net/bluetooth/hci_conn.c

   1 /*
   2    BlueZ - Bluetooth protocol stack for Linux
   3    Copyright (c) 2000-2001, 2010, Code Aurora Forum. All rights reserved.
   4
   5    Written 2000,2001 by Maxim Krasnyansky <maxk@qualcomm.com>
   6
   7    This program is free software; you can redistribute it and/or modify
   8    it under the terms of the GNU General Public License version 2 as
   9    published by the Free Software Foundation;
  10
  11    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
  12    OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  13    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS.
  14    IN NO EVENT SHALL THE COPYRIGHT HOLDER(S) AND AUTHOR(S) BE LIABLE FOR ANY
  15    CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES
  16    WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  17    ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  18    OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  19
  20    ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PATENTS,
  21    COPYRIGHTS, TRADEMARKS OR OTHER RIGHTS, RELATING TO USE OF THIS
  22    SOFTWARE IS DISCLAIMED.
  23 */
  24
  25 /* Bluetooth HCI connection handling. */
  26
  27 #include <linux/export.h>
  28 #include <linux/debugfs.h>
  29
  30 #include <net/bluetooth/bluetooth.h>
  31 #include <net/bluetooth/hci_core.h>
  32 #include <net/bluetooth/l2cap.h>
  33
  34 #include "hci_request.h"
  35 #include "smp.h"
  36 #include "a2mp.h"
  37
  38 struct sco_param {
  39         u16 pkt_type;
  40         u16 max_latency;
  41         u8  retrans_effort;
  42 };
  43
  44 static const struct sco_param esco_param_cvsd[] = {
  45         { EDR_ESCO_MASK & ~ESCO_2EV3, 0x000a,   0x01 }, /* S3 */
  46         { EDR_ESCO_MASK & ~ESCO_2EV3, 0x0007,   0x01 }, /* S2 */
  47         { EDR_ESCO_MASK | ESCO_EV3,   0x0007,   0x01 }, /* S1 */
  48         { EDR_ESCO_MASK | ESCO_HV3,   0xffff,   0x01 }, /* D1 */
  49         { EDR_ESCO_MASK | ESCO_HV1,   0xffff,   0x01 }, /* D0 */
  50 };
  51
  52 static const struct sco_param sco_param_cvsd[] = {
  53         { EDR_ESCO_MASK | ESCO_HV3,   0xffff,   0xff }, /* D1 */
  54         { EDR_ESCO_MASK | ESCO_HV1,   0xffff,   0xff }, /* D0 */
  55 };
  56
  57 static const struct sco_param esco_param_msbc[] = {
  58         { EDR_ESCO_MASK & ~ESCO_2EV3, 0x000d,   0x02 }, /* T2 */
  59         { EDR_ESCO_MASK | ESCO_EV3,   0x0008,   0x02 }, /* T1 */
  60 };
  61
  62 /* This function requires the caller holds hdev->lock */
  63 static void hci_connect_le_scan_cleanup(struct hci_conn *conn)
  64 {
  65         struct hci_conn_params *params;
  66         struct hci_dev *hdev = conn->hdev;
  67         struct smp_irk *irk;
  68         bdaddr_t *bdaddr;
  69         u8 bdaddr_type;
  70
  71         bdaddr = &conn->dst;
  72         bdaddr_type = conn->dst_type;
  73
  74         /* Check if we need to convert to identity address */
  75         irk = hci_get_irk(hdev, bdaddr, bdaddr_type);
  76         if (irk) {
  77                 bdaddr = &irk->bdaddr;
  78                 bdaddr_type = irk->addr_type;
  79         }
  80
  81         params = hci_pend_le_action_lookup(&hdev->pend_le_conns, bdaddr,
  82                                            bdaddr_type);
  83         if (!params || !params->explicit_connect)
  84                 return;
  85
  86         /* The connection attempt was doing scan for new RPA, and is
  87          * in scan phase. If params are not associated with any other
  88          * autoconnect action, remove them completely. If they are, just unmark
  89          * them as waiting for connection, by clearing explicit_connect field.
