]> asedeno.scripts.mit.edu Git - linux.git/blob - drivers/pci/pcie/aspm.c
Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
[linux.git] / drivers / pci / pcie / aspm.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Enable PCIe link L0s/L1 state and Clock Power Management
4  *
5  * Copyright (C) 2007 Intel
6  * Copyright (C) Zhang Yanmin (yanmin.zhang@intel.com)
7  * Copyright (C) Shaohua Li (shaohua.li@intel.com)
8  */
9
10 #include <linux/kernel.h>
11 #include <linux/module.h>
12 #include <linux/moduleparam.h>
13 #include <linux/pci.h>
14 #include <linux/pci_regs.h>
15 #include <linux/errno.h>
16 #include <linux/pm.h>
17 #include <linux/init.h>
18 #include <linux/slab.h>
19 #include <linux/jiffies.h>
20 #include <linux/delay.h>
21 #include "../pci.h"
22
23 #ifdef MODULE_PARAM_PREFIX
24 #undef MODULE_PARAM_PREFIX
25 #endif
26 #define MODULE_PARAM_PREFIX "pcie_aspm."
27
28 /* Note: those are not register definitions */
29 #define ASPM_STATE_L0S_UP       (1)     /* Upstream direction L0s state */
30 #define ASPM_STATE_L0S_DW       (2)     /* Downstream direction L0s state */
31 #define ASPM_STATE_L1           (4)     /* L1 state */
32 #define ASPM_STATE_L1_1         (8)     /* ASPM L1.1 state */
33 #define ASPM_STATE_L1_2         (0x10)  /* ASPM L1.2 state */
34 #define ASPM_STATE_L1_1_PCIPM   (0x20)  /* PCI PM L1.1 state */
35 #define ASPM_STATE_L1_2_PCIPM   (0x40)  /* PCI PM L1.2 state */
36 #define ASPM_STATE_L1_SS_PCIPM  (ASPM_STATE_L1_1_PCIPM | ASPM_STATE_L1_2_PCIPM)
37 #define ASPM_STATE_L1_2_MASK    (ASPM_STATE_L1_2 | ASPM_STATE_L1_2_PCIPM)
38 #define ASPM_STATE_L1SS         (ASPM_STATE_L1_1 | ASPM_STATE_L1_1_PCIPM |\
39                                  ASPM_STATE_L1_2_MASK)
40 #define ASPM_STATE_L0S          (ASPM_STATE_L0S_UP | ASPM_STATE_L0S_DW)
41 #define ASPM_STATE_ALL          (ASPM_STATE_L0S | ASPM_STATE_L1 |       \
42                                  ASPM_STATE_L1SS)
43
44 struct aspm_latency {
45         u32 l0s;                        /* L0s latency (nsec) */
46         u32 l1;                         /* L1 latency (nsec) */
47 };
48
49 struct pcie_link_state {
50         struct pci_dev *pdev;           /* Upstream component of the Link */
51         struct pci_dev *downstream;     /* Downstream component, function 0 */
52         struct pcie_link_state *root;   /* pointer to the root port link */
53         struct pcie_link_state *parent; /* pointer to the parent Link state */
54         struct list_head sibling;       /* node in link_list */
55
56         /* ASPM state */
57         u32 aspm_support:7;             /* Supported ASPM state */
58         u32 aspm_enabled:7;             /* Enabled ASPM state */
59         u32 aspm_capable:7;             /* Capable ASPM state with latency */
60         u32 aspm_default:7;             /* Default ASPM state by BIOS */
61         u32 aspm_disable:7;             /* Disabled ASPM state */
62
63         /* Clock PM state */
64         u32 clkpm_capable:1;            /* Clock PM capable? */
65         u32 clkpm_enabled:1;            /* Current Clock PM state */
66         u32 clkpm_default:1;            /* Default Clock PM state by BIOS */
67         u32 clkpm_disable:1;            /* Clock PM disabled */
68
69         /* Exit latencies */
70         struct aspm_latency latency_up; /* Upstream direction exit latency */
71         struct aspm_latency latency_dw; /* Downstream direction exit latency */
72         /*
73          * Endpoint acceptable latencies. A pcie downstream port only
74          * has one slot under it, so at most there are 8 functions.
75          */
76         struct aspm_latency acceptable[8];
77
78         /* L1 PM Substate info */
79         struct {
80                 u32 up_cap_ptr;         /* L1SS cap ptr in upstream dev */
81                 u32 dw_cap_ptr;         /* L1SS cap ptr in downstream dev */
82                 u32 ctl1;               /* value to be programmed in ctl1 */
83                 u32 ctl2;               /* value to be programmed in ctl2 */
84         } l1ss;
85 };
86
87 static int aspm_disabled, aspm_force;
88 static bool aspm_support_enabled = true;
89 static DEFINE_MUTEX(aspm_lock);
90 static LIST_HEAD(link_list);
91
92 #define POLICY_DEFAULT 0        /* BIOS default setting */
93 #define POLICY_PERFORMANCE 1    /* high performance */
94 #define POLICY_POWERSAVE 2      /* high power saving */
95 #define POLICY_POWER_SUPERSAVE 3 /* possibly even more power saving */
96
97 #ifdef CONFIG_PCIEASPM_PERFORMANCE
98 static int aspm_policy = POLICY_PERFORMANCE;
99 #elif defined CONFIG_PCIEASPM_POWERSAVE
100 static int aspm_policy = POLICY_POWERSAVE;
101 #elif defined CONFIG_PCIEASPM_POWER_SUPERSAVE
102 static int aspm_policy = POLICY_POWER_SUPERSAVE;
103 #else
104 static int aspm_policy;
105 #endif
106
107 static const char *policy_str[] = {
108         [POLICY_DEFAULT] = "default",
109         [POLICY_PERFORMANCE] = "performance",
110         [POLICY_POWERSAVE] = "powersave",
111         [POLICY_POWER_SUPERSAVE] = "powersupersave"
112 };
113
114 #define LINK_RETRAIN_TIMEOUT HZ
115
116 static int policy_to_aspm_state(struct pcie_link_state *link)
117 {
118         switch (aspm_policy) {
119         case POLICY_PERFORMANCE:
120                 /* Disable ASPM and Clock PM */
121                 return 0;
122         case POLICY_POWERSAVE:
123                 /* Enable ASPM L0s/L1 */
124                 return (ASPM_STATE_L0S | ASPM_STATE_L1);
125         case POLICY_POWER_SUPERSAVE:
126                 /* Enable Everything */
127                 return ASPM_STATE_ALL;
128         case POLICY_DEFAULT:
129                 return link->aspm_default;
130         }
131         return 0;
132 }
133
134 static int policy_to_clkpm_state(struct pcie_link_state *link)
135 {
136         switch (aspm_policy) {
137         case POLICY_PERFORMANCE:
138                 /* Disable ASPM and Clock PM */
139                 return 0;
140         case POLICY_POWERSAVE:
141         case POLICY_POWER_SUPERSAVE:
142                 /* Enable Clock PM */
143                 return 1;
144         case POLICY_DEFAULT:
145                 return link->clkpm_default;
146         }
147         return 0;
148 }
149
150 static void pcie_set_clkpm_nocheck(struct pcie_link_state *link, int enable)
151 {
152         struct pci_dev *child;
153         struct pci_bus *linkbus = link->pdev->subordinate;
154         u32 val = enable ? PCI_EXP_LNKCTL_CLKREQ_EN : 0;
155
156         list_for_each_entry(child, &linkbus->devices, bus_list)
157                 pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
158                                                    PCI_EXP_LNKCTL_CLKREQ_EN,
