drivers/media/platform/omap3isp/ispccp2.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * ispccp2.c
   4  *
   5  * TI OMAP3 ISP - CCP2 module
   6  *
   7  * Copyright (C) 2010 Nokia Corporation
   8  * Copyright (C) 2010 Texas Instruments, Inc.
   9  *
  10  * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
  11  *           Sakari Ailus <sakari.ailus@iki.fi>
  12  */
  13
  14 #include <linux/delay.h>
  15 #include <linux/device.h>
  16 #include <linux/mm.h>
  17 #include <linux/module.h>
  18 #include <linux/mutex.h>
  19 #include <linux/uaccess.h>
  20 #include <linux/regulator/consumer.h>
  21
  22 #include "isp.h"
  23 #include "ispreg.h"
  24 #include "ispccp2.h"
  25
  26 /* Number of LCX channels */
  27 #define CCP2_LCx_CHANS_NUM                      3
  28 /* Max/Min size for CCP2 video port */
  29 #define ISPCCP2_DAT_START_MIN                   0
  30 #define ISPCCP2_DAT_START_MAX                   4095
  31 #define ISPCCP2_DAT_SIZE_MIN                    0
  32 #define ISPCCP2_DAT_SIZE_MAX                    4095
  33 #define ISPCCP2_VPCLK_FRACDIV                   65536
  34 #define ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP  0x12
  35 #define ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP        0x16
  36 /* Max/Min size for CCP2 memory channel */
  37 #define ISPCCP2_LCM_HSIZE_COUNT_MIN             16
  38 #define ISPCCP2_LCM_HSIZE_COUNT_MAX             8191
  39 #define ISPCCP2_LCM_HSIZE_SKIP_MIN              0
  40 #define ISPCCP2_LCM_HSIZE_SKIP_MAX              8191
  41 #define ISPCCP2_LCM_VSIZE_MIN                   1
  42 #define ISPCCP2_LCM_VSIZE_MAX                   8191
  43 #define ISPCCP2_LCM_HWORDS_MIN                  1
  44 #define ISPCCP2_LCM_HWORDS_MAX                  4095
  45 #define ISPCCP2_LCM_CTRL_BURST_SIZE_32X         5
  46 #define ISPCCP2_LCM_CTRL_READ_THROTTLE_FULL     0
  47 #define ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10     2
  48 #define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8        2
  49 #define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10       3
  50 #define ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10       3
  51 #define ISPCCP2_LCM_CTRL_DST_PORT_VP            0
  52 #define ISPCCP2_LCM_CTRL_DST_PORT_MEM           1
  53
  54 /* Set only the required bits */
  55 #define BIT_SET(var, shift, mask, val)                  \
  56         do {                                            \
  57                 var = ((var) & ~((mask) << (shift)))    \
  58                         | ((val) << (shift));           \
  59         } while (0)
  60
  61 /*
  62  * ccp2_print_status - Print current CCP2 module register values.
  63  */
  64 #define CCP2_PRINT_REGISTER(isp, name)\
  65         dev_dbg(isp->dev, "###CCP2 " #name "=0x%08x\n", \
  66                 isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_##name))
  67
  68 static void ccp2_print_status(struct isp_ccp2_device *ccp2)
  69 {
  70         struct isp_device *isp = to_isp_device(ccp2);
  71
  72         dev_dbg(isp->dev, "-------------CCP2 Register dump-------------\n");
  73
  74         CCP2_PRINT_REGISTER(isp, SYSCONFIG);
  75         CCP2_PRINT_REGISTER(isp, SYSSTATUS);
  76         CCP2_PRINT_REGISTER(isp, LC01_IRQENABLE);
  77         CCP2_PRINT_REGISTER(isp, LC01_IRQSTATUS);
  78         CCP2_PRINT_REGISTER(isp, LC23_IRQENABLE);
  79         CCP2_PRINT_REGISTER(isp, LC23_IRQSTATUS);
  80         CCP2_PRINT_REGISTER(isp, LCM_IRQENABLE);
  81         CCP2_PRINT_REGISTER(isp, LCM_IRQSTATUS);
  82         CCP2_PRINT_REGISTER(isp, CTRL);
  83         CCP2_PRINT_REGISTER(isp, LCx_CTRL(0));
  84         CCP2_PRINT_REGISTER(isp, LCx_CODE(0));
  85         CCP2_PRINT_REGISTER(isp, LCx_STAT_START(0));
  86         CCP2_PRINT_REGISTER(isp, LCx_STAT_SIZE(0));
  87         CCP2_PRINT_REGISTER(isp, LCx_SOF_ADDR(0));
  88         CCP2_PRINT_REGISTER(isp, LCx_EOF_ADDR(0));
  89         CCP2_PRINT_REGISTER(isp, LCx_DAT_START(0));
  90         CCP2_PRINT_REGISTER(isp, LCx_DAT_SIZE(0));
  91         CCP2_PRINT_REGISTER(isp, LCx_DAT_PING_ADDR(0));
  92         CCP2_PRINT_REGISTER(isp, LCx_DAT_PONG_ADDR(0));
  93         CCP2_PRINT_REGISTER(isp, LCx_DAT_OFST(0));
  94         CCP2_PRINT_REGISTER(isp, LCM_CTRL);
  95         CCP2_PRINT_REGISTER(isp, LCM_VSIZE);
  96         CCP2_PRINT_REGISTER(isp, LCM_HSIZE);
  97         CCP2_PRINT_REGISTER(isp, LCM_PREFETCH);
  98         CCP2_PRINT_REGISTER(isp, LCM_SRC_ADDR);
  99         CCP2_PRINT_REGISTER(isp, LCM_SRC_OFST);
 100         CCP2_PRINT_REGISTER(isp, LCM_DST_ADDR);
 101         CCP2_PRINT_REGISTER(isp, LCM_DST_OFST);
 102
 103         dev_dbg(isp->dev, "--------------------------------------------\n");
 104 }
 105
 106 /*
 107  * ccp2_reset - Reset the CCP2
 108  * @ccp2: pointer to ISP CCP2 device
 109  */
 110 static void ccp2_reset(struct isp_ccp2_device *ccp2)
 111 {
 112         struct isp_device *isp = to_isp_device(ccp2);
 113         int i = 0;
 114
 115         /* Reset the CSI1/CCP2B and wait for reset to complete */
 116         isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG,
 117                     ISPCCP2_SYSCONFIG_SOFT_RESET);
 118         while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSSTATUS) &
 119                  ISPCCP2_SYSSTATUS_RESET_DONE)) {
 120                 udelay(10);
 121                 if (i++ > 10) {  /* try read 10 times */
 122                         dev_warn(isp->dev,
 123                                 "omap3_isp: timeout waiting for ccp2 reset\n");
 124                         break;
 125                 }
 126         }
 127 }
 128
 129 /*
 130  * ccp2_pwr_cfg - Configure the power mode settings
 131  * @ccp2: pointer to ISP CCP2 device
 132  */
 133 static void ccp2_pwr_cfg(struct isp_ccp2_device *ccp2)
 134 {
 135         struct isp_device *isp = to_isp_device(ccp2);
 136
 137         isp_reg_writel(isp, ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART |
 138                         ((isp->revision == ISP_REVISION_15_0 && isp->autoidle) ?