  90          */
  91         params->explicit_connect = false;
  92
  93         list_del_init(&params->action);
  94
  95         switch (params->auto_connect) {
  96         case HCI_AUTO_CONN_EXPLICIT:
  97                 hci_conn_params_del(hdev, bdaddr, bdaddr_type);
  98                 /* return instead of break to avoid duplicate scan update */
  99                 return;
 100         case HCI_AUTO_CONN_DIRECT:
 101         case HCI_AUTO_CONN_ALWAYS:
 102                 list_add(&params->action, &hdev->pend_le_conns);
 103                 break;
 104         case HCI_AUTO_CONN_REPORT:
 105                 list_add(&params->action, &hdev->pend_le_reports);
 106                 break;
 107         default:
 108                 break;
 109         }
 110
 111         hci_update_background_scan(hdev);
 112 }
 113
 114 static void hci_conn_cleanup(struct hci_conn *conn)
 115 {
 116         struct hci_dev *hdev = conn->hdev;
 117
 118         if (test_bit(HCI_CONN_PARAM_REMOVAL_PEND, &conn->flags))
 119                 hci_conn_params_del(conn->hdev, &conn->dst, conn->dst_type);
 120
 121         hci_chan_list_flush(conn);
 122
 123         hci_conn_hash_del(hdev, conn);
 124
 125         if (hdev->notify)
 126                 hdev->notify(hdev, HCI_NOTIFY_CONN_DEL);
 127
 128         hci_conn_del_sysfs(conn);
 129
 130         debugfs_remove_recursive(conn->debugfs);
 131
 132         hci_dev_put(hdev);
 133
 134         hci_conn_put(conn);
 135 }
 136
 137 static void le_scan_cleanup(struct work_struct *work)
 138 {
 139         struct hci_conn *conn = container_of(work, struct hci_conn,
 140                                              le_scan_cleanup);
 141         struct hci_dev *hdev = conn->hdev;
 142         struct hci_conn *c = NULL;
 143
 144         BT_DBG("%s hcon %p", hdev->name, conn);
 145
 146         hci_dev_lock(hdev);
 147
 148         /* Check that the hci_conn is still around */
 149         rcu_read_lock();
 150         list_for_each_entry_rcu(c, &hdev->conn_hash.list, list) {
 151                 if (c == conn)
 152                         break;
 153         }
 154         rcu_read_unlock();
 155
 156         if (c == conn) {
 157                 hci_connect_le_scan_cleanup(conn);
 158                 hci_conn_cleanup(conn);
 159         }
 160
 161         hci_dev_unlock(hdev);
 162         hci_dev_put(hdev);
 163         hci_conn_put(conn);
 164 }
 165
 166 static void hci_connect_le_scan_remove(struct hci_conn *conn)
 167 {
 168         BT_DBG("%s hcon %p", conn->hdev->name, conn);
 169
 170         /* We can't call hci_conn_del/hci_conn_cleanup here since that
 171          * could deadlock with another hci_conn_del() call that's holding
 172          * hci_dev_lock and doing cancel_delayed_work_sync(&conn->disc_work).
 173          * Instead, grab temporary extra references to the hci_dev and
 174          * hci_conn and perform the necessary cleanup in a separate work
 175          * callback.
 176          */
 177
 178         hci_dev_hold(conn->hdev);
 179         hci_conn_get(conn);
 180
 181         /* Even though we hold a reference to the hdev, many other
 182          * things might get cleaned up meanwhile, including the hdev's
 183          * own workqueue, so we can't use that for scheduling.
 184          */
 185         schedule_work(&conn->le_scan_cleanup);
 186 }
 187
 188 static void hci_acl_create_connection(struct hci_conn *conn)
 189 {
 190         struct hci_dev *hdev = conn->hdev;
 191         struct inquiry_entry *ie;
 192         struct hci_cp_create_conn cp;
 193
 194         BT_DBG("hcon %p", conn);
 195
 196         conn->state = BT_CONNECT;
 197         conn->out = true;
 198         conn->role = HCI_ROLE_MASTER;
 199
 200         conn->attempt++;
 201
 202         conn->link_policy = hdev->link_policy;
 203
 204         memset(&cp, 0, sizeof(cp));
 205         bacpy(&cp.bdaddr, &conn->dst);
 206         cp.pscan_rep_mode = 0x02;
 207
 208         ie = hci_inquiry_cache_lookup(hdev, &conn->dst);
 209         if (ie) {
 210                 if (inquiry_entry_age(ie) <= INQUIRY_ENTRY_AGE_MAX) {
 211                         cp.pscan_rep_mode = ie->data.pscan_rep_mode;
 212                         cp.pscan_mode     = ie->data.pscan_mode;
 213                         cp.clock_offset   = ie->data.clock_offset |
 214                                             cpu_to_le16(0x8000);
 215                 }
 216
 217                 memcpy(conn->dev_class, ie->data.dev_class, 3);
 218                 if (ie->data.ssp_mode > 0)
 219                         set_bit(HCI_CONN_SSP_ENABLED, &conn->flags);
 220         }
 221
 222         cp.pkt_type = cpu_to_le16(conn->pkt_type);
 223         if (lmp_rswitch_capable(hdev) && !(hdev->link_mode & HCI_LM_MASTER))
 224                 cp.role_switch = 0x01;
 225         else
 226                 cp.role_switch = 0x00;
 227
 228         hci_send_cmd(hdev, HCI_OP_CREATE_CONN, sizeof(cp), &cp);
 229 }
 230
 231 int hci_disconnect(struct hci_conn *conn, __u8 reason)
 232 {
 233         BT_DBG("hcon %p", conn);
 234
 235         /* When we are master of an established connection and it enters
 236          * the disconnect timeout, then go ahead and try to read the
 237          * current clock offset.  Processing of the result is done
 238          * within the event handling and hci_clock_offset_evt function.
