drivers/scsi/mpt3sas/mpt3sas_scsih.c

   1 /*
   2  * Scsi Host Layer for MPT (Message Passing Technology) based controllers
   3  *
   4  * This code is based on drivers/scsi/mpt3sas/mpt3sas_scsih.c
   5  * Copyright (C) 2012-2014  LSI Corporation
   6  * Copyright (C) 2013-2014 Avago Technologies
   7  *  (mailto: MPT-FusionLinux.pdl@avagotech.com)
   8  *
   9  * This program is free software; you can redistribute it and/or
  10  * modify it under the terms of the GNU General Public License
  11  * as published by the Free Software Foundation; either version 2
  12  * of the License, or (at your option) any later version.
  13  *
  14  * This program is distributed in the hope that it will be useful,
  15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  17  * GNU General Public License for more details.
  18  *
  19  * NO WARRANTY
  20  * THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
  21  * CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
  22  * LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
  23  * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
  24  * solely responsible for determining the appropriateness of using and
  25  * distributing the Program and assumes all risks associated with its
  26  * exercise of rights under this Agreement, including but not limited to
  27  * the risks and costs of program errors, damage to or loss of data,
  28  * programs or equipment, and unavailability or interruption of operations.
  29
  30  * DISCLAIMER OF LIABILITY
  31  * NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
  32  * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  33  * DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
  34  * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
  35  * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  36  * USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
  37  * HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
  38
  39  * You should have received a copy of the GNU General Public License
  40  * along with this program; if not, write to the Free Software
  41  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301,
  42  * USA.
  43  */
  44
  45 #include <linux/module.h>
  46 #include <linux/kernel.h>
  47 #include <linux/init.h>
  48 #include <linux/errno.h>
  49 #include <linux/blkdev.h>
  50 #include <linux/sched.h>
  51 #include <linux/workqueue.h>
  52 #include <linux/delay.h>
  53 #include <linux/pci.h>
  54 #include <linux/interrupt.h>
  55 #include <linux/aer.h>
  56 #include <linux/raid_class.h>
  57 #include <asm/unaligned.h>
  58
  59 #include "mpt3sas_base.h"
  60
  61 #define RAID_CHANNEL 1
  62 /* forward proto's */
  63 static void _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
  64         struct _sas_node *sas_expander);
  65 static void _firmware_event_work(struct work_struct *work);
  66
  67 static void _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
  68         struct _sas_device *sas_device);
  69 static int _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle,
  70         u8 retry_count, u8 is_pd);
  71
  72 static u8 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid);
  73
  74 /* global parameters */
  75 LIST_HEAD(mpt3sas_ioc_list);
  76 /* global ioc lock for list operations */
  77 DEFINE_SPINLOCK(gioc_lock);
  78
  79 MODULE_AUTHOR(MPT3SAS_AUTHOR);
  80 MODULE_DESCRIPTION(MPT3SAS_DESCRIPTION);
  81 MODULE_LICENSE("GPL");
  82 MODULE_VERSION(MPT3SAS_DRIVER_VERSION);
  83 MODULE_ALIAS("mpt2sas");
  84
  85 /* local parameters */
  86 static u8 scsi_io_cb_idx = -1;
  87 static u8 tm_cb_idx = -1;
  88 static u8 ctl_cb_idx = -1;
  89 static u8 base_cb_idx = -1;
  90 static u8 port_enable_cb_idx = -1;
  91 static u8 transport_cb_idx = -1;
  92 static u8 scsih_cb_idx = -1;
  93 static u8 config_cb_idx = -1;
  94 static int mpt2_ids;
  95 static int mpt3_ids;
  96
  97 static u8 tm_tr_cb_idx = -1 ;
  98 static u8 tm_tr_volume_cb_idx = -1 ;
  99 static u8 tm_sas_control_cb_idx = -1;
 100
 101 /* command line options */
 102 static u32 logging_level;
 103 MODULE_PARM_DESC(logging_level,
 104         " bits for enabling additional logging info (default=0)");
 105
 106
 107 static ushort max_sectors = 0xFFFF;
 108 module_param(max_sectors, ushort, 0);
 109 MODULE_PARM_DESC(max_sectors, "max sectors, range 64 to 32767  default=32767");
 110
 111
 112 static int missing_delay[2] = {-1, -1};
 113 module_param_array(missing_delay, int, NULL, 0);
 114 MODULE_PARM_DESC(missing_delay, " device missing delay , io missing delay");
 115
 116 /* scsi-mid layer global parmeter is max_report_luns, which is 511 */
 117 #define MPT3SAS_MAX_LUN (16895)
 118 static u64 max_lun = MPT3SAS_MAX_LUN;
 119 module_param(max_lun, ullong, 0);
 120 MODULE_PARM_DESC(max_lun, " max lun, default=16895 ");
 121
 122 static ushort hbas_to_enumerate;
 123 module_param(hbas_to_enumerate, ushort, 0);
 124 MODULE_PARM_DESC(hbas_to_enumerate,
 125                 " 0 - enumerates both SAS 2.0 & SAS 3.0 generation HBAs\n \
 126                   1 - enumerates only SAS 2.0 generation HBAs\n \
 127                   2 - enumerates only SAS 3.0 generation HBAs (default=0)");
 128
 129 /* diag_buffer_enable is bitwise
 130  * bit 0 set = TRACE
 131  * bit 1 set = SNAPSHOT
 132  * bit 2 set = EXTENDED
 133  *
 134  * Either bit can be set, or both
 135  */
 136 static int diag_buffer_enable = -1;
 137 module_param(diag_buffer_enable, int, 0);
 138 MODULE_PARM_DESC(diag_buffer_enable,
 139         " post diag buffers (TRACE=1/SNAPSHOT=2/EXTENDED=4/default=0)");
 140 static int disable_discovery = -1;
 141 module_param(disable_discovery, int, 0);
 142 MODULE_PARM_DESC(disable_discovery, " disable discovery ");
 143
 144
 145 /* permit overriding the host protection capabilities mask (EEDP/T10 PI) */
 146 static int prot_mask = -1;
 147 module_param(prot_mask, int, 0);
 148 MODULE_PARM_DESC(prot_mask, " host protection capabilities mask, def=7 ");
 149
 150
 151 /* raid transport support */
 152 struct raid_template *mpt3sas_raid_template;
 153 struct raid_template *mpt2sas_raid_template;
 154
 155
 156 /**
 157  * struct sense_info - common structure for obtaining sense keys
 158  * @skey: sense key
 159  * @asc: additional sense code
 160  * @ascq: additional sense code qualifier
 161  */
 162 struct sense_info {
 163         u8 skey;
 164         u8 asc;
 165         u8 ascq;
 166 };
 167
 168 #define MPT3SAS_PROCESS_TRIGGER_DIAG (0xFFFB)
 169 #define MPT3SAS_TURN_ON_PFA_LED (0xFFFC)
 170 #define MPT3SAS_PORT_ENABLE_COMPLETE (0xFFFD)
 171 #define MPT3SAS_ABRT_TASK_SET (0xFFFE)
 172 #define MPT3SAS_REMOVE_UNRESPONDING_DEVICES (0xFFFF)
 173 /**
 174  * struct fw_event_work - firmware event struct
 175  * @list: link list framework
 176  * @work: work object (ioc->fault_reset_work_q)
 177  * @ioc: per adapter object
 178  * @device_handle: device handle
 179  * @VF_ID: virtual function id
 180  * @VP_ID: virtual port id
 181  * @ignore: flag meaning this event has been marked to ignore
 182  * @event: firmware event MPI2_EVENT_XXX defined in mpi2_ioc.h
 183  * @refcount: kref for this event
 184  * @event_data: reply event data payload follows
 185  *
 186  * This object stored on ioc->fw_event_list.
 187  */
 188 struct fw_event_work {
 189         struct list_head        list;
 190         struct work_struct      work;
 191
 192         struct MPT3SAS_ADAPTER *ioc;
 193         u16                     device_handle;
 194         u8                      VF_ID;
 195         u8                      VP_ID;
 196         u8                      ignore;
 197         u16                     event;
 198         struct kref             refcount;
 199         char                    event_data[0] __aligned(4);
 200 };
 201
 202 static void fw_event_work_free(struct kref *r)
 203 {
 204         kfree(container_of(r, struct fw_event_work, refcount));
 205 }
 206
 207 static void fw_event_work_get(struct fw_event_work *fw_work)
 208 {
 209         kref_get(&fw_work->refcount);
 210 }
 211
 212 static void fw_event_work_put(struct fw_event_work *fw_work)
 213 {
 214         kref_put(&fw_work->refcount, fw_event_work_free);
 215 }
 216
 217 static struct fw_event_work *alloc_fw_event_work(int len)
 218 {
 219         struct fw_event_work *fw_event;
 220
 221         fw_event = kzalloc(sizeof(*fw_event) + len, GFP_ATOMIC);
 222         if (!fw_event)
 223                 return NULL;
 224
 225         kref_init(&fw_event->refcount);
 226         return fw_event;
 227 }
 228
 229 /**
 230  * struct _scsi_io_transfer - scsi io transfer
 231  * @handle: sas device handle (assigned by firmware)
 232  * @is_raid: flag set for hidden raid components
 233  * @dir: DMA_TO_DEVICE, DMA_FROM_DEVICE,
 234  * @data_length: data transfer length
 235  * @data_dma: dma pointer to data
 236  * @sense: sense data
 237  * @lun: lun number
 238  * @cdb_length: cdb length
 239  * @cdb: cdb contents
 240  * @timeout: timeout for this command
 241  * @VF_ID: virtual function id
 242  * @VP_ID: virtual port id
 243  * @valid_reply: flag set for reply message
 244  * @sense_length: sense length
 245  * @ioc_status: ioc status
 246  * @scsi_state: scsi state
 247  * @scsi_status: scsi staus
 248  * @log_info: log information
 249  * @transfer_length: data length transfer when there is a reply message
 250  *
 251  * Used for sending internal scsi commands to devices within this module.
 252  * Refer to _scsi_send_scsi_io().
 253  */
 254 struct _scsi_io_transfer {
 255         u16     handle;
 256         u8      is_raid;
 257         enum dma_data_direction dir;
 258         u32     data_length;
 259         dma_addr_t data_dma;
 260         u8      sense[SCSI_SENSE_BUFFERSIZE];
 261         u32     lun;
 262         u8      cdb_length;
 263         u8      cdb[32];
 264         u8      timeout;
 265         u8      VF_ID;
 266         u8      VP_ID;
 267         u8      valid_reply;
 268   /* the following bits are only valid when 'valid_reply = 1' */
 269         u32     sense_length;
 270         u16     ioc_status;
 271         u8      scsi_state;
 272         u8      scsi_status;
 273         u32     log_info;
 274         u32     transfer_length;
 275 };
 276
 277 /**
 278  * _scsih_set_debug_level - global setting of ioc->logging_level.
 279  *
 280  * Note: The logging levels are defined in mpt3sas_debug.h.
 281  */
 282 static int
 283 _scsih_set_debug_level(const char *val, struct kernel_param *kp)
 284 {
 285         int ret = param_set_int(val, kp);
 286         struct MPT3SAS_ADAPTER *ioc;
 287
 288         if (ret)
 289                 return ret;
 290
 291         pr_info("setting logging_level(0x%08x)\n", logging_level);
 292         spin_lock(&gioc_lock);
 293         list_for_each_entry(ioc, &mpt3sas_ioc_list, list)
 294                 ioc->logging_level = logging_level;
 295         spin_unlock(&gioc_lock);
 296         return 0;
 297 }
 298 module_param_call(logging_level, _scsih_set_debug_level, param_get_int,
 299         &logging_level, 0644);
 300
 301 /**
 302  * _scsih_srch_boot_sas_address - search based on sas_address
 303  * @sas_address: sas address
 304  * @boot_device: boot device object from bios page 2
 305  *
 306  * Returns 1 when there's a match, 0 means no match.
 307  */
 308 static inline int
 309 _scsih_srch_boot_sas_address(u64 sas_address,
 310         Mpi2BootDeviceSasWwid_t *boot_device)
 311 {
 312         return (sas_address == le64_to_cpu(boot_device->SASAddress)) ?  1 : 0;
 313 }
 314
 315 /**
 316  * _scsih_srch_boot_device_name - search based on device name
 317  * @device_name: device name specified in INDENTIFY fram
 318  * @boot_device: boot device object from bios page 2
 319  *
 320  * Returns 1 when there's a match, 0 means no match.
 321  */
 322 static inline int
 323 _scsih_srch_boot_device_name(u64 device_name,
 324         Mpi2BootDeviceDeviceName_t *boot_device)
 325 {
 326         return (device_name == le64_to_cpu(boot_device->DeviceName)) ? 1 : 0;
 327 }
 328
 329 /**
 330  * _scsih_srch_boot_encl_slot - search based on enclosure_logical_id/slot
 331  * @enclosure_logical_id: enclosure logical id
 332  * @slot_number: slot number
 333  * @boot_device: boot device object from bios page 2
 334  *
 335  * Returns 1 when there's a match, 0 means no match.
 336  */
 337 static inline int
 338 _scsih_srch_boot_encl_slot(u64 enclosure_logical_id, u16 slot_number,
 339         Mpi2BootDeviceEnclosureSlot_t *boot_device)
 340 {
 341         return (enclosure_logical_id == le64_to_cpu(boot_device->
 342             EnclosureLogicalID) && slot_number == le16_to_cpu(boot_device->
 343             SlotNumber)) ? 1 : 0;
 344 }
 345
 346 /**
 347  * _scsih_is_boot_device - search for matching boot device.
 348  * @sas_address: sas address
 349  * @device_name: device name specified in INDENTIFY fram
 350  * @enclosure_logical_id: enclosure logical id
 351  * @slot_number: slot number
 352  * @form: specifies boot device form
 353  * @boot_device: boot device object from bios page 2
 354  *
 355  * Returns 1 when there's a match, 0 means no match.
 356  */
 357 static int
 358 _scsih_is_boot_device(u64 sas_address, u64 device_name,
 359         u64 enclosure_logical_id, u16 slot, u8 form,
 360         Mpi2BiosPage2BootDevice_t *boot_device)
 361 {
 362         int rc = 0;
 363
 364         switch (form) {
 365         case MPI2_BIOSPAGE2_FORM_SAS_WWID:
 366                 if (!sas_address)
 367                         break;
 368                 rc = _scsih_srch_boot_sas_address(
 369                     sas_address, &boot_device->SasWwid);
 370                 break;
 371         case MPI2_BIOSPAGE2_FORM_ENCLOSURE_SLOT:
 372                 if (!enclosure_logical_id)
 373                         break;
 374                 rc = _scsih_srch_boot_encl_slot(
 375                     enclosure_logical_id,
 376                     slot, &boot_device->EnclosureSlot);
 377                 break;
 378         case MPI2_BIOSPAGE2_FORM_DEVICE_NAME:
 379                 if (!device_name)
 380                         break;
 381                 rc = _scsih_srch_boot_device_name(
 382                     device_name, &boot_device->DeviceName);
 383                 break;
 384         case MPI2_BIOSPAGE2_FORM_NO_DEVICE_SPECIFIED:
 385                 break;
 386         }
 387
 388         return rc;
 389 }
 390
 391 /**
 392  * _scsih_get_sas_address - set the sas_address for given device handle
 393  * @handle: device handle
 394  * @sas_address: sas address
 395  *
 396  * Returns 0 success, non-zero when failure
 397  */
 398 static int
 399 _scsih_get_sas_address(struct MPT3SAS_ADAPTER *ioc, u16 handle,
 400         u64 *sas_address)
 401 {
 402         Mpi2SasDevicePage0_t sas_device_pg0;
 403         Mpi2ConfigReply_t mpi_reply;
 404         u32 ioc_status;
 405
 406         *sas_address = 0;
 407
 408         if (handle <= ioc->sas_hba.num_phys) {
 409                 *sas_address = ioc->sas_hba.sas_address;
 410                 return 0;
 411         }
 412
 413         if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
 414             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
 415                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
 416                 __FILE__, __LINE__, __func__);
 417                 return -ENXIO;
 418         }
 419
 420         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
 421         if (ioc_status == MPI2_IOCSTATUS_SUCCESS) {
 422                 *sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
 423                 return 0;
 424         }
 425
 426         /* we hit this becuase the given parent handle doesn't exist */
 427         if (ioc_status == MPI2_IOCSTATUS_CONFIG_INVALID_PAGE)
 428                 return -ENXIO;
 429
 430         /* else error case */
 431         pr_err(MPT3SAS_FMT
 432                 "handle(0x%04x), ioc_status(0x%04x), failure at %s:%d/%s()!\n",
 433                 ioc->name, handle, ioc_status,
 434              __FILE__, __LINE__, __func__);
 435         return -EIO;
 436 }
 437
 438 /**
 439  * _scsih_determine_boot_device - determine boot device.
 440  * @ioc: per adapter object
 441  * @device: either sas_device or raid_device object
 442  * @is_raid: [flag] 1 = raid object, 0 = sas object
 443  *
 444  * Determines whether this device should be first reported device to
 445  * to scsi-ml or sas transport, this purpose is for persistent boot device.
 446  * There are primary, alternate, and current entries in bios page 2. The order
 447  * priority is primary, alternate, then current.  This routine saves
 448  * the corresponding device object and is_raid flag in the ioc object.
 449  * The saved data to be used later in _scsih_probe_boot_devices().
 450  */
 451 static void
 452 _scsih_determine_boot_device(struct MPT3SAS_ADAPTER *ioc,
 453         void *device, u8 is_raid)
 454 {
 455         struct _sas_device *sas_device;
 456         struct _raid_device *raid_device;
 457         u64 sas_address;
 458         u64 device_name;
 459         u64 enclosure_logical_id;
 460         u16 slot;
 461
 462          /* only process this function when driver loads */
 463         if (!ioc->is_driver_loading)
 464                 return;
 465
 466          /* no Bios, return immediately */
 467         if (!ioc->bios_pg3.BiosVersion)
 468                 return;
 469
 470         if (!is_raid) {
 471                 sas_device = device;
 472                 sas_address = sas_device->sas_address;
 473                 device_name = sas_device->device_name;
 474                 enclosure_logical_id = sas_device->enclosure_logical_id;
 475                 slot = sas_device->slot;
 476         } else {
 477                 raid_device = device;
 478                 sas_address = raid_device->wwid;
 479                 device_name = 0;
 480                 enclosure_logical_id = 0;
 481                 slot = 0;
 482         }
 483
 484         if (!ioc->req_boot_device.device) {
 485                 if (_scsih_is_boot_device(sas_address, device_name,
 486                     enclosure_logical_id, slot,
 487                     (ioc->bios_pg2.ReqBootDeviceForm &
 488                     MPI2_BIOSPAGE2_FORM_MASK),
 489                     &ioc->bios_pg2.RequestedBootDevice)) {
 490                         dinitprintk(ioc, pr_info(MPT3SAS_FMT
 491                            "%s: req_boot_device(0x%016llx)\n",
 492                             ioc->name, __func__,
 493                             (unsigned long long)sas_address));
 494                         ioc->req_boot_device.device = device;
 495                         ioc->req_boot_device.is_raid = is_raid;
 496                 }
 497         }
 498
 499         if (!ioc->req_alt_boot_device.device) {
 500                 if (_scsih_is_boot_device(sas_address, device_name,
 501                     enclosure_logical_id, slot,
 502                     (ioc->bios_pg2.ReqAltBootDeviceForm &
 503                     MPI2_BIOSPAGE2_FORM_MASK),
 504                     &ioc->bios_pg2.RequestedAltBootDevice)) {
 505                         dinitprintk(ioc, pr_info(MPT3SAS_FMT
 506                            "%s: req_alt_boot_device(0x%016llx)\n",
 507                             ioc->name, __func__,
 508                             (unsigned long long)sas_address));
 509                         ioc->req_alt_boot_device.device = device;
 510                         ioc->req_alt_boot_device.is_raid = is_raid;
 511                 }
 512         }
 513
 514         if (!ioc->current_boot_device.device) {
 515                 if (_scsih_is_boot_device(sas_address, device_name,
 516                     enclosure_logical_id, slot,
 517                     (ioc->bios_pg2.CurrentBootDeviceForm &
 518                     MPI2_BIOSPAGE2_FORM_MASK),
 519                     &ioc->bios_pg2.CurrentBootDevice)) {
 520                         dinitprintk(ioc, pr_info(MPT3SAS_FMT
 521                            "%s: current_boot_device(0x%016llx)\n",
 522                             ioc->name, __func__,
 523                             (unsigned long long)sas_address));
 524                         ioc->current_boot_device.device = device;
 525                         ioc->current_boot_device.is_raid = is_raid;
 526                 }
 527         }
 528 }
 529
 530 static struct _sas_device *
 531 __mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER *ioc,
 532                 struct MPT3SAS_TARGET *tgt_priv)
 533 {
 534         struct _sas_device *ret;
 535
 536         assert_spin_locked(&ioc->sas_device_lock);
 537
 538         ret = tgt_priv->sdev;
 539         if (ret)
 540                 sas_device_get(ret);
 541
 542         return ret;
 543 }
 544
 545 static struct _sas_device *
 546 mpt3sas_get_sdev_from_target(struct MPT3SAS_ADAPTER *ioc,
 547                 struct MPT3SAS_TARGET *tgt_priv)
 548 {
 549         struct _sas_device *ret;
 550         unsigned long flags;
 551
 552         spin_lock_irqsave(&ioc->sas_device_lock, flags);
 553         ret = __mpt3sas_get_sdev_from_target(ioc, tgt_priv);
 554         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 555
 556         return ret;
 557 }
 558
 559
 560 struct _sas_device *
 561 __mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc,
 562                                         u64 sas_address)
 563 {
 564         struct _sas_device *sas_device;
 565
 566         assert_spin_locked(&ioc->sas_device_lock);
 567
 568         list_for_each_entry(sas_device, &ioc->sas_device_list, list)
 569                 if (sas_device->sas_address == sas_address)
 570                         goto found_device;
 571
 572         list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
 573                 if (sas_device->sas_address == sas_address)
 574                         goto found_device;
 575
 576         return NULL;
 577
 578 found_device:
 579         sas_device_get(sas_device);
 580         return sas_device;
 581 }
 582
 583 /**
 584  * mpt3sas_get_sdev_by_addr - sas device search
 585  * @ioc: per adapter object
 586  * @sas_address: sas address
 587  * Context: Calling function should acquire ioc->sas_device_lock
 588  *
 589  * This searches for sas_device based on sas_address, then return sas_device
 590  * object.
 591  */
 592 struct _sas_device *
 593 mpt3sas_get_sdev_by_addr(struct MPT3SAS_ADAPTER *ioc,
 594         u64 sas_address)
 595 {
 596         struct _sas_device *sas_device;
 597         unsigned long flags;
 598
 599         spin_lock_irqsave(&ioc->sas_device_lock, flags);
 600         sas_device = __mpt3sas_get_sdev_by_addr(ioc,
 601                         sas_address);
 602         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 603
 604         return sas_device;
 605 }
 606
 607 static struct _sas_device *
 608 __mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 609 {
 610         struct _sas_device *sas_device;
 611
 612         assert_spin_locked(&ioc->sas_device_lock);
 613
 614         list_for_each_entry(sas_device, &ioc->sas_device_list, list)
 615                 if (sas_device->handle == handle)
 616                         goto found_device;
 617
 618         list_for_each_entry(sas_device, &ioc->sas_device_init_list, list)
 619                 if (sas_device->handle == handle)
 620                         goto found_device;
 621
 622         return NULL;
 623
 624 found_device:
 625         sas_device_get(sas_device);
 626         return sas_device;
 627 }
 628
 629 /**
 630  * mpt3sas_get_sdev_by_handle - sas device search
 631  * @ioc: per adapter object
 632  * @handle: sas device handle (assigned by firmware)
 633  * Context: Calling function should acquire ioc->sas_device_lock
 634  *
 635  * This searches for sas_device based on sas_address, then return sas_device
 636  * object.
 637  */
 638 static struct _sas_device *
 639 mpt3sas_get_sdev_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 640 {
 641         struct _sas_device *sas_device;
 642         unsigned long flags;
 643
 644         spin_lock_irqsave(&ioc->sas_device_lock, flags);
 645         sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
 646         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 647
 648         return sas_device;
 649 }
 650
 651 /**
 652  * _scsih_sas_device_remove - remove sas_device from list.
 653  * @ioc: per adapter object
 654  * @sas_device: the sas_device object
 655  * Context: This function will acquire ioc->sas_device_lock.
 656  *
 657  * If sas_device is on the list, remove it and decrement its reference count.
 658  */
 659 static void
 660 _scsih_sas_device_remove(struct MPT3SAS_ADAPTER *ioc,
 661         struct _sas_device *sas_device)
 662 {
 663         unsigned long flags;
 664
 665         if (!sas_device)
 666                 return;
 667         pr_info(MPT3SAS_FMT
 668             "removing handle(0x%04x), sas_addr(0x%016llx)\n",
 669             ioc->name, sas_device->handle,
 670             (unsigned long long) sas_device->sas_address);
 671
 672         if (sas_device->enclosure_handle != 0)
 673                 pr_info(MPT3SAS_FMT
 674                    "removing enclosure logical id(0x%016llx), slot(%d)\n",
 675                    ioc->name, (unsigned long long)
 676                    sas_device->enclosure_logical_id, sas_device->slot);
 677
 678         if (sas_device->connector_name[0] != '\0')
 679                 pr_info(MPT3SAS_FMT
 680                    "removing enclosure level(0x%04x), connector name( %s)\n",
 681                    ioc->name, sas_device->enclosure_level,
 682                    sas_device->connector_name);
 683
 684         /*
 685          * The lock serializes access to the list, but we still need to verify
 686          * that nobody removed the entry while we were waiting on the lock.
 687          */
 688         spin_lock_irqsave(&ioc->sas_device_lock, flags);
 689         if (!list_empty(&sas_device->list)) {
 690                 list_del_init(&sas_device->list);
 691                 sas_device_put(sas_device);
 692         }
 693         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 694 }
 695
 696 /**
 697  * _scsih_device_remove_by_handle - removing device object by handle
 698  * @ioc: per adapter object
 699  * @handle: device handle
 700  *
 701  * Return nothing.
 702  */
 703 static void
 704 _scsih_device_remove_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 705 {
 706         struct _sas_device *sas_device;
 707         unsigned long flags;
 708
 709         if (ioc->shost_recovery)
 710                 return;
 711
 712         spin_lock_irqsave(&ioc->sas_device_lock, flags);
 713         sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
 714         if (sas_device) {
 715                 list_del_init(&sas_device->list);
 716                 sas_device_put(sas_device);
 717         }
 718         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 719         if (sas_device) {
 720                 _scsih_remove_device(ioc, sas_device);
 721                 sas_device_put(sas_device);
 722         }
 723 }
 724
 725 /**
 726  * mpt3sas_device_remove_by_sas_address - removing device object by sas address
 727  * @ioc: per adapter object
 728  * @sas_address: device sas_address
 729  *
 730  * Return nothing.
 731  */
 732 void
 733 mpt3sas_device_remove_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
 734         u64 sas_address)
 735 {
 736         struct _sas_device *sas_device;
 737         unsigned long flags;
 738
 739         if (ioc->shost_recovery)
 740                 return;
 741
 742         spin_lock_irqsave(&ioc->sas_device_lock, flags);
 743         sas_device = __mpt3sas_get_sdev_by_addr(ioc, sas_address);
 744         if (sas_device) {
 745                 list_del_init(&sas_device->list);
 746                 sas_device_put(sas_device);
 747         }
 748         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 749         if (sas_device) {
 750                 _scsih_remove_device(ioc, sas_device);
 751                 sas_device_put(sas_device);
 752         }
 753 }
 754
 755 /**
 756  * _scsih_sas_device_add - insert sas_device to the list.
 757  * @ioc: per adapter object
 758  * @sas_device: the sas_device object
 759  * Context: This function will acquire ioc->sas_device_lock.
 760  *
 761  * Adding new object to the ioc->sas_device_list.
 762  */
 763 static void
 764 _scsih_sas_device_add(struct MPT3SAS_ADAPTER *ioc,
 765         struct _sas_device *sas_device)
 766 {
 767         unsigned long flags;
 768
 769         dewtprintk(ioc, pr_info(MPT3SAS_FMT
 770                 "%s: handle(0x%04x), sas_addr(0x%016llx)\n",
 771                 ioc->name, __func__, sas_device->handle,
 772                 (unsigned long long)sas_device->sas_address));
 773
 774         if (sas_device->enclosure_handle != 0)
 775                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
 776                     "%s: enclosure logical id(0x%016llx), slot( %d)\n",
 777                     ioc->name, __func__, (unsigned long long)
 778                     sas_device->enclosure_logical_id, sas_device->slot));
 779
 780         if (sas_device->connector_name[0] != '\0')
 781                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
 782                     "%s: enclosure level(0x%04x), connector name( %s)\n",
 783                     ioc->name, __func__,
 784                     sas_device->enclosure_level, sas_device->connector_name));
 785
 786         spin_lock_irqsave(&ioc->sas_device_lock, flags);
 787         sas_device_get(sas_device);
 788         list_add_tail(&sas_device->list, &ioc->sas_device_list);
 789         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 790
 791         if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
 792              sas_device->sas_address_parent)) {
 793                 _scsih_sas_device_remove(ioc, sas_device);
 794         } else if (!sas_device->starget) {
 795                 /*
 796                  * When asyn scanning is enabled, its not possible to remove
 797                  * devices while scanning is turned on due to an oops in
 798                  * scsi_sysfs_add_sdev()->add_device()->sysfs_addrm_start()
 799                  */
 800                 if (!ioc->is_driver_loading) {
 801                         mpt3sas_transport_port_remove(ioc,
 802                             sas_device->sas_address,
 803                             sas_device->sas_address_parent);
 804                         _scsih_sas_device_remove(ioc, sas_device);
 805                 }
 806         }
 807 }
 808
 809 /**
 810  * _scsih_sas_device_init_add - insert sas_device to the list.
 811  * @ioc: per adapter object
 812  * @sas_device: the sas_device object
 813  * Context: This function will acquire ioc->sas_device_lock.
 814  *
 815  * Adding new object at driver load time to the ioc->sas_device_init_list.
 816  */
 817 static void
 818 _scsih_sas_device_init_add(struct MPT3SAS_ADAPTER *ioc,
 819         struct _sas_device *sas_device)
 820 {
 821         unsigned long flags;
 822
 823         dewtprintk(ioc, pr_info(MPT3SAS_FMT
 824                 "%s: handle(0x%04x), sas_addr(0x%016llx)\n", ioc->name,
 825                 __func__, sas_device->handle,
 826                 (unsigned long long)sas_device->sas_address));
 827
 828         if (sas_device->enclosure_handle != 0)
 829                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
 830                     "%s: enclosure logical id(0x%016llx), slot( %d)\n",
 831                     ioc->name, __func__, (unsigned long long)
 832                     sas_device->enclosure_logical_id, sas_device->slot));
 833
 834         if (sas_device->connector_name[0] != '\0')
 835                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
 836                     "%s: enclosure level(0x%04x), connector name( %s)\n",
 837                     ioc->name, __func__, sas_device->enclosure_level,
 838                     sas_device->connector_name));
 839
 840         spin_lock_irqsave(&ioc->sas_device_lock, flags);
 841         sas_device_get(sas_device);
 842         list_add_tail(&sas_device->list, &ioc->sas_device_init_list);
 843         _scsih_determine_boot_device(ioc, sas_device, 0);
 844         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
 845 }
 846
 847 /**
 848  * _scsih_raid_device_find_by_id - raid device search
 849  * @ioc: per adapter object
 850  * @id: sas device target id
 851  * @channel: sas device channel
 852  * Context: Calling function should acquire ioc->raid_device_lock
 853  *
 854  * This searches for raid_device based on target id, then return raid_device
 855  * object.
 856  */
 857 static struct _raid_device *
 858 _scsih_raid_device_find_by_id(struct MPT3SAS_ADAPTER *ioc, int id, int channel)
 859 {
 860         struct _raid_device *raid_device, *r;
 861
 862         r = NULL;
 863         list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
 864                 if (raid_device->id == id && raid_device->channel == channel) {
 865                         r = raid_device;
 866                         goto out;
 867                 }
 868         }
 869
 870  out:
 871         return r;
 872 }
 873
 874 /**
 875  * mpt3sas_raid_device_find_by_handle - raid device search
 876  * @ioc: per adapter object
 877  * @handle: sas device handle (assigned by firmware)
 878  * Context: Calling function should acquire ioc->raid_device_lock
 879  *
 880  * This searches for raid_device based on handle, then return raid_device
 881  * object.
 882  */
 883 struct _raid_device *
 884 mpt3sas_raid_device_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 885 {
 886         struct _raid_device *raid_device, *r;
 887
 888         r = NULL;
 889         list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
 890                 if (raid_device->handle != handle)
 891                         continue;
 892                 r = raid_device;
 893                 goto out;
 894         }
 895
 896  out:
 897         return r;
 898 }
 899
 900 /**
 901  * _scsih_raid_device_find_by_wwid - raid device search
 902  * @ioc: per adapter object
 903  * @handle: sas device handle (assigned by firmware)
 904  * Context: Calling function should acquire ioc->raid_device_lock
 905  *
 906  * This searches for raid_device based on wwid, then return raid_device
 907  * object.
 908  */
 909 static struct _raid_device *
 910 _scsih_raid_device_find_by_wwid(struct MPT3SAS_ADAPTER *ioc, u64 wwid)
 911 {
 912         struct _raid_device *raid_device, *r;
 913
 914         r = NULL;
 915         list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
 916                 if (raid_device->wwid != wwid)
 917                         continue;
 918                 r = raid_device;
 919                 goto out;
 920         }
 921
 922  out:
 923         return r;
 924 }
 925
 926 /**
 927  * _scsih_raid_device_add - add raid_device object
 928  * @ioc: per adapter object
 929  * @raid_device: raid_device object
 930  *
 931  * This is added to the raid_device_list link list.
 932  */
 933 static void
 934 _scsih_raid_device_add(struct MPT3SAS_ADAPTER *ioc,
 935         struct _raid_device *raid_device)
 936 {
 937         unsigned long flags;
 938
 939         dewtprintk(ioc, pr_info(MPT3SAS_FMT
 940                 "%s: handle(0x%04x), wwid(0x%016llx)\n", ioc->name, __func__,
 941             raid_device->handle, (unsigned long long)raid_device->wwid));
 942
 943         spin_lock_irqsave(&ioc->raid_device_lock, flags);
 944         list_add_tail(&raid_device->list, &ioc->raid_device_list);
 945         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
 946 }
 947
 948 /**
 949  * _scsih_raid_device_remove - delete raid_device object
 950  * @ioc: per adapter object
 951  * @raid_device: raid_device object
 952  *
 953  */
 954 static void
 955 _scsih_raid_device_remove(struct MPT3SAS_ADAPTER *ioc,
 956         struct _raid_device *raid_device)
 957 {
 958         unsigned long flags;
 959
 960         spin_lock_irqsave(&ioc->raid_device_lock, flags);
 961         list_del(&raid_device->list);
 962         kfree(raid_device);
 963         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
 964 }
 965
 966 /**
 967  * mpt3sas_scsih_expander_find_by_handle - expander device search
 968  * @ioc: per adapter object
 969  * @handle: expander handle (assigned by firmware)
 970  * Context: Calling function should acquire ioc->sas_device_lock
 971  *
 972  * This searches for expander device based on handle, then returns the
 973  * sas_node object.
 974  */
 975 struct _sas_node *
 976 mpt3sas_scsih_expander_find_by_handle(struct MPT3SAS_ADAPTER *ioc, u16 handle)
 977 {
 978         struct _sas_node *sas_expander, *r;
 979
 980         r = NULL;
 981         list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
 982                 if (sas_expander->handle != handle)
 983                         continue;
 984                 r = sas_expander;
 985                 goto out;
 986         }
 987  out:
 988         return r;
 989 }
 990
 991 /**
 992  * mpt3sas_scsih_expander_find_by_sas_address - expander device search
 993  * @ioc: per adapter object
 994  * @sas_address: sas address
 995  * Context: Calling function should acquire ioc->sas_node_lock.
 996  *
 997  * This searches for expander device based on sas_address, then returns the
 998  * sas_node object.
 999  */
1000 struct _sas_node *
1001 mpt3sas_scsih_expander_find_by_sas_address(struct MPT3SAS_ADAPTER *ioc,
1002         u64 sas_address)
1003 {
1004         struct _sas_node *sas_expander, *r;
1005
1006         r = NULL;
1007         list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
1008                 if (sas_expander->sas_address != sas_address)
1009                         continue;
1010                 r = sas_expander;
1011                 goto out;
1012         }
1013  out:
1014         return r;
1015 }
1016
1017 /**
1018  * _scsih_expander_node_add - insert expander device to the list.
1019  * @ioc: per adapter object
1020  * @sas_expander: the sas_device object
1021  * Context: This function will acquire ioc->sas_node_lock.
1022  *
1023  * Adding new object to the ioc->sas_expander_list.
1024  *
1025  * Return nothing.
1026  */
1027 static void
1028 _scsih_expander_node_add(struct MPT3SAS_ADAPTER *ioc,
1029         struct _sas_node *sas_expander)
1030 {
1031         unsigned long flags;
1032
1033         spin_lock_irqsave(&ioc->sas_node_lock, flags);
1034         list_add_tail(&sas_expander->list, &ioc->sas_expander_list);
1035         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
1036 }
1037
1038 /**
1039  * _scsih_is_end_device - determines if device is an end device
1040  * @device_info: bitfield providing information about the device.
1041  * Context: none
1042  *
1043  * Returns 1 if end device.
1044  */
1045 static int
1046 _scsih_is_end_device(u32 device_info)
1047 {
1048         if (device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE &&
1049                 ((device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) |
1050                 (device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET) |
1051                 (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))
1052                 return 1;
1053         else
1054                 return 0;
1055 }
1056
1057 /**
1058  * _scsih_scsi_lookup_get - returns scmd entry
1059  * @ioc: per adapter object
1060  * @smid: system request message index
1061  *
1062  * Returns the smid stored scmd pointer.
1063  */
1064 static struct scsi_cmnd *
1065 _scsih_scsi_lookup_get(struct MPT3SAS_ADAPTER *ioc, u16 smid)
1066 {
1067         return ioc->scsi_lookup[smid - 1].scmd;
1068 }
1069
1070 /**
1071  * _scsih_scsi_lookup_get_clear - returns scmd entry
1072  * @ioc: per adapter object
1073  * @smid: system request message index
1074  *
1075  * Returns the smid stored scmd pointer.
1076  * Then will derefrence the stored scmd pointer.
1077  */
1078 static inline struct scsi_cmnd *
1079 _scsih_scsi_lookup_get_clear(struct MPT3SAS_ADAPTER *ioc, u16 smid)
1080 {
1081         unsigned long flags;
1082         struct scsi_cmnd *scmd;
1083
1084         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1085         scmd = ioc->scsi_lookup[smid - 1].scmd;
1086         ioc->scsi_lookup[smid - 1].scmd = NULL;
1087         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1088
1089         return scmd;
1090 }
1091
1092 /**
1093  * _scsih_scsi_lookup_find_by_scmd - scmd lookup
1094  * @ioc: per adapter object
1095  * @smid: system request message index
1096  * @scmd: pointer to scsi command object
1097  * Context: This function will acquire ioc->scsi_lookup_lock.
1098  *
1099  * This will search for a scmd pointer in the scsi_lookup array,
1100  * returning the revelent smid.  A returned value of zero means invalid.
1101  */
1102 static u16
1103 _scsih_scsi_lookup_find_by_scmd(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd
1104         *scmd)
1105 {
1106         u16 smid;
1107         unsigned long   flags;
1108         int i;
1109
1110         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1111         smid = 0;
1112         for (i = 0; i < ioc->scsiio_depth; i++) {
1113                 if (ioc->scsi_lookup[i].scmd == scmd) {
1114                         smid = ioc->scsi_lookup[i].smid;
1115                         goto out;
1116                 }
1117         }
1118  out:
1119         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1120         return smid;
1121 }
1122
1123 /**
1124  * _scsih_scsi_lookup_find_by_target - search for matching channel:id
1125  * @ioc: per adapter object
1126  * @id: target id
1127  * @channel: channel
1128  * Context: This function will acquire ioc->scsi_lookup_lock.
1129  *
1130  * This will search for a matching channel:id in the scsi_lookup array,
1131  * returning 1 if found.
1132  */
1133 static u8
1134 _scsih_scsi_lookup_find_by_target(struct MPT3SAS_ADAPTER *ioc, int id,
1135         int channel)
1136 {
1137         u8 found;
1138         unsigned long   flags;
1139         int i;
1140
1141         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1142         found = 0;
1143         for (i = 0 ; i < ioc->scsiio_depth; i++) {
1144                 if (ioc->scsi_lookup[i].scmd &&
1145                     (ioc->scsi_lookup[i].scmd->device->id == id &&
1146                     ioc->scsi_lookup[i].scmd->device->channel == channel)) {
1147                         found = 1;
1148                         goto out;
1149                 }
1150         }
1151  out:
1152         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1153         return found;
1154 }
1155
1156 /**
1157  * _scsih_scsi_lookup_find_by_lun - search for matching channel:id:lun
1158  * @ioc: per adapter object
1159  * @id: target id
1160  * @lun: lun number
1161  * @channel: channel
1162  * Context: This function will acquire ioc->scsi_lookup_lock.
1163  *
1164  * This will search for a matching channel:id:lun in the scsi_lookup array,
1165  * returning 1 if found.
1166  */
1167 static u8
1168 _scsih_scsi_lookup_find_by_lun(struct MPT3SAS_ADAPTER *ioc, int id,
1169         unsigned int lun, int channel)
1170 {
1171         u8 found;
1172         unsigned long   flags;
1173         int i;
1174
1175         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
1176         found = 0;
1177         for (i = 0 ; i < ioc->scsiio_depth; i++) {
1178                 if (ioc->scsi_lookup[i].scmd &&
1179                     (ioc->scsi_lookup[i].scmd->device->id == id &&
1180                     ioc->scsi_lookup[i].scmd->device->channel == channel &&
1181                     ioc->scsi_lookup[i].scmd->device->lun == lun)) {
1182                         found = 1;
1183                         goto out;
1184                 }
1185         }
1186  out:
1187         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
1188         return found;
1189 }
1190
1191 /**
1192  * scsih_change_queue_depth - setting device queue depth
1193  * @sdev: scsi device struct
1194  * @qdepth: requested queue depth
1195  *
1196  * Returns queue depth.
1197  */
1198 static int
1199 scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
1200 {
1201         struct Scsi_Host *shost = sdev->host;
1202         int max_depth;
1203         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
1204         struct MPT3SAS_DEVICE *sas_device_priv_data;
1205         struct MPT3SAS_TARGET *sas_target_priv_data;
1206         struct _sas_device *sas_device;
1207         unsigned long flags;
1208
1209         max_depth = shost->can_queue;
1210
1211         /* limit max device queue for SATA to 32 */
1212         sas_device_priv_data = sdev->hostdata;
1213         if (!sas_device_priv_data)
1214                 goto not_sata;
1215         sas_target_priv_data = sas_device_priv_data->sas_target;
1216         if (!sas_target_priv_data)
1217                 goto not_sata;
1218         if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME))
1219                 goto not_sata;
1220
1221         spin_lock_irqsave(&ioc->sas_device_lock, flags);
1222         sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
1223         if (sas_device) {
1224                 if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
1225                         max_depth = MPT3SAS_SATA_QUEUE_DEPTH;
1226
1227                 sas_device_put(sas_device);
1228         }
1229         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1230
1231  not_sata:
1232
1233         if (!sdev->tagged_supported)
1234                 max_depth = 1;
1235         if (qdepth > max_depth)
1236                 qdepth = max_depth;
1237         return scsi_change_queue_depth(sdev, qdepth);
1238 }
1239
1240 /**
1241  * scsih_target_alloc - target add routine
1242  * @starget: scsi target struct
1243  *
1244  * Returns 0 if ok. Any other return is assumed to be an error and
1245  * the device is ignored.