159                                                    val);
160         link->clkpm_enabled = !!enable;
161 }
162
163 static void pcie_set_clkpm(struct pcie_link_state *link, int enable)
164 {
165         /*
166          * Don't enable Clock PM if the link is not Clock PM capable
167          * or Clock PM is disabled
168          */
169         if (!link->clkpm_capable || link->clkpm_disable)
170                 enable = 0;
171         /* Need nothing if the specified equals to current state */
172         if (link->clkpm_enabled == enable)
173                 return;
174         pcie_set_clkpm_nocheck(link, enable);
175 }
176
177 static void pcie_clkpm_cap_init(struct pcie_link_state *link, int blacklist)
178 {
179         int capable = 1, enabled = 1;
180         u32 reg32;
181         u16 reg16;
182         struct pci_dev *child;
183         struct pci_bus *linkbus = link->pdev->subordinate;
184
185         /* All functions should have the same cap and state, take the worst */
186         list_for_each_entry(child, &linkbus->devices, bus_list) {
187                 pcie_capability_read_dword(child, PCI_EXP_LNKCAP, &reg32);
188                 if (!(reg32 & PCI_EXP_LNKCAP_CLKPM)) {
189                         capable = 0;
190                         enabled = 0;
191                         break;
192                 }
193                 pcie_capability_read_word(child, PCI_EXP_LNKCTL, &reg16);
194                 if (!(reg16 & PCI_EXP_LNKCTL_CLKREQ_EN))
195                         enabled = 0;
196         }
197         link->clkpm_enabled = enabled;
198         link->clkpm_default = enabled;
199         link->clkpm_capable = capable;
200         link->clkpm_disable = blacklist ? 1 : 0;
201 }
202
203 static bool pcie_retrain_link(struct pcie_link_state *link)
204 {
205         struct pci_dev *parent = link->pdev;
206         unsigned long end_jiffies;
207         u16 reg16;
208
209         pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
210         reg16 |= PCI_EXP_LNKCTL_RL;
211         pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
212         if (parent->clear_retrain_link) {
213                 /*
214                  * Due to an erratum in some devices the Retrain Link bit
215                  * needs to be cleared again manually to allow the link
216                  * training to succeed.
217                  */
218                 reg16 &= ~PCI_EXP_LNKCTL_RL;
219                 pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
220         }
221
222         /* Wait for link training end. Break out after waiting for timeout */
223         end_jiffies = jiffies + LINK_RETRAIN_TIMEOUT;
224         do {
225                 pcie_capability_read_word(parent, PCI_EXP_LNKSTA, &reg16);
226                 if (!(reg16 & PCI_EXP_LNKSTA_LT))
227                         break;
228                 msleep(1);
229         } while (time_before(jiffies, end_jiffies));
230         return !(reg16 & PCI_EXP_LNKSTA_LT);
231 }
232
233 /*
234  * pcie_aspm_configure_common_clock: check if the 2 ends of a link
235  *   could use common clock. If they are, configure them to use the
236  *   common clock. That will reduce the ASPM state exit latency.
237  */
238 static void pcie_aspm_configure_common_clock(struct pcie_link_state *link)
239 {
240         int same_clock = 1;
241         u16 reg16, parent_reg, child_reg[8];
242         struct pci_dev *child, *parent = link->pdev;
243         struct pci_bus *linkbus = parent->subordinate;
244         /*
245          * All functions of a slot should have the same Slot Clock
246          * Configuration, so just check one function
247          */
248         child = list_entry(linkbus->devices.next, struct pci_dev, bus_list);
249         BUG_ON(!pci_is_pcie(child));
250
251         /* Check downstream component if bit Slot Clock Configuration is 1 */
252         pcie_capability_read_word(child, PCI_EXP_LNKSTA, &reg16);
253         if (!(reg16 & PCI_EXP_LNKSTA_SLC))
254                 same_clock = 0;
255
256         /* Check upstream component if bit Slot Clock Configuration is 1 */
257         pcie_capability_read_word(parent, PCI_EXP_LNKSTA, &reg16);
258         if (!(reg16 & PCI_EXP_LNKSTA_SLC))
259                 same_clock = 0;
260
261         /* Port might be already in common clock mode */
262         pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
263         if (same_clock && (reg16 & PCI_EXP_LNKCTL_CCC)) {
264                 bool consistent = true;
265
266                 list_for_each_entry(child, &linkbus->devices, bus_list) {
267                         pcie_capability_read_word(child, PCI_EXP_LNKCTL,
268                                                   &reg16);
269                         if (!(reg16 & PCI_EXP_LNKCTL_CCC)) {
270                                 consistent = false;
271                                 break;
272                         }
273                 }
274                 if (consistent)
275                         return;
276                 pci_warn(parent, "ASPM: current common clock configuration is broken, reconfiguring\n");
277         }
278
279         /* Configure downstream component, all functions */
280         list_for_each_entry(child, &linkbus->devices, bus_list) {
281                 pcie_capability_read_word(child, PCI_EXP_LNKCTL, &reg16);
282                 child_reg[PCI_FUNC(child->devfn)] = reg16;
283                 if (same_clock)
284                         reg16 |= PCI_EXP_LNKCTL_CCC;
285                 else
286                         reg16 &= ~PCI_EXP_LNKCTL_CCC;
287                 pcie_capability_write_word(child, PCI_EXP_LNKCTL, reg16);
288         }
289
290         /* Configure upstream component */
291         pcie_capability_read_word(parent, PCI_EXP_LNKCTL, &reg16);
292         parent_reg = reg16;
293         if (same_clock)
294                 reg16 |= PCI_EXP_LNKCTL_CCC;
295         else
296                 reg16 &= ~PCI_EXP_LNKCTL_CCC;
297         pcie_capability_write_word(parent, PCI_EXP_LNKCTL, reg16);
298
299         if (pcie_retrain_link(link))
300                 return;
301
302         /* Training failed. Restore common clock configurations */
303         pci_err(parent, "ASPM: Could not configure common clock\n");
304         list_for_each_entry(child, &linkbus->devices, bus_list)
305                 pcie_capability_write_word(child, PCI_EXP_LNKCTL,
306                                            child_reg[PCI_FUNC(child->devfn)]);
307         pcie_capability_write_word(parent, PCI_EXP_LNKCTL, parent_reg);
308 }
309
310 /* Convert L0s latency encoding to ns */
311 static u32 calc_l0s_latency(u32 encoding)
312 {
313         if (encoding == 0x7)
