_FORMAT_Y410:
3012 return DRM_FORMAT_XVYU2101010;
3013 case PLANE_CTL_FORMAT_Y412:
3014 return DRM_FORMAT_XVYU12_16161616;
3015 case PLANE_CTL_FORMAT_Y416:
3016 return DRM_FORMAT_XVYU16161616;
3018 case PLANE_CTL_FORMAT_XRGB_8888:
3021 return DRM_FORMAT_ABGR8888;
3023 return DRM_FORMAT_XBGR8888;
3026 return DRM_FORMAT_ARGB8888;
3028 return DRM_FORMAT_XRGB8888;
3030 case PLANE_CTL_FORMAT_XRGB_2101010:
3032 return DRM_FORMAT_XBGR2101010;
3034 return DRM_FORMAT_XRGB2101010;
3035 case PLANE_CTL_FORMAT_XRGB_16161616F:
3038 return DRM_FORMAT_ABGR16161616F;
3040 return DRM_FORMAT_XBGR16161616F;
3043 return DRM_FORMAT_ARGB16161616F;
3045 return DRM_FORMAT_XRGB16161616F;
3051 intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
3052 struct intel_initial_plane_config *plane_config)
3054 struct drm_device *dev = crtc->base.dev;
3055 struct drm_i915_private *dev_priv = to_i915(dev);
3056 struct drm_mode_fb_cmd2 mode_cmd = { 0 };
3057 struct drm_framebuffer *fb = &plane_config->fb->base;
3058 u32 base_aligned = round_down(plane_config->base, PAGE_SIZE);
3059 u32 size_aligned = round_up(plane_config->base + plane_config->size,
3061 struct drm_i915_gem_object *obj;
3064 size_aligned -= base_aligned;
3066 if (plane_config->size == 0)
3069 /* If the FB is too big, just don't use it since fbdev is not very
3070 * important and we should probably use that space with FBC or other
3072 if (size_aligned * 2 > dev_priv->stolen_usable_size)
3075 switch (fb->modifier) {
3076 case DRM_FORMAT_MOD_LINEAR:
3077 case I915_FORMAT_MOD_X_TILED:
3078 case I915_FORMAT_MOD_Y_TILED:
3081 DRM_DEBUG_DRIVER("Unsupported modifier for initial FB: 0x%llx\n",
3086 obj = i915_gem_object_create_stolen_for_preallocated(dev_priv,
3093 switch (plane_config->tiling) {
3094 case I915_TILING_NONE:
3098 obj->tiling_and_stride = fb->pitches[0] | plane_config->tiling;
3101 MISSING_CASE(plane_config->tiling);
3105 mode_cmd.pixel_format = fb->format->format;
3106 mode_cmd.width = fb->width;
3107 mode_cmd.height = fb->height;
3108 mode_cmd.pitches[0] = fb->pitches[0];
3109 mode_cmd.modifier[0] = fb->modifier;
3110 mode_cmd.flags = DRM_MODE_FB_MODIFIERS;
3112 if (intel_framebuffer_init(to_intel_framebuffer(fb), obj, &mode_cmd)) {
3113 DRM_DEBUG_KMS("intel fb init failed\n");
3118 DRM_DEBUG_KMS("initial plane fb obj %p\n", obj);
3121 i915_gem_object_put(obj);
3126 intel_set_plane_visible(struct intel_crtc_state *crtc_state,
3127 struct intel_plane_state *plane_state,
3130 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
3132 plane_state->base.visible = visible;
3135 crtc_state->base.plane_mask |= drm_plane_mask(&plane->base);
3137 crtc_state->base.plane_mask &= ~drm_plane_mask(&plane->base);
3140 static void fixup_active_planes(struct intel_crtc_state *crtc_state)
3142 struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
3143 struct drm_plane *plane;
3146 * Active_planes aliases if multiple "primary" or cursor planes
3147 * have been used on the same (or wrong) pipe. plane_mask uses
3148 * unique ids, hence we can use that to reconstruct active_planes.
3150 crtc_state->active_planes = 0;
3152 drm_for_each_plane_mask(plane, &dev_priv->drm,
3153 crtc_state->base.plane_mask)
3154 crtc_state->active_planes |= BIT(to_intel_plane(plane)->id);
3157 static void intel_plane_disable_noatomic(struct intel_crtc *crtc,
3158 struct intel_plane *plane)
3160 struct intel_crtc_state *crtc_state =
3161 to_intel_crtc_state(crtc->base.state);
3162 struct intel_plane_state *plane_state =
3163 to_intel_plane_state(plane->base.state);
3165 DRM_DEBUG_KMS("Disabling [PLANE:%d:%s] on [CRTC:%d:%s]\n",
3166 plane->base.base.id, plane->base.name,
3167 crtc->base.base.id, crtc->base.name);
3169 intel_set_plane_visible(crtc_state, plane_state, false);
3170 fixup_active_planes(crtc_state);
3171 crtc_state->data_rate[plane->id] = 0;
3172 crtc_state->min_cdclk[plane->id] = 0;
3174 if (plane->id == PLANE_PRIMARY)
3175 intel_pre_disable_primary_noatomic(&crtc->base);
3177 intel_disable_plane(plane, crtc_state);
3180 static struct intel_frontbuffer *
3181 to_intel_frontbuffer(struct drm_framebuffer *fb)
3183 return fb ? to_intel_framebuffer(fb)->frontbuffer : NULL;
3187 intel_find_initial_plane_obj(struct intel_crtc *intel_crtc,
3188 struct intel_initial_plane_config *plane_config)
3190 struct drm_device *dev = intel_crtc->base.dev;
3191 struct drm_i915_private *dev_priv = to_i915(dev);
3193 struct drm_plane *primary = intel_crtc->base.primary;
3194 struct drm_plane_state *plane_state = primary->state;
3195 struct intel_plane *intel_plane = to_intel_plane(primary);
3196 struct intel_plane_state *intel_state =
3197 to_intel_plane_state(plane_state);
3198 struct drm_framebuffer *fb;
3200 if (!plane_config->fb)
3203 if (intel_alloc_initial_plane_obj(intel_crtc, plane_config)) {
3204 fb = &plane_config->fb->base;
3208 kfree(plane_config->fb);
3211 * Failed to alloc the obj, check to see if we should share
3212 * an fb with another CRTC instead
3214 for_each_crtc(dev, c) {
3215 struct intel_plane_state *state;
3217 if (c == &intel_crtc->base)
3220 if (!to_intel_crtc(c)->active)
3223 state = to_intel_plane_state(c->primary->state);
3227 if (intel_plane_ggtt_offset(state) == plane_config->base) {
3228 fb = state->base.fb;
3229 drm_framebuffer_get(fb);
3235 * We've failed to reconstruct the BIOS FB. Current display state
3236 * indicates that the primary plane is visible, but has a NULL FB,
3237 * which will lead to problems later if we don't fix it up. The
3238 * simplest solution is to just disable the primary plane now and
3239 * pretend the BIOS never had it enabled.
3241 intel_plane_disable_noatomic(intel_crtc, intel_plane);
3246 intel_state->base.rotation = plane_config->rotation;
3247 intel_fill_fb_ggtt_view(&intel_state->view, fb,
3248 intel_state->base.rotation);
3249 intel_state->color_plane[0].stride =
3250 intel_fb_pitch(fb, 0, intel_state->base.rotation);
3253 intel_pin_and_fence_fb_obj(fb,
3255 intel_plane_uses_fence(intel_state),
3256 &intel_state->flags);
3257 if (IS_ERR(intel_state->vma)) {
3258 DRM_ERROR("failed to pin boot fb on pipe %d: %li\n",
3259 intel_crtc->pipe, PTR_ERR(intel_state->vma));
3261 intel_state->vma = NULL;
3262 drm_framebuffer_put(fb);
3266 intel_frontbuffer_flush(to_intel_frontbuffer(fb), ORIGIN_DIRTYFB);
3268 plane_state->src_x = 0;
3269 plane_state->src_y = 0;
3270 plane_state->src_w = fb->width << 16;
3271 plane_state->src_h = fb->height << 16;
3273 plane_state->crtc_x = 0;
3274 plane_state->crtc_y = 0;
3275 plane_state->crtc_w = fb->width;
3276 plane_state->crtc_h = fb->height;
3278 intel_state->base.src = drm_plane_state_src(plane_state);
3279 intel_state->base.dst = drm_plane_state_dest(plane_state);
3281 if (plane_config->tiling)
3282 dev_priv->preserve_bios_swizzle = true;
3284 plane_state->fb = fb;
3285 plane_state->crtc = &intel_crtc->base;
3287 atomic_or(to_intel_plane(primary)->frontbuffer_bit,
3288 &to_intel_frontbuffer(fb)->bits);
3291 static int skl_max_plane_width(const struct drm_framebuffer *fb,
3293 unsigned int rotation)
3295 int cpp = fb->format->cpp[color_plane];
3297 switch (fb->modifier) {
3298 case DRM_FORMAT_MOD_LINEAR:
3299 case I915_FORMAT_MOD_X_TILED:
3301 * Validated limit is 4k, but has 5k should
3302 * work apart from the following features:
3303 * - Ytile (already limited to 4k)
3304 * - FP16 (already limited to 4k)
3305 * - render compression (already limited to 4k)
3306 * - KVMR sprite and cursor (don't care)
3307 * - horizontal panning (TODO verify this)
3308 * - pipe and plane scaling (TODO verify this)
3314 case I915_FORMAT_MOD_Y_TILED_CCS:
3315 case I915_FORMAT_MOD_Yf_TILED_CCS:
3316 /* FIXME AUX plane? */
3317 case I915_FORMAT_MOD_Y_TILED:
3318 case I915_FORMAT_MOD_Yf_TILED:
3324 MISSING_CASE(fb->modifier);
3329 static int glk_max_plane_width(const struct drm_framebuffer *fb,
3331 unsigned int rotation)
3333 int cpp = fb->format->cpp[color_plane];
3335 switch (fb->modifier) {
3336 case DRM_FORMAT_MOD_LINEAR:
3337 case I915_FORMAT_MOD_X_TILED:
3342 case I915_FORMAT_MOD_Y_TILED_CCS:
3343 case I915_FORMAT_MOD_Yf_TILED_CCS:
3344 /* FIXME AUX plane? */
3345 case I915_FORMAT_MOD_Y_TILED:
3346 case I915_FORMAT_MOD_Yf_TILED:
3352 MISSING_CASE(fb->modifier);
3357 static int icl_max_plane_width(const struct drm_framebuffer *fb,
3359 unsigned int rotation)
3364 static int skl_max_plane_height(void)
3369 static int icl_max_plane_height(void)
3374 static bool skl_check_main_ccs_coordinates(struct intel_plane_state *plane_state,
3375 int main_x, int main_y, u32 main_offset)
3377 const struct drm_framebuffer *fb = plane_state->base.fb;
3378 int hsub = fb->format->hsub;
3379 int vsub = fb->format->vsub;
3380 int aux_x = plane_state->color_plane[1].x;
3381 int aux_y = plane_state->color_plane[1].y;
3382 u32 aux_offset = plane_state->color_plane[1].offset;
3383 u32 alignment = intel_surf_alignment(fb, 1);
3385 while (aux_offset >= main_offset && aux_y <= main_y) {
3388 if (aux_x == main_x && aux_y == main_y)
3391 if (aux_offset == 0)
3396 aux_offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 1,
3397 aux_offset, aux_offset - alignment);
3398 aux_x = x * hsub + aux_x % hsub;
3399 aux_y = y * vsub + aux_y % vsub;
3402 if (aux_x != main_x || aux_y != main_y)
3405 plane_state->color_plane[1].offset = aux_offset;
3406 plane_state->color_plane[1].x = aux_x;
3407 plane_state->color_plane[1].y = aux_y;
3412 static int skl_check_main_surface(struct intel_plane_state *plane_state)
3414 struct drm_i915_private *dev_priv = to_i915(plane_state->base.plane->dev);
3415 const struct drm_framebuffer *fb = plane_state->base.fb;
3416 unsigned int rotation = plane_state->base.rotation;
3417 int x = plane_state->base.src.x1 >> 16;
3418 int y = plane_state->base.src.y1 >> 16;
3419 int w = drm_rect_width(&plane_state->base.src) >> 16;
3420 int h = drm_rect_height(&plane_state->base.src) >> 16;
3423 u32 alignment, offset, aux_offset = plane_state->color_plane[1].offset;
3425 if (INTEL_GEN(dev_priv) >= 11)
3426 max_width = icl_max_plane_width(fb, 0, rotation);
3427 else if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
3428 max_width = glk_max_plane_width(fb, 0, rotation);
3430 max_width = skl_max_plane_width(fb, 0, rotation);
3432 if (INTEL_GEN(dev_priv) >= 11)
3433 max_height = icl_max_plane_height();
3435 max_height = skl_max_plane_height();
3437 if (w > max_width || h > max_height) {
3438 DRM_DEBUG_KMS("requested Y/RGB source size %dx%d too big (limit %dx%d)\n",
3439 w, h, max_width, max_height);
3443 intel_add_fb_offsets(&x, &y, plane_state, 0);
3444 offset = intel_plane_compute_aligned_offset(&x, &y, plane_state, 0);
3445 alignment = intel_surf_alignment(fb, 0);
3448 * AUX surface offset is specified as the distance from the
3449 * main surface offset, and it must be non-negative. Make
3450 * sure that is what we will get.
3452 if (offset > aux_offset)
3453 offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0,
3454 offset, aux_offset & ~(alignment - 1));
3457 * When using an X-tiled surface, the plane blows up
3458 * if the x offset + width exceed the stride.
3460 * TODO: linear and Y-tiled seem fine, Yf untested,
3462 if (fb->modifier == I915_FORMAT_MOD_X_TILED) {
3463 int cpp = fb->format->cpp[0];
3465 while ((x + w) * cpp > plane_state->color_plane[0].stride) {
3467 DRM_DEBUG_KMS("Unable to find suitable display surface offset due to X-tiling\n");
3471 offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0,
3472 offset, offset - alignment);
3477 * CCS AUX surface doesn't have its own x/y offsets, we must make sure
3478 * they match with the main surface x/y offsets.
3480 if (is_ccs_modifier(fb->modifier)) {
3481 while (!skl_check_main_ccs_coordinates(plane_state, x, y, offset)) {
3485 offset = intel_plane_adjust_aligned_offset(&x, &y, plane_state, 0,
3486 offset, offset - alignment);
3489 if (x != plane_state->color_plane[1].x || y != plane_state->color_plane[1].y) {
3490 DRM_DEBUG_KMS("Unable to find suitable display surface offset due to CCS\n");
3495 plane_state->color_plane[0].offset = offset;
3496 plane_state->color_plane[0].x = x;
3497 plane_state->color_plane[0].y = y;
3500 * Put the final coordinates back so that the src
3501 * coordinate checks will see the right values.
3503 drm_rect_translate_to(&plane_state->base.src,
3509 static int skl_check_nv12_aux_surface(struct intel_plane_state *plane_state)
3511 const struct drm_framebuffer *fb = plane_state->base.fb;
3512 unsigned int rotation = plane_state->base.rotation;
3513 int max_width = skl_max_plane_width(fb, 1, rotation);
3514 int max_height = 4096;
3515 int x = plane_state->base.src.x1 >> 17;
3516 int y = plane_state->base.src.y1 >> 17;
3517 int w = drm_rect_width(&plane_state->base.src) >> 17;
3518 int h = drm_rect_height(&plane_state->base.src) >> 17;
3521 intel_add_fb_offsets(&x, &y, plane_state, 1);
3522 offset = intel_plane_compute_aligned_offset(&x, &y, plane_state, 1);
3524 /* FIXME not quite sure how/if these apply to the chroma plane */
3525 if (w > max_width || h > max_height) {
3526 DRM_DEBUG_KMS("CbCr source size %dx%d too big (limit %dx%d)\n",
3527 w, h, max_width, max_height);
3531 plane_state->color_plane[1].offset = offset;
3532 plane_state->color_plane[1].x = x;
3533 plane_state->color_plane[1].y = y;
3538 static int skl_check_ccs_aux_surface(struct intel_plane_state *plane_state)
3540 const struct drm_framebuffer *fb = plane_state->base.fb;
3541 int src_x = plane_state->base.src.x1 >> 16;
3542 int src_y = plane_state->base.src.y1 >> 16;
3543 int hsub = fb->format->hsub;
3544 int vsub = fb->format->vsub;
3545 int x = src_x / hsub;
3546 int y = src_y / vsub;
3549 intel_add_fb_offsets(&x, &y, plane_state, 1);
3550 offset = intel_plane_compute_aligned_offset(&x, &y, plane_state, 1);
3552 plane_state->color_plane[1].offset = offset;
3553 plane_state->color_plane[1].x = x * hsub + src_x % hsub;
3554 plane_state->color_plane[1].y = y * vsub + src_y % vsub;
3559 int skl_check_plane_surface(struct intel_plane_state *plane_state)
3561 const struct drm_framebuffer *fb = plane_state->base.fb;
3564 ret = intel_plane_compute_gtt(plane_state);
3568 if (!plane_state->base.visible)
3572 * Handle the AUX surface first since
3573 * the main surface setup depends on it.
3575 if (drm_format_info_is_yuv_semiplanar(fb->format)) {
3576 ret = skl_check_nv12_aux_surface(plane_state);
3579 } else if (is_ccs_modifier(fb->modifier)) {
3580 ret = skl_check_ccs_aux_surface(plane_state);
3584 plane_state->color_plane[1].offset = ~0xfff;
3585 plane_state->color_plane[1].x = 0;
3586 plane_state->color_plane[1].y = 0;
3589 ret = skl_check_main_surface(plane_state);
3596 static void i9xx_plane_ratio(const struct intel_crtc_state *crtc_state,
3597 const struct intel_plane_state *plane_state,
3598 unsigned int *num, unsigned int *den)
3600 const struct drm_framebuffer *fb = plane_state->base.fb;
3601 unsigned int cpp = fb->format->cpp[0];
3604 * g4x bspec says 64bpp pixel rate can't exceed 80%
3605 * of cdclk when the sprite plane is enabled on the
3606 * same pipe. ilk/snb bspec says 64bpp pixel rate is
3607 * never allowed to exceed 80% of cdclk. Let's just go
3608 * with the ilk/snb limit always.
3619 static int i9xx_plane_min_cdclk(const struct intel_crtc_state *crtc_state,
3620 const struct intel_plane_state *plane_state)
3622 unsigned int pixel_rate;
3623 unsigned int num, den;
3626 * Note that crtc_state->pixel_rate accounts for both
3627 * horizontal and vertical panel fitter downscaling factors.
3628 * Pre-HSW bspec tells us to only consider the horizontal
3629 * downscaling factor here. We ignore that and just consider
3630 * both for simplicity.
3632 pixel_rate = crtc_state->pixel_rate;
3634 i9xx_plane_ratio(crtc_state, plane_state, &num, &den);
3636 /* two pixels per clock with double wide pipe */
3637 if (crtc_state->double_wide)
3640 return DIV_ROUND_UP(pixel_rate * num, den);
3644 i9xx_plane_max_stride(struct intel_plane *plane,
3645 u32 pixel_format, u64 modifier,
3646 unsigned int rotation)
3648 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
3650 if (!HAS_GMCH(dev_priv)) {
3652 } else if (INTEL_GEN(dev_priv) >= 4) {
3653 if (modifier == I915_FORMAT_MOD_X_TILED)
3657 } else if (INTEL_GEN(dev_priv) >= 3) {
3658 if (modifier == I915_FORMAT_MOD_X_TILED)
3663 if (plane->i9xx_plane == PLANE_C)
3670 static u32 i9xx_plane_ctl_crtc(const struct intel_crtc_state *crtc_state)
3672 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
3673 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
3676 if (crtc_state->gamma_enable)
3677 dspcntr |= DISPPLANE_GAMMA_ENABLE;
3679 if (crtc_state->csc_enable)
3680 dspcntr |= DISPPLANE_PIPE_CSC_ENABLE;
3682 if (INTEL_GEN(dev_priv) < 5)
3683 dspcntr |= DISPPLANE_SEL_PIPE(crtc->pipe);
3688 static u32 i9xx_plane_ctl(const struct intel_crtc_state *crtc_state,
3689 const struct intel_plane_state *plane_state)
3691 struct drm_i915_private *dev_priv =
3692 to_i915(plane_state->base.plane->dev);
3693 const struct drm_framebuffer *fb = plane_state->base.fb;
3694 unsigned int rotation = plane_state->base.rotation;
3697 dspcntr = DISPLAY_PLANE_ENABLE;
3699 if (IS_G4X(dev_priv) || IS_GEN(dev_priv, 5) ||
3700 IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv))
3701 dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
3703 switch (fb->format->format) {
3705 dspcntr |= DISPPLANE_8BPP;
3707 case DRM_FORMAT_XRGB1555:
3708 dspcntr |= DISPPLANE_BGRX555;
3710 case DRM_FORMAT_RGB565:
3711 dspcntr |= DISPPLANE_BGRX565;
3713 case DRM_FORMAT_XRGB8888:
3714 dspcntr |= DISPPLANE_BGRX888;
3716 case DRM_FORMAT_XBGR8888:
3717 dspcntr |= DISPPLANE_RGBX888;
3719 case DRM_FORMAT_XRGB2101010:
3720 dspcntr |= DISPPLANE_BGRX101010;
3722 case DRM_FORMAT_XBGR2101010:
3723 dspcntr |= DISPPLANE_RGBX101010;
3725 case DRM_FORMAT_XBGR16161616F:
3726 dspcntr |= DISPPLANE_RGBX161616;
3729 MISSING_CASE(fb->format->format);
3733 if (INTEL_GEN(dev_priv) >= 4 &&
3734 fb->modifier == I915_FORMAT_MOD_X_TILED)
3735 dspcntr |= DISPPLANE_TILED;
3737 if (rotation & DRM_MODE_ROTATE_180)
3738 dspcntr |= DISPPLANE_ROTATE_180;
3740 if (rotation & DRM_MODE_REFLECT_X)
3741 dspcntr |= DISPPLANE_MIRROR;
3746 int i9xx_check_plane_surface(struct intel_plane_state *plane_state)
3748 struct drm_i915_private *dev_priv =
3749 to_i915(plane_state->base.plane->dev);
3750 const struct drm_framebuffer *fb = plane_state->base.fb;
3751 int src_x, src_y, src_w;
3755 ret = intel_plane_compute_gtt(plane_state);
3759 if (!plane_state->base.visible)
3762 src_w = drm_rect_width(&plane_state->base.src) >> 16;
3763 src_x = plane_state->base.src.x1 >> 16;
3764 src_y = plane_state->base.src.y1 >> 16;
3766 /* Undocumented hardware limit on i965/g4x/vlv/chv */
3767 if (HAS_GMCH(dev_priv) && fb->format->cpp[0] == 8 && src_w > 2048)
3770 intel_add_fb_offsets(&src_x, &src_y, plane_state, 0);
3772 if (INTEL_GEN(dev_priv) >= 4)
3773 offset = intel_plane_compute_aligned_offset(&src_x, &src_y,
3779 * Put the final coordinates back so that the src
3780 * coordinate checks will see the right values.
3782 drm_rect_translate_to(&plane_state->base.src,
3783 src_x << 16, src_y << 16);
3785 /* HSW/BDW do this automagically in hardware */
3786 if (!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv)) {
3787 unsigned int rotation = plane_state->base.rotation;
3788 int src_w = drm_rect_width(&plane_state->base.src) >> 16;
3789 int src_h = drm_rect_height(&plane_state->base.src) >> 16;
3791 if (rotation & DRM_MODE_ROTATE_180) {
3794 } else if (rotation & DRM_MODE_REFLECT_X) {
3799 plane_state->color_plane[0].offset = offset;
3800 plane_state->color_plane[0].x = src_x;
3801 plane_state->color_plane[0].y = src_y;
3806 static bool i9xx_plane_has_windowing(struct intel_plane *plane)
3808 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
3809 enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
3811 if (IS_CHERRYVIEW(dev_priv))
3812 return i9xx_plane == PLANE_B;
3813 else if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
3815 else if (IS_GEN(dev_priv, 4))
3816 return i9xx_plane == PLANE_C;
3818 return i9xx_plane == PLANE_B ||
3819 i9xx_plane == PLANE_C;
3823 i9xx_plane_check(struct intel_crtc_state *crtc_state,
3824 struct intel_plane_state *plane_state)
3826 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
3829 ret = chv_plane_check_rotation(plane_state);
3833 ret = drm_atomic_helper_check_plane_state(&plane_state->base,
3835 DRM_PLANE_HELPER_NO_SCALING,
3836 DRM_PLANE_HELPER_NO_SCALING,
3837 i9xx_plane_has_windowing(plane),
3842 ret = i9xx_check_plane_surface(plane_state);
3846 if (!plane_state->base.visible)
3849 ret = intel_plane_check_src_coordinates(plane_state);
3853 plane_state->ctl = i9xx_plane_ctl(crtc_state, plane_state);
3858 static void i9xx_update_plane(struct intel_plane *plane,
3859 const struct intel_crtc_state *crtc_state,
3860 const struct intel_plane_state *plane_state)
3862 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
3863 enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
3865 int x = plane_state->color_plane[0].x;
3866 int y = plane_state->color_plane[0].y;
3867 int crtc_x = plane_state->base.dst.x1;
3868 int crtc_y = plane_state->base.dst.y1;
3869 int crtc_w = drm_rect_width(&plane_state->base.dst);
3870 int crtc_h = drm_rect_height(&plane_state->base.dst);
3871 unsigned long irqflags;
3875 dspcntr = plane_state->ctl | i9xx_plane_ctl_crtc(crtc_state);
3877 linear_offset = intel_fb_xy_to_linear(x, y, plane_state, 0);
3879 if (INTEL_GEN(dev_priv) >= 4)
3880 dspaddr_offset = plane_state->color_plane[0].offset;
3882 dspaddr_offset = linear_offset;
3884 spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
3886 I915_WRITE_FW(DSPSTRIDE(i9xx_plane), plane_state->color_plane[0].stride);
3888 if (INTEL_GEN(dev_priv) < 4) {
3890 * PLANE_A doesn't actually have a full window
3891 * generator but let's assume we still need to
3892 * program whatever is there.
3894 I915_WRITE_FW(DSPPOS(i9xx_plane), (crtc_y << 16) | crtc_x);
3895 I915_WRITE_FW(DSPSIZE(i9xx_plane),
3896 ((crtc_h - 1) << 16) | (crtc_w - 1));
3897 } else if (IS_CHERRYVIEW(dev_priv) && i9xx_plane == PLANE_B) {
3898 I915_WRITE_FW(PRIMPOS(i9xx_plane), (crtc_y << 16) | crtc_x);
3899 I915_WRITE_FW(PRIMSIZE(i9xx_plane),
3900 ((crtc_h - 1) << 16) | (crtc_w - 1));
3901 I915_WRITE_FW(PRIMCNSTALPHA(i9xx_plane), 0);
3904 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
3905 I915_WRITE_FW(DSPOFFSET(i9xx_plane), (y << 16) | x);
3906 } else if (INTEL_GEN(dev_priv) >= 4) {
3907 I915_WRITE_FW(DSPLINOFF(i9xx_plane), linear_offset);
3908 I915_WRITE_FW(DSPTILEOFF(i9xx_plane), (y << 16) | x);
3912 * The control register self-arms if the plane was previously
3913 * disabled. Try to make the plane enable atomic by writing
3914 * the control register just before the surface register.
3916 I915_WRITE_FW(DSPCNTR(i9xx_plane), dspcntr);
3917 if (INTEL_GEN(dev_priv) >= 4)
3918 I915_WRITE_FW(DSPSURF(i9xx_plane),
3919 intel_plane_ggtt_offset(plane_state) +
3922 I915_WRITE_FW(DSPADDR(i9xx_plane),
3923 intel_plane_ggtt_offset(plane_state) +
3926 spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
3929 static void i9xx_disable_plane(struct intel_plane *plane,
3930 const struct intel_crtc_state *crtc_state)
3932 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
3933 enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
3934 unsigned long irqflags;
3938 * DSPCNTR pipe gamma enable on g4x+ and pipe csc
3939 * enable on ilk+ affect the pipe bottom color as
3940 * well, so we must configure them even if the plane
3943 * On pre-g4x there is no way to gamma correct the
3944 * pipe bottom color but we'll keep on doing this
3945 * anyway so that the crtc state readout works correctly.
3947 dspcntr = i9xx_plane_ctl_crtc(crtc_state);
3949 spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
3951 I915_WRITE_FW(DSPCNTR(i9xx_plane), dspcntr);
3952 if (INTEL_GEN(dev_priv) >= 4)
3953 I915_WRITE_FW(DSPSURF(i9xx_plane), 0);
3955 I915_WRITE_FW(DSPADDR(i9xx_plane), 0);
3957 spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
3960 static bool i9xx_plane_get_hw_state(struct intel_plane *plane,
3963 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
3964 enum intel_display_power_domain power_domain;
3965 enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
3966 intel_wakeref_t wakeref;
3971 * Not 100% correct for planes that can move between pipes,
3972 * but that's only the case for gen2-4 which don't have any
3973 * display power wells.
3975 power_domain = POWER_DOMAIN_PIPE(plane->pipe);
3976 wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
3980 val = I915_READ(DSPCNTR(i9xx_plane));
3982 ret = val & DISPLAY_PLANE_ENABLE;
3984 if (INTEL_GEN(dev_priv) >= 5)
3985 *pipe = plane->pipe;
3987 *pipe = (val & DISPPLANE_SEL_PIPE_MASK) >>
3988 DISPPLANE_SEL_PIPE_SHIFT;
3990 intel_display_power_put(dev_priv, power_domain, wakeref);
3995 static void skl_detach_scaler(struct intel_crtc *intel_crtc, int id)
3997 struct drm_device *dev = intel_crtc->base.dev;
3998 struct drm_i915_private *dev_priv = to_i915(dev);
4000 I915_WRITE(SKL_PS_CTRL(intel_crtc->pipe, id), 0);
4001 I915_WRITE(SKL_PS_WIN_POS(intel_crtc->pipe, id), 0);
4002 I915_WRITE(SKL_PS_WIN_SZ(intel_crtc->pipe, id), 0);
4006 * This function detaches (aka. unbinds) unused scalers in hardware
4008 static void skl_detach_scalers(const struct intel_crtc_state *crtc_state)
4010 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
4011 const struct intel_crtc_scaler_state *scaler_state =
4012 &crtc_state->scaler_state;
4015 /* loop through and disable scalers that aren't in use */
4016 for (i = 0; i < intel_crtc->num_scalers; i++) {
4017 if (!scaler_state->scalers[i].in_use)
4018 skl_detach_scaler(intel_crtc, i);
4022 static unsigned int skl_plane_stride_mult(const struct drm_framebuffer *fb,
4023 int color_plane, unsigned int rotation)
4026 * The stride is either expressed as a multiple of 64 bytes chunks for
4027 * linear buffers or in number of tiles for tiled buffers.
4029 if (fb->modifier == DRM_FORMAT_MOD_LINEAR)
4031 else if (drm_rotation_90_or_270(rotation))
4032 return intel_tile_height(fb, color_plane);
4034 return intel_tile_width_bytes(fb, color_plane);
4037 u32 skl_plane_stride(const struct intel_plane_state *plane_state,
4040 const struct drm_framebuffer *fb = plane_state->base.fb;
4041 unsigned int rotation = plane_state->base.rotation;
4042 u32 stride = plane_state->color_plane[color_plane].stride;
4044 if (color_plane >= fb->format->num_planes)
4047 return stride / skl_plane_stride_mult(fb, color_plane, rotation);
4050 static u32 skl_plane_ctl_format(u32 pixel_format)
4052 switch (pixel_format) {
4054 return PLANE_CTL_FORMAT_INDEXED;
4055 case DRM_FORMAT_RGB565:
4056 return PLANE_CTL_FORMAT_RGB_565;
4057 case DRM_FORMAT_XBGR8888:
4058 case DRM_FORMAT_ABGR8888:
4059 return PLANE_CTL_FORMAT_XRGB_8888 | PLANE_CTL_ORDER_RGBX;
4060 case DRM_FORMAT_XRGB8888:
4061 case DRM_FORMAT_ARGB8888:
4062 return PLANE_CTL_FORMAT_XRGB_8888;
4063 case DRM_FORMAT_XBGR2101010:
4064 return PLANE_CTL_FORMAT_XRGB_2101010 | PLANE_CTL_ORDER_RGBX;
4065 case DRM_FORMAT_XRGB2101010:
4066 return PLANE_CTL_FORMAT_XRGB_2101010;
4067 case DRM_FORMAT_XBGR16161616F:
4068 case DRM_FORMAT_ABGR16161616F:
4069 return PLANE_CTL_FORMAT_XRGB_16161616F | PLANE_CTL_ORDER_RGBX;
4070 case DRM_FORMAT_XRGB16161616F:
4071 case DRM_FORMAT_ARGB16161616F:
4072 return PLANE_CTL_FORMAT_XRGB_16161616F;
4073 case DRM_FORMAT_YUYV:
4074 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YUYV;
4075 case DRM_FORMAT_YVYU:
4076 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_YVYU;
4077 case DRM_FORMAT_UYVY:
4078 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_UYVY;
4079 case DRM_FORMAT_VYUY:
4080 return PLANE_CTL_FORMAT_YUV422 | PLANE_CTL_YUV422_VYUY;
4081 case DRM_FORMAT_NV12:
4082 return PLANE_CTL_FORMAT_NV12;
4083 case DRM_FORMAT_P010:
4084 return PLANE_CTL_FORMAT_P010;
4085 case DRM_FORMAT_P012:
4086 return PLANE_CTL_FORMAT_P012;
4087 case DRM_FORMAT_P016:
4088 return PLANE_CTL_FORMAT_P016;
4089 case DRM_FORMAT_Y210:
4090 return PLANE_CTL_FORMAT_Y210;
4091 case DRM_FORMAT_Y212:
4092 return PLANE_CTL_FORMAT_Y212;
4093 case DRM_FORMAT_Y216:
4094 return PLANE_CTL_FORMAT_Y216;
4095 case DRM_FORMAT_XVYU2101010:
4096 return PLANE_CTL_FORMAT_Y410;
4097 case DRM_FORMAT_XVYU12_16161616:
4098 return PLANE_CTL_FORMAT_Y412;
4099 case DRM_FORMAT_XVYU16161616:
4100 return PLANE_CTL_FORMAT_Y416;
4102 MISSING_CASE(pixel_format);
4108 static u32 skl_plane_ctl_alpha(const struct intel_plane_state *plane_state)
4110 if (!plane_state->base.fb->format->has_alpha)
4111 return PLANE_CTL_ALPHA_DISABLE;
4113 switch (plane_state->base.pixel_blend_mode) {
4114 case DRM_MODE_BLEND_PIXEL_NONE:
4115 return PLANE_CTL_ALPHA_DISABLE;
4116 case DRM_MODE_BLEND_PREMULTI:
4117 return PLANE_CTL_ALPHA_SW_PREMULTIPLY;
4118 case DRM_MODE_BLEND_COVERAGE:
4119 return PLANE_CTL_ALPHA_HW_PREMULTIPLY;
4121 MISSING_CASE(plane_state->base.pixel_blend_mode);
4122 return PLANE_CTL_ALPHA_DISABLE;
4126 static u32 glk_plane_color_ctl_alpha(const struct intel_plane_state *plane_state)
4128 if (!plane_state->base.fb->format->has_alpha)
4129 return PLANE_COLOR_ALPHA_DISABLE;
4131 switch (plane_state->base.pixel_blend_mode) {
4132 case DRM_MODE_BLEND_PIXEL_NONE:
4133 return PLANE_COLOR_ALPHA_DISABLE;
4134 case DRM_MODE_BLEND_PREMULTI:
4135 return PLANE_COLOR_ALPHA_SW_PREMULTIPLY;
4136 case DRM_MODE_BLEND_COVERAGE:
4137 return PLANE_COLOR_ALPHA_HW_PREMULTIPLY;
4139 MISSING_CASE(plane_state->base.pixel_blend_mode);
4140 return PLANE_COLOR_ALPHA_DISABLE;
4144 static u32 skl_plane_ctl_tiling(u64 fb_modifier)
4146 switch (fb_modifier) {
4147 case DRM_FORMAT_MOD_LINEAR:
4149 case I915_FORMAT_MOD_X_TILED:
4150 return PLANE_CTL_TILED_X;
4151 case I915_FORMAT_MOD_Y_TILED:
4152 return PLANE_CTL_TILED_Y;
4153 case I915_FORMAT_MOD_Y_TILED_CCS:
4154 return PLANE_CTL_TILED_Y | PLANE_CTL_RENDER_DECOMPRESSION_ENABLE;
4155 case I915_FORMAT_MOD_Yf_TILED:
4156 return PLANE_CTL_TILED_YF;
4157 case I915_FORMAT_MOD_Yf_TILED_CCS:
4158 return PLANE_CTL_TILED_YF | PLANE_CTL_RENDER_DECOMPRESSION_ENABLE;
4160 MISSING_CASE(fb_modifier);
4166 static u32 skl_plane_ctl_rotate(unsigned int rotate)
4169 case DRM_MODE_ROTATE_0:
4172 * DRM_MODE_ROTATE_ is counter clockwise to stay compatible with Xrandr
4173 * while i915 HW rotation is clockwise, thats why this swapping.
4175 case DRM_MODE_ROTATE_90:
4176 return PLANE_CTL_ROTATE_270;
4177 case DRM_MODE_ROTATE_180:
4178 return PLANE_CTL_ROTATE_180;
4179 case DRM_MODE_ROTATE_270:
4180 return PLANE_CTL_ROTATE_90;
4182 MISSING_CASE(rotate);
4188 static u32 cnl_plane_ctl_flip(unsigned int reflect)
4193 case DRM_MODE_REFLECT_X:
4194 return PLANE_CTL_FLIP_HORIZONTAL;
4195 case DRM_MODE_REFLECT_Y:
4197 MISSING_CASE(reflect);
4203 u32 skl_plane_ctl_crtc(const struct intel_crtc_state *crtc_state)
4205 struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
4208 if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
4211 if (crtc_state->gamma_enable)
4212 plane_ctl |= PLANE_CTL_PIPE_GAMMA_ENABLE;
4214 if (crtc_state->csc_enable)
4215 plane_ctl |= PLANE_CTL_PIPE_CSC_ENABLE;
4220 u32 skl_plane_ctl(const struct intel_crtc_state *crtc_state,
4221 const struct intel_plane_state *plane_state)
4223 struct drm_i915_private *dev_priv =
4224 to_i915(plane_state->base.plane->dev);
4225 const struct drm_framebuffer *fb = plane_state->base.fb;
4226 unsigned int rotation = plane_state->base.rotation;
4227 const struct drm_intel_sprite_colorkey *key = &plane_state->ckey;
4230 plane_ctl = PLANE_CTL_ENABLE;
4232 if (INTEL_GEN(dev_priv) < 10 && !IS_GEMINILAKE(dev_priv)) {
4233 plane_ctl |= skl_plane_ctl_alpha(plane_state);
4234 plane_ctl |= PLANE_CTL_PLANE_GAMMA_DISABLE;
4236 if (plane_state->base.color_encoding == DRM_COLOR_YCBCR_BT709)
4237 plane_ctl |= PLANE_CTL_YUV_TO_RGB_CSC_FORMAT_BT709;
4239 if (plane_state->base.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
4240 plane_ctl |= PLANE_CTL_YUV_RANGE_CORRECTION_DISABLE;
4243 plane_ctl |= skl_plane_ctl_format(fb->format->format);
4244 plane_ctl |= skl_plane_ctl_tiling(fb->modifier);
4245 plane_ctl |= skl_plane_ctl_rotate(rotation & DRM_MODE_ROTATE_MASK);
4247 if (INTEL_GEN(dev_priv) >= 10)
4248 plane_ctl |= cnl_plane_ctl_flip(rotation &
4249 DRM_MODE_REFLECT_MASK);
4251 if (key->flags & I915_SET_COLORKEY_DESTINATION)
4252 plane_ctl |= PLANE_CTL_KEY_ENABLE_DESTINATION;
4253 else if (key->flags & I915_SET_COLORKEY_SOURCE)
4254 plane_ctl |= PLANE_CTL_KEY_ENABLE_SOURCE;
4259 u32 glk_plane_color_ctl_crtc(const struct intel_crtc_state *crtc_state)
4261 struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
4262 u32 plane_color_ctl = 0;
4264 if (INTEL_GEN(dev_priv) >= 11)
4265 return plane_color_ctl;
4267 if (crtc_state->gamma_enable)
4268 plane_color_ctl |= PLANE_COLOR_PIPE_GAMMA_ENABLE;
4270 if (crtc_state->csc_enable)
4271 plane_color_ctl |= PLANE_COLOR_PIPE_CSC_ENABLE;
4273 return plane_color_ctl;
4276 u32 glk_plane_color_ctl(const struct intel_crtc_state *crtc_state,
4277 const struct intel_plane_state *plane_state)
4279 struct drm_i915_private *dev_priv =
4280 to_i915(plane_state->base.plane->dev);
4281 const struct drm_framebuffer *fb = plane_state->base.fb;
4282 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
4283 u32 plane_color_ctl = 0;
4285 plane_color_ctl |= PLANE_COLOR_PLANE_GAMMA_DISABLE;
4286 plane_color_ctl |= glk_plane_color_ctl_alpha(plane_state);
4288 if (fb->format->is_yuv && !icl_is_hdr_plane(dev_priv, plane->id)) {
4289 if (plane_state->base.color_encoding == DRM_COLOR_YCBCR_BT709)
4290 plane_color_ctl |= PLANE_COLOR_CSC_MODE_YUV709_TO_RGB709;
4292 plane_color_ctl |= PLANE_COLOR_CSC_MODE_YUV601_TO_RGB709;
4294 if (plane_state->base.color_range == DRM_COLOR_YCBCR_FULL_RANGE)
4295 plane_color_ctl |= PLANE_COLOR_YUV_RANGE_CORRECTION_DISABLE;
4296 } else if (fb->format->is_yuv) {
4297 plane_color_ctl |= PLANE_COLOR_INPUT_CSC_ENABLE;
4300 return plane_color_ctl;
4304 __intel_display_resume(struct drm_device *dev,
4305 struct drm_atomic_state *state,
4306 struct drm_modeset_acquire_ctx *ctx)
4308 struct drm_crtc_state *crtc_state;
4309 struct drm_crtc *crtc;
4312 intel_modeset_setup_hw_state(dev, ctx);
4313 intel_vga_redisable(to_i915(dev));
4319 * We've duplicated the state, pointers to the old state are invalid.
4321 * Don't attempt to use the old state until we commit the duplicated state.
4323 for_each_new_crtc_in_state(state, crtc, crtc_state, i) {
4325 * Force recalculation even if we restore
4326 * current state. With fast modeset this may not result
4327 * in a modeset when the state is compatible.
4329 crtc_state->mode_changed = true;
4332 /* ignore any reset values/BIOS leftovers in the WM registers */
4333 if (!HAS_GMCH(to_i915(dev)))
4334 to_intel_atomic_state(state)->skip_intermediate_wm = true;
4336 ret = drm_atomic_helper_commit_duplicated_state(state, ctx);
4338 WARN_ON(ret == -EDEADLK);
4342 static bool gpu_reset_clobbers_display(struct drm_i915_private *dev_priv)
4344 return (INTEL_INFO(dev_priv)->gpu_reset_clobbers_display &&
4345 intel_has_gpu_reset(&dev_priv->gt));
4348 void intel_prepare_reset(struct drm_i915_private *dev_priv)
4350 struct drm_device *dev = &dev_priv->drm;
4351 struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx;
4352 struct drm_atomic_state *state;
4355 /* reset doesn't touch the display */
4356 if (!i915_modparams.force_reset_modeset_test &&
4357 !gpu_reset_clobbers_display(dev_priv))
4360 /* We have a modeset vs reset deadlock, defensively unbreak it. */
4361 set_bit(I915_RESET_MODESET, &dev_priv->gt.reset.flags);
4362 smp_mb__after_atomic();
4363 wake_up_bit(&dev_priv->gt.reset.flags, I915_RESET_MODESET);
4365 if (atomic_read(&dev_priv->gpu_error.pending_fb_pin)) {
4366 DRM_DEBUG_KMS("Modeset potentially stuck, unbreaking through wedging\n");
4367 intel_gt_set_wedged(&dev_priv->gt);
4371 * Need mode_config.mutex so that we don't
4372 * trample ongoing ->detect() and whatnot.
4374 mutex_lock(&dev->mode_config.mutex);
4375 drm_modeset_acquire_init(ctx, 0);
4377 ret = drm_modeset_lock_all_ctx(dev, ctx);
4378 if (ret != -EDEADLK)
4381 drm_modeset_backoff(ctx);
4384 * Disabling the crtcs gracefully seems nicer. Also the
4385 * g33 docs say we should at least disable all the planes.
4387 state = drm_atomic_helper_duplicate_state(dev, ctx);
4388 if (IS_ERR(state)) {
4389 ret = PTR_ERR(state);
4390 DRM_ERROR("Duplicating state failed with %i\n", ret);
4394 ret = drm_atomic_helper_disable_all(dev, ctx);
4396 DRM_ERROR("Suspending crtc's failed with %i\n", ret);
4397 drm_atomic_state_put(state);
4401 dev_priv->modeset_restore_state = state;
4402 state->acquire_ctx = ctx;
4405 void intel_finish_reset(struct drm_i915_private *dev_priv)
4407 struct drm_device *dev = &dev_priv->drm;
4408 struct drm_modeset_acquire_ctx *ctx = &dev_priv->reset_ctx;
4409 struct drm_atomic_state *state;
4412 /* reset doesn't touch the display */
4413 if (!test_bit(I915_RESET_MODESET, &dev_priv->gt.reset.flags))
4416 state = fetch_and_zero(&dev_priv->modeset_restore_state);
4420 /* reset doesn't touch the display */
4421 if (!gpu_reset_clobbers_display(dev_priv)) {
4422 /* for testing only restore the display */
4423 ret = __intel_display_resume(dev, state, ctx);
4425 DRM_ERROR("Restoring old state failed with %i\n", ret);
4428 * The display has been reset as well,
4429 * so need a full re-initialization.
4431 intel_pps_unlock_regs_wa(dev_priv);
4432 intel_modeset_init_hw(dev_priv);
4433 intel_init_clock_gating(dev_priv);
4435 spin_lock_irq(&dev_priv->irq_lock);
4436 if (dev_priv->display.hpd_irq_setup)
4437 dev_priv->display.hpd_irq_setup(dev_priv);
4438 spin_unlock_irq(&dev_priv->irq_lock);
4440 ret = __intel_display_resume(dev, state, ctx);
4442 DRM_ERROR("Restoring old state failed with %i\n", ret);
4444 intel_hpd_init(dev_priv);
4447 drm_atomic_state_put(state);
4449 drm_modeset_drop_locks(ctx);
4450 drm_modeset_acquire_fini(ctx);
4451 mutex_unlock(&dev->mode_config.mutex);
4453 clear_bit_unlock(I915_RESET_MODESET, &dev_priv->gt.reset.flags);
4456 static void icl_set_pipe_chicken(struct intel_crtc *crtc)
4458 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
4459 enum pipe pipe = crtc->pipe;
4462 tmp = I915_READ(PIPE_CHICKEN(pipe));
4465 * Display WA #1153: icl
4466 * enable hardware to bypass the alpha math
4467 * and rounding for per-pixel values 00 and 0xff
4469 tmp |= PER_PIXEL_ALPHA_BYPASS_EN;
4471 * Display WA # 1605353570: icl
4472 * Set the pixel rounding bit to 1 for allowing
4473 * passthrough of Frame buffer pixels unmodified
4476 tmp |= PIXEL_ROUNDING_TRUNC_FB_PASSTHRU;
4477 I915_WRITE(PIPE_CHICKEN(pipe), tmp);
4480 static void icl_enable_trans_port_sync(const struct intel_crtc_state *crtc_state)
4482 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
4483 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
4484 u32 trans_ddi_func_ctl2_val;
4488 * Configure the master select and enable Transcoder Port Sync for
4489 * Slave CRTCs transcoder.
4491 if (crtc_state->master_transcoder == INVALID_TRANSCODER)
4494 if (crtc_state->master_transcoder == TRANSCODER_EDP)
4497 master_select = crtc_state->master_transcoder + 1;
4499 /* Set the master select bits for Tranascoder Port Sync */
4500 trans_ddi_func_ctl2_val = (PORT_SYNC_MODE_MASTER_SELECT(master_select) &
4501 PORT_SYNC_MODE_MASTER_SELECT_MASK) <<
4502 PORT_SYNC_MODE_MASTER_SELECT_SHIFT;
4503 /* Enable Transcoder Port Sync */
4504 trans_ddi_func_ctl2_val |= PORT_SYNC_MODE_ENABLE;
4506 I915_WRITE(TRANS_DDI_FUNC_CTL2(crtc_state->cpu_transcoder),
4507 trans_ddi_func_ctl2_val);
4510 static void icl_disable_transcoder_port_sync(const struct intel_crtc_state *old_crtc_state)
4512 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
4513 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
4515 u32 trans_ddi_func_ctl2_val;
4517 if (old_crtc_state->master_transcoder == INVALID_TRANSCODER)
4520 DRM_DEBUG_KMS("Disabling Transcoder Port Sync on Slave Transcoder %s\n",
4521 transcoder_name(old_crtc_state->cpu_transcoder));
4523 reg = TRANS_DDI_FUNC_CTL2(old_crtc_state->cpu_transcoder);
4524 trans_ddi_func_ctl2_val = ~(PORT_SYNC_MODE_ENABLE |
4525 PORT_SYNC_MODE_MASTER_SELECT_MASK);
4526 I915_WRITE(reg, trans_ddi_func_ctl2_val);
4529 static void intel_fdi_normal_train(struct intel_crtc *crtc)
4531 struct drm_device *dev = crtc->base.dev;
4532 struct drm_i915_private *dev_priv = to_i915(dev);
4533 enum pipe pipe = crtc->pipe;
4537 /* enable normal train */
4538 reg = FDI_TX_CTL(pipe);
4539 temp = I915_READ(reg);
4540 if (IS_IVYBRIDGE(dev_priv)) {
4541 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
4542 temp |= FDI_LINK_TRAIN_NONE_IVB | FDI_TX_ENHANCE_FRAME_ENABLE;
4544 temp &= ~FDI_LINK_TRAIN_NONE;
4545 temp |= FDI_LINK_TRAIN_NONE | FDI_TX_ENHANCE_FRAME_ENABLE;
4547 I915_WRITE(reg, temp);
4549 reg = FDI_RX_CTL(pipe);
4550 temp = I915_READ(reg);
4551 if (HAS_PCH_CPT(dev_priv)) {
4552 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
4553 temp |= FDI_LINK_TRAIN_NORMAL_CPT;
4555 temp &= ~FDI_LINK_TRAIN_NONE;
4556 temp |= FDI_LINK_TRAIN_NONE;
4558 I915_WRITE(reg, temp | FDI_RX_ENHANCE_FRAME_ENABLE);
4560 /* wait one idle pattern time */
4564 /* IVB wants error correction enabled */
4565 if (IS_IVYBRIDGE(dev_priv))
4566 I915_WRITE(reg, I915_READ(reg) | FDI_FS_ERRC_ENABLE |
4567 FDI_FE_ERRC_ENABLE);
4570 /* The FDI link training functions for ILK/Ibexpeak. */
4571 static void ironlake_fdi_link_train(struct intel_crtc *crtc,
4572 const struct intel_crtc_state *crtc_state)
4574 struct drm_device *dev = crtc->base.dev;
4575 struct drm_i915_private *dev_priv = to_i915(dev);
4576 enum pipe pipe = crtc->pipe;
4580 /* FDI needs bits from pipe first */
4581 assert_pipe_enabled(dev_priv, pipe);
4583 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
4585 reg = FDI_RX_IMR(pipe);
4586 temp = I915_READ(reg);
4587 temp &= ~FDI_RX_SYMBOL_LOCK;
4588 temp &= ~FDI_RX_BIT_LOCK;
4589 I915_WRITE(reg, temp);
4593 /* enable CPU FDI TX and PCH FDI RX */
4594 reg = FDI_TX_CTL(pipe);
4595 temp = I915_READ(reg);
4596 temp &= ~FDI_DP_PORT_WIDTH_MASK;
4597 temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
4598 temp &= ~FDI_LINK_TRAIN_NONE;
4599 temp |= FDI_LINK_TRAIN_PATTERN_1;
4600 I915_WRITE(reg, temp | FDI_TX_ENABLE);
4602 reg = FDI_RX_CTL(pipe);
4603 temp = I915_READ(reg);
4604 temp &= ~FDI_LINK_TRAIN_NONE;
4605 temp |= FDI_LINK_TRAIN_PATTERN_1;
4606 I915_WRITE(reg, temp | FDI_RX_ENABLE);
4611 /* Ironlake workaround, enable clock pointer after FDI enable*/
4612 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
4613 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR |
4614 FDI_RX_PHASE_SYNC_POINTER_EN);
4616 reg = FDI_RX_IIR(pipe);
4617 for (tries = 0; tries < 5; tries++) {
4618 temp = I915_READ(reg);
4619 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
4621 if ((temp & FDI_RX_BIT_LOCK)) {
4622 DRM_DEBUG_KMS("FDI train 1 done.\n");
4623 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
4628 DRM_ERROR("FDI train 1 fail!\n");
4631 reg = FDI_TX_CTL(pipe);
4632 temp = I915_READ(reg);
4633 temp &= ~FDI_LINK_TRAIN_NONE;
4634 temp |= FDI_LINK_TRAIN_PATTERN_2;
4635 I915_WRITE(reg, temp);
4637 reg = FDI_RX_CTL(pipe);
4638 temp = I915_READ(reg);
4639 temp &= ~FDI_LINK_TRAIN_NONE;
4640 temp |= FDI_LINK_TRAIN_PATTERN_2;
4641 I915_WRITE(reg, temp);
4646 reg = FDI_RX_IIR(pipe);
4647 for (tries = 0; tries < 5; tries++) {
4648 temp = I915_READ(reg);
4649 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
4651 if (temp & FDI_RX_SYMBOL_LOCK) {
4652 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
4653 DRM_DEBUG_KMS("FDI train 2 done.\n");
4658 DRM_ERROR("FDI train 2 fail!\n");
4660 DRM_DEBUG_KMS("FDI train done\n");
4664 static const int snb_b_fdi_train_param[] = {
4665 FDI_LINK_TRAIN_400MV_0DB_SNB_B,
4666 FDI_LINK_TRAIN_400MV_6DB_SNB_B,
4667 FDI_LINK_TRAIN_600MV_3_5DB_SNB_B,
4668 FDI_LINK_TRAIN_800MV_0DB_SNB_B,
4671 /* The FDI link training functions for SNB/Cougarpoint. */
4672 static void gen6_fdi_link_train(struct intel_crtc *crtc,
4673 const struct intel_crtc_state *crtc_state)
4675 struct drm_device *dev = crtc->base.dev;
4676 struct drm_i915_private *dev_priv = to_i915(dev);
4677 enum pipe pipe = crtc->pipe;
4681 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
4683 reg = FDI_RX_IMR(pipe);
4684 temp = I915_READ(reg);
4685 temp &= ~FDI_RX_SYMBOL_LOCK;
4686 temp &= ~FDI_RX_BIT_LOCK;
4687 I915_WRITE(reg, temp);
4692 /* enable CPU FDI TX and PCH FDI RX */
4693 reg = FDI_TX_CTL(pipe);
4694 temp = I915_READ(reg);
4695 temp &= ~FDI_DP_PORT_WIDTH_MASK;
4696 temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
4697 temp &= ~FDI_LINK_TRAIN_NONE;
4698 temp |= FDI_LINK_TRAIN_PATTERN_1;
4699 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
4701 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
4702 I915_WRITE(reg, temp | FDI_TX_ENABLE);
4704 I915_WRITE(FDI_RX_MISC(pipe),
4705 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
4707 reg = FDI_RX_CTL(pipe);
4708 temp = I915_READ(reg);
4709 if (HAS_PCH_CPT(dev_priv)) {
4710 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
4711 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
4713 temp &= ~FDI_LINK_TRAIN_NONE;
4714 temp |= FDI_LINK_TRAIN_PATTERN_1;
4716 I915_WRITE(reg, temp | FDI_RX_ENABLE);
4721 for (i = 0; i < 4; i++) {
4722 reg = FDI_TX_CTL(pipe);
4723 temp = I915_READ(reg);
4724 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
4725 temp |= snb_b_fdi_train_param[i];
4726 I915_WRITE(reg, temp);
4731 for (retry = 0; retry < 5; retry++) {
4732 reg = FDI_RX_IIR(pipe);
4733 temp = I915_READ(reg);
4734 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
4735 if (temp & FDI_RX_BIT_LOCK) {
4736 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
4737 DRM_DEBUG_KMS("FDI train 1 done.\n");
4746 DRM_ERROR("FDI train 1 fail!\n");
4749 reg = FDI_TX_CTL(pipe);
4750 temp = I915_READ(reg);
4751 temp &= ~FDI_LINK_TRAIN_NONE;
4752 temp |= FDI_LINK_TRAIN_PATTERN_2;
4753 if (IS_GEN(dev_priv, 6)) {
4754 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
4756 temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
4758 I915_WRITE(reg, temp);
4760 reg = FDI_RX_CTL(pipe);
4761 temp = I915_READ(reg);
4762 if (HAS_PCH_CPT(dev_priv)) {
4763 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
4764 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
4766 temp &= ~FDI_LINK_TRAIN_NONE;
4767 temp |= FDI_LINK_TRAIN_PATTERN_2;
4769 I915_WRITE(reg, temp);
4774 for (i = 0; i < 4; i++) {
4775 reg = FDI_TX_CTL(pipe);
4776 temp = I915_READ(reg);
4777 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
4778 temp |= snb_b_fdi_train_param[i];
4779 I915_WRITE(reg, temp);
4784 for (retry = 0; retry < 5; retry++) {
4785 reg = FDI_RX_IIR(pipe);
4786 temp = I915_READ(reg);
4787 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
4788 if (temp & FDI_RX_SYMBOL_LOCK) {
4789 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
4790 DRM_DEBUG_KMS("FDI train 2 done.\n");
4799 DRM_ERROR("FDI train 2 fail!\n");
4801 DRM_DEBUG_KMS("FDI train done.\n");
4804 /* Manual link training for Ivy Bridge A0 parts */
4805 static void ivb_manual_fdi_link_train(struct intel_crtc *crtc,
4806 const struct intel_crtc_state *crtc_state)
4808 struct drm_device *dev = crtc->base.dev;
4809 struct drm_i915_private *dev_priv = to_i915(dev);
4810 enum pipe pipe = crtc->pipe;
4814 /* Train 1: umask FDI RX Interrupt symbol_lock and bit_lock bit
4816 reg = FDI_RX_IMR(pipe);
4817 temp = I915_READ(reg);
4818 temp &= ~FDI_RX_SYMBOL_LOCK;
4819 temp &= ~FDI_RX_BIT_LOCK;
4820 I915_WRITE(reg, temp);
4825 DRM_DEBUG_KMS("FDI_RX_IIR before link train 0x%x\n",
4826 I915_READ(FDI_RX_IIR(pipe)));
4828 /* Try each vswing and preemphasis setting twice before moving on */
4829 for (j = 0; j < ARRAY_SIZE(snb_b_fdi_train_param) * 2; j++) {
4830 /* disable first in case we need to retry */
4831 reg = FDI_TX_CTL(pipe);
4832 temp = I915_READ(reg);
4833 temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB);
4834 temp &= ~FDI_TX_ENABLE;
4835 I915_WRITE(reg, temp);
4837 reg = FDI_RX_CTL(pipe);
4838 temp = I915_READ(reg);
4839 temp &= ~FDI_LINK_TRAIN_AUTO;
4840 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
4841 temp &= ~FDI_RX_ENABLE;
4842 I915_WRITE(reg, temp);
4844 /* enable CPU FDI TX and PCH FDI RX */
4845 reg = FDI_TX_CTL(pipe);
4846 temp = I915_READ(reg);
4847 temp &= ~FDI_DP_PORT_WIDTH_MASK;
4848 temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
4849 temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
4850 temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
4851 temp |= snb_b_fdi_train_param[j/2];
4852 temp |= FDI_COMPOSITE_SYNC;
4853 I915_WRITE(reg, temp | FDI_TX_ENABLE);
4855 I915_WRITE(FDI_RX_MISC(pipe),
4856 FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
4858 reg = FDI_RX_CTL(pipe);
4859 temp = I915_READ(reg);
4860 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
4861 temp |= FDI_COMPOSITE_SYNC;
4862 I915_WRITE(reg, temp | FDI_RX_ENABLE);
4865 udelay(1); /* should be 0.5us */
4867 for (i = 0; i < 4; i++) {
4868 reg = FDI_RX_IIR(pipe);
4869 temp = I915_READ(reg);
4870 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
4872 if (temp & FDI_RX_BIT_LOCK ||
4873 (I915_READ(reg) & FDI_RX_BIT_LOCK)) {
4874 I915_WRITE(reg, temp | FDI_RX_BIT_LOCK);
4875 DRM_DEBUG_KMS("FDI train 1 done, level %i.\n",
4879 udelay(1); /* should be 0.5us */
4882 DRM_DEBUG_KMS("FDI train 1 fail on vswing %d\n", j / 2);
4887 reg = FDI_TX_CTL(pipe);
4888 temp = I915_READ(reg);
4889 temp &= ~FDI_LINK_TRAIN_NONE_IVB;
4890 temp |= FDI_LINK_TRAIN_PATTERN_2_IVB;
4891 I915_WRITE(reg, temp);
4893 reg = FDI_RX_CTL(pipe);
4894 temp = I915_READ(reg);
4895 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
4896 temp |= FDI_LINK_TRAIN_PATTERN_2_CPT;
4897 I915_WRITE(reg, temp);
4900 udelay(2); /* should be 1.5us */
4902 for (i = 0; i < 4; i++) {
4903 reg = FDI_RX_IIR(pipe);
4904 temp = I915_READ(reg);
4905 DRM_DEBUG_KMS("FDI_RX_IIR 0x%x\n", temp);
4907 if (temp & FDI_RX_SYMBOL_LOCK ||
4908 (I915_READ(reg) & FDI_RX_SYMBOL_LOCK)) {
4909 I915_WRITE(reg, temp | FDI_RX_SYMBOL_LOCK);
4910 DRM_DEBUG_KMS("FDI train 2 done, level %i.\n",
4914 udelay(2); /* should be 1.5us */
4917 DRM_DEBUG_KMS("FDI train 2 fail on vswing %d\n", j / 2);
4921 DRM_DEBUG_KMS("FDI train done.\n");
4924 static void ironlake_fdi_pll_enable(const struct intel_crtc_state *crtc_state)
4926 struct intel_crtc *intel_crtc = to_intel_crtc(crtc_state->base.crtc);
4927 struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
4928 enum pipe pipe = intel_crtc->pipe;
4932 /* enable PCH FDI RX PLL, wait warmup plus DMI latency */
4933 reg = FDI_RX_CTL(pipe);
4934 temp = I915_READ(reg);
4935 temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16));
4936 temp |= FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
4937 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
4938 I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE);
4943 /* Switch from Rawclk to PCDclk */
4944 temp = I915_READ(reg);
4945 I915_WRITE(reg, temp | FDI_PCDCLK);
4950 /* Enable CPU FDI TX PLL, always on for Ironlake */
4951 reg = FDI_TX_CTL(pipe);
4952 temp = I915_READ(reg);
4953 if ((temp & FDI_TX_PLL_ENABLE) == 0) {
4954 I915_WRITE(reg, temp | FDI_TX_PLL_ENABLE);
4961 static void ironlake_fdi_pll_disable(struct intel_crtc *intel_crtc)
4963 struct drm_device *dev = intel_crtc->base.dev;
4964 struct drm_i915_private *dev_priv = to_i915(dev);
4965 enum pipe pipe = intel_crtc->pipe;
4969 /* Switch from PCDclk to Rawclk */
4970 reg = FDI_RX_CTL(pipe);
4971 temp = I915_READ(reg);
4972 I915_WRITE(reg, temp & ~FDI_PCDCLK);
4974 /* Disable CPU FDI TX PLL */
4975 reg = FDI_TX_CTL(pipe);
4976 temp = I915_READ(reg);
4977 I915_WRITE(reg, temp & ~FDI_TX_PLL_ENABLE);
4982 reg = FDI_RX_CTL(pipe);
4983 temp = I915_READ(reg);
4984 I915_WRITE(reg, temp & ~FDI_RX_PLL_ENABLE);
4986 /* Wait for the clocks to turn off. */
4991 static void ironlake_fdi_disable(struct drm_crtc *crtc)
4993 struct drm_device *dev = crtc->dev;
4994 struct drm_i915_private *dev_priv = to_i915(dev);
4995 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
4996 enum pipe pipe = intel_crtc->pipe;
5000 /* disable CPU FDI tx and PCH FDI rx */
5001 reg = FDI_TX_CTL(pipe);
5002 temp = I915_READ(reg);
5003 I915_WRITE(reg, temp & ~FDI_TX_ENABLE);
5006 reg = FDI_RX_CTL(pipe);
5007 temp = I915_READ(reg);
5008 temp &= ~(0x7 << 16);
5009 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
5010 I915_WRITE(reg, temp & ~FDI_RX_ENABLE);
5015 /* Ironlake workaround, disable clock pointer after downing FDI */
5016 if (HAS_PCH_IBX(dev_priv))
5017 I915_WRITE(FDI_RX_CHICKEN(pipe), FDI_RX_PHASE_SYNC_POINTER_OVR);
5019 /* still set train pattern 1 */
5020 reg = FDI_TX_CTL(pipe);
5021 temp = I915_READ(reg);
5022 temp &= ~FDI_LINK_TRAIN_NONE;
5023 temp |= FDI_LINK_TRAIN_PATTERN_1;
5024 I915_WRITE(reg, temp);
5026 reg = FDI_RX_CTL(pipe);
5027 temp = I915_READ(reg);
5028 if (HAS_PCH_CPT(dev_priv)) {
5029 temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
5030 temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
5032 temp &= ~FDI_LINK_TRAIN_NONE;
5033 temp |= FDI_LINK_TRAIN_PATTERN_1;
5035 /* BPC in FDI rx is consistent with that in PIPECONF */
5036 temp &= ~(0x07 << 16);
5037 temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11;
5038 I915_WRITE(reg, temp);
5044 bool intel_has_pending_fb_unpin(struct drm_i915_private *dev_priv)
5046 struct drm_crtc *crtc;
5049 drm_for_each_crtc(crtc, &dev_priv->drm) {
5050 struct drm_crtc_commit *commit;
5051 spin_lock(&crtc->commit_lock);
5052 commit = list_first_entry_or_null(&crtc->commit_list,
5053 struct drm_crtc_commit, commit_entry);
5054 cleanup_done = commit ?