1246  */
1247 static int
1248 scsih_target_alloc(struct scsi_target *starget)
1249 {
1250         struct Scsi_Host *shost = dev_to_shost(&starget->dev);
1251         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
1252         struct MPT3SAS_TARGET *sas_target_priv_data;
1253         struct _sas_device *sas_device;
1254         struct _raid_device *raid_device;
1255         unsigned long flags;
1256         struct sas_rphy *rphy;
1257
1258         sas_target_priv_data = kzalloc(sizeof(*sas_target_priv_data),
1259                                        GFP_KERNEL);
1260         if (!sas_target_priv_data)
1261                 return -ENOMEM;
1262
1263         starget->hostdata = sas_target_priv_data;
1264         sas_target_priv_data->starget = starget;
1265         sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
1266
1267         /* RAID volumes */
1268         if (starget->channel == RAID_CHANNEL) {
1269                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1270                 raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
1271                     starget->channel);
1272                 if (raid_device) {
1273                         sas_target_priv_data->handle = raid_device->handle;
1274                         sas_target_priv_data->sas_address = raid_device->wwid;
1275                         sas_target_priv_data->flags |= MPT_TARGET_FLAGS_VOLUME;
1276                         if (ioc->is_warpdrive)
1277                                 sas_target_priv_data->raid_device = raid_device;
1278                         raid_device->starget = starget;
1279                 }
1280                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1281                 return 0;
1282         }
1283
1284         /* sas/sata devices */
1285         spin_lock_irqsave(&ioc->sas_device_lock, flags);
1286         rphy = dev_to_rphy(starget->dev.parent);
1287         sas_device = __mpt3sas_get_sdev_by_addr(ioc,
1288            rphy->identify.sas_address);
1289
1290         if (sas_device) {
1291                 sas_target_priv_data->handle = sas_device->handle;
1292                 sas_target_priv_data->sas_address = sas_device->sas_address;
1293                 sas_target_priv_data->sdev = sas_device;
1294                 sas_device->starget = starget;
1295                 sas_device->id = starget->id;
1296                 sas_device->channel = starget->channel;
1297                 if (test_bit(sas_device->handle, ioc->pd_handles))
1298                         sas_target_priv_data->flags |=
1299                             MPT_TARGET_FLAGS_RAID_COMPONENT;
1300                 if (sas_device->fast_path)
1301                         sas_target_priv_data->flags |= MPT_TARGET_FASTPATH_IO;
1302         }
1303         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1304
1305         return 0;
1306 }
1307
1308 /**
1309  * scsih_target_destroy - target destroy routine
1310  * @starget: scsi target struct
1311  *
1312  * Returns nothing.
1313  */
1314 static void
1315 scsih_target_destroy(struct scsi_target *starget)
1316 {
1317         struct Scsi_Host *shost = dev_to_shost(&starget->dev);
1318         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
1319         struct MPT3SAS_TARGET *sas_target_priv_data;
1320         struct _sas_device *sas_device;
1321         struct _raid_device *raid_device;
1322         unsigned long flags;
1323
1324         sas_target_priv_data = starget->hostdata;
1325         if (!sas_target_priv_data)
1326                 return;
1327
1328         if (starget->channel == RAID_CHANNEL) {
1329                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1330                 raid_device = _scsih_raid_device_find_by_id(ioc, starget->id,
1331                     starget->channel);
1332                 if (raid_device) {
1333                         raid_device->starget = NULL;
1334                         raid_device->sdev = NULL;
1335                 }
1336                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1337                 goto out;
1338         }
1339
1340         spin_lock_irqsave(&ioc->sas_device_lock, flags);
1341         sas_device = __mpt3sas_get_sdev_from_target(ioc, sas_target_priv_data);
1342         if (sas_device && (sas_device->starget == starget) &&
1343             (sas_device->id == starget->id) &&
1344             (sas_device->channel == starget->channel))
1345                 sas_device->starget = NULL;
1346
1347         if (sas_device) {
1348                 /*
1349                  * Corresponding get() is in _scsih_target_alloc()
1350                  */
1351                 sas_target_priv_data->sdev = NULL;
1352                 sas_device_put(sas_device);
1353
1354                 sas_device_put(sas_device);
1355         }
1356         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1357
1358  out:
1359         kfree(sas_target_priv_data);
1360         starget->hostdata = NULL;
1361 }
1362
1363 /**
1364  * scsih_slave_alloc - device add routine
1365  * @sdev: scsi device struct
1366  *
1367  * Returns 0 if ok. Any other return is assumed to be an error and
1368  * the device is ignored.
1369  */
1370 static int
1371 scsih_slave_alloc(struct scsi_device *sdev)
1372 {
1373         struct Scsi_Host *shost;
1374         struct MPT3SAS_ADAPTER *ioc;
1375         struct MPT3SAS_TARGET *sas_target_priv_data;
1376         struct MPT3SAS_DEVICE *sas_device_priv_data;
1377         struct scsi_target *starget;
1378         struct _raid_device *raid_device;
1379         struct _sas_device *sas_device;
1380         unsigned long flags;
1381
1382         sas_device_priv_data = kzalloc(sizeof(*sas_device_priv_data),
1383                                        GFP_KERNEL);
1384         if (!sas_device_priv_data)
1385                 return -ENOMEM;
1386
1387         sas_device_priv_data->lun = sdev->lun;
1388         sas_device_priv_data->flags = MPT_DEVICE_FLAGS_INIT;
1389
1390         starget = scsi_target(sdev);
1391         sas_target_priv_data = starget->hostdata;
1392         sas_target_priv_data->num_luns++;
1393         sas_device_priv_data->sas_target = sas_target_priv_data;
1394         sdev->hostdata = sas_device_priv_data;
1395         if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT))
1396                 sdev->no_uld_attach = 1;
1397
1398         shost = dev_to_shost(&starget->dev);
1399         ioc = shost_priv(shost);
1400         if (starget->channel == RAID_CHANNEL) {
1401                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1402                 raid_device = _scsih_raid_device_find_by_id(ioc,
1403                     starget->id, starget->channel);
1404                 if (raid_device)
1405                         raid_device->sdev = sdev; /* raid is single lun */
1406                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1407         }
1408
1409         if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
1410                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
1411                 sas_device = __mpt3sas_get_sdev_by_addr(ioc,
1412                                         sas_target_priv_data->sas_address);
1413                 if (sas_device && (sas_device->starget == NULL)) {
1414                         sdev_printk(KERN_INFO, sdev,
1415                         "%s : sas_device->starget set to starget @ %d\n",
1416                              __func__, __LINE__);
1417                         sas_device->starget = starget;
1418                 }
1419
1420                 if (sas_device)
1421                         sas_device_put(sas_device);
1422
1423                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1424         }
1425
1426         return 0;
1427 }
1428
1429 /**
1430  * scsih_slave_destroy - device destroy routine
1431  * @sdev: scsi device struct
1432  *
1433  * Returns nothing.
1434  */
1435 static void
1436 scsih_slave_destroy(struct scsi_device *sdev)
1437 {
1438         struct MPT3SAS_TARGET *sas_target_priv_data;
1439         struct scsi_target *starget;
1440         struct Scsi_Host *shost;
1441         struct MPT3SAS_ADAPTER *ioc;
1442         struct _sas_device *sas_device;
1443         unsigned long flags;
1444
1445         if (!sdev->hostdata)
1446                 return;
1447
1448         starget = scsi_target(sdev);
1449         sas_target_priv_data = starget->hostdata;
1450         sas_target_priv_data->num_luns--;
1451
1452         shost = dev_to_shost(&starget->dev);
1453         ioc = shost_priv(shost);
1454
1455         if (!(sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)) {
1456                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
1457                 sas_device = __mpt3sas_get_sdev_from_target(ioc,
1458                                 sas_target_priv_data);
1459                 if (sas_device && !sas_target_priv_data->num_luns)
1460                         sas_device->starget = NULL;
1461
1462                 if (sas_device)
1463                         sas_device_put(sas_device);
1464                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1465         }
1466
1467         kfree(sdev->hostdata);
1468         sdev->hostdata = NULL;
1469 }
1470
1471 /**
1472  * _scsih_display_sata_capabilities - sata capabilities
1473  * @ioc: per adapter object
1474  * @handle: device handle
1475  * @sdev: scsi device struct
1476  */
1477 static void
1478 _scsih_display_sata_capabilities(struct MPT3SAS_ADAPTER *ioc,
1479         u16 handle, struct scsi_device *sdev)
1480 {
1481         Mpi2ConfigReply_t mpi_reply;
1482         Mpi2SasDevicePage0_t sas_device_pg0;
1483         u32 ioc_status;
1484         u16 flags;
1485         u32 device_info;
1486
1487         if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
1488             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
1489                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
1490                     ioc->name, __FILE__, __LINE__, __func__);
1491                 return;
1492         }
1493
1494         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
1495             MPI2_IOCSTATUS_MASK;
1496         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
1497                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
1498                     ioc->name, __FILE__, __LINE__, __func__);
1499                 return;
1500         }
1501
1502         flags = le16_to_cpu(sas_device_pg0.Flags);
1503         device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
1504
1505         sdev_printk(KERN_INFO, sdev,
1506             "atapi(%s), ncq(%s), asyn_notify(%s), smart(%s), fua(%s), "
1507             "sw_preserve(%s)\n",
1508             (device_info & MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? "y" : "n",
1509             (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_NCQ_SUPPORTED) ? "y" : "n",
1510             (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_ASYNCHRONOUS_NOTIFY) ? "y" :
1511             "n",
1512             (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SMART_SUPPORTED) ? "y" : "n",
1513             (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_FUA_SUPPORTED) ? "y" : "n",
1514             (flags & MPI2_SAS_DEVICE0_FLAGS_SATA_SW_PRESERVE) ? "y" : "n");
1515 }
1516
1517 /*
1518  * raid transport support -
1519  * Enabled for SLES11 and newer, in older kernels the driver will panic when
1520  * unloading the driver followed by a load - I beleive that the subroutine
1521  * raid_class_release() is not cleaning up properly.
1522  */
1523
1524 /**
1525  * scsih_is_raid - return boolean indicating device is raid volume
1526  * @dev the device struct object
1527  */
1528 static int
1529 scsih_is_raid(struct device *dev)
1530 {
1531         struct scsi_device *sdev = to_scsi_device(dev);
1532         struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
1533
1534         if (ioc->is_warpdrive)
1535                 return 0;
1536         return (sdev->channel == RAID_CHANNEL) ? 1 : 0;
1537 }
1538
1539 /**
1540  * scsih_get_resync - get raid volume resync percent complete
1541  * @dev the device struct object
1542  */
1543 static void
1544 scsih_get_resync(struct device *dev)
1545 {
1546         struct scsi_device *sdev = to_scsi_device(dev);
1547         struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
1548         static struct _raid_device *raid_device;
1549         unsigned long flags;
1550         Mpi2RaidVolPage0_t vol_pg0;
1551         Mpi2ConfigReply_t mpi_reply;
1552         u32 volume_status_flags;
1553         u8 percent_complete;
1554         u16 handle;
1555
1556         percent_complete = 0;
1557         handle = 0;
1558         if (ioc->is_warpdrive)
1559                 goto out;
1560
1561         spin_lock_irqsave(&ioc->raid_device_lock, flags);
1562         raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
1563             sdev->channel);
1564         if (raid_device) {
1565                 handle = raid_device->handle;
1566                 percent_complete = raid_device->percent_complete;
1567         }
1568         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1569
1570         if (!handle)
1571                 goto out;
1572
1573         if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
1574              MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
1575              sizeof(Mpi2RaidVolPage0_t))) {
1576                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
1577                     ioc->name, __FILE__, __LINE__, __func__);
1578                 percent_complete = 0;
1579                 goto out;
1580         }
1581
1582         volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags);
1583         if (!(volume_status_flags &
1584             MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS))
1585                 percent_complete = 0;
1586
1587  out:
1588
1589         switch (ioc->hba_mpi_version_belonged) {
1590         case MPI2_VERSION:
1591                 raid_set_resync(mpt2sas_raid_template, dev, percent_complete);
1592                 break;
1593         case MPI25_VERSION:
1594         case MPI26_VERSION:
1595                 raid_set_resync(mpt3sas_raid_template, dev, percent_complete);
1596                 break;
1597         }
1598 }
1599
1600 /**
1601  * scsih_get_state - get raid volume level
1602  * @dev the device struct object
1603  */
1604 static void
1605 scsih_get_state(struct device *dev)
1606 {
1607         struct scsi_device *sdev = to_scsi_device(dev);
1608         struct MPT3SAS_ADAPTER *ioc = shost_priv(sdev->host);
1609         static struct _raid_device *raid_device;
1610         unsigned long flags;
1611         Mpi2RaidVolPage0_t vol_pg0;
1612         Mpi2ConfigReply_t mpi_reply;
1613         u32 volstate;
1614         enum raid_state state = RAID_STATE_UNKNOWN;
1615         u16 handle = 0;
1616
1617         spin_lock_irqsave(&ioc->raid_device_lock, flags);
1618         raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id,
1619             sdev->channel);
1620         if (raid_device)
1621                 handle = raid_device->handle;
1622         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1623
1624         if (!raid_device)
1625                 goto out;
1626
1627         if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0,
1628              MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
1629              sizeof(Mpi2RaidVolPage0_t))) {
1630                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
1631                     ioc->name, __FILE__, __LINE__, __func__);
1632                 goto out;
1633         }
1634
1635         volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags);
1636         if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) {
1637                 state = RAID_STATE_RESYNCING;
1638                 goto out;
1639         }
1640
1641         switch (vol_pg0.VolumeState) {
1642         case MPI2_RAID_VOL_STATE_OPTIMAL:
1643         case MPI2_RAID_VOL_STATE_ONLINE:
1644                 state = RAID_STATE_ACTIVE;
1645                 break;
1646         case  MPI2_RAID_VOL_STATE_DEGRADED:
1647                 state = RAID_STATE_DEGRADED;
1648                 break;
1649         case MPI2_RAID_VOL_STATE_FAILED:
1650         case MPI2_RAID_VOL_STATE_MISSING:
1651                 state = RAID_STATE_OFFLINE;
1652                 break;
1653         }
1654  out:
1655         switch (ioc->hba_mpi_version_belonged) {
1656         case MPI2_VERSION:
1657                 raid_set_state(mpt2sas_raid_template, dev, state);
1658                 break;
1659         case MPI25_VERSION:
1660         case MPI26_VERSION:
1661                 raid_set_state(mpt3sas_raid_template, dev, state);
1662                 break;
1663         }
1664 }
1665
1666 /**
1667  * _scsih_set_level - set raid level
1668  * @sdev: scsi device struct
1669  * @volume_type: volume type
1670  */
1671 static void
1672 _scsih_set_level(struct MPT3SAS_ADAPTER *ioc,
1673         struct scsi_device *sdev, u8 volume_type)
1674 {
1675         enum raid_level level = RAID_LEVEL_UNKNOWN;
1676
1677         switch (volume_type) {
1678         case MPI2_RAID_VOL_TYPE_RAID0:
1679                 level = RAID_LEVEL_0;
1680                 break;
1681         case MPI2_RAID_VOL_TYPE_RAID10:
1682                 level = RAID_LEVEL_10;
1683                 break;
1684         case MPI2_RAID_VOL_TYPE_RAID1E:
1685                 level = RAID_LEVEL_1E;
1686                 break;
1687         case MPI2_RAID_VOL_TYPE_RAID1:
1688                 level = RAID_LEVEL_1;
1689                 break;
1690         }
1691
1692         switch (ioc->hba_mpi_version_belonged) {
1693         case MPI2_VERSION:
1694                 raid_set_level(mpt2sas_raid_template,
1695                         &sdev->sdev_gendev, level);
1696                 break;
1697         case MPI25_VERSION:
1698         case MPI26_VERSION:
1699                 raid_set_level(mpt3sas_raid_template,
1700                         &sdev->sdev_gendev, level);
1701                 break;
1702         }
1703 }
1704
1705
1706 /**
1707  * _scsih_get_volume_capabilities - volume capabilities
1708  * @ioc: per adapter object
1709  * @sas_device: the raid_device object
1710  *
1711  * Returns 0 for success, else 1
1712  */
1713 static int
1714 _scsih_get_volume_capabilities(struct MPT3SAS_ADAPTER *ioc,
1715         struct _raid_device *raid_device)
1716 {
1717         Mpi2RaidVolPage0_t *vol_pg0;
1718         Mpi2RaidPhysDiskPage0_t pd_pg0;
1719         Mpi2SasDevicePage0_t sas_device_pg0;
1720         Mpi2ConfigReply_t mpi_reply;
1721         u16 sz;
1722         u8 num_pds;
1723
1724         if ((mpt3sas_config_get_number_pds(ioc, raid_device->handle,
1725             &num_pds)) || !num_pds) {
1726                 dfailprintk(ioc, pr_warn(MPT3SAS_FMT
1727                     "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
1728                     __func__));
1729                 return 1;
1730         }
1731
1732         raid_device->num_pds = num_pds;
1733         sz = offsetof(Mpi2RaidVolPage0_t, PhysDisk) + (num_pds *
1734             sizeof(Mpi2RaidVol0PhysDisk_t));
1735         vol_pg0 = kzalloc(sz, GFP_KERNEL);
1736         if (!vol_pg0) {
1737                 dfailprintk(ioc, pr_warn(MPT3SAS_FMT
1738                     "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
1739                     __func__));
1740                 return 1;
1741         }
1742
1743         if ((mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply, vol_pg0,
1744              MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, sz))) {
1745                 dfailprintk(ioc, pr_warn(MPT3SAS_FMT
1746                     "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
1747                     __func__));
1748                 kfree(vol_pg0);
1749                 return 1;
1750         }
1751
1752         raid_device->volume_type = vol_pg0->VolumeType;
1753
1754         /* figure out what the underlying devices are by
1755          * obtaining the device_info bits for the 1st device
1756          */
1757         if (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
1758             &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_PHYSDISKNUM,
1759             vol_pg0->PhysDisk[0].PhysDiskNum))) {
1760                 if (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
1761                     &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
1762                     le16_to_cpu(pd_pg0.DevHandle)))) {
1763                         raid_device->device_info =
1764                             le32_to_cpu(sas_device_pg0.DeviceInfo);
1765                 }
1766         }
1767
1768         kfree(vol_pg0);
1769         return 0;
1770 }
1771
1772 /**
1773  * _scsih_enable_tlr - setting TLR flags
1774  * @ioc: per adapter object
1775  * @sdev: scsi device struct
1776  *
1777  * Enabling Transaction Layer Retries for tape devices when
1778  * vpd page 0x90 is present
1779  *
1780  */
1781 static void
1782 _scsih_enable_tlr(struct MPT3SAS_ADAPTER *ioc, struct scsi_device *sdev)
1783 {
1784
1785         /* only for TAPE */
1786         if (sdev->type != TYPE_TAPE)
1787                 return;
1788
1789         if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR))
1790                 return;
1791
1792         sas_enable_tlr(sdev);
1793         sdev_printk(KERN_INFO, sdev, "TLR %s\n",
1794             sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled");
1795         return;
1796
1797 }
1798
1799 /**
1800  * scsih_slave_configure - device configure routine.
1801  * @sdev: scsi device struct
1802  *
1803  * Returns 0 if ok. Any other return is assumed to be an error and
1804  * the device is ignored.
1805  */
1806 static int
1807 scsih_slave_configure(struct scsi_device *sdev)
1808 {
1809         struct Scsi_Host *shost = sdev->host;
1810         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
1811         struct MPT3SAS_DEVICE *sas_device_priv_data;
1812         struct MPT3SAS_TARGET *sas_target_priv_data;
1813         struct _sas_device *sas_device;
1814         struct _raid_device *raid_device;
1815         unsigned long flags;
1816         int qdepth;
1817         u8 ssp_target = 0;
1818         char *ds = "";
1819         char *r_level = "";
1820         u16 handle, volume_handle = 0;
1821         u64 volume_wwid = 0;
1822
1823         qdepth = 1;
1824         sas_device_priv_data = sdev->hostdata;
1825         sas_device_priv_data->configured_lun = 1;
1826         sas_device_priv_data->flags &= ~MPT_DEVICE_FLAGS_INIT;
1827         sas_target_priv_data = sas_device_priv_data->sas_target;
1828         handle = sas_target_priv_data->handle;
1829
1830         /* raid volume handling */
1831         if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME) {
1832
1833                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
1834                 raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
1835                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
1836                 if (!raid_device) {
1837                         dfailprintk(ioc, pr_warn(MPT3SAS_FMT
1838                             "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
1839                             __LINE__, __func__));
1840                         return 1;
1841                 }
1842
1843                 if (_scsih_get_volume_capabilities(ioc, raid_device)) {
1844                         dfailprintk(ioc, pr_warn(MPT3SAS_FMT
1845                             "failure at %s:%d/%s()!\n", ioc->name, __FILE__,
1846                             __LINE__, __func__));
1847                         return 1;
1848                 }
1849
1850                 /*
1851                  * WARPDRIVE: Initialize the required data for Direct IO
1852                  */
1853                 mpt3sas_init_warpdrive_properties(ioc, raid_device);
1854
1855                 /* RAID Queue Depth Support
1856                  * IS volume = underlying qdepth of drive type, either
1857                  *    MPT3SAS_SAS_QUEUE_DEPTH or MPT3SAS_SATA_QUEUE_DEPTH
1858                  * IM/IME/R10 = 128 (MPT3SAS_RAID_QUEUE_DEPTH)
1859                  */
1860                 if (raid_device->device_info &
1861                     MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
1862                         qdepth = MPT3SAS_SAS_QUEUE_DEPTH;
1863                         ds = "SSP";
1864                 } else {
1865                         qdepth = MPT3SAS_SATA_QUEUE_DEPTH;
1866                          if (raid_device->device_info &
1867                             MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
1868                                 ds = "SATA";
1869                         else
1870                                 ds = "STP";
1871                 }
1872
1873                 switch (raid_device->volume_type) {
1874                 case MPI2_RAID_VOL_TYPE_RAID0:
1875                         r_level = "RAID0";
1876                         break;
1877                 case MPI2_RAID_VOL_TYPE_RAID1E:
1878                         qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
1879                         if (ioc->manu_pg10.OEMIdentifier &&
1880                             (le32_to_cpu(ioc->manu_pg10.GenericFlags0) &
1881                             MFG10_GF0_R10_DISPLAY) &&
1882                             !(raid_device->num_pds % 2))
1883                                 r_level = "RAID10";
1884                         else
1885                                 r_level = "RAID1E";
1886                         break;
1887                 case MPI2_RAID_VOL_TYPE_RAID1:
1888                         qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
1889                         r_level = "RAID1";
1890                         break;
1891                 case MPI2_RAID_VOL_TYPE_RAID10:
1892                         qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
1893                         r_level = "RAID10";
1894                         break;
1895                 case MPI2_RAID_VOL_TYPE_UNKNOWN:
1896                 default:
1897                         qdepth = MPT3SAS_RAID_QUEUE_DEPTH;
1898                         r_level = "RAIDX";
1899                         break;
1900                 }
1901
1902                 if (!ioc->hide_ir_msg)
1903                         sdev_printk(KERN_INFO, sdev,
1904                            "%s: handle(0x%04x), wwid(0x%016llx),"
1905                             " pd_count(%d), type(%s)\n",
1906                             r_level, raid_device->handle,
1907                             (unsigned long long)raid_device->wwid,
1908                             raid_device->num_pds, ds);
1909
1910                 if (shost->max_sectors > MPT3SAS_RAID_MAX_SECTORS) {
1911                         blk_queue_max_hw_sectors(sdev->request_queue,
1912                                                 MPT3SAS_RAID_MAX_SECTORS);
1913                         sdev_printk(KERN_INFO, sdev,
1914                                         "Set queue's max_sector to: %u\n",
1915                                                 MPT3SAS_RAID_MAX_SECTORS);
1916                 }
1917
1918                 scsih_change_queue_depth(sdev, qdepth);
1919
1920                 /* raid transport support */
1921                 if (!ioc->is_warpdrive)
1922                         _scsih_set_level(ioc, sdev, raid_device->volume_type);
1923                 return 0;
1924         }
1925
1926         /* non-raid handling */
1927         if (sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) {
1928                 if (mpt3sas_config_get_volume_handle(ioc, handle,
1929                     &volume_handle)) {
1930                         dfailprintk(ioc, pr_warn(MPT3SAS_FMT
1931                             "failure at %s:%d/%s()!\n", ioc->name,
1932                             __FILE__, __LINE__, __func__));
1933                         return 1;
1934                 }
1935                 if (volume_handle && mpt3sas_config_get_volume_wwid(ioc,
1936                     volume_handle, &volume_wwid)) {
1937                         dfailprintk(ioc, pr_warn(MPT3SAS_FMT
1938                             "failure at %s:%d/%s()!\n", ioc->name,
1939                             __FILE__, __LINE__, __func__));
1940                         return 1;
1941                 }
1942         }
1943
1944         spin_lock_irqsave(&ioc->sas_device_lock, flags);
1945         sas_device = __mpt3sas_get_sdev_by_addr(ioc,
1946            sas_device_priv_data->sas_target->sas_address);
1947         if (!sas_device) {
1948                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1949                 dfailprintk(ioc, pr_warn(MPT3SAS_FMT
1950                     "failure at %s:%d/%s()!\n", ioc->name, __FILE__, __LINE__,
1951                     __func__));
1952                 return 1;
1953         }
1954
1955         sas_device->volume_handle = volume_handle;
1956         sas_device->volume_wwid = volume_wwid;
1957         if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_SSP_TARGET) {
1958                 qdepth = MPT3SAS_SAS_QUEUE_DEPTH;
1959                 ssp_target = 1;
1960                 if (sas_device->device_info &
1961                                 MPI2_SAS_DEVICE_INFO_SEP) {
1962                         sdev_printk(KERN_WARNING, sdev,
1963                         "set ignore_delay_remove for handle(0x%04x)\n",
1964                         sas_device_priv_data->sas_target->handle);
1965                         sas_device_priv_data->ignore_delay_remove = 1;
1966                         ds = "SES";
1967                 } else
1968                         ds = "SSP";
1969         } else {
1970                 qdepth = MPT3SAS_SATA_QUEUE_DEPTH;
1971                 if (sas_device->device_info & MPI2_SAS_DEVICE_INFO_STP_TARGET)
1972                         ds = "STP";
1973                 else if (sas_device->device_info &
1974                     MPI2_SAS_DEVICE_INFO_SATA_DEVICE)
1975                         ds = "SATA";
1976         }
1977
1978         sdev_printk(KERN_INFO, sdev, "%s: handle(0x%04x), " \
1979             "sas_addr(0x%016llx), phy(%d), device_name(0x%016llx)\n",
1980             ds, handle, (unsigned long long)sas_device->sas_address,
1981             sas_device->phy, (unsigned long long)sas_device->device_name);
1982         if (sas_device->enclosure_handle != 0)
1983                 sdev_printk(KERN_INFO, sdev,
1984                      "%s: enclosure_logical_id(0x%016llx), slot(%d)\n",
1985                      ds, (unsigned long long)
1986                      sas_device->enclosure_logical_id, sas_device->slot);
1987         if (sas_device->connector_name[0] != '\0')
1988                 sdev_printk(KERN_INFO, sdev,
1989                      "%s: enclosure level(0x%04x), connector name( %s)\n",
1990                      ds, sas_device->enclosure_level,
1991                      sas_device->connector_name);
1992
1993         sas_device_put(sas_device);
1994         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
1995
1996         if (!ssp_target)
1997                 _scsih_display_sata_capabilities(ioc, handle, sdev);
1998
1999
2000         scsih_change_queue_depth(sdev, qdepth);
2001
2002         if (ssp_target) {
2003                 sas_read_port_mode_page(sdev);
2004                 _scsih_enable_tlr(ioc, sdev);
2005         }
2006
2007         return 0;
2008 }
2009
2010 /**
2011  * scsih_bios_param - fetch head, sector, cylinder info for a disk
2012  * @sdev: scsi device struct
2013  * @bdev: pointer to block device context
2014  * @capacity: device size (in 512 byte sectors)
2015  * @params: three element array to place output:
2016  *              params[0] number of heads (max 255)
2017  *              params[1] number of sectors (max 63)
2018  *              params[2] number of cylinders
2019  *
2020  * Return nothing.
2021  */
2022 static int
2023 scsih_bios_param(struct scsi_device *sdev, struct block_device *bdev,
2024         sector_t capacity, int params[])
2025 {
2026         int             heads;
2027         int             sectors;
2028         sector_t        cylinders;
2029         ulong           dummy;
2030
2031         heads = 64;
2032         sectors = 32;
2033
2034         dummy = heads * sectors;
2035         cylinders = capacity;
2036         sector_div(cylinders, dummy);
2037
2038         /*
2039          * Handle extended translation size for logical drives
2040          * > 1Gb
2041          */
2042         if ((ulong)capacity >= 0x200000) {
2043                 heads = 255;
2044                 sectors = 63;
2045                 dummy = heads * sectors;
2046                 cylinders = capacity;
2047                 sector_div(cylinders, dummy);
2048         }
2049
2050         /* return result */
2051         params[0] = heads;
2052         params[1] = sectors;
2053         params[2] = cylinders;
2054
2055         return 0;
2056 }
2057
2058 /**
2059  * _scsih_response_code - translation of device response code
2060  * @ioc: per adapter object
2061  * @response_code: response code returned by the device
2062  *
2063  * Return nothing.
2064  */
2065 static void
2066 _scsih_response_code(struct MPT3SAS_ADAPTER *ioc, u8 response_code)
2067 {
2068         char *desc;
2069
2070         switch (response_code) {
2071         case MPI2_SCSITASKMGMT_RSP_TM_COMPLETE:
2072                 desc = "task management request completed";
2073                 break;
2074         case MPI2_SCSITASKMGMT_RSP_INVALID_FRAME:
2075                 desc = "invalid frame";
2076                 break;
2077         case MPI2_SCSITASKMGMT_RSP_TM_NOT_SUPPORTED:
2078                 desc = "task management request not supported";
2079                 break;
2080         case MPI2_SCSITASKMGMT_RSP_TM_FAILED:
2081                 desc = "task management request failed";
2082                 break;
2083         case MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED:
2084                 desc = "task management request succeeded";
2085                 break;
2086         case MPI2_SCSITASKMGMT_RSP_TM_INVALID_LUN:
2087                 desc = "invalid lun";
2088                 break;
2089         case 0xA:
2090                 desc = "overlapped tag attempted";
2091                 break;
2092         case MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC:
2093                 desc = "task queued, however not sent to target";
2094                 break;
2095         default:
2096                 desc = "unknown";
2097                 break;
2098         }
2099         pr_warn(MPT3SAS_FMT "response_code(0x%01x): %s\n",
2100                 ioc->name, response_code, desc);
2101 }
2102
2103 /**
2104  * _scsih_tm_done - tm completion routine
2105  * @ioc: per adapter object
2106  * @smid: system request message index
2107  * @msix_index: MSIX table index supplied by the OS
2108  * @reply: reply message frame(lower 32bit addr)
2109  * Context: none.
2110  *
2111  * The callback handler when using scsih_issue_tm.
2112  *
2113  * Return 1 meaning mf should be freed from _base_interrupt
2114  *        0 means the mf is freed from this function.
2115  */
2116 static u8
2117 _scsih_tm_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
2118 {
2119         MPI2DefaultReply_t *mpi_reply;
2120
2121         if (ioc->tm_cmds.status == MPT3_CMD_NOT_USED)
2122                 return 1;
2123         if (ioc->tm_cmds.smid != smid)
2124                 return 1;
2125         ioc->tm_cmds.status |= MPT3_CMD_COMPLETE;
2126         mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
2127         if (mpi_reply) {
2128                 memcpy(ioc->tm_cmds.reply, mpi_reply, mpi_reply->MsgLength*4);
2129                 ioc->tm_cmds.status |= MPT3_CMD_REPLY_VALID;
2130         }
2131         ioc->tm_cmds.status &= ~MPT3_CMD_PENDING;
2132         complete(&ioc->tm_cmds.done);
2133         return 1;
2134 }
2135
2136 /**
2137  * mpt3sas_scsih_set_tm_flag - set per target tm_busy
2138  * @ioc: per adapter object
2139  * @handle: device handle
2140  *
2141  * During taskmangement request, we need to freeze the device queue.
2142  */
2143 void
2144 mpt3sas_scsih_set_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
2145 {
2146         struct MPT3SAS_DEVICE *sas_device_priv_data;
2147         struct scsi_device *sdev;
2148         u8 skip = 0;
2149
2150         shost_for_each_device(sdev, ioc->shost) {
2151                 if (skip)
2152                         continue;
2153                 sas_device_priv_data = sdev->hostdata;
2154                 if (!sas_device_priv_data)
2155                         continue;
2156                 if (sas_device_priv_data->sas_target->handle == handle) {
2157                         sas_device_priv_data->sas_target->tm_busy = 1;
2158                         skip = 1;
2159                         ioc->ignore_loginfos = 1;
2160                 }
2161         }
2162 }
2163
2164 /**
2165  * mpt3sas_scsih_clear_tm_flag - clear per target tm_busy
2166  * @ioc: per adapter object
2167  * @handle: device handle
2168  *
2169  * During taskmangement request, we need to freeze the device queue.
2170  */
2171 void
2172 mpt3sas_scsih_clear_tm_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
2173 {
2174         struct MPT3SAS_DEVICE *sas_device_priv_data;
2175         struct scsi_device *sdev;
2176         u8 skip = 0;
2177
2178         shost_for_each_device(sdev, ioc->shost) {
2179                 if (skip)
2180                         continue;
2181                 sas_device_priv_data = sdev->hostdata;
2182                 if (!sas_device_priv_data)
2183                         continue;
2184                 if (sas_device_priv_data->sas_target->handle == handle) {
2185                         sas_device_priv_data->sas_target->tm_busy = 0;
2186                         skip = 1;
2187                         ioc->ignore_loginfos = 0;
2188                 }
2189         }
2190 }
2191
2192 /**
2193  * mpt3sas_scsih_issue_tm - main routine for sending tm requests
2194  * @ioc: per adapter struct
2195  * @device_handle: device handle
2196  * @channel: the channel assigned by the OS
2197  * @id: the id assigned by the OS
2198  * @lun: lun number
2199  * @type: MPI2_SCSITASKMGMT_TASKTYPE__XXX (defined in mpi2_init.h)
2200  * @smid_task: smid assigned to the task
2201  * @timeout: timeout in seconds
2202  * Context: user
2203  *
2204  * A generic API for sending task management requests to firmware.
2205  *
2206  * The callback index is set inside `ioc->tm_cb_idx`.
2207  *
2208  * Return SUCCESS or FAILED.
2209  */
2210 int
2211 mpt3sas_scsih_issue_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle, uint channel,
2212         uint id, uint lun, u8 type, u16 smid_task, ulong timeout)
2213 {
2214         Mpi2SCSITaskManagementRequest_t *mpi_request;
2215         Mpi2SCSITaskManagementReply_t *mpi_reply;
2216         u16 smid = 0;
2217         u32 ioc_state;
2218         struct scsiio_tracker *scsi_lookup = NULL;
2219         int rc;
2220         u16 msix_task = 0;
2221
2222         lockdep_assert_held(&ioc->tm_cmds.mutex);
2223
2224         if (ioc->tm_cmds.status != MPT3_CMD_NOT_USED) {
2225                 pr_info(MPT3SAS_FMT "%s: tm_cmd busy!!!\n",
2226                     __func__, ioc->name);
2227                 return FAILED;
2228         }
2229
2230         if (ioc->shost_recovery || ioc->remove_host ||
2231             ioc->pci_error_recovery) {
2232                 pr_info(MPT3SAS_FMT "%s: host reset in progress!\n",
2233                     __func__, ioc->name);
2234                 return FAILED;
2235         }
2236
2237         ioc_state = mpt3sas_base_get_iocstate(ioc, 0);
2238         if (ioc_state & MPI2_DOORBELL_USED) {
2239                 dhsprintk(ioc, pr_info(MPT3SAS_FMT
2240                         "unexpected doorbell active!\n", ioc->name));
2241                 rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
2242                 return (!rc) ? SUCCESS : FAILED;
2243         }
2244
2245         if ((ioc_state & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT) {
2246                 mpt3sas_base_fault_info(ioc, ioc_state &
2247                     MPI2_DOORBELL_DATA_MASK);
2248                 rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
2249                 return (!rc) ? SUCCESS : FAILED;
2250         }
2251
2252         smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_cb_idx);
2253         if (!smid) {
2254                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
2255                     ioc->name, __func__);
2256                 return FAILED;
2257         }
2258
2259         if (type == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK)
2260                 scsi_lookup = &ioc->scsi_lookup[smid_task - 1];
2261
2262         dtmprintk(ioc, pr_info(MPT3SAS_FMT
2263                 "sending tm: handle(0x%04x), task_type(0x%02x), smid(%d)\n",
2264                 ioc->name, handle, type, smid_task));
2265         ioc->tm_cmds.status = MPT3_CMD_PENDING;
2266         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
2267         ioc->tm_cmds.smid = smid;
2268         memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
2269         memset(ioc->tm_cmds.reply, 0, sizeof(Mpi2SCSITaskManagementReply_t));
2270         mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
2271         mpi_request->DevHandle = cpu_to_le16(handle);
2272         mpi_request->TaskType = type;
2273         mpi_request->TaskMID = cpu_to_le16(smid_task);
2274         int_to_scsilun(lun, (struct scsi_lun *)mpi_request->LUN);
2275         mpt3sas_scsih_set_tm_flag(ioc, handle);
2276         init_completion(&ioc->tm_cmds.done);
2277         if ((type == MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) &&
2278                         (scsi_lookup->msix_io < ioc->reply_queue_count))
2279                 msix_task = scsi_lookup->msix_io;
2280         else
2281                 msix_task = 0;
2282         mpt3sas_base_put_smid_hi_priority(ioc, smid, msix_task);
2283         wait_for_completion_timeout(&ioc->tm_cmds.done, timeout*HZ);
2284         if (!(ioc->tm_cmds.status & MPT3_CMD_COMPLETE)) {
2285                 pr_err(MPT3SAS_FMT "%s: timeout\n",
2286                     ioc->name, __func__);
2287                 _debug_dump_mf(mpi_request,
2288                     sizeof(Mpi2SCSITaskManagementRequest_t)/4);
2289                 if (!(ioc->tm_cmds.status & MPT3_CMD_RESET)) {
2290                         rc = mpt3sas_base_hard_reset_handler(ioc,
2291                                         FORCE_BIG_HAMMER);
2292                         rc = (!rc) ? SUCCESS : FAILED;
2293                         goto out;
2294                 }
2295         }
2296
2297         /* sync IRQs in case those were busy during flush. */
2298         mpt3sas_base_sync_reply_irqs(ioc);
2299
2300         if (ioc->tm_cmds.status & MPT3_CMD_REPLY_VALID) {
2301                 mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
2302                 mpi_reply = ioc->tm_cmds.reply;
2303                 dtmprintk(ioc, pr_info(MPT3SAS_FMT "complete tm: " \
2304                     "ioc_status(0x%04x), loginfo(0x%08x), term_count(0x%08x)\n",
2305                     ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
2306                     le32_to_cpu(mpi_reply->IOCLogInfo),
2307                     le32_to_cpu(mpi_reply->TerminationCount)));
2308                 if (ioc->logging_level & MPT_DEBUG_TM) {
2309                         _scsih_response_code(ioc, mpi_reply->ResponseCode);
2310                         if (mpi_reply->IOCStatus)
2311                                 _debug_dump_mf(mpi_request,
2312                                     sizeof(Mpi2SCSITaskManagementRequest_t)/4);
2313                 }
2314         }
2315
2316         switch (type) {
2317         case MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK:
2318                 rc = SUCCESS;
2319                 if (scsi_lookup->scmd == NULL)
2320                         break;
2321                 rc = FAILED;
2322                 break;
2323
2324         case MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET:
2325                 if (_scsih_scsi_lookup_find_by_target(ioc, id, channel))
2326                         rc = FAILED;
2327                 else
2328                         rc = SUCCESS;
2329                 break;
2330         case MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET:
2331         case MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET:
2332                 if (_scsih_scsi_lookup_find_by_lun(ioc, id, lun, channel))
2333                         rc = FAILED;
2334                 else
2335                         rc = SUCCESS;
2336                 break;
2337         case MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK:
2338                 rc = SUCCESS;
2339                 break;
2340         default:
2341                 rc = FAILED;
2342                 break;
2343         }
2344
2345 out:
2346         mpt3sas_scsih_clear_tm_flag(ioc, handle);
2347         ioc->tm_cmds.status = MPT3_CMD_NOT_USED;
2348         return rc;
2349 }
2350
2351 int mpt3sas_scsih_issue_locked_tm(struct MPT3SAS_ADAPTER *ioc, u16 handle,
2352         uint channel, uint id, uint lun, u8 type, u16 smid_task, ulong timeout)
2353 {
2354         int ret;
2355
2356         mutex_lock(&ioc->tm_cmds.mutex);
2357         ret = mpt3sas_scsih_issue_tm(ioc, handle, channel, id, lun, type,
2358                         smid_task, timeout);
2359         mutex_unlock(&ioc->tm_cmds.mutex);
2360
2361         return ret;
2362 }
2363
2364 /**
2365  * _scsih_tm_display_info - displays info about the device
2366  * @ioc: per adapter struct
2367  * @scmd: pointer to scsi command object
2368  *
2369  * Called by task management callback handlers.
