drivers/spi/spi.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  * SPI init/core code
   4  *
   5  * Copyright (C) 2005 David Brownell
   6  * Copyright (C) 2008 Secret Lab Technologies Ltd.
   7  */
   8
   9 #include <linux/kernel.h>
  10 #include <linux/device.h>
  11 #include <linux/init.h>
  12 #include <linux/cache.h>
  13 #include <linux/dma-mapping.h>
  14 #include <linux/dmaengine.h>
  15 #include <linux/mutex.h>
  16 #include <linux/of_device.h>
  17 #include <linux/of_irq.h>
  18 #include <linux/clk/clk-conf.h>
  19 #include <linux/slab.h>
  20 #include <linux/mod_devicetable.h>
  21 #include <linux/spi/spi.h>
  22 #include <linux/spi/spi-mem.h>
  23 #include <linux/of_gpio.h>
  24 #include <linux/pm_runtime.h>
  25 #include <linux/pm_domain.h>
  26 #include <linux/property.h>
  27 #include <linux/export.h>
  28 #include <linux/sched/rt.h>
  29 #include <uapi/linux/sched/types.h>
  30 #include <linux/delay.h>
  31 #include <linux/kthread.h>
  32 #include <linux/ioport.h>
  33 #include <linux/acpi.h>
  34 #include <linux/highmem.h>
  35 #include <linux/idr.h>
  36 #include <linux/platform_data/x86/apple.h>
  37
  38 #define CREATE_TRACE_POINTS
  39 #include <trace/events/spi.h>
  40
  41 #include "internals.h"
  42
  43 static DEFINE_IDR(spi_master_idr);
  44
  45 static void spidev_release(struct device *dev)
  46 {
  47         struct spi_device       *spi = to_spi_device(dev);
  48
  49         /* spi controllers may cleanup for released devices */
  50         if (spi->controller->cleanup)
  51                 spi->controller->cleanup(spi);
  52
  53         spi_controller_put(spi->controller);
  54         kfree(spi->driver_override);
  55         kfree(spi);
  56 }
  57
  58 static ssize_t
  59 modalias_show(struct device *dev, struct device_attribute *a, char *buf)
  60 {
  61         const struct spi_device *spi = to_spi_device(dev);
  62         int len;
  63
  64         len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
  65         if (len != -ENODEV)
  66                 return len;
  67
  68         return sprintf(buf, "%s%s\n", SPI_MODULE_PREFIX, spi->modalias);
  69 }
  70 static DEVICE_ATTR_RO(modalias);
  71
  72 static ssize_t driver_override_store(struct device *dev,
  73                                      struct device_attribute *a,
  74                                      const char *buf, size_t count)
  75 {
  76         struct spi_device *spi = to_spi_device(dev);
  77         const char *end = memchr(buf, '\n', count);
  78         const size_t len = end ? end - buf : count;
  79         const char *driver_override, *old;
  80
  81         /* We need to keep extra room for a newline when displaying value */
  82         if (len >= (PAGE_SIZE - 1))
  83                 return -EINVAL;
  84
  85         driver_override = kstrndup(buf, len, GFP_KERNEL);
  86         if (!driver_override)
  87                 return -ENOMEM;
  88
  89         device_lock(dev);
  90         old = spi->driver_override;
  91         if (len) {
  92                 spi->driver_override = driver_override;
  93         } else {
  94                 /* Emptry string, disable driver override */
  95                 spi->driver_override = NULL;
  96                 kfree(driver_override);
  97         }
  98         device_unlock(dev);
  99         kfree(old);
 100
 101         return count;
 102 }
 103
 104 static ssize_t driver_override_show(struct device *dev,
 105                                     struct device_attribute *a, char *buf)
 106 {
 107         const struct spi_device *spi = to_spi_device(dev);
 108         ssize_t len;
 109
 110         device_lock(dev);
 111         len = snprintf(buf, PAGE_SIZE, "%s\n", spi->driver_override ? : "");
 112         device_unlock(dev);
 113         return len;
 114 }
 115 static DEVICE_ATTR_RW(driver_override);
 116
 117 #define SPI_STATISTICS_ATTRS(field, file)                               \
 118 static ssize_t spi_controller_##field##_show(struct device *dev,        \
 119                                              struct device_attribute *attr, \
 120                                              char *buf)                 \
 121 {                                                                       \
 122         struct spi_controller *ctlr = container_of(dev,                 \
 123                                          struct spi_controller, dev);   \
 124         return spi_statistics_##field##_show(&ctlr->statistics, buf);   \
 125 }                                                                       \
 126 static struct device_attribute dev_attr_spi_controller_##field = {      \
 127         .attr = { .name = file, .mode = 0444 },                         \
 128         .show = spi_controller_##field##_show,                          \
 129 };                                                                      \
 130 static ssize_t spi_device_##field##_show(struct device *dev,            \
 131                                          struct device_attribute *attr, \
 132                                         char *buf)                      \
 133 {                                                                       \
 134         struct spi_device *spi = to_spi_device(dev);                    \
 135         return spi_statistics_##field##_show(&spi->statistics, buf);    \
 136 }                                                                       \
 137 static struct device_attribute dev_attr_spi_device_##field = {          \
 138         .attr = { .name = file, .mode = 0444 },                         \
 139         .show = spi_device_##field##_show,                              \
 140 }
 141
 142 #define SPI_STATISTICS_SHOW_NAME(name, file, field, format_string)      \
 143 static ssize_t spi_statistics_##name##_show(struct spi_statistics *stat, \
 144                                             char *buf)                  \
 145 {                                                                       \
 146         unsigned long flags;                                            \
 147         ssize_t len;                                                    \
 148         spin_lock_irqsave(&stat->lock, flags);                          \
 149         len = sprintf(buf, format_string, stat->field);                 \
 150         spin_unlock_irqrestore(&stat->lock, flags);                     \
 151         return len;                                                     \
 152 }                                                                       \
 153 SPI_STATISTICS_ATTRS(name, file)
 154
 155 #define SPI_STATISTICS_SHOW(field, format_string)                       \
 156         SPI_STATISTICS_SHOW_NAME(field, __stringify(field),             \
 157                                  field, format_string)
 158
 159 SPI_STATISTICS_SHOW(messages, "%lu");
 160 SPI_STATISTICS_SHOW(transfers, "%lu");
 161 SPI_STATISTICS_SHOW(errors, "%lu");
 162 SPI_STATISTICS_SHOW(timedout, "%lu");
 163
 164 SPI_STATISTICS_SHOW(spi_sync, "%lu");
 165 SPI_STATISTICS_SHOW(spi_sync_immediate, "%lu");
 166 SPI_STATISTICS_SHOW(spi_async, "%lu");
 167
 168 SPI_STATISTICS_SHOW(bytes, "%llu");
 169 SPI_STATISTICS_SHOW(bytes_rx, "%llu");
 170 SPI_STATISTICS_SHOW(bytes_tx, "%llu");
 171
 172 #define SPI_STATISTICS_TRANSFER_BYTES_HISTO(index, number)              \
 173         SPI_STATISTICS_SHOW_NAME(transfer_bytes_histo##index,           \
 174                                  "transfer_bytes_histo_" number,        \
 175                                  transfer_bytes_histo[index],  "%lu")
 176 SPI_STATISTICS_TRANSFER_BYTES_HISTO(0,  "0-1");
 177 SPI_STATISTICS_TRANSFER_BYTES_HISTO(1,  "2-3");
 178 SPI_STATISTICS_TRANSFER_BYTES_HISTO(2,  "4-7");
 179 SPI_STATISTICS_TRANSFER_BYTES_HISTO(3,  "8-15");
 180 SPI_STATISTICS_TRANSFER_BYTES_HISTO(4,  "16-31");
 181 SPI_STATISTICS_TRANSFER_BYTES_HISTO(5,  "32-63");
 182 SPI_STATISTICS_TRANSFER_BYTES_HISTO(6,  "64-127");
 183 SPI_STATISTICS_TRANSFER_BYTES_HISTO(7,  "128-255");
 184 SPI_STATISTICS_TRANSFER_BYTES_HISTO(8,  "256-511");
 185 SPI_STATISTICS_TRANSFER_BYTES_HISTO(9,  "512-1023");
 186 SPI_STATISTICS_TRANSFER_BYTES_HISTO(10, "1024-2047");
 187 SPI_STATISTICS_TRANSFER_BYTES_HISTO(11, "2048-4095");
 188 SPI_STATISTICS_TRANSFER_BYTES_HISTO(12, "4096-8191");
 189 SPI_STATISTICS_TRANSFER_BYTES_HISTO(13, "8192-16383");
 190 SPI_STATISTICS_TRANSFER_BYTES_HISTO(14, "16384-32767");
 191 SPI_STATISTICS_TRANSFER_BYTES_HISTO(15, "32768-65535");
 192 SPI_STATISTICS_TRANSFER_BYTES_HISTO(16, "65536+");
 193
 194 SPI_STATISTICS_SHOW(transfers_split_maxsize, "%lu");
 195
 196 static struct attribute *spi_dev_attrs[] = {
 197         &dev_attr_modalias.attr,
 198         &dev_attr_driver_override.attr,
 199         NULL,
 200 };
 201
 202 static const struct attribute_group spi_dev_group = {
 203         .attrs  = spi_dev_attrs,
 204 };
 205
 206 static struct attribute *spi_device_statistics_attrs[] = {
 207         &dev_attr_spi_device_messages.attr,
 208         &dev_attr_spi_device_transfers.attr,
 209         &dev_attr_spi_device_errors.attr,
 210         &dev_attr_spi_device_timedout.attr,
 211         &dev_attr_spi_device_spi_sync.attr,
 212         &dev_attr_spi_device_spi_sync_immediate.attr,
 213         &dev_attr_spi_device_spi_async.attr,
 214         &dev_attr_spi_device_bytes.attr,
 215         &dev_attr_spi_device_bytes_rx.attr,
 216         &dev_attr_spi_device_bytes_tx.attr,
 217         &dev_attr_spi_device_transfer_bytes_histo0.attr,
 218         &dev_attr_spi_device_transfer_bytes_histo1.attr,
 219         &dev_attr_spi_device_transfer_bytes_histo2.attr,
 220         &dev_attr_spi_device_transfer_bytes_histo3.attr,
 221         &dev_attr_spi_device_transfer_bytes_histo4.attr,
 222         &dev_attr_spi_device_transfer_bytes_histo5.attr,
 223         &dev_attr_spi_device_transfer_bytes_histo6.attr,
 224         &dev_attr_spi_device_transfer_bytes_histo7.attr,
 225         &dev_attr_spi_device_transfer_bytes_histo8.attr,
 226         &dev_attr_spi_device_transfer_bytes_histo9.attr,
 227         &dev_attr_spi_device_transfer_bytes_histo10.attr,
 228         &dev_attr_spi_device_transfer_bytes_histo11.attr,
 229         &dev_attr_spi_device_transfer_bytes_histo12.attr,
 230         &dev_attr_spi_device_transfer_bytes_histo13.attr,
 231         &dev_attr_spi_device_transfer_bytes_histo14.attr,
 232         &dev_attr_spi_device_transfer_bytes_histo15.attr,
 233         &dev_attr_spi_device_transfer_bytes_histo16.attr,
 234         &dev_attr_spi_device_transfers_split_maxsize.attr,
 235         NULL,
 236 };
 237
 238 static const struct attribute_group spi_device_statistics_group = {
 239         .name  = "statistics",
 240         .attrs  = spi_device_statistics_attrs,
 241 };
 242
 243 static const struct attribute_group *spi_dev_groups[] = {
 244         &spi_dev_group,
 245         &spi_device_statistics_group,
 246         NULL,
 247 };
 248
 249 static struct attribute *spi_controller_statistics_attrs[] = {
 250         &dev_attr_spi_controller_messages.attr,
 251         &dev_attr_spi_controller_transfers.attr,
 252         &dev_attr_spi_controller_errors.attr,
 253         &dev_attr_spi_controller_timedout.attr,
 254         &dev_attr_spi_controller_spi_sync.attr,
 255         &dev_attr_spi_controller_spi_sync_immediate.attr,
 256         &dev_attr_spi_controller_spi_async.attr,
 257         &dev_attr_spi_controller_bytes.attr,
 258         &dev_attr_spi_controller_bytes_rx.attr,
 259         &dev_attr_spi_controller_bytes_tx.attr,
 260         &dev_attr_spi_controller_transfer_bytes_histo0.attr,
 261         &dev_attr_spi_controller_transfer_bytes_histo1.attr,
 262         &dev_attr_spi_controller_transfer_bytes_histo2.attr,
 263         &dev_attr_spi_controller_transfer_bytes_histo3.attr,
 264         &dev_attr_spi_controller_transfer_bytes_histo4.attr,
 265         &dev_attr_spi_controller_transfer_bytes_histo5.attr,
 266         &dev_attr_spi_controller_transfer_bytes_histo6.attr,
 267         &dev_attr_spi_controller_transfer_bytes_histo7.attr,
 268         &dev_attr_spi_controller_transfer_bytes_histo8.attr,
 269         &dev_attr_spi_controller_transfer_bytes_histo9.attr,
 270         &dev_attr_spi_controller_transfer_bytes_histo10.attr,
 271         &dev_attr_spi_controller_transfer_bytes_histo11.attr,
 272         &dev_attr_spi_controller_transfer_bytes_histo12.attr,
 273         &dev_attr_spi_controller_transfer_bytes_histo13.attr,
 274         &dev_attr_spi_controller_transfer_bytes_histo14.attr,
 275         &dev_attr_spi_controller_transfer_bytes_histo15.attr,
 276         &dev_attr_spi_controller_transfer_bytes_histo16.attr,
 277         &dev_attr_spi_controller_transfers_split_maxsize.attr,
 278         NULL,
 279 };
 280
 281 static const struct attribute_group spi_controller_statistics_group = {
 282         .name  = "statistics",
 283         .attrs  = spi_controller_statistics_attrs,
 284 };
 285
 286 static const struct attribute_group *spi_master_groups[] = {
 287         &spi_controller_statistics_group,
 288         NULL,
 289 };
 290
 291 void spi_statistics_add_transfer_stats(struct spi_statistics *stats,
 292                                        struct spi_transfer *xfer,
 293                                        struct spi_controller *ctlr)
 294 {
 295         unsigned long flags;
 296         int l2len = min(fls(xfer->len), SPI_STATISTICS_HISTO_SIZE) - 1;
 297
 298         if (l2len < 0)
 299                 l2len = 0;
 300
 301         spin_lock_irqsave(&stats->lock, flags);
 302
 303         stats->transfers++;
 304         stats->transfer_bytes_histo[l2len]++;
 305
 306         stats->bytes += xfer->len;
 307         if ((xfer->tx_buf) &&
 308             (xfer->tx_buf != ctlr->dummy_tx))
 309                 stats->bytes_tx += xfer->len;
 310         if ((xfer->rx_buf) &&
 311             (xfer->rx_buf != ctlr->dummy_rx))
 312                 stats->bytes_rx += xfer->len;
 313
 314         spin_unlock_irqrestore(&stats->lock, flags);
 315 }
 316 EXPORT_SYMBOL_GPL(spi_statistics_add_transfer_stats);
 317
 318 /* modalias support makes "modprobe $MODALIAS" new-style hotplug work,
 319  * and the sysfs version makes coldplug work too.