 239          */
 240         if (conn->type == ACL_LINK && conn->role == HCI_ROLE_MASTER &&
 241             (conn->state == BT_CONNECTED || conn->state == BT_CONFIG)) {
 242                 struct hci_dev *hdev = conn->hdev;
 243                 struct hci_cp_read_clock_offset clkoff_cp;
 244
 245                 clkoff_cp.handle = cpu_to_le16(conn->handle);
 246                 hci_send_cmd(hdev, HCI_OP_READ_CLOCK_OFFSET, sizeof(clkoff_cp),
 247                              &clkoff_cp);
 248         }
 249
 250         return hci_abort_conn(conn, reason);
 251 }
 252
 253 static void hci_add_sco(struct hci_conn *conn, __u16 handle)
 254 {
 255         struct hci_dev *hdev = conn->hdev;
 256         struct hci_cp_add_sco cp;
 257
 258         BT_DBG("hcon %p", conn);
 259
 260         conn->state = BT_CONNECT;
 261         conn->out = true;
 262
 263         conn->attempt++;
 264
 265         cp.handle   = cpu_to_le16(handle);
 266         cp.pkt_type = cpu_to_le16(conn->pkt_type);
 267
 268         hci_send_cmd(hdev, HCI_OP_ADD_SCO, sizeof(cp), &cp);
 269 }
 270
 271 bool hci_setup_sync(struct hci_conn *conn, __u16 handle)
 272 {
 273         struct hci_dev *hdev = conn->hdev;
 274         struct hci_cp_setup_sync_conn cp;
 275         const struct sco_param *param;
 276
 277         BT_DBG("hcon %p", conn);
 278
 279         conn->state = BT_CONNECT;
 280         conn->out = true;
 281
 282         conn->attempt++;
 283
 284         cp.handle   = cpu_to_le16(handle);
 285
 286         cp.tx_bandwidth   = cpu_to_le32(0x00001f40);
 287         cp.rx_bandwidth   = cpu_to_le32(0x00001f40);
 288         cp.voice_setting  = cpu_to_le16(conn->setting);
 289
 290         switch (conn->setting & SCO_AIRMODE_MASK) {
 291         case SCO_AIRMODE_TRANSP:
 292                 if (conn->attempt > ARRAY_SIZE(esco_param_msbc))
 293                         return false;
 294                 param = &esco_param_msbc[conn->attempt - 1];
 295                 break;
 296         case SCO_AIRMODE_CVSD:
 297                 if (lmp_esco_capable(conn->link)) {
 298                         if (conn->attempt > ARRAY_SIZE(esco_param_cvsd))
 299                                 return false;
 300                         param = &esco_param_cvsd[conn->attempt - 1];
 301                 } else {
 302                         if (conn->attempt > ARRAY_SIZE(sco_param_cvsd))
 303                                 return false;
 304                         param = &sco_param_cvsd[conn->attempt - 1];
 305                 }
 306                 break;
 307         default:
 308                 return false;
 309         }
 310
 311         cp.retrans_effort = param->retrans_effort;
 312         cp.pkt_type = __cpu_to_le16(param->pkt_type);
 313         cp.max_latency = __cpu_to_le16(param->max_latency);
 314
 315         if (hci_send_cmd(hdev, HCI_OP_SETUP_SYNC_CONN, sizeof(cp), &cp) < 0)
 316                 return false;
 317
 318         return true;
 319 }
 320
 321 u8 hci_le_conn_update(struct hci_conn *conn, u16 min, u16 max, u16 latency,
 322                       u16 to_multiplier)
 323 {
 324         struct hci_dev *hdev = conn->hdev;
 325         struct hci_conn_params *params;
 326         struct hci_cp_le_conn_update cp;
 327
 328         hci_dev_lock(hdev);
 329
 330         params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
 331         if (params) {
 332                 params->conn_min_interval = min;
 333                 params->conn_max_interval = max;
 334                 params->conn_latency = latency;
 335                 params->supervision_timeout = to_multiplier;
 336         }
 337
 338         hci_dev_unlock(hdev);
 339
 340         memset(&cp, 0, sizeof(cp));
 341         cp.handle               = cpu_to_le16(conn->handle);
 342         cp.conn_interval_min    = cpu_to_le16(min);
 343         cp.conn_interval_max    = cpu_to_le16(max);
 344         cp.conn_latency         = cpu_to_le16(latency);
 345         cp.supervision_timeout  = cpu_to_le16(to_multiplier);
 346         cp.min_ce_len           = cpu_to_le16(0x0000);
 347         cp.max_ce_len           = cpu_to_le16(0x0000);
 348
 349         hci_send_cmd(hdev, HCI_OP_LE_CONN_UPDATE, sizeof(cp), &cp);
 350
 351         if (params)
 352                 return 0x01;
 353
 354         return 0x00;
 355 }
 356
 357 void hci_le_start_enc(struct hci_conn *conn, __le16 ediv, __le64 rand,
 358                       __u8 ltk[16], __u8 key_size)
 359 {
 360         struct hci_dev *hdev = conn->hdev;
 361         struct hci_cp_le_start_enc cp;
 362
 363         BT_DBG("hcon %p", conn);
 364
 365         memset(&cp, 0, sizeof(cp));
 366
 367         cp.handle = cpu_to_le16(conn->handle);
