]> asedeno.scripts.mit.edu Git - linux.git/blob - include/scsi/libsas.h
mfd: cros_ec: Update ACPI interface definition
[linux.git] / include / scsi / libsas.h
1 /*
2  * SAS host prototypes and structures header file
3  *
4  * Copyright (C) 2005 Adaptec, Inc.  All rights reserved.
5  * Copyright (C) 2005 Luben Tuikov <luben_tuikov@adaptec.com>
6  *
7  * This file is licensed under GPLv2.
8  *
9  * This program is free software; you can redistribute it and/or
10  * modify it under the terms of the GNU General Public License as
11  * published by the Free Software Foundation; either version 2 of the
12  * License, or (at your option) any later version.
13  *
14  * This program is distributed in the hope that it will be useful, but
15  * WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
17  * General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software
21  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
22  * USA
23  *
24  */
25
26 #ifndef _LIBSAS_H_
27 #define _LIBSAS_H_
28
29
30 #include <linux/timer.h>
31 #include <linux/pci.h>
32 #include <scsi/sas.h>
33 #include <linux/libata.h>
34 #include <linux/list.h>
35 #include <scsi/scsi_device.h>
36 #include <scsi/scsi_cmnd.h>
37 #include <scsi/scsi_transport_sas.h>
38 #include <linux/scatterlist.h>
39 #include <linux/slab.h>
40
41 struct block_device;
42
43 enum sas_class {
44         SAS,
45         EXPANDER
46 };
47
48 enum sas_phy_role {
49         PHY_ROLE_NONE = 0,
50         PHY_ROLE_TARGET = 0x40,
51         PHY_ROLE_INITIATOR = 0x80,
52 };
53
54 enum sas_phy_type {
55         PHY_TYPE_PHYSICAL,
56         PHY_TYPE_VIRTUAL
57 };
58
59 /* The events are mnemonically described in sas_dump.c
60  * so when updating/adding events here, please also
61  * update the other file too.
62  */
63 enum port_event {
64         PORTE_BYTES_DMAED     = 0U,
65         PORTE_BROADCAST_RCVD,
66         PORTE_LINK_RESET_ERR,
67         PORTE_TIMER_EVENT,
68         PORTE_HARD_RESET,
69         PORT_NUM_EVENTS,
70 };
71
72 enum phy_event {
73         PHYE_LOSS_OF_SIGNAL   = 0U,
74         PHYE_OOB_DONE,
75         PHYE_OOB_ERROR,
76         PHYE_SPINUP_HOLD,             /* hot plug SATA, no COMWAKE sent */
77         PHYE_RESUME_TIMEOUT,
78         PHYE_SHUTDOWN,
79         PHY_NUM_EVENTS,
80 };
81
82 enum discover_event {
83         DISCE_DISCOVER_DOMAIN   = 0U,
84         DISCE_REVALIDATE_DOMAIN,
85         DISCE_SUSPEND,
86         DISCE_RESUME,
87         DISC_NUM_EVENTS,
88 };
89
90 /* ---------- Expander Devices ---------- */
91
92 #define to_dom_device(_obj) container_of(_obj, struct domain_device, dev_obj)
93 #define to_dev_attr(_attr)  container_of(_attr, struct domain_dev_attribute,\
94                                          attr)
95
96 enum routing_attribute {
97         DIRECT_ROUTING,
98         SUBTRACTIVE_ROUTING,
99         TABLE_ROUTING,
100 };
101
102 enum ex_phy_state {
103         PHY_EMPTY,
104         PHY_VACANT,
105         PHY_NOT_PRESENT,
106         PHY_DEVICE_DISCOVERED
107 };
108
109 struct ex_phy {
110         int    phy_id;
111
112         enum ex_phy_state phy_state;
113
114         enum sas_device_type attached_dev_type;
115         enum sas_linkrate linkrate;
116
117         u8   attached_sata_host:1;
118         u8   attached_sata_dev:1;
119         u8   attached_sata_ps:1;
120
121         enum sas_protocol attached_tproto;
122         enum sas_protocol attached_iproto;
123
124         u8   attached_sas_addr[SAS_ADDR_SIZE];
125         u8   attached_phy_id;
126
127         int phy_change_count;
128         enum routing_attribute routing_attr;
129         u8   virtual:1;
130
131         int  last_da_index;
132
133         struct sas_phy *phy;
134         struct sas_port *port;
135 };
136
137 struct expander_device {
138         struct list_head children;
139
140         int    ex_change_count;
141         u16    max_route_indexes;
142         u8     num_phys;
143
144         u8     t2t_supp:1;
145         u8     configuring:1;
146         u8     conf_route_table:1;
147
148         u8     enclosure_logical_id[8];
149
