2 * Framework and drivers for configuring and reading different PHYs
3 * Based on code in sungem_phy.c and gianfar_phy.c
7 * Copyright (c) 2004 Freescale Semiconductor, Inc.
9 * This program is free software; you can redistribute it and/or modify it
10 * under the terms of the GNU General Public License as published by the
11 * Free Software Foundation; either version 2 of the License, or (at your
12 * option) any later version.
19 #include <linux/compiler.h>
20 #include <linux/spinlock.h>
21 #include <linux/ethtool.h>
22 #include <linux/mdio.h>
23 #include <linux/mii.h>
24 #include <linux/module.h>
25 #include <linux/timer.h>
26 #include <linux/workqueue.h>
27 #include <linux/mod_devicetable.h>
29 #include <linux/atomic.h>
31 #define PHY_DEFAULT_FEATURES (SUPPORTED_Autoneg | \
35 #define PHY_10BT_FEATURES (SUPPORTED_10baseT_Half | \
36 SUPPORTED_10baseT_Full)
38 #define PHY_100BT_FEATURES (SUPPORTED_100baseT_Half | \
39 SUPPORTED_100baseT_Full)
41 #define PHY_1000BT_FEATURES (SUPPORTED_1000baseT_Half | \
42 SUPPORTED_1000baseT_Full)
44 #define PHY_BASIC_FEATURES (PHY_10BT_FEATURES | \
45 PHY_100BT_FEATURES | \
48 #define PHY_GBIT_FEATURES (PHY_BASIC_FEATURES | \
53 * Set phydev->irq to PHY_POLL if interrupts are not supported,
54 * or not desired for this PHY. Set to PHY_IGNORE_INTERRUPT if
55 * the attached driver handles the interrupt
58 #define PHY_IGNORE_INTERRUPT -2
60 #define PHY_HAS_INTERRUPT 0x00000001
61 #define PHY_IS_INTERNAL 0x00000002
62 #define PHY_RST_AFTER_CLK_EN 0x00000004
63 #define MDIO_DEVICE_IS_PHY 0x80000000
65 /* Interface Mode definitions */
67 PHY_INTERFACE_MODE_NA,
68 PHY_INTERFACE_MODE_INTERNAL,
69 PHY_INTERFACE_MODE_MII,
70 PHY_INTERFACE_MODE_GMII,
71 PHY_INTERFACE_MODE_SGMII,
72 PHY_INTERFACE_MODE_TBI,
73 PHY_INTERFACE_MODE_REVMII,
74 PHY_INTERFACE_MODE_RMII,
75 PHY_INTERFACE_MODE_RGMII,
76 PHY_INTERFACE_MODE_RGMII_ID,
77 PHY_INTERFACE_MODE_RGMII_RXID,
78 PHY_INTERFACE_MODE_RGMII_TXID,
79 PHY_INTERFACE_MODE_RTBI,
80 PHY_INTERFACE_MODE_SMII,
81 PHY_INTERFACE_MODE_XGMII,
82 PHY_INTERFACE_MODE_MOCA,
83 PHY_INTERFACE_MODE_QSGMII,
84 PHY_INTERFACE_MODE_TRGMII,
85 PHY_INTERFACE_MODE_1000BASEX,
86 PHY_INTERFACE_MODE_2500BASEX,
87 PHY_INTERFACE_MODE_RXAUI,
88 PHY_INTERFACE_MODE_XAUI,
89 /* 10GBASE-KR, XFI, SFI - single lane 10G Serdes */
90 PHY_INTERFACE_MODE_10GKR,
91 PHY_INTERFACE_MODE_MAX,
95 * phy_supported_speeds - return all speeds currently supported by a phy device
96 * @phy: The phy device to return supported speeds of.
97 * @speeds: buffer to store supported speeds in.
98 * @size: size of speeds buffer.
100 * Description: Returns the number of supported speeds, and
101 * fills the speeds * buffer with the supported speeds. If speeds buffer is
102 * too small to contain * all currently supported speeds, will return as
103 * many speeds as can fit.
105 unsigned int phy_supported_speeds(struct phy_device *phy,
106 unsigned int *speeds,
110 * It maps 'enum phy_interface_t' found in include/linux/phy.h
111 * into the device tree binding of 'phy-mode', so that Ethernet
112 * device driver can get phy interface from device tree.