5055 try_wait_for_completion(&commit->cleanup_done) : true;
5056 spin_unlock(&crtc->commit_lock);
5061 drm_crtc_wait_one_vblank(crtc);
5069 void lpt_disable_iclkip(struct drm_i915_private *dev_priv)
5073 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_GATE);
5075 mutex_lock(&dev_priv->sb_lock);
5077 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
5078 temp |= SBI_SSCCTL_DISABLE;
5079 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
5081 mutex_unlock(&dev_priv->sb_lock);
5084 /* Program iCLKIP clock to the desired frequency */
5085 static void lpt_program_iclkip(const struct intel_crtc_state *crtc_state)
5087 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
5088 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
5089 int clock = crtc_state->base.adjusted_mode.crtc_clock;
5090 u32 divsel, phaseinc, auxdiv, phasedir = 0;
5093 lpt_disable_iclkip(dev_priv);
5095 /* The iCLK virtual clock root frequency is in MHz,
5096 * but the adjusted_mode->crtc_clock in in KHz. To get the
5097 * divisors, it is necessary to divide one by another, so we
5098 * convert the virtual clock precision to KHz here for higher
5101 for (auxdiv = 0; auxdiv < 2; auxdiv++) {
5102 u32 iclk_virtual_root_freq = 172800 * 1000;
5103 u32 iclk_pi_range = 64;
5104 u32 desired_divisor;
5106 desired_divisor = DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
5108 divsel = (desired_divisor / iclk_pi_range) - 2;
5109 phaseinc = desired_divisor % iclk_pi_range;
5112 * Near 20MHz is a corner case which is
5113 * out of range for the 7-bit divisor
5119 /* This should not happen with any sane values */
5120 WARN_ON(SBI_SSCDIVINTPHASE_DIVSEL(divsel) &
5121 ~SBI_SSCDIVINTPHASE_DIVSEL_MASK);
5122 WARN_ON(SBI_SSCDIVINTPHASE_DIR(phasedir) &
5123 ~SBI_SSCDIVINTPHASE_INCVAL_MASK);
5125 DRM_DEBUG_KMS("iCLKIP clock: found settings for %dKHz refresh rate: auxdiv=%x, divsel=%x, phasedir=%x, phaseinc=%x\n",
5132 mutex_lock(&dev_priv->sb_lock);
5134 /* Program SSCDIVINTPHASE6 */
5135 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
5136 temp &= ~SBI_SSCDIVINTPHASE_DIVSEL_MASK;
5137 temp |= SBI_SSCDIVINTPHASE_DIVSEL(divsel);
5138 temp &= ~SBI_SSCDIVINTPHASE_INCVAL_MASK;
5139 temp |= SBI_SSCDIVINTPHASE_INCVAL(phaseinc);
5140 temp |= SBI_SSCDIVINTPHASE_DIR(phasedir);
5141 temp |= SBI_SSCDIVINTPHASE_PROPAGATE;
5142 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE6, temp, SBI_ICLK);
5144 /* Program SSCAUXDIV */
5145 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
5146 temp &= ~SBI_SSCAUXDIV_FINALDIV2SEL(1);
5147 temp |= SBI_SSCAUXDIV_FINALDIV2SEL(auxdiv);
5148 intel_sbi_write(dev_priv, SBI_SSCAUXDIV6, temp, SBI_ICLK);
5150 /* Enable modulator and associated divider */
5151 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
5152 temp &= ~SBI_SSCCTL_DISABLE;
5153 intel_sbi_write(dev_priv, SBI_SSCCTL6, temp, SBI_ICLK);
5155 mutex_unlock(&dev_priv->sb_lock);
5157 /* Wait for initialization time */
5160 I915_WRITE(PIXCLK_GATE, PIXCLK_GATE_UNGATE);
5163 int lpt_get_iclkip(struct drm_i915_private *dev_priv)
5165 u32 divsel, phaseinc, auxdiv;
5166 u32 iclk_virtual_root_freq = 172800 * 1000;
5167 u32 iclk_pi_range = 64;
5168 u32 desired_divisor;
5171 if ((I915_READ(PIXCLK_GATE) & PIXCLK_GATE_UNGATE) == 0)
5174 mutex_lock(&dev_priv->sb_lock);
5176 temp = intel_sbi_read(dev_priv, SBI_SSCCTL6, SBI_ICLK);
5177 if (temp & SBI_SSCCTL_DISABLE) {
5178 mutex_unlock(&dev_priv->sb_lock);
5182 temp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE6, SBI_ICLK);
5183 divsel = (temp & SBI_SSCDIVINTPHASE_DIVSEL_MASK) >>
5184 SBI_SSCDIVINTPHASE_DIVSEL_SHIFT;
5185 phaseinc = (temp & SBI_SSCDIVINTPHASE_INCVAL_MASK) >>
5186 SBI_SSCDIVINTPHASE_INCVAL_SHIFT;
5188 temp = intel_sbi_read(dev_priv, SBI_SSCAUXDIV6, SBI_ICLK);
5189 auxdiv = (temp & SBI_SSCAUXDIV_FINALDIV2SEL_MASK) >>
5190 SBI_SSCAUXDIV_FINALDIV2SEL_SHIFT;
5192 mutex_unlock(&dev_priv->sb_lock);
5194 desired_divisor = (divsel + 2) * iclk_pi_range + phaseinc;
5196 return DIV_ROUND_CLOSEST(iclk_virtual_root_freq,
5197 desired_divisor << auxdiv);
5200 static void ironlake_pch_transcoder_set_timings(const struct intel_crtc_state *crtc_state,
5201 enum pipe pch_transcoder)
5203 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
5204 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
5205 enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
5207 I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder),
5208 I915_READ(HTOTAL(cpu_transcoder)));
5209 I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder),
5210 I915_READ(HBLANK(cpu_transcoder)));
5211 I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder),
5212 I915_READ(HSYNC(cpu_transcoder)));
5214 I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder),
5215 I915_READ(VTOTAL(cpu_transcoder)));
5216 I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder),
5217 I915_READ(VBLANK(cpu_transcoder)));
5218 I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder),
5219 I915_READ(VSYNC(cpu_transcoder)));
5220 I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder),
5221 I915_READ(VSYNCSHIFT(cpu_transcoder)));
5224 static void cpt_set_fdi_bc_bifurcation(struct drm_i915_private *dev_priv, bool enable)
5228 temp = I915_READ(SOUTH_CHICKEN1);
5229 if (!!(temp & FDI_BC_BIFURCATION_SELECT) == enable)
5232 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE);
5233 WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE);
5235 temp &= ~FDI_BC_BIFURCATION_SELECT;
5237 temp |= FDI_BC_BIFURCATION_SELECT;
5239 DRM_DEBUG_KMS("%sabling fdi C rx\n", enable ? "en" : "dis");
5240 I915_WRITE(SOUTH_CHICKEN1, temp);
5241 POSTING_READ(SOUTH_CHICKEN1);
5244 static void ivybridge_update_fdi_bc_bifurcation(const struct intel_crtc_state *crtc_state)
5246 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
5247 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
5249 switch (crtc->pipe) {
5253 if (crtc_state->fdi_lanes > 2)
5254 cpt_set_fdi_bc_bifurcation(dev_priv, false);
5256 cpt_set_fdi_bc_bifurcation(dev_priv, true);
5260 cpt_set_fdi_bc_bifurcation(dev_priv, true);
5269 * Finds the encoder associated with the given CRTC. This can only be
5270 * used when we know that the CRTC isn't feeding multiple encoders!
5272 static struct intel_encoder *
5273 intel_get_crtc_new_encoder(const struct intel_atomic_state *state,
5274 const struct intel_crtc_state *crtc_state)
5276 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
5277 const struct drm_connector_state *connector_state;
5278 const struct drm_connector *connector;
5279 struct intel_encoder *encoder = NULL;
5280 int num_encoders = 0;
5283 for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
5284 if (connector_state->crtc != &crtc->base)
5287 encoder = to_intel_encoder(connector_state->best_encoder);
5291 WARN(num_encoders != 1, "%d encoders for pipe %c\n",
5292 num_encoders, pipe_name(crtc->pipe));
5298 * Enable PCH resources required for PCH ports:
5300 * - FDI training & RX/TX
5301 * - update transcoder timings
5302 * - DP transcoding bits
5305 static void ironlake_pch_enable(const struct intel_atomic_state *state,
5306 const struct intel_crtc_state *crtc_state)
5308 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
5309 struct drm_device *dev = crtc->base.dev;
5310 struct drm_i915_private *dev_priv = to_i915(dev);
5311 enum pipe pipe = crtc->pipe;
5314 assert_pch_transcoder_disabled(dev_priv, pipe);
5316 if (IS_IVYBRIDGE(dev_priv))
5317 ivybridge_update_fdi_bc_bifurcation(crtc_state);
5319 /* Write the TU size bits before fdi link training, so that error
5320 * detection works. */
5321 I915_WRITE(FDI_RX_TUSIZE1(pipe),
5322 I915_READ(PIPE_DATA_M1(pipe)) & TU_SIZE_MASK);
5324 /* For PCH output, training FDI link */
5325 dev_priv->display.fdi_link_train(crtc, crtc_state);
5327 /* We need to program the right clock selection before writing the pixel
5328 * mutliplier into the DPLL. */
5329 if (HAS_PCH_CPT(dev_priv)) {
5332 temp = I915_READ(PCH_DPLL_SEL);
5333 temp |= TRANS_DPLL_ENABLE(pipe);
5334 sel = TRANS_DPLLB_SEL(pipe);
5335 if (crtc_state->shared_dpll ==
5336 intel_get_shared_dpll_by_id(dev_priv, DPLL_ID_PCH_PLL_B))
5340 I915_WRITE(PCH_DPLL_SEL, temp);
5343 /* XXX: pch pll's can be enabled any time before we enable the PCH
5344 * transcoder, and we actually should do this to not upset any PCH
5345 * transcoder that already use the clock when we share it.
5347 * Note that enable_shared_dpll tries to do the right thing, but
5348 * get_shared_dpll unconditionally resets the pll - we need that to have
5349 * the right LVDS enable sequence. */
5350 intel_enable_shared_dpll(crtc_state);
5352 /* set transcoder timing, panel must allow it */
5353 assert_panel_unlocked(dev_priv, pipe);
5354 ironlake_pch_transcoder_set_timings(crtc_state, pipe);
5356 intel_fdi_normal_train(crtc);
5358 /* For PCH DP, enable TRANS_DP_CTL */
5359 if (HAS_PCH_CPT(dev_priv) &&
5360 intel_crtc_has_dp_encoder(crtc_state)) {
5361 const struct drm_display_mode *adjusted_mode =
5362 &crtc_state->base.adjusted_mode;
5363 u32 bpc = (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) >> 5;
5364 i915_reg_t reg = TRANS_DP_CTL(pipe);
5367 temp = I915_READ(reg);
5368 temp &= ~(TRANS_DP_PORT_SEL_MASK |
5369 TRANS_DP_SYNC_MASK |
5371 temp |= TRANS_DP_OUTPUT_ENABLE;
5372 temp |= bpc << 9; /* same format but at 11:9 */
5374 if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
5375 temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
5376 if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
5377 temp |= TRANS_DP_VSYNC_ACTIVE_HIGH;
5379 port = intel_get_crtc_new_encoder(state, crtc_state)->port;
5380 WARN_ON(port < PORT_B || port > PORT_D);
5381 temp |= TRANS_DP_PORT_SEL(port);
5383 I915_WRITE(reg, temp);
5386 ironlake_enable_pch_transcoder(crtc_state);
5389 static void lpt_pch_enable(const struct intel_atomic_state *state,
5390 const struct intel_crtc_state *crtc_state)
5392 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
5393 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
5394 enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
5396 assert_pch_transcoder_disabled(dev_priv, PIPE_A);
5398 lpt_program_iclkip(crtc_state);
5400 /* Set transcoder timing. */
5401 ironlake_pch_transcoder_set_timings(crtc_state, PIPE_A);
5403 lpt_enable_pch_transcoder(dev_priv, cpu_transcoder);
5406 static void cpt_verify_modeset(struct drm_device *dev, enum pipe pipe)
5408 struct drm_i915_private *dev_priv = to_i915(dev);
5409 i915_reg_t dslreg = PIPEDSL(pipe);
5412 temp = I915_READ(dslreg);
5414 if (wait_for(I915_READ(dslreg) != temp, 5)) {
5415 if (wait_for(I915_READ(dslreg) != temp, 5))
5416 DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe));
5421 * The hardware phase 0.0 refers to the center of the pixel.
5422 * We want to start from the top/left edge which is phase
5423 * -0.5. That matches how the hardware calculates the scaling
5424 * factors (from top-left of the first pixel to bottom-right
5425 * of the last pixel, as opposed to the pixel centers).
5427 * For 4:2:0 subsampled chroma planes we obviously have to
5428 * adjust that so that the chroma sample position lands in
5431 * Note that for packed YCbCr 4:2:2 formats there is no way to
5432 * control chroma siting. The hardware simply replicates the
5433 * chroma samples for both of the luma samples, and thus we don't
5434 * actually get the expected MPEG2 chroma siting convention :(
5435 * The same behaviour is observed on pre-SKL platforms as well.
5437 * Theory behind the formula (note that we ignore sub-pixel
5438 * source coordinates):
5439 * s = source sample position
5440 * d = destination sample position
5445 * | | 1.5 (initial phase)
5453 * | -0.375 (initial phase)
5460 u16 skl_scaler_calc_phase(int sub, int scale, bool chroma_cosited)
5462 int phase = -0x8000;
5466 phase += (sub - 1) * 0x8000 / sub;
5468 phase += scale / (2 * sub);
5471 * Hardware initial phase limited to [-0.5:1.5].
5472 * Since the max hardware scale factor is 3.0, we
5473 * should never actually excdeed 1.0 here.
5475 WARN_ON(phase < -0x8000 || phase > 0x18000);
5478 phase = 0x10000 + phase;
5480 trip = PS_PHASE_TRIP;
5482 return ((phase >> 2) & PS_PHASE_MASK) | trip;
5485 #define SKL_MIN_SRC_W 8
5486 #define SKL_MAX_SRC_W 4096
5487 #define SKL_MIN_SRC_H 8
5488 #define SKL_MAX_SRC_H 4096
5489 #define SKL_MIN_DST_W 8
5490 #define SKL_MAX_DST_W 4096
5491 #define SKL_MIN_DST_H 8
5492 #define SKL_MAX_DST_H 4096
5493 #define ICL_MAX_SRC_W 5120
5494 #define ICL_MAX_SRC_H 4096
5495 #define ICL_MAX_DST_W 5120
5496 #define ICL_MAX_DST_H 4096
5497 #define SKL_MIN_YUV_420_SRC_W 16
5498 #define SKL_MIN_YUV_420_SRC_H 16
5501 skl_update_scaler(struct intel_crtc_state *crtc_state, bool force_detach,
5502 unsigned int scaler_user, int *scaler_id,
5503 int src_w, int src_h, int dst_w, int dst_h,
5504 const struct drm_format_info *format, bool need_scaler)
5506 struct intel_crtc_scaler_state *scaler_state =
5507 &crtc_state->scaler_state;
5508 struct intel_crtc *intel_crtc =
5509 to_intel_crtc(crtc_state->base.crtc);
5510 struct drm_i915_private *dev_priv = to_i915(intel_crtc->base.dev);
5511 const struct drm_display_mode *adjusted_mode =
5512 &crtc_state->base.adjusted_mode;
5515 * Src coordinates are already rotated by 270 degrees for
5516 * the 90/270 degree plane rotation cases (to match the
5517 * GTT mapping), hence no need to account for rotation here.
5519 if (src_w != dst_w || src_h != dst_h)
5523 * Scaling/fitting not supported in IF-ID mode in GEN9+
5524 * TODO: Interlace fetch mode doesn't support YUV420 planar formats.
5525 * Once NV12 is enabled, handle it here while allocating scaler
5528 if (INTEL_GEN(dev_priv) >= 9 && crtc_state->base.enable &&
5529 need_scaler && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
5530 DRM_DEBUG_KMS("Pipe/Plane scaling not supported with IF-ID mode\n");
5535 * if plane is being disabled or scaler is no more required or force detach
5536 * - free scaler binded to this plane/crtc
5537 * - in order to do this, update crtc->scaler_usage
5539 * Here scaler state in crtc_state is set free so that
5540 * scaler can be assigned to other user. Actual register
5541 * update to free the scaler is done in plane/panel-fit programming.
5542 * For this purpose crtc/plane_state->scaler_id isn't reset here.
5544 if (force_detach || !need_scaler) {
5545 if (*scaler_id >= 0) {
5546 scaler_state->scaler_users &= ~(1 << scaler_user);
5547 scaler_state->scalers[*scaler_id].in_use = 0;
5549 DRM_DEBUG_KMS("scaler_user index %u.%u: "
5550 "Staged freeing scaler id %d scaler_users = 0x%x\n",
5551 intel_crtc->pipe, scaler_user, *scaler_id,
5552 scaler_state->scaler_users);
5558 if (format && drm_format_info_is_yuv_semiplanar(format) &&
5559 (src_h < SKL_MIN_YUV_420_SRC_H || src_w < SKL_MIN_YUV_420_SRC_W)) {
5560 DRM_DEBUG_KMS("Planar YUV: src dimensions not met\n");
5565 if (src_w < SKL_MIN_SRC_W || src_h < SKL_MIN_SRC_H ||
5566 dst_w < SKL_MIN_DST_W || dst_h < SKL_MIN_DST_H ||
5567 (INTEL_GEN(dev_priv) >= 11 &&
5568 (src_w > ICL_MAX_SRC_W || src_h > ICL_MAX_SRC_H ||
5569 dst_w > ICL_MAX_DST_W || dst_h > ICL_MAX_DST_H)) ||
5570 (INTEL_GEN(dev_priv) < 11 &&
5571 (src_w > SKL_MAX_SRC_W || src_h > SKL_MAX_SRC_H ||
5572 dst_w > SKL_MAX_DST_W || dst_h > SKL_MAX_DST_H))) {
5573 DRM_DEBUG_KMS("scaler_user index %u.%u: src %ux%u dst %ux%u "
5574 "size is out of scaler range\n",
5575 intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h);
5579 /* mark this plane as a scaler user in crtc_state */
5580 scaler_state->scaler_users |= (1 << scaler_user);
5581 DRM_DEBUG_KMS("scaler_user index %u.%u: "
5582 "staged scaling request for %ux%u->%ux%u scaler_users = 0x%x\n",
5583 intel_crtc->pipe, scaler_user, src_w, src_h, dst_w, dst_h,
5584 scaler_state->scaler_users);
5590 * skl_update_scaler_crtc - Stages update to scaler state for a given crtc.
5592 * @state: crtc's scaler state
5595 * 0 - scaler_usage updated successfully
5596 * error - requested scaling cannot be supported or other error condition
5598 int skl_update_scaler_crtc(struct intel_crtc_state *state)
5600 const struct drm_display_mode *adjusted_mode = &state->base.adjusted_mode;
5601 bool need_scaler = false;
5603 if (state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
5606 return skl_update_scaler(state, !state->base.active, SKL_CRTC_INDEX,
5607 &state->scaler_state.scaler_id,
5608 state->pipe_src_w, state->pipe_src_h,
5609 adjusted_mode->crtc_hdisplay,
5610 adjusted_mode->crtc_vdisplay, NULL, need_scaler);
5614 * skl_update_scaler_plane - Stages update to scaler state for a given plane.
5615 * @crtc_state: crtc's scaler state
5616 * @plane_state: atomic plane state to update
5619 * 0 - scaler_usage updated successfully
5620 * error - requested scaling cannot be supported or other error condition
5622 static int skl_update_scaler_plane(struct intel_crtc_state *crtc_state,
5623 struct intel_plane_state *plane_state)
5625 struct intel_plane *intel_plane =
5626 to_intel_plane(plane_state->base.plane);
5627 struct drm_i915_private *dev_priv = to_i915(intel_plane->base.dev);
5628 struct drm_framebuffer *fb = plane_state->base.fb;
5630 bool force_detach = !fb || !plane_state->base.visible;
5631 bool need_scaler = false;
5633 /* Pre-gen11 and SDR planes always need a scaler for planar formats. */
5634 if (!icl_is_hdr_plane(dev_priv, intel_plane->id) &&
5635 fb && drm_format_info_is_yuv_semiplanar(fb->format))
5638 ret = skl_update_scaler(crtc_state, force_detach,
5639 drm_plane_index(&intel_plane->base),
5640 &plane_state->scaler_id,
5641 drm_rect_width(&plane_state->base.src) >> 16,
5642 drm_rect_height(&plane_state->base.src) >> 16,
5643 drm_rect_width(&plane_state->base.dst),
5644 drm_rect_height(&plane_state->base.dst),
5645 fb ? fb->format : NULL, need_scaler);
5647 if (ret || plane_state->scaler_id < 0)
5650 /* check colorkey */
5651 if (plane_state->ckey.flags) {
5652 DRM_DEBUG_KMS("[PLANE:%d:%s] scaling with color key not allowed",
5653 intel_plane->base.base.id,
5654 intel_plane->base.name);
5658 /* Check src format */
5659 switch (fb->format->format) {
5660 case DRM_FORMAT_RGB565:
5661 case DRM_FORMAT_XBGR8888:
5662 case DRM_FORMAT_XRGB8888:
5663 case DRM_FORMAT_ABGR8888:
5664 case DRM_FORMAT_ARGB8888:
5665 case DRM_FORMAT_XRGB2101010:
5666 case DRM_FORMAT_XBGR2101010:
5667 case DRM_FORMAT_YUYV:
5668 case DRM_FORMAT_YVYU:
5669 case DRM_FORMAT_UYVY:
5670 case DRM_FORMAT_VYUY:
5671 case DRM_FORMAT_NV12:
5672 case DRM_FORMAT_P010:
5673 case DRM_FORMAT_P012:
5674 case DRM_FORMAT_P016:
5675 case DRM_FORMAT_Y210:
5676 case DRM_FORMAT_Y212:
5677 case DRM_FORMAT_Y216:
5678 case DRM_FORMAT_XVYU2101010:
5679 case DRM_FORMAT_XVYU12_16161616:
5680 case DRM_FORMAT_XVYU16161616:
5682 case DRM_FORMAT_XBGR16161616F:
5683 case DRM_FORMAT_ABGR16161616F:
5684 case DRM_FORMAT_XRGB16161616F:
5685 case DRM_FORMAT_ARGB16161616F:
5686 if (INTEL_GEN(dev_priv) >= 11)
5690 DRM_DEBUG_KMS("[PLANE:%d:%s] FB:%d unsupported scaling format 0x%x\n",
5691 intel_plane->base.base.id, intel_plane->base.name,
5692 fb->base.id, fb->format->format);
5699 static void skylake_scaler_disable(struct intel_crtc *crtc)
5703 for (i = 0; i < crtc->num_scalers; i++)
5704 skl_detach_scaler(crtc, i);
5707 static void skylake_pfit_enable(const struct intel_crtc_state *crtc_state)
5709 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
5710 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
5711 enum pipe pipe = crtc->pipe;
5712 const struct intel_crtc_scaler_state *scaler_state =
5713 &crtc_state->scaler_state;
5715 if (crtc_state->pch_pfit.enabled) {
5716 u16 uv_rgb_hphase, uv_rgb_vphase;
5717 int pfit_w, pfit_h, hscale, vscale;
5720 if (WARN_ON(crtc_state->scaler_state.scaler_id < 0))
5723 pfit_w = (crtc_state->pch_pfit.size >> 16) & 0xFFFF;
5724 pfit_h = crtc_state->pch_pfit.size & 0xFFFF;
5726 hscale = (crtc_state->pipe_src_w << 16) / pfit_w;
5727 vscale = (crtc_state->pipe_src_h << 16) / pfit_h;
5729 uv_rgb_hphase = skl_scaler_calc_phase(1, hscale, false);
5730 uv_rgb_vphase = skl_scaler_calc_phase(1, vscale, false);
5732 id = scaler_state->scaler_id;
5733 I915_WRITE(SKL_PS_CTRL(pipe, id), PS_SCALER_EN |
5734 PS_FILTER_MEDIUM | scaler_state->scalers[id].mode);
5735 I915_WRITE_FW(SKL_PS_VPHASE(pipe, id),
5736 PS_Y_PHASE(0) | PS_UV_RGB_PHASE(uv_rgb_vphase));
5737 I915_WRITE_FW(SKL_PS_HPHASE(pipe, id),
5738 PS_Y_PHASE(0) | PS_UV_RGB_PHASE(uv_rgb_hphase));
5739 I915_WRITE(SKL_PS_WIN_POS(pipe, id), crtc_state->pch_pfit.pos);
5740 I915_WRITE(SKL_PS_WIN_SZ(pipe, id), crtc_state->pch_pfit.size);
5744 static void ironlake_pfit_enable(const struct intel_crtc_state *crtc_state)
5746 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
5747 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
5748 enum pipe pipe = crtc->pipe;
5750 if (crtc_state->pch_pfit.enabled) {
5751 /* Force use of hard-coded filter coefficients
5752 * as some pre-programmed values are broken,
5755 if (IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv))
5756 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 |
5757 PF_PIPE_SEL_IVB(pipe));
5759 I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3);
5760 I915_WRITE(PF_WIN_POS(pipe), crtc_state->pch_pfit.pos);
5761 I915_WRITE(PF_WIN_SZ(pipe), crtc_state->pch_pfit.size);
5765 void hsw_enable_ips(const struct intel_crtc_state *crtc_state)
5767 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
5768 struct drm_device *dev = crtc->base.dev;
5769 struct drm_i915_private *dev_priv = to_i915(dev);
5771 if (!crtc_state->ips_enabled)
5775 * We can only enable IPS after we enable a plane and wait for a vblank
5776 * This function is called from post_plane_update, which is run after
5779 WARN_ON(!(crtc_state->active_planes & ~BIT(PLANE_CURSOR)));
5781 if (IS_BROADWELL(dev_priv)) {
5782 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL,
5783 IPS_ENABLE | IPS_PCODE_CONTROL));
5784 /* Quoting Art Runyan: "its not safe to expect any particular
5785 * value in IPS_CTL bit 31 after enabling IPS through the
5786 * mailbox." Moreover, the mailbox may return a bogus state,
5787 * so we need to just enable it and continue on.
5790 I915_WRITE(IPS_CTL, IPS_ENABLE);
5791 /* The bit only becomes 1 in the next vblank, so this wait here
5792 * is essentially intel_wait_for_vblank. If we don't have this
5793 * and don't wait for vblanks until the end of crtc_enable, then
5794 * the HW state readout code will complain that the expected
5795 * IPS_CTL value is not the one we read. */
5796 if (intel_de_wait_for_set(dev_priv, IPS_CTL, IPS_ENABLE, 50))
5797 DRM_ERROR("Timed out waiting for IPS enable\n");
5801 void hsw_disable_ips(const struct intel_crtc_state *crtc_state)
5803 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
5804 struct drm_device *dev = crtc->base.dev;
5805 struct drm_i915_private *dev_priv = to_i915(dev);
5807 if (!crtc_state->ips_enabled)
5810 if (IS_BROADWELL(dev_priv)) {
5811 WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0));
5813 * Wait for PCODE to finish disabling IPS. The BSpec specified
5814 * 42ms timeout value leads to occasional timeouts so use 100ms
5817 if (intel_de_wait_for_clear(dev_priv, IPS_CTL, IPS_ENABLE, 100))
5818 DRM_ERROR("Timed out waiting for IPS disable\n");
5820 I915_WRITE(IPS_CTL, 0);
5821 POSTING_READ(IPS_CTL);
5824 /* We need to wait for a vblank before we can disable the plane. */
5825 intel_wait_for_vblank(dev_priv, crtc->pipe);
5828 static void intel_crtc_dpms_overlay_disable(struct intel_crtc *intel_crtc)
5830 if (intel_crtc->overlay)
5831 (void) intel_overlay_switch_off(intel_crtc->overlay);
5833 /* Let userspace switch the overlay on again. In most cases userspace
5834 * has to recompute where to put it anyway.
5839 * intel_post_enable_primary - Perform operations after enabling primary plane
5840 * @crtc: the CRTC whose primary plane was just enabled
5841 * @new_crtc_state: the enabling state
5843 * Performs potentially sleeping operations that must be done after the primary
5844 * plane is enabled, such as updating FBC and IPS. Note that this may be
5845 * called due to an explicit primary plane update, or due to an implicit
5846 * re-enable that is caused when a sprite plane is updated to no longer
5847 * completely hide the primary plane.
5850 intel_post_enable_primary(struct drm_crtc *crtc,
5851 const struct intel_crtc_state *new_crtc_state)
5853 struct drm_device *dev = crtc->dev;
5854 struct drm_i915_private *dev_priv = to_i915(dev);
5855 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5856 enum pipe pipe = intel_crtc->pipe;
5859 * Gen2 reports pipe underruns whenever all planes are disabled.
5860 * So don't enable underrun reporting before at least some planes
5862 * FIXME: Need to fix the logic to work when we turn off all planes
5863 * but leave the pipe running.
5865 if (IS_GEN(dev_priv, 2))
5866 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
5868 /* Underruns don't always raise interrupts, so check manually. */
5869 intel_check_cpu_fifo_underruns(dev_priv);
5870 intel_check_pch_fifo_underruns(dev_priv);
5873 /* FIXME get rid of this and use pre_plane_update */
5875 intel_pre_disable_primary_noatomic(struct drm_crtc *crtc)
5877 struct drm_device *dev = crtc->dev;
5878 struct drm_i915_private *dev_priv = to_i915(dev);
5879 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
5880 enum pipe pipe = intel_crtc->pipe;
5883 * Gen2 reports pipe underruns whenever all planes are disabled.
5884 * So disable underrun reporting before all the planes get disabled.
5886 if (IS_GEN(dev_priv, 2))
5887 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
5889 hsw_disable_ips(to_intel_crtc_state(crtc->state));
5892 * Vblank time updates from the shadow to live plane control register
5893 * are blocked if the memory self-refresh mode is active at that
5894 * moment. So to make sure the plane gets truly disabled, disable
5895 * first the self-refresh mode. The self-refresh enable bit in turn
5896 * will be checked/applied by the HW only at the next frame start
5897 * event which is after the vblank start event, so we need to have a
5898 * wait-for-vblank between disabling the plane and the pipe.
5900 if (HAS_GMCH(dev_priv) &&
5901 intel_set_memory_cxsr(dev_priv, false))
5902 intel_wait_for_vblank(dev_priv, pipe);
5905 static bool hsw_pre_update_disable_ips(const struct intel_crtc_state *old_crtc_state,
5906 const struct intel_crtc_state *new_crtc_state)
5908 struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->base.crtc);
5909 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
5911 if (!old_crtc_state->ips_enabled)
5914 if (needs_modeset(new_crtc_state))
5918 * Workaround : Do not read or write the pipe palette/gamma data while
5919 * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
5921 * Disable IPS before we program the LUT.
5923 if (IS_HASWELL(dev_priv) &&
5924 (new_crtc_state->base.color_mgmt_changed ||
5925 new_crtc_state->update_pipe) &&
5926 new_crtc_state->gamma_mode == GAMMA_MODE_MODE_SPLIT)
5929 return !new_crtc_state->ips_enabled;
5932 static bool hsw_post_update_enable_ips(const struct intel_crtc_state *old_crtc_state,
5933 const struct intel_crtc_state *new_crtc_state)
5935 struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->base.crtc);
5936 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
5938 if (!new_crtc_state->ips_enabled)
5941 if (needs_modeset(new_crtc_state))
5945 * Workaround : Do not read or write the pipe palette/gamma data while
5946 * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled.
5948 * Re-enable IPS after the LUT has been programmed.
5950 if (IS_HASWELL(dev_priv) &&
5951 (new_crtc_state->base.color_mgmt_changed ||
5952 new_crtc_state->update_pipe) &&
5953 new_crtc_state->gamma_mode == GAMMA_MODE_MODE_SPLIT)
5957 * We can't read out IPS on broadwell, assume the worst and
5958 * forcibly enable IPS on the first fastset.
5960 if (new_crtc_state->update_pipe &&
5961 old_crtc_state->base.adjusted_mode.private_flags & I915_MODE_FLAG_INHERITED)
5964 return !old_crtc_state->ips_enabled;
5967 static bool needs_nv12_wa(struct drm_i915_private *dev_priv,
5968 const struct intel_crtc_state *crtc_state)
5970 if (!crtc_state->nv12_planes)
5973 /* WA Display #0827: Gen9:all */
5974 if (IS_GEN(dev_priv, 9) && !IS_GEMINILAKE(dev_priv))
5980 static bool needs_scalerclk_wa(struct drm_i915_private *dev_priv,
5981 const struct intel_crtc_state *crtc_state)
5983 /* Wa_2006604312:icl */
5984 if (crtc_state->scaler_state.scaler_users > 0 && IS_ICELAKE(dev_priv))
5990 static void intel_post_plane_update(struct intel_crtc_state *old_crtc_state)
5992 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
5993 struct drm_device *dev = crtc->base.dev;
5994 struct drm_i915_private *dev_priv = to_i915(dev);
5995 struct drm_atomic_state *state = old_crtc_state->base.state;
5996 struct intel_crtc_state *pipe_config =
5997 intel_atomic_get_new_crtc_state(to_intel_atomic_state(state),
5999 struct drm_plane *primary = crtc->base.primary;
6000 struct drm_plane_state *old_primary_state =
6001 drm_atomic_get_old_plane_state(state, primary);
6003 intel_frontbuffer_flip(to_i915(crtc->base.dev), pipe_config->fb_bits);
6005 if (pipe_config->update_wm_post && pipe_config->base.active)
6006 intel_update_watermarks(crtc);
6008 if (hsw_post_update_enable_ips(old_crtc_state, pipe_config))
6009 hsw_enable_ips(pipe_config);
6011 if (old_primary_state) {
6012 struct drm_plane_state *new_primary_state =
6013 drm_atomic_get_new_plane_state(state, primary);
6015 intel_fbc_post_update(crtc);
6017 if (new_primary_state->visible &&
6018 (needs_modeset(pipe_config) ||
6019 !old_primary_state->visible))
6020 intel_post_enable_primary(&crtc->base, pipe_config);
6023 if (needs_nv12_wa(dev_priv, old_crtc_state) &&
6024 !needs_nv12_wa(dev_priv, pipe_config))
6025 skl_wa_827(dev_priv, crtc->pipe, false);
6027 if (needs_scalerclk_wa(dev_priv, old_crtc_state) &&
6028 !needs_scalerclk_wa(dev_priv, pipe_config))
6029 icl_wa_scalerclkgating(dev_priv, crtc->pipe, false);
6032 static void intel_pre_plane_update(struct intel_crtc_state *old_crtc_state,
6033 struct intel_crtc_state *pipe_config)
6035 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
6036 struct drm_device *dev = crtc->base.dev;
6037 struct drm_i915_private *dev_priv = to_i915(dev);
6038 struct drm_atomic_state *state = old_crtc_state->base.state;
6039 struct drm_plane *primary = crtc->base.primary;
6040 struct drm_plane_state *old_primary_state =
6041 drm_atomic_get_old_plane_state(state, primary);
6042 bool modeset = needs_modeset(pipe_config);
6043 struct intel_atomic_state *intel_state =
6044 to_intel_atomic_state(state);
6046 if (hsw_pre_update_disable_ips(old_crtc_state, pipe_config))
6047 hsw_disable_ips(old_crtc_state);
6049 if (old_primary_state) {
6050 struct intel_plane_state *new_primary_state =
6051 intel_atomic_get_new_plane_state(intel_state,
6052 to_intel_plane(primary));
6054 intel_fbc_pre_update(crtc, pipe_config, new_primary_state);
6056 * Gen2 reports pipe underruns whenever all planes are disabled.
6057 * So disable underrun reporting before all the planes get disabled.
6059 if (IS_GEN(dev_priv, 2) && old_primary_state->visible &&
6060 (modeset || !new_primary_state->base.visible))
6061 intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, false);
6064 /* Display WA 827 */
6065 if (!needs_nv12_wa(dev_priv, old_crtc_state) &&
6066 needs_nv12_wa(dev_priv, pipe_config))
6067 skl_wa_827(dev_priv, crtc->pipe, true);
6069 /* Wa_2006604312:icl */
6070 if (!needs_scalerclk_wa(dev_priv, old_crtc_state) &&
6071 needs_scalerclk_wa(dev_priv, pipe_config))
6072 icl_wa_scalerclkgating(dev_priv, crtc->pipe, true);
6075 * Vblank time updates from the shadow to live plane control register
6076 * are blocked if the memory self-refresh mode is active at that
6077 * moment. So to make sure the plane gets truly disabled, disable
6078 * first the self-refresh mode. The self-refresh enable bit in turn
6079 * will be checked/applied by the HW only at the next frame start
6080 * event which is after the vblank start event, so we need to have a
6081 * wait-for-vblank between disabling the plane and the pipe.
6083 if (HAS_GMCH(dev_priv) && old_crtc_state->base.active &&
6084 pipe_config->disable_cxsr && intel_set_memory_cxsr(dev_priv, false))
6085 intel_wait_for_vblank(dev_priv, crtc->pipe);
6088 * IVB workaround: must disable low power watermarks for at least
6089 * one frame before enabling scaling. LP watermarks can be re-enabled
6090 * when scaling is disabled.
6092 * WaCxSRDisabledForSpriteScaling:ivb
6094 if (pipe_config->disable_lp_wm && ilk_disable_lp_wm(dev) &&
6095 old_crtc_state->base.active)
6096 intel_wait_for_vblank(dev_priv, crtc->pipe);
6099 * If we're doing a modeset, we're done. No need to do any pre-vblank
6100 * watermark programming here.
6102 if (needs_modeset(pipe_config))
6106 * For platforms that support atomic watermarks, program the
6107 * 'intermediate' watermarks immediately. On pre-gen9 platforms, these
6108 * will be the intermediate values that are safe for both pre- and
6109 * post- vblank; when vblank happens, the 'active' values will be set
6110 * to the final 'target' values and we'll do this again to get the
6111 * optimal watermarks. For gen9+ platforms, the values we program here
6112 * will be the final target values which will get automatically latched
6113 * at vblank time; no further programming will be necessary.
6115 * If a platform hasn't been transitioned to atomic watermarks yet,
6116 * we'll continue to update watermarks the old way, if flags tell
6119 if (dev_priv->display.initial_watermarks != NULL)
6120 dev_priv->display.initial_watermarks(intel_state,
6122 else if (pipe_config->update_wm_pre)
6123 intel_update_watermarks(crtc);
6126 static void intel_crtc_disable_planes(struct intel_atomic_state *state,
6127 struct intel_crtc *crtc)
6129 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6130 const struct intel_crtc_state *new_crtc_state =
6131 intel_atomic_get_new_crtc_state(state, crtc);
6132 unsigned int update_mask = new_crtc_state->update_planes;
6133 const struct intel_plane_state *old_plane_state;
6134 struct intel_plane *plane;
6135 unsigned fb_bits = 0;
6138 intel_crtc_dpms_overlay_disable(crtc);
6140 for_each_old_intel_plane_in_state(state, plane, old_plane_state, i) {
6141 if (crtc->pipe != plane->pipe ||
6142 !(update_mask & BIT(plane->id)))
6145 intel_disable_plane(plane, new_crtc_state);
6147 if (old_plane_state->base.visible)
6148 fb_bits |= plane->frontbuffer_bit;
6151 intel_frontbuffer_flip(dev_priv, fb_bits);
6155 * intel_connector_primary_encoder - get the primary encoder for a connector
6156 * @connector: connector for which to return the encoder
6158 * Returns the primary encoder for a connector. There is a 1:1 mapping from
6159 * all connectors to their encoder, except for DP-MST connectors which have
6160 * both a virtual and a primary encoder. These DP-MST primary encoders can be
6161 * pointed to by as many DP-MST connectors as there are pipes.
6163 static struct intel_encoder *
6164 intel_connector_primary_encoder(struct intel_connector *connector)
6166 struct intel_encoder *encoder;
6168 if (connector->mst_port)
6169 return &dp_to_dig_port(connector->mst_port)->base;
6171 encoder = intel_attached_encoder(&connector->base);
6178 intel_connector_needs_modeset(struct intel_atomic_state *state,
6179 const struct drm_connector_state *old_conn_state,
6180 const struct drm_connector_state *new_conn_state)
6182 struct intel_crtc *old_crtc = old_conn_state->crtc ?
6183 to_intel_crtc(old_conn_state->crtc) : NULL;
6184 struct intel_crtc *new_crtc = new_conn_state->crtc ?
6185 to_intel_crtc(new_conn_state->crtc) : NULL;
6187 return new_crtc != old_crtc ||
6189 needs_modeset(intel_atomic_get_new_crtc_state(state, new_crtc)));
6192 static void intel_encoders_update_prepare(struct intel_atomic_state *state)
6194 struct drm_connector_state *old_conn_state;
6195 struct drm_connector_state *new_conn_state;
6196 struct drm_connector *conn;
6199 for_each_oldnew_connector_in_state(&state->base, conn,
6200 old_conn_state, new_conn_state, i) {
6201 struct intel_encoder *encoder;
6202 struct intel_crtc *crtc;
6204 if (!intel_connector_needs_modeset(state,
6209 encoder = intel_connector_primary_encoder(to_intel_connector(conn));
6210 if (!encoder->update_prepare)
6213 crtc = new_conn_state->crtc ?
6214 to_intel_crtc(new_conn_state->crtc) : NULL;
6215 encoder->update_prepare(state, encoder, crtc);
6219 static void intel_encoders_update_complete(struct intel_atomic_state *state)
6221 struct drm_connector_state *old_conn_state;
6222 struct drm_connector_state *new_conn_state;
6223 struct drm_connector *conn;
6226 for_each_oldnew_connector_in_state(&state->base, conn,
6227 old_conn_state, new_conn_state, i) {
6228 struct intel_encoder *encoder;
6229 struct intel_crtc *crtc;
6231 if (!intel_connector_needs_modeset(state,
6236 encoder = intel_connector_primary_encoder(to_intel_connector(conn));
6237 if (!encoder->update_complete)
6240 crtc = new_conn_state->crtc ?
6241 to_intel_crtc(new_conn_state->crtc) : NULL;
6242 encoder->update_complete(state, encoder, crtc);
6246 static void intel_encoders_pre_pll_enable(struct intel_crtc *crtc,
6247 struct intel_crtc_state *crtc_state,
6248 struct intel_atomic_state *state)
6250 struct drm_connector_state *conn_state;
6251 struct drm_connector *conn;
6254 for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
6255 struct intel_encoder *encoder =
6256 to_intel_encoder(conn_state->best_encoder);
6258 if (conn_state->crtc != &crtc->base)
6261 if (encoder->pre_pll_enable)
6262 encoder->pre_pll_enable(encoder, crtc_state, conn_state);
6266 static void intel_encoders_pre_enable(struct intel_crtc *crtc,
6267 struct intel_crtc_state *crtc_state,
6268 struct intel_atomic_state *state)
6270 struct drm_connector_state *conn_state;
6271 struct drm_connector *conn;
6274 for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
6275 struct intel_encoder *encoder =
6276 to_intel_encoder(conn_state->best_encoder);
6278 if (conn_state->crtc != &crtc->base)
6281 if (encoder->pre_enable)
6282 encoder->pre_enable(encoder, crtc_state, conn_state);
6286 static void intel_encoders_enable(struct intel_crtc *crtc,
6287 struct intel_crtc_state *crtc_state,
6288 struct intel_atomic_state *state)
6290 struct drm_connector_state *conn_state;
6291 struct drm_connector *conn;
6294 for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
6295 struct intel_encoder *encoder =
6296 to_intel_encoder(conn_state->best_encoder);
6298 if (conn_state->crtc != &crtc->base)
6301 if (encoder->enable)
6302 encoder->enable(encoder, crtc_state, conn_state);
6303 intel_opregion_notify_encoder(encoder, true);
6307 static void intel_encoders_disable(struct intel_crtc *crtc,
6308 struct intel_crtc_state *old_crtc_state,
6309 struct intel_atomic_state *state)
6311 struct drm_connector_state *old_conn_state;
6312 struct drm_connector *conn;
6315 for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) {
6316 struct intel_encoder *encoder =
6317 to_intel_encoder(old_conn_state->best_encoder);
6319 if (old_conn_state->crtc != &crtc->base)
6322 intel_opregion_notify_encoder(encoder, false);
6323 if (encoder->disable)
6324 encoder->disable(encoder, old_crtc_state, old_conn_state);
6328 static void intel_encoders_post_disable(struct intel_crtc *crtc,
6329 struct intel_crtc_state *old_crtc_state,
6330 struct intel_atomic_state *state)
6332 struct drm_connector_state *old_conn_state;
6333 struct drm_connector *conn;
6336 for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) {
6337 struct intel_encoder *encoder =
6338 to_intel_encoder(old_conn_state->best_encoder);
6340 if (old_conn_state->crtc != &crtc->base)
6343 if (encoder->post_disable)
6344 encoder->post_disable(encoder, old_crtc_state, old_conn_state);
6348 static void intel_encoders_post_pll_disable(struct intel_crtc *crtc,
6349 struct intel_crtc_state *old_crtc_state,
6350 struct intel_atomic_state *state)
6352 struct drm_connector_state *old_conn_state;
6353 struct drm_connector *conn;
6356 for_each_old_connector_in_state(&state->base, conn, old_conn_state, i) {
6357 struct intel_encoder *encoder =
6358 to_intel_encoder(old_conn_state->best_encoder);
6360 if (old_conn_state->crtc != &crtc->base)
6363 if (encoder->post_pll_disable)
6364 encoder->post_pll_disable(encoder, old_crtc_state, old_conn_state);
6368 static void intel_encoders_update_pipe(struct intel_crtc *crtc,
6369 struct intel_crtc_state *crtc_state,
6370 struct intel_atomic_state *state)
6372 struct drm_connector_state *conn_state;
6373 struct drm_connector *conn;
6376 for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
6377 struct intel_encoder *encoder =
6378 to_intel_encoder(conn_state->best_encoder);
6380 if (conn_state->crtc != &crtc->base)
6383 if (encoder->update_pipe)
6384 encoder->update_pipe(encoder, crtc_state, conn_state);
6388 static void intel_disable_primary_plane(const struct intel_crtc_state *crtc_state)
6390 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
6391 struct intel_plane *plane = to_intel_plane(crtc->base.primary);
6393 plane->disable_plane(plane, crtc_state);
6396 static void ironlake_crtc_enable(struct intel_crtc_state *pipe_config,
6397 struct intel_atomic_state *state)
6399 struct drm_crtc *crtc = pipe_config->base.crtc;
6400 struct drm_device *dev = crtc->dev;
6401 struct drm_i915_private *dev_priv = to_i915(dev);
6402 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6403 enum pipe pipe = intel_crtc->pipe;
6405 if (WARN_ON(intel_crtc->active))
6409 * Sometimes spurious CPU pipe underruns happen during FDI
6410 * training, at least with VGA+HDMI cloning. Suppress them.
6412 * On ILK we get an occasional spurious CPU pipe underruns
6413 * between eDP port A enable and vdd enable. Also PCH port
6414 * enable seems to result in the occasional CPU pipe underrun.
6416 * Spurious PCH underruns also occur during PCH enabling.
6418 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
6419 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
6421 if (pipe_config->has_pch_encoder)
6422 intel_prepare_shared_dpll(pipe_config);
6424 if (intel_crtc_has_dp_encoder(pipe_config))
6425 intel_dp_set_m_n(pipe_config, M1_N1);
6427 intel_set_pipe_timings(pipe_config);
6428 intel_set_pipe_src_size(pipe_config);
6430 if (pipe_config->has_pch_encoder) {
6431 intel_cpu_transcoder_set_m_n(pipe_config,
6432 &pipe_config->fdi_m_n, NULL);
6435 ironlake_set_pipeconf(pipe_config);
6437 intel_crtc->active = true;
6439 intel_encoders_pre_enable(intel_crtc, pipe_config, state);
6441 if (pipe_config->has_pch_encoder) {
6442 /* Note: FDI PLL enabling _must_ be done before we enable the
6443 * cpu pipes, hence this is separate from all the other fdi/pch
6445 ironlake_fdi_pll_enable(pipe_config);
6447 assert_fdi_tx_disabled(dev_priv, pipe);
6448 assert_fdi_rx_disabled(dev_priv, pipe);
6451 ironlake_pfit_enable(pipe_config);
6454 * On ILK+ LUT must be loaded before the pipe is running but with
6457 intel_color_load_luts(pipe_config);
6458 intel_color_commit(pipe_config);
6459 /* update DSPCNTR to configure gamma for pipe bottom color */
6460 intel_disable_primary_plane(pipe_config);
6462 if (dev_priv->display.initial_watermarks != NULL)
6463 dev_priv->display.initial_watermarks(state, pipe_config);
6464 intel_enable_pipe(pipe_config);
6466 if (pipe_config->has_pch_encoder)
6467 ironlake_pch_enable(state, pipe_config);
6469 assert_vblank_disabled(crtc);
6470 intel_crtc_vblank_on(pipe_config);
6472 intel_encoders_enable(intel_crtc, pipe_config, state);
6474 if (HAS_PCH_CPT(dev_priv))
6475 cpt_verify_modeset(dev, intel_crtc->pipe);
6478 * Must wait for vblank to avoid spurious PCH FIFO underruns.
6479 * And a second vblank wait is needed at least on ILK with
6480 * some interlaced HDMI modes. Let's do the double wait always
6481 * in case there are more corner cases we don't know about.
6483 if (pipe_config->has_pch_encoder) {
6484 intel_wait_for_vblank(dev_priv, pipe);
6485 intel_wait_for_vblank(dev_priv, pipe);
6487 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
6488 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
6491 /* IPS only exists on ULT machines and is tied to pipe A. */
6492 static bool hsw_crtc_supports_ips(struct intel_crtc *crtc)
6494 return HAS_IPS(to_i915(crtc->base.dev)) && crtc->pipe == PIPE_A;
6497 static void glk_pipe_scaler_clock_gating_wa(struct drm_i915_private *dev_priv,
6498 enum pipe pipe, bool apply)
6500 u32 val = I915_READ(CLKGATE_DIS_PSL(pipe));
6501 u32 mask = DPF_GATING_DIS | DPF_RAM_GATING_DIS | DPFR_GATING_DIS;
6508 I915_WRITE(CLKGATE_DIS_PSL(pipe), val);
6511 static void icl_pipe_mbus_enable(struct intel_crtc *crtc)
6513 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6514 enum pipe pipe = crtc->pipe;
6517 val = MBUS_DBOX_A_CREDIT(2);
6519 if (INTEL_GEN(dev_priv) >= 12) {
6520 val |= MBUS_DBOX_BW_CREDIT(2);
6521 val |= MBUS_DBOX_B_CREDIT(12);
6523 val |= MBUS_DBOX_BW_CREDIT(1);
6524 val |= MBUS_DBOX_B_CREDIT(8);
6527 I915_WRITE(PIPE_MBUS_DBOX_CTL(pipe), val);
6530 static void haswell_crtc_enable(struct intel_crtc_state *pipe_config,
6531 struct intel_atomic_state *state)
6533 struct drm_crtc *crtc = pipe_config->base.crtc;
6534 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
6535 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6536 enum pipe pipe = intel_crtc->pipe, hsw_workaround_pipe;
6537 enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
6538 bool psl_clkgate_wa;
6540 if (WARN_ON(intel_crtc->active))
6543 intel_encoders_pre_pll_enable(intel_crtc, pipe_config, state);
6545 if (pipe_config->shared_dpll)
6546 intel_enable_shared_dpll(pipe_config);
6548 intel_encoders_pre_enable(intel_crtc, pipe_config, state);
6550 if (intel_crtc_has_dp_encoder(pipe_config))
6551 intel_dp_set_m_n(pipe_config, M1_N1);
6553 if (!transcoder_is_dsi(cpu_transcoder))
6554 intel_set_pipe_timings(pipe_config);
6556 if (INTEL_GEN(dev_priv) >= 11)
6557 icl_enable_trans_port_sync(pipe_config);
6559 intel_set_pipe_src_size(pipe_config);
6561 if (cpu_transcoder != TRANSCODER_EDP &&
6562 !transcoder_is_dsi(cpu_transcoder)) {
6563 I915_WRITE(PIPE_MULT(cpu_transcoder),
6564 pipe_config->pixel_multiplier - 1);
6567 if (pipe_config->has_pch_encoder) {
6568 intel_cpu_transcoder_set_m_n(pipe_config,
6569 &pipe_config->fdi_m_n, NULL);
6572 if (!transcoder_is_dsi(cpu_transcoder))
6573 haswell_set_pipeconf(pipe_config);
6575 if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
6576 bdw_set_pipemisc(pipe_config);
6578 intel_crtc->active = true;
6580 /* Display WA #1180: WaDisableScalarClockGating: glk, cnl */
6581 psl_clkgate_wa = (IS_GEMINILAKE(dev_priv) || IS_CANNONLAKE(dev_priv)) &&
6582 pipe_config->pch_pfit.enabled;
6584 glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, true);
6586 if (INTEL_GEN(dev_priv) >= 9)
6587 skylake_pfit_enable(pipe_config);
6589 ironlake_pfit_enable(pipe_config);
6592 * On ILK+ LUT must be loaded before the pipe is running but with
6595 intel_color_load_luts(pipe_config);
6596 intel_color_commit(pipe_config);
6597 /* update DSPCNTR to configure gamma/csc for pipe bottom color */
6598 if (INTEL_GEN(dev_priv) < 9)
6599 intel_disable_primary_plane(pipe_config);
6601 if (INTEL_GEN(dev_priv) >= 11)
6602 icl_set_pipe_chicken(intel_crtc);
6604 if (!transcoder_is_dsi(cpu_transcoder))
6605 intel_ddi_enable_transcoder_func(pipe_config);
6607 if (dev_priv->display.initial_watermarks != NULL)
6608 dev_priv->display.initial_watermarks(state, pipe_config);
6610 if (INTEL_GEN(dev_priv) >= 11)
6611 icl_pipe_mbus_enable(intel_crtc);
6613 /* XXX: Do the pipe assertions at the right place for BXT DSI. */
6614 if (!transcoder_is_dsi(cpu_transcoder))
6615 intel_enable_pipe(pipe_config);
6617 if (pipe_config->has_pch_encoder)
6618 lpt_pch_enable(state, pipe_config);
6620 if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DP_MST))
6621 intel_ddi_set_vc_payload_alloc(pipe_config, true);
6623 assert_vblank_disabled(crtc);
6624 intel_crtc_vblank_on(pipe_config);
6626 intel_encoders_enable(intel_crtc, pipe_config, state);
6628 if (psl_clkgate_wa) {
6629 intel_wait_for_vblank(dev_priv, pipe);
6630 glk_pipe_scaler_clock_gating_wa(dev_priv, pipe, false);
6633 /* If we change the relative order between pipe/planes enabling, we need
6634 * to change the workaround. */
6635 hsw_workaround_pipe = pipe_config->hsw_workaround_pipe;
6636 if (IS_HASWELL(dev_priv) && hsw_workaround_pipe != INVALID_PIPE) {
6637 intel_wait_for_vblank(dev_priv, hsw_workaround_pipe);
6638 intel_wait_for_vblank(dev_priv, hsw_workaround_pipe);
6642 static void ironlake_pfit_disable(const struct intel_crtc_state *old_crtc_state)
6644 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
6645 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6646 enum pipe pipe = crtc->pipe;
6648 /* To avoid upsetting the power well on haswell only disable the pfit if
6649 * it's in use. The hw state code will make sure we get this right. */
6650 if (old_crtc_state->pch_pfit.enabled) {
6651 I915_WRITE(PF_CTL(pipe), 0);
6652 I915_WRITE(PF_WIN_POS(pipe), 0);
6653 I915_WRITE(PF_WIN_SZ(pipe), 0);
6657 static void ironlake_crtc_disable(struct intel_crtc_state *old_crtc_state,
6658 struct intel_atomic_state *state)
6660 struct drm_crtc *crtc = old_crtc_state->base.crtc;
6661 struct drm_device *dev = crtc->dev;
6662 struct drm_i915_private *dev_priv = to_i915(dev);
6663 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6664 enum pipe pipe = intel_crtc->pipe;
6667 * Sometimes spurious CPU pipe underruns happen when the
6668 * pipe is already disabled, but FDI RX/TX is still enabled.
6669 * Happens at least with VGA+HDMI cloning. Suppress them.
6671 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
6672 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, false);
6674 intel_encoders_disable(intel_crtc, old_crtc_state, state);
6676 drm_crtc_vblank_off(crtc);
6677 assert_vblank_disabled(crtc);
6679 intel_disable_pipe(old_crtc_state);
6681 ironlake_pfit_disable(old_crtc_state);
6683 if (old_crtc_state->has_pch_encoder)
6684 ironlake_fdi_disable(crtc);
6686 intel_encoders_post_disable(intel_crtc, old_crtc_state, state);
6688 if (old_crtc_state->has_pch_encoder) {
6689 ironlake_disable_pch_transcoder(dev_priv, pipe);
6691 if (HAS_PCH_CPT(dev_priv)) {
6695 /* disable TRANS_DP_CTL */
6696 reg = TRANS_DP_CTL(pipe);
6697 temp = I915_READ(reg);
6698 temp &= ~(TRANS_DP_OUTPUT_ENABLE |
6699 TRANS_DP_PORT_SEL_MASK);
6700 temp |= TRANS_DP_PORT_SEL_NONE;
6701 I915_WRITE(reg, temp);
6703 /* disable DPLL_SEL */
6704 temp = I915_READ(PCH_DPLL_SEL);
6705 temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe));
6706 I915_WRITE(PCH_DPLL_SEL, temp);
6709 ironlake_fdi_pll_disable(intel_crtc);
6712 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
6713 intel_set_pch_fifo_underrun_reporting(dev_priv, pipe, true);
6716 static void haswell_crtc_disable(struct intel_crtc_state *old_crtc_state,
6717 struct intel_atomic_state *state)
6719 struct drm_crtc *crtc = old_crtc_state->base.crtc;
6720 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
6721 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6722 enum transcoder cpu_transcoder = old_crtc_state->cpu_transcoder;
6724 intel_encoders_disable(intel_crtc, old_crtc_state, state);
6726 drm_crtc_vblank_off(crtc);
6727 assert_vblank_disabled(crtc);
6729 /* XXX: Do the pipe assertions at the right place for BXT DSI. */
6730 if (!transcoder_is_dsi(cpu_transcoder))
6731 intel_disable_pipe(old_crtc_state);
6733 if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DP_MST))
6734 intel_ddi_set_vc_payload_alloc(old_crtc_state, false);
6736 if (INTEL_GEN(dev_priv) >= 11)
6737 icl_disable_transcoder_port_sync(old_crtc_state);
6739 if (!transcoder_is_dsi(cpu_transcoder))
6740 intel_ddi_disable_transcoder_func(old_crtc_state);
6742 intel_dsc_disable(old_crtc_state);
6744 if (INTEL_GEN(dev_priv) >= 9)
6745 skylake_scaler_disable(intel_crtc);
6747 ironlake_pfit_disable(old_crtc_state);
6749 intel_encoders_post_disable(intel_crtc, old_crtc_state, state);
6751 intel_encoders_post_pll_disable(intel_crtc, old_crtc_state, state);
6754 static void i9xx_pfit_enable(const struct intel_crtc_state *crtc_state)
6756 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
6757 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6759 if (!crtc_state->gmch_pfit.control)
6763 * The panel fitter should only be adjusted whilst the pipe is disabled,
6764 * according to register description and PRM.
