2 * Copyright (c) 2011-2016 Synaptics Incorporated
3 * Copyright (c) 2011 Unixphere
5 * This driver provides the core support for a single RMI4-based device.
7 * The RMI4 specification can be found here (URL split for line length):
9 * http://www.synaptics.com/sites/default/files/
10 * 511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
12 * This program is free software; you can redistribute it and/or modify it
13 * under the terms of the GNU General Public License version 2 as published by
14 * the Free Software Foundation.
17 #include <linux/bitmap.h>
18 #include <linux/delay.h>
20 #include <linux/irq.h>
22 #include <linux/slab.h>
24 #include <linux/irqdomain.h>
25 #include <uapi/linux/input.h>
26 #include <linux/rmi.h>
28 #include "rmi_driver.h"
30 #define HAS_NONSTANDARD_PDT_MASK 0x40
31 #define RMI4_MAX_PAGE 0xff
32 #define RMI4_PAGE_SIZE 0x100
33 #define RMI4_PAGE_MASK 0xFF00
35 #define RMI_DEVICE_RESET_CMD 0x01
36 #define DEFAULT_RESET_DELAY_MS 100
38 void rmi_free_function_list(struct rmi_device *rmi_dev)
40 struct rmi_function *fn, *tmp;
41 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
43 rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Freeing function list\n");
45 /* Doing it in the reverse order so F01 will be removed last */
46 list_for_each_entry_safe_reverse(fn, tmp,
47 &data->function_list, node) {
49 rmi_unregister_function(fn);
52 devm_kfree(&rmi_dev->dev, data->irq_memory);
53 data->irq_memory = NULL;
54 data->irq_status = NULL;
55 data->fn_irq_bits = NULL;
56 data->current_irq_mask = NULL;
57 data->new_irq_mask = NULL;
59 data->f01_container = NULL;
60 data->f34_container = NULL;
63 static int reset_one_function(struct rmi_function *fn)
65 struct rmi_function_handler *fh;
68 if (!fn || !fn->dev.driver)
71 fh = to_rmi_function_handler(fn->dev.driver);
73 retval = fh->reset(fn);
75 dev_err(&fn->dev, "Reset failed with code %d.\n",
82 static int configure_one_function(struct rmi_function *fn)
84 struct rmi_function_handler *fh;
87 if (!fn || !fn->dev.driver)
90 fh = to_rmi_function_handler(fn->dev.driver);
92 retval = fh->config(fn);
94 dev_err(&fn->dev, "Config failed with code %d.\n",
101 static int rmi_driver_process_reset_requests(struct rmi_device *rmi_dev)
103 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
104 struct rmi_function *entry;
107 list_for_each_entry(entry, &data->function_list, node) {
108 retval = reset_one_function(entry);
116 static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev)
118 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
119 struct rmi_function *entry;
122 list_for_each_entry(entry, &data->function_list, node) {
123 retval = configure_one_function(entry);
131 static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
133 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
134 struct device *dev = &rmi_dev->dev;
141 if (!data->attn_data.data) {
142 error = rmi_read_block(rmi_dev,
143 data->f01_container->fd.data_base_addr + 1,
144 data->irq_status, data->num_of_irq_regs);
146 dev_err(dev, "Failed to read irqs, code=%d\n", error);
151 mutex_lock(&data->irq_mutex);
152 bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask,
155 * At this point, irq_status has all bits that are set in the
156 * interrupt status register and are enabled.