2370  */
2371 static void
2372 _scsih_tm_display_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd)
2373 {
2374         struct scsi_target *starget = scmd->device->sdev_target;
2375         struct MPT3SAS_TARGET *priv_target = starget->hostdata;
2376         struct _sas_device *sas_device = NULL;
2377         unsigned long flags;
2378         char *device_str = NULL;
2379
2380         if (!priv_target)
2381                 return;
2382         if (ioc->hide_ir_msg)
2383                 device_str = "WarpDrive";
2384         else
2385                 device_str = "volume";
2386
2387         scsi_print_command(scmd);
2388         if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
2389                 starget_printk(KERN_INFO, starget,
2390                         "%s handle(0x%04x), %s wwid(0x%016llx)\n",
2391                         device_str, priv_target->handle,
2392                     device_str, (unsigned long long)priv_target->sas_address);
2393         } else {
2394                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
2395                 sas_device = __mpt3sas_get_sdev_from_target(ioc, priv_target);
2396                 if (sas_device) {
2397                         if (priv_target->flags &
2398                             MPT_TARGET_FLAGS_RAID_COMPONENT) {
2399                                 starget_printk(KERN_INFO, starget,
2400                                     "volume handle(0x%04x), "
2401                                     "volume wwid(0x%016llx)\n",
2402                                     sas_device->volume_handle,
2403                                    (unsigned long long)sas_device->volume_wwid);
2404                         }
2405                         starget_printk(KERN_INFO, starget,
2406                             "handle(0x%04x), sas_address(0x%016llx), phy(%d)\n",
2407                             sas_device->handle,
2408                             (unsigned long long)sas_device->sas_address,
2409                             sas_device->phy);
2410                         if (sas_device->enclosure_handle != 0)
2411                                 starget_printk(KERN_INFO, starget,
2412                                  "enclosure_logical_id(0x%016llx), slot(%d)\n",
2413                                  (unsigned long long)
2414                                  sas_device->enclosure_logical_id,
2415                                  sas_device->slot);
2416                         if (sas_device->connector_name[0] != '\0')
2417                                 starget_printk(KERN_INFO, starget,
2418                                 "enclosure level(0x%04x),connector name(%s)\n",
2419                                  sas_device->enclosure_level,
2420                                  sas_device->connector_name);
2421
2422                         sas_device_put(sas_device);
2423                 }
2424                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
2425         }
2426 }
2427
2428 /**
2429  * scsih_abort - eh threads main abort routine
2430  * @scmd: pointer to scsi command object
2431  *
2432  * Returns SUCCESS if command aborted else FAILED
2433  */
2434 static int
2435 scsih_abort(struct scsi_cmnd *scmd)
2436 {
2437         struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2438         struct MPT3SAS_DEVICE *sas_device_priv_data;
2439         u16 smid;
2440         u16 handle;
2441         int r;
2442
2443         sdev_printk(KERN_INFO, scmd->device,
2444                 "attempting task abort! scmd(%p)\n", scmd);
2445         _scsih_tm_display_info(ioc, scmd);
2446
2447         sas_device_priv_data = scmd->device->hostdata;
2448         if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
2449                 sdev_printk(KERN_INFO, scmd->device,
2450                         "device been deleted! scmd(%p)\n", scmd);
2451                 scmd->result = DID_NO_CONNECT << 16;
2452                 scmd->scsi_done(scmd);
2453                 r = SUCCESS;
2454                 goto out;
2455         }
2456
2457         /* search for the command */
2458         smid = _scsih_scsi_lookup_find_by_scmd(ioc, scmd);
2459         if (!smid) {
2460                 scmd->result = DID_RESET << 16;
2461                 r = SUCCESS;
2462                 goto out;
2463         }
2464
2465         /* for hidden raid components and volumes this is not supported */
2466         if (sas_device_priv_data->sas_target->flags &
2467             MPT_TARGET_FLAGS_RAID_COMPONENT ||
2468             sas_device_priv_data->sas_target->flags & MPT_TARGET_FLAGS_VOLUME) {
2469                 scmd->result = DID_RESET << 16;
2470                 r = FAILED;
2471                 goto out;
2472         }
2473
2474         mpt3sas_halt_firmware(ioc);
2475
2476         handle = sas_device_priv_data->sas_target->handle;
2477         r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->channel,
2478             scmd->device->id, scmd->device->lun,
2479             MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid, 30);
2480
2481  out:
2482         sdev_printk(KERN_INFO, scmd->device, "task abort: %s scmd(%p)\n",
2483             ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2484         return r;
2485 }
2486
2487 /**
2488  * scsih_dev_reset - eh threads main device reset routine
2489  * @scmd: pointer to scsi command object
2490  *
2491  * Returns SUCCESS if command aborted else FAILED
2492  */
2493 static int
2494 scsih_dev_reset(struct scsi_cmnd *scmd)
2495 {
2496         struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2497         struct MPT3SAS_DEVICE *sas_device_priv_data;
2498         struct _sas_device *sas_device = NULL;
2499         u16     handle;
2500         int r;
2501
2502         struct scsi_target *starget = scmd->device->sdev_target;
2503         struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
2504
2505         sdev_printk(KERN_INFO, scmd->device,
2506                 "attempting device reset! scmd(%p)\n", scmd);
2507         _scsih_tm_display_info(ioc, scmd);
2508
2509         sas_device_priv_data = scmd->device->hostdata;
2510         if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
2511                 sdev_printk(KERN_INFO, scmd->device,
2512                         "device been deleted! scmd(%p)\n", scmd);
2513                 scmd->result = DID_NO_CONNECT << 16;
2514                 scmd->scsi_done(scmd);
2515                 r = SUCCESS;
2516                 goto out;
2517         }
2518
2519         /* for hidden raid components obtain the volume_handle */
2520         handle = 0;
2521         if (sas_device_priv_data->sas_target->flags &
2522             MPT_TARGET_FLAGS_RAID_COMPONENT) {
2523                 sas_device = mpt3sas_get_sdev_from_target(ioc,
2524                                 target_priv_data);
2525                 if (sas_device)
2526                         handle = sas_device->volume_handle;
2527         } else
2528                 handle = sas_device_priv_data->sas_target->handle;
2529
2530         if (!handle) {
2531                 scmd->result = DID_RESET << 16;
2532                 r = FAILED;
2533                 goto out;
2534         }
2535
2536         r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->channel,
2537             scmd->device->id, scmd->device->lun,
2538             MPI2_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET, 0, 30);
2539
2540  out:
2541         sdev_printk(KERN_INFO, scmd->device, "device reset: %s scmd(%p)\n",
2542             ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2543
2544         if (sas_device)
2545                 sas_device_put(sas_device);
2546
2547         return r;
2548 }
2549
2550 /**
2551  * scsih_target_reset - eh threads main target reset routine
2552  * @scmd: pointer to scsi command object
2553  *
2554  * Returns SUCCESS if command aborted else FAILED
2555  */
2556 static int
2557 scsih_target_reset(struct scsi_cmnd *scmd)
2558 {
2559         struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2560         struct MPT3SAS_DEVICE *sas_device_priv_data;
2561         struct _sas_device *sas_device = NULL;
2562         u16     handle;
2563         int r;
2564         struct scsi_target *starget = scmd->device->sdev_target;
2565         struct MPT3SAS_TARGET *target_priv_data = starget->hostdata;
2566
2567         starget_printk(KERN_INFO, starget, "attempting target reset! scmd(%p)\n",
2568                 scmd);
2569         _scsih_tm_display_info(ioc, scmd);
2570
2571         sas_device_priv_data = scmd->device->hostdata;
2572         if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
2573                 starget_printk(KERN_INFO, starget, "target been deleted! scmd(%p)\n",
2574                         scmd);
2575                 scmd->result = DID_NO_CONNECT << 16;
2576                 scmd->scsi_done(scmd);
2577                 r = SUCCESS;
2578                 goto out;
2579         }
2580
2581         /* for hidden raid components obtain the volume_handle */
2582         handle = 0;
2583         if (sas_device_priv_data->sas_target->flags &
2584             MPT_TARGET_FLAGS_RAID_COMPONENT) {
2585                 sas_device = mpt3sas_get_sdev_from_target(ioc,
2586                                 target_priv_data);
2587                 if (sas_device)
2588                         handle = sas_device->volume_handle;
2589         } else
2590                 handle = sas_device_priv_data->sas_target->handle;
2591
2592         if (!handle) {
2593                 scmd->result = DID_RESET << 16;
2594                 r = FAILED;
2595                 goto out;
2596         }
2597
2598         r = mpt3sas_scsih_issue_locked_tm(ioc, handle, scmd->device->channel,
2599             scmd->device->id, 0, MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET, 0,
2600             30);
2601
2602  out:
2603         starget_printk(KERN_INFO, starget, "target reset: %s scmd(%p)\n",
2604             ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2605
2606         if (sas_device)
2607                 sas_device_put(sas_device);
2608
2609         return r;
2610 }
2611
2612
2613 /**
2614  * scsih_host_reset - eh threads main host reset routine
2615  * @scmd: pointer to scsi command object
2616  *
2617  * Returns SUCCESS if command aborted else FAILED
2618  */
2619 static int
2620 scsih_host_reset(struct scsi_cmnd *scmd)
2621 {
2622         struct MPT3SAS_ADAPTER *ioc = shost_priv(scmd->device->host);
2623         int r, retval;
2624
2625         pr_info(MPT3SAS_FMT "attempting host reset! scmd(%p)\n",
2626             ioc->name, scmd);
2627         scsi_print_command(scmd);
2628
2629         if (ioc->is_driver_loading) {
2630                 pr_info(MPT3SAS_FMT "Blocking the host reset\n",
2631                     ioc->name);
2632                 r = FAILED;
2633                 goto out;
2634         }
2635
2636         retval = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
2637         r = (retval < 0) ? FAILED : SUCCESS;
2638 out:
2639         pr_info(MPT3SAS_FMT "host reset: %s scmd(%p)\n",
2640             ioc->name, ((r == SUCCESS) ? "SUCCESS" : "FAILED"), scmd);
2641
2642         return r;
2643 }
2644
2645 /**
2646  * _scsih_fw_event_add - insert and queue up fw_event
2647  * @ioc: per adapter object
2648  * @fw_event: object describing the event
2649  * Context: This function will acquire ioc->fw_event_lock.
2650  *
2651  * This adds the firmware event object into link list, then queues it up to
2652  * be processed from user context.
2653  *
2654  * Return nothing.
2655  */
2656 static void
2657 _scsih_fw_event_add(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
2658 {
2659         unsigned long flags;
2660
2661         if (ioc->firmware_event_thread == NULL)
2662                 return;
2663
2664         spin_lock_irqsave(&ioc->fw_event_lock, flags);
2665         fw_event_work_get(fw_event);
2666         INIT_LIST_HEAD(&fw_event->list);
2667         list_add_tail(&fw_event->list, &ioc->fw_event_list);
2668         INIT_WORK(&fw_event->work, _firmware_event_work);
2669         fw_event_work_get(fw_event);
2670         queue_work(ioc->firmware_event_thread, &fw_event->work);
2671         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2672 }
2673
2674 /**
2675  * _scsih_fw_event_del_from_list - delete fw_event from the list
2676  * @ioc: per adapter object
2677  * @fw_event: object describing the event
2678  * Context: This function will acquire ioc->fw_event_lock.
2679  *
2680  * If the fw_event is on the fw_event_list, remove it and do a put.
2681  *
2682  * Return nothing.
2683  */
2684 static void
2685 _scsih_fw_event_del_from_list(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work
2686         *fw_event)
2687 {
2688         unsigned long flags;
2689
2690         spin_lock_irqsave(&ioc->fw_event_lock, flags);
2691         if (!list_empty(&fw_event->list)) {
2692                 list_del_init(&fw_event->list);
2693                 fw_event_work_put(fw_event);
2694         }
2695         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2696 }
2697
2698
2699  /**
2700  * mpt3sas_send_trigger_data_event - send event for processing trigger data
2701  * @ioc: per adapter object
2702  * @event_data: trigger event data
2703  *
2704  * Return nothing.
2705  */
2706 void
2707 mpt3sas_send_trigger_data_event(struct MPT3SAS_ADAPTER *ioc,
2708         struct SL_WH_TRIGGERS_EVENT_DATA_T *event_data)
2709 {
2710         struct fw_event_work *fw_event;
2711         u16 sz;
2712
2713         if (ioc->is_driver_loading)
2714                 return;
2715         sz = sizeof(*event_data);
2716         fw_event = alloc_fw_event_work(sz);
2717         if (!fw_event)
2718                 return;
2719         fw_event->event = MPT3SAS_PROCESS_TRIGGER_DIAG;
2720         fw_event->ioc = ioc;
2721         memcpy(fw_event->event_data, event_data, sizeof(*event_data));
2722         _scsih_fw_event_add(ioc, fw_event);
2723         fw_event_work_put(fw_event);
2724 }
2725
2726 /**
2727  * _scsih_error_recovery_delete_devices - remove devices not responding
2728  * @ioc: per adapter object
2729  *
2730  * Return nothing.
2731  */
2732 static void
2733 _scsih_error_recovery_delete_devices(struct MPT3SAS_ADAPTER *ioc)
2734 {
2735         struct fw_event_work *fw_event;
2736
2737         if (ioc->is_driver_loading)
2738                 return;
2739         fw_event = alloc_fw_event_work(0);
2740         if (!fw_event)
2741                 return;
2742         fw_event->event = MPT3SAS_REMOVE_UNRESPONDING_DEVICES;
2743         fw_event->ioc = ioc;
2744         _scsih_fw_event_add(ioc, fw_event);
2745         fw_event_work_put(fw_event);
2746 }
2747
2748 /**
2749  * mpt3sas_port_enable_complete - port enable completed (fake event)
2750  * @ioc: per adapter object
2751  *
2752  * Return nothing.
2753  */
2754 void
2755 mpt3sas_port_enable_complete(struct MPT3SAS_ADAPTER *ioc)
2756 {
2757         struct fw_event_work *fw_event;
2758
2759         fw_event = alloc_fw_event_work(0);
2760         if (!fw_event)
2761                 return;
2762         fw_event->event = MPT3SAS_PORT_ENABLE_COMPLETE;
2763         fw_event->ioc = ioc;
2764         _scsih_fw_event_add(ioc, fw_event);
2765         fw_event_work_put(fw_event);
2766 }
2767
2768 static struct fw_event_work *dequeue_next_fw_event(struct MPT3SAS_ADAPTER *ioc)
2769 {
2770         unsigned long flags;
2771         struct fw_event_work *fw_event = NULL;
2772
2773         spin_lock_irqsave(&ioc->fw_event_lock, flags);
2774         if (!list_empty(&ioc->fw_event_list)) {
2775                 fw_event = list_first_entry(&ioc->fw_event_list,
2776                                 struct fw_event_work, list);
2777                 list_del_init(&fw_event->list);
2778         }
2779         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
2780
2781         return fw_event;
2782 }
2783
2784 /**
2785  * _scsih_fw_event_cleanup_queue - cleanup event queue
2786  * @ioc: per adapter object
2787  *
2788  * Walk the firmware event queue, either killing timers, or waiting
2789  * for outstanding events to complete
2790  *
2791  * Return nothing.
2792  */
2793 static void
2794 _scsih_fw_event_cleanup_queue(struct MPT3SAS_ADAPTER *ioc)
2795 {
2796         struct fw_event_work *fw_event;
2797
2798         if (list_empty(&ioc->fw_event_list) ||
2799              !ioc->firmware_event_thread || in_interrupt())
2800                 return;
2801
2802         while ((fw_event = dequeue_next_fw_event(ioc))) {
2803                 /*
2804                  * Wait on the fw_event to complete. If this returns 1, then
2805                  * the event was never executed, and we need a put for the
2806                  * reference the work had on the fw_event.
2807                  *
2808                  * If it did execute, we wait for it to finish, and the put will
2809                  * happen from _firmware_event_work()
2810                  */
2811                 if (cancel_work_sync(&fw_event->work))
2812                         fw_event_work_put(fw_event);
2813
2814                 fw_event_work_put(fw_event);
2815         }
2816 }
2817
2818 /**
2819  * _scsih_internal_device_block - block the sdev device
2820  * @sdev: per device object
2821  * @sas_device_priv_data : per device driver private data
2822  *
2823  * make sure device is blocked without error, if not
2824  * print an error
2825  */
2826 static void
2827 _scsih_internal_device_block(struct scsi_device *sdev,
2828                         struct MPT3SAS_DEVICE *sas_device_priv_data)
2829 {
2830         int r = 0;
2831
2832         sdev_printk(KERN_INFO, sdev, "device_block, handle(0x%04x)\n",
2833             sas_device_priv_data->sas_target->handle);
2834         sas_device_priv_data->block = 1;
2835
2836         r = scsi_internal_device_block(sdev);
2837         if (r == -EINVAL)
2838                 sdev_printk(KERN_WARNING, sdev,
2839                     "device_block failed with return(%d) for handle(0x%04x)\n",
2840                     sas_device_priv_data->sas_target->handle, r);
2841 }
2842
2843 /**
2844  * _scsih_internal_device_unblock - unblock the sdev device
2845  * @sdev: per device object
2846  * @sas_device_priv_data : per device driver private data
2847  * make sure device is unblocked without error, if not retry
2848  * by blocking and then unblocking
2849  */
2850
2851 static void
2852 _scsih_internal_device_unblock(struct scsi_device *sdev,
2853                         struct MPT3SAS_DEVICE *sas_device_priv_data)
2854 {
2855         int r = 0;
2856
2857         sdev_printk(KERN_WARNING, sdev, "device_unblock and setting to running, "
2858             "handle(0x%04x)\n", sas_device_priv_data->sas_target->handle);
2859         sas_device_priv_data->block = 0;
2860         r = scsi_internal_device_unblock(sdev, SDEV_RUNNING);
2861         if (r == -EINVAL) {
2862                 /* The device has been set to SDEV_RUNNING by SD layer during
2863                  * device addition but the request queue is still stopped by
2864                  * our earlier block call. We need to perform a block again
2865                  * to get the device to SDEV_BLOCK and then to SDEV_RUNNING */
2866
2867                 sdev_printk(KERN_WARNING, sdev,
2868                     "device_unblock failed with return(%d) for handle(0x%04x) "
2869                     "performing a block followed by an unblock\n",
2870                     sas_device_priv_data->sas_target->handle, r);
2871                 sas_device_priv_data->block = 1;
2872                 r = scsi_internal_device_block(sdev);
2873                 if (r)
2874                         sdev_printk(KERN_WARNING, sdev, "retried device_block "
2875                             "failed with return(%d) for handle(0x%04x)\n",
2876                             sas_device_priv_data->sas_target->handle, r);
2877
2878                 sas_device_priv_data->block = 0;
2879                 r = scsi_internal_device_unblock(sdev, SDEV_RUNNING);
2880                 if (r)
2881                         sdev_printk(KERN_WARNING, sdev, "retried device_unblock"
2882                             " failed with return(%d) for handle(0x%04x)\n",
2883                             sas_device_priv_data->sas_target->handle, r);
2884         }
2885 }
2886
2887 /**
2888  * _scsih_ublock_io_all_device - unblock every device
2889  * @ioc: per adapter object
2890  *
2891  * change the device state from block to running
2892  */
2893 static void
2894 _scsih_ublock_io_all_device(struct MPT3SAS_ADAPTER *ioc)
2895 {
2896         struct MPT3SAS_DEVICE *sas_device_priv_data;
2897         struct scsi_device *sdev;
2898
2899         shost_for_each_device(sdev, ioc->shost) {
2900                 sas_device_priv_data = sdev->hostdata;
2901                 if (!sas_device_priv_data)
2902                         continue;
2903                 if (!sas_device_priv_data->block)
2904                         continue;
2905
2906                 dewtprintk(ioc, sdev_printk(KERN_INFO, sdev,
2907                         "device_running, handle(0x%04x)\n",
2908                     sas_device_priv_data->sas_target->handle));
2909                 _scsih_internal_device_unblock(sdev, sas_device_priv_data);
2910         }
2911 }
2912
2913
2914 /**
2915  * _scsih_ublock_io_device - prepare device to be deleted
2916  * @ioc: per adapter object
2917  * @sas_addr: sas address
2918  *
2919  * unblock then put device in offline state
2920  */
2921 static void
2922 _scsih_ublock_io_device(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
2923 {
2924         struct MPT3SAS_DEVICE *sas_device_priv_data;
2925         struct scsi_device *sdev;
2926
2927         shost_for_each_device(sdev, ioc->shost) {
2928                 sas_device_priv_data = sdev->hostdata;
2929                 if (!sas_device_priv_data)
2930                         continue;
2931                 if (sas_device_priv_data->sas_target->sas_address
2932                     != sas_address)
2933                         continue;
2934                 if (sas_device_priv_data->block)
2935                         _scsih_internal_device_unblock(sdev,
2936                                 sas_device_priv_data);
2937         }
2938 }
2939
2940 /**
2941  * _scsih_block_io_all_device - set the device state to SDEV_BLOCK
2942  * @ioc: per adapter object
2943  * @handle: device handle
2944  *
2945  * During device pull we need to appropiately set the sdev state.
2946  */
2947 static void
2948 _scsih_block_io_all_device(struct MPT3SAS_ADAPTER *ioc)
2949 {
2950         struct MPT3SAS_DEVICE *sas_device_priv_data;
2951         struct scsi_device *sdev;
2952
2953         shost_for_each_device(sdev, ioc->shost) {
2954                 sas_device_priv_data = sdev->hostdata;
2955                 if (!sas_device_priv_data)
2956                         continue;
2957                 if (sas_device_priv_data->block)
2958                         continue;
2959                 if (sas_device_priv_data->ignore_delay_remove) {
2960                         sdev_printk(KERN_INFO, sdev,
2961                         "%s skip device_block for SES handle(0x%04x)\n",
2962                         __func__, sas_device_priv_data->sas_target->handle);
2963                         continue;
2964                 }
2965                 _scsih_internal_device_block(sdev, sas_device_priv_data);
2966         }
2967 }
2968
2969 /**
2970  * _scsih_block_io_device - set the device state to SDEV_BLOCK
2971  * @ioc: per adapter object
2972  * @handle: device handle
2973  *
2974  * During device pull we need to appropiately set the sdev state.
2975  */
2976 static void
2977 _scsih_block_io_device(struct MPT3SAS_ADAPTER *ioc, u16 handle)
2978 {
2979         struct MPT3SAS_DEVICE *sas_device_priv_data;
2980         struct scsi_device *sdev;
2981         struct _sas_device *sas_device;
2982
2983         sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
2984         if (!sas_device)
2985                 return;
2986
2987         shost_for_each_device(sdev, ioc->shost) {
2988                 sas_device_priv_data = sdev->hostdata;
2989                 if (!sas_device_priv_data)
2990                         continue;
2991                 if (sas_device_priv_data->sas_target->handle != handle)
2992                         continue;
2993                 if (sas_device_priv_data->block)
2994                         continue;
2995                 if (sas_device->pend_sas_rphy_add)
2996                         continue;
2997                 if (sas_device_priv_data->ignore_delay_remove) {
2998                         sdev_printk(KERN_INFO, sdev,
2999                         "%s skip device_block for SES handle(0x%04x)\n",
3000                         __func__, sas_device_priv_data->sas_target->handle);
3001                         continue;
3002                 }
3003                 _scsih_internal_device_block(sdev, sas_device_priv_data);
3004         }
3005
3006         sas_device_put(sas_device);
3007 }
3008
3009 /**
3010  * _scsih_block_io_to_children_attached_to_ex
3011  * @ioc: per adapter object
3012  * @sas_expander: the sas_device object
3013  *
3014  * This routine set sdev state to SDEV_BLOCK for all devices
3015  * attached to this expander. This function called when expander is
3016  * pulled.
3017  */
3018 static void
3019 _scsih_block_io_to_children_attached_to_ex(struct MPT3SAS_ADAPTER *ioc,
3020         struct _sas_node *sas_expander)
3021 {
3022         struct _sas_port *mpt3sas_port;
3023         struct _sas_device *sas_device;
3024         struct _sas_node *expander_sibling;
3025         unsigned long flags;
3026
3027         if (!sas_expander)
3028                 return;
3029
3030         list_for_each_entry(mpt3sas_port,
3031            &sas_expander->sas_port_list, port_list) {
3032                 if (mpt3sas_port->remote_identify.device_type ==
3033                     SAS_END_DEVICE) {
3034                         spin_lock_irqsave(&ioc->sas_device_lock, flags);
3035                         sas_device = __mpt3sas_get_sdev_by_addr(ioc,
3036                             mpt3sas_port->remote_identify.sas_address);
3037                         if (sas_device) {
3038                                 set_bit(sas_device->handle,
3039                                                 ioc->blocking_handles);
3040                                 sas_device_put(sas_device);
3041                         }
3042                         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
3043                 }
3044         }
3045
3046         list_for_each_entry(mpt3sas_port,
3047            &sas_expander->sas_port_list, port_list) {
3048
3049                 if (mpt3sas_port->remote_identify.device_type ==
3050                     SAS_EDGE_EXPANDER_DEVICE ||
3051                     mpt3sas_port->remote_identify.device_type ==
3052                     SAS_FANOUT_EXPANDER_DEVICE) {
3053                         expander_sibling =
3054                             mpt3sas_scsih_expander_find_by_sas_address(
3055                             ioc, mpt3sas_port->remote_identify.sas_address);
3056                         _scsih_block_io_to_children_attached_to_ex(ioc,
3057                             expander_sibling);
3058                 }
3059         }
3060 }
3061
3062 /**
3063  * _scsih_block_io_to_children_attached_directly
3064  * @ioc: per adapter object
3065  * @event_data: topology change event data
3066  *
3067  * This routine set sdev state to SDEV_BLOCK for all devices
3068  * direct attached during device pull.
3069  */
3070 static void
3071 _scsih_block_io_to_children_attached_directly(struct MPT3SAS_ADAPTER *ioc,
3072         Mpi2EventDataSasTopologyChangeList_t *event_data)
3073 {
3074         int i;
3075         u16 handle;
3076         u16 reason_code;
3077
3078         for (i = 0; i < event_data->NumEntries; i++) {
3079                 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
3080                 if (!handle)
3081                         continue;
3082                 reason_code = event_data->PHY[i].PhyStatus &
3083                     MPI2_EVENT_SAS_TOPO_RC_MASK;
3084                 if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
3085                         _scsih_block_io_device(ioc, handle);
3086         }
3087 }
3088
3089 /**
3090  * _scsih_tm_tr_send - send task management request
3091  * @ioc: per adapter object
3092  * @handle: device handle
3093  * Context: interrupt time.
3094  *
3095  * This code is to initiate the device removal handshake protocol
3096  * with controller firmware.  This function will issue target reset
3097  * using high priority request queue.  It will send a sas iounit
3098  * control request (MPI2_SAS_OP_REMOVE_DEVICE) from this completion.
3099  *
3100  * This is designed to send muliple task management request at the same
3101  * time to the fifo. If the fifo is full, we will append the request,
3102  * and process it in a future completion.
3103  */
3104 static void
3105 _scsih_tm_tr_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
3106 {
3107         Mpi2SCSITaskManagementRequest_t *mpi_request;
3108         u16 smid;
3109         struct _sas_device *sas_device = NULL;
3110         struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
3111         u64 sas_address = 0;
3112         unsigned long flags;
3113         struct _tr_list *delayed_tr;
3114         u32 ioc_state;
3115
3116         if (ioc->remove_host) {
3117                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3118                         "%s: host has been removed: handle(0x%04x)\n",
3119                         __func__, ioc->name, handle));
3120                 return;
3121         } else if (ioc->pci_error_recovery) {
3122                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3123                         "%s: host in pci error recovery: handle(0x%04x)\n",
3124                         __func__, ioc->name,
3125                     handle));
3126                 return;
3127         }
3128         ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
3129         if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
3130                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3131                         "%s: host is not operational: handle(0x%04x)\n",
3132                         __func__, ioc->name,
3133                    handle));
3134                 return;
3135         }
3136
3137         /* if PD, then return */
3138         if (test_bit(handle, ioc->pd_handles))
3139                 return;
3140
3141         spin_lock_irqsave(&ioc->sas_device_lock, flags);
3142         sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
3143         if (sas_device && sas_device->starget &&
3144             sas_device->starget->hostdata) {
3145                 sas_target_priv_data = sas_device->starget->hostdata;
3146                 sas_target_priv_data->deleted = 1;
3147                 sas_address = sas_device->sas_address;
3148         }
3149         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
3150
3151         if (sas_target_priv_data) {
3152                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3153                         "setting delete flag: handle(0x%04x), sas_addr(0x%016llx)\n",
3154                         ioc->name, handle,
3155                     (unsigned long long)sas_address));
3156                 if (sas_device->enclosure_handle != 0)
3157                         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3158                          "setting delete flag:enclosure logical id(0x%016llx),"
3159                          " slot(%d)\n", ioc->name, (unsigned long long)
3160                           sas_device->enclosure_logical_id,
3161                           sas_device->slot));
3162                 if (sas_device->connector_name[0] != '\0')
3163                         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3164                          "setting delete flag: enclosure level(0x%04x),"
3165                          " connector name( %s)\n", ioc->name,
3166                           sas_device->enclosure_level,
3167                           sas_device->connector_name));
3168                 _scsih_ublock_io_device(ioc, sas_address);
3169                 sas_target_priv_data->handle = MPT3SAS_INVALID_DEVICE_HANDLE;
3170         }
3171
3172         smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_tr_cb_idx);
3173         if (!smid) {
3174                 delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
3175                 if (!delayed_tr)
3176                         goto out;
3177                 INIT_LIST_HEAD(&delayed_tr->list);
3178                 delayed_tr->handle = handle;
3179                 list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
3180                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3181                     "DELAYED:tr:handle(0x%04x), (open)\n",
3182                     ioc->name, handle));
3183                 goto out;
3184         }
3185
3186         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3187                 "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
3188                 ioc->name, handle, smid,
3189             ioc->tm_tr_cb_idx));
3190         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
3191         memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
3192         mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
3193         mpi_request->DevHandle = cpu_to_le16(handle);
3194         mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
3195         mpt3sas_base_put_smid_hi_priority(ioc, smid, 0);
3196         mpt3sas_trigger_master(ioc, MASTER_TRIGGER_DEVICE_REMOVAL);
3197
3198 out:
3199         if (sas_device)
3200                 sas_device_put(sas_device);
3201 }
3202
3203 /**
3204  * _scsih_tm_tr_complete -
3205  * @ioc: per adapter object
3206  * @smid: system request message index
3207  * @msix_index: MSIX table index supplied by the OS
3208  * @reply: reply message frame(lower 32bit addr)
3209  * Context: interrupt time.
3210  *
3211  * This is the target reset completion routine.
3212  * This code is part of the code to initiate the device removal
3213  * handshake protocol with controller firmware.
3214  * It will send a sas iounit control request (MPI2_SAS_OP_REMOVE_DEVICE)
3215  *
3216  * Return 1 meaning mf should be freed from _base_interrupt
3217  *        0 means the mf is freed from this function.
3218  */
3219 static u8
3220 _scsih_tm_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
3221         u32 reply)
3222 {
3223         u16 handle;
3224         Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
3225         Mpi2SCSITaskManagementReply_t *mpi_reply =
3226             mpt3sas_base_get_reply_virt_addr(ioc, reply);
3227         Mpi2SasIoUnitControlRequest_t *mpi_request;
3228         u16 smid_sas_ctrl;
3229         u32 ioc_state;
3230         struct _sc_list *delayed_sc;
3231
3232         if (ioc->remove_host) {
3233                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3234                         "%s: host has been removed\n", __func__, ioc->name));
3235                 return 1;
3236         } else if (ioc->pci_error_recovery) {
3237                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3238                         "%s: host in pci error recovery\n", __func__,
3239                         ioc->name));
3240                 return 1;
3241         }
3242         ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
3243         if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
3244                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3245                         "%s: host is not operational\n", __func__, ioc->name));
3246                 return 1;
3247         }
3248         if (unlikely(!mpi_reply)) {
3249                 pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
3250                     ioc->name, __FILE__, __LINE__, __func__);
3251                 return 1;
3252         }
3253         mpi_request_tm = mpt3sas_base_get_msg_frame(ioc, smid);
3254         handle = le16_to_cpu(mpi_request_tm->DevHandle);
3255         if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
3256                 dewtprintk(ioc, pr_err(MPT3SAS_FMT
3257                         "spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n",
3258                         ioc->name, handle,
3259                     le16_to_cpu(mpi_reply->DevHandle), smid));
3260                 return 0;
3261         }
3262
3263         mpt3sas_trigger_master(ioc, MASTER_TRIGGER_TASK_MANAGMENT);
3264         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3265             "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
3266             "loginfo(0x%08x), completed(%d)\n", ioc->name,
3267             handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
3268             le32_to_cpu(mpi_reply->IOCLogInfo),
3269             le32_to_cpu(mpi_reply->TerminationCount)));
3270
3271         smid_sas_ctrl = mpt3sas_base_get_smid(ioc, ioc->tm_sas_control_cb_idx);
3272         if (!smid_sas_ctrl) {
3273                 delayed_sc = kzalloc(sizeof(*delayed_sc), GFP_ATOMIC);
3274                 if (!delayed_sc)
3275                         return _scsih_check_for_pending_tm(ioc, smid);
3276                 INIT_LIST_HEAD(&delayed_sc->list);
3277                 delayed_sc->handle = mpi_request_tm->DevHandle;
3278                 list_add_tail(&delayed_sc->list, &ioc->delayed_sc_list);
3279                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3280                     "DELAYED:sc:handle(0x%04x), (open)\n",
3281                     ioc->name, handle));
3282                 return _scsih_check_for_pending_tm(ioc, smid);
3283         }
3284
3285         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3286                 "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
3287                 ioc->name, handle, smid_sas_ctrl,
3288             ioc->tm_sas_control_cb_idx));
3289         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid_sas_ctrl);
3290         memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
3291         mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
3292         mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
3293         mpi_request->DevHandle = mpi_request_tm->DevHandle;
3294         mpt3sas_base_put_smid_default(ioc, smid_sas_ctrl);
3295
3296         return _scsih_check_for_pending_tm(ioc, smid);
3297 }
3298
3299
3300 /**
3301  * _scsih_sas_control_complete - completion routine
3302  * @ioc: per adapter object
3303  * @smid: system request message index
3304  * @msix_index: MSIX table index supplied by the OS
3305  * @reply: reply message frame(lower 32bit addr)
3306  * Context: interrupt time.
3307  *
3308  * This is the sas iounit control completion routine.
3309  * This code is part of the code to initiate the device removal
3310  * handshake protocol with controller firmware.
3311  *
3312  * Return 1 meaning mf should be freed from _base_interrupt
3313  *        0 means the mf is freed from this function.
3314  */
3315 static u8
3316 _scsih_sas_control_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid,
3317         u8 msix_index, u32 reply)
3318 {
3319         Mpi2SasIoUnitControlReply_t *mpi_reply =
3320             mpt3sas_base_get_reply_virt_addr(ioc, reply);
3321
3322         if (likely(mpi_reply)) {
3323                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3324                 "sc_complete:handle(0x%04x), (open) "
3325                 "smid(%d), ioc_status(0x%04x), loginfo(0x%08x)\n",
3326                 ioc->name, le16_to_cpu(mpi_reply->DevHandle), smid,
3327                 le16_to_cpu(mpi_reply->IOCStatus),
3328                 le32_to_cpu(mpi_reply->IOCLogInfo)));
3329         } else {
3330                 pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
3331                     ioc->name, __FILE__, __LINE__, __func__);
3332         }
3333         return mpt3sas_check_for_pending_internal_cmds(ioc, smid);
3334 }
3335
3336 /**
3337  * _scsih_tm_tr_volume_send - send target reset request for volumes
3338  * @ioc: per adapter object
3339  * @handle: device handle
3340  * Context: interrupt time.
3341  *
3342  * This is designed to send muliple task management request at the same
3343  * time to the fifo. If the fifo is full, we will append the request,
3344  * and process it in a future completion.
3345  */
3346 static void
3347 _scsih_tm_tr_volume_send(struct MPT3SAS_ADAPTER *ioc, u16 handle)
3348 {
3349         Mpi2SCSITaskManagementRequest_t *mpi_request;
3350         u16 smid;
3351         struct _tr_list *delayed_tr;
3352
3353         if (ioc->shost_recovery || ioc->remove_host ||
3354             ioc->pci_error_recovery) {
3355                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3356                         "%s: host reset in progress!\n",
3357                         __func__, ioc->name));
3358                 return;
3359         }
3360
3361         smid = mpt3sas_base_get_smid_hpr(ioc, ioc->tm_tr_volume_cb_idx);
3362         if (!smid) {
3363                 delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
3364                 if (!delayed_tr)
3365                         return;
3366                 INIT_LIST_HEAD(&delayed_tr->list);
3367                 delayed_tr->handle = handle;
3368                 list_add_tail(&delayed_tr->list, &ioc->delayed_tr_volume_list);
3369                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3370                     "DELAYED:tr:handle(0x%04x), (open)\n",
3371                     ioc->name, handle));
3372                 return;
3373         }
3374
3375         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3376                 "tr_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
3377                 ioc->name, handle, smid,
3378             ioc->tm_tr_volume_cb_idx));
3379         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
3380         memset(mpi_request, 0, sizeof(Mpi2SCSITaskManagementRequest_t));
3381         mpi_request->Function = MPI2_FUNCTION_SCSI_TASK_MGMT;
3382         mpi_request->DevHandle = cpu_to_le16(handle);
3383         mpi_request->TaskType = MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET;
3384         mpt3sas_base_put_smid_hi_priority(ioc, smid, 0);
3385 }
3386
3387 /**
3388  * _scsih_tm_volume_tr_complete - target reset completion
3389  * @ioc: per adapter object
3390  * @smid: system request message index
3391  * @msix_index: MSIX table index supplied by the OS
3392  * @reply: reply message frame(lower 32bit addr)
3393  * Context: interrupt time.
3394  *
3395  * Return 1 meaning mf should be freed from _base_interrupt
3396  *        0 means the mf is freed from this function.
3397  */
3398 static u8
3399 _scsih_tm_volume_tr_complete(struct MPT3SAS_ADAPTER *ioc, u16 smid,
3400         u8 msix_index, u32 reply)
3401 {
3402         u16 handle;
3403         Mpi2SCSITaskManagementRequest_t *mpi_request_tm;
3404         Mpi2SCSITaskManagementReply_t *mpi_reply =
3405             mpt3sas_base_get_reply_virt_addr(ioc, reply);
3406
3407         if (ioc->shost_recovery || ioc->remove_host ||
3408             ioc->pci_error_recovery) {
3409                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3410                         "%s: host reset in progress!\n",
3411                         __func__, ioc->name));
3412                 return 1;
3413         }
3414         if (unlikely(!mpi_reply)) {
3415                 pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
3416                     ioc->name, __FILE__, __LINE__, __func__);
3417                 return 1;
3418         }
3419
3420         mpi_request_tm = mpt3sas_base_get_msg_frame(ioc, smid);
3421         handle = le16_to_cpu(mpi_request_tm->DevHandle);
3422         if (handle != le16_to_cpu(mpi_reply->DevHandle)) {
3423                 dewtprintk(ioc, pr_err(MPT3SAS_FMT
3424                         "spurious interrupt: handle(0x%04x:0x%04x), smid(%d)!!!\n",
3425                         ioc->name, handle,
3426                     le16_to_cpu(mpi_reply->DevHandle), smid));
3427                 return 0;
3428         }
3429
3430         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3431             "tr_complete:handle(0x%04x), (open) smid(%d), ioc_status(0x%04x), "
3432             "loginfo(0x%08x), completed(%d)\n", ioc->name,
3433             handle, smid, le16_to_cpu(mpi_reply->IOCStatus),
3434             le32_to_cpu(mpi_reply->IOCLogInfo),
3435             le32_to_cpu(mpi_reply->TerminationCount)));
3436
3437         return _scsih_check_for_pending_tm(ioc, smid);
3438 }
3439
3440 /**
3441  * _scsih_issue_delayed_event_ack - issue delayed Event ACK messages
3442  * @ioc: per adapter object
3443  * @smid: system request message index
3444  * @event: Event ID
3445  * @event_context: used to track events uniquely
3446  *
3447  * Context - processed in interrupt context.
3448  */
3449 static void
3450 _scsih_issue_delayed_event_ack(struct MPT3SAS_ADAPTER *ioc, u16 smid, u16 event,
3451                                 u32 event_context)
3452 {
3453         Mpi2EventAckRequest_t *ack_request;
3454         int i = smid - ioc->internal_smid;
3455         unsigned long flags;
3456
3457         /* Without releasing the smid just update the
3458          * call back index and reuse the same smid for
3459          * processing this delayed request
3460          */
3461         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
3462         ioc->internal_lookup[i].cb_idx = ioc->base_cb_idx;
3463         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
3464
3465         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3466                 "EVENT ACK: event(0x%04x), smid(%d), cb(%d)\n",
3467                 ioc->name, le16_to_cpu(event), smid,
3468                 ioc->base_cb_idx));
3469         ack_request = mpt3sas_base_get_msg_frame(ioc, smid);
3470         memset(ack_request, 0, sizeof(Mpi2EventAckRequest_t));
3471         ack_request->Function = MPI2_FUNCTION_EVENT_ACK;
3472         ack_request->Event = event;
3473         ack_request->EventContext = event_context;
3474         ack_request->VF_ID = 0;  /* TODO */
3475         ack_request->VP_ID = 0;
3476         mpt3sas_base_put_smid_default(ioc, smid);
3477 }
3478
3479 /**
3480  * _scsih_issue_delayed_sas_io_unit_ctrl - issue delayed
3481  *                              sas_io_unit_ctrl messages
3482  * @ioc: per adapter object
3483  * @smid: system request message index
3484  * @handle: device handle
3485  *
3486  * Context - processed in interrupt context.
3487  */
3488 static void
3489 _scsih_issue_delayed_sas_io_unit_ctrl(struct MPT3SAS_ADAPTER *ioc,
3490                                         u16 smid, u16 handle)
3491         {
3492                 Mpi2SasIoUnitControlRequest_t *mpi_request;
3493                 u32 ioc_state;
3494                 int i = smid - ioc->internal_smid;
3495                 unsigned long flags;
3496
3497                 if (ioc->remove_host) {
3498                         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3499                             "%s: host has been removed\n",
3500                              __func__, ioc->name));
3501                         return;
3502                 } else if (ioc->pci_error_recovery) {
3503                         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3504                             "%s: host in pci error recovery\n",
3505                             __func__, ioc->name));
3506                 return;
3507         }
3508         ioc_state = mpt3sas_base_get_iocstate(ioc, 1);
3509         if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
3510                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3511                     "%s: host is not operational\n",
3512                     __func__, ioc->name));
3513                 return;
3514         }
3515
3516         /* Without releasing the smid just update the
3517          * call back index and reuse the same smid for
3518          * processing this delayed request
3519          */
3520         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
3521         ioc->internal_lookup[i].cb_idx = ioc->tm_sas_control_cb_idx;
3522         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
3523
3524         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3525             "sc_send:handle(0x%04x), (open), smid(%d), cb(%d)\n",
3526             ioc->name, le16_to_cpu(handle), smid,
3527             ioc->tm_sas_control_cb_idx));
3528         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
3529         memset(mpi_request, 0, sizeof(Mpi2SasIoUnitControlRequest_t));
3530         mpi_request->Function = MPI2_FUNCTION_SAS_IO_UNIT_CONTROL;
3531         mpi_request->Operation = MPI2_SAS_OP_REMOVE_DEVICE;
3532         mpi_request->DevHandle = handle;
3533         mpt3sas_base_put_smid_default(ioc, smid);
3534 }
3535
3536 /**
3537  * _scsih_check_for_pending_internal_cmds - check for pending internal messages
3538  * @ioc: per adapter object
3539  * @smid: system request message index
3540  *
3541  * Context: Executed in interrupt context
3542  *
3543  * This will check delayed internal messages list, and process the
3544  * next request.
3545  *
3546  * Return 1 meaning mf should be freed from _base_interrupt
3547  *        0 means the mf is freed from this function.
3548  */
3549 u8
3550 mpt3sas_check_for_pending_internal_cmds(struct MPT3SAS_ADAPTER *ioc, u16 smid)
3551 {
3552         struct _sc_list *delayed_sc;
3553         struct _event_ack_list *delayed_event_ack;
3554
3555         if (!list_empty(&ioc->delayed_event_ack_list)) {
3556                 delayed_event_ack = list_entry(ioc->delayed_event_ack_list.next,
3557                                                 struct _event_ack_list, list);
3558                 _scsih_issue_delayed_event_ack(ioc, smid,
3559                   delayed_event_ack->Event, delayed_event_ack->EventContext);
3560                 list_del(&delayed_event_ack->list);
3561                 kfree(delayed_event_ack);
3562                 return 0;
3563         }
3564
3565         if (!list_empty(&ioc->delayed_sc_list)) {
3566                 delayed_sc = list_entry(ioc->delayed_sc_list.next,
3567                                                 struct _sc_list, list);
3568                 _scsih_issue_delayed_sas_io_unit_ctrl(ioc, smid,
3569                                                  delayed_sc->handle);
3570                 list_del(&delayed_sc->list);
3571                 kfree(delayed_sc);
3572                 return 0;
3573         }
3574         return 1;
3575 }
3576
3577 /**
3578  * _scsih_check_for_pending_tm - check for pending task management
3579  * @ioc: per adapter object
3580  * @smid: system request message index
3581  *
3582  * This will check delayed target reset list, and feed the
3583  * next reqeust.
3584  *
3585  * Return 1 meaning mf should be freed from _base_interrupt
3586  *        0 means the mf is freed from this function.
3587  */
3588 static u8
3589 _scsih_check_for_pending_tm(struct MPT3SAS_ADAPTER *ioc, u16 smid)
3590 {
3591         struct _tr_list *delayed_tr;
3592
3593         if (!list_empty(&ioc->delayed_tr_volume_list)) {
3594                 delayed_tr = list_entry(ioc->delayed_tr_volume_list.next,
3595                     struct _tr_list, list);
3596                 mpt3sas_base_free_smid(ioc, smid);
3597                 _scsih_tm_tr_volume_send(ioc, delayed_tr->handle);
3598                 list_del(&delayed_tr->list);
3599                 kfree(delayed_tr);
3600                 return 0;
3601         }
3602
3603         if (!list_empty(&ioc->delayed_tr_list)) {
3604                 delayed_tr = list_entry(ioc->delayed_tr_list.next,
3605                     struct _tr_list, list);
3606                 mpt3sas_base_free_smid(ioc, smid);
3607                 _scsih_tm_tr_send(ioc, delayed_tr->handle);
3608                 list_del(&delayed_tr->list);
3609                 kfree(delayed_tr);
3610                 return 0;
3611         }
3612
3613         return 1;
3614 }
3615
3616 /**
3617  * _scsih_check_topo_delete_events - sanity check on topo events
3618  * @ioc: per adapter object
3619  * @event_data: the event data payload
3620  *
3621  * This routine added to better handle cable breaker.
3622  *
3623  * This handles the case where driver receives multiple expander
3624  * add and delete events in a single shot.  When there is a delete event
3625  * the routine will void any pending add events waiting in the event queue.
3626  *
3627  * Return nothing.