314                 return (5 * 1000);      /* > 4us */
315         return (64 << encoding);
316 }
317
318 /* Convert L0s acceptable latency encoding to ns */
319 static u32 calc_l0s_acceptable(u32 encoding)
320 {
321         if (encoding == 0x7)
322                 return -1U;
323         return (64 << encoding);
324 }
325
326 /* Convert L1 latency encoding to ns */
327 static u32 calc_l1_latency(u32 encoding)
328 {
329         if (encoding == 0x7)
330                 return (65 * 1000);     /* > 64us */
331         return (1000 << encoding);
332 }
333
334 /* Convert L1 acceptable latency encoding to ns */
335 static u32 calc_l1_acceptable(u32 encoding)
336 {
337         if (encoding == 0x7)
338                 return -1U;
339         return (1000 << encoding);
340 }
341
342 /* Convert L1SS T_pwr encoding to usec */
343 static u32 calc_l1ss_pwron(struct pci_dev *pdev, u32 scale, u32 val)
344 {
345         switch (scale) {
346         case 0:
347                 return val * 2;
348         case 1:
349                 return val * 10;
350         case 2:
351                 return val * 100;
352         }
353         pci_err(pdev, "%s: Invalid T_PwrOn scale: %u\n", __func__, scale);
354         return 0;
355 }
356
357 static void encode_l12_threshold(u32 threshold_us, u32 *scale, u32 *value)
358 {
359         u32 threshold_ns = threshold_us * 1000;
360
361         /* See PCIe r3.1, sec 7.33.3 and sec 6.18 */
362         if (threshold_ns < 32) {
363                 *scale = 0;
364                 *value = threshold_ns;
365         } else if (threshold_ns < 1024) {
366                 *scale = 1;
367                 *value = threshold_ns >> 5;
368         } else if (threshold_ns < 32768) {
369                 *scale = 2;
370                 *value = threshold_ns >> 10;
371         } else if (threshold_ns < 1048576) {
372                 *scale = 3;
373                 *value = threshold_ns >> 15;
374         } else if (threshold_ns < 33554432) {
375                 *scale = 4;
376                 *value = threshold_ns >> 20;
377         } else {
378                 *scale = 5;
379                 *value = threshold_ns >> 25;
380         }
381 }
382
383 struct aspm_register_info {
384         u32 support:2;
385         u32 enabled:2;
386         u32 latency_encoding_l0s;
387         u32 latency_encoding_l1;
388
389         /* L1 substates */
390         u32 l1ss_cap_ptr;
391         u32 l1ss_cap;
392         u32 l1ss_ctl1;
393         u32 l1ss_ctl2;
394 };
395
396 static void pcie_get_aspm_reg(struct pci_dev *pdev,
397                               struct aspm_register_info *info)
398 {
399         u16 reg16;
400         u32 reg32;
401
402         pcie_capability_read_dword(pdev, PCI_EXP_LNKCAP, &reg32);
403         info->support = (reg32 & PCI_EXP_LNKCAP_ASPMS) >> 10;
404         info->latency_encoding_l0s = (reg32 & PCI_EXP_LNKCAP_L0SEL) >> 12;
405         info->latency_encoding_l1  = (reg32 & PCI_EXP_LNKCAP_L1EL) >> 15;
406         pcie_capability_read_word(pdev, PCI_EXP_LNKCTL, &reg16);
407         info->enabled = reg16 & PCI_EXP_LNKCTL_ASPMC;
408
409         /* Read L1 PM substate capabilities */
410         info->l1ss_cap = info->l1ss_ctl1 = info->l1ss_ctl2 = 0;
411         info->l1ss_cap_ptr = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
412         if (!info->l1ss_cap_ptr)
413                 return;
414         pci_read_config_dword(pdev, info->l1ss_cap_ptr + PCI_L1SS_CAP,
415                               &info->l1ss_cap);
416         if (!(info->l1ss_cap & PCI_L1SS_CAP_L1_PM_SS)) {
417                 info->l1ss_cap = 0;
418                 return;
419         }
420
421         /*
422          * If we don't have LTR for the entire path from the Root Complex
423          * to this device, we can't use ASPM L1.2 because it relies on the
424          * LTR_L1.2_THRESHOLD.  See PCIe r4.0, secs 5.5.4, 6.18.
425          */
426         if (!pdev->ltr_path)
427                 info->l1ss_cap &= ~PCI_L1SS_CAP_ASPM_L1_2;
428
429         pci_read_config_dword(pdev, info->l1ss_cap_ptr + PCI_L1SS_CTL1,
430                               &info->l1ss_ctl1);
431         pci_read_config_dword(pdev, info->l1ss_cap_ptr + PCI_L1SS_CTL2,
432                               &info->l1ss_ctl2);
433 }
434
435 static void pcie_aspm_check_latency(struct pci_dev *endpoint)
436 {
437         u32 latency, l1_switch_latency = 0;
438         struct aspm_latency *acceptable;
439         struct pcie_link_state *link;
440
441         /* Device not in D0 doesn't need latency check */
442         if ((endpoint->current_state != PCI_D0) &&
443             (endpoint->current_state != PCI_UNKNOWN))
444                 return;
445
446         link = endpoint->bus->self->link_state;
447         acceptable = &link->acceptable[PCI_FUNC(endpoint->devfn)];
448
449         while (link) {
450                 /* Check upstream direction L0s latency */
451                 if ((link->aspm_capable & ASPM_STATE_L0S_UP) &&
452                     (link->latency_up.l0s > acceptable->l0s))
453                         link->aspm_capable &= ~ASPM_STATE_L0S_UP;
454
455                 /* Check downstream direction L0s latency */
456                 if ((link->aspm_capable & ASPM_STATE_L0S_DW) &&
457                     (link->latency_dw.l0s > acceptable->l0s))
458                         link->aspm_capable &= ~ASPM_STATE_L0S_DW;
459                 /*
460                  * Check L1 latency.
461                  * Every switch on the path to root complex need 1
462                  * more microsecond for L1. Spec doesn't mention L0s.
463                  *
464                  * The exit latencies for L1 substates are not advertised
465                  * by a device.  Since the spec also doesn't mention a way
466                  * to determine max latencies introduced by enabling L1
467                  * substates on the components, it is not clear how to do
468                  * a L1 substate exit latency check.  We assume that the
469                  * L1 exit latencies advertised by a device include L1
470                  * substate latencies (and hence do not do any check).
471                  */
472                 latency = max_t(u32, link->latency_up.l1, link->latency_dw.l1);
473                 if ((link->aspm_capable & ASPM_STATE_L1) &&
474                     (latency + l1_switch_latency > acceptable->l1))
475                         link->aspm_capable &= ~ASPM_STATE_L1;
476                 l1_switch_latency += 1000;
477
478                 link = link->parent;
479         }
480 }
481
482 /*
483  * The L1 PM substate capability is only implemented in function 0 in a
484  * multi function device.