158 mutex_unlock(&data->irq_mutex);
160 for_each_set_bit(i, data->irq_status, data->irq_count)
161 handle_nested_irq(irq_find_mapping(data->irqdomain, i));
164 input_sync(data->input);
169 void rmi_set_attn_data(struct rmi_device *rmi_dev, unsigned long irq_status,
170 void *data, size_t size)
172 struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
173 struct rmi4_attn_data attn_data;
176 if (!drvdata->enabled)
179 fifo_data = kmemdup(data, size, GFP_ATOMIC);
183 attn_data.irq_status = irq_status;
184 attn_data.size = size;
185 attn_data.data = fifo_data;
187 kfifo_put(&drvdata->attn_fifo, attn_data);
189 EXPORT_SYMBOL_GPL(rmi_set_attn_data);
191 static irqreturn_t rmi_irq_fn(int irq, void *dev_id)
193 struct rmi_device *rmi_dev = dev_id;
194 struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
195 struct rmi4_attn_data attn_data = {0};
198 count = kfifo_get(&drvdata->attn_fifo, &attn_data);
200 *(drvdata->irq_status) = attn_data.irq_status;
201 drvdata->attn_data = attn_data;
204 ret = rmi_process_interrupt_requests(rmi_dev);
206 rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev,
207 "Failed to process interrupt request: %d\n", ret);
210 kfree(attn_data.data);
211 attn_data.data = NULL;
214 if (!kfifo_is_empty(&drvdata->attn_fifo))
215 return rmi_irq_fn(irq, dev_id);
220 static int rmi_irq_init(struct rmi_device *rmi_dev)
222 struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
223 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
224 int irq_flags = irq_get_trigger_type(pdata->irq);
228 irq_flags = IRQF_TRIGGER_LOW;
230 ret = devm_request_threaded_irq(&rmi_dev->dev, pdata->irq, NULL,
231 rmi_irq_fn, irq_flags | IRQF_ONESHOT,
232 dev_driver_string(rmi_dev->xport->dev),
235 dev_err(&rmi_dev->dev, "Failed to register interrupt %d\n",
241 data->enabled = true;
246 struct rmi_function *rmi_find_function(struct rmi_device *rmi_dev, u8 number)
248 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
249 struct rmi_function *entry;
251 list_for_each_entry(entry, &data->function_list, node) {
252 if (entry->fd.function_number == number)
259 static int suspend_one_function(struct rmi_function *fn)
261 struct rmi_function_handler *fh;
264 if (!fn || !fn->dev.driver)
267 fh = to_rmi_function_handler(fn->dev.driver);
269 retval = fh->suspend(fn);
271 dev_err(&fn->dev, "Suspend failed with code %d.\n",
278 static int rmi_suspend_functions(struct rmi_device *rmi_dev)
280 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
281 struct rmi_function *entry;
284 list_for_each_entry(entry, &data->function_list, node) {
285 retval = suspend_one_function(entry);
293 static int resume_one_function(struct rmi_function *fn)
295 struct rmi_function_handler *fh;
298 if (!fn || !fn->dev.driver)
301 fh = to_rmi_function_handler(fn->dev.driver);
303 retval = fh->resume(fn);
305 dev_err(&fn->dev, "Resume failed with code %d.\n",
312 static int rmi_resume_functions(struct rmi_device *rmi_dev)
314 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
315 struct rmi_function *entry;
318 list_for_each_entry(entry, &data->function_list, node) {
319 retval = resume_one_function(entry);
327 int rmi_enable_sensor(struct rmi_device *rmi_dev)
331 retval = rmi_driver_process_config_requests(rmi_dev);
335 return rmi_process_interrupt_requests(rmi_dev);
339 * rmi_driver_set_input_params - set input device id and other data.
