Merge tag 'for-linus-5.6-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubca...

[linux.git] / drivers / scsi / lpfc / lpfc_debugfs.c

/*******************************************************************
 * This file is part of the Emulex Linux Device Driver for         *
 * Fibre Channel Host Bus Adapters.                                *
 * Copyright (C) 2017-2019 Broadcom. All Rights Reserved. The term *
 * “Broadcom” refers to Broadcom Inc. and/or its subsidiaries.  *
 * Copyright (C) 2007-2015 Emulex.  All rights reserved.           *
 * EMULEX and SLI are trademarks of Emulex.                        *
 * www.broadcom.com                                                *
 *                                                                 *
 * This program is free software; you can redistribute it and/or   *
 * modify it under the terms of version 2 of the GNU General       *
 * Public License as published by the Free Software Foundation.    *
 * This program is distributed in the hope that it will be useful. *
 * ALL EXPRESS OR IMPLIED CONDITIONS, REPRESENTATIONS AND          *
 * WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY,  *
 * FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT, ARE      *
 * DISCLAIMED, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMERS ARE HELD *
 * TO BE LEGALLY INVALID.  See the GNU General Public License for  *
 * more details, a copy of which can be found in the file COPYING  *
 * included with this package.                                     *
 *******************************************************************/

#include <linux/blkdev.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#include <linux/interrupt.h>
#include <linux/kthread.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <linux/ctype.h>
#include <linux/vmalloc.h>

#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_transport_fc.h>
#include <scsi/fc/fc_fs.h>

#include <linux/nvme-fc-driver.h>

#include "lpfc_hw4.h"
#include "lpfc_hw.h"
#include "lpfc_sli.h"
#include "lpfc_sli4.h"
#include "lpfc_nl.h"
#include "lpfc_disc.h"
#include "lpfc.h"
#include "lpfc_scsi.h"
#include "lpfc_nvme.h"
#include "lpfc_nvmet.h"
#include "lpfc_logmsg.h"
#include "lpfc_crtn.h"
#include "lpfc_vport.h"
#include "lpfc_version.h"
#include "lpfc_compat.h"
#include "lpfc_debugfs.h"
#include "lpfc_bsg.h"

#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
/*
 * debugfs interface
 *
 * To access this interface the user should:
 * # mount -t debugfs none /sys/kernel/debug
 *
 * The lpfc debugfs directory hierarchy is:
 * /sys/kernel/debug/lpfc/fnX/vportY
 * where X is the lpfc hba function unique_id
 * where Y is the vport VPI on that hba
 *
 * Debugging services available per vport:
 * discovery_trace
 * This is an ACSII readable file that contains a trace of the last
 * lpfc_debugfs_max_disc_trc events that happened on a specific vport.
 * See lpfc_debugfs.h for different categories of  discovery events.
 * To enable the discovery trace, the following module parameters must be set:
 * lpfc_debugfs_enable=1         Turns on lpfc debugfs filesystem support
 * lpfc_debugfs_max_disc_trc=X   Where X is the event trace depth for
 *                               EACH vport. X MUST also be a power of 2.
 * lpfc_debugfs_mask_disc_trc=Y  Where Y is an event mask as defined in
 *                               lpfc_debugfs.h .
 *
 * slow_ring_trace
 * This is an ACSII readable file that contains a trace of the last
 * lpfc_debugfs_max_slow_ring_trc events that happened on a specific HBA.
 * To enable the slow ring trace, the following module parameters must be set:
 * lpfc_debugfs_enable=1         Turns on lpfc debugfs filesystem support
 * lpfc_debugfs_max_slow_ring_trc=X   Where X is the event trace depth for
 *                               the HBA. X MUST also be a power of 2.
 */
static int lpfc_debugfs_enable = 1;
module_param(lpfc_debugfs_enable, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_debugfs_enable, "Enable debugfs services");

/* This MUST be a power of 2 */
static int lpfc_debugfs_max_disc_trc;
module_param(lpfc_debugfs_max_disc_trc, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_debugfs_max_disc_trc,
        "Set debugfs discovery trace depth");

/* This MUST be a power of 2 */
static int lpfc_debugfs_max_slow_ring_trc;
module_param(lpfc_debugfs_max_slow_ring_trc, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc,
        "Set debugfs slow ring trace depth");

/* This MUST be a power of 2 */
static int lpfc_debugfs_max_nvmeio_trc;
module_param(lpfc_debugfs_max_nvmeio_trc, int, 0444);
MODULE_PARM_DESC(lpfc_debugfs_max_nvmeio_trc,
                 "Set debugfs NVME IO trace depth");

static int lpfc_debugfs_mask_disc_trc;
module_param(lpfc_debugfs_mask_disc_trc, int, S_IRUGO);
MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc,
        "Set debugfs discovery trace mask");

#include <linux/debugfs.h>

static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0);
static unsigned long lpfc_debugfs_start_time = 0L;

/* iDiag */
static struct lpfc_idiag idiag;

/**
 * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer
 * @vport: The vport to gather the log info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine gathers the lpfc discovery debugfs data from the @vport and
 * dumps it to @buf up to @size number of bytes. It will start at the next entry
 * in the log and process the log until the end of the buffer. Then it will
 * gather from the beginning of the log and process until the current entry.
 *
 * Notes:
 * Discovery logging will be disabled while while this routine dumps the log.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size)
{
        int i, index, len, enable;
        uint32_t ms;
        struct lpfc_debugfs_trc *dtp;
        char *buffer;

        buffer = kmalloc(LPFC_DEBUG_TRC_ENTRY_SIZE, GFP_KERNEL);
        if (!buffer)
                return 0;

        enable = lpfc_debugfs_enable;
        lpfc_debugfs_enable = 0;

        len = 0;
        index = (atomic_read(&vport->disc_trc_cnt) + 1) &
                (lpfc_debugfs_max_disc_trc - 1);
        for (i = index; i < lpfc_debugfs_max_disc_trc; i++) {
                dtp = vport->disc_trc + i;
                if (!dtp->fmt)
                        continue;
                ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time);
                snprintf(buffer,
                        LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n",
                        dtp->seq_cnt, ms, dtp->fmt);
                len +=  scnprintf(buf+len, size-len, buffer,
                        dtp->data1, dtp->data2, dtp->data3);
        }
        for (i = 0; i < index; i++) {
                dtp = vport->disc_trc + i;
                if (!dtp->fmt)
                        continue;
                ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time);
                snprintf(buffer,
                        LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n",
                        dtp->seq_cnt, ms, dtp->fmt);
                len +=  scnprintf(buf+len, size-len, buffer,
                        dtp->data1, dtp->data2, dtp->data3);
        }

        lpfc_debugfs_enable = enable;
        kfree(buffer);

        return len;
}

/**
 * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer
 * @phba: The HBA to gather the log info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine gathers the lpfc slow ring debugfs data from the @phba and
 * dumps it to @buf up to @size number of bytes. It will start at the next entry
 * in the log and process the log until the end of the buffer. Then it will
 * gather from the beginning of the log and process until the current entry.
 *
 * Notes:
 * Slow ring logging will be disabled while while this routine dumps the log.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size)
{
        int i, index, len, enable;
        uint32_t ms;
        struct lpfc_debugfs_trc *dtp;
        char *buffer;

        buffer = kmalloc(LPFC_DEBUG_TRC_ENTRY_SIZE, GFP_KERNEL);
        if (!buffer)
                return 0;

        enable = lpfc_debugfs_enable;
        lpfc_debugfs_enable = 0;

        len = 0;
        index = (atomic_read(&phba->slow_ring_trc_cnt) + 1) &
                (lpfc_debugfs_max_slow_ring_trc - 1);
        for (i = index; i < lpfc_debugfs_max_slow_ring_trc; i++) {
                dtp = phba->slow_ring_trc + i;
                if (!dtp->fmt)
                        continue;
                ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time);
                snprintf(buffer,
                        LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n",
                        dtp->seq_cnt, ms, dtp->fmt);
                len +=  scnprintf(buf+len, size-len, buffer,
                        dtp->data1, dtp->data2, dtp->data3);
        }
        for (i = 0; i < index; i++) {
                dtp = phba->slow_ring_trc + i;
                if (!dtp->fmt)
                        continue;
                ms = jiffies_to_msecs(dtp->jif - lpfc_debugfs_start_time);
                snprintf(buffer,
                        LPFC_DEBUG_TRC_ENTRY_SIZE, "%010d:%010d ms:%s\n",
                        dtp->seq_cnt, ms, dtp->fmt);
                len +=  scnprintf(buf+len, size-len, buffer,
                        dtp->data1, dtp->data2, dtp->data3);
        }

        lpfc_debugfs_enable = enable;
        kfree(buffer);

        return len;
}

static int lpfc_debugfs_last_hbq = -1;

/**
 * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer
 * @phba: The HBA to gather host buffer info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the host buffer queue info from the @phba to @buf up to
 * @size number of bytes. A header that describes the current hbq state will be
 * dumped to @buf first and then info on each hbq entry will be dumped to @buf
 * until @size bytes have been dumped or all the hbq info has been dumped.
 *
 * Notes:
 * This routine will rotate through each configured HBQ each time called.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size)
{
        int len = 0;
        int i, j, found, posted, low;
        uint32_t phys, raw_index, getidx;
        struct lpfc_hbq_init *hip;
        struct hbq_s *hbqs;
        struct lpfc_hbq_entry *hbqe;
        struct lpfc_dmabuf *d_buf;
        struct hbq_dmabuf *hbq_buf;

        if (phba->sli_rev != 3)
                return 0;

        spin_lock_irq(&phba->hbalock);

        /* toggle between multiple hbqs, if any */
        i = lpfc_sli_hbq_count();
        if (i > 1) {
                 lpfc_debugfs_last_hbq++;
                 if (lpfc_debugfs_last_hbq >= i)
                        lpfc_debugfs_last_hbq = 0;
        }
        else
                lpfc_debugfs_last_hbq = 0;

        i = lpfc_debugfs_last_hbq;

        len +=  scnprintf(buf+len, size-len, "HBQ %d Info\n", i);

        hbqs =  &phba->hbqs[i];
        posted = 0;
        list_for_each_entry(d_buf, &hbqs->hbq_buffer_list, list)
                posted++;

        hip =  lpfc_hbq_defs[i];
        len +=  scnprintf(buf+len, size-len,
                "idx:%d prof:%d rn:%d bufcnt:%d icnt:%d acnt:%d posted %d\n",
                hip->hbq_index, hip->profile, hip->rn,
                hip->buffer_count, hip->init_count, hip->add_count, posted);

        raw_index = phba->hbq_get[i];
        getidx = le32_to_cpu(raw_index);
        len +=  scnprintf(buf+len, size-len,
                "entries:%d bufcnt:%d Put:%d nPut:%d localGet:%d hbaGet:%d\n",
                hbqs->entry_count, hbqs->buffer_count, hbqs->hbqPutIdx,
                hbqs->next_hbqPutIdx, hbqs->local_hbqGetIdx, getidx);

        hbqe = (struct lpfc_hbq_entry *) phba->hbqs[i].hbq_virt;
        for (j=0; j<hbqs->entry_count; j++) {
                len +=  scnprintf(buf+len, size-len,
                        "%03d: %08x %04x %05x ", j,
                        le32_to_cpu(hbqe->bde.addrLow),
                        le32_to_cpu(hbqe->bde.tus.w),
                        le32_to_cpu(hbqe->buffer_tag));
                i = 0;
                found = 0;

                /* First calculate if slot has an associated posted buffer */
                low = hbqs->hbqPutIdx - posted;
                if (low >= 0) {
                        if ((j >= hbqs->hbqPutIdx) || (j < low)) {
                                len +=  scnprintf(buf + len, size - len,
                                                "Unused\n");
                                goto skipit;
                        }
                }
                else {
                        if ((j >= hbqs->hbqPutIdx) &&
                                (j < (hbqs->entry_count+low))) {
                                len +=  scnprintf(buf + len, size - len,
                                                "Unused\n");
                                goto skipit;
                        }
                }

                /* Get the Buffer info for the posted buffer */
                list_for_each_entry(d_buf, &hbqs->hbq_buffer_list, list) {
                        hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf);
                        phys = ((uint64_t)hbq_buf->dbuf.phys & 0xffffffff);
                        if (phys == le32_to_cpu(hbqe->bde.addrLow)) {
                                len +=  scnprintf(buf+len, size-len,
                                        "Buf%d: x%px %06x\n", i,
                                        hbq_buf->dbuf.virt, hbq_buf->tag);
                                found = 1;
                                break;
                        }
                        i++;
                }
                if (!found) {
                        len +=  scnprintf(buf+len, size-len, "No DMAinfo?\n");
                }
skipit:
                hbqe++;
                if (len > LPFC_HBQINFO_SIZE - 54)
                        break;
        }
        spin_unlock_irq(&phba->hbalock);
        return len;
}

static int lpfc_debugfs_last_xripool;

/**
 * lpfc_debugfs_common_xri_data - Dump Hardware Queue info to a buffer
 * @phba: The HBA to gather host buffer info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the Hardware Queue info from the @phba to @buf up to
 * @size number of bytes. A header that describes the current hdwq state will be
 * dumped to @buf first and then info on each hdwq entry will be dumped to @buf
 * until @size bytes have been dumped or all the hdwq info has been dumped.
 *
 * Notes:
 * This routine will rotate through each configured Hardware Queue each
 * time called.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_commonxripools_data(struct lpfc_hba *phba, char *buf, int size)
{
        struct lpfc_sli4_hdw_queue *qp;
        int len = 0;
        int i, out;
        unsigned long iflag;

        for (i = 0; i < phba->cfg_hdw_queue; i++) {
                if (len > (LPFC_DUMP_MULTIXRIPOOL_SIZE - 80))
                        break;
                qp = &phba->sli4_hba.hdwq[lpfc_debugfs_last_xripool];

                len += scnprintf(buf + len, size - len, "HdwQ %d Info ", i);
                spin_lock_irqsave(&qp->abts_io_buf_list_lock, iflag);
                spin_lock(&qp->io_buf_list_get_lock);
                spin_lock(&qp->io_buf_list_put_lock);
                out = qp->total_io_bufs - (qp->get_io_bufs + qp->put_io_bufs +
                        qp->abts_scsi_io_bufs + qp->abts_nvme_io_bufs);
                len += scnprintf(buf + len, size - len,
                                 "tot:%d get:%d put:%d mt:%d "
                                 "ABTS scsi:%d nvme:%d Out:%d\n",
                        qp->total_io_bufs, qp->get_io_bufs, qp->put_io_bufs,
                        qp->empty_io_bufs, qp->abts_scsi_io_bufs,
                        qp->abts_nvme_io_bufs, out);
                spin_unlock(&qp->io_buf_list_put_lock);
                spin_unlock(&qp->io_buf_list_get_lock);
                spin_unlock_irqrestore(&qp->abts_io_buf_list_lock, iflag);

                lpfc_debugfs_last_xripool++;
                if (lpfc_debugfs_last_xripool >= phba->cfg_hdw_queue)
                        lpfc_debugfs_last_xripool = 0;
        }

        return len;
}

/**
 * lpfc_debugfs_multixripools_data - Display multi-XRI pools information
 * @phba: The HBA to gather host buffer info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine displays current multi-XRI pools information including XRI
 * count in public, private and txcmplq. It also displays current high and
 * low watermark.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_multixripools_data(struct lpfc_hba *phba, char *buf, int size)
{
        u32 i;
        u32 hwq_count;
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_multixri_pool *multixri_pool;
        struct lpfc_pvt_pool *pvt_pool;
        struct lpfc_pbl_pool *pbl_pool;
        u32 txcmplq_cnt;
        char tmp[LPFC_DEBUG_OUT_LINE_SZ] = {0};

        if (phba->sli_rev != LPFC_SLI_REV4)
                return 0;

        if (!phba->sli4_hba.hdwq)
                return 0;

        if (!phba->cfg_xri_rebalancing) {
                i = lpfc_debugfs_commonxripools_data(phba, buf, size);
                return i;
        }

        /*
         * Pbl: Current number of free XRIs in public pool
         * Pvt: Current number of free XRIs in private pool
         * Busy: Current number of outstanding XRIs
         * HWM: Current high watermark
         * pvt_empty: Incremented by 1 when IO submission fails (no xri)
         * pbl_empty: Incremented by 1 when all pbl_pool are empty during
         *            IO submission
         */
        scnprintf(tmp, sizeof(tmp),
                  "HWQ:  Pbl  Pvt Busy  HWM |  pvt_empty  pbl_empty ");
        if (strlcat(buf, tmp, size) >= size)
                return strnlen(buf, size);

#ifdef LPFC_MXP_STAT
        /*
         * MAXH: Max high watermark seen so far
         * above_lmt: Incremented by 1 if xri_owned > xri_limit during
         *            IO submission
         * below_lmt: Incremented by 1 if xri_owned <= xri_limit  during
         *            IO submission
         * locPbl_hit: Incremented by 1 if successfully get a batch of XRI from
         *             local pbl_pool
         * othPbl_hit: Incremented by 1 if successfully get a batch of XRI from
         *             other pbl_pool
         */
        scnprintf(tmp, sizeof(tmp),
                  "MAXH  above_lmt  below_lmt locPbl_hit othPbl_hit");
        if (strlcat(buf, tmp, size) >= size)
                return strnlen(buf, size);

        /*
         * sPbl: snapshot of Pbl 15 sec after stat gets cleared
         * sPvt: snapshot of Pvt 15 sec after stat gets cleared
         * sBusy: snapshot of Busy 15 sec after stat gets cleared
         */
        scnprintf(tmp, sizeof(tmp),
                  " | sPbl sPvt sBusy");
        if (strlcat(buf, tmp, size) >= size)
                return strnlen(buf, size);
#endif

        scnprintf(tmp, sizeof(tmp), "\n");
        if (strlcat(buf, tmp, size) >= size)
                return strnlen(buf, size);

        hwq_count = phba->cfg_hdw_queue;
        for (i = 0; i < hwq_count; i++) {
                qp = &phba->sli4_hba.hdwq[i];
                multixri_pool = qp->p_multixri_pool;
                if (!multixri_pool)
                        continue;
                pbl_pool = &multixri_pool->pbl_pool;
                pvt_pool = &multixri_pool->pvt_pool;
                txcmplq_cnt = qp->io_wq->pring->txcmplq_cnt;

                scnprintf(tmp, sizeof(tmp),
                          "%03d: %4d %4d %4d %4d | %10d %10d ",
                          i, pbl_pool->count, pvt_pool->count,
                          txcmplq_cnt, pvt_pool->high_watermark,
                          qp->empty_io_bufs, multixri_pool->pbl_empty_count);
                if (strlcat(buf, tmp, size) >= size)
                        break;

#ifdef LPFC_MXP_STAT
                scnprintf(tmp, sizeof(tmp),
                          "%4d %10d %10d %10d %10d",
                          multixri_pool->stat_max_hwm,
                          multixri_pool->above_limit_count,
                          multixri_pool->below_limit_count,
                          multixri_pool->local_pbl_hit_count,
                          multixri_pool->other_pbl_hit_count);
                if (strlcat(buf, tmp, size) >= size)
                        break;

                scnprintf(tmp, sizeof(tmp),
                          " | %4d %4d %5d",
                          multixri_pool->stat_pbl_count,
                          multixri_pool->stat_pvt_count,
                          multixri_pool->stat_busy_count);
                if (strlcat(buf, tmp, size) >= size)
                        break;
#endif

                scnprintf(tmp, sizeof(tmp), "\n");
                if (strlcat(buf, tmp, size) >= size)
                        break;
        }
        return strnlen(buf, size);
}


#ifdef LPFC_HDWQ_LOCK_STAT
static int lpfc_debugfs_last_lock;

/**
 * lpfc_debugfs_lockstat_data - Dump Hardware Queue info to a buffer
 * @phba: The HBA to gather host buffer info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the Hardware Queue info from the @phba to @buf up to
 * @size number of bytes. A header that describes the current hdwq state will be
 * dumped to @buf first and then info on each hdwq entry will be dumped to @buf
 * until @size bytes have been dumped or all the hdwq info has been dumped.
 *
 * Notes:
 * This routine will rotate through each configured Hardware Queue each
 * time called.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_lockstat_data(struct lpfc_hba *phba, char *buf, int size)
{
        struct lpfc_sli4_hdw_queue *qp;
        int len = 0;
        int i;

        if (phba->sli_rev != LPFC_SLI_REV4)
                return 0;

        if (!phba->sli4_hba.hdwq)
                return 0;

        for (i = 0; i < phba->cfg_hdw_queue; i++) {
                if (len > (LPFC_HDWQINFO_SIZE - 100))
                        break;
                qp = &phba->sli4_hba.hdwq[lpfc_debugfs_last_lock];

                len += scnprintf(buf + len, size - len, "HdwQ %03d Lock ", i);
                if (phba->cfg_xri_rebalancing) {
                        len += scnprintf(buf + len, size - len,
                                         "get_pvt:%d mv_pvt:%d "
                                         "mv2pub:%d mv2pvt:%d "
                                         "put_pvt:%d put_pub:%d wq:%d\n",
                                         qp->lock_conflict.alloc_pvt_pool,
                                         qp->lock_conflict.mv_from_pvt_pool,
                                         qp->lock_conflict.mv_to_pub_pool,
                                         qp->lock_conflict.mv_to_pvt_pool,
                                         qp->lock_conflict.free_pvt_pool,
                                         qp->lock_conflict.free_pub_pool,
                                         qp->lock_conflict.wq_access);
                } else {
                        len += scnprintf(buf + len, size - len,
                                         "get:%d put:%d free:%d wq:%d\n",
                                         qp->lock_conflict.alloc_xri_get,
                                         qp->lock_conflict.alloc_xri_put,
                                         qp->lock_conflict.free_xri,
                                         qp->lock_conflict.wq_access);
                }

                lpfc_debugfs_last_lock++;
                if (lpfc_debugfs_last_lock >= phba->cfg_hdw_queue)
                        lpfc_debugfs_last_lock = 0;
        }

        return len;
}
#endif

static int lpfc_debugfs_last_hba_slim_off;

/**
 * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer
 * @phba: The HBA to gather SLIM info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the current contents of HBA SLIM for the HBA associated
 * with @phba to @buf up to @size bytes of data. This is the raw HBA SLIM data.
 *
 * Notes:
 * This routine will only dump up to 1024 bytes of data each time called and
 * should be called multiple times to dump the entire HBA SLIM.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size)
{
        int len = 0;
        int i, off;
        uint32_t *ptr;
        char *buffer;

        buffer = kmalloc(1024, GFP_KERNEL);
        if (!buffer)
                return 0;

        off = 0;
        spin_lock_irq(&phba->hbalock);

        len +=  scnprintf(buf+len, size-len, "HBA SLIM\n");
        lpfc_memcpy_from_slim(buffer,
                phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024);

        ptr = (uint32_t *)&buffer[0];
        off = lpfc_debugfs_last_hba_slim_off;

        /* Set it up for the next time */
        lpfc_debugfs_last_hba_slim_off += 1024;
        if (lpfc_debugfs_last_hba_slim_off >= 4096)
                lpfc_debugfs_last_hba_slim_off = 0;

        i = 1024;
        while (i > 0) {
                len +=  scnprintf(buf+len, size-len,
                "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
                off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4),
                *(ptr+5), *(ptr+6), *(ptr+7));
                ptr += 8;
                i -= (8 * sizeof(uint32_t));
                off += (8 * sizeof(uint32_t));
        }

        spin_unlock_irq(&phba->hbalock);
        kfree(buffer);

        return len;
}

/**
 * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer
 * @phba: The HBA to gather Host SLIM info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the current contents of host SLIM for the host associated
 * with @phba to @buf up to @size bytes of data. The dump will contain the
 * Mailbox, PCB, Rings, and Registers that are located in host memory.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
{
        int len = 0;
        int i, off;
        uint32_t word0, word1, word2, word3;
        uint32_t *ptr;
        struct lpfc_pgp *pgpp;
        struct lpfc_sli *psli = &phba->sli;
        struct lpfc_sli_ring *pring;

        off = 0;
        spin_lock_irq(&phba->hbalock);

        len +=  scnprintf(buf+len, size-len, "SLIM Mailbox\n");
        ptr = (uint32_t *)phba->slim2p.virt;
        i = sizeof(MAILBOX_t);
        while (i > 0) {
                len +=  scnprintf(buf+len, size-len,
                "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
                off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4),
                *(ptr+5), *(ptr+6), *(ptr+7));
                ptr += 8;
                i -= (8 * sizeof(uint32_t));
                off += (8 * sizeof(uint32_t));
        }

        len +=  scnprintf(buf+len, size-len, "SLIM PCB\n");
        ptr = (uint32_t *)phba->pcb;
        i = sizeof(PCB_t);
        while (i > 0) {
                len +=  scnprintf(buf+len, size-len,
                "%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
                off, *ptr, *(ptr+1), *(ptr+2), *(ptr+3), *(ptr+4),
                *(ptr+5), *(ptr+6), *(ptr+7));
                ptr += 8;
                i -= (8 * sizeof(uint32_t));
                off += (8 * sizeof(uint32_t));
        }

        if (phba->sli_rev <= LPFC_SLI_REV3) {
                for (i = 0; i < 4; i++) {
                        pgpp = &phba->port_gp[i];
                        pring = &psli->sli3_ring[i];
                        len +=  scnprintf(buf+len, size-len,
                                         "Ring %d: CMD GetInx:%d "
                                         "(Max:%d Next:%d "
                                         "Local:%d flg:x%x)  "
                                         "RSP PutInx:%d Max:%d\n",
                                         i, pgpp->cmdGetInx,
                                         pring->sli.sli3.numCiocb,
                                         pring->sli.sli3.next_cmdidx,
                                         pring->sli.sli3.local_getidx,
                                         pring->flag, pgpp->rspPutInx,
                                         pring->sli.sli3.numRiocb);
                }

                word0 = readl(phba->HAregaddr);
                word1 = readl(phba->CAregaddr);
                word2 = readl(phba->HSregaddr);
                word3 = readl(phba->HCregaddr);
                len +=  scnprintf(buf+len, size-len, "HA:%08x CA:%08x HS:%08x "
                                 "HC:%08x\n", word0, word1, word2, word3);
        }
        spin_unlock_irq(&phba->hbalock);
        return len;
}