150         struct ex_phy *ex_phy;
151         struct sas_port *parent_port;
152
153         struct mutex cmd_mutex;
154 };
155
156 /* ---------- SATA device ---------- */
157 #define ATA_RESP_FIS_SIZE 24
158
159 struct sata_device {
160         unsigned int class;
161         u8     port_no;        /* port number, if this is a PM (Port) */
162
163         struct ata_port *ap;
164         struct ata_host *ata_host;
165         struct smp_resp rps_resp ____cacheline_aligned; /* report_phy_sata_resp */
166         u8     fis[ATA_RESP_FIS_SIZE];
167 };
168
169 struct ssp_device {
170         struct list_head eh_list_node; /* pending a user requested eh action */
171         struct scsi_lun reset_lun;
172 };
173
174 enum {
175         SAS_DEV_GONE,
176         SAS_DEV_FOUND, /* device notified to lldd */
177         SAS_DEV_DESTROY,
178         SAS_DEV_EH_PENDING,
179         SAS_DEV_LU_RESET,
180         SAS_DEV_RESET,
181 };
182
183 struct domain_device {
184         spinlock_t done_lock;
185         enum sas_device_type dev_type;
186
187         enum sas_linkrate linkrate;
188         enum sas_linkrate min_linkrate;
189         enum sas_linkrate max_linkrate;
190
191         int  pathways;
192
193         struct domain_device *parent;
194         struct list_head siblings; /* devices on the same level */
195         struct asd_sas_port *port;        /* shortcut to root of the tree */
196         struct sas_phy *phy;
197
198         struct list_head dev_list_node;
199         struct list_head disco_list_node; /* awaiting probe or destruct */
200
201         enum sas_protocol    iproto;
202         enum sas_protocol    tproto;
203
204         struct sas_rphy *rphy;
205
206         u8  sas_addr[SAS_ADDR_SIZE];
207         u8  hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
208
209         u8  frame_rcvd[32];
210
211         union {
212                 struct expander_device ex_dev;
213                 struct sata_device     sata_dev; /* STP & directly attached */
214                 struct ssp_device      ssp_dev;
215         };
216
217         void *lldd_dev;
218         unsigned long state;
219         struct kref kref;
220 };
221
222 struct sas_work {
223         struct list_head drain_node;
224         struct work_struct work;
225 };
226
227 /* Lots of code duplicates this in the SCSI tree, which can be factored out */
228 static inline bool sas_dev_type_is_expander(enum sas_device_type type)
229 {
230         return type == SAS_EDGE_EXPANDER_DEVICE ||
231                type == SAS_FANOUT_EXPANDER_DEVICE;
232 }
233
234 static inline void INIT_SAS_WORK(struct sas_work *sw, void (*fn)(struct work_struct *))
235 {
236         INIT_WORK(&sw->work, fn);
237         INIT_LIST_HEAD(&sw->drain_node);
238 }
239
240 struct sas_discovery_event {
241         struct sas_work work;
242         struct asd_sas_port *port;
243 };
244
245 static inline struct sas_discovery_event *to_sas_discovery_event(struct work_struct *work)
246 {
247         struct sas_discovery_event *ev = container_of(work, typeof(*ev), work.work);
248
249         return ev;
250 }
251
252 struct sas_discovery {
253         struct sas_discovery_event disc_work[DISC_NUM_EVENTS];
254         unsigned long    pending;
255         u8     fanout_sas_addr[SAS_ADDR_SIZE];
256         u8     eeds_a[SAS_ADDR_SIZE];
257         u8     eeds_b[SAS_ADDR_SIZE];
258         int    max_level;
259 };
260
261 /* The port struct is Class:RW, driver:RO */
262 struct asd_sas_port {
263 /* private: */
264         struct sas_discovery disc;
265         struct domain_device *port_dev;
266         spinlock_t dev_list_lock;
267         struct list_head dev_list;
268         struct list_head disco_list;
269         struct list_head destroy_list;
270         struct list_head sas_port_del_list;
271         enum   sas_linkrate linkrate;
272
273         struct sas_work work;
274         int suspended;
275
276 /* public: */
277         int id;
278
279         enum sas_class   class;
280         u8               sas_addr[SAS_ADDR_SIZE];