485  */
486 static struct pci_dev *pci_function_0(struct pci_bus *linkbus)
487 {
488         struct pci_dev *child;
489
490         list_for_each_entry(child, &linkbus->devices, bus_list)
491                 if (PCI_FUNC(child->devfn) == 0)
492                         return child;
493         return NULL;
494 }
495
496 /* Calculate L1.2 PM substate timing parameters */
497 static void aspm_calc_l1ss_info(struct pcie_link_state *link,
498                                 struct aspm_register_info *upreg,
499                                 struct aspm_register_info *dwreg)
500 {
501         u32 val1, val2, scale1, scale2;
502         u32 t_common_mode, t_power_on, l1_2_threshold, scale, value;
503
504         link->l1ss.up_cap_ptr = upreg->l1ss_cap_ptr;
505         link->l1ss.dw_cap_ptr = dwreg->l1ss_cap_ptr;
506         link->l1ss.ctl1 = link->l1ss.ctl2 = 0;
507
508         if (!(link->aspm_support & ASPM_STATE_L1_2_MASK))
509                 return;
510
511         /* Choose the greater of the two Port Common_Mode_Restore_Times */
512         val1 = (upreg->l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
513         val2 = (dwreg->l1ss_cap & PCI_L1SS_CAP_CM_RESTORE_TIME) >> 8;
514         t_common_mode = max(val1, val2);
515
516         /* Choose the greater of the two Port T_POWER_ON times */
517         val1   = (upreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
518         scale1 = (upreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
519         val2   = (dwreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_VALUE) >> 19;
520         scale2 = (dwreg->l1ss_cap & PCI_L1SS_CAP_P_PWR_ON_SCALE) >> 16;
521
522         if (calc_l1ss_pwron(link->pdev, scale1, val1) >
523             calc_l1ss_pwron(link->downstream, scale2, val2)) {
524                 link->l1ss.ctl2 |= scale1 | (val1 << 3);
525                 t_power_on = calc_l1ss_pwron(link->pdev, scale1, val1);
526         } else {
527                 link->l1ss.ctl2 |= scale2 | (val2 << 3);
528                 t_power_on = calc_l1ss_pwron(link->downstream, scale2, val2);
529         }
530
531         /*
532          * Set LTR_L1.2_THRESHOLD to the time required to transition the
533          * Link from L0 to L1.2 and back to L0 so we enter L1.2 only if
534          * downstream devices report (via LTR) that they can tolerate at
535          * least that much latency.
536          *
537          * Based on PCIe r3.1, sec 5.5.3.3.1, Figures 5-16 and 5-17, and
538          * Table 5-11.  T(POWER_OFF) is at most 2us and T(L1.2) is at
539          * least 4us.
540          */
541         l1_2_threshold = 2 + 4 + t_common_mode + t_power_on;
542         encode_l12_threshold(l1_2_threshold, &scale, &value);
543         link->l1ss.ctl1 |= t_common_mode << 8 | scale << 29 | value << 16;
544 }
545
546 static void pcie_aspm_cap_init(struct pcie_link_state *link, int blacklist)
547 {
548         struct pci_dev *child = link->downstream, *parent = link->pdev;
549         struct pci_bus *linkbus = parent->subordinate;
550         struct aspm_register_info upreg, dwreg;
551
552         if (blacklist) {
553                 /* Set enabled/disable so that we will disable ASPM later */
554                 link->aspm_enabled = ASPM_STATE_ALL;
555                 link->aspm_disable = ASPM_STATE_ALL;
556                 return;
557         }
558
559         /* Get upstream/downstream components' register state */
560         pcie_get_aspm_reg(parent, &upreg);
561         pcie_get_aspm_reg(child, &dwreg);
562
563         /*
564          * If ASPM not supported, don't mess with the clocks and link,
565          * bail out now.
566          */
567         if (!(upreg.support & dwreg.support))
568                 return;
569
570         /* Configure common clock before checking latencies */
571         pcie_aspm_configure_common_clock(link);
572
573         /*
574          * Re-read upstream/downstream components' register state
575          * after clock configuration
576          */
577         pcie_get_aspm_reg(parent, &upreg);
578         pcie_get_aspm_reg(child, &dwreg);
579
580         /*
581          * Setup L0s state
582          *
583          * Note that we must not enable L0s in either direction on a
584          * given link unless components on both sides of the link each
585          * support L0s.
586          */
587         if (dwreg.support & upreg.support & PCIE_LINK_STATE_L0S)
588                 link->aspm_support |= ASPM_STATE_L0S;
589         if (dwreg.enabled & PCIE_LINK_STATE_L0S)
590                 link->aspm_enabled |= ASPM_STATE_L0S_UP;
591         if (upreg.enabled & PCIE_LINK_STATE_L0S)
592                 link->aspm_enabled |= ASPM_STATE_L0S_DW;
593         link->latency_up.l0s = calc_l0s_latency(upreg.latency_encoding_l0s);
594         link->latency_dw.l0s = calc_l0s_latency(dwreg.latency_encoding_l0s);
595
596         /* Setup L1 state */
597         if (upreg.support & dwreg.support & PCIE_LINK_STATE_L1)
598                 link->aspm_support |= ASPM_STATE_L1;
599         if (upreg.enabled & dwreg.enabled & PCIE_LINK_STATE_L1)
600                 link->aspm_enabled |= ASPM_STATE_L1;
601         link->latency_up.l1 = calc_l1_latency(upreg.latency_encoding_l1);
602         link->latency_dw.l1 = calc_l1_latency(dwreg.latency_encoding_l1);
603
604         /* Setup L1 substate */
605         if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_ASPM_L1_1)
606                 link->aspm_support |= ASPM_STATE_L1_1;
607         if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_ASPM_L1_2)
608                 link->aspm_support |= ASPM_STATE_L1_2;
609         if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_1)
610                 link->aspm_support |= ASPM_STATE_L1_1_PCIPM;
611         if (upreg.l1ss_cap & dwreg.l1ss_cap & PCI_L1SS_CAP_PCIPM_L1_2)
612                 link->aspm_support |= ASPM_STATE_L1_2_PCIPM;
613
614         if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_1)
615                 link->aspm_enabled |= ASPM_STATE_L1_1;
616         if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_ASPM_L1_2)
617                 link->aspm_enabled |= ASPM_STATE_L1_2;
618         if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_1)
619                 link->aspm_enabled |= ASPM_STATE_L1_1_PCIPM;
620         if (upreg.l1ss_ctl1 & dwreg.l1ss_ctl1 & PCI_L1SS_CTL1_PCIPM_L1_2)
621                 link->aspm_enabled |= ASPM_STATE_L1_2_PCIPM;
622
623         if (link->aspm_support & ASPM_STATE_L1SS)
624                 aspm_calc_l1ss_info(link, &upreg, &dwreg);
625
626         /* Save default state */
627         link->aspm_default = link->aspm_enabled;
628
629         /* Setup initial capable state. Will be updated later */
630         link->aspm_capable = link->aspm_support;
631         /*
632          * If the downstream component has pci bridge function, don't
633          * do ASPM for now.