/**
 * lpfc_debugfs_nodelist_data - Dump target node list to a buffer
 * @vport: The vport to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the current target node list associated with @vport to
 * @buf up to @size bytes of data. Each node entry in the dump will contain a
 * node state, DID, WWPN, WWNN, RPI, flags, type, and other useful fields.
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size)
{
        int len = 0;
        int i, iocnt, outio, cnt;
        struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
        struct lpfc_hba  *phba = vport->phba;
        struct lpfc_nodelist *ndlp;
        unsigned char *statep;
        struct nvme_fc_local_port *localport;
        struct nvme_fc_remote_port *nrport = NULL;
        struct lpfc_nvme_rport *rport;

        cnt = (LPFC_NODELIST_SIZE / LPFC_NODELIST_ENTRY_SIZE);
        outio = 0;

        len += scnprintf(buf+len, size-len, "\nFCP Nodelist Entries ...\n");
        spin_lock_irq(shost->host_lock);
        list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
                iocnt = 0;
                if (!cnt) {
                        len +=  scnprintf(buf+len, size-len,
                                "Missing Nodelist Entries\n");
                        break;
                }
                cnt--;
                switch (ndlp->nlp_state) {
                case NLP_STE_UNUSED_NODE:
                        statep = "UNUSED";
                        break;
                case NLP_STE_PLOGI_ISSUE:
                        statep = "PLOGI ";
                        break;
                case NLP_STE_ADISC_ISSUE:
                        statep = "ADISC ";
                        break;
                case NLP_STE_REG_LOGIN_ISSUE:
                        statep = "REGLOG";
                        break;
                case NLP_STE_PRLI_ISSUE:
                        statep = "PRLI  ";
                        break;
                case NLP_STE_LOGO_ISSUE:
                        statep = "LOGO  ";
                        break;
                case NLP_STE_UNMAPPED_NODE:
                        statep = "UNMAP ";
                        iocnt = 1;
                        break;
                case NLP_STE_MAPPED_NODE:
                        statep = "MAPPED";
                        iocnt = 1;
                        break;
                case NLP_STE_NPR_NODE:
                        statep = "NPR   ";
                        break;
                default:
                        statep = "UNKNOWN";
                }
                len += scnprintf(buf+len, size-len, "%s DID:x%06x ",
                                statep, ndlp->nlp_DID);
                len += scnprintf(buf+len, size-len,
                                "WWPN x%llx ",
                                wwn_to_u64(ndlp->nlp_portname.u.wwn));
                len += scnprintf(buf+len, size-len,
                                "WWNN x%llx ",
                                wwn_to_u64(ndlp->nlp_nodename.u.wwn));
                if (ndlp->nlp_flag & NLP_RPI_REGISTERED)
                        len += scnprintf(buf+len, size-len, "RPI:%03d ",
                                        ndlp->nlp_rpi);
                else
                        len += scnprintf(buf+len, size-len, "RPI:none ");
                len +=  scnprintf(buf+len, size-len, "flag:x%08x ",
                        ndlp->nlp_flag);
                if (!ndlp->nlp_type)
                        len += scnprintf(buf+len, size-len, "UNKNOWN_TYPE ");
                if (ndlp->nlp_type & NLP_FC_NODE)
                        len += scnprintf(buf+len, size-len, "FC_NODE ");
                if (ndlp->nlp_type & NLP_FABRIC) {
                        len += scnprintf(buf+len, size-len, "FABRIC ");
                        iocnt = 0;
                }
                if (ndlp->nlp_type & NLP_FCP_TARGET)
                        len += scnprintf(buf+len, size-len, "FCP_TGT sid:%d ",
                                ndlp->nlp_sid);
                if (ndlp->nlp_type & NLP_FCP_INITIATOR)
                        len += scnprintf(buf+len, size-len, "FCP_INITIATOR ");
                if (ndlp->nlp_type & NLP_NVME_TARGET)
                        len += scnprintf(buf + len,
                                        size - len, "NVME_TGT sid:%d ",
                                        NLP_NO_SID);
                if (ndlp->nlp_type & NLP_NVME_INITIATOR)
                        len += scnprintf(buf + len,
                                        size - len, "NVME_INITIATOR ");
                len += scnprintf(buf+len, size-len, "usgmap:%x ",
                        ndlp->nlp_usg_map);
                len += scnprintf(buf+len, size-len, "refcnt:%x",
                        kref_read(&ndlp->kref));
                if (iocnt) {
                        i = atomic_read(&ndlp->cmd_pending);
                        len += scnprintf(buf + len, size - len,
                                        " OutIO:x%x Qdepth x%x",
                                        i, ndlp->cmd_qdepth);
                        outio += i;
                }
                len += scnprintf(buf + len, size - len, "defer:%x ",
                        ndlp->nlp_defer_did);
                len +=  scnprintf(buf+len, size-len, "\n");
        }
        spin_unlock_irq(shost->host_lock);

        len += scnprintf(buf + len, size - len,
                        "\nOutstanding IO x%x\n",  outio);

        if (phba->nvmet_support && phba->targetport && (vport == phba->pport)) {
                len += scnprintf(buf + len, size - len,
                                "\nNVME Targetport Entry ...\n");

                /* Port state is only one of two values for now. */
                if (phba->targetport->port_id)
                        statep = "REGISTERED";
                else
                        statep = "INIT";
                len += scnprintf(buf + len, size - len,
                                "TGT WWNN x%llx WWPN x%llx State %s\n",
                                wwn_to_u64(vport->fc_nodename.u.wwn),
                                wwn_to_u64(vport->fc_portname.u.wwn),
                                statep);
                len += scnprintf(buf + len, size - len,
                                "    Targetport DID x%06x\n",
                                phba->targetport->port_id);
                goto out_exit;
        }

        len += scnprintf(buf + len, size - len,
                                "\nNVME Lport/Rport Entries ...\n");

        localport = vport->localport;
        if (!localport)
                goto out_exit;

        spin_lock_irq(shost->host_lock);

        /* Port state is only one of two values for now. */
        if (localport->port_id)
                statep = "ONLINE";
        else
                statep = "UNKNOWN ";

        len += scnprintf(buf + len, size - len,
                        "Lport DID x%06x PortState %s\n",
                        localport->port_id, statep);

        len += scnprintf(buf + len, size - len, "\tRport List:\n");
        list_for_each_entry(ndlp, &vport->fc_nodes, nlp_listp) {
                /* local short-hand pointer. */
                spin_lock(&phba->hbalock);
                rport = lpfc_ndlp_get_nrport(ndlp);
                if (rport)
                        nrport = rport->remoteport;
                else
                        nrport = NULL;
                spin_unlock(&phba->hbalock);
                if (!nrport)
                        continue;

                /* Port state is only one of two values for now. */
                switch (nrport->port_state) {
                case FC_OBJSTATE_ONLINE:
                        statep = "ONLINE";
                        break;
                case FC_OBJSTATE_UNKNOWN:
                        statep = "UNKNOWN ";
                        break;
                default:
                        statep = "UNSUPPORTED";
                        break;
                }

                /* Tab in to show lport ownership. */
                len += scnprintf(buf + len, size - len,
                                "\t%s Port ID:x%06x ",
                                statep, nrport->port_id);
                len += scnprintf(buf + len, size - len, "WWPN x%llx ",
                                nrport->port_name);
                len += scnprintf(buf + len, size - len, "WWNN x%llx ",
                                nrport->node_name);

                /* An NVME rport can have multiple roles. */
                if (nrport->port_role & FC_PORT_ROLE_NVME_INITIATOR)
                        len +=  scnprintf(buf + len, size - len,
                                         "INITIATOR ");
                if (nrport->port_role & FC_PORT_ROLE_NVME_TARGET)
                        len +=  scnprintf(buf + len, size - len,
                                         "TARGET ");
                if (nrport->port_role & FC_PORT_ROLE_NVME_DISCOVERY)
                        len +=  scnprintf(buf + len, size - len,
                                         "DISCSRVC ");
                if (nrport->port_role & ~(FC_PORT_ROLE_NVME_INITIATOR |
                                          FC_PORT_ROLE_NVME_TARGET |
                                          FC_PORT_ROLE_NVME_DISCOVERY))
                        len +=  scnprintf(buf + len, size - len,
                                         "UNKNOWN ROLE x%x",
                                         nrport->port_role);
                /* Terminate the string. */
                len +=  scnprintf(buf + len, size - len, "\n");
        }

        spin_unlock_irq(shost->host_lock);
 out_exit:
        return len;
}

/**
 * lpfc_debugfs_nvmestat_data - Dump target node list to a buffer
 * @vport: The vport to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the NVME statistics associated with @vport
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)
{
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_nvmet_tgtport *tgtp;
        struct lpfc_nvmet_rcv_ctx *ctxp, *next_ctxp;
        struct nvme_fc_local_port *localport;
        struct lpfc_fc4_ctrl_stat *cstat;
        struct lpfc_nvme_lport *lport;
        uint64_t data1, data2, data3;
        uint64_t tot, totin, totout;
        int cnt, i;
        int len = 0;

        if (phba->nvmet_support) {
                if (!phba->targetport)
                        return len;
                tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
                len += scnprintf(buf + len, size - len,
                                "\nNVME Targetport Statistics\n");

                len += scnprintf(buf + len, size - len,
                                "LS: Rcv %08x Drop %08x Abort %08x\n",
                                atomic_read(&tgtp->rcv_ls_req_in),
                                atomic_read(&tgtp->rcv_ls_req_drop),
                                atomic_read(&tgtp->xmt_ls_abort));
                if (atomic_read(&tgtp->rcv_ls_req_in) !=
                    atomic_read(&tgtp->rcv_ls_req_out)) {
                        len += scnprintf(buf + len, size - len,
                                        "Rcv LS: in %08x != out %08x\n",
                                        atomic_read(&tgtp->rcv_ls_req_in),
                                        atomic_read(&tgtp->rcv_ls_req_out));
                }

                len += scnprintf(buf + len, size - len,
                                "LS: Xmt %08x Drop %08x Cmpl %08x\n",
                                atomic_read(&tgtp->xmt_ls_rsp),
                                atomic_read(&tgtp->xmt_ls_drop),
                                atomic_read(&tgtp->xmt_ls_rsp_cmpl));

                len += scnprintf(buf + len, size - len,
                                "LS: RSP Abort %08x xb %08x Err %08x\n",
                                atomic_read(&tgtp->xmt_ls_rsp_aborted),
                                atomic_read(&tgtp->xmt_ls_rsp_xb_set),
                                atomic_read(&tgtp->xmt_ls_rsp_error));

                len += scnprintf(buf + len, size - len,
                                "FCP: Rcv %08x Defer %08x Release %08x "
                                "Drop %08x\n",
                                atomic_read(&tgtp->rcv_fcp_cmd_in),
                                atomic_read(&tgtp->rcv_fcp_cmd_defer),
                                atomic_read(&tgtp->xmt_fcp_release),
                                atomic_read(&tgtp->rcv_fcp_cmd_drop));

                if (atomic_read(&tgtp->rcv_fcp_cmd_in) !=
                    atomic_read(&tgtp->rcv_fcp_cmd_out)) {
                        len += scnprintf(buf + len, size - len,
                                        "Rcv FCP: in %08x != out %08x\n",
                                        atomic_read(&tgtp->rcv_fcp_cmd_in),
                                        atomic_read(&tgtp->rcv_fcp_cmd_out));
                }

                len += scnprintf(buf + len, size - len,
                                "FCP Rsp: read %08x readrsp %08x "
                                "write %08x rsp %08x\n",
                                atomic_read(&tgtp->xmt_fcp_read),
                                atomic_read(&tgtp->xmt_fcp_read_rsp),
                                atomic_read(&tgtp->xmt_fcp_write),
                                atomic_read(&tgtp->xmt_fcp_rsp));

                len += scnprintf(buf + len, size - len,
                                "FCP Rsp Cmpl: %08x err %08x drop %08x\n",
                                atomic_read(&tgtp->xmt_fcp_rsp_cmpl),
                                atomic_read(&tgtp->xmt_fcp_rsp_error),
                                atomic_read(&tgtp->xmt_fcp_rsp_drop));

                len += scnprintf(buf + len, size - len,
                                "FCP Rsp Abort: %08x xb %08x xricqe  %08x\n",
                                atomic_read(&tgtp->xmt_fcp_rsp_aborted),
                                atomic_read(&tgtp->xmt_fcp_rsp_xb_set),
                                atomic_read(&tgtp->xmt_fcp_xri_abort_cqe));

                len += scnprintf(buf + len, size - len,
                                "ABORT: Xmt %08x Cmpl %08x\n",
                                atomic_read(&tgtp->xmt_fcp_abort),
                                atomic_read(&tgtp->xmt_fcp_abort_cmpl));

                len += scnprintf(buf + len, size - len,
                                "ABORT: Sol %08x  Usol %08x Err %08x Cmpl %08x",
                                atomic_read(&tgtp->xmt_abort_sol),
                                atomic_read(&tgtp->xmt_abort_unsol),
                                atomic_read(&tgtp->xmt_abort_rsp),
                                atomic_read(&tgtp->xmt_abort_rsp_error));

                len +=  scnprintf(buf + len, size - len, "\n");

                cnt = 0;
                spin_lock(&phba->sli4_hba.abts_nvmet_buf_list_lock);
                list_for_each_entry_safe(ctxp, next_ctxp,
                                &phba->sli4_hba.lpfc_abts_nvmet_ctx_list,
                                list) {
                        cnt++;
                }
                spin_unlock(&phba->sli4_hba.abts_nvmet_buf_list_lock);
                if (cnt) {
                        len += scnprintf(buf + len, size - len,
                                        "ABORT: %d ctx entries\n", cnt);
                        spin_lock(&phba->sli4_hba.abts_nvmet_buf_list_lock);
                        list_for_each_entry_safe(ctxp, next_ctxp,
                                    &phba->sli4_hba.lpfc_abts_nvmet_ctx_list,
                                    list) {
                                if (len >= (size - LPFC_DEBUG_OUT_LINE_SZ))
                                        break;
                                len += scnprintf(buf + len, size - len,
                                                "Entry: oxid %x state %x "
                                                "flag %x\n",
                                                ctxp->oxid, ctxp->state,
                                                ctxp->flag);
                        }
                        spin_unlock(&phba->sli4_hba.abts_nvmet_buf_list_lock);
                }

                /* Calculate outstanding IOs */
                tot = atomic_read(&tgtp->rcv_fcp_cmd_drop);
                tot += atomic_read(&tgtp->xmt_fcp_release);
                tot = atomic_read(&tgtp->rcv_fcp_cmd_in) - tot;

                len += scnprintf(buf + len, size - len,
                                "IO_CTX: %08x  WAIT: cur %08x tot %08x\n"
                                "CTX Outstanding %08llx\n",
                                phba->sli4_hba.nvmet_xri_cnt,
                                phba->sli4_hba.nvmet_io_wait_cnt,
                                phba->sli4_hba.nvmet_io_wait_total,
                                tot);
        } else {
                if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_NVME))
                        return len;

                localport = vport->localport;
                if (!localport)
                        return len;
                lport = (struct lpfc_nvme_lport *)localport->private;
                if (!lport)
                        return len;

                len += scnprintf(buf + len, size - len,
                                "\nNVME HDWQ Statistics\n");

                len += scnprintf(buf + len, size - len,
                                "LS: Xmt %016x Cmpl %016x\n",
                                atomic_read(&lport->fc4NvmeLsRequests),
                                atomic_read(&lport->fc4NvmeLsCmpls));

                totin = 0;
                totout = 0;
                for (i = 0; i < phba->cfg_hdw_queue; i++) {
                        cstat = &phba->sli4_hba.hdwq[i].nvme_cstat;
                        tot = cstat->io_cmpls;
                        totin += tot;
                        data1 = cstat->input_requests;
                        data2 = cstat->output_requests;
                        data3 = cstat->control_requests;
                        totout += (data1 + data2 + data3);

                        /* Limit to 32, debugfs display buffer limitation */
                        if (i >= 32)
                                continue;

                        len += scnprintf(buf + len, PAGE_SIZE - len,
                                        "HDWQ (%d): Rd %016llx Wr %016llx "
                                        "IO %016llx ",
                                        i, data1, data2, data3);
                        len += scnprintf(buf + len, PAGE_SIZE - len,
                                        "Cmpl %016llx OutIO %016llx\n",
                                        tot, ((data1 + data2 + data3) - tot));
                }
                len += scnprintf(buf + len, PAGE_SIZE - len,
                                "Total FCP Cmpl %016llx Issue %016llx "
                                "OutIO %016llx\n",
                                totin, totout, totout - totin);

                len += scnprintf(buf + len, size - len,
                                "LS Xmt Err: Abrt %08x Err %08x  "
                                "Cmpl Err: xb %08x Err %08x\n",
                                atomic_read(&lport->xmt_ls_abort),
                                atomic_read(&lport->xmt_ls_err),
                                atomic_read(&lport->cmpl_ls_xb),
                                atomic_read(&lport->cmpl_ls_err));

                len += scnprintf(buf + len, size - len,
                                "FCP Xmt Err: noxri %06x nondlp %06x "
                                "qdepth %06x wqerr %06x err %06x Abrt %06x\n",
                                atomic_read(&lport->xmt_fcp_noxri),
                                atomic_read(&lport->xmt_fcp_bad_ndlp),
                                atomic_read(&lport->xmt_fcp_qdepth),
                                atomic_read(&lport->xmt_fcp_wqerr),
                                atomic_read(&lport->xmt_fcp_err),
                                atomic_read(&lport->xmt_fcp_abort));

                len += scnprintf(buf + len, size - len,
                                "FCP Cmpl Err: xb %08x Err %08x\n",
                                atomic_read(&lport->cmpl_fcp_xb),
                                atomic_read(&lport->cmpl_fcp_err));

        }

        return len;
}

/**
 * lpfc_debugfs_scsistat_data - Dump target node list to a buffer
 * @vport: The vport to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the SCSI statistics associated with @vport
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_scsistat_data(struct lpfc_vport *vport, char *buf, int size)
{
        int len;
        struct lpfc_hba *phba = vport->phba;
        struct lpfc_fc4_ctrl_stat *cstat;
        u64 data1, data2, data3;
        u64 tot, totin, totout;
        int i;
        char tmp[LPFC_MAX_SCSI_INFO_TMP_LEN] = {0};

        if (!(vport->cfg_enable_fc4_type & LPFC_ENABLE_FCP) ||
            (phba->sli_rev != LPFC_SLI_REV4))
                return 0;

        scnprintf(buf, size, "SCSI HDWQ Statistics\n");

        totin = 0;
        totout = 0;
        for (i = 0; i < phba->cfg_hdw_queue; i++) {
                cstat = &phba->sli4_hba.hdwq[i].scsi_cstat;
                tot = cstat->io_cmpls;
                totin += tot;
                data1 = cstat->input_requests;
                data2 = cstat->output_requests;
                data3 = cstat->control_requests;
                totout += (data1 + data2 + data3);

                scnprintf(tmp, sizeof(tmp), "HDWQ (%d): Rd %016llx Wr %016llx "
                          "IO %016llx ", i, data1, data2, data3);
                if (strlcat(buf, tmp, size) >= size)
                        goto buffer_done;

                scnprintf(tmp, sizeof(tmp), "Cmpl %016llx OutIO %016llx\n",
                          tot, ((data1 + data2 + data3) - tot));
                if (strlcat(buf, tmp, size) >= size)
                        goto buffer_done;
        }
        scnprintf(tmp, sizeof(tmp), "Total FCP Cmpl %016llx Issue %016llx "
                  "OutIO %016llx\n", totin, totout, totout - totin);
        strlcat(buf, tmp, size);

buffer_done:
        len = strnlen(buf, size);

        return len;
}

/**
 * lpfc_debugfs_nvmektime_data - Dump target node list to a buffer
 * @vport: The vport to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the NVME statistics associated with @vport
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)
{
        struct lpfc_hba   *phba = vport->phba;
        int len = 0;

        if (phba->nvmet_support == 0) {
                /* NVME Initiator */
                len += scnprintf(buf + len, PAGE_SIZE - len,
                                "ktime %s: Total Samples: %lld\n",
                                (phba->ktime_on ?  "Enabled" : "Disabled"),
                                phba->ktime_data_samples);
                if (phba->ktime_data_samples == 0)
                        return len;

                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "Segment 1: Last NVME Cmd cmpl "
                        "done -to- Start of next NVME cnd (in driver)\n");
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg1_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg1_min,
                        phba->ktime_seg1_max);
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "Segment 2: Driver start of NVME cmd "
                        "-to- Firmware WQ doorbell\n");
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg2_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg2_min,
                        phba->ktime_seg2_max);
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "Segment 3: Firmware WQ doorbell -to- "
                        "MSI-X ISR cmpl\n");
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg3_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg3_min,
                        phba->ktime_seg3_max);
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "Segment 4: MSI-X ISR cmpl -to- "
                        "NVME cmpl done\n");
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg4_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg4_min,
                        phba->ktime_seg4_max);
                len += scnprintf(
                        buf + len, PAGE_SIZE - len,
                        "Total IO avg time: %08lld\n",
                        div_u64(phba->ktime_seg1_total +
                        phba->ktime_seg2_total  +
                        phba->ktime_seg3_total +
                        phba->ktime_seg4_total,
                        phba->ktime_data_samples));
                return len;
        }

        /* NVME Target */
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "ktime %s: Total Samples: %lld %lld\n",
                        (phba->ktime_on ? "Enabled" : "Disabled"),
                        phba->ktime_data_samples,
                        phba->ktime_status_samples);
        if (phba->ktime_data_samples == 0)
                return len;

        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 1: MSI-X ISR Rcv cmd -to- "
                        "cmd pass to NVME Layer\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg1_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg1_min,
                        phba->ktime_seg1_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 2: cmd pass to NVME Layer- "
                        "-to- Driver rcv cmd OP (action)\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg2_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg2_min,
                        phba->ktime_seg2_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 3: Driver rcv cmd OP -to- "
                        "Firmware WQ doorbell: cmd\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg3_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg3_min,
                        phba->ktime_seg3_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 4: Firmware WQ doorbell: cmd "
                        "-to- MSI-X ISR for cmd cmpl\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg4_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg4_min,
                        phba->ktime_seg4_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 5: MSI-X ISR for cmd cmpl "
                        "-to- NVME layer passed cmd done\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg5_total,
                                phba->ktime_data_samples),
                        phba->ktime_seg5_min,
                        phba->ktime_seg5_max);

        if (phba->ktime_status_samples == 0) {
                len += scnprintf(buf + len, PAGE_SIZE-len,
                                "Total: cmd received by MSI-X ISR "
                                "-to- cmd completed on wire\n");
                len += scnprintf(buf + len, PAGE_SIZE-len,
                                "avg:%08lld min:%08lld "
                                "max %08lld\n",
                                div_u64(phba->ktime_seg10_total,
                                        phba->ktime_data_samples),
                                phba->ktime_seg10_min,
                                phba->ktime_seg10_max);
                return len;
        }

        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 6: NVME layer passed cmd done "
                        "-to- Driver rcv rsp status OP\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg6_total,
                                phba->ktime_status_samples),
                        phba->ktime_seg6_min,
                        phba->ktime_seg6_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 7: Driver rcv rsp status OP "
                        "-to- Firmware WQ doorbell: status\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg7_total,
                                phba->ktime_status_samples),
                        phba->ktime_seg7_min,
                        phba->ktime_seg7_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 8: Firmware WQ doorbell: status"
                        " -to- MSI-X ISR for status cmpl\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg8_total,
                                phba->ktime_status_samples),
                        phba->ktime_seg8_min,
                        phba->ktime_seg8_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Segment 9: MSI-X ISR for status cmpl  "
                        "-to- NVME layer passed status done\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg9_total,
                                phba->ktime_status_samples),
                        phba->ktime_seg9_min,
                        phba->ktime_seg9_max);
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "Total: cmd received by MSI-X ISR -to- "
                        "cmd completed on wire\n");
        len += scnprintf(buf + len, PAGE_SIZE-len,
                        "avg:%08lld min:%08lld max %08lld\n",
                        div_u64(phba->ktime_seg10_total,
                                phba->ktime_status_samples),
                        phba->ktime_seg10_min,
                        phba->ktime_seg10_max);
        return len;
}