6766 WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE);
6767 assert_pipe_disabled(dev_priv, crtc->pipe);
6769 I915_WRITE(PFIT_PGM_RATIOS, crtc_state->gmch_pfit.pgm_ratios);
6770 I915_WRITE(PFIT_CONTROL, crtc_state->gmch_pfit.control);
6772 /* Border color in case we don't scale up to the full screen. Black by
6773 * default, change to something else for debugging. */
6774 I915_WRITE(BCLRPAT(crtc->pipe), 0);
6777 bool intel_phy_is_combo(struct drm_i915_private *dev_priv, enum phy phy)
6779 if (phy == PHY_NONE)
6782 if (IS_ELKHARTLAKE(dev_priv))
6783 return phy <= PHY_C;
6785 if (INTEL_GEN(dev_priv) >= 11)
6786 return phy <= PHY_B;
6791 bool intel_phy_is_tc(struct drm_i915_private *dev_priv, enum phy phy)
6793 if (INTEL_GEN(dev_priv) >= 12)
6794 return phy >= PHY_D && phy <= PHY_I;
6796 if (INTEL_GEN(dev_priv) >= 11 && !IS_ELKHARTLAKE(dev_priv))
6797 return phy >= PHY_C && phy <= PHY_F;
6802 enum phy intel_port_to_phy(struct drm_i915_private *i915, enum port port)
6804 if (IS_ELKHARTLAKE(i915) && port == PORT_D)
6807 return (enum phy)port;
6810 enum tc_port intel_port_to_tc(struct drm_i915_private *dev_priv, enum port port)
6812 if (!intel_phy_is_tc(dev_priv, intel_port_to_phy(dev_priv, port)))
6813 return PORT_TC_NONE;
6815 if (INTEL_GEN(dev_priv) >= 12)
6816 return port - PORT_D;
6818 return port - PORT_C;
6821 enum intel_display_power_domain intel_port_to_power_domain(enum port port)
6825 return POWER_DOMAIN_PORT_DDI_A_LANES;
6827 return POWER_DOMAIN_PORT_DDI_B_LANES;
6829 return POWER_DOMAIN_PORT_DDI_C_LANES;
6831 return POWER_DOMAIN_PORT_DDI_D_LANES;
6833 return POWER_DOMAIN_PORT_DDI_E_LANES;
6835 return POWER_DOMAIN_PORT_DDI_F_LANES;
6837 return POWER_DOMAIN_PORT_DDI_G_LANES;
6840 return POWER_DOMAIN_PORT_OTHER;
6844 enum intel_display_power_domain
6845 intel_aux_power_domain(struct intel_digital_port *dig_port)
6847 struct drm_i915_private *dev_priv = to_i915(dig_port->base.base.dev);
6848 enum phy phy = intel_port_to_phy(dev_priv, dig_port->base.port);
6850 if (intel_phy_is_tc(dev_priv, phy) &&
6851 dig_port->tc_mode == TC_PORT_TBT_ALT) {
6852 switch (dig_port->aux_ch) {
6854 return POWER_DOMAIN_AUX_C_TBT;
6856 return POWER_DOMAIN_AUX_D_TBT;
6858 return POWER_DOMAIN_AUX_E_TBT;
6860 return POWER_DOMAIN_AUX_F_TBT;
6862 return POWER_DOMAIN_AUX_G_TBT;
6864 MISSING_CASE(dig_port->aux_ch);
6865 return POWER_DOMAIN_AUX_C_TBT;
6869 switch (dig_port->aux_ch) {
6871 return POWER_DOMAIN_AUX_A;
6873 return POWER_DOMAIN_AUX_B;
6875 return POWER_DOMAIN_AUX_C;
6877 return POWER_DOMAIN_AUX_D;
6879 return POWER_DOMAIN_AUX_E;
6881 return POWER_DOMAIN_AUX_F;
6883 return POWER_DOMAIN_AUX_G;
6885 MISSING_CASE(dig_port->aux_ch);
6886 return POWER_DOMAIN_AUX_A;
6890 static u64 get_crtc_power_domains(struct intel_crtc_state *crtc_state)
6892 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
6893 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6894 struct drm_encoder *encoder;
6895 enum pipe pipe = crtc->pipe;
6897 enum transcoder transcoder = crtc_state->cpu_transcoder;
6899 if (!crtc_state->base.active)
6902 mask = BIT_ULL(POWER_DOMAIN_PIPE(pipe));
6903 mask |= BIT_ULL(POWER_DOMAIN_TRANSCODER(transcoder));
6904 if (crtc_state->pch_pfit.enabled ||
6905 crtc_state->pch_pfit.force_thru)
6906 mask |= BIT_ULL(POWER_DOMAIN_PIPE_PANEL_FITTER(pipe));
6908 drm_for_each_encoder_mask(encoder, &dev_priv->drm,
6909 crtc_state->base.encoder_mask) {
6910 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
6912 mask |= BIT_ULL(intel_encoder->power_domain);
6915 if (HAS_DDI(dev_priv) && crtc_state->has_audio)
6916 mask |= BIT_ULL(POWER_DOMAIN_AUDIO);
6918 if (crtc_state->shared_dpll)
6919 mask |= BIT_ULL(POWER_DOMAIN_DISPLAY_CORE);
6925 modeset_get_crtc_power_domains(struct intel_crtc_state *crtc_state)
6927 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
6928 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
6929 enum intel_display_power_domain domain;
6930 u64 domains, new_domains, old_domains;
6932 old_domains = crtc->enabled_power_domains;
6933 crtc->enabled_power_domains = new_domains =
6934 get_crtc_power_domains(crtc_state);
6936 domains = new_domains & ~old_domains;
6938 for_each_power_domain(domain, domains)
6939 intel_display_power_get(dev_priv, domain);
6941 return old_domains & ~new_domains;
6944 static void modeset_put_power_domains(struct drm_i915_private *dev_priv,
6947 enum intel_display_power_domain domain;
6949 for_each_power_domain(domain, domains)
6950 intel_display_power_put_unchecked(dev_priv, domain);
6953 static void valleyview_crtc_enable(struct intel_crtc_state *pipe_config,
6954 struct intel_atomic_state *state)
6956 struct drm_crtc *crtc = pipe_config->base.crtc;
6957 struct drm_device *dev = crtc->dev;
6958 struct drm_i915_private *dev_priv = to_i915(dev);
6959 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
6960 enum pipe pipe = intel_crtc->pipe;
6962 if (WARN_ON(intel_crtc->active))
6965 if (intel_crtc_has_dp_encoder(pipe_config))
6966 intel_dp_set_m_n(pipe_config, M1_N1);
6968 intel_set_pipe_timings(pipe_config);
6969 intel_set_pipe_src_size(pipe_config);
6971 if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B) {
6972 I915_WRITE(CHV_BLEND(pipe), CHV_BLEND_LEGACY);
6973 I915_WRITE(CHV_CANVAS(pipe), 0);
6976 i9xx_set_pipeconf(pipe_config);
6978 intel_crtc->active = true;
6980 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
6982 intel_encoders_pre_pll_enable(intel_crtc, pipe_config, state);
6984 if (IS_CHERRYVIEW(dev_priv)) {
6985 chv_prepare_pll(intel_crtc, pipe_config);
6986 chv_enable_pll(intel_crtc, pipe_config);
6988 vlv_prepare_pll(intel_crtc, pipe_config);
6989 vlv_enable_pll(intel_crtc, pipe_config);
6992 intel_encoders_pre_enable(intel_crtc, pipe_config, state);
6994 i9xx_pfit_enable(pipe_config);
6996 intel_color_load_luts(pipe_config);
6997 intel_color_commit(pipe_config);
6998 /* update DSPCNTR to configure gamma for pipe bottom color */
6999 intel_disable_primary_plane(pipe_config);
7001 dev_priv->display.initial_watermarks(state, pipe_config);
7002 intel_enable_pipe(pipe_config);
7004 assert_vblank_disabled(crtc);
7005 intel_crtc_vblank_on(pipe_config);
7007 intel_encoders_enable(intel_crtc, pipe_config, state);
7010 static void i9xx_set_pll_dividers(const struct intel_crtc_state *crtc_state)
7012 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
7013 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
7015 I915_WRITE(FP0(crtc->pipe), crtc_state->dpll_hw_state.fp0);
7016 I915_WRITE(FP1(crtc->pipe), crtc_state->dpll_hw_state.fp1);
7019 static void i9xx_crtc_enable(struct intel_crtc_state *pipe_config,
7020 struct intel_atomic_state *state)
7022 struct drm_crtc *crtc = pipe_config->base.crtc;
7023 struct drm_device *dev = crtc->dev;
7024 struct drm_i915_private *dev_priv = to_i915(dev);
7025 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7026 enum pipe pipe = intel_crtc->pipe;
7028 if (WARN_ON(intel_crtc->active))
7031 i9xx_set_pll_dividers(pipe_config);
7033 if (intel_crtc_has_dp_encoder(pipe_config))
7034 intel_dp_set_m_n(pipe_config, M1_N1);
7036 intel_set_pipe_timings(pipe_config);
7037 intel_set_pipe_src_size(pipe_config);
7039 i9xx_set_pipeconf(pipe_config);
7041 intel_crtc->active = true;
7043 if (!IS_GEN(dev_priv, 2))
7044 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
7046 intel_encoders_pre_enable(intel_crtc, pipe_config, state);
7048 i9xx_enable_pll(intel_crtc, pipe_config);
7050 i9xx_pfit_enable(pipe_config);
7052 intel_color_load_luts(pipe_config);
7053 intel_color_commit(pipe_config);
7054 /* update DSPCNTR to configure gamma for pipe bottom color */
7055 intel_disable_primary_plane(pipe_config);
7057 if (dev_priv->display.initial_watermarks != NULL)
7058 dev_priv->display.initial_watermarks(state,
7061 intel_update_watermarks(intel_crtc);
7062 intel_enable_pipe(pipe_config);
7064 assert_vblank_disabled(crtc);
7065 intel_crtc_vblank_on(pipe_config);
7067 intel_encoders_enable(intel_crtc, pipe_config, state);
7070 static void i9xx_pfit_disable(const struct intel_crtc_state *old_crtc_state)
7072 struct intel_crtc *crtc = to_intel_crtc(old_crtc_state->base.crtc);
7073 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
7075 if (!old_crtc_state->gmch_pfit.control)
7078 assert_pipe_disabled(dev_priv, crtc->pipe);
7080 DRM_DEBUG_KMS("disabling pfit, current: 0x%08x\n",
7081 I915_READ(PFIT_CONTROL));
7082 I915_WRITE(PFIT_CONTROL, 0);
7085 static void i9xx_crtc_disable(struct intel_crtc_state *old_crtc_state,
7086 struct intel_atomic_state *state)
7088 struct drm_crtc *crtc = old_crtc_state->base.crtc;
7089 struct drm_device *dev = crtc->dev;
7090 struct drm_i915_private *dev_priv = to_i915(dev);
7091 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7092 enum pipe pipe = intel_crtc->pipe;
7095 * On gen2 planes are double buffered but the pipe isn't, so we must
7096 * wait for planes to fully turn off before disabling the pipe.
7098 if (IS_GEN(dev_priv, 2))
7099 intel_wait_for_vblank(dev_priv, pipe);
7101 intel_encoders_disable(intel_crtc, old_crtc_state, state);
7103 drm_crtc_vblank_off(crtc);
7104 assert_vblank_disabled(crtc);
7106 intel_disable_pipe(old_crtc_state);
7108 i9xx_pfit_disable(old_crtc_state);
7110 intel_encoders_post_disable(intel_crtc, old_crtc_state, state);
7112 if (!intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_DSI)) {
7113 if (IS_CHERRYVIEW(dev_priv))
7114 chv_disable_pll(dev_priv, pipe);
7115 else if (IS_VALLEYVIEW(dev_priv))
7116 vlv_disable_pll(dev_priv, pipe);
7118 i9xx_disable_pll(old_crtc_state);
7121 intel_encoders_post_pll_disable(intel_crtc, old_crtc_state, state);
7123 if (!IS_GEN(dev_priv, 2))
7124 intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, false);
7126 if (!dev_priv->display.initial_watermarks)
7127 intel_update_watermarks(intel_crtc);
7129 /* clock the pipe down to 640x480@60 to potentially save power */
7130 if (IS_I830(dev_priv))
7131 i830_enable_pipe(dev_priv, pipe);
7134 static void intel_crtc_disable_noatomic(struct drm_crtc *crtc,
7135 struct drm_modeset_acquire_ctx *ctx)
7137 struct intel_encoder *encoder;
7138 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
7139 struct drm_i915_private *dev_priv = to_i915(crtc->dev);
7140 struct intel_bw_state *bw_state =
7141 to_intel_bw_state(dev_priv->bw_obj.state);
7142 enum intel_display_power_domain domain;
7143 struct intel_plane *plane;
7145 struct drm_atomic_state *state;
7146 struct intel_crtc_state *crtc_state;
7149 if (!intel_crtc->active)
7152 for_each_intel_plane_on_crtc(&dev_priv->drm, intel_crtc, plane) {
7153 const struct intel_plane_state *plane_state =
7154 to_intel_plane_state(plane->base.state);
7156 if (plane_state->base.visible)
7157 intel_plane_disable_noatomic(intel_crtc, plane);
7160 state = drm_atomic_state_alloc(crtc->dev);
7162 DRM_DEBUG_KMS("failed to disable [CRTC:%d:%s], out of memory",
7163 crtc->base.id, crtc->name);
7167 state->acquire_ctx = ctx;
7169 /* Everything's already locked, -EDEADLK can't happen. */
7170 crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
7171 ret = drm_atomic_add_affected_connectors(state, crtc);
7173 WARN_ON(IS_ERR(crtc_state) || ret);
7175 dev_priv->display.crtc_disable(crtc_state, to_intel_atomic_state(state));
7177 drm_atomic_state_put(state);
7179 DRM_DEBUG_KMS("[CRTC:%d:%s] hw state adjusted, was enabled, now disabled\n",
7180 crtc->base.id, crtc->name);
7182 WARN_ON(drm_atomic_set_mode_for_crtc(crtc->state, NULL) < 0);
7183 crtc->state->active = false;
7184 intel_crtc->active = false;
7185 crtc->enabled = false;
7186 crtc->state->connector_mask = 0;
7187 crtc->state->encoder_mask = 0;
7189 for_each_encoder_on_crtc(crtc->dev, crtc, encoder)
7190 encoder->base.crtc = NULL;
7192 intel_fbc_disable(intel_crtc);
7193 intel_update_watermarks(intel_crtc);
7194 intel_disable_shared_dpll(to_intel_crtc_state(crtc->state));
7196 domains = intel_crtc->enabled_power_domains;
7197 for_each_power_domain(domain, domains)
7198 intel_display_power_put_unchecked(dev_priv, domain);
7199 intel_crtc->enabled_power_domains = 0;
7201 dev_priv->active_pipes &= ~BIT(intel_crtc->pipe);
7202 dev_priv->min_cdclk[intel_crtc->pipe] = 0;
7203 dev_priv->min_voltage_level[intel_crtc->pipe] = 0;
7205 bw_state->data_rate[intel_crtc->pipe] = 0;
7206 bw_state->num_active_planes[intel_crtc->pipe] = 0;
7210 * turn all crtc's off, but do not adjust state
7211 * This has to be paired with a call to intel_modeset_setup_hw_state.
7213 int intel_display_suspend(struct drm_device *dev)
7215 struct drm_i915_private *dev_priv = to_i915(dev);
7216 struct drm_atomic_state *state;
7219 state = drm_atomic_helper_suspend(dev);
7220 ret = PTR_ERR_OR_ZERO(state);
7222 DRM_ERROR("Suspending crtc's failed with %i\n", ret);
7224 dev_priv->modeset_restore_state = state;
7228 void intel_encoder_destroy(struct drm_encoder *encoder)
7230 struct intel_encoder *intel_encoder = to_intel_encoder(encoder);
7232 drm_encoder_cleanup(encoder);
7233 kfree(intel_encoder);
7236 /* Cross check the actual hw state with our own modeset state tracking (and it's
7237 * internal consistency). */
7238 static void intel_connector_verify_state(struct intel_crtc_state *crtc_state,
7239 struct drm_connector_state *conn_state)
7241 struct intel_connector *connector = to_intel_connector(conn_state->connector);
7243 DRM_DEBUG_KMS("[CONNECTOR:%d:%s]\n",
7244 connector->base.base.id,
7245 connector->base.name);
7247 if (connector->get_hw_state(connector)) {
7248 struct intel_encoder *encoder = connector->encoder;
7250 I915_STATE_WARN(!crtc_state,
7251 "connector enabled without attached crtc\n");
7256 I915_STATE_WARN(!crtc_state->base.active,
7257 "connector is active, but attached crtc isn't\n");
7259 if (!encoder || encoder->type == INTEL_OUTPUT_DP_MST)
7262 I915_STATE_WARN(conn_state->best_encoder != &encoder->base,
7263 "atomic encoder doesn't match attached encoder\n");
7265 I915_STATE_WARN(conn_state->crtc != encoder->base.crtc,
7266 "attached encoder crtc differs from connector crtc\n");
7268 I915_STATE_WARN(crtc_state && crtc_state->base.active,
7269 "attached crtc is active, but connector isn't\n");
7270 I915_STATE_WARN(!crtc_state && conn_state->best_encoder,
7271 "best encoder set without crtc!\n");
7275 static int pipe_required_fdi_lanes(struct intel_crtc_state *crtc_state)
7277 if (crtc_state->base.enable && crtc_state->has_pch_encoder)
7278 return crtc_state->fdi_lanes;
7283 static int ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe,
7284 struct intel_crtc_state *pipe_config)
7286 struct drm_i915_private *dev_priv = to_i915(dev);
7287 struct drm_atomic_state *state = pipe_config->base.state;
7288 struct intel_crtc *other_crtc;
7289 struct intel_crtc_state *other_crtc_state;
7291 DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n",
7292 pipe_name(pipe), pipe_config->fdi_lanes);
7293 if (pipe_config->fdi_lanes > 4) {
7294 DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n",
7295 pipe_name(pipe), pipe_config->fdi_lanes);
7299 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
7300 if (pipe_config->fdi_lanes > 2) {
7301 DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n",
7302 pipe_config->fdi_lanes);
7309 if (INTEL_NUM_PIPES(dev_priv) == 2)
7312 /* Ivybridge 3 pipe is really complicated */
7317 if (pipe_config->fdi_lanes <= 2)
7320 other_crtc = intel_get_crtc_for_pipe(dev_priv, PIPE_C);
7322 intel_atomic_get_crtc_state(state, other_crtc);
7323 if (IS_ERR(other_crtc_state))
7324 return PTR_ERR(other_crtc_state);
7326 if (pipe_required_fdi_lanes(other_crtc_state) > 0) {
7327 DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n",
7328 pipe_name(pipe), pipe_config->fdi_lanes);
7333 if (pipe_config->fdi_lanes > 2) {
7334 DRM_DEBUG_KMS("only 2 lanes on pipe %c: required %i lanes\n",
7335 pipe_name(pipe), pipe_config->fdi_lanes);
7339 other_crtc = intel_get_crtc_for_pipe(dev_priv, PIPE_B);
7341 intel_atomic_get_crtc_state(state, other_crtc);
7342 if (IS_ERR(other_crtc_state))
7343 return PTR_ERR(other_crtc_state);
7345 if (pipe_required_fdi_lanes(other_crtc_state) > 2) {
7346 DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n");
7356 static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc,
7357 struct intel_crtc_state *pipe_config)
7359 struct drm_device *dev = intel_crtc->base.dev;
7360 const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
7361 int lane, link_bw, fdi_dotclock, ret;
7362 bool needs_recompute = false;
7365 /* FDI is a binary signal running at ~2.7GHz, encoding
7366 * each output octet as 10 bits. The actual frequency
7367 * is stored as a divider into a 100MHz clock, and the
7368 * mode pixel clock is stored in units of 1KHz.
7369 * Hence the bw of each lane in terms of the mode signal
7372 link_bw = intel_fdi_link_freq(to_i915(dev), pipe_config);
7374 fdi_dotclock = adjusted_mode->crtc_clock;
7376 lane = ironlake_get_lanes_required(fdi_dotclock, link_bw,
7377 pipe_config->pipe_bpp);
7379 pipe_config->fdi_lanes = lane;
7381 intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock,
7382 link_bw, &pipe_config->fdi_m_n, false, false);
7384 ret = ironlake_check_fdi_lanes(dev, intel_crtc->pipe, pipe_config);
7385 if (ret == -EDEADLK)
7388 if (ret == -EINVAL && pipe_config->pipe_bpp > 6*3) {
7389 pipe_config->pipe_bpp -= 2*3;
7390 DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n",
7391 pipe_config->pipe_bpp);
7392 needs_recompute = true;
7393 pipe_config->bw_constrained = true;
7398 if (needs_recompute)
7404 bool hsw_crtc_state_ips_capable(const struct intel_crtc_state *crtc_state)
7406 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
7407 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
7409 /* IPS only exists on ULT machines and is tied to pipe A. */
7410 if (!hsw_crtc_supports_ips(crtc))
7413 if (!i915_modparams.enable_ips)
7416 if (crtc_state->pipe_bpp > 24)
7420 * We compare against max which means we must take
7421 * the increased cdclk requirement into account when
7422 * calculating the new cdclk.
7424 * Should measure whether using a lower cdclk w/o IPS
7426 if (IS_BROADWELL(dev_priv) &&
7427 crtc_state->pixel_rate > dev_priv->max_cdclk_freq * 95 / 100)
7433 static bool hsw_compute_ips_config(struct intel_crtc_state *crtc_state)
7435 struct drm_i915_private *dev_priv =
7436 to_i915(crtc_state->base.crtc->dev);
7437 struct intel_atomic_state *intel_state =
7438 to_intel_atomic_state(crtc_state->base.state);
7440 if (!hsw_crtc_state_ips_capable(crtc_state))
7444 * When IPS gets enabled, the pipe CRC changes. Since IPS gets
7445 * enabled and disabled dynamically based on package C states,
7446 * user space can't make reliable use of the CRCs, so let's just
7447 * completely disable it.
7449 if (crtc_state->crc_enabled)
7452 /* IPS should be fine as long as at least one plane is enabled. */
7453 if (!(crtc_state->active_planes & ~BIT(PLANE_CURSOR)))
7456 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
7457 if (IS_BROADWELL(dev_priv) &&
7458 crtc_state->pixel_rate > intel_state->cdclk.logical.cdclk * 95 / 100)
7464 static bool intel_crtc_supports_double_wide(const struct intel_crtc *crtc)
7466 const struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
7468 /* GDG double wide on either pipe, otherwise pipe A only */
7469 return INTEL_GEN(dev_priv) < 4 &&
7470 (crtc->pipe == PIPE_A || IS_I915G(dev_priv));
7473 static u32 ilk_pipe_pixel_rate(const struct intel_crtc_state *pipe_config)
7477 pixel_rate = pipe_config->base.adjusted_mode.crtc_clock;
7480 * We only use IF-ID interlacing. If we ever use
7481 * PF-ID we'll need to adjust the pixel_rate here.
7484 if (pipe_config->pch_pfit.enabled) {
7485 u64 pipe_w, pipe_h, pfit_w, pfit_h;
7486 u32 pfit_size = pipe_config->pch_pfit.size;
7488 pipe_w = pipe_config->pipe_src_w;
7489 pipe_h = pipe_config->pipe_src_h;
7491 pfit_w = (pfit_size >> 16) & 0xFFFF;
7492 pfit_h = pfit_size & 0xFFFF;
7493 if (pipe_w < pfit_w)
7495 if (pipe_h < pfit_h)
7498 if (WARN_ON(!pfit_w || !pfit_h))
7501 pixel_rate = div_u64(mul_u32_u32(pixel_rate, pipe_w * pipe_h),
7508 static void intel_crtc_compute_pixel_rate(struct intel_crtc_state *crtc_state)
7510 struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
7512 if (HAS_GMCH(dev_priv))
7513 /* FIXME calculate proper pipe pixel rate for GMCH pfit */
7514 crtc_state->pixel_rate =
7515 crtc_state->base.adjusted_mode.crtc_clock;
7517 crtc_state->pixel_rate =
7518 ilk_pipe_pixel_rate(crtc_state);
7521 static int intel_crtc_compute_config(struct intel_crtc *crtc,
7522 struct intel_crtc_state *pipe_config)
7524 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
7525 const struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
7526 int clock_limit = dev_priv->max_dotclk_freq;
7528 if (INTEL_GEN(dev_priv) < 4) {
7529 clock_limit = dev_priv->max_cdclk_freq * 9 / 10;
7532 * Enable double wide mode when the dot clock
7533 * is > 90% of the (display) core speed.
7535 if (intel_crtc_supports_double_wide(crtc) &&
7536 adjusted_mode->crtc_clock > clock_limit) {
7537 clock_limit = dev_priv->max_dotclk_freq;
7538 pipe_config->double_wide = true;
7542 if (adjusted_mode->crtc_clock > clock_limit) {
7543 DRM_DEBUG_KMS("requested pixel clock (%d kHz) too high (max: %d kHz, double wide: %s)\n",
7544 adjusted_mode->crtc_clock, clock_limit,
7545 yesno(pipe_config->double_wide));
7549 if ((pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
7550 pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444) &&
7551 pipe_config->base.ctm) {
7553 * There is only one pipe CSC unit per pipe, and we need that
7554 * for output conversion from RGB->YCBCR. So if CTM is already
7555 * applied we can't support YCBCR420 output.
7557 DRM_DEBUG_KMS("YCBCR420 and CTM together are not possible\n");
7562 * Pipe horizontal size must be even in:
7564 * - LVDS dual channel mode
7565 * - Double wide pipe
7567 if (pipe_config->pipe_src_w & 1) {
7568 if (pipe_config->double_wide) {
7569 DRM_DEBUG_KMS("Odd pipe source width not supported with double wide pipe\n");
7573 if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_LVDS) &&
7574 intel_is_dual_link_lvds(dev_priv)) {
7575 DRM_DEBUG_KMS("Odd pipe source width not supported with dual link LVDS\n");
7580 /* Cantiga+ cannot handle modes with a hsync front porch of 0.
7581 * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw.
7583 if ((INTEL_GEN(dev_priv) > 4 || IS_G4X(dev_priv)) &&
7584 adjusted_mode->crtc_hsync_start == adjusted_mode->crtc_hdisplay)
7587 intel_crtc_compute_pixel_rate(pipe_config);
7589 if (pipe_config->has_pch_encoder)
7590 return ironlake_fdi_compute_config(crtc, pipe_config);
7596 intel_reduce_m_n_ratio(u32 *num, u32 *den)
7598 while (*num > DATA_LINK_M_N_MASK ||
7599 *den > DATA_LINK_M_N_MASK) {
7605 static void compute_m_n(unsigned int m, unsigned int n,
7606 u32 *ret_m, u32 *ret_n,
7610 * Several DP dongles in particular seem to be fussy about
7611 * too large link M/N values. Give N value as 0x8000 that
7612 * should be acceptable by specific devices. 0x8000 is the
7613 * specified fixed N value for asynchronous clock mode,
7614 * which the devices expect also in synchronous clock mode.
7619 *ret_n = min_t(unsigned int, roundup_pow_of_two(n), DATA_LINK_N_MAX);
7621 *ret_m = div_u64(mul_u32_u32(m, *ret_n), n);
7622 intel_reduce_m_n_ratio(ret_m, ret_n);
7626 intel_link_compute_m_n(u16 bits_per_pixel, int nlanes,
7627 int pixel_clock, int link_clock,
7628 struct intel_link_m_n *m_n,
7629 bool constant_n, bool fec_enable)
7631 u32 data_clock = bits_per_pixel * pixel_clock;
7634 data_clock = intel_dp_mode_to_fec_clock(data_clock);
7637 compute_m_n(data_clock,
7638 link_clock * nlanes * 8,
7639 &m_n->gmch_m, &m_n->gmch_n,
7642 compute_m_n(pixel_clock, link_clock,
7643 &m_n->link_m, &m_n->link_n,
7647 static void intel_panel_sanitize_ssc(struct drm_i915_private *dev_priv)
7650 * There may be no VBT; and if the BIOS enabled SSC we can
7651 * just keep using it to avoid unnecessary flicker. Whereas if the
7652 * BIOS isn't using it, don't assume it will work even if the VBT
7653 * indicates as much.
7655 if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv)) {
7656 bool bios_lvds_use_ssc = I915_READ(PCH_DREF_CONTROL) &
7659 if (dev_priv->vbt.lvds_use_ssc != bios_lvds_use_ssc) {
7660 DRM_DEBUG_KMS("SSC %s by BIOS, overriding VBT which says %s\n",
7661 enableddisabled(bios_lvds_use_ssc),
7662 enableddisabled(dev_priv->vbt.lvds_use_ssc));
7663 dev_priv->vbt.lvds_use_ssc = bios_lvds_use_ssc;
7668 static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv)
7670 if (i915_modparams.panel_use_ssc >= 0)
7671 return i915_modparams.panel_use_ssc != 0;
7672 return dev_priv->vbt.lvds_use_ssc
7673 && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE);
7676 static u32 pnv_dpll_compute_fp(struct dpll *dpll)
7678 return (1 << dpll->n) << 16 | dpll->m2;
7681 static u32 i9xx_dpll_compute_fp(struct dpll *dpll)
7683 return dpll->n << 16 | dpll->m1 << 8 | dpll->m2;
7686 static void i9xx_update_pll_dividers(struct intel_crtc *crtc,
7687 struct intel_crtc_state *crtc_state,
7688 struct dpll *reduced_clock)
7690 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
7693 if (IS_PINEVIEW(dev_priv)) {
7694 fp = pnv_dpll_compute_fp(&crtc_state->dpll);
7696 fp2 = pnv_dpll_compute_fp(reduced_clock);
7698 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
7700 fp2 = i9xx_dpll_compute_fp(reduced_clock);
7703 crtc_state->dpll_hw_state.fp0 = fp;
7705 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
7707 crtc_state->dpll_hw_state.fp1 = fp2;
7709 crtc_state->dpll_hw_state.fp1 = fp;
7713 static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe
7719 * PLLB opamp always calibrates to max value of 0x3f, force enable it
7720 * and set it to a reasonable value instead.
7722 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
7723 reg_val &= 0xffffff00;
7724 reg_val |= 0x00000030;
7725 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
7727 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
7728 reg_val &= 0x00ffffff;
7729 reg_val |= 0x8c000000;
7730 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
7732 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1));
7733 reg_val &= 0xffffff00;
7734 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val);
7736 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13);
7737 reg_val &= 0x00ffffff;
7738 reg_val |= 0xb0000000;
7739 vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val);
7742 static void intel_pch_transcoder_set_m_n(const struct intel_crtc_state *crtc_state,
7743 const struct intel_link_m_n *m_n)
7745 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
7746 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
7747 enum pipe pipe = crtc->pipe;
7749 I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
7750 I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n);
7751 I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m);
7752 I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n);
7755 static bool transcoder_has_m2_n2(struct drm_i915_private *dev_priv,
7756 enum transcoder transcoder)
7758 if (IS_HASWELL(dev_priv))
7759 return transcoder == TRANSCODER_EDP;
7762 * Strictly speaking some registers are available before
7763 * gen7, but we only support DRRS on gen7+
7765 return IS_GEN(dev_priv, 7) || IS_CHERRYVIEW(dev_priv);
7768 static void intel_cpu_transcoder_set_m_n(const struct intel_crtc_state *crtc_state,
7769 const struct intel_link_m_n *m_n,
7770 const struct intel_link_m_n *m2_n2)
7772 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
7773 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
7774 enum pipe pipe = crtc->pipe;
7775 enum transcoder transcoder = crtc_state->cpu_transcoder;
7777 if (INTEL_GEN(dev_priv) >= 5) {
7778 I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m);
7779 I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n);
7780 I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m);
7781 I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n);
7783 * M2_N2 registers are set only if DRRS is supported
7784 * (to make sure the registers are not unnecessarily accessed).
7786 if (m2_n2 && crtc_state->has_drrs &&
7787 transcoder_has_m2_n2(dev_priv, transcoder)) {
7788 I915_WRITE(PIPE_DATA_M2(transcoder),
7789 TU_SIZE(m2_n2->tu) | m2_n2->gmch_m);
7790 I915_WRITE(PIPE_DATA_N2(transcoder), m2_n2->gmch_n);
7791 I915_WRITE(PIPE_LINK_M2(transcoder), m2_n2->link_m);
7792 I915_WRITE(PIPE_LINK_N2(transcoder), m2_n2->link_n);
7795 I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m);
7796 I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n);
7797 I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m);
7798 I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n);
7802 void intel_dp_set_m_n(const struct intel_crtc_state *crtc_state, enum link_m_n_set m_n)
7804 const struct intel_link_m_n *dp_m_n, *dp_m2_n2 = NULL;
7807 dp_m_n = &crtc_state->dp_m_n;
7808 dp_m2_n2 = &crtc_state->dp_m2_n2;
7809 } else if (m_n == M2_N2) {
7812 * M2_N2 registers are not supported. Hence m2_n2 divider value
7813 * needs to be programmed into M1_N1.
7815 dp_m_n = &crtc_state->dp_m2_n2;
7817 DRM_ERROR("Unsupported divider value\n");
7821 if (crtc_state->has_pch_encoder)
7822 intel_pch_transcoder_set_m_n(crtc_state, &crtc_state->dp_m_n);
7824 intel_cpu_transcoder_set_m_n(crtc_state, dp_m_n, dp_m2_n2);
7827 static void vlv_compute_dpll(struct intel_crtc *crtc,
7828 struct intel_crtc_state *pipe_config)
7830 pipe_config->dpll_hw_state.dpll = DPLL_INTEGRATED_REF_CLK_VLV |
7831 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
7832 if (crtc->pipe != PIPE_A)
7833 pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
7835 /* DPLL not used with DSI, but still need the rest set up */
7836 if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
7837 pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE |
7838 DPLL_EXT_BUFFER_ENABLE_VLV;
7840 pipe_config->dpll_hw_state.dpll_md =
7841 (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7844 static void chv_compute_dpll(struct intel_crtc *crtc,
7845 struct intel_crtc_state *pipe_config)
7847 pipe_config->dpll_hw_state.dpll = DPLL_SSC_REF_CLK_CHV |
7848 DPLL_REF_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS;
7849 if (crtc->pipe != PIPE_A)
7850 pipe_config->dpll_hw_state.dpll |= DPLL_INTEGRATED_CRI_CLK_VLV;
7852 /* DPLL not used with DSI, but still need the rest set up */
7853 if (!intel_crtc_has_type(pipe_config, INTEL_OUTPUT_DSI))
7854 pipe_config->dpll_hw_state.dpll |= DPLL_VCO_ENABLE;
7856 pipe_config->dpll_hw_state.dpll_md =
7857 (pipe_config->pixel_multiplier - 1) << DPLL_MD_UDI_MULTIPLIER_SHIFT;
7860 static void vlv_prepare_pll(struct intel_crtc *crtc,
7861 const struct intel_crtc_state *pipe_config)
7863 struct drm_device *dev = crtc->base.dev;
7864 struct drm_i915_private *dev_priv = to_i915(dev);
7865 enum pipe pipe = crtc->pipe;
7867 u32 bestn, bestm1, bestm2, bestp1, bestp2;
7868 u32 coreclk, reg_val;
7871 I915_WRITE(DPLL(pipe),
7872 pipe_config->dpll_hw_state.dpll &
7873 ~(DPLL_VCO_ENABLE | DPLL_EXT_BUFFER_ENABLE_VLV));
7875 /* No need to actually set up the DPLL with DSI */
7876 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
7879 vlv_dpio_get(dev_priv);
7881 bestn = pipe_config->dpll.n;
7882 bestm1 = pipe_config->dpll.m1;
7883 bestm2 = pipe_config->dpll.m2;
7884 bestp1 = pipe_config->dpll.p1;
7885 bestp2 = pipe_config->dpll.p2;
7887 /* See eDP HDMI DPIO driver vbios notes doc */
7889 /* PLL B needs special handling */
7891 vlv_pllb_recal_opamp(dev_priv, pipe);
7893 /* Set up Tx target for periodic Rcomp update */
7894 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f);
7896 /* Disable target IRef on PLL */
7897 reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe));
7898 reg_val &= 0x00ffffff;
7899 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val);
7901 /* Disable fast lock */
7902 vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610);
7904 /* Set idtafcrecal before PLL is enabled */
7905 mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK));
7906 mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT));
7907 mdiv |= ((bestn << DPIO_N_SHIFT));
7908 mdiv |= (1 << DPIO_K_SHIFT);
7911 * Post divider depends on pixel clock rate, DAC vs digital (and LVDS,
7912 * but we don't support that).
7913 * Note: don't use the DAC post divider as it seems unstable.
7915 mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT);
7916 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
7918 mdiv |= DPIO_ENABLE_CALIBRATION;
7919 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv);
7921 /* Set HBR and RBR LPF coefficients */
7922 if (pipe_config->port_clock == 162000 ||
7923 intel_crtc_has_type(pipe_config, INTEL_OUTPUT_ANALOG) ||
7924 intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI))
7925 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
7928 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe),
7931 if (intel_crtc_has_dp_encoder(pipe_config)) {
7932 /* Use SSC source */
7934 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7937 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7939 } else { /* HDMI or VGA */
7940 /* Use bend source */
7942 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7945 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe),
7949 coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe));
7950 coreclk = (coreclk & 0x0000ff00) | 0x01c00000;
7951 if (intel_crtc_has_dp_encoder(pipe_config))
7952 coreclk |= 0x01000000;
7953 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk);
7955 vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000);
7957 vlv_dpio_put(dev_priv);
7960 static void chv_prepare_pll(struct intel_crtc *crtc,
7961 const struct intel_crtc_state *pipe_config)
7963 struct drm_device *dev = crtc->base.dev;
7964 struct drm_i915_private *dev_priv = to_i915(dev);
7965 enum pipe pipe = crtc->pipe;
7966 enum dpio_channel port = vlv_pipe_to_channel(pipe);
7967 u32 loopfilter, tribuf_calcntr;
7968 u32 bestn, bestm1, bestm2, bestp1, bestp2, bestm2_frac;
7972 /* Enable Refclk and SSC */
7973 I915_WRITE(DPLL(pipe),
7974 pipe_config->dpll_hw_state.dpll & ~DPLL_VCO_ENABLE);
7976 /* No need to actually set up the DPLL with DSI */
7977 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
7980 bestn = pipe_config->dpll.n;
7981 bestm2_frac = pipe_config->dpll.m2 & 0x3fffff;
7982 bestm1 = pipe_config->dpll.m1;
7983 bestm2 = pipe_config->dpll.m2 >> 22;
7984 bestp1 = pipe_config->dpll.p1;
7985 bestp2 = pipe_config->dpll.p2;
7986 vco = pipe_config->dpll.vco;
7990 vlv_dpio_get(dev_priv);
7992 /* p1 and p2 divider */
7993 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW13(port),
7994 5 << DPIO_CHV_S1_DIV_SHIFT |
7995 bestp1 << DPIO_CHV_P1_DIV_SHIFT |
7996 bestp2 << DPIO_CHV_P2_DIV_SHIFT |
7997 1 << DPIO_CHV_K_DIV_SHIFT);
7999 /* Feedback post-divider - m2 */
8000 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW0(port), bestm2);
8002 /* Feedback refclk divider - n and m1 */
8003 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW1(port),
8004 DPIO_CHV_M1_DIV_BY_2 |
8005 1 << DPIO_CHV_N_DIV_SHIFT);
8007 /* M2 fraction division */
8008 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW2(port), bestm2_frac);
8010 /* M2 fraction division enable */
8011 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
8012 dpio_val &= ~(DPIO_CHV_FEEDFWD_GAIN_MASK | DPIO_CHV_FRAC_DIV_EN);
8013 dpio_val |= (2 << DPIO_CHV_FEEDFWD_GAIN_SHIFT);
8015 dpio_val |= DPIO_CHV_FRAC_DIV_EN;
8016 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW3(port), dpio_val);
8018 /* Program digital lock detect threshold */
8019 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW9(port));
8020 dpio_val &= ~(DPIO_CHV_INT_LOCK_THRESHOLD_MASK |
8021 DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE);
8022 dpio_val |= (0x5 << DPIO_CHV_INT_LOCK_THRESHOLD_SHIFT);
8024 dpio_val |= DPIO_CHV_INT_LOCK_THRESHOLD_SEL_COARSE;
8025 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW9(port), dpio_val);
8028 if (vco == 5400000) {
8029 loopfilter |= (0x3 << DPIO_CHV_PROP_COEFF_SHIFT);
8030 loopfilter |= (0x8 << DPIO_CHV_INT_COEFF_SHIFT);
8031 loopfilter |= (0x1 << DPIO_CHV_GAIN_CTRL_SHIFT);
8032 tribuf_calcntr = 0x9;
8033 } else if (vco <= 6200000) {
8034 loopfilter |= (0x5 << DPIO_CHV_PROP_COEFF_SHIFT);
8035 loopfilter |= (0xB << DPIO_CHV_INT_COEFF_SHIFT);
8036 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
8037 tribuf_calcntr = 0x9;
8038 } else if (vco <= 6480000) {
8039 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
8040 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
8041 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
8042 tribuf_calcntr = 0x8;
8044 /* Not supported. Apply the same limits as in the max case */
8045 loopfilter |= (0x4 << DPIO_CHV_PROP_COEFF_SHIFT);
8046 loopfilter |= (0x9 << DPIO_CHV_INT_COEFF_SHIFT);
8047 loopfilter |= (0x3 << DPIO_CHV_GAIN_CTRL_SHIFT);
8050 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW6(port), loopfilter);
8052 dpio_val = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW8(port));
8053 dpio_val &= ~DPIO_CHV_TDC_TARGET_CNT_MASK;
8054 dpio_val |= (tribuf_calcntr << DPIO_CHV_TDC_TARGET_CNT_SHIFT);
8055 vlv_dpio_write(dev_priv, pipe, CHV_PLL_DW8(port), dpio_val);
8058 vlv_dpio_write(dev_priv, pipe, CHV_CMN_DW14(port),
8059 vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW14(port)) |
8062 vlv_dpio_put(dev_priv);
8066 * vlv_force_pll_on - forcibly enable just the PLL
8067 * @dev_priv: i915 private structure
8068 * @pipe: pipe PLL to enable
8069 * @dpll: PLL configuration
8071 * Enable the PLL for @pipe using the supplied @dpll config. To be used
8072 * in cases where we need the PLL enabled even when @pipe is not going to
8075 int vlv_force_pll_on(struct drm_i915_private *dev_priv, enum pipe pipe,
8076 const struct dpll *dpll)
8078 struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
8079 struct intel_crtc_state *pipe_config;
8081 pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL);
8085 pipe_config->base.crtc = &crtc->base;
8086 pipe_config->pixel_multiplier = 1;
8087 pipe_config->dpll = *dpll;
8089 if (IS_CHERRYVIEW(dev_priv)) {
8090 chv_compute_dpll(crtc, pipe_config);
8091 chv_prepare_pll(crtc, pipe_config);
8092 chv_enable_pll(crtc, pipe_config);
8094 vlv_compute_dpll(crtc, pipe_config);
8095 vlv_prepare_pll(crtc, pipe_config);
8096 vlv_enable_pll(crtc, pipe_config);
8105 * vlv_force_pll_off - forcibly disable just the PLL
8106 * @dev_priv: i915 private structure
8107 * @pipe: pipe PLL to disable
8109 * Disable the PLL for @pipe. To be used in cases where we need
8110 * the PLL enabled even when @pipe is not going to be enabled.
8112 void vlv_force_pll_off(struct drm_i915_private *dev_priv, enum pipe pipe)
8114 if (IS_CHERRYVIEW(dev_priv))
8115 chv_disable_pll(dev_priv, pipe);
8117 vlv_disable_pll(dev_priv, pipe);
8120 static void i9xx_compute_dpll(struct intel_crtc *crtc,
8121 struct intel_crtc_state *crtc_state,
8122 struct dpll *reduced_clock)
8124 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
8126 struct dpll *clock = &crtc_state->dpll;
8128 i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
8130 dpll = DPLL_VGA_MODE_DIS;
8132 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
8133 dpll |= DPLLB_MODE_LVDS;
8135 dpll |= DPLLB_MODE_DAC_SERIAL;
8137 if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) ||
8138 IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) {
8139 dpll |= (crtc_state->pixel_multiplier - 1)
8140 << SDVO_MULTIPLIER_SHIFT_HIRES;
8143 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
8144 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
8145 dpll |= DPLL_SDVO_HIGH_SPEED;
8147 if (intel_crtc_has_dp_encoder(crtc_state))
8148 dpll |= DPLL_SDVO_HIGH_SPEED;
8150 /* compute bitmask from p1 value */
8151 if (IS_PINEVIEW(dev_priv))
8152 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW;
8154 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
8155 if (IS_G4X(dev_priv) && reduced_clock)
8156 dpll |= (1 << (reduced_clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
8158 switch (clock->p2) {
8160 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
8163 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
8166 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
8169 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
8172 if (INTEL_GEN(dev_priv) >= 4)
8173 dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT);
8175 if (crtc_state->sdvo_tv_clock)
8176 dpll |= PLL_REF_INPUT_TVCLKINBC;
8177 else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
8178 intel_panel_use_ssc(dev_priv))
8179 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
8181 dpll |= PLL_REF_INPUT_DREFCLK;
8183 dpll |= DPLL_VCO_ENABLE;
8184 crtc_state->dpll_hw_state.dpll = dpll;
8186 if (INTEL_GEN(dev_priv) >= 4) {
8187 u32 dpll_md = (crtc_state->pixel_multiplier - 1)
8188 << DPLL_MD_UDI_MULTIPLIER_SHIFT;
8189 crtc_state->dpll_hw_state.dpll_md = dpll_md;
8193 static void i8xx_compute_dpll(struct intel_crtc *crtc,
8194 struct intel_crtc_state *crtc_state,
8195 struct dpll *reduced_clock)
8197 struct drm_device *dev = crtc->base.dev;
8198 struct drm_i915_private *dev_priv = to_i915(dev);
8200 struct dpll *clock = &crtc_state->dpll;
8202 i9xx_update_pll_dividers(crtc, crtc_state, reduced_clock);
8204 dpll = DPLL_VGA_MODE_DIS;
8206 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
8207 dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
8210 dpll |= PLL_P1_DIVIDE_BY_TWO;
8212 dpll |= (clock->p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT;
8214 dpll |= PLL_P2_DIVIDE_BY_4;
8219 * "[Almador Errata}: For the correct operation of the muxed DVO pins
8220 * (GDEVSELB/I2Cdata, GIRDBY/I2CClk) and (GFRAMEB/DVI_Data,
8221 * GTRDYB/DVI_Clk): Bit 31 (DPLL VCO Enable) and Bit 30 (2X Clock
8222 * Enable) must be set to “1” in both the DPLL A Control Register
8223 * (06014h-06017h) and DPLL B Control Register (06018h-0601Bh)."
8225 * For simplicity We simply keep both bits always enabled in
8226 * both DPLLS. The spec says we should disable the DVO 2X clock
8227 * when not needed, but this seems to work fine in practice.
8229 if (IS_I830(dev_priv) ||
8230 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO))
8231 dpll |= DPLL_DVO_2X_MODE;
8233 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
8234 intel_panel_use_ssc(dev_priv))
8235 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
8237 dpll |= PLL_REF_INPUT_DREFCLK;
8239 dpll |= DPLL_VCO_ENABLE;
8240 crtc_state->dpll_hw_state.dpll = dpll;
8243 static void intel_set_pipe_timings(const struct intel_crtc_state *crtc_state)
8245 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
8246 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
8247 enum pipe pipe = crtc->pipe;
8248 enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
8249 const struct drm_display_mode *adjusted_mode = &crtc_state->base.adjusted_mode;
8250 u32 crtc_vtotal, crtc_vblank_end;
8253 /* We need to be careful not to changed the adjusted mode, for otherwise
8254 * the hw state checker will get angry at the mismatch. */
8255 crtc_vtotal = adjusted_mode->crtc_vtotal;
8256 crtc_vblank_end = adjusted_mode->crtc_vblank_end;
8258 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) {
8259 /* the chip adds 2 halflines automatically */
8261 crtc_vblank_end -= 1;
8263 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO))
8264 vsyncshift = (adjusted_mode->crtc_htotal - 1) / 2;
8266 vsyncshift = adjusted_mode->crtc_hsync_start -
8267 adjusted_mode->crtc_htotal / 2;
8269 vsyncshift += adjusted_mode->crtc_htotal;
8272 if (INTEL_GEN(dev_priv) > 3)
8273 I915_WRITE(VSYNCSHIFT(cpu_transcoder), vsyncshift);
8275 I915_WRITE(HTOTAL(cpu_transcoder),
8276 (adjusted_mode->crtc_hdisplay - 1) |
8277 ((adjusted_mode->crtc_htotal - 1) << 16));
8278 I915_WRITE(HBLANK(cpu_transcoder),
8279 (adjusted_mode->crtc_hblank_start - 1) |
8280 ((adjusted_mode->crtc_hblank_end - 1) << 16));
8281 I915_WRITE(HSYNC(cpu_transcoder),
8282 (adjusted_mode->crtc_hsync_start - 1) |
8283 ((adjusted_mode->crtc_hsync_end - 1) << 16));
8285 I915_WRITE(VTOTAL(cpu_transcoder),
8286 (adjusted_mode->crtc_vdisplay - 1) |
8287 ((crtc_vtotal - 1) << 16));
8288 I915_WRITE(VBLANK(cpu_transcoder),
8289 (adjusted_mode->crtc_vblank_start - 1) |
8290 ((crtc_vblank_end - 1) << 16));
8291 I915_WRITE(VSYNC(cpu_transcoder),
8292 (adjusted_mode->crtc_vsync_start - 1) |
8293 ((adjusted_mode->crtc_vsync_end - 1) << 16));
8295 /* Workaround: when the EDP input selection is B, the VTOTAL_B must be
8296 * programmed with the VTOTAL_EDP value. Same for VTOTAL_C. This is
8297 * documented on the DDI_FUNC_CTL register description, EDP Input Select
8299 if (IS_HASWELL(dev_priv) && cpu_transcoder == TRANSCODER_EDP &&
8300 (pipe == PIPE_B || pipe == PIPE_C))
8301 I915_WRITE(VTOTAL(pipe), I915_READ(VTOTAL(cpu_transcoder)));
8305 static void intel_set_pipe_src_size(const struct intel_crtc_state *crtc_state)
8307 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
8308 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
8309 enum pipe pipe = crtc->pipe;
8311 /* pipesrc controls the size that is scaled from, which should
8312 * always be the user's requested size.