281         u8               attached_sas_addr[SAS_ADDR_SIZE];
282         enum sas_protocol   iproto;
283         enum sas_protocol   tproto;
284
285         enum sas_oob_mode oob_mode;
286
287         spinlock_t       phy_list_lock;
288         struct list_head phy_list;
289         int              num_phys;
290         u32              phy_mask;
291
292         struct sas_ha_struct *ha;
293
294         struct sas_port *port;
295
296         void *lldd_port;          /* not touched by the sas class code */
297 };
298
299 struct asd_sas_event {
300         struct sas_work work;
301         struct asd_sas_phy *phy;
302         int event;
303 };
304
305 static inline struct asd_sas_event *to_asd_sas_event(struct work_struct *work)
306 {
307         struct asd_sas_event *ev = container_of(work, typeof(*ev), work.work);
308
309         return ev;
310 }
311
312 static inline void INIT_SAS_EVENT(struct asd_sas_event *ev,
313                 void (*fn)(struct work_struct *),
314                 struct asd_sas_phy *phy, int event)
315 {
316         INIT_SAS_WORK(&ev->work, fn);
317         ev->phy = phy;
318         ev->event = event;
319 }
320
321 #define SAS_PHY_SHUTDOWN_THRES   1024
322
323 /* The phy pretty much is controlled by the LLDD.
324  * The class only reads those fields.
325  */
326 struct asd_sas_phy {
327 /* private: */
328         atomic_t event_nr;
329         int in_shutdown;
330         int error;
331         int suspended;
332
333         struct sas_phy *phy;
334
335 /* public: */
336         /* The following are class:RO, driver:R/W */
337         int            enabled;   /* must be set */
338
339         int            id;        /* must be set */
340         enum sas_class class;
341         enum sas_protocol iproto;
342         enum sas_protocol tproto;
343
344         enum sas_phy_type  type;
345         enum sas_phy_role  role;
346         enum sas_oob_mode  oob_mode;
347         enum sas_linkrate linkrate;
348
349         u8   *sas_addr;           /* must be set */
350         u8   attached_sas_addr[SAS_ADDR_SIZE]; /* class:RO, driver: R/W */
351
352         spinlock_t     frame_rcvd_lock;
353         u8             *frame_rcvd; /* must be set */
354         int            frame_rcvd_size;
355
356         spinlock_t     sas_prim_lock;
357         u32            sas_prim;
358
359         struct list_head port_phy_el; /* driver:RO */
360         struct asd_sas_port      *port; /* Class:RW, driver: RO */
361
362         struct sas_ha_struct *ha; /* may be set; the class sets it anyway */
363
364         void *lldd_phy;           /* not touched by the sas_class_code */
365 };
366
367 struct scsi_core {
368         struct Scsi_Host *shost;
369
370 };
371
372 enum sas_ha_state {
373         SAS_HA_REGISTERED,
374         SAS_HA_DRAINING,
375         SAS_HA_ATA_EH_ACTIVE,
376         SAS_HA_FROZEN,
377 };
378
379 struct sas_ha_struct {
380 /* private: */
381         struct list_head  defer_q; /* work queued while draining */
382         struct mutex      drain_mutex;
383         unsigned long     state;
384         spinlock_t        lock;
385         int               eh_active;
386         wait_queue_head_t eh_wait_q;
387         struct list_head  eh_dev_q;
388
389         struct mutex disco_mutex;
390
391         struct scsi_core core;
392
393 /* public: */
394         char *sas_ha_name;
395         struct device *dev;       /* should be set */
396         struct module *lldd_module; /* should be set */
397
398         struct workqueue_struct *event_q;
399         struct workqueue_struct *disco_q;
400
401         u8 *sas_addr;             /* must be set */
402         u8 hashed_sas_addr[HASHED_SAS_ADDR_SIZE];
403
404         spinlock_t      phy_port_lock;
405         struct asd_sas_phy  **sas_phy; /* array of valid pointers, must be set */
406         struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
407         int             num_phys; /* must be set, gt 0, static */
408
409         int strict_wide_ports; /* both sas_addr and attached_sas_addr must match
410                                 * their siblings when forming wide ports */