3628  */
3629 static void
3630 _scsih_check_topo_delete_events(struct MPT3SAS_ADAPTER *ioc,
3631         Mpi2EventDataSasTopologyChangeList_t *event_data)
3632 {
3633         struct fw_event_work *fw_event;
3634         Mpi2EventDataSasTopologyChangeList_t *local_event_data;
3635         u16 expander_handle;
3636         struct _sas_node *sas_expander;
3637         unsigned long flags;
3638         int i, reason_code;
3639         u16 handle;
3640
3641         for (i = 0 ; i < event_data->NumEntries; i++) {
3642                 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
3643                 if (!handle)
3644                         continue;
3645                 reason_code = event_data->PHY[i].PhyStatus &
3646                     MPI2_EVENT_SAS_TOPO_RC_MASK;
3647                 if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING)
3648                         _scsih_tm_tr_send(ioc, handle);
3649         }
3650
3651         expander_handle = le16_to_cpu(event_data->ExpanderDevHandle);
3652         if (expander_handle < ioc->sas_hba.num_phys) {
3653                 _scsih_block_io_to_children_attached_directly(ioc, event_data);
3654                 return;
3655         }
3656         if (event_data->ExpStatus ==
3657             MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING) {
3658                 /* put expander attached devices into blocking state */
3659                 spin_lock_irqsave(&ioc->sas_node_lock, flags);
3660                 sas_expander = mpt3sas_scsih_expander_find_by_handle(ioc,
3661                     expander_handle);
3662                 _scsih_block_io_to_children_attached_to_ex(ioc, sas_expander);
3663                 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
3664                 do {
3665                         handle = find_first_bit(ioc->blocking_handles,
3666                             ioc->facts.MaxDevHandle);
3667                         if (handle < ioc->facts.MaxDevHandle)
3668                                 _scsih_block_io_device(ioc, handle);
3669                 } while (test_and_clear_bit(handle, ioc->blocking_handles));
3670         } else if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_RESPONDING)
3671                 _scsih_block_io_to_children_attached_directly(ioc, event_data);
3672
3673         if (event_data->ExpStatus != MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING)
3674                 return;
3675
3676         /* mark ignore flag for pending events */
3677         spin_lock_irqsave(&ioc->fw_event_lock, flags);
3678         list_for_each_entry(fw_event, &ioc->fw_event_list, list) {
3679                 if (fw_event->event != MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
3680                     fw_event->ignore)
3681                         continue;
3682                 local_event_data = (Mpi2EventDataSasTopologyChangeList_t *)
3683                                    fw_event->event_data;
3684                 if (local_event_data->ExpStatus ==
3685                     MPI2_EVENT_SAS_TOPO_ES_ADDED ||
3686                     local_event_data->ExpStatus ==
3687                     MPI2_EVENT_SAS_TOPO_ES_RESPONDING) {
3688                         if (le16_to_cpu(local_event_data->ExpanderDevHandle) ==
3689                             expander_handle) {
3690                                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3691                                     "setting ignoring flag\n", ioc->name));
3692                                 fw_event->ignore = 1;
3693                         }
3694                 }
3695         }
3696         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
3697 }
3698
3699 /**
3700  * _scsih_set_volume_delete_flag - setting volume delete flag
3701  * @ioc: per adapter object
3702  * @handle: device handle
3703  *
3704  * This returns nothing.
3705  */
3706 static void
3707 _scsih_set_volume_delete_flag(struct MPT3SAS_ADAPTER *ioc, u16 handle)
3708 {
3709         struct _raid_device *raid_device;
3710         struct MPT3SAS_TARGET *sas_target_priv_data;
3711         unsigned long flags;
3712
3713         spin_lock_irqsave(&ioc->raid_device_lock, flags);
3714         raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
3715         if (raid_device && raid_device->starget &&
3716             raid_device->starget->hostdata) {
3717                 sas_target_priv_data =
3718                     raid_device->starget->hostdata;
3719                 sas_target_priv_data->deleted = 1;
3720                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
3721                     "setting delete flag: handle(0x%04x), "
3722                     "wwid(0x%016llx)\n", ioc->name, handle,
3723                     (unsigned long long) raid_device->wwid));
3724         }
3725         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
3726 }
3727
3728 /**
3729  * _scsih_set_volume_handle_for_tr - set handle for target reset to volume
3730  * @handle: input handle
3731  * @a: handle for volume a
3732  * @b: handle for volume b
3733  *
3734  * IR firmware only supports two raid volumes.  The purpose of this
3735  * routine is to set the volume handle in either a or b. When the given
3736  * input handle is non-zero, or when a and b have not been set before.
3737  */
3738 static void
3739 _scsih_set_volume_handle_for_tr(u16 handle, u16 *a, u16 *b)
3740 {
3741         if (!handle || handle == *a || handle == *b)
3742                 return;
3743         if (!*a)
3744                 *a = handle;
3745         else if (!*b)
3746                 *b = handle;
3747 }
3748
3749 /**
3750  * _scsih_check_ir_config_unhide_events - check for UNHIDE events
3751  * @ioc: per adapter object
3752  * @event_data: the event data payload
3753  * Context: interrupt time.
3754  *
3755  * This routine will send target reset to volume, followed by target
3756  * resets to the PDs. This is called when a PD has been removed, or
3757  * volume has been deleted or removed. When the target reset is sent
3758  * to volume, the PD target resets need to be queued to start upon
3759  * completion of the volume target reset.
3760  *
3761  * Return nothing.
3762  */
3763 static void
3764 _scsih_check_ir_config_unhide_events(struct MPT3SAS_ADAPTER *ioc,
3765         Mpi2EventDataIrConfigChangeList_t *event_data)
3766 {
3767         Mpi2EventIrConfigElement_t *element;
3768         int i;
3769         u16 handle, volume_handle, a, b;
3770         struct _tr_list *delayed_tr;
3771
3772         a = 0;
3773         b = 0;
3774
3775         if (ioc->is_warpdrive)
3776                 return;
3777
3778         /* Volume Resets for Deleted or Removed */
3779         element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
3780         for (i = 0; i < event_data->NumElements; i++, element++) {
3781                 if (le32_to_cpu(event_data->Flags) &
3782                     MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
3783                         continue;
3784                 if (element->ReasonCode ==
3785                     MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED ||
3786                     element->ReasonCode ==
3787                     MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
3788                         volume_handle = le16_to_cpu(element->VolDevHandle);
3789                         _scsih_set_volume_delete_flag(ioc, volume_handle);
3790                         _scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
3791                 }
3792         }
3793
3794         /* Volume Resets for UNHIDE events */
3795         element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
3796         for (i = 0; i < event_data->NumElements; i++, element++) {
3797                 if (le32_to_cpu(event_data->Flags) &
3798                     MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
3799                         continue;
3800                 if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_UNHIDE) {
3801                         volume_handle = le16_to_cpu(element->VolDevHandle);
3802                         _scsih_set_volume_handle_for_tr(volume_handle, &a, &b);
3803                 }
3804         }
3805
3806         if (a)
3807                 _scsih_tm_tr_volume_send(ioc, a);
3808         if (b)
3809                 _scsih_tm_tr_volume_send(ioc, b);
3810
3811         /* PD target resets */
3812         element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
3813         for (i = 0; i < event_data->NumElements; i++, element++) {
3814                 if (element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_UNHIDE)
3815                         continue;
3816                 handle = le16_to_cpu(element->PhysDiskDevHandle);
3817                 volume_handle = le16_to_cpu(element->VolDevHandle);
3818                 clear_bit(handle, ioc->pd_handles);
3819                 if (!volume_handle)
3820                         _scsih_tm_tr_send(ioc, handle);
3821                 else if (volume_handle == a || volume_handle == b) {
3822                         delayed_tr = kzalloc(sizeof(*delayed_tr), GFP_ATOMIC);
3823                         BUG_ON(!delayed_tr);
3824                         INIT_LIST_HEAD(&delayed_tr->list);
3825                         delayed_tr->handle = handle;
3826                         list_add_tail(&delayed_tr->list, &ioc->delayed_tr_list);
3827                         dewtprintk(ioc, pr_info(MPT3SAS_FMT
3828                             "DELAYED:tr:handle(0x%04x), (open)\n", ioc->name,
3829                             handle));
3830                 } else
3831                         _scsih_tm_tr_send(ioc, handle);
3832         }
3833 }
3834
3835
3836 /**
3837  * _scsih_check_volume_delete_events - set delete flag for volumes
3838  * @ioc: per adapter object
3839  * @event_data: the event data payload
3840  * Context: interrupt time.
3841  *
3842  * This will handle the case when the cable connected to entire volume is
3843  * pulled. We will take care of setting the deleted flag so normal IO will
3844  * not be sent.
3845  *
3846  * Return nothing.
3847  */
3848 static void
3849 _scsih_check_volume_delete_events(struct MPT3SAS_ADAPTER *ioc,
3850         Mpi2EventDataIrVolume_t *event_data)
3851 {
3852         u32 state;
3853
3854         if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
3855                 return;
3856         state = le32_to_cpu(event_data->NewValue);
3857         if (state == MPI2_RAID_VOL_STATE_MISSING || state ==
3858             MPI2_RAID_VOL_STATE_FAILED)
3859                 _scsih_set_volume_delete_flag(ioc,
3860                     le16_to_cpu(event_data->VolDevHandle));
3861 }
3862
3863 /**
3864  * _scsih_temp_threshold_events - display temperature threshold exceeded events
3865  * @ioc: per adapter object
3866  * @event_data: the temp threshold event data
3867  * Context: interrupt time.
3868  *
3869  * Return nothing.
3870  */
3871 static void
3872 _scsih_temp_threshold_events(struct MPT3SAS_ADAPTER *ioc,
3873         Mpi2EventDataTemperature_t *event_data)
3874 {
3875         if (ioc->temp_sensors_count >= event_data->SensorNum) {
3876                 pr_err(MPT3SAS_FMT "Temperature Threshold flags %s%s%s%s"
3877                   " exceeded for Sensor: %d !!!\n", ioc->name,
3878                   ((le16_to_cpu(event_data->Status) & 0x1) == 1) ? "0 " : " ",
3879                   ((le16_to_cpu(event_data->Status) & 0x2) == 2) ? "1 " : " ",
3880                   ((le16_to_cpu(event_data->Status) & 0x4) == 4) ? "2 " : " ",
3881                   ((le16_to_cpu(event_data->Status) & 0x8) == 8) ? "3 " : " ",
3882                   event_data->SensorNum);
3883                 pr_err(MPT3SAS_FMT "Current Temp In Celsius: %d\n",
3884                         ioc->name, event_data->CurrentTemperature);
3885         }
3886 }
3887
3888 /**
3889  * _scsih_flush_running_cmds - completing outstanding commands.
3890  * @ioc: per adapter object
3891  *
3892  * The flushing out of all pending scmd commands following host reset,
3893  * where all IO is dropped to the floor.
3894  *
3895  * Return nothing.
3896  */
3897 static void
3898 _scsih_flush_running_cmds(struct MPT3SAS_ADAPTER *ioc)
3899 {
3900         struct scsi_cmnd *scmd;
3901         u16 smid;
3902         u16 count = 0;
3903
3904         for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
3905                 scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
3906                 if (!scmd)
3907                         continue;
3908                 count++;
3909                 mpt3sas_base_free_smid(ioc, smid);
3910                 scsi_dma_unmap(scmd);
3911                 if (ioc->pci_error_recovery)
3912                         scmd->result = DID_NO_CONNECT << 16;
3913                 else
3914                         scmd->result = DID_RESET << 16;
3915                 scmd->scsi_done(scmd);
3916         }
3917         dtmprintk(ioc, pr_info(MPT3SAS_FMT "completing %d cmds\n",
3918             ioc->name, count));
3919 }
3920
3921 /**
3922  * _scsih_setup_eedp - setup MPI request for EEDP transfer
3923  * @ioc: per adapter object
3924  * @scmd: pointer to scsi command object
3925  * @mpi_request: pointer to the SCSI_IO reqest message frame
3926  *
3927  * Supporting protection 1 and 3.
3928  *
3929  * Returns nothing
3930  */
3931 static void
3932 _scsih_setup_eedp(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
3933         Mpi2SCSIIORequest_t *mpi_request)
3934 {
3935         u16 eedp_flags;
3936         unsigned char prot_op = scsi_get_prot_op(scmd);
3937         unsigned char prot_type = scsi_get_prot_type(scmd);
3938         Mpi25SCSIIORequest_t *mpi_request_3v =
3939            (Mpi25SCSIIORequest_t *)mpi_request;
3940
3941         if (prot_type == SCSI_PROT_DIF_TYPE0 || prot_op == SCSI_PROT_NORMAL)
3942                 return;
3943
3944         if (prot_op ==  SCSI_PROT_READ_STRIP)
3945                 eedp_flags = MPI2_SCSIIO_EEDPFLAGS_CHECK_REMOVE_OP;
3946         else if (prot_op ==  SCSI_PROT_WRITE_INSERT)
3947                 eedp_flags = MPI2_SCSIIO_EEDPFLAGS_INSERT_OP;
3948         else
3949                 return;
3950
3951         switch (prot_type) {
3952         case SCSI_PROT_DIF_TYPE1:
3953         case SCSI_PROT_DIF_TYPE2:
3954
3955                 /*
3956                 * enable ref/guard checking
3957                 * auto increment ref tag
3958                 */
3959                 eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_INC_PRI_REFTAG |
3960                     MPI2_SCSIIO_EEDPFLAGS_CHECK_REFTAG |
3961                     MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
3962                 mpi_request->CDB.EEDP32.PrimaryReferenceTag =
3963                     cpu_to_be32(scsi_prot_ref_tag(scmd));
3964                 break;
3965
3966         case SCSI_PROT_DIF_TYPE3:
3967
3968                 /*
3969                 * enable guard checking
3970                 */
3971                 eedp_flags |= MPI2_SCSIIO_EEDPFLAGS_CHECK_GUARD;
3972
3973                 break;
3974         }
3975
3976         mpi_request_3v->EEDPBlockSize =
3977             cpu_to_le16(scmd->device->sector_size);
3978         mpi_request->EEDPFlags = cpu_to_le16(eedp_flags);
3979 }
3980
3981 /**
3982  * _scsih_eedp_error_handling - return sense code for EEDP errors
3983  * @scmd: pointer to scsi command object
3984  * @ioc_status: ioc status
3985  *
3986  * Returns nothing
3987  */
3988 static void
3989 _scsih_eedp_error_handling(struct scsi_cmnd *scmd, u16 ioc_status)
3990 {
3991         u8 ascq;
3992
3993         switch (ioc_status) {
3994         case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
3995                 ascq = 0x01;
3996                 break;
3997         case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
3998                 ascq = 0x02;
3999                 break;
4000         case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
4001                 ascq = 0x03;
4002                 break;
4003         default:
4004                 ascq = 0x00;
4005                 break;
4006         }
4007         scsi_build_sense_buffer(0, scmd->sense_buffer, ILLEGAL_REQUEST, 0x10,
4008             ascq);
4009         scmd->result = DRIVER_SENSE << 24 | (DID_ABORT << 16) |
4010             SAM_STAT_CHECK_CONDITION;
4011 }
4012
4013 static inline bool ata_12_16_cmd(struct scsi_cmnd *scmd)
4014 {
4015         return (scmd->cmnd[0] == ATA_12 || scmd->cmnd[0] == ATA_16);
4016 }
4017
4018 /**
4019  * scsih_qcmd - main scsi request entry point
4020  * @scmd: pointer to scsi command object
4021  * @done: function pointer to be invoked on completion
4022  *
4023  * The callback index is set inside `ioc->scsi_io_cb_idx`.
4024  *
4025  * Returns 0 on success.  If there's a failure, return either:
4026  * SCSI_MLQUEUE_DEVICE_BUSY if the device queue is full, or
4027  * SCSI_MLQUEUE_HOST_BUSY if the entire host queue is full
4028  */
4029 static int
4030 scsih_qcmd(struct Scsi_Host *shost, struct scsi_cmnd *scmd)
4031 {
4032         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
4033         struct MPT3SAS_DEVICE *sas_device_priv_data;
4034         struct MPT3SAS_TARGET *sas_target_priv_data;
4035         struct _raid_device *raid_device;
4036         Mpi2SCSIIORequest_t *mpi_request;
4037         u32 mpi_control;
4038         u16 smid;
4039         u16 handle;
4040
4041         if (ioc->logging_level & MPT_DEBUG_SCSI)
4042                 scsi_print_command(scmd);
4043
4044         /*
4045          * Lock the device for any subsequent command until command is
4046          * done.
4047          */
4048         if (ata_12_16_cmd(scmd))
4049                 scsi_internal_device_block(scmd->device);
4050
4051         sas_device_priv_data = scmd->device->hostdata;
4052         if (!sas_device_priv_data || !sas_device_priv_data->sas_target) {
4053                 scmd->result = DID_NO_CONNECT << 16;
4054                 scmd->scsi_done(scmd);
4055                 return 0;
4056         }
4057
4058         if (ioc->pci_error_recovery || ioc->remove_host) {
4059                 scmd->result = DID_NO_CONNECT << 16;
4060                 scmd->scsi_done(scmd);
4061                 return 0;
4062         }
4063
4064         sas_target_priv_data = sas_device_priv_data->sas_target;
4065
4066         /* invalid device handle */
4067         handle = sas_target_priv_data->handle;
4068         if (handle == MPT3SAS_INVALID_DEVICE_HANDLE) {
4069                 scmd->result = DID_NO_CONNECT << 16;
4070                 scmd->scsi_done(scmd);
4071                 return 0;
4072         }
4073
4074
4075         /* host recovery or link resets sent via IOCTLs */
4076         if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
4077                 return SCSI_MLQUEUE_HOST_BUSY;
4078
4079         /* device has been deleted */
4080         else if (sas_target_priv_data->deleted) {
4081                 scmd->result = DID_NO_CONNECT << 16;
4082                 scmd->scsi_done(scmd);
4083                 return 0;
4084         /* device busy with task managment */
4085         } else if (sas_target_priv_data->tm_busy ||
4086             sas_device_priv_data->block)
4087                 return SCSI_MLQUEUE_DEVICE_BUSY;
4088
4089         if (scmd->sc_data_direction == DMA_FROM_DEVICE)
4090                 mpi_control = MPI2_SCSIIO_CONTROL_READ;
4091         else if (scmd->sc_data_direction == DMA_TO_DEVICE)
4092                 mpi_control = MPI2_SCSIIO_CONTROL_WRITE;
4093         else
4094                 mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
4095
4096         /* set tags */
4097         mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
4098
4099         /* Make sure Device is not raid volume.
4100          * We do not expose raid functionality to upper layer for warpdrive.
4101          */
4102         if (!ioc->is_warpdrive && !scsih_is_raid(&scmd->device->sdev_gendev)
4103             && sas_is_tlr_enabled(scmd->device) && scmd->cmd_len != 32)
4104                 mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON;
4105
4106         smid = mpt3sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd);
4107         if (!smid) {
4108                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
4109                     ioc->name, __func__);
4110                 goto out;
4111         }
4112         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
4113         memset(mpi_request, 0, sizeof(Mpi2SCSIIORequest_t));
4114         _scsih_setup_eedp(ioc, scmd, mpi_request);
4115
4116         if (scmd->cmd_len == 32)
4117                 mpi_control |= 4 << MPI2_SCSIIO_CONTROL_ADDCDBLEN_SHIFT;
4118         mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
4119         if (sas_device_priv_data->sas_target->flags &
4120             MPT_TARGET_FLAGS_RAID_COMPONENT)
4121                 mpi_request->Function = MPI2_FUNCTION_RAID_SCSI_IO_PASSTHROUGH;
4122         else
4123                 mpi_request->Function = MPI2_FUNCTION_SCSI_IO_REQUEST;
4124         mpi_request->DevHandle = cpu_to_le16(handle);
4125         mpi_request->DataLength = cpu_to_le32(scsi_bufflen(scmd));
4126         mpi_request->Control = cpu_to_le32(mpi_control);
4127         mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len);
4128         mpi_request->MsgFlags = MPI2_SCSIIO_MSGFLAGS_SYSTEM_SENSE_ADDR;
4129         mpi_request->SenseBufferLength = SCSI_SENSE_BUFFERSIZE;
4130         mpi_request->SenseBufferLowAddress =
4131             mpt3sas_base_get_sense_buffer_dma(ioc, smid);
4132         mpi_request->SGLOffset0 = offsetof(Mpi2SCSIIORequest_t, SGL) / 4;
4133         int_to_scsilun(sas_device_priv_data->lun, (struct scsi_lun *)
4134             mpi_request->LUN);
4135         memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
4136
4137         if (mpi_request->DataLength) {
4138                 if (ioc->build_sg_scmd(ioc, scmd, smid)) {
4139                         mpt3sas_base_free_smid(ioc, smid);
4140                         goto out;
4141                 }
4142         } else
4143                 ioc->build_zero_len_sge(ioc, &mpi_request->SGL);
4144
4145         raid_device = sas_target_priv_data->raid_device;
4146         if (raid_device && raid_device->direct_io_enabled)
4147                 mpt3sas_setup_direct_io(ioc, scmd, raid_device, mpi_request,
4148                     smid);
4149
4150         if (likely(mpi_request->Function == MPI2_FUNCTION_SCSI_IO_REQUEST)) {
4151                 if (sas_target_priv_data->flags & MPT_TARGET_FASTPATH_IO) {
4152                         mpi_request->IoFlags = cpu_to_le16(scmd->cmd_len |
4153                             MPI25_SCSIIO_IOFLAGS_FAST_PATH);
4154                         mpt3sas_base_put_smid_fast_path(ioc, smid, handle);
4155                 } else
4156                         mpt3sas_base_put_smid_scsi_io(ioc, smid,
4157                             le16_to_cpu(mpi_request->DevHandle));
4158         } else
4159                 mpt3sas_base_put_smid_default(ioc, smid);
4160         return 0;
4161
4162  out:
4163         return SCSI_MLQUEUE_HOST_BUSY;
4164 }
4165
4166 /**
4167  * _scsih_normalize_sense - normalize descriptor and fixed format sense data
4168  * @sense_buffer: sense data returned by target
4169  * @data: normalized skey/asc/ascq
4170  *
4171  * Return nothing.
4172  */
4173 static void
4174 _scsih_normalize_sense(char *sense_buffer, struct sense_info *data)
4175 {
4176         if ((sense_buffer[0] & 0x7F) >= 0x72) {
4177                 /* descriptor format */
4178                 data->skey = sense_buffer[1] & 0x0F;
4179                 data->asc = sense_buffer[2];
4180                 data->ascq = sense_buffer[3];
4181         } else {
4182                 /* fixed format */
4183                 data->skey = sense_buffer[2] & 0x0F;
4184                 data->asc = sense_buffer[12];
4185                 data->ascq = sense_buffer[13];
4186         }
4187 }
4188
4189 /**
4190  * _scsih_scsi_ioc_info - translated non-succesfull SCSI_IO request
4191  * @ioc: per adapter object
4192  * @scmd: pointer to scsi command object
4193  * @mpi_reply: reply mf payload returned from firmware
4194  *
4195  * scsi_status - SCSI Status code returned from target device
4196  * scsi_state - state info associated with SCSI_IO determined by ioc
4197  * ioc_status - ioc supplied status info
4198  *
4199  * Return nothing.
4200  */
4201 static void
4202 _scsih_scsi_ioc_info(struct MPT3SAS_ADAPTER *ioc, struct scsi_cmnd *scmd,
4203         Mpi2SCSIIOReply_t *mpi_reply, u16 smid)
4204 {
4205         u32 response_info;
4206         u8 *response_bytes;
4207         u16 ioc_status = le16_to_cpu(mpi_reply->IOCStatus) &
4208             MPI2_IOCSTATUS_MASK;
4209         u8 scsi_state = mpi_reply->SCSIState;
4210         u8 scsi_status = mpi_reply->SCSIStatus;
4211         char *desc_ioc_state = NULL;
4212         char *desc_scsi_status = NULL;
4213         char *desc_scsi_state = ioc->tmp_string;
4214         u32 log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
4215         struct _sas_device *sas_device = NULL;
4216         struct scsi_target *starget = scmd->device->sdev_target;
4217         struct MPT3SAS_TARGET *priv_target = starget->hostdata;
4218         char *device_str = NULL;
4219
4220         if (!priv_target)
4221                 return;
4222         if (ioc->hide_ir_msg)
4223                 device_str = "WarpDrive";
4224         else
4225                 device_str = "volume";
4226
4227         if (log_info == 0x31170000)
4228                 return;
4229
4230         switch (ioc_status) {
4231         case MPI2_IOCSTATUS_SUCCESS:
4232                 desc_ioc_state = "success";
4233                 break;
4234         case MPI2_IOCSTATUS_INVALID_FUNCTION:
4235                 desc_ioc_state = "invalid function";
4236                 break;
4237         case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
4238                 desc_ioc_state = "scsi recovered error";
4239                 break;
4240         case MPI2_IOCSTATUS_SCSI_INVALID_DEVHANDLE:
4241                 desc_ioc_state = "scsi invalid dev handle";
4242                 break;
4243         case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
4244                 desc_ioc_state = "scsi device not there";
4245                 break;
4246         case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
4247                 desc_ioc_state = "scsi data overrun";
4248                 break;
4249         case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
4250                 desc_ioc_state = "scsi data underrun";
4251                 break;
4252         case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
4253                 desc_ioc_state = "scsi io data error";
4254                 break;
4255         case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
4256                 desc_ioc_state = "scsi protocol error";
4257                 break;
4258         case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
4259                 desc_ioc_state = "scsi task terminated";
4260                 break;
4261         case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
4262                 desc_ioc_state = "scsi residual mismatch";
4263                 break;
4264         case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
4265                 desc_ioc_state = "scsi task mgmt failed";
4266                 break;
4267         case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
4268                 desc_ioc_state = "scsi ioc terminated";
4269                 break;
4270         case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
4271                 desc_ioc_state = "scsi ext terminated";
4272                 break;
4273         case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
4274                 desc_ioc_state = "eedp guard error";
4275                 break;
4276         case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
4277                 desc_ioc_state = "eedp ref tag error";
4278                 break;
4279         case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
4280                 desc_ioc_state = "eedp app tag error";
4281                 break;
4282         case MPI2_IOCSTATUS_INSUFFICIENT_POWER:
4283                 desc_ioc_state = "insufficient power";
4284                 break;
4285         default:
4286                 desc_ioc_state = "unknown";
4287                 break;
4288         }
4289
4290         switch (scsi_status) {
4291         case MPI2_SCSI_STATUS_GOOD:
4292                 desc_scsi_status = "good";
4293                 break;
4294         case MPI2_SCSI_STATUS_CHECK_CONDITION:
4295                 desc_scsi_status = "check condition";
4296                 break;
4297         case MPI2_SCSI_STATUS_CONDITION_MET:
4298                 desc_scsi_status = "condition met";
4299                 break;
4300         case MPI2_SCSI_STATUS_BUSY:
4301                 desc_scsi_status = "busy";
4302                 break;
4303         case MPI2_SCSI_STATUS_INTERMEDIATE:
4304                 desc_scsi_status = "intermediate";
4305                 break;
4306         case MPI2_SCSI_STATUS_INTERMEDIATE_CONDMET:
4307                 desc_scsi_status = "intermediate condmet";
4308                 break;
4309         case MPI2_SCSI_STATUS_RESERVATION_CONFLICT:
4310                 desc_scsi_status = "reservation conflict";
4311                 break;
4312         case MPI2_SCSI_STATUS_COMMAND_TERMINATED:
4313                 desc_scsi_status = "command terminated";
4314                 break;
4315         case MPI2_SCSI_STATUS_TASK_SET_FULL:
4316                 desc_scsi_status = "task set full";
4317                 break;
4318         case MPI2_SCSI_STATUS_ACA_ACTIVE:
4319                 desc_scsi_status = "aca active";
4320                 break;
4321         case MPI2_SCSI_STATUS_TASK_ABORTED:
4322                 desc_scsi_status = "task aborted";
4323                 break;
4324         default:
4325                 desc_scsi_status = "unknown";
4326                 break;
4327         }
4328
4329         desc_scsi_state[0] = '\0';
4330         if (!scsi_state)
4331                 desc_scsi_state = " ";
4332         if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
4333                 strcat(desc_scsi_state, "response info ");
4334         if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
4335                 strcat(desc_scsi_state, "state terminated ");
4336         if (scsi_state & MPI2_SCSI_STATE_NO_SCSI_STATUS)
4337                 strcat(desc_scsi_state, "no status ");
4338         if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_FAILED)
4339                 strcat(desc_scsi_state, "autosense failed ");
4340         if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID)
4341                 strcat(desc_scsi_state, "autosense valid ");
4342
4343         scsi_print_command(scmd);
4344
4345         if (priv_target->flags & MPT_TARGET_FLAGS_VOLUME) {
4346                 pr_warn(MPT3SAS_FMT "\t%s wwid(0x%016llx)\n", ioc->name,
4347                     device_str, (unsigned long long)priv_target->sas_address);
4348         } else {
4349                 sas_device = mpt3sas_get_sdev_from_target(ioc, priv_target);
4350                 if (sas_device) {
4351                         pr_warn(MPT3SAS_FMT
4352                                 "\tsas_address(0x%016llx), phy(%d)\n",
4353                                 ioc->name, (unsigned long long)
4354                             sas_device->sas_address, sas_device->phy);
4355                         if (sas_device->enclosure_handle != 0)
4356                                 pr_warn(MPT3SAS_FMT
4357                                   "\tenclosure_logical_id(0x%016llx),"
4358                                   "slot(%d)\n", ioc->name,
4359                                   (unsigned long long)
4360                                   sas_device->enclosure_logical_id,
4361                                   sas_device->slot);
4362                         if (sas_device->connector_name[0])
4363                                 pr_warn(MPT3SAS_FMT
4364                                   "\tenclosure level(0x%04x),"
4365                                   " connector name( %s)\n", ioc->name,
4366                                   sas_device->enclosure_level,
4367                                   sas_device->connector_name);
4368
4369                         sas_device_put(sas_device);
4370                 }
4371         }
4372
4373         pr_warn(MPT3SAS_FMT
4374                 "\thandle(0x%04x), ioc_status(%s)(0x%04x), smid(%d)\n",
4375                 ioc->name, le16_to_cpu(mpi_reply->DevHandle),
4376             desc_ioc_state, ioc_status, smid);
4377         pr_warn(MPT3SAS_FMT
4378                 "\trequest_len(%d), underflow(%d), resid(%d)\n",
4379                 ioc->name, scsi_bufflen(scmd), scmd->underflow,
4380             scsi_get_resid(scmd));
4381         pr_warn(MPT3SAS_FMT
4382                 "\ttag(%d), transfer_count(%d), sc->result(0x%08x)\n",
4383                 ioc->name, le16_to_cpu(mpi_reply->TaskTag),
4384             le32_to_cpu(mpi_reply->TransferCount), scmd->result);
4385         pr_warn(MPT3SAS_FMT
4386                 "\tscsi_status(%s)(0x%02x), scsi_state(%s)(0x%02x)\n",
4387                 ioc->name, desc_scsi_status,
4388             scsi_status, desc_scsi_state, scsi_state);
4389
4390         if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
4391                 struct sense_info data;
4392                 _scsih_normalize_sense(scmd->sense_buffer, &data);
4393                 pr_warn(MPT3SAS_FMT
4394                         "\t[sense_key,asc,ascq]: [0x%02x,0x%02x,0x%02x], count(%d)\n",
4395                         ioc->name, data.skey,
4396                     data.asc, data.ascq, le32_to_cpu(mpi_reply->SenseCount));
4397         }
4398
4399         if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID) {
4400                 response_info = le32_to_cpu(mpi_reply->ResponseInfo);
4401                 response_bytes = (u8 *)&response_info;
4402                 _scsih_response_code(ioc, response_bytes[0]);
4403         }
4404 }
4405
4406 /**
4407  * _scsih_turn_on_pfa_led - illuminate PFA LED
4408  * @ioc: per adapter object
4409  * @handle: device handle
4410  * Context: process
4411  *
4412  * Return nothing.
4413  */
4414 static void
4415 _scsih_turn_on_pfa_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
4416 {
4417         Mpi2SepReply_t mpi_reply;
4418         Mpi2SepRequest_t mpi_request;
4419         struct _sas_device *sas_device;
4420
4421         sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
4422         if (!sas_device)
4423                 return;
4424
4425         memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
4426         mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
4427         mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
4428         mpi_request.SlotStatus =
4429             cpu_to_le32(MPI2_SEP_REQ_SLOTSTATUS_PREDICTED_FAULT);
4430         mpi_request.DevHandle = cpu_to_le16(handle);
4431         mpi_request.Flags = MPI2_SEP_REQ_FLAGS_DEVHANDLE_ADDRESS;
4432         if ((mpt3sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
4433             &mpi_request)) != 0) {
4434                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
4435                 __FILE__, __LINE__, __func__);
4436                 goto out;
4437         }
4438         sas_device->pfa_led_on = 1;
4439
4440         if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
4441                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
4442                         "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
4443                         ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
4444                     le32_to_cpu(mpi_reply.IOCLogInfo)));
4445                 goto out;
4446         }
4447 out:
4448         sas_device_put(sas_device);
4449 }
4450
4451 /**
4452  * _scsih_turn_off_pfa_led - turn off Fault LED
4453  * @ioc: per adapter object
4454  * @sas_device: sas device whose PFA LED has to turned off
4455  * Context: process
4456  *
4457  * Return nothing.
4458  */
4459 static void
4460 _scsih_turn_off_pfa_led(struct MPT3SAS_ADAPTER *ioc,
4461         struct _sas_device *sas_device)
4462 {
4463         Mpi2SepReply_t mpi_reply;
4464         Mpi2SepRequest_t mpi_request;
4465
4466         memset(&mpi_request, 0, sizeof(Mpi2SepRequest_t));
4467         mpi_request.Function = MPI2_FUNCTION_SCSI_ENCLOSURE_PROCESSOR;
4468         mpi_request.Action = MPI2_SEP_REQ_ACTION_WRITE_STATUS;
4469         mpi_request.SlotStatus = 0;
4470         mpi_request.Slot = cpu_to_le16(sas_device->slot);
4471         mpi_request.DevHandle = 0;
4472         mpi_request.EnclosureHandle = cpu_to_le16(sas_device->enclosure_handle);
4473         mpi_request.Flags = MPI2_SEP_REQ_FLAGS_ENCLOSURE_SLOT_ADDRESS;
4474         if ((mpt3sas_base_scsi_enclosure_processor(ioc, &mpi_reply,
4475                 &mpi_request)) != 0) {
4476                 printk(MPT3SAS_FMT "failure at %s:%d/%s()!\n", ioc->name,
4477                 __FILE__, __LINE__, __func__);
4478                 return;
4479         }
4480
4481         if (mpi_reply.IOCStatus || mpi_reply.IOCLogInfo) {
4482                 dewtprintk(ioc, printk(MPT3SAS_FMT
4483                  "enclosure_processor: ioc_status (0x%04x), loginfo(0x%08x)\n",
4484                  ioc->name, le16_to_cpu(mpi_reply.IOCStatus),
4485                  le32_to_cpu(mpi_reply.IOCLogInfo)));
4486                 return;
4487         }
4488 }
4489
4490 /**
4491  * _scsih_send_event_to_turn_on_pfa_led - fire delayed event
4492  * @ioc: per adapter object
4493  * @handle: device handle
4494  * Context: interrupt.
4495  *
4496  * Return nothing.
4497  */
4498 static void
4499 _scsih_send_event_to_turn_on_pfa_led(struct MPT3SAS_ADAPTER *ioc, u16 handle)
4500 {
4501         struct fw_event_work *fw_event;
4502
4503         fw_event = alloc_fw_event_work(0);
4504         if (!fw_event)
4505                 return;
4506         fw_event->event = MPT3SAS_TURN_ON_PFA_LED;
4507         fw_event->device_handle = handle;
4508         fw_event->ioc = ioc;
4509         _scsih_fw_event_add(ioc, fw_event);
4510         fw_event_work_put(fw_event);
4511 }
4512
4513 /**
4514  * _scsih_smart_predicted_fault - process smart errors
4515  * @ioc: per adapter object
4516  * @handle: device handle
4517  * Context: interrupt.
4518  *
4519  * Return nothing.
4520  */
4521 static void
4522 _scsih_smart_predicted_fault(struct MPT3SAS_ADAPTER *ioc, u16 handle)
4523 {
4524         struct scsi_target *starget;
4525         struct MPT3SAS_TARGET *sas_target_priv_data;
4526         Mpi2EventNotificationReply_t *event_reply;
4527         Mpi2EventDataSasDeviceStatusChange_t *event_data;
4528         struct _sas_device *sas_device;
4529         ssize_t sz;
4530         unsigned long flags;
4531
4532         /* only handle non-raid devices */
4533         spin_lock_irqsave(&ioc->sas_device_lock, flags);
4534         sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
4535         if (!sas_device)
4536                 goto out_unlock;
4537
4538         starget = sas_device->starget;
4539         sas_target_priv_data = starget->hostdata;
4540
4541         if ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_RAID_COMPONENT) ||
4542            ((sas_target_priv_data->flags & MPT_TARGET_FLAGS_VOLUME)))
4543                 goto out_unlock;
4544
4545         if (sas_device->enclosure_handle != 0)
4546                 starget_printk(KERN_INFO, starget, "predicted fault, "
4547                         "enclosure logical id(0x%016llx), slot(%d)\n",
4548                         (unsigned long long)sas_device->enclosure_logical_id,
4549                         sas_device->slot);
4550         if (sas_device->connector_name[0] != '\0')
4551                 starget_printk(KERN_WARNING, starget, "predicted fault, "
4552                         "enclosure level(0x%04x), connector name( %s)\n",
4553                         sas_device->enclosure_level,
4554                         sas_device->connector_name);
4555         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4556
4557         if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM)
4558                 _scsih_send_event_to_turn_on_pfa_led(ioc, handle);
4559
4560         /* insert into event log */
4561         sz = offsetof(Mpi2EventNotificationReply_t, EventData) +
4562              sizeof(Mpi2EventDataSasDeviceStatusChange_t);
4563         event_reply = kzalloc(sz, GFP_KERNEL);
4564         if (!event_reply) {
4565                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4566                     ioc->name, __FILE__, __LINE__, __func__);
4567                 goto out;
4568         }
4569
4570         event_reply->Function = MPI2_FUNCTION_EVENT_NOTIFICATION;
4571         event_reply->Event =
4572             cpu_to_le16(MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE);
4573         event_reply->MsgLength = sz/4;
4574         event_reply->EventDataLength =
4575             cpu_to_le16(sizeof(Mpi2EventDataSasDeviceStatusChange_t)/4);
4576         event_data = (Mpi2EventDataSasDeviceStatusChange_t *)
4577             event_reply->EventData;
4578         event_data->ReasonCode = MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA;
4579         event_data->ASC = 0x5D;
4580         event_data->DevHandle = cpu_to_le16(handle);
4581         event_data->SASAddress = cpu_to_le64(sas_target_priv_data->sas_address);
4582         mpt3sas_ctl_add_to_event_log(ioc, event_reply);
4583         kfree(event_reply);
4584 out:
4585         if (sas_device)
4586                 sas_device_put(sas_device);
4587         return;
4588
4589 out_unlock:
4590         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
4591         goto out;
4592 }
4593
4594 /**
4595  * _scsih_io_done - scsi request callback
4596  * @ioc: per adapter object
4597  * @smid: system request message index
4598  * @msix_index: MSIX table index supplied by the OS
4599  * @reply: reply message frame(lower 32bit addr)
4600  *
4601  * Callback handler when using _scsih_qcmd.
4602  *
4603  * Return 1 meaning mf should be freed from _base_interrupt
4604  *        0 means the mf is freed from this function.
4605  */
4606 static u8
4607 _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
4608 {
4609         Mpi2SCSIIORequest_t *mpi_request;
4610         Mpi2SCSIIOReply_t *mpi_reply;
4611         struct scsi_cmnd *scmd;
4612         u16 ioc_status;
4613         u32 xfer_cnt;
4614         u8 scsi_state;
4615         u8 scsi_status;
4616         u32 log_info;
4617         struct MPT3SAS_DEVICE *sas_device_priv_data;
4618         u32 response_code = 0;
4619         unsigned long flags;
4620
4621         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
4622         scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
4623         if (scmd == NULL)
4624                 return 1;
4625
4626         if (ata_12_16_cmd(scmd))
4627                 scsi_internal_device_unblock(scmd->device, SDEV_RUNNING);
4628
4629         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
4630
4631         if (mpi_reply == NULL) {
4632                 scmd->result = DID_OK << 16;
4633                 goto out;
4634         }
4635
4636         sas_device_priv_data = scmd->device->hostdata;
4637         if (!sas_device_priv_data || !sas_device_priv_data->sas_target ||
4638              sas_device_priv_data->sas_target->deleted) {
4639                 scmd->result = DID_NO_CONNECT << 16;
4640                 goto out;
4641         }
4642         ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
4643
4644         /*
4645          * WARPDRIVE: If direct_io is set then it is directIO,
4646          * the failed direct I/O should be redirected to volume
4647          */
4648         if (mpt3sas_scsi_direct_io_get(ioc, smid) &&
4649              ((ioc_status & MPI2_IOCSTATUS_MASK)
4650               != MPI2_IOCSTATUS_SCSI_TASK_TERMINATED)) {
4651                 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
4652                 ioc->scsi_lookup[smid - 1].scmd = scmd;
4653                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
4654                 mpt3sas_scsi_direct_io_set(ioc, smid, 0);
4655                 memcpy(mpi_request->CDB.CDB32, scmd->cmnd, scmd->cmd_len);
4656                 mpi_request->DevHandle =
4657                     cpu_to_le16(sas_device_priv_data->sas_target->handle);
4658                 mpt3sas_base_put_smid_scsi_io(ioc, smid,
4659                     sas_device_priv_data->sas_target->handle);
4660                 return 0;
4661         }
4662         /* turning off TLR */
4663         scsi_state = mpi_reply->SCSIState;
4664         if (scsi_state & MPI2_SCSI_STATE_RESPONSE_INFO_VALID)
4665                 response_code =
4666                     le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF;
4667         if (!sas_device_priv_data->tlr_snoop_check) {
4668                 sas_device_priv_data->tlr_snoop_check++;
4669                 if (!ioc->is_warpdrive &&
4670                     !scsih_is_raid(&scmd->device->sdev_gendev) &&
4671                     sas_is_tlr_enabled(scmd->device) &&
4672                     response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) {
4673                         sas_disable_tlr(scmd->device);
4674                         sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n");
4675                 }
4676         }
4677
4678         xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
4679         scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
4680         if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
4681                 log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);
4682         else
4683                 log_info = 0;
4684         ioc_status &= MPI2_IOCSTATUS_MASK;
4685         scsi_status = mpi_reply->SCSIStatus;
4686
4687         if (ioc_status == MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN && xfer_cnt == 0 &&
4688             (scsi_status == MPI2_SCSI_STATUS_BUSY ||
4689              scsi_status == MPI2_SCSI_STATUS_RESERVATION_CONFLICT ||
4690              scsi_status == MPI2_SCSI_STATUS_TASK_SET_FULL)) {
4691                 ioc_status = MPI2_IOCSTATUS_SUCCESS;
4692         }
4693
4694         if (scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID) {
4695                 struct sense_info data;
4696                 const void *sense_data = mpt3sas_base_get_sense_buffer(ioc,
4697                     smid);
4698                 u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
4699                     le32_to_cpu(mpi_reply->SenseCount));
4700                 memcpy(scmd->sense_buffer, sense_data, sz);
4701                 _scsih_normalize_sense(scmd->sense_buffer, &data);
4702                 /* failure prediction threshold exceeded */
4703                 if (data.asc == 0x5D)
4704                         _scsih_smart_predicted_fault(ioc,
4705                             le16_to_cpu(mpi_reply->DevHandle));
4706                 mpt3sas_trigger_scsi(ioc, data.skey, data.asc, data.ascq);
4707
4708                 if ((ioc->logging_level & MPT_DEBUG_REPLY) &&
4709                      ((scmd->sense_buffer[2] == UNIT_ATTENTION) ||
4710                      (scmd->sense_buffer[2] == MEDIUM_ERROR) ||
4711                      (scmd->sense_buffer[2] == HARDWARE_ERROR)))
4712                         _scsih_scsi_ioc_info(ioc, scmd, mpi_reply, smid);
4713         }
4714         switch (ioc_status) {
4715         case MPI2_IOCSTATUS_BUSY:
4716         case MPI2_IOCSTATUS_INSUFFICIENT_RESOURCES:
4717                 scmd->result = SAM_STAT_BUSY;
4718                 break;
4719
4720         case MPI2_IOCSTATUS_SCSI_DEVICE_NOT_THERE:
4721                 scmd->result = DID_NO_CONNECT << 16;
4722                 break;
4723
4724         case MPI2_IOCSTATUS_SCSI_IOC_TERMINATED:
4725                 if (sas_device_priv_data->block) {
4726                         scmd->result = DID_TRANSPORT_DISRUPTED << 16;
4727                         goto out;
4728                 }
4729                 if (log_info == 0x31110630) {
4730                         if (scmd->retries > 2) {
4731                                 scmd->result = DID_NO_CONNECT << 16;
4732                                 scsi_device_set_state(scmd->device,
4733                                     SDEV_OFFLINE);
4734                         } else {
4735                                 scmd->result = DID_SOFT_ERROR << 16;
4736                                 scmd->device->expecting_cc_ua = 1;
4737                         }
4738                         break;
4739                 } else if (log_info == VIRTUAL_IO_FAILED_RETRY) {
4740                         scmd->result = DID_RESET << 16;
4741                         break;
4742                 }
4743                 scmd->result = DID_SOFT_ERROR << 16;
4744                 break;
4745         case MPI2_IOCSTATUS_SCSI_TASK_TERMINATED:
4746         case MPI2_IOCSTATUS_SCSI_EXT_TERMINATED:
4747                 scmd->result = DID_RESET << 16;
4748                 break;
4749
4750         case MPI2_IOCSTATUS_SCSI_RESIDUAL_MISMATCH:
4751                 if ((xfer_cnt == 0) || (scmd->underflow > xfer_cnt))
4752                         scmd->result = DID_SOFT_ERROR << 16;
4753                 else
4754                         scmd->result = (DID_OK << 16) | scsi_status;
4755                 break;
4756
4757         case MPI2_IOCSTATUS_SCSI_DATA_UNDERRUN:
4758                 scmd->result = (DID_OK << 16) | scsi_status;
4759
4760                 if ((scsi_state & MPI2_SCSI_STATE_AUTOSENSE_VALID))
4761                         break;
4762
4763                 if (xfer_cnt < scmd->underflow) {
4764                         if (scsi_status == SAM_STAT_BUSY)
4765                                 scmd->result = SAM_STAT_BUSY;
4766                         else
4767                                 scmd->result = DID_SOFT_ERROR << 16;
4768                 } else if (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
4769                      MPI2_SCSI_STATE_NO_SCSI_STATUS))
4770                         scmd->result = DID_SOFT_ERROR << 16;
4771                 else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
4772                         scmd->result = DID_RESET << 16;
4773                 else if (!xfer_cnt && scmd->cmnd[0] == REPORT_LUNS) {
4774                         mpi_reply->SCSIState = MPI2_SCSI_STATE_AUTOSENSE_VALID;
4775                         mpi_reply->SCSIStatus = SAM_STAT_CHECK_CONDITION;
4776                         scmd->result = (DRIVER_SENSE << 24) |
4777                             SAM_STAT_CHECK_CONDITION;
4778                         scmd->sense_buffer[0] = 0x70;
4779                         scmd->sense_buffer[2] = ILLEGAL_REQUEST;
4780                         scmd->sense_buffer[12] = 0x20;
4781                         scmd->sense_buffer[13] = 0;
4782                 }
4783                 break;
4784
4785         case MPI2_IOCSTATUS_SCSI_DATA_OVERRUN:
4786                 scsi_set_resid(scmd, 0);
4787         case MPI2_IOCSTATUS_SCSI_RECOVERED_ERROR:
4788         case MPI2_IOCSTATUS_SUCCESS:
4789                 scmd->result = (DID_OK << 16) | scsi_status;
4790                 if (response_code ==
4791                     MPI2_SCSITASKMGMT_RSP_INVALID_FRAME ||
4792                     (scsi_state & (MPI2_SCSI_STATE_AUTOSENSE_FAILED |
4793                      MPI2_SCSI_STATE_NO_SCSI_STATUS)))
4794                         scmd->result = DID_SOFT_ERROR << 16;
4795                 else if (scsi_state & MPI2_SCSI_STATE_TERMINATED)
4796                         scmd->result = DID_RESET << 16;
4797                 break;
4798
4799         case MPI2_IOCSTATUS_EEDP_GUARD_ERROR:
4800         case MPI2_IOCSTATUS_EEDP_REF_TAG_ERROR:
4801         case MPI2_IOCSTATUS_EEDP_APP_TAG_ERROR:
4802                 _scsih_eedp_error_handling(scmd, ioc_status);
4803                 break;
4804
4805         case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
4806         case MPI2_IOCSTATUS_INVALID_FUNCTION:
4807         case MPI2_IOCSTATUS_INVALID_SGL:
4808         case MPI2_IOCSTATUS_INTERNAL_ERROR:
4809         case MPI2_IOCSTATUS_INVALID_FIELD:
4810         case MPI2_IOCSTATUS_INVALID_STATE:
4811         case MPI2_IOCSTATUS_SCSI_IO_DATA_ERROR:
4812         case MPI2_IOCSTATUS_SCSI_TASK_MGMT_FAILED:
4813         case MPI2_IOCSTATUS_INSUFFICIENT_POWER:
4814         default:
4815                 scmd->result = DID_SOFT_ERROR << 16;
4816                 break;
4817
4818         }
4819
4820         if (scmd->result && (ioc->logging_level & MPT_DEBUG_REPLY))
4821                 _scsih_scsi_ioc_info(ioc , scmd, mpi_reply, smid);
4822
4823  out:
4824
4825         scsi_dma_unmap(scmd);
4826
4827         scmd->scsi_done(scmd);
4828         return 1;
4829 }
4830
4831 /**
4832  * _scsih_sas_host_refresh - refreshing sas host object contents
4833  * @ioc: per adapter object
4834  * Context: user
4835  *
4836  * During port enable, fw will send topology events for every device. Its
4837  * possible that the handles may change from the previous setting, so this
4838  * code keeping handles updating if changed.