8314 I915_WRITE(PIPESRC(pipe),
8315 ((crtc_state->pipe_src_w - 1) << 16) |
8316 (crtc_state->pipe_src_h - 1));
8319 static bool intel_pipe_is_interlaced(const struct intel_crtc_state *crtc_state)
8321 struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
8322 enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
8324 if (IS_GEN(dev_priv, 2))
8327 if (INTEL_GEN(dev_priv) >= 9 ||
8328 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
8329 return I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK_HSW;
8331 return I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK;
8334 static void intel_get_pipe_timings(struct intel_crtc *crtc,
8335 struct intel_crtc_state *pipe_config)
8337 struct drm_device *dev = crtc->base.dev;
8338 struct drm_i915_private *dev_priv = to_i915(dev);
8339 enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
8342 tmp = I915_READ(HTOTAL(cpu_transcoder));
8343 pipe_config->base.adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1;
8344 pipe_config->base.adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1;
8346 if (!transcoder_is_dsi(cpu_transcoder)) {
8347 tmp = I915_READ(HBLANK(cpu_transcoder));
8348 pipe_config->base.adjusted_mode.crtc_hblank_start =
8350 pipe_config->base.adjusted_mode.crtc_hblank_end =
8351 ((tmp >> 16) & 0xffff) + 1;
8353 tmp = I915_READ(HSYNC(cpu_transcoder));
8354 pipe_config->base.adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1;
8355 pipe_config->base.adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1;
8357 tmp = I915_READ(VTOTAL(cpu_transcoder));
8358 pipe_config->base.adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1;
8359 pipe_config->base.adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1;
8361 if (!transcoder_is_dsi(cpu_transcoder)) {
8362 tmp = I915_READ(VBLANK(cpu_transcoder));
8363 pipe_config->base.adjusted_mode.crtc_vblank_start =
8365 pipe_config->base.adjusted_mode.crtc_vblank_end =
8366 ((tmp >> 16) & 0xffff) + 1;
8368 tmp = I915_READ(VSYNC(cpu_transcoder));
8369 pipe_config->base.adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1;
8370 pipe_config->base.adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1;
8372 if (intel_pipe_is_interlaced(pipe_config)) {
8373 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE;
8374 pipe_config->base.adjusted_mode.crtc_vtotal += 1;
8375 pipe_config->base.adjusted_mode.crtc_vblank_end += 1;
8379 static void intel_get_pipe_src_size(struct intel_crtc *crtc,
8380 struct intel_crtc_state *pipe_config)
8382 struct drm_device *dev = crtc->base.dev;
8383 struct drm_i915_private *dev_priv = to_i915(dev);
8386 tmp = I915_READ(PIPESRC(crtc->pipe));
8387 pipe_config->pipe_src_h = (tmp & 0xffff) + 1;
8388 pipe_config->pipe_src_w = ((tmp >> 16) & 0xffff) + 1;
8390 pipe_config->base.mode.vdisplay = pipe_config->pipe_src_h;
8391 pipe_config->base.mode.hdisplay = pipe_config->pipe_src_w;
8394 void intel_mode_from_pipe_config(struct drm_display_mode *mode,
8395 struct intel_crtc_state *pipe_config)
8397 mode->hdisplay = pipe_config->base.adjusted_mode.crtc_hdisplay;
8398 mode->htotal = pipe_config->base.adjusted_mode.crtc_htotal;
8399 mode->hsync_start = pipe_config->base.adjusted_mode.crtc_hsync_start;
8400 mode->hsync_end = pipe_config->base.adjusted_mode.crtc_hsync_end;
8402 mode->vdisplay = pipe_config->base.adjusted_mode.crtc_vdisplay;
8403 mode->vtotal = pipe_config->base.adjusted_mode.crtc_vtotal;
8404 mode->vsync_start = pipe_config->base.adjusted_mode.crtc_vsync_start;
8405 mode->vsync_end = pipe_config->base.adjusted_mode.crtc_vsync_end;
8407 mode->flags = pipe_config->base.adjusted_mode.flags;
8408 mode->type = DRM_MODE_TYPE_DRIVER;
8410 mode->clock = pipe_config->base.adjusted_mode.crtc_clock;
8412 mode->hsync = drm_mode_hsync(mode);
8413 mode->vrefresh = drm_mode_vrefresh(mode);
8414 drm_mode_set_name(mode);
8417 static void i9xx_set_pipeconf(const struct intel_crtc_state *crtc_state)
8419 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
8420 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
8425 /* we keep both pipes enabled on 830 */
8426 if (IS_I830(dev_priv))
8427 pipeconf |= I915_READ(PIPECONF(crtc->pipe)) & PIPECONF_ENABLE;
8429 if (crtc_state->double_wide)
8430 pipeconf |= PIPECONF_DOUBLE_WIDE;
8432 /* only g4x and later have fancy bpc/dither controls */
8433 if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) ||
8434 IS_CHERRYVIEW(dev_priv)) {
8435 /* Bspec claims that we can't use dithering for 30bpp pipes. */
8436 if (crtc_state->dither && crtc_state->pipe_bpp != 30)
8437 pipeconf |= PIPECONF_DITHER_EN |
8438 PIPECONF_DITHER_TYPE_SP;
8440 switch (crtc_state->pipe_bpp) {
8442 pipeconf |= PIPECONF_6BPC;
8445 pipeconf |= PIPECONF_8BPC;
8448 pipeconf |= PIPECONF_10BPC;
8451 /* Case prevented by intel_choose_pipe_bpp_dither. */
8456 if (crtc_state->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) {
8457 if (INTEL_GEN(dev_priv) < 4 ||
8458 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO))
8459 pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION;
8461 pipeconf |= PIPECONF_INTERLACE_W_SYNC_SHIFT;
8463 pipeconf |= PIPECONF_PROGRESSIVE;
8466 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
8467 crtc_state->limited_color_range)
8468 pipeconf |= PIPECONF_COLOR_RANGE_SELECT;
8470 pipeconf |= PIPECONF_GAMMA_MODE(crtc_state->gamma_mode);
8472 I915_WRITE(PIPECONF(crtc->pipe), pipeconf);
8473 POSTING_READ(PIPECONF(crtc->pipe));
8476 static int i8xx_crtc_compute_clock(struct intel_crtc *crtc,
8477 struct intel_crtc_state *crtc_state)
8479 struct drm_device *dev = crtc->base.dev;
8480 struct drm_i915_private *dev_priv = to_i915(dev);
8481 const struct intel_limit *limit;
8484 memset(&crtc_state->dpll_hw_state, 0,
8485 sizeof(crtc_state->dpll_hw_state));
8487 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
8488 if (intel_panel_use_ssc(dev_priv)) {
8489 refclk = dev_priv->vbt.lvds_ssc_freq;
8490 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
8493 limit = &intel_limits_i8xx_lvds;
8494 } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DVO)) {
8495 limit = &intel_limits_i8xx_dvo;
8497 limit = &intel_limits_i8xx_dac;
8500 if (!crtc_state->clock_set &&
8501 !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8502 refclk, NULL, &crtc_state->dpll)) {
8503 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8507 i8xx_compute_dpll(crtc, crtc_state, NULL);
8512 static int g4x_crtc_compute_clock(struct intel_crtc *crtc,
8513 struct intel_crtc_state *crtc_state)
8515 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
8516 const struct intel_limit *limit;
8519 memset(&crtc_state->dpll_hw_state, 0,
8520 sizeof(crtc_state->dpll_hw_state));
8522 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
8523 if (intel_panel_use_ssc(dev_priv)) {
8524 refclk = dev_priv->vbt.lvds_ssc_freq;
8525 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
8528 if (intel_is_dual_link_lvds(dev_priv))
8529 limit = &intel_limits_g4x_dual_channel_lvds;
8531 limit = &intel_limits_g4x_single_channel_lvds;
8532 } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI) ||
8533 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
8534 limit = &intel_limits_g4x_hdmi;
8535 } else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO)) {
8536 limit = &intel_limits_g4x_sdvo;
8538 /* The option is for other outputs */
8539 limit = &intel_limits_i9xx_sdvo;
8542 if (!crtc_state->clock_set &&
8543 !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8544 refclk, NULL, &crtc_state->dpll)) {
8545 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8549 i9xx_compute_dpll(crtc, crtc_state, NULL);
8554 static int pnv_crtc_compute_clock(struct intel_crtc *crtc,
8555 struct intel_crtc_state *crtc_state)
8557 struct drm_device *dev = crtc->base.dev;
8558 struct drm_i915_private *dev_priv = to_i915(dev);
8559 const struct intel_limit *limit;
8562 memset(&crtc_state->dpll_hw_state, 0,
8563 sizeof(crtc_state->dpll_hw_state));
8565 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
8566 if (intel_panel_use_ssc(dev_priv)) {
8567 refclk = dev_priv->vbt.lvds_ssc_freq;
8568 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
8571 limit = &intel_limits_pineview_lvds;
8573 limit = &intel_limits_pineview_sdvo;
8576 if (!crtc_state->clock_set &&
8577 !pnv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8578 refclk, NULL, &crtc_state->dpll)) {
8579 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8583 i9xx_compute_dpll(crtc, crtc_state, NULL);
8588 static int i9xx_crtc_compute_clock(struct intel_crtc *crtc,
8589 struct intel_crtc_state *crtc_state)
8591 struct drm_device *dev = crtc->base.dev;
8592 struct drm_i915_private *dev_priv = to_i915(dev);
8593 const struct intel_limit *limit;
8596 memset(&crtc_state->dpll_hw_state, 0,
8597 sizeof(crtc_state->dpll_hw_state));
8599 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
8600 if (intel_panel_use_ssc(dev_priv)) {
8601 refclk = dev_priv->vbt.lvds_ssc_freq;
8602 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk);
8605 limit = &intel_limits_i9xx_lvds;
8607 limit = &intel_limits_i9xx_sdvo;
8610 if (!crtc_state->clock_set &&
8611 !i9xx_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8612 refclk, NULL, &crtc_state->dpll)) {
8613 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8617 i9xx_compute_dpll(crtc, crtc_state, NULL);
8622 static int chv_crtc_compute_clock(struct intel_crtc *crtc,
8623 struct intel_crtc_state *crtc_state)
8625 int refclk = 100000;
8626 const struct intel_limit *limit = &intel_limits_chv;
8628 memset(&crtc_state->dpll_hw_state, 0,
8629 sizeof(crtc_state->dpll_hw_state));
8631 if (!crtc_state->clock_set &&
8632 !chv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8633 refclk, NULL, &crtc_state->dpll)) {
8634 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8638 chv_compute_dpll(crtc, crtc_state);
8643 static int vlv_crtc_compute_clock(struct intel_crtc *crtc,
8644 struct intel_crtc_state *crtc_state)
8646 int refclk = 100000;
8647 const struct intel_limit *limit = &intel_limits_vlv;
8649 memset(&crtc_state->dpll_hw_state, 0,
8650 sizeof(crtc_state->dpll_hw_state));
8652 if (!crtc_state->clock_set &&
8653 !vlv_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
8654 refclk, NULL, &crtc_state->dpll)) {
8655 DRM_ERROR("Couldn't find PLL settings for mode!\n");
8659 vlv_compute_dpll(crtc, crtc_state);
8664 static bool i9xx_has_pfit(struct drm_i915_private *dev_priv)
8666 if (IS_I830(dev_priv))
8669 return INTEL_GEN(dev_priv) >= 4 ||
8670 IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv);
8673 static void i9xx_get_pfit_config(struct intel_crtc *crtc,
8674 struct intel_crtc_state *pipe_config)
8676 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
8679 if (!i9xx_has_pfit(dev_priv))
8682 tmp = I915_READ(PFIT_CONTROL);
8683 if (!(tmp & PFIT_ENABLE))
8686 /* Check whether the pfit is attached to our pipe. */
8687 if (INTEL_GEN(dev_priv) < 4) {
8688 if (crtc->pipe != PIPE_B)
8691 if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT))
8695 pipe_config->gmch_pfit.control = tmp;
8696 pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS);
8699 static void vlv_crtc_clock_get(struct intel_crtc *crtc,
8700 struct intel_crtc_state *pipe_config)
8702 struct drm_device *dev = crtc->base.dev;
8703 struct drm_i915_private *dev_priv = to_i915(dev);
8704 enum pipe pipe = crtc->pipe;
8707 int refclk = 100000;
8709 /* In case of DSI, DPLL will not be used */
8710 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
8713 vlv_dpio_get(dev_priv);
8714 mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe));
8715 vlv_dpio_put(dev_priv);
8717 clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7;
8718 clock.m2 = mdiv & DPIO_M2DIV_MASK;
8719 clock.n = (mdiv >> DPIO_N_SHIFT) & 0xf;
8720 clock.p1 = (mdiv >> DPIO_P1_SHIFT) & 7;
8721 clock.p2 = (mdiv >> DPIO_P2_SHIFT) & 0x1f;
8723 pipe_config->port_clock = vlv_calc_dpll_params(refclk, &clock);
8727 i9xx_get_initial_plane_config(struct intel_crtc *crtc,
8728 struct intel_initial_plane_config *plane_config)
8730 struct drm_device *dev = crtc->base.dev;
8731 struct drm_i915_private *dev_priv = to_i915(dev);
8732 struct intel_plane *plane = to_intel_plane(crtc->base.primary);
8733 enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
8735 u32 val, base, offset;
8736 int fourcc, pixel_format;
8737 unsigned int aligned_height;
8738 struct drm_framebuffer *fb;
8739 struct intel_framebuffer *intel_fb;
8741 if (!plane->get_hw_state(plane, &pipe))
8744 WARN_ON(pipe != crtc->pipe);
8746 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
8748 DRM_DEBUG_KMS("failed to alloc fb\n");
8752 fb = &intel_fb->base;
8756 val = I915_READ(DSPCNTR(i9xx_plane));
8758 if (INTEL_GEN(dev_priv) >= 4) {
8759 if (val & DISPPLANE_TILED) {
8760 plane_config->tiling = I915_TILING_X;
8761 fb->modifier = I915_FORMAT_MOD_X_TILED;
8764 if (val & DISPPLANE_ROTATE_180)
8765 plane_config->rotation = DRM_MODE_ROTATE_180;
8768 if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B &&
8769 val & DISPPLANE_MIRROR)
8770 plane_config->rotation |= DRM_MODE_REFLECT_X;
8772 pixel_format = val & DISPPLANE_PIXFORMAT_MASK;
8773 fourcc = i9xx_format_to_fourcc(pixel_format);
8774 fb->format = drm_format_info(fourcc);
8776 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
8777 offset = I915_READ(DSPOFFSET(i9xx_plane));
8778 base = I915_READ(DSPSURF(i9xx_plane)) & 0xfffff000;
8779 } else if (INTEL_GEN(dev_priv) >= 4) {
8780 if (plane_config->tiling)
8781 offset = I915_READ(DSPTILEOFF(i9xx_plane));
8783 offset = I915_READ(DSPLINOFF(i9xx_plane));
8784 base = I915_READ(DSPSURF(i9xx_plane)) & 0xfffff000;
8786 base = I915_READ(DSPADDR(i9xx_plane));
8788 plane_config->base = base;
8790 val = I915_READ(PIPESRC(pipe));
8791 fb->width = ((val >> 16) & 0xfff) + 1;
8792 fb->height = ((val >> 0) & 0xfff) + 1;
8794 val = I915_READ(DSPSTRIDE(i9xx_plane));
8795 fb->pitches[0] = val & 0xffffffc0;
8797 aligned_height = intel_fb_align_height(fb, 0, fb->height);
8799 plane_config->size = fb->pitches[0] * aligned_height;
8801 DRM_DEBUG_KMS("%s/%s with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
8802 crtc->base.name, plane->base.name, fb->width, fb->height,
8803 fb->format->cpp[0] * 8, base, fb->pitches[0],
8804 plane_config->size);
8806 plane_config->fb = intel_fb;
8809 static void chv_crtc_clock_get(struct intel_crtc *crtc,
8810 struct intel_crtc_state *pipe_config)
8812 struct drm_device *dev = crtc->base.dev;
8813 struct drm_i915_private *dev_priv = to_i915(dev);
8814 enum pipe pipe = crtc->pipe;
8815 enum dpio_channel port = vlv_pipe_to_channel(pipe);
8817 u32 cmn_dw13, pll_dw0, pll_dw1, pll_dw2, pll_dw3;
8818 int refclk = 100000;
8820 /* In case of DSI, DPLL will not be used */
8821 if ((pipe_config->dpll_hw_state.dpll & DPLL_VCO_ENABLE) == 0)
8824 vlv_dpio_get(dev_priv);
8825 cmn_dw13 = vlv_dpio_read(dev_priv, pipe, CHV_CMN_DW13(port));
8826 pll_dw0 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW0(port));
8827 pll_dw1 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW1(port));
8828 pll_dw2 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW2(port));
8829 pll_dw3 = vlv_dpio_read(dev_priv, pipe, CHV_PLL_DW3(port));
8830 vlv_dpio_put(dev_priv);
8832 clock.m1 = (pll_dw1 & 0x7) == DPIO_CHV_M1_DIV_BY_2 ? 2 : 0;
8833 clock.m2 = (pll_dw0 & 0xff) << 22;
8834 if (pll_dw3 & DPIO_CHV_FRAC_DIV_EN)
8835 clock.m2 |= pll_dw2 & 0x3fffff;
8836 clock.n = (pll_dw1 >> DPIO_CHV_N_DIV_SHIFT) & 0xf;
8837 clock.p1 = (cmn_dw13 >> DPIO_CHV_P1_DIV_SHIFT) & 0x7;
8838 clock.p2 = (cmn_dw13 >> DPIO_CHV_P2_DIV_SHIFT) & 0x1f;
8840 pipe_config->port_clock = chv_calc_dpll_params(refclk, &clock);
8843 static enum intel_output_format
8844 bdw_get_pipemisc_output_format(struct intel_crtc *crtc)
8846 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
8849 tmp = I915_READ(PIPEMISC(crtc->pipe));
8851 if (tmp & PIPEMISC_YUV420_ENABLE) {
8852 /* We support 4:2:0 in full blend mode only */
8853 WARN_ON((tmp & PIPEMISC_YUV420_MODE_FULL_BLEND) == 0);
8855 return INTEL_OUTPUT_FORMAT_YCBCR420;
8856 } else if (tmp & PIPEMISC_OUTPUT_COLORSPACE_YUV) {
8857 return INTEL_OUTPUT_FORMAT_YCBCR444;
8859 return INTEL_OUTPUT_FORMAT_RGB;
8863 static void i9xx_get_pipe_color_config(struct intel_crtc_state *crtc_state)
8865 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
8866 struct intel_plane *plane = to_intel_plane(crtc->base.primary);
8867 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
8868 enum i9xx_plane_id i9xx_plane = plane->i9xx_plane;
8871 tmp = I915_READ(DSPCNTR(i9xx_plane));
8873 if (tmp & DISPPLANE_GAMMA_ENABLE)
8874 crtc_state->gamma_enable = true;
8876 if (!HAS_GMCH(dev_priv) &&
8877 tmp & DISPPLANE_PIPE_CSC_ENABLE)
8878 crtc_state->csc_enable = true;
8881 static bool i9xx_get_pipe_config(struct intel_crtc *crtc,
8882 struct intel_crtc_state *pipe_config)
8884 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
8885 enum intel_display_power_domain power_domain;
8886 intel_wakeref_t wakeref;
8890 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
8891 wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
8895 pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
8896 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
8897 pipe_config->shared_dpll = NULL;
8898 pipe_config->master_transcoder = INVALID_TRANSCODER;
8902 tmp = I915_READ(PIPECONF(crtc->pipe));
8903 if (!(tmp & PIPECONF_ENABLE))
8906 if (IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) ||
8907 IS_CHERRYVIEW(dev_priv)) {
8908 switch (tmp & PIPECONF_BPC_MASK) {
8910 pipe_config->pipe_bpp = 18;
8913 pipe_config->pipe_bpp = 24;
8915 case PIPECONF_10BPC:
8916 pipe_config->pipe_bpp = 30;
8923 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
8924 (tmp & PIPECONF_COLOR_RANGE_SELECT))
8925 pipe_config->limited_color_range = true;
8927 pipe_config->gamma_mode = (tmp & PIPECONF_GAMMA_MODE_MASK_I9XX) >>
8928 PIPECONF_GAMMA_MODE_SHIFT;
8930 if (IS_CHERRYVIEW(dev_priv))
8931 pipe_config->cgm_mode = I915_READ(CGM_PIPE_MODE(crtc->pipe));
8933 i9xx_get_pipe_color_config(pipe_config);
8934 intel_color_get_config(pipe_config);
8936 if (INTEL_GEN(dev_priv) < 4)
8937 pipe_config->double_wide = tmp & PIPECONF_DOUBLE_WIDE;
8939 intel_get_pipe_timings(crtc, pipe_config);
8940 intel_get_pipe_src_size(crtc, pipe_config);
8942 i9xx_get_pfit_config(crtc, pipe_config);
8944 if (INTEL_GEN(dev_priv) >= 4) {
8945 /* No way to read it out on pipes B and C */
8946 if (IS_CHERRYVIEW(dev_priv) && crtc->pipe != PIPE_A)
8947 tmp = dev_priv->chv_dpll_md[crtc->pipe];
8949 tmp = I915_READ(DPLL_MD(crtc->pipe));
8950 pipe_config->pixel_multiplier =
8951 ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK)
8952 >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1;
8953 pipe_config->dpll_hw_state.dpll_md = tmp;
8954 } else if (IS_I945G(dev_priv) || IS_I945GM(dev_priv) ||
8955 IS_G33(dev_priv) || IS_PINEVIEW(dev_priv)) {
8956 tmp = I915_READ(DPLL(crtc->pipe));
8957 pipe_config->pixel_multiplier =
8958 ((tmp & SDVO_MULTIPLIER_MASK)
8959 >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1;
8961 /* Note that on i915G/GM the pixel multiplier is in the sdvo
8962 * port and will be fixed up in the encoder->get_config
8964 pipe_config->pixel_multiplier = 1;
8966 pipe_config->dpll_hw_state.dpll = I915_READ(DPLL(crtc->pipe));
8967 if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv)) {
8968 pipe_config->dpll_hw_state.fp0 = I915_READ(FP0(crtc->pipe));
8969 pipe_config->dpll_hw_state.fp1 = I915_READ(FP1(crtc->pipe));
8971 /* Mask out read-only status bits. */
8972 pipe_config->dpll_hw_state.dpll &= ~(DPLL_LOCK_VLV |
8973 DPLL_PORTC_READY_MASK |
8974 DPLL_PORTB_READY_MASK);
8977 if (IS_CHERRYVIEW(dev_priv))
8978 chv_crtc_clock_get(crtc, pipe_config);
8979 else if (IS_VALLEYVIEW(dev_priv))
8980 vlv_crtc_clock_get(crtc, pipe_config);
8982 i9xx_crtc_clock_get(crtc, pipe_config);
8985 * Normally the dotclock is filled in by the encoder .get_config()
8986 * but in case the pipe is enabled w/o any ports we need a sane
8989 pipe_config->base.adjusted_mode.crtc_clock =
8990 pipe_config->port_clock / pipe_config->pixel_multiplier;
8995 intel_display_power_put(dev_priv, power_domain, wakeref);
9000 static void ironlake_init_pch_refclk(struct drm_i915_private *dev_priv)
9002 struct intel_encoder *encoder;
9005 bool has_lvds = false;
9006 bool has_cpu_edp = false;
9007 bool has_panel = false;
9008 bool has_ck505 = false;
9009 bool can_ssc = false;
9010 bool using_ssc_source = false;
9012 /* We need to take the global config into account */
9013 for_each_intel_encoder(&dev_priv->drm, encoder) {
9014 switch (encoder->type) {
9015 case INTEL_OUTPUT_LVDS:
9019 case INTEL_OUTPUT_EDP:
9021 if (encoder->port == PORT_A)
9029 if (HAS_PCH_IBX(dev_priv)) {
9030 has_ck505 = dev_priv->vbt.display_clock_mode;
9031 can_ssc = has_ck505;
9037 /* Check if any DPLLs are using the SSC source */
9038 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
9039 u32 temp = I915_READ(PCH_DPLL(i));
9041 if (!(temp & DPLL_VCO_ENABLE))
9044 if ((temp & PLL_REF_INPUT_MASK) ==
9045 PLLB_REF_INPUT_SPREADSPECTRUMIN) {
9046 using_ssc_source = true;
9051 DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d using_ssc_source %d\n",
9052 has_panel, has_lvds, has_ck505, using_ssc_source);
9054 /* Ironlake: try to setup display ref clock before DPLL
9055 * enabling. This is only under driver's control after
9056 * PCH B stepping, previous chipset stepping should be
9057 * ignoring this setting.
9059 val = I915_READ(PCH_DREF_CONTROL);
9061 /* As we must carefully and slowly disable/enable each source in turn,
9062 * compute the final state we want first and check if we need to
9063 * make any changes at all.
9066 final &= ~DREF_NONSPREAD_SOURCE_MASK;
9068 final |= DREF_NONSPREAD_CK505_ENABLE;
9070 final |= DREF_NONSPREAD_SOURCE_ENABLE;
9072 final &= ~DREF_SSC_SOURCE_MASK;
9073 final &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
9074 final &= ~DREF_SSC1_ENABLE;
9077 final |= DREF_SSC_SOURCE_ENABLE;
9079 if (intel_panel_use_ssc(dev_priv) && can_ssc)
9080 final |= DREF_SSC1_ENABLE;
9083 if (intel_panel_use_ssc(dev_priv) && can_ssc)
9084 final |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
9086 final |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
9088 final |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
9089 } else if (using_ssc_source) {
9090 final |= DREF_SSC_SOURCE_ENABLE;
9091 final |= DREF_SSC1_ENABLE;
9097 /* Always enable nonspread source */
9098 val &= ~DREF_NONSPREAD_SOURCE_MASK;
9101 val |= DREF_NONSPREAD_CK505_ENABLE;
9103 val |= DREF_NONSPREAD_SOURCE_ENABLE;
9106 val &= ~DREF_SSC_SOURCE_MASK;
9107 val |= DREF_SSC_SOURCE_ENABLE;
9109 /* SSC must be turned on before enabling the CPU output */
9110 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
9111 DRM_DEBUG_KMS("Using SSC on panel\n");
9112 val |= DREF_SSC1_ENABLE;
9114 val &= ~DREF_SSC1_ENABLE;
9116 /* Get SSC going before enabling the outputs */
9117 I915_WRITE(PCH_DREF_CONTROL, val);
9118 POSTING_READ(PCH_DREF_CONTROL);
9121 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
9123 /* Enable CPU source on CPU attached eDP */
9125 if (intel_panel_use_ssc(dev_priv) && can_ssc) {
9126 DRM_DEBUG_KMS("Using SSC on eDP\n");
9127 val |= DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD;
9129 val |= DREF_CPU_SOURCE_OUTPUT_NONSPREAD;
9131 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
9133 I915_WRITE(PCH_DREF_CONTROL, val);
9134 POSTING_READ(PCH_DREF_CONTROL);
9137 DRM_DEBUG_KMS("Disabling CPU source output\n");
9139 val &= ~DREF_CPU_SOURCE_OUTPUT_MASK;
9141 /* Turn off CPU output */
9142 val |= DREF_CPU_SOURCE_OUTPUT_DISABLE;
9144 I915_WRITE(PCH_DREF_CONTROL, val);
9145 POSTING_READ(PCH_DREF_CONTROL);
9148 if (!using_ssc_source) {
9149 DRM_DEBUG_KMS("Disabling SSC source\n");
9151 /* Turn off the SSC source */
9152 val &= ~DREF_SSC_SOURCE_MASK;
9153 val |= DREF_SSC_SOURCE_DISABLE;
9156 val &= ~DREF_SSC1_ENABLE;
9158 I915_WRITE(PCH_DREF_CONTROL, val);
9159 POSTING_READ(PCH_DREF_CONTROL);
9164 BUG_ON(val != final);
9167 static void lpt_reset_fdi_mphy(struct drm_i915_private *dev_priv)
9171 tmp = I915_READ(SOUTH_CHICKEN2);
9172 tmp |= FDI_MPHY_IOSFSB_RESET_CTL;
9173 I915_WRITE(SOUTH_CHICKEN2, tmp);
9175 if (wait_for_us(I915_READ(SOUTH_CHICKEN2) &
9176 FDI_MPHY_IOSFSB_RESET_STATUS, 100))
9177 DRM_ERROR("FDI mPHY reset assert timeout\n");
9179 tmp = I915_READ(SOUTH_CHICKEN2);
9180 tmp &= ~FDI_MPHY_IOSFSB_RESET_CTL;
9181 I915_WRITE(SOUTH_CHICKEN2, tmp);
9183 if (wait_for_us((I915_READ(SOUTH_CHICKEN2) &
9184 FDI_MPHY_IOSFSB_RESET_STATUS) == 0, 100))
9185 DRM_ERROR("FDI mPHY reset de-assert timeout\n");
9188 /* WaMPhyProgramming:hsw */
9189 static void lpt_program_fdi_mphy(struct drm_i915_private *dev_priv)
9193 tmp = intel_sbi_read(dev_priv, 0x8008, SBI_MPHY);
9194 tmp &= ~(0xFF << 24);
9195 tmp |= (0x12 << 24);
9196 intel_sbi_write(dev_priv, 0x8008, tmp, SBI_MPHY);
9198 tmp = intel_sbi_read(dev_priv, 0x2008, SBI_MPHY);
9200 intel_sbi_write(dev_priv, 0x2008, tmp, SBI_MPHY);
9202 tmp = intel_sbi_read(dev_priv, 0x2108, SBI_MPHY);
9204 intel_sbi_write(dev_priv, 0x2108, tmp, SBI_MPHY);
9206 tmp = intel_sbi_read(dev_priv, 0x206C, SBI_MPHY);
9207 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
9208 intel_sbi_write(dev_priv, 0x206C, tmp, SBI_MPHY);
9210 tmp = intel_sbi_read(dev_priv, 0x216C, SBI_MPHY);
9211 tmp |= (1 << 24) | (1 << 21) | (1 << 18);
9212 intel_sbi_write(dev_priv, 0x216C, tmp, SBI_MPHY);
9214 tmp = intel_sbi_read(dev_priv, 0x2080, SBI_MPHY);
9217 intel_sbi_write(dev_priv, 0x2080, tmp, SBI_MPHY);
9219 tmp = intel_sbi_read(dev_priv, 0x2180, SBI_MPHY);
9222 intel_sbi_write(dev_priv, 0x2180, tmp, SBI_MPHY);
9224 tmp = intel_sbi_read(dev_priv, 0x208C, SBI_MPHY);
9227 intel_sbi_write(dev_priv, 0x208C, tmp, SBI_MPHY);
9229 tmp = intel_sbi_read(dev_priv, 0x218C, SBI_MPHY);
9232 intel_sbi_write(dev_priv, 0x218C, tmp, SBI_MPHY);
9234 tmp = intel_sbi_read(dev_priv, 0x2098, SBI_MPHY);
9235 tmp &= ~(0xFF << 16);
9236 tmp |= (0x1C << 16);
9237 intel_sbi_write(dev_priv, 0x2098, tmp, SBI_MPHY);
9239 tmp = intel_sbi_read(dev_priv, 0x2198, SBI_MPHY);
9240 tmp &= ~(0xFF << 16);
9241 tmp |= (0x1C << 16);
9242 intel_sbi_write(dev_priv, 0x2198, tmp, SBI_MPHY);
9244 tmp = intel_sbi_read(dev_priv, 0x20C4, SBI_MPHY);
9246 intel_sbi_write(dev_priv, 0x20C4, tmp, SBI_MPHY);
9248 tmp = intel_sbi_read(dev_priv, 0x21C4, SBI_MPHY);
9250 intel_sbi_write(dev_priv, 0x21C4, tmp, SBI_MPHY);
9252 tmp = intel_sbi_read(dev_priv, 0x20EC, SBI_MPHY);
9253 tmp &= ~(0xF << 28);
9255 intel_sbi_write(dev_priv, 0x20EC, tmp, SBI_MPHY);
9257 tmp = intel_sbi_read(dev_priv, 0x21EC, SBI_MPHY);
9258 tmp &= ~(0xF << 28);
9260 intel_sbi_write(dev_priv, 0x21EC, tmp, SBI_MPHY);
9263 /* Implements 3 different sequences from BSpec chapter "Display iCLK
9264 * Programming" based on the parameters passed:
9265 * - Sequence to enable CLKOUT_DP
9266 * - Sequence to enable CLKOUT_DP without spread
9267 * - Sequence to enable CLKOUT_DP for FDI usage and configure PCH FDI I/O
9269 static void lpt_enable_clkout_dp(struct drm_i915_private *dev_priv,
9270 bool with_spread, bool with_fdi)
9274 if (WARN(with_fdi && !with_spread, "FDI requires downspread\n"))
9276 if (WARN(HAS_PCH_LPT_LP(dev_priv) &&
9277 with_fdi, "LP PCH doesn't have FDI\n"))
9280 mutex_lock(&dev_priv->sb_lock);
9282 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
9283 tmp &= ~SBI_SSCCTL_DISABLE;
9284 tmp |= SBI_SSCCTL_PATHALT;
9285 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
9290 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
9291 tmp &= ~SBI_SSCCTL_PATHALT;
9292 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
9295 lpt_reset_fdi_mphy(dev_priv);
9296 lpt_program_fdi_mphy(dev_priv);
9300 reg = HAS_PCH_LPT_LP(dev_priv) ? SBI_GEN0 : SBI_DBUFF0;
9301 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
9302 tmp |= SBI_GEN0_CFG_BUFFENABLE_DISABLE;
9303 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
9305 mutex_unlock(&dev_priv->sb_lock);
9308 /* Sequence to disable CLKOUT_DP */
9309 void lpt_disable_clkout_dp(struct drm_i915_private *dev_priv)
9313 mutex_lock(&dev_priv->sb_lock);
9315 reg = HAS_PCH_LPT_LP(dev_priv) ? SBI_GEN0 : SBI_DBUFF0;
9316 tmp = intel_sbi_read(dev_priv, reg, SBI_ICLK);
9317 tmp &= ~SBI_GEN0_CFG_BUFFENABLE_DISABLE;
9318 intel_sbi_write(dev_priv, reg, tmp, SBI_ICLK);
9320 tmp = intel_sbi_read(dev_priv, SBI_SSCCTL, SBI_ICLK);
9321 if (!(tmp & SBI_SSCCTL_DISABLE)) {
9322 if (!(tmp & SBI_SSCCTL_PATHALT)) {
9323 tmp |= SBI_SSCCTL_PATHALT;
9324 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
9327 tmp |= SBI_SSCCTL_DISABLE;
9328 intel_sbi_write(dev_priv, SBI_SSCCTL, tmp, SBI_ICLK);
9331 mutex_unlock(&dev_priv->sb_lock);
9334 #define BEND_IDX(steps) ((50 + (steps)) / 5)
9336 static const u16 sscdivintphase[] = {
9337 [BEND_IDX( 50)] = 0x3B23,
9338 [BEND_IDX( 45)] = 0x3B23,
9339 [BEND_IDX( 40)] = 0x3C23,
9340 [BEND_IDX( 35)] = 0x3C23,
9341 [BEND_IDX( 30)] = 0x3D23,
9342 [BEND_IDX( 25)] = 0x3D23,
9343 [BEND_IDX( 20)] = 0x3E23,
9344 [BEND_IDX( 15)] = 0x3E23,
9345 [BEND_IDX( 10)] = 0x3F23,
9346 [BEND_IDX( 5)] = 0x3F23,
9347 [BEND_IDX( 0)] = 0x0025,
9348 [BEND_IDX( -5)] = 0x0025,
9349 [BEND_IDX(-10)] = 0x0125,
9350 [BEND_IDX(-15)] = 0x0125,
9351 [BEND_IDX(-20)] = 0x0225,
9352 [BEND_IDX(-25)] = 0x0225,
9353 [BEND_IDX(-30)] = 0x0325,
9354 [BEND_IDX(-35)] = 0x0325,
9355 [BEND_IDX(-40)] = 0x0425,
9356 [BEND_IDX(-45)] = 0x0425,
9357 [BEND_IDX(-50)] = 0x0525,
9362 * steps -50 to 50 inclusive, in steps of 5
9363 * < 0 slow down the clock, > 0 speed up the clock, 0 == no bend (135MHz)
9364 * change in clock period = -(steps / 10) * 5.787 ps
9366 static void lpt_bend_clkout_dp(struct drm_i915_private *dev_priv, int steps)
9369 int idx = BEND_IDX(steps);
9371 if (WARN_ON(steps % 5 != 0))
9374 if (WARN_ON(idx >= ARRAY_SIZE(sscdivintphase)))
9377 mutex_lock(&dev_priv->sb_lock);
9379 if (steps % 10 != 0)
9383 intel_sbi_write(dev_priv, SBI_SSCDITHPHASE, tmp, SBI_ICLK);
9385 tmp = intel_sbi_read(dev_priv, SBI_SSCDIVINTPHASE, SBI_ICLK);
9387 tmp |= sscdivintphase[idx];
9388 intel_sbi_write(dev_priv, SBI_SSCDIVINTPHASE, tmp, SBI_ICLK);
9390 mutex_unlock(&dev_priv->sb_lock);
9395 static bool spll_uses_pch_ssc(struct drm_i915_private *dev_priv)
9397 u32 fuse_strap = I915_READ(FUSE_STRAP);
9398 u32 ctl = I915_READ(SPLL_CTL);
9400 if ((ctl & SPLL_PLL_ENABLE) == 0)
9403 if ((ctl & SPLL_REF_MASK) == SPLL_REF_MUXED_SSC &&
9404 (fuse_strap & HSW_CPU_SSC_ENABLE) == 0)
9407 if (IS_BROADWELL(dev_priv) &&
9408 (ctl & SPLL_REF_MASK) == SPLL_REF_PCH_SSC_BDW)
9414 static bool wrpll_uses_pch_ssc(struct drm_i915_private *dev_priv,
9415 enum intel_dpll_id id)
9417 u32 fuse_strap = I915_READ(FUSE_STRAP);
9418 u32 ctl = I915_READ(WRPLL_CTL(id));
9420 if ((ctl & WRPLL_PLL_ENABLE) == 0)
9423 if ((ctl & WRPLL_REF_MASK) == WRPLL_REF_PCH_SSC)
9426 if ((IS_BROADWELL(dev_priv) || IS_HSW_ULT(dev_priv)) &&
9427 (ctl & WRPLL_REF_MASK) == WRPLL_REF_MUXED_SSC_BDW &&
9428 (fuse_strap & HSW_CPU_SSC_ENABLE) == 0)
9434 static void lpt_init_pch_refclk(struct drm_i915_private *dev_priv)
9436 struct intel_encoder *encoder;
9437 bool has_fdi = false;
9439 for_each_intel_encoder(&dev_priv->drm, encoder) {
9440 switch (encoder->type) {
9441 case INTEL_OUTPUT_ANALOG:
9450 * The BIOS may have decided to use the PCH SSC
9451 * reference so we must not disable it until the
9452 * relevant PLLs have stopped relying on it. We'll
9453 * just leave the PCH SSC reference enabled in case
9454 * any active PLL is using it. It will get disabled
9455 * after runtime suspend if we don't have FDI.
9457 * TODO: Move the whole reference clock handling
9458 * to the modeset sequence proper so that we can
9459 * actually enable/disable/reconfigure these things
9460 * safely. To do that we need to introduce a real
9461 * clock hierarchy. That would also allow us to do
9462 * clock bending finally.
9464 dev_priv->pch_ssc_use = 0;
9466 if (spll_uses_pch_ssc(dev_priv)) {
9467 DRM_DEBUG_KMS("SPLL using PCH SSC\n");
9468 dev_priv->pch_ssc_use |= BIT(DPLL_ID_SPLL);
9471 if (wrpll_uses_pch_ssc(dev_priv, DPLL_ID_WRPLL1)) {
9472 DRM_DEBUG_KMS("WRPLL1 using PCH SSC\n");
9473 dev_priv->pch_ssc_use |= BIT(DPLL_ID_WRPLL1);
9476 if (wrpll_uses_pch_ssc(dev_priv, DPLL_ID_WRPLL2)) {
9477 DRM_DEBUG_KMS("WRPLL2 using PCH SSC\n");
9478 dev_priv->pch_ssc_use |= BIT(DPLL_ID_WRPLL2);
9481 if (dev_priv->pch_ssc_use)
9485 lpt_bend_clkout_dp(dev_priv, 0);
9486 lpt_enable_clkout_dp(dev_priv, true, true);
9488 lpt_disable_clkout_dp(dev_priv);
9493 * Initialize reference clocks when the driver loads
9495 void intel_init_pch_refclk(struct drm_i915_private *dev_priv)
9497 if (HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv))
9498 ironlake_init_pch_refclk(dev_priv);
9499 else if (HAS_PCH_LPT(dev_priv))
9500 lpt_init_pch_refclk(dev_priv);
9503 static void ironlake_set_pipeconf(const struct intel_crtc_state *crtc_state)
9505 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
9506 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
9507 enum pipe pipe = crtc->pipe;
9512 switch (crtc_state->pipe_bpp) {
9514 val |= PIPECONF_6BPC;
9517 val |= PIPECONF_8BPC;
9520 val |= PIPECONF_10BPC;
9523 val |= PIPECONF_12BPC;
9526 /* Case prevented by intel_choose_pipe_bpp_dither. */
9530 if (crtc_state->dither)
9531 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
9533 if (crtc_state->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
9534 val |= PIPECONF_INTERLACED_ILK;
9536 val |= PIPECONF_PROGRESSIVE;
9539 * This would end up with an odd purple hue over
9540 * the entire display. Make sure we don't do it.
9542 WARN_ON(crtc_state->limited_color_range &&
9543 crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB);
9545 if (crtc_state->limited_color_range)
9546 val |= PIPECONF_COLOR_RANGE_SELECT;
9548 if (crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB)
9549 val |= PIPECONF_OUTPUT_COLORSPACE_YUV709;
9551 val |= PIPECONF_GAMMA_MODE(crtc_state->gamma_mode);
9553 I915_WRITE(PIPECONF(pipe), val);
9554 POSTING_READ(PIPECONF(pipe));
9557 static void haswell_set_pipeconf(const struct intel_crtc_state *crtc_state)
9559 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
9560 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
9561 enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
9564 if (IS_HASWELL(dev_priv) && crtc_state->dither)
9565 val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP);
9567 if (crtc_state->base.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE)
9568 val |= PIPECONF_INTERLACED_ILK;
9570 val |= PIPECONF_PROGRESSIVE;
9572 if (IS_HASWELL(dev_priv) &&
9573 crtc_state->output_format != INTEL_OUTPUT_FORMAT_RGB)
9574 val |= PIPECONF_OUTPUT_COLORSPACE_YUV_HSW;
9576 I915_WRITE(PIPECONF(cpu_transcoder), val);
9577 POSTING_READ(PIPECONF(cpu_transcoder));
9580 static void bdw_set_pipemisc(const struct intel_crtc_state *crtc_state)
9582 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
9583 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
9586 switch (crtc_state->pipe_bpp) {
9588 val |= PIPEMISC_DITHER_6_BPC;
9591 val |= PIPEMISC_DITHER_8_BPC;
9594 val |= PIPEMISC_DITHER_10_BPC;
9597 val |= PIPEMISC_DITHER_12_BPC;
9600 MISSING_CASE(crtc_state->pipe_bpp);
9604 if (crtc_state->dither)
9605 val |= PIPEMISC_DITHER_ENABLE | PIPEMISC_DITHER_TYPE_SP;
9607 if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420 ||
9608 crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444)
9609 val |= PIPEMISC_OUTPUT_COLORSPACE_YUV;
9611 if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR420)
9612 val |= PIPEMISC_YUV420_ENABLE |
9613 PIPEMISC_YUV420_MODE_FULL_BLEND;
9615 if (INTEL_GEN(dev_priv) >= 11 &&
9616 (crtc_state->active_planes & ~(icl_hdr_plane_mask() |
9617 BIT(PLANE_CURSOR))) == 0)
9618 val |= PIPEMISC_HDR_MODE_PRECISION;
9620 I915_WRITE(PIPEMISC(crtc->pipe), val);
9623 int bdw_get_pipemisc_bpp(struct intel_crtc *crtc)
9625 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
9628 tmp = I915_READ(PIPEMISC(crtc->pipe));
9630 switch (tmp & PIPEMISC_DITHER_BPC_MASK) {
9631 case PIPEMISC_DITHER_6_BPC:
9633 case PIPEMISC_DITHER_8_BPC:
9635 case PIPEMISC_DITHER_10_BPC:
9637 case PIPEMISC_DITHER_12_BPC:
9645 int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp)
9648 * Account for spread spectrum to avoid
9649 * oversubscribing the link. Max center spread
9650 * is 2.5%; use 5% for safety's sake.
9652 u32 bps = target_clock * bpp * 21 / 20;
9653 return DIV_ROUND_UP(bps, link_bw * 8);
9656 static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor)
9658 return i9xx_dpll_compute_m(dpll) < factor * dpll->n;
9661 static void ironlake_compute_dpll(struct intel_crtc *crtc,
9662 struct intel_crtc_state *crtc_state,
9663 struct dpll *reduced_clock)
9665 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
9669 /* Enable autotuning of the PLL clock (if permissible) */
9671 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
9672 if ((intel_panel_use_ssc(dev_priv) &&
9673 dev_priv->vbt.lvds_ssc_freq == 100000) ||
9674 (HAS_PCH_IBX(dev_priv) &&
9675 intel_is_dual_link_lvds(dev_priv)))
9677 } else if (crtc_state->sdvo_tv_clock) {
9681 fp = i9xx_dpll_compute_fp(&crtc_state->dpll);
9683 if (ironlake_needs_fb_cb_tune(&crtc_state->dpll, factor))
9686 if (reduced_clock) {
9687 fp2 = i9xx_dpll_compute_fp(reduced_clock);
9689 if (reduced_clock->m < factor * reduced_clock->n)
9697 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS))
9698 dpll |= DPLLB_MODE_LVDS;
9700 dpll |= DPLLB_MODE_DAC_SERIAL;
9702 dpll |= (crtc_state->pixel_multiplier - 1)
9703 << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT;
9705 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_SDVO) ||
9706 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
9707 dpll |= DPLL_SDVO_HIGH_SPEED;
9709 if (intel_crtc_has_dp_encoder(crtc_state))
9710 dpll |= DPLL_SDVO_HIGH_SPEED;
9713 * The high speed IO clock is only really required for
9714 * SDVO/HDMI/DP, but we also enable it for CRT to make it
9715 * possible to share the DPLL between CRT and HDMI. Enabling
9716 * the clock needlessly does no real harm, except use up a
9717 * bit of power potentially.
9719 * We'll limit this to IVB with 3 pipes, since it has only two
9720 * DPLLs and so DPLL sharing is the only way to get three pipes
9721 * driving PCH ports at the same time. On SNB we could do this,
9722 * and potentially avoid enabling the second DPLL, but it's not
9723 * clear if it''s a win or loss power wise. No point in doing
9724 * this on ILK at all since it has a fixed DPLL<->pipe mapping.
9726 if (INTEL_NUM_PIPES(dev_priv) == 3 &&
9727 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG))
9728 dpll |= DPLL_SDVO_HIGH_SPEED;
9730 /* compute bitmask from p1 value */
9731 dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT;
9733 dpll |= (1 << (crtc_state->dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT;
9735 switch (crtc_state->dpll.p2) {
9737 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5;
9740 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_7;
9743 dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_10;
9746 dpll |= DPLLB_LVDS_P2_CLOCK_DIV_14;
9750 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS) &&
9751 intel_panel_use_ssc(dev_priv))
9752 dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN;
9754 dpll |= PLL_REF_INPUT_DREFCLK;
9756 dpll |= DPLL_VCO_ENABLE;
9758 crtc_state->dpll_hw_state.dpll = dpll;
9759 crtc_state->dpll_hw_state.fp0 = fp;
9760 crtc_state->dpll_hw_state.fp1 = fp2;
9763 static int ironlake_crtc_compute_clock(struct intel_crtc *crtc,
9764 struct intel_crtc_state *crtc_state)
9766 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
9767 struct intel_atomic_state *state =
9768 to_intel_atomic_state(crtc_state->base.state);
9769 const struct intel_limit *limit;
9770 int refclk = 120000;
9772 memset(&crtc_state->dpll_hw_state, 0,
9773 sizeof(crtc_state->dpll_hw_state));
9775 /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */
9776 if (!crtc_state->has_pch_encoder)
9779 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_LVDS)) {
9780 if (intel_panel_use_ssc(dev_priv)) {
9781 DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n",
9782 dev_priv->vbt.lvds_ssc_freq);
9783 refclk = dev_priv->vbt.lvds_ssc_freq;
9786 if (intel_is_dual_link_lvds(dev_priv)) {
9787 if (refclk == 100000)
9788 limit = &intel_limits_ironlake_dual_lvds_100m;
9790 limit = &intel_limits_ironlake_dual_lvds;
9792 if (refclk == 100000)
9793 limit = &intel_limits_ironlake_single_lvds_100m;
9795 limit = &intel_limits_ironlake_single_lvds;
9798 limit = &intel_limits_ironlake_dac;
9801 if (!crtc_state->clock_set &&
9802 !g4x_find_best_dpll(limit, crtc_state, crtc_state->port_clock,
9803 refclk, NULL, &crtc_state->dpll)) {
9804 DRM_ERROR("Couldn't find PLL settings for mode!\n");
9808 ironlake_compute_dpll(crtc, crtc_state, NULL);
9810 if (!intel_reserve_shared_dplls(state, crtc, NULL)) {
9811 DRM_DEBUG_KMS("failed to find PLL for pipe %c\n",
9812 pipe_name(crtc->pipe));
9819 static void intel_pch_transcoder_get_m_n(struct intel_crtc *crtc,
9820 struct intel_link_m_n *m_n)
9822 struct drm_device *dev = crtc->base.dev;
9823 struct drm_i915_private *dev_priv = to_i915(dev);
9824 enum pipe pipe = crtc->pipe;
9826 m_n->link_m = I915_READ(PCH_TRANS_LINK_M1(pipe));
9827 m_n->link_n = I915_READ(PCH_TRANS_LINK_N1(pipe));
9828 m_n->gmch_m = I915_READ(PCH_TRANS_DATA_M1(pipe))
9830 m_n->gmch_n = I915_READ(PCH_TRANS_DATA_N1(pipe));
9831 m_n->tu = ((I915_READ(PCH_TRANS_DATA_M1(pipe))
9832 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9835 static void intel_cpu_transcoder_get_m_n(struct intel_crtc *crtc,
9836 enum transcoder transcoder,
9837 struct intel_link_m_n *m_n,
9838 struct intel_link_m_n *m2_n2)
9840 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
9841 enum pipe pipe = crtc->pipe;
9843 if (INTEL_GEN(dev_priv) >= 5) {
9844 m_n->link_m = I915_READ(PIPE_LINK_M1(transcoder));
9845 m_n->link_n = I915_READ(PIPE_LINK_N1(transcoder));
9846 m_n->gmch_m = I915_READ(PIPE_DATA_M1(transcoder))
9848 m_n->gmch_n = I915_READ(PIPE_DATA_N1(transcoder));
9849 m_n->tu = ((I915_READ(PIPE_DATA_M1(transcoder))
9850 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9852 if (m2_n2 && transcoder_has_m2_n2(dev_priv, transcoder)) {
9853 m2_n2->link_m = I915_READ(PIPE_LINK_M2(transcoder));
9854 m2_n2->link_n = I915_READ(PIPE_LINK_N2(transcoder));
9855 m2_n2->gmch_m = I915_READ(PIPE_DATA_M2(transcoder))
9857 m2_n2->gmch_n = I915_READ(PIPE_DATA_N2(transcoder));
9858 m2_n2->tu = ((I915_READ(PIPE_DATA_M2(transcoder))
9859 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9862 m_n->link_m = I915_READ(PIPE_LINK_M_G4X(pipe));
9863 m_n->link_n = I915_READ(PIPE_LINK_N_G4X(pipe));
9864 m_n->gmch_m = I915_READ(PIPE_DATA_M_G4X(pipe))
9866 m_n->gmch_n = I915_READ(PIPE_DATA_N_G4X(pipe));
9867 m_n->tu = ((I915_READ(PIPE_DATA_M_G4X(pipe))
9868 & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1;
9872 void intel_dp_get_m_n(struct intel_crtc *crtc,
9873 struct intel_crtc_state *pipe_config)
9875 if (pipe_config->has_pch_encoder)
9876 intel_pch_transcoder_get_m_n(crtc, &pipe_config->dp_m_n);
9878 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
9879 &pipe_config->dp_m_n,
9880 &pipe_config->dp_m2_n2);
9883 static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc,
9884 struct intel_crtc_state *pipe_config)
9886 intel_cpu_transcoder_get_m_n(crtc, pipe_config->cpu_transcoder,
9887 &pipe_config->fdi_m_n, NULL);
9890 static void skylake_get_pfit_config(struct intel_crtc *crtc,
9891 struct intel_crtc_state *pipe_config)
9893 struct drm_device *dev = crtc->base.dev;
9894 struct drm_i915_private *dev_priv = to_i915(dev);
9895 struct intel_crtc_scaler_state *scaler_state = &pipe_config->scaler_state;
9900 /* find scaler attached to this pipe */
9901 for (i = 0; i < crtc->num_scalers; i++) {
9902 ps_ctrl = I915_READ(SKL_PS_CTRL(crtc->pipe, i));
9903 if (ps_ctrl & PS_SCALER_EN && !(ps_ctrl & PS_PLANE_SEL_MASK)) {
9905 pipe_config->pch_pfit.enabled = true;
9906 pipe_config->pch_pfit.pos = I915_READ(SKL_PS_WIN_POS(crtc->pipe, i));
9907 pipe_config->pch_pfit.size = I915_READ(SKL_PS_WIN_SZ(crtc->pipe, i));
9908 scaler_state->scalers[i].in_use = true;
9913 scaler_state->scaler_id = id;
9915 scaler_state->scaler_users |= (1 << SKL_CRTC_INDEX);
9917 scaler_state->scaler_users &= ~(1 << SKL_CRTC_INDEX);
9922 skylake_get_initial_plane_config(struct intel_crtc *crtc,
9923 struct intel_initial_plane_config *plane_config)
9925 struct drm_device *dev = crtc->base.dev;
9926 struct drm_i915_private *dev_priv = to_i915(dev);
9927 struct intel_plane *plane = to_intel_plane(crtc->base.primary);
9928 enum plane_id plane_id = plane->id;
9930 u32 val, base, offset, stride_mult, tiling, alpha;
9931 int fourcc, pixel_format;
9932 unsigned int aligned_height;
9933 struct drm_framebuffer *fb;
9934 struct intel_framebuffer *intel_fb;
9936 if (!plane->get_hw_state(plane, &pipe))
9939 WARN_ON(pipe != crtc->pipe);
9941 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
9943 DRM_DEBUG_KMS("failed to alloc fb\n");
9947 fb = &intel_fb->base;
9951 val = I915_READ(PLANE_CTL(pipe, plane_id));
9953 if (INTEL_GEN(dev_priv) >= 11)
9954 pixel_format = val & ICL_PLANE_CTL_FORMAT_MASK;
9956 pixel_format = val & PLANE_CTL_FORMAT_MASK;
9958 if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
9959 alpha = I915_READ(PLANE_COLOR_CTL(pipe, plane_id));
9960 alpha &= PLANE_COLOR_ALPHA_MASK;
9962 alpha = val & PLANE_CTL_ALPHA_MASK;
9965 fourcc = skl_format_to_fourcc(pixel_format,
9966 val & PLANE_CTL_ORDER_RGBX, alpha);
9967 fb->format = drm_format_info(fourcc);
9969 tiling = val & PLANE_CTL_TILED_MASK;
9971 case PLANE_CTL_TILED_LINEAR:
9972 fb->modifier = DRM_FORMAT_MOD_LINEAR;
9974 case PLANE_CTL_TILED_X:
9975 plane_config->tiling = I915_TILING_X;
9976 fb->modifier = I915_FORMAT_MOD_X_TILED;
9978 case PLANE_CTL_TILED_Y:
9979 plane_config->tiling = I915_TILING_Y;
9980 if (val & PLANE_CTL_RENDER_DECOMPRESSION_ENABLE)
9981 fb->modifier = I915_FORMAT_MOD_Y_TILED_CCS;
9983 fb->modifier = I915_FORMAT_MOD_Y_TILED;
9985 case PLANE_CTL_TILED_YF:
9986 if (val & PLANE_CTL_RENDER_DECOMPRESSION_ENABLE)
9987 fb->modifier = I915_FORMAT_MOD_Yf_TILED_CCS;
9989 fb->modifier = I915_FORMAT_MOD_Yf_TILED;
9992 MISSING_CASE(tiling);
9997 * DRM_MODE_ROTATE_ is counter clockwise to stay compatible with Xrandr
9998 * while i915 HW rotation is clockwise, thats why this swapping.
10000 switch (val & PLANE_CTL_ROTATE_MASK) {
10001 case PLANE_CTL_ROTATE_0:
10002 plane_config->rotation = DRM_MODE_ROTATE_0;
10004 case PLANE_CTL_ROTATE_90:
10005 plane_config->rotation = DRM_MODE_ROTATE_270;
10007 case PLANE_CTL_ROTATE_180:
10008 plane_config->rotation = DRM_MODE_ROTATE_180;
10010 case PLANE_CTL_ROTATE_270:
10011 plane_config->rotation = DRM_MODE_ROTATE_90;
10015 if (INTEL_GEN(dev_priv) >= 10 &&
10016 val & PLANE_CTL_FLIP_HORIZONTAL)
10017 plane_config->rotation |= DRM_MODE_REFLECT_X;
10019 base = I915_READ(PLANE_SURF(pipe, plane_id)) & 0xfffff000;
10020 plane_config->base = base;
10022 offset = I915_READ(PLANE_OFFSET(pipe, plane_id));
10024 val = I915_READ(PLANE_SIZE(pipe, plane_id));
10025 fb->height = ((val >> 16) & 0xffff) + 1;
10026 fb->width = ((val >> 0) & 0xffff) + 1;
10028 val = I915_READ(PLANE_STRIDE(pipe, plane_id));
10029 stride_mult = skl_plane_stride_mult(fb, 0, DRM_MODE_ROTATE_0);
10030 fb->pitches[0] = (val & 0x3ff) * stride_mult;
10032 aligned_height = intel_fb_align_height(fb, 0, fb->height);
10034 plane_config->size = fb->pitches[0] * aligned_height;
10036 DRM_DEBUG_KMS("%s/%s with fb: size=%dx%d@%d, offset=%x, pitch %d, size 0x%x\n",
10037 crtc->base.name, plane->base.name, fb->width, fb->height,
10038 fb->format->cpp[0] * 8, base, fb->pitches[0],
10039 plane_config->size);
10041 plane_config->fb = intel_fb;
10048 static void ironlake_get_pfit_config(struct intel_crtc *crtc,
10049 struct intel_crtc_state *pipe_config)
10051 struct drm_device *dev = crtc->base.dev;
10052 struct drm_i915_private *dev_priv = to_i915(dev);
10055 tmp = I915_READ(PF_CTL(crtc->pipe));
10057 if (tmp & PF_ENABLE) {
10058 pipe_config->pch_pfit.enabled = true;
10059 pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe));
10060 pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe));
10062 /* We currently do not free assignements of panel fitters on
10063 * ivb/hsw (since we don't use the higher upscaling modes which
10064 * differentiates them) so just WARN about this case for now. */
10065 if (IS_GEN(dev_priv, 7)) {
10066 WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) !=
10067 PF_PIPE_SEL_IVB(crtc->pipe));
10072 static bool ironlake_get_pipe_config(struct intel_crtc *crtc,
10073 struct intel_crtc_state *pipe_config)
10075 struct drm_device *dev = crtc->base.dev;
10076 struct drm_i915_private *dev_priv = to_i915(dev);
10077 enum intel_display_power_domain power_domain;
10078 intel_wakeref_t wakeref;
10082 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
10083 wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
10087 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
10088 pipe_config->shared_dpll = NULL;
10089 pipe_config->master_transcoder = INVALID_TRANSCODER;
10092 tmp = I915_READ(PIPECONF(crtc->pipe));
10093 if (!(tmp & PIPECONF_ENABLE))
10096 switch (tmp & PIPECONF_BPC_MASK) {
10097 case PIPECONF_6BPC:
10098 pipe_config->pipe_bpp = 18;
10100 case PIPECONF_8BPC:
10101 pipe_config->pipe_bpp = 24;
10103 case PIPECONF_10BPC:
10104 pipe_config->pipe_bpp = 30;
10106 case PIPECONF_12BPC:
10107 pipe_config->pipe_bpp = 36;
10113 if (tmp & PIPECONF_COLOR_RANGE_SELECT)
10114 pipe_config->limited_color_range = true;
10116 switch (tmp & PIPECONF_OUTPUT_COLORSPACE_MASK) {
10117 case PIPECONF_OUTPUT_COLORSPACE_YUV601:
10118 case PIPECONF_OUTPUT_COLORSPACE_YUV709:
10119 pipe_config->output_format = INTEL_OUTPUT_FORMAT_YCBCR444;
10122 pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
10126 pipe_config->gamma_mode = (tmp & PIPECONF_GAMMA_MODE_MASK_ILK) >>
10127 PIPECONF_GAMMA_MODE_SHIFT;
10129 pipe_config->csc_mode = I915_READ(PIPE_CSC_MODE(crtc->pipe));
10131 i9xx_get_pipe_color_config(pipe_config);
10132 intel_color_get_config(pipe_config);
10134 if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) {
10135 struct intel_shared_dpll *pll;
10136 enum intel_dpll_id pll_id;
10138 pipe_config->has_pch_encoder = true;
10140 tmp = I915_READ(FDI_RX_CTL(crtc->pipe));
10141 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
10142 FDI_DP_PORT_WIDTH_SHIFT) + 1;
10144 ironlake_get_fdi_m_n_config(crtc, pipe_config);
10146 if (HAS_PCH_IBX(dev_priv)) {
10148 * The pipe->pch transcoder and pch transcoder->pll
10149 * mapping is fixed.
10151 pll_id = (enum intel_dpll_id) crtc->pipe;
10153 tmp = I915_READ(PCH_DPLL_SEL);
10154 if (tmp & TRANS_DPLLB_SEL(crtc->pipe))
10155 pll_id = DPLL_ID_PCH_PLL_B;
10157 pll_id= DPLL_ID_PCH_PLL_A;
10160 pipe_config->shared_dpll =
10161 intel_get_shared_dpll_by_id(dev_priv, pll_id);
10162 pll = pipe_config->shared_dpll;
10164 WARN_ON(!pll->info->funcs->get_hw_state(dev_priv, pll,
10165 &pipe_config->dpll_hw_state));
10167 tmp = pipe_config->dpll_hw_state.dpll;
10168 pipe_config->pixel_multiplier =
10169 ((tmp & PLL_REF_SDVO_HDMI_MULTIPLIER_MASK)
10170 >> PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT) + 1;
10172 ironlake_pch_clock_get(crtc, pipe_config);
10174 pipe_config->pixel_multiplier = 1;
10177 intel_get_pipe_timings(crtc, pipe_config);
10178 intel_get_pipe_src_size(crtc, pipe_config);
10180 ironlake_get_pfit_config(crtc, pipe_config);
10185 intel_display_power_put(dev_priv, power_domain, wakeref);
10189 static int haswell_crtc_compute_clock(struct intel_crtc *crtc,
10190 struct intel_crtc_state *crtc_state)
10192 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
10193 struct intel_atomic_state *state =
10194 to_intel_atomic_state(crtc_state->base.state);
10196 if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) ||
10197 INTEL_GEN(dev_priv) >= 11) {
10198 struct intel_encoder *encoder =
10199 intel_get_crtc_new_encoder(state, crtc_state);
10201 if (!intel_reserve_shared_dplls(state, crtc, encoder)) {
10202 DRM_DEBUG_KMS("failed to find PLL for pipe %c\n",
10203 pipe_name(crtc->pipe));
10211 static void cannonlake_get_ddi_pll(struct drm_i915_private *dev_priv,
10213 struct intel_crtc_state *pipe_config)
10215 enum intel_dpll_id id;
10218 temp = I915_READ(DPCLKA_CFGCR0) & DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port);
10219 id = temp >> DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(port);
10221 if (WARN_ON(id < SKL_DPLL0 || id > SKL_DPLL2))
10224 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
10227 static void icelake_get_ddi_pll(struct drm_i915_private *dev_priv,
10229 struct intel_crtc_state *pipe_config)
10231 enum phy phy = intel_port_to_phy(dev_priv, port);
10232 enum icl_port_dpll_id port_dpll_id;
10233 enum intel_dpll_id id;
10236 if (intel_phy_is_combo(dev_priv, phy)) {
10237 temp = I915_READ(ICL_DPCLKA_CFGCR0) &
10238 ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(phy);
10239 id = temp >> ICL_DPCLKA_CFGCR0_DDI_CLK_SEL_SHIFT(phy);
10240 port_dpll_id = ICL_PORT_DPLL_DEFAULT;
10241 } else if (intel_phy_is_tc(dev_priv, phy)) {
10242 u32 clk_sel = I915_READ(DDI_CLK_SEL(port)) & DDI_CLK_SEL_MASK;
10244 if (clk_sel == DDI_CLK_SEL_MG) {
10245 id = icl_tc_port_to_pll_id(intel_port_to_tc(dev_priv,
10247 port_dpll_id = ICL_PORT_DPLL_MG_PHY;
10249 WARN_ON(clk_sel < DDI_CLK_SEL_TBT_162);
10250 id = DPLL_ID_ICL_TBTPLL;
10251 port_dpll_id = ICL_PORT_DPLL_DEFAULT;
10254 WARN(1, "Invalid port %x\n", port);
10258 pipe_config->icl_port_dplls[port_dpll_id].pll =
10259 intel_get_shared_dpll_by_id(dev_priv, id);
10261 icl_set_active_port_dpll(pipe_config, port_dpll_id);
10264 static void bxt_get_ddi_pll(struct drm_i915_private *dev_priv,
10266 struct intel_crtc_state *pipe_config)
10268 enum intel_dpll_id id;
10272 id = DPLL_ID_SKL_DPLL0;
10275 id = DPLL_ID_SKL_DPLL1;
10278 id = DPLL_ID_SKL_DPLL2;
10281 DRM_ERROR("Incorrect port type\n");
10285 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
10288 static void skylake_get_ddi_pll(struct drm_i915_private *dev_priv,
10290 struct intel_crtc_state *pipe_config)
10292 enum intel_dpll_id id;
10295 temp = I915_READ(DPLL_CTRL2) & DPLL_CTRL2_DDI_CLK_SEL_MASK(port);
10296 id = temp >> (port * 3 + 1);
10298 if (WARN_ON(id < SKL_DPLL0 || id > SKL_DPLL3))
10301 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
10304 static void haswell_get_ddi_pll(struct drm_i915_private *dev_priv,
10306 struct intel_crtc_state *pipe_config)
10308 enum intel_dpll_id id;
10309 u32 ddi_pll_sel = I915_READ(PORT_CLK_SEL(port));
10311 switch (ddi_pll_sel) {
10312 case PORT_CLK_SEL_WRPLL1:
10313 id = DPLL_ID_WRPLL1;
10315 case PORT_CLK_SEL_WRPLL2:
10316 id = DPLL_ID_WRPLL2;
10318 case PORT_CLK_SEL_SPLL:
10321 case PORT_CLK_SEL_LCPLL_810:
10322 id = DPLL_ID_LCPLL_810;
10324 case PORT_CLK_SEL_LCPLL_1350:
10325 id = DPLL_ID_LCPLL_1350;
10327 case PORT_CLK_SEL_LCPLL_2700:
10328 id = DPLL_ID_LCPLL_2700;
10331 MISSING_CASE(ddi_pll_sel);
10333 case PORT_CLK_SEL_NONE:
10337 pipe_config->shared_dpll = intel_get_shared_dpll_by_id(dev_priv, id);
10340 static bool hsw_get_transcoder_state(struct intel_crtc *crtc,
10341 struct intel_crtc_state *pipe_config,
10342 u64 *power_domain_mask,
10343 intel_wakeref_t *wakerefs)
10345 struct drm_device *dev = crtc->base.dev;
10346 struct drm_i915_private *dev_priv = to_i915(dev);
10347 enum intel_display_power_domain power_domain;
10348 unsigned long panel_transcoder_mask = 0;
10349 unsigned long enabled_panel_transcoders = 0;
10350 enum transcoder panel_transcoder;
10351 intel_wakeref_t wf;
10354 if (INTEL_GEN(dev_priv) >= 11)
10355 panel_transcoder_mask |=
10356 BIT(TRANSCODER_DSI_0) | BIT(TRANSCODER_DSI_1);
10358 if (HAS_TRANSCODER_EDP(dev_priv))
10359 panel_transcoder_mask |= BIT(TRANSCODER_EDP);
10362 * The pipe->transcoder mapping is fixed with the exception of the eDP
10363 * and DSI transcoders handled below.
10365 pipe_config->cpu_transcoder = (enum transcoder) crtc->pipe;
10368 * XXX: Do intel_display_power_get_if_enabled before reading this (for
10369 * consistency and less surprising code; it's in always on power).
10371 for_each_set_bit(panel_transcoder,
10372 &panel_transcoder_mask,
10373 ARRAY_SIZE(INTEL_INFO(dev_priv)->trans_offsets)) {
10374 bool force_thru = false;
10375 enum pipe trans_pipe;
10377 tmp = I915_READ(TRANS_DDI_FUNC_CTL(panel_transcoder));
10378 if (!(tmp & TRANS_DDI_FUNC_ENABLE))
10382 * Log all enabled ones, only use the first one.
10384 * FIXME: This won't work for two separate DSI displays.
10386 enabled_panel_transcoders |= BIT(panel_transcoder);
10387 if (enabled_panel_transcoders != BIT(panel_transcoder))
10390 switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
10392 WARN(1, "unknown pipe linked to transcoder %s\n",
10393 transcoder_name(panel_transcoder));
10395 case TRANS_DDI_EDP_INPUT_A_ONOFF:
10398 case TRANS_DDI_EDP_INPUT_A_ON:
10399 trans_pipe = PIPE_A;
10401 case TRANS_DDI_EDP_INPUT_B_ONOFF:
10402 trans_pipe = PIPE_B;
10404 case TRANS_DDI_EDP_INPUT_C_ONOFF:
10405 trans_pipe = PIPE_C;
10409 if (trans_pipe == crtc->pipe) {
10410 pipe_config->cpu_transcoder = panel_transcoder;
10411 pipe_config->pch_pfit.force_thru = force_thru;
10416 * Valid combos: none, eDP, DSI0, DSI1, DSI0+DSI1
10418 WARN_ON((enabled_panel_transcoders & BIT(TRANSCODER_EDP)) &&
10419 enabled_panel_transcoders != BIT(TRANSCODER_EDP));
10421 power_domain = POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder);
10422 WARN_ON(*power_domain_mask & BIT_ULL(power_domain));
10424 wf = intel_display_power_get_if_enabled(dev_priv, power_domain);
10428 wakerefs[power_domain] = wf;
10429 *power_domain_mask |= BIT_ULL(power_domain);
10431 tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
10433 return tmp & PIPECONF_ENABLE;
10436 static bool bxt_get_dsi_transcoder_state(struct intel_crtc *crtc,
10437 struct intel_crtc_state *pipe_config,
10438 u64 *power_domain_mask,
10439 intel_wakeref_t *wakerefs)
10441 struct drm_device *dev = crtc->base.dev;
10442 struct drm_i915_private *dev_priv = to_i915(dev);
10443 enum intel_display_power_domain power_domain;
10444 enum transcoder cpu_transcoder;
10445 intel_wakeref_t wf;
10449 for_each_port_masked(port, BIT(PORT_A) | BIT(PORT_C)) {
10450 if (port == PORT_A)
10451 cpu_transcoder = TRANSCODER_DSI_A;
10453 cpu_transcoder = TRANSCODER_DSI_C;
10455 power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
10456 WARN_ON(*power_domain_mask & BIT_ULL(power_domain));
10458 wf = intel_display_power_get_if_enabled(dev_priv, power_domain);
10462 wakerefs[power_domain] = wf;
10463 *power_domain_mask |= BIT_ULL(power_domain);
10466 * The PLL needs to be enabled with a valid divider
10467 * configuration, otherwise accessing DSI registers will hang
10468 * the machine. See BSpec North Display Engine
10469 * registers/MIPI[BXT]. We can break out here early, since we
10470 * need the same DSI PLL to be enabled for both DSI ports.
10472 if (!bxt_dsi_pll_is_enabled(dev_priv))
10475 /* XXX: this works for video mode only */
10476 tmp = I915_READ(BXT_MIPI_PORT_CTRL(port));
10477 if (!(tmp & DPI_ENABLE))
10480 tmp = I915_READ(MIPI_CTRL(port));
10481 if ((tmp & BXT_PIPE_SELECT_MASK) != BXT_PIPE_SELECT(crtc->pipe))
10484 pipe_config->cpu_transcoder = cpu_transcoder;
10488 return transcoder_is_dsi(pipe_config->cpu_transcoder);
10491 static void haswell_get_ddi_port_state(struct intel_crtc *crtc,
10492 struct intel_crtc_state *pipe_config)
10494 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
10495 struct intel_shared_dpll *pll;
10499 tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder));
10501 if (INTEL_GEN(dev_priv) >= 12)
10502 port = TGL_TRANS_DDI_FUNC_CTL_VAL_TO_PORT(tmp);
10504 port = TRANS_DDI_FUNC_CTL_VAL_TO_PORT(tmp);
10506 if (INTEL_GEN(dev_priv) >= 11)
10507 icelake_get_ddi_pll(dev_priv, port, pipe_config);
10508 else if (IS_CANNONLAKE(dev_priv))
10509 cannonlake_get_ddi_pll(dev_priv, port, pipe_config);
10510 else if (IS_GEN9_BC(dev_priv))
10511 skylake_get_ddi_pll(dev_priv, port, pipe_config);
10512 else if (IS_GEN9_LP(dev_priv))
10513 bxt_get_ddi_pll(dev_priv, port, pipe_config);
10515 haswell_get_ddi_pll(dev_priv, port, pipe_config);
10517 pll = pipe_config->shared_dpll;
10519 WARN_ON(!pll->info->funcs->get_hw_state(dev_priv, pll,
10520 &pipe_config->dpll_hw_state));
10524 * Haswell has only FDI/PCH transcoder A. It is which is connected to
10525 * DDI E. So just check whether this pipe is wired to DDI E and whether
10526 * the PCH transcoder is on.