411
412         /* LLDD calls these to notify the class of an event. */
413         int (*notify_port_event)(struct asd_sas_phy *, enum port_event);
414         int (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
415
416         void *lldd_ha;            /* not touched by sas class code */
417
418         struct list_head eh_done_q;  /* complete via scsi_eh_flush_done_q */
419         struct list_head eh_ata_q; /* scmds to promote from sas to ata eh */
420
421         int event_thres;
422 };
423
424 #define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
425
426 static inline struct domain_device *
427 starget_to_domain_dev(struct scsi_target *starget) {
428         return starget->hostdata;
429 }
430
431 static inline struct domain_device *
432 sdev_to_domain_dev(struct scsi_device *sdev) {
433         return starget_to_domain_dev(sdev->sdev_target);
434 }
435
436 static inline struct ata_device *sas_to_ata_dev(struct domain_device *dev)
437 {
438         return &dev->sata_dev.ap->link.device[0];
439 }
440
441 static inline struct domain_device *
442 cmd_to_domain_dev(struct scsi_cmnd *cmd)
443 {
444         return sdev_to_domain_dev(cmd->device);
445 }
446
447 void sas_hash_addr(u8 *hashed, const u8 *sas_addr);
448
449 /* Before calling a notify event, LLDD should use this function
450  * when the link is severed (possibly from its tasklet).
451  * The idea is that the Class only reads those, while the LLDD,
452  * can R/W these (thus avoiding a race).
453  */
454 static inline void sas_phy_disconnected(struct asd_sas_phy *phy)
455 {
456         phy->oob_mode = OOB_NOT_CONNECTED;
457         phy->linkrate = SAS_LINK_RATE_UNKNOWN;
458 }
459
460 static inline unsigned int to_sas_gpio_od(int device, int bit)
461 {
462         return 3 * device + bit;
463 }
464
465 static inline void sas_put_local_phy(struct sas_phy *phy)
466 {
467         put_device(&phy->dev);
468 }
469
470 #ifdef CONFIG_SCSI_SAS_HOST_SMP
471 int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count);
472 #else
473 static inline int try_test_sas_gpio_gp_bit(unsigned int od, u8 *data, u8 index, u8 count)
474 {
475         return -1;
476 }
477 #endif
478
479 /* ---------- Tasks ---------- */
480 /*
481       service_response |  SAS_TASK_COMPLETE  |  SAS_TASK_UNDELIVERED |
482   exec_status          |                     |                       |
483   ---------------------+---------------------+-----------------------+
484        SAM_...         |         X           |                       |
485        DEV_NO_RESPONSE |         X           |           X           |
486        INTERRUPTED     |         X           |                       |
487        QUEUE_FULL      |                     |           X           |
488        DEVICE_UNKNOWN  |                     |           X           |
489        SG_ERR          |                     |           X           |
490   ---------------------+---------------------+-----------------------+
491  */
492
493 enum service_response {
494         SAS_TASK_COMPLETE,
495         SAS_TASK_UNDELIVERED = -1,
496 };
497
498 enum exec_status {
499         /* The SAM_STAT_.. codes fit in the lower 6 bits, alias some of
500          * them here to silence 'case value not in enumerated type' warnings
501          */
502         __SAM_STAT_CHECK_CONDITION = SAM_STAT_CHECK_CONDITION,
503
504         SAS_DEV_NO_RESPONSE = 0x80,
505         SAS_DATA_UNDERRUN,
506         SAS_DATA_OVERRUN,
507         SAS_INTERRUPTED,
508         SAS_QUEUE_FULL,
509         SAS_DEVICE_UNKNOWN,
510         SAS_SG_ERR,
511         SAS_OPEN_REJECT,
512         SAS_OPEN_TO,
513         SAS_PROTO_RESPONSE,
514         SAS_PHY_DOWN,
515         SAS_NAK_R_ERR,
516         SAS_PENDING,
517         SAS_ABORTED_TASK,
518 };
519
520 /* When a task finishes with a response, the LLDD examines the
521  * response:
522  *      - For an ATA task task_status_struct::stat is set to
523  * SAS_PROTO_RESPONSE, and the task_status_struct::buf is set to the
524  * contents of struct ata_task_resp.