4839  *
4840  * Return nothing.
4841  */
4842 static void
4843 _scsih_sas_host_refresh(struct MPT3SAS_ADAPTER *ioc)
4844 {
4845         u16 sz;
4846         u16 ioc_status;
4847         int i;
4848         Mpi2ConfigReply_t mpi_reply;
4849         Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
4850         u16 attached_handle;
4851         u8 link_rate;
4852
4853         dtmprintk(ioc, pr_info(MPT3SAS_FMT
4854             "updating handles for sas_host(0x%016llx)\n",
4855             ioc->name, (unsigned long long)ioc->sas_hba.sas_address));
4856
4857         sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys
4858             * sizeof(Mpi2SasIOUnit0PhyData_t));
4859         sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
4860         if (!sas_iounit_pg0) {
4861                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4862                     ioc->name, __FILE__, __LINE__, __func__);
4863                 return;
4864         }
4865
4866         if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
4867             sas_iounit_pg0, sz)) != 0)
4868                 goto out;
4869         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
4870         if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
4871                 goto out;
4872         for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
4873                 link_rate = sas_iounit_pg0->PhyData[i].NegotiatedLinkRate >> 4;
4874                 if (i == 0)
4875                         ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
4876                             PhyData[0].ControllerDevHandle);
4877                 ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
4878                 attached_handle = le16_to_cpu(sas_iounit_pg0->PhyData[i].
4879                     AttachedDevHandle);
4880                 if (attached_handle && link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
4881                         link_rate = MPI2_SAS_NEG_LINK_RATE_1_5;
4882                 mpt3sas_transport_update_links(ioc, ioc->sas_hba.sas_address,
4883                     attached_handle, i, link_rate);
4884         }
4885  out:
4886         kfree(sas_iounit_pg0);
4887 }
4888
4889 /**
4890  * _scsih_sas_host_add - create sas host object
4891  * @ioc: per adapter object
4892  *
4893  * Creating host side data object, stored in ioc->sas_hba
4894  *
4895  * Return nothing.
4896  */
4897 static void
4898 _scsih_sas_host_add(struct MPT3SAS_ADAPTER *ioc)
4899 {
4900         int i;
4901         Mpi2ConfigReply_t mpi_reply;
4902         Mpi2SasIOUnitPage0_t *sas_iounit_pg0 = NULL;
4903         Mpi2SasIOUnitPage1_t *sas_iounit_pg1 = NULL;
4904         Mpi2SasPhyPage0_t phy_pg0;
4905         Mpi2SasDevicePage0_t sas_device_pg0;
4906         Mpi2SasEnclosurePage0_t enclosure_pg0;
4907         u16 ioc_status;
4908         u16 sz;
4909         u8 device_missing_delay;
4910         u8 num_phys;
4911
4912         mpt3sas_config_get_number_hba_phys(ioc, &num_phys);
4913         if (!num_phys) {
4914                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4915                     ioc->name, __FILE__, __LINE__, __func__);
4916                 return;
4917         }
4918         ioc->sas_hba.phy = kcalloc(num_phys,
4919             sizeof(struct _sas_phy), GFP_KERNEL);
4920         if (!ioc->sas_hba.phy) {
4921                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4922                     ioc->name, __FILE__, __LINE__, __func__);
4923                 goto out;
4924         }
4925         ioc->sas_hba.num_phys = num_phys;
4926
4927         /* sas_iounit page 0 */
4928         sz = offsetof(Mpi2SasIOUnitPage0_t, PhyData) + (ioc->sas_hba.num_phys *
4929             sizeof(Mpi2SasIOUnit0PhyData_t));
4930         sas_iounit_pg0 = kzalloc(sz, GFP_KERNEL);
4931         if (!sas_iounit_pg0) {
4932                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4933                     ioc->name, __FILE__, __LINE__, __func__);
4934                 return;
4935         }
4936         if ((mpt3sas_config_get_sas_iounit_pg0(ioc, &mpi_reply,
4937             sas_iounit_pg0, sz))) {
4938                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4939                     ioc->name, __FILE__, __LINE__, __func__);
4940                 goto out;
4941         }
4942         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4943             MPI2_IOCSTATUS_MASK;
4944         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4945                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4946                     ioc->name, __FILE__, __LINE__, __func__);
4947                 goto out;
4948         }
4949
4950         /* sas_iounit page 1 */
4951         sz = offsetof(Mpi2SasIOUnitPage1_t, PhyData) + (ioc->sas_hba.num_phys *
4952             sizeof(Mpi2SasIOUnit1PhyData_t));
4953         sas_iounit_pg1 = kzalloc(sz, GFP_KERNEL);
4954         if (!sas_iounit_pg1) {
4955                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4956                     ioc->name, __FILE__, __LINE__, __func__);
4957                 goto out;
4958         }
4959         if ((mpt3sas_config_get_sas_iounit_pg1(ioc, &mpi_reply,
4960             sas_iounit_pg1, sz))) {
4961                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4962                     ioc->name, __FILE__, __LINE__, __func__);
4963                 goto out;
4964         }
4965         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4966             MPI2_IOCSTATUS_MASK;
4967         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4968                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4969                     ioc->name, __FILE__, __LINE__, __func__);
4970                 goto out;
4971         }
4972
4973         ioc->io_missing_delay =
4974             sas_iounit_pg1->IODeviceMissingDelay;
4975         device_missing_delay =
4976             sas_iounit_pg1->ReportDeviceMissingDelay;
4977         if (device_missing_delay & MPI2_SASIOUNIT1_REPORT_MISSING_UNIT_16)
4978                 ioc->device_missing_delay = (device_missing_delay &
4979                     MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK) * 16;
4980         else
4981                 ioc->device_missing_delay = device_missing_delay &
4982                     MPI2_SASIOUNIT1_REPORT_MISSING_TIMEOUT_MASK;
4983
4984         ioc->sas_hba.parent_dev = &ioc->shost->shost_gendev;
4985         for (i = 0; i < ioc->sas_hba.num_phys ; i++) {
4986                 if ((mpt3sas_config_get_phy_pg0(ioc, &mpi_reply, &phy_pg0,
4987                     i))) {
4988                         pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4989                             ioc->name, __FILE__, __LINE__, __func__);
4990                         goto out;
4991                 }
4992                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
4993                     MPI2_IOCSTATUS_MASK;
4994                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
4995                         pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
4996                             ioc->name, __FILE__, __LINE__, __func__);
4997                         goto out;
4998                 }
4999
5000                 if (i == 0)
5001                         ioc->sas_hba.handle = le16_to_cpu(sas_iounit_pg0->
5002                             PhyData[0].ControllerDevHandle);
5003                 ioc->sas_hba.phy[i].handle = ioc->sas_hba.handle;
5004                 ioc->sas_hba.phy[i].phy_id = i;
5005                 mpt3sas_transport_add_host_phy(ioc, &ioc->sas_hba.phy[i],
5006                     phy_pg0, ioc->sas_hba.parent_dev);
5007         }
5008         if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
5009             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, ioc->sas_hba.handle))) {
5010                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5011                     ioc->name, __FILE__, __LINE__, __func__);
5012                 goto out;
5013         }
5014         ioc->sas_hba.enclosure_handle =
5015             le16_to_cpu(sas_device_pg0.EnclosureHandle);
5016         ioc->sas_hba.sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
5017         pr_info(MPT3SAS_FMT
5018                 "host_add: handle(0x%04x), sas_addr(0x%016llx), phys(%d)\n",
5019                 ioc->name, ioc->sas_hba.handle,
5020             (unsigned long long) ioc->sas_hba.sas_address,
5021             ioc->sas_hba.num_phys) ;
5022
5023         if (ioc->sas_hba.enclosure_handle) {
5024                 if (!(mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
5025                     &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
5026                    ioc->sas_hba.enclosure_handle)))
5027                         ioc->sas_hba.enclosure_logical_id =
5028                             le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
5029         }
5030
5031  out:
5032         kfree(sas_iounit_pg1);
5033         kfree(sas_iounit_pg0);
5034 }
5035
5036 /**
5037  * _scsih_expander_add -  creating expander object
5038  * @ioc: per adapter object
5039  * @handle: expander handle
5040  *
5041  * Creating expander object, stored in ioc->sas_expander_list.
5042  *
5043  * Return 0 for success, else error.
5044  */
5045 static int
5046 _scsih_expander_add(struct MPT3SAS_ADAPTER *ioc, u16 handle)
5047 {
5048         struct _sas_node *sas_expander;
5049         Mpi2ConfigReply_t mpi_reply;
5050         Mpi2ExpanderPage0_t expander_pg0;
5051         Mpi2ExpanderPage1_t expander_pg1;
5052         Mpi2SasEnclosurePage0_t enclosure_pg0;
5053         u32 ioc_status;
5054         u16 parent_handle;
5055         u64 sas_address, sas_address_parent = 0;
5056         int i;
5057         unsigned long flags;
5058         struct _sas_port *mpt3sas_port = NULL;
5059
5060         int rc = 0;
5061
5062         if (!handle)
5063                 return -1;
5064
5065         if (ioc->shost_recovery || ioc->pci_error_recovery)
5066                 return -1;
5067
5068         if ((mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
5069             MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) {
5070                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5071                     ioc->name, __FILE__, __LINE__, __func__);
5072                 return -1;
5073         }
5074
5075         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
5076             MPI2_IOCSTATUS_MASK;
5077         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
5078                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5079                     ioc->name, __FILE__, __LINE__, __func__);
5080                 return -1;
5081         }
5082
5083         /* handle out of order topology events */
5084         parent_handle = le16_to_cpu(expander_pg0.ParentDevHandle);
5085         if (_scsih_get_sas_address(ioc, parent_handle, &sas_address_parent)
5086             != 0) {
5087                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5088                     ioc->name, __FILE__, __LINE__, __func__);
5089                 return -1;
5090         }
5091         if (sas_address_parent != ioc->sas_hba.sas_address) {
5092                 spin_lock_irqsave(&ioc->sas_node_lock, flags);
5093                 sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
5094                     sas_address_parent);
5095                 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
5096                 if (!sas_expander) {
5097                         rc = _scsih_expander_add(ioc, parent_handle);
5098                         if (rc != 0)
5099                                 return rc;
5100                 }
5101         }
5102
5103         spin_lock_irqsave(&ioc->sas_node_lock, flags);
5104         sas_address = le64_to_cpu(expander_pg0.SASAddress);
5105         sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
5106             sas_address);
5107         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
5108
5109         if (sas_expander)
5110                 return 0;
5111
5112         sas_expander = kzalloc(sizeof(struct _sas_node),
5113             GFP_KERNEL);
5114         if (!sas_expander) {
5115                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5116                     ioc->name, __FILE__, __LINE__, __func__);
5117                 return -1;
5118         }
5119
5120         sas_expander->handle = handle;
5121         sas_expander->num_phys = expander_pg0.NumPhys;
5122         sas_expander->sas_address_parent = sas_address_parent;
5123         sas_expander->sas_address = sas_address;
5124
5125         pr_info(MPT3SAS_FMT "expander_add: handle(0x%04x)," \
5126             " parent(0x%04x), sas_addr(0x%016llx), phys(%d)\n", ioc->name,
5127             handle, parent_handle, (unsigned long long)
5128             sas_expander->sas_address, sas_expander->num_phys);
5129
5130         if (!sas_expander->num_phys)
5131                 goto out_fail;
5132         sas_expander->phy = kcalloc(sas_expander->num_phys,
5133             sizeof(struct _sas_phy), GFP_KERNEL);
5134         if (!sas_expander->phy) {
5135                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5136                     ioc->name, __FILE__, __LINE__, __func__);
5137                 rc = -1;
5138                 goto out_fail;
5139         }
5140
5141         INIT_LIST_HEAD(&sas_expander->sas_port_list);
5142         mpt3sas_port = mpt3sas_transport_port_add(ioc, handle,
5143             sas_address_parent);
5144         if (!mpt3sas_port) {
5145                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5146                     ioc->name, __FILE__, __LINE__, __func__);
5147                 rc = -1;
5148                 goto out_fail;
5149         }
5150         sas_expander->parent_dev = &mpt3sas_port->rphy->dev;
5151
5152         for (i = 0 ; i < sas_expander->num_phys ; i++) {
5153                 if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply,
5154                     &expander_pg1, i, handle))) {
5155                         pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5156                             ioc->name, __FILE__, __LINE__, __func__);
5157                         rc = -1;
5158                         goto out_fail;
5159                 }
5160                 sas_expander->phy[i].handle = handle;
5161                 sas_expander->phy[i].phy_id = i;
5162
5163                 if ((mpt3sas_transport_add_expander_phy(ioc,
5164                     &sas_expander->phy[i], expander_pg1,
5165                     sas_expander->parent_dev))) {
5166                         pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5167                             ioc->name, __FILE__, __LINE__, __func__);
5168                         rc = -1;
5169                         goto out_fail;
5170                 }
5171         }
5172
5173         if (sas_expander->enclosure_handle) {
5174                 if (!(mpt3sas_config_get_enclosure_pg0(ioc, &mpi_reply,
5175                     &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
5176                    sas_expander->enclosure_handle)))
5177                         sas_expander->enclosure_logical_id =
5178                             le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
5179         }
5180
5181         _scsih_expander_node_add(ioc, sas_expander);
5182          return 0;
5183
5184  out_fail:
5185
5186         if (mpt3sas_port)
5187                 mpt3sas_transport_port_remove(ioc, sas_expander->sas_address,
5188                     sas_address_parent);
5189         kfree(sas_expander);
5190         return rc;
5191 }
5192
5193 /**
5194  * mpt3sas_expander_remove - removing expander object
5195  * @ioc: per adapter object
5196  * @sas_address: expander sas_address
5197  *
5198  * Return nothing.
5199  */
5200 void
5201 mpt3sas_expander_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address)
5202 {
5203         struct _sas_node *sas_expander;
5204         unsigned long flags;
5205
5206         if (ioc->shost_recovery)
5207                 return;
5208
5209         spin_lock_irqsave(&ioc->sas_node_lock, flags);
5210         sas_expander = mpt3sas_scsih_expander_find_by_sas_address(ioc,
5211             sas_address);
5212         if (sas_expander)
5213                 list_del(&sas_expander->list);
5214         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
5215         if (sas_expander)
5216                 _scsih_expander_node_remove(ioc, sas_expander);
5217 }
5218
5219 /**
5220  * _scsih_done -  internal SCSI_IO callback handler.
5221  * @ioc: per adapter object
5222  * @smid: system request message index
5223  * @msix_index: MSIX table index supplied by the OS
5224  * @reply: reply message frame(lower 32bit addr)
5225  *
5226  * Callback handler when sending internal generated SCSI_IO.
5227  * The callback index passed is `ioc->scsih_cb_idx`
5228  *
5229  * Return 1 meaning mf should be freed from _base_interrupt
5230  *        0 means the mf is freed from this function.
5231  */
5232 static u8
5233 _scsih_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
5234 {
5235         MPI2DefaultReply_t *mpi_reply;
5236
5237         mpi_reply =  mpt3sas_base_get_reply_virt_addr(ioc, reply);
5238         if (ioc->scsih_cmds.status == MPT3_CMD_NOT_USED)
5239                 return 1;
5240         if (ioc->scsih_cmds.smid != smid)
5241                 return 1;
5242         ioc->scsih_cmds.status |= MPT3_CMD_COMPLETE;
5243         if (mpi_reply) {
5244                 memcpy(ioc->scsih_cmds.reply, mpi_reply,
5245                     mpi_reply->MsgLength*4);
5246                 ioc->scsih_cmds.status |= MPT3_CMD_REPLY_VALID;
5247         }
5248         ioc->scsih_cmds.status &= ~MPT3_CMD_PENDING;
5249         complete(&ioc->scsih_cmds.done);
5250         return 1;
5251 }
5252
5253
5254
5255
5256 #define MPT3_MAX_LUNS (255)
5257
5258
5259 /**
5260  * _scsih_check_access_status - check access flags
5261  * @ioc: per adapter object
5262  * @sas_address: sas address
5263  * @handle: sas device handle
5264  * @access_flags: errors returned during discovery of the device
5265  *
5266  * Return 0 for success, else failure
5267  */
5268 static u8
5269 _scsih_check_access_status(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
5270         u16 handle, u8 access_status)
5271 {
5272         u8 rc = 1;
5273         char *desc = NULL;
5274
5275         switch (access_status) {
5276         case MPI2_SAS_DEVICE0_ASTATUS_NO_ERRORS:
5277         case MPI2_SAS_DEVICE0_ASTATUS_SATA_NEEDS_INITIALIZATION:
5278                 rc = 0;
5279                 break;
5280         case MPI2_SAS_DEVICE0_ASTATUS_SATA_CAPABILITY_FAILED:
5281                 desc = "sata capability failed";
5282                 break;
5283         case MPI2_SAS_DEVICE0_ASTATUS_SATA_AFFILIATION_CONFLICT:
5284                 desc = "sata affiliation conflict";
5285                 break;
5286         case MPI2_SAS_DEVICE0_ASTATUS_ROUTE_NOT_ADDRESSABLE:
5287                 desc = "route not addressable";
5288                 break;
5289         case MPI2_SAS_DEVICE0_ASTATUS_SMP_ERROR_NOT_ADDRESSABLE:
5290                 desc = "smp error not addressable";
5291                 break;
5292         case MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED:
5293                 desc = "device blocked";
5294                 break;
5295         case MPI2_SAS_DEVICE0_ASTATUS_SATA_INIT_FAILED:
5296         case MPI2_SAS_DEVICE0_ASTATUS_SIF_UNKNOWN:
5297         case MPI2_SAS_DEVICE0_ASTATUS_SIF_AFFILIATION_CONFLICT:
5298         case MPI2_SAS_DEVICE0_ASTATUS_SIF_DIAG:
5299         case MPI2_SAS_DEVICE0_ASTATUS_SIF_IDENTIFICATION:
5300         case MPI2_SAS_DEVICE0_ASTATUS_SIF_CHECK_POWER:
5301         case MPI2_SAS_DEVICE0_ASTATUS_SIF_PIO_SN:
5302         case MPI2_SAS_DEVICE0_ASTATUS_SIF_MDMA_SN:
5303         case MPI2_SAS_DEVICE0_ASTATUS_SIF_UDMA_SN:
5304         case MPI2_SAS_DEVICE0_ASTATUS_SIF_ZONING_VIOLATION:
5305         case MPI2_SAS_DEVICE0_ASTATUS_SIF_NOT_ADDRESSABLE:
5306         case MPI2_SAS_DEVICE0_ASTATUS_SIF_MAX:
5307                 desc = "sata initialization failed";
5308                 break;
5309         default:
5310                 desc = "unknown";
5311                 break;
5312         }
5313
5314         if (!rc)
5315                 return 0;
5316
5317         pr_err(MPT3SAS_FMT
5318                 "discovery errors(%s): sas_address(0x%016llx), handle(0x%04x)\n",
5319                 ioc->name, desc, (unsigned long long)sas_address, handle);
5320         return rc;
5321 }
5322
5323 /**
5324  * _scsih_check_device - checking device responsiveness
5325  * @ioc: per adapter object
5326  * @parent_sas_address: sas address of parent expander or sas host
5327  * @handle: attached device handle
5328  * @phy_numberv: phy number
5329  * @link_rate: new link rate
5330  *
5331  * Returns nothing.
5332  */
5333 static void
5334 _scsih_check_device(struct MPT3SAS_ADAPTER *ioc,
5335         u64 parent_sas_address, u16 handle, u8 phy_number, u8 link_rate)
5336 {
5337         Mpi2ConfigReply_t mpi_reply;
5338         Mpi2SasDevicePage0_t sas_device_pg0;
5339         struct _sas_device *sas_device;
5340         u32 ioc_status;
5341         unsigned long flags;
5342         u64 sas_address;
5343         struct scsi_target *starget;
5344         struct MPT3SAS_TARGET *sas_target_priv_data;
5345         u32 device_info;
5346
5347
5348         if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
5349             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle)))
5350                 return;
5351
5352         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) & MPI2_IOCSTATUS_MASK;
5353         if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
5354                 return;
5355
5356         /* wide port handling ~ we need only handle device once for the phy that
5357          * is matched in sas device page zero
5358          */
5359         if (phy_number != sas_device_pg0.PhyNum)
5360                 return;
5361
5362         /* check if this is end device */
5363         device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
5364         if (!(_scsih_is_end_device(device_info)))
5365                 return;
5366
5367         spin_lock_irqsave(&ioc->sas_device_lock, flags);
5368         sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
5369         sas_device = __mpt3sas_get_sdev_by_addr(ioc,
5370             sas_address);
5371
5372         if (!sas_device)
5373                 goto out_unlock;
5374
5375         if (unlikely(sas_device->handle != handle)) {
5376                 starget = sas_device->starget;
5377                 sas_target_priv_data = starget->hostdata;
5378                 starget_printk(KERN_INFO, starget,
5379                         "handle changed from(0x%04x) to (0x%04x)!!!\n",
5380                         sas_device->handle, handle);
5381                 sas_target_priv_data->handle = handle;
5382                 sas_device->handle = handle;
5383                 if (sas_device_pg0.Flags &
5384                      MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
5385                         sas_device->enclosure_level =
5386                                 le16_to_cpu(sas_device_pg0.EnclosureLevel);
5387                         memcpy(sas_device->connector_name,
5388                                 sas_device_pg0.ConnectorName, 4);
5389                         sas_device->connector_name[4] = '\0';
5390                 } else {
5391                         sas_device->enclosure_level = 0;
5392                         sas_device->connector_name[0] = '\0';
5393                 }
5394         }
5395
5396         /* check if device is present */
5397         if (!(le16_to_cpu(sas_device_pg0.Flags) &
5398             MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
5399                 pr_err(MPT3SAS_FMT
5400                         "device is not present handle(0x%04x), flags!!!\n",
5401                         ioc->name, handle);
5402                 goto out_unlock;
5403         }
5404
5405         /* check if there were any issues with discovery */
5406         if (_scsih_check_access_status(ioc, sas_address, handle,
5407             sas_device_pg0.AccessStatus))
5408                 goto out_unlock;
5409
5410         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5411         _scsih_ublock_io_device(ioc, sas_address);
5412
5413         if (sas_device)
5414                 sas_device_put(sas_device);
5415         return;
5416
5417 out_unlock:
5418         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5419         if (sas_device)
5420                 sas_device_put(sas_device);
5421 }
5422
5423 /**
5424  * _scsih_add_device -  creating sas device object
5425  * @ioc: per adapter object
5426  * @handle: sas device handle
5427  * @phy_num: phy number end device attached to
5428  * @is_pd: is this hidden raid component
5429  *
5430  * Creating end device object, stored in ioc->sas_device_list.
5431  *
5432  * Returns 0 for success, non-zero for failure.
5433  */
5434 static int
5435 _scsih_add_device(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phy_num,
5436         u8 is_pd)
5437 {
5438         Mpi2ConfigReply_t mpi_reply;
5439         Mpi2SasDevicePage0_t sas_device_pg0;
5440         Mpi2SasEnclosurePage0_t enclosure_pg0;
5441         struct _sas_device *sas_device;
5442         u32 ioc_status;
5443         u64 sas_address;
5444         u32 device_info;
5445
5446         if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
5447             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
5448                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5449                     ioc->name, __FILE__, __LINE__, __func__);
5450                 return -1;
5451         }
5452
5453         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
5454             MPI2_IOCSTATUS_MASK;
5455         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
5456                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5457                     ioc->name, __FILE__, __LINE__, __func__);
5458                 return -1;
5459         }
5460
5461         /* check if this is end device */
5462         device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
5463         if (!(_scsih_is_end_device(device_info)))
5464                 return -1;
5465         sas_address = le64_to_cpu(sas_device_pg0.SASAddress);
5466
5467         /* check if device is present */
5468         if (!(le16_to_cpu(sas_device_pg0.Flags) &
5469             MPI2_SAS_DEVICE0_FLAGS_DEVICE_PRESENT)) {
5470                 pr_err(MPT3SAS_FMT "device is not present handle(0x04%x)!!!\n",
5471                         ioc->name, handle);
5472                 return -1;
5473         }
5474
5475         /* check if there were any issues with discovery */
5476         if (_scsih_check_access_status(ioc, sas_address, handle,
5477             sas_device_pg0.AccessStatus))
5478                 return -1;
5479
5480         sas_device = mpt3sas_get_sdev_by_addr(ioc,
5481                                         sas_address);
5482         if (sas_device) {
5483                 sas_device_put(sas_device);
5484                 return -1;
5485         }
5486
5487         sas_device = kzalloc(sizeof(struct _sas_device),
5488             GFP_KERNEL);
5489         if (!sas_device) {
5490                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5491                     ioc->name, __FILE__, __LINE__, __func__);
5492                 return 0;
5493         }
5494
5495         kref_init(&sas_device->refcount);
5496         sas_device->handle = handle;
5497         if (_scsih_get_sas_address(ioc,
5498             le16_to_cpu(sas_device_pg0.ParentDevHandle),
5499             &sas_device->sas_address_parent) != 0)
5500                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
5501                     ioc->name, __FILE__, __LINE__, __func__);
5502         sas_device->enclosure_handle =
5503             le16_to_cpu(sas_device_pg0.EnclosureHandle);
5504         if (sas_device->enclosure_handle != 0)
5505                 sas_device->slot =
5506                     le16_to_cpu(sas_device_pg0.Slot);
5507         sas_device->device_info = device_info;
5508         sas_device->sas_address = sas_address;
5509         sas_device->phy = sas_device_pg0.PhyNum;
5510         sas_device->fast_path = (le16_to_cpu(sas_device_pg0.Flags) &
5511             MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE) ? 1 : 0;
5512
5513         if (sas_device_pg0.Flags & MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
5514                 sas_device->enclosure_level =
5515                         le16_to_cpu(sas_device_pg0.EnclosureLevel);
5516                 memcpy(sas_device->connector_name,
5517                         sas_device_pg0.ConnectorName, 4);
5518                 sas_device->connector_name[4] = '\0';
5519         } else {
5520                 sas_device->enclosure_level = 0;
5521                 sas_device->connector_name[0] = '\0';
5522         }
5523         /* get enclosure_logical_id */
5524         if (sas_device->enclosure_handle && !(mpt3sas_config_get_enclosure_pg0(
5525            ioc, &mpi_reply, &enclosure_pg0, MPI2_SAS_ENCLOS_PGAD_FORM_HANDLE,
5526            sas_device->enclosure_handle)))
5527                 sas_device->enclosure_logical_id =
5528                     le64_to_cpu(enclosure_pg0.EnclosureLogicalID);
5529
5530         /* get device name */
5531         sas_device->device_name = le64_to_cpu(sas_device_pg0.DeviceName);
5532
5533         if (ioc->wait_for_discovery_to_complete)
5534                 _scsih_sas_device_init_add(ioc, sas_device);
5535         else
5536                 _scsih_sas_device_add(ioc, sas_device);
5537
5538         sas_device_put(sas_device);
5539         return 0;
5540 }
5541
5542 /**
5543  * _scsih_remove_device -  removing sas device object
5544  * @ioc: per adapter object
5545  * @sas_device_delete: the sas_device object
5546  *
5547  * Return nothing.
5548  */
5549 static void
5550 _scsih_remove_device(struct MPT3SAS_ADAPTER *ioc,
5551         struct _sas_device *sas_device)
5552 {
5553         struct MPT3SAS_TARGET *sas_target_priv_data;
5554
5555         if ((ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_IBM) &&
5556              (sas_device->pfa_led_on)) {
5557                 _scsih_turn_off_pfa_led(ioc, sas_device);
5558                 sas_device->pfa_led_on = 0;
5559         }
5560         dewtprintk(ioc, pr_info(MPT3SAS_FMT
5561                 "%s: enter: handle(0x%04x), sas_addr(0x%016llx)\n",
5562                 ioc->name, __func__,
5563             sas_device->handle, (unsigned long long)
5564             sas_device->sas_address));
5565         if (sas_device->enclosure_handle != 0)
5566                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
5567                     "%s: enter: enclosure logical id(0x%016llx), slot(%d)\n",
5568                     ioc->name, __func__,
5569                     (unsigned long long)sas_device->enclosure_logical_id,
5570                     sas_device->slot));
5571         if (sas_device->connector_name[0] != '\0')
5572                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
5573                   "%s: enter: enclosure level(0x%04x), connector name( %s)\n",
5574                   ioc->name, __func__,
5575                   sas_device->enclosure_level,
5576                   sas_device->connector_name));
5577
5578         if (sas_device->starget && sas_device->starget->hostdata) {
5579                 sas_target_priv_data = sas_device->starget->hostdata;
5580                 sas_target_priv_data->deleted = 1;
5581                 _scsih_ublock_io_device(ioc, sas_device->sas_address);
5582                 sas_target_priv_data->handle =
5583                      MPT3SAS_INVALID_DEVICE_HANDLE;
5584         }
5585
5586         if (!ioc->hide_drives)
5587                 mpt3sas_transport_port_remove(ioc,
5588                     sas_device->sas_address,
5589                     sas_device->sas_address_parent);
5590
5591         pr_info(MPT3SAS_FMT
5592                 "removing handle(0x%04x), sas_addr(0x%016llx)\n",
5593                 ioc->name, sas_device->handle,
5594             (unsigned long long) sas_device->sas_address);
5595         if (sas_device->enclosure_handle != 0)
5596                 pr_info(MPT3SAS_FMT
5597                   "removing : enclosure logical id(0x%016llx), slot(%d)\n",
5598                   ioc->name,
5599                   (unsigned long long)sas_device->enclosure_logical_id,
5600                   sas_device->slot);
5601         if (sas_device->connector_name[0] != '\0')
5602                 pr_info(MPT3SAS_FMT
5603                   "removing enclosure level(0x%04x), connector name( %s)\n",
5604                   ioc->name, sas_device->enclosure_level,
5605                   sas_device->connector_name);
5606
5607         dewtprintk(ioc, pr_info(MPT3SAS_FMT
5608                 "%s: exit: handle(0x%04x), sas_addr(0x%016llx)\n",
5609                 ioc->name, __func__,
5610                 sas_device->handle, (unsigned long long)
5611                 sas_device->sas_address));
5612         if (sas_device->enclosure_handle != 0)
5613                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
5614                     "%s: exit: enclosure logical id(0x%016llx), slot(%d)\n",
5615                     ioc->name, __func__,
5616                     (unsigned long long)sas_device->enclosure_logical_id,
5617                     sas_device->slot));
5618         if (sas_device->connector_name[0] != '\0')
5619                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
5620                     "%s: exit: enclosure level(0x%04x), connector name(%s)\n",
5621                     ioc->name, __func__, sas_device->enclosure_level,
5622                     sas_device->connector_name));
5623 }
5624
5625 /**
5626  * _scsih_sas_topology_change_event_debug - debug for topology event
5627  * @ioc: per adapter object
5628  * @event_data: event data payload
5629  * Context: user.
5630  */
5631 static void
5632 _scsih_sas_topology_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
5633         Mpi2EventDataSasTopologyChangeList_t *event_data)
5634 {
5635         int i;
5636         u16 handle;
5637         u16 reason_code;
5638         u8 phy_number;
5639         char *status_str = NULL;
5640         u8 link_rate, prev_link_rate;
5641
5642         switch (event_data->ExpStatus) {
5643         case MPI2_EVENT_SAS_TOPO_ES_ADDED:
5644                 status_str = "add";
5645                 break;
5646         case MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING:
5647                 status_str = "remove";
5648                 break;
5649         case MPI2_EVENT_SAS_TOPO_ES_RESPONDING:
5650         case 0:
5651                 status_str =  "responding";
5652                 break;
5653         case MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING:
5654                 status_str = "remove delay";
5655                 break;
5656         default:
5657                 status_str = "unknown status";
5658                 break;
5659         }
5660         pr_info(MPT3SAS_FMT "sas topology change: (%s)\n",
5661             ioc->name, status_str);
5662         pr_info("\thandle(0x%04x), enclosure_handle(0x%04x) " \
5663             "start_phy(%02d), count(%d)\n",
5664             le16_to_cpu(event_data->ExpanderDevHandle),
5665             le16_to_cpu(event_data->EnclosureHandle),
5666             event_data->StartPhyNum, event_data->NumEntries);
5667         for (i = 0; i < event_data->NumEntries; i++) {
5668                 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
5669                 if (!handle)
5670                         continue;
5671                 phy_number = event_data->StartPhyNum + i;
5672                 reason_code = event_data->PHY[i].PhyStatus &
5673                     MPI2_EVENT_SAS_TOPO_RC_MASK;
5674                 switch (reason_code) {
5675                 case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
5676                         status_str = "target add";
5677                         break;
5678                 case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
5679                         status_str = "target remove";
5680                         break;
5681                 case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
5682                         status_str = "delay target remove";
5683                         break;
5684                 case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
5685                         status_str = "link rate change";
5686                         break;
5687                 case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
5688                         status_str = "target responding";
5689                         break;
5690                 default:
5691                         status_str = "unknown";
5692                         break;
5693                 }
5694                 link_rate = event_data->PHY[i].LinkRate >> 4;
5695                 prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
5696                 pr_info("\tphy(%02d), attached_handle(0x%04x): %s:" \
5697                     " link rate: new(0x%02x), old(0x%02x)\n", phy_number,
5698                     handle, status_str, link_rate, prev_link_rate);
5699
5700         }
5701 }
5702
5703 /**
5704  * _scsih_sas_topology_change_event - handle topology changes
5705  * @ioc: per adapter object
5706  * @fw_event: The fw_event_work object
5707  * Context: user.
5708  *
5709  */
5710 static int
5711 _scsih_sas_topology_change_event(struct MPT3SAS_ADAPTER *ioc,
5712         struct fw_event_work *fw_event)
5713 {
5714         int i;
5715         u16 parent_handle, handle;
5716         u16 reason_code;
5717         u8 phy_number, max_phys;
5718         struct _sas_node *sas_expander;
5719         u64 sas_address;
5720         unsigned long flags;
5721         u8 link_rate, prev_link_rate;
5722         Mpi2EventDataSasTopologyChangeList_t *event_data =
5723                 (Mpi2EventDataSasTopologyChangeList_t *)
5724                 fw_event->event_data;
5725
5726         if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
5727                 _scsih_sas_topology_change_event_debug(ioc, event_data);
5728
5729         if (ioc->shost_recovery || ioc->remove_host || ioc->pci_error_recovery)
5730                 return 0;
5731
5732         if (!ioc->sas_hba.num_phys)
5733                 _scsih_sas_host_add(ioc);
5734         else
5735                 _scsih_sas_host_refresh(ioc);
5736
5737         if (fw_event->ignore) {
5738                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
5739                         "ignoring expander event\n", ioc->name));
5740                 return 0;
5741         }
5742
5743         parent_handle = le16_to_cpu(event_data->ExpanderDevHandle);
5744
5745         /* handle expander add */
5746         if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_ADDED)
5747                 if (_scsih_expander_add(ioc, parent_handle) != 0)
5748                         return 0;
5749
5750         spin_lock_irqsave(&ioc->sas_node_lock, flags);
5751         sas_expander = mpt3sas_scsih_expander_find_by_handle(ioc,
5752             parent_handle);
5753         if (sas_expander) {
5754                 sas_address = sas_expander->sas_address;
5755                 max_phys = sas_expander->num_phys;
5756         } else if (parent_handle < ioc->sas_hba.num_phys) {
5757                 sas_address = ioc->sas_hba.sas_address;
5758                 max_phys = ioc->sas_hba.num_phys;
5759         } else {
5760                 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
5761                 return 0;
5762         }
5763         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
5764
5765         /* handle siblings events */
5766         for (i = 0; i < event_data->NumEntries; i++) {
5767                 if (fw_event->ignore) {
5768                         dewtprintk(ioc, pr_info(MPT3SAS_FMT
5769                                 "ignoring expander event\n", ioc->name));
5770                         return 0;
5771                 }
5772                 if (ioc->remove_host || ioc->pci_error_recovery)
5773                         return 0;
5774                 phy_number = event_data->StartPhyNum + i;
5775                 if (phy_number >= max_phys)
5776                         continue;
5777                 reason_code = event_data->PHY[i].PhyStatus &
5778                     MPI2_EVENT_SAS_TOPO_RC_MASK;
5779                 if ((event_data->PHY[i].PhyStatus &
5780                     MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT) && (reason_code !=
5781                     MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
5782                                 continue;
5783                 handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
5784                 if (!handle)
5785                         continue;
5786                 link_rate = event_data->PHY[i].LinkRate >> 4;
5787                 prev_link_rate = event_data->PHY[i].LinkRate & 0xF;
5788                 switch (reason_code) {
5789                 case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
5790
5791                         if (ioc->shost_recovery)
5792                                 break;
5793
5794                         if (link_rate == prev_link_rate)
5795                                 break;
5796
5797                         mpt3sas_transport_update_links(ioc, sas_address,
5798                             handle, phy_number, link_rate);
5799
5800                         if (link_rate < MPI2_SAS_NEG_LINK_RATE_1_5)
5801                                 break;
5802
5803                         _scsih_check_device(ioc, sas_address, handle,
5804                             phy_number, link_rate);
5805
5806
5807                 case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
5808
5809                         if (ioc->shost_recovery)
5810                                 break;
5811
5812                         mpt3sas_transport_update_links(ioc, sas_address,
5813                             handle, phy_number, link_rate);
5814
5815                         _scsih_add_device(ioc, handle, phy_number, 0);
5816
5817                         break;
5818                 case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
5819
5820                         _scsih_device_remove_by_handle(ioc, handle);
5821                         break;
5822                 }
5823         }
5824
5825         /* handle expander removal */
5826         if (event_data->ExpStatus == MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING &&
5827             sas_expander)
5828                 mpt3sas_expander_remove(ioc, sas_address);
5829
5830         return 0;
5831 }
5832
5833 /**
5834  * _scsih_sas_device_status_change_event_debug - debug for device event
5835  * @event_data: event data payload
5836  * Context: user.
5837  *
5838  * Return nothing.
5839  */
5840 static void
5841 _scsih_sas_device_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
5842         Mpi2EventDataSasDeviceStatusChange_t *event_data)
5843 {
5844         char *reason_str = NULL;
5845
5846         switch (event_data->ReasonCode) {
5847         case MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA:
5848                 reason_str = "smart data";
5849                 break;
5850         case MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED:
5851                 reason_str = "unsupported device discovered";
5852                 break;
5853         case MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET:
5854                 reason_str = "internal device reset";
5855                 break;
5856         case MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL:
5857                 reason_str = "internal task abort";
5858                 break;
5859         case MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL:
5860                 reason_str = "internal task abort set";
5861                 break;
5862         case MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL:
5863                 reason_str = "internal clear task set";
5864                 break;
5865         case MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL:
5866                 reason_str = "internal query task";
5867                 break;
5868         case MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE:
5869                 reason_str = "sata init failure";
5870                 break;
5871         case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET:
5872                 reason_str = "internal device reset complete";
5873                 break;
5874         case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL:
5875                 reason_str = "internal task abort complete";
5876                 break;
5877         case MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION:
5878                 reason_str = "internal async notification";
5879                 break;
5880         case MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY:
5881                 reason_str = "expander reduced functionality";
5882                 break;
5883         case MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY:
5884                 reason_str = "expander reduced functionality complete";
5885                 break;
5886         default:
5887                 reason_str = "unknown reason";
5888                 break;
5889         }
5890         pr_info(MPT3SAS_FMT "device status change: (%s)\n"
5891             "\thandle(0x%04x), sas address(0x%016llx), tag(%d)",
5892             ioc->name, reason_str, le16_to_cpu(event_data->DevHandle),
5893             (unsigned long long)le64_to_cpu(event_data->SASAddress),
5894             le16_to_cpu(event_data->TaskTag));
5895         if (event_data->ReasonCode == MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA)
5896                 pr_info(MPT3SAS_FMT ", ASC(0x%x), ASCQ(0x%x)\n", ioc->name,
5897                     event_data->ASC, event_data->ASCQ);
5898         pr_info("\n");
5899 }
5900
5901 /**
5902  * _scsih_sas_device_status_change_event - handle device status change
5903  * @ioc: per adapter object
5904  * @fw_event: The fw_event_work object
5905  * Context: user.