 320  */
 321
 322 static const struct spi_device_id *spi_match_id(const struct spi_device_id *id,
 323                                                 const struct spi_device *sdev)
 324 {
 325         while (id->name[0]) {
 326                 if (!strcmp(sdev->modalias, id->name))
 327                         return id;
 328                 id++;
 329         }
 330         return NULL;
 331 }
 332
 333 const struct spi_device_id *spi_get_device_id(const struct spi_device *sdev)
 334 {
 335         const struct spi_driver *sdrv = to_spi_driver(sdev->dev.driver);
 336
 337         return spi_match_id(sdrv->id_table, sdev);
 338 }
 339 EXPORT_SYMBOL_GPL(spi_get_device_id);
 340
 341 static int spi_match_device(struct device *dev, struct device_driver *drv)
 342 {
 343         const struct spi_device *spi = to_spi_device(dev);
 344         const struct spi_driver *sdrv = to_spi_driver(drv);
 345
 346         /* Check override first, and if set, only use the named driver */
 347         if (spi->driver_override)
 348                 return strcmp(spi->driver_override, drv->name) == 0;
 349
 350         /* Attempt an OF style match */
 351         if (of_driver_match_device(dev, drv))
 352                 return 1;
 353
 354         /* Then try ACPI */
 355         if (acpi_driver_match_device(dev, drv))
 356                 return 1;
 357
 358         if (sdrv->id_table)
 359                 return !!spi_match_id(sdrv->id_table, spi);
 360
 361         return strcmp(spi->modalias, drv->name) == 0;
 362 }
 363
 364 static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
 365 {
 366         const struct spi_device         *spi = to_spi_device(dev);
 367         int rc;
 368
 369         rc = acpi_device_uevent_modalias(dev, env);
 370         if (rc != -ENODEV)
 371                 return rc;
 372
 373         return add_uevent_var(env, "MODALIAS=%s%s", SPI_MODULE_PREFIX, spi->modalias);
 374 }
 375
 376 struct bus_type spi_bus_type = {
 377         .name           = "spi",
 378         .dev_groups     = spi_dev_groups,
 379         .match          = spi_match_device,
 380         .uevent         = spi_uevent,
 381 };
 382 EXPORT_SYMBOL_GPL(spi_bus_type);
 383
 384
 385 static int spi_drv_probe(struct device *dev)
 386 {
 387         const struct spi_driver         *sdrv = to_spi_driver(dev->driver);
 388         struct spi_device               *spi = to_spi_device(dev);
 389         int ret;
 390
 391         ret = of_clk_set_defaults(dev->of_node, false);
 392         if (ret)
 393                 return ret;
 394
 395         if (dev->of_node) {
 396                 spi->irq = of_irq_get(dev->of_node, 0);
 397                 if (spi->irq == -EPROBE_DEFER)
 398                         return -EPROBE_DEFER;
 399                 if (spi->irq < 0)
 400                         spi->irq = 0;
 401         }
 402
 403         ret = dev_pm_domain_attach(dev, true);
 404         if (ret)
 405                 return ret;
 406
 407         ret = sdrv->probe(spi);
 408         if (ret)
 409                 dev_pm_domain_detach(dev, true);
 410
 411         return ret;
 412 }
 413
 414 static int spi_drv_remove(struct device *dev)
 415 {
 416         const struct spi_driver         *sdrv = to_spi_driver(dev->driver);
 417         int ret;
 418
 419         ret = sdrv->remove(to_spi_device(dev));
 420         dev_pm_domain_detach(dev, true);
 421
 422         return ret;
 423 }
 424
 425 static void spi_drv_shutdown(struct device *dev)
 426 {
 427         const struct spi_driver         *sdrv = to_spi_driver(dev->driver);
 428
 429         sdrv->shutdown(to_spi_device(dev));
 430 }
 431
 432 /**
 433  * __spi_register_driver - register a SPI driver
 434  * @owner: owner module of the driver to register
 435  * @sdrv: the driver to register
 436  * Context: can sleep
 437  *
 438  * Return: zero on success, else a negative error code.
 439  */
 440 int __spi_register_driver(struct module *owner, struct spi_driver *sdrv)
 441 {
 442         sdrv->driver.owner = owner;
 443         sdrv->driver.bus = &spi_bus_type;
 444         if (sdrv->probe)
 445                 sdrv->driver.probe = spi_drv_probe;
 446         if (sdrv->remove)
 447                 sdrv->driver.remove = spi_drv_remove;
 448         if (sdrv->shutdown)
 449                 sdrv->driver.shutdown = spi_drv_shutdown;
 450         return driver_register(&sdrv->driver);
 451 }
 452 EXPORT_SYMBOL_GPL(__spi_register_driver);
 453
 454 /*-------------------------------------------------------------------------*/
 455
 456 /* SPI devices should normally not be created by SPI device drivers; that
 457  * would make them board-specific.  Similarly with SPI controller drivers.
 458  * Device registration normally goes into like arch/.../mach.../board-YYY.c
 459  * with other readonly (flashable) information about mainboard devices.
 460  */
 461
 462 struct boardinfo {
 463         struct list_head        list;
 464         struct spi_board_info   board_info;
 465 };
 466
 467 static LIST_HEAD(board_list);
 468 static LIST_HEAD(spi_controller_list);
 469
 470 /*
 471  * Used to protect add/del opertion for board_info list and
 472  * spi_controller list, and their matching process
 473  * also used to protect object of type struct idr
 474  */
 475 static DEFINE_MUTEX(board_lock);
 476
 477 /**
 478  * spi_alloc_device - Allocate a new SPI device
 479  * @ctlr: Controller to which device is connected
 480  * Context: can sleep
 481  *
 482  * Allows a driver to allocate and initialize a spi_device without
 483  * registering it immediately.  This allows a driver to directly
 484  * fill the spi_device with device parameters before calling
 485  * spi_add_device() on it.
 486  *
 487  * Caller is responsible to call spi_add_device() on the returned
 488  * spi_device structure to add it to the SPI controller.  If the caller
 489  * needs to discard the spi_device without adding it, then it should
 490  * call spi_dev_put() on it.
 491  *
 492  * Return: a pointer to the new device, or NULL.
 493  */
 494 struct spi_device *spi_alloc_device(struct spi_controller *ctlr)
 495 {
 496         struct spi_device       *spi;
 497
 498         if (!spi_controller_get(ctlr))
 499                 return NULL;
 500
 501         spi = kzalloc(sizeof(*spi), GFP_KERNEL);
 502         if (!spi) {
 503                 spi_controller_put(ctlr);
 504                 return NULL;
 505         }
 506
 507         spi->master = spi->controller = ctlr;
 508         spi->dev.parent = &ctlr->dev;
 509         spi->dev.bus = &spi_bus_type;
 510         spi->dev.release = spidev_release;
 511         spi->cs_gpio = -ENOENT;
 512
 513         spin_lock_init(&spi->statistics.lock);
 514
 515         device_initialize(&spi->dev);
 516         return spi;
 517 }
 518 EXPORT_SYMBOL_GPL(spi_alloc_device);
 519
 520 static void spi_dev_set_name(struct spi_device *spi)
 521 {
 522         struct acpi_device *adev = ACPI_COMPANION(&spi->dev);
 523
 524         if (adev) {
 525                 dev_set_name(&spi->dev, "spi-%s", acpi_dev_name(adev));
 526                 return;
 527         }
 528
 529         dev_set_name(&spi->dev, "%s.%u", dev_name(&spi->controller->dev),
 530                      spi->chip_select);
 531 }
 532
 533 static int spi_dev_check(struct device *dev, void *data)
 534 {
 535         struct spi_device *spi = to_spi_device(dev);
 536         struct spi_device *new_spi = data;
 537
 538         if (spi->controller == new_spi->controller &&
 539             spi->chip_select == new_spi->chip_select)
 540                 return -EBUSY;
 541         return 0;
 542 }
 543
 544 /**
 545  * spi_add_device - Add spi_device allocated with spi_alloc_device
 546  * @spi: spi_device to register
 547  *
 548  * Companion function to spi_alloc_device.  Devices allocated with
 549  * spi_alloc_device can be added onto the spi bus with this function.
 550  *
 551  * Return: 0 on success; negative errno on failure
 552  */
 553 int spi_add_device(struct spi_device *spi)
 554 {
 555         static DEFINE_MUTEX(spi_add_lock);
 556         struct spi_controller *ctlr = spi->controller;
 557         struct device *dev = ctlr->dev.parent;
 558         int status;
 559
 560         /* Chipselects are numbered 0..max; validate. */
 561         if (spi->chip_select >= ctlr->num_chipselect) {
 562                 dev_err(dev, "cs%d >= max %d\n", spi->chip_select,
 563                         ctlr->num_chipselect);
 564                 return -EINVAL;
 565         }
 566
 567         /* Set the bus ID string */
 568         spi_dev_set_name(spi);
 569
 570         /* We need to make sure there's no other device with this
 571          * chipselect **BEFORE** we call setup(), else we'll trash
 572          * its configuration.  Lock against concurrent add() calls.
 573          */
 574         mutex_lock(&spi_add_lock);
 575
 576         status = bus_for_each_dev(&spi_bus_type, NULL, spi, spi_dev_check);
 577         if (status) {
 578                 dev_err(dev, "chipselect %d already in use\n",
 579                                 spi->chip_select);
 580                 goto done;
 581         }
 582
 583         if (ctlr->cs_gpios)
 584                 spi->cs_gpio = ctlr->cs_gpios[spi->chip_select];
 585
 586         /* Drivers may modify this initial i/o setup, but will
 587          * normally rely on the device being setup.  Devices
 588          * using SPI_CS_HIGH can't coexist well otherwise...
 589          */
 590         status = spi_setup(spi);
 591         if (status < 0) {
 592                 dev_err(dev, "can't setup %s, status %d\n",
 593                                 dev_name(&spi->dev), status);
 594                 goto done;
 595         }
 596
 597         /* Device may be bound to an active driver when this returns */
 598         status = device_add(&spi->dev);
 599         if (status < 0)
 600                 dev_err(dev, "can't add %s, status %d\n",
 601                                 dev_name(&spi->dev), status);
 602         else
 603                 dev_dbg(dev, "registered child %s\n", dev_name(&spi->dev));
 604
 605 done:
 606         mutex_unlock(&spi_add_lock);
 607         return status;
 608 }
 609 EXPORT_SYMBOL_GPL(spi_add_device);
 610
 611 /**
 612  * spi_new_device - instantiate one new SPI device
 613  * @ctlr: Controller to which device is connected
 614  * @chip: Describes the SPI device
 615  * Context: can sleep
 616  *
 617  * On typical mainboards, this is purely internal; and it's not needed
 618  * after board init creates the hard-wired devices.  Some development
 619  * platforms may not be able to use spi_register_board_info though, and
 620  * this is exported so that for example a USB or parport based adapter
 621  * driver could add devices (which it would learn about out-of-band).
 622  *
 623  * Return: the new device, or NULL.
 624  */
 625 struct spi_device *spi_new_device(struct spi_controller *ctlr,
 626                                   struct spi_board_info *chip)
 627 {
 628         struct spi_device       *proxy;
 629         int                     status;
 630
 631         /* NOTE:  caller did any chip->bus_num checks necessary.
 632          *
 633          * Also, unless we change the return value convention to use
 634          * error-or-pointer (not NULL-or-pointer), troubleshootability
 635          * suggests syslogged diagnostics are best here (ugh).
 636          */
 637
 638         proxy = spi_alloc_device(ctlr);
 639         if (!proxy)
 640                 return NULL;
 641
 642         WARN_ON(strlen(chip->modalias) >= sizeof(proxy->modalias));
 643
 644         proxy->chip_select = chip->chip_select;
 645         proxy->max_speed_hz = chip->max_speed_hz;
 646         proxy->mode = chip->mode;
 647         proxy->irq = chip->irq;
 648         strlcpy(proxy->modalias, chip->modalias, sizeof(proxy->modalias));
 649         proxy->dev.platform_data = (void *) chip->platform_data;
 650         proxy->controller_data = chip->controller_data;
 651         proxy->controller_state = NULL;
 652
 653         if (chip->properties) {
 654                 status = device_add_properties(&proxy->dev, chip->properties);
 655                 if (status) {
 656                         dev_err(&ctlr->dev,
 657                                 "failed to add properties to '%s': %d\n",
 658                                 chip->modalias, status);
 659                         goto err_dev_put;
 660                 }
 661         }
 662
 663         status = spi_add_device(proxy);
 664         if (status < 0)
 665                 goto err_remove_props;
 666
 667         return proxy;
 668
 669 err_remove_props:
 670         if (chip->properties)
 671                 device_remove_properties(&proxy->dev);
 672 err_dev_put:
 673         spi_dev_put(proxy);
 674         return NULL;
 675 }
 676 EXPORT_SYMBOL_GPL(spi_new_device);
 677
 678 /**
 679  * spi_unregister_device - unregister a single SPI device
 680  * @spi: spi_device to unregister
 681  *
 682  * Start making the passed SPI device vanish. Normally this would be handled
 683  * by spi_unregister_controller().
 684  */
 685 void spi_unregister_device(struct spi_device *spi)
 686 {
 687         if (!spi)
 688                 return;
 689
 690         if (spi->dev.of_node) {
 691                 of_node_clear_flag(spi->dev.of_node, OF_POPULATED);
 692                 of_node_put(spi->dev.of_node);
 693         }
 694         if (ACPI_COMPANION(&spi->dev))
 695                 acpi_device_clear_enumerated(ACPI_COMPANION(&spi->dev));
 696         device_unregister(&spi->dev);
 697 }
 698 EXPORT_SYMBOL_GPL(spi_unregister_device);
 699
 700 static void spi_match_controller_to_boardinfo(struct spi_controller *ctlr,
 701                                               struct spi_board_info *bi)
 702 {
 703         struct spi_device *dev;
 704
 705         if (ctlr->bus_num != bi->bus_num)
 706                 return;
 707
 708         dev = spi_new_device(ctlr, bi);
 709         if (!dev)
 710                 dev_err(ctlr->dev.parent, "can't create new device for %s\n",
 711                         bi->modalias);
 712 }
 713
 714 /**
 715  * spi_register_board_info - register SPI devices for a given board
 716  * @info: array of chip descriptors
 717  * @n: how many descriptors are provided
 718  * Context: can sleep
 719  *
 720  * Board-specific early init code calls this (probably during arch_initcall)
 721  * with segments of the SPI device table.  Any device nodes are created later,
 722  * after the relevant parent SPI controller (bus_num) is defined.  We keep
 723  * this table of devices forever, so that reloading a controller driver will
 724  * not make Linux forget about these hard-wired devices.
 725  *
 726  * Other code can also call this, e.g. a particular add-on board might provide
 727  * SPI devices through its expansion connector, so code initializing that board
 728  * would naturally declare its SPI devices.
 729  *
 730  * The board info passed can safely be __initdata ... but be careful of
 731  * any embedded pointers (platform_data, etc), they're copied as-is.
 732  * Device properties are deep-copied though.
 733  *
 734  * Return: zero on success, else a negative error code.
 735  */
 736 int spi_register_board_info(struct spi_board_info const *info, unsigned n)
 737 {
 738         struct boardinfo *bi;
 739         int i;
 740
 741         if (!n)
 742                 return 0;
 743
 744         bi = kcalloc(n, sizeof(*bi), GFP_KERNEL);
 745         if (!bi)
 746                 return -ENOMEM;
 747
 748         for (i = 0; i < n; i++, bi++, info++) {
 749                 struct spi_controller *ctlr;
 750
 751                 memcpy(&bi->board_info, info, sizeof(*info));
 752                 if (info->properties) {
 753                         bi->board_info.properties =
 754                                         property_entries_dup(info->properties);
 755                         if (IS_ERR(bi->board_info.properties))
 756                                 return PTR_ERR(bi->board_info.properties);
 757                 }
 758
 759                 mutex_lock(&board_lock);
 760                 list_add_tail(&bi->list, &board_list);
 761                 list_for_each_entry(ctlr, &spi_controller_list, list)
 762                         spi_match_controller_to_boardinfo(ctlr,
 763                                                           &bi->board_info);
 764                 mutex_unlock(&board_lock);
 765         }
 766
 767         return 0;
 768 }
 769
 770 /*-------------------------------------------------------------------------*/
 771
 772 static void spi_set_cs(struct spi_device *spi, bool enable)
 773 {
 774         if (spi->mode & SPI_CS_HIGH)
 775                 enable = !enable;
 776
 777         if (gpio_is_valid(spi->cs_gpio)) {
 778                 /* Honour the SPI_NO_CS flag */
 779                 if (!(spi->mode & SPI_NO_CS))
 780                         gpio_set_value(spi->cs_gpio, !enable);
 781                 /* Some SPI masters need both GPIO CS & slave_select */
 782                 if ((spi->controller->flags & SPI_MASTER_GPIO_SS) &&
 783                     spi->controller->set_cs)
 784                         spi->controller->set_cs(spi, !enable);
 785         } else if (spi->controller->set_cs) {
 786                 spi->controller->set_cs(spi, !enable);
 787         }
 788 }
 789
 790 #ifdef CONFIG_HAS_DMA
 791 int spi_map_buf(struct spi_controller *ctlr, struct device *dev,
 792                 struct sg_table *sgt, void *buf, size_t len,
 793                 enum dma_data_direction dir)
 794 {
 795         const bool vmalloced_buf = is_vmalloc_addr(buf);
 796         unsigned int max_seg_size = dma_get_max_seg_size(dev);
 797 #ifdef CONFIG_HIGHMEM
 798         const bool kmap_buf = ((unsigned long)buf >= PKMAP_BASE &&
 799                                 (unsigned long)buf < (PKMAP_BASE +
 800                                         (LAST_PKMAP * PAGE_SIZE)));
 801 #else
 802         const bool kmap_buf = false;
 803 #endif
 804         int desc_len;
 805         int sgs;
 806         struct page *vm_page;
 807         struct scatterlist *sg;
 808         void *sg_buf;
 809         size_t min;
 810         int i, ret;
 811
 812         if (vmalloced_buf || kmap_buf) {
 813                 desc_len = min_t(int, max_seg_size, PAGE_SIZE);
 814                 sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
 815         } else if (virt_addr_valid(buf)) {
 816                 desc_len = min_t(int, max_seg_size, ctlr->max_dma_len);
 817                 sgs = DIV_ROUND_UP(len, desc_len);
 818         } else {
 819                 return -EINVAL;
 820         }
 821
 822         ret = sg_alloc_table(sgt, sgs, GFP_KERNEL);
 823         if (ret != 0)
 824                 return ret;
 825
 826         sg = &sgt->sgl[0];
 827         for (i = 0; i < sgs; i++) {
 828
 829                 if (vmalloced_buf || kmap_buf) {
 830                         /*
 831                          * Next scatterlist entry size is the minimum between
 832                          * the desc_len and the remaining buffer length that
 833                          * fits in a page.