341 * @rmi_dev: Pointer to an RMI device
342 * @input: Pointer to input device
345 static int rmi_driver_set_input_params(struct rmi_device *rmi_dev,
346 struct input_dev *input)
348 input->name = SYNAPTICS_INPUT_DEVICE_NAME;
349 input->id.vendor = SYNAPTICS_VENDOR_ID;
350 input->id.bustype = BUS_RMI;
354 static void rmi_driver_set_input_name(struct rmi_device *rmi_dev,
355 struct input_dev *input)
357 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
358 const char *device_name = rmi_f01_get_product_ID(data->f01_container);
361 name = devm_kasprintf(&rmi_dev->dev, GFP_KERNEL,
362 "Synaptics %s", device_name);
369 static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev,
373 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
374 struct device *dev = &rmi_dev->dev;
376 mutex_lock(&data->irq_mutex);
377 bitmap_or(data->new_irq_mask,
378 data->current_irq_mask, mask, data->irq_count);
380 error = rmi_write_block(rmi_dev,
381 data->f01_container->fd.control_base_addr + 1,
382 data->new_irq_mask, data->num_of_irq_regs);
384 dev_err(dev, "%s: Failed to change enabled interrupts!",
388 bitmap_copy(data->current_irq_mask, data->new_irq_mask,
389 data->num_of_irq_regs);
392 mutex_unlock(&data->irq_mutex);
396 static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev,
400 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
401 struct device *dev = &rmi_dev->dev;
403 mutex_lock(&data->irq_mutex);
404 bitmap_andnot(data->new_irq_mask,
405 data->current_irq_mask, mask, data->irq_count);
407 error = rmi_write_block(rmi_dev,
408 data->f01_container->fd.control_base_addr + 1,
409 data->new_irq_mask, data->num_of_irq_regs);
411 dev_err(dev, "%s: Failed to change enabled interrupts!",
415 bitmap_copy(data->current_irq_mask, data->new_irq_mask,
416 data->num_of_irq_regs);
419 mutex_unlock(&data->irq_mutex);
423 static int rmi_driver_reset_handler(struct rmi_device *rmi_dev)
425 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
429 * Can get called before the driver is fully ready to deal with
432 if (!data || !data->f01_container) {
433 dev_warn(&rmi_dev->dev,
434 "Not ready to handle reset yet!\n");
438 error = rmi_read_block(rmi_dev,
439 data->f01_container->fd.control_base_addr + 1,
440 data->current_irq_mask, data->num_of_irq_regs);
442 dev_err(&rmi_dev->dev, "%s: Failed to read current IRQ mask.\n",
447 error = rmi_driver_process_reset_requests(rmi_dev);
451 error = rmi_driver_process_config_requests(rmi_dev);
458 static int rmi_read_pdt_entry(struct rmi_device *rmi_dev,
459 struct pdt_entry *entry, u16 pdt_address)
461 u8 buf[RMI_PDT_ENTRY_SIZE];
464 error = rmi_read_block(rmi_dev, pdt_address, buf, RMI_PDT_ENTRY_SIZE);
466 dev_err(&rmi_dev->dev, "Read PDT entry at %#06x failed, code: %d.\n",
471 entry->page_start = pdt_address & RMI4_PAGE_MASK;
472 entry->query_base_addr = buf[0];
473 entry->command_base_addr = buf[1];
474 entry->control_base_addr = buf[2];
475 entry->data_base_addr = buf[3];
476 entry->interrupt_source_count = buf[4] & RMI_PDT_INT_SOURCE_COUNT_MASK;
477 entry->function_version = (buf[4] & RMI_PDT_FUNCTION_VERSION_MASK) >> 5;
478 entry->function_number = buf[5];
483 static void rmi_driver_copy_pdt_to_fd(const struct pdt_entry *pdt,
484 struct rmi_function_descriptor *fd)
486 fd->query_base_addr = pdt->query_base_addr + pdt->page_start;
487 fd->command_base_addr = pdt->command_base_addr + pdt->page_start;
488 fd->control_base_addr = pdt->control_base_addr + pdt->page_start;
489 fd->data_base_addr = pdt->data_base_addr + pdt->page_start;
490 fd->function_number = pdt->function_number;
491 fd->interrupt_source_count = pdt->interrupt_source_count;
492 fd->function_version = pdt->function_version;
495 #define RMI_SCAN_CONTINUE 0
496 #define RMI_SCAN_DONE 1
498 static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
502 int (*callback)(struct rmi_device *rmi_dev,
504 const struct pdt_entry *entry))
506 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
507 struct pdt_entry pdt_entry;
508 u16 page_start = RMI4_PAGE_SIZE * page;
509 u16 pdt_start = page_start + PDT_START_SCAN_LOCATION;
510 u16 pdt_end = page_start + PDT_END_SCAN_LOCATION;
515 for (addr = pdt_start; addr >= pdt_end; addr -= RMI_PDT_ENTRY_SIZE) {
516 error = rmi_read_pdt_entry(rmi_dev, &pdt_entry, addr);
520 if (RMI4_END_OF_PDT(pdt_entry.function_number))
523 retval = callback(rmi_dev, ctx, &pdt_entry);
524 if (retval != RMI_SCAN_CONTINUE)
529 * Count number of empty PDT pages. If a gap of two pages
530 * or more is found, stop scanning.