/**
 * lpfc_debugfs_nvmeio_trc_data - Dump NVME IO trace list to a buffer
 * @phba: The phba to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the NVME IO trace associated with @phba
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_nvmeio_trc_data(struct lpfc_hba *phba, char *buf, int size)
{
        struct lpfc_debugfs_nvmeio_trc *dtp;
        int i, state, index, skip;
        int len = 0;

        state = phba->nvmeio_trc_on;

        index = (atomic_read(&phba->nvmeio_trc_cnt) + 1) &
                (phba->nvmeio_trc_size - 1);
        skip = phba->nvmeio_trc_output_idx;

        len += scnprintf(buf + len, size - len,
                        "%s IO Trace %s: next_idx %d skip %d size %d\n",
                        (phba->nvmet_support ? "NVME" : "NVMET"),
                        (state ? "Enabled" : "Disabled"),
                        index, skip, phba->nvmeio_trc_size);

        if (!phba->nvmeio_trc || state)
                return len;

        /* trace MUST bhe off to continue */

        for (i = index; i < phba->nvmeio_trc_size; i++) {
                if (skip) {
                        skip--;
                        continue;
                }
                dtp = phba->nvmeio_trc + i;
                phba->nvmeio_trc_output_idx++;

                if (!dtp->fmt)
                        continue;

                len +=  scnprintf(buf + len, size - len, dtp->fmt,
                        dtp->data1, dtp->data2, dtp->data3);

                if (phba->nvmeio_trc_output_idx >= phba->nvmeio_trc_size) {
                        phba->nvmeio_trc_output_idx = 0;
                        len += scnprintf(buf + len, size - len,
                                        "Trace Complete\n");
                        goto out;
                }

                if (len >= (size - LPFC_DEBUG_OUT_LINE_SZ)) {
                        len += scnprintf(buf + len, size - len,
                                        "Trace Continue (%d of %d)\n",
                                        phba->nvmeio_trc_output_idx,
                                        phba->nvmeio_trc_size);
                        goto out;
                }
        }
        for (i = 0; i < index; i++) {
                if (skip) {
                        skip--;
                        continue;
                }
                dtp = phba->nvmeio_trc + i;
                phba->nvmeio_trc_output_idx++;

                if (!dtp->fmt)
                        continue;

                len +=  scnprintf(buf + len, size - len, dtp->fmt,
                        dtp->data1, dtp->data2, dtp->data3);

                if (phba->nvmeio_trc_output_idx >= phba->nvmeio_trc_size) {
                        phba->nvmeio_trc_output_idx = 0;
                        len += scnprintf(buf + len, size - len,
                                        "Trace Complete\n");
                        goto out;
                }

                if (len >= (size - LPFC_DEBUG_OUT_LINE_SZ)) {
                        len += scnprintf(buf + len, size - len,
                                        "Trace Continue (%d of %d)\n",
                                        phba->nvmeio_trc_output_idx,
                                        phba->nvmeio_trc_size);
                        goto out;
                }
        }

        len += scnprintf(buf + len, size - len,
                        "Trace Done\n");
out:
        return len;
}

/**
 * lpfc_debugfs_cpucheck_data - Dump target node list to a buffer
 * @vport: The vport to gather target node info from.
 * @buf: The buffer to dump log into.
 * @size: The maximum amount of data to process.
 *
 * Description:
 * This routine dumps the NVME statistics associated with @vport
 *
 * Return Value:
 * This routine returns the amount of bytes that were dumped into @buf and will
 * not exceed @size.
 **/
static int
lpfc_debugfs_cpucheck_data(struct lpfc_vport *vport, char *buf, int size)
{
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_sli4_hdw_queue *qp;
        int i, j, max_cnt;
        int len = 0;
        uint32_t tot_xmt;
        uint32_t tot_rcv;
        uint32_t tot_cmpl;

        len += scnprintf(buf + len, PAGE_SIZE - len,
                        "CPUcheck %s ",
                        (phba->cpucheck_on & LPFC_CHECK_NVME_IO ?
                                "Enabled" : "Disabled"));
        if (phba->nvmet_support) {
                len += scnprintf(buf + len, PAGE_SIZE - len,
                                "%s\n",
                                (phba->cpucheck_on & LPFC_CHECK_NVMET_RCV ?
                                        "Rcv Enabled\n" : "Rcv Disabled\n"));
        } else {
                len += scnprintf(buf + len, PAGE_SIZE - len, "\n");
        }
        max_cnt = size - LPFC_DEBUG_OUT_LINE_SZ;

        for (i = 0; i < phba->cfg_hdw_queue; i++) {
                qp = &phba->sli4_hba.hdwq[i];

                tot_rcv = 0;
                tot_xmt = 0;
                tot_cmpl = 0;
                for (j = 0; j < LPFC_CHECK_CPU_CNT; j++) {
                        tot_xmt += qp->cpucheck_xmt_io[j];
                        tot_cmpl += qp->cpucheck_cmpl_io[j];
                        if (phba->nvmet_support)
                                tot_rcv += qp->cpucheck_rcv_io[j];
                }

                /* Only display Hardware Qs with something */
                if (!tot_xmt && !tot_cmpl && !tot_rcv)
                        continue;

                len += scnprintf(buf + len, PAGE_SIZE - len,
                                "HDWQ %03d: ", i);
                for (j = 0; j < LPFC_CHECK_CPU_CNT; j++) {
                        /* Only display non-zero counters */
                        if (!qp->cpucheck_xmt_io[j] &&
                            !qp->cpucheck_cmpl_io[j] &&
                            !qp->cpucheck_rcv_io[j])
                                continue;
                        if (phba->nvmet_support) {
                                len += scnprintf(buf + len, PAGE_SIZE - len,
                                                "CPU %03d: %x/%x/%x ", j,
                                                qp->cpucheck_rcv_io[j],
                                                qp->cpucheck_xmt_io[j],
                                                qp->cpucheck_cmpl_io[j]);
                        } else {
                                len += scnprintf(buf + len, PAGE_SIZE - len,
                                                "CPU %03d: %x/%x ", j,
                                                qp->cpucheck_xmt_io[j],
                                                qp->cpucheck_cmpl_io[j]);
                        }
                }
                len += scnprintf(buf + len, PAGE_SIZE - len,
                                "Total: %x\n", tot_xmt);
                if (len >= max_cnt) {
                        len += scnprintf(buf + len, PAGE_SIZE - len,
                                        "Truncated ...\n");
                        return len;
                }
        }
        return len;
}

#endif

/**
 * lpfc_debugfs_disc_trc - Store discovery trace log
 * @vport: The vport to associate this trace string with for retrieval.
 * @mask: Log entry classification.
 * @fmt: Format string to be displayed when dumping the log.
 * @data1: 1st data parameter to be applied to @fmt.
 * @data2: 2nd data parameter to be applied to @fmt.
 * @data3: 3rd data parameter to be applied to @fmt.
 *
 * Description:
 * This routine is used by the driver code to add a debugfs log entry to the
 * discovery trace buffer associated with @vport. Only entries with a @mask that
 * match the current debugfs discovery mask will be saved. Entries that do not
 * match will be thrown away. @fmt, @data1, @data2, and @data3 are used like
 * printf when displaying the log.
 **/
inline void
lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt,
        uint32_t data1, uint32_t data2, uint32_t data3)
{
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        struct lpfc_debugfs_trc *dtp;
        int index;

        if (!(lpfc_debugfs_mask_disc_trc & mask))
                return;

        if (!lpfc_debugfs_enable || !lpfc_debugfs_max_disc_trc ||
                !vport || !vport->disc_trc)
                return;

        index = atomic_inc_return(&vport->disc_trc_cnt) &
                (lpfc_debugfs_max_disc_trc - 1);
        dtp = vport->disc_trc + index;
        dtp->fmt = fmt;
        dtp->data1 = data1;
        dtp->data2 = data2;
        dtp->data3 = data3;
        dtp->seq_cnt = atomic_inc_return(&lpfc_debugfs_seq_trc_cnt);
        dtp->jif = jiffies;
#endif
        return;
}

/**
 * lpfc_debugfs_slow_ring_trc - Store slow ring trace log
 * @phba: The phba to associate this trace string with for retrieval.
 * @fmt: Format string to be displayed when dumping the log.
 * @data1: 1st data parameter to be applied to @fmt.
 * @data2: 2nd data parameter to be applied to @fmt.
 * @data3: 3rd data parameter to be applied to @fmt.
 *
 * Description:
 * This routine is used by the driver code to add a debugfs log entry to the
 * discovery trace buffer associated with @vport. @fmt, @data1, @data2, and
 * @data3 are used like printf when displaying the log.
 **/
inline void
lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt,
        uint32_t data1, uint32_t data2, uint32_t data3)
{
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        struct lpfc_debugfs_trc *dtp;
        int index;

        if (!lpfc_debugfs_enable || !lpfc_debugfs_max_slow_ring_trc ||
                !phba || !phba->slow_ring_trc)
                return;

        index = atomic_inc_return(&phba->slow_ring_trc_cnt) &
                (lpfc_debugfs_max_slow_ring_trc - 1);
        dtp = phba->slow_ring_trc + index;
        dtp->fmt = fmt;
        dtp->data1 = data1;
        dtp->data2 = data2;
        dtp->data3 = data3;
        dtp->seq_cnt = atomic_inc_return(&lpfc_debugfs_seq_trc_cnt);
        dtp->jif = jiffies;
#endif
        return;
}

/**
 * lpfc_debugfs_nvme_trc - Store NVME/NVMET trace log
 * @phba: The phba to associate this trace string with for retrieval.
 * @fmt: Format string to be displayed when dumping the log.
 * @data1: 1st data parameter to be applied to @fmt.
 * @data2: 2nd data parameter to be applied to @fmt.
 * @data3: 3rd data parameter to be applied to @fmt.
 *
 * Description:
 * This routine is used by the driver code to add a debugfs log entry to the
 * nvme trace buffer associated with @phba. @fmt, @data1, @data2, and
 * @data3 are used like printf when displaying the log.
 **/
inline void
lpfc_debugfs_nvme_trc(struct lpfc_hba *phba, char *fmt,
                      uint16_t data1, uint16_t data2, uint32_t data3)
{
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        struct lpfc_debugfs_nvmeio_trc *dtp;
        int index;

        if (!phba->nvmeio_trc_on || !phba->nvmeio_trc)
                return;

        index = atomic_inc_return(&phba->nvmeio_trc_cnt) &
                (phba->nvmeio_trc_size - 1);
        dtp = phba->nvmeio_trc + index;
        dtp->fmt = fmt;
        dtp->data1 = data1;
        dtp->data2 = data2;
        dtp->data3 = data3;
#endif
}

#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
/**
 * lpfc_debugfs_disc_trc_open - Open the discovery trace log
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_disc_trc_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int size;
        int rc = -ENOMEM;

        if (!lpfc_debugfs_max_disc_trc) {
                rc = -ENOSPC;
                goto out;
        }

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        size =  (lpfc_debugfs_max_disc_trc * LPFC_DEBUG_TRC_ENTRY_SIZE);
        size = PAGE_ALIGN(size);

        debug->buffer = kmalloc(size, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_disc_trc_data(vport, debug->buffer, size);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

/**
 * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_slow_ring_trc_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int size;
        int rc = -ENOMEM;

        if (!lpfc_debugfs_max_slow_ring_trc) {
                rc = -ENOSPC;
                goto out;
        }

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        size =  (lpfc_debugfs_max_slow_ring_trc * LPFC_DEBUG_TRC_ENTRY_SIZE);
        size = PAGE_ALIGN(size);

        debug->buffer = kmalloc(size, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_slow_ring_trc_data(phba, debug->buffer, size);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

/**
 * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_hbqinfo_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_HBQINFO_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_hbqinfo_data(phba, debug->buffer,
                LPFC_HBQINFO_SIZE);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

/**
 * lpfc_debugfs_multixripools_open - Open the multixripool debugfs buffer
 * @inode: The inode pointer that contains a hba pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the hba from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this hba, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_multixripools_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kzalloc(LPFC_DUMP_MULTIXRIPOOL_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_multixripools_data(
                phba, debug->buffer, LPFC_DUMP_MULTIXRIPOOL_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

#ifdef LPFC_HDWQ_LOCK_STAT
/**
 * lpfc_debugfs_lockstat_open - Open the lockstat debugfs buffer
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_lockstat_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_HDWQINFO_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_lockstat_data(phba, debug->buffer,
                LPFC_HBQINFO_SIZE);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_lockstat_write(struct file *file, const char __user *buf,
                            size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        struct lpfc_sli4_hdw_queue *qp;
        char mybuf[64];
        char *pbuf;
        int i;

        /* Protect copy from user */
        if (!access_ok(buf, nbytes))
                return -EFAULT;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        if ((strncmp(pbuf, "reset", strlen("reset")) == 0) ||
            (strncmp(pbuf, "zero", strlen("zero")) == 0)) {
                for (i = 0; i < phba->cfg_hdw_queue; i++) {
                        qp = &phba->sli4_hba.hdwq[i];
                        qp->lock_conflict.alloc_xri_get = 0;
                        qp->lock_conflict.alloc_xri_put = 0;
                        qp->lock_conflict.free_xri = 0;
                        qp->lock_conflict.wq_access = 0;
                        qp->lock_conflict.alloc_pvt_pool = 0;
                        qp->lock_conflict.mv_from_pvt_pool = 0;
                        qp->lock_conflict.mv_to_pub_pool = 0;
                        qp->lock_conflict.mv_to_pvt_pool = 0;
                        qp->lock_conflict.free_pvt_pool = 0;
                        qp->lock_conflict.free_pub_pool = 0;
                        qp->lock_conflict.wq_access = 0;
                }
        }
        return nbytes;
}
#endif

static int lpfc_debugfs_ras_log_data(struct lpfc_hba *phba,
                                     char *buffer, int size)
{
        int copied = 0;
        struct lpfc_dmabuf *dmabuf, *next;

        memset(buffer, 0, size);

        spin_lock_irq(&phba->hbalock);
        if (phba->ras_fwlog.state != ACTIVE) {
                spin_unlock_irq(&phba->hbalock);
                return -EINVAL;
        }
        spin_unlock_irq(&phba->hbalock);

        list_for_each_entry_safe(dmabuf, next,
                                 &phba->ras_fwlog.fwlog_buff_list, list) {
                /* Check if copying will go over size and a '\0' char */
                if ((copied + LPFC_RAS_MAX_ENTRY_SIZE) >= (size - 1)) {
                        memcpy(buffer + copied, dmabuf->virt,
                               size - copied - 1);
                        copied += size - copied - 1;
                        break;
                }
                memcpy(buffer + copied, dmabuf->virt, LPFC_RAS_MAX_ENTRY_SIZE);
                copied += LPFC_RAS_MAX_ENTRY_SIZE;
        }
        return copied;
}

static int
lpfc_debugfs_ras_log_release(struct inode *inode, struct file *file)
{
        struct lpfc_debug *debug = file->private_data;

        vfree(debug->buffer);
        kfree(debug);

        return 0;
}

/**
 * lpfc_debugfs_ras_log_open - Open the RAS log debugfs buffer
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_ras_log_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int size;
        int rc = -ENOMEM;

        spin_lock_irq(&phba->hbalock);
        if (phba->ras_fwlog.state != ACTIVE) {
                spin_unlock_irq(&phba->hbalock);
                rc = -EINVAL;
                goto out;
        }
        spin_unlock_irq(&phba->hbalock);
        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        size = LPFC_RAS_MIN_BUFF_POST_SIZE * phba->cfg_ras_fwlog_buffsize;
        debug->buffer = vmalloc(size);
        if (!debug->buffer)
                goto free_debug;

        debug->len = lpfc_debugfs_ras_log_data(phba, debug->buffer, size);
        if (debug->len < 0) {
                rc = -EINVAL;
                goto free_buffer;
        }
        file->private_data = debug;

        return 0;

free_buffer:
        vfree(debug->buffer);
free_debug:
        kfree(debug);
out:
        return rc;
}

/**
 * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_dumpHBASlim_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_DUMPHBASLIM_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_dumpHBASlim_data(phba, debug->buffer,
                LPFC_DUMPHBASLIM_SIZE);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

/**
 * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_dumpHostSlim_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_DUMPHOSTSLIM_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_dumpHostSlim_data(phba, debug->buffer,
                LPFC_DUMPHOSTSLIM_SIZE);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_dif_err_read(struct file *file, char __user *buf,
        size_t nbytes, loff_t *ppos)
{
        struct dentry *dent = file->f_path.dentry;
        struct lpfc_hba *phba = file->private_data;
        char cbuf[32];
        uint64_t tmp = 0;
        int cnt = 0;

        if (dent == phba->debug_writeGuard)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wgrd_cnt);
        else if (dent == phba->debug_writeApp)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wapp_cnt);
        else if (dent == phba->debug_writeRef)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_wref_cnt);
        else if (dent == phba->debug_readGuard)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rgrd_cnt);
        else if (dent == phba->debug_readApp)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rapp_cnt);
        else if (dent == phba->debug_readRef)
                cnt = scnprintf(cbuf, 32, "%u\n", phba->lpfc_injerr_rref_cnt);
        else if (dent == phba->debug_InjErrNPortID)
                cnt = scnprintf(cbuf, 32, "0x%06x\n",
                                phba->lpfc_injerr_nportid);
        else if (dent == phba->debug_InjErrWWPN) {
                memcpy(&tmp, &phba->lpfc_injerr_wwpn, sizeof(struct lpfc_name));
                tmp = cpu_to_be64(tmp);
                cnt = scnprintf(cbuf, 32, "0x%016llx\n", tmp);
        } else if (dent == phba->debug_InjErrLBA) {
                if (phba->lpfc_injerr_lba == (sector_t)(-1))
                        cnt = scnprintf(cbuf, 32, "off\n");
                else
                        cnt = scnprintf(cbuf, 32, "0x%llx\n",
                                 (uint64_t) phba->lpfc_injerr_lba);
        } else
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                         "0547 Unknown debugfs error injection entry\n");

        return simple_read_from_buffer(buf, nbytes, ppos, &cbuf, cnt);
}

static ssize_t
lpfc_debugfs_dif_err_write(struct file *file, const char __user *buf,
        size_t nbytes, loff_t *ppos)
{
        struct dentry *dent = file->f_path.dentry;
        struct lpfc_hba *phba = file->private_data;
        char dstbuf[33];
        uint64_t tmp = 0;
        int size;

        memset(dstbuf, 0, 33);
        size = (nbytes < 32) ? nbytes : 32;
        if (copy_from_user(dstbuf, buf, size))
                return 0;

        if (dent == phba->debug_InjErrLBA) {
                if ((buf[0] == 'o') && (buf[1] == 'f') && (buf[2] == 'f'))
                        tmp = (uint64_t)(-1);
        }

        if ((tmp == 0) && (kstrtoull(dstbuf, 0, &tmp)))
                return 0;

        if (dent == phba->debug_writeGuard)
                phba->lpfc_injerr_wgrd_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_writeApp)
                phba->lpfc_injerr_wapp_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_writeRef)
                phba->lpfc_injerr_wref_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_readGuard)
                phba->lpfc_injerr_rgrd_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_readApp)
                phba->lpfc_injerr_rapp_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_readRef)
                phba->lpfc_injerr_rref_cnt = (uint32_t)tmp;
        else if (dent == phba->debug_InjErrLBA)
                phba->lpfc_injerr_lba = (sector_t)tmp;
        else if (dent == phba->debug_InjErrNPortID)
                phba->lpfc_injerr_nportid = (uint32_t)(tmp & Mask_DID);
        else if (dent == phba->debug_InjErrWWPN) {
                tmp = cpu_to_be64(tmp);
                memcpy(&phba->lpfc_injerr_wwpn, &tmp, sizeof(struct lpfc_name));
        } else
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                         "0548 Unknown debugfs error injection entry\n");

        return nbytes;
}

static int
lpfc_debugfs_dif_err_release(struct inode *inode, struct file *file)
{
        return 0;
}

/**
 * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file
 * @inode: The inode pointer that contains a vport pointer.
 * @file: The file pointer to attach the log output.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It gets
 * the vport from the i_private field in @inode, allocates the necessary buffer
 * for the log, fills the buffer from the in-memory log for this vport, and then
 * returns a pointer to that log in the private_data field in @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return a negative
 * error value.
 **/
static int
lpfc_debugfs_nodelist_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

        /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_NODELIST_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_nodelist_data(vport, debug->buffer,
                LPFC_NODELIST_SIZE);
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

/**
 * lpfc_debugfs_lseek - Seek through a debugfs file
 * @file: The file pointer to seek through.
 * @off: The offset to seek to or the amount to seek by.
 * @whence: Indicates how to seek.
 *
 * Description:
 * This routine is the entry point for the debugfs lseek file operation. The
 * @whence parameter indicates whether @off is the offset to directly seek to,
 * or if it is a value to seek forward or reverse by. This function figures out
 * what the new offset of the debugfs file will be and assigns that value to the
 * f_pos field of @file.
 *
 * Returns:
 * This function returns the new offset if successful and returns a negative
 * error if unable to process the seek.
 **/
static loff_t
lpfc_debugfs_lseek(struct file *file, loff_t off, int whence)
{
        struct lpfc_debug *debug = file->private_data;
        return fixed_size_llseek(file, off, whence, debug->len);
}

/**
 * lpfc_debugfs_read - Read a debugfs file
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the data to.
 * @nbytes: The number of bytes to read.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine reads data from from the buffer indicated in the private_data
 * field of @file. It will start reading at @ppos and copy up to @nbytes of
 * data to @buf.
 *
 * Returns:
 * This function returns the amount of data that was read (this could be less
 * than @nbytes if the end of the file was reached) or a negative error value.
 **/
static ssize_t
lpfc_debugfs_read(struct file *file, char __user *buf,
                  size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;

        return simple_read_from_buffer(buf, nbytes, ppos, debug->buffer,
                                       debug->len);
}

/**
 * lpfc_debugfs_release - Release the buffer used to store debugfs file data
 * @inode: The inode pointer that contains a vport pointer. (unused)
 * @file: The file pointer that contains the buffer to release.
 *
 * Description:
 * This routine frees the buffer that was allocated when the debugfs file was
 * opened.
 *
 * Returns:
 * This function returns zero.
 **/
static int
lpfc_debugfs_release(struct inode *inode, struct file *file)
{
        struct lpfc_debug *debug = file->private_data;

        kfree(debug->buffer);
        kfree(debug);

        return 0;
}

/**
 * lpfc_debugfs_multixripools_write - Clear multi-XRI pools statistics
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the user data from.
 * @nbytes: The number of bytes to get.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine clears multi-XRI pools statistics when buf contains "clear".
 *
 * Return Value:
 * It returns the @nbytges passing in from debugfs user space when successful.
 * In case of error conditions, it returns proper error code back to the user
 * space.
 **/
static ssize_t
lpfc_debugfs_multixripools_write(struct file *file, const char __user *buf,
                                 size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        char mybuf[64];
        char *pbuf;
        u32 i;
        u32 hwq_count;
        struct lpfc_sli4_hdw_queue *qp;
        struct lpfc_multixri_pool *multixri_pool;

        if (nbytes > 64)
                nbytes = 64;

        /* Protect copy from user */
        if (!access_ok(buf, nbytes))
                return -EFAULT;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        if ((strncmp(pbuf, "clear", strlen("clear"))) == 0) {
                hwq_count = phba->cfg_hdw_queue;
                for (i = 0; i < hwq_count; i++) {
                        qp = &phba->sli4_hba.hdwq[i];
                        multixri_pool = qp->p_multixri_pool;
                        if (!multixri_pool)
                                continue;

                        qp->empty_io_bufs = 0;
                        multixri_pool->pbl_empty_count = 0;
#ifdef LPFC_MXP_STAT
                        multixri_pool->above_limit_count = 0;
                        multixri_pool->below_limit_count = 0;
                        multixri_pool->stat_max_hwm = 0;
                        multixri_pool->local_pbl_hit_count = 0;
                        multixri_pool->other_pbl_hit_count = 0;

                        multixri_pool->stat_pbl_count = 0;
                        multixri_pool->stat_pvt_count = 0;
                        multixri_pool->stat_busy_count = 0;
                        multixri_pool->stat_snapshot_taken = 0;
#endif
                }
                return strlen(pbuf);
        }

        return -EINVAL;
}

static int
lpfc_debugfs_nvmestat_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