114 static inline const char *phy_modes(phy_interface_t interface)
117 case PHY_INTERFACE_MODE_NA:
119 case PHY_INTERFACE_MODE_INTERNAL:
121 case PHY_INTERFACE_MODE_MII:
123 case PHY_INTERFACE_MODE_GMII:
125 case PHY_INTERFACE_MODE_SGMII:
127 case PHY_INTERFACE_MODE_TBI:
129 case PHY_INTERFACE_MODE_REVMII:
131 case PHY_INTERFACE_MODE_RMII:
133 case PHY_INTERFACE_MODE_RGMII:
135 case PHY_INTERFACE_MODE_RGMII_ID:
137 case PHY_INTERFACE_MODE_RGMII_RXID:
139 case PHY_INTERFACE_MODE_RGMII_TXID:
141 case PHY_INTERFACE_MODE_RTBI:
143 case PHY_INTERFACE_MODE_SMII:
145 case PHY_INTERFACE_MODE_XGMII:
147 case PHY_INTERFACE_MODE_MOCA:
149 case PHY_INTERFACE_MODE_QSGMII:
151 case PHY_INTERFACE_MODE_TRGMII:
153 case PHY_INTERFACE_MODE_1000BASEX:
155 case PHY_INTERFACE_MODE_2500BASEX:
157 case PHY_INTERFACE_MODE_RXAUI:
159 case PHY_INTERFACE_MODE_XAUI:
161 case PHY_INTERFACE_MODE_10GKR:
169 #define PHY_INIT_TIMEOUT 100000
170 #define PHY_STATE_TIME 1
171 #define PHY_FORCE_TIMEOUT 10
172 #define PHY_AN_TIMEOUT 10
174 #define PHY_MAX_ADDR 32
176 /* Used when trying to connect to a specific phy (mii bus id:phy device id) */
177 #define PHY_ID_FMT "%s:%02x"
179 #define MII_BUS_ID_SIZE 61
181 /* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit
182 IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */
183 #define MII_ADDR_C45 (1<<30)
190 * The Bus class for PHYs. Devices which provide access to
191 * PHYs should register using this structure
194 struct module *owner;
196 char id[MII_BUS_ID_SIZE];
198 int (*read)(struct mii_bus *bus, int addr, int regnum);
199 int (*write)(struct mii_bus *bus, int addr, int regnum, u16 val);
200 int (*reset)(struct mii_bus *bus);
203 * A lock to ensure that only one thing can read/write
204 * the MDIO bus at a time
206 struct mutex mdio_lock;
208 struct device *parent;
210 MDIOBUS_ALLOCATED = 1,
212 MDIOBUS_UNREGISTERED,
217 /* list of all PHYs on bus */
218 struct mdio_device *mdio_map[PHY_MAX_ADDR];
220 /* PHY addresses to be ignored when probing */
223 /* PHY addresses to ignore the TA/read failure */
224 u32 phy_ignore_ta_mask;
227 * An array of interrupts, each PHY's interrupt at the index
228 * matching its address
230 int irq[PHY_MAX_ADDR];
232 /* GPIO reset pulse width in microseconds */
234 /* RESET GPIO descriptor pointer */
235 struct gpio_desc *reset_gpiod;
237 #define to_mii_bus(d) container_of(d, struct mii_bus, dev)
239 struct mii_bus *mdiobus_alloc_size(size_t);
240 static inline struct mii_bus *mdiobus_alloc(void)
242 return mdiobus_alloc_size(0);
245 int __mdiobus_register(struct mii_bus *bus, struct module *owner);
246 #define mdiobus_register(bus) __mdiobus_register(bus, THIS_MODULE)
247 void mdiobus_unregister(struct mii_bus *bus);
248 void mdiobus_free(struct mii_bus *bus);
249 struct mii_bus *devm_mdiobus_alloc_size(struct device *dev, int sizeof_priv);
250 static inline struct mii_bus *devm_mdiobus_alloc(struct device *dev)
252 return devm_mdiobus_alloc_size(dev, 0);
255 void devm_mdiobus_free(struct device *dev, struct mii_bus *bus);
256 struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
258 #define PHY_INTERRUPT_DISABLED 0x0
259 #define PHY_INTERRUPT_ENABLED 0x80000000
261 /* PHY state machine states:
263 * DOWN: PHY device and driver are not ready for anything. probe
264 * should be called if and only if the PHY is in this state,
265 * given that the PHY device exists.
266 * - PHY driver probe function will, depending on the PHY, set
267 * the state to STARTING or READY
269 * STARTING: PHY device is coming up, and the ethernet driver is
270 * not ready. PHY drivers may set this in the probe function.
271 * If they do, they are responsible for making sure the state is
272 * eventually set to indicate whether the PHY is UP or READY,
273 * depending on the state when the PHY is done starting up.
274 * - PHY driver will set the state to READY
275 * - start will set the state to PENDING
277 * READY: PHY is ready to send and receive packets, but the
278 * controller is not. By default, PHYs which do not implement
279 * probe will be set to this state by phy_probe(). If the PHY
280 * driver knows the PHY is ready, and the PHY state is STARTING,
281 * then it sets this STATE.