 368         cp.rand = rand;
 369         cp.ediv = ediv;
 370         memcpy(cp.ltk, ltk, key_size);
 371
 372         hci_send_cmd(hdev, HCI_OP_LE_START_ENC, sizeof(cp), &cp);
 373 }
 374
 375 /* Device _must_ be locked */
 376 void hci_sco_setup(struct hci_conn *conn, __u8 status)
 377 {
 378         struct hci_conn *sco = conn->link;
 379
 380         if (!sco)
 381                 return;
 382
 383         BT_DBG("hcon %p", conn);
 384
 385         if (!status) {
 386                 if (lmp_esco_capable(conn->hdev))
 387                         hci_setup_sync(sco, conn->handle);
 388                 else
 389                         hci_add_sco(sco, conn->handle);
 390         } else {
 391                 hci_connect_cfm(sco, status);
 392                 hci_conn_del(sco);
 393         }
 394 }
 395
 396 static void hci_conn_timeout(struct work_struct *work)
 397 {
 398         struct hci_conn *conn = container_of(work, struct hci_conn,
 399                                              disc_work.work);
 400         int refcnt = atomic_read(&conn->refcnt);
 401
 402         BT_DBG("hcon %p state %s", conn, state_to_string(conn->state));
 403
 404         WARN_ON(refcnt < 0);
 405
 406         /* FIXME: It was observed that in pairing failed scenario, refcnt
 407          * drops below 0. Probably this is because l2cap_conn_del calls
 408          * l2cap_chan_del for each channel, and inside l2cap_chan_del conn is
 409          * dropped. After that loop hci_chan_del is called which also drops
 410          * conn. For now make sure that ACL is alive if refcnt is higher then 0,
 411          * otherwise drop it.
 412          */
 413         if (refcnt > 0)
 414                 return;
 415
 416         /* LE connections in scanning state need special handling */
 417         if (conn->state == BT_CONNECT && conn->type == LE_LINK &&
 418             test_bit(HCI_CONN_SCANNING, &conn->flags)) {
 419                 hci_connect_le_scan_remove(conn);
 420                 return;
 421         }
 422
 423         hci_abort_conn(conn, hci_proto_disconn_ind(conn));
 424 }
 425
 426 /* Enter sniff mode */
 427 static void hci_conn_idle(struct work_struct *work)
 428 {
 429         struct hci_conn *conn = container_of(work, struct hci_conn,
 430                                              idle_work.work);
 431         struct hci_dev *hdev = conn->hdev;
 432
 433         BT_DBG("hcon %p mode %d", conn, conn->mode);
 434
 435         if (!lmp_sniff_capable(hdev) || !lmp_sniff_capable(conn))
 436                 return;
 437
 438         if (conn->mode != HCI_CM_ACTIVE || !(conn->link_policy & HCI_LP_SNIFF))
 439                 return;
 440
 441         if (lmp_sniffsubr_capable(hdev) && lmp_sniffsubr_capable(conn)) {
 442                 struct hci_cp_sniff_subrate cp;
 443                 cp.handle             = cpu_to_le16(conn->handle);
 444                 cp.max_latency        = cpu_to_le16(0);
 445                 cp.min_remote_timeout = cpu_to_le16(0);
 446                 cp.min_local_timeout  = cpu_to_le16(0);
 447                 hci_send_cmd(hdev, HCI_OP_SNIFF_SUBRATE, sizeof(cp), &cp);
 448         }
 449
 450         if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
 451                 struct hci_cp_sniff_mode cp;
 452                 cp.handle       = cpu_to_le16(conn->handle);
 453                 cp.max_interval = cpu_to_le16(hdev->sniff_max_interval);
 454                 cp.min_interval = cpu_to_le16(hdev->sniff_min_interval);
 455                 cp.attempt      = cpu_to_le16(4);
 456                 cp.timeout      = cpu_to_le16(1);
 457                 hci_send_cmd(hdev, HCI_OP_SNIFF_MODE, sizeof(cp), &cp);
 458         }
 459 }
 460
 461 static void hci_conn_auto_accept(struct work_struct *work)
 462 {
 463         struct hci_conn *conn = container_of(work, struct hci_conn,
 464                                              auto_accept_work.work);
 465
 466         hci_send_cmd(conn->hdev, HCI_OP_USER_CONFIRM_REPLY, sizeof(conn->dst),
 467                      &conn->dst);
 468 }
 469
 470 static void le_conn_timeout(struct work_struct *work)
 471 {
 472         struct hci_conn *conn = container_of(work, struct hci_conn,
 473                                              le_conn_timeout.work);
 474         struct hci_dev *hdev = conn->hdev;
 475
 476         BT_DBG("");
 477
 478         /* We could end up here due to having done directed advertising,
 479          * so clean up the state if necessary. This should however only
 480          * happen with broken hardware or if low duty cycle was used
 481          * (which doesn't have a timeout of its own).