634          */
635         list_for_each_entry(child, &linkbus->devices, bus_list) {
636                 if (pci_pcie_type(child) == PCI_EXP_TYPE_PCI_BRIDGE) {
637                         link->aspm_disable = ASPM_STATE_ALL;
638                         break;
639                 }
640         }
641
642         /* Get and check endpoint acceptable latencies */
643         list_for_each_entry(child, &linkbus->devices, bus_list) {
644                 u32 reg32, encoding;
645                 struct aspm_latency *acceptable =
646                         &link->acceptable[PCI_FUNC(child->devfn)];
647
648                 if (pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT &&
649                     pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END)
650                         continue;
651
652                 pcie_capability_read_dword(child, PCI_EXP_DEVCAP, &reg32);
653                 /* Calculate endpoint L0s acceptable latency */
654                 encoding = (reg32 & PCI_EXP_DEVCAP_L0S) >> 6;
655                 acceptable->l0s = calc_l0s_acceptable(encoding);
656                 /* Calculate endpoint L1 acceptable latency */
657                 encoding = (reg32 & PCI_EXP_DEVCAP_L1) >> 9;
658                 acceptable->l1 = calc_l1_acceptable(encoding);
659
660                 pcie_aspm_check_latency(child);
661         }
662 }
663
664 static void pci_clear_and_set_dword(struct pci_dev *pdev, int pos,
665                                     u32 clear, u32 set)
666 {
667         u32 val;
668
669         pci_read_config_dword(pdev, pos, &val);
670         val &= ~clear;
671         val |= set;
672         pci_write_config_dword(pdev, pos, val);
673 }
674
675 /* Configure the ASPM L1 substates */
676 static void pcie_config_aspm_l1ss(struct pcie_link_state *link, u32 state)
677 {
678         u32 val, enable_req;
679         struct pci_dev *child = link->downstream, *parent = link->pdev;
680         u32 up_cap_ptr = link->l1ss.up_cap_ptr;
681         u32 dw_cap_ptr = link->l1ss.dw_cap_ptr;
682
683         enable_req = (link->aspm_enabled ^ state) & state;
684
685         /*
686          * Here are the rules specified in the PCIe spec for enabling L1SS:
687          * - When enabling L1.x, enable bit at parent first, then at child
688          * - When disabling L1.x, disable bit at child first, then at parent
689          * - When enabling ASPM L1.x, need to disable L1
690          *   (at child followed by parent).
691          * - The ASPM/PCIPM L1.2 must be disabled while programming timing
692          *   parameters
693          *
694          * To keep it simple, disable all L1SS bits first, and later enable
695          * what is needed.
696          */
697
698         /* Disable all L1 substates */
699         pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1,
700                                 PCI_L1SS_CTL1_L1SS_MASK, 0);
701         pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
702                                 PCI_L1SS_CTL1_L1SS_MASK, 0);
703         /*
704          * If needed, disable L1, and it gets enabled later
705          * in pcie_config_aspm_link().
706          */
707         if (enable_req & (ASPM_STATE_L1_1 | ASPM_STATE_L1_2)) {
708                 pcie_capability_clear_and_set_word(child, PCI_EXP_LNKCTL,
709                                                    PCI_EXP_LNKCTL_ASPM_L1, 0);
710                 pcie_capability_clear_and_set_word(parent, PCI_EXP_LNKCTL,
711                                                    PCI_EXP_LNKCTL_ASPM_L1, 0);
712         }
713
714         if (enable_req & ASPM_STATE_L1_2_MASK) {
715
716                 /* Program T_POWER_ON times in both ports */
717                 pci_write_config_dword(parent, up_cap_ptr + PCI_L1SS_CTL2,
718                                        link->l1ss.ctl2);
719                 pci_write_config_dword(child, dw_cap_ptr + PCI_L1SS_CTL2,
720                                        link->l1ss.ctl2);
721
722                 /* Program Common_Mode_Restore_Time in upstream device */
723                 pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
724                                         PCI_L1SS_CTL1_CM_RESTORE_TIME,
725                                         link->l1ss.ctl1);
726
727                 /* Program LTR_L1.2_THRESHOLD time in both ports */
728                 pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
729                                         PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
730                                         PCI_L1SS_CTL1_LTR_L12_TH_SCALE,
731                                         link->l1ss.ctl1);
732                 pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1,
733                                         PCI_L1SS_CTL1_LTR_L12_TH_VALUE |
734                                         PCI_L1SS_CTL1_LTR_L12_TH_SCALE,
735                                         link->l1ss.ctl1);
736         }
737
738         val = 0;
739         if (state & ASPM_STATE_L1_1)
740                 val |= PCI_L1SS_CTL1_ASPM_L1_1;
741         if (state & ASPM_STATE_L1_2)
742                 val |= PCI_L1SS_CTL1_ASPM_L1_2;
743         if (state & ASPM_STATE_L1_1_PCIPM)
744                 val |= PCI_L1SS_CTL1_PCIPM_L1_1;
745         if (state & ASPM_STATE_L1_2_PCIPM)
746                 val |= PCI_L1SS_CTL1_PCIPM_L1_2;
747
748         /* Enable what we need to enable */
749         pci_clear_and_set_dword(parent, up_cap_ptr + PCI_L1SS_CTL1,
750                                 PCI_L1SS_CAP_L1_PM_SS, val);
751         pci_clear_and_set_dword(child, dw_cap_ptr + PCI_L1SS_CTL1,
752                                 PCI_L1SS_CAP_L1_PM_SS, val);
753 }
754
755 static void pcie_config_aspm_dev(struct pci_dev *pdev, u32 val)
756 {
757         pcie_capability_clear_and_set_word(pdev, PCI_EXP_LNKCTL,
758                                            PCI_EXP_LNKCTL_ASPMC, val);
759 }
760
761 static void pcie_config_aspm_link(struct pcie_link_state *link, u32 state)
762 {
763         u32 upstream = 0, dwstream = 0;
764         struct pci_dev *child = link->downstream, *parent = link->pdev;
765         struct pci_bus *linkbus = parent->subordinate;
766
767         /* Enable only the states that were not explicitly disabled */
768         state &= (link->aspm_capable & ~link->aspm_disable);
769
770         /* Can't enable any substates if L1 is not enabled */
771         if (!(state & ASPM_STATE_L1))
772                 state &= ~ASPM_STATE_L1SS;
773
774         /* Spec says both ports must be in D0 before enabling PCI PM substates*/
775         if (parent->current_state != PCI_D0 || child->current_state != PCI_D0) {
776                 state &= ~ASPM_STATE_L1_SS_PCIPM;
777                 state |= (link->aspm_enabled & ASPM_STATE_L1_SS_PCIPM);
778         }
779
780         /* Nothing to do if the link is already in the requested state */
781         if (link->aspm_enabled == state)
782                 return;
783         /* Convert ASPM state to upstream/downstream ASPM register state */
784         if (state & ASPM_STATE_L0S_UP)
785                 dwstream |= PCI_EXP_LNKCTL_ASPM_L0S;
786         if (state & ASPM_STATE_L0S_DW)
787                 upstream |= PCI_EXP_LNKCTL_ASPM_L0S;
788         if (state & ASPM_STATE_L1) {
789                 upstream |= PCI_EXP_LNKCTL_ASPM_L1;
790                 dwstream |= PCI_EXP_LNKCTL_ASPM_L1;
791         }
792
793         if (link->aspm_capable & ASPM_STATE_L1SS)
794                 pcie_config_aspm_l1ss(link, state);
795
796         /*
797          * Spec 2.0 suggests all functions should be configured the
798          * same setting for ASPM. Enabling ASPM L1 should be done in
799          * upstream component first and then downstream, and vice
800          * versa for disabling ASPM L1. Spec doesn't mention L0S.