 834                          */
 835                         min = min_t(size_t, desc_len,
 836                                     min_t(size_t, len,
 837                                           PAGE_SIZE - offset_in_page(buf)));
 838                         if (vmalloced_buf)
 839                                 vm_page = vmalloc_to_page(buf);
 840                         else
 841                                 vm_page = kmap_to_page(buf);
 842                         if (!vm_page) {
 843                                 sg_free_table(sgt);
 844                                 return -ENOMEM;
 845                         }
 846                         sg_set_page(sg, vm_page,
 847                                     min, offset_in_page(buf));
 848                 } else {
 849                         min = min_t(size_t, len, desc_len);
 850                         sg_buf = buf;
 851                         sg_set_buf(sg, sg_buf, min);
 852                 }
 853
 854                 buf += min;
 855                 len -= min;
 856                 sg = sg_next(sg);
 857         }
 858
 859         ret = dma_map_sg(dev, sgt->sgl, sgt->nents, dir);
 860         if (!ret)
 861                 ret = -ENOMEM;
 862         if (ret < 0) {
 863                 sg_free_table(sgt);
 864                 return ret;
 865         }
 866
 867         sgt->nents = ret;
 868
 869         return 0;
 870 }
 871
 872 void spi_unmap_buf(struct spi_controller *ctlr, struct device *dev,
 873                    struct sg_table *sgt, enum dma_data_direction dir)
 874 {
 875         if (sgt->orig_nents) {
 876                 dma_unmap_sg(dev, sgt->sgl, sgt->orig_nents, dir);
 877                 sg_free_table(sgt);
 878         }
 879 }
 880
 881 static int __spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
 882 {
 883         struct device *tx_dev, *rx_dev;
 884         struct spi_transfer *xfer;
 885         int ret;
 886
 887         if (!ctlr->can_dma)
 888                 return 0;
 889
 890         if (ctlr->dma_tx)
 891                 tx_dev = ctlr->dma_tx->device->dev;
 892         else
 893                 tx_dev = ctlr->dev.parent;
 894
 895         if (ctlr->dma_rx)
 896                 rx_dev = ctlr->dma_rx->device->dev;
 897         else
 898                 rx_dev = ctlr->dev.parent;
 899
 900         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 901                 if (!ctlr->can_dma(ctlr, msg->spi, xfer))
 902                         continue;
 903
 904                 if (xfer->tx_buf != NULL) {
 905                         ret = spi_map_buf(ctlr, tx_dev, &xfer->tx_sg,
 906                                           (void *)xfer->tx_buf, xfer->len,
 907                                           DMA_TO_DEVICE);
 908                         if (ret != 0)
 909                                 return ret;
 910                 }
 911
 912                 if (xfer->rx_buf != NULL) {
 913                         ret = spi_map_buf(ctlr, rx_dev, &xfer->rx_sg,
 914                                           xfer->rx_buf, xfer->len,
 915                                           DMA_FROM_DEVICE);
 916                         if (ret != 0) {
 917                                 spi_unmap_buf(ctlr, tx_dev, &xfer->tx_sg,
 918                                               DMA_TO_DEVICE);
 919                                 return ret;
 920                         }
 921                 }
 922         }
 923
 924         ctlr->cur_msg_mapped = true;
 925
 926         return 0;
 927 }
 928
 929 static int __spi_unmap_msg(struct spi_controller *ctlr, struct spi_message *msg)
 930 {
 931         struct spi_transfer *xfer;
 932         struct device *tx_dev, *rx_dev;
 933
 934         if (!ctlr->cur_msg_mapped || !ctlr->can_dma)
 935                 return 0;
 936
 937         if (ctlr->dma_tx)
 938                 tx_dev = ctlr->dma_tx->device->dev;
 939         else
 940                 tx_dev = ctlr->dev.parent;
 941
 942         if (ctlr->dma_rx)
 943                 rx_dev = ctlr->dma_rx->device->dev;
 944         else
 945                 rx_dev = ctlr->dev.parent;
 946
 947         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 948                 if (!ctlr->can_dma(ctlr, msg->spi, xfer))
 949                         continue;
 950
 951                 spi_unmap_buf(ctlr, rx_dev, &xfer->rx_sg, DMA_FROM_DEVICE);
 952                 spi_unmap_buf(ctlr, tx_dev, &xfer->tx_sg, DMA_TO_DEVICE);
 953         }
 954
 955         return 0;
 956 }
 957 #else /* !CONFIG_HAS_DMA */
 958 static inline int __spi_map_msg(struct spi_controller *ctlr,
 959                                 struct spi_message *msg)
 960 {
 961         return 0;
 962 }
 963
 964 static inline int __spi_unmap_msg(struct spi_controller *ctlr,
 965                                   struct spi_message *msg)
 966 {
 967         return 0;
 968 }
 969 #endif /* !CONFIG_HAS_DMA */
 970
 971 static inline int spi_unmap_msg(struct spi_controller *ctlr,
 972                                 struct spi_message *msg)
 973 {
 974         struct spi_transfer *xfer;
 975
 976         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
 977                 /*
 978                  * Restore the original value of tx_buf or rx_buf if they are
 979                  * NULL.
 980                  */
 981                 if (xfer->tx_buf == ctlr->dummy_tx)
 982                         xfer->tx_buf = NULL;
 983                 if (xfer->rx_buf == ctlr->dummy_rx)
 984                         xfer->rx_buf = NULL;
 985         }
 986
 987         return __spi_unmap_msg(ctlr, msg);
 988 }
 989
 990 static int spi_map_msg(struct spi_controller *ctlr, struct spi_message *msg)
 991 {
 992         struct spi_transfer *xfer;
 993         void *tmp;
 994         unsigned int max_tx, max_rx;
 995
 996         if (ctlr->flags & (SPI_CONTROLLER_MUST_RX | SPI_CONTROLLER_MUST_TX)) {
 997                 max_tx = 0;
 998                 max_rx = 0;
 999
1000                 list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1001                         if ((ctlr->flags & SPI_CONTROLLER_MUST_TX) &&
1002                             !xfer->tx_buf)
1003                                 max_tx = max(xfer->len, max_tx);
1004                         if ((ctlr->flags & SPI_CONTROLLER_MUST_RX) &&
1005                             !xfer->rx_buf)
1006                                 max_rx = max(xfer->len, max_rx);
1007                 }
1008
1009                 if (max_tx) {
1010                         tmp = krealloc(ctlr->dummy_tx, max_tx,
1011                                        GFP_KERNEL | GFP_DMA);
1012                         if (!tmp)
1013                                 return -ENOMEM;
1014                         ctlr->dummy_tx = tmp;
1015                         memset(tmp, 0, max_tx);
1016                 }
1017
1018                 if (max_rx) {
1019                         tmp = krealloc(ctlr->dummy_rx, max_rx,
1020                                        GFP_KERNEL | GFP_DMA);
1021                         if (!tmp)
1022                                 return -ENOMEM;
1023                         ctlr->dummy_rx = tmp;
1024                 }
1025
1026                 if (max_tx || max_rx) {
1027                         list_for_each_entry(xfer, &msg->transfers,
1028                                             transfer_list) {
1029                                 if (!xfer->tx_buf)
1030                                         xfer->tx_buf = ctlr->dummy_tx;
1031                                 if (!xfer->rx_buf)
1032                                         xfer->rx_buf = ctlr->dummy_rx;
1033                         }
1034                 }
1035         }
1036
1037         return __spi_map_msg(ctlr, msg);
1038 }
1039
1040 /*
1041  * spi_transfer_one_message - Default implementation of transfer_one_message()
1042  *
1043  * This is a standard implementation of transfer_one_message() for
1044  * drivers which implement a transfer_one() operation.  It provides
1045  * standard handling of delays and chip select management.
1046  */
1047 static int spi_transfer_one_message(struct spi_controller *ctlr,
1048                                     struct spi_message *msg)
1049 {
1050         struct spi_transfer *xfer;
1051         bool keep_cs = false;
1052         int ret = 0;
1053         unsigned long long ms = 1;
1054         struct spi_statistics *statm = &ctlr->statistics;
1055         struct spi_statistics *stats = &msg->spi->statistics;
1056
1057         spi_set_cs(msg->spi, true);
1058
1059         SPI_STATISTICS_INCREMENT_FIELD(statm, messages);
1060         SPI_STATISTICS_INCREMENT_FIELD(stats, messages);
1061
1062         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
1063                 trace_spi_transfer_start(msg, xfer);
1064
1065                 spi_statistics_add_transfer_stats(statm, xfer, ctlr);
1066                 spi_statistics_add_transfer_stats(stats, xfer, ctlr);
1067
1068                 if (xfer->tx_buf || xfer->rx_buf) {
1069                         reinit_completion(&ctlr->xfer_completion);
1070
1071                         ret = ctlr->transfer_one(ctlr, msg->spi, xfer);
1072                         if (ret < 0) {
1073                                 SPI_STATISTICS_INCREMENT_FIELD(statm,
1074                                                                errors);
1075                                 SPI_STATISTICS_INCREMENT_FIELD(stats,
1076                                                                errors);
1077                                 dev_err(&msg->spi->dev,
1078                                         "SPI transfer failed: %d\n", ret);
1079                                 goto out;
1080                         }
1081
1082                         if (ret > 0) {
1083                                 ret = 0;
1084                                 ms = 8LL * 1000LL * xfer->len;
1085                                 do_div(ms, xfer->speed_hz);
1086                                 ms += ms + 200; /* some tolerance */
1087
1088                                 if (ms > UINT_MAX)
1089                                         ms = UINT_MAX;
1090
1091                                 ms = wait_for_completion_timeout(&ctlr->xfer_completion,
1092                                                                  msecs_to_jiffies(ms));
1093                         }
1094
1095                         if (ms == 0) {
1096                                 SPI_STATISTICS_INCREMENT_FIELD(statm,
1097                                                                timedout);
1098                                 SPI_STATISTICS_INCREMENT_FIELD(stats,
1099                                                                timedout);
1100                                 dev_err(&msg->spi->dev,
1101                                         "SPI transfer timed out\n");
1102                                 msg->status = -ETIMEDOUT;
1103                         }
1104                 } else {
1105                         if (xfer->len)
1106                                 dev_err(&msg->spi->dev,
1107                                         "Bufferless transfer has length %u\n",
1108                                         xfer->len);
1109                 }
1110
1111                 trace_spi_transfer_stop(msg, xfer);
1112
1113                 if (msg->status != -EINPROGRESS)
1114                         goto out;
1115
1116                 if (xfer->delay_usecs) {
1117                         u16 us = xfer->delay_usecs;
1118
1119                         if (us <= 10)
1120                                 udelay(us);
1121                         else
1122                                 usleep_range(us, us + DIV_ROUND_UP(us, 10));
1123                 }
1124
1125                 if (xfer->cs_change) {
1126                         if (list_is_last(&xfer->transfer_list,
1127                                          &msg->transfers)) {
1128                                 keep_cs = true;
1129                         } else {
1130                                 spi_set_cs(msg->spi, false);
1131                                 udelay(10);
1132                                 spi_set_cs(msg->spi, true);
1133                         }
1134                 }
1135
1136                 msg->actual_length += xfer->len;
1137         }
1138
1139 out:
1140         if (ret != 0 || !keep_cs)
1141                 spi_set_cs(msg->spi, false);
1142
1143         if (msg->status == -EINPROGRESS)
1144                 msg->status = ret;
1145
1146         if (msg->status && ctlr->handle_err)
1147                 ctlr->handle_err(ctlr, msg);
1148
1149         spi_res_release(ctlr, msg);
1150
1151         spi_finalize_current_message(ctlr);
1152
1153         return ret;
1154 }
1155
1156 /**
1157  * spi_finalize_current_transfer - report completion of a transfer
1158  * @ctlr: the controller reporting completion
1159  *
1160  * Called by SPI drivers using the core transfer_one_message()
1161  * implementation to notify it that the current interrupt driven
1162  * transfer has finished and the next one may be scheduled.
1163  */
1164 void spi_finalize_current_transfer(struct spi_controller *ctlr)
1165 {
1166         complete(&ctlr->xfer_completion);
1167 }
1168 EXPORT_SYMBOL_GPL(spi_finalize_current_transfer);
1169
1170 /**
1171  * __spi_pump_messages - function which processes spi message queue
1172  * @ctlr: controller to process queue for
1173  * @in_kthread: true if we are in the context of the message pump thread
1174  *
1175  * This function checks if there is any spi message in the queue that
1176  * needs processing and if so call out to the driver to initialize hardware
1177  * and transfer each message.
1178  *
1179  * Note that it is called both from the kthread itself and also from
1180  * inside spi_sync(); the queue extraction handling at the top of the
1181  * function should deal with this safely.
1182  */
1183 static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread)
1184 {
1185         unsigned long flags;
1186         bool was_busy = false;
1187         int ret;
1188
1189         /* Lock queue */
1190         spin_lock_irqsave(&ctlr->queue_lock, flags);
1191
1192         /* Make sure we are not already running a message */
1193         if (ctlr->cur_msg) {
1194                 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1195                 return;
1196         }
1197
1198         /* If another context is idling the device then defer */
1199         if (ctlr->idling) {
1200                 kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1201                 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1202                 return;
1203         }
1204
1205         /* Check if the queue is idle */
1206         if (list_empty(&ctlr->queue) || !ctlr->running) {
1207                 if (!ctlr->busy) {
1208                         spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1209                         return;
1210                 }
1211
1212                 /* Only do teardown in the thread */
1213                 if (!in_kthread) {
1214                         kthread_queue_work(&ctlr->kworker,
1215                                            &ctlr->pump_messages);
1216                         spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1217                         return;
1218                 }
1219
1220                 ctlr->busy = false;
1221                 ctlr->idling = true;
1222                 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1223
1224                 kfree(ctlr->dummy_rx);
1225                 ctlr->dummy_rx = NULL;
1226                 kfree(ctlr->dummy_tx);
1227                 ctlr->dummy_tx = NULL;
1228                 if (ctlr->unprepare_transfer_hardware &&
1229                     ctlr->unprepare_transfer_hardware(ctlr))
1230                         dev_err(&ctlr->dev,
1231                                 "failed to unprepare transfer hardware\n");
1232                 if (ctlr->auto_runtime_pm) {
1233                         pm_runtime_mark_last_busy(ctlr->dev.parent);
1234                         pm_runtime_put_autosuspend(ctlr->dev.parent);
1235                 }
1236                 trace_spi_controller_idle(ctlr);
1237
1238                 spin_lock_irqsave(&ctlr->queue_lock, flags);
1239                 ctlr->idling = false;
1240                 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1241                 return;
1242         }
1243
1244         /* Extract head of queue */
1245         ctlr->cur_msg =
1246                 list_first_entry(&ctlr->queue, struct spi_message, queue);
1247
1248         list_del_init(&ctlr->cur_msg->queue);
1249         if (ctlr->busy)
1250                 was_busy = true;
1251         else
1252                 ctlr->busy = true;
1253         spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1254
1255         mutex_lock(&ctlr->io_mutex);
1256
1257         if (!was_busy && ctlr->auto_runtime_pm) {
1258                 ret = pm_runtime_get_sync(ctlr->dev.parent);
1259                 if (ret < 0) {
1260                         pm_runtime_put_noidle(ctlr->dev.parent);
1261                         dev_err(&ctlr->dev, "Failed to power device: %d\n",
1262                                 ret);
1263                         mutex_unlock(&ctlr->io_mutex);
1264                         return;
1265                 }
1266         }
1267
1268         if (!was_busy)
1269                 trace_spi_controller_busy(ctlr);
1270
1271         if (!was_busy && ctlr->prepare_transfer_hardware) {
1272                 ret = ctlr->prepare_transfer_hardware(ctlr);
1273                 if (ret) {
1274                         dev_err(&ctlr->dev,
1275                                 "failed to prepare transfer hardware\n");
1276
1277                         if (ctlr->auto_runtime_pm)
1278                                 pm_runtime_put(ctlr->dev.parent);
1279                         mutex_unlock(&ctlr->io_mutex);
1280                         return;
1281                 }
1282         }
1283
1284         trace_spi_message_start(ctlr->cur_msg);
1285
1286         if (ctlr->prepare_message) {
1287                 ret = ctlr->prepare_message(ctlr, ctlr->cur_msg);
1288                 if (ret) {
1289                         dev_err(&ctlr->dev, "failed to prepare message: %d\n",
1290                                 ret);
1291                         ctlr->cur_msg->status = ret;
1292                         spi_finalize_current_message(ctlr);
1293                         goto out;
1294                 }
1295                 ctlr->cur_msg_prepared = true;
1296         }
1297
1298         ret = spi_map_msg(ctlr, ctlr->cur_msg);
1299         if (ret) {
1300                 ctlr->cur_msg->status = ret;
1301                 spi_finalize_current_message(ctlr);
1302                 goto out;
1303         }
1304
1305         ret = ctlr->transfer_one_message(ctlr, ctlr->cur_msg);
1306         if (ret) {
1307                 dev_err(&ctlr->dev,
1308                         "failed to transfer one message from queue\n");
1309                 goto out;
1310         }
1311
1312 out:
1313         mutex_unlock(&ctlr->io_mutex);
1314
1315         /* Prod the scheduler in case transfer_one() was busy waiting */
1316         if (!ret)
1317                 cond_resched();
1318 }
1319
1320 /**
1321  * spi_pump_messages - kthread work function which processes spi message queue
1322  * @work: pointer to kthread work struct contained in the controller struct
1323  */
1324 static void spi_pump_messages(struct kthread_work *work)
1325 {
1326         struct spi_controller *ctlr =
1327                 container_of(work, struct spi_controller, pump_messages);
1328
1329         __spi_pump_messages(ctlr, true);
1330 }
1331
1332 static int spi_init_queue(struct spi_controller *ctlr)
1333 {
1334         struct sched_param param = { .sched_priority = MAX_RT_PRIO - 1 };
1335
1336         ctlr->running = false;
1337         ctlr->busy = false;
1338
1339         kthread_init_worker(&ctlr->kworker);
1340         ctlr->kworker_task = kthread_run(kthread_worker_fn, &ctlr->kworker,
1341                                          "%s", dev_name(&ctlr->dev));
1342         if (IS_ERR(ctlr->kworker_task)) {
1343                 dev_err(&ctlr->dev, "failed to create message pump task\n");
1344                 return PTR_ERR(ctlr->kworker_task);
1345         }
1346         kthread_init_work(&ctlr->pump_messages, spi_pump_messages);
1347
1348         /*
1349          * Controller config will indicate if this controller should run the
1350          * message pump with high (realtime) priority to reduce the transfer
1351          * latency on the bus by minimising the delay between a transfer
1352          * request and the scheduling of the message pump thread. Without this
1353          * setting the message pump thread will remain at default priority.