         /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_NVMESTAT_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_nvmestat_data(vport, debug->buffer,
                LPFC_NVMESTAT_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_nvmestat_write(struct file *file, const char __user *buf,
                            size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_vport *vport = (struct lpfc_vport *)debug->i_private;
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_nvmet_tgtport *tgtp;
        char mybuf[64];
        char *pbuf;

        if (!phba->targetport)
                return -ENXIO;

        if (nbytes > 64)
                nbytes = 64;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private;
        if ((strncmp(pbuf, "reset", strlen("reset")) == 0) ||
            (strncmp(pbuf, "zero", strlen("zero")) == 0)) {
                atomic_set(&tgtp->rcv_ls_req_in, 0);
                atomic_set(&tgtp->rcv_ls_req_out, 0);
                atomic_set(&tgtp->rcv_ls_req_drop, 0);
                atomic_set(&tgtp->xmt_ls_abort, 0);
                atomic_set(&tgtp->xmt_ls_abort_cmpl, 0);
                atomic_set(&tgtp->xmt_ls_rsp, 0);
                atomic_set(&tgtp->xmt_ls_drop, 0);
                atomic_set(&tgtp->xmt_ls_rsp_error, 0);
                atomic_set(&tgtp->xmt_ls_rsp_cmpl, 0);

                atomic_set(&tgtp->rcv_fcp_cmd_in, 0);
                atomic_set(&tgtp->rcv_fcp_cmd_out, 0);
                atomic_set(&tgtp->rcv_fcp_cmd_drop, 0);
                atomic_set(&tgtp->xmt_fcp_drop, 0);
                atomic_set(&tgtp->xmt_fcp_read_rsp, 0);
                atomic_set(&tgtp->xmt_fcp_read, 0);
                atomic_set(&tgtp->xmt_fcp_write, 0);
                atomic_set(&tgtp->xmt_fcp_rsp, 0);
                atomic_set(&tgtp->xmt_fcp_release, 0);
                atomic_set(&tgtp->xmt_fcp_rsp_cmpl, 0);
                atomic_set(&tgtp->xmt_fcp_rsp_error, 0);
                atomic_set(&tgtp->xmt_fcp_rsp_drop, 0);

                atomic_set(&tgtp->xmt_fcp_abort, 0);
                atomic_set(&tgtp->xmt_fcp_abort_cmpl, 0);
                atomic_set(&tgtp->xmt_abort_sol, 0);
                atomic_set(&tgtp->xmt_abort_unsol, 0);
                atomic_set(&tgtp->xmt_abort_rsp, 0);
                atomic_set(&tgtp->xmt_abort_rsp_error, 0);
        }
        return nbytes;
}

static int
lpfc_debugfs_scsistat_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

         /* Round to page boundary */
        debug->buffer = kzalloc(LPFC_SCSISTAT_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_scsistat_data(vport, debug->buffer,
                LPFC_SCSISTAT_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_scsistat_write(struct file *file, const char __user *buf,
                            size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_vport *vport = (struct lpfc_vport *)debug->i_private;
        struct lpfc_hba *phba = vport->phba;
        char mybuf[6] = {0};
        int i;

        /* Protect copy from user */
        if (!access_ok(buf, nbytes))
                return -EFAULT;

        if (copy_from_user(mybuf, buf, (nbytes >= sizeof(mybuf)) ?
                                       (sizeof(mybuf) - 1) : nbytes))
                return -EFAULT;

        if ((strncmp(&mybuf[0], "reset", strlen("reset")) == 0) ||
            (strncmp(&mybuf[0], "zero", strlen("zero")) == 0)) {
                for (i = 0; i < phba->cfg_hdw_queue; i++) {
                        memset(&phba->sli4_hba.hdwq[i].scsi_cstat, 0,
                               sizeof(phba->sli4_hba.hdwq[i].scsi_cstat));
                }
        }

        return nbytes;
}

static int
lpfc_debugfs_nvmektime_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

         /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_NVMEKTIME_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_nvmektime_data(vport, debug->buffer,
                LPFC_NVMEKTIME_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_nvmektime_write(struct file *file, const char __user *buf,
                             size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_vport *vport = (struct lpfc_vport *)debug->i_private;
        struct lpfc_hba   *phba = vport->phba;
        char mybuf[64];
        char *pbuf;

        if (nbytes > 64)
                nbytes = 64;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        if ((strncmp(pbuf, "on", sizeof("on") - 1) == 0)) {
                phba->ktime_data_samples = 0;
                phba->ktime_status_samples = 0;
                phba->ktime_seg1_total = 0;
                phba->ktime_seg1_max = 0;
                phba->ktime_seg1_min = 0xffffffff;
                phba->ktime_seg2_total = 0;
                phba->ktime_seg2_max = 0;
                phba->ktime_seg2_min = 0xffffffff;
                phba->ktime_seg3_total = 0;
                phba->ktime_seg3_max = 0;
                phba->ktime_seg3_min = 0xffffffff;
                phba->ktime_seg4_total = 0;
                phba->ktime_seg4_max = 0;
                phba->ktime_seg4_min = 0xffffffff;
                phba->ktime_seg5_total = 0;
                phba->ktime_seg5_max = 0;
                phba->ktime_seg5_min = 0xffffffff;
                phba->ktime_seg6_total = 0;
                phba->ktime_seg6_max = 0;
                phba->ktime_seg6_min = 0xffffffff;
                phba->ktime_seg7_total = 0;
                phba->ktime_seg7_max = 0;
                phba->ktime_seg7_min = 0xffffffff;
                phba->ktime_seg8_total = 0;
                phba->ktime_seg8_max = 0;
                phba->ktime_seg8_min = 0xffffffff;
                phba->ktime_seg9_total = 0;
                phba->ktime_seg9_max = 0;
                phba->ktime_seg9_min = 0xffffffff;
                phba->ktime_seg10_total = 0;
                phba->ktime_seg10_max = 0;
                phba->ktime_seg10_min = 0xffffffff;

                phba->ktime_on = 1;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "off",
                   sizeof("off") - 1) == 0)) {
                phba->ktime_on = 0;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "zero",
                   sizeof("zero") - 1) == 0)) {
                phba->ktime_data_samples = 0;
                phba->ktime_status_samples = 0;
                phba->ktime_seg1_total = 0;
                phba->ktime_seg1_max = 0;
                phba->ktime_seg1_min = 0xffffffff;
                phba->ktime_seg2_total = 0;
                phba->ktime_seg2_max = 0;
                phba->ktime_seg2_min = 0xffffffff;
                phba->ktime_seg3_total = 0;
                phba->ktime_seg3_max = 0;
                phba->ktime_seg3_min = 0xffffffff;
                phba->ktime_seg4_total = 0;
                phba->ktime_seg4_max = 0;
                phba->ktime_seg4_min = 0xffffffff;
                phba->ktime_seg5_total = 0;
                phba->ktime_seg5_max = 0;
                phba->ktime_seg5_min = 0xffffffff;
                phba->ktime_seg6_total = 0;
                phba->ktime_seg6_max = 0;
                phba->ktime_seg6_min = 0xffffffff;
                phba->ktime_seg7_total = 0;
                phba->ktime_seg7_max = 0;
                phba->ktime_seg7_min = 0xffffffff;
                phba->ktime_seg8_total = 0;
                phba->ktime_seg8_max = 0;
                phba->ktime_seg8_min = 0xffffffff;
                phba->ktime_seg9_total = 0;
                phba->ktime_seg9_max = 0;
                phba->ktime_seg9_min = 0xffffffff;
                phba->ktime_seg10_total = 0;
                phba->ktime_seg10_max = 0;
                phba->ktime_seg10_min = 0xffffffff;
                return strlen(pbuf);
        }
        return -EINVAL;
}

static int
lpfc_debugfs_nvmeio_trc_open(struct inode *inode, struct file *file)
{
        struct lpfc_hba *phba = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

         /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_NVMEIO_TRC_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_nvmeio_trc_data(phba, debug->buffer,
                LPFC_NVMEIO_TRC_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_nvmeio_trc_write(struct file *file, const char __user *buf,
                              size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        int i;
        unsigned long sz;
        char mybuf[64];
        char *pbuf;

        if (nbytes > 64)
                nbytes = 64;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        if ((strncmp(pbuf, "off", sizeof("off") - 1) == 0)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "0570 nvmeio_trc_off\n");
                phba->nvmeio_trc_output_idx = 0;
                phba->nvmeio_trc_on = 0;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "on", sizeof("on") - 1) == 0)) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "0571 nvmeio_trc_on\n");
                phba->nvmeio_trc_output_idx = 0;
                phba->nvmeio_trc_on = 1;
                return strlen(pbuf);
        }

        /* We must be off to allocate the trace buffer */
        if (phba->nvmeio_trc_on != 0)
                return -EINVAL;

        /* If not on or off, the parameter is the trace buffer size */
        i = kstrtoul(pbuf, 0, &sz);
        if (i)
                return -EINVAL;
        phba->nvmeio_trc_size = (uint32_t)sz;

        /* It must be a power of 2 - round down */
        i = 0;
        while (sz > 1) {
                sz = sz >> 1;
                i++;
        }
        sz = (1 << i);
        if (phba->nvmeio_trc_size != sz)
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "0572 nvmeio_trc_size changed to %ld\n",
                                sz);
        phba->nvmeio_trc_size = (uint32_t)sz;

        /* If one previously exists, free it */
        kfree(phba->nvmeio_trc);

        /* Allocate new trace buffer and initialize */
        phba->nvmeio_trc = kzalloc((sizeof(struct lpfc_debugfs_nvmeio_trc) *
                                    sz), GFP_KERNEL);
        if (!phba->nvmeio_trc) {
                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                "0573 Cannot create debugfs "
                                "nvmeio_trc buffer\n");
                return -ENOMEM;
        }
        atomic_set(&phba->nvmeio_trc_cnt, 0);
        phba->nvmeio_trc_on = 0;
        phba->nvmeio_trc_output_idx = 0;

        return strlen(pbuf);
}

static int
lpfc_debugfs_cpucheck_open(struct inode *inode, struct file *file)
{
        struct lpfc_vport *vport = inode->i_private;
        struct lpfc_debug *debug;
        int rc = -ENOMEM;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                goto out;

         /* Round to page boundary */
        debug->buffer = kmalloc(LPFC_CPUCHECK_SIZE, GFP_KERNEL);
        if (!debug->buffer) {
                kfree(debug);
                goto out;
        }

        debug->len = lpfc_debugfs_cpucheck_data(vport, debug->buffer,
                LPFC_CPUCHECK_SIZE);

        debug->i_private = inode->i_private;
        file->private_data = debug;

        rc = 0;
out:
        return rc;
}

static ssize_t
lpfc_debugfs_cpucheck_write(struct file *file, const char __user *buf,
                            size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_vport *vport = (struct lpfc_vport *)debug->i_private;
        struct lpfc_hba   *phba = vport->phba;
        struct lpfc_sli4_hdw_queue *qp;
        char mybuf[64];
        char *pbuf;
        int i, j;

        if (nbytes > 64)
                nbytes = 64;

        memset(mybuf, 0, sizeof(mybuf));

        if (copy_from_user(mybuf, buf, nbytes))
                return -EFAULT;
        pbuf = &mybuf[0];

        if ((strncmp(pbuf, "on", sizeof("on") - 1) == 0)) {
                if (phba->nvmet_support)
                        phba->cpucheck_on |= LPFC_CHECK_NVMET_IO;
                else
                        phba->cpucheck_on |= (LPFC_CHECK_NVME_IO |
                                LPFC_CHECK_SCSI_IO);
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "nvme_on", sizeof("nvme_on") - 1) == 0)) {
                if (phba->nvmet_support)
                        phba->cpucheck_on |= LPFC_CHECK_NVMET_IO;
                else
                        phba->cpucheck_on |= LPFC_CHECK_NVME_IO;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "scsi_on", sizeof("scsi_on") - 1) == 0)) {
                phba->cpucheck_on |= LPFC_CHECK_SCSI_IO;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "rcv",
                   sizeof("rcv") - 1) == 0)) {
                if (phba->nvmet_support)
                        phba->cpucheck_on |= LPFC_CHECK_NVMET_RCV;
                else
                        return -EINVAL;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "off",
                   sizeof("off") - 1) == 0)) {
                phba->cpucheck_on = LPFC_CHECK_OFF;
                return strlen(pbuf);
        } else if ((strncmp(pbuf, "zero",
                   sizeof("zero") - 1) == 0)) {
                for (i = 0; i < phba->cfg_hdw_queue; i++) {
                        qp = &phba->sli4_hba.hdwq[i];

                        for (j = 0; j < LPFC_CHECK_CPU_CNT; j++) {
                                qp->cpucheck_rcv_io[j] = 0;
                                qp->cpucheck_xmt_io[j] = 0;
                                qp->cpucheck_cmpl_io[j] = 0;
                        }
                }
                return strlen(pbuf);
        }
        return -EINVAL;
}

/*
 * ---------------------------------
 * iDiag debugfs file access methods
 * ---------------------------------
 *
 * All access methods are through the proper SLI4 PCI function's debugfs
 * iDiag directory:
 *
 *     /sys/kernel/debug/lpfc/fn<#>/iDiag
 */

/**
 * lpfc_idiag_cmd_get - Get and parse idiag debugfs comands from user space
 * @buf: The pointer to the user space buffer.
 * @nbytes: The number of bytes in the user space buffer.
 * @idiag_cmd: pointer to the idiag command struct.
 *
 * This routine reads data from debugfs user space buffer and parses the
 * buffer for getting the idiag command and arguments. The while space in
 * between the set of data is used as the parsing separator.
 *
 * This routine returns 0 when successful, it returns proper error code
 * back to the user space in error conditions.
 */
static int lpfc_idiag_cmd_get(const char __user *buf, size_t nbytes,
                              struct lpfc_idiag_cmd *idiag_cmd)
{
        char mybuf[64];
        char *pbuf, *step_str;
        int i;
        size_t bsize;

        memset(mybuf, 0, sizeof(mybuf));
        memset(idiag_cmd, 0, sizeof(*idiag_cmd));
        bsize = min(nbytes, (sizeof(mybuf)-1));

        if (copy_from_user(mybuf, buf, bsize))
                return -EFAULT;
        pbuf = &mybuf[0];
        step_str = strsep(&pbuf, "\t ");

        /* The opcode must present */
        if (!step_str)
                return -EINVAL;

        idiag_cmd->opcode = simple_strtol(step_str, NULL, 0);
        if (idiag_cmd->opcode == 0)
                return -EINVAL;

        for (i = 0; i < LPFC_IDIAG_CMD_DATA_SIZE; i++) {
                step_str = strsep(&pbuf, "\t ");
                if (!step_str)
                        return i;
                idiag_cmd->data[i] = simple_strtol(step_str, NULL, 0);
        }
        return i;
}

/**
 * lpfc_idiag_open - idiag open debugfs
 * @inode: The inode pointer that contains a pointer to phba.
 * @file: The file pointer to attach the file operation.
 *
 * Description:
 * This routine is the entry point for the debugfs open file operation. It
 * gets the reference to phba from the i_private field in @inode, it then
 * allocates buffer for the file operation, performs the necessary PCI config
 * space read into the allocated buffer according to the idiag user command
 * setup, and then returns a pointer to buffer in the private_data field in
 * @file.
 *
 * Returns:
 * This function returns zero if successful. On error it will return an
 * negative error value.
 **/
static int
lpfc_idiag_open(struct inode *inode, struct file *file)
{
        struct lpfc_debug *debug;

        debug = kmalloc(sizeof(*debug), GFP_KERNEL);
        if (!debug)
                return -ENOMEM;

        debug->i_private = inode->i_private;
        debug->buffer = NULL;
        file->private_data = debug;

        return 0;
}

/**
 * lpfc_idiag_release - Release idiag access file operation
 * @inode: The inode pointer that contains a vport pointer. (unused)
 * @file: The file pointer that contains the buffer to release.
 *
 * Description:
 * This routine is the generic release routine for the idiag access file
 * operation, it frees the buffer that was allocated when the debugfs file
 * was opened.
 *
 * Returns:
 * This function returns zero.
 **/
static int
lpfc_idiag_release(struct inode *inode, struct file *file)
{
        struct lpfc_debug *debug = file->private_data;

        /* Free the buffers to the file operation */
        kfree(debug->buffer);
        kfree(debug);

        return 0;
}

/**
 * lpfc_idiag_cmd_release - Release idiag cmd access file operation
 * @inode: The inode pointer that contains a vport pointer. (unused)
 * @file: The file pointer that contains the buffer to release.
 *
 * Description:
 * This routine frees the buffer that was allocated when the debugfs file
 * was opened. It also reset the fields in the idiag command struct in the
 * case of command for write operation.
 *
 * Returns:
 * This function returns zero.
 **/
static int
lpfc_idiag_cmd_release(struct inode *inode, struct file *file)
{
        struct lpfc_debug *debug = file->private_data;

        if (debug->op == LPFC_IDIAG_OP_WR) {
                switch (idiag.cmd.opcode) {
                case LPFC_IDIAG_CMD_PCICFG_WR:
                case LPFC_IDIAG_CMD_PCICFG_ST:
                case LPFC_IDIAG_CMD_PCICFG_CL:
                case LPFC_IDIAG_CMD_QUEACC_WR:
                case LPFC_IDIAG_CMD_QUEACC_ST:
                case LPFC_IDIAG_CMD_QUEACC_CL:
                        memset(&idiag, 0, sizeof(idiag));
                        break;
                default:
                        break;
                }
        }

        /* Free the buffers to the file operation */
        kfree(debug->buffer);
        kfree(debug);

        return 0;
}

/**
 * lpfc_idiag_pcicfg_read - idiag debugfs read pcicfg
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the data to.
 * @nbytes: The number of bytes to read.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine reads data from the @phba pci config space according to the
 * idiag command, and copies to user @buf. Depending on the PCI config space
 * read command setup, it does either a single register read of a byte
 * (8 bits), a word (16 bits), or a dword (32 bits) or browsing through all
 * registers from the 4K extended PCI config space.
 *
 * Returns:
 * This function returns the amount of data that was read (this could be less
 * than @nbytes if the end of the file was reached) or a negative error value.
 **/
static ssize_t
lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes,
                       loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        int offset_label, offset, len = 0, index = LPFC_PCI_CFG_RD_SIZE;
        int where, count;
        char *pbuffer;
        struct pci_dev *pdev;
        uint32_t u32val;
        uint16_t u16val;
        uint8_t u8val;

        pdev = phba->pcidev;
        if (!pdev)
                return 0;

        /* This is a user read operation */
        debug->op = LPFC_IDIAG_OP_RD;

        if (!debug->buffer)
                debug->buffer = kmalloc(LPFC_PCI_CFG_SIZE, GFP_KERNEL);
        if (!debug->buffer)
                return 0;
        pbuffer = debug->buffer;

        if (*ppos)
                return 0;

        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) {
                where = idiag.cmd.data[IDIAG_PCICFG_WHERE_INDX];
                count = idiag.cmd.data[IDIAG_PCICFG_COUNT_INDX];
        } else
                return 0;

        /* Read single PCI config space register */
        switch (count) {
        case SIZE_U8: /* byte (8 bits) */
                pci_read_config_byte(pdev, where, &u8val);
                len += scnprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
                                "%03x: %02x\n", where, u8val);
                break;
        case SIZE_U16: /* word (16 bits) */
                pci_read_config_word(pdev, where, &u16val);
                len += scnprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
                                "%03x: %04x\n", where, u16val);
                break;
        case SIZE_U32: /* double word (32 bits) */
                pci_read_config_dword(pdev, where, &u32val);
                len += scnprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
                                "%03x: %08x\n", where, u32val);
                break;
        case LPFC_PCI_CFG_BROWSE: /* browse all */
                goto pcicfg_browse;
                break;
        default:
                /* illegal count */
                len = 0;
                break;
        }
        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);

pcicfg_browse:

        /* Browse all PCI config space registers */
        offset_label = idiag.offset.last_rd;
        offset = offset_label;

        /* Read PCI config space */
        len += scnprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
                        "%03x: ", offset_label);
        while (index > 0) {
                pci_read_config_dword(pdev, offset, &u32val);
                len += scnprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
                                "%08x ", u32val);
                offset += sizeof(uint32_t);
                if (offset >= LPFC_PCI_CFG_SIZE) {
                        len += scnprintf(pbuffer+len,
                                        LPFC_PCI_CFG_SIZE-len, "\n");
                        break;
                }
                index -= sizeof(uint32_t);
                if (!index)
                        len += scnprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
                                        "\n");
                else if (!(index % (8 * sizeof(uint32_t)))) {
                        offset_label += (8 * sizeof(uint32_t));
                        len += scnprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
                                        "\n%03x: ", offset_label);
                }
        }

        /* Set up the offset for next portion of pci cfg read */
        if (index == 0) {
                idiag.offset.last_rd += LPFC_PCI_CFG_RD_SIZE;
                if (idiag.offset.last_rd >= LPFC_PCI_CFG_SIZE)
                        idiag.offset.last_rd = 0;
        } else
                idiag.offset.last_rd = 0;

        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
}

/**
 * lpfc_idiag_pcicfg_write - Syntax check and set up idiag pcicfg commands
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the user data from.
 * @nbytes: The number of bytes to get.
 * @ppos: The position in the file to start reading from.
 *
 * This routine get the debugfs idiag command struct from user space and
 * then perform the syntax check for PCI config space read or write command
 * accordingly. In the case of PCI config space read command, it sets up
 * the command in the idiag command struct for the debugfs read operation.
 * In the case of PCI config space write operation, it executes the write
 * operation into the PCI config space accordingly.
 *
 * It returns the @nbytges passing in from debugfs user space when successful.
 * In case of error conditions, it returns proper error code back to the user
 * space.
 */
static ssize_t
lpfc_idiag_pcicfg_write(struct file *file, const char __user *buf,
                        size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        uint32_t where, value, count;
        uint32_t u32val;
        uint16_t u16val;
        uint8_t u8val;
        struct pci_dev *pdev;
        int rc;

        pdev = phba->pcidev;
        if (!pdev)
                return -EFAULT;

        /* This is a user write operation */
        debug->op = LPFC_IDIAG_OP_WR;

        rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
        if (rc < 0)
                return rc;

        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) {
                /* Sanity check on PCI config read command line arguments */
                if (rc != LPFC_PCI_CFG_RD_CMD_ARG)
                        goto error_out;
                /* Read command from PCI config space, set up command fields */
                where = idiag.cmd.data[IDIAG_PCICFG_WHERE_INDX];
                count = idiag.cmd.data[IDIAG_PCICFG_COUNT_INDX];
                if (count == LPFC_PCI_CFG_BROWSE) {
                        if (where % sizeof(uint32_t))
                                goto error_out;
                        /* Starting offset to browse */
                        idiag.offset.last_rd = where;
                } else if ((count != sizeof(uint8_t)) &&
                           (count != sizeof(uint16_t)) &&
                           (count != sizeof(uint32_t)))
                        goto error_out;
                if (count == sizeof(uint8_t)) {
                        if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t))
                                goto error_out;
                        if (where % sizeof(uint8_t))
                                goto error_out;
                }
                if (count == sizeof(uint16_t)) {
                        if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t))
                                goto error_out;
                        if (where % sizeof(uint16_t))
                                goto error_out;
                }
                if (count == sizeof(uint32_t)) {
                        if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t))
                                goto error_out;
                        if (where % sizeof(uint32_t))
                                goto error_out;
                }
        } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR ||
                   idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST ||
                   idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
                /* Sanity check on PCI config write command line arguments */
                if (rc != LPFC_PCI_CFG_WR_CMD_ARG)
                        goto error_out;
                /* Write command to PCI config space, read-modify-write */
                where = idiag.cmd.data[IDIAG_PCICFG_WHERE_INDX];
                count = idiag.cmd.data[IDIAG_PCICFG_COUNT_INDX];
                value = idiag.cmd.data[IDIAG_PCICFG_VALUE_INDX];
                /* Sanity checks */
                if ((count != sizeof(uint8_t)) &&
                    (count != sizeof(uint16_t)) &&
                    (count != sizeof(uint32_t)))
                        goto error_out;
                if (count == sizeof(uint8_t)) {
                        if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t))
                                goto error_out;
                        if (where % sizeof(uint8_t))
                                goto error_out;
                        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)
                                pci_write_config_byte(pdev, where,
                                                      (uint8_t)value);
                        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) {
                                rc = pci_read_config_byte(pdev, where, &u8val);
                                if (!rc) {
                                        u8val |= (uint8_t)value;
                                        pci_write_config_byte(pdev, where,
                                                              u8val);
                                }
                        }
                        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
                                rc = pci_read_config_byte(pdev, where, &u8val);
                                if (!rc) {
                                        u8val &= (uint8_t)(~value);
                                        pci_write_config_byte(pdev, where,
                                                              u8val);
                                }
                        }
                }
                if (count == sizeof(uint16_t)) {
                        if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t))
                                goto error_out;
                        if (where % sizeof(uint16_t))
                                goto error_out;
                        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)
                                pci_write_config_word(pdev, where,
                                                      (uint16_t)value);
                        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) {
                                rc = pci_read_config_word(pdev, where, &u16val);
                                if (!rc) {
                                        u16val |= (uint16_t)value;
                                        pci_write_config_word(pdev, where,
                                                              u16val);
                                }
                        }
                        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
                                rc = pci_read_config_word(pdev, where, &u16val);
                                if (!rc) {
                                        u16val &= (uint16_t)(~value);
                                        pci_write_config_word(pdev, where,
                                                              u16val);
                                }
                        }
                }
                if (count == sizeof(uint32_t)) {
                        if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t))
                                goto error_out;
                        if (where % sizeof(uint32_t))
                                goto error_out;
                        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)
                                pci_write_config_dword(pdev, where, value);
                        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) {
                                rc = pci_read_config_dword(pdev, where,
                                                           &u32val);
                                if (!rc) {
                                        u32val |= value;
                                        pci_write_config_dword(pdev, where,
                                                               u32val);
                                }
                        }
                        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
                                rc = pci_read_config_dword(pdev, where,
                                                           &u32val);
                                if (!rc) {
                                        u32val &= ~value;
                                        pci_write_config_dword(pdev, where,
                                                               u32val);
                                }
                        }
                }
        } else
                /* All other opecodes are illegal for now */
                goto error_out;

        return nbytes;
error_out:
        memset(&idiag, 0, sizeof(idiag));
        return -EINVAL;
}

