1 /* SPDX-License-Identifier: GPL-2.0-only */
3 * linux/mdio.h: definitions for MDIO (clause 45) transceivers
4 * Copyright 2006-2009 Solarflare Communications Inc.
6 #ifndef __LINUX_MDIO_H__
7 #define __LINUX_MDIO_H__
9 #include <uapi/linux/mdio.h>
10 #include <linux/mod_devicetable.h>
15 /* Multiple levels of nesting are possible. However typically this is
16 * limited to nested DSA like layer, a MUX layer, and the normal
17 * user. Instead of trying to handle the general case, just define
20 enum mdio_mutex_lock_class {
30 char modalias[MDIO_NAME_SIZE];
32 int (*bus_match)(struct device *dev, struct device_driver *drv);
33 void (*device_free)(struct mdio_device *mdiodev);
34 void (*device_remove)(struct mdio_device *mdiodev);
36 /* Bus address of the MDIO device (0-31) */
39 struct gpio_desc *reset_gpio;
40 struct reset_control *reset_ctrl;
41 unsigned int reset_assert_delay;
42 unsigned int reset_deassert_delay;
44 #define to_mdio_device(d) container_of(d, struct mdio_device, dev)
46 /* struct mdio_driver_common: Common to all MDIO drivers */
47 struct mdio_driver_common {
48 struct device_driver driver;
51 #define MDIO_DEVICE_FLAG_PHY 1
52 #define to_mdio_common_driver(d) \
53 container_of(d, struct mdio_driver_common, driver)
55 /* struct mdio_driver: Generic MDIO driver */
57 struct mdio_driver_common mdiodrv;
60 * Called during discovery. Used to set
61 * up device-specific structures, if any
63 int (*probe)(struct mdio_device *mdiodev);
65 /* Clears up any memory if needed */
66 void (*remove)(struct mdio_device *mdiodev);
68 #define to_mdio_driver(d) \
69 container_of(to_mdio_common_driver(d), struct mdio_driver, mdiodrv)
71 void mdio_device_free(struct mdio_device *mdiodev);
72 struct mdio_device *mdio_device_create(struct mii_bus *bus, int addr);
73 int mdio_device_register(struct mdio_device *mdiodev);
74 void mdio_device_remove(struct mdio_device *mdiodev);
75 void mdio_device_reset(struct mdio_device *mdiodev, int value);
76 int mdio_driver_register(struct mdio_driver *drv);
77 void mdio_driver_unregister(struct mdio_driver *drv);
78 int mdio_device_bus_match(struct device *dev, struct device_driver *drv);
80 static inline bool mdio_phy_id_is_c45(int phy_id)
82 return (phy_id & MDIO_PHY_ID_C45) && !(phy_id & ~MDIO_PHY_ID_C45_MASK);
85 static inline __u16 mdio_phy_id_prtad(int phy_id)
87 return (phy_id & MDIO_PHY_ID_PRTAD) >> 5;
90 static inline __u16 mdio_phy_id_devad(int phy_id)
92 return phy_id & MDIO_PHY_ID_DEVAD;
96 * struct mdio_if_info - Ethernet controller MDIO interface
97 * @prtad: PRTAD of the PHY (%MDIO_PRTAD_NONE if not present/unknown)
98 * @mmds: Mask of MMDs expected to be present in the PHY. This must be
99 * non-zero unless @prtad = %MDIO_PRTAD_NONE.
100 * @mode_support: MDIO modes supported. If %MDIO_SUPPORTS_C22 is set then
101 * MII register access will be passed through with @devad =
102 * %MDIO_DEVAD_NONE. If %MDIO_EMULATE_C22 is set then access to
103 * commonly used clause 22 registers will be translated into
104 * clause 45 registers.