532 if (addr == pdt_start)
537 return (data->bootloader_mode || *empty_pages >= 2) ?
538 RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
541 int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
542 int (*callback)(struct rmi_device *rmi_dev,
543 void *ctx, const struct pdt_entry *entry))
547 int retval = RMI_SCAN_DONE;
549 for (page = 0; page <= RMI4_MAX_PAGE; page++) {
550 retval = rmi_scan_pdt_page(rmi_dev, page, &empty_pages,
552 if (retval != RMI_SCAN_CONTINUE)
556 return retval < 0 ? retval : 0;
559 int rmi_read_register_desc(struct rmi_device *d, u16 addr,
560 struct rmi_register_descriptor *rdesc)
563 u8 size_presence_reg;
565 int presense_offset = 1;
574 * The first register of the register descriptor is the size of
575 * the register descriptor's presense register.
577 ret = rmi_read(d, addr, &size_presence_reg);
582 if (size_presence_reg < 0 || size_presence_reg > 35)
585 memset(buf, 0, sizeof(buf));
588 * The presence register contains the size of the register structure
589 * and a bitmap which identified which packet registers are present
590 * for this particular register type (ie query, control, or data).
592 ret = rmi_read_block(d, addr, buf, size_presence_reg);
599 rdesc->struct_size = buf[1] | (buf[2] << 8);
601 rdesc->struct_size = buf[0];
604 for (i = presense_offset; i < size_presence_reg; i++) {
605 for (b = 0; b < 8; b++) {
606 if (buf[i] & (0x1 << b))
607 bitmap_set(rdesc->presense_map, map_offset, 1);
612 rdesc->num_registers = bitmap_weight(rdesc->presense_map,
613 RMI_REG_DESC_PRESENSE_BITS);
615 rdesc->registers = devm_kcalloc(&d->dev,
616 rdesc->num_registers,
617 sizeof(struct rmi_register_desc_item),
619 if (!rdesc->registers)
623 * Allocate a temporary buffer to hold the register structure.
624 * I'm not using devm_kzalloc here since it will not be retained
625 * after exiting this function
627 struct_buf = kzalloc(rdesc->struct_size, GFP_KERNEL);
632 * The register structure contains information about every packet
633 * register of this type. This includes the size of the packet
634 * register and a bitmap of all subpackets contained in the packet
637 ret = rmi_read_block(d, addr, struct_buf, rdesc->struct_size);
639 goto free_struct_buff;
641 reg = find_first_bit(rdesc->presense_map, RMI_REG_DESC_PRESENSE_BITS);
642 for (i = 0; i < rdesc->num_registers; i++) {
643 struct rmi_register_desc_item *item = &rdesc->registers[i];
644 int reg_size = struct_buf[offset];
648 reg_size = struct_buf[offset] |
649 (struct_buf[offset + 1] << 8);
654 reg_size = struct_buf[offset] |
655 (struct_buf[offset + 1] << 8) |
656 (struct_buf[offset + 2] << 16) |
657 (struct_buf[offset + 3] << 24);
662 item->reg_size = reg_size;
667 for (b = 0; b < 7; b++) {
668 if (struct_buf[offset] & (0x1 << b))
669 bitmap_set(item->subpacket_map,
673 } while (struct_buf[offset++] & 0x80);
675 item->num_subpackets = bitmap_weight(item->subpacket_map,
676 RMI_REG_DESC_SUBPACKET_BITS);
678 rmi_dbg(RMI_DEBUG_CORE, &d->dev,
679 "%s: reg: %d reg size: %ld subpackets: %d\n", __func__,
680 item->reg, item->reg_size, item->num_subpackets);
682 reg = find_next_bit(rdesc->presense_map,
683 RMI_REG_DESC_PRESENSE_BITS, reg + 1);
691 const struct rmi_register_desc_item *rmi_get_register_desc_item(
692 struct rmi_register_descriptor *rdesc, u16 reg)