/**
 * lpfc_idiag_baracc_read - idiag debugfs pci bar access read
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the data to.
 * @nbytes: The number of bytes to read.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine reads data from the @phba pci bar memory mapped space
 * according to the idiag command, and copies to user @buf.
 *
 * Returns:
 * This function returns the amount of data that was read (this could be less
 * than @nbytes if the end of the file was reached) or a negative error value.
 **/
static ssize_t
lpfc_idiag_baracc_read(struct file *file, char __user *buf, size_t nbytes,
                       loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        int offset_label, offset, offset_run, len = 0, index;
        int bar_num, acc_range, bar_size;
        char *pbuffer;
        void __iomem *mem_mapped_bar;
        uint32_t if_type;
        struct pci_dev *pdev;
        uint32_t u32val;

        pdev = phba->pcidev;
        if (!pdev)
                return 0;

        /* This is a user read operation */
        debug->op = LPFC_IDIAG_OP_RD;

        if (!debug->buffer)
                debug->buffer = kmalloc(LPFC_PCI_BAR_RD_BUF_SIZE, GFP_KERNEL);
        if (!debug->buffer)
                return 0;
        pbuffer = debug->buffer;

        if (*ppos)
                return 0;

        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_RD) {
                bar_num   = idiag.cmd.data[IDIAG_BARACC_BAR_NUM_INDX];
                offset    = idiag.cmd.data[IDIAG_BARACC_OFF_SET_INDX];
                acc_range = idiag.cmd.data[IDIAG_BARACC_ACC_MOD_INDX];
                bar_size = idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX];
        } else
                return 0;

        if (acc_range == 0)
                return 0;

        if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
        if (if_type == LPFC_SLI_INTF_IF_TYPE_0) {
                if (bar_num == IDIAG_BARACC_BAR_0)
                        mem_mapped_bar = phba->sli4_hba.conf_regs_memmap_p;
                else if (bar_num == IDIAG_BARACC_BAR_1)
                        mem_mapped_bar = phba->sli4_hba.ctrl_regs_memmap_p;
                else if (bar_num == IDIAG_BARACC_BAR_2)
                        mem_mapped_bar = phba->sli4_hba.drbl_regs_memmap_p;
                else
                        return 0;
        } else if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
                if (bar_num == IDIAG_BARACC_BAR_0)
                        mem_mapped_bar = phba->sli4_hba.conf_regs_memmap_p;
                else
                        return 0;
        } else
                return 0;

        /* Read single PCI bar space register */
        if (acc_range == SINGLE_WORD) {
                offset_run = offset;
                u32val = readl(mem_mapped_bar + offset_run);
                len += scnprintf(pbuffer+len, LPFC_PCI_BAR_RD_BUF_SIZE-len,
                                "%05x: %08x\n", offset_run, u32val);
        } else
                goto baracc_browse;

        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);

baracc_browse:

        /* Browse all PCI bar space registers */
        offset_label = idiag.offset.last_rd;
        offset_run = offset_label;

        /* Read PCI bar memory mapped space */
        len += scnprintf(pbuffer+len, LPFC_PCI_BAR_RD_BUF_SIZE-len,
                        "%05x: ", offset_label);
        index = LPFC_PCI_BAR_RD_SIZE;
        while (index > 0) {
                u32val = readl(mem_mapped_bar + offset_run);
                len += scnprintf(pbuffer+len, LPFC_PCI_BAR_RD_BUF_SIZE-len,
                                "%08x ", u32val);
                offset_run += sizeof(uint32_t);
                if (acc_range == LPFC_PCI_BAR_BROWSE) {
                        if (offset_run >= bar_size) {
                                len += scnprintf(pbuffer+len,
                                        LPFC_PCI_BAR_RD_BUF_SIZE-len, "\n");
                                break;
                        }
                } else {
                        if (offset_run >= offset +
                            (acc_range * sizeof(uint32_t))) {
                                len += scnprintf(pbuffer+len,
                                        LPFC_PCI_BAR_RD_BUF_SIZE-len, "\n");
                                break;
                        }
                }
                index -= sizeof(uint32_t);
                if (!index)
                        len += scnprintf(pbuffer+len,
                                        LPFC_PCI_BAR_RD_BUF_SIZE-len, "\n");
                else if (!(index % (8 * sizeof(uint32_t)))) {
                        offset_label += (8 * sizeof(uint32_t));
                        len += scnprintf(pbuffer+len,
                                        LPFC_PCI_BAR_RD_BUF_SIZE-len,
                                        "\n%05x: ", offset_label);
                }
        }

        /* Set up the offset for next portion of pci bar read */
        if (index == 0) {
                idiag.offset.last_rd += LPFC_PCI_BAR_RD_SIZE;
                if (acc_range == LPFC_PCI_BAR_BROWSE) {
                        if (idiag.offset.last_rd >= bar_size)
                                idiag.offset.last_rd = 0;
                } else {
                        if (offset_run >= offset +
                            (acc_range * sizeof(uint32_t)))
                                idiag.offset.last_rd = offset;
                }
        } else {
                if (acc_range == LPFC_PCI_BAR_BROWSE)
                        idiag.offset.last_rd = 0;
                else
                        idiag.offset.last_rd = offset;
        }

        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
}

/**
 * lpfc_idiag_baracc_write - Syntax check and set up idiag bar access commands
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the user data from.
 * @nbytes: The number of bytes to get.
 * @ppos: The position in the file to start reading from.
 *
 * This routine get the debugfs idiag command struct from user space and
 * then perform the syntax check for PCI bar memory mapped space read or
 * write command accordingly. In the case of PCI bar memory mapped space
 * read command, it sets up the command in the idiag command struct for
 * the debugfs read operation. In the case of PCI bar memorpy mapped space
 * write operation, it executes the write operation into the PCI bar memory
 * mapped space accordingly.
 *
 * It returns the @nbytges passing in from debugfs user space when successful.
 * In case of error conditions, it returns proper error code back to the user
 * space.
 */
static ssize_t
lpfc_idiag_baracc_write(struct file *file, const char __user *buf,
                        size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        uint32_t bar_num, bar_size, offset, value, acc_range;
        struct pci_dev *pdev;
        void __iomem *mem_mapped_bar;
        uint32_t if_type;
        uint32_t u32val;
        int rc;

        pdev = phba->pcidev;
        if (!pdev)
                return -EFAULT;

        /* This is a user write operation */
        debug->op = LPFC_IDIAG_OP_WR;

        rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
        if (rc < 0)
                return rc;

        if_type = bf_get(lpfc_sli_intf_if_type, &phba->sli4_hba.sli_intf);
        bar_num = idiag.cmd.data[IDIAG_BARACC_BAR_NUM_INDX];

        if (if_type == LPFC_SLI_INTF_IF_TYPE_0) {
                if ((bar_num != IDIAG_BARACC_BAR_0) &&
                    (bar_num != IDIAG_BARACC_BAR_1) &&
                    (bar_num != IDIAG_BARACC_BAR_2))
                        goto error_out;
        } else if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
                if (bar_num != IDIAG_BARACC_BAR_0)
                        goto error_out;
        } else
                goto error_out;

        if (if_type == LPFC_SLI_INTF_IF_TYPE_0) {
                if (bar_num == IDIAG_BARACC_BAR_0) {
                        idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX] =
                                LPFC_PCI_IF0_BAR0_SIZE;
                        mem_mapped_bar = phba->sli4_hba.conf_regs_memmap_p;
                } else if (bar_num == IDIAG_BARACC_BAR_1) {
                        idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX] =
                                LPFC_PCI_IF0_BAR1_SIZE;
                        mem_mapped_bar = phba->sli4_hba.ctrl_regs_memmap_p;
                } else if (bar_num == IDIAG_BARACC_BAR_2) {
                        idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX] =
                                LPFC_PCI_IF0_BAR2_SIZE;
                        mem_mapped_bar = phba->sli4_hba.drbl_regs_memmap_p;
                } else
                        goto error_out;
        } else if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
                if (bar_num == IDIAG_BARACC_BAR_0) {
                        idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX] =
                                LPFC_PCI_IF2_BAR0_SIZE;
                        mem_mapped_bar = phba->sli4_hba.conf_regs_memmap_p;
                } else
                        goto error_out;
        } else
                goto error_out;

        offset = idiag.cmd.data[IDIAG_BARACC_OFF_SET_INDX];
        if (offset % sizeof(uint32_t))
                goto error_out;

        bar_size = idiag.cmd.data[IDIAG_BARACC_BAR_SZE_INDX];
        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_RD) {
                /* Sanity check on PCI config read command line arguments */
                if (rc != LPFC_PCI_BAR_RD_CMD_ARG)
                        goto error_out;
                acc_range = idiag.cmd.data[IDIAG_BARACC_ACC_MOD_INDX];
                if (acc_range == LPFC_PCI_BAR_BROWSE) {
                        if (offset > bar_size - sizeof(uint32_t))
                                goto error_out;
                        /* Starting offset to browse */
                        idiag.offset.last_rd = offset;
                } else if (acc_range > SINGLE_WORD) {
                        if (offset + acc_range * sizeof(uint32_t) > bar_size)
                                goto error_out;
                        /* Starting offset to browse */
                        idiag.offset.last_rd = offset;
                } else if (acc_range != SINGLE_WORD)
                        goto error_out;
        } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_WR ||
                   idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_ST ||
                   idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_CL) {
                /* Sanity check on PCI bar write command line arguments */
                if (rc != LPFC_PCI_BAR_WR_CMD_ARG)
                        goto error_out;
                /* Write command to PCI bar space, read-modify-write */
                acc_range = SINGLE_WORD;
                value = idiag.cmd.data[IDIAG_BARACC_REG_VAL_INDX];
                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_WR) {
                        writel(value, mem_mapped_bar + offset);
                        readl(mem_mapped_bar + offset);
                }
                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_ST) {
                        u32val = readl(mem_mapped_bar + offset);
                        u32val |= value;
                        writel(u32val, mem_mapped_bar + offset);
                        readl(mem_mapped_bar + offset);
                }
                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_BARACC_CL) {
                        u32val = readl(mem_mapped_bar + offset);
                        u32val &= ~value;
                        writel(u32val, mem_mapped_bar + offset);
                        readl(mem_mapped_bar + offset);
                }
        } else
                /* All other opecodes are illegal for now */
                goto error_out;

        return nbytes;
error_out:
        memset(&idiag, 0, sizeof(idiag));
        return -EINVAL;
}

static int
__lpfc_idiag_print_wq(struct lpfc_queue *qp, char *wqtype,
                        char *pbuffer, int len)
{
        if (!qp)
                return len;

        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "\t\t%s WQ info: ", wqtype);
        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "AssocCQID[%04d]: WQ-STAT[oflow:x%x posted:x%llx]\n",
                        qp->assoc_qid, qp->q_cnt_1,
                        (unsigned long long)qp->q_cnt_4);
        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "\t\tWQID[%02d], QE-CNT[%04d], QE-SZ[%04d], "
                        "HST-IDX[%04d], PRT-IDX[%04d], NTFI[%03d]",
                        qp->queue_id, qp->entry_count,
                        qp->entry_size, qp->host_index,
                        qp->hba_index, qp->notify_interval);
        len +=  scnprintf(pbuffer + len,
                        LPFC_QUE_INFO_GET_BUF_SIZE - len, "\n");
        return len;
}

static int
lpfc_idiag_wqs_for_cq(struct lpfc_hba *phba, char *wqtype, char *pbuffer,
                int *len, int max_cnt, int cq_id)
{
        struct lpfc_queue *qp;
        int qidx;

        for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) {
                qp = phba->sli4_hba.hdwq[qidx].io_wq;
                if (qp->assoc_qid != cq_id)
                        continue;
                *len = __lpfc_idiag_print_wq(qp, wqtype, pbuffer, *len);
                if (*len >= max_cnt)
                        return 1;
        }
        return 0;
}

static int
__lpfc_idiag_print_cq(struct lpfc_queue *qp, char *cqtype,
                        char *pbuffer, int len)
{
        if (!qp)
                return len;

        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "\t%s CQ info: ", cqtype);
        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "AssocEQID[%02d]: CQ STAT[max:x%x relw:x%x "
                        "xabt:x%x wq:x%llx]\n",
                        qp->assoc_qid, qp->q_cnt_1, qp->q_cnt_2,
                        qp->q_cnt_3, (unsigned long long)qp->q_cnt_4);
        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "\tCQID[%02d], QE-CNT[%04d], QE-SZ[%04d], "
                        "HST-IDX[%04d], NTFI[%03d], PLMT[%03d]",
                        qp->queue_id, qp->entry_count,
                        qp->entry_size, qp->host_index,
                        qp->notify_interval, qp->max_proc_limit);

        len +=  scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "\n");

        return len;
}

static int
__lpfc_idiag_print_rqpair(struct lpfc_queue *qp, struct lpfc_queue *datqp,
                        char *rqtype, char *pbuffer, int len)
{
        if (!qp || !datqp)
                return len;

        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "\t\t%s RQ info: ", rqtype);
        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "AssocCQID[%02d]: RQ-STAT[nopost:x%x nobuf:x%x "
                        "posted:x%x rcv:x%llx]\n",
                        qp->assoc_qid, qp->q_cnt_1, qp->q_cnt_2,
                        qp->q_cnt_3, (unsigned long long)qp->q_cnt_4);
        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "\t\tHQID[%02d], QE-CNT[%04d], QE-SZ[%04d], "
                        "HST-IDX[%04d], PRT-IDX[%04d], NTFI[%03d]\n",
                        qp->queue_id, qp->entry_count, qp->entry_size,
                        qp->host_index, qp->hba_index, qp->notify_interval);
        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "\t\tDQID[%02d], QE-CNT[%04d], QE-SZ[%04d], "
                        "HST-IDX[%04d], PRT-IDX[%04d], NTFI[%03d]\n",
                        datqp->queue_id, datqp->entry_count,
                        datqp->entry_size, datqp->host_index,
                        datqp->hba_index, datqp->notify_interval);
        return len;
}

static int
lpfc_idiag_cqs_for_eq(struct lpfc_hba *phba, char *pbuffer,
                int *len, int max_cnt, int eqidx, int eq_id)
{
        struct lpfc_queue *qp;
        int rc;

        qp = phba->sli4_hba.hdwq[eqidx].io_cq;

        *len = __lpfc_idiag_print_cq(qp, "IO", pbuffer, *len);

        /* Reset max counter */
        qp->CQ_max_cqe = 0;

        if (*len >= max_cnt)
                return 1;

        rc = lpfc_idiag_wqs_for_cq(phba, "IO", pbuffer, len,
                                   max_cnt, qp->queue_id);
        if (rc)
                return 1;

        if ((eqidx < phba->cfg_nvmet_mrq) && phba->nvmet_support) {
                /* NVMET CQset */
                qp = phba->sli4_hba.nvmet_cqset[eqidx];
                *len = __lpfc_idiag_print_cq(qp, "NVMET CQset", pbuffer, *len);

                /* Reset max counter */
                qp->CQ_max_cqe = 0;

                if (*len >= max_cnt)
                        return 1;

                /* RQ header */
                qp = phba->sli4_hba.nvmet_mrq_hdr[eqidx];
                *len = __lpfc_idiag_print_rqpair(qp,
                                phba->sli4_hba.nvmet_mrq_data[eqidx],
                                "NVMET MRQ", pbuffer, *len);

                if (*len >= max_cnt)
                        return 1;
        }

        return 0;
}

static int
__lpfc_idiag_print_eq(struct lpfc_queue *qp, char *eqtype,
                        char *pbuffer, int len)
{
        if (!qp)
                return len;

        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "\n%s EQ info: EQ-STAT[max:x%x noE:x%x "
                        "cqe_proc:x%x eqe_proc:x%llx eqd %d]\n",
                        eqtype, qp->q_cnt_1, qp->q_cnt_2, qp->q_cnt_3,
                        (unsigned long long)qp->q_cnt_4, qp->q_mode);
        len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "EQID[%02d], QE-CNT[%04d], QE-SZ[%04d], "
                        "HST-IDX[%04d], NTFI[%03d], PLMT[%03d], AFFIN[%03d]",
                        qp->queue_id, qp->entry_count, qp->entry_size,
                        qp->host_index, qp->notify_interval,
                        qp->max_proc_limit, qp->chann);
        len +=  scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len,
                        "\n");

        return len;
}

/**
 * lpfc_idiag_queinfo_read - idiag debugfs read queue information
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the data to.
 * @nbytes: The number of bytes to read.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine reads data from the @phba SLI4 PCI function queue information,
 * and copies to user @buf.
 * This routine only returns 1 EQs worth of information. It remembers the last
 * EQ read and jumps to the next EQ. Thus subsequent calls to queInfo will
 * retrieve all EQs allocated for the phba.
 *
 * Returns:
 * This function returns the amount of data that was read (this could be less
 * than @nbytes if the end of the file was reached) or a negative error value.
 **/
static ssize_t
lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,
                        loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        char *pbuffer;
        int max_cnt, rc, x, len = 0;
        struct lpfc_queue *qp = NULL;

        if (!debug->buffer)
                debug->buffer = kmalloc(LPFC_QUE_INFO_GET_BUF_SIZE, GFP_KERNEL);
        if (!debug->buffer)
                return 0;
        pbuffer = debug->buffer;
        max_cnt = LPFC_QUE_INFO_GET_BUF_SIZE - 256;

        if (*ppos)
                return 0;

        spin_lock_irq(&phba->hbalock);

        /* Fast-path event queue */
        if (phba->sli4_hba.hdwq && phba->cfg_hdw_queue) {

                x = phba->lpfc_idiag_last_eq;
                phba->lpfc_idiag_last_eq++;
                if (phba->lpfc_idiag_last_eq >= phba->cfg_hdw_queue)
                        phba->lpfc_idiag_last_eq = 0;

                len += scnprintf(pbuffer + len,
                                 LPFC_QUE_INFO_GET_BUF_SIZE - len,
                                 "HDWQ %d out of %d HBA HDWQs\n",
                                 x, phba->cfg_hdw_queue);

                /* Fast-path EQ */
                qp = phba->sli4_hba.hdwq[x].hba_eq;
                if (!qp)
                        goto out;

                len = __lpfc_idiag_print_eq(qp, "HBA", pbuffer, len);

                /* Reset max counter */
                qp->EQ_max_eqe = 0;

                if (len >= max_cnt)
                        goto too_big;

                /* will dump both fcp and nvme cqs/wqs for the eq */
                rc = lpfc_idiag_cqs_for_eq(phba, pbuffer, &len,
                        max_cnt, x, qp->queue_id);
                if (rc)
                        goto too_big;

                /* Only EQ 0 has slow path CQs configured */
                if (x)
                        goto out;

                /* Slow-path mailbox CQ */
                qp = phba->sli4_hba.mbx_cq;
                len = __lpfc_idiag_print_cq(qp, "MBX", pbuffer, len);
                if (len >= max_cnt)
                        goto too_big;

                /* Slow-path MBOX MQ */
                qp = phba->sli4_hba.mbx_wq;
                len = __lpfc_idiag_print_wq(qp, "MBX", pbuffer, len);
                if (len >= max_cnt)
                        goto too_big;

                /* Slow-path ELS response CQ */
                qp = phba->sli4_hba.els_cq;
                len = __lpfc_idiag_print_cq(qp, "ELS", pbuffer, len);
                /* Reset max counter */
                if (qp)
                        qp->CQ_max_cqe = 0;
                if (len >= max_cnt)
                        goto too_big;

                /* Slow-path ELS WQ */
                qp = phba->sli4_hba.els_wq;
                len = __lpfc_idiag_print_wq(qp, "ELS", pbuffer, len);
                if (len >= max_cnt)
                        goto too_big;

                qp = phba->sli4_hba.hdr_rq;
                len = __lpfc_idiag_print_rqpair(qp, phba->sli4_hba.dat_rq,
                                                "ELS RQpair", pbuffer, len);
                if (len >= max_cnt)
                        goto too_big;

                /* Slow-path NVME LS response CQ */
                qp = phba->sli4_hba.nvmels_cq;
                len = __lpfc_idiag_print_cq(qp, "NVME LS",
                                                pbuffer, len);
                /* Reset max counter */
                if (qp)
                        qp->CQ_max_cqe = 0;
                if (len >= max_cnt)
                        goto too_big;

                /* Slow-path NVME LS WQ */
                qp = phba->sli4_hba.nvmels_wq;
                len = __lpfc_idiag_print_wq(qp, "NVME LS",
                                                pbuffer, len);
                if (len >= max_cnt)
                        goto too_big;

                goto out;
        }

        spin_unlock_irq(&phba->hbalock);
        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);

too_big:
        len +=  scnprintf(pbuffer + len,
                LPFC_QUE_INFO_GET_BUF_SIZE - len, "Truncated ...\n");
out:
        spin_unlock_irq(&phba->hbalock);
        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
}

/**
 * lpfc_idiag_que_param_check - queue access command parameter sanity check
 * @q: The pointer to queue structure.
 * @index: The index into a queue entry.
 * @count: The number of queue entries to access.
 *
 * Description:
 * The routine performs sanity check on device queue access method commands.
 *
 * Returns:
 * This function returns -EINVAL when fails the sanity check, otherwise, it
 * returns 0.
 **/
static int
lpfc_idiag_que_param_check(struct lpfc_queue *q, int index, int count)
{
        /* Only support single entry read or browsing */
        if ((count != 1) && (count != LPFC_QUE_ACC_BROWSE))
                return -EINVAL;
        if (index > q->entry_count - 1)
                return -EINVAL;
        return 0;
}

/**
 * lpfc_idiag_queacc_read_qe - read a single entry from the given queue index
 * @pbuffer: The pointer to buffer to copy the read data into.
 * @pque: The pointer to the queue to be read.
 * @index: The index into the queue entry.
 *
 * Description:
 * This routine reads out a single entry from the given queue's index location
 * and copies it into the buffer provided.
 *
 * Returns:
 * This function returns 0 when it fails, otherwise, it returns the length of
 * the data read into the buffer provided.
 **/
static int
lpfc_idiag_queacc_read_qe(char *pbuffer, int len, struct lpfc_queue *pque,
                          uint32_t index)
{
        int offset, esize;
        uint32_t *pentry;

        if (!pbuffer || !pque)
                return 0;

        esize = pque->entry_size;
        len += scnprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len,
                        "QE-INDEX[%04d]:\n", index);

        offset = 0;
        pentry = lpfc_sli4_qe(pque, index);
        while (esize > 0) {
                len += scnprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len,
                                "%08x ", *pentry);
                pentry++;
                offset += sizeof(uint32_t);
                esize -= sizeof(uint32_t);
                if (esize > 0 && !(offset % (4 * sizeof(uint32_t))))
                        len += scnprintf(pbuffer+len,
                                        LPFC_QUE_ACC_BUF_SIZE-len, "\n");
        }
        len += scnprintf(pbuffer+len, LPFC_QUE_ACC_BUF_SIZE-len, "\n");

        return len;
}

/**
 * lpfc_idiag_queacc_read - idiag debugfs read port queue
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the data to.
 * @nbytes: The number of bytes to read.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine reads data from the @phba device queue memory according to the
 * idiag command, and copies to user @buf. Depending on the queue dump read
 * command setup, it does either a single queue entry read or browing through
 * all entries of the queue.
 *
 * Returns:
 * This function returns the amount of data that was read (this could be less
 * than @nbytes if the end of the file was reached) or a negative error value.
 **/
static ssize_t
lpfc_idiag_queacc_read(struct file *file, char __user *buf, size_t nbytes,
                       loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        uint32_t last_index, index, count;
        struct lpfc_queue *pque = NULL;
        char *pbuffer;
        int len = 0;

        /* This is a user read operation */
        debug->op = LPFC_IDIAG_OP_RD;

        if (!debug->buffer)
                debug->buffer = kmalloc(LPFC_QUE_ACC_BUF_SIZE, GFP_KERNEL);
        if (!debug->buffer)
                return 0;
        pbuffer = debug->buffer;

        if (*ppos)
                return 0;

        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
                index = idiag.cmd.data[IDIAG_QUEACC_INDEX_INDX];
                count = idiag.cmd.data[IDIAG_QUEACC_COUNT_INDX];
                pque = (struct lpfc_queue *)idiag.ptr_private;
        } else
                return 0;