525  *      - For SSP tasks, if no data is present or status/TMF response
526  * is valid, task_status_struct::stat is set.  If data is present
527  * (SENSE data), the LLDD copies up to SAS_STATUS_BUF_SIZE, sets
528  * task_status_struct::buf_valid_size, and task_status_struct::stat is
529  * set to SAM_CHECK_COND.
530  *
531  * "buf" has format SCSI Sense for SSP task, or struct ata_task_resp
532  * for ATA task.
533  *
534  * "frame_len" is the total frame length, which could be more or less
535  * than actually copied.
536  *
537  * Tasks ending with response, always set the residual field.
538  */
539 struct ata_task_resp {
540         u16  frame_len;
541         u8   ending_fis[ATA_RESP_FIS_SIZE];       /* dev to host or data-in */
542 };
543
544 #define SAS_STATUS_BUF_SIZE 96
545
546 struct task_status_struct {
547         enum service_response resp;
548         enum exec_status      stat;
549         int  buf_valid_size;
550
551         u8   buf[SAS_STATUS_BUF_SIZE];
552
553         u32  residual;
554         enum sas_open_rej_reason open_rej_reason;
555 };
556
557 /* ATA and ATAPI task queuable to a SAS LLDD.
558  */
559 struct sas_ata_task {
560         struct host_to_dev_fis fis;
561         u8     atapi_packet[16];  /* 0 if not ATAPI task */
562
563         u8     retry_count;       /* hardware retry, should be > 0 */
564
565         u8     dma_xfer:1;        /* PIO:0 or DMA:1 */
566         u8     use_ncq:1;
567         u8     set_affil_pol:1;
568         u8     stp_affil_pol:1;
569
570         u8     device_control_reg_update:1;
571 };
572
573 struct sas_smp_task {
574         struct scatterlist smp_req;
575         struct scatterlist smp_resp;
576 };
577
578 enum task_attribute {
579         TASK_ATTR_SIMPLE = 0,
580         TASK_ATTR_HOQ    = 1,
581         TASK_ATTR_ORDERED= 2,
582         TASK_ATTR_ACA    = 4,
583 };
584
585 struct sas_ssp_task {
586         u8     retry_count;       /* hardware retry, should be > 0 */
587
588         u8     LUN[8];
589         u8     enable_first_burst:1;
590         enum   task_attribute task_attr;
591         u8     task_prio;
592         struct scsi_cmnd *cmd;
593 };
594
595 struct sas_task {
596         struct domain_device *dev;
597
598         spinlock_t   task_state_lock;
599         unsigned     task_state_flags;
600
601         enum   sas_protocol      task_proto;
602
603         union {
604                 struct sas_ata_task ata_task;
605                 struct sas_smp_task smp_task;
606                 struct sas_ssp_task ssp_task;
607         };
608
609         struct scatterlist *scatter;
610         int    num_scatter;
611         u32    total_xfer_len;
612         u8     data_dir:2;        /* Use PCI_DMA_... */
613
614         struct task_status_struct task_status;
615         void   (*task_done)(struct sas_task *);
616
617         void   *lldd_task;        /* for use by LLDDs */
618         void   *uldd_task;
619         struct sas_task_slow *slow_task;
620 };
621
622 struct sas_task_slow {
623         /* standard/extra infrastructure for slow path commands (SMP and
624          * internal lldd commands
625          */
626         struct timer_list     timer;
627         struct completion     completion;
628         struct sas_task       *task;
629 };
630
631 #define SAS_TASK_STATE_PENDING      1
632 #define SAS_TASK_STATE_DONE         2
633 #define SAS_TASK_STATE_ABORTED      4
634 #define SAS_TASK_NEED_DEV_RESET     8
635 #define SAS_TASK_AT_INITIATOR       16
636
637 extern struct sas_task *sas_alloc_task(gfp_t flags);
638 extern struct sas_task *sas_alloc_slow_task(gfp_t flags);
639 extern void sas_free_task(struct sas_task *task);
640
641 struct sas_domain_function_template {
642         /* The class calls these to notify the LLDD of an event. */
643         void (*lldd_port_formed)(struct asd_sas_phy *);
644         void (*lldd_port_deformed)(struct asd_sas_phy *);