 482          */
 483         if (conn->role == HCI_ROLE_SLAVE) {
 484                 u8 enable = 0x00;
 485                 hci_send_cmd(hdev, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
 486                              &enable);
 487                 hci_le_conn_failed(conn, HCI_ERROR_ADVERTISING_TIMEOUT);
 488                 return;
 489         }
 490
 491         hci_abort_conn(conn, HCI_ERROR_REMOTE_USER_TERM);
 492 }
 493
 494 struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst,
 495                               u8 role)
 496 {
 497         struct hci_conn *conn;
 498
 499         BT_DBG("%s dst %pMR", hdev->name, dst);
 500
 501         conn = kzalloc(sizeof(*conn), GFP_KERNEL);
 502         if (!conn)
 503                 return NULL;
 504
 505         bacpy(&conn->dst, dst);
 506         bacpy(&conn->src, &hdev->bdaddr);
 507         conn->hdev  = hdev;
 508         conn->type  = type;
 509         conn->role  = role;
 510         conn->mode  = HCI_CM_ACTIVE;
 511         conn->state = BT_OPEN;
 512         conn->auth_type = HCI_AT_GENERAL_BONDING;
 513         conn->io_capability = hdev->io_capability;
 514         conn->remote_auth = 0xff;
 515         conn->key_type = 0xff;
 516         conn->rssi = HCI_RSSI_INVALID;
 517         conn->tx_power = HCI_TX_POWER_INVALID;
 518         conn->max_tx_power = HCI_TX_POWER_INVALID;
 519
 520         set_bit(HCI_CONN_POWER_SAVE, &conn->flags);
 521         conn->disc_timeout = HCI_DISCONN_TIMEOUT;
 522
 523         if (conn->role == HCI_ROLE_MASTER)
 524                 conn->out = true;
 525
 526         switch (type) {
 527         case ACL_LINK:
 528                 conn->pkt_type = hdev->pkt_type & ACL_PTYPE_MASK;
 529                 break;
 530         case LE_LINK:
 531                 /* conn->src should reflect the local identity address */
 532                 hci_copy_identity_address(hdev, &conn->src, &conn->src_type);
 533                 break;
 534         case SCO_LINK:
 535                 if (lmp_esco_capable(hdev))
 536                         conn->pkt_type = (hdev->esco_type & SCO_ESCO_MASK) |
 537                                         (hdev->esco_type & EDR_ESCO_MASK);
 538                 else
 539                         conn->pkt_type = hdev->pkt_type & SCO_PTYPE_MASK;
 540                 break;
 541         case ESCO_LINK:
 542                 conn->pkt_type = hdev->esco_type & ~EDR_ESCO_MASK;
 543                 break;
 544         }
 545
 546         skb_queue_head_init(&conn->data_q);
 547
 548         INIT_LIST_HEAD(&conn->chan_list);
 549
 550         INIT_DELAYED_WORK(&conn->disc_work, hci_conn_timeout);
 551         INIT_DELAYED_WORK(&conn->auto_accept_work, hci_conn_auto_accept);
 552         INIT_DELAYED_WORK(&conn->idle_work, hci_conn_idle);
 553         INIT_DELAYED_WORK(&conn->le_conn_timeout, le_conn_timeout);
 554         INIT_WORK(&conn->le_scan_cleanup, le_scan_cleanup);
 555
 556         atomic_set(&conn->refcnt, 0);
 557
 558         hci_dev_hold(hdev);
 559
 560         hci_conn_hash_add(hdev, conn);
 561         if (hdev->notify)
 562                 hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
 563
 564         hci_conn_init_sysfs(conn);
 565
 566         return conn;
 567 }
 568
 569 int hci_conn_del(struct hci_conn *conn)
 570 {
 571         struct hci_dev *hdev = conn->hdev;
 572
 573         BT_DBG("%s hcon %p handle %d", hdev->name, conn, conn->handle);
 574
 575         cancel_delayed_work_sync(&conn->disc_work);
 576         cancel_delayed_work_sync(&conn->auto_accept_work);
 577         cancel_delayed_work_sync(&conn->idle_work);
 578
 579         if (conn->type == ACL_LINK) {
 580                 struct hci_conn *sco = conn->link;
 581                 if (sco)
 582                         sco->link = NULL;
 583
 584                 /* Unacked frames */
 585                 hdev->acl_cnt += conn->sent;
 586         } else if (conn->type == LE_LINK) {
 587                 cancel_delayed_work(&conn->le_conn_timeout);
 588
 589                 if (hdev->le_pkts)
 590                         hdev->le_cnt += conn->sent;
 591                 else
 592                         hdev->acl_cnt += conn->sent;
 593         } else {
 594                 struct hci_conn *acl = conn->link;
 595                 if (acl) {
 596                         acl->link = NULL;
 597                         hci_conn_drop(acl);
 598                 }
 599         }
 600
 601         if (conn->amp_mgr)
 602                 amp_mgr_put(conn->amp_mgr);
 603
 604         skb_queue_purge(&conn->data_q);
 605
 606         /* Remove the connection from the list and cleanup its remaining
 607          * state. This is a separate function since for some cases like
 608          * BT_CONNECT_SCAN we *only* want the cleanup part without the
 609          * rest of hci_conn_del.