1354          */
1355         if (ctlr->rt) {
1356                 dev_info(&ctlr->dev,
1357                         "will run message pump with realtime priority\n");
1358                 sched_setscheduler(ctlr->kworker_task, SCHED_FIFO, &param);
1359         }
1360
1361         return 0;
1362 }
1363
1364 /**
1365  * spi_get_next_queued_message() - called by driver to check for queued
1366  * messages
1367  * @ctlr: the controller to check for queued messages
1368  *
1369  * If there are more messages in the queue, the next message is returned from
1370  * this call.
1371  *
1372  * Return: the next message in the queue, else NULL if the queue is empty.
1373  */
1374 struct spi_message *spi_get_next_queued_message(struct spi_controller *ctlr)
1375 {
1376         struct spi_message *next;
1377         unsigned long flags;
1378
1379         /* get a pointer to the next message, if any */
1380         spin_lock_irqsave(&ctlr->queue_lock, flags);
1381         next = list_first_entry_or_null(&ctlr->queue, struct spi_message,
1382                                         queue);
1383         spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1384
1385         return next;
1386 }
1387 EXPORT_SYMBOL_GPL(spi_get_next_queued_message);
1388
1389 /**
1390  * spi_finalize_current_message() - the current message is complete
1391  * @ctlr: the controller to return the message to
1392  *
1393  * Called by the driver to notify the core that the message in the front of the
1394  * queue is complete and can be removed from the queue.
1395  */
1396 void spi_finalize_current_message(struct spi_controller *ctlr)
1397 {
1398         struct spi_message *mesg;
1399         unsigned long flags;
1400         int ret;
1401
1402         spin_lock_irqsave(&ctlr->queue_lock, flags);
1403         mesg = ctlr->cur_msg;
1404         spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1405
1406         spi_unmap_msg(ctlr, mesg);
1407
1408         if (ctlr->cur_msg_prepared && ctlr->unprepare_message) {
1409                 ret = ctlr->unprepare_message(ctlr, mesg);
1410                 if (ret) {
1411                         dev_err(&ctlr->dev, "failed to unprepare message: %d\n",
1412                                 ret);
1413                 }
1414         }
1415
1416         spin_lock_irqsave(&ctlr->queue_lock, flags);
1417         ctlr->cur_msg = NULL;
1418         ctlr->cur_msg_prepared = false;
1419         kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1420         spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1421
1422         trace_spi_message_done(mesg);
1423
1424         mesg->state = NULL;
1425         if (mesg->complete)
1426                 mesg->complete(mesg->context);
1427 }
1428 EXPORT_SYMBOL_GPL(spi_finalize_current_message);
1429
1430 static int spi_start_queue(struct spi_controller *ctlr)
1431 {
1432         unsigned long flags;
1433
1434         spin_lock_irqsave(&ctlr->queue_lock, flags);
1435
1436         if (ctlr->running || ctlr->busy) {
1437                 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1438                 return -EBUSY;
1439         }
1440
1441         ctlr->running = true;
1442         ctlr->cur_msg = NULL;
1443         spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1444
1445         kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1446
1447         return 0;
1448 }
1449
1450 static int spi_stop_queue(struct spi_controller *ctlr)
1451 {
1452         unsigned long flags;
1453         unsigned limit = 500;
1454         int ret = 0;
1455
1456         spin_lock_irqsave(&ctlr->queue_lock, flags);
1457
1458         /*
1459          * This is a bit lame, but is optimized for the common execution path.
1460          * A wait_queue on the ctlr->busy could be used, but then the common
1461          * execution path (pump_messages) would be required to call wake_up or
1462          * friends on every SPI message. Do this instead.
1463          */
1464         while ((!list_empty(&ctlr->queue) || ctlr->busy) && limit--) {
1465                 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1466                 usleep_range(10000, 11000);
1467                 spin_lock_irqsave(&ctlr->queue_lock, flags);
1468         }
1469
1470         if (!list_empty(&ctlr->queue) || ctlr->busy)
1471                 ret = -EBUSY;
1472         else
1473                 ctlr->running = false;
1474
1475         spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1476
1477         if (ret) {
1478                 dev_warn(&ctlr->dev, "could not stop message queue\n");
1479                 return ret;
1480         }
1481         return ret;
1482 }
1483
1484 static int spi_destroy_queue(struct spi_controller *ctlr)
1485 {
1486         int ret;
1487
1488         ret = spi_stop_queue(ctlr);
1489
1490         /*
1491          * kthread_flush_worker will block until all work is done.
1492          * If the reason that stop_queue timed out is that the work will never
1493          * finish, then it does no good to call flush/stop thread, so
1494          * return anyway.
1495          */
1496         if (ret) {
1497                 dev_err(&ctlr->dev, "problem destroying queue\n");
1498                 return ret;
1499         }
1500
1501         kthread_flush_worker(&ctlr->kworker);
1502         kthread_stop(ctlr->kworker_task);
1503
1504         return 0;
1505 }
1506
1507 static int __spi_queued_transfer(struct spi_device *spi,
1508                                  struct spi_message *msg,
1509                                  bool need_pump)
1510 {
1511         struct spi_controller *ctlr = spi->controller;
1512         unsigned long flags;
1513
1514         spin_lock_irqsave(&ctlr->queue_lock, flags);
1515
1516         if (!ctlr->running) {
1517                 spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1518                 return -ESHUTDOWN;
1519         }
1520         msg->actual_length = 0;
1521         msg->status = -EINPROGRESS;
1522
1523         list_add_tail(&msg->queue, &ctlr->queue);
1524         if (!ctlr->busy && need_pump)
1525                 kthread_queue_work(&ctlr->kworker, &ctlr->pump_messages);
1526
1527         spin_unlock_irqrestore(&ctlr->queue_lock, flags);
1528         return 0;
1529 }
1530
1531 /**
1532  * spi_queued_transfer - transfer function for queued transfers
1533  * @spi: spi device which is requesting transfer
1534  * @msg: spi message which is to handled is queued to driver queue
1535  *
1536  * Return: zero on success, else a negative error code.
1537  */
1538 static int spi_queued_transfer(struct spi_device *spi, struct spi_message *msg)
1539 {
1540         return __spi_queued_transfer(spi, msg, true);
1541 }
1542
1543 static int spi_controller_initialize_queue(struct spi_controller *ctlr)
1544 {
1545         int ret;
1546
1547         ctlr->transfer = spi_queued_transfer;
1548         if (!ctlr->transfer_one_message)
1549                 ctlr->transfer_one_message = spi_transfer_one_message;
1550
1551         /* Initialize and start queue */
1552         ret = spi_init_queue(ctlr);
1553         if (ret) {
1554                 dev_err(&ctlr->dev, "problem initializing queue\n");
1555                 goto err_init_queue;
1556         }
1557         ctlr->queued = true;
1558         ret = spi_start_queue(ctlr);
1559         if (ret) {
1560                 dev_err(&ctlr->dev, "problem starting queue\n");
1561                 goto err_start_queue;
1562         }
1563
1564         return 0;
1565
1566 err_start_queue:
1567         spi_destroy_queue(ctlr);
1568 err_init_queue:
1569         return ret;
1570 }
1571
1572 /**
1573  * spi_flush_queue - Send all pending messages in the queue from the callers'
1574  *                   context
1575  * @ctlr: controller to process queue for
1576  *
1577  * This should be used when one wants to ensure all pending messages have been
1578  * sent before doing something. Is used by the spi-mem code to make sure SPI
1579  * memory operations do not preempt regular SPI transfers that have been queued
1580  * before the spi-mem operation.
1581  */
1582 void spi_flush_queue(struct spi_controller *ctlr)
1583 {
1584         if (ctlr->transfer == spi_queued_transfer)
1585                 __spi_pump_messages(ctlr, false);
1586 }
1587
1588 /*-------------------------------------------------------------------------*/
1589
1590 #if defined(CONFIG_OF)
1591 static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
1592                            struct device_node *nc)
1593 {
1594         u32 value;
1595         int rc;
1596
1597         /* Mode (clock phase/polarity/etc.) */
1598         if (of_property_read_bool(nc, "spi-cpha"))
1599                 spi->mode |= SPI_CPHA;
1600         if (of_property_read_bool(nc, "spi-cpol"))
1601                 spi->mode |= SPI_CPOL;
1602         if (of_property_read_bool(nc, "spi-cs-high"))
1603                 spi->mode |= SPI_CS_HIGH;
1604         if (of_property_read_bool(nc, "spi-3wire"))
1605                 spi->mode |= SPI_3WIRE;
1606         if (of_property_read_bool(nc, "spi-lsb-first"))
1607                 spi->mode |= SPI_LSB_FIRST;
1608
1609         /* Device DUAL/QUAD mode */
1610         if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) {
1611                 switch (value) {
1612                 case 1:
1613                         break;
1614                 case 2:
1615                         spi->mode |= SPI_TX_DUAL;
1616                         break;
1617                 case 4:
1618                         spi->mode |= SPI_TX_QUAD;
1619                         break;
1620                 default:
1621                         dev_warn(&ctlr->dev,
1622                                 "spi-tx-bus-width %d not supported\n",
1623                                 value);
1624                         break;
1625                 }
1626         }
1627
1628         if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) {
1629                 switch (value) {
1630                 case 1:
1631                         break;
1632                 case 2:
1633                         spi->mode |= SPI_RX_DUAL;
1634                         break;
1635                 case 4:
1636                         spi->mode |= SPI_RX_QUAD;
1637                         break;
1638                 default:
1639                         dev_warn(&ctlr->dev,
1640                                 "spi-rx-bus-width %d not supported\n",
1641                                 value);
1642                         break;
1643                 }
1644         }
1645
1646         if (spi_controller_is_slave(ctlr)) {
1647                 if (strcmp(nc->name, "slave")) {
1648                         dev_err(&ctlr->dev, "%pOF is not called 'slave'\n",
1649                                 nc);
1650                         return -EINVAL;
1651                 }
1652                 return 0;
1653         }
1654
1655         /* Device address */
1656         rc = of_property_read_u32(nc, "reg", &value);
1657         if (rc) {
1658                 dev_err(&ctlr->dev, "%pOF has no valid 'reg' property (%d)\n",
1659                         nc, rc);
1660                 return rc;
1661         }
1662         spi->chip_select = value;
1663
1664         /* Device speed */
1665         rc = of_property_read_u32(nc, "spi-max-frequency", &value);
1666         if (rc) {
1667                 dev_err(&ctlr->dev,
1668                         "%pOF has no valid 'spi-max-frequency' property (%d)\n", nc, rc);
1669                 return rc;
1670         }
1671         spi->max_speed_hz = value;
1672
1673         return 0;
1674 }
1675
1676 static struct spi_device *
1677 of_register_spi_device(struct spi_controller *ctlr, struct device_node *nc)
1678 {
1679         struct spi_device *spi;
1680         int rc;
1681
1682         /* Alloc an spi_device */
1683         spi = spi_alloc_device(ctlr);
1684         if (!spi) {
1685                 dev_err(&ctlr->dev, "spi_device alloc error for %pOF\n", nc);
1686                 rc = -ENOMEM;
1687                 goto err_out;
1688         }
1689
1690         /* Select device driver */
1691         rc = of_modalias_node(nc, spi->modalias,
1692                                 sizeof(spi->modalias));
1693         if (rc < 0) {
1694                 dev_err(&ctlr->dev, "cannot find modalias for %pOF\n", nc);
1695                 goto err_out;
1696         }
1697
1698         rc = of_spi_parse_dt(ctlr, spi, nc);
1699         if (rc)
1700                 goto err_out;
1701
1702         /* Store a pointer to the node in the device structure */
1703         of_node_get(nc);
1704         spi->dev.of_node = nc;
1705
1706         /* Register the new device */
1707         rc = spi_add_device(spi);
1708         if (rc) {
1709                 dev_err(&ctlr->dev, "spi_device register error %pOF\n", nc);
1710                 goto err_of_node_put;
1711         }
1712
1713         return spi;
1714
1715 err_of_node_put:
1716         of_node_put(nc);
1717 err_out:
1718         spi_dev_put(spi);
1719         return ERR_PTR(rc);
1720 }
1721
1722 /**
1723  * of_register_spi_devices() - Register child devices onto the SPI bus
1724  * @ctlr:       Pointer to spi_controller device
1725  *
1726  * Registers an spi_device for each child node of controller node which
1727  * represents a valid SPI slave.
1728  */
1729 static void of_register_spi_devices(struct spi_controller *ctlr)
1730 {
1731         struct spi_device *spi;
1732         struct device_node *nc;
1733
1734         if (!ctlr->dev.of_node)
1735                 return;
1736
1737         for_each_available_child_of_node(ctlr->dev.of_node, nc) {
1738                 if (of_node_test_and_set_flag(nc, OF_POPULATED))
1739                         continue;
1740                 spi = of_register_spi_device(ctlr, nc);
1741                 if (IS_ERR(spi)) {
1742                         dev_warn(&ctlr->dev,
1743                                  "Failed to create SPI device for %pOF\n", nc);
1744                         of_node_clear_flag(nc, OF_POPULATED);
1745                 }
1746         }
1747 }
1748 #else
1749 static void of_register_spi_devices(struct spi_controller *ctlr) { }
1750 #endif
1751
1752 #ifdef CONFIG_ACPI
1753 static void acpi_spi_parse_apple_properties(struct spi_device *spi)
1754 {
1755         struct acpi_device *dev = ACPI_COMPANION(&spi->dev);
1756         const union acpi_object *obj;
1757
1758         if (!x86_apple_machine)
1759                 return;
1760
1761         if (!acpi_dev_get_property(dev, "spiSclkPeriod", ACPI_TYPE_BUFFER, &obj)
1762             && obj->buffer.length >= 4)
1763                 spi->max_speed_hz  = NSEC_PER_SEC / *(u32 *)obj->buffer.pointer;
1764
1765         if (!acpi_dev_get_property(dev, "spiWordSize", ACPI_TYPE_BUFFER, &obj)
1766             && obj->buffer.length == 8)
1767                 spi->bits_per_word = *(u64 *)obj->buffer.pointer;
1768
1769         if (!acpi_dev_get_property(dev, "spiBitOrder", ACPI_TYPE_BUFFER, &obj)
1770             && obj->buffer.length == 8 && !*(u64 *)obj->buffer.pointer)
1771                 spi->mode |= SPI_LSB_FIRST;
1772
1773         if (!acpi_dev_get_property(dev, "spiSPO", ACPI_TYPE_BUFFER, &obj)
1774             && obj->buffer.length == 8 &&  *(u64 *)obj->buffer.pointer)
1775                 spi->mode |= SPI_CPOL;
1776
1777         if (!acpi_dev_get_property(dev, "spiSPH", ACPI_TYPE_BUFFER, &obj)
1778             && obj->buffer.length == 8 &&  *(u64 *)obj->buffer.pointer)
1779                 spi->mode |= SPI_CPHA;
1780 }
1781
1782 static int acpi_spi_add_resource(struct acpi_resource *ares, void *data)
1783 {
1784         struct spi_device *spi = data;
1785         struct spi_controller *ctlr = spi->controller;
1786
1787         if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
1788                 struct acpi_resource_spi_serialbus *sb;
1789
1790                 sb = &ares->data.spi_serial_bus;
1791                 if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_SPI) {
1792                         /*
1793                          * ACPI DeviceSelection numbering is handled by the
1794                          * host controller driver in Windows and can vary
1795                          * from driver to driver. In Linux we always expect
1796                          * 0 .. max - 1 so we need to ask the driver to
1797                          * translate between the two schemes.