801          */
802         if (state & ASPM_STATE_L1)
803                 pcie_config_aspm_dev(parent, upstream);
804         list_for_each_entry(child, &linkbus->devices, bus_list)
805                 pcie_config_aspm_dev(child, dwstream);
806         if (!(state & ASPM_STATE_L1))
807                 pcie_config_aspm_dev(parent, upstream);
808
809         link->aspm_enabled = state;
810 }
811
812 static void pcie_config_aspm_path(struct pcie_link_state *link)
813 {
814         while (link) {
815                 pcie_config_aspm_link(link, policy_to_aspm_state(link));
816                 link = link->parent;
817         }
818 }
819
820 static void free_link_state(struct pcie_link_state *link)
821 {
822         link->pdev->link_state = NULL;
823         kfree(link);
824 }
825
826 static int pcie_aspm_sanity_check(struct pci_dev *pdev)
827 {
828         struct pci_dev *child;
829         u32 reg32;
830
831         /*
832          * Some functions in a slot might not all be PCIe functions,
833          * very strange. Disable ASPM for the whole slot
834          */
835         list_for_each_entry(child, &pdev->subordinate->devices, bus_list) {
836                 if (!pci_is_pcie(child))
837                         return -EINVAL;
838
839                 /*
840                  * If ASPM is disabled then we're not going to change
841                  * the BIOS state. It's safe to continue even if it's a
842                  * pre-1.1 device
843                  */
844
845                 if (aspm_disabled)
846                         continue;
847
848                 /*
849                  * Disable ASPM for pre-1.1 PCIe device, we follow MS to use
850                  * RBER bit to determine if a function is 1.1 version device
851                  */
852                 pcie_capability_read_dword(child, PCI_EXP_DEVCAP, &reg32);
853                 if (!(reg32 & PCI_EXP_DEVCAP_RBER) && !aspm_force) {
854                         pci_info(child, "disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'\n");
855                         return -EINVAL;
856                 }
857         }
858         return 0;
859 }
860
861 static struct pcie_link_state *alloc_pcie_link_state(struct pci_dev *pdev)
862 {
863         struct pcie_link_state *link;
864
865         link = kzalloc(sizeof(*link), GFP_KERNEL);
866         if (!link)
867                 return NULL;
868
869         INIT_LIST_HEAD(&link->sibling);
870         link->pdev = pdev;
871         link->downstream = pci_function_0(pdev->subordinate);
872
873         /*
874          * Root Ports and PCI/PCI-X to PCIe Bridges are roots of PCIe
875          * hierarchies.  Note that some PCIe host implementations omit
876          * the root ports entirely, in which case a downstream port on
877          * a switch may become the root of the link state chain for all
878          * its subordinate endpoints.
879          */
880         if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT ||
881             pci_pcie_type(pdev) == PCI_EXP_TYPE_PCIE_BRIDGE ||
882             !pdev->bus->parent->self) {
883                 link->root = link;
884         } else {
885                 struct pcie_link_state *parent;
886
887                 parent = pdev->bus->parent->self->link_state;
888                 if (!parent) {
889                         kfree(link);
890                         return NULL;
891                 }
892
893                 link->parent = parent;
894                 link->root = link->parent->root;
895         }
896
897         list_add(&link->sibling, &link_list);
898         pdev->link_state = link;
899         return link;
900 }
901
902 static void pcie_aspm_update_sysfs_visibility(struct pci_dev *pdev)
903 {
904         struct pci_dev *child;
905
906         list_for_each_entry(child, &pdev->subordinate->devices, bus_list)
907                 sysfs_update_group(&child->dev.kobj, &aspm_ctrl_attr_group);
908 }
909
910 /*
911  * pcie_aspm_init_link_state: Initiate PCI express link state.
912  * It is called after the pcie and its children devices are scanned.
913  * @pdev: the root port or switch downstream port
914  */
915 void pcie_aspm_init_link_state(struct pci_dev *pdev)
916 {
917         struct pcie_link_state *link;
918         int blacklist = !!pcie_aspm_sanity_check(pdev);
919
920         if (!aspm_support_enabled)
921                 return;
922
923         if (pdev->link_state)
924                 return;
925
926         /*
927          * We allocate pcie_link_state for the component on the upstream
928          * end of a Link, so there's nothing to do unless this device is
929          * downstream port.
930          */
931         if (!pcie_downstream_port(pdev))
932                 return;
933
934         /* VIA has a strange chipset, root port is under a bridge */
935         if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT &&
936             pdev->bus->self)
937                 return;
938
939         down_read(&pci_bus_sem);
940         if (list_empty(&pdev->subordinate->devices))
941                 goto out;
942
943         mutex_lock(&aspm_lock);
944         link = alloc_pcie_link_state(pdev);
945         if (!link)
946                 goto unlock;
947         /*
948          * Setup initial ASPM state. Note that we need to configure
949          * upstream links also because capable state of them can be
950          * update through pcie_aspm_cap_init().
951          */
952         pcie_aspm_cap_init(link, blacklist);
953
954         /* Setup initial Clock PM state */
955         pcie_clkpm_cap_init(link, blacklist);
956
957         /*
958          * At this stage drivers haven't had an opportunity to change the
959          * link policy setting. Enabling ASPM on broken hardware can cripple
960          * it even before the driver has had a chance to disable ASPM, so
961          * default to a safe level right now. If we're enabling ASPM beyond
962          * the BIOS's expectation, we'll do so once pci_enable_device() is
963          * called.
964          */
965         if (aspm_policy != POLICY_POWERSAVE &&
966             aspm_policy != POLICY_POWER_SUPERSAVE) {
967                 pcie_config_aspm_path(link);
968                 pcie_set_clkpm(link, policy_to_clkpm_state(link));
969         }
970
971         pcie_aspm_update_sysfs_visibility(pdev);
972
973 unlock:
974         mutex_unlock(&aspm_lock);
975 out:
976         up_read(&pci_bus_sem);
977 }
978
979 /* Recheck latencies and update aspm_capable for links under the root */
980 static void pcie_update_aspm_capable(struct pcie_link_state *root)
981 {
982         struct pcie_link_state *link;
983         BUG_ON(root->parent);
984         list_for_each_entry(link, &link_list, sibling) {
985                 if (link->root != root)
986                         continue;
987                 link->aspm_capable = link->aspm_support;
988         }
989         list_for_each_entry(link, &link_list, sibling) {
990                 struct pci_dev *child;
991                 struct pci_bus *linkbus = link->pdev->subordinate;
992                 if (link->root != root)
993                         continue;
994                 list_for_each_entry(child, &linkbus->devices, bus_list) {
995                         if ((pci_pcie_type(child) != PCI_EXP_TYPE_ENDPOINT) &&
996                             (pci_pcie_type(child) != PCI_EXP_TYPE_LEG_END))
997                                 continue;
998                         pcie_aspm_check_latency(child);
999                 }
1000         }
1001 }
1002
1003 /* @pdev: the endpoint device */
1004 void pcie_aspm_exit_link_state(struct pci_dev *pdev)
1005 {
1006         struct pci_dev *parent = pdev->bus->self;
1007         struct pcie_link_state *link, *root, *parent_link;
1008
1009         if (!parent || !parent->link_state)
1010                 return;
1011
1012         down_read(&pci_bus_sem);
1013         mutex_lock(&aspm_lock);
1014         /*
1015          * All PCIe functions are in one slot, remove one function will remove
1016          * the whole slot, so just wait until we are the last function left.