 139                           ISPCCP2_SYSCONFIG_AUTO_IDLE : 0),
 140                        OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG);
 141 }
 142
 143 /*
 144  * ccp2_if_enable - Enable CCP2 interface.
 145  * @ccp2: pointer to ISP CCP2 device
 146  * @enable: enable/disable flag
 147  */
 148 static int ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable)
 149 {
 150         struct isp_device *isp = to_isp_device(ccp2);
 151         int ret;
 152         int i;
 153
 154         if (enable && ccp2->vdds_csib) {
 155                 ret = regulator_enable(ccp2->vdds_csib);
 156                 if (ret < 0)
 157                         return ret;
 158         }
 159
 160         /* Enable/Disable all the LCx channels */
 161         for (i = 0; i < CCP2_LCx_CHANS_NUM; i++)
 162                 isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i),
 163                                 ISPCCP2_LCx_CTRL_CHAN_EN,
 164                                 enable ? ISPCCP2_LCx_CTRL_CHAN_EN : 0);
 165
 166         /* Enable/Disable ccp2 interface in ccp2 mode */
 167         isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
 168                         ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN,
 169                         enable ? (ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN) : 0);
 170
 171         if (!enable && ccp2->vdds_csib)
 172                 regulator_disable(ccp2->vdds_csib);
 173
 174         return 0;
 175 }
 176
 177 /*
 178  * ccp2_mem_enable - Enable CCP2 memory interface.
 179  * @ccp2: pointer to ISP CCP2 device
 180  * @enable: enable/disable flag
 181  */
 182 static void ccp2_mem_enable(struct isp_ccp2_device *ccp2, u8 enable)
 183 {
 184         struct isp_device *isp = to_isp_device(ccp2);
 185
 186         if (enable)
 187                 ccp2_if_enable(ccp2, 0);
 188
 189         /* Enable/Disable ccp2 interface in ccp2 mode */
 190         isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
 191                         ISPCCP2_CTRL_MODE, enable ? ISPCCP2_CTRL_MODE : 0);
 192
 193         isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL,
 194                         ISPCCP2_LCM_CTRL_CHAN_EN,
 195                         enable ? ISPCCP2_LCM_CTRL_CHAN_EN : 0);
 196 }
 197
 198 /*
 199  * ccp2_phyif_config - Initialize CCP2 phy interface config
 200  * @ccp2: Pointer to ISP CCP2 device
 201  * @buscfg: CCP2 platform data
 202  *
 203  * Configure the CCP2 physical interface module from platform data.
 204  *
 205  * Returns -EIO if strobe is chosen in CSI1 mode, or 0 on success.
 206  */
 207 static int ccp2_phyif_config(struct isp_ccp2_device *ccp2,
 208                              const struct isp_ccp2_cfg *buscfg)
 209 {
 210         struct isp_device *isp = to_isp_device(ccp2);
 211         u32 val;
 212
 213         val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL) |
 214                             ISPCCP2_CTRL_MODE;
 215         /* Data/strobe physical layer */
 216         BIT_SET(val, ISPCCP2_CTRL_PHY_SEL_SHIFT, ISPCCP2_CTRL_PHY_SEL_MASK,
 217                 buscfg->phy_layer);
 218         BIT_SET(val, ISPCCP2_CTRL_IO_OUT_SEL_SHIFT,
 219                 ISPCCP2_CTRL_IO_OUT_SEL_MASK, buscfg->ccp2_mode);
 220         BIT_SET(val, ISPCCP2_CTRL_INV_SHIFT, ISPCCP2_CTRL_INV_MASK,
 221                 buscfg->strobe_clk_pol);
 222         BIT_SET(val, ISPCCP2_CTRL_VP_CLK_POL_SHIFT,
 223                 ISPCCP2_CTRL_VP_CLK_POL_MASK, buscfg->vp_clk_pol);
 224         isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
 225
 226         val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
 227         if (!(val & ISPCCP2_CTRL_MODE)) {
 228                 if (buscfg->ccp2_mode == ISP_CCP2_MODE_CCP2)
 229                         dev_warn(isp->dev, "OMAP3 CCP2 bus not available\n");
 230                 if (buscfg->phy_layer == ISP_CCP2_PHY_DATA_STROBE)
 231                         /* Strobe mode requires CCP2 */
 232                         return -EIO;
 233         }
 234
 235         return 0;
 236 }
 237
 238 /*
 239  * ccp2_vp_config - Initialize CCP2 video port interface.
 240  * @ccp2: Pointer to ISP CCP2 device
 241  * @vpclk_div: Video port divisor
 242  *
 243  * Configure the CCP2 video port with the given clock divisor. The valid divisor
 244  * values depend on the ISP revision:
 245  *
 246  * - revision 1.0 and 2.0       1 to 4
 247  * - revision 15.0              1 to 65536
 248  *
 249  * The exact divisor value used might differ from the requested value, as ISP
 250  * revision 15.0 represent the divisor by 65536 divided by an integer.