1798                          */
1799                         if (ctlr->fw_translate_cs) {
1800                                 int cs = ctlr->fw_translate_cs(ctlr,
1801                                                 sb->device_selection);
1802                                 if (cs < 0)
1803                                         return cs;
1804                                 spi->chip_select = cs;
1805                         } else {
1806                                 spi->chip_select = sb->device_selection;
1807                         }
1808
1809                         spi->max_speed_hz = sb->connection_speed;
1810
1811                         if (sb->clock_phase == ACPI_SPI_SECOND_PHASE)
1812                                 spi->mode |= SPI_CPHA;
1813                         if (sb->clock_polarity == ACPI_SPI_START_HIGH)
1814                                 spi->mode |= SPI_CPOL;
1815                         if (sb->device_polarity == ACPI_SPI_ACTIVE_HIGH)
1816                                 spi->mode |= SPI_CS_HIGH;
1817                 }
1818         } else if (spi->irq < 0) {
1819                 struct resource r;
1820
1821                 if (acpi_dev_resource_interrupt(ares, 0, &r))
1822                         spi->irq = r.start;
1823         }
1824
1825         /* Always tell the ACPI core to skip this resource */
1826         return 1;
1827 }
1828
1829 static acpi_status acpi_register_spi_device(struct spi_controller *ctlr,
1830                                             struct acpi_device *adev)
1831 {
1832         struct list_head resource_list;
1833         struct spi_device *spi;
1834         int ret;
1835
1836         if (acpi_bus_get_status(adev) || !adev->status.present ||
1837             acpi_device_enumerated(adev))
1838                 return AE_OK;
1839
1840         spi = spi_alloc_device(ctlr);
1841         if (!spi) {
1842                 dev_err(&ctlr->dev, "failed to allocate SPI device for %s\n",
1843                         dev_name(&adev->dev));
1844                 return AE_NO_MEMORY;
1845         }
1846
1847         ACPI_COMPANION_SET(&spi->dev, adev);
1848         spi->irq = -1;
1849
1850         INIT_LIST_HEAD(&resource_list);
1851         ret = acpi_dev_get_resources(adev, &resource_list,
1852                                      acpi_spi_add_resource, spi);
1853         acpi_dev_free_resource_list(&resource_list);
1854
1855         acpi_spi_parse_apple_properties(spi);
1856
1857         if (ret < 0 || !spi->max_speed_hz) {
1858                 spi_dev_put(spi);
1859                 return AE_OK;
1860         }
1861
1862         acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias,
1863                           sizeof(spi->modalias));
1864
1865         if (spi->irq < 0)
1866                 spi->irq = acpi_dev_gpio_irq_get(adev, 0);
1867
1868         acpi_device_set_enumerated(adev);
1869
1870         adev->power.flags.ignore_parent = true;
1871         if (spi_add_device(spi)) {
1872                 adev->power.flags.ignore_parent = false;
1873                 dev_err(&ctlr->dev, "failed to add SPI device %s from ACPI\n",
1874                         dev_name(&adev->dev));
1875                 spi_dev_put(spi);
1876         }
1877
1878         return AE_OK;
1879 }
1880
1881 static acpi_status acpi_spi_add_device(acpi_handle handle, u32 level,
1882                                        void *data, void **return_value)
1883 {
1884         struct spi_controller *ctlr = data;
1885         struct acpi_device *adev;
1886
1887         if (acpi_bus_get_device(handle, &adev))
1888                 return AE_OK;
1889
1890         return acpi_register_spi_device(ctlr, adev);
1891 }
1892
1893 static void acpi_register_spi_devices(struct spi_controller *ctlr)
1894 {
1895         acpi_status status;
1896         acpi_handle handle;
1897
1898         handle = ACPI_HANDLE(ctlr->dev.parent);
1899         if (!handle)
1900                 return;
1901
1902         status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
1903                                      acpi_spi_add_device, NULL, ctlr, NULL);
1904         if (ACPI_FAILURE(status))
1905                 dev_warn(&ctlr->dev, "failed to enumerate SPI slaves\n");
1906 }
1907 #else
1908 static inline void acpi_register_spi_devices(struct spi_controller *ctlr) {}
1909 #endif /* CONFIG_ACPI */
1910
1911 static void spi_controller_release(struct device *dev)
1912 {
1913         struct spi_controller *ctlr;
1914
1915         ctlr = container_of(dev, struct spi_controller, dev);
1916         kfree(ctlr);
1917 }
1918
1919 static struct class spi_master_class = {
1920         .name           = "spi_master",
1921         .owner          = THIS_MODULE,
1922         .dev_release    = spi_controller_release,
1923         .dev_groups     = spi_master_groups,
1924 };
1925
1926 #ifdef CONFIG_SPI_SLAVE
1927 /**
1928  * spi_slave_abort - abort the ongoing transfer request on an SPI slave
1929  *                   controller
1930  * @spi: device used for the current transfer
1931  */
1932 int spi_slave_abort(struct spi_device *spi)
1933 {
1934         struct spi_controller *ctlr = spi->controller;
1935
1936         if (spi_controller_is_slave(ctlr) && ctlr->slave_abort)
1937                 return ctlr->slave_abort(ctlr);
1938
1939         return -ENOTSUPP;
1940 }
1941 EXPORT_SYMBOL_GPL(spi_slave_abort);
1942
1943 static int match_true(struct device *dev, void *data)
1944 {
1945         return 1;
1946 }
1947
1948 static ssize_t spi_slave_show(struct device *dev,
1949                               struct device_attribute *attr, char *buf)
1950 {
1951         struct spi_controller *ctlr = container_of(dev, struct spi_controller,
1952                                                    dev);
1953         struct device *child;
1954
1955         child = device_find_child(&ctlr->dev, NULL, match_true);
1956         return sprintf(buf, "%s\n",
1957                        child ? to_spi_device(child)->modalias : NULL);
1958 }
1959
1960 static ssize_t spi_slave_store(struct device *dev,
1961                                struct device_attribute *attr, const char *buf,
1962                                size_t count)
1963 {
1964         struct spi_controller *ctlr = container_of(dev, struct spi_controller,
1965                                                    dev);
1966         struct spi_device *spi;
1967         struct device *child;
1968         char name[32];
1969         int rc;
1970
1971         rc = sscanf(buf, "%31s", name);
1972         if (rc != 1 || !name[0])
1973                 return -EINVAL;
1974
1975         child = device_find_child(&ctlr->dev, NULL, match_true);
1976         if (child) {
1977                 /* Remove registered slave */
1978                 device_unregister(child);
1979                 put_device(child);
1980         }
1981
1982         if (strcmp(name, "(null)")) {
1983                 /* Register new slave */
1984                 spi = spi_alloc_device(ctlr);
1985                 if (!spi)
1986                         return -ENOMEM;
1987
1988                 strlcpy(spi->modalias, name, sizeof(spi->modalias));
1989
1990                 rc = spi_add_device(spi);
1991                 if (rc) {
1992                         spi_dev_put(spi);
1993                         return rc;
1994                 }
1995         }
1996
1997         return count;
1998 }
1999
2000 static DEVICE_ATTR(slave, 0644, spi_slave_show, spi_slave_store);
2001
2002 static struct attribute *spi_slave_attrs[] = {
2003         &dev_attr_slave.attr,
2004         NULL,
2005 };
2006
2007 static const struct attribute_group spi_slave_group = {
2008         .attrs = spi_slave_attrs,
2009 };
2010
2011 static const struct attribute_group *spi_slave_groups[] = {
2012         &spi_controller_statistics_group,
2013         &spi_slave_group,
2014         NULL,
2015 };
2016
2017 static struct class spi_slave_class = {
2018         .name           = "spi_slave",
2019         .owner          = THIS_MODULE,
2020         .dev_release    = spi_controller_release,
2021         .dev_groups     = spi_slave_groups,
2022 };
2023 #else
2024 extern struct class spi_slave_class;    /* dummy */
2025 #endif
2026
2027 /**
2028  * __spi_alloc_controller - allocate an SPI master or slave controller
2029  * @dev: the controller, possibly using the platform_bus
2030  * @size: how much zeroed driver-private data to allocate; the pointer to this
2031  *      memory is in the driver_data field of the returned device,
2032  *      accessible with spi_controller_get_devdata().
2033  * @slave: flag indicating whether to allocate an SPI master (false) or SPI
2034  *      slave (true) controller
2035  * Context: can sleep
2036  *
2037  * This call is used only by SPI controller drivers, which are the
2038  * only ones directly touching chip registers.  It's how they allocate
2039  * an spi_controller structure, prior to calling spi_register_controller().
2040  *
2041  * This must be called from context that can sleep.
2042  *
2043  * The caller is responsible for assigning the bus number and initializing the
2044  * controller's methods before calling spi_register_controller(); and (after
2045  * errors adding the device) calling spi_controller_put() to prevent a memory
2046  * leak.
2047  *
2048  * Return: the SPI controller structure on success, else NULL.
2049  */
2050 struct spi_controller *__spi_alloc_controller(struct device *dev,
2051                                               unsigned int size, bool slave)
2052 {
2053         struct spi_controller   *ctlr;
2054
2055         if (!dev)
2056                 return NULL;
2057
2058         ctlr = kzalloc(size + sizeof(*ctlr), GFP_KERNEL);
2059         if (!ctlr)
2060                 return NULL;
2061
2062         device_initialize(&ctlr->dev);
2063         ctlr->bus_num = -1;
2064         ctlr->num_chipselect = 1;
2065         ctlr->slave = slave;
2066         if (IS_ENABLED(CONFIG_SPI_SLAVE) && slave)
2067                 ctlr->dev.class = &spi_slave_class;
2068         else
2069                 ctlr->dev.class = &spi_master_class;
2070         ctlr->dev.parent = dev;
2071         pm_suspend_ignore_children(&ctlr->dev, true);
2072         spi_controller_set_devdata(ctlr, &ctlr[1]);
2073
2074         return ctlr;
2075 }
2076 EXPORT_SYMBOL_GPL(__spi_alloc_controller);
2077
2078 #ifdef CONFIG_OF
2079 static int of_spi_register_master(struct spi_controller *ctlr)
2080 {
2081         int nb, i, *cs;
2082         struct device_node *np = ctlr->dev.of_node;
2083
2084         if (!np)
2085                 return 0;
2086
2087         nb = of_gpio_named_count(np, "cs-gpios");
2088         ctlr->num_chipselect = max_t(int, nb, ctlr->num_chipselect);
2089
2090         /* Return error only for an incorrectly formed cs-gpios property */
2091         if (nb == 0 || nb == -ENOENT)
2092                 return 0;
2093         else if (nb < 0)
2094                 return nb;
2095
2096         cs = devm_kcalloc(&ctlr->dev, ctlr->num_chipselect, sizeof(int),
2097                           GFP_KERNEL);
2098         ctlr->cs_gpios = cs;
2099
2100         if (!ctlr->cs_gpios)
2101                 return -ENOMEM;
2102
2103         for (i = 0; i < ctlr->num_chipselect; i++)
2104                 cs[i] = -ENOENT;
2105
2106         for (i = 0; i < nb; i++)
2107                 cs[i] = of_get_named_gpio(np, "cs-gpios", i);
2108
2109         return 0;
2110 }
2111 #else
2112 static int of_spi_register_master(struct spi_controller *ctlr)
2113 {
2114         return 0;
2115 }
2116 #endif
2117
2118 static int spi_controller_check_ops(struct spi_controller *ctlr)
2119 {
2120         /*
2121          * The controller may implement only the high-level SPI-memory like
2122          * operations if it does not support regular SPI transfers, and this is
2123          * valid use case.
2124          * If ->mem_ops is NULL, we request that at least one of the
2125          * ->transfer_xxx() method be implemented.
2126          */
2127         if (ctlr->mem_ops) {
2128                 if (!ctlr->mem_ops->exec_op)
2129                         return -EINVAL;
2130         } else if (!ctlr->transfer && !ctlr->transfer_one &&
2131                    !ctlr->transfer_one_message) {
2132                 return -EINVAL;
2133         }
2134
2135         return 0;
2136 }
2137
2138 /**
2139  * spi_register_controller - register SPI master or slave controller
2140  * @ctlr: initialized master, originally from spi_alloc_master() or
2141  *      spi_alloc_slave()
2142  * Context: can sleep
2143  *
2144  * SPI controllers connect to their drivers using some non-SPI bus,
2145  * such as the platform bus.  The final stage of probe() in that code
2146  * includes calling spi_register_controller() to hook up to this SPI bus glue.
2147  *
2148  * SPI controllers use board specific (often SOC specific) bus numbers,
2149  * and board-specific addressing for SPI devices combines those numbers
2150  * with chip select numbers.  Since SPI does not directly support dynamic
2151  * device identification, boards need configuration tables telling which
2152  * chip is at which address.
2153  *
2154  * This must be called from context that can sleep.  It returns zero on
2155  * success, else a negative error code (dropping the controller's refcount).
2156  * After a successful return, the caller is responsible for calling
2157  * spi_unregister_controller().
2158  *
2159  * Return: zero on success, else a negative error code.
2160  */
2161 int spi_register_controller(struct spi_controller *ctlr)
2162 {
2163         struct device           *dev = ctlr->dev.parent;
2164         struct boardinfo        *bi;
2165         int                     status = -ENODEV;
2166         int                     id, first_dynamic;
2167
2168         if (!dev)
2169                 return -ENODEV;
2170
2171         /*
2172          * Make sure all necessary hooks are implemented before registering
2173          * the SPI controller.
2174          */
2175         status = spi_controller_check_ops(ctlr);
2176         if (status)
2177                 return status;
2178
2179         if (!spi_controller_is_slave(ctlr)) {
2180                 status = of_spi_register_master(ctlr);
2181                 if (status)
2182                         return status;
2183         }
2184
2185         /* even if it's just one always-selected device, there must
2186          * be at least one chipselect
2187          */
2188         if (ctlr->num_chipselect == 0)
2189                 return -EINVAL;
2190         if (ctlr->bus_num >= 0) {
2191                 /* devices with a fixed bus num must check-in with the num */
2192                 mutex_lock(&board_lock);
2193                 id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
2194                         ctlr->bus_num + 1, GFP_KERNEL);
2195                 mutex_unlock(&board_lock);
2196                 if (WARN(id < 0, "couldn't get idr"))
2197                         return id == -ENOSPC ? -EBUSY : id;
2198                 ctlr->bus_num = id;
2199         } else if (ctlr->dev.of_node) {
2200                 /* allocate dynamic bus number using Linux idr */
2201                 id = of_alias_get_id(ctlr->dev.of_node, "spi");
2202                 if (id >= 0) {
2203                         ctlr->bus_num = id;
2204                         mutex_lock(&board_lock);
2205                         id = idr_alloc(&spi_master_idr, ctlr, ctlr->bus_num,
2206                                        ctlr->bus_num + 1, GFP_KERNEL);
2207                         mutex_unlock(&board_lock);
2208                         if (WARN(id < 0, "couldn't get idr"))
2209                                 return id == -ENOSPC ? -EBUSY : id;
2210                 }
2211         }
2212         if (ctlr->bus_num < 0) {
2213                 first_dynamic = of_alias_get_highest_id("spi");
2214                 if (first_dynamic < 0)
2215                         first_dynamic = 0;
2216                 else
2217                         first_dynamic++;
2218
2219                 mutex_lock(&board_lock);
2220                 id = idr_alloc(&spi_master_idr, ctlr, first_dynamic,
2221                                0, GFP_KERNEL);
2222                 mutex_unlock(&board_lock);
2223                 if (WARN(id < 0, "couldn't get idr"))
2224                         return id;
2225                 ctlr->bus_num = id;
2226         }
2227         INIT_LIST_HEAD(&ctlr->queue);
2228         spin_lock_init(&ctlr->queue_lock);
2229         spin_lock_init(&ctlr->bus_lock_spinlock);
2230         mutex_init(&ctlr->bus_lock_mutex);
2231         mutex_init(&ctlr->io_mutex);
2232         ctlr->bus_lock_flag = 0;
2233         init_completion(&ctlr->xfer_completion);
2234         if (!ctlr->max_dma_len)
2235                 ctlr->max_dma_len = INT_MAX;
2236
2237         /* register the device, then userspace will see it.
2238          * registration fails if the bus ID is in use.
2239          */
2240         dev_set_name(&ctlr->dev, "spi%u", ctlr->bus_num);
2241         status = device_add(&ctlr->dev);
2242         if (status < 0) {
2243                 /* free bus id */
2244                 mutex_lock(&board_lock);
2245                 idr_remove(&spi_master_idr, ctlr->bus_num);
2246                 mutex_unlock(&board_lock);
2247                 goto done;
2248         }
2249         dev_dbg(dev, "registered %s %s\n",
2250                         spi_controller_is_slave(ctlr) ? "slave" : "master",
2251                         dev_name(&ctlr->dev));
2252
2253         /*
2254          * If we're using a queued driver, start the queue. Note that we don't
2255          * need the queueing logic if the driver is only supporting high-level
2256          * memory operations.