282 * - start will set the state to UP
284 * PENDING: PHY device is coming up, but the ethernet driver is
285 * ready. phy_start will set this state if the PHY state is
287 * - PHY driver will set the state to UP when the PHY is ready
289 * UP: The PHY and attached device are ready to do work.
290 * Interrupts should be started here.
291 * - timer moves to AN
293 * AN: The PHY is currently negotiating the link state. Link is
294 * therefore down for now. phy_timer will set this state when it
295 * detects the state is UP. config_aneg will set this state
296 * whenever called with phydev->autoneg set to AUTONEG_ENABLE.
297 * - If autonegotiation finishes, but there's no link, it sets
298 * the state to NOLINK.
299 * - If aneg finishes with link, it sets the state to RUNNING,
300 * and calls adjust_link
301 * - If autonegotiation did not finish after an arbitrary amount
302 * of time, autonegotiation should be tried again if the PHY
303 * supports "magic" autonegotiation (back to AN)
304 * - If it didn't finish, and no magic_aneg, move to FORCING.
306 * NOLINK: PHY is up, but not currently plugged in.
307 * - If the timer notes that the link comes back, we move to RUNNING
308 * - config_aneg moves to AN
309 * - phy_stop moves to HALTED
311 * FORCING: PHY is being configured with forced settings
312 * - if link is up, move to RUNNING
313 * - If link is down, we drop to the next highest setting, and
314 * retry (FORCING) after a timeout
315 * - phy_stop moves to HALTED
317 * RUNNING: PHY is currently up, running, and possibly sending
318 * and/or receiving packets
319 * - timer will set CHANGELINK if we're polling (this ensures the
320 * link state is polled every other cycle of this state machine,
321 * which makes it every other second)
322 * - irq will set CHANGELINK
323 * - config_aneg will set AN
324 * - phy_stop moves to HALTED
326 * CHANGELINK: PHY experienced a change in link state
327 * - timer moves to RUNNING if link
328 * - timer moves to NOLINK if the link is down
329 * - phy_stop moves to HALTED
331 * HALTED: PHY is up, but no polling or interrupts are done. Or
332 * PHY is in an error state.
334 * - phy_start moves to RESUMING
336 * RESUMING: PHY was halted, but now wants to run again.
337 * - If we are forcing, or aneg is done, timer moves to RUNNING
338 * - If aneg is not done, timer moves to AN
339 * - phy_stop moves to HALTED
357 * struct phy_c45_device_ids - 802.3-c45 Device Identifiers
358 * @devices_in_package: Bit vector of devices present.
359 * @device_ids: The device identifer for each present device.
361 struct phy_c45_device_ids {
362 u32 devices_in_package;
366 /* phy_device: An instance of a PHY
368 * drv: Pointer to the driver for this PHY instance
369 * phy_id: UID for this device found during discovery
370 * c45_ids: 802.3-c45 Device Identifers if is_c45.
371 * is_c45: Set to true if this phy uses clause 45 addressing.
372 * is_internal: Set to true if this phy is internal to a MAC.
373 * is_pseudo_fixed_link: Set to true if this phy is an Ethernet switch, etc.
374 * has_fixups: Set to true if this phy has fixups/quirks.
375 * suspended: Set to true if this phy has been suspended successfully.
376 * sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal.
377 * loopback_enabled: Set true if this phy has been loopbacked successfully.
378 * state: state of the PHY for management purposes
379 * dev_flags: Device-specific flags used by the PHY driver.
380 * link_timeout: The number of timer firings to wait before the
381 * giving up on the current attempt at acquiring a link
382 * irq: IRQ number of the PHY's interrupt (-1 if none)
383 * phy_timer: The timer for handling the state machine
384 * phy_queue: A work_queue for the phy_mac_interrupt
385 * attached_dev: The attached enet driver's device instance ptr
386 * adjust_link: Callback for the enet controller to respond to
387 * changes in the link state.