 251  */
 252 static void ccp2_vp_config(struct isp_ccp2_device *ccp2,
 253                            unsigned int vpclk_div)
 254 {
 255         struct isp_device *isp = to_isp_device(ccp2);
 256         u32 val;
 257
 258         /* ISPCCP2_CTRL Video port */
 259         val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
 260         val |= ISPCCP2_CTRL_VP_ONLY_EN; /* Disable the memory write port */
 261
 262         if (isp->revision == ISP_REVISION_15_0) {
 263                 vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 65536);
 264                 vpclk_div = min(ISPCCP2_VPCLK_FRACDIV / vpclk_div, 65535U);
 265                 BIT_SET(val, ISPCCP2_CTRL_VPCLK_DIV_SHIFT,
 266                         ISPCCP2_CTRL_VPCLK_DIV_MASK, vpclk_div);
 267         } else {
 268                 vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 4);
 269                 BIT_SET(val, ISPCCP2_CTRL_VP_OUT_CTRL_SHIFT,
 270                         ISPCCP2_CTRL_VP_OUT_CTRL_MASK, vpclk_div - 1);
 271         }
 272
 273         isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL);
 274 }
 275
 276 /*
 277  * ccp2_lcx_config - Initialize CCP2 logical channel interface.
 278  * @ccp2: Pointer to ISP CCP2 device
 279  * @config: Pointer to ISP LCx config structure.
 280  *
 281  * This will analyze the parameters passed by the interface config
 282  * and configure CSI1/CCP2 logical channel
 283  *
 284  */
 285 static void ccp2_lcx_config(struct isp_ccp2_device *ccp2,
 286                             struct isp_interface_lcx_config *config)
 287 {
 288         struct isp_device *isp = to_isp_device(ccp2);
 289         u32 val, format;
 290
 291         switch (config->format) {
 292         case MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8:
 293                 format = ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP;
 294                 break;
 295         case MEDIA_BUS_FMT_SGRBG10_1X10:
 296         default:
 297                 format = ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP;      /* RAW10+VP */
 298                 break;
 299         }
 300         /* ISPCCP2_LCx_CTRL logical channel #0 */
 301         val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0))
 302                             | (ISPCCP2_LCx_CTRL_REGION_EN); /* Region */
 303
 304         if (isp->revision == ISP_REVISION_15_0) {
 305                 /* CRC */
 306                 BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT_15_0,
 307                         ISPCCP2_LCx_CTRL_CRC_MASK,
 308                         config->crc);
 309                 /* Format = RAW10+VP or RAW8+DPCM10+VP*/
 310                 BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT_15_0,
 311                         ISPCCP2_LCx_CTRL_FORMAT_MASK_15_0, format);
 312         } else {
 313                 BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT,
 314                         ISPCCP2_LCx_CTRL_CRC_MASK,
 315                         config->crc);
 316
 317                 BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT,
 318                         ISPCCP2_LCx_CTRL_FORMAT_MASK, format);
 319         }
 320         isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0));
 321
 322         /* ISPCCP2_DAT_START for logical channel #0 */
 323         isp_reg_writel(isp, config->data_start << ISPCCP2_LCx_DAT_SHIFT,
 324                        OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_START(0));
 325
 326         /* ISPCCP2_DAT_SIZE for logical channel #0 */
 327         isp_reg_writel(isp, config->data_size << ISPCCP2_LCx_DAT_SHIFT,
 328                        OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_SIZE(0));
 329
 330         /* Enable error IRQs for logical channel #0 */
 331         val = ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
 332               ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
 333               ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
 334               ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
 335               ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
 336               ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
 337
 338         isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQSTATUS);
 339         isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQENABLE, val);
 340 }
 341
 342 /*
 343  * ccp2_if_configure - Configure ccp2 with data from sensor
 344  * @ccp2: Pointer to ISP CCP2 device
 345  *
 346  * Return 0 on success or a negative error code
 347  */
 348 static int ccp2_if_configure(struct isp_ccp2_device *ccp2)
 349 {
 350         struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
 351         const struct isp_bus_cfg *buscfg;
 352         struct v4l2_mbus_framefmt *format;
 353         struct media_pad *pad;
 354         struct v4l2_subdev *sensor;
 355         u32 lines = 0;
 356         int ret;
 357
 358         ccp2_pwr_cfg(ccp2);
 359
 360         pad = media_entity_remote_pad(&ccp2->pads[CCP2_PAD_SINK]);
 361         sensor = media_entity_to_v4l2_subdev(pad->entity);
 362         buscfg = v4l2_subdev_to_bus_cfg(pipe->external);
 363
 364         ret = ccp2_phyif_config(ccp2, &buscfg->bus.ccp2);
 365         if (ret < 0)
 366                 return ret;
 367
 368         ccp2_vp_config(ccp2, buscfg->bus.ccp2.vpclk_div + 1);
 369
 370         v4l2_subdev_call(sensor, sensor, g_skip_top_lines, &lines);
 371
 372         format = &ccp2->formats[CCP2_PAD_SINK];
 373
 374         ccp2->if_cfg.data_start = lines;
 375         ccp2->if_cfg.crc = buscfg->bus.ccp2.crc;
 376         ccp2->if_cfg.format = format->code;
 377         ccp2->if_cfg.data_size = format->height;
 378
 379         ccp2_lcx_config(ccp2, &ccp2->if_cfg);
 380
 381         return 0;
 382 }
 383
 384 static int ccp2_adjust_bandwidth(struct isp_ccp2_device *ccp2)
 385 {
 386         struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
 387         struct isp_device *isp = to_isp_device(ccp2);
 388         const struct v4l2_mbus_framefmt *ofmt = &ccp2->formats[CCP2_PAD_SOURCE];
 389         unsigned long l3_ick = pipe->l3_ick;
 390         struct v4l2_fract *timeperframe;
 391         unsigned int vpclk_div = 2;
 392         unsigned int value;
 393         u64 bound;
 394         u64 area;
 395
 396         /* Compute the minimum clock divisor, based on the pipeline maximum
 397          * data rate. This is an absolute lower bound if we don't want SBL
 398          * overflows, so round the value up.
 399          */
 400         vpclk_div = max_t(unsigned int, DIV_ROUND_UP(l3_ick, pipe->max_rate),
 401                           vpclk_div);
 402
 403         /* Compute the maximum clock divisor, based on the requested frame rate.