        /* Browse the queue starting from index */
        if (count == LPFC_QUE_ACC_BROWSE)
                goto que_browse;

        /* Read a single entry from the queue */
        len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index);

        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);

que_browse:

        /* Browse all entries from the queue */
        last_index = idiag.offset.last_rd;
        index = last_index;

        while (len < LPFC_QUE_ACC_SIZE - pque->entry_size) {
                len = lpfc_idiag_queacc_read_qe(pbuffer, len, pque, index);
                index++;
                if (index > pque->entry_count - 1)
                        break;
        }

        /* Set up the offset for next portion of pci cfg read */
        if (index > pque->entry_count - 1)
                index = 0;
        idiag.offset.last_rd = index;

        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
}

/**
 * lpfc_idiag_queacc_write - Syntax check and set up idiag queacc commands
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the user data from.
 * @nbytes: The number of bytes to get.
 * @ppos: The position in the file to start reading from.
 *
 * This routine get the debugfs idiag command struct from user space and then
 * perform the syntax check for port queue read (dump) or write (set) command
 * accordingly. In the case of port queue read command, it sets up the command
 * in the idiag command struct for the following debugfs read operation. In
 * the case of port queue write operation, it executes the write operation
 * into the port queue entry accordingly.
 *
 * It returns the @nbytges passing in from debugfs user space when successful.
 * In case of error conditions, it returns proper error code back to the user
 * space.
 **/
static ssize_t
lpfc_idiag_queacc_write(struct file *file, const char __user *buf,
                        size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        uint32_t qidx, quetp, queid, index, count, offset, value;
        uint32_t *pentry;
        struct lpfc_queue *pque, *qp;
        int rc;

        /* This is a user write operation */
        debug->op = LPFC_IDIAG_OP_WR;

        rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
        if (rc < 0)
                return rc;

        /* Get and sanity check on command feilds */
        quetp  = idiag.cmd.data[IDIAG_QUEACC_QUETP_INDX];
        queid  = idiag.cmd.data[IDIAG_QUEACC_QUEID_INDX];
        index  = idiag.cmd.data[IDIAG_QUEACC_INDEX_INDX];
        count  = idiag.cmd.data[IDIAG_QUEACC_COUNT_INDX];
        offset = idiag.cmd.data[IDIAG_QUEACC_OFFST_INDX];
        value  = idiag.cmd.data[IDIAG_QUEACC_VALUE_INDX];

        /* Sanity check on command line arguments */
        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) {
                if (rc != LPFC_QUE_ACC_WR_CMD_ARG)
                        goto error_out;
                if (count != 1)
                        goto error_out;
        } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
                if (rc != LPFC_QUE_ACC_RD_CMD_ARG)
                        goto error_out;
        } else
                goto error_out;

        switch (quetp) {
        case LPFC_IDIAG_EQ:
                /* HBA event queue */
                if (phba->sli4_hba.hdwq) {
                        for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) {
                                qp = phba->sli4_hba.hdwq[qidx].hba_eq;
                                if (qp && qp->queue_id == queid) {
                                        /* Sanity check */
                                        rc = lpfc_idiag_que_param_check(qp,
                                                index, count);
                                        if (rc)
                                                goto error_out;
                                        idiag.ptr_private = qp;
                                        goto pass_check;
                                }
                        }
                }
                goto error_out;
                break;
        case LPFC_IDIAG_CQ:
                /* MBX complete queue */
                if (phba->sli4_hba.mbx_cq &&
                    phba->sli4_hba.mbx_cq->queue_id == queid) {
                        /* Sanity check */
                        rc = lpfc_idiag_que_param_check(
                                        phba->sli4_hba.mbx_cq, index, count);
                        if (rc)
                                goto error_out;
                        idiag.ptr_private = phba->sli4_hba.mbx_cq;
                        goto pass_check;
                }
                /* ELS complete queue */
                if (phba->sli4_hba.els_cq &&
                    phba->sli4_hba.els_cq->queue_id == queid) {
                        /* Sanity check */
                        rc = lpfc_idiag_que_param_check(
                                        phba->sli4_hba.els_cq, index, count);
                        if (rc)
                                goto error_out;
                        idiag.ptr_private = phba->sli4_hba.els_cq;
                        goto pass_check;
                }
                /* NVME LS complete queue */
                if (phba->sli4_hba.nvmels_cq &&
                    phba->sli4_hba.nvmels_cq->queue_id == queid) {
                        /* Sanity check */
                        rc = lpfc_idiag_que_param_check(
                                        phba->sli4_hba.nvmels_cq, index, count);
                        if (rc)
                                goto error_out;
                        idiag.ptr_private = phba->sli4_hba.nvmels_cq;
                        goto pass_check;
                }
                /* FCP complete queue */
                if (phba->sli4_hba.hdwq) {
                        for (qidx = 0; qidx < phba->cfg_hdw_queue;
                                                                qidx++) {
                                qp = phba->sli4_hba.hdwq[qidx].io_cq;
                                if (qp && qp->queue_id == queid) {
                                        /* Sanity check */
                                        rc = lpfc_idiag_que_param_check(
                                                qp, index, count);
                                        if (rc)
                                                goto error_out;
                                        idiag.ptr_private = qp;
                                        goto pass_check;
                                }
                        }
                }
                goto error_out;
                break;
        case LPFC_IDIAG_MQ:
                /* MBX work queue */
                if (phba->sli4_hba.mbx_wq &&
                    phba->sli4_hba.mbx_wq->queue_id == queid) {
                        /* Sanity check */
                        rc = lpfc_idiag_que_param_check(
                                        phba->sli4_hba.mbx_wq, index, count);
                        if (rc)
                                goto error_out;
                        idiag.ptr_private = phba->sli4_hba.mbx_wq;
                        goto pass_check;
                }
                goto error_out;
                break;
        case LPFC_IDIAG_WQ:
                /* ELS work queue */
                if (phba->sli4_hba.els_wq &&
                    phba->sli4_hba.els_wq->queue_id == queid) {
                        /* Sanity check */
                        rc = lpfc_idiag_que_param_check(
                                        phba->sli4_hba.els_wq, index, count);
                        if (rc)
                                goto error_out;
                        idiag.ptr_private = phba->sli4_hba.els_wq;
                        goto pass_check;
                }
                /* NVME LS work queue */
                if (phba->sli4_hba.nvmels_wq &&
                    phba->sli4_hba.nvmels_wq->queue_id == queid) {
                        /* Sanity check */
                        rc = lpfc_idiag_que_param_check(
                                        phba->sli4_hba.nvmels_wq, index, count);
                        if (rc)
                                goto error_out;
                        idiag.ptr_private = phba->sli4_hba.nvmels_wq;
                        goto pass_check;
                }

                if (phba->sli4_hba.hdwq) {
                        /* FCP/SCSI work queue */
                        for (qidx = 0; qidx < phba->cfg_hdw_queue; qidx++) {
                                qp = phba->sli4_hba.hdwq[qidx].io_wq;
                                if (qp && qp->queue_id == queid) {
                                        /* Sanity check */
                                        rc = lpfc_idiag_que_param_check(
                                                qp, index, count);
                                        if (rc)
                                                goto error_out;
                                        idiag.ptr_private = qp;
                                        goto pass_check;
                                }
                        }
                }

                goto error_out;
                break;
        case LPFC_IDIAG_RQ:
                /* HDR queue */
                if (phba->sli4_hba.hdr_rq &&
                    phba->sli4_hba.hdr_rq->queue_id == queid) {
                        /* Sanity check */
                        rc = lpfc_idiag_que_param_check(
                                        phba->sli4_hba.hdr_rq, index, count);
                        if (rc)
                                goto error_out;
                        idiag.ptr_private = phba->sli4_hba.hdr_rq;
                        goto pass_check;
                }
                /* DAT queue */
                if (phba->sli4_hba.dat_rq &&
                    phba->sli4_hba.dat_rq->queue_id == queid) {
                        /* Sanity check */
                        rc = lpfc_idiag_que_param_check(
                                        phba->sli4_hba.dat_rq, index, count);
                        if (rc)
                                goto error_out;
                        idiag.ptr_private = phba->sli4_hba.dat_rq;
                        goto pass_check;
                }
                goto error_out;
                break;
        default:
                goto error_out;
                break;
        }

pass_check:

        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_RD) {
                if (count == LPFC_QUE_ACC_BROWSE)
                        idiag.offset.last_rd = index;
        }

        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL) {
                /* Additional sanity checks on write operation */
                pque = (struct lpfc_queue *)idiag.ptr_private;
                if (offset > pque->entry_size/sizeof(uint32_t) - 1)
                        goto error_out;
                pentry = lpfc_sli4_qe(pque, index);
                pentry += offset;
                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_WR)
                        *pentry = value;
                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_ST)
                        *pentry |= value;
                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_QUEACC_CL)
                        *pentry &= ~value;
        }
        return nbytes;

error_out:
        /* Clean out command structure on command error out */
        memset(&idiag, 0, sizeof(idiag));
        return -EINVAL;
}

/**
 * lpfc_idiag_drbacc_read_reg - idiag debugfs read a doorbell register
 * @phba: The pointer to hba structure.
 * @pbuffer: The pointer to the buffer to copy the data to.
 * @len: The length of bytes to copied.
 * @drbregid: The id to doorbell registers.
 *
 * Description:
 * This routine reads a doorbell register and copies its content to the
 * user buffer pointed to by @pbuffer.
 *
 * Returns:
 * This function returns the amount of data that was copied into @pbuffer.
 **/
static int
lpfc_idiag_drbacc_read_reg(struct lpfc_hba *phba, char *pbuffer,
                           int len, uint32_t drbregid)
{

        if (!pbuffer)
                return 0;

        switch (drbregid) {
        case LPFC_DRB_EQ:
                len += scnprintf(pbuffer + len, LPFC_DRB_ACC_BUF_SIZE-len,
                                "EQ-DRB-REG: 0x%08x\n",
                                readl(phba->sli4_hba.EQDBregaddr));
                break;
        case LPFC_DRB_CQ:
                len += scnprintf(pbuffer + len, LPFC_DRB_ACC_BUF_SIZE - len,
                                "CQ-DRB-REG: 0x%08x\n",
                                readl(phba->sli4_hba.CQDBregaddr));
                break;
        case LPFC_DRB_MQ:
                len += scnprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
                                "MQ-DRB-REG:   0x%08x\n",
                                readl(phba->sli4_hba.MQDBregaddr));
                break;
        case LPFC_DRB_WQ:
                len += scnprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
                                "WQ-DRB-REG:   0x%08x\n",
                                readl(phba->sli4_hba.WQDBregaddr));
                break;
        case LPFC_DRB_RQ:
                len += scnprintf(pbuffer+len, LPFC_DRB_ACC_BUF_SIZE-len,
                                "RQ-DRB-REG:   0x%08x\n",
                                readl(phba->sli4_hba.RQDBregaddr));
                break;
        default:
                break;
        }

        return len;
}

/**
 * lpfc_idiag_drbacc_read - idiag debugfs read port doorbell
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the data to.
 * @nbytes: The number of bytes to read.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine reads data from the @phba device doorbell register according
 * to the idiag command, and copies to user @buf. Depending on the doorbell
 * register read command setup, it does either a single doorbell register
 * read or dump all doorbell registers.
 *
 * Returns:
 * This function returns the amount of data that was read (this could be less
 * than @nbytes if the end of the file was reached) or a negative error value.
 **/
static ssize_t
lpfc_idiag_drbacc_read(struct file *file, char __user *buf, size_t nbytes,
                       loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        uint32_t drb_reg_id, i;
        char *pbuffer;
        int len = 0;

        /* This is a user read operation */
        debug->op = LPFC_IDIAG_OP_RD;

        if (!debug->buffer)
                debug->buffer = kmalloc(LPFC_DRB_ACC_BUF_SIZE, GFP_KERNEL);
        if (!debug->buffer)
                return 0;
        pbuffer = debug->buffer;

        if (*ppos)
                return 0;

        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD)
                drb_reg_id = idiag.cmd.data[IDIAG_DRBACC_REGID_INDX];
        else
                return 0;

        if (drb_reg_id == LPFC_DRB_ACC_ALL)
                for (i = 1; i <= LPFC_DRB_MAX; i++)
                        len = lpfc_idiag_drbacc_read_reg(phba,
                                                         pbuffer, len, i);
        else
                len = lpfc_idiag_drbacc_read_reg(phba,
                                                 pbuffer, len, drb_reg_id);

        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
}

/**
 * lpfc_idiag_drbacc_write - Syntax check and set up idiag drbacc commands
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the user data from.
 * @nbytes: The number of bytes to get.
 * @ppos: The position in the file to start reading from.
 *
 * This routine get the debugfs idiag command struct from user space and then
 * perform the syntax check for port doorbell register read (dump) or write
 * (set) command accordingly. In the case of port queue read command, it sets
 * up the command in the idiag command struct for the following debugfs read
 * operation. In the case of port doorbell register write operation, it
 * executes the write operation into the port doorbell register accordingly.
 *
 * It returns the @nbytges passing in from debugfs user space when successful.
 * In case of error conditions, it returns proper error code back to the user
 * space.
 **/
static ssize_t
lpfc_idiag_drbacc_write(struct file *file, const char __user *buf,
                        size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        uint32_t drb_reg_id, value, reg_val = 0;
        void __iomem *drb_reg;
        int rc;

        /* This is a user write operation */
        debug->op = LPFC_IDIAG_OP_WR;

        rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
        if (rc < 0)
                return rc;

        /* Sanity check on command line arguments */
        drb_reg_id = idiag.cmd.data[IDIAG_DRBACC_REGID_INDX];
        value = idiag.cmd.data[IDIAG_DRBACC_VALUE_INDX];

        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
                if (rc != LPFC_DRB_ACC_WR_CMD_ARG)
                        goto error_out;
                if (drb_reg_id > LPFC_DRB_MAX)
                        goto error_out;
        } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_RD) {
                if (rc != LPFC_DRB_ACC_RD_CMD_ARG)
                        goto error_out;
                if ((drb_reg_id > LPFC_DRB_MAX) &&
                    (drb_reg_id != LPFC_DRB_ACC_ALL))
                        goto error_out;
        } else
                goto error_out;

        /* Perform the write access operation */
        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
                switch (drb_reg_id) {
                case LPFC_DRB_EQ:
                        drb_reg = phba->sli4_hba.EQDBregaddr;
                        break;
                case LPFC_DRB_CQ:
                        drb_reg = phba->sli4_hba.CQDBregaddr;
                        break;
                case LPFC_DRB_MQ:
                        drb_reg = phba->sli4_hba.MQDBregaddr;
                        break;
                case LPFC_DRB_WQ:
                        drb_reg = phba->sli4_hba.WQDBregaddr;
                        break;
                case LPFC_DRB_RQ:
                        drb_reg = phba->sli4_hba.RQDBregaddr;
                        break;
                default:
                        goto error_out;
                }

                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_WR)
                        reg_val = value;
                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_ST) {
                        reg_val = readl(drb_reg);
                        reg_val |= value;
                }
                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_DRBACC_CL) {
                        reg_val = readl(drb_reg);
                        reg_val &= ~value;
                }
                writel(reg_val, drb_reg);
                readl(drb_reg); /* flush */
        }
        return nbytes;

error_out:
        /* Clean out command structure on command error out */
        memset(&idiag, 0, sizeof(idiag));
        return -EINVAL;
}

/**
 * lpfc_idiag_ctlacc_read_reg - idiag debugfs read a control registers
 * @phba: The pointer to hba structure.
 * @pbuffer: The pointer to the buffer to copy the data to.
 * @len: The length of bytes to copied.
 * @drbregid: The id to doorbell registers.
 *
 * Description:
 * This routine reads a control register and copies its content to the
 * user buffer pointed to by @pbuffer.
 *
 * Returns:
 * This function returns the amount of data that was copied into @pbuffer.
 **/
static int
lpfc_idiag_ctlacc_read_reg(struct lpfc_hba *phba, char *pbuffer,
                           int len, uint32_t ctlregid)
{

        if (!pbuffer)
                return 0;

        switch (ctlregid) {
        case LPFC_CTL_PORT_SEM:
                len += scnprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len,
                                "Port SemReg:   0x%08x\n",
                                readl(phba->sli4_hba.conf_regs_memmap_p +
                                      LPFC_CTL_PORT_SEM_OFFSET));
                break;
        case LPFC_CTL_PORT_STA:
                len += scnprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len,
                                "Port StaReg:   0x%08x\n",
                                readl(phba->sli4_hba.conf_regs_memmap_p +
                                      LPFC_CTL_PORT_STA_OFFSET));
                break;
        case LPFC_CTL_PORT_CTL:
                len += scnprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len,
                                "Port CtlReg:   0x%08x\n",
                                readl(phba->sli4_hba.conf_regs_memmap_p +
                                      LPFC_CTL_PORT_CTL_OFFSET));
                break;
        case LPFC_CTL_PORT_ER1:
                len += scnprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len,
                                "Port Er1Reg:   0x%08x\n",
                                readl(phba->sli4_hba.conf_regs_memmap_p +
                                      LPFC_CTL_PORT_ER1_OFFSET));
                break;
        case LPFC_CTL_PORT_ER2:
                len += scnprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len,
                                "Port Er2Reg:   0x%08x\n",
                                readl(phba->sli4_hba.conf_regs_memmap_p +
                                      LPFC_CTL_PORT_ER2_OFFSET));
                break;
        case LPFC_CTL_PDEV_CTL:
                len += scnprintf(pbuffer+len, LPFC_CTL_ACC_BUF_SIZE-len,
                                "PDev CtlReg:   0x%08x\n",
                                readl(phba->sli4_hba.conf_regs_memmap_p +
                                      LPFC_CTL_PDEV_CTL_OFFSET));
                break;
        default:
                break;
        }
        return len;
}

/**
 * lpfc_idiag_ctlacc_read - idiag debugfs read port and device control register
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the data to.
 * @nbytes: The number of bytes to read.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine reads data from the @phba port and device registers according
 * to the idiag command, and copies to user @buf.
 *
 * Returns:
 * This function returns the amount of data that was read (this could be less
 * than @nbytes if the end of the file was reached) or a negative error value.
 **/
static ssize_t
lpfc_idiag_ctlacc_read(struct file *file, char __user *buf, size_t nbytes,
                       loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        uint32_t ctl_reg_id, i;
        char *pbuffer;
        int len = 0;

        /* This is a user read operation */
        debug->op = LPFC_IDIAG_OP_RD;

        if (!debug->buffer)
                debug->buffer = kmalloc(LPFC_CTL_ACC_BUF_SIZE, GFP_KERNEL);
        if (!debug->buffer)
                return 0;
        pbuffer = debug->buffer;

        if (*ppos)
                return 0;

        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_RD)
                ctl_reg_id = idiag.cmd.data[IDIAG_CTLACC_REGID_INDX];
        else
                return 0;

        if (ctl_reg_id == LPFC_CTL_ACC_ALL)
                for (i = 1; i <= LPFC_CTL_MAX; i++)
                        len = lpfc_idiag_ctlacc_read_reg(phba,
                                                         pbuffer, len, i);
        else
                len = lpfc_idiag_ctlacc_read_reg(phba,
                                                 pbuffer, len, ctl_reg_id);

        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
}

/**
 * lpfc_idiag_ctlacc_write - Syntax check and set up idiag ctlacc commands
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the user data from.
 * @nbytes: The number of bytes to get.
 * @ppos: The position in the file to start reading from.
 *
 * This routine get the debugfs idiag command struct from user space and then
 * perform the syntax check for port and device control register read (dump)
 * or write (set) command accordingly.
 *
 * It returns the @nbytges passing in from debugfs user space when successful.
 * In case of error conditions, it returns proper error code back to the user
 * space.
 **/
static ssize_t
lpfc_idiag_ctlacc_write(struct file *file, const char __user *buf,
                        size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        uint32_t ctl_reg_id, value, reg_val = 0;
        void __iomem *ctl_reg;
        int rc;

        /* This is a user write operation */
        debug->op = LPFC_IDIAG_OP_WR;

        rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
        if (rc < 0)
                return rc;

        /* Sanity check on command line arguments */
        ctl_reg_id = idiag.cmd.data[IDIAG_CTLACC_REGID_INDX];
        value = idiag.cmd.data[IDIAG_CTLACC_VALUE_INDX];

        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_WR ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_ST ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_CL) {
                if (rc != LPFC_CTL_ACC_WR_CMD_ARG)
                        goto error_out;
                if (ctl_reg_id > LPFC_CTL_MAX)
                        goto error_out;
        } else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_RD) {
                if (rc != LPFC_CTL_ACC_RD_CMD_ARG)
                        goto error_out;
                if ((ctl_reg_id > LPFC_CTL_MAX) &&
                    (ctl_reg_id != LPFC_CTL_ACC_ALL))
                        goto error_out;
        } else
                goto error_out;

        /* Perform the write access operation */
        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_WR ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_ST ||
            idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_CL) {
                switch (ctl_reg_id) {
                case LPFC_CTL_PORT_SEM:
                        ctl_reg = phba->sli4_hba.conf_regs_memmap_p +
                                        LPFC_CTL_PORT_SEM_OFFSET;
                        break;
                case LPFC_CTL_PORT_STA:
                        ctl_reg = phba->sli4_hba.conf_regs_memmap_p +
                                        LPFC_CTL_PORT_STA_OFFSET;
                        break;
                case LPFC_CTL_PORT_CTL:
                        ctl_reg = phba->sli4_hba.conf_regs_memmap_p +
                                        LPFC_CTL_PORT_CTL_OFFSET;
                        break;
                case LPFC_CTL_PORT_ER1:
                        ctl_reg = phba->sli4_hba.conf_regs_memmap_p +
                                        LPFC_CTL_PORT_ER1_OFFSET;
                        break;
                case LPFC_CTL_PORT_ER2:
                        ctl_reg = phba->sli4_hba.conf_regs_memmap_p +
                                        LPFC_CTL_PORT_ER2_OFFSET;
                        break;
                case LPFC_CTL_PDEV_CTL:
                        ctl_reg = phba->sli4_hba.conf_regs_memmap_p +
                                        LPFC_CTL_PDEV_CTL_OFFSET;
                        break;
                default:
                        goto error_out;
                }

                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_WR)
                        reg_val = value;
                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_ST) {
                        reg_val = readl(ctl_reg);
                        reg_val |= value;
                }
                if (idiag.cmd.opcode == LPFC_IDIAG_CMD_CTLACC_CL) {
                        reg_val = readl(ctl_reg);
                        reg_val &= ~value;
                }
                writel(reg_val, ctl_reg);
                readl(ctl_reg); /* flush */
        }
        return nbytes;

error_out:
        /* Clean out command structure on command error out */
        memset(&idiag, 0, sizeof(idiag));
        return -EINVAL;
}

/**
 * lpfc_idiag_mbxacc_get_setup - idiag debugfs get mailbox access setup
 * @phba: Pointer to HBA context object.
 * @pbuffer: Pointer to data buffer.
 *
 * Description:
 * This routine gets the driver mailbox access debugfs setup information.
 *
 * Returns:
 * This function returns the amount of data that was read (this could be less
 * than @nbytes if the end of the file was reached) or a negative error value.
 **/
static int
lpfc_idiag_mbxacc_get_setup(struct lpfc_hba *phba, char *pbuffer)
{
        uint32_t mbx_dump_map, mbx_dump_cnt, mbx_word_cnt, mbx_mbox_cmd;
        int len = 0;

        mbx_mbox_cmd = idiag.cmd.data[IDIAG_MBXACC_MBCMD_INDX];
        mbx_dump_map = idiag.cmd.data[IDIAG_MBXACC_DPMAP_INDX];
        mbx_dump_cnt = idiag.cmd.data[IDIAG_MBXACC_DPCNT_INDX];
        mbx_word_cnt = idiag.cmd.data[IDIAG_MBXACC_WDCNT_INDX];

        len += scnprintf(pbuffer+len, LPFC_MBX_ACC_BUF_SIZE-len,
                        "mbx_dump_map: 0x%08x\n", mbx_dump_map);
        len += scnprintf(pbuffer+len, LPFC_MBX_ACC_BUF_SIZE-len,
                        "mbx_dump_cnt: %04d\n", mbx_dump_cnt);
        len += scnprintf(pbuffer+len, LPFC_MBX_ACC_BUF_SIZE-len,
                        "mbx_word_cnt: %04d\n", mbx_word_cnt);
        len += scnprintf(pbuffer+len, LPFC_MBX_ACC_BUF_SIZE-len,
                        "mbx_mbox_cmd: 0x%02x\n", mbx_mbox_cmd);

        return len;
}

/**
 * lpfc_idiag_mbxacc_read - idiag debugfs read on mailbox access
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the data to.
 * @nbytes: The number of bytes to read.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine reads data from the @phba driver mailbox access debugfs setup
 * information.
 *
 * Returns:
 * This function returns the amount of data that was read (this could be less
 * than @nbytes if the end of the file was reached) or a negative error value.
 **/
static ssize_t
lpfc_idiag_mbxacc_read(struct file *file, char __user *buf, size_t nbytes,
                       loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        char *pbuffer;
        int len = 0;