389 * speed, duplex, pause, supported, advertising, lp_advertising,
390 * and autoneg are used like in mii_if_info
392 * interrupts currently only supports enabled or disabled,
393 * but could be changed in the future to support enabling
394 * and disabling specific interrupts
396 * Contains some infrastructure for polling and interrupt
397 * handling, as well as handling shifts in PHY hardware state
400 struct mdio_device mdio;
402 /* Information about the PHY type */
403 /* And management functions */
404 struct phy_driver *drv;
408 struct phy_c45_device_ids c45_ids;
410 unsigned is_internal:1;
411 unsigned is_pseudo_fixed_link:1;
412 unsigned has_fixups:1;
413 unsigned suspended:1;
414 unsigned sysfs_links:1;
415 unsigned loopback_enabled:1;
418 /* The most recently read link state */
421 enum phy_state state;
425 phy_interface_t interface;
428 * forced speed & duplex (no autoneg)
429 * partner speed & duplex & pause (autoneg)
436 /* Enabled Interrupts */
439 /* Union of PHY and Attached devices' supported modes */
440 /* See mii.h for more info */
445 /* Energy efficient ethernet modes which should be prohibited */
446 u32 eee_broken_modes;
450 #ifdef CONFIG_LED_TRIGGER_PHY
451 struct phy_led_trigger *phy_led_triggers;
452 unsigned int phy_num_led_triggers;
453 struct phy_led_trigger *last_triggered;
455 struct phy_led_trigger *led_link_trigger;
459 * Interrupt number for this PHY
460 * -1 means no interrupt
464 /* private data pointer */
465 /* For use by PHYs to maintain extra state */
468 /* Interrupt and Polling infrastructure */
469 struct work_struct phy_queue;
470 struct delayed_work state_queue;
474 struct phylink *phylink;
475 struct net_device *attached_dev;
480 void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier);
481 void (*adjust_link)(struct net_device *dev);
483 #define to_phy_device(d) container_of(to_mdio_device(d), \
484 struct phy_device, mdio)
486 /* struct phy_driver: Driver structure for a particular PHY type
488 * driver_data: static driver data
489 * phy_id: The result of reading the UID registers of this PHY
490 * type, and ANDing them with the phy_id_mask. This driver
491 * only works for PHYs with IDs which match this field
492 * name: The friendly name of this PHY type
493 * phy_id_mask: Defines the important bits of the phy_id
494 * features: A list of features (speed, duplex, etc) supported
496 * flags: A bitfield defining certain other features this PHY
497 * supports (like interrupts)
499 * All functions are optional. If config_aneg or read_status
500 * are not implemented, the phy core uses the genphy versions.
501 * Note that none of these functions should be called from
502 * interrupt time. The goal is for the bus read/write functions
503 * to be able to block when the bus transaction is happening,
504 * and be freed up by an interrupt (The MPC85xx has this ability,
505 * though it is not currently supported in the driver).
508 struct mdio_driver_common mdiodrv;
514 const void *driver_data;
517 * Called to issue a PHY software reset
519 int (*soft_reset)(struct phy_device *phydev);
522 * Called to initialize the PHY,
523 * including after a reset
525 int (*config_init)(struct phy_device *phydev);
528 * Called during discovery. Used to set
529 * up device-specific structures, if any
531 int (*probe)(struct phy_device *phydev);
533 /* PHY Power Management */
534 int (*suspend)(struct phy_device *phydev);
535 int (*resume)(struct phy_device *phydev);
538 * Configures the advertisement and resets
539 * autonegotiation if phydev->autoneg is on,
540 * forces the speed to the current settings in phydev
541 * if phydev->autoneg is off
543 int (*config_aneg)(struct phy_device *phydev);
545 /* Determines the auto negotiation result */
546 int (*aneg_done)(struct phy_device *phydev);
548 /* Determines the negotiated speed and duplex */
549 int (*read_status)(struct phy_device *phydev);
551 /* Clears any pending interrupts */
552 int (*ack_interrupt)(struct phy_device *phydev);
554 /* Enables or disables interrupts */
555 int (*config_intr)(struct phy_device *phydev);
558 * Checks if the PHY generated an interrupt.
559 * For multi-PHY devices with shared PHY interrupt pin
561 int (*did_interrupt)(struct phy_device *phydev);
563 /* Clears up any memory if needed */
564 void (*remove)(struct phy_device *phydev);
566 /* Returns true if this is a suitable driver for the given
567 * phydev. If NULL, matching is based on phy_id and
570 int (*match_phy_device)(struct phy_device *phydev);
572 /* Handles ethtool queries for hardware time stamping. */
573 int (*ts_info)(struct phy_device *phydev, struct ethtool_ts_info *ti);
575 /* Handles SIOCSHWTSTAMP ioctl for hardware time stamping. */
576 int (*hwtstamp)(struct phy_device *phydev, struct ifreq *ifr);
579 * Requests a Rx timestamp for 'skb'. If the skb is accepted,
580 * the phy driver promises to deliver it using netif_rx() as
581 * soon as a timestamp becomes available. One of the
582 * PTP_CLASS_ values is passed in 'type'. The function must
583 * return true if the skb is accepted for delivery.
585 bool (*rxtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
588 * Requests a Tx timestamp for 'skb'. The phy driver promises
589 * to deliver it using skb_complete_tx_timestamp() as soon as a
590 * timestamp becomes available. One of the PTP_CLASS_ values
591 * is passed in 'type'.
