]> asedeno.scripts.mit.edu Git - linux.git/blob - drivers/platform/x86/intel_int0002_vgpio.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
[linux.git] / drivers / platform / x86 / intel_int0002_vgpio.c
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Intel INT0002 "Virtual GPIO" driver
4  *
5  * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com>
6  *
7  * Loosely based on android x86 kernel code which is:
8  *
9  * Copyright (c) 2014, Intel Corporation.
10  *
11  * Author: Dyut Kumar Sil <dyut.k.sil@intel.com>
12  *
13  * Some peripherals on Bay Trail and Cherry Trail platforms signal a Power
14  * Management Event (PME) to the Power Management Controller (PMC) to wakeup
15  * the system. When this happens software needs to clear the PME bus 0 status
16  * bit in the GPE0a_STS register to avoid an IRQ storm on IRQ 9.
17  *
18  * This is modelled in ACPI through the INT0002 ACPI device, which is
19  * called a "Virtual GPIO controller" in ACPI because it defines the event
20  * handler to call when the PME triggers through _AEI and _L02 / _E02
21  * methods as would be done for a real GPIO interrupt in ACPI. Note this
22  * is a hack to define an AML event handler for the PME while using existing
23  * ACPI mechanisms, this is not a real GPIO at all.
24  *
25  * This driver will bind to the INT0002 device, and register as a GPIO
26  * controller, letting gpiolib-acpi.c call the _L02 handler as it would
27  * for a real GPIO controller.
28  */
29
30 #include <linux/acpi.h>
31 #include <linux/bitmap.h>
32 #include <linux/gpio/driver.h>
33 #include <linux/interrupt.h>
34 #include <linux/io.h>
35 #include <linux/kernel.h>
36 #include <linux/module.h>
37 #include <linux/platform_device.h>
38 #include <linux/slab.h>
39 #include <linux/suspend.h>
40
41 #include <asm/cpu_device_id.h>
42 #include <asm/intel-family.h>
43
44 #define DRV_NAME                        "INT0002 Virtual GPIO"
45
46 /* For some reason the virtual GPIO pin tied to the GPE is numbered pin 2 */
47 #define GPE0A_PME_B0_VIRT_GPIO_PIN      2
48
49 #define GPE0A_PME_B0_STS_BIT            BIT(13)
50 #define GPE0A_PME_B0_EN_BIT             BIT(13)
51 #define GPE0A_STS_PORT                  0x420
52 #define GPE0A_EN_PORT                   0x428
53
54 /*
55  * As this is not a real GPIO at all, but just a hack to model an event in
56  * ACPI the get / set functions are dummy functions.
57  */
58
59 static int int0002_gpio_get(struct gpio_chip *chip, unsigned int offset)
60 {
61         return 0;
62 }
63
64 static void int0002_gpio_set(struct gpio_chip *chip, unsigned int offset,
65                              int value)
66 {
67 }
68
69 static int int0002_gpio_direction_output(struct gpio_chip *chip,
70                                          unsigned int offset, int value)
71 {
72         return 0;
73 }
74
75 static void int0002_irq_ack(struct irq_data *data)
76 {
77         outl(GPE0A_PME_B0_STS_BIT, GPE0A_STS_PORT);
78 }
79
80 static void int0002_irq_unmask(struct irq_data *data)
81 {
82         u32 gpe_en_reg;
83
84         gpe_en_reg = inl(GPE0A_EN_PORT);
85         gpe_en_reg |= GPE0A_PME_B0_EN_BIT;
86         outl(gpe_en_reg, GPE0A_EN_PORT);
87 }
88
89 static void int0002_irq_mask(struct irq_data *data)
90 {
91         u32 gpe_en_reg;
92
93         gpe_en_reg = inl(GPE0A_EN_PORT);
94         gpe_en_reg &= ~GPE0A_PME_B0_EN_BIT;
95         outl(gpe_en_reg, GPE0A_EN_PORT);
96 }
97
98 static int int0002_irq_set_wake(struct irq_data *data, unsigned int on)
99 {
100         struct gpio_chip *chip = irq_data_get_irq_chip_data(data);
101         struct platform_device *pdev = to_platform_device(chip->parent);
102         int irq = platform_get_irq(pdev, 0);
103
104         /* Propagate to parent irq */
105         if (on)
106                 enable_irq_wake(irq);
107         else
108                 disable_irq_wake(irq);
109
110         return 0;
111 }
112
113 static irqreturn_t int0002_irq(int irq, void *data)
114 {
115         struct gpio_chip *chip = data;
116         u32 gpe_sts_reg;
117
118         gpe_sts_reg = inl(GPE0A_STS_PORT);
119         if (!(gpe_sts_reg & GPE0A_PME_B0_STS_BIT))
120                 return IRQ_NONE;
121
122         generic_handle_irq(irq_find_mapping(chip->irq.domain,
123                                             GPE0A_PME_B0_VIRT_GPIO_PIN));
124
125         pm_wakeup_hard_event(chip->parent);
126
127         return IRQ_HANDLED;
128 }
129
130 static struct irq_chip int0002_byt_irqchip = {
131         .name                   = DRV_NAME,
132         .irq_ack                = int0002_irq_ack,
133         .irq_mask               = int0002_irq_mask,
134         .irq_unmask             = int0002_irq_unmask,
135         .irq_set_wake           = int0002_irq_set_wake,
136 };
137
138 static struct irq_chip int0002_cht_irqchip = {
139         .name                   = DRV_NAME,
140         .irq_ack                = int0002_irq_ack,
141         .irq_mask               = int0002_irq_mask,
142         .irq_unmask             = int0002_irq_unmask,
143         /*
144          * No set_wake, on CHT the IRQ is typically shared with the ACPI SCI
145          * and we don't want to mess with the ACPI SCI irq settings.