645
646         /* The class calls these when a device is found or gone. */
647         int  (*lldd_dev_found)(struct domain_device *);
648         void (*lldd_dev_gone)(struct domain_device *);
649
650         int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
651
652         /* Task Management Functions. Must be called from process context. */
653         int (*lldd_abort_task)(struct sas_task *);
654         int (*lldd_abort_task_set)(struct domain_device *, u8 *lun);
655         int (*lldd_clear_aca)(struct domain_device *, u8 *lun);
656         int (*lldd_clear_task_set)(struct domain_device *, u8 *lun);
657         int (*lldd_I_T_nexus_reset)(struct domain_device *);
658         int (*lldd_ata_check_ready)(struct domain_device *);
659         void (*lldd_ata_set_dmamode)(struct domain_device *);
660         int (*lldd_lu_reset)(struct domain_device *, u8 *lun);
661         int (*lldd_query_task)(struct sas_task *);
662
663         /* Port and Adapter management */
664         int (*lldd_clear_nexus_port)(struct asd_sas_port *);
665         int (*lldd_clear_nexus_ha)(struct sas_ha_struct *);
666
667         /* Phy management */
668         int (*lldd_control_phy)(struct asd_sas_phy *, enum phy_func, void *);
669
670         /* GPIO support */
671         int (*lldd_write_gpio)(struct sas_ha_struct *, u8 reg_type,
672                                u8 reg_index, u8 reg_count, u8 *write_data);
673 };
674
675 extern int sas_register_ha(struct sas_ha_struct *);
676 extern int sas_unregister_ha(struct sas_ha_struct *);
677 extern void sas_prep_resume_ha(struct sas_ha_struct *sas_ha);
678 extern void sas_resume_ha(struct sas_ha_struct *sas_ha);
679 extern void sas_suspend_ha(struct sas_ha_struct *sas_ha);
680
681 int sas_set_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates);
682 int sas_phy_reset(struct sas_phy *phy, int hard_reset);
683 extern int sas_queuecommand(struct Scsi_Host *, struct scsi_cmnd *);
684 extern int sas_target_alloc(struct scsi_target *);
685 extern int sas_slave_configure(struct scsi_device *);
686 extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
687 extern int sas_bios_param(struct scsi_device *, struct block_device *,
688                           sector_t capacity, int *hsc);
689 extern struct scsi_transport_template *
690 sas_domain_attach_transport(struct sas_domain_function_template *);
691 extern struct device_attribute dev_attr_phy_event_threshold;
692
693 int  sas_discover_root_expander(struct domain_device *);
694
695 void sas_init_ex_attr(void);
696
697 int  sas_ex_revalidate_domain(struct domain_device *);
698
699 void sas_unregister_domain_devices(struct asd_sas_port *port, int gone);
700 void sas_init_disc(struct sas_discovery *disc, struct asd_sas_port *);
701 int  sas_discover_event(struct asd_sas_port *, enum discover_event ev);
702
703 int  sas_discover_sata(struct domain_device *);
704 int  sas_discover_end_dev(struct domain_device *);
705
706 void sas_unregister_dev(struct asd_sas_port *port, struct domain_device *);
707
708 void sas_init_dev(struct domain_device *);
709
710 void sas_task_abort(struct sas_task *);
711 int sas_eh_abort_handler(struct scsi_cmnd *cmd);
712 int sas_eh_device_reset_handler(struct scsi_cmnd *cmd);
713 int sas_eh_target_reset_handler(struct scsi_cmnd *cmd);
714
715 extern void sas_target_destroy(struct scsi_target *);
716 extern int sas_slave_alloc(struct scsi_device *);
717 extern int sas_ioctl(struct scsi_device *sdev, unsigned int cmd,
718                      void __user *arg);
719 extern int sas_drain_work(struct sas_ha_struct *ha);
720
721 extern void sas_ssp_task_response(struct device *dev, struct sas_task *task,
722                                   struct ssp_response_iu *iu);
723 struct sas_phy *sas_get_local_phy(struct domain_device *dev);
724
725 int sas_request_addr(struct Scsi_Host *shost, u8 *addr);
726
727 #endif /* _SASLIB_H_ */