2257          */
2258         if (ctlr->transfer) {
2259                 dev_info(dev, "controller is unqueued, this is deprecated\n");
2260         } else if (ctlr->transfer_one || ctlr->transfer_one_message) {
2261                 status = spi_controller_initialize_queue(ctlr);
2262                 if (status) {
2263                         device_del(&ctlr->dev);
2264                         /* free bus id */
2265                         mutex_lock(&board_lock);
2266                         idr_remove(&spi_master_idr, ctlr->bus_num);
2267                         mutex_unlock(&board_lock);
2268                         goto done;
2269                 }
2270         }
2271         /* add statistics */
2272         spin_lock_init(&ctlr->statistics.lock);
2273
2274         mutex_lock(&board_lock);
2275         list_add_tail(&ctlr->list, &spi_controller_list);
2276         list_for_each_entry(bi, &board_list, list)
2277                 spi_match_controller_to_boardinfo(ctlr, &bi->board_info);
2278         mutex_unlock(&board_lock);
2279
2280         /* Register devices from the device tree and ACPI */
2281         of_register_spi_devices(ctlr);
2282         acpi_register_spi_devices(ctlr);
2283 done:
2284         return status;
2285 }
2286 EXPORT_SYMBOL_GPL(spi_register_controller);
2287
2288 static void devm_spi_unregister(struct device *dev, void *res)
2289 {
2290         spi_unregister_controller(*(struct spi_controller **)res);
2291 }
2292
2293 /**
2294  * devm_spi_register_controller - register managed SPI master or slave
2295  *      controller
2296  * @dev:    device managing SPI controller
2297  * @ctlr: initialized controller, originally from spi_alloc_master() or
2298  *      spi_alloc_slave()
2299  * Context: can sleep
2300  *
2301  * Register a SPI device as with spi_register_controller() which will
2302  * automatically be unregistered and freed.
2303  *
2304  * Return: zero on success, else a negative error code.
2305  */
2306 int devm_spi_register_controller(struct device *dev,
2307                                  struct spi_controller *ctlr)
2308 {
2309         struct spi_controller **ptr;
2310         int ret;
2311
2312         ptr = devres_alloc(devm_spi_unregister, sizeof(*ptr), GFP_KERNEL);
2313         if (!ptr)
2314                 return -ENOMEM;
2315
2316         ret = spi_register_controller(ctlr);
2317         if (!ret) {
2318                 *ptr = ctlr;
2319                 devres_add(dev, ptr);
2320         } else {
2321                 devres_free(ptr);
2322         }
2323
2324         return ret;
2325 }
2326 EXPORT_SYMBOL_GPL(devm_spi_register_controller);
2327
2328 static int __unregister(struct device *dev, void *null)
2329 {
2330         spi_unregister_device(to_spi_device(dev));
2331         return 0;
2332 }
2333
2334 /**
2335  * spi_unregister_controller - unregister SPI master or slave controller
2336  * @ctlr: the controller being unregistered
2337  * Context: can sleep
2338  *
2339  * This call is used only by SPI controller drivers, which are the
2340  * only ones directly touching chip registers.
2341  *
2342  * This must be called from context that can sleep.
2343  *
2344  * Note that this function also drops a reference to the controller.
2345  */
2346 void spi_unregister_controller(struct spi_controller *ctlr)
2347 {
2348         struct spi_controller *found;
2349         int id = ctlr->bus_num;
2350         int dummy;
2351
2352         /* First make sure that this controller was ever added */
2353         mutex_lock(&board_lock);
2354         found = idr_find(&spi_master_idr, id);
2355         mutex_unlock(&board_lock);
2356         if (ctlr->queued) {
2357                 if (spi_destroy_queue(ctlr))
2358                         dev_err(&ctlr->dev, "queue remove failed\n");
2359         }
2360         mutex_lock(&board_lock);
2361         list_del(&ctlr->list);
2362         mutex_unlock(&board_lock);
2363
2364         dummy = device_for_each_child(&ctlr->dev, NULL, __unregister);
2365         device_unregister(&ctlr->dev);
2366         /* free bus id */
2367         mutex_lock(&board_lock);
2368         if (found == ctlr)
2369                 idr_remove(&spi_master_idr, id);
2370         mutex_unlock(&board_lock);
2371 }
2372 EXPORT_SYMBOL_GPL(spi_unregister_controller);
2373
2374 int spi_controller_suspend(struct spi_controller *ctlr)
2375 {
2376         int ret;
2377
2378         /* Basically no-ops for non-queued controllers */
2379         if (!ctlr->queued)
2380                 return 0;
2381
2382         ret = spi_stop_queue(ctlr);
2383         if (ret)
2384                 dev_err(&ctlr->dev, "queue stop failed\n");
2385
2386         return ret;
2387 }
2388 EXPORT_SYMBOL_GPL(spi_controller_suspend);
2389
2390 int spi_controller_resume(struct spi_controller *ctlr)
2391 {
2392         int ret;
2393
2394         if (!ctlr->queued)
2395                 return 0;
2396
2397         ret = spi_start_queue(ctlr);
2398         if (ret)
2399                 dev_err(&ctlr->dev, "queue restart failed\n");
2400
2401         return ret;
2402 }
2403 EXPORT_SYMBOL_GPL(spi_controller_resume);
2404
2405 static int __spi_controller_match(struct device *dev, const void *data)
2406 {
2407         struct spi_controller *ctlr;
2408         const u16 *bus_num = data;
2409
2410         ctlr = container_of(dev, struct spi_controller, dev);
2411         return ctlr->bus_num == *bus_num;
2412 }
2413
2414 /**
2415  * spi_busnum_to_master - look up master associated with bus_num
2416  * @bus_num: the master's bus number
2417  * Context: can sleep
2418  *
2419  * This call may be used with devices that are registered after
2420  * arch init time.  It returns a refcounted pointer to the relevant
2421  * spi_controller (which the caller must release), or NULL if there is
2422  * no such master registered.
2423  *
2424  * Return: the SPI master structure on success, else NULL.
2425  */
2426 struct spi_controller *spi_busnum_to_master(u16 bus_num)
2427 {
2428         struct device           *dev;
2429         struct spi_controller   *ctlr = NULL;
2430
2431         dev = class_find_device(&spi_master_class, NULL, &bus_num,
2432                                 __spi_controller_match);
2433         if (dev)
2434                 ctlr = container_of(dev, struct spi_controller, dev);
2435         /* reference got in class_find_device */
2436         return ctlr;
2437 }
2438 EXPORT_SYMBOL_GPL(spi_busnum_to_master);
2439
2440 /*-------------------------------------------------------------------------*/
2441
2442 /* Core methods for SPI resource management */
2443
2444 /**
2445  * spi_res_alloc - allocate a spi resource that is life-cycle managed
2446  *                 during the processing of a spi_message while using
2447  *                 spi_transfer_one
2448  * @spi:     the spi device for which we allocate memory
2449  * @release: the release code to execute for this resource
2450  * @size:    size to alloc and return
2451  * @gfp:     GFP allocation flags
2452  *
2453  * Return: the pointer to the allocated data
2454  *
2455  * This may get enhanced in the future to allocate from a memory pool
2456  * of the @spi_device or @spi_controller to avoid repeated allocations.
2457  */
2458 void *spi_res_alloc(struct spi_device *spi,
2459                     spi_res_release_t release,
2460                     size_t size, gfp_t gfp)
2461 {
2462         struct spi_res *sres;
2463
2464         sres = kzalloc(sizeof(*sres) + size, gfp);
2465         if (!sres)
2466                 return NULL;
2467
2468         INIT_LIST_HEAD(&sres->entry);
2469         sres->release = release;
2470
2471         return sres->data;
2472 }
2473 EXPORT_SYMBOL_GPL(spi_res_alloc);
2474
2475 /**
2476  * spi_res_free - free an spi resource
2477  * @res: pointer to the custom data of a resource
2478  *
2479  */
2480 void spi_res_free(void *res)
2481 {
2482         struct spi_res *sres = container_of(res, struct spi_res, data);
2483
2484         if (!res)
2485                 return;
2486
2487         WARN_ON(!list_empty(&sres->entry));
2488         kfree(sres);
2489 }
2490 EXPORT_SYMBOL_GPL(spi_res_free);
2491
2492 /**
2493  * spi_res_add - add a spi_res to the spi_message
2494  * @message: the spi message
2495  * @res:     the spi_resource
2496  */
2497 void spi_res_add(struct spi_message *message, void *res)
2498 {
2499         struct spi_res *sres = container_of(res, struct spi_res, data);
2500
2501         WARN_ON(!list_empty(&sres->entry));
2502         list_add_tail(&sres->entry, &message->resources);
2503 }
2504 EXPORT_SYMBOL_GPL(spi_res_add);
2505
2506 /**
2507  * spi_res_release - release all spi resources for this message
2508  * @ctlr:  the @spi_controller
2509  * @message: the @spi_message
2510  */
2511 void spi_res_release(struct spi_controller *ctlr, struct spi_message *message)
2512 {
2513         struct spi_res *res;
2514
2515         while (!list_empty(&message->resources)) {
2516                 res = list_last_entry(&message->resources,
2517                                       struct spi_res, entry);
2518
2519                 if (res->release)
2520                         res->release(ctlr, message, res->data);
2521
2522                 list_del(&res->entry);
2523
2524                 kfree(res);
2525         }
2526 }
2527 EXPORT_SYMBOL_GPL(spi_res_release);
2528
2529 /*-------------------------------------------------------------------------*/
2530
2531 /* Core methods for spi_message alterations */
2532
2533 static void __spi_replace_transfers_release(struct spi_controller *ctlr,
2534                                             struct spi_message *msg,
2535                                             void *res)
2536 {
2537         struct spi_replaced_transfers *rxfer = res;
2538         size_t i;
2539
2540         /* call extra callback if requested */
2541         if (rxfer->release)
2542                 rxfer->release(ctlr, msg, res);
2543
2544         /* insert replaced transfers back into the message */
2545         list_splice(&rxfer->replaced_transfers, rxfer->replaced_after);
2546
2547         /* remove the formerly inserted entries */
2548         for (i = 0; i < rxfer->inserted; i++)
2549                 list_del(&rxfer->inserted_transfers[i].transfer_list);
2550 }
2551
2552 /**
2553  * spi_replace_transfers - replace transfers with several transfers
2554  *                         and register change with spi_message.resources
2555  * @msg:           the spi_message we work upon
2556  * @xfer_first:    the first spi_transfer we want to replace
2557  * @remove:        number of transfers to remove
2558  * @insert:        the number of transfers we want to insert instead
2559  * @release:       extra release code necessary in some circumstances
2560  * @extradatasize: extra data to allocate (with alignment guarantees
2561  *                 of struct @spi_transfer)
2562  * @gfp:           gfp flags
2563  *
2564  * Returns: pointer to @spi_replaced_transfers,
2565  *          PTR_ERR(...) in case of errors.
2566  */
2567 struct spi_replaced_transfers *spi_replace_transfers(
2568         struct spi_message *msg,
2569         struct spi_transfer *xfer_first,
2570         size_t remove,
2571         size_t insert,
2572         spi_replaced_release_t release,
2573         size_t extradatasize,
2574         gfp_t gfp)
2575 {
2576         struct spi_replaced_transfers *rxfer;
2577         struct spi_transfer *xfer;
2578         size_t i;
2579
2580         /* allocate the structure using spi_res */
2581         rxfer = spi_res_alloc(msg->spi, __spi_replace_transfers_release,
2582                               insert * sizeof(struct spi_transfer)
2583                               + sizeof(struct spi_replaced_transfers)
2584                               + extradatasize,
2585                               gfp);
2586         if (!rxfer)
2587                 return ERR_PTR(-ENOMEM);
2588
2589         /* the release code to invoke before running the generic release */
2590         rxfer->release = release;
2591
2592         /* assign extradata */
2593         if (extradatasize)
2594                 rxfer->extradata =
2595                         &rxfer->inserted_transfers[insert];
2596
2597         /* init the replaced_transfers list */
2598         INIT_LIST_HEAD(&rxfer->replaced_transfers);
2599
2600         /* assign the list_entry after which we should reinsert
2601          * the @replaced_transfers - it may be spi_message.messages!
2602          */
2603         rxfer->replaced_after = xfer_first->transfer_list.prev;
2604
2605         /* remove the requested number of transfers */
2606         for (i = 0; i < remove; i++) {
2607                 /* if the entry after replaced_after it is msg->transfers
2608                  * then we have been requested to remove more transfers
2609                  * than are in the list
2610                  */
2611                 if (rxfer->replaced_after->next == &msg->transfers) {
2612                         dev_err(&msg->spi->dev,
2613                                 "requested to remove more spi_transfers than are available\n");
2614                         /* insert replaced transfers back into the message */
2615                         list_splice(&rxfer->replaced_transfers,
2616                                     rxfer->replaced_after);
2617
2618                         /* free the spi_replace_transfer structure */
2619                         spi_res_free(rxfer);
2620
2621                         /* and return with an error */
2622                         return ERR_PTR(-EINVAL);
2623                 }
2624
2625                 /* remove the entry after replaced_after from list of
2626                  * transfers and add it to list of replaced_transfers
2627                  */
2628                 list_move_tail(rxfer->replaced_after->next,
2629                                &rxfer->replaced_transfers);
2630         }
2631
2632         /* create copy of the given xfer with identical settings
2633          * based on the first transfer to get removed
2634          */
2635         for (i = 0; i < insert; i++) {
2636                 /* we need to run in reverse order */
2637                 xfer = &rxfer->inserted_transfers[insert - 1 - i];
2638
2639                 /* copy all spi_transfer data */
2640                 memcpy(xfer, xfer_first, sizeof(*xfer));
2641
2642                 /* add to list */
2643                 list_add(&xfer->transfer_list, rxfer->replaced_after);
2644
2645                 /* clear cs_change and delay_usecs for all but the last */
2646                 if (i) {
2647                         xfer->cs_change = false;
2648                         xfer->delay_usecs = 0;
2649                 }
2650         }
2651
2652         /* set up inserted */
2653         rxfer->inserted = insert;
2654
2655         /* and register it with spi_res/spi_message */
2656         spi_res_add(msg, rxfer);
2657
2658         return rxfer;
2659 }
2660 EXPORT_SYMBOL_GPL(spi_replace_transfers);
2661
2662 static int __spi_split_transfer_maxsize(struct spi_controller *ctlr,
2663                                         struct spi_message *msg,
2664                                         struct spi_transfer **xferp,
2665                                         size_t maxsize,
2666                                         gfp_t gfp)
2667 {
2668         struct spi_transfer *xfer = *xferp, *xfers;
2669         struct spi_replaced_transfers *srt;
2670         size_t offset;
2671         size_t count, i;
2672
2673         /* warn once about this fact that we are splitting a transfer */
2674         dev_warn_once(&msg->spi->dev,
2675                       "spi_transfer of length %i exceed max length of %zu - needed to split transfers\n",
2676                       xfer->len, maxsize);
2677
2678         /* calculate how many we have to replace */
2679         count = DIV_ROUND_UP(xfer->len, maxsize);
2680
2681         /* create replacement */
2682         srt = spi_replace_transfers(msg, xfer, 1, count, NULL, 0, gfp);
2683         if (IS_ERR(srt))
2684                 return PTR_ERR(srt);
2685         xfers = srt->inserted_transfers;
2686
2687         /* now handle each of those newly inserted spi_transfers
2688          * note that the replacements spi_transfers all are preset
2689          * to the same values as *xferp, so tx_buf, rx_buf and len
2690          * are all identical (as well as most others)
2691          * so we just have to fix up len and the pointers.
