drivers/net/ethernet/qualcomm/rmnet/rmnet_map_command.c

   1 /* Copyright (c) 2013-2018, The Linux Foundation. All rights reserved.
   2  *
   3  * This program is free software; you can redistribute it and/or modify
   4  * it under the terms of the GNU General Public License version 2 and
   5  * only version 2 as published by the Free Software Foundation.
   6  *
   7  * This program is distributed in the hope that it will be useful,
   8  * but WITHOUT ANY WARRANTY; without even the implied warranty of
   9  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  10  * GNU General Public License for more details.
  11  */
  12
  13 #include <linux/netdevice.h>
  14 #include "rmnet_config.h"
  15 #include "rmnet_map.h"
  16 #include "rmnet_private.h"
  17 #include "rmnet_vnd.h"
  18
  19 static u8 rmnet_map_do_flow_control(struct sk_buff *skb,
  20                                     struct rmnet_port *port,
  21                                     int enable)
  22 {
  23         struct rmnet_map_control_command *cmd;
  24         struct rmnet_endpoint *ep;
  25         struct net_device *vnd;
  26         u16 ip_family;
  27         u16 fc_seq;
  28         u32 qos_id;
  29         u8 mux_id;
  30         int r;
  31
  32         mux_id = RMNET_MAP_GET_MUX_ID(skb);
  33         cmd = RMNET_MAP_GET_CMD_START(skb);
  34
  35         if (mux_id >= RMNET_MAX_LOGICAL_EP) {
  36                 kfree_skb(skb);
  37                 return RX_HANDLER_CONSUMED;
  38         }
  39
  40         ep = rmnet_get_endpoint(port, mux_id);
  41         if (!ep) {
  42                 kfree_skb(skb);
  43                 return RX_HANDLER_CONSUMED;
  44         }
  45
  46         vnd = ep->egress_dev;
  47
  48         ip_family = cmd->flow_control.ip_family;
  49         fc_seq = ntohs(cmd->flow_control.flow_control_seq_num);
  50         qos_id = ntohl(cmd->flow_control.qos_id);
  51
  52         /* Ignore the ip family and pass the sequence number for both v4 and v6
  53          * sequence. User space does not support creating dedicated flows for
  54          * the 2 protocols
  55          */
  56         r = rmnet_vnd_do_flow_control(vnd, enable);
  57         if (r) {
  58                 kfree_skb(skb);
  59                 return RMNET_MAP_COMMAND_UNSUPPORTED;
  60         } else {
  61                 return RMNET_MAP_COMMAND_ACK;
  62         }
  63 }
  64
  65 static void rmnet_map_send_ack(struct sk_buff *skb,
  66                                unsigned char type,
  67                                struct rmnet_port *port)
  68 {
  69         struct rmnet_map_control_command *cmd;
  70         int xmit_status;
  71
  72         if (port->data_format & RMNET_FLAGS_INGRESS_MAP_CKSUMV4) {
  73                 if (skb->len < sizeof(struct rmnet_map_header) +
  74                     RMNET_MAP_GET_LENGTH(skb) +
  75                     sizeof(struct rmnet_map_dl_csum_trailer)) {
  76                         kfree_skb(skb);
  77                         return;
  78                 }
  79
  80                 skb_trim(skb, skb->len -
  81                          sizeof(struct rmnet_map_dl_csum_trailer));
  82         }
  83
  84         skb->protocol = htons(ETH_P_MAP);
  85
  86         cmd = RMNET_MAP_GET_CMD_START(skb);
  87         cmd->cmd_type = type & 0x03;
  88
  89         netif_tx_lock(skb->dev);
  90         xmit_status = skb->dev->netdev_ops->ndo_start_xmit(skb, skb->dev);
  91         netif_tx_unlock(skb->dev);
  92 }
  93
  94 /* Process MAP command frame and send N/ACK message as appropriate. Message cmd
  95  * name is decoded here and appropriate handler is called.
  96  */
  97 void rmnet_map_command(struct sk_buff *skb, struct rmnet_port *port)
  98 {
  99         struct rmnet_map_control_command *cmd;
 100         unsigned char command_name;
 101         unsigned char rc = 0;
 102
 103         cmd = RMNET_MAP_GET_CMD_START(skb);
 104         command_name = cmd->command_name;
 105
 106         switch (command_name) {
 107         case RMNET_MAP_COMMAND_FLOW_ENABLE:
 108                 rc = rmnet_map_do_flow_control(skb, port, 1);
 109                 break;
 110
 111         case RMNET_MAP_COMMAND_FLOW_DISABLE:
 112                 rc = rmnet_map_do_flow_control(skb, port, 0);
 113                 break;
 114
 115         default:
 116                 rc = RMNET_MAP_COMMAND_UNSUPPORTED;
 117                 kfree_skb(skb);
 118                 break;
 119         }
 120         if (rc == RMNET_MAP_COMMAND_ACK)
 121                 rmnet_map_send_ack(skb, rc, port);
 122 }