10528 if (INTEL_GEN(dev_priv) < 9 &&
10529 (port == PORT_E) && I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) {
10530 pipe_config->has_pch_encoder = true;
10532 tmp = I915_READ(FDI_RX_CTL(PIPE_A));
10533 pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >>
10534 FDI_DP_PORT_WIDTH_SHIFT) + 1;
10536 ironlake_get_fdi_m_n_config(crtc, pipe_config);
10540 static enum transcoder transcoder_master_readout(struct drm_i915_private *dev_priv,
10541 enum transcoder cpu_transcoder)
10543 u32 trans_port_sync, master_select;
10545 trans_port_sync = I915_READ(TRANS_DDI_FUNC_CTL2(cpu_transcoder));
10547 if ((trans_port_sync & PORT_SYNC_MODE_ENABLE) == 0)
10548 return INVALID_TRANSCODER;
10550 master_select = trans_port_sync &
10551 PORT_SYNC_MODE_MASTER_SELECT_MASK;
10552 if (master_select == 0)
10553 return TRANSCODER_EDP;
10555 return master_select - 1;
10558 static void icelake_get_trans_port_sync_config(struct intel_crtc_state *crtc_state)
10560 struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
10562 enum transcoder cpu_transcoder;
10564 crtc_state->master_transcoder = transcoder_master_readout(dev_priv,
10565 crtc_state->cpu_transcoder);
10567 transcoders = BIT(TRANSCODER_A) |
10568 BIT(TRANSCODER_B) |
10569 BIT(TRANSCODER_C) |
10571 for_each_cpu_transcoder_masked(dev_priv, cpu_transcoder, transcoders) {
10572 enum intel_display_power_domain power_domain;
10573 intel_wakeref_t trans_wakeref;
10575 power_domain = POWER_DOMAIN_TRANSCODER(cpu_transcoder);
10576 trans_wakeref = intel_display_power_get_if_enabled(dev_priv,
10579 if (!trans_wakeref)
10582 if (transcoder_master_readout(dev_priv, cpu_transcoder) ==
10583 crtc_state->cpu_transcoder)
10584 crtc_state->sync_mode_slaves_mask |= BIT(cpu_transcoder);
10586 intel_display_power_put(dev_priv, power_domain, trans_wakeref);
10589 WARN_ON(crtc_state->master_transcoder != INVALID_TRANSCODER &&
10590 crtc_state->sync_mode_slaves_mask);
10593 static bool haswell_get_pipe_config(struct intel_crtc *crtc,
10594 struct intel_crtc_state *pipe_config)
10596 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
10597 intel_wakeref_t wakerefs[POWER_DOMAIN_NUM], wf;
10598 enum intel_display_power_domain power_domain;
10599 u64 power_domain_mask;
10602 intel_crtc_init_scalers(crtc, pipe_config);
10604 pipe_config->master_transcoder = INVALID_TRANSCODER;
10606 power_domain = POWER_DOMAIN_PIPE(crtc->pipe);
10607 wf = intel_display_power_get_if_enabled(dev_priv, power_domain);
10611 wakerefs[power_domain] = wf;
10612 power_domain_mask = BIT_ULL(power_domain);
10614 pipe_config->shared_dpll = NULL;
10616 active = hsw_get_transcoder_state(crtc, pipe_config,
10617 &power_domain_mask, wakerefs);
10619 if (IS_GEN9_LP(dev_priv) &&
10620 bxt_get_dsi_transcoder_state(crtc, pipe_config,
10621 &power_domain_mask, wakerefs)) {
10629 if (!transcoder_is_dsi(pipe_config->cpu_transcoder) ||
10630 INTEL_GEN(dev_priv) >= 11) {
10631 haswell_get_ddi_port_state(crtc, pipe_config);
10632 intel_get_pipe_timings(crtc, pipe_config);
10635 intel_get_pipe_src_size(crtc, pipe_config);
10637 if (IS_HASWELL(dev_priv)) {
10638 u32 tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder));
10640 if (tmp & PIPECONF_OUTPUT_COLORSPACE_YUV_HSW)
10641 pipe_config->output_format = INTEL_OUTPUT_FORMAT_YCBCR444;
10643 pipe_config->output_format = INTEL_OUTPUT_FORMAT_RGB;
10645 pipe_config->output_format =
10646 bdw_get_pipemisc_output_format(crtc);
10649 * Currently there is no interface defined to
10650 * check user preference between RGB/YCBCR444
10651 * or YCBCR420. So the only possible case for
10652 * YCBCR444 usage is driving YCBCR420 output
10653 * with LSPCON, when pipe is configured for
10654 * YCBCR444 output and LSPCON takes care of
10657 pipe_config->lspcon_downsampling =
10658 pipe_config->output_format == INTEL_OUTPUT_FORMAT_YCBCR444;
10661 pipe_config->gamma_mode = I915_READ(GAMMA_MODE(crtc->pipe));
10663 pipe_config->csc_mode = I915_READ(PIPE_CSC_MODE(crtc->pipe));
10665 if (INTEL_GEN(dev_priv) >= 9) {
10666 u32 tmp = I915_READ(SKL_BOTTOM_COLOR(crtc->pipe));
10668 if (tmp & SKL_BOTTOM_COLOR_GAMMA_ENABLE)
10669 pipe_config->gamma_enable = true;
10671 if (tmp & SKL_BOTTOM_COLOR_CSC_ENABLE)
10672 pipe_config->csc_enable = true;
10674 i9xx_get_pipe_color_config(pipe_config);
10677 intel_color_get_config(pipe_config);
10679 power_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe);
10680 WARN_ON(power_domain_mask & BIT_ULL(power_domain));
10682 wf = intel_display_power_get_if_enabled(dev_priv, power_domain);
10684 wakerefs[power_domain] = wf;
10685 power_domain_mask |= BIT_ULL(power_domain);
10687 if (INTEL_GEN(dev_priv) >= 9)
10688 skylake_get_pfit_config(crtc, pipe_config);
10690 ironlake_get_pfit_config(crtc, pipe_config);
10693 if (hsw_crtc_supports_ips(crtc)) {
10694 if (IS_HASWELL(dev_priv))
10695 pipe_config->ips_enabled = I915_READ(IPS_CTL) & IPS_ENABLE;
10698 * We cannot readout IPS state on broadwell, set to
10699 * true so we can set it to a defined state on first
10702 pipe_config->ips_enabled = true;
10706 if (pipe_config->cpu_transcoder != TRANSCODER_EDP &&
10707 !transcoder_is_dsi(pipe_config->cpu_transcoder)) {
10708 pipe_config->pixel_multiplier =
10709 I915_READ(PIPE_MULT(pipe_config->cpu_transcoder)) + 1;
10711 pipe_config->pixel_multiplier = 1;
10714 if (INTEL_GEN(dev_priv) >= 11 &&
10715 !transcoder_is_dsi(pipe_config->cpu_transcoder))
10716 icelake_get_trans_port_sync_config(pipe_config);
10719 for_each_power_domain(power_domain, power_domain_mask)
10720 intel_display_power_put(dev_priv,
10721 power_domain, wakerefs[power_domain]);
10726 static u32 intel_cursor_base(const struct intel_plane_state *plane_state)
10728 struct drm_i915_private *dev_priv =
10729 to_i915(plane_state->base.plane->dev);
10730 const struct drm_framebuffer *fb = plane_state->base.fb;
10731 const struct drm_i915_gem_object *obj = intel_fb_obj(fb);
10734 if (INTEL_INFO(dev_priv)->display.cursor_needs_physical)
10735 base = obj->phys_handle->busaddr;
10737 base = intel_plane_ggtt_offset(plane_state);
10739 return base + plane_state->color_plane[0].offset;
10742 static u32 intel_cursor_position(const struct intel_plane_state *plane_state)
10744 int x = plane_state->base.dst.x1;
10745 int y = plane_state->base.dst.y1;
10749 pos |= CURSOR_POS_SIGN << CURSOR_X_SHIFT;
10752 pos |= x << CURSOR_X_SHIFT;
10755 pos |= CURSOR_POS_SIGN << CURSOR_Y_SHIFT;
10758 pos |= y << CURSOR_Y_SHIFT;
10763 static bool intel_cursor_size_ok(const struct intel_plane_state *plane_state)
10765 const struct drm_mode_config *config =
10766 &plane_state->base.plane->dev->mode_config;
10767 int width = drm_rect_width(&plane_state->base.dst);
10768 int height = drm_rect_height(&plane_state->base.dst);
10770 return width > 0 && width <= config->cursor_width &&
10771 height > 0 && height <= config->cursor_height;
10774 static int intel_cursor_check_surface(struct intel_plane_state *plane_state)
10776 struct drm_i915_private *dev_priv =
10777 to_i915(plane_state->base.plane->dev);
10778 unsigned int rotation = plane_state->base.rotation;
10783 ret = intel_plane_compute_gtt(plane_state);
10787 if (!plane_state->base.visible)
10790 src_x = plane_state->base.src.x1 >> 16;
10791 src_y = plane_state->base.src.y1 >> 16;
10793 intel_add_fb_offsets(&src_x, &src_y, plane_state, 0);
10794 offset = intel_plane_compute_aligned_offset(&src_x, &src_y,
10797 if (src_x != 0 || src_y != 0) {
10798 DRM_DEBUG_KMS("Arbitrary cursor panning not supported\n");
10803 * Put the final coordinates back so that the src
10804 * coordinate checks will see the right values.
10806 drm_rect_translate_to(&plane_state->base.src,
10807 src_x << 16, src_y << 16);
10809 /* ILK+ do this automagically in hardware */
10810 if (HAS_GMCH(dev_priv) && rotation & DRM_MODE_ROTATE_180) {
10811 const struct drm_framebuffer *fb = plane_state->base.fb;
10812 int src_w = drm_rect_width(&plane_state->base.src) >> 16;
10813 int src_h = drm_rect_height(&plane_state->base.src) >> 16;
10815 offset += (src_h * src_w - 1) * fb->format->cpp[0];
10818 plane_state->color_plane[0].offset = offset;
10819 plane_state->color_plane[0].x = src_x;
10820 plane_state->color_plane[0].y = src_y;
10825 static int intel_check_cursor(struct intel_crtc_state *crtc_state,
10826 struct intel_plane_state *plane_state)
10828 const struct drm_framebuffer *fb = plane_state->base.fb;
10831 if (fb && fb->modifier != DRM_FORMAT_MOD_LINEAR) {
10832 DRM_DEBUG_KMS("cursor cannot be tiled\n");
10836 ret = drm_atomic_helper_check_plane_state(&plane_state->base,
10838 DRM_PLANE_HELPER_NO_SCALING,
10839 DRM_PLANE_HELPER_NO_SCALING,
10844 /* Use the unclipped src/dst rectangles, which we program to hw */
10845 plane_state->base.src = drm_plane_state_src(&plane_state->base);
10846 plane_state->base.dst = drm_plane_state_dest(&plane_state->base);
10848 ret = intel_cursor_check_surface(plane_state);
10852 if (!plane_state->base.visible)
10855 ret = intel_plane_check_src_coordinates(plane_state);
10862 static unsigned int
10863 i845_cursor_max_stride(struct intel_plane *plane,
10864 u32 pixel_format, u64 modifier,
10865 unsigned int rotation)
10870 static u32 i845_cursor_ctl_crtc(const struct intel_crtc_state *crtc_state)
10874 if (crtc_state->gamma_enable)
10875 cntl |= CURSOR_GAMMA_ENABLE;
10880 static u32 i845_cursor_ctl(const struct intel_crtc_state *crtc_state,
10881 const struct intel_plane_state *plane_state)
10883 return CURSOR_ENABLE |
10884 CURSOR_FORMAT_ARGB |
10885 CURSOR_STRIDE(plane_state->color_plane[0].stride);
10888 static bool i845_cursor_size_ok(const struct intel_plane_state *plane_state)
10890 int width = drm_rect_width(&plane_state->base.dst);
10893 * 845g/865g are only limited by the width of their cursors,
10894 * the height is arbitrary up to the precision of the register.
10896 return intel_cursor_size_ok(plane_state) && IS_ALIGNED(width, 64);
10899 static int i845_check_cursor(struct intel_crtc_state *crtc_state,
10900 struct intel_plane_state *plane_state)
10902 const struct drm_framebuffer *fb = plane_state->base.fb;
10905 ret = intel_check_cursor(crtc_state, plane_state);
10909 /* if we want to turn off the cursor ignore width and height */
10913 /* Check for which cursor types we support */
10914 if (!i845_cursor_size_ok(plane_state)) {
10915 DRM_DEBUG("Cursor dimension %dx%d not supported\n",
10916 drm_rect_width(&plane_state->base.dst),
10917 drm_rect_height(&plane_state->base.dst));
10921 WARN_ON(plane_state->base.visible &&
10922 plane_state->color_plane[0].stride != fb->pitches[0]);
10924 switch (fb->pitches[0]) {
10931 DRM_DEBUG_KMS("Invalid cursor stride (%u)\n",
10936 plane_state->ctl = i845_cursor_ctl(crtc_state, plane_state);
10941 static void i845_update_cursor(struct intel_plane *plane,
10942 const struct intel_crtc_state *crtc_state,
10943 const struct intel_plane_state *plane_state)
10945 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
10946 u32 cntl = 0, base = 0, pos = 0, size = 0;
10947 unsigned long irqflags;
10949 if (plane_state && plane_state->base.visible) {
10950 unsigned int width = drm_rect_width(&plane_state->base.dst);
10951 unsigned int height = drm_rect_height(&plane_state->base.dst);
10953 cntl = plane_state->ctl |
10954 i845_cursor_ctl_crtc(crtc_state);
10956 size = (height << 12) | width;
10958 base = intel_cursor_base(plane_state);
10959 pos = intel_cursor_position(plane_state);
10962 spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
10964 /* On these chipsets we can only modify the base/size/stride
10965 * whilst the cursor is disabled.
10967 if (plane->cursor.base != base ||
10968 plane->cursor.size != size ||
10969 plane->cursor.cntl != cntl) {
10970 I915_WRITE_FW(CURCNTR(PIPE_A), 0);
10971 I915_WRITE_FW(CURBASE(PIPE_A), base);
10972 I915_WRITE_FW(CURSIZE, size);
10973 I915_WRITE_FW(CURPOS(PIPE_A), pos);
10974 I915_WRITE_FW(CURCNTR(PIPE_A), cntl);
10976 plane->cursor.base = base;
10977 plane->cursor.size = size;
10978 plane->cursor.cntl = cntl;
10980 I915_WRITE_FW(CURPOS(PIPE_A), pos);
10983 spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
10986 static void i845_disable_cursor(struct intel_plane *plane,
10987 const struct intel_crtc_state *crtc_state)
10989 i845_update_cursor(plane, crtc_state, NULL);
10992 static bool i845_cursor_get_hw_state(struct intel_plane *plane,
10995 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
10996 enum intel_display_power_domain power_domain;
10997 intel_wakeref_t wakeref;
11000 power_domain = POWER_DOMAIN_PIPE(PIPE_A);
11001 wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
11005 ret = I915_READ(CURCNTR(PIPE_A)) & CURSOR_ENABLE;
11009 intel_display_power_put(dev_priv, power_domain, wakeref);
11014 static unsigned int
11015 i9xx_cursor_max_stride(struct intel_plane *plane,
11016 u32 pixel_format, u64 modifier,
11017 unsigned int rotation)
11019 return plane->base.dev->mode_config.cursor_width * 4;
11022 static u32 i9xx_cursor_ctl_crtc(const struct intel_crtc_state *crtc_state)
11024 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
11025 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
11028 if (INTEL_GEN(dev_priv) >= 11)
11031 if (crtc_state->gamma_enable)
11032 cntl = MCURSOR_GAMMA_ENABLE;
11034 if (crtc_state->csc_enable)
11035 cntl |= MCURSOR_PIPE_CSC_ENABLE;
11037 if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
11038 cntl |= MCURSOR_PIPE_SELECT(crtc->pipe);
11043 static u32 i9xx_cursor_ctl(const struct intel_crtc_state *crtc_state,
11044 const struct intel_plane_state *plane_state)
11046 struct drm_i915_private *dev_priv =
11047 to_i915(plane_state->base.plane->dev);
11050 if (IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv))
11051 cntl |= MCURSOR_TRICKLE_FEED_DISABLE;
11053 switch (drm_rect_width(&plane_state->base.dst)) {
11055 cntl |= MCURSOR_MODE_64_ARGB_AX;
11058 cntl |= MCURSOR_MODE_128_ARGB_AX;
11061 cntl |= MCURSOR_MODE_256_ARGB_AX;
11064 MISSING_CASE(drm_rect_width(&plane_state->base.dst));
11068 if (plane_state->base.rotation & DRM_MODE_ROTATE_180)
11069 cntl |= MCURSOR_ROTATE_180;
11074 static bool i9xx_cursor_size_ok(const struct intel_plane_state *plane_state)
11076 struct drm_i915_private *dev_priv =
11077 to_i915(plane_state->base.plane->dev);
11078 int width = drm_rect_width(&plane_state->base.dst);
11079 int height = drm_rect_height(&plane_state->base.dst);
11081 if (!intel_cursor_size_ok(plane_state))
11084 /* Cursor width is limited to a few power-of-two sizes */
11095 * IVB+ have CUR_FBC_CTL which allows an arbitrary cursor
11096 * height from 8 lines up to the cursor width, when the
11097 * cursor is not rotated. Everything else requires square
11100 if (HAS_CUR_FBC(dev_priv) &&
11101 plane_state->base.rotation & DRM_MODE_ROTATE_0) {
11102 if (height < 8 || height > width)
11105 if (height != width)
11112 static int i9xx_check_cursor(struct intel_crtc_state *crtc_state,
11113 struct intel_plane_state *plane_state)
11115 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
11116 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
11117 const struct drm_framebuffer *fb = plane_state->base.fb;
11118 enum pipe pipe = plane->pipe;
11121 ret = intel_check_cursor(crtc_state, plane_state);
11125 /* if we want to turn off the cursor ignore width and height */
11129 /* Check for which cursor types we support */
11130 if (!i9xx_cursor_size_ok(plane_state)) {
11131 DRM_DEBUG("Cursor dimension %dx%d not supported\n",
11132 drm_rect_width(&plane_state->base.dst),
11133 drm_rect_height(&plane_state->base.dst));
11137 WARN_ON(plane_state->base.visible &&
11138 plane_state->color_plane[0].stride != fb->pitches[0]);
11140 if (fb->pitches[0] !=
11141 drm_rect_width(&plane_state->base.dst) * fb->format->cpp[0]) {
11142 DRM_DEBUG_KMS("Invalid cursor stride (%u) (cursor width %d)\n",
11144 drm_rect_width(&plane_state->base.dst));
11149 * There's something wrong with the cursor on CHV pipe C.
11150 * If it straddles the left edge of the screen then
11151 * moving it away from the edge or disabling it often
11152 * results in a pipe underrun, and often that can lead to
11153 * dead pipe (constant underrun reported, and it scans
11154 * out just a solid color). To recover from that, the
11155 * display power well must be turned off and on again.
11156 * Refuse the put the cursor into that compromised position.
11158 if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_C &&
11159 plane_state->base.visible && plane_state->base.dst.x1 < 0) {
11160 DRM_DEBUG_KMS("CHV cursor C not allowed to straddle the left screen edge\n");
11164 plane_state->ctl = i9xx_cursor_ctl(crtc_state, plane_state);
11169 static void i9xx_update_cursor(struct intel_plane *plane,
11170 const struct intel_crtc_state *crtc_state,
11171 const struct intel_plane_state *plane_state)
11173 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
11174 enum pipe pipe = plane->pipe;
11175 u32 cntl = 0, base = 0, pos = 0, fbc_ctl = 0;
11176 unsigned long irqflags;
11178 if (plane_state && plane_state->base.visible) {
11179 unsigned width = drm_rect_width(&plane_state->base.dst);
11180 unsigned height = drm_rect_height(&plane_state->base.dst);
11182 cntl = plane_state->ctl |
11183 i9xx_cursor_ctl_crtc(crtc_state);
11185 if (width != height)
11186 fbc_ctl = CUR_FBC_CTL_EN | (height - 1);
11188 base = intel_cursor_base(plane_state);
11189 pos = intel_cursor_position(plane_state);
11192 spin_lock_irqsave(&dev_priv->uncore.lock, irqflags);
11195 * On some platforms writing CURCNTR first will also
11196 * cause CURPOS to be armed by the CURBASE write.
11197 * Without the CURCNTR write the CURPOS write would
11198 * arm itself. Thus we always update CURCNTR before
11201 * On other platforms CURPOS always requires the
11202 * CURBASE write to arm the update. Additonally
11203 * a write to any of the cursor register will cancel
11204 * an already armed cursor update. Thus leaving out
11205 * the CURBASE write after CURPOS could lead to a
11206 * cursor that doesn't appear to move, or even change
11207 * shape. Thus we always write CURBASE.
11209 * The other registers are armed by by the CURBASE write
11210 * except when the plane is getting enabled at which time
11211 * the CURCNTR write arms the update.
11214 if (INTEL_GEN(dev_priv) >= 9)
11215 skl_write_cursor_wm(plane, crtc_state);
11217 if (plane->cursor.base != base ||
11218 plane->cursor.size != fbc_ctl ||
11219 plane->cursor.cntl != cntl) {
11220 if (HAS_CUR_FBC(dev_priv))
11221 I915_WRITE_FW(CUR_FBC_CTL(pipe), fbc_ctl);
11222 I915_WRITE_FW(CURCNTR(pipe), cntl);
11223 I915_WRITE_FW(CURPOS(pipe), pos);
11224 I915_WRITE_FW(CURBASE(pipe), base);
11226 plane->cursor.base = base;
11227 plane->cursor.size = fbc_ctl;
11228 plane->cursor.cntl = cntl;
11230 I915_WRITE_FW(CURPOS(pipe), pos);
11231 I915_WRITE_FW(CURBASE(pipe), base);
11234 spin_unlock_irqrestore(&dev_priv->uncore.lock, irqflags);
11237 static void i9xx_disable_cursor(struct intel_plane *plane,
11238 const struct intel_crtc_state *crtc_state)
11240 i9xx_update_cursor(plane, crtc_state, NULL);
11243 static bool i9xx_cursor_get_hw_state(struct intel_plane *plane,
11246 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
11247 enum intel_display_power_domain power_domain;
11248 intel_wakeref_t wakeref;
11253 * Not 100% correct for planes that can move between pipes,
11254 * but that's only the case for gen2-3 which don't have any
11255 * display power wells.
11257 power_domain = POWER_DOMAIN_PIPE(plane->pipe);
11258 wakeref = intel_display_power_get_if_enabled(dev_priv, power_domain);
11262 val = I915_READ(CURCNTR(plane->pipe));
11264 ret = val & MCURSOR_MODE;
11266 if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
11267 *pipe = plane->pipe;
11269 *pipe = (val & MCURSOR_PIPE_SELECT_MASK) >>
11270 MCURSOR_PIPE_SELECT_SHIFT;
11272 intel_display_power_put(dev_priv, power_domain, wakeref);
11277 /* VESA 640x480x72Hz mode to set on the pipe */
11278 static const struct drm_display_mode load_detect_mode = {
11279 DRM_MODE("640x480", DRM_MODE_TYPE_DEFAULT, 31500, 640, 664,
11280 704, 832, 0, 480, 489, 491, 520, 0, DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC),
11283 struct drm_framebuffer *
11284 intel_framebuffer_create(struct drm_i915_gem_object *obj,
11285 struct drm_mode_fb_cmd2 *mode_cmd)
11287 struct intel_framebuffer *intel_fb;
11290 intel_fb = kzalloc(sizeof(*intel_fb), GFP_KERNEL);
11292 return ERR_PTR(-ENOMEM);
11294 ret = intel_framebuffer_init(intel_fb, obj, mode_cmd);
11298 return &intel_fb->base;
11302 return ERR_PTR(ret);
11305 static int intel_modeset_disable_planes(struct drm_atomic_state *state,
11306 struct drm_crtc *crtc)
11308 struct drm_plane *plane;
11309 struct drm_plane_state *plane_state;
11312 ret = drm_atomic_add_affected_planes(state, crtc);
11316 for_each_new_plane_in_state(state, plane, plane_state, i) {
11317 if (plane_state->crtc != crtc)
11320 ret = drm_atomic_set_crtc_for_plane(plane_state, NULL);
11324 drm_atomic_set_fb_for_plane(plane_state, NULL);
11330 int intel_get_load_detect_pipe(struct drm_connector *connector,
11331 struct intel_load_detect_pipe *old,
11332 struct drm_modeset_acquire_ctx *ctx)
11334 struct intel_crtc *intel_crtc;
11335 struct intel_encoder *intel_encoder =
11336 intel_attached_encoder(connector);
11337 struct drm_crtc *possible_crtc;
11338 struct drm_encoder *encoder = &intel_encoder->base;
11339 struct drm_crtc *crtc = NULL;
11340 struct drm_device *dev = encoder->dev;
11341 struct drm_i915_private *dev_priv = to_i915(dev);
11342 struct drm_mode_config *config = &dev->mode_config;
11343 struct drm_atomic_state *state = NULL, *restore_state = NULL;
11344 struct drm_connector_state *connector_state;
11345 struct intel_crtc_state *crtc_state;
11348 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
11349 connector->base.id, connector->name,
11350 encoder->base.id, encoder->name);
11352 old->restore_state = NULL;
11354 WARN_ON(!drm_modeset_is_locked(&config->connection_mutex));
11357 * Algorithm gets a little messy:
11359 * - if the connector already has an assigned crtc, use it (but make
11360 * sure it's on first)
11362 * - try to find the first unused crtc that can drive this connector,
11363 * and use that if we find one
11366 /* See if we already have a CRTC for this connector */
11367 if (connector->state->crtc) {
11368 crtc = connector->state->crtc;
11370 ret = drm_modeset_lock(&crtc->mutex, ctx);
11374 /* Make sure the crtc and connector are running */
11378 /* Find an unused one (if possible) */
11379 for_each_crtc(dev, possible_crtc) {
11381 if (!(encoder->possible_crtcs & (1 << i)))
11384 ret = drm_modeset_lock(&possible_crtc->mutex, ctx);
11388 if (possible_crtc->state->enable) {
11389 drm_modeset_unlock(&possible_crtc->mutex);
11393 crtc = possible_crtc;
11398 * If we didn't find an unused CRTC, don't use any.
11401 DRM_DEBUG_KMS("no pipe available for load-detect\n");
11407 intel_crtc = to_intel_crtc(crtc);
11409 state = drm_atomic_state_alloc(dev);
11410 restore_state = drm_atomic_state_alloc(dev);
11411 if (!state || !restore_state) {
11416 state->acquire_ctx = ctx;
11417 restore_state->acquire_ctx = ctx;
11419 connector_state = drm_atomic_get_connector_state(state, connector);
11420 if (IS_ERR(connector_state)) {
11421 ret = PTR_ERR(connector_state);
11425 ret = drm_atomic_set_crtc_for_connector(connector_state, crtc);
11429 crtc_state = intel_atomic_get_crtc_state(state, intel_crtc);
11430 if (IS_ERR(crtc_state)) {
11431 ret = PTR_ERR(crtc_state);
11435 crtc_state->base.active = crtc_state->base.enable = true;
11437 ret = drm_atomic_set_mode_for_crtc(&crtc_state->base,
11438 &load_detect_mode);
11442 ret = intel_modeset_disable_planes(state, crtc);
11446 ret = PTR_ERR_OR_ZERO(drm_atomic_get_connector_state(restore_state, connector));
11448 ret = PTR_ERR_OR_ZERO(drm_atomic_get_crtc_state(restore_state, crtc));
11450 ret = drm_atomic_add_affected_planes(restore_state, crtc);
11452 DRM_DEBUG_KMS("Failed to create a copy of old state to restore: %i\n", ret);
11456 ret = drm_atomic_commit(state);
11458 DRM_DEBUG_KMS("failed to set mode on load-detect pipe\n");
11462 old->restore_state = restore_state;
11463 drm_atomic_state_put(state);
11465 /* let the connector get through one full cycle before testing */
11466 intel_wait_for_vblank(dev_priv, intel_crtc->pipe);
11471 drm_atomic_state_put(state);
11474 if (restore_state) {
11475 drm_atomic_state_put(restore_state);
11476 restore_state = NULL;
11479 if (ret == -EDEADLK)
11485 void intel_release_load_detect_pipe(struct drm_connector *connector,
11486 struct intel_load_detect_pipe *old,
11487 struct drm_modeset_acquire_ctx *ctx)
11489 struct intel_encoder *intel_encoder =
11490 intel_attached_encoder(connector);
11491 struct drm_encoder *encoder = &intel_encoder->base;
11492 struct drm_atomic_state *state = old->restore_state;
11495 DRM_DEBUG_KMS("[CONNECTOR:%d:%s], [ENCODER:%d:%s]\n",
11496 connector->base.id, connector->name,
11497 encoder->base.id, encoder->name);
11502 ret = drm_atomic_helper_commit_duplicated_state(state, ctx);
11504 DRM_DEBUG_KMS("Couldn't release load detect pipe: %i\n", ret);
11505 drm_atomic_state_put(state);
11508 static int i9xx_pll_refclk(struct drm_device *dev,
11509 const struct intel_crtc_state *pipe_config)
11511 struct drm_i915_private *dev_priv = to_i915(dev);
11512 u32 dpll = pipe_config->dpll_hw_state.dpll;
11514 if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN)
11515 return dev_priv->vbt.lvds_ssc_freq;
11516 else if (HAS_PCH_SPLIT(dev_priv))
11518 else if (!IS_GEN(dev_priv, 2))
11524 /* Returns the clock of the currently programmed mode of the given pipe. */
11525 static void i9xx_crtc_clock_get(struct intel_crtc *crtc,
11526 struct intel_crtc_state *pipe_config)
11528 struct drm_device *dev = crtc->base.dev;
11529 struct drm_i915_private *dev_priv = to_i915(dev);
11530 enum pipe pipe = crtc->pipe;
11531 u32 dpll = pipe_config->dpll_hw_state.dpll;
11535 int refclk = i9xx_pll_refclk(dev, pipe_config);
11537 if ((dpll & DISPLAY_RATE_SELECT_FPA1) == 0)
11538 fp = pipe_config->dpll_hw_state.fp0;
11540 fp = pipe_config->dpll_hw_state.fp1;
11542 clock.m1 = (fp & FP_M1_DIV_MASK) >> FP_M1_DIV_SHIFT;
11543 if (IS_PINEVIEW(dev_priv)) {
11544 clock.n = ffs((fp & FP_N_PINEVIEW_DIV_MASK) >> FP_N_DIV_SHIFT) - 1;
11545 clock.m2 = (fp & FP_M2_PINEVIEW_DIV_MASK) >> FP_M2_DIV_SHIFT;
11547 clock.n = (fp & FP_N_DIV_MASK) >> FP_N_DIV_SHIFT;
11548 clock.m2 = (fp & FP_M2_DIV_MASK) >> FP_M2_DIV_SHIFT;
11551 if (!IS_GEN(dev_priv, 2)) {
11552 if (IS_PINEVIEW(dev_priv))
11553 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW) >>
11554 DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW);
11556 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK) >>
11557 DPLL_FPA01_P1_POST_DIV_SHIFT);
11559 switch (dpll & DPLL_MODE_MASK) {
11560 case DPLLB_MODE_DAC_SERIAL:
11561 clock.p2 = dpll & DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 ?
11564 case DPLLB_MODE_LVDS:
11565 clock.p2 = dpll & DPLLB_LVDS_P2_CLOCK_DIV_7 ?
11569 DRM_DEBUG_KMS("Unknown DPLL mode %08x in programmed "
11570 "mode\n", (int)(dpll & DPLL_MODE_MASK));
11574 if (IS_PINEVIEW(dev_priv))
11575 port_clock = pnv_calc_dpll_params(refclk, &clock);
11577 port_clock = i9xx_calc_dpll_params(refclk, &clock);
11579 u32 lvds = IS_I830(dev_priv) ? 0 : I915_READ(LVDS);
11580 bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN);
11583 clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >>
11584 DPLL_FPA01_P1_POST_DIV_SHIFT);
11586 if (lvds & LVDS_CLKB_POWER_UP)
11591 if (dpll & PLL_P1_DIVIDE_BY_TWO)
11594 clock.p1 = ((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830) >>
11595 DPLL_FPA01_P1_POST_DIV_SHIFT) + 2;
11597 if (dpll & PLL_P2_DIVIDE_BY_4)
11603 port_clock = i9xx_calc_dpll_params(refclk, &clock);
11607 * This value includes pixel_multiplier. We will use
11608 * port_clock to compute adjusted_mode.crtc_clock in the
11609 * encoder's get_config() function.
11611 pipe_config->port_clock = port_clock;
11614 int intel_dotclock_calculate(int link_freq,
11615 const struct intel_link_m_n *m_n)
11618 * The calculation for the data clock is:
11619 * pixel_clock = ((m/n)*(link_clock * nr_lanes))/bpp
11620 * But we want to avoid losing precison if possible, so:
11621 * pixel_clock = ((m * link_clock * nr_lanes)/(n*bpp))
11623 * and the link clock is simpler:
11624 * link_clock = (m * link_clock) / n
11630 return div_u64(mul_u32_u32(m_n->link_m, link_freq), m_n->link_n);
11633 static void ironlake_pch_clock_get(struct intel_crtc *crtc,
11634 struct intel_crtc_state *pipe_config)
11636 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
11638 /* read out port_clock from the DPLL */
11639 i9xx_crtc_clock_get(crtc, pipe_config);
11642 * In case there is an active pipe without active ports,
11643 * we may need some idea for the dotclock anyway.
11644 * Calculate one based on the FDI configuration.
11646 pipe_config->base.adjusted_mode.crtc_clock =
11647 intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
11648 &pipe_config->fdi_m_n);
11651 /* Returns the currently programmed mode of the given encoder. */
11652 struct drm_display_mode *
11653 intel_encoder_current_mode(struct intel_encoder *encoder)
11655 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
11656 struct intel_crtc_state *crtc_state;
11657 struct drm_display_mode *mode;
11658 struct intel_crtc *crtc;
11661 if (!encoder->get_hw_state(encoder, &pipe))
11664 crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
11666 mode = kzalloc(sizeof(*mode), GFP_KERNEL);
11670 crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
11676 crtc_state->base.crtc = &crtc->base;
11678 if (!dev_priv->display.get_pipe_config(crtc, crtc_state)) {
11684 encoder->get_config(encoder, crtc_state);
11686 intel_mode_from_pipe_config(mode, crtc_state);
11693 static void intel_crtc_destroy(struct drm_crtc *crtc)
11695 struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
11697 drm_crtc_cleanup(crtc);
11702 * intel_wm_need_update - Check whether watermarks need updating
11703 * @cur: current plane state
11704 * @new: new plane state
11706 * Check current plane state versus the new one to determine whether
11707 * watermarks need to be recalculated.
11709 * Returns true or false.
11711 static bool intel_wm_need_update(const struct intel_plane_state *cur,
11712 struct intel_plane_state *new)
11714 /* Update watermarks on tiling or size changes. */
11715 if (new->base.visible != cur->base.visible)
11718 if (!cur->base.fb || !new->base.fb)
11721 if (cur->base.fb->modifier != new->base.fb->modifier ||
11722 cur->base.rotation != new->base.rotation ||
11723 drm_rect_width(&new->base.src) != drm_rect_width(&cur->base.src) ||
11724 drm_rect_height(&new->base.src) != drm_rect_height(&cur->base.src) ||
11725 drm_rect_width(&new->base.dst) != drm_rect_width(&cur->base.dst) ||
11726 drm_rect_height(&new->base.dst) != drm_rect_height(&cur->base.dst))
11732 static bool needs_scaling(const struct intel_plane_state *state)
11734 int src_w = drm_rect_width(&state->base.src) >> 16;
11735 int src_h = drm_rect_height(&state->base.src) >> 16;
11736 int dst_w = drm_rect_width(&state->base.dst);
11737 int dst_h = drm_rect_height(&state->base.dst);
11739 return (src_w != dst_w || src_h != dst_h);
11742 int intel_plane_atomic_calc_changes(const struct intel_crtc_state *old_crtc_state,
11743 struct intel_crtc_state *crtc_state,
11744 const struct intel_plane_state *old_plane_state,
11745 struct intel_plane_state *plane_state)
11747 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
11748 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
11749 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
11750 bool mode_changed = needs_modeset(crtc_state);
11751 bool was_crtc_enabled = old_crtc_state->base.active;
11752 bool is_crtc_enabled = crtc_state->base.active;
11753 bool turn_off, turn_on, visible, was_visible;
11756 if (INTEL_GEN(dev_priv) >= 9 && plane->id != PLANE_CURSOR) {
11757 ret = skl_update_scaler_plane(crtc_state, plane_state);
11762 was_visible = old_plane_state->base.visible;
11763 visible = plane_state->base.visible;
11765 if (!was_crtc_enabled && WARN_ON(was_visible))
11766 was_visible = false;
11769 * Visibility is calculated as if the crtc was on, but
11770 * after scaler setup everything depends on it being off
11771 * when the crtc isn't active.
11773 * FIXME this is wrong for watermarks. Watermarks should also
11774 * be computed as if the pipe would be active. Perhaps move
11775 * per-plane wm computation to the .check_plane() hook, and
11776 * only combine the results from all planes in the current place?
11778 if (!is_crtc_enabled) {
11779 plane_state->base.visible = visible = false;
11780 crtc_state->active_planes &= ~BIT(plane->id);
11781 crtc_state->data_rate[plane->id] = 0;
11782 crtc_state->min_cdclk[plane->id] = 0;
11785 if (!was_visible && !visible)
11788 turn_off = was_visible && (!visible || mode_changed);
11789 turn_on = visible && (!was_visible || mode_changed);
11791 DRM_DEBUG_ATOMIC("[CRTC:%d:%s] with [PLANE:%d:%s] visible %i -> %i, off %i, on %i, ms %i\n",
11792 crtc->base.base.id, crtc->base.name,
11793 plane->base.base.id, plane->base.name,
11794 was_visible, visible,
11795 turn_off, turn_on, mode_changed);
11798 if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
11799 crtc_state->update_wm_pre = true;
11801 /* must disable cxsr around plane enable/disable */
11802 if (plane->id != PLANE_CURSOR)
11803 crtc_state->disable_cxsr = true;
11804 } else if (turn_off) {
11805 if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv))
11806 crtc_state->update_wm_post = true;
11808 /* must disable cxsr around plane enable/disable */
11809 if (plane->id != PLANE_CURSOR)
11810 crtc_state->disable_cxsr = true;
11811 } else if (intel_wm_need_update(old_plane_state, plane_state)) {
11812 if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv)) {
11813 /* FIXME bollocks */
11814 crtc_state->update_wm_pre = true;
11815 crtc_state->update_wm_post = true;
11819 if (visible || was_visible)
11820 crtc_state->fb_bits |= plane->frontbuffer_bit;
11823 * ILK/SNB DVSACNTR/Sprite Enable
11824 * IVB SPR_CTL/Sprite Enable
11825 * "When in Self Refresh Big FIFO mode, a write to enable the
11826 * plane will be internally buffered and delayed while Big FIFO
11827 * mode is exiting."
11829 * Which means that enabling the sprite can take an extra frame
11830 * when we start in big FIFO mode (LP1+). Thus we need to drop
11831 * down to LP0 and wait for vblank in order to make sure the
11832 * sprite gets enabled on the next vblank after the register write.
11833 * Doing otherwise would risk enabling the sprite one frame after
11834 * we've already signalled flip completion. We can resume LP1+
11835 * once the sprite has been enabled.
11838 * WaCxSRDisabledForSpriteScaling:ivb
11839 * IVB SPR_SCALE/Scaling Enable
11840 * "Low Power watermarks must be disabled for at least one
11841 * frame before enabling sprite scaling, and kept disabled
11842 * until sprite scaling is disabled."
11844 * ILK/SNB DVSASCALE/Scaling Enable
11845 * "When in Self Refresh Big FIFO mode, scaling enable will be
11846 * masked off while Big FIFO mode is exiting."
11848 * Despite the w/a only being listed for IVB we assume that
11849 * the ILK/SNB note has similar ramifications, hence we apply
11850 * the w/a on all three platforms.
11852 * With experimental results seems this is needed also for primary
11853 * plane, not only sprite plane.
11855 if (plane->id != PLANE_CURSOR &&
11856 (IS_GEN_RANGE(dev_priv, 5, 6) ||
11857 IS_IVYBRIDGE(dev_priv)) &&
11858 (turn_on || (!needs_scaling(old_plane_state) &&
11859 needs_scaling(plane_state))))
11860 crtc_state->disable_lp_wm = true;
11865 static bool encoders_cloneable(const struct intel_encoder *a,
11866 const struct intel_encoder *b)
11868 /* masks could be asymmetric, so check both ways */
11869 return a == b || (a->cloneable & (1 << b->type) &&
11870 b->cloneable & (1 << a->type));
11873 static bool check_single_encoder_cloning(struct drm_atomic_state *state,
11874 struct intel_crtc *crtc,
11875 struct intel_encoder *encoder)
11877 struct intel_encoder *source_encoder;
11878 struct drm_connector *connector;
11879 struct drm_connector_state *connector_state;
11882 for_each_new_connector_in_state(state, connector, connector_state, i) {
11883 if (connector_state->crtc != &crtc->base)
11887 to_intel_encoder(connector_state->best_encoder);
11888 if (!encoders_cloneable(encoder, source_encoder))
11895 static int icl_add_linked_planes(struct intel_atomic_state *state)
11897 struct intel_plane *plane, *linked;
11898 struct intel_plane_state *plane_state, *linked_plane_state;
11901 for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
11902 linked = plane_state->planar_linked_plane;
11907 linked_plane_state = intel_atomic_get_plane_state(state, linked);
11908 if (IS_ERR(linked_plane_state))
11909 return PTR_ERR(linked_plane_state);
11911 WARN_ON(linked_plane_state->planar_linked_plane != plane);
11912 WARN_ON(linked_plane_state->planar_slave == plane_state->planar_slave);
11918 static int icl_check_nv12_planes(struct intel_crtc_state *crtc_state)
11920 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
11921 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
11922 struct intel_atomic_state *state = to_intel_atomic_state(crtc_state->base.state);
11923 struct intel_plane *plane, *linked;
11924 struct intel_plane_state *plane_state;
11927 if (INTEL_GEN(dev_priv) < 11)
11931 * Destroy all old plane links and make the slave plane invisible
11932 * in the crtc_state->active_planes mask.
11934 for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
11935 if (plane->pipe != crtc->pipe || !plane_state->planar_linked_plane)
11938 plane_state->planar_linked_plane = NULL;
11939 if (plane_state->planar_slave && !plane_state->base.visible) {
11940 crtc_state->active_planes &= ~BIT(plane->id);
11941 crtc_state->update_planes |= BIT(plane->id);
11944 plane_state->planar_slave = false;
11947 if (!crtc_state->nv12_planes)
11950 for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
11951 struct intel_plane_state *linked_state = NULL;
11953 if (plane->pipe != crtc->pipe ||
11954 !(crtc_state->nv12_planes & BIT(plane->id)))
11957 for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, linked) {
11958 if (!icl_is_nv12_y_plane(linked->id))
11961 if (crtc_state->active_planes & BIT(linked->id))
11964 linked_state = intel_atomic_get_plane_state(state, linked);
11965 if (IS_ERR(linked_state))
11966 return PTR_ERR(linked_state);
11971 if (!linked_state) {
11972 DRM_DEBUG_KMS("Need %d free Y planes for planar YUV\n",
11973 hweight8(crtc_state->nv12_planes));
11978 plane_state->planar_linked_plane = linked;
11980 linked_state->planar_slave = true;
11981 linked_state->planar_linked_plane = plane;
11982 crtc_state->active_planes |= BIT(linked->id);
11983 crtc_state->update_planes |= BIT(linked->id);
11984 DRM_DEBUG_KMS("Using %s as Y plane for %s\n", linked->base.name, plane->base.name);
11990 static bool c8_planes_changed(const struct intel_crtc_state *new_crtc_state)
11992 struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->base.crtc);
11993 struct intel_atomic_state *state =
11994 to_intel_atomic_state(new_crtc_state->base.state);
11995 const struct intel_crtc_state *old_crtc_state =
11996 intel_atomic_get_old_crtc_state(state, crtc);
11998 return !old_crtc_state->c8_planes != !new_crtc_state->c8_planes;
12001 static int icl_add_sync_mode_crtcs(struct intel_crtc_state *crtc_state)
12003 struct drm_crtc *crtc = crtc_state->base.crtc;
12004 struct intel_atomic_state *state = to_intel_atomic_state(crtc_state->base.state);
12005 struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
12006 struct drm_connector *master_connector, *connector;
12007 struct drm_connector_state *connector_state;
12008 struct drm_connector_list_iter conn_iter;
12009 struct drm_crtc *master_crtc = NULL;
12010 struct drm_crtc_state *master_crtc_state;
12011 struct intel_crtc_state *master_pipe_config;
12012 int i, tile_group_id;
12014 if (INTEL_GEN(dev_priv) < 11)
12018 * In case of tiled displays there could be one or more slaves but there is
12019 * only one master. Lets make the CRTC used by the connector corresponding
12020 * to the last horizonal and last vertical tile a master/genlock CRTC.
12021 * All the other CRTCs corresponding to other tiles of the same Tile group
12022 * are the slave CRTCs and hold a pointer to their genlock CRTC.
12024 for_each_new_connector_in_state(&state->base, connector, connector_state, i) {
12025 if (connector_state->crtc != crtc)
12027 if (!connector->has_tile)
12029 if (crtc_state->base.mode.hdisplay != connector->tile_h_size ||
12030 crtc_state->base.mode.vdisplay != connector->tile_v_size)
12032 if (connector->tile_h_loc == connector->num_h_tile - 1 &&
12033 connector->tile_v_loc == connector->num_v_tile - 1)
12035 crtc_state->sync_mode_slaves_mask = 0;
12036 tile_group_id = connector->tile_group->id;
12037 drm_connector_list_iter_begin(&dev_priv->drm, &conn_iter);
12038 drm_for_each_connector_iter(master_connector, &conn_iter) {
12039 struct drm_connector_state *master_conn_state = NULL;
12041 if (!master_connector->has_tile)
12043 if (master_connector->tile_h_loc != master_connector->num_h_tile - 1 ||
12044 master_connector->tile_v_loc != master_connector->num_v_tile - 1)
12046 if (master_connector->tile_group->id != tile_group_id)
12049 master_conn_state = drm_atomic_get_connector_state(&state->base,
12051 if (IS_ERR(master_conn_state)) {
12052 drm_connector_list_iter_end(&conn_iter);
12053 return PTR_ERR(master_conn_state);
12055 if (master_conn_state->crtc) {
12056 master_crtc = master_conn_state->crtc;
12060 drm_connector_list_iter_end(&conn_iter);
12062 if (!master_crtc) {
12063 DRM_DEBUG_KMS("Could not find Master CRTC for Slave CRTC %d\n",
12064 connector_state->crtc->base.id);
12068 master_crtc_state = drm_atomic_get_crtc_state(&state->base,
12070 if (IS_ERR(master_crtc_state))
12071 return PTR_ERR(master_crtc_state);
12073 master_pipe_config = to_intel_crtc_state(master_crtc_state);
12074 crtc_state->master_transcoder = master_pipe_config->cpu_transcoder;
12075 master_pipe_config->sync_mode_slaves_mask |=
12076 BIT(crtc_state->cpu_transcoder);
12077 DRM_DEBUG_KMS("Master Transcoder = %s added for Slave CRTC = %d, slave transcoder bitmask = %d\n",
12078 transcoder_name(crtc_state->master_transcoder),
12079 crtc_state->base.crtc->base.id,
12080 master_pipe_config->sync_mode_slaves_mask);
12086 static int intel_crtc_atomic_check(struct intel_atomic_state *state,
12087 struct intel_crtc *crtc)
12089 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
12090 struct intel_crtc_state *crtc_state =
12091 intel_atomic_get_new_crtc_state(state, crtc);
12092 bool mode_changed = needs_modeset(crtc_state);
12095 if (INTEL_GEN(dev_priv) < 5 && !IS_G4X(dev_priv) &&
12096 mode_changed && !crtc_state->base.active)
12097 crtc_state->update_wm_post = true;
12099 if (mode_changed && crtc_state->base.enable &&
12100 dev_priv->display.crtc_compute_clock &&
12101 !WARN_ON(crtc_state->shared_dpll)) {
12102 ret = dev_priv->display.crtc_compute_clock(crtc, crtc_state);
12108 * May need to update pipe gamma enable bits
12109 * when C8 planes are getting enabled/disabled.
12111 if (c8_planes_changed(crtc_state))
12112 crtc_state->base.color_mgmt_changed = true;
12114 if (mode_changed || crtc_state->update_pipe ||
12115 crtc_state->base.color_mgmt_changed) {
12116 ret = intel_color_check(crtc_state);
12122 if (dev_priv->display.compute_pipe_wm) {
12123 ret = dev_priv->display.compute_pipe_wm(crtc_state);
12125 DRM_DEBUG_KMS("Target pipe watermarks are invalid\n");
12130 if (dev_priv->display.compute_intermediate_wm) {
12131 if (WARN_ON(!dev_priv->display.compute_pipe_wm))
12135 * Calculate 'intermediate' watermarks that satisfy both the
12136 * old state and the new state. We can program these
12139 ret = dev_priv->display.compute_intermediate_wm(crtc_state);
12141 DRM_DEBUG_KMS("No valid intermediate pipe watermarks are possible\n");
12146 if (INTEL_GEN(dev_priv) >= 9) {
12147 if (mode_changed || crtc_state->update_pipe)
12148 ret = skl_update_scaler_crtc(crtc_state);
12150 ret = intel_atomic_setup_scalers(dev_priv, crtc,
12154 if (HAS_IPS(dev_priv))
12155 crtc_state->ips_enabled = hsw_compute_ips_config(crtc_state);
12160 static void intel_modeset_update_connector_atomic_state(struct drm_device *dev)
12162 struct intel_connector *connector;
12163 struct drm_connector_list_iter conn_iter;
12165 drm_connector_list_iter_begin(dev, &conn_iter);
12166 for_each_intel_connector_iter(connector, &conn_iter) {
12167 if (connector->base.state->crtc)
12168 drm_connector_put(&connector->base);
12170 if (connector->base.encoder) {
12171 connector->base.state->best_encoder =
12172 connector->base.encoder;
12173 connector->base.state->crtc =
12174 connector->base.encoder->crtc;
12176 drm_connector_get(&connector->base);
12178 connector->base.state->best_encoder = NULL;
12179 connector->base.state->crtc = NULL;
12182 drm_connector_list_iter_end(&conn_iter);
12186 compute_sink_pipe_bpp(const struct drm_connector_state *conn_state,
12187 struct intel_crtc_state *pipe_config)
12189 struct drm_connector *connector = conn_state->connector;
12190 const struct drm_display_info *info = &connector->display_info;
12193 switch (conn_state->max_bpc) {
12210 if (bpp < pipe_config->pipe_bpp) {
12211 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Limiting display bpp to %d instead of "
12212 "EDID bpp %d, requested bpp %d, max platform bpp %d\n",
12213 connector->base.id, connector->name,
12214 bpp, 3 * info->bpc, 3 * conn_state->max_requested_bpc,
12215 pipe_config->pipe_bpp);
12217 pipe_config->pipe_bpp = bpp;
12224 compute_baseline_pipe_bpp(struct intel_crtc *crtc,
12225 struct intel_crtc_state *pipe_config)
12227 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
12228 struct drm_atomic_state *state = pipe_config->base.state;
12229 struct drm_connector *connector;
12230 struct drm_connector_state *connector_state;
12233 if ((IS_G4X(dev_priv) || IS_VALLEYVIEW(dev_priv) ||
12234 IS_CHERRYVIEW(dev_priv)))
12236 else if (INTEL_GEN(dev_priv) >= 5)
12241 pipe_config->pipe_bpp = bpp;
12243 /* Clamp display bpp to connector max bpp */
12244 for_each_new_connector_in_state(state, connector, connector_state, i) {
12247 if (connector_state->crtc != &crtc->base)
12250 ret = compute_sink_pipe_bpp(connector_state, pipe_config);
12258 static void intel_dump_crtc_timings(const struct drm_display_mode *mode)
12260 DRM_DEBUG_KMS("crtc timings: %d %d %d %d %d %d %d %d %d, "
12261 "type: 0x%x flags: 0x%x\n",
12263 mode->crtc_hdisplay, mode->crtc_hsync_start,
12264 mode->crtc_hsync_end, mode->crtc_htotal,
12265 mode->crtc_vdisplay, mode->crtc_vsync_start,
12266 mode->crtc_vsync_end, mode->crtc_vtotal,
12267 mode->type, mode->flags);
12271 intel_dump_m_n_config(const struct intel_crtc_state *pipe_config,
12272 const char *id, unsigned int lane_count,
12273 const struct intel_link_m_n *m_n)
12275 DRM_DEBUG_KMS("%s: lanes: %i; gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n",
12277 m_n->gmch_m, m_n->gmch_n,
12278 m_n->link_m, m_n->link_n, m_n->tu);
12282 intel_dump_infoframe(struct drm_i915_private *dev_priv,
12283 const union hdmi_infoframe *frame)
12285 if ((drm_debug & DRM_UT_KMS) == 0)
12288 hdmi_infoframe_log(KERN_DEBUG, dev_priv->drm.dev, frame);
12291 #define OUTPUT_TYPE(x) [INTEL_OUTPUT_ ## x] = #x
12293 static const char * const output_type_str[] = {
12294 OUTPUT_TYPE(UNUSED),
12295 OUTPUT_TYPE(ANALOG),
12299 OUTPUT_TYPE(TVOUT),
12305 OUTPUT_TYPE(DP_MST),
12310 static void snprintf_output_types(char *buf, size_t len,
12311 unsigned int output_types)
12318 for (i = 0; i < ARRAY_SIZE(output_type_str); i++) {
12321 if ((output_types & BIT(i)) == 0)
12324 r = snprintf(str, len, "%s%s",
12325 str != buf ? "," : "", output_type_str[i]);
12331 output_types &= ~BIT(i);
12334 WARN_ON_ONCE(output_types != 0);
12337 static const char * const output_format_str[] = {
12338 [INTEL_OUTPUT_FORMAT_INVALID] = "Invalid",
12339 [INTEL_OUTPUT_FORMAT_RGB] = "RGB",
12340 [INTEL_OUTPUT_FORMAT_YCBCR420] = "YCBCR4:2:0",
12341 [INTEL_OUTPUT_FORMAT_YCBCR444] = "YCBCR4:4:4",
12344 static const char *output_formats(enum intel_output_format format)
12346 if (format >= ARRAY_SIZE(output_format_str))
12347 format = INTEL_OUTPUT_FORMAT_INVALID;
12348 return output_format_str[format];
12351 static void intel_dump_plane_state(const struct intel_plane_state *plane_state)
12353 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
12354 const struct drm_framebuffer *fb = plane_state->base.fb;
12355 struct drm_format_name_buf format_name;
12358 DRM_DEBUG_KMS("[PLANE:%d:%s] fb: [NOFB], visible: %s\n",
12359 plane->base.base.id, plane->base.name,
12360 yesno(plane_state->base.visible));
12364 DRM_DEBUG_KMS("[PLANE:%d:%s] fb: [FB:%d] %ux%u format = %s, visible: %s\n",
12365 plane->base.base.id, plane->base.name,
12366 fb->base.id, fb->width, fb->height,
12367 drm_get_format_name(fb->format->format, &format_name),
12368 yesno(plane_state->base.visible));
12369 DRM_DEBUG_KMS("\trotation: 0x%x, scaler: %d\n",
12370 plane_state->base.rotation, plane_state->scaler_id);
12371 if (plane_state->base.visible)
12372 DRM_DEBUG_KMS("\tsrc: " DRM_RECT_FP_FMT " dst: " DRM_RECT_FMT "\n",
12373 DRM_RECT_FP_ARG(&plane_state->base.src),
12374 DRM_RECT_ARG(&plane_state->base.dst));
12377 static void intel_dump_pipe_config(const struct intel_crtc_state *pipe_config,
12378 struct intel_atomic_state *state,
12379 const char *context)
12381 struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
12382 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
12383 const struct intel_plane_state *plane_state;
12384 struct intel_plane *plane;
12388 DRM_DEBUG_KMS("[CRTC:%d:%s] enable: %s %s\n",
12389 crtc->base.base.id, crtc->base.name,
12390 yesno(pipe_config->base.enable), context);
12392 if (!pipe_config->base.enable)
12395 snprintf_output_types(buf, sizeof(buf), pipe_config->output_types);
12396 DRM_DEBUG_KMS("active: %s, output_types: %s (0x%x), output format: %s\n",
12397 yesno(pipe_config->base.active),
12398 buf, pipe_config->output_types,
12399 output_formats(pipe_config->output_format));
12401 DRM_DEBUG_KMS("cpu_transcoder: %s, pipe bpp: %i, dithering: %i\n",
12402 transcoder_name(pipe_config->cpu_transcoder),
12403 pipe_config->pipe_bpp, pipe_config->dither);
12405 if (pipe_config->has_pch_encoder)
12406 intel_dump_m_n_config(pipe_config, "fdi",
12407 pipe_config->fdi_lanes,
12408 &pipe_config->fdi_m_n);
12410 if (intel_crtc_has_dp_encoder(pipe_config)) {
12411 intel_dump_m_n_config(pipe_config, "dp m_n",
12412 pipe_config->lane_count, &pipe_config->dp_m_n);
12413 if (pipe_config->has_drrs)
12414 intel_dump_m_n_config(pipe_config, "dp m2_n2",
12415 pipe_config->lane_count,
12416 &pipe_config->dp_m2_n2);
12419 DRM_DEBUG_KMS("audio: %i, infoframes: %i, infoframes enabled: 0x%x\n",
12420 pipe_config->has_audio, pipe_config->has_infoframe,
12421 pipe_config->infoframes.enable);
12423 if (pipe_config->infoframes.enable &
12424 intel_hdmi_infoframe_enable(HDMI_PACKET_TYPE_GENERAL_CONTROL))
12425 DRM_DEBUG_KMS("GCP: 0x%x\n", pipe_config->infoframes.gcp);
12426 if (pipe_config->infoframes.enable &
12427 intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_AVI))
12428 intel_dump_infoframe(dev_priv, &pipe_config->infoframes.avi);
12429 if (pipe_config->infoframes.enable &
12430 intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_SPD))
12431 intel_dump_infoframe(dev_priv, &pipe_config->infoframes.spd);
12432 if (pipe_config->infoframes.enable &
12433 intel_hdmi_infoframe_enable(HDMI_INFOFRAME_TYPE_VENDOR))
12434 intel_dump_infoframe(dev_priv, &pipe_config->infoframes.hdmi);
12436 DRM_DEBUG_KMS("requested mode:\n");
12437 drm_mode_debug_printmodeline(&pipe_config->base.mode);
12438 DRM_DEBUG_KMS("adjusted mode:\n");
12439 drm_mode_debug_printmodeline(&pipe_config->base.adjusted_mode);
12440 intel_dump_crtc_timings(&pipe_config->base.adjusted_mode);
12441 DRM_DEBUG_KMS("port clock: %d, pipe src size: %dx%d, pixel rate %d\n",
12442 pipe_config->port_clock,
12443 pipe_config->pipe_src_w, pipe_config->pipe_src_h,
12444 pipe_config->pixel_rate);
12446 if (INTEL_GEN(dev_priv) >= 9)
12447 DRM_DEBUG_KMS("num_scalers: %d, scaler_users: 0x%x, scaler_id: %d\n",
12449 pipe_config->scaler_state.scaler_users,
12450 pipe_config->scaler_state.scaler_id);
12452 if (HAS_GMCH(dev_priv))
12453 DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n",
12454 pipe_config->gmch_pfit.control,
12455 pipe_config->gmch_pfit.pgm_ratios,
12456 pipe_config->gmch_pfit.lvds_border_bits);
12458 DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x, %s, force thru: %s\n",
12459 pipe_config->pch_pfit.pos,
12460 pipe_config->pch_pfit.size,
12461 enableddisabled(pipe_config->pch_pfit.enabled),
12462 yesno(pipe_config->pch_pfit.force_thru));
12464 DRM_DEBUG_KMS("ips: %i, double wide: %i\n",
12465 pipe_config->ips_enabled, pipe_config->double_wide);
12467 intel_dpll_dump_hw_state(dev_priv, &pipe_config->dpll_hw_state);
12469 if (IS_CHERRYVIEW(dev_priv))
12470 DRM_DEBUG_KMS("cgm_mode: 0x%x gamma_mode: 0x%x gamma_enable: %d csc_enable: %d\n",
12471 pipe_config->cgm_mode, pipe_config->gamma_mode,
12472 pipe_config->gamma_enable, pipe_config->csc_enable);
12474 DRM_DEBUG_KMS("csc_mode: 0x%x gamma_mode: 0x%x gamma_enable: %d csc_enable: %d\n",
12475 pipe_config->csc_mode, pipe_config->gamma_mode,
12476 pipe_config->gamma_enable, pipe_config->csc_enable);
12482 for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
12483 if (plane->pipe == crtc->pipe)
12484 intel_dump_plane_state(plane_state);
12488 static bool check_digital_port_conflicts(struct intel_atomic_state *state)
12490 struct drm_device *dev = state->base.dev;
12491 struct drm_connector *connector;
12492 struct drm_connector_list_iter conn_iter;
12493 unsigned int used_ports = 0;
12494 unsigned int used_mst_ports = 0;
12498 * We're going to peek into connector->state,
12499 * hence connection_mutex must be held.
12501 drm_modeset_lock_assert_held(&dev->mode_config.connection_mutex);
12504 * Walk the connector list instead of the encoder
12505 * list to detect the problem on ddi platforms
12506 * where there's just one encoder per digital port.
12508 drm_connector_list_iter_begin(dev, &conn_iter);
12509 drm_for_each_connector_iter(connector, &conn_iter) {
12510 struct drm_connector_state *connector_state;
12511 struct intel_encoder *encoder;
12514 drm_atomic_get_new_connector_state(&state->base,
12516 if (!connector_state)
12517 connector_state = connector->state;
12519 if (!connector_state->best_encoder)
12522 encoder = to_intel_encoder(connector_state->best_encoder);
12524 WARN_ON(!connector_state->crtc);
12526 switch (encoder->type) {
12527 unsigned int port_mask;
12528 case INTEL_OUTPUT_DDI:
12529 if (WARN_ON(!HAS_DDI(to_i915(dev))))
12531 /* else, fall through */
12532 case INTEL_OUTPUT_DP:
12533 case INTEL_OUTPUT_HDMI:
12534 case INTEL_OUTPUT_EDP:
12535 port_mask = 1 << encoder->port;
12537 /* the same port mustn't appear more than once */
12538 if (used_ports & port_mask)
12541 used_ports |= port_mask;
12543 case INTEL_OUTPUT_DP_MST:
12545 1 << encoder->port;
12551 drm_connector_list_iter_end(&conn_iter);
12553 /* can't mix MST and SST/HDMI on the same port */
12554 if (used_ports & used_mst_ports)
12561 clear_intel_crtc_state(struct intel_crtc_state *crtc_state)
12563 struct drm_i915_private *dev_priv =
12564 to_i915(crtc_state->base.crtc->dev);
12565 struct intel_crtc_state *saved_state;
12567 saved_state = kzalloc(sizeof(*saved_state), GFP_KERNEL);
12571 /* FIXME: before the switch to atomic started, a new pipe_config was
12572 * kzalloc'd. Code that depends on any field being zero should be
12573 * fixed, so that the crtc_state can be safely duplicated. For now,
12574 * only fields that are know to not cause problems are preserved. */
12576 saved_state->scaler_state = crtc_state->scaler_state;
12577 saved_state->shared_dpll = crtc_state->shared_dpll;
12578 saved_state->dpll_hw_state = crtc_state->dpll_hw_state;
12579 memcpy(saved_state->icl_port_dplls, crtc_state->icl_port_dplls,
12580 sizeof(saved_state->icl_port_dplls));
12581 saved_state->crc_enabled = crtc_state->crc_enabled;
12582 if (IS_G4X(dev_priv) ||
12583 IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
12584 saved_state->wm = crtc_state->wm;
12586 * Save the slave bitmask which gets filled for master crtc state during
12587 * slave atomic check call.
