]> asedeno.scripts.mit.edu Git - linux.git/blob - drivers/w1/masters/mxc_w1.c
Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
[linux.git] / drivers / w1 / masters / mxc_w1.c
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright 2005-2008 Freescale Semiconductor, Inc. All Rights Reserved.
4  * Copyright 2008 Luotao Fu, kernel@pengutronix.de
5  */
6
7 #include <linux/clk.h>
8 #include <linux/delay.h>
9 #include <linux/io.h>
10 #include <linux/jiffies.h>
11 #include <linux/module.h>
12 #include <linux/mod_devicetable.h>
13 #include <linux/platform_device.h>
14
15 #include <linux/w1.h>
16
17 /*
18  * MXC W1 Register offsets
19  */
20 #define MXC_W1_CONTROL          0x00
21 # define MXC_W1_CONTROL_RDST    BIT(3)
22 # define MXC_W1_CONTROL_WR(x)   BIT(5 - (x))
23 # define MXC_W1_CONTROL_PST     BIT(6)
24 # define MXC_W1_CONTROL_RPP     BIT(7)
25 #define MXC_W1_TIME_DIVIDER     0x02
26 #define MXC_W1_RESET            0x04
27 # define MXC_W1_RESET_RST       BIT(0)
28
29 struct mxc_w1_device {
30         void __iomem *regs;
31         struct clk *clk;
32         struct w1_bus_master bus_master;
33 };
34
35 /*
36  * this is the low level routine to
37  * reset the device on the One Wire interface
38  * on the hardware
39  */
40 static u8 mxc_w1_ds2_reset_bus(void *data)
41 {
42         struct mxc_w1_device *dev = data;
43         unsigned long timeout;
44
45         writeb(MXC_W1_CONTROL_RPP, dev->regs + MXC_W1_CONTROL);
46
47         /* Wait for reset sequence 511+512us, use 1500us for sure */
48         timeout = jiffies + usecs_to_jiffies(1500);
49
50         udelay(511 + 512);
51
52         do {
53                 u8 ctrl = readb(dev->regs + MXC_W1_CONTROL);
54
55                 /* PST bit is valid after the RPP bit is self-cleared */
56                 if (!(ctrl & MXC_W1_CONTROL_RPP))
57                         return !(ctrl & MXC_W1_CONTROL_PST);
58         } while (time_is_after_jiffies(timeout));
59
60         return 1;
61 }
62
63 /*
64  * this is the low level routine to read/write a bit on the One Wire
65  * interface on the hardware. It does write 0 if parameter bit is set
66  * to 0, otherwise a write 1/read.
67  */
68 static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit)
69 {
70         struct mxc_w1_device *dev = data;
71         unsigned long timeout;
72
73         writeb(MXC_W1_CONTROL_WR(bit), dev->regs + MXC_W1_CONTROL);
74
75         /* Wait for read/write bit (60us, Max 120us), use 200us for sure */
76         timeout = jiffies + usecs_to_jiffies(200);
77
78         udelay(60);
79
80         do {
81                 u8 ctrl = readb(dev->regs + MXC_W1_CONTROL);
82
83                 /* RDST bit is valid after the WR1/RD bit is self-cleared */
84                 if (!(ctrl & MXC_W1_CONTROL_WR(bit)))
85                         return !!(ctrl & MXC_W1_CONTROL_RDST);
86         } while (time_is_after_jiffies(timeout));
87
88         return 0;
89 }
90
91 static int mxc_w1_probe(struct platform_device *pdev)
92 {
93         struct mxc_w1_device *mdev;
94         unsigned long clkrate;
95         struct resource *res;
96         unsigned int clkdiv;
97         int err;
98
99         mdev = devm_kzalloc(&pdev->dev, sizeof(struct mxc_w1_device),
100                             GFP_KERNEL);
101         if (!mdev)
102                 return -ENOMEM;
103
104         mdev->clk = devm_clk_get(&pdev->dev, NULL);
105         if (IS_ERR(mdev->clk))
106                 return PTR_ERR(mdev->clk);
107
108         err = clk_prepare_enable(mdev->clk);
109         if (err)
110                 return err;
111
112         clkrate = clk_get_rate(mdev->clk);
113         if (clkrate < 10000000)
114                 dev_warn(&pdev->dev,
115                          "Low clock frequency causes improper function\n");
116
117         clkdiv = DIV_ROUND_CLOSEST(clkrate, 1000000);
118         clkrate /= clkdiv;
119         if ((clkrate < 980000) || (clkrate > 1020000))
120                 dev_warn(&pdev->dev,
121                          "Incorrect time base frequency %lu Hz\n", clkrate);
122
123         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
124         mdev->regs = devm_ioremap_resource(&pdev->dev, res);
125         if (IS_ERR(mdev->regs)) {
126                 err = PTR_ERR(mdev->regs);
127                 goto out_disable_clk;
128         }
129
130         /* Software reset 1-Wire module */
131         writeb(MXC_W1_RESET_RST, mdev->regs + MXC_W1_RESET);
132         writeb(0, mdev->regs + MXC_W1_RESET);
133
134         writeb(clkdiv - 1, mdev->regs + MXC_W1_TIME_DIVIDER);
135
136         mdev->bus_master.data = mdev;
137         mdev->bus_master.reset_bus = mxc_w1_ds2_reset_bus;
138         mdev->bus_master.touch_bit = mxc_w1_ds2_touch_bit;
139
140         platform_set_drvdata(pdev, mdev);
141
142         err = w1_add_master_device(&mdev->bus_master);
143         if (err)
144                 goto out_disable_clk;
145
146         return 0;
147
148 out_disable_clk:
149         clk_disable_unprepare(mdev->clk);
150         return err;
151 }
152
153 /*
154  * disassociate the w1 device from the driver
155  */
156 static int mxc_w1_remove(struct platform_device *pdev)
157 {
158         struct mxc_w1_device *mdev = platform_get_drvdata(pdev);
159
160         w1_remove_master_device(&mdev->bus_master);
161
162         clk_disable_unprepare(mdev->clk);
163
164         return 0;
165 }
166
167 static const struct of_device_id mxc_w1_dt_ids[] = {
168         { .compatible = "fsl,imx21-owire" },
169         { /* sentinel */ }
170 };
171 MODULE_DEVICE_TABLE(of, mxc_w1_dt_ids);
172
173 static struct platform_driver mxc_w1_driver = {
174         .driver = {
175                 .name = "mxc_w1",
176                 .of_match_table = mxc_w1_dt_ids,
177         },
178         .probe = mxc_w1_probe,
179         .remove = mxc_w1_remove,
180 };
181 module_platform_driver(mxc_w1_driver);
182
183 MODULE_LICENSE("GPL");
184 MODULE_AUTHOR("Freescale Semiconductors Inc");
185 MODULE_DESCRIPTION("Driver for One-Wire on MXC");