694 const struct rmi_register_desc_item *item;
697 for (i = 0; i < rdesc->num_registers; i++) {
698 item = &rdesc->registers[i];
699 if (item->reg == reg)
706 size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc)
708 const struct rmi_register_desc_item *item;
712 for (i = 0; i < rdesc->num_registers; i++) {
713 item = &rdesc->registers[i];
714 size += item->reg_size;
719 /* Compute the register offset relative to the base address */
720 int rmi_register_desc_calc_reg_offset(
721 struct rmi_register_descriptor *rdesc, u16 reg)
723 const struct rmi_register_desc_item *item;
727 for (i = 0; i < rdesc->num_registers; i++) {
728 item = &rdesc->registers[i];
729 if (item->reg == reg)
736 bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
739 return find_next_bit(item->subpacket_map, RMI_REG_DESC_PRESENSE_BITS,
740 subpacket) == subpacket;
743 static int rmi_check_bootloader_mode(struct rmi_device *rmi_dev,
744 const struct pdt_entry *pdt)
746 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
750 if (pdt->function_number == 0x34 && pdt->function_version > 1) {
751 ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
753 dev_err(&rmi_dev->dev,
754 "Failed to read F34 status: %d.\n", ret);
759 data->bootloader_mode = true;
760 } else if (pdt->function_number == 0x01) {
761 ret = rmi_read(rmi_dev, pdt->data_base_addr, &status);
763 dev_err(&rmi_dev->dev,
764 "Failed to read F01 status: %d.\n", ret);
769 data->bootloader_mode = true;
775 static int rmi_count_irqs(struct rmi_device *rmi_dev,
776 void *ctx, const struct pdt_entry *pdt)
778 int *irq_count = ctx;
781 *irq_count += pdt->interrupt_source_count;
783 ret = rmi_check_bootloader_mode(rmi_dev, pdt);
787 return RMI_SCAN_CONTINUE;
790 int rmi_initial_reset(struct rmi_device *rmi_dev, void *ctx,
791 const struct pdt_entry *pdt)
795 if (pdt->function_number == 0x01) {
796 u16 cmd_addr = pdt->page_start + pdt->command_base_addr;
797 u8 cmd_buf = RMI_DEVICE_RESET_CMD;
798 const struct rmi_device_platform_data *pdata =
799 rmi_get_platform_data(rmi_dev);
801 if (rmi_dev->xport->ops->reset) {
802 error = rmi_dev->xport->ops->reset(rmi_dev->xport,
807 return RMI_SCAN_DONE;
810 rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Sending reset\n");
811 error = rmi_write_block(rmi_dev, cmd_addr, &cmd_buf, 1);
813 dev_err(&rmi_dev->dev,
814 "Initial reset failed. Code = %d.\n", error);
818 mdelay(pdata->reset_delay_ms ?: DEFAULT_RESET_DELAY_MS);
820 return RMI_SCAN_DONE;
823 /* F01 should always be on page 0. If we don't find it there, fail. */
824 return pdt->page_start == 0 ? RMI_SCAN_CONTINUE : -ENODEV;
827 static int rmi_create_function(struct rmi_device *rmi_dev,
828 void *ctx, const struct pdt_entry *pdt)
830 struct device *dev = &rmi_dev->dev;
831 struct rmi_driver_data *data = dev_get_drvdata(dev);
832 int *current_irq_count = ctx;
833 struct rmi_function *fn;
837 rmi_dbg(RMI_DEBUG_CORE, dev, "Initializing F%02X.\n",
838 pdt->function_number);
840 fn = kzalloc(sizeof(struct rmi_function) +
841 BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long),
844 dev_err(dev, "Failed to allocate memory for F%02X\n",
845 pdt->function_number);
849 INIT_LIST_HEAD(&fn->node);
850 rmi_driver_copy_pdt_to_fd(pdt, &fn->fd);
852 fn->rmi_dev = rmi_dev;
854 fn->num_of_irqs = pdt->interrupt_source_count;