593 void (*txtstamp)(struct phy_device *dev, struct sk_buff *skb, int type);
595 /* Some devices (e.g. qnap TS-119P II) require PHY register changes to
596 * enable Wake on LAN, so set_wol is provided to be called in the
597 * ethernet driver's set_wol function. */
598 int (*set_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
600 /* See set_wol, but for checking whether Wake on LAN is enabled. */
601 void (*get_wol)(struct phy_device *dev, struct ethtool_wolinfo *wol);
604 * Called to inform a PHY device driver when the core is about to
605 * change the link state. This callback is supposed to be used as
606 * fixup hook for drivers that need to take action when the link
607 * state changes. Drivers are by no means allowed to mess with the
608 * PHY device structure in their implementations.
610 void (*link_change_notify)(struct phy_device *dev);
613 * Phy specific driver override for reading a MMD register.
614 * This function is optional for PHY specific drivers. When
615 * not provided, the default MMD read function will be used
616 * by phy_read_mmd(), which will use either a direct read for
617 * Clause 45 PHYs or an indirect read for Clause 22 PHYs.
618 * devnum is the MMD device number within the PHY device,
619 * regnum is the register within the selected MMD device.
621 int (*read_mmd)(struct phy_device *dev, int devnum, u16 regnum);
624 * Phy specific driver override for writing a MMD register.
625 * This function is optional for PHY specific drivers. When
626 * not provided, the default MMD write function will be used
627 * by phy_write_mmd(), which will use either a direct write for
628 * Clause 45 PHYs, or an indirect write for Clause 22 PHYs.
629 * devnum is the MMD device number within the PHY device,
630 * regnum is the register within the selected MMD device.
631 * val is the value to be written.
633 int (*write_mmd)(struct phy_device *dev, int devnum, u16 regnum,
636 int (*read_page)(struct phy_device *dev);
637 int (*write_page)(struct phy_device *dev, int page);
639 /* Get the size and type of the eeprom contained within a plug-in
641 int (*module_info)(struct phy_device *dev,
642 struct ethtool_modinfo *modinfo);
644 /* Get the eeprom information from the plug-in module */
645 int (*module_eeprom)(struct phy_device *dev,
646 struct ethtool_eeprom *ee, u8 *data);
648 /* Get statistics from the phy using ethtool */
649 int (*get_sset_count)(struct phy_device *dev);
650 void (*get_strings)(struct phy_device *dev, u8 *data);
651 void (*get_stats)(struct phy_device *dev,
652 struct ethtool_stats *stats, u64 *data);
654 /* Get and Set PHY tunables */
655 int (*get_tunable)(struct phy_device *dev,
656 struct ethtool_tunable *tuna, void *data);
657 int (*set_tunable)(struct phy_device *dev,
658 struct ethtool_tunable *tuna,
660 int (*set_loopback)(struct phy_device *dev, bool enable);
662 #define to_phy_driver(d) container_of(to_mdio_common_driver(d), \
663 struct phy_driver, mdiodrv)
665 #define PHY_ANY_ID "MATCH ANY PHY"
666 #define PHY_ANY_UID 0xffffffff
668 /* A Structure for boards to register fixups with the PHY Lib */
670 struct list_head list;
671 char bus_id[MII_BUS_ID_SIZE + 3];
674 int (*run)(struct phy_device *phydev);
677 const char *phy_speed_to_str(int speed);
678 const char *phy_duplex_to_str(unsigned int duplex);
680 /* A structure for mapping a particular speed and duplex
681 * combination to a particular SUPPORTED and ADVERTISED value
689 const struct phy_setting *
690 phy_lookup_setting(int speed, int duplex, const unsigned long *mask,
691 size_t maxbit, bool exact);
692 size_t phy_speeds(unsigned int *speeds, size_t size,
693 unsigned long *mask, size_t maxbit);
695 void phy_resolve_aneg_linkmode(struct phy_device *phydev);
698 * phy_read_mmd - Convenience function for reading a register
699 * from an MMD on a given PHY.
700 * @phydev: The phy_device struct
701 * @devad: The MMD to read from
702 * @regnum: The register on the MMD to read
704 * Same rules as for phy_read();
706 int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum);
709 * phy_read - Convenience function for reading a given PHY register
710 * @phydev: the phy_device struct
711 * @regnum: register number to read
713 * NOTE: MUST NOT be called from interrupt context,
714 * because the bus read/write functions may wait for an interrupt
715 * to conclude the operation.
717 static inline int phy_read(struct phy_device *phydev, u32 regnum)
719 return mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum);
723 * __phy_read - convenience function for reading a given PHY register
724 * @phydev: the phy_device struct
725 * @regnum: register number to read
727 * The caller must have taken the MDIO bus lock.
729 static inline int __phy_read(struct phy_device *phydev, u32 regnum)
731 return __mdiobus_read(phydev->mdio.bus, phydev->mdio.addr, regnum);
735 * phy_write - Convenience function for writing a given PHY register
736 * @phydev: the phy_device struct
737 * @regnum: register number to write
738 * @val: value to write to @regnum
740 * NOTE: MUST NOT be called from interrupt context,
741 * because the bus read/write functions may wait for an interrupt
742 * to conclude the operation.
