drivers/tty/serial/8250/8250_early.c

   1 // SPDX-License-Identifier: GPL-2.0
   2 /*
   3  * Early serial console for 8250/16550 devices
   4  *
   5  * (c) Copyright 2004 Hewlett-Packard Development Company, L.P.
   6  *      Bjorn Helgaas <bjorn.helgaas@hp.com>
   7  *
   8  * Based on the 8250.c serial driver, Copyright (C) 2001 Russell King,
   9  * and on early_printk.c by Andi Kleen.
  10  *
  11  * This is for use before the serial driver has initialized, in
  12  * particular, before the UARTs have been discovered and named.
  13  * Instead of specifying the console device as, e.g., "ttyS0",
  14  * we locate the device directly by its MMIO or I/O port address.
  15  *
  16  * The user can specify the device directly, e.g.,
  17  *      earlycon=uart8250,io,0x3f8,9600n8
  18  *      earlycon=uart8250,mmio,0xff5e0000,115200n8
  19  *      earlycon=uart8250,mmio32,0xff5e0000,115200n8
  20  * or
  21  *      console=uart8250,io,0x3f8,9600n8
  22  *      console=uart8250,mmio,0xff5e0000,115200n8
  23  *      console=uart8250,mmio32,0xff5e0000,115200n8
  24  */
  25
  26 #include <linux/tty.h>
  27 #include <linux/init.h>
  28 #include <linux/console.h>
  29 #include <linux/of.h>
  30 #include <linux/of_device.h>
  31 #include <linux/serial_reg.h>
  32 #include <linux/serial.h>
  33 #include <linux/serial_8250.h>
  34 #include <asm/io.h>
  35 #include <asm/serial.h>
  36
  37 static unsigned int serial8250_early_in(struct uart_port *port, int offset)
  38 {
  39         int reg_offset = offset;
  40         offset <<= port->regshift;
  41
  42         switch (port->iotype) {
  43         case UPIO_MEM:
  44                 return readb(port->membase + offset);
  45         case UPIO_MEM16:
  46                 return readw(port->membase + offset);
  47         case UPIO_MEM32:
  48                 return readl(port->membase + offset);
  49         case UPIO_MEM32BE:
  50                 return ioread32be(port->membase + offset);
  51         case UPIO_PORT:
  52                 return inb(port->iobase + offset);
  53         case UPIO_AU:
  54                 return port->serial_in(port, reg_offset);
  55         default:
  56                 return 0;
  57         }
  58 }
  59
  60 static void serial8250_early_out(struct uart_port *port, int offset, int value)
  61 {
  62         int reg_offset = offset;
  63         offset <<= port->regshift;
  64
  65         switch (port->iotype) {
  66         case UPIO_MEM:
  67                 writeb(value, port->membase + offset);
  68                 break;
  69         case UPIO_MEM16:
  70                 writew(value, port->membase + offset);
  71                 break;
  72         case UPIO_MEM32:
  73                 writel(value, port->membase + offset);
  74                 break;
  75         case UPIO_MEM32BE:
  76                 iowrite32be(value, port->membase + offset);
  77                 break;
  78         case UPIO_PORT:
  79                 outb(value, port->iobase + offset);
  80                 break;
  81         case UPIO_AU:
  82                 port->serial_out(port, reg_offset, value);
  83                 break;
  84         }
  85 }
  86
  87 #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
  88
  89 static void serial_putc(struct uart_port *port, int c)
  90 {
  91         unsigned int status;
  92
  93         serial8250_early_out(port, UART_TX, c);
  94
  95         for (;;) {
  96                 status = serial8250_early_in(port, UART_LSR);
  97                 if ((status & BOTH_EMPTY) == BOTH_EMPTY)
  98                         break;
  99                 cpu_relax();
 100         }
 101 }
 102
 103 static void early_serial8250_write(struct console *console,
 104                                         const char *s, unsigned int count)