1017          */
1018         if (!list_empty(&parent->subordinate->devices))
1019                 goto out;
1020
1021         link = parent->link_state;
1022         root = link->root;
1023         parent_link = link->parent;
1024
1025         /* All functions are removed, so just disable ASPM for the link */
1026         pcie_config_aspm_link(link, 0);
1027         list_del(&link->sibling);
1028         /* Clock PM is for endpoint device */
1029         free_link_state(link);
1030
1031         /* Recheck latencies and configure upstream links */
1032         if (parent_link) {
1033                 pcie_update_aspm_capable(root);
1034                 pcie_config_aspm_path(parent_link);
1035         }
1036 out:
1037         mutex_unlock(&aspm_lock);
1038         up_read(&pci_bus_sem);
1039 }
1040
1041 /* @pdev: the root port or switch downstream port */
1042 void pcie_aspm_pm_state_change(struct pci_dev *pdev)
1043 {
1044         struct pcie_link_state *link = pdev->link_state;
1045
1046         if (aspm_disabled || !link)
1047                 return;
1048         /*
1049          * Devices changed PM state, we should recheck if latency
1050          * meets all functions' requirement
1051          */
1052         down_read(&pci_bus_sem);
1053         mutex_lock(&aspm_lock);
1054         pcie_update_aspm_capable(link->root);
1055         pcie_config_aspm_path(link);
1056         mutex_unlock(&aspm_lock);
1057         up_read(&pci_bus_sem);
1058 }
1059
1060 void pcie_aspm_powersave_config_link(struct pci_dev *pdev)
1061 {
1062         struct pcie_link_state *link = pdev->link_state;
1063
1064         if (aspm_disabled || !link)
1065                 return;
1066
1067         if (aspm_policy != POLICY_POWERSAVE &&
1068             aspm_policy != POLICY_POWER_SUPERSAVE)
1069                 return;
1070
1071         down_read(&pci_bus_sem);
1072         mutex_lock(&aspm_lock);
1073         pcie_config_aspm_path(link);
1074         pcie_set_clkpm(link, policy_to_clkpm_state(link));
1075         mutex_unlock(&aspm_lock);
1076         up_read(&pci_bus_sem);
1077 }
1078
1079 static struct pcie_link_state *pcie_aspm_get_link(struct pci_dev *pdev)
1080 {
1081         struct pci_dev *bridge;
1082
1083         if (!pci_is_pcie(pdev))
1084                 return NULL;
1085
1086         bridge = pci_upstream_bridge(pdev);
1087         if (!bridge || !pci_is_pcie(bridge))
1088                 return NULL;
1089
1090         return bridge->link_state;
1091 }
1092
1093 static int __pci_disable_link_state(struct pci_dev *pdev, int state, bool sem)
1094 {
1095         struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1096
1097         if (!link)
1098                 return -EINVAL;
1099         /*
1100          * A driver requested that ASPM be disabled on this device, but
1101          * if we don't have permission to manage ASPM (e.g., on ACPI
1102          * systems we have to observe the FADT ACPI_FADT_NO_ASPM bit and
1103          * the _OSC method), we can't honor that request.  Windows has
1104          * a similar mechanism using "PciASPMOptOut", which is also
1105          * ignored in this situation.
1106          */
1107         if (aspm_disabled) {
1108                 pci_warn(pdev, "can't disable ASPM; OS doesn't have ASPM control\n");
1109                 return -EPERM;
1110         }
1111
1112         if (sem)
1113                 down_read(&pci_bus_sem);
1114         mutex_lock(&aspm_lock);
1115         if (state & PCIE_LINK_STATE_L0S)
1116                 link->aspm_disable |= ASPM_STATE_L0S;
1117         if (state & PCIE_LINK_STATE_L1)
1118                 /* L1 PM substates require L1 */
1119                 link->aspm_disable |= ASPM_STATE_L1 | ASPM_STATE_L1SS;
1120         if (state & PCIE_LINK_STATE_L1_1)
1121                 link->aspm_disable |= ASPM_STATE_L1_1;
1122         if (state & PCIE_LINK_STATE_L1_2)
1123                 link->aspm_disable |= ASPM_STATE_L1_2;
1124         if (state & PCIE_LINK_STATE_L1_1_PCIPM)
1125                 link->aspm_disable |= ASPM_STATE_L1_1_PCIPM;
1126         if (state & PCIE_LINK_STATE_L1_2_PCIPM)
1127                 link->aspm_disable |= ASPM_STATE_L1_2_PCIPM;
1128         pcie_config_aspm_link(link, policy_to_aspm_state(link));
1129
1130         if (state & PCIE_LINK_STATE_CLKPM)
1131                 link->clkpm_disable = 1;
1132         pcie_set_clkpm(link, policy_to_clkpm_state(link));
1133         mutex_unlock(&aspm_lock);
1134         if (sem)
1135                 up_read(&pci_bus_sem);
1136
1137         return 0;
1138 }
1139
1140 int pci_disable_link_state_locked(struct pci_dev *pdev, int state)
1141 {
1142         return __pci_disable_link_state(pdev, state, false);
1143 }
1144 EXPORT_SYMBOL(pci_disable_link_state_locked);
1145
1146 /**
1147  * pci_disable_link_state - Disable device's link state, so the link will
1148  * never enter specific states.  Note that if the BIOS didn't grant ASPM
1149  * control to the OS, this does nothing because we can't touch the LNKCTL
1150  * register. Returns 0 or a negative errno.
1151  *
1152  * @pdev: PCI device
1153  * @state: ASPM link state to disable
1154  */
1155 int pci_disable_link_state(struct pci_dev *pdev, int state)
1156 {
1157         return __pci_disable_link_state(pdev, state, true);
1158 }
1159 EXPORT_SYMBOL(pci_disable_link_state);
1160
1161 static int pcie_aspm_set_policy(const char *val,
1162                                 const struct kernel_param *kp)
1163 {
1164         int i;
1165         struct pcie_link_state *link;
1166
1167         if (aspm_disabled)
1168                 return -EPERM;
1169         i = sysfs_match_string(policy_str, val);
1170         if (i < 0)
1171                 return i;
1172         if (i == aspm_policy)
1173                 return 0;
1174
1175         down_read(&pci_bus_sem);
1176         mutex_lock(&aspm_lock);
1177         aspm_policy = i;
1178         list_for_each_entry(link, &link_list, sibling) {
1179                 pcie_config_aspm_link(link, policy_to_aspm_state(link));
1180                 pcie_set_clkpm(link, policy_to_clkpm_state(link));
1181         }
1182         mutex_unlock(&aspm_lock);
1183         up_read(&pci_bus_sem);
1184         return 0;
1185 }
1186
1187 static int pcie_aspm_get_policy(char *buffer, const struct kernel_param *kp)
1188 {
1189         int i, cnt = 0;
1190         for (i = 0; i < ARRAY_SIZE(policy_str); i++)
1191                 if (i == aspm_policy)
1192                         cnt += sprintf(buffer + cnt, "[%s] ", policy_str[i]);
1193                 else
1194                         cnt += sprintf(buffer + cnt, "%s ", policy_str[i]);
1195         return cnt;
1196 }
1197
1198 module_param_call(policy, pcie_aspm_set_policy, pcie_aspm_get_policy,
1199         NULL, 0644);
1200
1201 /**
1202  * pcie_aspm_enabled - Check if PCIe ASPM has been enabled for a device.
1203  * @pdev: Target device.
1204  *
1205  * Relies on the upstream bridge's link_state being valid.  The link_state
1206  * is deallocated only when the last child of the bridge (i.e., @pdev or a
1207  * sibling) is removed, and the caller should be holding a reference to
1208  * @pdev, so this should be safe.