 610          */
 611         hci_conn_cleanup(conn);
 612
 613         return 0;
 614 }
 615
 616 struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src, uint8_t src_type)
 617 {
 618         int use_src = bacmp(src, BDADDR_ANY);
 619         struct hci_dev *hdev = NULL, *d;
 620
 621         BT_DBG("%pMR -> %pMR", src, dst);
 622
 623         read_lock(&hci_dev_list_lock);
 624
 625         list_for_each_entry(d, &hci_dev_list, list) {
 626                 if (!test_bit(HCI_UP, &d->flags) ||
 627                     hci_dev_test_flag(d, HCI_USER_CHANNEL) ||
 628                     d->dev_type != HCI_PRIMARY)
 629                         continue;
 630
 631                 /* Simple routing:
 632                  *   No source address - find interface with bdaddr != dst
 633                  *   Source address    - find interface with bdaddr == src
 634                  */
 635
 636                 if (use_src) {
 637                         bdaddr_t id_addr;
 638                         u8 id_addr_type;
 639
 640                         if (src_type == BDADDR_BREDR) {
 641                                 if (!lmp_bredr_capable(d))
 642                                         continue;
 643                                 bacpy(&id_addr, &d->bdaddr);
 644                                 id_addr_type = BDADDR_BREDR;
 645                         } else {
 646                                 if (!lmp_le_capable(d))
 647                                         continue;
 648
 649                                 hci_copy_identity_address(d, &id_addr,
 650                                                           &id_addr_type);
 651
 652                                 /* Convert from HCI to three-value type */
 653                                 if (id_addr_type == ADDR_LE_DEV_PUBLIC)
 654                                         id_addr_type = BDADDR_LE_PUBLIC;
 655                                 else
 656                                         id_addr_type = BDADDR_LE_RANDOM;
 657                         }
 658
 659                         if (!bacmp(&id_addr, src) && id_addr_type == src_type) {
 660                                 hdev = d; break;
 661                         }
 662                 } else {
 663                         if (bacmp(&d->bdaddr, dst)) {
 664                                 hdev = d; break;
 665                         }
 666                 }
 667         }
 668
 669         if (hdev)
 670                 hdev = hci_dev_hold(hdev);
 671
 672         read_unlock(&hci_dev_list_lock);
 673         return hdev;
 674 }
 675 EXPORT_SYMBOL(hci_get_route);
 676
 677 /* This function requires the caller holds hdev->lock */
 678 void hci_le_conn_failed(struct hci_conn *conn, u8 status)
 679 {
 680         struct hci_dev *hdev = conn->hdev;
 681         struct hci_conn_params *params;
 682
 683         params = hci_pend_le_action_lookup(&hdev->pend_le_conns, &conn->dst,
 684                                            conn->dst_type);
 685         if (params && params->conn) {
 686                 hci_conn_drop(params->conn);
 687                 hci_conn_put(params->conn);
 688                 params->conn = NULL;
 689         }
 690
 691         conn->state = BT_CLOSED;
 692
 693         /* If the status indicates successful cancellation of
 694          * the attempt (i.e. Unkown Connection Id) there's no point of
 695          * notifying failure since we'll go back to keep trying to
 696          * connect. The only exception is explicit connect requests
 697          * where a timeout + cancel does indicate an actual failure.
 698          */
 699         if (status != HCI_ERROR_UNKNOWN_CONN_ID ||
 700             (params && params->explicit_connect))
 701                 mgmt_connect_failed(hdev, &conn->dst, conn->type,
 702                                     conn->dst_type, status);
 703
 704         hci_connect_cfm(conn, status);
 705
 706         hci_conn_del(conn);
 707
 708         /* Since we may have temporarily stopped the background scanning in
 709          * favor of connection establishment, we should restart it.