 404          * This is a soft lower bound to achieve a frame rate equal or higher
 405          * than the requested value, so round the value down.
 406          */
 407         timeperframe = &pipe->max_timeperframe;
 408
 409         if (timeperframe->numerator) {
 410                 area = ofmt->width * ofmt->height;
 411                 bound = div_u64(area * timeperframe->denominator,
 412                                 timeperframe->numerator);
 413                 value = min_t(u64, bound, l3_ick);
 414                 vpclk_div = max_t(unsigned int, l3_ick / value, vpclk_div);
 415         }
 416
 417         dev_dbg(isp->dev, "%s: minimum clock divisor = %u\n", __func__,
 418                 vpclk_div);
 419
 420         return vpclk_div;
 421 }
 422
 423 /*
 424  * ccp2_mem_configure - Initialize CCP2 memory input/output interface
 425  * @ccp2: Pointer to ISP CCP2 device
 426  * @config: Pointer to ISP mem interface config structure
 427  *
 428  * This will analyze the parameters passed by the interface config
 429  * structure, and configure the respective registers for proper
 430  * CSI1/CCP2 memory input.
 431  */
 432 static void ccp2_mem_configure(struct isp_ccp2_device *ccp2,
 433                                struct isp_interface_mem_config *config)
 434 {
 435         struct isp_device *isp = to_isp_device(ccp2);
 436         u32 sink_pixcode = ccp2->formats[CCP2_PAD_SINK].code;
 437         u32 source_pixcode = ccp2->formats[CCP2_PAD_SOURCE].code;
 438         unsigned int dpcm_decompress = 0;
 439         u32 val, hwords;
 440
 441         if (sink_pixcode != source_pixcode &&
 442             sink_pixcode == MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8)
 443                 dpcm_decompress = 1;
 444
 445         ccp2_pwr_cfg(ccp2);
 446
 447         /* Hsize, Skip */
 448         isp_reg_writel(isp, ISPCCP2_LCM_HSIZE_SKIP_MIN |
 449                        (config->hsize_count << ISPCCP2_LCM_HSIZE_SHIFT),
 450                        OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_HSIZE);
 451
 452         /* Vsize, no. of lines */
 453         isp_reg_writel(isp, config->vsize_count << ISPCCP2_LCM_VSIZE_SHIFT,
 454                        OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_VSIZE);
 455
 456         if (ccp2->video_in.bpl_padding == 0)
 457                 config->src_ofst = 0;
 458         else
 459                 config->src_ofst = ccp2->video_in.bpl_value;
 460
 461         isp_reg_writel(isp, config->src_ofst, OMAP3_ISP_IOMEM_CCP2,
 462                        ISPCCP2_LCM_SRC_OFST);
 463
 464         /* Source and Destination formats */
 465         val = ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10 <<
 466               ISPCCP2_LCM_CTRL_DST_FORMAT_SHIFT;
 467
 468         if (dpcm_decompress) {
 469                 /* source format is RAW8 */
 470                 val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8 <<
 471                        ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;
 472
 473                 /* RAW8 + DPCM10 - simple predictor */
 474                 val |= ISPCCP2_LCM_CTRL_SRC_DPCM_PRED;
 475
 476                 /* enable source DPCM decompression */
 477                 val |= ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10 <<
 478                        ISPCCP2_LCM_CTRL_SRC_DECOMPR_SHIFT;
 479         } else {
 480                 /* source format is RAW10 */
 481                 val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10 <<
 482                        ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT;
 483         }
 484
 485         /* Burst size to 32x64 */
 486         val |= ISPCCP2_LCM_CTRL_BURST_SIZE_32X <<
 487                ISPCCP2_LCM_CTRL_BURST_SIZE_SHIFT;
 488
 489         isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL);
 490
 491         /* Prefetch setup */
 492         if (dpcm_decompress)
 493                 hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
 494                           config->hsize_count) >> 3;
 495         else
 496                 hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN +
 497                           config->hsize_count) >> 2;
 498
 499         isp_reg_writel(isp, hwords << ISPCCP2_LCM_PREFETCH_SHIFT,
 500                        OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_PREFETCH);
 501
 502         /* Video port */
 503         isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL,
 504                     ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE);
 505         ccp2_vp_config(ccp2, ccp2_adjust_bandwidth(ccp2));
 506
 507         /* Clear LCM interrupts */
 508         isp_reg_writel(isp, ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ |
 509                        ISPCCP2_LCM_IRQSTATUS_EOF_IRQ,
 510                        OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQSTATUS);
 511
 512         /* Enable LCM interrupts */
 513         isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQENABLE,
 514                     ISPCCP2_LCM_IRQSTATUS_EOF_IRQ |
 515                     ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ);
 516 }
 517
 518 /*
 519  * ccp2_set_inaddr - Sets memory address of input frame.
 520  * @ccp2: Pointer to ISP CCP2 device
 521  * @addr: 32bit memory address aligned on 32byte boundary.
 522  *
 523  * Configures the memory address from which the input frame is to be read.