12589 if (is_trans_port_sync_master(crtc_state))
12590 saved_state->sync_mode_slaves_mask =
12591 crtc_state->sync_mode_slaves_mask;
12593 /* Keep base drm_crtc_state intact, only clear our extended struct */
12594 BUILD_BUG_ON(offsetof(struct intel_crtc_state, base));
12595 memcpy(&crtc_state->base + 1, &saved_state->base + 1,
12596 sizeof(*crtc_state) - sizeof(crtc_state->base));
12598 kfree(saved_state);
12603 intel_modeset_pipe_config(struct intel_crtc_state *pipe_config)
12605 struct drm_crtc *crtc = pipe_config->base.crtc;
12606 struct drm_atomic_state *state = pipe_config->base.state;
12607 struct intel_encoder *encoder;
12608 struct drm_connector *connector;
12609 struct drm_connector_state *connector_state;
12614 ret = clear_intel_crtc_state(pipe_config);
12618 pipe_config->cpu_transcoder =
12619 (enum transcoder) to_intel_crtc(crtc)->pipe;
12622 * Sanitize sync polarity flags based on requested ones. If neither
12623 * positive or negative polarity is requested, treat this as meaning
12624 * negative polarity.
12626 if (!(pipe_config->base.adjusted_mode.flags &
12627 (DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NHSYNC)))
12628 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NHSYNC;
12630 if (!(pipe_config->base.adjusted_mode.flags &
12631 (DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_NVSYNC)))
12632 pipe_config->base.adjusted_mode.flags |= DRM_MODE_FLAG_NVSYNC;
12634 ret = compute_baseline_pipe_bpp(to_intel_crtc(crtc),
12639 base_bpp = pipe_config->pipe_bpp;
12642 * Determine the real pipe dimensions. Note that stereo modes can
12643 * increase the actual pipe size due to the frame doubling and
12644 * insertion of additional space for blanks between the frame. This
12645 * is stored in the crtc timings. We use the requested mode to do this
12646 * computation to clearly distinguish it from the adjusted mode, which
12647 * can be changed by the connectors in the below retry loop.
12649 drm_mode_get_hv_timing(&pipe_config->base.mode,
12650 &pipe_config->pipe_src_w,
12651 &pipe_config->pipe_src_h);
12653 for_each_new_connector_in_state(state, connector, connector_state, i) {
12654 if (connector_state->crtc != crtc)
12657 encoder = to_intel_encoder(connector_state->best_encoder);
12659 if (!check_single_encoder_cloning(state, to_intel_crtc(crtc), encoder)) {
12660 DRM_DEBUG_KMS("rejecting invalid cloning configuration\n");
12665 * Determine output_types before calling the .compute_config()
12666 * hooks so that the hooks can use this information safely.
12668 if (encoder->compute_output_type)
12669 pipe_config->output_types |=
12670 BIT(encoder->compute_output_type(encoder, pipe_config,
12673 pipe_config->output_types |= BIT(encoder->type);
12677 /* Ensure the port clock defaults are reset when retrying. */
12678 pipe_config->port_clock = 0;
12679 pipe_config->pixel_multiplier = 1;
12681 /* Fill in default crtc timings, allow encoders to overwrite them. */
12682 drm_mode_set_crtcinfo(&pipe_config->base.adjusted_mode,
12683 CRTC_STEREO_DOUBLE);
12685 /* Set the crtc_state defaults for trans_port_sync */
12686 pipe_config->master_transcoder = INVALID_TRANSCODER;
12687 ret = icl_add_sync_mode_crtcs(pipe_config);
12689 DRM_DEBUG_KMS("Cannot assign Sync Mode CRTCs: %d\n",
12694 /* Pass our mode to the connectors and the CRTC to give them a chance to
12695 * adjust it according to limitations or connector properties, and also
12696 * a chance to reject the mode entirely.
12698 for_each_new_connector_in_state(state, connector, connector_state, i) {
12699 if (connector_state->crtc != crtc)
12702 encoder = to_intel_encoder(connector_state->best_encoder);
12703 ret = encoder->compute_config(encoder, pipe_config,
12706 if (ret != -EDEADLK)
12707 DRM_DEBUG_KMS("Encoder config failure: %d\n",
12713 /* Set default port clock if not overwritten by the encoder. Needs to be
12714 * done afterwards in case the encoder adjusts the mode. */
12715 if (!pipe_config->port_clock)
12716 pipe_config->port_clock = pipe_config->base.adjusted_mode.crtc_clock
12717 * pipe_config->pixel_multiplier;
12719 ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config);
12720 if (ret == -EDEADLK)
12723 DRM_DEBUG_KMS("CRTC fixup failed\n");
12727 if (ret == RETRY) {
12728 if (WARN(!retry, "loop in pipe configuration computation\n"))
12731 DRM_DEBUG_KMS("CRTC bw constrained, retrying\n");
12733 goto encoder_retry;
12736 /* Dithering seems to not pass-through bits correctly when it should, so
12737 * only enable it on 6bpc panels and when its not a compliance
12738 * test requesting 6bpc video pattern.
12740 pipe_config->dither = (pipe_config->pipe_bpp == 6*3) &&
12741 !pipe_config->dither_force_disable;
12742 DRM_DEBUG_KMS("hw max bpp: %i, pipe bpp: %i, dithering: %i\n",
12743 base_bpp, pipe_config->pipe_bpp, pipe_config->dither);
12748 bool intel_fuzzy_clock_check(int clock1, int clock2)
12752 if (clock1 == clock2)
12755 if (!clock1 || !clock2)
12758 diff = abs(clock1 - clock2);
12760 if (((((diff + clock1 + clock2) * 100)) / (clock1 + clock2)) < 105)
12767 intel_compare_m_n(unsigned int m, unsigned int n,
12768 unsigned int m2, unsigned int n2,
12771 if (m == m2 && n == n2)
12774 if (exact || !m || !n || !m2 || !n2)
12777 BUILD_BUG_ON(DATA_LINK_M_N_MASK > INT_MAX);
12784 } else if (n < n2) {
12794 return intel_fuzzy_clock_check(m, m2);
12798 intel_compare_link_m_n(const struct intel_link_m_n *m_n,
12799 const struct intel_link_m_n *m2_n2,
12802 return m_n->tu == m2_n2->tu &&
12803 intel_compare_m_n(m_n->gmch_m, m_n->gmch_n,
12804 m2_n2->gmch_m, m2_n2->gmch_n, exact) &&
12805 intel_compare_m_n(m_n->link_m, m_n->link_n,
12806 m2_n2->link_m, m2_n2->link_n, exact);
12810 intel_compare_infoframe(const union hdmi_infoframe *a,
12811 const union hdmi_infoframe *b)
12813 return memcmp(a, b, sizeof(*a)) == 0;
12817 pipe_config_infoframe_mismatch(struct drm_i915_private *dev_priv,
12818 bool fastset, const char *name,
12819 const union hdmi_infoframe *a,
12820 const union hdmi_infoframe *b)
12823 if ((drm_debug & DRM_UT_KMS) == 0)
12826 DRM_DEBUG_KMS("fastset mismatch in %s infoframe\n", name);
12827 DRM_DEBUG_KMS("expected:\n");
12828 hdmi_infoframe_log(KERN_DEBUG, dev_priv->drm.dev, a);
12829 DRM_DEBUG_KMS("found:\n");
12830 hdmi_infoframe_log(KERN_DEBUG, dev_priv->drm.dev, b);
12832 DRM_ERROR("mismatch in %s infoframe\n", name);
12833 DRM_ERROR("expected:\n");
12834 hdmi_infoframe_log(KERN_ERR, dev_priv->drm.dev, a);
12835 DRM_ERROR("found:\n");
12836 hdmi_infoframe_log(KERN_ERR, dev_priv->drm.dev, b);
12840 static void __printf(4, 5)
12841 pipe_config_mismatch(bool fastset, const struct intel_crtc *crtc,
12842 const char *name, const char *format, ...)
12844 struct va_format vaf;
12847 va_start(args, format);
12852 DRM_DEBUG_KMS("[CRTC:%d:%s] fastset mismatch in %s %pV\n",
12853 crtc->base.base.id, crtc->base.name, name, &vaf);
12855 DRM_ERROR("[CRTC:%d:%s] mismatch in %s %pV\n",
12856 crtc->base.base.id, crtc->base.name, name, &vaf);
12861 static bool fastboot_enabled(struct drm_i915_private *dev_priv)
12863 if (i915_modparams.fastboot != -1)
12864 return i915_modparams.fastboot;
12866 /* Enable fastboot by default on Skylake and newer */
12867 if (INTEL_GEN(dev_priv) >= 9)
12870 /* Enable fastboot by default on VLV and CHV */
12871 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
12874 /* Disabled by default on all others */
12879 intel_pipe_config_compare(const struct intel_crtc_state *current_config,
12880 const struct intel_crtc_state *pipe_config,
12883 struct drm_i915_private *dev_priv = to_i915(current_config->base.crtc->dev);
12884 struct intel_crtc *crtc = to_intel_crtc(pipe_config->base.crtc);
12887 bool fixup_inherited = fastset &&
12888 (current_config->base.mode.private_flags & I915_MODE_FLAG_INHERITED) &&
12889 !(pipe_config->base.mode.private_flags & I915_MODE_FLAG_INHERITED);
12891 if (fixup_inherited && !fastboot_enabled(dev_priv)) {
12892 DRM_DEBUG_KMS("initial modeset and fastboot not set\n");
12896 #define PIPE_CONF_CHECK_X(name) do { \
12897 if (current_config->name != pipe_config->name) { \
12898 pipe_config_mismatch(fastset, crtc, __stringify(name), \
12899 "(expected 0x%08x, found 0x%08x)", \
12900 current_config->name, \
12901 pipe_config->name); \
12906 #define PIPE_CONF_CHECK_I(name) do { \
12907 if (current_config->name != pipe_config->name) { \
12908 pipe_config_mismatch(fastset, crtc, __stringify(name), \
12909 "(expected %i, found %i)", \
12910 current_config->name, \
12911 pipe_config->name); \
12916 #define PIPE_CONF_CHECK_BOOL(name) do { \
12917 if (current_config->name != pipe_config->name) { \
12918 pipe_config_mismatch(fastset, crtc, __stringify(name), \
12919 "(expected %s, found %s)", \
12920 yesno(current_config->name), \
12921 yesno(pipe_config->name)); \
12927 * Checks state where we only read out the enabling, but not the entire
12928 * state itself (like full infoframes or ELD for audio). These states
12929 * require a full modeset on bootup to fix up.
12931 #define PIPE_CONF_CHECK_BOOL_INCOMPLETE(name) do { \
12932 if (!fixup_inherited || (!current_config->name && !pipe_config->name)) { \
12933 PIPE_CONF_CHECK_BOOL(name); \
12935 pipe_config_mismatch(fastset, crtc, __stringify(name), \
12936 "unable to verify whether state matches exactly, forcing modeset (expected %s, found %s)", \
12937 yesno(current_config->name), \
12938 yesno(pipe_config->name)); \
12943 #define PIPE_CONF_CHECK_P(name) do { \
12944 if (current_config->name != pipe_config->name) { \
12945 pipe_config_mismatch(fastset, crtc, __stringify(name), \
12946 "(expected %p, found %p)", \
12947 current_config->name, \
12948 pipe_config->name); \
12953 #define PIPE_CONF_CHECK_M_N(name) do { \
12954 if (!intel_compare_link_m_n(¤t_config->name, \
12955 &pipe_config->name,\
12957 pipe_config_mismatch(fastset, crtc, __stringify(name), \
12958 "(expected tu %i gmch %i/%i link %i/%i, " \
12959 "found tu %i, gmch %i/%i link %i/%i)", \
12960 current_config->name.tu, \
12961 current_config->name.gmch_m, \
12962 current_config->name.gmch_n, \
12963 current_config->name.link_m, \
12964 current_config->name.link_n, \
12965 pipe_config->name.tu, \
12966 pipe_config->name.gmch_m, \
12967 pipe_config->name.gmch_n, \
12968 pipe_config->name.link_m, \
12969 pipe_config->name.link_n); \
12974 /* This is required for BDW+ where there is only one set of registers for
12975 * switching between high and low RR.
12976 * This macro can be used whenever a comparison has to be made between one
12977 * hw state and multiple sw state variables.
12979 #define PIPE_CONF_CHECK_M_N_ALT(name, alt_name) do { \
12980 if (!intel_compare_link_m_n(¤t_config->name, \
12981 &pipe_config->name, !fastset) && \
12982 !intel_compare_link_m_n(¤t_config->alt_name, \
12983 &pipe_config->name, !fastset)) { \
12984 pipe_config_mismatch(fastset, crtc, __stringify(name), \
12985 "(expected tu %i gmch %i/%i link %i/%i, " \
12986 "or tu %i gmch %i/%i link %i/%i, " \
12987 "found tu %i, gmch %i/%i link %i/%i)", \
12988 current_config->name.tu, \
12989 current_config->name.gmch_m, \
12990 current_config->name.gmch_n, \
12991 current_config->name.link_m, \
12992 current_config->name.link_n, \
12993 current_config->alt_name.tu, \
12994 current_config->alt_name.gmch_m, \
12995 current_config->alt_name.gmch_n, \
12996 current_config->alt_name.link_m, \
12997 current_config->alt_name.link_n, \
12998 pipe_config->name.tu, \
12999 pipe_config->name.gmch_m, \
13000 pipe_config->name.gmch_n, \
13001 pipe_config->name.link_m, \
13002 pipe_config->name.link_n); \
13007 #define PIPE_CONF_CHECK_FLAGS(name, mask) do { \
13008 if ((current_config->name ^ pipe_config->name) & (mask)) { \
13009 pipe_config_mismatch(fastset, crtc, __stringify(name), \
13010 "(%x) (expected %i, found %i)", \
13012 current_config->name & (mask), \
13013 pipe_config->name & (mask)); \
13018 #define PIPE_CONF_CHECK_CLOCK_FUZZY(name) do { \
13019 if (!intel_fuzzy_clock_check(current_config->name, pipe_config->name)) { \
13020 pipe_config_mismatch(fastset, crtc, __stringify(name), \
13021 "(expected %i, found %i)", \
13022 current_config->name, \
13023 pipe_config->name); \
13028 #define PIPE_CONF_CHECK_INFOFRAME(name) do { \
13029 if (!intel_compare_infoframe(¤t_config->infoframes.name, \
13030 &pipe_config->infoframes.name)) { \
13031 pipe_config_infoframe_mismatch(dev_priv, fastset, __stringify(name), \
13032 ¤t_config->infoframes.name, \
13033 &pipe_config->infoframes.name); \
13038 #define PIPE_CONF_CHECK_COLOR_LUT(name1, name2, bit_precision) do { \
13039 if (current_config->name1 != pipe_config->name1) { \
13040 pipe_config_mismatch(fastset, crtc, __stringify(name1), \
13041 "(expected %i, found %i, won't compare lut values)", \
13042 current_config->name1, \
13043 pipe_config->name1); \
13046 if (!intel_color_lut_equal(current_config->name2, \
13047 pipe_config->name2, pipe_config->name1, \
13048 bit_precision)) { \
13049 pipe_config_mismatch(fastset, crtc, __stringify(name2), \
13050 "hw_state doesn't match sw_state"); \
13056 #define PIPE_CONF_QUIRK(quirk) \
13057 ((current_config->quirks | pipe_config->quirks) & (quirk))
13059 PIPE_CONF_CHECK_I(cpu_transcoder);
13061 PIPE_CONF_CHECK_BOOL(has_pch_encoder);
13062 PIPE_CONF_CHECK_I(fdi_lanes);
13063 PIPE_CONF_CHECK_M_N(fdi_m_n);
13065 PIPE_CONF_CHECK_I(lane_count);
13066 PIPE_CONF_CHECK_X(lane_lat_optim_mask);
13068 if (INTEL_GEN(dev_priv) < 8) {
13069 PIPE_CONF_CHECK_M_N(dp_m_n);
13071 if (current_config->has_drrs)
13072 PIPE_CONF_CHECK_M_N(dp_m2_n2);
13074 PIPE_CONF_CHECK_M_N_ALT(dp_m_n, dp_m2_n2);
13076 PIPE_CONF_CHECK_X(output_types);
13078 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hdisplay);
13079 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_htotal);
13080 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_start);
13081 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hblank_end);
13082 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_start);
13083 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_hsync_end);
13085 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vdisplay);
13086 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vtotal);
13087 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_start);
13088 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vblank_end);
13089 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_start);
13090 PIPE_CONF_CHECK_I(base.adjusted_mode.crtc_vsync_end);
13092 PIPE_CONF_CHECK_I(pixel_multiplier);
13093 PIPE_CONF_CHECK_I(output_format);
13094 PIPE_CONF_CHECK_I(dc3co_exitline);
13095 PIPE_CONF_CHECK_BOOL(has_hdmi_sink);
13096 if ((INTEL_GEN(dev_priv) < 8 && !IS_HASWELL(dev_priv)) ||
13097 IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
13098 PIPE_CONF_CHECK_BOOL(limited_color_range);
13100 PIPE_CONF_CHECK_BOOL(hdmi_scrambling);
13101 PIPE_CONF_CHECK_BOOL(hdmi_high_tmds_clock_ratio);
13102 PIPE_CONF_CHECK_BOOL(has_infoframe);
13103 PIPE_CONF_CHECK_BOOL(fec_enable);
13105 PIPE_CONF_CHECK_BOOL_INCOMPLETE(has_audio);
13107 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
13108 DRM_MODE_FLAG_INTERLACE);
13110 if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) {
13111 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
13112 DRM_MODE_FLAG_PHSYNC);
13113 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
13114 DRM_MODE_FLAG_NHSYNC);
13115 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
13116 DRM_MODE_FLAG_PVSYNC);
13117 PIPE_CONF_CHECK_FLAGS(base.adjusted_mode.flags,
13118 DRM_MODE_FLAG_NVSYNC);
13121 PIPE_CONF_CHECK_X(gmch_pfit.control);
13122 /* pfit ratios are autocomputed by the hw on gen4+ */
13123 if (INTEL_GEN(dev_priv) < 4)
13124 PIPE_CONF_CHECK_X(gmch_pfit.pgm_ratios);
13125 PIPE_CONF_CHECK_X(gmch_pfit.lvds_border_bits);
13128 * Changing the EDP transcoder input mux
13129 * (A_ONOFF vs. A_ON) requires a full modeset.
13131 PIPE_CONF_CHECK_BOOL(pch_pfit.force_thru);
13134 PIPE_CONF_CHECK_I(pipe_src_w);
13135 PIPE_CONF_CHECK_I(pipe_src_h);
13137 PIPE_CONF_CHECK_BOOL(pch_pfit.enabled);
13138 if (current_config->pch_pfit.enabled) {
13139 PIPE_CONF_CHECK_X(pch_pfit.pos);
13140 PIPE_CONF_CHECK_X(pch_pfit.size);
13143 PIPE_CONF_CHECK_I(scaler_state.scaler_id);
13144 PIPE_CONF_CHECK_CLOCK_FUZZY(pixel_rate);
13146 PIPE_CONF_CHECK_X(gamma_mode);
13147 if (IS_CHERRYVIEW(dev_priv))
13148 PIPE_CONF_CHECK_X(cgm_mode);
13150 PIPE_CONF_CHECK_X(csc_mode);
13151 PIPE_CONF_CHECK_BOOL(gamma_enable);
13152 PIPE_CONF_CHECK_BOOL(csc_enable);
13154 bp_gamma = intel_color_get_gamma_bit_precision(pipe_config);
13156 PIPE_CONF_CHECK_COLOR_LUT(gamma_mode, base.gamma_lut, bp_gamma);
13160 PIPE_CONF_CHECK_BOOL(double_wide);
13162 PIPE_CONF_CHECK_P(shared_dpll);
13163 PIPE_CONF_CHECK_X(dpll_hw_state.dpll);
13164 PIPE_CONF_CHECK_X(dpll_hw_state.dpll_md);
13165 PIPE_CONF_CHECK_X(dpll_hw_state.fp0);
13166 PIPE_CONF_CHECK_X(dpll_hw_state.fp1);
13167 PIPE_CONF_CHECK_X(dpll_hw_state.wrpll);
13168 PIPE_CONF_CHECK_X(dpll_hw_state.spll);
13169 PIPE_CONF_CHECK_X(dpll_hw_state.ctrl1);
13170 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr1);
13171 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr2);
13172 PIPE_CONF_CHECK_X(dpll_hw_state.cfgcr0);
13173 PIPE_CONF_CHECK_X(dpll_hw_state.ebb0);
13174 PIPE_CONF_CHECK_X(dpll_hw_state.ebb4);
13175 PIPE_CONF_CHECK_X(dpll_hw_state.pll0);
13176 PIPE_CONF_CHECK_X(dpll_hw_state.pll1);
13177 PIPE_CONF_CHECK_X(dpll_hw_state.pll2);
13178 PIPE_CONF_CHECK_X(dpll_hw_state.pll3);
13179 PIPE_CONF_CHECK_X(dpll_hw_state.pll6);
13180 PIPE_CONF_CHECK_X(dpll_hw_state.pll8);
13181 PIPE_CONF_CHECK_X(dpll_hw_state.pll9);
13182 PIPE_CONF_CHECK_X(dpll_hw_state.pll10);
13183 PIPE_CONF_CHECK_X(dpll_hw_state.pcsdw12);
13184 PIPE_CONF_CHECK_X(dpll_hw_state.mg_refclkin_ctl);
13185 PIPE_CONF_CHECK_X(dpll_hw_state.mg_clktop2_coreclkctl1);
13186 PIPE_CONF_CHECK_X(dpll_hw_state.mg_clktop2_hsclkctl);
13187 PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_div0);
13188 PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_div1);
13189 PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_lf);
13190 PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_frac_lock);
13191 PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_ssc);
13192 PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_bias);
13193 PIPE_CONF_CHECK_X(dpll_hw_state.mg_pll_tdc_coldst_bias);
13195 PIPE_CONF_CHECK_X(dsi_pll.ctrl);
13196 PIPE_CONF_CHECK_X(dsi_pll.div);
13198 if (IS_G4X(dev_priv) || INTEL_GEN(dev_priv) >= 5)
13199 PIPE_CONF_CHECK_I(pipe_bpp);
13201 PIPE_CONF_CHECK_CLOCK_FUZZY(base.adjusted_mode.crtc_clock);
13202 PIPE_CONF_CHECK_CLOCK_FUZZY(port_clock);
13204 PIPE_CONF_CHECK_I(min_voltage_level);
13206 PIPE_CONF_CHECK_X(infoframes.enable);
13207 PIPE_CONF_CHECK_X(infoframes.gcp);
13208 PIPE_CONF_CHECK_INFOFRAME(avi);
13209 PIPE_CONF_CHECK_INFOFRAME(spd);
13210 PIPE_CONF_CHECK_INFOFRAME(hdmi);
13211 PIPE_CONF_CHECK_INFOFRAME(drm);
13213 PIPE_CONF_CHECK_I(sync_mode_slaves_mask);
13214 PIPE_CONF_CHECK_I(master_transcoder);
13216 #undef PIPE_CONF_CHECK_X
13217 #undef PIPE_CONF_CHECK_I
13218 #undef PIPE_CONF_CHECK_BOOL
13219 #undef PIPE_CONF_CHECK_BOOL_INCOMPLETE
13220 #undef PIPE_CONF_CHECK_P
13221 #undef PIPE_CONF_CHECK_FLAGS
13222 #undef PIPE_CONF_CHECK_CLOCK_FUZZY
13223 #undef PIPE_CONF_CHECK_COLOR_LUT
13224 #undef PIPE_CONF_QUIRK
13229 static void intel_pipe_config_sanity_check(struct drm_i915_private *dev_priv,
13230 const struct intel_crtc_state *pipe_config)
13232 if (pipe_config->has_pch_encoder) {
13233 int fdi_dotclock = intel_dotclock_calculate(intel_fdi_link_freq(dev_priv, pipe_config),
13234 &pipe_config->fdi_m_n);
13235 int dotclock = pipe_config->base.adjusted_mode.crtc_clock;
13238 * FDI already provided one idea for the dotclock.
13239 * Yell if the encoder disagrees.
13241 WARN(!intel_fuzzy_clock_check(fdi_dotclock, dotclock),
13242 "FDI dotclock and encoder dotclock mismatch, fdi: %i, encoder: %i\n",
13243 fdi_dotclock, dotclock);
13247 static void verify_wm_state(struct intel_crtc *crtc,
13248 struct intel_crtc_state *new_crtc_state)
13250 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
13251 struct skl_hw_state {
13252 struct skl_ddb_entry ddb_y[I915_MAX_PLANES];
13253 struct skl_ddb_entry ddb_uv[I915_MAX_PLANES];
13254 struct skl_ddb_allocation ddb;
13255 struct skl_pipe_wm wm;
13257 struct skl_ddb_allocation *sw_ddb;
13258 struct skl_pipe_wm *sw_wm;
13259 struct skl_ddb_entry *hw_ddb_entry, *sw_ddb_entry;
13260 const enum pipe pipe = crtc->pipe;
13261 int plane, level, max_level = ilk_wm_max_level(dev_priv);
13263 if (INTEL_GEN(dev_priv) < 9 || !new_crtc_state->base.active)
13266 hw = kzalloc(sizeof(*hw), GFP_KERNEL);
13270 skl_pipe_wm_get_hw_state(crtc, &hw->wm);
13271 sw_wm = &new_crtc_state->wm.skl.optimal;
13273 skl_pipe_ddb_get_hw_state(crtc, hw->ddb_y, hw->ddb_uv);
13275 skl_ddb_get_hw_state(dev_priv, &hw->ddb);
13276 sw_ddb = &dev_priv->wm.skl_hw.ddb;
13278 if (INTEL_GEN(dev_priv) >= 11 &&
13279 hw->ddb.enabled_slices != sw_ddb->enabled_slices)
13280 DRM_ERROR("mismatch in DBUF Slices (expected %u, got %u)\n",
13281 sw_ddb->enabled_slices,
13282 hw->ddb.enabled_slices);
13285 for_each_universal_plane(dev_priv, pipe, plane) {
13286 struct skl_plane_wm *hw_plane_wm, *sw_plane_wm;
13288 hw_plane_wm = &hw->wm.planes[plane];
13289 sw_plane_wm = &sw_wm->planes[plane];
13292 for (level = 0; level <= max_level; level++) {
13293 if (skl_wm_level_equals(&hw_plane_wm->wm[level],
13294 &sw_plane_wm->wm[level]))
13297 DRM_ERROR("mismatch in WM pipe %c plane %d level %d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
13298 pipe_name(pipe), plane + 1, level,
13299 sw_plane_wm->wm[level].plane_en,
13300 sw_plane_wm->wm[level].plane_res_b,
13301 sw_plane_wm->wm[level].plane_res_l,
13302 hw_plane_wm->wm[level].plane_en,
13303 hw_plane_wm->wm[level].plane_res_b,
13304 hw_plane_wm->wm[level].plane_res_l);
13307 if (!skl_wm_level_equals(&hw_plane_wm->trans_wm,
13308 &sw_plane_wm->trans_wm)) {
13309 DRM_ERROR("mismatch in trans WM pipe %c plane %d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
13310 pipe_name(pipe), plane + 1,
13311 sw_plane_wm->trans_wm.plane_en,
13312 sw_plane_wm->trans_wm.plane_res_b,
13313 sw_plane_wm->trans_wm.plane_res_l,
13314 hw_plane_wm->trans_wm.plane_en,
13315 hw_plane_wm->trans_wm.plane_res_b,
13316 hw_plane_wm->trans_wm.plane_res_l);
13320 hw_ddb_entry = &hw->ddb_y[plane];
13321 sw_ddb_entry = &new_crtc_state->wm.skl.plane_ddb_y[plane];
13323 if (!skl_ddb_entry_equal(hw_ddb_entry, sw_ddb_entry)) {
13324 DRM_ERROR("mismatch in DDB state pipe %c plane %d (expected (%u,%u), found (%u,%u))\n",
13325 pipe_name(pipe), plane + 1,
13326 sw_ddb_entry->start, sw_ddb_entry->end,
13327 hw_ddb_entry->start, hw_ddb_entry->end);
13333 * If the cursor plane isn't active, we may not have updated it's ddb
13334 * allocation. In that case since the ddb allocation will be updated
13335 * once the plane becomes visible, we can skip this check
13338 struct skl_plane_wm *hw_plane_wm, *sw_plane_wm;
13340 hw_plane_wm = &hw->wm.planes[PLANE_CURSOR];
13341 sw_plane_wm = &sw_wm->planes[PLANE_CURSOR];
13344 for (level = 0; level <= max_level; level++) {
13345 if (skl_wm_level_equals(&hw_plane_wm->wm[level],
13346 &sw_plane_wm->wm[level]))
13349 DRM_ERROR("mismatch in WM pipe %c cursor level %d (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
13350 pipe_name(pipe), level,
13351 sw_plane_wm->wm[level].plane_en,
13352 sw_plane_wm->wm[level].plane_res_b,
13353 sw_plane_wm->wm[level].plane_res_l,
13354 hw_plane_wm->wm[level].plane_en,
13355 hw_plane_wm->wm[level].plane_res_b,
13356 hw_plane_wm->wm[level].plane_res_l);
13359 if (!skl_wm_level_equals(&hw_plane_wm->trans_wm,
13360 &sw_plane_wm->trans_wm)) {
13361 DRM_ERROR("mismatch in trans WM pipe %c cursor (expected e=%d b=%u l=%u, got e=%d b=%u l=%u)\n",
13363 sw_plane_wm->trans_wm.plane_en,
13364 sw_plane_wm->trans_wm.plane_res_b,
13365 sw_plane_wm->trans_wm.plane_res_l,
13366 hw_plane_wm->trans_wm.plane_en,
13367 hw_plane_wm->trans_wm.plane_res_b,
13368 hw_plane_wm->trans_wm.plane_res_l);
13372 hw_ddb_entry = &hw->ddb_y[PLANE_CURSOR];
13373 sw_ddb_entry = &new_crtc_state->wm.skl.plane_ddb_y[PLANE_CURSOR];
13375 if (!skl_ddb_entry_equal(hw_ddb_entry, sw_ddb_entry)) {
13376 DRM_ERROR("mismatch in DDB state pipe %c cursor (expected (%u,%u), found (%u,%u))\n",
13378 sw_ddb_entry->start, sw_ddb_entry->end,
13379 hw_ddb_entry->start, hw_ddb_entry->end);
13387 verify_connector_state(struct intel_atomic_state *state,
13388 struct intel_crtc *crtc)
13390 struct drm_connector *connector;
13391 struct drm_connector_state *new_conn_state;
13394 for_each_new_connector_in_state(&state->base, connector, new_conn_state, i) {
13395 struct drm_encoder *encoder = connector->encoder;
13396 struct intel_crtc_state *crtc_state = NULL;
13398 if (new_conn_state->crtc != &crtc->base)
13402 crtc_state = intel_atomic_get_new_crtc_state(state, crtc);
13404 intel_connector_verify_state(crtc_state, new_conn_state);
13406 I915_STATE_WARN(new_conn_state->best_encoder != encoder,
13407 "connector's atomic encoder doesn't match legacy encoder\n");
13412 verify_encoder_state(struct drm_i915_private *dev_priv, struct intel_atomic_state *state)
13414 struct intel_encoder *encoder;
13415 struct drm_connector *connector;
13416 struct drm_connector_state *old_conn_state, *new_conn_state;
13419 for_each_intel_encoder(&dev_priv->drm, encoder) {
13420 bool enabled = false, found = false;
13423 DRM_DEBUG_KMS("[ENCODER:%d:%s]\n",
13424 encoder->base.base.id,
13425 encoder->base.name);
13427 for_each_oldnew_connector_in_state(&state->base, connector, old_conn_state,
13428 new_conn_state, i) {
13429 if (old_conn_state->best_encoder == &encoder->base)
13432 if (new_conn_state->best_encoder != &encoder->base)
13434 found = enabled = true;
13436 I915_STATE_WARN(new_conn_state->crtc !=
13437 encoder->base.crtc,
13438 "connector's crtc doesn't match encoder crtc\n");
13444 I915_STATE_WARN(!!encoder->base.crtc != enabled,
13445 "encoder's enabled state mismatch "
13446 "(expected %i, found %i)\n",
13447 !!encoder->base.crtc, enabled);
13449 if (!encoder->base.crtc) {
13452 active = encoder->get_hw_state(encoder, &pipe);
13453 I915_STATE_WARN(active,
13454 "encoder detached but still enabled on pipe %c.\n",
13461 verify_crtc_state(struct intel_crtc *crtc,
13462 struct intel_crtc_state *old_crtc_state,
13463 struct intel_crtc_state *new_crtc_state)
13465 struct drm_device *dev = crtc->base.dev;
13466 struct drm_i915_private *dev_priv = to_i915(dev);
13467 struct intel_encoder *encoder;
13468 struct intel_crtc_state *pipe_config;
13469 struct drm_atomic_state *state;
13472 state = old_crtc_state->base.state;
13473 __drm_atomic_helper_crtc_destroy_state(&old_crtc_state->base);
13474 pipe_config = old_crtc_state;
13475 memset(pipe_config, 0, sizeof(*pipe_config));
13476 pipe_config->base.crtc = &crtc->base;
13477 pipe_config->base.state = state;
13479 DRM_DEBUG_KMS("[CRTC:%d:%s]\n", crtc->base.base.id, crtc->base.name);
13481 active = dev_priv->display.get_pipe_config(crtc, pipe_config);
13483 /* we keep both pipes enabled on 830 */
13484 if (IS_I830(dev_priv))
13485 active = new_crtc_state->base.active;
13487 I915_STATE_WARN(new_crtc_state->base.active != active,
13488 "crtc active state doesn't match with hw state "
13489 "(expected %i, found %i)\n", new_crtc_state->base.active, active);
13491 I915_STATE_WARN(crtc->active != new_crtc_state->base.active,
13492 "transitional active state does not match atomic hw state "
13493 "(expected %i, found %i)\n", new_crtc_state->base.active, crtc->active);
13495 for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
13498 active = encoder->get_hw_state(encoder, &pipe);
13499 I915_STATE_WARN(active != new_crtc_state->base.active,
13500 "[ENCODER:%i] active %i with crtc active %i\n",
13501 encoder->base.base.id, active, new_crtc_state->base.active);
13503 I915_STATE_WARN(active && crtc->pipe != pipe,
13504 "Encoder connected to wrong pipe %c\n",
13508 encoder->get_config(encoder, pipe_config);
13511 intel_crtc_compute_pixel_rate(pipe_config);
13513 if (!new_crtc_state->base.active)
13516 intel_pipe_config_sanity_check(dev_priv, pipe_config);
13518 if (!intel_pipe_config_compare(new_crtc_state,
13519 pipe_config, false)) {
13520 I915_STATE_WARN(1, "pipe state doesn't match!\n");
13521 intel_dump_pipe_config(pipe_config, NULL, "[hw state]");
13522 intel_dump_pipe_config(new_crtc_state, NULL, "[sw state]");
13527 intel_verify_planes(struct intel_atomic_state *state)
13529 struct intel_plane *plane;
13530 const struct intel_plane_state *plane_state;
13533 for_each_new_intel_plane_in_state(state, plane,
13535 assert_plane(plane, plane_state->planar_slave ||
13536 plane_state->base.visible);
13540 verify_single_dpll_state(struct drm_i915_private *dev_priv,
13541 struct intel_shared_dpll *pll,
13542 struct intel_crtc *crtc,
13543 struct intel_crtc_state *new_crtc_state)
13545 struct intel_dpll_hw_state dpll_hw_state;
13546 unsigned int crtc_mask;
13549 memset(&dpll_hw_state, 0, sizeof(dpll_hw_state));
13551 DRM_DEBUG_KMS("%s\n", pll->info->name);
13553 active = pll->info->funcs->get_hw_state(dev_priv, pll, &dpll_hw_state);
13555 if (!(pll->info->flags & INTEL_DPLL_ALWAYS_ON)) {
13556 I915_STATE_WARN(!pll->on && pll->active_mask,
13557 "pll in active use but not on in sw tracking\n");
13558 I915_STATE_WARN(pll->on && !pll->active_mask,
13559 "pll is on but not used by any active crtc\n");
13560 I915_STATE_WARN(pll->on != active,
13561 "pll on state mismatch (expected %i, found %i)\n",
13566 I915_STATE_WARN(pll->active_mask & ~pll->state.crtc_mask,
13567 "more active pll users than references: %x vs %x\n",
13568 pll->active_mask, pll->state.crtc_mask);
13573 crtc_mask = drm_crtc_mask(&crtc->base);
13575 if (new_crtc_state->base.active)
13576 I915_STATE_WARN(!(pll->active_mask & crtc_mask),
13577 "pll active mismatch (expected pipe %c in active mask 0x%02x)\n",
13578 pipe_name(drm_crtc_index(&crtc->base)), pll->active_mask);
13580 I915_STATE_WARN(pll->active_mask & crtc_mask,
13581 "pll active mismatch (didn't expect pipe %c in active mask 0x%02x)\n",
13582 pipe_name(drm_crtc_index(&crtc->base)), pll->active_mask);
13584 I915_STATE_WARN(!(pll->state.crtc_mask & crtc_mask),
13585 "pll enabled crtcs mismatch (expected 0x%x in 0x%02x)\n",
13586 crtc_mask, pll->state.crtc_mask);
13588 I915_STATE_WARN(pll->on && memcmp(&pll->state.hw_state,
13590 sizeof(dpll_hw_state)),
13591 "pll hw state mismatch\n");
13595 verify_shared_dpll_state(struct intel_crtc *crtc,
13596 struct intel_crtc_state *old_crtc_state,
13597 struct intel_crtc_state *new_crtc_state)
13599 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
13601 if (new_crtc_state->shared_dpll)
13602 verify_single_dpll_state(dev_priv, new_crtc_state->shared_dpll, crtc, new_crtc_state);
13604 if (old_crtc_state->shared_dpll &&
13605 old_crtc_state->shared_dpll != new_crtc_state->shared_dpll) {
13606 unsigned int crtc_mask = drm_crtc_mask(&crtc->base);
13607 struct intel_shared_dpll *pll = old_crtc_state->shared_dpll;
13609 I915_STATE_WARN(pll->active_mask & crtc_mask,
13610 "pll active mismatch (didn't expect pipe %c in active mask)\n",
13611 pipe_name(drm_crtc_index(&crtc->base)));
13612 I915_STATE_WARN(pll->state.crtc_mask & crtc_mask,
13613 "pll enabled crtcs mismatch (found %x in enabled mask)\n",
13614 pipe_name(drm_crtc_index(&crtc->base)));
13619 intel_modeset_verify_crtc(struct intel_crtc *crtc,
13620 struct intel_atomic_state *state,
13621 struct intel_crtc_state *old_crtc_state,
13622 struct intel_crtc_state *new_crtc_state)
13624 if (!needs_modeset(new_crtc_state) && !new_crtc_state->update_pipe)
13627 verify_wm_state(crtc, new_crtc_state);
13628 verify_connector_state(state, crtc);
13629 verify_crtc_state(crtc, old_crtc_state, new_crtc_state);
13630 verify_shared_dpll_state(crtc, old_crtc_state, new_crtc_state);
13634 verify_disabled_dpll_state(struct drm_i915_private *dev_priv)
13638 for (i = 0; i < dev_priv->num_shared_dpll; i++)
13639 verify_single_dpll_state(dev_priv, &dev_priv->shared_dplls[i], NULL, NULL);
13643 intel_modeset_verify_disabled(struct drm_i915_private *dev_priv,
13644 struct intel_atomic_state *state)
13646 verify_encoder_state(dev_priv, state);
13647 verify_connector_state(state, NULL);
13648 verify_disabled_dpll_state(dev_priv);
13652 intel_crtc_update_active_timings(const struct intel_crtc_state *crtc_state)
13654 struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
13655 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
13656 const struct drm_display_mode *adjusted_mode =
13657 &crtc_state->base.adjusted_mode;
13659 drm_calc_timestamping_constants(&crtc->base, adjusted_mode);
13662 * The scanline counter increments at the leading edge of hsync.
13664 * On most platforms it starts counting from vtotal-1 on the
13665 * first active line. That means the scanline counter value is
13666 * always one less than what we would expect. Ie. just after
13667 * start of vblank, which also occurs at start of hsync (on the
13668 * last active line), the scanline counter will read vblank_start-1.
13670 * On gen2 the scanline counter starts counting from 1 instead
13671 * of vtotal-1, so we have to subtract one (or rather add vtotal-1
13672 * to keep the value positive), instead of adding one.
13674 * On HSW+ the behaviour of the scanline counter depends on the output
13675 * type. For DP ports it behaves like most other platforms, but on HDMI
13676 * there's an extra 1 line difference. So we need to add two instead of
13677 * one to the value.
13679 * On VLV/CHV DSI the scanline counter would appear to increment
13680 * approx. 1/3 of a scanline before start of vblank. Unfortunately
13681 * that means we can't tell whether we're in vblank or not while
13682 * we're on that particular line. We must still set scanline_offset
13683 * to 1 so that the vblank timestamps come out correct when we query
13684 * the scanline counter from within the vblank interrupt handler.
13685 * However if queried just before the start of vblank we'll get an
13686 * answer that's slightly in the future.
13688 if (IS_GEN(dev_priv, 2)) {
13691 vtotal = adjusted_mode->crtc_vtotal;
13692 if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE)
13695 crtc->scanline_offset = vtotal - 1;
13696 } else if (HAS_DDI(dev_priv) &&
13697 intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
13698 crtc->scanline_offset = 2;
13700 crtc->scanline_offset = 1;
13704 static void intel_modeset_clear_plls(struct intel_atomic_state *state)
13706 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
13707 struct intel_crtc_state *new_crtc_state;
13708 struct intel_crtc *crtc;
13711 if (!dev_priv->display.crtc_compute_clock)
13714 for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
13715 if (!needs_modeset(new_crtc_state))
13718 intel_release_shared_dplls(state, crtc);
13723 * This implements the workaround described in the "notes" section of the mode
13724 * set sequence documentation. When going from no pipes or single pipe to
13725 * multiple pipes, and planes are enabled after the pipe, we need to wait at
13726 * least 2 vblanks on the first pipe before enabling planes on the second pipe.
13728 static int haswell_mode_set_planes_workaround(struct intel_atomic_state *state)
13730 struct intel_crtc_state *crtc_state;
13731 struct intel_crtc *crtc;
13732 struct intel_crtc_state *first_crtc_state = NULL;
13733 struct intel_crtc_state *other_crtc_state = NULL;
13734 enum pipe first_pipe = INVALID_PIPE, enabled_pipe = INVALID_PIPE;
13737 /* look at all crtc's that are going to be enabled in during modeset */
13738 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
13739 if (!crtc_state->base.active ||
13740 !needs_modeset(crtc_state))
13743 if (first_crtc_state) {
13744 other_crtc_state = crtc_state;
13747 first_crtc_state = crtc_state;
13748 first_pipe = crtc->pipe;
13752 /* No workaround needed? */
13753 if (!first_crtc_state)
13756 /* w/a possibly needed, check how many crtc's are already enabled. */
13757 for_each_intel_crtc(state->base.dev, crtc) {
13758 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
13759 if (IS_ERR(crtc_state))
13760 return PTR_ERR(crtc_state);
13762 crtc_state->hsw_workaround_pipe = INVALID_PIPE;
13764 if (!crtc_state->base.active ||
13765 needs_modeset(crtc_state))
13768 /* 2 or more enabled crtcs means no need for w/a */
13769 if (enabled_pipe != INVALID_PIPE)
13772 enabled_pipe = crtc->pipe;
13775 if (enabled_pipe != INVALID_PIPE)
13776 first_crtc_state->hsw_workaround_pipe = enabled_pipe;
13777 else if (other_crtc_state)
13778 other_crtc_state->hsw_workaround_pipe = first_pipe;
13783 static int intel_modeset_checks(struct intel_atomic_state *state)
13785 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
13786 struct intel_crtc_state *old_crtc_state, *new_crtc_state;
13787 struct intel_crtc *crtc;
13790 /* keep the current setting */
13791 if (!state->cdclk.force_min_cdclk_changed)
13792 state->cdclk.force_min_cdclk = dev_priv->cdclk.force_min_cdclk;
13794 state->modeset = true;
13795 state->active_pipes = dev_priv->active_pipes;
13796 state->cdclk.logical = dev_priv->cdclk.logical;
13797 state->cdclk.actual = dev_priv->cdclk.actual;
13799 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
13800 new_crtc_state, i) {
13801 if (new_crtc_state->base.active)
13802 state->active_pipes |= BIT(crtc->pipe);
13804 state->active_pipes &= ~BIT(crtc->pipe);
13806 if (old_crtc_state->base.active != new_crtc_state->base.active)
13807 state->active_pipe_changes |= BIT(crtc->pipe);
13810 if (state->active_pipe_changes) {
13811 ret = intel_atomic_lock_global_state(state);
13816 ret = intel_modeset_calc_cdclk(state);
13820 intel_modeset_clear_plls(state);
13822 if (IS_HASWELL(dev_priv))
13823 return haswell_mode_set_planes_workaround(state);
13829 * Handle calculation of various watermark data at the end of the atomic check
13830 * phase. The code here should be run after the per-crtc and per-plane 'check'
13831 * handlers to ensure that all derived state has been updated.
13833 static int calc_watermark_data(struct intel_atomic_state *state)
13835 struct drm_device *dev = state->base.dev;
13836 struct drm_i915_private *dev_priv = to_i915(dev);
13838 /* Is there platform-specific watermark information to calculate? */
13839 if (dev_priv->display.compute_global_watermarks)
13840 return dev_priv->display.compute_global_watermarks(state);
13845 static void intel_crtc_check_fastset(const struct intel_crtc_state *old_crtc_state,
13846 struct intel_crtc_state *new_crtc_state)
13848 if (!intel_pipe_config_compare(old_crtc_state, new_crtc_state, true))
13851 new_crtc_state->base.mode_changed = false;
13852 new_crtc_state->update_pipe = true;
13855 * If we're not doing the full modeset we want to
13856 * keep the current M/N values as they may be
13857 * sufficiently different to the computed values
13858 * to cause problems.
13860 * FIXME: should really copy more fuzzy state here
13862 new_crtc_state->fdi_m_n = old_crtc_state->fdi_m_n;
13863 new_crtc_state->dp_m_n = old_crtc_state->dp_m_n;
13864 new_crtc_state->dp_m2_n2 = old_crtc_state->dp_m2_n2;
13865 new_crtc_state->has_drrs = old_crtc_state->has_drrs;
13868 static int intel_crtc_add_planes_to_state(struct intel_atomic_state *state,
13869 struct intel_crtc *crtc,
13872 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
13873 struct intel_plane *plane;
13875 for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
13876 struct intel_plane_state *plane_state;
13878 if ((plane_ids_mask & BIT(plane->id)) == 0)
13881 plane_state = intel_atomic_get_plane_state(state, plane);
13882 if (IS_ERR(plane_state))
13883 return PTR_ERR(plane_state);
13889 static bool active_planes_affects_min_cdclk(struct drm_i915_private *dev_priv)
13891 /* See {hsw,vlv,ivb}_plane_ratio() */
13892 return IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv) ||
13893 IS_CHERRYVIEW(dev_priv) || IS_VALLEYVIEW(dev_priv) ||
13894 IS_IVYBRIDGE(dev_priv);
13897 static int intel_atomic_check_planes(struct intel_atomic_state *state,
13898 bool *need_modeset)
13900 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
13901 struct intel_crtc_state *old_crtc_state, *new_crtc_state;
13902 struct intel_plane_state *plane_state;
13903 struct intel_plane *plane;
13904 struct intel_crtc *crtc;
13907 ret = icl_add_linked_planes(state);
13911 for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
13912 ret = intel_plane_atomic_check(state, plane);
13914 DRM_DEBUG_ATOMIC("[PLANE:%d:%s] atomic driver check failed\n",
13915 plane->base.base.id, plane->base.name);
13920 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
13921 new_crtc_state, i) {
13922 u8 old_active_planes, new_active_planes;
13924 ret = icl_check_nv12_planes(new_crtc_state);
13929 * On some platforms the number of active planes affects
13930 * the planes' minimum cdclk calculation. Add such planes
13931 * to the state before we compute the minimum cdclk.
13933 if (!active_planes_affects_min_cdclk(dev_priv))
13936 old_active_planes = old_crtc_state->active_planes & ~BIT(PLANE_CURSOR);
13937 new_active_planes = new_crtc_state->active_planes & ~BIT(PLANE_CURSOR);
13939 if (hweight8(old_active_planes) == hweight8(new_active_planes))
13942 ret = intel_crtc_add_planes_to_state(state, crtc, new_active_planes);
13948 * active_planes bitmask has been updated, and potentially
13949 * affected planes are part of the state. We can now
13950 * compute the minimum cdclk for each plane.
13952 for_each_new_intel_plane_in_state(state, plane, plane_state, i)
13953 *need_modeset |= intel_plane_calc_min_cdclk(state, plane);
13958 static int intel_atomic_check_crtcs(struct intel_atomic_state *state)
13960 struct intel_crtc_state *crtc_state;
13961 struct intel_crtc *crtc;
13964 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
13965 int ret = intel_crtc_atomic_check(state, crtc);
13967 DRM_DEBUG_ATOMIC("[CRTC:%d:%s] atomic driver check failed\n",
13968 crtc->base.base.id, crtc->base.name);
13977 * intel_atomic_check - validate state object
13979 * @_state: state to validate
13981 static int intel_atomic_check(struct drm_device *dev,
13982 struct drm_atomic_state *_state)
13984 struct drm_i915_private *dev_priv = to_i915(dev);
13985 struct intel_atomic_state *state = to_intel_atomic_state(_state);
13986 struct intel_crtc_state *old_crtc_state, *new_crtc_state;
13987 struct intel_crtc *crtc;
13989 bool any_ms = false;
13991 /* Catch I915_MODE_FLAG_INHERITED */
13992 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
13993 new_crtc_state, i) {
13994 if (new_crtc_state->base.mode.private_flags !=
13995 old_crtc_state->base.mode.private_flags)
13996 new_crtc_state->base.mode_changed = true;
13999 ret = drm_atomic_helper_check_modeset(dev, &state->base);
14003 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
14004 new_crtc_state, i) {
14005 if (!needs_modeset(new_crtc_state))
14008 if (!new_crtc_state->base.enable) {
14013 ret = intel_modeset_pipe_config(new_crtc_state);
14017 intel_crtc_check_fastset(old_crtc_state, new_crtc_state);
14019 if (needs_modeset(new_crtc_state))
14023 if (any_ms && !check_digital_port_conflicts(state)) {
14024 DRM_DEBUG_KMS("rejecting conflicting digital port configuration\n");
14029 ret = drm_dp_mst_atomic_check(&state->base);
14033 any_ms |= state->cdclk.force_min_cdclk_changed;
14035 ret = intel_atomic_check_planes(state, &any_ms);
14040 ret = intel_modeset_checks(state);
14044 state->cdclk.logical = dev_priv->cdclk.logical;
14047 ret = intel_atomic_check_crtcs(state);
14051 intel_fbc_choose_crtc(dev_priv, state);
14052 ret = calc_watermark_data(state);
14056 ret = intel_bw_atomic_check(state);
14060 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
14061 new_crtc_state, i) {
14062 if (!needs_modeset(new_crtc_state) &&
14063 !new_crtc_state->update_pipe)
14066 intel_dump_pipe_config(new_crtc_state, state,
14067 needs_modeset(new_crtc_state) ?
14068 "[modeset]" : "[fastset]");
14074 if (ret == -EDEADLK)
14078 * FIXME would probably be nice to know which crtc specifically
14079 * caused the failure, in cases where we can pinpoint it.
14081 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
14083 intel_dump_pipe_config(new_crtc_state, state, "[failed]");
14088 static int intel_atomic_prepare_commit(struct intel_atomic_state *state)
14090 return drm_atomic_helper_prepare_planes(state->base.dev,
14094 u32 intel_crtc_get_vblank_counter(struct intel_crtc *crtc)
14096 struct drm_device *dev = crtc->base.dev;
14097 struct drm_vblank_crtc *vblank = &dev->vblank[drm_crtc_index(&crtc->base)];
14099 if (!vblank->max_vblank_count)
14100 return (u32)drm_crtc_accurate_vblank_count(&crtc->base);
14102 return crtc->base.funcs->get_vblank_counter(&crtc->base);
14105 void intel_crtc_arm_fifo_underrun(struct intel_crtc *crtc,
14106 struct intel_crtc_state *crtc_state)
14108 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
14110 if (!IS_GEN(dev_priv, 2))
14111 intel_set_cpu_fifo_underrun_reporting(dev_priv, crtc->pipe, true);
14113 if (crtc_state->has_pch_encoder) {
14114 enum pipe pch_transcoder =
14115 intel_crtc_pch_transcoder(crtc);
14117 intel_set_pch_fifo_underrun_reporting(dev_priv, pch_transcoder, true);
14121 static void intel_pipe_fastset(const struct intel_crtc_state *old_crtc_state,
14122 const struct intel_crtc_state *new_crtc_state)
14124 struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->base.crtc);
14125 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
14127 /* drm_atomic_helper_update_legacy_modeset_state might not be called. */
14128 crtc->base.mode = new_crtc_state->base.mode;
14131 * Update pipe size and adjust fitter if needed: the reason for this is
14132 * that in compute_mode_changes we check the native mode (not the pfit
14133 * mode) to see if we can flip rather than do a full mode set. In the
14134 * fastboot case, we'll flip, but if we don't update the pipesrc and
14135 * pfit state, we'll end up with a big fb scanned out into the wrong
14138 intel_set_pipe_src_size(new_crtc_state);
14140 /* on skylake this is done by detaching scalers */
14141 if (INTEL_GEN(dev_priv) >= 9) {
14142 skl_detach_scalers(new_crtc_state);
14144 if (new_crtc_state->pch_pfit.enabled)
14145 skylake_pfit_enable(new_crtc_state);
14146 } else if (HAS_PCH_SPLIT(dev_priv)) {
14147 if (new_crtc_state->pch_pfit.enabled)
14148 ironlake_pfit_enable(new_crtc_state);
14149 else if (old_crtc_state->pch_pfit.enabled)
14150 ironlake_pfit_disable(old_crtc_state);
14153 if (INTEL_GEN(dev_priv) >= 11)
14154 icl_set_pipe_chicken(crtc);
14157 static void commit_pipe_config(struct intel_atomic_state *state,
14158 struct intel_crtc_state *old_crtc_state,
14159 struct intel_crtc_state *new_crtc_state)
14161 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
14162 bool modeset = needs_modeset(new_crtc_state);
14165 * During modesets pipe configuration was programmed as the
14166 * CRTC was enabled.
14169 if (new_crtc_state->base.color_mgmt_changed ||
14170 new_crtc_state->update_pipe)
14171 intel_color_commit(new_crtc_state);
14173 if (INTEL_GEN(dev_priv) >= 9)
14174 skl_detach_scalers(new_crtc_state);
14176 if (INTEL_GEN(dev_priv) >= 9 || IS_BROADWELL(dev_priv))
14177 bdw_set_pipemisc(new_crtc_state);
14179 if (new_crtc_state->update_pipe)
14180 intel_pipe_fastset(old_crtc_state, new_crtc_state);
14183 if (dev_priv->display.atomic_update_watermarks)
14184 dev_priv->display.atomic_update_watermarks(state,
14188 static void intel_update_crtc(struct intel_crtc *crtc,
14189 struct intel_atomic_state *state,
14190 struct intel_crtc_state *old_crtc_state,
14191 struct intel_crtc_state *new_crtc_state)
14193 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
14194 bool modeset = needs_modeset(new_crtc_state);
14195 struct intel_plane_state *new_plane_state =
14196 intel_atomic_get_new_plane_state(state,
14197 to_intel_plane(crtc->base.primary));
14200 intel_crtc_update_active_timings(new_crtc_state);
14202 dev_priv->display.crtc_enable(new_crtc_state, state);
14204 /* vblanks work again, re-enable pipe CRC. */
14205 intel_crtc_enable_pipe_crc(crtc);
14207 intel_pre_plane_update(old_crtc_state, new_crtc_state);
14209 if (new_crtc_state->update_pipe)
14210 intel_encoders_update_pipe(crtc, new_crtc_state, state);
14213 if (new_crtc_state->update_pipe && !new_crtc_state->enable_fbc)
14214 intel_fbc_disable(crtc);
14215 else if (new_plane_state)
14216 intel_fbc_enable(crtc, new_crtc_state, new_plane_state);
14218 /* Perform vblank evasion around commit operation */
14219 intel_pipe_update_start(new_crtc_state);
14221 commit_pipe_config(state, old_crtc_state, new_crtc_state);
14223 if (INTEL_GEN(dev_priv) >= 9)
14224 skl_update_planes_on_crtc(state, crtc);
14226 i9xx_update_planes_on_crtc(state, crtc);
14228 intel_pipe_update_end(new_crtc_state);
14231 * We usually enable FIFO underrun interrupts as part of the
14232 * CRTC enable sequence during modesets. But when we inherit a
14233 * valid pipe configuration from the BIOS we need to take care
14234 * of enabling them on the CRTC's first fastset.
14236 if (new_crtc_state->update_pipe && !modeset &&
14237 old_crtc_state->base.mode.private_flags & I915_MODE_FLAG_INHERITED)
14238 intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
14241 static struct intel_crtc *intel_get_slave_crtc(const struct intel_crtc_state *new_crtc_state)
14243 struct drm_i915_private *dev_priv = to_i915(new_crtc_state->base.crtc->dev);
14244 enum transcoder slave_transcoder;
14246 WARN_ON(!is_power_of_2(new_crtc_state->sync_mode_slaves_mask));
14248 slave_transcoder = ffs(new_crtc_state->sync_mode_slaves_mask) - 1;
14249 return intel_get_crtc_for_pipe(dev_priv,
14250 (enum pipe)slave_transcoder);
14253 static void intel_old_crtc_state_disables(struct intel_atomic_state *state,
14254 struct intel_crtc_state *old_crtc_state,
14255 struct intel_crtc_state *new_crtc_state,
14256 struct intel_crtc *crtc)
14258 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
14260 intel_crtc_disable_planes(state, crtc);
14263 * We need to disable pipe CRC before disabling the pipe,
14264 * or we race against vblank off.
14266 intel_crtc_disable_pipe_crc(crtc);
14268 dev_priv->display.crtc_disable(old_crtc_state, state);
14269 crtc->active = false;
14270 intel_fbc_disable(crtc);
14271 intel_disable_shared_dpll(old_crtc_state);
14274 * Underruns don't always raise interrupts,
14275 * so check manually.
14277 intel_check_cpu_fifo_underruns(dev_priv);
14278 intel_check_pch_fifo_underruns(dev_priv);
14280 /* FIXME unify this for all platforms */
14281 if (!new_crtc_state->base.active &&
14282 !HAS_GMCH(dev_priv) &&
14283 dev_priv->display.initial_watermarks)
14284 dev_priv->display.initial_watermarks(state,
14288 static void intel_trans_port_sync_modeset_disables(struct intel_atomic_state *state,
14289 struct intel_crtc *crtc,
14290 struct intel_crtc_state *old_crtc_state,
14291 struct intel_crtc_state *new_crtc_state)
14293 struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
14294 struct intel_crtc_state *new_slave_crtc_state =
14295 intel_atomic_get_new_crtc_state(state, slave_crtc);
14296 struct intel_crtc_state *old_slave_crtc_state =
14297 intel_atomic_get_old_crtc_state(state, slave_crtc);
14299 WARN_ON(!slave_crtc || !new_slave_crtc_state ||
14300 !old_slave_crtc_state);
14302 /* Disable Slave first */
14303 intel_pre_plane_update(old_slave_crtc_state, new_slave_crtc_state);
14304 if (old_slave_crtc_state->base.active)
14305 intel_old_crtc_state_disables(state,
14306 old_slave_crtc_state,
14307 new_slave_crtc_state,
14310 /* Disable Master */
14311 intel_pre_plane_update(old_crtc_state, new_crtc_state);
14312 if (old_crtc_state->base.active)
14313 intel_old_crtc_state_disables(state,
14319 static void intel_commit_modeset_disables(struct intel_atomic_state *state)
14321 struct intel_crtc_state *new_crtc_state, *old_crtc_state;
14322 struct intel_crtc *crtc;
14326 * Disable CRTC/pipes in reverse order because some features(MST in
14327 * TGL+) requires master and slave relationship between pipes, so it
14328 * should always pick the lowest pipe as master as it will be enabled
14329 * first and disable in the reverse order so the master will be the
14330 * last one to be disabled.
14332 for_each_oldnew_intel_crtc_in_state_reverse(state, crtc, old_crtc_state,
14333 new_crtc_state, i) {
14334 if (!needs_modeset(new_crtc_state))
14337 /* In case of Transcoder port Sync master slave CRTCs can be
14338 * assigned in any order and we need to make sure that
14339 * slave CRTCs are disabled first and then master CRTC since
14340 * Slave vblanks are masked till Master Vblanks.