105 * @dev: Net device structure
106 * @mdio_read: Register read function; returns value or negative error code
107 * @mdio_write: Register write function; returns 0 or negative error code
109 struct mdio_if_info {
112 unsigned mode_support;
114 struct net_device *dev;
115 int (*mdio_read)(struct net_device *dev, int prtad, int devad,
117 int (*mdio_write)(struct net_device *dev, int prtad, int devad,
121 #define MDIO_PRTAD_NONE (-1)
122 #define MDIO_DEVAD_NONE (-1)
123 #define MDIO_SUPPORTS_C22 1
124 #define MDIO_SUPPORTS_C45 2
125 #define MDIO_EMULATE_C22 4
128 struct ethtool_pauseparam;
129 extern int mdio45_probe(struct mdio_if_info *mdio, int prtad);
130 extern int mdio_set_flag(const struct mdio_if_info *mdio,
131 int prtad, int devad, u16 addr, int mask,
133 extern int mdio45_links_ok(const struct mdio_if_info *mdio, u32 mmds);
134 extern int mdio45_nway_restart(const struct mdio_if_info *mdio);
135 extern void mdio45_ethtool_gset_npage(const struct mdio_if_info *mdio,
136 struct ethtool_cmd *ecmd,
137 u32 npage_adv, u32 npage_lpa);
139 mdio45_ethtool_ksettings_get_npage(const struct mdio_if_info *mdio,
140 struct ethtool_link_ksettings *cmd,
141 u32 npage_adv, u32 npage_lpa);
144 * mdio45_ethtool_gset - get settings for ETHTOOL_GSET
145 * @mdio: MDIO interface
146 * @ecmd: Ethtool request structure
148 * Since the CSRs for auto-negotiation using next pages are not fully
149 * standardised, this function does not attempt to decode them. Use
150 * mdio45_ethtool_gset_npage() to specify advertisement bits from next
153 static inline void mdio45_ethtool_gset(const struct mdio_if_info *mdio,
154 struct ethtool_cmd *ecmd)
156 mdio45_ethtool_gset_npage(mdio, ecmd, 0, 0);
160 * mdio45_ethtool_ksettings_get - get settings for ETHTOOL_GLINKSETTINGS
161 * @mdio: MDIO interface
162 * @cmd: Ethtool request structure
164 * Since the CSRs for auto-negotiation using next pages are not fully
165 * standardised, this function does not attempt to decode them. Use
166 * mdio45_ethtool_ksettings_get_npage() to specify advertisement bits
170 mdio45_ethtool_ksettings_get(const struct mdio_if_info *mdio,
171 struct ethtool_link_ksettings *cmd)
173 mdio45_ethtool_ksettings_get_npage(mdio, cmd, 0, 0);
176 extern int mdio_mii_ioctl(const struct mdio_if_info *mdio,
177 struct mii_ioctl_data *mii_data, int cmd);
180 * mmd_eee_cap_to_ethtool_sup_t
181 * @eee_cap: value of the MMD EEE Capability register
183 * A small helper function that translates MMD EEE Capability (3.20) bits
184 * to ethtool supported settings.
186 static inline u32 mmd_eee_cap_to_ethtool_sup_t(u16 eee_cap)
190 if (eee_cap & MDIO_EEE_100TX)
191 supported |= SUPPORTED_100baseT_Full;
192 if (eee_cap & MDIO_EEE_1000T)
193 supported |= SUPPORTED_1000baseT_Full;
194 if (eee_cap & MDIO_EEE_10GT)
195 supported |= SUPPORTED_10000baseT_Full;
196 if (eee_cap & MDIO_EEE_1000KX)
197 supported |= SUPPORTED_1000baseKX_Full;
198 if (eee_cap & MDIO_EEE_10GKX4)
199 supported |= SUPPORTED_10000baseKX4_Full;
200 if (eee_cap & MDIO_EEE_10GKR)
201 supported |= SUPPORTED_10000baseKR_Full;
207 * mmd_eee_adv_to_ethtool_adv_t
208 * @eee_adv: value of the MMD EEE Advertisement/Link Partner Ability registers
210 * A small helper function that translates the MMD EEE Advertisment (7.60)
211 * and MMD EEE Link Partner Ability (7.61) bits to ethtool advertisement
214 static inline u32 mmd_eee_adv_to_ethtool_adv_t(u16 eee_adv)
218 if (eee_adv & MDIO_EEE_100TX)
219 adv |= ADVERTISED_100baseT_Full;
220 if (eee_adv & MDIO_EEE_1000T)
221 adv |= ADVERTISED_1000baseT_Full;
222 if (eee_adv & MDIO_EEE_10GT)
223 adv |= ADVERTISED_10000baseT_Full;
224 if (eee_adv & MDIO_EEE_1000KX)
225 adv |= ADVERTISED_1000baseKX_Full;
226 if (eee_adv & MDIO_EEE_10GKX4)
227 adv |= ADVERTISED_10000baseKX4_Full;
228 if (eee_adv & MDIO_EEE_10GKR)
229 adv |= ADVERTISED_10000baseKR_Full;
235 * ethtool_adv_to_mmd_eee_adv_t
236 * @adv: the ethtool advertisement settings
238 * A small helper function that translates ethtool advertisement settings
239 * to EEE advertisements for the MMD EEE Advertisement (7.60) and
240 * MMD EEE Link Partner Ability (7.61) registers.