 524  */
 525 static void ccp2_set_inaddr(struct isp_ccp2_device *ccp2, u32 addr)
 526 {
 527         struct isp_device *isp = to_isp_device(ccp2);
 528
 529         isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_SRC_ADDR);
 530 }
 531
 532 /* -----------------------------------------------------------------------------
 533  * Interrupt handling
 534  */
 535
 536 static void ccp2_isr_buffer(struct isp_ccp2_device *ccp2)
 537 {
 538         struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
 539         struct isp_buffer *buffer;
 540
 541         buffer = omap3isp_video_buffer_next(&ccp2->video_in);
 542         if (buffer != NULL)
 543                 ccp2_set_inaddr(ccp2, buffer->dma);
 544
 545         pipe->state |= ISP_PIPELINE_IDLE_INPUT;
 546
 547         if (ccp2->state == ISP_PIPELINE_STREAM_SINGLESHOT) {
 548                 if (isp_pipeline_ready(pipe))
 549                         omap3isp_pipeline_set_stream(pipe,
 550                                                 ISP_PIPELINE_STREAM_SINGLESHOT);
 551         }
 552 }
 553
 554 /*
 555  * omap3isp_ccp2_isr - Handle ISP CCP2 interrupts
 556  * @ccp2: Pointer to ISP CCP2 device
 557  *
 558  * This will handle the CCP2 interrupts
 559  */
 560 void omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2)
 561 {
 562         struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity);
 563         struct isp_device *isp = to_isp_device(ccp2);
 564         static const u32 ISPCCP2_LC01_ERROR =
 565                 ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ |
 566                 ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ |
 567                 ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ |
 568                 ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ |
 569                 ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ |
 570                 ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ;
 571         u32 lcx_irqstatus, lcm_irqstatus;
 572
 573         /* First clear the interrupts */
 574         lcx_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
 575                                       ISPCCP2_LC01_IRQSTATUS);
 576         isp_reg_writel(isp, lcx_irqstatus, OMAP3_ISP_IOMEM_CCP2,
 577                        ISPCCP2_LC01_IRQSTATUS);
 578
 579         lcm_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2,
 580                                       ISPCCP2_LCM_IRQSTATUS);
 581         isp_reg_writel(isp, lcm_irqstatus, OMAP3_ISP_IOMEM_CCP2,
 582                        ISPCCP2_LCM_IRQSTATUS);
 583         /* Errors */
 584         if (lcx_irqstatus & ISPCCP2_LC01_ERROR) {
 585                 pipe->error = true;
 586                 dev_dbg(isp->dev, "CCP2 err:%x\n", lcx_irqstatus);
 587                 return;
 588         }
 589
 590         if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ) {
 591                 pipe->error = true;
 592                 dev_dbg(isp->dev, "CCP2 OCP err:%x\n", lcm_irqstatus);
 593         }
 594
 595         if (omap3isp_module_sync_is_stopping(&ccp2->wait, &ccp2->stopping))
 596                 return;
 597
 598         /* Handle queued buffers on frame end interrupts */
 599         if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_EOF_IRQ)
 600                 ccp2_isr_buffer(ccp2);
 601 }
 602
 603 /* -----------------------------------------------------------------------------
 604  * V4L2 subdev operations
 605  */
 606
 607 static const unsigned int ccp2_fmts[] = {
 608         MEDIA_BUS_FMT_SGRBG10_1X10,
 609         MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8,
 610 };
 611
 612 /*
 613  * __ccp2_get_format - helper function for getting ccp2 format
 614  * @ccp2  : Pointer to ISP CCP2 device
 615  * @cfg: V4L2 subdev pad configuration
 616  * @pad   : pad number
 617  * @which : wanted subdev format
 618  * return format structure or NULL on error
 619  */
 620 static struct v4l2_mbus_framefmt *
 621 __ccp2_get_format(struct isp_ccp2_device *ccp2, struct v4l2_subdev_pad_config *cfg,
 622                      unsigned int pad, enum v4l2_subdev_format_whence which)
 623 {
 624         if (which == V4L2_SUBDEV_FORMAT_TRY)
 625                 return v4l2_subdev_get_try_format(&ccp2->subdev, cfg, pad);
 626         else
 627                 return &ccp2->formats[pad];
 628 }
 629
 630 /*
 631  * ccp2_try_format - Handle try format by pad subdev method
 632  * @ccp2  : Pointer to ISP CCP2 device
 633  * @cfg: V4L2 subdev pad configuration
 634  * @pad   : pad num
 635  * @fmt   : pointer to v4l2 mbus format structure
 636  * @which : wanted subdev format
 637  */
 638 static void ccp2_try_format(struct isp_ccp2_device *ccp2,
 639                                struct v4l2_subdev_pad_config *cfg, unsigned int pad,
 640                                struct v4l2_mbus_framefmt *fmt,
 641                                enum v4l2_subdev_format_whence which)
 642 {
 643         struct v4l2_mbus_framefmt *format;
 644
 645         switch (pad) {
 646         case CCP2_PAD_SINK:
 647                 if (fmt->code != MEDIA_BUS_FMT_SGRBG10_DPCM8_1X8)
 648                         fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
 649
 650                 if (ccp2->input == CCP2_INPUT_SENSOR) {
 651                         fmt->width = clamp_t(u32, fmt->width,
 652                                              ISPCCP2_DAT_START_MIN,
 653                                              ISPCCP2_DAT_START_MAX);
 654                         fmt->height = clamp_t(u32, fmt->height,
 655                                               ISPCCP2_DAT_SIZE_MIN,
 656                                               ISPCCP2_DAT_SIZE_MAX);
 657                 } else if (ccp2->input == CCP2_INPUT_MEMORY) {
 658                         fmt->width = clamp_t(u32, fmt->width,
 659                                              ISPCCP2_LCM_HSIZE_COUNT_MIN,
 660                                              ISPCCP2_LCM_HSIZE_COUNT_MAX);
 661                         fmt->height = clamp_t(u32, fmt->height,
 662                                               ISPCCP2_LCM_VSIZE_MIN,
 663                                               ISPCCP2_LCM_VSIZE_MAX);
 664                 }
 665                 break;
 666
 667         case CCP2_PAD_SOURCE:
 668                 /* Source format - copy sink format and change pixel code
 669                  * to SGRBG10_1X10 as we don't support CCP2 write to memory.
 670                  * When CCP2 write to memory feature will be added this
 671                  * should be changed properly.