14342 if (is_trans_port_sync_mode(new_crtc_state)) {
14343 if (is_trans_port_sync_master(new_crtc_state))
14344 intel_trans_port_sync_modeset_disables(state,
14351 intel_pre_plane_update(old_crtc_state, new_crtc_state);
14353 if (old_crtc_state->base.active)
14354 intel_old_crtc_state_disables(state,
14362 static void intel_commit_modeset_enables(struct intel_atomic_state *state)
14364 struct intel_crtc *crtc;
14365 struct intel_crtc_state *old_crtc_state, *new_crtc_state;
14368 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
14369 if (!new_crtc_state->base.active)
14372 intel_update_crtc(crtc, state, old_crtc_state,
14377 static void intel_crtc_enable_trans_port_sync(struct intel_crtc *crtc,
14378 struct intel_atomic_state *state,
14379 struct intel_crtc_state *new_crtc_state)
14381 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
14383 intel_crtc_update_active_timings(new_crtc_state);
14384 dev_priv->display.crtc_enable(new_crtc_state, state);
14385 intel_crtc_enable_pipe_crc(crtc);
14388 static void intel_set_dp_tp_ctl_normal(struct intel_crtc *crtc,
14389 struct intel_atomic_state *state)
14391 struct drm_connector *uninitialized_var(conn);
14392 struct drm_connector_state *conn_state;
14393 struct intel_dp *intel_dp;
14396 for_each_new_connector_in_state(&state->base, conn, conn_state, i) {
14397 if (conn_state->crtc == &crtc->base)
14400 intel_dp = enc_to_intel_dp(&intel_attached_encoder(conn)->base);
14401 intel_dp_stop_link_train(intel_dp);
14404 static void intel_post_crtc_enable_updates(struct intel_crtc *crtc,
14405 struct intel_atomic_state *state)
14407 struct intel_crtc_state *new_crtc_state =
14408 intel_atomic_get_new_crtc_state(state, crtc);
14409 struct intel_crtc_state *old_crtc_state =
14410 intel_atomic_get_old_crtc_state(state, crtc);
14411 struct intel_plane_state *new_plane_state =
14412 intel_atomic_get_new_plane_state(state,
14413 to_intel_plane(crtc->base.primary));
14414 bool modeset = needs_modeset(new_crtc_state);
14416 if (new_crtc_state->update_pipe && !new_crtc_state->enable_fbc)
14417 intel_fbc_disable(crtc);
14418 else if (new_plane_state)
14419 intel_fbc_enable(crtc, new_crtc_state, new_plane_state);
14421 /* Perform vblank evasion around commit operation */
14422 intel_pipe_update_start(new_crtc_state);
14423 commit_pipe_config(state, old_crtc_state, new_crtc_state);
14424 skl_update_planes_on_crtc(state, crtc);
14425 intel_pipe_update_end(new_crtc_state);
14428 * We usually enable FIFO underrun interrupts as part of the
14429 * CRTC enable sequence during modesets. But when we inherit a
14430 * valid pipe configuration from the BIOS we need to take care
14431 * of enabling them on the CRTC's first fastset.
14433 if (new_crtc_state->update_pipe && !modeset &&
14434 old_crtc_state->base.mode.private_flags & I915_MODE_FLAG_INHERITED)
14435 intel_crtc_arm_fifo_underrun(crtc, new_crtc_state);
14438 static void intel_update_trans_port_sync_crtcs(struct intel_crtc *crtc,
14439 struct intel_atomic_state *state,
14440 struct intel_crtc_state *old_crtc_state,
14441 struct intel_crtc_state *new_crtc_state)
14443 struct intel_crtc *slave_crtc = intel_get_slave_crtc(new_crtc_state);
14444 struct intel_crtc_state *new_slave_crtc_state =
14445 intel_atomic_get_new_crtc_state(state, slave_crtc);
14446 struct intel_crtc_state *old_slave_crtc_state =
14447 intel_atomic_get_old_crtc_state(state, slave_crtc);
14449 WARN_ON(!slave_crtc || !new_slave_crtc_state ||
14450 !old_slave_crtc_state);
14452 DRM_DEBUG_KMS("Updating Transcoder Port Sync Master CRTC = %d %s and Slave CRTC %d %s\n",
14453 crtc->base.base.id, crtc->base.name, slave_crtc->base.base.id,
14454 slave_crtc->base.name);
14456 /* Enable seq for slave with with DP_TP_CTL left Idle until the
14459 intel_crtc_enable_trans_port_sync(slave_crtc,
14461 new_slave_crtc_state);
14463 /* Enable seq for master with with DP_TP_CTL left Idle */
14464 intel_crtc_enable_trans_port_sync(crtc,
14468 /* Set Slave's DP_TP_CTL to Normal */
14469 intel_set_dp_tp_ctl_normal(slave_crtc,
14472 /* Set Master's DP_TP_CTL To Normal */
14473 usleep_range(200, 400);
14474 intel_set_dp_tp_ctl_normal(crtc,
14477 /* Now do the post crtc enable for all master and slaves */
14478 intel_post_crtc_enable_updates(slave_crtc,
14480 intel_post_crtc_enable_updates(crtc,
14484 static void skl_commit_modeset_enables(struct intel_atomic_state *state)
14486 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
14487 struct intel_crtc *crtc;
14488 struct intel_crtc_state *old_crtc_state, *new_crtc_state;
14489 unsigned int updated = 0;
14492 u8 hw_enabled_slices = dev_priv->wm.skl_hw.ddb.enabled_slices;
14493 u8 required_slices = state->wm_results.ddb.enabled_slices;
14494 struct skl_ddb_entry entries[I915_MAX_PIPES] = {};
14496 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i)
14497 /* ignore allocations for crtc's that have been turned off. */
14498 if (new_crtc_state->base.active)
14499 entries[i] = old_crtc_state->wm.skl.ddb;
14501 /* If 2nd DBuf slice required, enable it here */
14502 if (INTEL_GEN(dev_priv) >= 11 && required_slices > hw_enabled_slices)
14503 icl_dbuf_slices_update(dev_priv, required_slices);
14506 * Whenever the number of active pipes changes, we need to make sure we
14507 * update the pipes in the right order so that their ddb allocations
14508 * never overlap with eachother inbetween CRTC updates. Otherwise we'll
14509 * cause pipe underruns and other bad stuff.
14514 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
14515 enum pipe pipe = crtc->pipe;
14516 bool vbl_wait = false;
14517 bool modeset = needs_modeset(new_crtc_state);
14519 if (updated & BIT(crtc->pipe) || !new_crtc_state->base.active)
14522 if (skl_ddb_allocation_overlaps(&new_crtc_state->wm.skl.ddb,
14524 INTEL_NUM_PIPES(dev_priv), i))
14527 updated |= BIT(pipe);
14528 entries[i] = new_crtc_state->wm.skl.ddb;
14531 * If this is an already active pipe, it's DDB changed,
14532 * and this isn't the last pipe that needs updating
14533 * then we need to wait for a vblank to pass for the
14534 * new ddb allocation to take effect.
14536 if (!skl_ddb_entry_equal(&new_crtc_state->wm.skl.ddb,
14537 &old_crtc_state->wm.skl.ddb) &&
14539 state->wm_results.dirty_pipes != updated)
14542 if (modeset && is_trans_port_sync_mode(new_crtc_state)) {
14543 if (is_trans_port_sync_master(new_crtc_state))
14544 intel_update_trans_port_sync_crtcs(crtc,
14551 intel_update_crtc(crtc, state, old_crtc_state,
14556 intel_wait_for_vblank(dev_priv, pipe);
14560 } while (progress);
14562 /* If 2nd DBuf slice is no more required disable it */
14563 if (INTEL_GEN(dev_priv) >= 11 && required_slices < hw_enabled_slices)
14564 icl_dbuf_slices_update(dev_priv, required_slices);
14567 static void intel_atomic_helper_free_state(struct drm_i915_private *dev_priv)
14569 struct intel_atomic_state *state, *next;
14570 struct llist_node *freed;
14572 freed = llist_del_all(&dev_priv->atomic_helper.free_list);
14573 llist_for_each_entry_safe(state, next, freed, freed)
14574 drm_atomic_state_put(&state->base);
14577 static void intel_atomic_helper_free_state_worker(struct work_struct *work)
14579 struct drm_i915_private *dev_priv =
14580 container_of(work, typeof(*dev_priv), atomic_helper.free_work);
14582 intel_atomic_helper_free_state(dev_priv);
14585 static void intel_atomic_commit_fence_wait(struct intel_atomic_state *intel_state)
14587 struct wait_queue_entry wait_fence, wait_reset;
14588 struct drm_i915_private *dev_priv = to_i915(intel_state->base.dev);
14590 init_wait_entry(&wait_fence, 0);
14591 init_wait_entry(&wait_reset, 0);
14593 prepare_to_wait(&intel_state->commit_ready.wait,
14594 &wait_fence, TASK_UNINTERRUPTIBLE);
14595 prepare_to_wait(bit_waitqueue(&dev_priv->gt.reset.flags,
14596 I915_RESET_MODESET),
14597 &wait_reset, TASK_UNINTERRUPTIBLE);
14600 if (i915_sw_fence_done(&intel_state->commit_ready) ||
14601 test_bit(I915_RESET_MODESET, &dev_priv->gt.reset.flags))
14606 finish_wait(&intel_state->commit_ready.wait, &wait_fence);
14607 finish_wait(bit_waitqueue(&dev_priv->gt.reset.flags,
14608 I915_RESET_MODESET),
14612 static void intel_atomic_cleanup_work(struct work_struct *work)
14614 struct drm_atomic_state *state =
14615 container_of(work, struct drm_atomic_state, commit_work);
14616 struct drm_i915_private *i915 = to_i915(state->dev);
14618 drm_atomic_helper_cleanup_planes(&i915->drm, state);
14619 drm_atomic_helper_commit_cleanup_done(state);
14620 drm_atomic_state_put(state);
14622 intel_atomic_helper_free_state(i915);
14625 static void intel_atomic_commit_tail(struct intel_atomic_state *state)
14627 struct drm_device *dev = state->base.dev;
14628 struct drm_i915_private *dev_priv = to_i915(dev);
14629 struct intel_crtc_state *new_crtc_state, *old_crtc_state;
14630 struct intel_crtc *crtc;
14631 u64 put_domains[I915_MAX_PIPES] = {};
14632 intel_wakeref_t wakeref = 0;
14635 intel_atomic_commit_fence_wait(state);
14637 drm_atomic_helper_wait_for_dependencies(&state->base);
14639 if (state->modeset)
14640 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_MODESET);
14642 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state,
14643 new_crtc_state, i) {
14644 if (needs_modeset(new_crtc_state) ||
14645 new_crtc_state->update_pipe) {
14647 put_domains[crtc->pipe] =
14648 modeset_get_crtc_power_domains(new_crtc_state);
14652 intel_commit_modeset_disables(state);
14654 /* FIXME: Eventually get rid of our crtc->config pointer */
14655 for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
14656 crtc->config = new_crtc_state;
14658 if (state->modeset) {
14659 drm_atomic_helper_update_legacy_modeset_state(dev, &state->base);
14661 intel_set_cdclk_pre_plane_update(dev_priv,
14662 &state->cdclk.actual,
14663 &dev_priv->cdclk.actual,
14664 state->cdclk.pipe);
14667 * SKL workaround: bspec recommends we disable the SAGV when we
14668 * have more then one pipe enabled
14670 if (!intel_can_enable_sagv(state))
14671 intel_disable_sagv(dev_priv);
14673 intel_modeset_verify_disabled(dev_priv, state);
14676 /* Complete the events for pipes that have now been disabled */
14677 for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
14678 bool modeset = needs_modeset(new_crtc_state);
14680 /* Complete events for now disable pipes here. */
14681 if (modeset && !new_crtc_state->base.active && new_crtc_state->base.event) {
14682 spin_lock_irq(&dev->event_lock);
14683 drm_crtc_send_vblank_event(&crtc->base, new_crtc_state->base.event);
14684 spin_unlock_irq(&dev->event_lock);
14686 new_crtc_state->base.event = NULL;
14690 if (state->modeset)
14691 intel_encoders_update_prepare(state);
14693 /* Now enable the clocks, plane, pipe, and connectors that we set up. */
14694 dev_priv->display.commit_modeset_enables(state);
14696 if (state->modeset) {
14697 intel_encoders_update_complete(state);
14699 intel_set_cdclk_post_plane_update(dev_priv,
14700 &state->cdclk.actual,
14701 &dev_priv->cdclk.actual,
14702 state->cdclk.pipe);
14705 /* FIXME: We should call drm_atomic_helper_commit_hw_done() here
14706 * already, but still need the state for the delayed optimization. To
14708 * - wrap the optimization/post_plane_update stuff into a per-crtc work.
14709 * - schedule that vblank worker _before_ calling hw_done
14710 * - at the start of commit_tail, cancel it _synchrously
14711 * - switch over to the vblank wait helper in the core after that since
14712 * we don't need out special handling any more.
14714 drm_atomic_helper_wait_for_flip_done(dev, &state->base);
14716 for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
14717 if (new_crtc_state->base.active &&
14718 !needs_modeset(new_crtc_state) &&
14719 (new_crtc_state->base.color_mgmt_changed ||
14720 new_crtc_state->update_pipe))
14721 intel_color_load_luts(new_crtc_state);
14725 * Now that the vblank has passed, we can go ahead and program the
14726 * optimal watermarks on platforms that need two-step watermark
14729 * TODO: Move this (and other cleanup) to an async worker eventually.
14731 for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i) {
14732 if (dev_priv->display.optimize_watermarks)
14733 dev_priv->display.optimize_watermarks(state,
14737 for_each_oldnew_intel_crtc_in_state(state, crtc, old_crtc_state, new_crtc_state, i) {
14738 intel_post_plane_update(old_crtc_state);
14740 if (put_domains[i])
14741 modeset_put_power_domains(dev_priv, put_domains[i]);
14743 intel_modeset_verify_crtc(crtc, state, old_crtc_state, new_crtc_state);
14746 if (state->modeset)
14747 intel_verify_planes(state);
14749 if (state->modeset && intel_can_enable_sagv(state))
14750 intel_enable_sagv(dev_priv);
14752 drm_atomic_helper_commit_hw_done(&state->base);
14754 if (state->modeset) {
14755 /* As one of the primary mmio accessors, KMS has a high
14756 * likelihood of triggering bugs in unclaimed access. After we
14757 * finish modesetting, see if an error has been flagged, and if
14758 * so enable debugging for the next modeset - and hope we catch
14761 intel_uncore_arm_unclaimed_mmio_detection(&dev_priv->uncore);
14762 intel_display_power_put(dev_priv, POWER_DOMAIN_MODESET, wakeref);
14764 intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref);
14767 * Defer the cleanup of the old state to a separate worker to not
14768 * impede the current task (userspace for blocking modesets) that
14769 * are executed inline. For out-of-line asynchronous modesets/flips,
14770 * deferring to a new worker seems overkill, but we would place a
14771 * schedule point (cond_resched()) here anyway to keep latencies
14774 INIT_WORK(&state->base.commit_work, intel_atomic_cleanup_work);
14775 queue_work(system_highpri_wq, &state->base.commit_work);
14778 static void intel_atomic_commit_work(struct work_struct *work)
14780 struct intel_atomic_state *state =
14781 container_of(work, struct intel_atomic_state, base.commit_work);
14783 intel_atomic_commit_tail(state);
14786 static int __i915_sw_fence_call
14787 intel_atomic_commit_ready(struct i915_sw_fence *fence,
14788 enum i915_sw_fence_notify notify)
14790 struct intel_atomic_state *state =
14791 container_of(fence, struct intel_atomic_state, commit_ready);
14794 case FENCE_COMPLETE:
14795 /* we do blocking waits in the worker, nothing to do here */
14799 struct intel_atomic_helper *helper =
14800 &to_i915(state->base.dev)->atomic_helper;
14802 if (llist_add(&state->freed, &helper->free_list))
14803 schedule_work(&helper->free_work);
14808 return NOTIFY_DONE;
14811 static void intel_atomic_track_fbs(struct intel_atomic_state *state)
14813 struct intel_plane_state *old_plane_state, *new_plane_state;
14814 struct intel_plane *plane;
14817 for_each_oldnew_intel_plane_in_state(state, plane, old_plane_state,
14818 new_plane_state, i)
14819 intel_frontbuffer_track(to_intel_frontbuffer(old_plane_state->base.fb),
14820 to_intel_frontbuffer(new_plane_state->base.fb),
14821 plane->frontbuffer_bit);
14824 static void assert_global_state_locked(struct drm_i915_private *dev_priv)
14826 struct intel_crtc *crtc;
14828 for_each_intel_crtc(&dev_priv->drm, crtc)
14829 drm_modeset_lock_assert_held(&crtc->base.mutex);
14832 static int intel_atomic_commit(struct drm_device *dev,
14833 struct drm_atomic_state *_state,
14836 struct intel_atomic_state *state = to_intel_atomic_state(_state);
14837 struct drm_i915_private *dev_priv = to_i915(dev);
14840 state->wakeref = intel_runtime_pm_get(&dev_priv->runtime_pm);
14842 drm_atomic_state_get(&state->base);
14843 i915_sw_fence_init(&state->commit_ready,
14844 intel_atomic_commit_ready);
14847 * The intel_legacy_cursor_update() fast path takes care
14848 * of avoiding the vblank waits for simple cursor
14849 * movement and flips. For cursor on/off and size changes,
14850 * we want to perform the vblank waits so that watermark
14851 * updates happen during the correct frames. Gen9+ have
14852 * double buffered watermarks and so shouldn't need this.
14854 * Unset state->legacy_cursor_update before the call to
14855 * drm_atomic_helper_setup_commit() because otherwise
14856 * drm_atomic_helper_wait_for_flip_done() is a noop and
14857 * we get FIFO underruns because we didn't wait
14860 * FIXME doing watermarks and fb cleanup from a vblank worker
14861 * (assuming we had any) would solve these problems.
14863 if (INTEL_GEN(dev_priv) < 9 && state->base.legacy_cursor_update) {
14864 struct intel_crtc_state *new_crtc_state;
14865 struct intel_crtc *crtc;
14868 for_each_new_intel_crtc_in_state(state, crtc, new_crtc_state, i)
14869 if (new_crtc_state->wm.need_postvbl_update ||
14870 new_crtc_state->update_wm_post)
14871 state->base.legacy_cursor_update = false;
14874 ret = intel_atomic_prepare_commit(state);
14876 DRM_DEBUG_ATOMIC("Preparing state failed with %i\n", ret);
14877 i915_sw_fence_commit(&state->commit_ready);
14878 intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref);
14882 ret = drm_atomic_helper_setup_commit(&state->base, nonblock);
14884 ret = drm_atomic_helper_swap_state(&state->base, true);
14887 i915_sw_fence_commit(&state->commit_ready);
14889 drm_atomic_helper_cleanup_planes(dev, &state->base);
14890 intel_runtime_pm_put(&dev_priv->runtime_pm, state->wakeref);
14893 dev_priv->wm.distrust_bios_wm = false;
14894 intel_shared_dpll_swap_state(state);
14895 intel_atomic_track_fbs(state);
14897 if (state->global_state_changed) {
14898 assert_global_state_locked(dev_priv);
14900 memcpy(dev_priv->min_cdclk, state->min_cdclk,
14901 sizeof(state->min_cdclk));
14902 memcpy(dev_priv->min_voltage_level, state->min_voltage_level,
14903 sizeof(state->min_voltage_level));
14904 dev_priv->active_pipes = state->active_pipes;
14905 dev_priv->cdclk.force_min_cdclk = state->cdclk.force_min_cdclk;
14907 intel_cdclk_swap_state(state);
14910 drm_atomic_state_get(&state->base);
14911 INIT_WORK(&state->base.commit_work, intel_atomic_commit_work);
14913 i915_sw_fence_commit(&state->commit_ready);
14914 if (nonblock && state->modeset) {
14915 queue_work(dev_priv->modeset_wq, &state->base.commit_work);
14916 } else if (nonblock) {
14917 queue_work(dev_priv->flip_wq, &state->base.commit_work);
14919 if (state->modeset)
14920 flush_workqueue(dev_priv->modeset_wq);
14921 intel_atomic_commit_tail(state);
14927 struct wait_rps_boost {
14928 struct wait_queue_entry wait;
14930 struct drm_crtc *crtc;
14931 struct i915_request *request;
14934 static int do_rps_boost(struct wait_queue_entry *_wait,
14935 unsigned mode, int sync, void *key)
14937 struct wait_rps_boost *wait = container_of(_wait, typeof(*wait), wait);
14938 struct i915_request *rq = wait->request;
14941 * If we missed the vblank, but the request is already running it
14942 * is reasonable to assume that it will complete before the next
14943 * vblank without our intervention, so leave RPS alone.
14945 if (!i915_request_started(rq))
14946 intel_rps_boost(rq);
14947 i915_request_put(rq);
14949 drm_crtc_vblank_put(wait->crtc);
14951 list_del(&wait->wait.entry);
14956 static void add_rps_boost_after_vblank(struct drm_crtc *crtc,
14957 struct dma_fence *fence)
14959 struct wait_rps_boost *wait;
14961 if (!dma_fence_is_i915(fence))
14964 if (INTEL_GEN(to_i915(crtc->dev)) < 6)
14967 if (drm_crtc_vblank_get(crtc))
14970 wait = kmalloc(sizeof(*wait), GFP_KERNEL);
14972 drm_crtc_vblank_put(crtc);
14976 wait->request = to_request(dma_fence_get(fence));
14979 wait->wait.func = do_rps_boost;
14980 wait->wait.flags = 0;
14982 add_wait_queue(drm_crtc_vblank_waitqueue(crtc), &wait->wait);
14985 static int intel_plane_pin_fb(struct intel_plane_state *plane_state)
14987 struct intel_plane *plane = to_intel_plane(plane_state->base.plane);
14988 struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
14989 struct drm_framebuffer *fb = plane_state->base.fb;
14990 struct i915_vma *vma;
14992 if (plane->id == PLANE_CURSOR &&
14993 INTEL_INFO(dev_priv)->display.cursor_needs_physical) {
14994 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
14995 const int align = intel_cursor_alignment(dev_priv);
14998 err = i915_gem_object_attach_phys(obj, align);
15003 vma = intel_pin_and_fence_fb_obj(fb,
15004 &plane_state->view,
15005 intel_plane_uses_fence(plane_state),
15006 &plane_state->flags);
15008 return PTR_ERR(vma);
15010 plane_state->vma = vma;
15015 static void intel_plane_unpin_fb(struct intel_plane_state *old_plane_state)
15017 struct i915_vma *vma;
15019 vma = fetch_and_zero(&old_plane_state->vma);
15021 intel_unpin_fb_vma(vma, old_plane_state->flags);
15024 static void fb_obj_bump_render_priority(struct drm_i915_gem_object *obj)
15026 struct i915_sched_attr attr = {
15027 .priority = I915_USER_PRIORITY(I915_PRIORITY_DISPLAY),
15030 i915_gem_object_wait_priority(obj, 0, &attr);
15034 * intel_prepare_plane_fb - Prepare fb for usage on plane
15035 * @plane: drm plane to prepare for
15036 * @_new_plane_state: the plane state being prepared
15038 * Prepares a framebuffer for usage on a display plane. Generally this
15039 * involves pinning the underlying object and updating the frontbuffer tracking
15040 * bits. Some older platforms need special physical address handling for
15043 * Returns 0 on success, negative error code on failure.
15046 intel_prepare_plane_fb(struct drm_plane *plane,
15047 struct drm_plane_state *_new_plane_state)
15049 struct intel_plane_state *new_plane_state =
15050 to_intel_plane_state(_new_plane_state);
15051 struct intel_atomic_state *intel_state =
15052 to_intel_atomic_state(new_plane_state->base.state);
15053 struct drm_i915_private *dev_priv = to_i915(plane->dev);
15054 struct drm_framebuffer *fb = new_plane_state->base.fb;
15055 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
15056 struct drm_i915_gem_object *old_obj = intel_fb_obj(plane->state->fb);
15060 struct intel_crtc_state *crtc_state =
15061 intel_atomic_get_new_crtc_state(intel_state,
15062 to_intel_crtc(plane->state->crtc));
15064 /* Big Hammer, we also need to ensure that any pending
15065 * MI_WAIT_FOR_EVENT inside a user batch buffer on the
15066 * current scanout is retired before unpinning the old
15067 * framebuffer. Note that we rely on userspace rendering
15068 * into the buffer attached to the pipe they are waiting
15069 * on. If not, userspace generates a GPU hang with IPEHR
15070 * point to the MI_WAIT_FOR_EVENT.
15072 * This should only fail upon a hung GPU, in which case we
15073 * can safely continue.
15075 if (needs_modeset(crtc_state)) {
15076 ret = i915_sw_fence_await_reservation(&intel_state->commit_ready,
15077 old_obj->base.resv, NULL,
15085 if (new_plane_state->base.fence) { /* explicit fencing */
15086 ret = i915_sw_fence_await_dma_fence(&intel_state->commit_ready,
15087 new_plane_state->base.fence,
15088 I915_FENCE_TIMEOUT,
15097 ret = i915_gem_object_pin_pages(obj);
15101 ret = intel_plane_pin_fb(new_plane_state);
15103 i915_gem_object_unpin_pages(obj);
15107 fb_obj_bump_render_priority(obj);
15108 intel_frontbuffer_flush(obj->frontbuffer, ORIGIN_DIRTYFB);
15110 if (!new_plane_state->base.fence) { /* implicit fencing */
15111 struct dma_fence *fence;
15113 ret = i915_sw_fence_await_reservation(&intel_state->commit_ready,
15114 obj->base.resv, NULL,
15115 false, I915_FENCE_TIMEOUT,
15120 fence = dma_resv_get_excl_rcu(obj->base.resv);
15122 add_rps_boost_after_vblank(new_plane_state->base.crtc,
15124 dma_fence_put(fence);
15127 add_rps_boost_after_vblank(new_plane_state->base.crtc,
15128 new_plane_state->base.fence);
15132 * We declare pageflips to be interactive and so merit a small bias
15133 * towards upclocking to deliver the frame on time. By only changing
15134 * the RPS thresholds to sample more regularly and aim for higher
15135 * clocks we can hopefully deliver low power workloads (like kodi)
15136 * that are not quite steady state without resorting to forcing
15137 * maximum clocks following a vblank miss (see do_rps_boost()).
15139 if (!intel_state->rps_interactive) {
15140 intel_rps_mark_interactive(&dev_priv->gt.rps, true);
15141 intel_state->rps_interactive = true;
15148 * intel_cleanup_plane_fb - Cleans up an fb after plane use
15149 * @plane: drm plane to clean up for
15150 * @_old_plane_state: the state from the previous modeset
15152 * Cleans up a framebuffer that has just been removed from a plane.
15155 intel_cleanup_plane_fb(struct drm_plane *plane,
15156 struct drm_plane_state *_old_plane_state)
15158 struct intel_plane_state *old_plane_state =
15159 to_intel_plane_state(_old_plane_state);
15160 struct intel_atomic_state *intel_state =
15161 to_intel_atomic_state(old_plane_state->base.state);
15162 struct drm_i915_private *dev_priv = to_i915(plane->dev);
15164 if (intel_state->rps_interactive) {
15165 intel_rps_mark_interactive(&dev_priv->gt.rps, false);
15166 intel_state->rps_interactive = false;
15169 /* Should only be called after a successful intel_prepare_plane_fb()! */
15170 intel_plane_unpin_fb(old_plane_state);
15174 * intel_plane_destroy - destroy a plane
15175 * @plane: plane to destroy
15177 * Common destruction function for all types of planes (primary, cursor,
15180 void intel_plane_destroy(struct drm_plane *plane)
15182 drm_plane_cleanup(plane);
15183 kfree(to_intel_plane(plane));
15186 static bool i8xx_plane_format_mod_supported(struct drm_plane *_plane,
15187 u32 format, u64 modifier)
15189 switch (modifier) {
15190 case DRM_FORMAT_MOD_LINEAR:
15191 case I915_FORMAT_MOD_X_TILED:
15198 case DRM_FORMAT_C8:
15199 case DRM_FORMAT_RGB565:
15200 case DRM_FORMAT_XRGB1555:
15201 case DRM_FORMAT_XRGB8888:
15202 return modifier == DRM_FORMAT_MOD_LINEAR ||
15203 modifier == I915_FORMAT_MOD_X_TILED;
15209 static bool i965_plane_format_mod_supported(struct drm_plane *_plane,
15210 u32 format, u64 modifier)
15212 switch (modifier) {
15213 case DRM_FORMAT_MOD_LINEAR:
15214 case I915_FORMAT_MOD_X_TILED:
15221 case DRM_FORMAT_C8:
15222 case DRM_FORMAT_RGB565:
15223 case DRM_FORMAT_XRGB8888:
15224 case DRM_FORMAT_XBGR8888:
15225 case DRM_FORMAT_XRGB2101010:
15226 case DRM_FORMAT_XBGR2101010:
15227 case DRM_FORMAT_XBGR16161616F:
15228 return modifier == DRM_FORMAT_MOD_LINEAR ||
15229 modifier == I915_FORMAT_MOD_X_TILED;
15235 static bool intel_cursor_format_mod_supported(struct drm_plane *_plane,
15236 u32 format, u64 modifier)
15238 return modifier == DRM_FORMAT_MOD_LINEAR &&
15239 format == DRM_FORMAT_ARGB8888;
15242 static const struct drm_plane_funcs i965_plane_funcs = {
15243 .update_plane = drm_atomic_helper_update_plane,
15244 .disable_plane = drm_atomic_helper_disable_plane,
15245 .destroy = intel_plane_destroy,
15246 .atomic_duplicate_state = intel_plane_duplicate_state,
15247 .atomic_destroy_state = intel_plane_destroy_state,
15248 .format_mod_supported = i965_plane_format_mod_supported,
15251 static const struct drm_plane_funcs i8xx_plane_funcs = {
15252 .update_plane = drm_atomic_helper_update_plane,
15253 .disable_plane = drm_atomic_helper_disable_plane,
15254 .destroy = intel_plane_destroy,
15255 .atomic_duplicate_state = intel_plane_duplicate_state,
15256 .atomic_destroy_state = intel_plane_destroy_state,
15257 .format_mod_supported = i8xx_plane_format_mod_supported,
15261 intel_legacy_cursor_update(struct drm_plane *_plane,
15262 struct drm_crtc *_crtc,
15263 struct drm_framebuffer *fb,
15264 int crtc_x, int crtc_y,
15265 unsigned int crtc_w, unsigned int crtc_h,
15266 u32 src_x, u32 src_y,
15267 u32 src_w, u32 src_h,
15268 struct drm_modeset_acquire_ctx *ctx)
15270 struct intel_plane *plane = to_intel_plane(_plane);
15271 struct intel_crtc *crtc = to_intel_crtc(_crtc);
15272 struct intel_plane_state *old_plane_state =
15273 to_intel_plane_state(plane->base.state);
15274 struct intel_plane_state *new_plane_state;
15275 struct intel_crtc_state *crtc_state =
15276 to_intel_crtc_state(crtc->base.state);
15277 struct intel_crtc_state *new_crtc_state;
15281 * When crtc is inactive or there is a modeset pending,
15282 * wait for it to complete in the slowpath
15284 if (!crtc_state->base.active || needs_modeset(crtc_state) ||
15285 crtc_state->update_pipe)
15289 * Don't do an async update if there is an outstanding commit modifying
15290 * the plane. This prevents our async update's changes from getting
15291 * overridden by a previous synchronous update's state.
15293 if (old_plane_state->base.commit &&
15294 !try_wait_for_completion(&old_plane_state->base.commit->hw_done))
15298 * If any parameters change that may affect watermarks,
15299 * take the slowpath. Only changing fb or position should be
15302 if (old_plane_state->base.crtc != &crtc->base ||
15303 old_plane_state->base.src_w != src_w ||
15304 old_plane_state->base.src_h != src_h ||
15305 old_plane_state->base.crtc_w != crtc_w ||
15306 old_plane_state->base.crtc_h != crtc_h ||
15307 !old_plane_state->base.fb != !fb)
15310 new_plane_state = to_intel_plane_state(intel_plane_duplicate_state(&plane->base));
15311 if (!new_plane_state)
15314 new_crtc_state = to_intel_crtc_state(intel_crtc_duplicate_state(&crtc->base));
15315 if (!new_crtc_state) {
15320 drm_atomic_set_fb_for_plane(&new_plane_state->base, fb);
15322 new_plane_state->base.src_x = src_x;
15323 new_plane_state->base.src_y = src_y;
15324 new_plane_state->base.src_w = src_w;
15325 new_plane_state->base.src_h = src_h;
15326 new_plane_state->base.crtc_x = crtc_x;
15327 new_plane_state->base.crtc_y = crtc_y;
15328 new_plane_state->base.crtc_w = crtc_w;
15329 new_plane_state->base.crtc_h = crtc_h;
15331 ret = intel_plane_atomic_check_with_state(crtc_state, new_crtc_state,
15332 old_plane_state, new_plane_state);
15336 ret = intel_plane_pin_fb(new_plane_state);
15340 intel_frontbuffer_flush(to_intel_frontbuffer(new_plane_state->base.fb), ORIGIN_FLIP);
15341 intel_frontbuffer_track(to_intel_frontbuffer(old_plane_state->base.fb),
15342 to_intel_frontbuffer(new_plane_state->base.fb),
15343 plane->frontbuffer_bit);
15345 /* Swap plane state */
15346 plane->base.state = &new_plane_state->base;
15349 * We cannot swap crtc_state as it may be in use by an atomic commit or
15350 * page flip that's running simultaneously. If we swap crtc_state and
15351 * destroy the old state, we will cause a use-after-free there.
15353 * Only update active_planes, which is needed for our internal
15354 * bookkeeping. Either value will do the right thing when updating
15355 * planes atomically. If the cursor was part of the atomic update then
15356 * we would have taken the slowpath.
15358 crtc_state->active_planes = new_crtc_state->active_planes;
15360 if (new_plane_state->base.visible)
15361 intel_update_plane(plane, crtc_state, new_plane_state);
15363 intel_disable_plane(plane, crtc_state);
15365 intel_plane_unpin_fb(old_plane_state);
15368 if (new_crtc_state)
15369 intel_crtc_destroy_state(&crtc->base, &new_crtc_state->base);
15371 intel_plane_destroy_state(&plane->base, &new_plane_state->base);
15373 intel_plane_destroy_state(&plane->base, &old_plane_state->base);
15377 return drm_atomic_helper_update_plane(&plane->base, &crtc->base, fb,
15378 crtc_x, crtc_y, crtc_w, crtc_h,
15379 src_x, src_y, src_w, src_h, ctx);
15382 static const struct drm_plane_funcs intel_cursor_plane_funcs = {
15383 .update_plane = intel_legacy_cursor_update,
15384 .disable_plane = drm_atomic_helper_disable_plane,
15385 .destroy = intel_plane_destroy,
15386 .atomic_duplicate_state = intel_plane_duplicate_state,
15387 .atomic_destroy_state = intel_plane_destroy_state,
15388 .format_mod_supported = intel_cursor_format_mod_supported,
15391 static bool i9xx_plane_has_fbc(struct drm_i915_private *dev_priv,
15392 enum i9xx_plane_id i9xx_plane)
15394 if (!HAS_FBC(dev_priv))
15397 if (IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
15398 return i9xx_plane == PLANE_A; /* tied to pipe A */
15399 else if (IS_IVYBRIDGE(dev_priv))
15400 return i9xx_plane == PLANE_A || i9xx_plane == PLANE_B ||
15401 i9xx_plane == PLANE_C;
15402 else if (INTEL_GEN(dev_priv) >= 4)
15403 return i9xx_plane == PLANE_A || i9xx_plane == PLANE_B;
15405 return i9xx_plane == PLANE_A;
15408 static struct intel_plane *
15409 intel_primary_plane_create(struct drm_i915_private *dev_priv, enum pipe pipe)
15411 struct intel_plane *plane;
15412 const struct drm_plane_funcs *plane_funcs;
15413 unsigned int supported_rotations;
15414 unsigned int possible_crtcs;
15415 const u64 *modifiers;
15416 const u32 *formats;
15420 if (INTEL_GEN(dev_priv) >= 9)
15421 return skl_universal_plane_create(dev_priv, pipe,
15424 plane = intel_plane_alloc();
15428 plane->pipe = pipe;
15430 * On gen2/3 only plane A can do FBC, but the panel fitter and LVDS
15431 * port is hooked to pipe B. Hence we want plane A feeding pipe B.
15433 if (HAS_FBC(dev_priv) && INTEL_GEN(dev_priv) < 4)
15434 plane->i9xx_plane = (enum i9xx_plane_id) !pipe;
15436 plane->i9xx_plane = (enum i9xx_plane_id) pipe;
15437 plane->id = PLANE_PRIMARY;
15438 plane->frontbuffer_bit = INTEL_FRONTBUFFER(pipe, plane->id);
15440 plane->has_fbc = i9xx_plane_has_fbc(dev_priv, plane->i9xx_plane);
15441 if (plane->has_fbc) {
15442 struct intel_fbc *fbc = &dev_priv->fbc;
15444 fbc->possible_framebuffer_bits |= plane->frontbuffer_bit;
15447 if (INTEL_GEN(dev_priv) >= 4) {
15449 * WaFP16GammaEnabling:ivb
15450 * "Workaround : When using the 64-bit format, the plane
15451 * output on each color channel has one quarter amplitude.
15452 * It can be brought up to full amplitude by using pipe
15453 * gamma correction or pipe color space conversion to
15454 * multiply the plane output by four."
15456 * There is no dedicated plane gamma for the primary plane,
15457 * and using the pipe gamma/csc could conflict with other
15458 * planes, so we choose not to expose fp16 on IVB primary
15459 * planes. HSW primary planes no longer have this problem.
15461 if (IS_IVYBRIDGE(dev_priv)) {
15462 formats = ivb_primary_formats;
15463 num_formats = ARRAY_SIZE(ivb_primary_formats);
15465 formats = i965_primary_formats;
15466 num_formats = ARRAY_SIZE(i965_primary_formats);
15468 modifiers = i9xx_format_modifiers;
15470 plane->max_stride = i9xx_plane_max_stride;
15471 plane->update_plane = i9xx_update_plane;
15472 plane->disable_plane = i9xx_disable_plane;
15473 plane->get_hw_state = i9xx_plane_get_hw_state;
15474 plane->check_plane = i9xx_plane_check;
15476 if (IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
15477 plane->min_cdclk = hsw_plane_min_cdclk;
15478 else if (IS_IVYBRIDGE(dev_priv))
15479 plane->min_cdclk = ivb_plane_min_cdclk;
15480 else if (IS_CHERRYVIEW(dev_priv) || IS_VALLEYVIEW(dev_priv))
15481 plane->min_cdclk = vlv_plane_min_cdclk;
15483 plane->min_cdclk = i9xx_plane_min_cdclk;
15485 plane_funcs = &i965_plane_funcs;
15487 formats = i8xx_primary_formats;
15488 num_formats = ARRAY_SIZE(i8xx_primary_formats);
15489 modifiers = i9xx_format_modifiers;
15491 plane->max_stride = i9xx_plane_max_stride;
15492 plane->update_plane = i9xx_update_plane;
15493 plane->disable_plane = i9xx_disable_plane;
15494 plane->get_hw_state = i9xx_plane_get_hw_state;
15495 plane->check_plane = i9xx_plane_check;
15496 plane->min_cdclk = i9xx_plane_min_cdclk;
15498 plane_funcs = &i8xx_plane_funcs;
15501 possible_crtcs = BIT(pipe);
15503 if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
15504 ret = drm_universal_plane_init(&dev_priv->drm, &plane->base,
15505 possible_crtcs, plane_funcs,
15506 formats, num_formats, modifiers,
15507 DRM_PLANE_TYPE_PRIMARY,
15508 "primary %c", pipe_name(pipe));
15510 ret = drm_universal_plane_init(&dev_priv->drm, &plane->base,
15511 possible_crtcs, plane_funcs,
15512 formats, num_formats, modifiers,
15513 DRM_PLANE_TYPE_PRIMARY,
15515 plane_name(plane->i9xx_plane));
15519 if (IS_CHERRYVIEW(dev_priv) && pipe == PIPE_B) {
15520 supported_rotations =
15521 DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180 |
15522 DRM_MODE_REFLECT_X;
15523 } else if (INTEL_GEN(dev_priv) >= 4) {
15524 supported_rotations =
15525 DRM_MODE_ROTATE_0 | DRM_MODE_ROTATE_180;
15527 supported_rotations = DRM_MODE_ROTATE_0;
15530 if (INTEL_GEN(dev_priv) >= 4)
15531 drm_plane_create_rotation_property(&plane->base,
15533 supported_rotations);
15536 drm_plane_create_zpos_immutable_property(&plane->base, zpos);
15538 drm_plane_helper_add(&plane->base, &intel_plane_helper_funcs);
15543 intel_plane_free(plane);
15545 return ERR_PTR(ret);
15548 static struct intel_plane *
15549 intel_cursor_plane_create(struct drm_i915_private *dev_priv,
15552 unsigned int possible_crtcs;
15553 struct intel_plane *cursor;
15556 cursor = intel_plane_alloc();
15557 if (IS_ERR(cursor))
15560 cursor->pipe = pipe;
15561 cursor->i9xx_plane = (enum i9xx_plane_id) pipe;
15562 cursor->id = PLANE_CURSOR;
15563 cursor->frontbuffer_bit = INTEL_FRONTBUFFER(pipe, cursor->id);
15565 if (IS_I845G(dev_priv) || IS_I865G(dev_priv)) {
15566 cursor->max_stride = i845_cursor_max_stride;
15567 cursor->update_plane = i845_update_cursor;
15568 cursor->disable_plane = i845_disable_cursor;
15569 cursor->get_hw_state = i845_cursor_get_hw_state;
15570 cursor->check_plane = i845_check_cursor;
15572 cursor->max_stride = i9xx_cursor_max_stride;
15573 cursor->update_plane = i9xx_update_cursor;
15574 cursor->disable_plane = i9xx_disable_cursor;
15575 cursor->get_hw_state = i9xx_cursor_get_hw_state;
15576 cursor->check_plane = i9xx_check_cursor;
15579 cursor->cursor.base = ~0;
15580 cursor->cursor.cntl = ~0;
15582 if (IS_I845G(dev_priv) || IS_I865G(dev_priv) || HAS_CUR_FBC(dev_priv))
15583 cursor->cursor.size = ~0;
15585 possible_crtcs = BIT(pipe);
15587 ret = drm_universal_plane_init(&dev_priv->drm, &cursor->base,
15588 possible_crtcs, &intel_cursor_plane_funcs,
15589 intel_cursor_formats,
15590 ARRAY_SIZE(intel_cursor_formats),
15591 cursor_format_modifiers,
15592 DRM_PLANE_TYPE_CURSOR,
15593 "cursor %c", pipe_name(pipe));
15597 if (INTEL_GEN(dev_priv) >= 4)
15598 drm_plane_create_rotation_property(&cursor->base,
15600 DRM_MODE_ROTATE_0 |
15601 DRM_MODE_ROTATE_180);
15603 zpos = RUNTIME_INFO(dev_priv)->num_sprites[pipe] + 1;
15604 drm_plane_create_zpos_immutable_property(&cursor->base, zpos);
15606 drm_plane_helper_add(&cursor->base, &intel_plane_helper_funcs);
15611 intel_plane_free(cursor);
15613 return ERR_PTR(ret);
15616 static void intel_crtc_init_scalers(struct intel_crtc *crtc,
15617 struct intel_crtc_state *crtc_state)
15619 struct intel_crtc_scaler_state *scaler_state =
15620 &crtc_state->scaler_state;
15621 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
15624 crtc->num_scalers = RUNTIME_INFO(dev_priv)->num_scalers[crtc->pipe];
15625 if (!crtc->num_scalers)
15628 for (i = 0; i < crtc->num_scalers; i++) {
15629 struct intel_scaler *scaler = &scaler_state->scalers[i];
15631 scaler->in_use = 0;
15635 scaler_state->scaler_id = -1;
15638 #define INTEL_CRTC_FUNCS \
15639 .gamma_set = drm_atomic_helper_legacy_gamma_set, \
15640 .set_config = drm_atomic_helper_set_config, \
15641 .destroy = intel_crtc_destroy, \
15642 .page_flip = drm_atomic_helper_page_flip, \
15643 .atomic_duplicate_state = intel_crtc_duplicate_state, \
15644 .atomic_destroy_state = intel_crtc_destroy_state, \
15645 .set_crc_source = intel_crtc_set_crc_source, \
15646 .verify_crc_source = intel_crtc_verify_crc_source, \
15647 .get_crc_sources = intel_crtc_get_crc_sources
15649 static const struct drm_crtc_funcs bdw_crtc_funcs = {
15652 .get_vblank_counter = g4x_get_vblank_counter,
15653 .enable_vblank = bdw_enable_vblank,
15654 .disable_vblank = bdw_disable_vblank,
15657 static const struct drm_crtc_funcs ilk_crtc_funcs = {
15660 .get_vblank_counter = g4x_get_vblank_counter,
15661 .enable_vblank = ilk_enable_vblank,
15662 .disable_vblank = ilk_disable_vblank,
15665 static const struct drm_crtc_funcs g4x_crtc_funcs = {
15668 .get_vblank_counter = g4x_get_vblank_counter,
15669 .enable_vblank = i965_enable_vblank,
15670 .disable_vblank = i965_disable_vblank,
15673 static const struct drm_crtc_funcs i965_crtc_funcs = {
15676 .get_vblank_counter = i915_get_vblank_counter,
15677 .enable_vblank = i965_enable_vblank,
15678 .disable_vblank = i965_disable_vblank,
15681 static const struct drm_crtc_funcs i915gm_crtc_funcs = {
15684 .get_vblank_counter = i915_get_vblank_counter,
15685 .enable_vblank = i915gm_enable_vblank,
15686 .disable_vblank = i915gm_disable_vblank,
15689 static const struct drm_crtc_funcs i915_crtc_funcs = {
15692 .get_vblank_counter = i915_get_vblank_counter,
15693 .enable_vblank = i8xx_enable_vblank,
15694 .disable_vblank = i8xx_disable_vblank,
15697 static const struct drm_crtc_funcs i8xx_crtc_funcs = {
15700 /* no hw vblank counter */
15701 .enable_vblank = i8xx_enable_vblank,
15702 .disable_vblank = i8xx_disable_vblank,
15705 static int intel_crtc_init(struct drm_i915_private *dev_priv, enum pipe pipe)
15707 const struct drm_crtc_funcs *funcs;
15708 struct intel_crtc *intel_crtc;
15709 struct intel_crtc_state *crtc_state = NULL;
15710 struct intel_plane *primary = NULL;
15711 struct intel_plane *cursor = NULL;
15714 intel_crtc = kzalloc(sizeof(*intel_crtc), GFP_KERNEL);
15718 crtc_state = kzalloc(sizeof(*crtc_state), GFP_KERNEL);
15723 __drm_atomic_helper_crtc_reset(&intel_crtc->base, &crtc_state->base);
15724 intel_crtc->config = crtc_state;
15726 primary = intel_primary_plane_create(dev_priv, pipe);
15727 if (IS_ERR(primary)) {
15728 ret = PTR_ERR(primary);
15731 intel_crtc->plane_ids_mask |= BIT(primary->id);
15733 for_each_sprite(dev_priv, pipe, sprite) {
15734 struct intel_plane *plane;
15736 plane = intel_sprite_plane_create(dev_priv, pipe, sprite);
15737 if (IS_ERR(plane)) {
15738 ret = PTR_ERR(plane);
15741 intel_crtc->plane_ids_mask |= BIT(plane->id);
15744 cursor = intel_cursor_plane_create(dev_priv, pipe);
15745 if (IS_ERR(cursor)) {
15746 ret = PTR_ERR(cursor);
15749 intel_crtc->plane_ids_mask |= BIT(cursor->id);
15751 if (HAS_GMCH(dev_priv)) {
15752 if (IS_CHERRYVIEW(dev_priv) ||
15753 IS_VALLEYVIEW(dev_priv) || IS_G4X(dev_priv))
15754 funcs = &g4x_crtc_funcs;
15755 else if (IS_GEN(dev_priv, 4))
15756 funcs = &i965_crtc_funcs;
15757 else if (IS_I945GM(dev_priv) || IS_I915GM(dev_priv))
15758 funcs = &i915gm_crtc_funcs;
15759 else if (IS_GEN(dev_priv, 3))
15760 funcs = &i915_crtc_funcs;
15762 funcs = &i8xx_crtc_funcs;
15764 if (INTEL_GEN(dev_priv) >= 8)
15765 funcs = &bdw_crtc_funcs;
15767 funcs = &ilk_crtc_funcs;
15770 ret = drm_crtc_init_with_planes(&dev_priv->drm, &intel_crtc->base,
15771 &primary->base, &cursor->base,
15772 funcs, "pipe %c", pipe_name(pipe));
15776 intel_crtc->pipe = pipe;
15778 /* initialize shared scalers */
15779 intel_crtc_init_scalers(intel_crtc, crtc_state);
15781 BUG_ON(pipe >= ARRAY_SIZE(dev_priv->pipe_to_crtc_mapping) ||
15782 dev_priv->pipe_to_crtc_mapping[pipe] != NULL);
15783 dev_priv->pipe_to_crtc_mapping[pipe] = intel_crtc;
15785 if (INTEL_GEN(dev_priv) < 9) {
15786 enum i9xx_plane_id i9xx_plane = primary->i9xx_plane;
15788 BUG_ON(i9xx_plane >= ARRAY_SIZE(dev_priv->plane_to_crtc_mapping) ||
15789 dev_priv->plane_to_crtc_mapping[i9xx_plane] != NULL);
15790 dev_priv->plane_to_crtc_mapping[i9xx_plane] = intel_crtc;
15793 intel_color_init(intel_crtc);
15795 WARN_ON(drm_crtc_index(&intel_crtc->base) != intel_crtc->pipe);
15801 * drm_mode_config_cleanup() will free up any
15802 * crtcs/planes already initialized.
15810 int intel_get_pipe_from_crtc_id_ioctl(struct drm_device *dev, void *data,
15811 struct drm_file *file)
15813 struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
15814 struct drm_crtc *drmmode_crtc;
15815 struct intel_crtc *crtc;
15817 drmmode_crtc = drm_crtc_find(dev, file, pipe_from_crtc_id->crtc_id);
15821 crtc = to_intel_crtc(drmmode_crtc);
15822 pipe_from_crtc_id->pipe = crtc->pipe;
15827 static u32 intel_encoder_possible_clones(struct intel_encoder *encoder)
15829 struct drm_device *dev = encoder->base.dev;
15830 struct intel_encoder *source_encoder;
15831 u32 possible_clones = 0;
15833 for_each_intel_encoder(dev, source_encoder) {
15834 if (encoders_cloneable(encoder, source_encoder))
15835 possible_clones |= drm_encoder_mask(&source_encoder->base);
15838 return possible_clones;
15841 static u32 intel_encoder_possible_crtcs(struct intel_encoder *encoder)
15843 struct drm_device *dev = encoder->base.dev;
15844 struct intel_crtc *crtc;
15845 u32 possible_crtcs = 0;
15847 for_each_intel_crtc(dev, crtc) {
15848 if (encoder->crtc_mask & BIT(crtc->pipe))
15849 possible_crtcs |= drm_crtc_mask(&crtc->base);
15852 return possible_crtcs;
15855 static bool ilk_has_edp_a(struct drm_i915_private *dev_priv)
15857 if (!IS_MOBILE(dev_priv))
15860 if ((I915_READ(DP_A) & DP_DETECTED) == 0)
15863 if (IS_GEN(dev_priv, 5) && (I915_READ(FUSE_STRAP) & ILK_eDP_A_DISABLE))
15869 static bool intel_ddi_crt_present(struct drm_i915_private *dev_priv)
15871 if (INTEL_GEN(dev_priv) >= 9)
15874 if (IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv))
15877 if (HAS_PCH_LPT_H(dev_priv) &&
15878 I915_READ(SFUSE_STRAP) & SFUSE_STRAP_CRT_DISABLED)
15881 /* DDI E can't be used if DDI A requires 4 lanes */
15882 if (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
15885 if (!dev_priv->vbt.int_crt_support)
15891 void intel_pps_unlock_regs_wa(struct drm_i915_private *dev_priv)
15896 if (HAS_DDI(dev_priv))
15899 * This w/a is needed at least on CPT/PPT, but to be sure apply it
15900 * everywhere where registers can be write protected.
15902 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
15907 for (pps_idx = 0; pps_idx < pps_num; pps_idx++) {
15908 u32 val = I915_READ(PP_CONTROL(pps_idx));
15910 val = (val & ~PANEL_UNLOCK_MASK) | PANEL_UNLOCK_REGS;
15911 I915_WRITE(PP_CONTROL(pps_idx), val);
15915 static void intel_pps_init(struct drm_i915_private *dev_priv)
15917 if (HAS_PCH_SPLIT(dev_priv) || IS_GEN9_LP(dev_priv))
15918 dev_priv->pps_mmio_base = PCH_PPS_BASE;
15919 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
15920 dev_priv->pps_mmio_base = VLV_PPS_BASE;
15922 dev_priv->pps_mmio_base = PPS_BASE;
15924 intel_pps_unlock_regs_wa(dev_priv);
15927 static void intel_setup_outputs(struct drm_i915_private *dev_priv)
15929 struct intel_encoder *encoder;
15930 bool dpd_is_edp = false;
15932 intel_pps_init(dev_priv);
15934 if (!HAS_DISPLAY(dev_priv) || !INTEL_DISPLAY_ENABLED(dev_priv))
15937 if (INTEL_GEN(dev_priv) >= 12) {
15938 intel_ddi_init(dev_priv, PORT_A);
15939 intel_ddi_init(dev_priv, PORT_B);
15940 intel_ddi_init(dev_priv, PORT_D);
15941 intel_ddi_init(dev_priv, PORT_E);
15942 intel_ddi_init(dev_priv, PORT_F);
15943 intel_ddi_init(dev_priv, PORT_G);
15944 intel_ddi_init(dev_priv, PORT_H);
15945 intel_ddi_init(dev_priv, PORT_I);
15946 icl_dsi_init(dev_priv);
15947 } else if (IS_ELKHARTLAKE(dev_priv)) {
15948 intel_ddi_init(dev_priv, PORT_A);
15949 intel_ddi_init(dev_priv, PORT_B);
15950 intel_ddi_init(dev_priv, PORT_C);
15951 intel_ddi_init(dev_priv, PORT_D);
15952 icl_dsi_init(dev_priv);
15953 } else if (IS_GEN(dev_priv, 11)) {
15954 intel_ddi_init(dev_priv, PORT_A);
15955 intel_ddi_init(dev_priv, PORT_B);
15956 intel_ddi_init(dev_priv, PORT_C);
15957 intel_ddi_init(dev_priv, PORT_D);
15958 intel_ddi_init(dev_priv, PORT_E);
15960 * On some ICL SKUs port F is not present. No strap bits for
15961 * this, so rely on VBT.
15962 * Work around broken VBTs on SKUs known to have no port F.
15964 if (IS_ICL_WITH_PORT_F(dev_priv) &&
15965 intel_bios_is_port_present(dev_priv, PORT_F))
15966 intel_ddi_init(dev_priv, PORT_F);
15968 icl_dsi_init(dev_priv);
15969 } else if (IS_GEN9_LP(dev_priv)) {
15971 * FIXME: Broxton doesn't support port detection via the
15972 * DDI_BUF_CTL_A or SFUSE_STRAP registers, find another way to
15973 * detect the ports.
15975 intel_ddi_init(dev_priv, PORT_A);
15976 intel_ddi_init(dev_priv, PORT_B);
15977 intel_ddi_init(dev_priv, PORT_C);
15979 vlv_dsi_init(dev_priv);
15980 } else if (HAS_DDI(dev_priv)) {
15983 if (intel_ddi_crt_present(dev_priv))
15984 intel_crt_init(dev_priv);
15987 * Haswell uses DDI functions to detect digital outputs.
15988 * On SKL pre-D0 the strap isn't connected, so we assume
15991 found = I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_INIT_DISPLAY_DETECTED;
15992 /* WaIgnoreDDIAStrap: skl */
15993 if (found || IS_GEN9_BC(dev_priv))
15994 intel_ddi_init(dev_priv, PORT_A);
15996 /* DDI B, C, D, and F detection is indicated by the SFUSE_STRAP
15998 found = I915_READ(SFUSE_STRAP);
16000 if (found & SFUSE_STRAP_DDIB_DETECTED)
16001 intel_ddi_init(dev_priv, PORT_B);
16002 if (found & SFUSE_STRAP_DDIC_DETECTED)
16003 intel_ddi_init(dev_priv, PORT_C);
16004 if (found & SFUSE_STRAP_DDID_DETECTED)
16005 intel_ddi_init(dev_priv, PORT_D);
16006 if (found & SFUSE_STRAP_DDIF_DETECTED)
16007 intel_ddi_init(dev_priv, PORT_F);
16009 * On SKL we don't have a way to detect DDI-E so we rely on VBT.
16011 if (IS_GEN9_BC(dev_priv) &&
16012 intel_bios_is_port_present(dev_priv, PORT_E))
16013 intel_ddi_init(dev_priv, PORT_E);
16015 } else if (HAS_PCH_SPLIT(dev_priv)) {
16019 * intel_edp_init_connector() depends on this completing first,
16020 * to prevent the registration of both eDP and LVDS and the
16021 * incorrect sharing of the PPS.
16023 intel_lvds_init(dev_priv);
16024 intel_crt_init(dev_priv);
16026 dpd_is_edp = intel_dp_is_port_edp(dev_priv, PORT_D);
16028 if (ilk_has_edp_a(dev_priv))
16029 intel_dp_init(dev_priv, DP_A, PORT_A);
16031 if (I915_READ(PCH_HDMIB) & SDVO_DETECTED) {
16032 /* PCH SDVOB multiplex with HDMIB */
16033 found = intel_sdvo_init(dev_priv, PCH_SDVOB, PORT_B);
16035 intel_hdmi_init(dev_priv, PCH_HDMIB, PORT_B);
16036 if (!found && (I915_READ(PCH_DP_B) & DP_DETECTED))
16037 intel_dp_init(dev_priv, PCH_DP_B, PORT_B);
16040 if (I915_READ(PCH_HDMIC) & SDVO_DETECTED)
16041 intel_hdmi_init(dev_priv, PCH_HDMIC, PORT_C);
16043 if (!dpd_is_edp && I915_READ(PCH_HDMID) & SDVO_DETECTED)
16044 intel_hdmi_init(dev_priv, PCH_HDMID, PORT_D);
16046 if (I915_READ(PCH_DP_C) & DP_DETECTED)
16047 intel_dp_init(dev_priv, PCH_DP_C, PORT_C);
16049 if (I915_READ(PCH_DP_D) & DP_DETECTED)
16050 intel_dp_init(dev_priv, PCH_DP_D, PORT_D);
16051 } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
16052 bool has_edp, has_port;
16054 if (IS_VALLEYVIEW(dev_priv) && dev_priv->vbt.int_crt_support)
16055 intel_crt_init(dev_priv);
16058 * The DP_DETECTED bit is the latched state of the DDC
16059 * SDA pin at boot. However since eDP doesn't require DDC
16060 * (no way to plug in a DP->HDMI dongle) the DDC pins for
16061 * eDP ports may have been muxed to an alternate function.
16062 * Thus we can't rely on the DP_DETECTED bit alone to detect
16063 * eDP ports. Consult the VBT as well as DP_DETECTED to
16064 * detect eDP ports.
16066 * Sadly the straps seem to be missing sometimes even for HDMI
16067 * ports (eg. on Voyo V3 - CHT x7-Z8700), so check both strap
16068 * and VBT for the presence of the port. Additionally we can't
16069 * trust the port type the VBT declares as we've seen at least
16070 * HDMI ports that the VBT claim are DP or eDP.
16072 has_edp = intel_dp_is_port_edp(dev_priv, PORT_B);
16073 has_port = intel_bios_is_port_present(dev_priv, PORT_B);
16074 if (I915_READ(VLV_DP_B) & DP_DETECTED || has_port)
16075 has_edp &= intel_dp_init(dev_priv, VLV_DP_B, PORT_B);
16076 if ((I915_READ(VLV_HDMIB) & SDVO_DETECTED || has_port) && !has_edp)
16077 intel_hdmi_init(dev_priv, VLV_HDMIB, PORT_B);
16079 has_edp = intel_dp_is_port_edp(dev_priv, PORT_C);
16080 has_port = intel_bios_is_port_present(dev_priv, PORT_C);
16081 if (I915_READ(VLV_DP_C) & DP_DETECTED || has_port)
16082 has_edp &= intel_dp_init(dev_priv, VLV_DP_C, PORT_C);
16083 if ((I915_READ(VLV_HDMIC) & SDVO_DETECTED || has_port) && !has_edp)
16084 intel_hdmi_init(dev_priv, VLV_HDMIC, PORT_C);
16086 if (IS_CHERRYVIEW(dev_priv)) {
16088 * eDP not supported on port D,
16089 * so no need to worry about it
16091 has_port = intel_bios_is_port_present(dev_priv, PORT_D);
16092 if (I915_READ(CHV_DP_D) & DP_DETECTED || has_port)
16093 intel_dp_init(dev_priv, CHV_DP_D, PORT_D);
16094 if (I915_READ(CHV_HDMID) & SDVO_DETECTED || has_port)
16095 intel_hdmi_init(dev_priv, CHV_HDMID, PORT_D);
16098 vlv_dsi_init(dev_priv);
16099 } else if (IS_PINEVIEW(dev_priv)) {
16100 intel_lvds_init(dev_priv);
16101 intel_crt_init(dev_priv);
16102 } else if (IS_GEN_RANGE(dev_priv, 3, 4)) {
16103 bool found = false;
16105 if (IS_MOBILE(dev_priv))
16106 intel_lvds_init(dev_priv);
16108 intel_crt_init(dev_priv);
16110 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
16111 DRM_DEBUG_KMS("probing SDVOB\n");
16112 found = intel_sdvo_init(dev_priv, GEN3_SDVOB, PORT_B);
16113 if (!found && IS_G4X(dev_priv)) {
16114 DRM_DEBUG_KMS("probing HDMI on SDVOB\n");
16115 intel_hdmi_init(dev_priv, GEN4_HDMIB, PORT_B);
16118 if (!found && IS_G4X(dev_priv))
16119 intel_dp_init(dev_priv, DP_B, PORT_B);
16122 /* Before G4X SDVOC doesn't have its own detect register */
16124 if (I915_READ(GEN3_SDVOB) & SDVO_DETECTED) {
16125 DRM_DEBUG_KMS("probing SDVOC\n");
16126 found = intel_sdvo_init(dev_priv, GEN3_SDVOC, PORT_C);
16129 if (!found && (I915_READ(GEN3_SDVOC) & SDVO_DETECTED)) {
16131 if (IS_G4X(dev_priv)) {
16132 DRM_DEBUG_KMS("probing HDMI on SDVOC\n");
16133 intel_hdmi_init(dev_priv, GEN4_HDMIC, PORT_C);
16135 if (IS_G4X(dev_priv))
16136 intel_dp_init(dev_priv, DP_C, PORT_C);
16139 if (IS_G4X(dev_priv) && (I915_READ(DP_D) & DP_DETECTED))
16140 intel_dp_init(dev_priv, DP_D, PORT_D);
16142 if (SUPPORTS_TV(dev_priv))
16143 intel_tv_init(dev_priv);
16144 } else if (IS_GEN(dev_priv, 2)) {
16145 if (IS_I85X(dev_priv))
16146 intel_lvds_init(dev_priv);
16148 intel_crt_init(dev_priv);
16149 intel_dvo_init(dev_priv);
16152 intel_psr_init(dev_priv);
16154 for_each_intel_encoder(&dev_priv->drm, encoder) {
16155 encoder->base.possible_crtcs =
16156 intel_encoder_possible_crtcs(encoder);
16157 encoder->base.possible_clones =
16158 intel_encoder_possible_clones(encoder);
16161 intel_init_pch_refclk(dev_priv);
16163 drm_helper_move_panel_connectors_to_head(&dev_priv->drm);
16166 static void intel_user_framebuffer_destroy(struct drm_framebuffer *fb)
16168 struct intel_framebuffer *intel_fb = to_intel_framebuffer(fb);
16170 drm_framebuffer_cleanup(fb);
16171 intel_frontbuffer_put(intel_fb->frontbuffer);
16176 static int intel_user_framebuffer_create_handle(struct drm_framebuffer *fb,
16177 struct drm_file *file,
16178 unsigned int *handle)
16180 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
16182 if (obj->userptr.mm) {
16183 DRM_DEBUG("attempting to use a userptr for a framebuffer, denied\n");
16187 return drm_gem_handle_create(file, &obj->base, handle);
16190 static int intel_user_framebuffer_dirty(struct drm_framebuffer *fb,
16191 struct drm_file *file,
16192 unsigned flags, unsigned color,
16193 struct drm_clip_rect *clips,
16194 unsigned num_clips)
16196 struct drm_i915_gem_object *obj = intel_fb_obj(fb);
16198 i915_gem_object_flush_if_display(obj);
16199 intel_frontbuffer_flush(to_intel_frontbuffer(fb), ORIGIN_DIRTYFB);
16204 static const struct drm_framebuffer_funcs intel_fb_funcs = {
16205 .destroy = intel_user_framebuffer_destroy,
16206 .create_handle = intel_user_framebuffer_create_handle,
16207 .dirty = intel_user_framebuffer_dirty,
16210 static int intel_framebuffer_init(struct intel_framebuffer *intel_fb,
16211 struct drm_i915_gem_object *obj,
16212 struct drm_mode_fb_cmd2 *mode_cmd)
16214 struct drm_i915_private *dev_priv = to_i915(obj->base.dev);
16215 struct drm_framebuffer *fb = &intel_fb->base;
16217 unsigned int tiling, stride;
16221 intel_fb->frontbuffer = intel_frontbuffer_get(obj);
16222 if (!intel_fb->frontbuffer)
16225 i915_gem_object_lock(obj);
16226 tiling = i915_gem_object_get_tiling(obj);
16227 stride = i915_gem_object_get_stride(obj);
16228 i915_gem_object_unlock(obj);
16230 if (mode_cmd->flags & DRM_MODE_FB_MODIFIERS) {
16232 * If there's a fence, enforce that
16233 * the fb modifier and tiling mode match.