744 static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val)
746 return mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum, val);
750 * __phy_write - Convenience function for writing a given PHY register
751 * @phydev: the phy_device struct
752 * @regnum: register number to write
753 * @val: value to write to @regnum
755 * The caller must have taken the MDIO bus lock.
757 static inline int __phy_write(struct phy_device *phydev, u32 regnum, u16 val)
759 return __mdiobus_write(phydev->mdio.bus, phydev->mdio.addr, regnum,
763 int __phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
764 int phy_modify(struct phy_device *phydev, u32 regnum, u16 mask, u16 set);
767 * __phy_set_bits - Convenience function for setting bits in a PHY register
768 * @phydev: the phy_device struct
769 * @regnum: register number to write
772 * The caller must have taken the MDIO bus lock.
774 static inline int __phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val)
776 return __phy_modify(phydev, regnum, 0, val);
780 * __phy_clear_bits - Convenience function for clearing bits in a PHY register
781 * @phydev: the phy_device struct
782 * @regnum: register number to write
783 * @val: bits to clear
785 * The caller must have taken the MDIO bus lock.
787 static inline int __phy_clear_bits(struct phy_device *phydev, u32 regnum,
790 return __phy_modify(phydev, regnum, val, 0);
794 * phy_set_bits - Convenience function for setting bits in a PHY register
795 * @phydev: the phy_device struct
796 * @regnum: register number to write
799 static inline int phy_set_bits(struct phy_device *phydev, u32 regnum, u16 val)
801 return phy_modify(phydev, regnum, 0, val);
805 * phy_clear_bits - Convenience function for clearing bits in a PHY register
806 * @phydev: the phy_device struct
807 * @regnum: register number to write
808 * @val: bits to clear
810 static inline int phy_clear_bits(struct phy_device *phydev, u32 regnum, u16 val)
812 return phy_modify(phydev, regnum, val, 0);
816 * phy_interrupt_is_valid - Convenience function for testing a given PHY irq
817 * @phydev: the phy_device struct
819 * NOTE: must be kept in sync with addition/removal of PHY_POLL and
820 * PHY_IGNORE_INTERRUPT
822 static inline bool phy_interrupt_is_valid(struct phy_device *phydev)
824 return phydev->irq != PHY_POLL && phydev->irq != PHY_IGNORE_INTERRUPT;
828 * phy_is_internal - Convenience function for testing if a PHY is internal
829 * @phydev: the phy_device struct
831 static inline bool phy_is_internal(struct phy_device *phydev)
833 return phydev->is_internal;
837 * phy_interface_mode_is_rgmii - Convenience function for testing if a
838 * PHY interface mode is RGMII (all variants)
839 * @mode: the phy_interface_t enum
841 static inline bool phy_interface_mode_is_rgmii(phy_interface_t mode)
843 return mode >= PHY_INTERFACE_MODE_RGMII &&
844 mode <= PHY_INTERFACE_MODE_RGMII_TXID;
848 * phy_interface_mode_is_8023z() - does the phy interface mode use 802.3z
850 * @mode: one of &enum phy_interface_t
852 * Returns true if the phy interface mode uses the 16-bit negotiation
853 * word as defined in 802.3z. (See 802.3-2015 37.2.1 Config_Reg encoding)
855 static inline bool phy_interface_mode_is_8023z(phy_interface_t mode)
857 return mode == PHY_INTERFACE_MODE_1000BASEX ||
858 mode == PHY_INTERFACE_MODE_2500BASEX;
862 * phy_interface_is_rgmii - Convenience function for testing if a PHY interface
863 * is RGMII (all variants)
864 * @phydev: the phy_device struct
866 static inline bool phy_interface_is_rgmii(struct phy_device *phydev)
868 return phy_interface_mode_is_rgmii(phydev->interface);
872 * phy_is_pseudo_fixed_link - Convenience function for testing if this
873 * PHY is the CPU port facing side of an Ethernet switch, or similar.
874 * @phydev: the phy_device struct
876 static inline bool phy_is_pseudo_fixed_link(struct phy_device *phydev)
878 return phydev->is_pseudo_fixed_link;
882 * phy_write_mmd - Convenience function for writing a register
883 * on an MMD on a given PHY.