 672                  */
 673                 format = __ccp2_get_format(ccp2, cfg, CCP2_PAD_SINK, which);
 674                 memcpy(fmt, format, sizeof(*fmt));
 675                 fmt->code = MEDIA_BUS_FMT_SGRBG10_1X10;
 676                 break;
 677         }
 678
 679         fmt->field = V4L2_FIELD_NONE;
 680         fmt->colorspace = V4L2_COLORSPACE_SRGB;
 681 }
 682
 683 /*
 684  * ccp2_enum_mbus_code - Handle pixel format enumeration
 685  * @sd     : pointer to v4l2 subdev structure
 686  * @cfg: V4L2 subdev pad configuration
 687  * @code   : pointer to v4l2_subdev_mbus_code_enum structure
 688  * return -EINVAL or zero on success
 689  */
 690 static int ccp2_enum_mbus_code(struct v4l2_subdev *sd,
 691                                   struct v4l2_subdev_pad_config *cfg,
 692                                   struct v4l2_subdev_mbus_code_enum *code)
 693 {
 694         struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
 695         struct v4l2_mbus_framefmt *format;
 696
 697         if (code->pad == CCP2_PAD_SINK) {
 698                 if (code->index >= ARRAY_SIZE(ccp2_fmts))
 699                         return -EINVAL;
 700
 701                 code->code = ccp2_fmts[code->index];
 702         } else {
 703                 if (code->index != 0)
 704                         return -EINVAL;
 705
 706                 format = __ccp2_get_format(ccp2, cfg, CCP2_PAD_SINK,
 707                                               code->which);
 708                 code->code = format->code;
 709         }
 710
 711         return 0;
 712 }
 713
 714 static int ccp2_enum_frame_size(struct v4l2_subdev *sd,
 715                                    struct v4l2_subdev_pad_config *cfg,
 716                                    struct v4l2_subdev_frame_size_enum *fse)
 717 {
 718         struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
 719         struct v4l2_mbus_framefmt format;
 720
 721         if (fse->index != 0)
 722                 return -EINVAL;
 723
 724         format.code = fse->code;
 725         format.width = 1;
 726         format.height = 1;
 727         ccp2_try_format(ccp2, cfg, fse->pad, &format, fse->which);
 728         fse->min_width = format.width;
 729         fse->min_height = format.height;
 730
 731         if (format.code != fse->code)
 732                 return -EINVAL;
 733
 734         format.code = fse->code;
 735         format.width = -1;
 736         format.height = -1;
 737         ccp2_try_format(ccp2, cfg, fse->pad, &format, fse->which);
 738         fse->max_width = format.width;
 739         fse->max_height = format.height;
 740
 741         return 0;
 742 }
 743
 744 /*
 745  * ccp2_get_format - Handle get format by pads subdev method
 746  * @sd    : pointer to v4l2 subdev structure
 747  * @cfg: V4L2 subdev pad configuration
 748  * @fmt   : pointer to v4l2 subdev format structure
 749  * return -EINVAL or zero on success
 750  */
 751 static int ccp2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
 752                               struct v4l2_subdev_format *fmt)
 753 {
 754         struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
 755         struct v4l2_mbus_framefmt *format;
 756
 757         format = __ccp2_get_format(ccp2, cfg, fmt->pad, fmt->which);
 758         if (format == NULL)
 759                 return -EINVAL;
 760
 761         fmt->format = *format;
 762         return 0;
 763 }
 764
 765 /*
 766  * ccp2_set_format - Handle set format by pads subdev method
 767  * @sd    : pointer to v4l2 subdev structure
 768  * @cfg: V4L2 subdev pad configuration
 769  * @fmt   : pointer to v4l2 subdev format structure
 770  * returns zero
 771  */
 772 static int ccp2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg,
 773                               struct v4l2_subdev_format *fmt)
 774 {
 775         struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
 776         struct v4l2_mbus_framefmt *format;
 777
 778         format = __ccp2_get_format(ccp2, cfg, fmt->pad, fmt->which);
 779         if (format == NULL)
 780                 return -EINVAL;
 781
 782         ccp2_try_format(ccp2, cfg, fmt->pad, &fmt->format, fmt->which);
 783         *format = fmt->format;
 784
 785         /* Propagate the format from sink to source */
 786         if (fmt->pad == CCP2_PAD_SINK) {
 787                 format = __ccp2_get_format(ccp2, cfg, CCP2_PAD_SOURCE,
 788                                            fmt->which);
 789                 *format = fmt->format;
 790                 ccp2_try_format(ccp2, cfg, CCP2_PAD_SOURCE, format, fmt->which);
 791         }
 792
 793         return 0;
 794 }
 795
 796 /*
 797  * ccp2_init_formats - Initialize formats on all pads
 798  * @sd: ISP CCP2 V4L2 subdevice
 799  * @fh: V4L2 subdev file handle
 800  *
 801  * Initialize all pad formats with default values. If fh is not NULL, try
 802  * formats are initialized on the file handle. Otherwise active formats are
 803  * initialized on the device.
 804  */
 805 static int ccp2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 806 {
 807         struct v4l2_subdev_format format;
 808
 809         memset(&format, 0, sizeof(format));
 810         format.pad = CCP2_PAD_SINK;
 811         format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
 812         format.format.code = MEDIA_BUS_FMT_SGRBG10_1X10;
 813         format.format.width = 4096;
 814         format.format.height = 4096;
 815         ccp2_set_format(sd, fh ? fh->pad : NULL, &format);
 816
 817         return 0;
 818 }
 819
 820 /*
 821  * ccp2_s_stream - Enable/Disable streaming on ccp2 subdev
 822  * @sd    : pointer to v4l2 subdev structure
 823  * @enable: 1 == Enable, 0 == Disable
 824  * return zero
 825  */
 826 static int ccp2_s_stream(struct v4l2_subdev *sd, int enable)
 827 {
 828         struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
 829         struct isp_device *isp = to_isp_device(ccp2);
 830         struct device *dev = to_device(ccp2);
 831         int ret;
 832
 833         if (ccp2->state == ISP_PIPELINE_STREAM_STOPPED) {
 834                 if (enable == ISP_PIPELINE_STREAM_STOPPED)
 835                         return 0;
 836                 atomic_set(&ccp2->stopping, 0);
 837         }
 838
 839         switch (enable) {
 840         case ISP_PIPELINE_STREAM_CONTINUOUS:
 841                 if (ccp2->phy) {
 842                         ret = omap3isp_csiphy_acquire(ccp2->phy, &sd->entity);
 843                         if (ret < 0)
 844                                 return ret;
 845                 }
 846
 847                 ccp2_if_configure(ccp2);
 848                 ccp2_print_status(ccp2);
 849
 850                 /* Enable CSI1/CCP2 interface */
 851                 ret = ccp2_if_enable(ccp2, 1);
 852                 if (ret < 0) {
 853                         if (ccp2->phy)
 854                                 omap3isp_csiphy_release(ccp2->phy);
 855                         return ret;
 856                 }
 857                 break;
 858
 859         case ISP_PIPELINE_STREAM_SINGLESHOT:
 860                 if (ccp2->state != ISP_PIPELINE_STREAM_SINGLESHOT) {
 861                         struct v4l2_mbus_framefmt *format;