146          */
147         .flags                  = IRQCHIP_SKIP_SET_WAKE,
148 };
149
150 static const struct x86_cpu_id int0002_cpu_ids[] = {
151         INTEL_CPU_FAM6(ATOM_SILVERMONT, int0002_byt_irqchip),   /* Valleyview, Bay Trail  */
152         INTEL_CPU_FAM6(ATOM_AIRMONT, int0002_cht_irqchip),      /* Braswell, Cherry Trail */
153         {}
154 };
155
156 static void int0002_init_irq_valid_mask(struct gpio_chip *chip,
157                                         unsigned long *valid_mask,
158                                         unsigned int ngpios)
159 {
160         bitmap_clear(valid_mask, 0, GPE0A_PME_B0_VIRT_GPIO_PIN);
161 }
162
163 static int int0002_probe(struct platform_device *pdev)
164 {
165         struct device *dev = &pdev->dev;
166         const struct x86_cpu_id *cpu_id;
167         struct gpio_chip *chip;
168         struct gpio_irq_chip *girq;
169         int irq, ret;
170
171         /* Menlow has a different INT0002 device? <sigh> */
172         cpu_id = x86_match_cpu(int0002_cpu_ids);
173         if (!cpu_id)
174                 return -ENODEV;
175
176         irq = platform_get_irq(pdev, 0);
177         if (irq < 0)
178                 return irq;
179
180         chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
181         if (!chip)
182                 return -ENOMEM;
183
184         chip->label = DRV_NAME;
185         chip->parent = dev;
186         chip->owner = THIS_MODULE;
187         chip->get = int0002_gpio_get;
188         chip->set = int0002_gpio_set;
189         chip->direction_input = int0002_gpio_get;
190         chip->direction_output = int0002_gpio_direction_output;
191         chip->base = -1;
192         chip->ngpio = GPE0A_PME_B0_VIRT_GPIO_PIN + 1;
193         chip->irq.init_valid_mask = int0002_init_irq_valid_mask;
194
195         /*
196          * We directly request the irq here instead of passing a flow-handler
197          * to gpiochip_set_chained_irqchip, because the irq is shared.
198          * FIXME: augment this if we managed to pull handling of shared
199          * IRQs into gpiolib.
200          */
201         ret = devm_request_irq(dev, irq, int0002_irq,
202                                IRQF_SHARED, "INT0002", chip);
203         if (ret) {
204                 dev_err(dev, "Error requesting IRQ %d: %d\n", irq, ret);
205                 return ret;
206         }
207
208         girq = &chip->irq;
209         girq->chip = (struct irq_chip *)cpu_id->driver_data;
210         /* This let us handle the parent IRQ in the driver */
211         girq->parent_handler = NULL;
212         girq->num_parents = 0;
213         girq->parents = NULL;
214         girq->default_type = IRQ_TYPE_NONE;
215         girq->handler = handle_edge_irq;
216
217         ret = devm_gpiochip_add_data(dev, chip, NULL);
218         if (ret) {
219                 dev_err(dev, "Error adding gpio chip: %d\n", ret);
220                 return ret;
221         }
222
223         device_init_wakeup(dev, true);
224         return 0;
225 }
226
227 static int int0002_remove(struct platform_device *pdev)
228 {
229         device_init_wakeup(&pdev->dev, false);
230         return 0;
231 }
232
233 static const struct acpi_device_id int0002_acpi_ids[] = {
234         { "INT0002", 0 },
235         { },
236 };
237 MODULE_DEVICE_TABLE(acpi, int0002_acpi_ids);
238
239 static struct platform_driver int0002_driver = {
240         .driver = {
241                 .name                   = DRV_NAME,
242                 .acpi_match_table       = int0002_acpi_ids,
243         },
244         .probe  = int0002_probe,
245         .remove = int0002_remove,
246 };
247
248 module_platform_driver(int0002_driver);
249
250 MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
251 MODULE_DESCRIPTION("Intel INT0002 Virtual GPIO driver");
252 MODULE_LICENSE("GPL v2");