884 * @phydev: The phy_device struct
885 * @devad: The MMD to read from
886 * @regnum: The register on the MMD to read
887 * @val: value to write to @regnum
889 * Same rules as for phy_write();
891 int phy_write_mmd(struct phy_device *phydev, int devad, u32 regnum, u16 val);
893 int phy_save_page(struct phy_device *phydev);
894 int phy_select_page(struct phy_device *phydev, int page);
895 int phy_restore_page(struct phy_device *phydev, int oldpage, int ret);
896 int phy_read_paged(struct phy_device *phydev, int page, u32 regnum);
897 int phy_write_paged(struct phy_device *phydev, int page, u32 regnum, u16 val);
898 int phy_modify_paged(struct phy_device *phydev, int page, u32 regnum,
901 struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
903 struct phy_c45_device_ids *c45_ids);
904 #if IS_ENABLED(CONFIG_PHYLIB)
905 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
906 int phy_device_register(struct phy_device *phy);
907 void phy_device_free(struct phy_device *phydev);
910 struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
915 static inline int phy_device_register(struct phy_device *phy)
920 static inline void phy_device_free(struct phy_device *phydev) { }
921 #endif /* CONFIG_PHYLIB */
922 void phy_device_remove(struct phy_device *phydev);
923 int phy_init_hw(struct phy_device *phydev);
924 int phy_suspend(struct phy_device *phydev);
925 int phy_resume(struct phy_device *phydev);
926 int __phy_resume(struct phy_device *phydev);
927 int phy_loopback(struct phy_device *phydev, bool enable);
928 struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
929 phy_interface_t interface);
930 struct phy_device *phy_find_first(struct mii_bus *bus);
931 int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
932 u32 flags, phy_interface_t interface);
933 int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
934 void (*handler)(struct net_device *),
935 phy_interface_t interface);
936 struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
937 void (*handler)(struct net_device *),
938 phy_interface_t interface);
939 void phy_disconnect(struct phy_device *phydev);
940 void phy_detach(struct phy_device *phydev);
941 void phy_start(struct phy_device *phydev);
942 void phy_stop(struct phy_device *phydev);
943 int phy_start_aneg(struct phy_device *phydev);
944 int phy_aneg_done(struct phy_device *phydev);
946 int phy_stop_interrupts(struct phy_device *phydev);
947 int phy_restart_aneg(struct phy_device *phydev);
948 int phy_reset_after_clk_enable(struct phy_device *phydev);
950 static inline void phy_device_reset(struct phy_device *phydev, int value)
952 mdio_device_reset(&phydev->mdio, value);
955 #define phydev_err(_phydev, format, args...) \
956 dev_err(&_phydev->mdio.dev, format, ##args)
958 #define phydev_dbg(_phydev, format, args...) \
959 dev_dbg(&_phydev->mdio.dev, format, ##args)
961 static inline const char *phydev_name(const struct phy_device *phydev)
963 return dev_name(&phydev->mdio.dev);
966 void phy_attached_print(struct phy_device *phydev, const char *fmt, ...)
968 void phy_attached_info(struct phy_device *phydev);
971 int genphy_config_init(struct phy_device *phydev);
972 int genphy_setup_forced(struct phy_device *phydev);
973 int genphy_restart_aneg(struct phy_device *phydev);
974 int genphy_config_aneg(struct phy_device *phydev);
975 int genphy_aneg_done(struct phy_device *phydev);
976 int genphy_update_link(struct phy_device *phydev);
977 int genphy_read_status(struct phy_device *phydev);
978 int genphy_suspend(struct phy_device *phydev);
979 int genphy_resume(struct phy_device *phydev);
980 int genphy_loopback(struct phy_device *phydev, bool enable);
981 int genphy_soft_reset(struct phy_device *phydev);
982 static inline int genphy_no_soft_reset(struct phy_device *phydev)
986 int genphy_read_mmd_unsupported(struct phy_device *phdev, int devad,
988 int genphy_write_mmd_unsupported(struct phy_device *phdev, int devnum,
989 u16 regnum, u16 val);
992 int genphy_c45_restart_aneg(struct phy_device *phydev);
993 int genphy_c45_aneg_done(struct phy_device *phydev);
994 int genphy_c45_read_link(struct phy_device *phydev, u32 mmd_mask);
995 int genphy_c45_read_lpa(struct phy_device *phydev);
996 int genphy_c45_read_pma(struct phy_device *phydev);
997 int genphy_c45_pma_setup_forced(struct phy_device *phydev);
998 int genphy_c45_an_disable_aneg(struct phy_device *phydev);
999 int genphy_c45_read_mdix(struct phy_device *phydev);
1001 /* The gen10g_* functions are the old Clause 45 stub */
1002 int gen10g_config_aneg(struct phy_device *phydev);
1003 int gen10g_read_status(struct phy_device *phydev);
1004 int gen10g_no_soft_reset(struct phy_device *phydev);
1005 int gen10g_config_init(struct phy_device *phydev);