855 fn->irq_pos = *current_irq_count;
856 *current_irq_count += fn->num_of_irqs;
858 for (i = 0; i < fn->num_of_irqs; i++)
859 set_bit(fn->irq_pos + i, fn->irq_mask);
861 error = rmi_register_function(fn);
865 if (pdt->function_number == 0x01)
866 data->f01_container = fn;
867 else if (pdt->function_number == 0x34)
868 data->f34_container = fn;
870 list_add_tail(&fn->node, &data->function_list);
872 return RMI_SCAN_CONTINUE;
875 put_device(&fn->dev);
879 void rmi_enable_irq(struct rmi_device *rmi_dev, bool clear_wake)
881 struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
882 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
883 int irq = pdata->irq;
887 mutex_lock(&data->enabled_mutex);
893 data->enabled = true;
894 if (clear_wake && device_may_wakeup(rmi_dev->xport->dev)) {
895 retval = disable_irq_wake(irq);
897 dev_warn(&rmi_dev->dev,
898 "Failed to disable irq for wake: %d\n",
903 * Call rmi_process_interrupt_requests() after enabling irq,
904 * otherwise we may lose interrupt on edge-triggered systems.
906 irq_flags = irq_get_trigger_type(pdata->irq);
907 if (irq_flags & IRQ_TYPE_EDGE_BOTH)
908 rmi_process_interrupt_requests(rmi_dev);
911 mutex_unlock(&data->enabled_mutex);
914 void rmi_disable_irq(struct rmi_device *rmi_dev, bool enable_wake)
916 struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
917 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
918 struct rmi4_attn_data attn_data = {0};
919 int irq = pdata->irq;
922 mutex_lock(&data->enabled_mutex);
927 data->enabled = false;
929 if (enable_wake && device_may_wakeup(rmi_dev->xport->dev)) {
930 retval = enable_irq_wake(irq);
932 dev_warn(&rmi_dev->dev,
933 "Failed to enable irq for wake: %d\n",
937 /* make sure the fifo is clean */
938 while (!kfifo_is_empty(&data->attn_fifo)) {
939 count = kfifo_get(&data->attn_fifo, &attn_data);
941 kfree(attn_data.data);
945 mutex_unlock(&data->enabled_mutex);
948 int rmi_driver_suspend(struct rmi_device *rmi_dev, bool enable_wake)
952 retval = rmi_suspend_functions(rmi_dev);
954 dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
957 rmi_disable_irq(rmi_dev, enable_wake);
960 EXPORT_SYMBOL_GPL(rmi_driver_suspend);
962 int rmi_driver_resume(struct rmi_device *rmi_dev, bool clear_wake)
966 rmi_enable_irq(rmi_dev, clear_wake);
968 retval = rmi_resume_functions(rmi_dev);
970 dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
975 EXPORT_SYMBOL_GPL(rmi_driver_resume);
977 static int rmi_driver_remove(struct device *dev)
979 struct rmi_device *rmi_dev = to_rmi_device(dev);
980 struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
982 rmi_disable_irq(rmi_dev, false);
984 irq_domain_remove(data->irqdomain);
985 data->irqdomain = NULL;
987 rmi_f34_remove_sysfs(rmi_dev);
988 rmi_free_function_list(rmi_dev);
994 static int rmi_driver_of_probe(struct device *dev,
995 struct rmi_device_platform_data *pdata)
999 retval = rmi_of_property_read_u32(dev, &pdata->reset_delay_ms,
1000 "syna,reset-delay-ms", 1);
1007 static inline int rmi_driver_of_probe(struct device *dev,
1008 struct rmi_device_platform_data *pdata)
1014 int rmi_probe_interrupts(struct rmi_driver_data *data)
1016 struct rmi_device *rmi_dev = data->rmi_dev;
1017 struct device *dev = &rmi_dev->dev;
1018 struct fwnode_handle *fwnode = rmi_dev->xport->dev->fwnode;