 710          */
 711         hci_update_background_scan(hdev);
 712
 713         /* Re-enable advertising in case this was a failed connection
 714          * attempt as a peripheral.
 715          */
 716         hci_req_reenable_advertising(hdev);
 717 }
 718
 719 static void create_le_conn_complete(struct hci_dev *hdev, u8 status, u16 opcode)
 720 {
 721         struct hci_conn *conn;
 722
 723         hci_dev_lock(hdev);
 724
 725         conn = hci_lookup_le_connect(hdev);
 726
 727         if (!status) {
 728                 hci_connect_le_scan_cleanup(conn);
 729                 goto done;
 730         }
 731
 732         bt_dev_err(hdev, "request failed to create LE connection: "
 733                    "status 0x%2.2x", status);
 734
 735         if (!conn)
 736                 goto done;
 737
 738         hci_le_conn_failed(conn, status);
 739
 740 done:
 741         hci_dev_unlock(hdev);
 742 }
 743
 744 static bool conn_use_rpa(struct hci_conn *conn)
 745 {
 746         struct hci_dev *hdev = conn->hdev;
 747
 748         return hci_dev_test_flag(hdev, HCI_PRIVACY);
 749 }
 750
 751 static void hci_req_add_le_create_conn(struct hci_request *req,
 752                                        struct hci_conn *conn,
 753                                        bdaddr_t *direct_rpa)
 754 {
 755         struct hci_cp_le_create_conn cp;
 756         struct hci_dev *hdev = conn->hdev;
 757         u8 own_addr_type;
 758
 759         /* If direct address was provided we use it instead of current
 760          * address.
 761          */
 762         if (direct_rpa) {
 763                 if (bacmp(&req->hdev->random_addr, direct_rpa))
 764                         hci_req_add(req, HCI_OP_LE_SET_RANDOM_ADDR, 6,
 765                                                                 direct_rpa);
 766
 767                 /* direct address is always RPA */
 768                 own_addr_type = ADDR_LE_DEV_RANDOM;
 769         } else {
 770                 /* Update random address, but set require_privacy to false so
 771                  * that we never connect with an non-resolvable address.
 772                  */
 773                 if (hci_update_random_address(req, false, conn_use_rpa(conn),
 774                                               &own_addr_type))
 775                         return;
 776         }
 777
 778         memset(&cp, 0, sizeof(cp));
 779
 780         /* Set window to be the same value as the interval to enable
 781          * continuous scanning.
 782          */
 783         cp.scan_interval = cpu_to_le16(hdev->le_scan_interval);
 784         cp.scan_window = cp.scan_interval;
 785
 786         bacpy(&cp.peer_addr, &conn->dst);
 787         cp.peer_addr_type = conn->dst_type;
 788         cp.own_address_type = own_addr_type;
 789         cp.conn_interval_min = cpu_to_le16(conn->le_conn_min_interval);
 790         cp.conn_interval_max = cpu_to_le16(conn->le_conn_max_interval);
 791         cp.conn_latency = cpu_to_le16(conn->le_conn_latency);
 792         cp.supervision_timeout = cpu_to_le16(conn->le_supv_timeout);
 793         cp.min_ce_len = cpu_to_le16(0x0000);
 794         cp.max_ce_len = cpu_to_le16(0x0000);
 795
 796         hci_req_add(req, HCI_OP_LE_CREATE_CONN, sizeof(cp), &cp);
 797
 798         conn->state = BT_CONNECT;
 799         clear_bit(HCI_CONN_SCANNING, &conn->flags);
 800 }
 801
 802 static void hci_req_directed_advertising(struct hci_request *req,
 803                                          struct hci_conn *conn)
 804 {
 805         struct hci_dev *hdev = req->hdev;
 806         struct hci_cp_le_set_adv_param cp;
 807         u8 own_addr_type;
 808         u8 enable;
 809
 810         /* Clear the HCI_LE_ADV bit temporarily so that the
 811          * hci_update_random_address knows that it's safe to go ahead
 812          * and write a new random address. The flag will be set back on
 813          * as soon as the SET_ADV_ENABLE HCI command completes.
 814          */
 815         hci_dev_clear_flag(hdev, HCI_LE_ADV);
 816
 817         /* Set require_privacy to false so that the remote device has a
 818          * chance of identifying us.