242 static inline u16 ethtool_adv_to_mmd_eee_adv_t(u32 adv)
246 if (adv & ADVERTISED_100baseT_Full)
247 reg |= MDIO_EEE_100TX;
248 if (adv & ADVERTISED_1000baseT_Full)
249 reg |= MDIO_EEE_1000T;
250 if (adv & ADVERTISED_10000baseT_Full)
251 reg |= MDIO_EEE_10GT;
252 if (adv & ADVERTISED_1000baseKX_Full)
253 reg |= MDIO_EEE_1000KX;
254 if (adv & ADVERTISED_10000baseKX4_Full)
255 reg |= MDIO_EEE_10GKX4;
256 if (adv & ADVERTISED_10000baseKR_Full)
257 reg |= MDIO_EEE_10GKR;
263 * linkmode_adv_to_mii_10gbt_adv_t
264 * @advertising: the linkmode advertisement settings
266 * A small helper function that translates linkmode advertisement
267 * settings to phy autonegotiation advertisements for the C45
268 * 10GBASE-T AN CONTROL (7.32) register.
270 static inline u32 linkmode_adv_to_mii_10gbt_adv_t(unsigned long *advertising)
274 if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
276 result |= MDIO_AN_10GBT_CTRL_ADV2_5G;
277 if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
279 result |= MDIO_AN_10GBT_CTRL_ADV5G;
280 if (linkmode_test_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
282 result |= MDIO_AN_10GBT_CTRL_ADV10G;
288 * mii_10gbt_stat_mod_linkmode_lpa_t
289 * @advertising: target the linkmode advertisement settings
290 * @adv: value of the C45 10GBASE-T AN STATUS register
292 * A small helper function that translates C45 10GBASE-T AN STATUS register bits
293 * to linkmode advertisement settings. Other bits in advertising aren't changed.
295 static inline void mii_10gbt_stat_mod_linkmode_lpa_t(unsigned long *advertising,
298 linkmode_mod_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
299 advertising, lpa & MDIO_AN_10GBT_STAT_LP2_5G);
300 linkmode_mod_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
301 advertising, lpa & MDIO_AN_10GBT_STAT_LP5G);
302 linkmode_mod_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
303 advertising, lpa & MDIO_AN_10GBT_STAT_LP10G);
306 int __mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
307 int __mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
309 int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
310 int mdiobus_read_nested(struct mii_bus *bus, int addr, u32 regnum);
311 int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
312 int mdiobus_write_nested(struct mii_bus *bus, int addr, u32 regnum, u16 val);
314 int mdiobus_register_device(struct mdio_device *mdiodev);
315 int mdiobus_unregister_device(struct mdio_device *mdiodev);
316 bool mdiobus_is_registered_device(struct mii_bus *bus, int addr);
317 struct phy_device *mdiobus_get_phy(struct mii_bus *bus, int addr);
320 * mdio_module_driver() - Helper macro for registering mdio drivers
322 * Helper macro for MDIO drivers which do not do anything special in module
323 * init/exit. Each module may only use this macro once, and calling it
324 * replaces module_init() and module_exit().
326 #define mdio_module_driver(_mdio_driver) \
327 static int __init mdio_module_init(void) \
329 return mdio_driver_register(&_mdio_driver); \
331 module_init(mdio_module_init); \
332 static void __exit mdio_module_exit(void) \
334 mdio_driver_unregister(&_mdio_driver); \
336 module_exit(mdio_module_exit)
338 #endif /* __LINUX_MDIO_H__ */