5906  *
5907  * Return nothing.
5908  */
5909 static void
5910 _scsih_sas_device_status_change_event(struct MPT3SAS_ADAPTER *ioc,
5911         struct fw_event_work *fw_event)
5912 {
5913         struct MPT3SAS_TARGET *target_priv_data;
5914         struct _sas_device *sas_device;
5915         u64 sas_address;
5916         unsigned long flags;
5917         Mpi2EventDataSasDeviceStatusChange_t *event_data =
5918                 (Mpi2EventDataSasDeviceStatusChange_t *)
5919                 fw_event->event_data;
5920
5921         if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
5922                 _scsih_sas_device_status_change_event_debug(ioc,
5923                      event_data);
5924
5925         /* In MPI Revision K (0xC), the internal device reset complete was
5926          * implemented, so avoid setting tm_busy flag for older firmware.
5927          */
5928         if ((ioc->facts.HeaderVersion >> 8) < 0xC)
5929                 return;
5930
5931         if (event_data->ReasonCode !=
5932             MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET &&
5933            event_data->ReasonCode !=
5934             MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET)
5935                 return;
5936
5937         spin_lock_irqsave(&ioc->sas_device_lock, flags);
5938         sas_address = le64_to_cpu(event_data->SASAddress);
5939         sas_device = __mpt3sas_get_sdev_by_addr(ioc,
5940             sas_address);
5941
5942         if (!sas_device || !sas_device->starget)
5943                 goto out;
5944
5945         target_priv_data = sas_device->starget->hostdata;
5946         if (!target_priv_data)
5947                 goto out;
5948
5949         if (event_data->ReasonCode ==
5950             MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET)
5951                 target_priv_data->tm_busy = 1;
5952         else
5953                 target_priv_data->tm_busy = 0;
5954
5955 out:
5956         if (sas_device)
5957                 sas_device_put(sas_device);
5958
5959         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
5960
5961 }
5962
5963 /**
5964  * _scsih_sas_enclosure_dev_status_change_event_debug - debug for enclosure
5965  * event
5966  * @ioc: per adapter object
5967  * @event_data: event data payload
5968  * Context: user.
5969  *
5970  * Return nothing.
5971  */
5972 static void
5973 _scsih_sas_enclosure_dev_status_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
5974         Mpi2EventDataSasEnclDevStatusChange_t *event_data)
5975 {
5976         char *reason_str = NULL;
5977
5978         switch (event_data->ReasonCode) {
5979         case MPI2_EVENT_SAS_ENCL_RC_ADDED:
5980                 reason_str = "enclosure add";
5981                 break;
5982         case MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING:
5983                 reason_str = "enclosure remove";
5984                 break;
5985         default:
5986                 reason_str = "unknown reason";
5987                 break;
5988         }
5989
5990         pr_info(MPT3SAS_FMT "enclosure status change: (%s)\n"
5991             "\thandle(0x%04x), enclosure logical id(0x%016llx)"
5992             " number slots(%d)\n", ioc->name, reason_str,
5993             le16_to_cpu(event_data->EnclosureHandle),
5994             (unsigned long long)le64_to_cpu(event_data->EnclosureLogicalID),
5995             le16_to_cpu(event_data->StartSlot));
5996 }
5997
5998 /**
5999  * _scsih_sas_enclosure_dev_status_change_event - handle enclosure events
6000  * @ioc: per adapter object
6001  * @fw_event: The fw_event_work object
6002  * Context: user.
6003  *
6004  * Return nothing.
6005  */
6006 static void
6007 _scsih_sas_enclosure_dev_status_change_event(struct MPT3SAS_ADAPTER *ioc,
6008         struct fw_event_work *fw_event)
6009 {
6010         if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK)
6011                 _scsih_sas_enclosure_dev_status_change_event_debug(ioc,
6012                      (Mpi2EventDataSasEnclDevStatusChange_t *)
6013                      fw_event->event_data);
6014 }
6015
6016 /**
6017  * _scsih_sas_broadcast_primitive_event - handle broadcast events
6018  * @ioc: per adapter object
6019  * @fw_event: The fw_event_work object
6020  * Context: user.
6021  *
6022  * Return nothing.
6023  */
6024 static void
6025 _scsih_sas_broadcast_primitive_event(struct MPT3SAS_ADAPTER *ioc,
6026         struct fw_event_work *fw_event)
6027 {
6028         struct scsi_cmnd *scmd;
6029         struct scsi_device *sdev;
6030         u16 smid, handle;
6031         u32 lun;
6032         struct MPT3SAS_DEVICE *sas_device_priv_data;
6033         u32 termination_count;
6034         u32 query_count;
6035         Mpi2SCSITaskManagementReply_t *mpi_reply;
6036         Mpi2EventDataSasBroadcastPrimitive_t *event_data =
6037                 (Mpi2EventDataSasBroadcastPrimitive_t *)
6038                 fw_event->event_data;
6039         u16 ioc_status;
6040         unsigned long flags;
6041         int r;
6042         u8 max_retries = 0;
6043         u8 task_abort_retries;
6044
6045         mutex_lock(&ioc->tm_cmds.mutex);
6046         pr_info(MPT3SAS_FMT
6047                 "%s: enter: phy number(%d), width(%d)\n",
6048                 ioc->name, __func__, event_data->PhyNum,
6049              event_data->PortWidth);
6050
6051         _scsih_block_io_all_device(ioc);
6052
6053         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
6054         mpi_reply = ioc->tm_cmds.reply;
6055  broadcast_aen_retry:
6056
6057         /* sanity checks for retrying this loop */
6058         if (max_retries++ == 5) {
6059                 dewtprintk(ioc, pr_info(MPT3SAS_FMT "%s: giving up\n",
6060                     ioc->name, __func__));
6061                 goto out;
6062         } else if (max_retries > 1)
6063                 dewtprintk(ioc, pr_info(MPT3SAS_FMT "%s: %d retry\n",
6064                     ioc->name, __func__, max_retries - 1));
6065
6066         termination_count = 0;
6067         query_count = 0;
6068         for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
6069                 if (ioc->shost_recovery)
6070                         goto out;
6071                 scmd = _scsih_scsi_lookup_get(ioc, smid);
6072                 if (!scmd)
6073                         continue;
6074                 sdev = scmd->device;
6075                 sas_device_priv_data = sdev->hostdata;
6076                 if (!sas_device_priv_data || !sas_device_priv_data->sas_target)
6077                         continue;
6078                  /* skip hidden raid components */
6079                 if (sas_device_priv_data->sas_target->flags &
6080                     MPT_TARGET_FLAGS_RAID_COMPONENT)
6081                         continue;
6082                  /* skip volumes */
6083                 if (sas_device_priv_data->sas_target->flags &
6084                     MPT_TARGET_FLAGS_VOLUME)
6085                         continue;
6086
6087                 handle = sas_device_priv_data->sas_target->handle;
6088                 lun = sas_device_priv_data->lun;
6089                 query_count++;
6090
6091                 if (ioc->shost_recovery)
6092                         goto out;
6093
6094                 spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
6095                 r = mpt3sas_scsih_issue_tm(ioc, handle, 0, 0, lun,
6096                     MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30);
6097                 if (r == FAILED) {
6098                         sdev_printk(KERN_WARNING, sdev,
6099                             "mpt3sas_scsih_issue_tm: FAILED when sending "
6100                             "QUERY_TASK: scmd(%p)\n", scmd);
6101                         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
6102                         goto broadcast_aen_retry;
6103                 }
6104                 ioc_status = le16_to_cpu(mpi_reply->IOCStatus)
6105                     & MPI2_IOCSTATUS_MASK;
6106                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
6107                         sdev_printk(KERN_WARNING, sdev,
6108                                 "query task: FAILED with IOCSTATUS(0x%04x), scmd(%p)\n",
6109                                 ioc_status, scmd);
6110                         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
6111                         goto broadcast_aen_retry;
6112                 }
6113
6114                 /* see if IO is still owned by IOC and target */
6115                 if (mpi_reply->ResponseCode ==
6116                      MPI2_SCSITASKMGMT_RSP_TM_SUCCEEDED ||
6117                      mpi_reply->ResponseCode ==
6118                      MPI2_SCSITASKMGMT_RSP_IO_QUEUED_ON_IOC) {
6119                         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
6120                         continue;
6121                 }
6122                 task_abort_retries = 0;
6123  tm_retry:
6124                 if (task_abort_retries++ == 60) {
6125                         dewtprintk(ioc, pr_info(MPT3SAS_FMT
6126                             "%s: ABORT_TASK: giving up\n", ioc->name,
6127                             __func__));
6128                         spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
6129                         goto broadcast_aen_retry;
6130                 }
6131
6132                 if (ioc->shost_recovery)
6133                         goto out_no_lock;
6134
6135                 r = mpt3sas_scsih_issue_tm(ioc, handle, sdev->channel, sdev->id,
6136                     sdev->lun, MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK, smid,
6137                     30);
6138                 if (r == FAILED) {
6139                         sdev_printk(KERN_WARNING, sdev,
6140                             "mpt3sas_scsih_issue_tm: ABORT_TASK: FAILED : "
6141                             "scmd(%p)\n", scmd);
6142                         goto tm_retry;
6143                 }
6144
6145                 if (task_abort_retries > 1)
6146                         sdev_printk(KERN_WARNING, sdev,
6147                             "mpt3sas_scsih_issue_tm: ABORT_TASK: RETRIES (%d):"
6148                             " scmd(%p)\n",
6149                             task_abort_retries - 1, scmd);
6150
6151                 termination_count += le32_to_cpu(mpi_reply->TerminationCount);
6152                 spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
6153         }
6154
6155         if (ioc->broadcast_aen_pending) {
6156                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
6157                         "%s: loop back due to pending AEN\n",
6158                         ioc->name, __func__));
6159                  ioc->broadcast_aen_pending = 0;
6160                  goto broadcast_aen_retry;
6161         }
6162
6163  out:
6164         spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
6165  out_no_lock:
6166
6167         dewtprintk(ioc, pr_info(MPT3SAS_FMT
6168             "%s - exit, query_count = %d termination_count = %d\n",
6169             ioc->name, __func__, query_count, termination_count));
6170
6171         ioc->broadcast_aen_busy = 0;
6172         if (!ioc->shost_recovery)
6173                 _scsih_ublock_io_all_device(ioc);
6174         mutex_unlock(&ioc->tm_cmds.mutex);
6175 }
6176
6177 /**
6178  * _scsih_sas_discovery_event - handle discovery events
6179  * @ioc: per adapter object
6180  * @fw_event: The fw_event_work object
6181  * Context: user.
6182  *
6183  * Return nothing.
6184  */
6185 static void
6186 _scsih_sas_discovery_event(struct MPT3SAS_ADAPTER *ioc,
6187         struct fw_event_work *fw_event)
6188 {
6189         Mpi2EventDataSasDiscovery_t *event_data =
6190                 (Mpi2EventDataSasDiscovery_t *) fw_event->event_data;
6191
6192         if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) {
6193                 pr_info(MPT3SAS_FMT "discovery event: (%s)", ioc->name,
6194                     (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED) ?
6195                     "start" : "stop");
6196                 if (event_data->DiscoveryStatus)
6197                         pr_info("discovery_status(0x%08x)",
6198                             le32_to_cpu(event_data->DiscoveryStatus));
6199                 pr_info("\n");
6200         }
6201
6202         if (event_data->ReasonCode == MPI2_EVENT_SAS_DISC_RC_STARTED &&
6203             !ioc->sas_hba.num_phys) {
6204                 if (disable_discovery > 0 && ioc->shost_recovery) {
6205                         /* Wait for the reset to complete */
6206                         while (ioc->shost_recovery)
6207                                 ssleep(1);
6208                 }
6209                 _scsih_sas_host_add(ioc);
6210         }
6211 }
6212
6213 /**
6214  * _scsih_ir_fastpath - turn on fastpath for IR physdisk
6215  * @ioc: per adapter object
6216  * @handle: device handle for physical disk
6217  * @phys_disk_num: physical disk number
6218  *
6219  * Return 0 for success, else failure.
6220  */
6221 static int
6222 _scsih_ir_fastpath(struct MPT3SAS_ADAPTER *ioc, u16 handle, u8 phys_disk_num)
6223 {
6224         Mpi2RaidActionRequest_t *mpi_request;
6225         Mpi2RaidActionReply_t *mpi_reply;
6226         u16 smid;
6227         u8 issue_reset = 0;
6228         int rc = 0;
6229         u16 ioc_status;
6230         u32 log_info;
6231
6232         if (ioc->hba_mpi_version_belonged == MPI2_VERSION)
6233                 return rc;
6234
6235         mutex_lock(&ioc->scsih_cmds.mutex);
6236
6237         if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
6238                 pr_err(MPT3SAS_FMT "%s: scsih_cmd in use\n",
6239                     ioc->name, __func__);
6240                 rc = -EAGAIN;
6241                 goto out;
6242         }
6243         ioc->scsih_cmds.status = MPT3_CMD_PENDING;
6244
6245         smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
6246         if (!smid) {
6247                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
6248                     ioc->name, __func__);
6249                 ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
6250                 rc = -EAGAIN;
6251                 goto out;
6252         }
6253
6254         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
6255         ioc->scsih_cmds.smid = smid;
6256         memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
6257
6258         mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
6259         mpi_request->Action = MPI2_RAID_ACTION_PHYSDISK_HIDDEN;
6260         mpi_request->PhysDiskNum = phys_disk_num;
6261
6262         dewtprintk(ioc, pr_info(MPT3SAS_FMT "IR RAID_ACTION: turning fast "\
6263             "path on for handle(0x%04x), phys_disk_num (0x%02x)\n", ioc->name,
6264             handle, phys_disk_num));
6265
6266         init_completion(&ioc->scsih_cmds.done);
6267         mpt3sas_base_put_smid_default(ioc, smid);
6268         wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
6269
6270         if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
6271                 pr_err(MPT3SAS_FMT "%s: timeout\n",
6272                     ioc->name, __func__);
6273                 if (!(ioc->scsih_cmds.status & MPT3_CMD_RESET))
6274                         issue_reset = 1;
6275                 rc = -EFAULT;
6276                 goto out;
6277         }
6278
6279         if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
6280
6281                 mpi_reply = ioc->scsih_cmds.reply;
6282                 ioc_status = le16_to_cpu(mpi_reply->IOCStatus);
6283                 if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
6284                         log_info =  le32_to_cpu(mpi_reply->IOCLogInfo);
6285                 else
6286                         log_info = 0;
6287                 ioc_status &= MPI2_IOCSTATUS_MASK;
6288                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
6289                         dewtprintk(ioc, pr_info(MPT3SAS_FMT
6290                             "IR RAID_ACTION: failed: ioc_status(0x%04x), "
6291                             "loginfo(0x%08x)!!!\n", ioc->name, ioc_status,
6292                             log_info));
6293                         rc = -EFAULT;
6294                 } else
6295                         dewtprintk(ioc, pr_info(MPT3SAS_FMT
6296                             "IR RAID_ACTION: completed successfully\n",
6297                             ioc->name));
6298         }
6299
6300  out:
6301         ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
6302         mutex_unlock(&ioc->scsih_cmds.mutex);
6303
6304         if (issue_reset)
6305                 mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
6306         return rc;
6307 }
6308
6309 /**
6310  * _scsih_reprobe_lun - reprobing lun
6311  * @sdev: scsi device struct
6312  * @no_uld_attach: sdev->no_uld_attach flag setting
6313  *
6314  **/
6315 static void
6316 _scsih_reprobe_lun(struct scsi_device *sdev, void *no_uld_attach)
6317 {
6318         sdev->no_uld_attach = no_uld_attach ? 1 : 0;
6319         sdev_printk(KERN_INFO, sdev, "%s raid component\n",
6320             sdev->no_uld_attach ? "hidding" : "exposing");
6321         WARN_ON(scsi_device_reprobe(sdev));
6322 }
6323
6324 /**
6325  * _scsih_sas_volume_add - add new volume
6326  * @ioc: per adapter object
6327  * @element: IR config element data
6328  * Context: user.
6329  *
6330  * Return nothing.
6331  */
6332 static void
6333 _scsih_sas_volume_add(struct MPT3SAS_ADAPTER *ioc,
6334         Mpi2EventIrConfigElement_t *element)
6335 {
6336         struct _raid_device *raid_device;
6337         unsigned long flags;
6338         u64 wwid;
6339         u16 handle = le16_to_cpu(element->VolDevHandle);
6340         int rc;
6341
6342         mpt3sas_config_get_volume_wwid(ioc, handle, &wwid);
6343         if (!wwid) {
6344                 pr_err(MPT3SAS_FMT
6345                     "failure at %s:%d/%s()!\n", ioc->name,
6346                     __FILE__, __LINE__, __func__);
6347                 return;
6348         }
6349
6350         spin_lock_irqsave(&ioc->raid_device_lock, flags);
6351         raid_device = _scsih_raid_device_find_by_wwid(ioc, wwid);
6352         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6353
6354         if (raid_device)
6355                 return;
6356
6357         raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
6358         if (!raid_device) {
6359                 pr_err(MPT3SAS_FMT
6360                     "failure at %s:%d/%s()!\n", ioc->name,
6361                     __FILE__, __LINE__, __func__);
6362                 return;
6363         }
6364
6365         raid_device->id = ioc->sas_id++;
6366         raid_device->channel = RAID_CHANNEL;
6367         raid_device->handle = handle;
6368         raid_device->wwid = wwid;
6369         _scsih_raid_device_add(ioc, raid_device);
6370         if (!ioc->wait_for_discovery_to_complete) {
6371                 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
6372                     raid_device->id, 0);
6373                 if (rc)
6374                         _scsih_raid_device_remove(ioc, raid_device);
6375         } else {
6376                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
6377                 _scsih_determine_boot_device(ioc, raid_device, 1);
6378                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6379         }
6380 }
6381
6382 /**
6383  * _scsih_sas_volume_delete - delete volume
6384  * @ioc: per adapter object
6385  * @handle: volume device handle
6386  * Context: user.
6387  *
6388  * Return nothing.
6389  */
6390 static void
6391 _scsih_sas_volume_delete(struct MPT3SAS_ADAPTER *ioc, u16 handle)
6392 {
6393         struct _raid_device *raid_device;
6394         unsigned long flags;
6395         struct MPT3SAS_TARGET *sas_target_priv_data;
6396         struct scsi_target *starget = NULL;
6397
6398         spin_lock_irqsave(&ioc->raid_device_lock, flags);
6399         raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
6400         if (raid_device) {
6401                 if (raid_device->starget) {
6402                         starget = raid_device->starget;
6403                         sas_target_priv_data = starget->hostdata;
6404                         sas_target_priv_data->deleted = 1;
6405                 }
6406                 pr_info(MPT3SAS_FMT "removing handle(0x%04x), wwid(0x%016llx)\n",
6407                         ioc->name,  raid_device->handle,
6408                     (unsigned long long) raid_device->wwid);
6409                 list_del(&raid_device->list);
6410                 kfree(raid_device);
6411         }
6412         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6413         if (starget)
6414                 scsi_remove_target(&starget->dev);
6415 }
6416
6417 /**
6418  * _scsih_sas_pd_expose - expose pd component to /dev/sdX
6419  * @ioc: per adapter object
6420  * @element: IR config element data
6421  * Context: user.
6422  *
6423  * Return nothing.
6424  */
6425 static void
6426 _scsih_sas_pd_expose(struct MPT3SAS_ADAPTER *ioc,
6427         Mpi2EventIrConfigElement_t *element)
6428 {
6429         struct _sas_device *sas_device;
6430         struct scsi_target *starget = NULL;
6431         struct MPT3SAS_TARGET *sas_target_priv_data;
6432         unsigned long flags;
6433         u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
6434
6435         spin_lock_irqsave(&ioc->sas_device_lock, flags);
6436         sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
6437         if (sas_device) {
6438                 sas_device->volume_handle = 0;
6439                 sas_device->volume_wwid = 0;
6440                 clear_bit(handle, ioc->pd_handles);
6441                 if (sas_device->starget && sas_device->starget->hostdata) {
6442                         starget = sas_device->starget;
6443                         sas_target_priv_data = starget->hostdata;
6444                         sas_target_priv_data->flags &=
6445                             ~MPT_TARGET_FLAGS_RAID_COMPONENT;
6446                 }
6447         }
6448         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
6449         if (!sas_device)
6450                 return;
6451
6452         /* exposing raid component */
6453         if (starget)
6454                 starget_for_each_device(starget, NULL, _scsih_reprobe_lun);
6455
6456         sas_device_put(sas_device);
6457 }
6458
6459 /**
6460  * _scsih_sas_pd_hide - hide pd component from /dev/sdX
6461  * @ioc: per adapter object
6462  * @element: IR config element data
6463  * Context: user.
6464  *
6465  * Return nothing.
6466  */
6467 static void
6468 _scsih_sas_pd_hide(struct MPT3SAS_ADAPTER *ioc,
6469         Mpi2EventIrConfigElement_t *element)
6470 {
6471         struct _sas_device *sas_device;
6472         struct scsi_target *starget = NULL;
6473         struct MPT3SAS_TARGET *sas_target_priv_data;
6474         unsigned long flags;
6475         u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
6476         u16 volume_handle = 0;
6477         u64 volume_wwid = 0;
6478
6479         mpt3sas_config_get_volume_handle(ioc, handle, &volume_handle);
6480         if (volume_handle)
6481                 mpt3sas_config_get_volume_wwid(ioc, volume_handle,
6482                     &volume_wwid);
6483
6484         spin_lock_irqsave(&ioc->sas_device_lock, flags);
6485         sas_device = __mpt3sas_get_sdev_by_handle(ioc, handle);
6486         if (sas_device) {
6487                 set_bit(handle, ioc->pd_handles);
6488                 if (sas_device->starget && sas_device->starget->hostdata) {
6489                         starget = sas_device->starget;
6490                         sas_target_priv_data = starget->hostdata;
6491                         sas_target_priv_data->flags |=
6492                             MPT_TARGET_FLAGS_RAID_COMPONENT;
6493                         sas_device->volume_handle = volume_handle;
6494                         sas_device->volume_wwid = volume_wwid;
6495                 }
6496         }
6497         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
6498         if (!sas_device)
6499                 return;
6500
6501         /* hiding raid component */
6502         _scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
6503
6504         if (starget)
6505                 starget_for_each_device(starget, (void *)1, _scsih_reprobe_lun);
6506
6507         sas_device_put(sas_device);
6508 }
6509
6510 /**
6511  * _scsih_sas_pd_delete - delete pd component
6512  * @ioc: per adapter object
6513  * @element: IR config element data
6514  * Context: user.
6515  *
6516  * Return nothing.
6517  */
6518 static void
6519 _scsih_sas_pd_delete(struct MPT3SAS_ADAPTER *ioc,
6520         Mpi2EventIrConfigElement_t *element)
6521 {
6522         u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
6523
6524         _scsih_device_remove_by_handle(ioc, handle);
6525 }
6526
6527 /**
6528  * _scsih_sas_pd_add - remove pd component
6529  * @ioc: per adapter object
6530  * @element: IR config element data
6531  * Context: user.
6532  *
6533  * Return nothing.
6534  */
6535 static void
6536 _scsih_sas_pd_add(struct MPT3SAS_ADAPTER *ioc,
6537         Mpi2EventIrConfigElement_t *element)
6538 {
6539         struct _sas_device *sas_device;
6540         u16 handle = le16_to_cpu(element->PhysDiskDevHandle);
6541         Mpi2ConfigReply_t mpi_reply;
6542         Mpi2SasDevicePage0_t sas_device_pg0;
6543         u32 ioc_status;
6544         u64 sas_address;
6545         u16 parent_handle;
6546
6547         set_bit(handle, ioc->pd_handles);
6548
6549         sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
6550         if (sas_device) {
6551                 _scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
6552                 sas_device_put(sas_device);
6553                 return;
6554         }
6555
6556         if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply, &sas_device_pg0,
6557             MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
6558                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
6559                     ioc->name, __FILE__, __LINE__, __func__);
6560                 return;
6561         }
6562
6563         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
6564             MPI2_IOCSTATUS_MASK;
6565         if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
6566                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
6567                     ioc->name, __FILE__, __LINE__, __func__);
6568                 return;
6569         }
6570
6571         parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
6572         if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
6573                 mpt3sas_transport_update_links(ioc, sas_address, handle,
6574                     sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
6575
6576         _scsih_ir_fastpath(ioc, handle, element->PhysDiskNum);
6577         _scsih_add_device(ioc, handle, 0, 1);
6578 }
6579
6580 /**
6581  * _scsih_sas_ir_config_change_event_debug - debug for IR Config Change events
6582  * @ioc: per adapter object
6583  * @event_data: event data payload
6584  * Context: user.
6585  *
6586  * Return nothing.
6587  */
6588 static void
6589 _scsih_sas_ir_config_change_event_debug(struct MPT3SAS_ADAPTER *ioc,
6590         Mpi2EventDataIrConfigChangeList_t *event_data)
6591 {
6592         Mpi2EventIrConfigElement_t *element;
6593         u8 element_type;
6594         int i;
6595         char *reason_str = NULL, *element_str = NULL;
6596
6597         element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
6598
6599         pr_info(MPT3SAS_FMT "raid config change: (%s), elements(%d)\n",
6600             ioc->name, (le32_to_cpu(event_data->Flags) &
6601             MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ?
6602             "foreign" : "native", event_data->NumElements);
6603         for (i = 0; i < event_data->NumElements; i++, element++) {
6604                 switch (element->ReasonCode) {
6605                 case MPI2_EVENT_IR_CHANGE_RC_ADDED:
6606                         reason_str = "add";
6607                         break;
6608                 case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
6609                         reason_str = "remove";
6610                         break;
6611                 case MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE:
6612                         reason_str = "no change";
6613                         break;
6614                 case MPI2_EVENT_IR_CHANGE_RC_HIDE:
6615                         reason_str = "hide";
6616                         break;
6617                 case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
6618                         reason_str = "unhide";
6619                         break;
6620                 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
6621                         reason_str = "volume_created";
6622                         break;
6623                 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
6624                         reason_str = "volume_deleted";
6625                         break;
6626                 case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
6627                         reason_str = "pd_created";
6628                         break;
6629                 case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
6630                         reason_str = "pd_deleted";
6631                         break;
6632                 default:
6633                         reason_str = "unknown reason";
6634                         break;
6635                 }
6636                 element_type = le16_to_cpu(element->ElementFlags) &
6637                     MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK;
6638                 switch (element_type) {
6639                 case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT:
6640                         element_str = "volume";
6641                         break;
6642                 case MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT:
6643                         element_str = "phys disk";
6644                         break;
6645                 case MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT:
6646                         element_str = "hot spare";
6647                         break;
6648                 default:
6649                         element_str = "unknown element";
6650                         break;
6651                 }
6652                 pr_info("\t(%s:%s), vol handle(0x%04x), " \
6653                     "pd handle(0x%04x), pd num(0x%02x)\n", element_str,
6654                     reason_str, le16_to_cpu(element->VolDevHandle),
6655                     le16_to_cpu(element->PhysDiskDevHandle),
6656                     element->PhysDiskNum);
6657         }
6658 }
6659
6660 /**
6661  * _scsih_sas_ir_config_change_event - handle ir configuration change events
6662  * @ioc: per adapter object
6663  * @fw_event: The fw_event_work object
6664  * Context: user.
6665  *
6666  * Return nothing.
6667  */
6668 static void
6669 _scsih_sas_ir_config_change_event(struct MPT3SAS_ADAPTER *ioc,
6670         struct fw_event_work *fw_event)
6671 {
6672         Mpi2EventIrConfigElement_t *element;
6673         int i;
6674         u8 foreign_config;
6675         Mpi2EventDataIrConfigChangeList_t *event_data =
6676                 (Mpi2EventDataIrConfigChangeList_t *)
6677                 fw_event->event_data;
6678
6679         if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
6680              (!ioc->hide_ir_msg))
6681                 _scsih_sas_ir_config_change_event_debug(ioc, event_data);
6682
6683         foreign_config = (le32_to_cpu(event_data->Flags) &
6684             MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
6685
6686         element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
6687         if (ioc->shost_recovery &&
6688             ioc->hba_mpi_version_belonged != MPI2_VERSION) {
6689                 for (i = 0; i < event_data->NumElements; i++, element++) {
6690                         if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_HIDE)
6691                                 _scsih_ir_fastpath(ioc,
6692                                         le16_to_cpu(element->PhysDiskDevHandle),
6693                                         element->PhysDiskNum);
6694                 }
6695                 return;
6696         }
6697
6698         for (i = 0; i < event_data->NumElements; i++, element++) {
6699
6700                 switch (element->ReasonCode) {
6701                 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
6702                 case MPI2_EVENT_IR_CHANGE_RC_ADDED:
6703                         if (!foreign_config)
6704                                 _scsih_sas_volume_add(ioc, element);
6705                         break;
6706                 case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
6707                 case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
6708                         if (!foreign_config)
6709                                 _scsih_sas_volume_delete(ioc,
6710                                     le16_to_cpu(element->VolDevHandle));
6711                         break;
6712                 case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
6713                         if (!ioc->is_warpdrive)
6714                                 _scsih_sas_pd_hide(ioc, element);
6715                         break;
6716                 case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
6717                         if (!ioc->is_warpdrive)
6718                                 _scsih_sas_pd_expose(ioc, element);
6719                         break;
6720                 case MPI2_EVENT_IR_CHANGE_RC_HIDE:
6721                         if (!ioc->is_warpdrive)
6722                                 _scsih_sas_pd_add(ioc, element);
6723                         break;
6724                 case MPI2_EVENT_IR_CHANGE_RC_UNHIDE:
6725                         if (!ioc->is_warpdrive)
6726                                 _scsih_sas_pd_delete(ioc, element);
6727                         break;
6728                 }
6729         }
6730 }
6731
6732 /**
6733  * _scsih_sas_ir_volume_event - IR volume event
6734  * @ioc: per adapter object
6735  * @fw_event: The fw_event_work object
6736  * Context: user.
6737  *
6738  * Return nothing.
6739  */
6740 static void
6741 _scsih_sas_ir_volume_event(struct MPT3SAS_ADAPTER *ioc,
6742         struct fw_event_work *fw_event)
6743 {
6744         u64 wwid;
6745         unsigned long flags;
6746         struct _raid_device *raid_device;
6747         u16 handle;
6748         u32 state;
6749         int rc;
6750         Mpi2EventDataIrVolume_t *event_data =
6751                 (Mpi2EventDataIrVolume_t *) fw_event->event_data;
6752
6753         if (ioc->shost_recovery)
6754                 return;
6755
6756         if (event_data->ReasonCode != MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED)
6757                 return;
6758
6759         handle = le16_to_cpu(event_data->VolDevHandle);
6760         state = le32_to_cpu(event_data->NewValue);
6761         if (!ioc->hide_ir_msg)
6762                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
6763                     "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
6764                     ioc->name, __func__,  handle,
6765                     le32_to_cpu(event_data->PreviousValue), state));
6766         switch (state) {
6767         case MPI2_RAID_VOL_STATE_MISSING:
6768         case MPI2_RAID_VOL_STATE_FAILED:
6769                 _scsih_sas_volume_delete(ioc, handle);
6770                 break;
6771
6772         case MPI2_RAID_VOL_STATE_ONLINE:
6773         case MPI2_RAID_VOL_STATE_DEGRADED:
6774         case MPI2_RAID_VOL_STATE_OPTIMAL:
6775
6776                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
6777                 raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
6778                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6779
6780                 if (raid_device)
6781                         break;
6782
6783                 mpt3sas_config_get_volume_wwid(ioc, handle, &wwid);
6784                 if (!wwid) {
6785                         pr_err(MPT3SAS_FMT
6786                             "failure at %s:%d/%s()!\n", ioc->name,
6787                             __FILE__, __LINE__, __func__);
6788                         break;
6789                 }
6790
6791                 raid_device = kzalloc(sizeof(struct _raid_device), GFP_KERNEL);
6792                 if (!raid_device) {
6793                         pr_err(MPT3SAS_FMT
6794                             "failure at %s:%d/%s()!\n", ioc->name,
6795                             __FILE__, __LINE__, __func__);
6796                         break;
6797                 }
6798
6799                 raid_device->id = ioc->sas_id++;
6800                 raid_device->channel = RAID_CHANNEL;
6801                 raid_device->handle = handle;
6802                 raid_device->wwid = wwid;
6803                 _scsih_raid_device_add(ioc, raid_device);
6804                 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
6805                     raid_device->id, 0);
6806                 if (rc)
6807                         _scsih_raid_device_remove(ioc, raid_device);
6808                 break;
6809
6810         case MPI2_RAID_VOL_STATE_INITIALIZING:
6811         default:
6812                 break;
6813         }
6814 }
6815
6816 /**
6817  * _scsih_sas_ir_physical_disk_event - PD event
6818  * @ioc: per adapter object
6819  * @fw_event: The fw_event_work object
6820  * Context: user.
6821  *
6822  * Return nothing.
6823  */
6824 static void
6825 _scsih_sas_ir_physical_disk_event(struct MPT3SAS_ADAPTER *ioc,
6826         struct fw_event_work *fw_event)
6827 {
6828         u16 handle, parent_handle;
6829         u32 state;
6830         struct _sas_device *sas_device;
6831         Mpi2ConfigReply_t mpi_reply;
6832         Mpi2SasDevicePage0_t sas_device_pg0;
6833         u32 ioc_status;
6834         Mpi2EventDataIrPhysicalDisk_t *event_data =
6835                 (Mpi2EventDataIrPhysicalDisk_t *) fw_event->event_data;
6836         u64 sas_address;
6837
6838         if (ioc->shost_recovery)
6839                 return;
6840
6841         if (event_data->ReasonCode != MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED)
6842                 return;
6843
6844         handle = le16_to_cpu(event_data->PhysDiskDevHandle);
6845         state = le32_to_cpu(event_data->NewValue);
6846
6847         if (!ioc->hide_ir_msg)
6848                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
6849                     "%s: handle(0x%04x), old(0x%08x), new(0x%08x)\n",
6850                     ioc->name, __func__,  handle,
6851                     le32_to_cpu(event_data->PreviousValue), state));
6852
6853         switch (state) {
6854         case MPI2_RAID_PD_STATE_ONLINE:
6855         case MPI2_RAID_PD_STATE_DEGRADED:
6856         case MPI2_RAID_PD_STATE_REBUILDING:
6857         case MPI2_RAID_PD_STATE_OPTIMAL:
6858         case MPI2_RAID_PD_STATE_HOT_SPARE:
6859
6860                 if (!ioc->is_warpdrive)
6861                         set_bit(handle, ioc->pd_handles);
6862
6863                 sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
6864                 if (sas_device) {
6865                         sas_device_put(sas_device);
6866                         return;
6867                 }
6868
6869                 if ((mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
6870                     &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
6871                     handle))) {
6872                         pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
6873                             ioc->name, __FILE__, __LINE__, __func__);
6874                         return;
6875                 }
6876
6877                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
6878                     MPI2_IOCSTATUS_MASK;
6879                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
6880                         pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
6881                             ioc->name, __FILE__, __LINE__, __func__);
6882                         return;
6883                 }
6884
6885                 parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
6886                 if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address))
6887                         mpt3sas_transport_update_links(ioc, sas_address, handle,
6888                             sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
6889
6890                 _scsih_add_device(ioc, handle, 0, 1);
6891
6892                 break;
6893
6894         case MPI2_RAID_PD_STATE_OFFLINE:
6895         case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
6896         case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
6897         default:
6898                 break;
6899         }
6900 }
6901
6902 /**
6903  * _scsih_sas_ir_operation_status_event_debug - debug for IR op event
6904  * @ioc: per adapter object
6905  * @event_data: event data payload
6906  * Context: user.
6907  *
6908  * Return nothing.
6909  */
6910 static void
6911 _scsih_sas_ir_operation_status_event_debug(struct MPT3SAS_ADAPTER *ioc,
6912         Mpi2EventDataIrOperationStatus_t *event_data)
6913 {
6914         char *reason_str = NULL;
6915
6916         switch (event_data->RAIDOperation) {
6917         case MPI2_EVENT_IR_RAIDOP_RESYNC:
6918                 reason_str = "resync";
6919                 break;
6920         case MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION:
6921                 reason_str = "online capacity expansion";
6922                 break;
6923         case MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK:
6924                 reason_str = "consistency check";
6925                 break;
6926         case MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT:
6927                 reason_str = "background init";
6928                 break;
6929         case MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT:
6930                 reason_str = "make data consistent";
6931                 break;
6932         }
6933
6934         if (!reason_str)
6935                 return;
6936
6937         pr_info(MPT3SAS_FMT "raid operational status: (%s)" \
6938             "\thandle(0x%04x), percent complete(%d)\n",
6939             ioc->name, reason_str,
6940             le16_to_cpu(event_data->VolDevHandle),
6941             event_data->PercentComplete);
6942 }
6943
6944 /**
6945  * _scsih_sas_ir_operation_status_event - handle RAID operation events
6946  * @ioc: per adapter object
6947  * @fw_event: The fw_event_work object
6948  * Context: user.
6949  *
6950  * Return nothing.
6951  */
6952 static void
6953 _scsih_sas_ir_operation_status_event(struct MPT3SAS_ADAPTER *ioc,
6954         struct fw_event_work *fw_event)
6955 {
6956         Mpi2EventDataIrOperationStatus_t *event_data =
6957                 (Mpi2EventDataIrOperationStatus_t *)
6958                 fw_event->event_data;
6959         static struct _raid_device *raid_device;
6960         unsigned long flags;
6961         u16 handle;
6962
6963         if ((ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) &&
6964             (!ioc->hide_ir_msg))
6965                 _scsih_sas_ir_operation_status_event_debug(ioc,
6966                      event_data);
6967
6968         /* code added for raid transport support */
6969         if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) {
6970
6971                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
6972                 handle = le16_to_cpu(event_data->VolDevHandle);
6973                 raid_device = mpt3sas_raid_device_find_by_handle(ioc, handle);
6974                 if (raid_device)
6975                         raid_device->percent_complete =
6976                             event_data->PercentComplete;
6977                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
6978         }
6979 }
6980
6981 /**
6982  * _scsih_prep_device_scan - initialize parameters prior to device scan
6983  * @ioc: per adapter object
6984  *
6985  * Set the deleted flag prior to device scan.  If the device is found during
6986  * the scan, then we clear the deleted flag.
6987  */
6988 static void
6989 _scsih_prep_device_scan(struct MPT3SAS_ADAPTER *ioc)
6990 {
6991         struct MPT3SAS_DEVICE *sas_device_priv_data;
6992         struct scsi_device *sdev;
6993
6994         shost_for_each_device(sdev, ioc->shost) {
6995                 sas_device_priv_data = sdev->hostdata;
6996                 if (sas_device_priv_data && sas_device_priv_data->sas_target)
6997                         sas_device_priv_data->sas_target->deleted = 1;
6998         }
6999 }
7000
7001 /**
7002  * _scsih_mark_responding_sas_device - mark a sas_devices as responding
7003  * @ioc: per adapter object
7004  * @sas_device_pg0: SAS Device page 0
7005  *
7006  * After host reset, find out whether devices are still responding.
7007  * Used in _scsih_remove_unresponsive_sas_devices.
7008  *
7009  * Return nothing.
7010  */
7011 static void
7012 _scsih_mark_responding_sas_device(struct MPT3SAS_ADAPTER *ioc,
7013 Mpi2SasDevicePage0_t *sas_device_pg0)
7014 {
7015         struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
7016         struct scsi_target *starget;
7017         struct _sas_device *sas_device;
7018         unsigned long flags;
7019
7020         spin_lock_irqsave(&ioc->sas_device_lock, flags);
7021         list_for_each_entry(sas_device, &ioc->sas_device_list, list) {
7022                 if ((sas_device->sas_address == sas_device_pg0->SASAddress) &&
7023                         (sas_device->slot == sas_device_pg0->Slot)) {
7024                         sas_device->responding = 1;
7025                         starget = sas_device->starget;
7026                         if (starget && starget->hostdata) {
7027                                 sas_target_priv_data = starget->hostdata;
7028                                 sas_target_priv_data->tm_busy = 0;
7029                                 sas_target_priv_data->deleted = 0;
7030                         } else
7031                                 sas_target_priv_data = NULL;
7032                         if (starget) {
7033                                 starget_printk(KERN_INFO, starget,
7034                                     "handle(0x%04x), sas_addr(0x%016llx)\n",
7035                                     sas_device_pg0->DevHandle,
7036                                     (unsigned long long)
7037                                     sas_device->sas_address);
7038
7039                                 if (sas_device->enclosure_handle != 0)
7040                                         starget_printk(KERN_INFO, starget,
7041                                          "enclosure logical id(0x%016llx),"
7042                                          " slot(%d)\n",
7043                                          (unsigned long long)
7044                                          sas_device->enclosure_logical_id,
7045                                          sas_device->slot);
7046                         }
7047                         if (sas_device_pg0->Flags &
7048                               MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
7049                                 sas_device->enclosure_level =
7050                                    le16_to_cpu(sas_device_pg0->EnclosureLevel);
7051                                 memcpy(&sas_device->connector_name[0],
7052                                         &sas_device_pg0->ConnectorName[0], 4);
7053                         } else {
7054                                 sas_device->enclosure_level = 0;
7055                                 sas_device->connector_name[0] = '\0';
7056                         }
7057
7058                         if (sas_device->handle == sas_device_pg0->DevHandle)
7059                                 goto out;
7060                         pr_info("\thandle changed from(0x%04x)!!!\n",
7061                             sas_device->handle);
7062                         sas_device->handle = sas_device_pg0->DevHandle;
7063                         if (sas_target_priv_data)
7064                                 sas_target_priv_data->handle =
7065                                         sas_device_pg0->DevHandle;
7066                         goto out;
7067                 }
7068         }
7069  out:
7070         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
7071 }
7072
7073 /**
7074  * _scsih_search_responding_sas_devices -
7075  * @ioc: per adapter object
7076  *
7077  * After host reset, find out whether devices are still responding.
7078  * If not remove.
7079  *
7080  * Return nothing.
7081  */
7082 static void
7083 _scsih_search_responding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
7084 {
7085         Mpi2SasDevicePage0_t sas_device_pg0;
7086         Mpi2ConfigReply_t mpi_reply;
7087         u16 ioc_status;
7088         u16 handle;
7089         u32 device_info;
7090
7091         pr_info(MPT3SAS_FMT "search for end-devices: start\n", ioc->name);
7092
7093         if (list_empty(&ioc->sas_device_list))
7094                 goto out;
7095
7096         handle = 0xFFFF;
7097         while (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
7098             &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
7099             handle))) {
7100                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7101                     MPI2_IOCSTATUS_MASK;
7102                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
7103                         break;
7104                 handle = sas_device_pg0.DevHandle =
7105                                 le16_to_cpu(sas_device_pg0.DevHandle);
7106                 device_info = le32_to_cpu(sas_device_pg0.DeviceInfo);
7107                 if (!(_scsih_is_end_device(device_info)))
7108                         continue;
7109                 sas_device_pg0.SASAddress =
7110                                 le64_to_cpu(sas_device_pg0.SASAddress);
7111                 sas_device_pg0.Slot = le16_to_cpu(sas_device_pg0.Slot);
7112                 _scsih_mark_responding_sas_device(ioc, &sas_device_pg0);
7113         }
7114
7115  out:
7116         pr_info(MPT3SAS_FMT "search for end-devices: complete\n",
7117             ioc->name);
7118 }
7119
7120 /**
7121  * _scsih_mark_responding_raid_device - mark a raid_device as responding
7122  * @ioc: per adapter object
7123  * @wwid: world wide identifier for raid volume
7124  * @handle: device handle
7125  *
7126  * After host reset, find out whether devices are still responding.
7127  * Used in _scsih_remove_unresponsive_raid_devices.
7128  *
7129  * Return nothing.