 862
 863                         format = &ccp2->formats[CCP2_PAD_SINK];
 864
 865                         ccp2->mem_cfg.hsize_count = format->width;
 866                         ccp2->mem_cfg.vsize_count = format->height;
 867                         ccp2->mem_cfg.src_ofst = 0;
 868
 869                         ccp2_mem_configure(ccp2, &ccp2->mem_cfg);
 870                         omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI1_READ);
 871                         ccp2_print_status(ccp2);
 872                 }
 873                 ccp2_mem_enable(ccp2, 1);
 874                 break;
 875
 876         case ISP_PIPELINE_STREAM_STOPPED:
 877                 if (omap3isp_module_sync_idle(&sd->entity, &ccp2->wait,
 878                                               &ccp2->stopping))
 879                         dev_dbg(dev, "%s: module stop timeout.\n", sd->name);
 880                 if (ccp2->input == CCP2_INPUT_MEMORY) {
 881                         ccp2_mem_enable(ccp2, 0);
 882                         omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI1_READ);
 883                 } else if (ccp2->input == CCP2_INPUT_SENSOR) {
 884                         /* Disable CSI1/CCP2 interface */
 885                         ccp2_if_enable(ccp2, 0);
 886                         if (ccp2->phy)
 887                                 omap3isp_csiphy_release(ccp2->phy);
 888                 }
 889                 break;
 890         }
 891
 892         ccp2->state = enable;
 893         return 0;
 894 }
 895
 896 /* subdev video operations */
 897 static const struct v4l2_subdev_video_ops ccp2_sd_video_ops = {
 898         .s_stream = ccp2_s_stream,
 899 };
 900
 901 /* subdev pad operations */
 902 static const struct v4l2_subdev_pad_ops ccp2_sd_pad_ops = {
 903         .enum_mbus_code = ccp2_enum_mbus_code,
 904         .enum_frame_size = ccp2_enum_frame_size,
 905         .get_fmt = ccp2_get_format,
 906         .set_fmt = ccp2_set_format,
 907 };
 908
 909 /* subdev operations */
 910 static const struct v4l2_subdev_ops ccp2_sd_ops = {
 911         .video = &ccp2_sd_video_ops,
 912         .pad = &ccp2_sd_pad_ops,
 913 };
 914
 915 /* subdev internal operations */
 916 static const struct v4l2_subdev_internal_ops ccp2_sd_internal_ops = {
 917         .open = ccp2_init_formats,
 918 };
 919
 920 /* --------------------------------------------------------------------------
 921  * ISP ccp2 video device node
 922  */
 923
 924 /*
 925  * ccp2_video_queue - Queue video buffer.
 926  * @video : Pointer to isp video structure
 927  * @buffer: Pointer to isp_buffer structure
 928  * return -EIO or zero on success
 929  */
 930 static int ccp2_video_queue(struct isp_video *video, struct isp_buffer *buffer)
 931 {
 932         struct isp_ccp2_device *ccp2 = &video->isp->isp_ccp2;
 933
 934         ccp2_set_inaddr(ccp2, buffer->dma);
 935         return 0;
 936 }
 937
 938 static const struct isp_video_operations ccp2_video_ops = {
 939         .queue = ccp2_video_queue,
 940 };
 941
 942 /* -----------------------------------------------------------------------------
 943  * Media entity operations
 944  */
 945
 946 /*
 947  * ccp2_link_setup - Setup ccp2 connections.
 948  * @entity : Pointer to media entity structure
 949  * @local  : Pointer to local pad array
 950  * @remote : Pointer to remote pad array
 951  * @flags  : Link flags
 952  * return -EINVAL on error or zero on success
 953  */
 954 static int ccp2_link_setup(struct media_entity *entity,
 955                            const struct media_pad *local,
 956                            const struct media_pad *remote, u32 flags)
 957 {
 958         struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
 959         struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd);
 960         unsigned int index = local->index;
 961
 962         /* FIXME: this is actually a hack! */
 963         if (is_media_entity_v4l2_subdev(remote->entity))
 964                 index |= 2 << 16;
 965
 966         switch (index) {
 967         case CCP2_PAD_SINK:
 968                 /* read from memory */
 969                 if (flags & MEDIA_LNK_FL_ENABLED) {
 970                         if (ccp2->input == CCP2_INPUT_SENSOR)
 971                                 return -EBUSY;
 972                         ccp2->input = CCP2_INPUT_MEMORY;
 973                 } else {
 974                         if (ccp2->input == CCP2_INPUT_MEMORY)
 975                                 ccp2->input = CCP2_INPUT_NONE;
 976                 }
 977                 break;
 978
 979         case CCP2_PAD_SINK | 2 << 16:
 980                 /* read from sensor/phy */
 981                 if (flags & MEDIA_LNK_FL_ENABLED) {
 982                         if (ccp2->input == CCP2_INPUT_MEMORY)
 983                                 return -EBUSY;
 984                         ccp2->input = CCP2_INPUT_SENSOR;
 985                 } else {
 986                         if (ccp2->input == CCP2_INPUT_SENSOR)
 987                                 ccp2->input = CCP2_INPUT_NONE;
 988                 } break;
 989
 990         case CCP2_PAD_SOURCE | 2 << 16:
 991                 /* write to video port/ccdc */
 992                 if (flags & MEDIA_LNK_FL_ENABLED)
 993                         ccp2->output = CCP2_OUTPUT_CCDC;
 994                 else
 995                         ccp2->output = CCP2_OUTPUT_NONE;
 996                 break;
 997
 998         default:
 999                 return -EINVAL;
1000         }
1001
1002         return 0;
1003 }
1004
1005 /* media operations */
1006 static const struct media_entity_operations ccp2_media_ops = {
1007         .link_setup = ccp2_link_setup,
1008         .link_validate = v4l2_subdev_link_validate,
1009 };
1010
1011 /*
1012  * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev
1013  * @ccp2: Pointer to ISP CCP2 device
1014  */
1015 void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2)
1016 {
1017         v4l2_device_unregister_subdev(&ccp2->subdev);
1018         omap3isp_video_unregister(&ccp2->video_in);
1019 }
1020
1021 /*
1022  * omap3isp_ccp2_register_entities - Register the subdev media entity
1023  * @ccp2: Pointer to ISP CCP2 device
1024  * @vdev: Pointer to v4l device
1025  * return negative error code or zero on success
1026  */
1027
1028 int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2,
1029                                     struct v4l2_device *vdev)
1030 {
1031         int ret;
1032
1033         /* Register the subdev and video nodes. */
1034         ccp2->subdev.dev = vdev->mdev->dev;
1035         ret = v4l2_device_register_subdev(vdev, &ccp2->subdev);
1036         if (ret < 0)
1037                 goto error;
1038
1039         ret = omap3isp_video_register(&ccp2->video_in, vdev);
1040         if (ret < 0)
1041                 goto error;
1042
1043         return 0;
1044
1045 error:
1046         omap3isp_ccp2_unregister_entities(ccp2);
1047         return ret;
1048 }
1049
1050 /* -----------------------------------------------------------------------------
1051  * ISP ccp2 initialisation and cleanup
1052  */
1053
1054 /*
1055  * ccp2_init_entities - Initialize ccp2 subdev and media entity.