2692          *
2693          * this also includes support for the depreciated
2694          * spi_message.is_dma_mapped interface
2695          */
2696
2697         /* the first transfer just needs the length modified, so we
2698          * run it outside the loop
2699          */
2700         xfers[0].len = min_t(size_t, maxsize, xfer[0].len);
2701
2702         /* all the others need rx_buf/tx_buf also set */
2703         for (i = 1, offset = maxsize; i < count; offset += maxsize, i++) {
2704                 /* update rx_buf, tx_buf and dma */
2705                 if (xfers[i].rx_buf)
2706                         xfers[i].rx_buf += offset;
2707                 if (xfers[i].rx_dma)
2708                         xfers[i].rx_dma += offset;
2709                 if (xfers[i].tx_buf)
2710                         xfers[i].tx_buf += offset;
2711                 if (xfers[i].tx_dma)
2712                         xfers[i].tx_dma += offset;
2713
2714                 /* update length */
2715                 xfers[i].len = min(maxsize, xfers[i].len - offset);
2716         }
2717
2718         /* we set up xferp to the last entry we have inserted,
2719          * so that we skip those already split transfers
2720          */
2721         *xferp = &xfers[count - 1];
2722
2723         /* increment statistics counters */
2724         SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics,
2725                                        transfers_split_maxsize);
2726         SPI_STATISTICS_INCREMENT_FIELD(&msg->spi->statistics,
2727                                        transfers_split_maxsize);
2728
2729         return 0;
2730 }
2731
2732 /**
2733  * spi_split_tranfers_maxsize - split spi transfers into multiple transfers
2734  *                              when an individual transfer exceeds a
2735  *                              certain size
2736  * @ctlr:    the @spi_controller for this transfer
2737  * @msg:   the @spi_message to transform
2738  * @maxsize:  the maximum when to apply this
2739  * @gfp: GFP allocation flags
2740  *
2741  * Return: status of transformation
2742  */
2743 int spi_split_transfers_maxsize(struct spi_controller *ctlr,
2744                                 struct spi_message *msg,
2745                                 size_t maxsize,
2746                                 gfp_t gfp)
2747 {
2748         struct spi_transfer *xfer;
2749         int ret;
2750
2751         /* iterate over the transfer_list,
2752          * but note that xfer is advanced to the last transfer inserted
2753          * to avoid checking sizes again unnecessarily (also xfer does
2754          * potentiall belong to a different list by the time the
2755          * replacement has happened
2756          */
2757         list_for_each_entry(xfer, &msg->transfers, transfer_list) {
2758                 if (xfer->len > maxsize) {
2759                         ret = __spi_split_transfer_maxsize(ctlr, msg, &xfer,
2760                                                            maxsize, gfp);
2761                         if (ret)
2762                                 return ret;
2763                 }
2764         }
2765
2766         return 0;
2767 }
2768 EXPORT_SYMBOL_GPL(spi_split_transfers_maxsize);
2769
2770 /*-------------------------------------------------------------------------*/
2771
2772 /* Core methods for SPI controller protocol drivers.  Some of the
2773  * other core methods are currently defined as inline functions.
2774  */
2775
2776 static int __spi_validate_bits_per_word(struct spi_controller *ctlr,
2777                                         u8 bits_per_word)
2778 {
2779         if (ctlr->bits_per_word_mask) {
2780                 /* Only 32 bits fit in the mask */
2781                 if (bits_per_word > 32)
2782                         return -EINVAL;
2783                 if (!(ctlr->bits_per_word_mask & SPI_BPW_MASK(bits_per_word)))
2784                         return -EINVAL;
2785         }
2786
2787         return 0;
2788 }
2789
2790 /**
2791  * spi_setup - setup SPI mode and clock rate
2792  * @spi: the device whose settings are being modified
2793  * Context: can sleep, and no requests are queued to the device
2794  *
2795  * SPI protocol drivers may need to update the transfer mode if the
2796  * device doesn't work with its default.  They may likewise need
2797  * to update clock rates or word sizes from initial values.  This function
2798  * changes those settings, and must be called from a context that can sleep.
2799  * Except for SPI_CS_HIGH, which takes effect immediately, the changes take
2800  * effect the next time the device is selected and data is transferred to
2801  * or from it.  When this function returns, the spi device is deselected.
2802  *
2803  * Note that this call will fail if the protocol driver specifies an option
2804  * that the underlying controller or its driver does not support.  For
2805  * example, not all hardware supports wire transfers using nine bit words,
2806  * LSB-first wire encoding, or active-high chipselects.
2807  *
2808  * Return: zero on success, else a negative error code.
2809  */
2810 int spi_setup(struct spi_device *spi)
2811 {
2812         unsigned        bad_bits, ugly_bits;
2813         int             status;
2814
2815         /* check mode to prevent that DUAL and QUAD set at the same time
2816          */
2817         if (((spi->mode & SPI_TX_DUAL) && (spi->mode & SPI_TX_QUAD)) ||
2818                 ((spi->mode & SPI_RX_DUAL) && (spi->mode & SPI_RX_QUAD))) {
2819                 dev_err(&spi->dev,
2820                 "setup: can not select dual and quad at the same time\n");
2821                 return -EINVAL;
2822         }
2823         /* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden
2824          */
2825         if ((spi->mode & SPI_3WIRE) && (spi->mode &
2826                 (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)))
2827                 return -EINVAL;
2828         /* help drivers fail *cleanly* when they need options
2829          * that aren't supported with their current controller
2830          * SPI_CS_WORD has a fallback software implementation,
2831          * so it is ignored here.
2832          */
2833         bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD);
2834         ugly_bits = bad_bits &
2835                     (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD);
2836         if (ugly_bits) {
2837                 dev_warn(&spi->dev,
2838                          "setup: ignoring unsupported mode bits %x\n",
2839                          ugly_bits);
2840                 spi->mode &= ~ugly_bits;
2841                 bad_bits &= ~ugly_bits;
2842         }
2843         if (bad_bits) {
2844                 dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
2845                         bad_bits);
2846                 return -EINVAL;
2847         }
2848
2849         if (!spi->bits_per_word)
2850                 spi->bits_per_word = 8;
2851
2852         status = __spi_validate_bits_per_word(spi->controller,
2853                                               spi->bits_per_word);
2854         if (status)
2855                 return status;
2856
2857         if (!spi->max_speed_hz)
2858                 spi->max_speed_hz = spi->controller->max_speed_hz;
2859
2860         if (spi->controller->setup)
2861                 status = spi->controller->setup(spi);
2862
2863         spi_set_cs(spi, false);
2864
2865         dev_dbg(&spi->dev, "setup mode %d, %s%s%s%s%u bits/w, %u Hz max --> %d\n",
2866                         (int) (spi->mode & (SPI_CPOL | SPI_CPHA)),
2867                         (spi->mode & SPI_CS_HIGH) ? "cs_high, " : "",
2868                         (spi->mode & SPI_LSB_FIRST) ? "lsb, " : "",
2869                         (spi->mode & SPI_3WIRE) ? "3wire, " : "",
2870                         (spi->mode & SPI_LOOP) ? "loopback, " : "",
2871                         spi->bits_per_word, spi->max_speed_hz,
2872                         status);
2873
2874         return status;
2875 }
2876 EXPORT_SYMBOL_GPL(spi_setup);
2877
2878 static int __spi_validate(struct spi_device *spi, struct spi_message *message)
2879 {
2880         struct spi_controller *ctlr = spi->controller;
2881         struct spi_transfer *xfer;
2882         int w_size;
2883
2884         if (list_empty(&message->transfers))
2885                 return -EINVAL;
2886
2887         /* If an SPI controller does not support toggling the CS line on each
2888          * transfer (indicated by the SPI_CS_WORD flag) or we are using a GPIO
2889          * for the CS line, we can emulate the CS-per-word hardware function by
2890          * splitting transfers into one-word transfers and ensuring that
2891          * cs_change is set for each transfer.
2892          */
2893         if ((spi->mode & SPI_CS_WORD) && (!(ctlr->mode_bits & SPI_CS_WORD) ||
2894                                           gpio_is_valid(spi->cs_gpio))) {
2895                 size_t maxsize;
2896                 int ret;
2897
2898                 maxsize = (spi->bits_per_word + 7) / 8;
2899
2900                 /* spi_split_transfers_maxsize() requires message->spi */
2901                 message->spi = spi;
2902
2903                 ret = spi_split_transfers_maxsize(ctlr, message, maxsize,
2904                                                   GFP_KERNEL);
2905                 if (ret)
2906                         return ret;
2907
2908                 list_for_each_entry(xfer, &message->transfers, transfer_list) {
2909                         /* don't change cs_change on the last entry in the list */
2910                         if (list_is_last(&xfer->transfer_list, &message->transfers))
2911                                 break;
2912                         xfer->cs_change = 1;
2913                 }
2914         }
2915
2916         /* Half-duplex links include original MicroWire, and ones with
2917          * only one data pin like SPI_3WIRE (switches direction) or where
2918          * either MOSI or MISO is missing.  They can also be caused by
2919          * software limitations.
2920          */
2921         if ((ctlr->flags & SPI_CONTROLLER_HALF_DUPLEX) ||
2922             (spi->mode & SPI_3WIRE)) {
2923                 unsigned flags = ctlr->flags;
2924
2925                 list_for_each_entry(xfer, &message->transfers, transfer_list) {
2926                         if (xfer->rx_buf && xfer->tx_buf)
2927                                 return -EINVAL;
2928                         if ((flags & SPI_CONTROLLER_NO_TX) && xfer->tx_buf)
2929                                 return -EINVAL;
2930                         if ((flags & SPI_CONTROLLER_NO_RX) && xfer->rx_buf)
2931                                 return -EINVAL;
2932                 }
2933         }
2934
2935         /**
2936          * Set transfer bits_per_word and max speed as spi device default if
2937          * it is not set for this transfer.
2938          * Set transfer tx_nbits and rx_nbits as single transfer default
2939          * (SPI_NBITS_SINGLE) if it is not set for this transfer.
2940          */
2941         message->frame_length = 0;
2942         list_for_each_entry(xfer, &message->transfers, transfer_list) {
2943                 message->frame_length += xfer->len;
2944                 if (!xfer->bits_per_word)
2945                         xfer->bits_per_word = spi->bits_per_word;
2946
2947                 if (!xfer->speed_hz)
2948                         xfer->speed_hz = spi->max_speed_hz;
2949                 if (!xfer->speed_hz)
2950                         xfer->speed_hz = ctlr->max_speed_hz;
2951
2952                 if (ctlr->max_speed_hz && xfer->speed_hz > ctlr->max_speed_hz)
2953                         xfer->speed_hz = ctlr->max_speed_hz;
2954
2955                 if (__spi_validate_bits_per_word(ctlr, xfer->bits_per_word))
2956                         return -EINVAL;
2957
2958                 /*
2959                  * SPI transfer length should be multiple of SPI word size
2960                  * where SPI word size should be power-of-two multiple
2961                  */
2962                 if (xfer->bits_per_word <= 8)
2963                         w_size = 1;
2964                 else if (xfer->bits_per_word <= 16)
2965                         w_size = 2;
2966                 else
2967                         w_size = 4;
2968
2969                 /* No partial transfers accepted */
2970                 if (xfer->len % w_size)
2971                         return -EINVAL;
2972
2973                 if (xfer->speed_hz && ctlr->min_speed_hz &&
2974                     xfer->speed_hz < ctlr->min_speed_hz)
2975                         return -EINVAL;
2976
2977                 if (xfer->tx_buf && !xfer->tx_nbits)
2978                         xfer->tx_nbits = SPI_NBITS_SINGLE;
2979                 if (xfer->rx_buf && !xfer->rx_nbits)
2980                         xfer->rx_nbits = SPI_NBITS_SINGLE;
2981                 /* check transfer tx/rx_nbits:
2982                  * 1. check the value matches one of single, dual and quad
2983                  * 2. check tx/rx_nbits match the mode in spi_device
2984                  */
2985                 if (xfer->tx_buf) {
2986                         if (xfer->tx_nbits != SPI_NBITS_SINGLE &&
2987                                 xfer->tx_nbits != SPI_NBITS_DUAL &&
2988                                 xfer->tx_nbits != SPI_NBITS_QUAD)
2989                                 return -EINVAL;
2990                         if ((xfer->tx_nbits == SPI_NBITS_DUAL) &&
2991                                 !(spi->mode & (SPI_TX_DUAL | SPI_TX_QUAD)))
2992                                 return -EINVAL;
2993                         if ((xfer->tx_nbits == SPI_NBITS_QUAD) &&
2994                                 !(spi->mode & SPI_TX_QUAD))
2995                                 return -EINVAL;
2996                 }
2997                 /* check transfer rx_nbits */
2998                 if (xfer->rx_buf) {
2999                         if (xfer->rx_nbits != SPI_NBITS_SINGLE &&
3000                                 xfer->rx_nbits != SPI_NBITS_DUAL &&
3001                                 xfer->rx_nbits != SPI_NBITS_QUAD)
3002                                 return -EINVAL;
3003                         if ((xfer->rx_nbits == SPI_NBITS_DUAL) &&
3004                                 !(spi->mode & (SPI_RX_DUAL | SPI_RX_QUAD)))
3005                                 return -EINVAL;
3006                         if ((xfer->rx_nbits == SPI_NBITS_QUAD) &&
3007                                 !(spi->mode & SPI_RX_QUAD))
3008                                 return -EINVAL;
3009                 }
3010         }
3011
3012         message->status = -EINPROGRESS;
3013
3014         return 0;
3015 }
3016
3017 static int __spi_async(struct spi_device *spi, struct spi_message *message)
3018 {
3019         struct spi_controller *ctlr = spi->controller;
3020
3021         /*
3022          * Some controllers do not support doing regular SPI transfers. Return
3023          * ENOTSUPP when this is the case.
3024          */
3025         if (!ctlr->transfer)
3026                 return -ENOTSUPP;
3027
3028         message->spi = spi;
3029
3030         SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics, spi_async);
3031         SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_async);
3032
3033         trace_spi_message_submit(message);
3034
3035         return ctlr->transfer(spi, message);
3036 }
3037
3038 /**
3039  * spi_async - asynchronous SPI transfer
3040  * @spi: device with which data will be exchanged
3041  * @message: describes the data transfers, including completion callback
3042  * Context: any (irqs may be blocked, etc)
3043  *
3044  * This call may be used in_irq and other contexts which can't sleep,
3045  * as well as from task contexts which can sleep.
3046  *
3047  * The completion callback is invoked in a context which can't sleep.
3048  * Before that invocation, the value of message->status is undefined.
3049  * When the callback is issued, message->status holds either zero (to
3050  * indicate complete success) or a negative error code.  After that
3051  * callback returns, the driver which issued the transfer request may
3052  * deallocate the associated memory; it's no longer in use by any SPI
3053  * core or controller driver code.
3054  *
3055  * Note that although all messages to a spi_device are handled in
3056  * FIFO order, messages may go to different devices in other orders.
3057  * Some device might be higher priority, or have various "hard" access
3058  * time requirements, for example.
3059  *
3060  * On detection of any fault during the transfer, processing of
3061  * the entire message is aborted, and the device is deselected.
3062  * Until returning from the associated message completion callback,
3063  * no other spi_message queued to that device will be processed.
3064  * (This rule applies equally to all the synchronous transfer calls,
3065  * which are wrappers around this core asynchronous primitive.)
3066  *
3067  * Return: zero on success, else a negative error code.
3068  */
3069 int spi_async(struct spi_device *spi, struct spi_message *message)
3070 {
3071         struct spi_controller *ctlr = spi->controller;
3072         int ret;
3073         unsigned long flags;
3074
3075         ret = __spi_validate(spi, message);
3076         if (ret != 0)
3077                 return ret;
3078
3079         spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
3080
3081         if (ctlr->bus_lock_flag)
3082                 ret = -EBUSY;
3083         else
3084                 ret = __spi_async(spi, message);
3085
3086         spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
3087
3088         return ret;
3089 }
3090 EXPORT_SYMBOL_GPL(spi_async);
3091
3092 /**
3093  * spi_async_locked - version of spi_async with exclusive bus usage
3094  * @spi: device with which data will be exchanged
3095  * @message: describes the data transfers, including completion callback
3096  * Context: any (irqs may be blocked, etc)
3097  *
3098  * This call may be used in_irq and other contexts which can't sleep,
3099  * as well as from task contexts which can sleep.
3100  *
3101  * The completion callback is invoked in a context which can't sleep.
3102  * Before that invocation, the value of message->status is undefined.
3103  * When the callback is issued, message->status holds either zero (to
3104  * indicate complete success) or a negative error code.  After that
3105  * callback returns, the driver which issued the transfer request may
3106  * deallocate the associated memory; it's no longer in use by any SPI
3107  * core or controller driver code.
3108  *
3109  * Note that although all messages to a spi_device are handled in
3110  * FIFO order, messages may go to different devices in other orders.
3111  * Some device might be higher priority, or have various "hard" access
3112  * time requirements, for example.
3113  *
3114  * On detection of any fault during the transfer, processing of
3115  * the entire message is aborted, and the device is deselected.
3116  * Until returning from the associated message completion callback,
3117  * no other spi_message queued to that device will be processed.
3118  * (This rule applies equally to all the synchronous transfer calls,
3119  * which are wrappers around this core asynchronous primitive.)
3120  *
3121  * Return: zero on success, else a negative error code.
3122  */
3123 int spi_async_locked(struct spi_device *spi, struct spi_message *message)
3124 {
3125         struct spi_controller *ctlr = spi->controller;
3126         int ret;
3127         unsigned long flags;
3128
3129         ret = __spi_validate(spi, message);
3130         if (ret != 0)
3131                 return ret;
3132
3133         spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
3134
3135         ret = __spi_async(spi, message);
3136
3137         spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
3138
3139         return ret;
3140
3141 }
3142 EXPORT_SYMBOL_GPL(spi_async_locked);
3143
3144 /*-------------------------------------------------------------------------*/
3145
3146 /* Utility methods for SPI protocol drivers, layered on
3147  * top of the core.  Some other utility methods are defined as
3148  * inline functions.