1024 * We need to count the IRQs and allocate their storage before scanning
1025 * the PDT and creating the function entries, because adding a new
1026 * function can trigger events that result in the IRQ related storage
1029 rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__);
1030 data->bootloader_mode = false;
1032 retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
1034 dev_err(dev, "IRQ counting failed with code %d.\n", retval);
1038 if (data->bootloader_mode)
1039 dev_warn(dev, "Device in bootloader mode.\n");
1041 /* Allocate and register a linear revmap irq_domain */
1042 data->irqdomain = irq_domain_create_linear(fwnode, irq_count,
1043 &irq_domain_simple_ops,
1045 if (!data->irqdomain) {
1046 dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n");
1050 data->irq_count = irq_count;
1051 data->num_of_irq_regs = (data->irq_count + 7) / 8;
1053 size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long);
1054 data->irq_memory = devm_kcalloc(dev, size, 4, GFP_KERNEL);
1055 if (!data->irq_memory) {
1056 dev_err(dev, "Failed to allocate memory for irq masks.\n");
1060 data->irq_status = data->irq_memory + size * 0;
1061 data->fn_irq_bits = data->irq_memory + size * 1;
1062 data->current_irq_mask = data->irq_memory + size * 2;
1063 data->new_irq_mask = data->irq_memory + size * 3;
1068 int rmi_init_functions(struct rmi_driver_data *data)
1070 struct rmi_device *rmi_dev = data->rmi_dev;
1071 struct device *dev = &rmi_dev->dev;
1075 rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__);
1076 retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
1078 dev_err(dev, "Function creation failed with code %d.\n",
1080 goto err_destroy_functions;
1083 if (!data->f01_container) {
1084 dev_err(dev, "Missing F01 container!\n");
1086 goto err_destroy_functions;
1089 retval = rmi_read_block(rmi_dev,
1090 data->f01_container->fd.control_base_addr + 1,
1091 data->current_irq_mask, data->num_of_irq_regs);
1093 dev_err(dev, "%s: Failed to read current IRQ mask.\n",
1095 goto err_destroy_functions;
1100 err_destroy_functions:
1101 rmi_free_function_list(rmi_dev);
1105 static int rmi_driver_probe(struct device *dev)
1107 struct rmi_driver *rmi_driver;
1108 struct rmi_driver_data *data;
1109 struct rmi_device_platform_data *pdata;
1110 struct rmi_device *rmi_dev;
1113 rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Starting probe.\n",
1116 if (!rmi_is_physical_device(dev)) {
1117 rmi_dbg(RMI_DEBUG_CORE, dev, "Not a physical device.\n");
1121 rmi_dev = to_rmi_device(dev);
1122 rmi_driver = to_rmi_driver(dev->driver);
1123 rmi_dev->driver = rmi_driver;
1125 pdata = rmi_get_platform_data(rmi_dev);
1127 if (rmi_dev->xport->dev->of_node) {
1128 retval = rmi_driver_of_probe(rmi_dev->xport->dev, pdata);
1133 data = devm_kzalloc(dev, sizeof(struct rmi_driver_data), GFP_KERNEL);
1137 INIT_LIST_HEAD(&data->function_list);
1138 data->rmi_dev = rmi_dev;
1139 dev_set_drvdata(&rmi_dev->dev, data);
1142 * Right before a warm boot, the sensor might be in some unusual state,
1143 * such as F54 diagnostics, or F34 bootloader mode after a firmware
1144 * or configuration update. In order to clear the sensor to a known
1145 * state and/or apply any updates, we issue a initial reset to clear any
1146 * previous settings and force it into normal operation.