1006 int gen10g_suspend(struct phy_device *phydev);
1007 int gen10g_resume(struct phy_device *phydev);
1009 static inline int phy_read_status(struct phy_device *phydev)
1014 if (phydev->drv->read_status)
1015 return phydev->drv->read_status(phydev);
1017 return genphy_read_status(phydev);
1020 void phy_driver_unregister(struct phy_driver *drv);
1021 void phy_drivers_unregister(struct phy_driver *drv, int n);
1022 int phy_driver_register(struct phy_driver *new_driver, struct module *owner);
1023 int phy_drivers_register(struct phy_driver *new_driver, int n,
1024 struct module *owner);
1025 void phy_state_machine(struct work_struct *work);
1026 void phy_change_work(struct work_struct *work);
1027 void phy_mac_interrupt(struct phy_device *phydev);
1028 void phy_start_machine(struct phy_device *phydev);
1029 void phy_stop_machine(struct phy_device *phydev);
1030 void phy_trigger_machine(struct phy_device *phydev, bool sync);
1031 int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
1032 void phy_ethtool_ksettings_get(struct phy_device *phydev,
1033 struct ethtool_link_ksettings *cmd);
1034 int phy_ethtool_ksettings_set(struct phy_device *phydev,
1035 const struct ethtool_link_ksettings *cmd);
1036 int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
1037 int phy_start_interrupts(struct phy_device *phydev);
1038 void phy_print_status(struct phy_device *phydev);
1039 int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
1041 int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
1042 int (*run)(struct phy_device *));
1043 int phy_register_fixup_for_id(const char *bus_id,
1044 int (*run)(struct phy_device *));
1045 int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
1046 int (*run)(struct phy_device *));
1048 int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask);
1049 int phy_unregister_fixup_for_id(const char *bus_id);
1050 int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask);
1052 int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
1053 int phy_get_eee_err(struct phy_device *phydev);
1054 int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data);
1055 int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data);
1056 int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
1057 void phy_ethtool_get_wol(struct phy_device *phydev,
1058 struct ethtool_wolinfo *wol);
1059 int phy_ethtool_get_link_ksettings(struct net_device *ndev,
1060 struct ethtool_link_ksettings *cmd);
1061 int phy_ethtool_set_link_ksettings(struct net_device *ndev,
1062 const struct ethtool_link_ksettings *cmd);
1063 int phy_ethtool_nway_reset(struct net_device *ndev);
1065 #if IS_ENABLED(CONFIG_PHYLIB)
1066 int __init mdio_bus_init(void);
1067 void mdio_bus_exit(void);
1070 /* Inline function for use within net/core/ethtool.c (built-in) */
1071 static inline int phy_ethtool_get_strings(struct phy_device *phydev, u8 *data)
1076 mutex_lock(&phydev->lock);
1077 phydev->drv->get_strings(phydev, data);
1078 mutex_unlock(&phydev->lock);
1083 static inline int phy_ethtool_get_sset_count(struct phy_device *phydev)
1090 if (phydev->drv->get_sset_count &&
1091 phydev->drv->get_strings &&
1092 phydev->drv->get_stats) {
1093 mutex_lock(&phydev->lock);
1094 ret = phydev->drv->get_sset_count(phydev);
1095 mutex_unlock(&phydev->lock);
1103 static inline int phy_ethtool_get_stats(struct phy_device *phydev,
1104 struct ethtool_stats *stats, u64 *data)
1109 mutex_lock(&phydev->lock);
1110 phydev->drv->get_stats(phydev, stats, data);
1111 mutex_unlock(&phydev->lock);
1116 extern struct bus_type mdio_bus_type;
1118 struct mdio_board_info {
1120 char modalias[MDIO_NAME_SIZE];
1122 const void *platform_data;
1125 #if IS_ENABLED(CONFIG_MDIO_DEVICE)
1126 int mdiobus_register_board_info(const struct mdio_board_info *info,
1129 static inline int mdiobus_register_board_info(const struct mdio_board_info *i,
1138 * module_phy_driver() - Helper macro for registering PHY drivers
1139 * @__phy_drivers: array of PHY drivers to register
1141 * Helper macro for PHY drivers which do not do anything special in module
1142 * init/exit. Each module may only use this macro once, and calling it
1143 * replaces module_init() and module_exit().
1145 #define phy_module_driver(__phy_drivers, __count) \
1146 static int __init phy_module_init(void) \
1148 return phy_drivers_register(__phy_drivers, __count, THIS_MODULE); \
1150 module_init(phy_module_init); \
1151 static void __exit phy_module_exit(void) \
1153 phy_drivers_unregister(__phy_drivers, __count); \
1155 module_exit(phy_module_exit)
1157 #define module_phy_driver(__phy_drivers) \
1158 phy_module_driver(__phy_drivers, ARRAY_SIZE(__phy_drivers))
1160 #endif /* __PHY_H */