3149  */
3150
3151 static void spi_complete(void *arg)
3152 {
3153         complete(arg);
3154 }
3155
3156 static int __spi_sync(struct spi_device *spi, struct spi_message *message)
3157 {
3158         DECLARE_COMPLETION_ONSTACK(done);
3159         int status;
3160         struct spi_controller *ctlr = spi->controller;
3161         unsigned long flags;
3162
3163         status = __spi_validate(spi, message);
3164         if (status != 0)
3165                 return status;
3166
3167         message->complete = spi_complete;
3168         message->context = &done;
3169         message->spi = spi;
3170
3171         SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics, spi_sync);
3172         SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics, spi_sync);
3173
3174         /* If we're not using the legacy transfer method then we will
3175          * try to transfer in the calling context so special case.
3176          * This code would be less tricky if we could remove the
3177          * support for driver implemented message queues.
3178          */
3179         if (ctlr->transfer == spi_queued_transfer) {
3180                 spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
3181
3182                 trace_spi_message_submit(message);
3183
3184                 status = __spi_queued_transfer(spi, message, false);
3185
3186                 spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
3187         } else {
3188                 status = spi_async_locked(spi, message);
3189         }
3190
3191         if (status == 0) {
3192                 /* Push out the messages in the calling context if we
3193                  * can.
3194                  */
3195                 if (ctlr->transfer == spi_queued_transfer) {
3196                         SPI_STATISTICS_INCREMENT_FIELD(&ctlr->statistics,
3197                                                        spi_sync_immediate);
3198                         SPI_STATISTICS_INCREMENT_FIELD(&spi->statistics,
3199                                                        spi_sync_immediate);
3200                         __spi_pump_messages(ctlr, false);
3201                 }
3202
3203                 wait_for_completion(&done);
3204                 status = message->status;
3205         }
3206         message->context = NULL;
3207         return status;
3208 }
3209
3210 /**
3211  * spi_sync - blocking/synchronous SPI data transfers
3212  * @spi: device with which data will be exchanged
3213  * @message: describes the data transfers
3214  * Context: can sleep
3215  *
3216  * This call may only be used from a context that may sleep.  The sleep
3217  * is non-interruptible, and has no timeout.  Low-overhead controller
3218  * drivers may DMA directly into and out of the message buffers.
3219  *
3220  * Note that the SPI device's chip select is active during the message,
3221  * and then is normally disabled between messages.  Drivers for some
3222  * frequently-used devices may want to minimize costs of selecting a chip,
3223  * by leaving it selected in anticipation that the next message will go
3224  * to the same chip.  (That may increase power usage.)
3225  *
3226  * Also, the caller is guaranteeing that the memory associated with the
3227  * message will not be freed before this call returns.
3228  *
3229  * Return: zero on success, else a negative error code.
3230  */
3231 int spi_sync(struct spi_device *spi, struct spi_message *message)
3232 {
3233         int ret;
3234
3235         mutex_lock(&spi->controller->bus_lock_mutex);
3236         ret = __spi_sync(spi, message);
3237         mutex_unlock(&spi->controller->bus_lock_mutex);
3238
3239         return ret;
3240 }
3241 EXPORT_SYMBOL_GPL(spi_sync);
3242
3243 /**
3244  * spi_sync_locked - version of spi_sync with exclusive bus usage
3245  * @spi: device with which data will be exchanged
3246  * @message: describes the data transfers
3247  * Context: can sleep
3248  *
3249  * This call may only be used from a context that may sleep.  The sleep
3250  * is non-interruptible, and has no timeout.  Low-overhead controller
3251  * drivers may DMA directly into and out of the message buffers.
3252  *
3253  * This call should be used by drivers that require exclusive access to the
3254  * SPI bus. It has to be preceded by a spi_bus_lock call. The SPI bus must
3255  * be released by a spi_bus_unlock call when the exclusive access is over.
3256  *
3257  * Return: zero on success, else a negative error code.
3258  */
3259 int spi_sync_locked(struct spi_device *spi, struct spi_message *message)
3260 {
3261         return __spi_sync(spi, message);
3262 }
3263 EXPORT_SYMBOL_GPL(spi_sync_locked);
3264
3265 /**
3266  * spi_bus_lock - obtain a lock for exclusive SPI bus usage
3267  * @ctlr: SPI bus master that should be locked for exclusive bus access
3268  * Context: can sleep
3269  *
3270  * This call may only be used from a context that may sleep.  The sleep
3271  * is non-interruptible, and has no timeout.
3272  *
3273  * This call should be used by drivers that require exclusive access to the
3274  * SPI bus. The SPI bus must be released by a spi_bus_unlock call when the
3275  * exclusive access is over. Data transfer must be done by spi_sync_locked
3276  * and spi_async_locked calls when the SPI bus lock is held.
3277  *
3278  * Return: always zero.
3279  */
3280 int spi_bus_lock(struct spi_controller *ctlr)
3281 {
3282         unsigned long flags;
3283
3284         mutex_lock(&ctlr->bus_lock_mutex);
3285
3286         spin_lock_irqsave(&ctlr->bus_lock_spinlock, flags);
3287         ctlr->bus_lock_flag = 1;
3288         spin_unlock_irqrestore(&ctlr->bus_lock_spinlock, flags);
3289
3290         /* mutex remains locked until spi_bus_unlock is called */
3291
3292         return 0;
3293 }
3294 EXPORT_SYMBOL_GPL(spi_bus_lock);
3295
3296 /**
3297  * spi_bus_unlock - release the lock for exclusive SPI bus usage
3298  * @ctlr: SPI bus master that was locked for exclusive bus access
3299  * Context: can sleep
3300  *
3301  * This call may only be used from a context that may sleep.  The sleep
3302  * is non-interruptible, and has no timeout.
3303  *
3304  * This call releases an SPI bus lock previously obtained by an spi_bus_lock
3305  * call.
3306  *
3307  * Return: always zero.
3308  */
3309 int spi_bus_unlock(struct spi_controller *ctlr)
3310 {
3311         ctlr->bus_lock_flag = 0;
3312
3313         mutex_unlock(&ctlr->bus_lock_mutex);
3314
3315         return 0;
3316 }
3317 EXPORT_SYMBOL_GPL(spi_bus_unlock);
3318
3319 /* portable code must never pass more than 32 bytes */
3320 #define SPI_BUFSIZ      max(32, SMP_CACHE_BYTES)
3321
3322 static u8       *buf;
3323
3324 /**
3325  * spi_write_then_read - SPI synchronous write followed by read
3326  * @spi: device with which data will be exchanged
3327  * @txbuf: data to be written (need not be dma-safe)
3328  * @n_tx: size of txbuf, in bytes
3329  * @rxbuf: buffer into which data will be read (need not be dma-safe)
3330  * @n_rx: size of rxbuf, in bytes
3331  * Context: can sleep
3332  *
3333  * This performs a half duplex MicroWire style transaction with the
3334  * device, sending txbuf and then reading rxbuf.  The return value
3335  * is zero for success, else a negative errno status code.
3336  * This call may only be used from a context that may sleep.
3337  *
3338  * Parameters to this routine are always copied using a small buffer;
3339  * portable code should never use this for more than 32 bytes.
3340  * Performance-sensitive or bulk transfer code should instead use
3341  * spi_{async,sync}() calls with dma-safe buffers.
3342  *
3343  * Return: zero on success, else a negative error code.
3344  */
3345 int spi_write_then_read(struct spi_device *spi,
3346                 const void *txbuf, unsigned n_tx,
3347                 void *rxbuf, unsigned n_rx)
3348 {
3349         static DEFINE_MUTEX(lock);
3350
3351         int                     status;
3352         struct spi_message      message;
3353         struct spi_transfer     x[2];
3354         u8                      *local_buf;
3355
3356         /* Use preallocated DMA-safe buffer if we can.  We can't avoid
3357          * copying here, (as a pure convenience thing), but we can
3358          * keep heap costs out of the hot path unless someone else is
3359          * using the pre-allocated buffer or the transfer is too large.
3360          */
3361         if ((n_tx + n_rx) > SPI_BUFSIZ || !mutex_trylock(&lock)) {
3362                 local_buf = kmalloc(max((unsigned)SPI_BUFSIZ, n_tx + n_rx),
3363                                     GFP_KERNEL | GFP_DMA);
3364                 if (!local_buf)
3365                         return -ENOMEM;
3366         } else {
3367                 local_buf = buf;
3368         }
3369
3370         spi_message_init(&message);
3371         memset(x, 0, sizeof(x));
3372         if (n_tx) {
3373                 x[0].len = n_tx;
3374                 spi_message_add_tail(&x[0], &message);
3375         }
3376         if (n_rx) {
3377                 x[1].len = n_rx;
3378                 spi_message_add_tail(&x[1], &message);
3379         }
3380
3381         memcpy(local_buf, txbuf, n_tx);
3382         x[0].tx_buf = local_buf;
3383         x[1].rx_buf = local_buf + n_tx;
3384
3385         /* do the i/o */
3386         status = spi_sync(spi, &message);
3387         if (status == 0)
3388                 memcpy(rxbuf, x[1].rx_buf, n_rx);
3389
3390         if (x[0].tx_buf == buf)
3391                 mutex_unlock(&lock);
3392         else
3393                 kfree(local_buf);
3394
3395         return status;
3396 }
3397 EXPORT_SYMBOL_GPL(spi_write_then_read);
3398
3399 /*-------------------------------------------------------------------------*/
3400
3401 #if IS_ENABLED(CONFIG_OF)
3402 static int __spi_of_device_match(struct device *dev, void *data)
3403 {
3404         return dev->of_node == data;
3405 }
3406
3407 /* must call put_device() when done with returned spi_device device */
3408 struct spi_device *of_find_spi_device_by_node(struct device_node *node)
3409 {
3410         struct device *dev = bus_find_device(&spi_bus_type, NULL, node,
3411                                                 __spi_of_device_match);
3412         return dev ? to_spi_device(dev) : NULL;
3413 }
3414 EXPORT_SYMBOL_GPL(of_find_spi_device_by_node);
3415 #endif /* IS_ENABLED(CONFIG_OF) */
3416
3417 #if IS_ENABLED(CONFIG_OF_DYNAMIC)
3418 static int __spi_of_controller_match(struct device *dev, const void *data)
3419 {
3420         return dev->of_node == data;
3421 }
3422
3423 /* the spi controllers are not using spi_bus, so we find it with another way */
3424 static struct spi_controller *of_find_spi_controller_by_node(struct device_node *node)
3425 {
3426         struct device *dev;
3427
3428         dev = class_find_device(&spi_master_class, NULL, node,
3429                                 __spi_of_controller_match);
3430         if (!dev && IS_ENABLED(CONFIG_SPI_SLAVE))
3431                 dev = class_find_device(&spi_slave_class, NULL, node,
3432                                         __spi_of_controller_match);
3433         if (!dev)
3434                 return NULL;
3435
3436         /* reference got in class_find_device */
3437         return container_of(dev, struct spi_controller, dev);
3438 }
3439
3440 static int of_spi_notify(struct notifier_block *nb, unsigned long action,
3441                          void *arg)
3442 {
3443         struct of_reconfig_data *rd = arg;
3444         struct spi_controller *ctlr;
3445         struct spi_device *spi;
3446
3447         switch (of_reconfig_get_state_change(action, arg)) {
3448         case OF_RECONFIG_CHANGE_ADD:
3449                 ctlr = of_find_spi_controller_by_node(rd->dn->parent);
3450                 if (ctlr == NULL)
3451                         return NOTIFY_OK;       /* not for us */
3452
3453                 if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
3454                         put_device(&ctlr->dev);
3455                         return NOTIFY_OK;
3456                 }
3457
3458                 spi = of_register_spi_device(ctlr, rd->dn);
3459                 put_device(&ctlr->dev);
3460
3461                 if (IS_ERR(spi)) {
3462                         pr_err("%s: failed to create for '%pOF'\n",
3463                                         __func__, rd->dn);
3464                         of_node_clear_flag(rd->dn, OF_POPULATED);
3465                         return notifier_from_errno(PTR_ERR(spi));
3466                 }
3467                 break;
3468
3469         case OF_RECONFIG_CHANGE_REMOVE:
3470                 /* already depopulated? */
3471                 if (!of_node_check_flag(rd->dn, OF_POPULATED))
3472                         return NOTIFY_OK;
3473
3474                 /* find our device by node */
3475                 spi = of_find_spi_device_by_node(rd->dn);
3476                 if (spi == NULL)
3477                         return NOTIFY_OK;       /* no? not meant for us */
3478
3479                 /* unregister takes one ref away */
3480                 spi_unregister_device(spi);
3481
3482                 /* and put the reference of the find */
3483                 put_device(&spi->dev);
3484                 break;
3485         }
3486
3487         return NOTIFY_OK;
3488 }
3489
3490 static struct notifier_block spi_of_notifier = {
3491         .notifier_call = of_spi_notify,
3492 };
3493 #else /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
3494 extern struct notifier_block spi_of_notifier;
3495 #endif /* IS_ENABLED(CONFIG_OF_DYNAMIC) */
3496
3497 #if IS_ENABLED(CONFIG_ACPI)
3498 static int spi_acpi_controller_match(struct device *dev, const void *data)
3499 {
3500         return ACPI_COMPANION(dev->parent) == data;
3501 }
3502
3503 static int spi_acpi_device_match(struct device *dev, void *data)
3504 {
3505         return ACPI_COMPANION(dev) == data;
3506 }
3507
3508 static struct spi_controller *acpi_spi_find_controller_by_adev(struct acpi_device *adev)
3509 {
3510         struct device *dev;
3511
3512         dev = class_find_device(&spi_master_class, NULL, adev,
3513                                 spi_acpi_controller_match);
3514         if (!dev && IS_ENABLED(CONFIG_SPI_SLAVE))
3515                 dev = class_find_device(&spi_slave_class, NULL, adev,
3516                                         spi_acpi_controller_match);
3517         if (!dev)
3518                 return NULL;
3519
3520         return container_of(dev, struct spi_controller, dev);
3521 }
3522
3523 static struct spi_device *acpi_spi_find_device_by_adev(struct acpi_device *adev)
3524 {
3525         struct device *dev;
3526
3527         dev = bus_find_device(&spi_bus_type, NULL, adev, spi_acpi_device_match);
3528
3529         return dev ? to_spi_device(dev) : NULL;
3530 }
3531
3532 static int acpi_spi_notify(struct notifier_block *nb, unsigned long value,
3533                            void *arg)
3534 {
3535         struct acpi_device *adev = arg;
3536         struct spi_controller *ctlr;
3537         struct spi_device *spi;
3538
3539         switch (value) {
3540         case ACPI_RECONFIG_DEVICE_ADD:
3541                 ctlr = acpi_spi_find_controller_by_adev(adev->parent);
3542                 if (!ctlr)
3543                         break;
3544
3545                 acpi_register_spi_device(ctlr, adev);
3546                 put_device(&ctlr->dev);
3547                 break;
3548         case ACPI_RECONFIG_DEVICE_REMOVE:
3549                 if (!acpi_device_enumerated(adev))
3550                         break;
3551
3552                 spi = acpi_spi_find_device_by_adev(adev);
3553                 if (!spi)
3554                         break;
3555
3556                 spi_unregister_device(spi);
3557                 put_device(&spi->dev);
3558                 break;
3559         }
3560
3561         return NOTIFY_OK;
3562 }
3563
3564 static struct notifier_block spi_acpi_notifier = {
3565         .notifier_call = acpi_spi_notify,
3566 };
3567 #else
3568 extern struct notifier_block spi_acpi_notifier;
3569 #endif
3570
3571 static int __init spi_init(void)
3572 {
3573         int     status;
3574
3575         buf = kmalloc(SPI_BUFSIZ, GFP_KERNEL);
3576         if (!buf) {
3577                 status = -ENOMEM;
3578                 goto err0;
3579         }
3580
3581         status = bus_register(&spi_bus_type);
3582         if (status < 0)
3583                 goto err1;
3584
3585         status = class_register(&spi_master_class);
3586         if (status < 0)
3587                 goto err2;
3588
3589         if (IS_ENABLED(CONFIG_SPI_SLAVE)) {
3590                 status = class_register(&spi_slave_class);
3591                 if (status < 0)
3592                         goto err3;
3593         }
3594
3595         if (IS_ENABLED(CONFIG_OF_DYNAMIC))
3596                 WARN_ON(of_reconfig_notifier_register(&spi_of_notifier));
3597         if (IS_ENABLED(CONFIG_ACPI))
3598                 WARN_ON(acpi_reconfig_notifier_register(&spi_acpi_notifier));
3599
3600         return 0;
3601
3602 err3:
3603         class_unregister(&spi_master_class);
3604 err2:
3605         bus_unregister(&spi_bus_type);
3606 err1:
3607         kfree(buf);
3608         buf = NULL;
3609 err0:
3610         return status;
3611 }
3612
3613 /* board_info is normally registered in arch_initcall(),
3614  * but even essential drivers wait till later
3615  *
3616  * REVISIT only boardinfo really needs static linking. the rest (device and
3617  * driver registration) _could_ be dynamically linked (modular) ... costs
3618  * include needing to have boardinfo data structures be much more public.
3619  */
3620 postcore_initcall(spi_init);
3621