7130  */
7131 static void
7132 _scsih_mark_responding_raid_device(struct MPT3SAS_ADAPTER *ioc, u64 wwid,
7133         u16 handle)
7134 {
7135         struct MPT3SAS_TARGET *sas_target_priv_data = NULL;
7136         struct scsi_target *starget;
7137         struct _raid_device *raid_device;
7138         unsigned long flags;
7139
7140         spin_lock_irqsave(&ioc->raid_device_lock, flags);
7141         list_for_each_entry(raid_device, &ioc->raid_device_list, list) {
7142                 if (raid_device->wwid == wwid && raid_device->starget) {
7143                         starget = raid_device->starget;
7144                         if (starget && starget->hostdata) {
7145                                 sas_target_priv_data = starget->hostdata;
7146                                 sas_target_priv_data->deleted = 0;
7147                         } else
7148                                 sas_target_priv_data = NULL;
7149                         raid_device->responding = 1;
7150                         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
7151                         starget_printk(KERN_INFO, raid_device->starget,
7152                             "handle(0x%04x), wwid(0x%016llx)\n", handle,
7153                             (unsigned long long)raid_device->wwid);
7154
7155                         /*
7156                          * WARPDRIVE: The handles of the PDs might have changed
7157                          * across the host reset so re-initialize the
7158                          * required data for Direct IO
7159                          */
7160                         mpt3sas_init_warpdrive_properties(ioc, raid_device);
7161                         spin_lock_irqsave(&ioc->raid_device_lock, flags);
7162                         if (raid_device->handle == handle) {
7163                                 spin_unlock_irqrestore(&ioc->raid_device_lock,
7164                                     flags);
7165                                 return;
7166                         }
7167                         pr_info("\thandle changed from(0x%04x)!!!\n",
7168                             raid_device->handle);
7169                         raid_device->handle = handle;
7170                         if (sas_target_priv_data)
7171                                 sas_target_priv_data->handle = handle;
7172                         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
7173                         return;
7174                 }
7175         }
7176         spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
7177 }
7178
7179 /**
7180  * _scsih_search_responding_raid_devices -
7181  * @ioc: per adapter object
7182  *
7183  * After host reset, find out whether devices are still responding.
7184  * If not remove.
7185  *
7186  * Return nothing.
7187  */
7188 static void
7189 _scsih_search_responding_raid_devices(struct MPT3SAS_ADAPTER *ioc)
7190 {
7191         Mpi2RaidVolPage1_t volume_pg1;
7192         Mpi2RaidVolPage0_t volume_pg0;
7193         Mpi2RaidPhysDiskPage0_t pd_pg0;
7194         Mpi2ConfigReply_t mpi_reply;
7195         u16 ioc_status;
7196         u16 handle;
7197         u8 phys_disk_num;
7198
7199         if (!ioc->ir_firmware)
7200                 return;
7201
7202         pr_info(MPT3SAS_FMT "search for raid volumes: start\n",
7203             ioc->name);
7204
7205         if (list_empty(&ioc->raid_device_list))
7206                 goto out;
7207
7208         handle = 0xFFFF;
7209         while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
7210             &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
7211                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7212                     MPI2_IOCSTATUS_MASK;
7213                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
7214                         break;
7215                 handle = le16_to_cpu(volume_pg1.DevHandle);
7216
7217                 if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
7218                     &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
7219                      sizeof(Mpi2RaidVolPage0_t)))
7220                         continue;
7221
7222                 if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
7223                     volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
7224                     volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED)
7225                         _scsih_mark_responding_raid_device(ioc,
7226                             le64_to_cpu(volume_pg1.WWID), handle);
7227         }
7228
7229         /* refresh the pd_handles */
7230         if (!ioc->is_warpdrive) {
7231                 phys_disk_num = 0xFF;
7232                 memset(ioc->pd_handles, 0, ioc->pd_handles_sz);
7233                 while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
7234                     &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
7235                     phys_disk_num))) {
7236                         ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7237                             MPI2_IOCSTATUS_MASK;
7238                         if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
7239                                 break;
7240                         phys_disk_num = pd_pg0.PhysDiskNum;
7241                         handle = le16_to_cpu(pd_pg0.DevHandle);
7242                         set_bit(handle, ioc->pd_handles);
7243                 }
7244         }
7245  out:
7246         pr_info(MPT3SAS_FMT "search for responding raid volumes: complete\n",
7247                 ioc->name);
7248 }
7249
7250 /**
7251  * _scsih_mark_responding_expander - mark a expander as responding
7252  * @ioc: per adapter object
7253  * @sas_address: sas address
7254  * @handle:
7255  *
7256  * After host reset, find out whether devices are still responding.
7257  * Used in _scsih_remove_unresponsive_expanders.
7258  *
7259  * Return nothing.
7260  */
7261 static void
7262 _scsih_mark_responding_expander(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
7263         u16 handle)
7264 {
7265         struct _sas_node *sas_expander;
7266         unsigned long flags;
7267         int i;
7268
7269         spin_lock_irqsave(&ioc->sas_node_lock, flags);
7270         list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
7271                 if (sas_expander->sas_address != sas_address)
7272                         continue;
7273                 sas_expander->responding = 1;
7274                 if (sas_expander->handle == handle)
7275                         goto out;
7276                 pr_info("\texpander(0x%016llx): handle changed" \
7277                     " from(0x%04x) to (0x%04x)!!!\n",
7278                     (unsigned long long)sas_expander->sas_address,
7279                     sas_expander->handle, handle);
7280                 sas_expander->handle = handle;
7281                 for (i = 0 ; i < sas_expander->num_phys ; i++)
7282                         sas_expander->phy[i].handle = handle;
7283                 goto out;
7284         }
7285  out:
7286         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
7287 }
7288
7289 /**
7290  * _scsih_search_responding_expanders -
7291  * @ioc: per adapter object
7292  *
7293  * After host reset, find out whether devices are still responding.
7294  * If not remove.
7295  *
7296  * Return nothing.
7297  */
7298 static void
7299 _scsih_search_responding_expanders(struct MPT3SAS_ADAPTER *ioc)
7300 {
7301         Mpi2ExpanderPage0_t expander_pg0;
7302         Mpi2ConfigReply_t mpi_reply;
7303         u16 ioc_status;
7304         u64 sas_address;
7305         u16 handle;
7306
7307         pr_info(MPT3SAS_FMT "search for expanders: start\n", ioc->name);
7308
7309         if (list_empty(&ioc->sas_expander_list))
7310                 goto out;
7311
7312         handle = 0xFFFF;
7313         while (!(mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
7314             MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
7315
7316                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7317                     MPI2_IOCSTATUS_MASK;
7318                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS)
7319                         break;
7320
7321                 handle = le16_to_cpu(expander_pg0.DevHandle);
7322                 sas_address = le64_to_cpu(expander_pg0.SASAddress);
7323                 pr_info("\texpander present: handle(0x%04x), sas_addr(0x%016llx)\n",
7324                         handle,
7325                     (unsigned long long)sas_address);
7326                 _scsih_mark_responding_expander(ioc, sas_address, handle);
7327         }
7328
7329  out:
7330         pr_info(MPT3SAS_FMT "search for expanders: complete\n", ioc->name);
7331 }
7332
7333 /**
7334  * _scsih_remove_unresponding_sas_devices - removing unresponding devices
7335  * @ioc: per adapter object
7336  *
7337  * Return nothing.
7338  */
7339 static void
7340 _scsih_remove_unresponding_sas_devices(struct MPT3SAS_ADAPTER *ioc)
7341 {
7342         struct _sas_device *sas_device, *sas_device_next;
7343         struct _sas_node *sas_expander, *sas_expander_next;
7344         struct _raid_device *raid_device, *raid_device_next;
7345         struct list_head tmp_list;
7346         unsigned long flags;
7347         LIST_HEAD(head);
7348
7349         pr_info(MPT3SAS_FMT "removing unresponding devices: start\n",
7350             ioc->name);
7351
7352         /* removing unresponding end devices */
7353         pr_info(MPT3SAS_FMT "removing unresponding devices: end-devices\n",
7354             ioc->name);
7355         /*
7356          * Iterate, pulling off devices marked as non-responding. We become the
7357          * owner for the reference the list had on any object we prune.
7358          */
7359         spin_lock_irqsave(&ioc->sas_device_lock, flags);
7360         list_for_each_entry_safe(sas_device, sas_device_next,
7361             &ioc->sas_device_list, list) {
7362                 if (!sas_device->responding)
7363                         list_move_tail(&sas_device->list, &head);
7364                 else
7365                         sas_device->responding = 0;
7366         }
7367         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
7368
7369         /*
7370          * Now, uninitialize and remove the unresponding devices we pruned.
7371          */
7372         list_for_each_entry_safe(sas_device, sas_device_next, &head, list) {
7373                 _scsih_remove_device(ioc, sas_device);
7374                 list_del_init(&sas_device->list);
7375                 sas_device_put(sas_device);
7376         }
7377
7378         /* removing unresponding volumes */
7379         if (ioc->ir_firmware) {
7380                 pr_info(MPT3SAS_FMT "removing unresponding devices: volumes\n",
7381                         ioc->name);
7382                 list_for_each_entry_safe(raid_device, raid_device_next,
7383                     &ioc->raid_device_list, list) {
7384                         if (!raid_device->responding)
7385                                 _scsih_sas_volume_delete(ioc,
7386                                     raid_device->handle);
7387                         else
7388                                 raid_device->responding = 0;
7389                 }
7390         }
7391
7392         /* removing unresponding expanders */
7393         pr_info(MPT3SAS_FMT "removing unresponding devices: expanders\n",
7394             ioc->name);
7395         spin_lock_irqsave(&ioc->sas_node_lock, flags);
7396         INIT_LIST_HEAD(&tmp_list);
7397         list_for_each_entry_safe(sas_expander, sas_expander_next,
7398             &ioc->sas_expander_list, list) {
7399                 if (!sas_expander->responding)
7400                         list_move_tail(&sas_expander->list, &tmp_list);
7401                 else
7402                         sas_expander->responding = 0;
7403         }
7404         spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
7405         list_for_each_entry_safe(sas_expander, sas_expander_next, &tmp_list,
7406             list) {
7407                 list_del(&sas_expander->list);
7408                 _scsih_expander_node_remove(ioc, sas_expander);
7409         }
7410
7411         pr_info(MPT3SAS_FMT "removing unresponding devices: complete\n",
7412             ioc->name);
7413
7414         /* unblock devices */
7415         _scsih_ublock_io_all_device(ioc);
7416 }
7417
7418 static void
7419 _scsih_refresh_expander_links(struct MPT3SAS_ADAPTER *ioc,
7420         struct _sas_node *sas_expander, u16 handle)
7421 {
7422         Mpi2ExpanderPage1_t expander_pg1;
7423         Mpi2ConfigReply_t mpi_reply;
7424         int i;
7425
7426         for (i = 0 ; i < sas_expander->num_phys ; i++) {
7427                 if ((mpt3sas_config_get_expander_pg1(ioc, &mpi_reply,
7428                     &expander_pg1, i, handle))) {
7429                         pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
7430                             ioc->name, __FILE__, __LINE__, __func__);
7431                         return;
7432                 }
7433
7434                 mpt3sas_transport_update_links(ioc, sas_expander->sas_address,
7435                     le16_to_cpu(expander_pg1.AttachedDevHandle), i,
7436                     expander_pg1.NegotiatedLinkRate >> 4);
7437         }
7438 }
7439
7440 /**
7441  * _scsih_scan_for_devices_after_reset - scan for devices after host reset
7442  * @ioc: per adapter object
7443  *
7444  * Return nothing.
7445  */
7446 static void
7447 _scsih_scan_for_devices_after_reset(struct MPT3SAS_ADAPTER *ioc)
7448 {
7449         Mpi2ExpanderPage0_t expander_pg0;
7450         Mpi2SasDevicePage0_t sas_device_pg0;
7451         Mpi2RaidVolPage1_t volume_pg1;
7452         Mpi2RaidVolPage0_t volume_pg0;
7453         Mpi2RaidPhysDiskPage0_t pd_pg0;
7454         Mpi2EventIrConfigElement_t element;
7455         Mpi2ConfigReply_t mpi_reply;
7456         u8 phys_disk_num;
7457         u16 ioc_status;
7458         u16 handle, parent_handle;
7459         u64 sas_address;
7460         struct _sas_device *sas_device;
7461         struct _sas_node *expander_device;
7462         static struct _raid_device *raid_device;
7463         u8 retry_count;
7464         unsigned long flags;
7465
7466         pr_info(MPT3SAS_FMT "scan devices: start\n", ioc->name);
7467
7468         _scsih_sas_host_refresh(ioc);
7469
7470         pr_info(MPT3SAS_FMT "\tscan devices: expanders start\n", ioc->name);
7471
7472         /* expanders */
7473         handle = 0xFFFF;
7474         while (!(mpt3sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
7475             MPI2_SAS_EXPAND_PGAD_FORM_GET_NEXT_HNDL, handle))) {
7476                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7477                     MPI2_IOCSTATUS_MASK;
7478                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7479                         pr_info(MPT3SAS_FMT "\tbreak from expander scan: " \
7480                             "ioc_status(0x%04x), loginfo(0x%08x)\n",
7481                             ioc->name, ioc_status,
7482                             le32_to_cpu(mpi_reply.IOCLogInfo));
7483                         break;
7484                 }
7485                 handle = le16_to_cpu(expander_pg0.DevHandle);
7486                 spin_lock_irqsave(&ioc->sas_node_lock, flags);
7487                 expander_device = mpt3sas_scsih_expander_find_by_sas_address(
7488                     ioc, le64_to_cpu(expander_pg0.SASAddress));
7489                 spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
7490                 if (expander_device)
7491                         _scsih_refresh_expander_links(ioc, expander_device,
7492                             handle);
7493                 else {
7494                         pr_info(MPT3SAS_FMT "\tBEFORE adding expander: " \
7495                             "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
7496                             handle, (unsigned long long)
7497                             le64_to_cpu(expander_pg0.SASAddress));
7498                         _scsih_expander_add(ioc, handle);
7499                         pr_info(MPT3SAS_FMT "\tAFTER adding expander: " \
7500                             "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
7501                             handle, (unsigned long long)
7502                             le64_to_cpu(expander_pg0.SASAddress));
7503                 }
7504         }
7505
7506         pr_info(MPT3SAS_FMT "\tscan devices: expanders complete\n",
7507             ioc->name);
7508
7509         if (!ioc->ir_firmware)
7510                 goto skip_to_sas;
7511
7512         pr_info(MPT3SAS_FMT "\tscan devices: phys disk start\n", ioc->name);
7513
7514         /* phys disk */
7515         phys_disk_num = 0xFF;
7516         while (!(mpt3sas_config_get_phys_disk_pg0(ioc, &mpi_reply,
7517             &pd_pg0, MPI2_PHYSDISK_PGAD_FORM_GET_NEXT_PHYSDISKNUM,
7518             phys_disk_num))) {
7519                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7520                     MPI2_IOCSTATUS_MASK;
7521                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7522                         pr_info(MPT3SAS_FMT "\tbreak from phys disk scan: "\
7523                             "ioc_status(0x%04x), loginfo(0x%08x)\n",
7524                             ioc->name, ioc_status,
7525                             le32_to_cpu(mpi_reply.IOCLogInfo));
7526                         break;
7527                 }
7528                 phys_disk_num = pd_pg0.PhysDiskNum;
7529                 handle = le16_to_cpu(pd_pg0.DevHandle);
7530                 sas_device = mpt3sas_get_sdev_by_handle(ioc, handle);
7531                 if (sas_device) {
7532                         sas_device_put(sas_device);
7533                         continue;
7534                 }
7535                 if (mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
7536                     &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
7537                     handle) != 0)
7538                         continue;
7539                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7540                     MPI2_IOCSTATUS_MASK;
7541                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7542                         pr_info(MPT3SAS_FMT "\tbreak from phys disk scan " \
7543                             "ioc_status(0x%04x), loginfo(0x%08x)\n",
7544                             ioc->name, ioc_status,
7545                             le32_to_cpu(mpi_reply.IOCLogInfo));
7546                         break;
7547                 }
7548                 parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
7549                 if (!_scsih_get_sas_address(ioc, parent_handle,
7550                     &sas_address)) {
7551                         pr_info(MPT3SAS_FMT "\tBEFORE adding phys disk: " \
7552                             " handle (0x%04x), sas_addr(0x%016llx)\n",
7553                             ioc->name, handle, (unsigned long long)
7554                             le64_to_cpu(sas_device_pg0.SASAddress));
7555                         mpt3sas_transport_update_links(ioc, sas_address,
7556                             handle, sas_device_pg0.PhyNum,
7557                             MPI2_SAS_NEG_LINK_RATE_1_5);
7558                         set_bit(handle, ioc->pd_handles);
7559                         retry_count = 0;
7560                         /* This will retry adding the end device.
7561                          * _scsih_add_device() will decide on retries and
7562                          * return "1" when it should be retried
7563                          */
7564                         while (_scsih_add_device(ioc, handle, retry_count++,
7565                             1)) {
7566                                 ssleep(1);
7567                         }
7568                         pr_info(MPT3SAS_FMT "\tAFTER adding phys disk: " \
7569                             " handle (0x%04x), sas_addr(0x%016llx)\n",
7570                             ioc->name, handle, (unsigned long long)
7571                             le64_to_cpu(sas_device_pg0.SASAddress));
7572                 }
7573         }
7574
7575         pr_info(MPT3SAS_FMT "\tscan devices: phys disk complete\n",
7576             ioc->name);
7577
7578         pr_info(MPT3SAS_FMT "\tscan devices: volumes start\n", ioc->name);
7579
7580         /* volumes */
7581         handle = 0xFFFF;
7582         while (!(mpt3sas_config_get_raid_volume_pg1(ioc, &mpi_reply,
7583             &volume_pg1, MPI2_RAID_VOLUME_PGAD_FORM_GET_NEXT_HANDLE, handle))) {
7584                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7585                     MPI2_IOCSTATUS_MASK;
7586                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7587                         pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \
7588                             "ioc_status(0x%04x), loginfo(0x%08x)\n",
7589                             ioc->name, ioc_status,
7590                             le32_to_cpu(mpi_reply.IOCLogInfo));
7591                         break;
7592                 }
7593                 handle = le16_to_cpu(volume_pg1.DevHandle);
7594                 spin_lock_irqsave(&ioc->raid_device_lock, flags);
7595                 raid_device = _scsih_raid_device_find_by_wwid(ioc,
7596                     le64_to_cpu(volume_pg1.WWID));
7597                 spin_unlock_irqrestore(&ioc->raid_device_lock, flags);
7598                 if (raid_device)
7599                         continue;
7600                 if (mpt3sas_config_get_raid_volume_pg0(ioc, &mpi_reply,
7601                     &volume_pg0, MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, handle,
7602                      sizeof(Mpi2RaidVolPage0_t)))
7603                         continue;
7604                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7605                     MPI2_IOCSTATUS_MASK;
7606                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7607                         pr_info(MPT3SAS_FMT "\tbreak from volume scan: " \
7608                             "ioc_status(0x%04x), loginfo(0x%08x)\n",
7609                             ioc->name, ioc_status,
7610                             le32_to_cpu(mpi_reply.IOCLogInfo));
7611                         break;
7612                 }
7613                 if (volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_OPTIMAL ||
7614                     volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_ONLINE ||
7615                     volume_pg0.VolumeState == MPI2_RAID_VOL_STATE_DEGRADED) {
7616                         memset(&element, 0, sizeof(Mpi2EventIrConfigElement_t));
7617                         element.ReasonCode = MPI2_EVENT_IR_CHANGE_RC_ADDED;
7618                         element.VolDevHandle = volume_pg1.DevHandle;
7619                         pr_info(MPT3SAS_FMT
7620                                 "\tBEFORE adding volume: handle (0x%04x)\n",
7621                                 ioc->name, volume_pg1.DevHandle);
7622                         _scsih_sas_volume_add(ioc, &element);
7623                         pr_info(MPT3SAS_FMT
7624                                 "\tAFTER adding volume: handle (0x%04x)\n",
7625                                 ioc->name, volume_pg1.DevHandle);
7626                 }
7627         }
7628
7629         pr_info(MPT3SAS_FMT "\tscan devices: volumes complete\n",
7630             ioc->name);
7631
7632  skip_to_sas:
7633
7634         pr_info(MPT3SAS_FMT "\tscan devices: end devices start\n",
7635             ioc->name);
7636
7637         /* sas devices */
7638         handle = 0xFFFF;
7639         while (!(mpt3sas_config_get_sas_device_pg0(ioc, &mpi_reply,
7640             &sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE,
7641             handle))) {
7642                 ioc_status = le16_to_cpu(mpi_reply.IOCStatus) &
7643                     MPI2_IOCSTATUS_MASK;
7644                 if (ioc_status != MPI2_IOCSTATUS_SUCCESS) {
7645                         pr_info(MPT3SAS_FMT "\tbreak from end device scan:"\
7646                             " ioc_status(0x%04x), loginfo(0x%08x)\n",
7647                             ioc->name, ioc_status,
7648                             le32_to_cpu(mpi_reply.IOCLogInfo));
7649                         break;
7650                 }
7651                 handle = le16_to_cpu(sas_device_pg0.DevHandle);
7652                 if (!(_scsih_is_end_device(
7653                     le32_to_cpu(sas_device_pg0.DeviceInfo))))
7654                         continue;
7655                 sas_device = mpt3sas_get_sdev_by_addr(ioc,
7656                     le64_to_cpu(sas_device_pg0.SASAddress));
7657                 if (sas_device) {
7658                         sas_device_put(sas_device);
7659                         continue;
7660                 }
7661                 parent_handle = le16_to_cpu(sas_device_pg0.ParentDevHandle);
7662                 if (!_scsih_get_sas_address(ioc, parent_handle, &sas_address)) {
7663                         pr_info(MPT3SAS_FMT "\tBEFORE adding end device: " \
7664                             "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
7665                             handle, (unsigned long long)
7666                             le64_to_cpu(sas_device_pg0.SASAddress));
7667                         mpt3sas_transport_update_links(ioc, sas_address, handle,
7668                             sas_device_pg0.PhyNum, MPI2_SAS_NEG_LINK_RATE_1_5);
7669                         retry_count = 0;
7670                         /* This will retry adding the end device.
7671                          * _scsih_add_device() will decide on retries and
7672                          * return "1" when it should be retried
7673                          */
7674                         while (_scsih_add_device(ioc, handle, retry_count++,
7675                             0)) {
7676                                 ssleep(1);
7677                         }
7678                         pr_info(MPT3SAS_FMT "\tAFTER adding end device: " \
7679                             "handle (0x%04x), sas_addr(0x%016llx)\n", ioc->name,
7680                             handle, (unsigned long long)
7681                             le64_to_cpu(sas_device_pg0.SASAddress));
7682                 }
7683         }
7684         pr_info(MPT3SAS_FMT "\tscan devices: end devices complete\n",
7685             ioc->name);
7686
7687         pr_info(MPT3SAS_FMT "scan devices: complete\n", ioc->name);
7688 }
7689 /**
7690  * mpt3sas_scsih_reset_handler - reset callback handler (for scsih)
7691  * @ioc: per adapter object
7692  * @reset_phase: phase
7693  *
7694  * The handler for doing any required cleanup or initialization.
7695  *
7696  * The reset phase can be MPT3_IOC_PRE_RESET, MPT3_IOC_AFTER_RESET,
7697  * MPT3_IOC_DONE_RESET
7698  *
7699  * Return nothing.
7700  */
7701 void
7702 mpt3sas_scsih_reset_handler(struct MPT3SAS_ADAPTER *ioc, int reset_phase)
7703 {
7704         switch (reset_phase) {
7705         case MPT3_IOC_PRE_RESET:
7706                 dtmprintk(ioc, pr_info(MPT3SAS_FMT
7707                         "%s: MPT3_IOC_PRE_RESET\n", ioc->name, __func__));
7708                 break;
7709         case MPT3_IOC_AFTER_RESET:
7710                 dtmprintk(ioc, pr_info(MPT3SAS_FMT
7711                         "%s: MPT3_IOC_AFTER_RESET\n", ioc->name, __func__));
7712                 if (ioc->scsih_cmds.status & MPT3_CMD_PENDING) {
7713                         ioc->scsih_cmds.status |= MPT3_CMD_RESET;
7714                         mpt3sas_base_free_smid(ioc, ioc->scsih_cmds.smid);
7715                         complete(&ioc->scsih_cmds.done);
7716                 }
7717                 if (ioc->tm_cmds.status & MPT3_CMD_PENDING) {
7718                         ioc->tm_cmds.status |= MPT3_CMD_RESET;
7719                         mpt3sas_base_free_smid(ioc, ioc->tm_cmds.smid);
7720                         complete(&ioc->tm_cmds.done);
7721                 }
7722
7723                 _scsih_fw_event_cleanup_queue(ioc);
7724                 _scsih_flush_running_cmds(ioc);
7725                 break;
7726         case MPT3_IOC_DONE_RESET:
7727                 dtmprintk(ioc, pr_info(MPT3SAS_FMT
7728                         "%s: MPT3_IOC_DONE_RESET\n", ioc->name, __func__));
7729                 if ((!ioc->is_driver_loading) && !(disable_discovery > 0 &&
7730                     !ioc->sas_hba.num_phys)) {
7731                         _scsih_prep_device_scan(ioc);
7732                         _scsih_search_responding_sas_devices(ioc);
7733                         _scsih_search_responding_raid_devices(ioc);
7734                         _scsih_search_responding_expanders(ioc);
7735                         _scsih_error_recovery_delete_devices(ioc);
7736                 }
7737                 break;
7738         }
7739 }
7740
7741 /**
7742  * _mpt3sas_fw_work - delayed task for processing firmware events
7743  * @ioc: per adapter object
7744  * @fw_event: The fw_event_work object
7745  * Context: user.
7746  *
7747  * Return nothing.
7748  */
7749 static void
7750 _mpt3sas_fw_work(struct MPT3SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
7751 {
7752         _scsih_fw_event_del_from_list(ioc, fw_event);
7753
7754         /* the queue is being flushed so ignore this event */
7755         if (ioc->remove_host || ioc->pci_error_recovery) {
7756                 fw_event_work_put(fw_event);
7757                 return;
7758         }
7759
7760         switch (fw_event->event) {
7761         case MPT3SAS_PROCESS_TRIGGER_DIAG:
7762                 mpt3sas_process_trigger_data(ioc,
7763                         (struct SL_WH_TRIGGERS_EVENT_DATA_T *)
7764                         fw_event->event_data);
7765                 break;
7766         case MPT3SAS_REMOVE_UNRESPONDING_DEVICES:
7767                 while (scsi_host_in_recovery(ioc->shost) ||
7768                                          ioc->shost_recovery) {
7769                         /*
7770                          * If we're unloading, bail. Otherwise, this can become
7771                          * an infinite loop.
7772                          */
7773                         if (ioc->remove_host)
7774                                 goto out;
7775                         ssleep(1);
7776                 }
7777                 _scsih_remove_unresponding_sas_devices(ioc);
7778                 _scsih_scan_for_devices_after_reset(ioc);
7779                 break;
7780         case MPT3SAS_PORT_ENABLE_COMPLETE:
7781                 ioc->start_scan = 0;
7782         if (missing_delay[0] != -1 && missing_delay[1] != -1)
7783                         mpt3sas_base_update_missing_delay(ioc, missing_delay[0],
7784                             missing_delay[1]);
7785                 dewtprintk(ioc, pr_info(MPT3SAS_FMT
7786                         "port enable: complete from worker thread\n",
7787                         ioc->name));
7788                 break;
7789         case MPT3SAS_TURN_ON_PFA_LED:
7790                 _scsih_turn_on_pfa_led(ioc, fw_event->device_handle);
7791                 break;
7792         case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
7793                 _scsih_sas_topology_change_event(ioc, fw_event);
7794                 break;
7795         case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
7796                 _scsih_sas_device_status_change_event(ioc, fw_event);
7797                 break;
7798         case MPI2_EVENT_SAS_DISCOVERY:
7799                 _scsih_sas_discovery_event(ioc, fw_event);
7800                 break;
7801         case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
7802                 _scsih_sas_broadcast_primitive_event(ioc, fw_event);
7803                 break;
7804         case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
7805                 _scsih_sas_enclosure_dev_status_change_event(ioc,
7806                     fw_event);
7807                 break;
7808         case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
7809                 _scsih_sas_ir_config_change_event(ioc, fw_event);
7810                 break;
7811         case MPI2_EVENT_IR_VOLUME:
7812                 _scsih_sas_ir_volume_event(ioc, fw_event);
7813                 break;
7814         case MPI2_EVENT_IR_PHYSICAL_DISK:
7815                 _scsih_sas_ir_physical_disk_event(ioc, fw_event);
7816                 break;
7817         case MPI2_EVENT_IR_OPERATION_STATUS:
7818                 _scsih_sas_ir_operation_status_event(ioc, fw_event);
7819                 break;
7820         }
7821 out:
7822         fw_event_work_put(fw_event);
7823 }
7824
7825 /**
7826  * _firmware_event_work
7827  * @ioc: per adapter object
7828  * @work: The fw_event_work object
7829  * Context: user.
7830  *
7831  * wrappers for the work thread handling firmware events
7832  *
7833  * Return nothing.
7834  */
7835
7836 static void
7837 _firmware_event_work(struct work_struct *work)
7838 {
7839         struct fw_event_work *fw_event = container_of(work,
7840             struct fw_event_work, work);
7841
7842         _mpt3sas_fw_work(fw_event->ioc, fw_event);
7843 }
7844
7845 /**
7846  * mpt3sas_scsih_event_callback - firmware event handler (called at ISR time)
7847  * @ioc: per adapter object
7848  * @msix_index: MSIX table index supplied by the OS
7849  * @reply: reply message frame(lower 32bit addr)
7850  * Context: interrupt.
7851  *
7852  * This function merely adds a new work task into ioc->firmware_event_thread.
7853  * The tasks are worked from _firmware_event_work in user context.
7854  *
7855  * Return 1 meaning mf should be freed from _base_interrupt
7856  *        0 means the mf is freed from this function.
7857  */
7858 u8
7859 mpt3sas_scsih_event_callback(struct MPT3SAS_ADAPTER *ioc, u8 msix_index,
7860         u32 reply)
7861 {
7862         struct fw_event_work *fw_event;
7863         Mpi2EventNotificationReply_t *mpi_reply;
7864         u16 event;
7865         u16 sz;
7866         Mpi26EventDataActiveCableExcept_t *ActiveCableEventData;
7867
7868         /* events turned off due to host reset or driver unloading */
7869         if (ioc->remove_host || ioc->pci_error_recovery)
7870                 return 1;
7871
7872         mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
7873
7874         if (unlikely(!mpi_reply)) {
7875                 pr_err(MPT3SAS_FMT "mpi_reply not valid at %s:%d/%s()!\n",
7876                     ioc->name, __FILE__, __LINE__, __func__);
7877                 return 1;
7878         }
7879
7880         event = le16_to_cpu(mpi_reply->Event);
7881
7882         if (event != MPI2_EVENT_LOG_ENTRY_ADDED)
7883                 mpt3sas_trigger_event(ioc, event, 0);
7884
7885         switch (event) {
7886         /* handle these */
7887         case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
7888         {
7889                 Mpi2EventDataSasBroadcastPrimitive_t *baen_data =
7890                     (Mpi2EventDataSasBroadcastPrimitive_t *)
7891                     mpi_reply->EventData;
7892
7893                 if (baen_data->Primitive !=
7894                     MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT)
7895                         return 1;
7896
7897                 if (ioc->broadcast_aen_busy) {
7898                         ioc->broadcast_aen_pending++;
7899                         return 1;
7900                 } else
7901                         ioc->broadcast_aen_busy = 1;
7902                 break;
7903         }
7904
7905         case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
7906                 _scsih_check_topo_delete_events(ioc,
7907                     (Mpi2EventDataSasTopologyChangeList_t *)
7908                     mpi_reply->EventData);
7909                 break;
7910         case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
7911                 _scsih_check_ir_config_unhide_events(ioc,
7912                     (Mpi2EventDataIrConfigChangeList_t *)
7913                     mpi_reply->EventData);
7914                 break;
7915         case MPI2_EVENT_IR_VOLUME:
7916                 _scsih_check_volume_delete_events(ioc,
7917                     (Mpi2EventDataIrVolume_t *)
7918                     mpi_reply->EventData);
7919                 break;
7920         case MPI2_EVENT_LOG_ENTRY_ADDED:
7921         {
7922                 Mpi2EventDataLogEntryAdded_t *log_entry;
7923                 u32 *log_code;
7924
7925                 if (!ioc->is_warpdrive)
7926                         break;
7927
7928                 log_entry = (Mpi2EventDataLogEntryAdded_t *)
7929                     mpi_reply->EventData;
7930                 log_code = (u32 *)log_entry->LogData;
7931
7932                 if (le16_to_cpu(log_entry->LogEntryQualifier)
7933                     != MPT2_WARPDRIVE_LOGENTRY)
7934                         break;
7935
7936                 switch (le32_to_cpu(*log_code)) {
7937                 case MPT2_WARPDRIVE_LC_SSDT:
7938                         pr_warn(MPT3SAS_FMT "WarpDrive Warning: "
7939                             "IO Throttling has occurred in the WarpDrive "
7940                             "subsystem. Check WarpDrive documentation for "
7941                             "additional details.\n", ioc->name);
7942                         break;
7943                 case MPT2_WARPDRIVE_LC_SSDLW:
7944                         pr_warn(MPT3SAS_FMT "WarpDrive Warning: "
7945                             "Program/Erase Cycles for the WarpDrive subsystem "
7946                             "in degraded range. Check WarpDrive documentation "
7947                             "for additional details.\n", ioc->name);
7948                         break;
7949                 case MPT2_WARPDRIVE_LC_SSDLF:
7950                         pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: "
7951                             "There are no Program/Erase Cycles for the "
7952                             "WarpDrive subsystem. The storage device will be "
7953                             "in read-only mode. Check WarpDrive documentation "
7954                             "for additional details.\n", ioc->name);
7955                         break;
7956                 case MPT2_WARPDRIVE_LC_BRMF:
7957                         pr_err(MPT3SAS_FMT "WarpDrive Fatal Error: "
7958                             "The Backup Rail Monitor has failed on the "
7959                             "WarpDrive subsystem. Check WarpDrive "
7960                             "documentation for additional details.\n",
7961                             ioc->name);
7962                         break;
7963                 }
7964
7965                 break;
7966         }
7967         case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
7968         case MPI2_EVENT_IR_OPERATION_STATUS:
7969         case MPI2_EVENT_SAS_DISCOVERY:
7970         case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
7971         case MPI2_EVENT_IR_PHYSICAL_DISK:
7972                 break;
7973
7974         case MPI2_EVENT_TEMP_THRESHOLD:
7975                 _scsih_temp_threshold_events(ioc,
7976                         (Mpi2EventDataTemperature_t *)
7977                         mpi_reply->EventData);
7978                 break;
7979         case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
7980                 ActiveCableEventData =
7981                     (Mpi26EventDataActiveCableExcept_t *) mpi_reply->EventData;
7982                 if (ActiveCableEventData->ReasonCode ==
7983                                 MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER) {
7984                         pr_info(MPT3SAS_FMT "Currently an active cable with ReceptacleID %d",
7985                             ioc->name, ActiveCableEventData->ReceptacleID);
7986                         pr_info("cannot be powered and devices connected to this active cable");
7987                         pr_info("will not be seen. This active cable");
7988                         pr_info("requires %d mW of power",
7989                             ActiveCableEventData->ActiveCablePowerRequirement);
7990                 }
7991                 break;
7992
7993         default: /* ignore the rest */
7994                 return 1;
7995         }
7996
7997         sz = le16_to_cpu(mpi_reply->EventDataLength) * 4;
7998         fw_event = alloc_fw_event_work(sz);
7999         if (!fw_event) {
8000                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
8001                     ioc->name, __FILE__, __LINE__, __func__);
8002                 return 1;
8003         }
8004
8005         memcpy(fw_event->event_data, mpi_reply->EventData, sz);
8006         fw_event->ioc = ioc;
8007         fw_event->VF_ID = mpi_reply->VF_ID;
8008         fw_event->VP_ID = mpi_reply->VP_ID;
8009         fw_event->event = event;
8010         _scsih_fw_event_add(ioc, fw_event);
8011         fw_event_work_put(fw_event);
8012         return 1;
8013 }
8014
8015 /**
8016  * _scsih_expander_node_remove - removing expander device from list.
8017  * @ioc: per adapter object
8018  * @sas_expander: the sas_device object
8019  * Context: Calling function should acquire ioc->sas_node_lock.
8020  *
8021  * Removing object and freeing associated memory from the
8022  * ioc->sas_expander_list.
8023  *
8024  * Return nothing.
8025  */
8026 static void
8027 _scsih_expander_node_remove(struct MPT3SAS_ADAPTER *ioc,
8028         struct _sas_node *sas_expander)
8029 {
8030         struct _sas_port *mpt3sas_port, *next;
8031
8032         /* remove sibling ports attached to this expander */
8033         list_for_each_entry_safe(mpt3sas_port, next,
8034            &sas_expander->sas_port_list, port_list) {
8035                 if (ioc->shost_recovery)
8036                         return;
8037                 if (mpt3sas_port->remote_identify.device_type ==
8038                     SAS_END_DEVICE)
8039                         mpt3sas_device_remove_by_sas_address(ioc,
8040                             mpt3sas_port->remote_identify.sas_address);
8041                 else if (mpt3sas_port->remote_identify.device_type ==
8042                     SAS_EDGE_EXPANDER_DEVICE ||
8043                     mpt3sas_port->remote_identify.device_type ==
8044                     SAS_FANOUT_EXPANDER_DEVICE)
8045                         mpt3sas_expander_remove(ioc,
8046                             mpt3sas_port->remote_identify.sas_address);
8047         }
8048
8049         mpt3sas_transport_port_remove(ioc, sas_expander->sas_address,
8050             sas_expander->sas_address_parent);
8051
8052         pr_info(MPT3SAS_FMT
8053                 "expander_remove: handle(0x%04x), sas_addr(0x%016llx)\n",
8054                 ioc->name,
8055             sas_expander->handle, (unsigned long long)
8056             sas_expander->sas_address);
8057
8058         kfree(sas_expander->phy);
8059         kfree(sas_expander);
8060 }
8061
8062 /**
8063  * _scsih_ir_shutdown - IR shutdown notification
8064  * @ioc: per adapter object
8065  *
8066  * Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
8067  * the host system is shutting down.
8068  *
8069  * Return nothing.
8070  */
8071 static void
8072 _scsih_ir_shutdown(struct MPT3SAS_ADAPTER *ioc)
8073 {
8074         Mpi2RaidActionRequest_t *mpi_request;
8075         Mpi2RaidActionReply_t *mpi_reply;
8076         u16 smid;
8077
8078         /* is IR firmware build loaded ? */
8079         if (!ioc->ir_firmware)
8080                 return;
8081
8082         /* are there any volumes ? */
8083         if (list_empty(&ioc->raid_device_list))
8084                 return;
8085
8086         mutex_lock(&ioc->scsih_cmds.mutex);
8087
8088         if (ioc->scsih_cmds.status != MPT3_CMD_NOT_USED) {
8089                 pr_err(MPT3SAS_FMT "%s: scsih_cmd in use\n",
8090                     ioc->name, __func__);
8091                 goto out;
8092         }
8093         ioc->scsih_cmds.status = MPT3_CMD_PENDING;
8094
8095         smid = mpt3sas_base_get_smid(ioc, ioc->scsih_cb_idx);
8096         if (!smid) {
8097                 pr_err(MPT3SAS_FMT "%s: failed obtaining a smid\n",
8098                     ioc->name, __func__);
8099                 ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
8100                 goto out;
8101         }
8102
8103         mpi_request = mpt3sas_base_get_msg_frame(ioc, smid);
8104         ioc->scsih_cmds.smid = smid;
8105         memset(mpi_request, 0, sizeof(Mpi2RaidActionRequest_t));
8106
8107         mpi_request->Function = MPI2_FUNCTION_RAID_ACTION;
8108         mpi_request->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
8109
8110         if (!ioc->hide_ir_msg)
8111                 pr_info(MPT3SAS_FMT "IR shutdown (sending)\n", ioc->name);
8112         init_completion(&ioc->scsih_cmds.done);
8113         mpt3sas_base_put_smid_default(ioc, smid);
8114         wait_for_completion_timeout(&ioc->scsih_cmds.done, 10*HZ);
8115
8116         if (!(ioc->scsih_cmds.status & MPT3_CMD_COMPLETE)) {
8117                 pr_err(MPT3SAS_FMT "%s: timeout\n",
8118                     ioc->name, __func__);
8119                 goto out;
8120         }
8121
8122         if (ioc->scsih_cmds.status & MPT3_CMD_REPLY_VALID) {
8123                 mpi_reply = ioc->scsih_cmds.reply;
8124                 if (!ioc->hide_ir_msg)
8125                         pr_info(MPT3SAS_FMT "IR shutdown "
8126                            "(complete): ioc_status(0x%04x), loginfo(0x%08x)\n",
8127                             ioc->name, le16_to_cpu(mpi_reply->IOCStatus),
8128                             le32_to_cpu(mpi_reply->IOCLogInfo));
8129         }
8130
8131  out:
8132         ioc->scsih_cmds.status = MPT3_CMD_NOT_USED;
8133         mutex_unlock(&ioc->scsih_cmds.mutex);
8134 }
8135
8136 /**
8137  * scsih_remove - detach and remove add host
8138  * @pdev: PCI device struct
8139  *
8140  * Routine called when unloading the driver.
8141  * Return nothing.
8142  */
8143 static void scsih_remove(struct pci_dev *pdev)
8144 {
8145         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8146         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
8147         struct _sas_port *mpt3sas_port, *next_port;
8148         struct _raid_device *raid_device, *next;
8149         struct MPT3SAS_TARGET *sas_target_priv_data;
8150         struct workqueue_struct *wq;
8151         unsigned long flags;
8152
8153         ioc->remove_host = 1;
8154         _scsih_fw_event_cleanup_queue(ioc);
8155
8156         spin_lock_irqsave(&ioc->fw_event_lock, flags);
8157         wq = ioc->firmware_event_thread;
8158         ioc->firmware_event_thread = NULL;
8159         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
8160         if (wq)
8161                 destroy_workqueue(wq);
8162
8163         /* release all the volumes */
8164         _scsih_ir_shutdown(ioc);
8165         list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
8166             list) {
8167                 if (raid_device->starget) {
8168                         sas_target_priv_data =
8169                             raid_device->starget->hostdata;
8170                         sas_target_priv_data->deleted = 1;
8171                         scsi_remove_target(&raid_device->starget->dev);
8172                 }
8173                 pr_info(MPT3SAS_FMT "removing handle(0x%04x), wwid(0x%016llx)\n",
8174                         ioc->name,  raid_device->handle,
8175                     (unsigned long long) raid_device->wwid);
8176                 _scsih_raid_device_remove(ioc, raid_device);
8177         }
8178
8179         /* free ports attached to the sas_host */
8180         list_for_each_entry_safe(mpt3sas_port, next_port,
8181            &ioc->sas_hba.sas_port_list, port_list) {
8182                 if (mpt3sas_port->remote_identify.device_type ==
8183                     SAS_END_DEVICE)
8184                         mpt3sas_device_remove_by_sas_address(ioc,
8185                             mpt3sas_port->remote_identify.sas_address);
8186                 else if (mpt3sas_port->remote_identify.device_type ==
8187                     SAS_EDGE_EXPANDER_DEVICE ||
8188                     mpt3sas_port->remote_identify.device_type ==
8189                     SAS_FANOUT_EXPANDER_DEVICE)
8190                         mpt3sas_expander_remove(ioc,
8191                             mpt3sas_port->remote_identify.sas_address);
8192         }
8193
8194         /* free phys attached to the sas_host */
8195         if (ioc->sas_hba.num_phys) {
8196                 kfree(ioc->sas_hba.phy);
8197                 ioc->sas_hba.phy = NULL;
8198                 ioc->sas_hba.num_phys = 0;
8199         }
8200
8201         sas_remove_host(shost);
8202         scsi_remove_host(shost);
8203         mpt3sas_base_detach(ioc);
8204         spin_lock(&gioc_lock);
8205         list_del(&ioc->list);
8206         spin_unlock(&gioc_lock);
8207         scsi_host_put(shost);
8208 }
8209
8210 /**
8211  * scsih_shutdown - routine call during system shutdown
8212  * @pdev: PCI device struct
8213  *
8214  * Return nothing.