        /* This is a user read operation */
        debug->op = LPFC_IDIAG_OP_RD;

        if (!debug->buffer)
                debug->buffer = kmalloc(LPFC_MBX_ACC_BUF_SIZE, GFP_KERNEL);
        if (!debug->buffer)
                return 0;
        pbuffer = debug->buffer;

        if (*ppos)
                return 0;

        if ((idiag.cmd.opcode != LPFC_IDIAG_CMD_MBXACC_DP) &&
            (idiag.cmd.opcode != LPFC_IDIAG_BSG_MBXACC_DP))
                return 0;

        len = lpfc_idiag_mbxacc_get_setup(phba, pbuffer);

        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
}

/**
 * lpfc_idiag_mbxacc_write - Syntax check and set up idiag mbxacc commands
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the user data from.
 * @nbytes: The number of bytes to get.
 * @ppos: The position in the file to start reading from.
 *
 * This routine get the debugfs idiag command struct from user space and then
 * perform the syntax check for driver mailbox command (dump) and sets up the
 * necessary states in the idiag command struct accordingly.
 *
 * It returns the @nbytges passing in from debugfs user space when successful.
 * In case of error conditions, it returns proper error code back to the user
 * space.
 **/
static ssize_t
lpfc_idiag_mbxacc_write(struct file *file, const char __user *buf,
                        size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        uint32_t mbx_dump_map, mbx_dump_cnt, mbx_word_cnt, mbx_mbox_cmd;
        int rc;

        /* This is a user write operation */
        debug->op = LPFC_IDIAG_OP_WR;

        rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
        if (rc < 0)
                return rc;

        /* Sanity check on command line arguments */
        mbx_mbox_cmd = idiag.cmd.data[IDIAG_MBXACC_MBCMD_INDX];
        mbx_dump_map = idiag.cmd.data[IDIAG_MBXACC_DPMAP_INDX];
        mbx_dump_cnt = idiag.cmd.data[IDIAG_MBXACC_DPCNT_INDX];
        mbx_word_cnt = idiag.cmd.data[IDIAG_MBXACC_WDCNT_INDX];

        if (idiag.cmd.opcode == LPFC_IDIAG_CMD_MBXACC_DP) {
                if (!(mbx_dump_map & LPFC_MBX_DMP_MBX_ALL))
                        goto error_out;
                if ((mbx_dump_map & ~LPFC_MBX_DMP_MBX_ALL) &&
                    (mbx_dump_map != LPFC_MBX_DMP_ALL))
                        goto error_out;
                if (mbx_word_cnt > sizeof(MAILBOX_t))
                        goto error_out;
        } else if (idiag.cmd.opcode == LPFC_IDIAG_BSG_MBXACC_DP) {
                if (!(mbx_dump_map & LPFC_BSG_DMP_MBX_ALL))
                        goto error_out;
                if ((mbx_dump_map & ~LPFC_BSG_DMP_MBX_ALL) &&
                    (mbx_dump_map != LPFC_MBX_DMP_ALL))
                        goto error_out;
                if (mbx_word_cnt > (BSG_MBOX_SIZE)/4)
                        goto error_out;
                if (mbx_mbox_cmd != 0x9b)
                        goto error_out;
        } else
                goto error_out;

        if (mbx_word_cnt == 0)
                goto error_out;
        if (rc != LPFC_MBX_DMP_ARG)
                goto error_out;
        if (mbx_mbox_cmd & ~0xff)
                goto error_out;

        /* condition for stop mailbox dump */
        if (mbx_dump_cnt == 0)
                goto reset_out;

        return nbytes;

reset_out:
        /* Clean out command structure on command error out */
        memset(&idiag, 0, sizeof(idiag));
        return nbytes;

error_out:
        /* Clean out command structure on command error out */
        memset(&idiag, 0, sizeof(idiag));
        return -EINVAL;
}

/**
 * lpfc_idiag_extacc_avail_get - get the available extents information
 * @phba: pointer to lpfc hba data structure.
 * @pbuffer: pointer to internal buffer.
 * @len: length into the internal buffer data has been copied.
 *
 * Description:
 * This routine is to get the available extent information.
 *
 * Returns:
 * overall lenth of the data read into the internal buffer.
 **/
static int
lpfc_idiag_extacc_avail_get(struct lpfc_hba *phba, char *pbuffer, int len)
{
        uint16_t ext_cnt, ext_size;

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\nAvailable Extents Information:\n");

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tPort Available VPI extents: ");
        lpfc_sli4_get_avail_extnt_rsrc(phba, LPFC_RSC_TYPE_FCOE_VPI,
                                       &ext_cnt, &ext_size);
        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "Count %3d, Size %3d\n", ext_cnt, ext_size);

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tPort Available VFI extents: ");
        lpfc_sli4_get_avail_extnt_rsrc(phba, LPFC_RSC_TYPE_FCOE_VFI,
                                       &ext_cnt, &ext_size);
        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "Count %3d, Size %3d\n", ext_cnt, ext_size);

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tPort Available RPI extents: ");
        lpfc_sli4_get_avail_extnt_rsrc(phba, LPFC_RSC_TYPE_FCOE_RPI,
                                       &ext_cnt, &ext_size);
        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "Count %3d, Size %3d\n", ext_cnt, ext_size);

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tPort Available XRI extents: ");
        lpfc_sli4_get_avail_extnt_rsrc(phba, LPFC_RSC_TYPE_FCOE_XRI,
                                       &ext_cnt, &ext_size);
        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "Count %3d, Size %3d\n", ext_cnt, ext_size);

        return len;
}

/**
 * lpfc_idiag_extacc_alloc_get - get the allocated extents information
 * @phba: pointer to lpfc hba data structure.
 * @pbuffer: pointer to internal buffer.
 * @len: length into the internal buffer data has been copied.
 *
 * Description:
 * This routine is to get the allocated extent information.
 *
 * Returns:
 * overall lenth of the data read into the internal buffer.
 **/
static int
lpfc_idiag_extacc_alloc_get(struct lpfc_hba *phba, char *pbuffer, int len)
{
        uint16_t ext_cnt, ext_size;
        int rc;

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\nAllocated Extents Information:\n");

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tHost Allocated VPI extents: ");
        rc = lpfc_sli4_get_allocated_extnts(phba, LPFC_RSC_TYPE_FCOE_VPI,
                                            &ext_cnt, &ext_size);
        if (!rc)
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "Port %d Extent %3d, Size %3d\n",
                                phba->brd_no, ext_cnt, ext_size);
        else
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "N/A\n");

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tHost Allocated VFI extents: ");
        rc = lpfc_sli4_get_allocated_extnts(phba, LPFC_RSC_TYPE_FCOE_VFI,
                                            &ext_cnt, &ext_size);
        if (!rc)
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "Port %d Extent %3d, Size %3d\n",
                                phba->brd_no, ext_cnt, ext_size);
        else
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "N/A\n");

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tHost Allocated RPI extents: ");
        rc = lpfc_sli4_get_allocated_extnts(phba, LPFC_RSC_TYPE_FCOE_RPI,
                                            &ext_cnt, &ext_size);
        if (!rc)
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "Port %d Extent %3d, Size %3d\n",
                                phba->brd_no, ext_cnt, ext_size);
        else
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "N/A\n");

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tHost Allocated XRI extents: ");
        rc = lpfc_sli4_get_allocated_extnts(phba, LPFC_RSC_TYPE_FCOE_XRI,
                                            &ext_cnt, &ext_size);
        if (!rc)
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "Port %d Extent %3d, Size %3d\n",
                                phba->brd_no, ext_cnt, ext_size);
        else
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "N/A\n");

        return len;
}

/**
 * lpfc_idiag_extacc_drivr_get - get driver extent information
 * @phba: pointer to lpfc hba data structure.
 * @pbuffer: pointer to internal buffer.
 * @len: length into the internal buffer data has been copied.
 *
 * Description:
 * This routine is to get the driver extent information.
 *
 * Returns:
 * overall lenth of the data read into the internal buffer.
 **/
static int
lpfc_idiag_extacc_drivr_get(struct lpfc_hba *phba, char *pbuffer, int len)
{
        struct lpfc_rsrc_blks *rsrc_blks;
        int index;

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\nDriver Extents Information:\n");

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tVPI extents:\n");
        index = 0;
        list_for_each_entry(rsrc_blks, &phba->lpfc_vpi_blk_list, list) {
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "\t\tBlock %3d: Start %4d, Count %4d\n",
                                index, rsrc_blks->rsrc_start,
                                rsrc_blks->rsrc_size);
                index++;
        }
        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tVFI extents:\n");
        index = 0;
        list_for_each_entry(rsrc_blks, &phba->sli4_hba.lpfc_vfi_blk_list,
                            list) {
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "\t\tBlock %3d: Start %4d, Count %4d\n",
                                index, rsrc_blks->rsrc_start,
                                rsrc_blks->rsrc_size);
                index++;
        }

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tRPI extents:\n");
        index = 0;
        list_for_each_entry(rsrc_blks, &phba->sli4_hba.lpfc_rpi_blk_list,
                            list) {
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "\t\tBlock %3d: Start %4d, Count %4d\n",
                                index, rsrc_blks->rsrc_start,
                                rsrc_blks->rsrc_size);
                index++;
        }

        len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                        "\tXRI extents:\n");
        index = 0;
        list_for_each_entry(rsrc_blks, &phba->sli4_hba.lpfc_xri_blk_list,
                            list) {
                len += scnprintf(pbuffer+len, LPFC_EXT_ACC_BUF_SIZE-len,
                                "\t\tBlock %3d: Start %4d, Count %4d\n",
                                index, rsrc_blks->rsrc_start,
                                rsrc_blks->rsrc_size);
                index++;
        }

        return len;
}

/**
 * lpfc_idiag_extacc_write - Syntax check and set up idiag extacc commands
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the user data from.
 * @nbytes: The number of bytes to get.
 * @ppos: The position in the file to start reading from.
 *
 * This routine get the debugfs idiag command struct from user space and then
 * perform the syntax check for extent information access commands and sets
 * up the necessary states in the idiag command struct accordingly.
 *
 * It returns the @nbytges passing in from debugfs user space when successful.
 * In case of error conditions, it returns proper error code back to the user
 * space.
 **/
static ssize_t
lpfc_idiag_extacc_write(struct file *file, const char __user *buf,
                        size_t nbytes, loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        uint32_t ext_map;
        int rc;

        /* This is a user write operation */
        debug->op = LPFC_IDIAG_OP_WR;

        rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
        if (rc < 0)
                return rc;

        ext_map = idiag.cmd.data[IDIAG_EXTACC_EXMAP_INDX];

        if (idiag.cmd.opcode != LPFC_IDIAG_CMD_EXTACC_RD)
                goto error_out;
        if (rc != LPFC_EXT_ACC_CMD_ARG)
                goto error_out;
        if (!(ext_map & LPFC_EXT_ACC_ALL))
                goto error_out;

        return nbytes;
error_out:
        /* Clean out command structure on command error out */
        memset(&idiag, 0, sizeof(idiag));
        return -EINVAL;
}

/**
 * lpfc_idiag_extacc_read - idiag debugfs read access to extent information
 * @file: The file pointer to read from.
 * @buf: The buffer to copy the data to.
 * @nbytes: The number of bytes to read.
 * @ppos: The position in the file to start reading from.
 *
 * Description:
 * This routine reads data from the proper extent information according to
 * the idiag command, and copies to user @buf.
 *
 * Returns:
 * This function returns the amount of data that was read (this could be less
 * than @nbytes if the end of the file was reached) or a negative error value.
 **/
static ssize_t
lpfc_idiag_extacc_read(struct file *file, char __user *buf, size_t nbytes,
                       loff_t *ppos)
{
        struct lpfc_debug *debug = file->private_data;
        struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
        char *pbuffer;
        uint32_t ext_map;
        int len = 0;

        /* This is a user read operation */
        debug->op = LPFC_IDIAG_OP_RD;

        if (!debug->buffer)
                debug->buffer = kmalloc(LPFC_EXT_ACC_BUF_SIZE, GFP_KERNEL);
        if (!debug->buffer)
                return 0;
        pbuffer = debug->buffer;
        if (*ppos)
                return 0;
        if (idiag.cmd.opcode != LPFC_IDIAG_CMD_EXTACC_RD)
                return 0;

        ext_map = idiag.cmd.data[IDIAG_EXTACC_EXMAP_INDX];
        if (ext_map & LPFC_EXT_ACC_AVAIL)
                len = lpfc_idiag_extacc_avail_get(phba, pbuffer, len);
        if (ext_map & LPFC_EXT_ACC_ALLOC)
                len = lpfc_idiag_extacc_alloc_get(phba, pbuffer, len);
        if (ext_map & LPFC_EXT_ACC_DRIVR)
                len = lpfc_idiag_extacc_drivr_get(phba, pbuffer, len);

        return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
}

#undef lpfc_debugfs_op_disc_trc
static const struct file_operations lpfc_debugfs_op_disc_trc = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_disc_trc_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .release =      lpfc_debugfs_release,
};

#undef lpfc_debugfs_op_nodelist
static const struct file_operations lpfc_debugfs_op_nodelist = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_nodelist_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .release =      lpfc_debugfs_release,
};

#undef lpfc_debugfs_op_multixripools
static const struct file_operations lpfc_debugfs_op_multixripools = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_multixripools_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .write =        lpfc_debugfs_multixripools_write,
        .release =      lpfc_debugfs_release,
};

#undef lpfc_debugfs_op_hbqinfo
static const struct file_operations lpfc_debugfs_op_hbqinfo = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_hbqinfo_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .release =      lpfc_debugfs_release,
};

#ifdef LPFC_HDWQ_LOCK_STAT
#undef lpfc_debugfs_op_lockstat
static const struct file_operations lpfc_debugfs_op_lockstat = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_lockstat_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .write =        lpfc_debugfs_lockstat_write,
        .release =      lpfc_debugfs_release,
};
#endif

#undef lpfc_debugfs_ras_log
static const struct file_operations lpfc_debugfs_ras_log = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_ras_log_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .release =      lpfc_debugfs_ras_log_release,
};

#undef lpfc_debugfs_op_dumpHBASlim
static const struct file_operations lpfc_debugfs_op_dumpHBASlim = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_dumpHBASlim_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .release =      lpfc_debugfs_release,
};

#undef lpfc_debugfs_op_dumpHostSlim
static const struct file_operations lpfc_debugfs_op_dumpHostSlim = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_dumpHostSlim_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .release =      lpfc_debugfs_release,
};

#undef lpfc_debugfs_op_nvmestat
static const struct file_operations lpfc_debugfs_op_nvmestat = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_nvmestat_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .write =        lpfc_debugfs_nvmestat_write,
        .release =      lpfc_debugfs_release,
};

#undef lpfc_debugfs_op_scsistat
static const struct file_operations lpfc_debugfs_op_scsistat = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_scsistat_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .write =        lpfc_debugfs_scsistat_write,
        .release =      lpfc_debugfs_release,
};

#undef lpfc_debugfs_op_nvmektime
static const struct file_operations lpfc_debugfs_op_nvmektime = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_nvmektime_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .write =        lpfc_debugfs_nvmektime_write,
        .release =      lpfc_debugfs_release,
};

#undef lpfc_debugfs_op_nvmeio_trc
static const struct file_operations lpfc_debugfs_op_nvmeio_trc = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_nvmeio_trc_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .write =        lpfc_debugfs_nvmeio_trc_write,
        .release =      lpfc_debugfs_release,
};

#undef lpfc_debugfs_op_cpucheck
static const struct file_operations lpfc_debugfs_op_cpucheck = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_cpucheck_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .write =        lpfc_debugfs_cpucheck_write,
        .release =      lpfc_debugfs_release,
};

#undef lpfc_debugfs_op_dif_err
static const struct file_operations lpfc_debugfs_op_dif_err = {
        .owner =        THIS_MODULE,
        .open =         simple_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_dif_err_read,
        .write =        lpfc_debugfs_dif_err_write,
        .release =      lpfc_debugfs_dif_err_release,
};

#undef lpfc_debugfs_op_slow_ring_trc
static const struct file_operations lpfc_debugfs_op_slow_ring_trc = {
        .owner =        THIS_MODULE,
        .open =         lpfc_debugfs_slow_ring_trc_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_debugfs_read,
        .release =      lpfc_debugfs_release,
};

static struct dentry *lpfc_debugfs_root = NULL;
static atomic_t lpfc_debugfs_hba_count;

/*
 * File operations for the iDiag debugfs
 */
#undef lpfc_idiag_op_pciCfg
static const struct file_operations lpfc_idiag_op_pciCfg = {
        .owner =        THIS_MODULE,
        .open =         lpfc_idiag_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_idiag_pcicfg_read,
        .write =        lpfc_idiag_pcicfg_write,
        .release =      lpfc_idiag_cmd_release,
};

#undef lpfc_idiag_op_barAcc
static const struct file_operations lpfc_idiag_op_barAcc = {
        .owner =        THIS_MODULE,
        .open =         lpfc_idiag_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_idiag_baracc_read,
        .write =        lpfc_idiag_baracc_write,
        .release =      lpfc_idiag_cmd_release,
};

#undef lpfc_idiag_op_queInfo
static const struct file_operations lpfc_idiag_op_queInfo = {
        .owner =        THIS_MODULE,
        .open =         lpfc_idiag_open,
        .read =         lpfc_idiag_queinfo_read,
        .release =      lpfc_idiag_release,
};

#undef lpfc_idiag_op_queAcc
static const struct file_operations lpfc_idiag_op_queAcc = {
        .owner =        THIS_MODULE,
        .open =         lpfc_idiag_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_idiag_queacc_read,
        .write =        lpfc_idiag_queacc_write,
        .release =      lpfc_idiag_cmd_release,
};

#undef lpfc_idiag_op_drbAcc
static const struct file_operations lpfc_idiag_op_drbAcc = {
        .owner =        THIS_MODULE,
        .open =         lpfc_idiag_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_idiag_drbacc_read,
        .write =        lpfc_idiag_drbacc_write,
        .release =      lpfc_idiag_cmd_release,
};

#undef lpfc_idiag_op_ctlAcc
static const struct file_operations lpfc_idiag_op_ctlAcc = {
        .owner =        THIS_MODULE,
        .open =         lpfc_idiag_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_idiag_ctlacc_read,
        .write =        lpfc_idiag_ctlacc_write,
        .release =      lpfc_idiag_cmd_release,
};

#undef lpfc_idiag_op_mbxAcc
static const struct file_operations lpfc_idiag_op_mbxAcc = {
        .owner =        THIS_MODULE,
        .open =         lpfc_idiag_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_idiag_mbxacc_read,
        .write =        lpfc_idiag_mbxacc_write,
        .release =      lpfc_idiag_cmd_release,
};

#undef lpfc_idiag_op_extAcc
static const struct file_operations lpfc_idiag_op_extAcc = {
        .owner =        THIS_MODULE,
        .open =         lpfc_idiag_open,
        .llseek =       lpfc_debugfs_lseek,
        .read =         lpfc_idiag_extacc_read,
        .write =        lpfc_idiag_extacc_write,
        .release =      lpfc_idiag_cmd_release,
};
#endif

/* lpfc_idiag_mbxacc_dump_bsg_mbox - idiag debugfs dump bsg mailbox command
 * @phba: Pointer to HBA context object.
 * @dmabuf: Pointer to a DMA buffer descriptor.
 *
 * Description:
 * This routine dump a bsg pass-through non-embedded mailbox command with
 * external buffer.
 **/
void
lpfc_idiag_mbxacc_dump_bsg_mbox(struct lpfc_hba *phba, enum nemb_type nemb_tp,
                                enum mbox_type mbox_tp, enum dma_type dma_tp,
                                enum sta_type sta_tp,
                                struct lpfc_dmabuf *dmabuf, uint32_t ext_buf)
{
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        uint32_t *mbx_mbox_cmd, *mbx_dump_map, *mbx_dump_cnt, *mbx_word_cnt;
        char line_buf[LPFC_MBX_ACC_LBUF_SZ];
        int len = 0;
        uint32_t do_dump = 0;
        uint32_t *pword;
        uint32_t i;

        if (idiag.cmd.opcode != LPFC_IDIAG_BSG_MBXACC_DP)
                return;

        mbx_mbox_cmd = &idiag.cmd.data[IDIAG_MBXACC_MBCMD_INDX];
        mbx_dump_map = &idiag.cmd.data[IDIAG_MBXACC_DPMAP_INDX];
        mbx_dump_cnt = &idiag.cmd.data[IDIAG_MBXACC_DPCNT_INDX];
        mbx_word_cnt = &idiag.cmd.data[IDIAG_MBXACC_WDCNT_INDX];

        if (!(*mbx_dump_map & LPFC_MBX_DMP_ALL) ||
            (*mbx_dump_cnt == 0) ||
            (*mbx_word_cnt == 0))
                return;

        if (*mbx_mbox_cmd != 0x9B)
                return;

        if ((mbox_tp == mbox_rd) && (dma_tp == dma_mbox)) {
                if (*mbx_dump_map & LPFC_BSG_DMP_MBX_RD_MBX) {
                        do_dump |= LPFC_BSG_DMP_MBX_RD_MBX;
                        pr_err("\nRead mbox command (x%x), "
                               "nemb:0x%x, extbuf_cnt:%d:\n",
                               sta_tp, nemb_tp, ext_buf);
                }
        }
        if ((mbox_tp == mbox_rd) && (dma_tp == dma_ebuf)) {
                if (*mbx_dump_map & LPFC_BSG_DMP_MBX_RD_BUF) {
                        do_dump |= LPFC_BSG_DMP_MBX_RD_BUF;
                        pr_err("\nRead mbox buffer (x%x), "
                               "nemb:0x%x, extbuf_seq:%d:\n",
                               sta_tp, nemb_tp, ext_buf);
                }
        }
        if ((mbox_tp == mbox_wr) && (dma_tp == dma_mbox)) {
                if (*mbx_dump_map & LPFC_BSG_DMP_MBX_WR_MBX) {
                        do_dump |= LPFC_BSG_DMP_MBX_WR_MBX;
                        pr_err("\nWrite mbox command (x%x), "
                               "nemb:0x%x, extbuf_cnt:%d:\n",
                               sta_tp, nemb_tp, ext_buf);
                }
        }
        if ((mbox_tp == mbox_wr) && (dma_tp == dma_ebuf)) {
                if (*mbx_dump_map & LPFC_BSG_DMP_MBX_WR_BUF) {
                        do_dump |= LPFC_BSG_DMP_MBX_WR_BUF;
                        pr_err("\nWrite mbox buffer (x%x), "
                               "nemb:0x%x, extbuf_seq:%d:\n",
                               sta_tp, nemb_tp, ext_buf);
                }
        }

        /* dump buffer content */
        if (do_dump) {
                pword = (uint32_t *)dmabuf->virt;
                for (i = 0; i < *mbx_word_cnt; i++) {
                        if (!(i % 8)) {
                                if (i != 0)
                                        pr_err("%s\n", line_buf);
                                len = 0;
                                len += scnprintf(line_buf+len,
                                                LPFC_MBX_ACC_LBUF_SZ-len,
                                                "%03d: ", i);
                        }
                        len += scnprintf(line_buf+len, LPFC_MBX_ACC_LBUF_SZ-len,
                                        "%08x ", (uint32_t)*pword);
                        pword++;
                }
                if ((i - 1) % 8)
                        pr_err("%s\n", line_buf);
                (*mbx_dump_cnt)--;
        }

        /* Clean out command structure on reaching dump count */
        if (*mbx_dump_cnt == 0)
                memset(&idiag, 0, sizeof(idiag));
        return;
#endif
}

/* lpfc_idiag_mbxacc_dump_issue_mbox - idiag debugfs dump issue mailbox command
 * @phba: Pointer to HBA context object.
 * @dmabuf: Pointer to a DMA buffer descriptor.
 *
 * Description:
 * This routine dump a pass-through non-embedded mailbox command from issue
 * mailbox command.
 **/
void
lpfc_idiag_mbxacc_dump_issue_mbox(struct lpfc_hba *phba, MAILBOX_t *pmbox)
{
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        uint32_t *mbx_dump_map, *mbx_dump_cnt, *mbx_word_cnt, *mbx_mbox_cmd;
        char line_buf[LPFC_MBX_ACC_LBUF_SZ];
        int len = 0;
        uint32_t *pword;
        uint8_t *pbyte;
        uint32_t i, j;

        if (idiag.cmd.opcode != LPFC_IDIAG_CMD_MBXACC_DP)
                return;

        mbx_mbox_cmd = &idiag.cmd.data[IDIAG_MBXACC_MBCMD_INDX];
        mbx_dump_map = &idiag.cmd.data[IDIAG_MBXACC_DPMAP_INDX];
        mbx_dump_cnt = &idiag.cmd.data[IDIAG_MBXACC_DPCNT_INDX];
        mbx_word_cnt = &idiag.cmd.data[IDIAG_MBXACC_WDCNT_INDX];

        if (!(*mbx_dump_map & LPFC_MBX_DMP_MBX_ALL) ||
            (*mbx_dump_cnt == 0) ||
            (*mbx_word_cnt == 0))
                return;

        if ((*mbx_mbox_cmd != LPFC_MBX_ALL_CMD) &&
            (*mbx_mbox_cmd != pmbox->mbxCommand))
                return;