1056  * @ccp2: Pointer to ISP CCP2 device
1057  * return negative error code or zero on success
1058  */
1059 static int ccp2_init_entities(struct isp_ccp2_device *ccp2)
1060 {
1061         struct v4l2_subdev *sd = &ccp2->subdev;
1062         struct media_pad *pads = ccp2->pads;
1063         struct media_entity *me = &sd->entity;
1064         int ret;
1065
1066         ccp2->input = CCP2_INPUT_NONE;
1067         ccp2->output = CCP2_OUTPUT_NONE;
1068
1069         v4l2_subdev_init(sd, &ccp2_sd_ops);
1070         sd->internal_ops = &ccp2_sd_internal_ops;
1071         strscpy(sd->name, "OMAP3 ISP CCP2", sizeof(sd->name));
1072         sd->grp_id = 1 << 16;   /* group ID for isp subdevs */
1073         v4l2_set_subdevdata(sd, ccp2);
1074         sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
1075
1076         pads[CCP2_PAD_SINK].flags = MEDIA_PAD_FL_SINK
1077                                     | MEDIA_PAD_FL_MUST_CONNECT;
1078         pads[CCP2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE;
1079
1080         me->ops = &ccp2_media_ops;
1081         ret = media_entity_pads_init(me, CCP2_PADS_NUM, pads);
1082         if (ret < 0)
1083                 return ret;
1084
1085         ccp2_init_formats(sd, NULL);
1086
1087         /*
1088          * The CCP2 has weird line alignment requirements, possibly caused by
1089          * DPCM8 decompression. Line length for data read from memory must be a
1090          * multiple of 128 bits (16 bytes) in continuous mode (when no padding
1091          * is present at end of lines). Additionally, if padding is used, the
1092          * padded line length must be a multiple of 32 bytes. To simplify the
1093          * implementation we use a fixed 32 bytes alignment regardless of the
1094          * input format and width. If strict 128 bits alignment support is
1095          * required ispvideo will need to be made aware of this special dual
1096          * alignment requirements.
1097          */
1098         ccp2->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
1099         ccp2->video_in.bpl_alignment = 32;
1100         ccp2->video_in.bpl_max = 0xffffffe0;
1101         ccp2->video_in.isp = to_isp_device(ccp2);
1102         ccp2->video_in.ops = &ccp2_video_ops;
1103         ccp2->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 3;
1104
1105         ret = omap3isp_video_init(&ccp2->video_in, "CCP2");
1106         if (ret < 0)
1107                 goto error;
1108
1109         return 0;
1110
1111 error:
1112         media_entity_cleanup(&ccp2->subdev.entity);
1113         return ret;
1114 }
1115
1116 /*
1117  * omap3isp_ccp2_init - CCP2 initialization.
1118  * @isp : Pointer to ISP device
1119  * return negative error code or zero on success
1120  */
1121 int omap3isp_ccp2_init(struct isp_device *isp)
1122 {
1123         struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
1124         int ret;
1125
1126         init_waitqueue_head(&ccp2->wait);
1127
1128         /*
1129          * On the OMAP34xx the CSI1 receiver is operated in the CSIb IO
1130          * complex, which is powered by vdds_csib power rail. Hence the
1131          * request for the regulator.
1132          *
1133          * On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with
1134          * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly
1135          * configured.
1136          *
1137          * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c).
1138          */
1139         if (isp->revision == ISP_REVISION_2_0) {
1140                 ccp2->vdds_csib = devm_regulator_get(isp->dev, "vdds_csib");
1141                 if (IS_ERR(ccp2->vdds_csib)) {
1142                         if (PTR_ERR(ccp2->vdds_csib) == -EPROBE_DEFER) {
1143                                 dev_dbg(isp->dev,
1144                                         "Can't get regulator vdds_csib, deferring probing\n");
1145                                 return -EPROBE_DEFER;
1146                         }
1147                         dev_dbg(isp->dev,
1148                                 "Could not get regulator vdds_csib\n");
1149                         ccp2->vdds_csib = NULL;
1150                 }
1151                 ccp2->phy = &isp->isp_csiphy2;
1152         } else if (isp->revision == ISP_REVISION_15_0) {
1153                 ccp2->phy = &isp->isp_csiphy1;
1154         }
1155
1156         ret = ccp2_init_entities(ccp2);
1157         if (ret < 0)
1158                 return ret;
1159
1160         ccp2_reset(ccp2);
1161         return 0;
1162 }
1163
1164 /*
1165  * omap3isp_ccp2_cleanup - CCP2 un-initialization
1166  * @isp : Pointer to ISP device
1167  */
1168 void omap3isp_ccp2_cleanup(struct isp_device *isp)
1169 {
1170         struct isp_ccp2_device *ccp2 = &isp->isp_ccp2;
1171
1172         omap3isp_video_cleanup(&ccp2->video_in);
1173         media_entity_cleanup(&ccp2->subdev.entity);
1174 }