1209  */
1210 bool pcie_aspm_enabled(struct pci_dev *pdev)
1211 {
1212         struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1213
1214         if (!link)
1215                 return false;
1216
1217         return link->aspm_enabled;
1218 }
1219 EXPORT_SYMBOL_GPL(pcie_aspm_enabled);
1220
1221 static ssize_t aspm_attr_show_common(struct device *dev,
1222                                      struct device_attribute *attr,
1223                                      char *buf, u8 state)
1224 {
1225         struct pci_dev *pdev = to_pci_dev(dev);
1226         struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1227
1228         return sprintf(buf, "%d\n", (link->aspm_enabled & state) ? 1 : 0);
1229 }
1230
1231 static ssize_t aspm_attr_store_common(struct device *dev,
1232                                       struct device_attribute *attr,
1233                                       const char *buf, size_t len, u8 state)
1234 {
1235         struct pci_dev *pdev = to_pci_dev(dev);
1236         struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1237         bool state_enable;
1238
1239         if (strtobool(buf, &state_enable) < 0)
1240                 return -EINVAL;
1241
1242         down_read(&pci_bus_sem);
1243         mutex_lock(&aspm_lock);
1244
1245         if (state_enable) {
1246                 link->aspm_disable &= ~state;
1247                 /* need to enable L1 for substates */
1248                 if (state & ASPM_STATE_L1SS)
1249                         link->aspm_disable &= ~ASPM_STATE_L1;
1250         } else {
1251                 link->aspm_disable |= state;
1252         }
1253
1254         pcie_config_aspm_link(link, policy_to_aspm_state(link));
1255
1256         mutex_unlock(&aspm_lock);
1257         up_read(&pci_bus_sem);
1258
1259         return len;
1260 }
1261
1262 #define ASPM_ATTR(_f, _s)                                               \
1263 static ssize_t _f##_show(struct device *dev,                            \
1264                          struct device_attribute *attr, char *buf)      \
1265 { return aspm_attr_show_common(dev, attr, buf, ASPM_STATE_##_s); }      \
1266                                                                         \
1267 static ssize_t _f##_store(struct device *dev,                           \
1268                           struct device_attribute *attr,                \
1269                           const char *buf, size_t len)                  \
1270 { return aspm_attr_store_common(dev, attr, buf, len, ASPM_STATE_##_s); }
1271
1272 ASPM_ATTR(l0s_aspm, L0S)
1273 ASPM_ATTR(l1_aspm, L1)
1274 ASPM_ATTR(l1_1_aspm, L1_1)
1275 ASPM_ATTR(l1_2_aspm, L1_2)
1276 ASPM_ATTR(l1_1_pcipm, L1_1_PCIPM)
1277 ASPM_ATTR(l1_2_pcipm, L1_2_PCIPM)
1278
1279 static ssize_t clkpm_show(struct device *dev,
1280                           struct device_attribute *attr, char *buf)
1281 {
1282         struct pci_dev *pdev = to_pci_dev(dev);
1283         struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1284
1285         return sprintf(buf, "%d\n", link->clkpm_enabled);
1286 }
1287
1288 static ssize_t clkpm_store(struct device *dev,
1289                            struct device_attribute *attr,
1290                            const char *buf, size_t len)
1291 {
1292         struct pci_dev *pdev = to_pci_dev(dev);
1293         struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1294         bool state_enable;
1295
1296         if (strtobool(buf, &state_enable) < 0)
1297                 return -EINVAL;
1298
1299         down_read(&pci_bus_sem);
1300         mutex_lock(&aspm_lock);
1301
1302         link->clkpm_disable = !state_enable;
1303         pcie_set_clkpm(link, policy_to_clkpm_state(link));
1304
1305         mutex_unlock(&aspm_lock);
1306         up_read(&pci_bus_sem);
1307
1308         return len;
1309 }
1310
1311 static DEVICE_ATTR_RW(clkpm);
1312 static DEVICE_ATTR_RW(l0s_aspm);
1313 static DEVICE_ATTR_RW(l1_aspm);
1314 static DEVICE_ATTR_RW(l1_1_aspm);
1315 static DEVICE_ATTR_RW(l1_2_aspm);
1316 static DEVICE_ATTR_RW(l1_1_pcipm);
1317 static DEVICE_ATTR_RW(l1_2_pcipm);
1318
1319 static struct attribute *aspm_ctrl_attrs[] = {
1320         &dev_attr_clkpm.attr,
1321         &dev_attr_l0s_aspm.attr,
1322         &dev_attr_l1_aspm.attr,
1323         &dev_attr_l1_1_aspm.attr,
1324         &dev_attr_l1_2_aspm.attr,
1325         &dev_attr_l1_1_pcipm.attr,
1326         &dev_attr_l1_2_pcipm.attr,
1327         NULL
1328 };
1329
1330 static umode_t aspm_ctrl_attrs_are_visible(struct kobject *kobj,
1331                                            struct attribute *a, int n)
1332 {
1333         struct device *dev = kobj_to_dev(kobj);
1334         struct pci_dev *pdev = to_pci_dev(dev);
1335         struct pcie_link_state *link = pcie_aspm_get_link(pdev);
1336         static const u8 aspm_state_map[] = {
1337                 ASPM_STATE_L0S,
1338                 ASPM_STATE_L1,
1339                 ASPM_STATE_L1_1,
1340                 ASPM_STATE_L1_2,
1341                 ASPM_STATE_L1_1_PCIPM,
1342                 ASPM_STATE_L1_2_PCIPM,
1343         };
1344
1345         if (aspm_disabled || !link)
1346                 return 0;
1347
1348         if (n == 0)
1349                 return link->clkpm_capable ? a->mode : 0;
1350
1351         return link->aspm_capable & aspm_state_map[n - 1] ? a->mode : 0;
1352 }
1353
1354 const struct attribute_group aspm_ctrl_attr_group = {
1355         .name = "link",
1356         .attrs = aspm_ctrl_attrs,
1357         .is_visible = aspm_ctrl_attrs_are_visible,
1358 };
1359
1360 static int __init pcie_aspm_disable(char *str)
1361 {
1362         if (!strcmp(str, "off")) {
1363                 aspm_policy = POLICY_DEFAULT;
1364                 aspm_disabled = 1;
1365                 aspm_support_enabled = false;
1366                 printk(KERN_INFO "PCIe ASPM is disabled\n");
1367         } else if (!strcmp(str, "force")) {
1368                 aspm_force = 1;
1369                 printk(KERN_INFO "PCIe ASPM is forcibly enabled\n");
1370         }
1371         return 1;
1372 }
1373
1374 __setup("pcie_aspm=", pcie_aspm_disable);
1375
1376 void pcie_no_aspm(void)
1377 {
1378         /*
1379          * Disabling ASPM is intended to prevent the kernel from modifying
1380          * existing hardware state, not to clear existing state. To that end:
1381          * (a) set policy to POLICY_DEFAULT in order to avoid changing state
1382          * (b) prevent userspace from changing policy
1383          */
1384         if (!aspm_force) {
1385                 aspm_policy = POLICY_DEFAULT;
1386                 aspm_disabled = 1;
1387         }
1388 }
1389
1390 bool pcie_aspm_support_enabled(void)
1391 {
1392         return aspm_support_enabled;
1393 }
1394 EXPORT_SYMBOL(pcie_aspm_support_enabled);