        /* dump buffer content */
        if (*mbx_dump_map & LPFC_MBX_DMP_MBX_WORD) {
                pr_err("Mailbox command:0x%x dump by word:\n",
                       pmbox->mbxCommand);
                pword = (uint32_t *)pmbox;
                for (i = 0; i < *mbx_word_cnt; i++) {
                        if (!(i % 8)) {
                                if (i != 0)
                                        pr_err("%s\n", line_buf);
                                len = 0;
                                memset(line_buf, 0, LPFC_MBX_ACC_LBUF_SZ);
                                len += scnprintf(line_buf+len,
                                                LPFC_MBX_ACC_LBUF_SZ-len,
                                                "%03d: ", i);
                        }
                        len += scnprintf(line_buf+len, LPFC_MBX_ACC_LBUF_SZ-len,
                                        "%08x ",
                                        ((uint32_t)*pword) & 0xffffffff);
                        pword++;
                }
                if ((i - 1) % 8)
                        pr_err("%s\n", line_buf);
                pr_err("\n");
        }
        if (*mbx_dump_map & LPFC_MBX_DMP_MBX_BYTE) {
                pr_err("Mailbox command:0x%x dump by byte:\n",
                       pmbox->mbxCommand);
                pbyte = (uint8_t *)pmbox;
                for (i = 0; i < *mbx_word_cnt; i++) {
                        if (!(i % 8)) {
                                if (i != 0)
                                        pr_err("%s\n", line_buf);
                                len = 0;
                                memset(line_buf, 0, LPFC_MBX_ACC_LBUF_SZ);
                                len += scnprintf(line_buf+len,
                                                LPFC_MBX_ACC_LBUF_SZ-len,
                                                "%03d: ", i);
                        }
                        for (j = 0; j < 4; j++) {
                                len += scnprintf(line_buf+len,
                                                LPFC_MBX_ACC_LBUF_SZ-len,
                                                "%02x",
                                                ((uint8_t)*pbyte) & 0xff);
                                pbyte++;
                        }
                        len += scnprintf(line_buf+len,
                                        LPFC_MBX_ACC_LBUF_SZ-len, " ");
                }
                if ((i - 1) % 8)
                        pr_err("%s\n", line_buf);
                pr_err("\n");
        }
        (*mbx_dump_cnt)--;

        /* Clean out command structure on reaching dump count */
        if (*mbx_dump_cnt == 0)
                memset(&idiag, 0, sizeof(idiag));
        return;
#endif
}

/**
 * lpfc_debugfs_initialize - Initialize debugfs for a vport
 * @vport: The vport pointer to initialize.
 *
 * Description:
 * When Debugfs is configured this routine sets up the lpfc debugfs file system.
 * If not already created, this routine will create the lpfc directory, and
 * lpfcX directory (for this HBA), and vportX directory for this vport. It will
 * also create each file used to access lpfc specific debugfs information.
 **/
inline void
lpfc_debugfs_initialize(struct lpfc_vport *vport)
{
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        struct lpfc_hba   *phba = vport->phba;
        char name[64];
        uint32_t num, i;
        bool pport_setup = false;

        if (!lpfc_debugfs_enable)
                return;

        /* Setup lpfc root directory */
        if (!lpfc_debugfs_root) {
                lpfc_debugfs_root = debugfs_create_dir("lpfc", NULL);
                atomic_set(&lpfc_debugfs_hba_count, 0);
        }
        if (!lpfc_debugfs_start_time)
                lpfc_debugfs_start_time = jiffies;

        /* Setup funcX directory for specific HBA PCI function */
        snprintf(name, sizeof(name), "fn%d", phba->brd_no);
        if (!phba->hba_debugfs_root) {
                pport_setup = true;
                phba->hba_debugfs_root =
                        debugfs_create_dir(name, lpfc_debugfs_root);
                atomic_inc(&lpfc_debugfs_hba_count);
                atomic_set(&phba->debugfs_vport_count, 0);

                /* Multi-XRI pools */
                snprintf(name, sizeof(name), "multixripools");
                phba->debug_multixri_pools =
                        debugfs_create_file(name, S_IFREG | 0644,
                                            phba->hba_debugfs_root,
                                            phba,
                                            &lpfc_debugfs_op_multixripools);
                if (!phba->debug_multixri_pools) {
                        lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
                                         "0527 Cannot create debugfs multixripools\n");
                        goto debug_failed;
                }

                /* RAS log */
                snprintf(name, sizeof(name), "ras_log");
                phba->debug_ras_log =
                        debugfs_create_file(name, 0644,
                                            phba->hba_debugfs_root,
                                            phba, &lpfc_debugfs_ras_log);
                if (!phba->debug_ras_log) {
                        lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
                                         "6148 Cannot create debugfs"
                                         " ras_log\n");
                        goto debug_failed;
                }

                /* Setup hbqinfo */
                snprintf(name, sizeof(name), "hbqinfo");
                phba->debug_hbqinfo =
                        debugfs_create_file(name, S_IFREG | 0644,
                                            phba->hba_debugfs_root,
                                            phba, &lpfc_debugfs_op_hbqinfo);

#ifdef LPFC_HDWQ_LOCK_STAT
                /* Setup lockstat */
                snprintf(name, sizeof(name), "lockstat");
                phba->debug_lockstat =
                        debugfs_create_file(name, S_IFREG | 0644,
                                            phba->hba_debugfs_root,
                                            phba, &lpfc_debugfs_op_lockstat);
                if (!phba->debug_lockstat) {
                        lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
                                         "4610 Cant create debugfs lockstat\n");
                        goto debug_failed;
                }
#endif

                /* Setup dumpHBASlim */
                if (phba->sli_rev < LPFC_SLI_REV4) {
                        snprintf(name, sizeof(name), "dumpHBASlim");
                        phba->debug_dumpHBASlim =
                                debugfs_create_file(name,
                                        S_IFREG|S_IRUGO|S_IWUSR,
                                        phba->hba_debugfs_root,
                                        phba, &lpfc_debugfs_op_dumpHBASlim);
                } else
                        phba->debug_dumpHBASlim = NULL;

                /* Setup dumpHostSlim */
                if (phba->sli_rev < LPFC_SLI_REV4) {
                        snprintf(name, sizeof(name), "dumpHostSlim");
                        phba->debug_dumpHostSlim =
                                debugfs_create_file(name,
                                        S_IFREG|S_IRUGO|S_IWUSR,
                                        phba->hba_debugfs_root,
                                        phba, &lpfc_debugfs_op_dumpHostSlim);
                } else
                        phba->debug_dumpHostSlim = NULL;

                /* Setup DIF Error Injections */
                snprintf(name, sizeof(name), "InjErrLBA");
                phba->debug_InjErrLBA =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                        phba->hba_debugfs_root,
                        phba, &lpfc_debugfs_op_dif_err);
                phba->lpfc_injerr_lba = LPFC_INJERR_LBA_OFF;

                snprintf(name, sizeof(name), "InjErrNPortID");
                phba->debug_InjErrNPortID =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                        phba->hba_debugfs_root,
                        phba, &lpfc_debugfs_op_dif_err);

                snprintf(name, sizeof(name), "InjErrWWPN");
                phba->debug_InjErrWWPN =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                        phba->hba_debugfs_root,
                        phba, &lpfc_debugfs_op_dif_err);

                snprintf(name, sizeof(name), "writeGuardInjErr");
                phba->debug_writeGuard =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                        phba->hba_debugfs_root,
                        phba, &lpfc_debugfs_op_dif_err);

                snprintf(name, sizeof(name), "writeAppInjErr");
                phba->debug_writeApp =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                        phba->hba_debugfs_root,
                        phba, &lpfc_debugfs_op_dif_err);

                snprintf(name, sizeof(name), "writeRefInjErr");
                phba->debug_writeRef =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                        phba->hba_debugfs_root,
                        phba, &lpfc_debugfs_op_dif_err);

                snprintf(name, sizeof(name), "readGuardInjErr");
                phba->debug_readGuard =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                        phba->hba_debugfs_root,
                        phba, &lpfc_debugfs_op_dif_err);

                snprintf(name, sizeof(name), "readAppInjErr");
                phba->debug_readApp =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                        phba->hba_debugfs_root,
                        phba, &lpfc_debugfs_op_dif_err);

                snprintf(name, sizeof(name), "readRefInjErr");
                phba->debug_readRef =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                        phba->hba_debugfs_root,
                        phba, &lpfc_debugfs_op_dif_err);

                /* Setup slow ring trace */
                if (lpfc_debugfs_max_slow_ring_trc) {
                        num = lpfc_debugfs_max_slow_ring_trc - 1;
                        if (num & lpfc_debugfs_max_slow_ring_trc) {
                                /* Change to be a power of 2 */
                                num = lpfc_debugfs_max_slow_ring_trc;
                                i = 0;
                                while (num > 1) {
                                        num = num >> 1;
                                        i++;
                                }
                                lpfc_debugfs_max_slow_ring_trc = (1 << i);
                                pr_err("lpfc_debugfs_max_disc_trc changed to "
                                       "%d\n", lpfc_debugfs_max_disc_trc);
                        }
                }

                snprintf(name, sizeof(name), "slow_ring_trace");
                phba->debug_slow_ring_trc =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                                 phba->hba_debugfs_root,
                                 phba, &lpfc_debugfs_op_slow_ring_trc);
                if (!phba->slow_ring_trc) {
                        phba->slow_ring_trc = kmalloc(
                                (sizeof(struct lpfc_debugfs_trc) *
                                lpfc_debugfs_max_slow_ring_trc),
                                GFP_KERNEL);
                        if (!phba->slow_ring_trc) {
                                lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
                                                 "0416 Cannot create debugfs "
                                                 "slow_ring buffer\n");
                                goto debug_failed;
                        }
                        atomic_set(&phba->slow_ring_trc_cnt, 0);
                        memset(phba->slow_ring_trc, 0,
                                (sizeof(struct lpfc_debugfs_trc) *
                                lpfc_debugfs_max_slow_ring_trc));
                }

                snprintf(name, sizeof(name), "nvmeio_trc");
                phba->debug_nvmeio_trc =
                        debugfs_create_file(name, 0644,
                                            phba->hba_debugfs_root,
                                            phba, &lpfc_debugfs_op_nvmeio_trc);

                atomic_set(&phba->nvmeio_trc_cnt, 0);
                if (lpfc_debugfs_max_nvmeio_trc) {
                        num = lpfc_debugfs_max_nvmeio_trc - 1;
                        if (num & lpfc_debugfs_max_disc_trc) {
                                /* Change to be a power of 2 */
                                num = lpfc_debugfs_max_nvmeio_trc;
                                i = 0;
                                while (num > 1) {
                                        num = num >> 1;
                                        i++;
                                }
                                lpfc_debugfs_max_nvmeio_trc = (1 << i);
                                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                                "0575 lpfc_debugfs_max_nvmeio_trc "
                                                "changed to %d\n",
                                                lpfc_debugfs_max_nvmeio_trc);
                        }
                        phba->nvmeio_trc_size = lpfc_debugfs_max_nvmeio_trc;

                        /* Allocate trace buffer and initialize */
                        phba->nvmeio_trc = kzalloc(
                                (sizeof(struct lpfc_debugfs_nvmeio_trc) *
                                phba->nvmeio_trc_size), GFP_KERNEL);

                        if (!phba->nvmeio_trc) {
                                lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
                                                "0576 Cannot create debugfs "
                                                "nvmeio_trc buffer\n");
                                goto nvmeio_off;
                        }
                        phba->nvmeio_trc_on = 1;
                        phba->nvmeio_trc_output_idx = 0;
                        phba->nvmeio_trc = NULL;
                } else {
nvmeio_off:
                        phba->nvmeio_trc_size = 0;
                        phba->nvmeio_trc_on = 0;
                        phba->nvmeio_trc_output_idx = 0;
                        phba->nvmeio_trc = NULL;
                }
        }

        snprintf(name, sizeof(name), "vport%d", vport->vpi);
        if (!vport->vport_debugfs_root) {
                vport->vport_debugfs_root =
                        debugfs_create_dir(name, phba->hba_debugfs_root);
                atomic_inc(&phba->debugfs_vport_count);
        }

        if (lpfc_debugfs_max_disc_trc) {
                num = lpfc_debugfs_max_disc_trc - 1;
                if (num & lpfc_debugfs_max_disc_trc) {
                        /* Change to be a power of 2 */
                        num = lpfc_debugfs_max_disc_trc;
                        i = 0;
                        while (num > 1) {
                                num = num >> 1;
                                i++;
                        }
                        lpfc_debugfs_max_disc_trc = (1 << i);
                        pr_err("lpfc_debugfs_max_disc_trc changed to %d\n",
                               lpfc_debugfs_max_disc_trc);
                }
        }

        vport->disc_trc = kzalloc(
                (sizeof(struct lpfc_debugfs_trc) * lpfc_debugfs_max_disc_trc),
                GFP_KERNEL);

        if (!vport->disc_trc) {
                lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
                                 "0418 Cannot create debugfs disc trace "
                                 "buffer\n");
                goto debug_failed;
        }
        atomic_set(&vport->disc_trc_cnt, 0);

        snprintf(name, sizeof(name), "discovery_trace");
        vport->debug_disc_trc =
                debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                                 vport->vport_debugfs_root,
                                 vport, &lpfc_debugfs_op_disc_trc);
        snprintf(name, sizeof(name), "nodelist");
        vport->debug_nodelist =
                debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                                 vport->vport_debugfs_root,
                                 vport, &lpfc_debugfs_op_nodelist);

        snprintf(name, sizeof(name), "nvmestat");
        vport->debug_nvmestat =
                debugfs_create_file(name, 0644,
                                    vport->vport_debugfs_root,
                                    vport, &lpfc_debugfs_op_nvmestat);

        snprintf(name, sizeof(name), "scsistat");
        vport->debug_scsistat =
                debugfs_create_file(name, 0644,
                                    vport->vport_debugfs_root,
                                    vport, &lpfc_debugfs_op_scsistat);
        if (!vport->debug_scsistat) {
                lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
                                 "4611 Cannot create debugfs scsistat\n");
                goto debug_failed;
        }

        snprintf(name, sizeof(name), "nvmektime");
        vport->debug_nvmektime =
                debugfs_create_file(name, 0644,
                                    vport->vport_debugfs_root,
                                    vport, &lpfc_debugfs_op_nvmektime);

        snprintf(name, sizeof(name), "cpucheck");
        vport->debug_cpucheck =
                debugfs_create_file(name, 0644,
                                    vport->vport_debugfs_root,
                                    vport, &lpfc_debugfs_op_cpucheck);

        /*
         * The following section is for additional directories/files for the
         * physical port.
         */

        if (!pport_setup)
                goto debug_failed;

        /*
         * iDiag debugfs root entry points for SLI4 device only
         */
        if (phba->sli_rev < LPFC_SLI_REV4)
                goto debug_failed;

        snprintf(name, sizeof(name), "iDiag");
        if (!phba->idiag_root) {
                phba->idiag_root =
                        debugfs_create_dir(name, phba->hba_debugfs_root);
                /* Initialize iDiag data structure */
                memset(&idiag, 0, sizeof(idiag));
        }

        /* iDiag read PCI config space */
        snprintf(name, sizeof(name), "pciCfg");
        if (!phba->idiag_pci_cfg) {
                phba->idiag_pci_cfg =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                                phba->idiag_root, phba, &lpfc_idiag_op_pciCfg);
                idiag.offset.last_rd = 0;
        }

        /* iDiag PCI BAR access */
        snprintf(name, sizeof(name), "barAcc");
        if (!phba->idiag_bar_acc) {
                phba->idiag_bar_acc =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                                phba->idiag_root, phba, &lpfc_idiag_op_barAcc);
                idiag.offset.last_rd = 0;
        }

        /* iDiag get PCI function queue information */
        snprintf(name, sizeof(name), "queInfo");
        if (!phba->idiag_que_info) {
                phba->idiag_que_info =
                        debugfs_create_file(name, S_IFREG|S_IRUGO,
                        phba->idiag_root, phba, &lpfc_idiag_op_queInfo);
        }

        /* iDiag access PCI function queue */
        snprintf(name, sizeof(name), "queAcc");
        if (!phba->idiag_que_acc) {
                phba->idiag_que_acc =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                                phba->idiag_root, phba, &lpfc_idiag_op_queAcc);
        }

        /* iDiag access PCI function doorbell registers */
        snprintf(name, sizeof(name), "drbAcc");
        if (!phba->idiag_drb_acc) {
                phba->idiag_drb_acc =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                                phba->idiag_root, phba, &lpfc_idiag_op_drbAcc);
        }

        /* iDiag access PCI function control registers */
        snprintf(name, sizeof(name), "ctlAcc");
        if (!phba->idiag_ctl_acc) {
                phba->idiag_ctl_acc =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                                phba->idiag_root, phba, &lpfc_idiag_op_ctlAcc);
        }

        /* iDiag access mbox commands */
        snprintf(name, sizeof(name), "mbxAcc");
        if (!phba->idiag_mbx_acc) {
                phba->idiag_mbx_acc =
                        debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
                                phba->idiag_root, phba, &lpfc_idiag_op_mbxAcc);
        }

        /* iDiag extents access commands */
        if (phba->sli4_hba.extents_in_use) {
                snprintf(name, sizeof(name), "extAcc");
                if (!phba->idiag_ext_acc) {
                        phba->idiag_ext_acc =
                                debugfs_create_file(name,
                                                    S_IFREG|S_IRUGO|S_IWUSR,
                                                    phba->idiag_root, phba,
                                                    &lpfc_idiag_op_extAcc);
                }
        }

debug_failed:
        return;
#endif
}

/**
 * lpfc_debugfs_terminate -  Tear down debugfs infrastructure for this vport
 * @vport: The vport pointer to remove from debugfs.
 *
 * Description:
 * When Debugfs is configured this routine removes debugfs file system elements
 * that are specific to this vport. It also checks to see if there are any
 * users left for the debugfs directories associated with the HBA and driver. If
 * this is the last user of the HBA directory or driver directory then it will
 * remove those from the debugfs infrastructure as well.
 **/
inline void
lpfc_debugfs_terminate(struct lpfc_vport *vport)
{
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
        struct lpfc_hba   *phba = vport->phba;

        kfree(vport->disc_trc);
        vport->disc_trc = NULL;

        debugfs_remove(vport->debug_disc_trc); /* discovery_trace */
        vport->debug_disc_trc = NULL;

        debugfs_remove(vport->debug_nodelist); /* nodelist */
        vport->debug_nodelist = NULL;

        debugfs_remove(vport->debug_nvmestat); /* nvmestat */
        vport->debug_nvmestat = NULL;

        debugfs_remove(vport->debug_scsistat); /* scsistat */
        vport->debug_scsistat = NULL;

        debugfs_remove(vport->debug_nvmektime); /* nvmektime */
        vport->debug_nvmektime = NULL;

        debugfs_remove(vport->debug_cpucheck); /* cpucheck */
        vport->debug_cpucheck = NULL;

        if (vport->vport_debugfs_root) {
                debugfs_remove(vport->vport_debugfs_root); /* vportX */
                vport->vport_debugfs_root = NULL;
                atomic_dec(&phba->debugfs_vport_count);
        }

        if (atomic_read(&phba->debugfs_vport_count) == 0) {

                debugfs_remove(phba->debug_multixri_pools); /* multixripools*/
                phba->debug_multixri_pools = NULL;

                debugfs_remove(phba->debug_hbqinfo); /* hbqinfo */
                phba->debug_hbqinfo = NULL;

                debugfs_remove(phba->debug_ras_log);
                phba->debug_ras_log = NULL;

#ifdef LPFC_HDWQ_LOCK_STAT
                debugfs_remove(phba->debug_lockstat); /* lockstat */
                phba->debug_lockstat = NULL;
#endif
                debugfs_remove(phba->debug_dumpHBASlim); /* HBASlim */
                phba->debug_dumpHBASlim = NULL;

                debugfs_remove(phba->debug_dumpHostSlim); /* HostSlim */
                phba->debug_dumpHostSlim = NULL;

                debugfs_remove(phba->debug_InjErrLBA); /* InjErrLBA */
                phba->debug_InjErrLBA = NULL;

                debugfs_remove(phba->debug_InjErrNPortID);
                phba->debug_InjErrNPortID = NULL;

                debugfs_remove(phba->debug_InjErrWWPN); /* InjErrWWPN */
                phba->debug_InjErrWWPN = NULL;

                debugfs_remove(phba->debug_writeGuard); /* writeGuard */
                phba->debug_writeGuard = NULL;

                debugfs_remove(phba->debug_writeApp); /* writeApp */
                phba->debug_writeApp = NULL;

                debugfs_remove(phba->debug_writeRef); /* writeRef */
                phba->debug_writeRef = NULL;

                debugfs_remove(phba->debug_readGuard); /* readGuard */
                phba->debug_readGuard = NULL;

                debugfs_remove(phba->debug_readApp); /* readApp */
                phba->debug_readApp = NULL;

                debugfs_remove(phba->debug_readRef); /* readRef */
                phba->debug_readRef = NULL;

                kfree(phba->slow_ring_trc);
                phba->slow_ring_trc = NULL;

                /* slow_ring_trace */
                debugfs_remove(phba->debug_slow_ring_trc);
                phba->debug_slow_ring_trc = NULL;

                debugfs_remove(phba->debug_nvmeio_trc);
                phba->debug_nvmeio_trc = NULL;

                kfree(phba->nvmeio_trc);
                phba->nvmeio_trc = NULL;

                /*
                 * iDiag release
                 */
                if (phba->sli_rev == LPFC_SLI_REV4) {
                        /* iDiag extAcc */
                        debugfs_remove(phba->idiag_ext_acc);
                        phba->idiag_ext_acc = NULL;

                        /* iDiag mbxAcc */
                        debugfs_remove(phba->idiag_mbx_acc);
                        phba->idiag_mbx_acc = NULL;

                        /* iDiag ctlAcc */
                        debugfs_remove(phba->idiag_ctl_acc);
                        phba->idiag_ctl_acc = NULL;

                        /* iDiag drbAcc */
                        debugfs_remove(phba->idiag_drb_acc);
                        phba->idiag_drb_acc = NULL;

                        /* iDiag queAcc */
                        debugfs_remove(phba->idiag_que_acc);
                        phba->idiag_que_acc = NULL;

                        /* iDiag queInfo */
                        debugfs_remove(phba->idiag_que_info);
                        phba->idiag_que_info = NULL;

                        /* iDiag barAcc */
                        debugfs_remove(phba->idiag_bar_acc);
                        phba->idiag_bar_acc = NULL;

                        /* iDiag pciCfg */
                        debugfs_remove(phba->idiag_pci_cfg);
                        phba->idiag_pci_cfg = NULL;

                        /* Finally remove the iDiag debugfs root */
                        debugfs_remove(phba->idiag_root);
                        phba->idiag_root = NULL;
                }

                if (phba->hba_debugfs_root) {
                        debugfs_remove(phba->hba_debugfs_root); /* fnX */
                        phba->hba_debugfs_root = NULL;
                        atomic_dec(&lpfc_debugfs_hba_count);
                }

                if (atomic_read(&lpfc_debugfs_hba_count) == 0) {
                        debugfs_remove(lpfc_debugfs_root); /* lpfc */
                        lpfc_debugfs_root = NULL;
                }
        }
#endif
        return;
}

/*
 * Driver debug utility routines outside of debugfs. The debug utility
 * routines implemented here is intended to be used in the instrumented
 * debug driver for debugging host or port issues.
 */

/**
 * lpfc_debug_dump_all_queues - dump all the queues with a hba
 * @phba: Pointer to HBA context object.
 *
 * This function dumps entries of all the queues asociated with the @phba.
 **/
void
lpfc_debug_dump_all_queues(struct lpfc_hba *phba)
{
        int idx;

        /*
         * Dump Work Queues (WQs)
         */
        lpfc_debug_dump_wq(phba, DUMP_MBX, 0);
        lpfc_debug_dump_wq(phba, DUMP_ELS, 0);
        lpfc_debug_dump_wq(phba, DUMP_NVMELS, 0);

        for (idx = 0; idx < phba->cfg_hdw_queue; idx++)
                lpfc_debug_dump_wq(phba, DUMP_IO, idx);

        lpfc_debug_dump_hdr_rq(phba);
        lpfc_debug_dump_dat_rq(phba);
        /*
         * Dump Complete Queues (CQs)
         */
        lpfc_debug_dump_cq(phba, DUMP_MBX, 0);
        lpfc_debug_dump_cq(phba, DUMP_ELS, 0);
        lpfc_debug_dump_cq(phba, DUMP_NVMELS, 0);

        for (idx = 0; idx < phba->cfg_hdw_queue; idx++)
                lpfc_debug_dump_cq(phba, DUMP_IO, idx);

        /*
         * Dump Event Queues (EQs)
         */
        for (idx = 0; idx < phba->cfg_hdw_queue; idx++)
                lpfc_debug_dump_hba_eq(phba, idx);
}