1148 * We have to do this before actually building the PDT because
1149 * the reflash updates (if any) might cause various registers to move
1152 * For a number of reasons, this initial reset may fail to return
1153 * within the specified time, but we'll still be able to bring up the
1154 * driver normally after that failure. This occurs most commonly in
1155 * a cold boot situation (where then firmware takes longer to come up
1156 * than from a warm boot) and the reset_delay_ms in the platform data
1157 * has been set too short to accommodate that. Since the sensor will
1158 * eventually come up and be usable, we don't want to just fail here
1159 * and leave the customer's device unusable. So we warn them, and
1160 * continue processing.
1162 retval = rmi_scan_pdt(rmi_dev, NULL, rmi_initial_reset);
1164 dev_warn(dev, "RMI initial reset failed! Continuing in spite of this.\n");
1166 retval = rmi_read(rmi_dev, PDT_PROPERTIES_LOCATION, &data->pdt_props);
1169 * we'll print out a warning and continue since
1170 * failure to get the PDT properties is not a cause to fail
1172 dev_warn(dev, "Could not read PDT properties from %#06x (code %d). Assuming 0x00.\n",
1173 PDT_PROPERTIES_LOCATION, retval);
1176 mutex_init(&data->irq_mutex);
1177 mutex_init(&data->enabled_mutex);
1179 retval = rmi_probe_interrupts(data);
1183 if (rmi_dev->xport->input) {
1185 * The transport driver already has an input device.
1186 * In some cases it is preferable to reuse the transport
1187 * devices input device instead of creating a new one here.
1188 * One example is some HID touchpads report "pass-through"
1189 * button events are not reported by rmi registers.
1191 data->input = rmi_dev->xport->input;
1193 data->input = devm_input_allocate_device(dev);
1195 dev_err(dev, "%s: Failed to allocate input device.\n",
1200 rmi_driver_set_input_params(rmi_dev, data->input);
1201 data->input->phys = devm_kasprintf(dev, GFP_KERNEL,
1202 "%s/input0", dev_name(dev));
1205 retval = rmi_init_functions(data);
1209 retval = rmi_f34_create_sysfs(rmi_dev);
1214 rmi_driver_set_input_name(rmi_dev, data->input);
1215 if (!rmi_dev->xport->input) {
1216 if (input_register_device(data->input)) {
1217 dev_err(dev, "%s: Failed to register input device.\n",
1219 goto err_destroy_functions;
1224 retval = rmi_irq_init(rmi_dev);
1226 goto err_destroy_functions;
1228 if (data->f01_container->dev.driver) {
1229 /* Driver already bound, so enable ATTN now. */
1230 retval = rmi_enable_sensor(rmi_dev);
1232 goto err_disable_irq;
1238 rmi_disable_irq(rmi_dev, false);
1239 err_destroy_functions:
1240 rmi_free_function_list(rmi_dev);
1245 static struct rmi_driver rmi_physical_driver = {
1247 .owner = THIS_MODULE,
1248 .name = "rmi4_physical",
1249 .bus = &rmi_bus_type,
1250 .probe = rmi_driver_probe,
1251 .remove = rmi_driver_remove,
1253 .reset_handler = rmi_driver_reset_handler,
1254 .clear_irq_bits = rmi_driver_clear_irq_bits,
1255 .set_irq_bits = rmi_driver_set_irq_bits,
1256 .set_input_params = rmi_driver_set_input_params,
1259 bool rmi_is_physical_driver(struct device_driver *drv)
1261 return drv == &rmi_physical_driver.driver;
1264 int __init rmi_register_physical_driver(void)
1268 error = driver_register(&rmi_physical_driver.driver);
1270 pr_err("%s: driver register failed, code=%d.\n", __func__,
1278 void __exit rmi_unregister_physical_driver(void)
1280 driver_unregister(&rmi_physical_driver.driver);