 105 {
 106         struct earlycon_device *device = console->data;
 107         struct uart_port *port = &device->port;
 108
 109         uart_console_write(port, s, count, serial_putc);
 110 }
 111
 112 static void __init init_port(struct earlycon_device *device)
 113 {
 114         struct uart_port *port = &device->port;
 115         unsigned int divisor;
 116         unsigned char c;
 117         unsigned int ier;
 118
 119         serial8250_early_out(port, UART_LCR, 0x3);      /* 8n1 */
 120         ier = serial8250_early_in(port, UART_IER);
 121         serial8250_early_out(port, UART_IER, ier & UART_IER_UUE); /* no interrupt */
 122         serial8250_early_out(port, UART_FCR, 0);        /* no fifo */
 123         serial8250_early_out(port, UART_MCR, 0x3);      /* DTR + RTS */
 124
 125         divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * device->baud);
 126         c = serial8250_early_in(port, UART_LCR);
 127         serial8250_early_out(port, UART_LCR, c | UART_LCR_DLAB);
 128         serial8250_early_out(port, UART_DLL, divisor & 0xff);
 129         serial8250_early_out(port, UART_DLM, (divisor >> 8) & 0xff);
 130         serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB);
 131 }
 132
 133 int __init early_serial8250_setup(struct earlycon_device *device,
 134                                          const char *options)
 135 {
 136         if (!(device->port.membase || device->port.iobase))
 137                 return -ENODEV;
 138
 139         if (!device->baud) {
 140                 struct uart_port *port = &device->port;
 141                 unsigned int ier;
 142
 143                 /* assume the device was initialized, only mask interrupts */
 144                 ier = serial8250_early_in(port, UART_IER);
 145                 serial8250_early_out(port, UART_IER, ier & UART_IER_UUE);
 146         } else
 147                 init_port(device);
 148
 149         device->con->write = early_serial8250_write;
 150         return 0;
 151 }
 152 EARLYCON_DECLARE(uart8250, early_serial8250_setup);
 153 EARLYCON_DECLARE(uart, early_serial8250_setup);
 154 OF_EARLYCON_DECLARE(ns16550, "ns16550", early_serial8250_setup);
 155 OF_EARLYCON_DECLARE(ns16550a, "ns16550a", early_serial8250_setup);
 156 OF_EARLYCON_DECLARE(uart, "nvidia,tegra20-uart", early_serial8250_setup);
 157 OF_EARLYCON_DECLARE(uart, "snps,dw-apb-uart", early_serial8250_setup);
 158
 159 #ifdef CONFIG_SERIAL_8250_OMAP
 160
 161 static int __init early_omap8250_setup(struct earlycon_device *device,
 162                                        const char *options)
 163 {
 164         struct uart_port *port = &device->port;
 165
 166         if (!(device->port.membase || device->port.iobase))
 167                 return -ENODEV;
 168
 169         port->regshift = 2;
 170         device->con->write = early_serial8250_write;
 171         return 0;
 172 }
 173
 174 OF_EARLYCON_DECLARE(omap8250, "ti,omap2-uart", early_omap8250_setup);
 175 OF_EARLYCON_DECLARE(omap8250, "ti,omap3-uart", early_omap8250_setup);
 176 OF_EARLYCON_DECLARE(omap8250, "ti,omap4-uart", early_omap8250_setup);
 177
 178 #endif
 179
 180 #ifdef CONFIG_SERIAL_8250_RT288X
 181
 182 unsigned int au_serial_in(struct uart_port *p, int offset);
 183 void au_serial_out(struct uart_port *p, int offset, int value);
 184
 185 static int __init early_au_setup(struct earlycon_device *dev, const char *opt)
 186 {
 187         dev->port.serial_in = au_serial_in;
 188         dev->port.serial_out = au_serial_out;
 189         dev->port.iotype = UPIO_AU;
 190         dev->con->write = early_serial8250_write;
 191         return 0;
 192 }
 193 OF_EARLYCON_DECLARE(palmchip, "ralink,rt2880-uart", early_au_setup);
 194
 195 #endif