16235 if (tiling != I915_TILING_NONE &&
16236 tiling != intel_fb_modifier_to_tiling(mode_cmd->modifier[0])) {
16237 DRM_DEBUG_KMS("tiling_mode doesn't match fb modifier\n");
16241 if (tiling == I915_TILING_X) {
16242 mode_cmd->modifier[0] = I915_FORMAT_MOD_X_TILED;
16243 } else if (tiling == I915_TILING_Y) {
16244 DRM_DEBUG_KMS("No Y tiling for legacy addfb\n");
16249 if (!drm_any_plane_has_format(&dev_priv->drm,
16250 mode_cmd->pixel_format,
16251 mode_cmd->modifier[0])) {
16252 struct drm_format_name_buf format_name;
16254 DRM_DEBUG_KMS("unsupported pixel format %s / modifier 0x%llx\n",
16255 drm_get_format_name(mode_cmd->pixel_format,
16257 mode_cmd->modifier[0]);
16262 * gen2/3 display engine uses the fence if present,
16263 * so the tiling mode must match the fb modifier exactly.
16265 if (INTEL_GEN(dev_priv) < 4 &&
16266 tiling != intel_fb_modifier_to_tiling(mode_cmd->modifier[0])) {
16267 DRM_DEBUG_KMS("tiling_mode must match fb modifier exactly on gen2/3\n");
16271 max_stride = intel_fb_max_stride(dev_priv, mode_cmd->pixel_format,
16272 mode_cmd->modifier[0]);
16273 if (mode_cmd->pitches[0] > max_stride) {
16274 DRM_DEBUG_KMS("%s pitch (%u) must be at most %d\n",
16275 mode_cmd->modifier[0] != DRM_FORMAT_MOD_LINEAR ?
16276 "tiled" : "linear",
16277 mode_cmd->pitches[0], max_stride);
16282 * If there's a fence, enforce that
16283 * the fb pitch and fence stride match.
16285 if (tiling != I915_TILING_NONE && mode_cmd->pitches[0] != stride) {
16286 DRM_DEBUG_KMS("pitch (%d) must match tiling stride (%d)\n",
16287 mode_cmd->pitches[0], stride);
16291 /* FIXME need to adjust LINOFF/TILEOFF accordingly. */
16292 if (mode_cmd->offsets[0] != 0)
16295 drm_helper_mode_fill_fb_struct(&dev_priv->drm, fb, mode_cmd);
16297 for (i = 0; i < fb->format->num_planes; i++) {
16298 u32 stride_alignment;
16300 if (mode_cmd->handles[i] != mode_cmd->handles[0]) {
16301 DRM_DEBUG_KMS("bad plane %d handle\n", i);
16305 stride_alignment = intel_fb_stride_alignment(fb, i);
16308 * Display WA #0531: skl,bxt,kbl,glk
16310 * Render decompression and plane width > 3840
16311 * combined with horizontal panning requires the
16312 * plane stride to be a multiple of 4. We'll just
16313 * require the entire fb to accommodate that to avoid
16314 * potential runtime errors at plane configuration time.
16316 if (IS_GEN(dev_priv, 9) && i == 0 && fb->width > 3840 &&
16317 is_ccs_modifier(fb->modifier))
16318 stride_alignment *= 4;
16320 if (fb->pitches[i] & (stride_alignment - 1)) {
16321 DRM_DEBUG_KMS("plane %d pitch (%d) must be at least %u byte aligned\n",
16322 i, fb->pitches[i], stride_alignment);
16326 fb->obj[i] = &obj->base;
16329 ret = intel_fill_fb_info(dev_priv, fb);
16333 ret = drm_framebuffer_init(&dev_priv->drm, fb, &intel_fb_funcs);
16335 DRM_ERROR("framebuffer init failed %d\n", ret);
16342 intel_frontbuffer_put(intel_fb->frontbuffer);
16346 static struct drm_framebuffer *
16347 intel_user_framebuffer_create(struct drm_device *dev,
16348 struct drm_file *filp,
16349 const struct drm_mode_fb_cmd2 *user_mode_cmd)
16351 struct drm_framebuffer *fb;
16352 struct drm_i915_gem_object *obj;
16353 struct drm_mode_fb_cmd2 mode_cmd = *user_mode_cmd;
16355 obj = i915_gem_object_lookup(filp, mode_cmd.handles[0]);
16357 return ERR_PTR(-ENOENT);
16359 fb = intel_framebuffer_create(obj, &mode_cmd);
16360 i915_gem_object_put(obj);
16365 static void intel_atomic_state_free(struct drm_atomic_state *state)
16367 struct intel_atomic_state *intel_state = to_intel_atomic_state(state);
16369 drm_atomic_state_default_release(state);
16371 i915_sw_fence_fini(&intel_state->commit_ready);
16376 static enum drm_mode_status
16377 intel_mode_valid(struct drm_device *dev,
16378 const struct drm_display_mode *mode)
16380 struct drm_i915_private *dev_priv = to_i915(dev);
16381 int hdisplay_max, htotal_max;
16382 int vdisplay_max, vtotal_max;
16385 * Can't reject DBLSCAN here because Xorg ddxen can add piles
16386 * of DBLSCAN modes to the output's mode list when they detect
16387 * the scaling mode property on the connector. And they don't
16388 * ask the kernel to validate those modes in any way until
16389 * modeset time at which point the client gets a protocol error.
16390 * So in order to not upset those clients we silently ignore the
16391 * DBLSCAN flag on such connectors. For other connectors we will
16392 * reject modes with the DBLSCAN flag in encoder->compute_config().
16393 * And we always reject DBLSCAN modes in connector->mode_valid()
16394 * as we never want such modes on the connector's mode list.
16397 if (mode->vscan > 1)
16398 return MODE_NO_VSCAN;
16400 if (mode->flags & DRM_MODE_FLAG_HSKEW)
16401 return MODE_H_ILLEGAL;
16403 if (mode->flags & (DRM_MODE_FLAG_CSYNC |
16404 DRM_MODE_FLAG_NCSYNC |
16405 DRM_MODE_FLAG_PCSYNC))
16408 if (mode->flags & (DRM_MODE_FLAG_BCAST |
16409 DRM_MODE_FLAG_PIXMUX |
16410 DRM_MODE_FLAG_CLKDIV2))
16413 /* Transcoder timing limits */
16414 if (INTEL_GEN(dev_priv) >= 11) {
16415 hdisplay_max = 16384;
16416 vdisplay_max = 8192;
16417 htotal_max = 16384;
16419 } else if (INTEL_GEN(dev_priv) >= 9 ||
16420 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv)) {
16421 hdisplay_max = 8192; /* FDI max 4096 handled elsewhere */
16422 vdisplay_max = 4096;
16425 } else if (INTEL_GEN(dev_priv) >= 3) {
16426 hdisplay_max = 4096;
16427 vdisplay_max = 4096;
16431 hdisplay_max = 2048;
16432 vdisplay_max = 2048;
16437 if (mode->hdisplay > hdisplay_max ||
16438 mode->hsync_start > htotal_max ||
16439 mode->hsync_end > htotal_max ||
16440 mode->htotal > htotal_max)
16441 return MODE_H_ILLEGAL;
16443 if (mode->vdisplay > vdisplay_max ||
16444 mode->vsync_start > vtotal_max ||
16445 mode->vsync_end > vtotal_max ||
16446 mode->vtotal > vtotal_max)
16447 return MODE_V_ILLEGAL;
16449 if (INTEL_GEN(dev_priv) >= 5) {
16450 if (mode->hdisplay < 64 ||
16451 mode->htotal - mode->hdisplay < 32)
16452 return MODE_H_ILLEGAL;
16454 if (mode->vtotal - mode->vdisplay < 5)
16455 return MODE_V_ILLEGAL;
16457 if (mode->htotal - mode->hdisplay < 32)
16458 return MODE_H_ILLEGAL;
16460 if (mode->vtotal - mode->vdisplay < 3)
16461 return MODE_V_ILLEGAL;
16467 enum drm_mode_status
16468 intel_mode_valid_max_plane_size(struct drm_i915_private *dev_priv,
16469 const struct drm_display_mode *mode)
16471 int plane_width_max, plane_height_max;
16474 * intel_mode_valid() should be
16475 * sufficient on older platforms.
16477 if (INTEL_GEN(dev_priv) < 9)
16481 * Most people will probably want a fullscreen
16482 * plane so let's not advertize modes that are
16483 * too big for that.
16485 if (INTEL_GEN(dev_priv) >= 11) {
16486 plane_width_max = 5120;
16487 plane_height_max = 4320;
16489 plane_width_max = 5120;
16490 plane_height_max = 4096;
16493 if (mode->hdisplay > plane_width_max)
16494 return MODE_H_ILLEGAL;
16496 if (mode->vdisplay > plane_height_max)
16497 return MODE_V_ILLEGAL;
16502 static const struct drm_mode_config_funcs intel_mode_funcs = {
16503 .fb_create = intel_user_framebuffer_create,
16504 .get_format_info = intel_get_format_info,
16505 .output_poll_changed = intel_fbdev_output_poll_changed,
16506 .mode_valid = intel_mode_valid,
16507 .atomic_check = intel_atomic_check,
16508 .atomic_commit = intel_atomic_commit,
16509 .atomic_state_alloc = intel_atomic_state_alloc,
16510 .atomic_state_clear = intel_atomic_state_clear,
16511 .atomic_state_free = intel_atomic_state_free,
16515 * intel_init_display_hooks - initialize the display modesetting hooks
16516 * @dev_priv: device private
16518 void intel_init_display_hooks(struct drm_i915_private *dev_priv)
16520 intel_init_cdclk_hooks(dev_priv);
16522 if (INTEL_GEN(dev_priv) >= 9) {
16523 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
16524 dev_priv->display.get_initial_plane_config =
16525 skylake_get_initial_plane_config;
16526 dev_priv->display.crtc_compute_clock =
16527 haswell_crtc_compute_clock;
16528 dev_priv->display.crtc_enable = haswell_crtc_enable;
16529 dev_priv->display.crtc_disable = haswell_crtc_disable;
16530 } else if (HAS_DDI(dev_priv)) {
16531 dev_priv->display.get_pipe_config = haswell_get_pipe_config;
16532 dev_priv->display.get_initial_plane_config =
16533 i9xx_get_initial_plane_config;
16534 dev_priv->display.crtc_compute_clock =
16535 haswell_crtc_compute_clock;
16536 dev_priv->display.crtc_enable = haswell_crtc_enable;
16537 dev_priv->display.crtc_disable = haswell_crtc_disable;
16538 } else if (HAS_PCH_SPLIT(dev_priv)) {
16539 dev_priv->display.get_pipe_config = ironlake_get_pipe_config;
16540 dev_priv->display.get_initial_plane_config =
16541 i9xx_get_initial_plane_config;
16542 dev_priv->display.crtc_compute_clock =
16543 ironlake_crtc_compute_clock;
16544 dev_priv->display.crtc_enable = ironlake_crtc_enable;
16545 dev_priv->display.crtc_disable = ironlake_crtc_disable;
16546 } else if (IS_CHERRYVIEW(dev_priv)) {
16547 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
16548 dev_priv->display.get_initial_plane_config =
16549 i9xx_get_initial_plane_config;
16550 dev_priv->display.crtc_compute_clock = chv_crtc_compute_clock;
16551 dev_priv->display.crtc_enable = valleyview_crtc_enable;
16552 dev_priv->display.crtc_disable = i9xx_crtc_disable;
16553 } else if (IS_VALLEYVIEW(dev_priv)) {
16554 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
16555 dev_priv->display.get_initial_plane_config =
16556 i9xx_get_initial_plane_config;
16557 dev_priv->display.crtc_compute_clock = vlv_crtc_compute_clock;
16558 dev_priv->display.crtc_enable = valleyview_crtc_enable;
16559 dev_priv->display.crtc_disable = i9xx_crtc_disable;
16560 } else if (IS_G4X(dev_priv)) {
16561 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
16562 dev_priv->display.get_initial_plane_config =
16563 i9xx_get_initial_plane_config;
16564 dev_priv->display.crtc_compute_clock = g4x_crtc_compute_clock;
16565 dev_priv->display.crtc_enable = i9xx_crtc_enable;
16566 dev_priv->display.crtc_disable = i9xx_crtc_disable;
16567 } else if (IS_PINEVIEW(dev_priv)) {
16568 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
16569 dev_priv->display.get_initial_plane_config =
16570 i9xx_get_initial_plane_config;
16571 dev_priv->display.crtc_compute_clock = pnv_crtc_compute_clock;
16572 dev_priv->display.crtc_enable = i9xx_crtc_enable;
16573 dev_priv->display.crtc_disable = i9xx_crtc_disable;
16574 } else if (!IS_GEN(dev_priv, 2)) {
16575 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
16576 dev_priv->display.get_initial_plane_config =
16577 i9xx_get_initial_plane_config;
16578 dev_priv->display.crtc_compute_clock = i9xx_crtc_compute_clock;
16579 dev_priv->display.crtc_enable = i9xx_crtc_enable;
16580 dev_priv->display.crtc_disable = i9xx_crtc_disable;
16582 dev_priv->display.get_pipe_config = i9xx_get_pipe_config;
16583 dev_priv->display.get_initial_plane_config =
16584 i9xx_get_initial_plane_config;
16585 dev_priv->display.crtc_compute_clock = i8xx_crtc_compute_clock;
16586 dev_priv->display.crtc_enable = i9xx_crtc_enable;
16587 dev_priv->display.crtc_disable = i9xx_crtc_disable;
16590 if (IS_GEN(dev_priv, 5)) {
16591 dev_priv->display.fdi_link_train = ironlake_fdi_link_train;
16592 } else if (IS_GEN(dev_priv, 6)) {
16593 dev_priv->display.fdi_link_train = gen6_fdi_link_train;
16594 } else if (IS_IVYBRIDGE(dev_priv)) {
16595 /* FIXME: detect B0+ stepping and use auto training */
16596 dev_priv->display.fdi_link_train = ivb_manual_fdi_link_train;
16597 } else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
16598 dev_priv->display.fdi_link_train = hsw_fdi_link_train;
16601 if (INTEL_GEN(dev_priv) >= 9)
16602 dev_priv->display.commit_modeset_enables = skl_commit_modeset_enables;
16604 dev_priv->display.commit_modeset_enables = intel_commit_modeset_enables;
16608 void intel_modeset_init_hw(struct drm_i915_private *i915)
16610 intel_update_cdclk(i915);
16611 intel_dump_cdclk_state(&i915->cdclk.hw, "Current CDCLK");
16612 i915->cdclk.logical = i915->cdclk.actual = i915->cdclk.hw;
16616 * Calculate what we think the watermarks should be for the state we've read
16617 * out of the hardware and then immediately program those watermarks so that
16618 * we ensure the hardware settings match our internal state.
16620 * We can calculate what we think WM's should be by creating a duplicate of the
16621 * current state (which was constructed during hardware readout) and running it
16622 * through the atomic check code to calculate new watermark values in the
16625 static void sanitize_watermarks(struct drm_device *dev)
16627 struct drm_i915_private *dev_priv = to_i915(dev);
16628 struct drm_atomic_state *state;
16629 struct intel_atomic_state *intel_state;
16630 struct intel_crtc *crtc;
16631 struct intel_crtc_state *crtc_state;
16632 struct drm_modeset_acquire_ctx ctx;
16636 /* Only supported on platforms that use atomic watermark design */
16637 if (!dev_priv->display.optimize_watermarks)
16641 * We need to hold connection_mutex before calling duplicate_state so
16642 * that the connector loop is protected.
16644 drm_modeset_acquire_init(&ctx, 0);
16646 ret = drm_modeset_lock_all_ctx(dev, &ctx);
16647 if (ret == -EDEADLK) {
16648 drm_modeset_backoff(&ctx);
16650 } else if (WARN_ON(ret)) {
16654 state = drm_atomic_helper_duplicate_state(dev, &ctx);
16655 if (WARN_ON(IS_ERR(state)))
16658 intel_state = to_intel_atomic_state(state);
16661 * Hardware readout is the only time we don't want to calculate
16662 * intermediate watermarks (since we don't trust the current
16665 if (!HAS_GMCH(dev_priv))
16666 intel_state->skip_intermediate_wm = true;
16668 ret = intel_atomic_check(dev, state);
16671 * If we fail here, it means that the hardware appears to be
16672 * programmed in a way that shouldn't be possible, given our
16673 * understanding of watermark requirements. This might mean a
16674 * mistake in the hardware readout code or a mistake in the
16675 * watermark calculations for a given platform. Raise a WARN
16676 * so that this is noticeable.
16678 * If this actually happens, we'll have to just leave the
16679 * BIOS-programmed watermarks untouched and hope for the best.
16681 WARN(true, "Could not determine valid watermarks for inherited state\n");
16685 /* Write calculated watermark values back */
16686 for_each_new_intel_crtc_in_state(intel_state, crtc, crtc_state, i) {
16687 crtc_state->wm.need_postvbl_update = true;
16688 dev_priv->display.optimize_watermarks(intel_state, crtc_state);
16690 to_intel_crtc_state(crtc->base.state)->wm = crtc_state->wm;
16694 drm_atomic_state_put(state);
16696 drm_modeset_drop_locks(&ctx);
16697 drm_modeset_acquire_fini(&ctx);
16700 static void intel_update_fdi_pll_freq(struct drm_i915_private *dev_priv)
16702 if (IS_GEN(dev_priv, 5)) {
16704 I915_READ(FDI_PLL_BIOS_0) & FDI_PLL_FB_CLOCK_MASK;
16706 dev_priv->fdi_pll_freq = (fdi_pll_clk + 2) * 10000;
16707 } else if (IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv)) {
16708 dev_priv->fdi_pll_freq = 270000;
16713 DRM_DEBUG_DRIVER("FDI PLL freq=%d\n", dev_priv->fdi_pll_freq);
16716 static int intel_initial_commit(struct drm_device *dev)
16718 struct drm_atomic_state *state = NULL;
16719 struct drm_modeset_acquire_ctx ctx;
16720 struct drm_crtc *crtc;
16721 struct drm_crtc_state *crtc_state;
16724 state = drm_atomic_state_alloc(dev);
16728 drm_modeset_acquire_init(&ctx, 0);
16731 state->acquire_ctx = &ctx;
16733 drm_for_each_crtc(crtc, dev) {
16734 crtc_state = drm_atomic_get_crtc_state(state, crtc);
16735 if (IS_ERR(crtc_state)) {
16736 ret = PTR_ERR(crtc_state);
16740 if (crtc_state->active) {
16741 ret = drm_atomic_add_affected_planes(state, crtc);
16746 * FIXME hack to force a LUT update to avoid the
16747 * plane update forcing the pipe gamma on without
16748 * having a proper LUT loaded. Remove once we
16749 * have readout for pipe gamma enable.
16751 crtc_state->color_mgmt_changed = true;
16755 ret = drm_atomic_commit(state);
16758 if (ret == -EDEADLK) {
16759 drm_atomic_state_clear(state);
16760 drm_modeset_backoff(&ctx);
16764 drm_atomic_state_put(state);
16766 drm_modeset_drop_locks(&ctx);
16767 drm_modeset_acquire_fini(&ctx);
16772 static void intel_mode_config_init(struct drm_i915_private *i915)
16774 struct drm_mode_config *mode_config = &i915->drm.mode_config;
16776 drm_mode_config_init(&i915->drm);
16778 mode_config->min_width = 0;
16779 mode_config->min_height = 0;
16781 mode_config->preferred_depth = 24;
16782 mode_config->prefer_shadow = 1;
16784 mode_config->allow_fb_modifiers = true;
16786 mode_config->funcs = &intel_mode_funcs;
16789 * Maximum framebuffer dimensions, chosen to match
16790 * the maximum render engine surface size on gen4+.
16792 if (INTEL_GEN(i915) >= 7) {
16793 mode_config->max_width = 16384;
16794 mode_config->max_height = 16384;
16795 } else if (INTEL_GEN(i915) >= 4) {
16796 mode_config->max_width = 8192;
16797 mode_config->max_height = 8192;
16798 } else if (IS_GEN(i915, 3)) {
16799 mode_config->max_width = 4096;
16800 mode_config->max_height = 4096;
16802 mode_config->max_width = 2048;
16803 mode_config->max_height = 2048;
16806 if (IS_I845G(i915) || IS_I865G(i915)) {
16807 mode_config->cursor_width = IS_I845G(i915) ? 64 : 512;
16808 mode_config->cursor_height = 1023;
16809 } else if (IS_GEN(i915, 2)) {
16810 mode_config->cursor_width = 64;
16811 mode_config->cursor_height = 64;
16813 mode_config->cursor_width = 256;
16814 mode_config->cursor_height = 256;
16818 int intel_modeset_init(struct drm_i915_private *i915)
16820 struct drm_device *dev = &i915->drm;
16822 struct intel_crtc *crtc;
16825 i915->modeset_wq = alloc_ordered_workqueue("i915_modeset", 0);
16826 i915->flip_wq = alloc_workqueue("i915_flip", WQ_HIGHPRI |
16827 WQ_UNBOUND, WQ_UNBOUND_MAX_ACTIVE);
16829 intel_mode_config_init(i915);
16831 ret = intel_bw_init(i915);
16835 init_llist_head(&i915->atomic_helper.free_list);
16836 INIT_WORK(&i915->atomic_helper.free_work,
16837 intel_atomic_helper_free_state_worker);
16839 intel_init_quirks(i915);
16841 intel_fbc_init(i915);
16843 intel_init_pm(i915);
16845 intel_panel_sanitize_ssc(i915);
16847 intel_gmbus_setup(i915);
16849 DRM_DEBUG_KMS("%d display pipe%s available.\n",
16850 INTEL_NUM_PIPES(i915),
16851 INTEL_NUM_PIPES(i915) > 1 ? "s" : "");
16853 if (HAS_DISPLAY(i915) && INTEL_DISPLAY_ENABLED(i915)) {
16854 for_each_pipe(i915, pipe) {
16855 ret = intel_crtc_init(i915, pipe);
16857 drm_mode_config_cleanup(dev);
16863 intel_shared_dpll_init(dev);
16864 intel_update_fdi_pll_freq(i915);
16866 intel_update_czclk(i915);
16867 intel_modeset_init_hw(i915);
16869 intel_hdcp_component_init(i915);
16871 if (i915->max_cdclk_freq == 0)
16872 intel_update_max_cdclk(i915);
16874 /* Just disable it once at startup */
16875 intel_vga_disable(i915);
16876 intel_setup_outputs(i915);
16878 drm_modeset_lock_all(dev);
16879 intel_modeset_setup_hw_state(dev, dev->mode_config.acquire_ctx);
16880 drm_modeset_unlock_all(dev);
16882 for_each_intel_crtc(dev, crtc) {
16883 struct intel_initial_plane_config plane_config = {};
16889 * Note that reserving the BIOS fb up front prevents us
16890 * from stuffing other stolen allocations like the ring
16891 * on top. This prevents some ugliness at boot time, and
16892 * can even allow for smooth boot transitions if the BIOS
16893 * fb is large enough for the active pipe configuration.
16895 i915->display.get_initial_plane_config(crtc, &plane_config);
16898 * If the fb is shared between multiple heads, we'll
16899 * just get the first one.
16901 intel_find_initial_plane_obj(crtc, &plane_config);
16905 * Make sure hardware watermarks really match the state we read out.
16906 * Note that we need to do this after reconstructing the BIOS fb's
16907 * since the watermark calculation done here will use pstate->fb.
16909 if (!HAS_GMCH(i915))
16910 sanitize_watermarks(dev);
16913 * Force all active planes to recompute their states. So that on
16914 * mode_setcrtc after probe, all the intel_plane_state variables
16915 * are already calculated and there is no assert_plane warnings
16918 ret = intel_initial_commit(dev);
16920 DRM_DEBUG_KMS("Initial commit in probe failed.\n");
16925 void i830_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
16927 struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
16928 /* 640x480@60Hz, ~25175 kHz */
16929 struct dpll clock = {
16939 WARN_ON(i9xx_calc_dpll_params(48000, &clock) != 25154);
16941 DRM_DEBUG_KMS("enabling pipe %c due to force quirk (vco=%d dot=%d)\n",
16942 pipe_name(pipe), clock.vco, clock.dot);
16944 fp = i9xx_dpll_compute_fp(&clock);
16945 dpll = DPLL_DVO_2X_MODE |
16946 DPLL_VGA_MODE_DIS |
16947 ((clock.p1 - 2) << DPLL_FPA01_P1_POST_DIV_SHIFT) |
16948 PLL_P2_DIVIDE_BY_4 |
16949 PLL_REF_INPUT_DREFCLK |
16952 I915_WRITE(FP0(pipe), fp);
16953 I915_WRITE(FP1(pipe), fp);
16955 I915_WRITE(HTOTAL(pipe), (640 - 1) | ((800 - 1) << 16));
16956 I915_WRITE(HBLANK(pipe), (640 - 1) | ((800 - 1) << 16));
16957 I915_WRITE(HSYNC(pipe), (656 - 1) | ((752 - 1) << 16));
16958 I915_WRITE(VTOTAL(pipe), (480 - 1) | ((525 - 1) << 16));
16959 I915_WRITE(VBLANK(pipe), (480 - 1) | ((525 - 1) << 16));
16960 I915_WRITE(VSYNC(pipe), (490 - 1) | ((492 - 1) << 16));
16961 I915_WRITE(PIPESRC(pipe), ((640 - 1) << 16) | (480 - 1));
16964 * Apparently we need to have VGA mode enabled prior to changing
16965 * the P1/P2 dividers. Otherwise the DPLL will keep using the old
16966 * dividers, even though the register value does change.
16968 I915_WRITE(DPLL(pipe), dpll & ~DPLL_VGA_MODE_DIS);
16969 I915_WRITE(DPLL(pipe), dpll);
16971 /* Wait for the clocks to stabilize. */
16972 POSTING_READ(DPLL(pipe));
16975 /* The pixel multiplier can only be updated once the
16976 * DPLL is enabled and the clocks are stable.
16978 * So write it again.
16980 I915_WRITE(DPLL(pipe), dpll);
16982 /* We do this three times for luck */
16983 for (i = 0; i < 3 ; i++) {
16984 I915_WRITE(DPLL(pipe), dpll);
16985 POSTING_READ(DPLL(pipe));
16986 udelay(150); /* wait for warmup */
16989 I915_WRITE(PIPECONF(pipe), PIPECONF_ENABLE | PIPECONF_PROGRESSIVE);
16990 POSTING_READ(PIPECONF(pipe));
16992 intel_wait_for_pipe_scanline_moving(crtc);
16995 void i830_disable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
16997 struct intel_crtc *crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
16999 DRM_DEBUG_KMS("disabling pipe %c due to force quirk\n",
17002 WARN_ON(I915_READ(DSPCNTR(PLANE_A)) & DISPLAY_PLANE_ENABLE);
17003 WARN_ON(I915_READ(DSPCNTR(PLANE_B)) & DISPLAY_PLANE_ENABLE);
17004 WARN_ON(I915_READ(DSPCNTR(PLANE_C)) & DISPLAY_PLANE_ENABLE);
17005 WARN_ON(I915_READ(CURCNTR(PIPE_A)) & MCURSOR_MODE);
17006 WARN_ON(I915_READ(CURCNTR(PIPE_B)) & MCURSOR_MODE);
17008 I915_WRITE(PIPECONF(pipe), 0);
17009 POSTING_READ(PIPECONF(pipe));
17011 intel_wait_for_pipe_scanline_stopped(crtc);
17013 I915_WRITE(DPLL(pipe), DPLL_VGA_MODE_DIS);
17014 POSTING_READ(DPLL(pipe));
17018 intel_sanitize_plane_mapping(struct drm_i915_private *dev_priv)
17020 struct intel_crtc *crtc;
17022 if (INTEL_GEN(dev_priv) >= 4)
17025 for_each_intel_crtc(&dev_priv->drm, crtc) {
17026 struct intel_plane *plane =
17027 to_intel_plane(crtc->base.primary);
17028 struct intel_crtc *plane_crtc;
17031 if (!plane->get_hw_state(plane, &pipe))
17034 if (pipe == crtc->pipe)
17037 DRM_DEBUG_KMS("[PLANE:%d:%s] attached to the wrong pipe, disabling plane\n",
17038 plane->base.base.id, plane->base.name);
17040 plane_crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
17041 intel_plane_disable_noatomic(plane_crtc, plane);
17045 static bool intel_crtc_has_encoders(struct intel_crtc *crtc)
17047 struct drm_device *dev = crtc->base.dev;
17048 struct intel_encoder *encoder;
17050 for_each_encoder_on_crtc(dev, &crtc->base, encoder)
17056 static struct intel_connector *intel_encoder_find_connector(struct intel_encoder *encoder)
17058 struct drm_device *dev = encoder->base.dev;
17059 struct intel_connector *connector;
17061 for_each_connector_on_encoder(dev, &encoder->base, connector)
17067 static bool has_pch_trancoder(struct drm_i915_private *dev_priv,
17068 enum pipe pch_transcoder)
17070 return HAS_PCH_IBX(dev_priv) || HAS_PCH_CPT(dev_priv) ||
17071 (HAS_PCH_LPT_H(dev_priv) && pch_transcoder == PIPE_A);
17074 static void intel_sanitize_crtc(struct intel_crtc *crtc,
17075 struct drm_modeset_acquire_ctx *ctx)
17077 struct drm_device *dev = crtc->base.dev;
17078 struct drm_i915_private *dev_priv = to_i915(dev);
17079 struct intel_crtc_state *crtc_state = to_intel_crtc_state(crtc->base.state);
17080 enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
17082 /* Clear any frame start delays used for debugging left by the BIOS */
17083 if (crtc->active && !transcoder_is_dsi(cpu_transcoder)) {
17084 i915_reg_t reg = PIPECONF(cpu_transcoder);
17087 I915_READ(reg) & ~PIPECONF_FRAME_START_DELAY_MASK);
17090 if (crtc_state->base.active) {
17091 struct intel_plane *plane;
17093 /* Disable everything but the primary plane */
17094 for_each_intel_plane_on_crtc(dev, crtc, plane) {
17095 const struct intel_plane_state *plane_state =
17096 to_intel_plane_state(plane->base.state);
17098 if (plane_state->base.visible &&
17099 plane->base.type != DRM_PLANE_TYPE_PRIMARY)
17100 intel_plane_disable_noatomic(crtc, plane);
17104 * Disable any background color set by the BIOS, but enable the
17105 * gamma and CSC to match how we program our planes.
17107 if (INTEL_GEN(dev_priv) >= 9)
17108 I915_WRITE(SKL_BOTTOM_COLOR(crtc->pipe),
17109 SKL_BOTTOM_COLOR_GAMMA_ENABLE |
17110 SKL_BOTTOM_COLOR_CSC_ENABLE);
17113 /* Adjust the state of the output pipe according to whether we
17114 * have active connectors/encoders. */
17115 if (crtc_state->base.active && !intel_crtc_has_encoders(crtc))
17116 intel_crtc_disable_noatomic(&crtc->base, ctx);
17118 if (crtc_state->base.active || HAS_GMCH(dev_priv)) {
17120 * We start out with underrun reporting disabled to avoid races.
17121 * For correct bookkeeping mark this on active crtcs.
17123 * Also on gmch platforms we dont have any hardware bits to
17124 * disable the underrun reporting. Which means we need to start
17125 * out with underrun reporting disabled also on inactive pipes,
17126 * since otherwise we'll complain about the garbage we read when
17127 * e.g. coming up after runtime pm.
17129 * No protection against concurrent access is required - at
17130 * worst a fifo underrun happens which also sets this to false.
17132 crtc->cpu_fifo_underrun_disabled = true;
17134 * We track the PCH trancoder underrun reporting state
17135 * within the crtc. With crtc for pipe A housing the underrun
17136 * reporting state for PCH transcoder A, crtc for pipe B housing
17137 * it for PCH transcoder B, etc. LPT-H has only PCH transcoder A,
17138 * and marking underrun reporting as disabled for the non-existing
17139 * PCH transcoders B and C would prevent enabling the south
17140 * error interrupt (see cpt_can_enable_serr_int()).
17142 if (has_pch_trancoder(dev_priv, crtc->pipe))
17143 crtc->pch_fifo_underrun_disabled = true;
17147 static bool has_bogus_dpll_config(const struct intel_crtc_state *crtc_state)
17149 struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
17152 * Some SNB BIOSen (eg. ASUS K53SV) are known to misprogram
17153 * the hardware when a high res displays plugged in. DPLL P
17154 * divider is zero, and the pipe timings are bonkers. We'll
17155 * try to disable everything in that case.
17157 * FIXME would be nice to be able to sanitize this state
17158 * without several WARNs, but for now let's take the easy
17161 return IS_GEN(dev_priv, 6) &&
17162 crtc_state->base.active &&
17163 crtc_state->shared_dpll &&
17164 crtc_state->port_clock == 0;
17167 static void intel_sanitize_encoder(struct intel_encoder *encoder)
17169 struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
17170 struct intel_connector *connector;
17171 struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
17172 struct intel_crtc_state *crtc_state = crtc ?
17173 to_intel_crtc_state(crtc->base.state) : NULL;
17175 /* We need to check both for a crtc link (meaning that the
17176 * encoder is active and trying to read from a pipe) and the
17177 * pipe itself being active. */
17178 bool has_active_crtc = crtc_state &&
17179 crtc_state->base.active;
17181 if (crtc_state && has_bogus_dpll_config(crtc_state)) {
17182 DRM_DEBUG_KMS("BIOS has misprogrammed the hardware. Disabling pipe %c\n",
17183 pipe_name(crtc->pipe));
17184 has_active_crtc = false;
17187 connector = intel_encoder_find_connector(encoder);
17188 if (connector && !has_active_crtc) {
17189 DRM_DEBUG_KMS("[ENCODER:%d:%s] has active connectors but no active pipe!\n",
17190 encoder->base.base.id,
17191 encoder->base.name);
17193 /* Connector is active, but has no active pipe. This is
17194 * fallout from our resume register restoring. Disable
17195 * the encoder manually again. */
17197 struct drm_encoder *best_encoder;
17199 DRM_DEBUG_KMS("[ENCODER:%d:%s] manually disabled\n",
17200 encoder->base.base.id,
17201 encoder->base.name);
17203 /* avoid oopsing in case the hooks consult best_encoder */
17204 best_encoder = connector->base.state->best_encoder;
17205 connector->base.state->best_encoder = &encoder->base;
17207 if (encoder->disable)
17208 encoder->disable(encoder, crtc_state,
17209 connector->base.state);
17210 if (encoder->post_disable)
17211 encoder->post_disable(encoder, crtc_state,
17212 connector->base.state);
17214 connector->base.state->best_encoder = best_encoder;
17216 encoder->base.crtc = NULL;
17218 /* Inconsistent output/port/pipe state happens presumably due to
17219 * a bug in one of the get_hw_state functions. Or someplace else
17220 * in our code, like the register restore mess on resume. Clamp
17221 * things to off as a safer default. */
17223 connector->base.dpms = DRM_MODE_DPMS_OFF;
17224 connector->base.encoder = NULL;
17227 /* notify opregion of the sanitized encoder state */
17228 intel_opregion_notify_encoder(encoder, connector && has_active_crtc);
17230 if (INTEL_GEN(dev_priv) >= 11)
17231 icl_sanitize_encoder_pll_mapping(encoder);
17234 /* FIXME read out full plane state for all planes */
17235 static void readout_plane_state(struct drm_i915_private *dev_priv)
17237 struct intel_plane *plane;
17238 struct intel_crtc *crtc;
17240 for_each_intel_plane(&dev_priv->drm, plane) {
17241 struct intel_plane_state *plane_state =
17242 to_intel_plane_state(plane->base.state);
17243 struct intel_crtc_state *crtc_state;
17244 enum pipe pipe = PIPE_A;
17247 visible = plane->get_hw_state(plane, &pipe);
17249 crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
17250 crtc_state = to_intel_crtc_state(crtc->base.state);
17252 intel_set_plane_visible(crtc_state, plane_state, visible);
17254 DRM_DEBUG_KMS("[PLANE:%d:%s] hw state readout: %s, pipe %c\n",
17255 plane->base.base.id, plane->base.name,
17256 enableddisabled(visible), pipe_name(pipe));
17259 for_each_intel_crtc(&dev_priv->drm, crtc) {
17260 struct intel_crtc_state *crtc_state =
17261 to_intel_crtc_state(crtc->base.state);
17263 fixup_active_planes(crtc_state);
17267 static void intel_modeset_readout_hw_state(struct drm_device *dev)
17269 struct drm_i915_private *dev_priv = to_i915(dev);
17271 struct intel_crtc *crtc;
17272 struct intel_encoder *encoder;
17273 struct intel_connector *connector;
17274 struct drm_connector_list_iter conn_iter;
17277 dev_priv->active_pipes = 0;
17279 for_each_intel_crtc(dev, crtc) {
17280 struct intel_crtc_state *crtc_state =
17281 to_intel_crtc_state(crtc->base.state);
17283 __drm_atomic_helper_crtc_destroy_state(&crtc_state->base);
17284 memset(crtc_state, 0, sizeof(*crtc_state));
17285 __drm_atomic_helper_crtc_reset(&crtc->base, &crtc_state->base);
17287 crtc_state->base.active = crtc_state->base.enable =
17288 dev_priv->display.get_pipe_config(crtc, crtc_state);
17290 crtc->base.enabled = crtc_state->base.enable;
17291 crtc->active = crtc_state->base.active;
17293 if (crtc_state->base.active)
17294 dev_priv->active_pipes |= BIT(crtc->pipe);
17296 DRM_DEBUG_KMS("[CRTC:%d:%s] hw state readout: %s\n",
17297 crtc->base.base.id, crtc->base.name,
17298 enableddisabled(crtc_state->base.active));
17301 readout_plane_state(dev_priv);
17303 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
17304 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
17306 pll->on = pll->info->funcs->get_hw_state(dev_priv, pll,
17307 &pll->state.hw_state);
17309 if (IS_ELKHARTLAKE(dev_priv) && pll->on &&
17310 pll->info->id == DPLL_ID_EHL_DPLL4) {
17311 pll->wakeref = intel_display_power_get(dev_priv,
17312 POWER_DOMAIN_DPLL_DC_OFF);
17315 pll->state.crtc_mask = 0;
17316 for_each_intel_crtc(dev, crtc) {
17317 struct intel_crtc_state *crtc_state =
17318 to_intel_crtc_state(crtc->base.state);
17320 if (crtc_state->base.active &&
17321 crtc_state->shared_dpll == pll)
17322 pll->state.crtc_mask |= 1 << crtc->pipe;
17324 pll->active_mask = pll->state.crtc_mask;
17326 DRM_DEBUG_KMS("%s hw state readout: crtc_mask 0x%08x, on %i\n",
17327 pll->info->name, pll->state.crtc_mask, pll->on);
17330 for_each_intel_encoder(dev, encoder) {
17333 if (encoder->get_hw_state(encoder, &pipe)) {
17334 struct intel_crtc_state *crtc_state;
17336 crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
17337 crtc_state = to_intel_crtc_state(crtc->base.state);
17339 encoder->base.crtc = &crtc->base;
17340 encoder->get_config(encoder, crtc_state);
17342 encoder->base.crtc = NULL;
17345 DRM_DEBUG_KMS("[ENCODER:%d:%s] hw state readout: %s, pipe %c\n",
17346 encoder->base.base.id, encoder->base.name,
17347 enableddisabled(encoder->base.crtc),
17351 drm_connector_list_iter_begin(dev, &conn_iter);
17352 for_each_intel_connector_iter(connector, &conn_iter) {
17353 if (connector->get_hw_state(connector)) {
17354 struct intel_crtc_state *crtc_state;
17355 struct intel_crtc *crtc;
17357 connector->base.dpms = DRM_MODE_DPMS_ON;
17359 encoder = connector->encoder;
17360 connector->base.encoder = &encoder->base;
17362 crtc = to_intel_crtc(encoder->base.crtc);
17363 crtc_state = crtc ? to_intel_crtc_state(crtc->base.state) : NULL;
17365 if (crtc_state && crtc_state->base.active) {
17367 * This has to be done during hardware readout
17368 * because anything calling .crtc_disable may
17369 * rely on the connector_mask being accurate.
17371 crtc_state->base.connector_mask |=
17372 drm_connector_mask(&connector->base);
17373 crtc_state->base.encoder_mask |=
17374 drm_encoder_mask(&encoder->base);
17377 connector->base.dpms = DRM_MODE_DPMS_OFF;
17378 connector->base.encoder = NULL;
17380 DRM_DEBUG_KMS("[CONNECTOR:%d:%s] hw state readout: %s\n",
17381 connector->base.base.id, connector->base.name,
17382 enableddisabled(connector->base.encoder));
17384 drm_connector_list_iter_end(&conn_iter);
17386 for_each_intel_crtc(dev, crtc) {
17387 struct intel_bw_state *bw_state =
17388 to_intel_bw_state(dev_priv->bw_obj.state);
17389 struct intel_crtc_state *crtc_state =
17390 to_intel_crtc_state(crtc->base.state);
17391 struct intel_plane *plane;
17394 memset(&crtc->base.mode, 0, sizeof(crtc->base.mode));
17395 if (crtc_state->base.active) {
17396 intel_mode_from_pipe_config(&crtc->base.mode, crtc_state);
17397 crtc->base.mode.hdisplay = crtc_state->pipe_src_w;
17398 crtc->base.mode.vdisplay = crtc_state->pipe_src_h;
17399 intel_mode_from_pipe_config(&crtc_state->base.adjusted_mode, crtc_state);
17400 WARN_ON(drm_atomic_set_mode_for_crtc(&crtc_state->base, &crtc->base.mode));
17403 * The initial mode needs to be set in order to keep
17404 * the atomic core happy. It wants a valid mode if the
17405 * crtc's enabled, so we do the above call.
17407 * But we don't set all the derived state fully, hence
17408 * set a flag to indicate that a full recalculation is
17409 * needed on the next commit.
17411 crtc_state->base.mode.private_flags = I915_MODE_FLAG_INHERITED;
17413 intel_crtc_compute_pixel_rate(crtc_state);
17415 intel_crtc_update_active_timings(crtc_state);
17418 for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane) {
17419 const struct intel_plane_state *plane_state =
17420 to_intel_plane_state(plane->base.state);
17423 * FIXME don't have the fb yet, so can't
17424 * use intel_plane_data_rate() :(
17426 if (plane_state->base.visible)
17427 crtc_state->data_rate[plane->id] =
17428 4 * crtc_state->pixel_rate;
17430 * FIXME don't have the fb yet, so can't
17431 * use plane->min_cdclk() :(
17433 if (plane_state->base.visible && plane->min_cdclk) {
17434 if (crtc_state->double_wide ||
17435 INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
17436 crtc_state->min_cdclk[plane->id] =
17437 DIV_ROUND_UP(crtc_state->pixel_rate, 2);
17439 crtc_state->min_cdclk[plane->id] =
17440 crtc_state->pixel_rate;
17442 DRM_DEBUG_KMS("[PLANE:%d:%s] min_cdclk %d kHz\n",
17443 plane->base.base.id, plane->base.name,
17444 crtc_state->min_cdclk[plane->id]);
17447 if (crtc_state->base.active) {
17448 min_cdclk = intel_crtc_compute_min_cdclk(crtc_state);
17449 if (WARN_ON(min_cdclk < 0))
17453 dev_priv->min_cdclk[crtc->pipe] = min_cdclk;
17454 dev_priv->min_voltage_level[crtc->pipe] =
17455 crtc_state->min_voltage_level;
17457 intel_bw_crtc_update(bw_state, crtc_state);
17459 intel_pipe_config_sanity_check(dev_priv, crtc_state);
17464 get_encoder_power_domains(struct drm_i915_private *dev_priv)
17466 struct intel_encoder *encoder;
17468 for_each_intel_encoder(&dev_priv->drm, encoder) {
17469 struct intel_crtc_state *crtc_state;
17471 if (!encoder->get_power_domains)
17475 * MST-primary and inactive encoders don't have a crtc state
17476 * and neither of these require any power domain references.
17478 if (!encoder->base.crtc)
17481 crtc_state = to_intel_crtc_state(encoder->base.crtc->state);
17482 encoder->get_power_domains(encoder, crtc_state);
17486 static void intel_early_display_was(struct drm_i915_private *dev_priv)
17488 /* Display WA #1185 WaDisableDARBFClkGating:cnl,glk */
17489 if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv))
17490 I915_WRITE(GEN9_CLKGATE_DIS_0, I915_READ(GEN9_CLKGATE_DIS_0) |
17493 if (IS_HASWELL(dev_priv)) {
17495 * WaRsPkgCStateDisplayPMReq:hsw
17496 * System hang if this isn't done before disabling all planes!
17498 I915_WRITE(CHICKEN_PAR1_1,
17499 I915_READ(CHICKEN_PAR1_1) | FORCE_ARB_IDLE_PLANES);
17503 static void ibx_sanitize_pch_hdmi_port(struct drm_i915_private *dev_priv,
17504 enum port port, i915_reg_t hdmi_reg)
17506 u32 val = I915_READ(hdmi_reg);
17508 if (val & SDVO_ENABLE ||
17509 (val & SDVO_PIPE_SEL_MASK) == SDVO_PIPE_SEL(PIPE_A))
17512 DRM_DEBUG_KMS("Sanitizing transcoder select for HDMI %c\n",
17515 val &= ~SDVO_PIPE_SEL_MASK;
17516 val |= SDVO_PIPE_SEL(PIPE_A);
17518 I915_WRITE(hdmi_reg, val);
17521 static void ibx_sanitize_pch_dp_port(struct drm_i915_private *dev_priv,
17522 enum port port, i915_reg_t dp_reg)
17524 u32 val = I915_READ(dp_reg);
17526 if (val & DP_PORT_EN ||
17527 (val & DP_PIPE_SEL_MASK) == DP_PIPE_SEL(PIPE_A))
17530 DRM_DEBUG_KMS("Sanitizing transcoder select for DP %c\n",
17533 val &= ~DP_PIPE_SEL_MASK;
17534 val |= DP_PIPE_SEL(PIPE_A);
17536 I915_WRITE(dp_reg, val);
17539 static void ibx_sanitize_pch_ports(struct drm_i915_private *dev_priv)
17542 * The BIOS may select transcoder B on some of the PCH
17543 * ports even it doesn't enable the port. This would trip
17544 * assert_pch_dp_disabled() and assert_pch_hdmi_disabled().
17545 * Sanitize the transcoder select bits to prevent that. We
17546 * assume that the BIOS never actually enabled the port,
17547 * because if it did we'd actually have to toggle the port
17548 * on and back off to make the transcoder A select stick
17549 * (see. intel_dp_link_down(), intel_disable_hdmi(),
17550 * intel_disable_sdvo()).
17552 ibx_sanitize_pch_dp_port(dev_priv, PORT_B, PCH_DP_B);
17553 ibx_sanitize_pch_dp_port(dev_priv, PORT_C, PCH_DP_C);
17554 ibx_sanitize_pch_dp_port(dev_priv, PORT_D, PCH_DP_D);
17556 /* PCH SDVOB multiplex with HDMIB */
17557 ibx_sanitize_pch_hdmi_port(dev_priv, PORT_B, PCH_HDMIB);
17558 ibx_sanitize_pch_hdmi_port(dev_priv, PORT_C, PCH_HDMIC);
17559 ibx_sanitize_pch_hdmi_port(dev_priv, PORT_D, PCH_HDMID);
17562 /* Scan out the current hw modeset state,
17563 * and sanitizes it to the current state
17566 intel_modeset_setup_hw_state(struct drm_device *dev,
17567 struct drm_modeset_acquire_ctx *ctx)
17569 struct drm_i915_private *dev_priv = to_i915(dev);
17570 struct intel_crtc_state *crtc_state;
17571 struct intel_encoder *encoder;
17572 struct intel_crtc *crtc;
17573 intel_wakeref_t wakeref;
17576 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_INIT);
17578 intel_early_display_was(dev_priv);
17579 intel_modeset_readout_hw_state(dev);
17581 /* HW state is read out, now we need to sanitize this mess. */
17583 /* Sanitize the TypeC port mode upfront, encoders depend on this */
17584 for_each_intel_encoder(dev, encoder) {
17585 enum phy phy = intel_port_to_phy(dev_priv, encoder->port);
17587 /* We need to sanitize only the MST primary port. */
17588 if (encoder->type != INTEL_OUTPUT_DP_MST &&
17589 intel_phy_is_tc(dev_priv, phy))
17590 intel_tc_port_sanitize(enc_to_dig_port(&encoder->base));
17593 get_encoder_power_domains(dev_priv);
17595 if (HAS_PCH_IBX(dev_priv))
17596 ibx_sanitize_pch_ports(dev_priv);
17599 * intel_sanitize_plane_mapping() may need to do vblank
17600 * waits, so we need vblank interrupts restored beforehand.
17602 for_each_intel_crtc(&dev_priv->drm, crtc) {
17603 crtc_state = to_intel_crtc_state(crtc->base.state);
17605 drm_crtc_vblank_reset(&crtc->base);
17607 if (crtc_state->base.active)
17608 intel_crtc_vblank_on(crtc_state);
17611 intel_sanitize_plane_mapping(dev_priv);
17613 for_each_intel_encoder(dev, encoder)
17614 intel_sanitize_encoder(encoder);
17616 for_each_intel_crtc(&dev_priv->drm, crtc) {
17617 crtc_state = to_intel_crtc_state(crtc->base.state);
17618 intel_sanitize_crtc(crtc, ctx);
17619 intel_dump_pipe_config(crtc_state, NULL, "[setup_hw_state]");
17622 intel_modeset_update_connector_atomic_state(dev);
17624 for (i = 0; i < dev_priv->num_shared_dpll; i++) {
17625 struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i];
17627 if (!pll->on || pll->active_mask)
17630 DRM_DEBUG_KMS("%s enabled but not in use, disabling\n",
17633 pll->info->funcs->disable(dev_priv, pll);
17637 if (IS_G4X(dev_priv)) {
17638 g4x_wm_get_hw_state(dev_priv);
17639 g4x_wm_sanitize(dev_priv);
17640 } else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
17641 vlv_wm_get_hw_state(dev_priv);
17642 vlv_wm_sanitize(dev_priv);
17643 } else if (INTEL_GEN(dev_priv) >= 9) {
17644 skl_wm_get_hw_state(dev_priv);
17645 } else if (HAS_PCH_SPLIT(dev_priv)) {
17646 ilk_wm_get_hw_state(dev_priv);
17649 for_each_intel_crtc(dev, crtc) {
17652 crtc_state = to_intel_crtc_state(crtc->base.state);
17653 put_domains = modeset_get_crtc_power_domains(crtc_state);
17654 if (WARN_ON(put_domains))
17655 modeset_put_power_domains(dev_priv, put_domains);
17658 intel_display_power_put(dev_priv, POWER_DOMAIN_INIT, wakeref);
17660 intel_fbc_init_pipe_state(dev_priv);
17663 void intel_display_resume(struct drm_device *dev)
17665 struct drm_i915_private *dev_priv = to_i915(dev);
17666 struct drm_atomic_state *state = dev_priv->modeset_restore_state;
17667 struct drm_modeset_acquire_ctx ctx;
17670 dev_priv->modeset_restore_state = NULL;
17672 state->acquire_ctx = &ctx;
17674 drm_modeset_acquire_init(&ctx, 0);
17677 ret = drm_modeset_lock_all_ctx(dev, &ctx);
17678 if (ret != -EDEADLK)
17681 drm_modeset_backoff(&ctx);
17685 ret = __intel_display_resume(dev, state, &ctx);
17687 intel_enable_ipc(dev_priv);
17688 drm_modeset_drop_locks(&ctx);
17689 drm_modeset_acquire_fini(&ctx);
17692 DRM_ERROR("Restoring old state failed with %i\n", ret);
17694 drm_atomic_state_put(state);
17697 static void intel_hpd_poll_fini(struct drm_i915_private *i915)
17699 struct intel_connector *connector;
17700 struct drm_connector_list_iter conn_iter;
17702 /* Kill all the work that may have been queued by hpd. */
17703 drm_connector_list_iter_begin(&i915->drm, &conn_iter);
17704 for_each_intel_connector_iter(connector, &conn_iter) {
17705 if (connector->modeset_retry_work.func)
17706 cancel_work_sync(&connector->modeset_retry_work);
17707 if (connector->hdcp.shim) {
17708 cancel_delayed_work_sync(&connector->hdcp.check_work);
17709 cancel_work_sync(&connector->hdcp.prop_work);
17712 drm_connector_list_iter_end(&conn_iter);
17715 void intel_modeset_driver_remove(struct drm_i915_private *i915)
17717 flush_workqueue(i915->flip_wq);
17718 flush_workqueue(i915->modeset_wq);
17720 flush_work(&i915->atomic_helper.free_work);
17721 WARN_ON(!llist_empty(&i915->atomic_helper.free_list));
17724 * Interrupts and polling as the first thing to avoid creating havoc.
17725 * Too much stuff here (turning of connectors, ...) would
17726 * experience fancy races otherwise.
17728 intel_irq_uninstall(i915);
17731 * Due to the hpd irq storm handling the hotplug work can re-arm the
17732 * poll handlers. Hence disable polling after hpd handling is shut down.
17734 intel_hpd_poll_fini(i915);
17736 /* poll work can call into fbdev, hence clean that up afterwards */
17737 intel_fbdev_fini(i915);
17739 intel_unregister_dsm_handler();
17741 intel_fbc_global_disable(i915);
17743 /* flush any delayed tasks or pending work */
17744 flush_scheduled_work();
17746 intel_hdcp_component_fini(i915);
17748 drm_mode_config_cleanup(&i915->drm);
17750 intel_overlay_cleanup(i915);
17752 intel_gmbus_teardown(i915);
17754 destroy_workqueue(i915->flip_wq);
17755 destroy_workqueue(i915->modeset_wq);
17757 intel_fbc_cleanup_cfb(i915);
17760 #if IS_ENABLED(CONFIG_DRM_I915_CAPTURE_ERROR)
17762 struct intel_display_error_state {
17764 u32 power_well_driver;
17766 struct intel_cursor_error_state {
17771 } cursor[I915_MAX_PIPES];
17773 struct intel_pipe_error_state {
17774 bool power_domain_on;
17777 } pipe[I915_MAX_PIPES];
17779 struct intel_plane_error_state {
17787 } plane[I915_MAX_PIPES];
17789 struct intel_transcoder_error_state {
17791 bool power_domain_on;
17792 enum transcoder cpu_transcoder;
17805 struct intel_display_error_state *
17806 intel_display_capture_error_state(struct drm_i915_private *dev_priv)
17808 struct intel_display_error_state *error;
17809 int transcoders[] = {
17818 BUILD_BUG_ON(ARRAY_SIZE(transcoders) != ARRAY_SIZE(error->transcoder));
17820 if (!HAS_DISPLAY(dev_priv) || !INTEL_DISPLAY_ENABLED(dev_priv))
17823 error = kzalloc(sizeof(*error), GFP_ATOMIC);
17827 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
17828 error->power_well_driver = I915_READ(HSW_PWR_WELL_CTL2);
17830 for_each_pipe(dev_priv, i) {
17831 error->pipe[i].power_domain_on =
17832 __intel_display_power_is_enabled(dev_priv,
17833 POWER_DOMAIN_PIPE(i));
17834 if (!error->pipe[i].power_domain_on)
17837 error->cursor[i].control = I915_READ(CURCNTR(i));
17838 error->cursor[i].position = I915_READ(CURPOS(i));
17839 error->cursor[i].base = I915_READ(CURBASE(i));
17841 error->plane[i].control = I915_READ(DSPCNTR(i));
17842 error->plane[i].stride = I915_READ(DSPSTRIDE(i));
17843 if (INTEL_GEN(dev_priv) <= 3) {
17844 error->plane[i].size = I915_READ(DSPSIZE(i));
17845 error->plane[i].pos = I915_READ(DSPPOS(i));
17847 if (INTEL_GEN(dev_priv) <= 7 && !IS_HASWELL(dev_priv))
17848 error->plane[i].addr = I915_READ(DSPADDR(i));
17849 if (INTEL_GEN(dev_priv) >= 4) {
17850 error->plane[i].surface = I915_READ(DSPSURF(i));
17851 error->plane[i].tile_offset = I915_READ(DSPTILEOFF(i));
17854 error->pipe[i].source = I915_READ(PIPESRC(i));
17856 if (HAS_GMCH(dev_priv))
17857 error->pipe[i].stat = I915_READ(PIPESTAT(i));
17860 for (i = 0; i < ARRAY_SIZE(error->transcoder); i++) {
17861 enum transcoder cpu_transcoder = transcoders[i];
17863 if (!INTEL_INFO(dev_priv)->trans_offsets[cpu_transcoder])
17866 error->transcoder[i].available = true;
17867 error->transcoder[i].power_domain_on =
17868 __intel_display_power_is_enabled(dev_priv,
17869 POWER_DOMAIN_TRANSCODER(cpu_transcoder));
17870 if (!error->transcoder[i].power_domain_on)
17873 error->transcoder[i].cpu_transcoder = cpu_transcoder;
17875 error->transcoder[i].conf = I915_READ(PIPECONF(cpu_transcoder));
17876 error->transcoder[i].htotal = I915_READ(HTOTAL(cpu_transcoder));
17877 error->transcoder[i].hblank = I915_READ(HBLANK(cpu_transcoder));
17878 error->transcoder[i].hsync = I915_READ(HSYNC(cpu_transcoder));
17879 error->transcoder[i].vtotal = I915_READ(VTOTAL(cpu_transcoder));
17880 error->transcoder[i].vblank = I915_READ(VBLANK(cpu_transcoder));
17881 error->transcoder[i].vsync = I915_READ(VSYNC(cpu_transcoder));
17887 #define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__)
17890 intel_display_print_error_state(struct drm_i915_error_state_buf *m,
17891 struct intel_display_error_state *error)
17893 struct drm_i915_private *dev_priv = m->i915;
17899 err_printf(m, "Num Pipes: %d\n", INTEL_NUM_PIPES(dev_priv));
17900 if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
17901 err_printf(m, "PWR_WELL_CTL2: %08x\n",
17902 error->power_well_driver);
17903 for_each_pipe(dev_priv, i) {
17904 err_printf(m, "Pipe [%d]:\n", i);
17905 err_printf(m, " Power: %s\n",
17906 onoff(error->pipe[i].power_domain_on));
17907 err_printf(m, " SRC: %08x\n", error->pipe[i].source);
17908 err_printf(m, " STAT: %08x\n", error->pipe[i].stat);
17910 err_printf(m, "Plane [%d]:\n", i);
17911 err_printf(m, " CNTR: %08x\n", error->plane[i].control);
17912 err_printf(m, " STRIDE: %08x\n", error->plane[i].stride);
17913 if (INTEL_GEN(dev_priv) <= 3) {
17914 err_printf(m, " SIZE: %08x\n", error->plane[i].size);
17915 err_printf(m, " POS: %08x\n", error->plane[i].pos);
17917 if (INTEL_GEN(dev_priv) <= 7 && !IS_HASWELL(dev_priv))
17918 err_printf(m, " ADDR: %08x\n", error->plane[i].addr);
17919 if (INTEL_GEN(dev_priv) >= 4) {
17920 err_printf(m, " SURF: %08x\n", error->plane[i].surface);
17921 err_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset);
17924 err_printf(m, "Cursor [%d]:\n", i);
17925 err_printf(m, " CNTR: %08x\n", error->cursor[i].control);
17926 err_printf(m, " POS: %08x\n", error->cursor[i].position);
17927 err_printf(m, " BASE: %08x\n", error->cursor[i].base);
17930 for (i = 0; i < ARRAY_SIZE(error->transcoder); i++) {
17931 if (!error->transcoder[i].available)
17934 err_printf(m, "CPU transcoder: %s\n",
17935 transcoder_name(error->transcoder[i].cpu_transcoder));
17936 err_printf(m, " Power: %s\n",
17937 onoff(error->transcoder[i].power_domain_on));
17938 err_printf(m, " CONF: %08x\n", error->transcoder[i].conf);
17939 err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal);
17940 err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank);
17941 err_printf(m, " HSYNC: %08x\n", error->transcoder[i].hsync);
17942 err_printf(m, " VTOTAL: %08x\n", error->transcoder[i].vtotal);
17943 err_printf(m, " VBLANK: %08x\n", error->transcoder[i].vblank);
17944 err_printf(m, " VSYNC: %08x\n", error->transcoder[i].vsync);