8215  */
8216 static void
8217 scsih_shutdown(struct pci_dev *pdev)
8218 {
8219         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8220         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
8221         struct workqueue_struct *wq;
8222         unsigned long flags;
8223
8224         ioc->remove_host = 1;
8225         _scsih_fw_event_cleanup_queue(ioc);
8226
8227         spin_lock_irqsave(&ioc->fw_event_lock, flags);
8228         wq = ioc->firmware_event_thread;
8229         ioc->firmware_event_thread = NULL;
8230         spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
8231         if (wq)
8232                 destroy_workqueue(wq);
8233
8234         _scsih_ir_shutdown(ioc);
8235         mpt3sas_base_detach(ioc);
8236 }
8237
8238
8239 /**
8240  * _scsih_probe_boot_devices - reports 1st device
8241  * @ioc: per adapter object
8242  *
8243  * If specified in bios page 2, this routine reports the 1st
8244  * device scsi-ml or sas transport for persistent boot device
8245  * purposes.  Please refer to function _scsih_determine_boot_device()
8246  */
8247 static void
8248 _scsih_probe_boot_devices(struct MPT3SAS_ADAPTER *ioc)
8249 {
8250         u8 is_raid;
8251         void *device;
8252         struct _sas_device *sas_device;
8253         struct _raid_device *raid_device;
8254         u16 handle;
8255         u64 sas_address_parent;
8256         u64 sas_address;
8257         unsigned long flags;
8258         int rc;
8259
8260          /* no Bios, return immediately */
8261         if (!ioc->bios_pg3.BiosVersion)
8262                 return;
8263
8264         device = NULL;
8265         is_raid = 0;
8266         if (ioc->req_boot_device.device) {
8267                 device =  ioc->req_boot_device.device;
8268                 is_raid = ioc->req_boot_device.is_raid;
8269         } else if (ioc->req_alt_boot_device.device) {
8270                 device =  ioc->req_alt_boot_device.device;
8271                 is_raid = ioc->req_alt_boot_device.is_raid;
8272         } else if (ioc->current_boot_device.device) {
8273                 device =  ioc->current_boot_device.device;
8274                 is_raid = ioc->current_boot_device.is_raid;
8275         }
8276
8277         if (!device)
8278                 return;
8279
8280         if (is_raid) {
8281                 raid_device = device;
8282                 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
8283                     raid_device->id, 0);
8284                 if (rc)
8285                         _scsih_raid_device_remove(ioc, raid_device);
8286         } else {
8287                 spin_lock_irqsave(&ioc->sas_device_lock, flags);
8288                 sas_device = device;
8289                 handle = sas_device->handle;
8290                 sas_address_parent = sas_device->sas_address_parent;
8291                 sas_address = sas_device->sas_address;
8292                 list_move_tail(&sas_device->list, &ioc->sas_device_list);
8293                 spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
8294
8295                 if (ioc->hide_drives)
8296                         return;
8297                 if (!mpt3sas_transport_port_add(ioc, handle,
8298                     sas_address_parent)) {
8299                         _scsih_sas_device_remove(ioc, sas_device);
8300                 } else if (!sas_device->starget) {
8301                         if (!ioc->is_driver_loading) {
8302                                 mpt3sas_transport_port_remove(ioc,
8303                                     sas_address,
8304                                     sas_address_parent);
8305                                 _scsih_sas_device_remove(ioc, sas_device);
8306                         }
8307                 }
8308         }
8309 }
8310
8311 /**
8312  * _scsih_probe_raid - reporting raid volumes to scsi-ml
8313  * @ioc: per adapter object
8314  *
8315  * Called during initial loading of the driver.
8316  */
8317 static void
8318 _scsih_probe_raid(struct MPT3SAS_ADAPTER *ioc)
8319 {
8320         struct _raid_device *raid_device, *raid_next;
8321         int rc;
8322
8323         list_for_each_entry_safe(raid_device, raid_next,
8324             &ioc->raid_device_list, list) {
8325                 if (raid_device->starget)
8326                         continue;
8327                 rc = scsi_add_device(ioc->shost, RAID_CHANNEL,
8328                     raid_device->id, 0);
8329                 if (rc)
8330                         _scsih_raid_device_remove(ioc, raid_device);
8331         }
8332 }
8333
8334 static struct _sas_device *get_next_sas_device(struct MPT3SAS_ADAPTER *ioc)
8335 {
8336         struct _sas_device *sas_device = NULL;
8337         unsigned long flags;
8338
8339         spin_lock_irqsave(&ioc->sas_device_lock, flags);
8340         if (!list_empty(&ioc->sas_device_init_list)) {
8341                 sas_device = list_first_entry(&ioc->sas_device_init_list,
8342                                 struct _sas_device, list);
8343                 sas_device_get(sas_device);
8344         }
8345         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
8346
8347         return sas_device;
8348 }
8349
8350 static void sas_device_make_active(struct MPT3SAS_ADAPTER *ioc,
8351                 struct _sas_device *sas_device)
8352 {
8353         unsigned long flags;
8354
8355         spin_lock_irqsave(&ioc->sas_device_lock, flags);
8356
8357         /*
8358          * Since we dropped the lock during the call to port_add(), we need to
8359          * be careful here that somebody else didn't move or delete this item
8360          * while we were busy with other things.
8361          *
8362          * If it was on the list, we need a put() for the reference the list
8363          * had. Either way, we need a get() for the destination list.
8364          */
8365         if (!list_empty(&sas_device->list)) {
8366                 list_del_init(&sas_device->list);
8367                 sas_device_put(sas_device);
8368         }
8369
8370         sas_device_get(sas_device);
8371         list_add_tail(&sas_device->list, &ioc->sas_device_list);
8372
8373         spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
8374 }
8375
8376 /**
8377  * _scsih_probe_sas - reporting sas devices to sas transport
8378  * @ioc: per adapter object
8379  *
8380  * Called during initial loading of the driver.
8381  */
8382 static void
8383 _scsih_probe_sas(struct MPT3SAS_ADAPTER *ioc)
8384 {
8385         struct _sas_device *sas_device;
8386
8387         if (ioc->hide_drives)
8388                 return;
8389
8390         while ((sas_device = get_next_sas_device(ioc))) {
8391                 if (!mpt3sas_transport_port_add(ioc, sas_device->handle,
8392                     sas_device->sas_address_parent)) {
8393                         _scsih_sas_device_remove(ioc, sas_device);
8394                         sas_device_put(sas_device);
8395                         continue;
8396                 } else if (!sas_device->starget) {
8397                         /*
8398                          * When asyn scanning is enabled, its not possible to
8399                          * remove devices while scanning is turned on due to an
8400                          * oops in scsi_sysfs_add_sdev()->add_device()->
8401                          * sysfs_addrm_start()
8402                          */
8403                         if (!ioc->is_driver_loading) {
8404                                 mpt3sas_transport_port_remove(ioc,
8405                                     sas_device->sas_address,
8406                                     sas_device->sas_address_parent);
8407                                 _scsih_sas_device_remove(ioc, sas_device);
8408                                 sas_device_put(sas_device);
8409                                 continue;
8410                         }
8411                 }
8412                 sas_device_make_active(ioc, sas_device);
8413                 sas_device_put(sas_device);
8414         }
8415 }
8416
8417 /**
8418  * _scsih_probe_devices - probing for devices
8419  * @ioc: per adapter object
8420  *
8421  * Called during initial loading of the driver.
8422  */
8423 static void
8424 _scsih_probe_devices(struct MPT3SAS_ADAPTER *ioc)
8425 {
8426         u16 volume_mapping_flags;
8427
8428         if (!(ioc->facts.ProtocolFlags & MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR))
8429                 return;  /* return when IOC doesn't support initiator mode */
8430
8431         _scsih_probe_boot_devices(ioc);
8432
8433         if (ioc->ir_firmware) {
8434                 volume_mapping_flags =
8435                     le16_to_cpu(ioc->ioc_pg8.IRVolumeMappingFlags) &
8436                     MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
8437                 if (volume_mapping_flags ==
8438                     MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
8439                         _scsih_probe_raid(ioc);
8440                         _scsih_probe_sas(ioc);
8441                 } else {
8442                         _scsih_probe_sas(ioc);
8443                         _scsih_probe_raid(ioc);
8444                 }
8445         } else
8446                 _scsih_probe_sas(ioc);
8447 }
8448
8449 /**
8450  * scsih_scan_start - scsi lld callback for .scan_start
8451  * @shost: SCSI host pointer
8452  *
8453  * The shost has the ability to discover targets on its own instead
8454  * of scanning the entire bus.  In our implemention, we will kick off
8455  * firmware discovery.
8456  */
8457 static void
8458 scsih_scan_start(struct Scsi_Host *shost)
8459 {
8460         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
8461         int rc;
8462         if (diag_buffer_enable != -1 && diag_buffer_enable != 0)
8463                 mpt3sas_enable_diag_buffer(ioc, diag_buffer_enable);
8464
8465         if (disable_discovery > 0)
8466                 return;
8467
8468         ioc->start_scan = 1;
8469         rc = mpt3sas_port_enable(ioc);
8470
8471         if (rc != 0)
8472                 pr_info(MPT3SAS_FMT "port enable: FAILED\n", ioc->name);
8473 }
8474
8475 /**
8476  * scsih_scan_finished - scsi lld callback for .scan_finished
8477  * @shost: SCSI host pointer
8478  * @time: elapsed time of the scan in jiffies
8479  *
8480  * This function will be called periodicallyn until it returns 1 with the
8481  * scsi_host and the elapsed time of the scan in jiffies. In our implemention,
8482  * we wait for firmware discovery to complete, then return 1.
8483  */
8484 static int
8485 scsih_scan_finished(struct Scsi_Host *shost, unsigned long time)
8486 {
8487         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
8488
8489         if (disable_discovery > 0) {
8490                 ioc->is_driver_loading = 0;
8491                 ioc->wait_for_discovery_to_complete = 0;
8492                 return 1;
8493         }
8494
8495         if (time >= (300 * HZ)) {
8496                 ioc->base_cmds.status = MPT3_CMD_NOT_USED;
8497                 pr_info(MPT3SAS_FMT
8498                         "port enable: FAILED with timeout (timeout=300s)\n",
8499                         ioc->name);
8500                 ioc->is_driver_loading = 0;
8501                 return 1;
8502         }
8503
8504         if (ioc->start_scan)
8505                 return 0;
8506
8507         if (ioc->start_scan_failed) {
8508                 pr_info(MPT3SAS_FMT
8509                         "port enable: FAILED with (ioc_status=0x%08x)\n",
8510                         ioc->name, ioc->start_scan_failed);
8511                 ioc->is_driver_loading = 0;
8512                 ioc->wait_for_discovery_to_complete = 0;
8513                 ioc->remove_host = 1;
8514                 return 1;
8515         }
8516
8517         pr_info(MPT3SAS_FMT "port enable: SUCCESS\n", ioc->name);
8518         ioc->base_cmds.status = MPT3_CMD_NOT_USED;
8519
8520         if (ioc->wait_for_discovery_to_complete) {
8521                 ioc->wait_for_discovery_to_complete = 0;
8522                 _scsih_probe_devices(ioc);
8523         }
8524         mpt3sas_base_start_watchdog(ioc);
8525         ioc->is_driver_loading = 0;
8526         return 1;
8527 }
8528
8529 /* shost template for SAS 2.0 HBA devices */
8530 static struct scsi_host_template mpt2sas_driver_template = {
8531         .module                         = THIS_MODULE,
8532         .name                           = "Fusion MPT SAS Host",
8533         .proc_name                      = MPT2SAS_DRIVER_NAME,
8534         .queuecommand                   = scsih_qcmd,
8535         .target_alloc                   = scsih_target_alloc,
8536         .slave_alloc                    = scsih_slave_alloc,
8537         .slave_configure                = scsih_slave_configure,
8538         .target_destroy                 = scsih_target_destroy,
8539         .slave_destroy                  = scsih_slave_destroy,
8540         .scan_finished                  = scsih_scan_finished,
8541         .scan_start                     = scsih_scan_start,
8542         .change_queue_depth             = scsih_change_queue_depth,
8543         .eh_abort_handler               = scsih_abort,
8544         .eh_device_reset_handler        = scsih_dev_reset,
8545         .eh_target_reset_handler        = scsih_target_reset,
8546         .eh_host_reset_handler          = scsih_host_reset,
8547         .bios_param                     = scsih_bios_param,
8548         .can_queue                      = 1,
8549         .this_id                        = -1,
8550         .sg_tablesize                   = MPT2SAS_SG_DEPTH,
8551         .max_sectors                    = 32767,
8552         .cmd_per_lun                    = 7,
8553         .use_clustering                 = ENABLE_CLUSTERING,
8554         .shost_attrs                    = mpt3sas_host_attrs,
8555         .sdev_attrs                     = mpt3sas_dev_attrs,
8556         .track_queue_depth              = 1,
8557 };
8558
8559 /* raid transport support for SAS 2.0 HBA devices */
8560 static struct raid_function_template mpt2sas_raid_functions = {
8561         .cookie         = &mpt2sas_driver_template,
8562         .is_raid        = scsih_is_raid,
8563         .get_resync     = scsih_get_resync,
8564         .get_state      = scsih_get_state,
8565 };
8566
8567 /* shost template for SAS 3.0 HBA devices */
8568 static struct scsi_host_template mpt3sas_driver_template = {
8569         .module                         = THIS_MODULE,
8570         .name                           = "Fusion MPT SAS Host",
8571         .proc_name                      = MPT3SAS_DRIVER_NAME,
8572         .queuecommand                   = scsih_qcmd,
8573         .target_alloc                   = scsih_target_alloc,
8574         .slave_alloc                    = scsih_slave_alloc,
8575         .slave_configure                = scsih_slave_configure,
8576         .target_destroy                 = scsih_target_destroy,
8577         .slave_destroy                  = scsih_slave_destroy,
8578         .scan_finished                  = scsih_scan_finished,
8579         .scan_start                     = scsih_scan_start,
8580         .change_queue_depth             = scsih_change_queue_depth,
8581         .eh_abort_handler               = scsih_abort,
8582         .eh_device_reset_handler        = scsih_dev_reset,
8583         .eh_target_reset_handler        = scsih_target_reset,
8584         .eh_host_reset_handler          = scsih_host_reset,
8585         .bios_param                     = scsih_bios_param,
8586         .can_queue                      = 1,
8587         .this_id                        = -1,
8588         .sg_tablesize                   = MPT3SAS_SG_DEPTH,
8589         .max_sectors                    = 32767,
8590         .cmd_per_lun                    = 7,
8591         .use_clustering                 = ENABLE_CLUSTERING,
8592         .shost_attrs                    = mpt3sas_host_attrs,
8593         .sdev_attrs                     = mpt3sas_dev_attrs,
8594         .track_queue_depth              = 1,
8595 };
8596
8597 /* raid transport support for SAS 3.0 HBA devices */
8598 static struct raid_function_template mpt3sas_raid_functions = {
8599         .cookie         = &mpt3sas_driver_template,
8600         .is_raid        = scsih_is_raid,
8601         .get_resync     = scsih_get_resync,
8602         .get_state      = scsih_get_state,
8603 };
8604
8605 /**
8606  * _scsih_determine_hba_mpi_version - determine in which MPI version class
8607  *                                      this device belongs to.
8608  * @pdev: PCI device struct
8609  *
8610  * return MPI2_VERSION for SAS 2.0 HBA devices,
8611  *      MPI25_VERSION for SAS 3.0 HBA devices, and
8612  *      MPI26 VERSION for Cutlass & Invader SAS 3.0 HBA devices
8613  */
8614 static u16
8615 _scsih_determine_hba_mpi_version(struct pci_dev *pdev)
8616 {
8617
8618         switch (pdev->device) {
8619         case MPI2_MFGPAGE_DEVID_SSS6200:
8620         case MPI2_MFGPAGE_DEVID_SAS2004:
8621         case MPI2_MFGPAGE_DEVID_SAS2008:
8622         case MPI2_MFGPAGE_DEVID_SAS2108_1:
8623         case MPI2_MFGPAGE_DEVID_SAS2108_2:
8624         case MPI2_MFGPAGE_DEVID_SAS2108_3:
8625         case MPI2_MFGPAGE_DEVID_SAS2116_1:
8626         case MPI2_MFGPAGE_DEVID_SAS2116_2:
8627         case MPI2_MFGPAGE_DEVID_SAS2208_1:
8628         case MPI2_MFGPAGE_DEVID_SAS2208_2:
8629         case MPI2_MFGPAGE_DEVID_SAS2208_3:
8630         case MPI2_MFGPAGE_DEVID_SAS2208_4:
8631         case MPI2_MFGPAGE_DEVID_SAS2208_5:
8632         case MPI2_MFGPAGE_DEVID_SAS2208_6:
8633         case MPI2_MFGPAGE_DEVID_SAS2308_1:
8634         case MPI2_MFGPAGE_DEVID_SAS2308_2:
8635         case MPI2_MFGPAGE_DEVID_SAS2308_3:
8636                 return MPI2_VERSION;
8637         case MPI25_MFGPAGE_DEVID_SAS3004:
8638         case MPI25_MFGPAGE_DEVID_SAS3008:
8639         case MPI25_MFGPAGE_DEVID_SAS3108_1:
8640         case MPI25_MFGPAGE_DEVID_SAS3108_2:
8641         case MPI25_MFGPAGE_DEVID_SAS3108_5:
8642         case MPI25_MFGPAGE_DEVID_SAS3108_6:
8643                 return MPI25_VERSION;
8644         case MPI26_MFGPAGE_DEVID_SAS3216:
8645         case MPI26_MFGPAGE_DEVID_SAS3224:
8646         case MPI26_MFGPAGE_DEVID_SAS3316_1:
8647         case MPI26_MFGPAGE_DEVID_SAS3316_2:
8648         case MPI26_MFGPAGE_DEVID_SAS3316_3:
8649         case MPI26_MFGPAGE_DEVID_SAS3316_4:
8650         case MPI26_MFGPAGE_DEVID_SAS3324_1:
8651         case MPI26_MFGPAGE_DEVID_SAS3324_2:
8652         case MPI26_MFGPAGE_DEVID_SAS3324_3:
8653         case MPI26_MFGPAGE_DEVID_SAS3324_4:
8654                 return MPI26_VERSION;
8655         }
8656         return 0;
8657 }
8658
8659 /**
8660  * _scsih_probe - attach and add scsi host
8661  * @pdev: PCI device struct
8662  * @id: pci device id
8663  *
8664  * Returns 0 success, anything else error.
8665  */
8666 static int
8667 _scsih_probe(struct pci_dev *pdev, const struct pci_device_id *id)
8668 {
8669         struct MPT3SAS_ADAPTER *ioc;
8670         struct Scsi_Host *shost = NULL;
8671         int rv;
8672         u16 hba_mpi_version;
8673
8674         /* Determine in which MPI version class this pci device belongs */
8675         hba_mpi_version = _scsih_determine_hba_mpi_version(pdev);
8676         if (hba_mpi_version == 0)
8677                 return -ENODEV;
8678
8679         /* Enumerate only SAS 2.0 HBA's if hbas_to_enumerate is one,
8680          * for other generation HBA's return with -ENODEV
8681          */
8682         if ((hbas_to_enumerate == 1) && (hba_mpi_version !=  MPI2_VERSION))
8683                 return -ENODEV;
8684
8685         /* Enumerate only SAS 3.0 HBA's if hbas_to_enumerate is two,
8686          * for other generation HBA's return with -ENODEV
8687          */
8688         if ((hbas_to_enumerate == 2) && (!(hba_mpi_version ==  MPI25_VERSION
8689                 || hba_mpi_version ==  MPI26_VERSION)))
8690                 return -ENODEV;
8691
8692         switch (hba_mpi_version) {
8693         case MPI2_VERSION:
8694                 /* Use mpt2sas driver host template for SAS 2.0 HBA's */
8695                 shost = scsi_host_alloc(&mpt2sas_driver_template,
8696                   sizeof(struct MPT3SAS_ADAPTER));
8697                 if (!shost)
8698                         return -ENODEV;
8699                 ioc = shost_priv(shost);
8700                 memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
8701                 ioc->hba_mpi_version_belonged = hba_mpi_version;
8702                 ioc->id = mpt2_ids++;
8703                 sprintf(ioc->driver_name, "%s", MPT2SAS_DRIVER_NAME);
8704                 if (pdev->device == MPI2_MFGPAGE_DEVID_SSS6200) {
8705                         ioc->is_warpdrive = 1;
8706                         ioc->hide_ir_msg = 1;
8707                 } else
8708                         ioc->mfg_pg10_hide_flag = MFG_PAGE10_EXPOSE_ALL_DISKS;
8709                 break;
8710         case MPI25_VERSION:
8711         case MPI26_VERSION:
8712                 /* Use mpt3sas driver host template for SAS 3.0 HBA's */
8713                 shost = scsi_host_alloc(&mpt3sas_driver_template,
8714                   sizeof(struct MPT3SAS_ADAPTER));
8715                 if (!shost)
8716                         return -ENODEV;
8717                 ioc = shost_priv(shost);
8718                 memset(ioc, 0, sizeof(struct MPT3SAS_ADAPTER));
8719                 ioc->hba_mpi_version_belonged = hba_mpi_version;
8720                 ioc->id = mpt3_ids++;
8721                 sprintf(ioc->driver_name, "%s", MPT3SAS_DRIVER_NAME);
8722                 if ((ioc->hba_mpi_version_belonged == MPI25_VERSION &&
8723                         pdev->revision >= SAS3_PCI_DEVICE_C0_REVISION) ||
8724                         (ioc->hba_mpi_version_belonged == MPI26_VERSION))
8725                         ioc->msix96_vector = 1;
8726                 break;
8727         default:
8728                 return -ENODEV;
8729         }
8730
8731         INIT_LIST_HEAD(&ioc->list);
8732         spin_lock(&gioc_lock);
8733         list_add_tail(&ioc->list, &mpt3sas_ioc_list);
8734         spin_unlock(&gioc_lock);
8735         ioc->shost = shost;
8736         ioc->pdev = pdev;
8737         ioc->scsi_io_cb_idx = scsi_io_cb_idx;
8738         ioc->tm_cb_idx = tm_cb_idx;
8739         ioc->ctl_cb_idx = ctl_cb_idx;
8740         ioc->base_cb_idx = base_cb_idx;
8741         ioc->port_enable_cb_idx = port_enable_cb_idx;
8742         ioc->transport_cb_idx = transport_cb_idx;
8743         ioc->scsih_cb_idx = scsih_cb_idx;
8744         ioc->config_cb_idx = config_cb_idx;
8745         ioc->tm_tr_cb_idx = tm_tr_cb_idx;
8746         ioc->tm_tr_volume_cb_idx = tm_tr_volume_cb_idx;
8747         ioc->tm_sas_control_cb_idx = tm_sas_control_cb_idx;
8748         ioc->logging_level = logging_level;
8749         ioc->schedule_dead_ioc_flush_running_cmds = &_scsih_flush_running_cmds;
8750         /* misc semaphores and spin locks */
8751         mutex_init(&ioc->reset_in_progress_mutex);
8752         /* initializing pci_access_mutex lock */
8753         mutex_init(&ioc->pci_access_mutex);
8754         spin_lock_init(&ioc->ioc_reset_in_progress_lock);
8755         spin_lock_init(&ioc->scsi_lookup_lock);
8756         spin_lock_init(&ioc->sas_device_lock);
8757         spin_lock_init(&ioc->sas_node_lock);
8758         spin_lock_init(&ioc->fw_event_lock);
8759         spin_lock_init(&ioc->raid_device_lock);
8760         spin_lock_init(&ioc->diag_trigger_lock);
8761
8762         INIT_LIST_HEAD(&ioc->sas_device_list);
8763         INIT_LIST_HEAD(&ioc->sas_device_init_list);
8764         INIT_LIST_HEAD(&ioc->sas_expander_list);
8765         INIT_LIST_HEAD(&ioc->fw_event_list);
8766         INIT_LIST_HEAD(&ioc->raid_device_list);
8767         INIT_LIST_HEAD(&ioc->sas_hba.sas_port_list);
8768         INIT_LIST_HEAD(&ioc->delayed_tr_list);
8769         INIT_LIST_HEAD(&ioc->delayed_sc_list);
8770         INIT_LIST_HEAD(&ioc->delayed_event_ack_list);
8771         INIT_LIST_HEAD(&ioc->delayed_tr_volume_list);
8772         INIT_LIST_HEAD(&ioc->reply_queue_list);
8773
8774         sprintf(ioc->name, "%s_cm%d", ioc->driver_name, ioc->id);
8775
8776         /* init shost parameters */
8777         shost->max_cmd_len = 32;
8778         shost->max_lun = max_lun;
8779         shost->transportt = mpt3sas_transport_template;
8780         shost->unique_id = ioc->id;
8781
8782         if (max_sectors != 0xFFFF) {
8783                 if (max_sectors < 64) {
8784                         shost->max_sectors = 64;
8785                         pr_warn(MPT3SAS_FMT "Invalid value %d passed " \
8786                             "for max_sectors, range is 64 to 32767. Assigning "
8787                             "value of 64.\n", ioc->name, max_sectors);
8788                 } else if (max_sectors > 32767) {
8789                         shost->max_sectors = 32767;
8790                         pr_warn(MPT3SAS_FMT "Invalid value %d passed " \
8791                             "for max_sectors, range is 64 to 32767. Assigning "
8792                             "default value of 32767.\n", ioc->name,
8793                             max_sectors);
8794                 } else {
8795                         shost->max_sectors = max_sectors & 0xFFFE;
8796                         pr_info(MPT3SAS_FMT
8797                                 "The max_sectors value is set to %d\n",
8798                                 ioc->name, shost->max_sectors);
8799                 }
8800         }
8801
8802         /* register EEDP capabilities with SCSI layer */
8803         if (prot_mask > 0)
8804                 scsi_host_set_prot(shost, prot_mask);
8805         else
8806                 scsi_host_set_prot(shost, SHOST_DIF_TYPE1_PROTECTION
8807                                    | SHOST_DIF_TYPE2_PROTECTION
8808                                    | SHOST_DIF_TYPE3_PROTECTION);
8809
8810         scsi_host_set_guard(shost, SHOST_DIX_GUARD_CRC);
8811
8812         /* event thread */
8813         snprintf(ioc->firmware_event_name, sizeof(ioc->firmware_event_name),
8814             "fw_event_%s%d", ioc->driver_name, ioc->id);
8815         ioc->firmware_event_thread = alloc_ordered_workqueue(
8816             ioc->firmware_event_name, WQ_MEM_RECLAIM);
8817         if (!ioc->firmware_event_thread) {
8818                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
8819                     ioc->name, __FILE__, __LINE__, __func__);
8820                 rv = -ENODEV;
8821                 goto out_thread_fail;
8822         }
8823
8824         ioc->is_driver_loading = 1;
8825         if ((mpt3sas_base_attach(ioc))) {
8826                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
8827                     ioc->name, __FILE__, __LINE__, __func__);
8828                 rv = -ENODEV;
8829                 goto out_attach_fail;
8830         }
8831
8832         if (ioc->is_warpdrive) {
8833                 if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_EXPOSE_ALL_DISKS)
8834                         ioc->hide_drives = 0;
8835                 else if (ioc->mfg_pg10_hide_flag ==  MFG_PAGE10_HIDE_ALL_DISKS)
8836                         ioc->hide_drives = 1;
8837                 else {
8838                         if (mpt3sas_get_num_volumes(ioc))
8839                                 ioc->hide_drives = 1;
8840                         else
8841                                 ioc->hide_drives = 0;
8842                 }
8843         } else
8844                 ioc->hide_drives = 0;
8845
8846         rv = scsi_add_host(shost, &pdev->dev);
8847         if (rv) {
8848                 pr_err(MPT3SAS_FMT "failure at %s:%d/%s()!\n",
8849                     ioc->name, __FILE__, __LINE__, __func__);
8850                 goto out_add_shost_fail;
8851         }
8852
8853         scsi_scan_host(shost);
8854         return 0;
8855 out_add_shost_fail:
8856         mpt3sas_base_detach(ioc);
8857  out_attach_fail:
8858         destroy_workqueue(ioc->firmware_event_thread);
8859  out_thread_fail:
8860         spin_lock(&gioc_lock);
8861         list_del(&ioc->list);
8862         spin_unlock(&gioc_lock);
8863         scsi_host_put(shost);
8864         return rv;
8865 }
8866
8867 #ifdef CONFIG_PM
8868 /**
8869  * scsih_suspend - power management suspend main entry point
8870  * @pdev: PCI device struct
8871  * @state: PM state change to (usually PCI_D3)
8872  *
8873  * Returns 0 success, anything else error.
8874  */
8875 static int
8876 scsih_suspend(struct pci_dev *pdev, pm_message_t state)
8877 {
8878         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8879         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
8880         pci_power_t device_state;
8881
8882         mpt3sas_base_stop_watchdog(ioc);
8883         flush_scheduled_work();
8884         scsi_block_requests(shost);
8885         device_state = pci_choose_state(pdev, state);
8886         pr_info(MPT3SAS_FMT
8887                 "pdev=0x%p, slot=%s, entering operating state [D%d]\n",
8888                 ioc->name, pdev, pci_name(pdev), device_state);
8889
8890         pci_save_state(pdev);
8891         mpt3sas_base_free_resources(ioc);
8892         pci_set_power_state(pdev, device_state);
8893         return 0;
8894 }
8895
8896 /**
8897  * scsih_resume - power management resume main entry point
8898  * @pdev: PCI device struct
8899  *
8900  * Returns 0 success, anything else error.
8901  */
8902 static int
8903 scsih_resume(struct pci_dev *pdev)
8904 {
8905         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8906         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
8907         pci_power_t device_state = pdev->current_state;
8908         int r;
8909
8910         pr_info(MPT3SAS_FMT
8911                 "pdev=0x%p, slot=%s, previous operating state [D%d]\n",
8912                 ioc->name, pdev, pci_name(pdev), device_state);
8913
8914         pci_set_power_state(pdev, PCI_D0);
8915         pci_enable_wake(pdev, PCI_D0, 0);
8916         pci_restore_state(pdev);
8917         ioc->pdev = pdev;
8918         r = mpt3sas_base_map_resources(ioc);
8919         if (r)
8920                 return r;
8921
8922         mpt3sas_base_hard_reset_handler(ioc, SOFT_RESET);
8923         scsi_unblock_requests(shost);
8924         mpt3sas_base_start_watchdog(ioc);
8925         return 0;
8926 }
8927 #endif /* CONFIG_PM */
8928
8929 /**
8930  * scsih_pci_error_detected - Called when a PCI error is detected.
8931  * @pdev: PCI device struct
8932  * @state: PCI channel state
8933  *
8934  * Description: Called when a PCI error is detected.
8935  *
8936  * Return value:
8937  *      PCI_ERS_RESULT_NEED_RESET or PCI_ERS_RESULT_DISCONNECT
8938  */
8939 static pci_ers_result_t
8940 scsih_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
8941 {
8942         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8943         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
8944
8945         pr_info(MPT3SAS_FMT "PCI error: detected callback, state(%d)!!\n",
8946             ioc->name, state);
8947
8948         switch (state) {
8949         case pci_channel_io_normal:
8950                 return PCI_ERS_RESULT_CAN_RECOVER;
8951         case pci_channel_io_frozen:
8952                 /* Fatal error, prepare for slot reset */
8953                 ioc->pci_error_recovery = 1;
8954                 scsi_block_requests(ioc->shost);
8955                 mpt3sas_base_stop_watchdog(ioc);
8956                 mpt3sas_base_free_resources(ioc);
8957                 return PCI_ERS_RESULT_NEED_RESET;
8958         case pci_channel_io_perm_failure:
8959                 /* Permanent error, prepare for device removal */
8960                 ioc->pci_error_recovery = 1;
8961                 mpt3sas_base_stop_watchdog(ioc);
8962                 _scsih_flush_running_cmds(ioc);
8963                 return PCI_ERS_RESULT_DISCONNECT;
8964         }
8965         return PCI_ERS_RESULT_NEED_RESET;
8966 }
8967
8968 /**
8969  * scsih_pci_slot_reset - Called when PCI slot has been reset.
8970  * @pdev: PCI device struct
8971  *
8972  * Description: This routine is called by the pci error recovery
8973  * code after the PCI slot has been reset, just before we
8974  * should resume normal operations.
8975  */
8976 static pci_ers_result_t
8977 scsih_pci_slot_reset(struct pci_dev *pdev)
8978 {
8979         struct Scsi_Host *shost = pci_get_drvdata(pdev);
8980         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
8981         int rc;
8982
8983         pr_info(MPT3SAS_FMT "PCI error: slot reset callback!!\n",
8984              ioc->name);
8985
8986         ioc->pci_error_recovery = 0;
8987         ioc->pdev = pdev;
8988         pci_restore_state(pdev);
8989         rc = mpt3sas_base_map_resources(ioc);
8990         if (rc)
8991                 return PCI_ERS_RESULT_DISCONNECT;
8992
8993         rc = mpt3sas_base_hard_reset_handler(ioc, FORCE_BIG_HAMMER);
8994
8995         pr_warn(MPT3SAS_FMT "hard reset: %s\n", ioc->name,
8996             (rc == 0) ? "success" : "failed");
8997
8998         if (!rc)
8999                 return PCI_ERS_RESULT_RECOVERED;
9000         else
9001                 return PCI_ERS_RESULT_DISCONNECT;
9002 }
9003
9004 /**
9005  * scsih_pci_resume() - resume normal ops after PCI reset
9006  * @pdev: pointer to PCI device
9007  *
9008  * Called when the error recovery driver tells us that its
9009  * OK to resume normal operation. Use completion to allow
9010  * halted scsi ops to resume.
9011  */
9012 static void
9013 scsih_pci_resume(struct pci_dev *pdev)
9014 {
9015         struct Scsi_Host *shost = pci_get_drvdata(pdev);
9016         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
9017
9018         pr_info(MPT3SAS_FMT "PCI error: resume callback!!\n", ioc->name);
9019
9020         pci_cleanup_aer_uncorrect_error_status(pdev);
9021         mpt3sas_base_start_watchdog(ioc);
9022         scsi_unblock_requests(ioc->shost);
9023 }
9024
9025 /**
9026  * scsih_pci_mmio_enabled - Enable MMIO and dump debug registers
9027  * @pdev: pointer to PCI device
9028  */
9029 static pci_ers_result_t
9030 scsih_pci_mmio_enabled(struct pci_dev *pdev)
9031 {
9032         struct Scsi_Host *shost = pci_get_drvdata(pdev);
9033         struct MPT3SAS_ADAPTER *ioc = shost_priv(shost);
9034
9035         pr_info(MPT3SAS_FMT "PCI error: mmio enabled callback!!\n",
9036             ioc->name);
9037
9038         /* TODO - dump whatever for debugging purposes */
9039
9040         /* This called only if scsih_pci_error_detected returns
9041          * PCI_ERS_RESULT_CAN_RECOVER. Read/write to the device still
9042          * works, no need to reset slot.
9043          */
9044         return PCI_ERS_RESULT_RECOVERED;
9045 }
9046
9047 /*
9048  * The pci device ids are defined in mpi/mpi2_cnfg.h.
9049  */
9050 static const struct pci_device_id mpt3sas_pci_table[] = {
9051         /* Spitfire ~ 2004 */
9052         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2004,
9053                 PCI_ANY_ID, PCI_ANY_ID },
9054         /* Falcon ~ 2008 */
9055         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2008,
9056                 PCI_ANY_ID, PCI_ANY_ID },
9057         /* Liberator ~ 2108 */
9058         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_1,
9059                 PCI_ANY_ID, PCI_ANY_ID },
9060         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_2,
9061                 PCI_ANY_ID, PCI_ANY_ID },
9062         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2108_3,
9063                 PCI_ANY_ID, PCI_ANY_ID },
9064         /* Meteor ~ 2116 */
9065         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_1,
9066                 PCI_ANY_ID, PCI_ANY_ID },
9067         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2116_2,
9068                 PCI_ANY_ID, PCI_ANY_ID },
9069         /* Thunderbolt ~ 2208 */
9070         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_1,
9071                 PCI_ANY_ID, PCI_ANY_ID },
9072         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_2,
9073                 PCI_ANY_ID, PCI_ANY_ID },
9074         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_3,
9075                 PCI_ANY_ID, PCI_ANY_ID },
9076         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_4,
9077                 PCI_ANY_ID, PCI_ANY_ID },
9078         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_5,
9079                 PCI_ANY_ID, PCI_ANY_ID },
9080         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2208_6,
9081                 PCI_ANY_ID, PCI_ANY_ID },
9082         /* Mustang ~ 2308 */
9083         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_1,
9084                 PCI_ANY_ID, PCI_ANY_ID },
9085         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_2,
9086                 PCI_ANY_ID, PCI_ANY_ID },
9087         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SAS2308_3,
9088                 PCI_ANY_ID, PCI_ANY_ID },
9089         /* SSS6200 */
9090         { MPI2_MFGPAGE_VENDORID_LSI, MPI2_MFGPAGE_DEVID_SSS6200,
9091                 PCI_ANY_ID, PCI_ANY_ID },
9092         /* Fury ~ 3004 and 3008 */
9093         { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3004,
9094                 PCI_ANY_ID, PCI_ANY_ID },
9095         { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3008,
9096                 PCI_ANY_ID, PCI_ANY_ID },
9097         /* Invader ~ 3108 */
9098         { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_1,
9099                 PCI_ANY_ID, PCI_ANY_ID },
9100         { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_2,
9101                 PCI_ANY_ID, PCI_ANY_ID },
9102         { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_5,
9103                 PCI_ANY_ID, PCI_ANY_ID },
9104         { MPI2_MFGPAGE_VENDORID_LSI, MPI25_MFGPAGE_DEVID_SAS3108_6,
9105                 PCI_ANY_ID, PCI_ANY_ID },
9106         /* Cutlass ~ 3216 and 3224 */
9107         { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3216,
9108                 PCI_ANY_ID, PCI_ANY_ID },
9109         { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3224,
9110                 PCI_ANY_ID, PCI_ANY_ID },
9111         /* Intruder ~ 3316 and 3324 */
9112         { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_1,
9113                 PCI_ANY_ID, PCI_ANY_ID },
9114         { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_2,
9115                 PCI_ANY_ID, PCI_ANY_ID },
9116         { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_3,
9117                 PCI_ANY_ID, PCI_ANY_ID },
9118         { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3316_4,
9119                 PCI_ANY_ID, PCI_ANY_ID },
9120         { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_1,
9121                 PCI_ANY_ID, PCI_ANY_ID },
9122         { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_2,
9123                 PCI_ANY_ID, PCI_ANY_ID },
9124         { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_3,
9125                 PCI_ANY_ID, PCI_ANY_ID },
9126         { MPI2_MFGPAGE_VENDORID_LSI, MPI26_MFGPAGE_DEVID_SAS3324_4,
9127                 PCI_ANY_ID, PCI_ANY_ID },
9128         {0}     /* Terminating entry */
9129 };
9130 MODULE_DEVICE_TABLE(pci, mpt3sas_pci_table);
9131
9132 static struct pci_error_handlers _mpt3sas_err_handler = {
9133         .error_detected = scsih_pci_error_detected,
9134         .mmio_enabled   = scsih_pci_mmio_enabled,
9135         .slot_reset     = scsih_pci_slot_reset,
9136         .resume         = scsih_pci_resume,
9137 };
9138
9139 static struct pci_driver mpt3sas_driver = {
9140         .name           = MPT3SAS_DRIVER_NAME,
9141         .id_table       = mpt3sas_pci_table,
9142         .probe          = _scsih_probe,
9143         .remove         = scsih_remove,
9144         .shutdown       = scsih_shutdown,
9145         .err_handler    = &_mpt3sas_err_handler,
9146 #ifdef CONFIG_PM
9147         .suspend        = scsih_suspend,
9148         .resume         = scsih_resume,
9149 #endif
9150 };
9151
9152 /**
9153  * scsih_init - main entry point for this driver.
9154  *
9155  * Returns 0 success, anything else error.
9156  */
9157 static int
9158 scsih_init(void)
9159 {
9160         mpt2_ids = 0;
9161         mpt3_ids = 0;
9162
9163         mpt3sas_base_initialize_callback_handler();
9164
9165          /* queuecommand callback hander */
9166         scsi_io_cb_idx = mpt3sas_base_register_callback_handler(_scsih_io_done);
9167
9168         /* task managment callback handler */
9169         tm_cb_idx = mpt3sas_base_register_callback_handler(_scsih_tm_done);
9170
9171         /* base internal commands callback handler */
9172         base_cb_idx = mpt3sas_base_register_callback_handler(mpt3sas_base_done);
9173         port_enable_cb_idx = mpt3sas_base_register_callback_handler(
9174             mpt3sas_port_enable_done);
9175
9176         /* transport internal commands callback handler */
9177         transport_cb_idx = mpt3sas_base_register_callback_handler(
9178             mpt3sas_transport_done);
9179
9180         /* scsih internal commands callback handler */
9181         scsih_cb_idx = mpt3sas_base_register_callback_handler(_scsih_done);
9182
9183         /* configuration page API internal commands callback handler */
9184         config_cb_idx = mpt3sas_base_register_callback_handler(
9185             mpt3sas_config_done);
9186
9187         /* ctl module callback handler */
9188         ctl_cb_idx = mpt3sas_base_register_callback_handler(mpt3sas_ctl_done);
9189
9190         tm_tr_cb_idx = mpt3sas_base_register_callback_handler(
9191             _scsih_tm_tr_complete);
9192
9193         tm_tr_volume_cb_idx = mpt3sas_base_register_callback_handler(
9194             _scsih_tm_volume_tr_complete);
9195
9196         tm_sas_control_cb_idx = mpt3sas_base_register_callback_handler(
9197             _scsih_sas_control_complete);
9198
9199         return 0;
9200 }
9201
9202 /**
9203  * scsih_exit - exit point for this driver (when it is a module).
9204  *
9205  * Returns 0 success, anything else error.
9206  */
9207 static void
9208 scsih_exit(void)
9209 {
9210
9211         mpt3sas_base_release_callback_handler(scsi_io_cb_idx);
9212         mpt3sas_base_release_callback_handler(tm_cb_idx);
9213         mpt3sas_base_release_callback_handler(base_cb_idx);
9214         mpt3sas_base_release_callback_handler(port_enable_cb_idx);
9215         mpt3sas_base_release_callback_handler(transport_cb_idx);
9216         mpt3sas_base_release_callback_handler(scsih_cb_idx);
9217         mpt3sas_base_release_callback_handler(config_cb_idx);
9218         mpt3sas_base_release_callback_handler(ctl_cb_idx);
9219
9220         mpt3sas_base_release_callback_handler(tm_tr_cb_idx);
9221         mpt3sas_base_release_callback_handler(tm_tr_volume_cb_idx);
9222         mpt3sas_base_release_callback_handler(tm_sas_control_cb_idx);
9223
9224 /* raid transport support */
9225         if (hbas_to_enumerate != 1)
9226                 raid_class_release(mpt3sas_raid_template);
9227         if (hbas_to_enumerate != 2)
9228                 raid_class_release(mpt2sas_raid_template);
9229         sas_release_transport(mpt3sas_transport_template);
9230 }
9231
9232 /**
9233  * _mpt3sas_init - main entry point for this driver.
9234  *
9235  * Returns 0 success, anything else error.
9236  */
9237 static int __init
9238 _mpt3sas_init(void)
9239 {
9240         int error;
9241
9242         pr_info("%s version %s loaded\n", MPT3SAS_DRIVER_NAME,
9243                                         MPT3SAS_DRIVER_VERSION);
9244
9245         mpt3sas_transport_template =
9246             sas_attach_transport(&mpt3sas_transport_functions);
9247         if (!mpt3sas_transport_template)
9248                 return -ENODEV;
9249
9250         /* No need attach mpt3sas raid functions template
9251          * if hbas_to_enumarate value is one.
9252          */
9253         if (hbas_to_enumerate != 1) {
9254                 mpt3sas_raid_template =
9255                                 raid_class_attach(&mpt3sas_raid_functions);
9256                 if (!mpt3sas_raid_template) {
9257                         sas_release_transport(mpt3sas_transport_template);
9258                         return -ENODEV;
9259                 }
9260         }
9261
9262         /* No need to attach mpt2sas raid functions template
9263          * if hbas_to_enumarate value is two
9264          */
9265         if (hbas_to_enumerate != 2) {
9266                 mpt2sas_raid_template =
9267                                 raid_class_attach(&mpt2sas_raid_functions);
9268                 if (!mpt2sas_raid_template) {
9269                         sas_release_transport(mpt3sas_transport_template);
9270                         return -ENODEV;
9271                 }
9272         }
9273
9274         error = scsih_init();
9275         if (error) {
9276                 scsih_exit();
9277                 return error;
9278         }
9279
9280         mpt3sas_ctl_init(hbas_to_enumerate);
9281
9282         error = pci_register_driver(&mpt3sas_driver);
9283         if (error)
9284                 scsih_exit();
9285
9286         return error;
9287 }
9288
9289 /**
9290  * _mpt3sas_exit - exit point for this driver (when it is a module).
9291  *
9292  */
9293 static void __exit
9294 _mpt3sas_exit(void)
9295 {
9296         pr_info("mpt3sas version %s unloading\n",
9297                                 MPT3SAS_DRIVER_VERSION);
9298
9299         pci_unregister_driver(&mpt3sas_driver);
9300
9301         mpt3sas_ctl_exit(hbas_to_enumerate);
9302
9303         scsih_exit();
9304 }
9305
9306 module_init(_mpt3sas_init);
9307 module_exit(_mpt3sas_exit);