 819          */
 820         if (hci_update_random_address(req, false, conn_use_rpa(conn),
 821                                       &own_addr_type) < 0)
 822                 return;
 823
 824         memset(&cp, 0, sizeof(cp));
 825         cp.type = LE_ADV_DIRECT_IND;
 826         cp.own_address_type = own_addr_type;
 827         cp.direct_addr_type = conn->dst_type;
 828         bacpy(&cp.direct_addr, &conn->dst);
 829         cp.channel_map = hdev->le_adv_channel_map;
 830
 831         hci_req_add(req, HCI_OP_LE_SET_ADV_PARAM, sizeof(cp), &cp);
 832
 833         enable = 0x01;
 834         hci_req_add(req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable), &enable);
 835
 836         conn->state = BT_CONNECT;
 837 }
 838
 839 struct hci_conn *hci_connect_le(struct hci_dev *hdev, bdaddr_t *dst,
 840                                 u8 dst_type, u8 sec_level, u16 conn_timeout,
 841                                 u8 role, bdaddr_t *direct_rpa)
 842 {
 843         struct hci_conn_params *params;
 844         struct hci_conn *conn;
 845         struct smp_irk *irk;
 846         struct hci_request req;
 847         int err;
 848
 849         /* Let's make sure that le is enabled.*/
 850         if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
 851                 if (lmp_le_capable(hdev))
 852                         return ERR_PTR(-ECONNREFUSED);
 853
 854                 return ERR_PTR(-EOPNOTSUPP);
 855         }
 856
 857         /* Since the controller supports only one LE connection attempt at a
 858          * time, we return -EBUSY if there is any connection attempt running.
 859          */
 860         if (hci_lookup_le_connect(hdev))
 861                 return ERR_PTR(-EBUSY);
 862
 863         /* If there's already a connection object but it's not in
 864          * scanning state it means it must already be established, in
 865          * which case we can't do anything else except report a failure
 866          * to connect.
 867          */
 868         conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
 869         if (conn && !test_bit(HCI_CONN_SCANNING, &conn->flags)) {
 870                 return ERR_PTR(-EBUSY);
 871         }
 872
 873         /* When given an identity address with existing identity
 874          * resolving key, the connection needs to be established
 875          * to a resolvable random address.
 876          *
 877          * Storing the resolvable random address is required here
 878          * to handle connection failures. The address will later
 879          * be resolved back into the original identity address
 880          * from the connect request.
 881          */
 882         irk = hci_find_irk_by_addr(hdev, dst, dst_type);
 883         if (irk && bacmp(&irk->rpa, BDADDR_ANY)) {
 884                 dst = &irk->rpa;
 885                 dst_type = ADDR_LE_DEV_RANDOM;
 886         }
 887
 888         if (conn) {
 889                 bacpy(&conn->dst, dst);
 890         } else {
 891                 conn = hci_conn_add(hdev, LE_LINK, dst, role);
 892                 if (!conn)
 893                         return ERR_PTR(-ENOMEM);
 894                 hci_conn_hold(conn);
 895                 conn->pending_sec_level = sec_level;
 896         }
 897
 898         conn->dst_type = dst_type;
 899         conn->sec_level = BT_SECURITY_LOW;
 900         conn->conn_timeout = conn_timeout;
 901
 902         hci_req_init(&req, hdev);
 903
 904         /* Disable advertising if we're active. For master role
 905          * connections most controllers will refuse to connect if
 906          * advertising is enabled, and for slave role connections we
 907          * anyway have to disable it in order to start directed
 908          * advertising.
 909          */
 910         if (hci_dev_test_flag(hdev, HCI_LE_ADV)) {
 911                 u8 enable = 0x00;
 912                 hci_req_add(&req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(enable),
 913                             &enable);
 914         }
 915
 916         /* If requested to connect as slave use directed advertising */
 917         if (conn->role == HCI_ROLE_SLAVE) {
 918                 /* If we're active scanning most controllers are unable
 919                  * to initiate advertising. Simply reject the attempt.
 920                  */
 921                 if (hci_dev_test_flag(hdev, HCI_LE_SCAN) &&
 922                     hdev->le_scan_type == LE_SCAN_ACTIVE) {
 923                         hci_req_purge(&req);
 924                         hci_conn_del(conn);
 925                         return ERR_PTR(-EBUSY);
 926                 }
 927
 928                 hci_req_directed_advertising(&req, conn);
 929                 goto create_conn;
 930         }
 931
 932         params = hci_conn_params_lookup(hdev, &conn->dst, conn->dst_type);
 933         if (params) {
 934                 conn->le_conn_min_interval = params->conn_min_interval;
 935                 conn->le_conn_max_interval = params->conn_max_interval;
 936                 conn->le_conn_latency = params->conn_latency;
 937                 conn->le_supv_timeout = params->supervision_timeout;
 938         } else {
 939                 conn->le_conn_min_interval = hdev->le_conn_min_interval;
 940                 conn->le_conn_max_interval = hdev->le_conn_max_interval;
 941                 conn->le_conn_latency = hdev->le_conn_latency;
 942                 conn->le_supv_timeout = hdev->le_supv_timeout;
 943         }
 944
 945         /* If controller is scanning, we stop it since some controllers are
 946          * not able to scan and connect at the same time. Also set the
 947          * HCI_LE_SCAN_INTERRUPTED flag so that the command complete
 948          * handler for scan disabling knows to set the correct discovery
 949          * state.
 950          */
 951         if (hci_dev_test_flag(hdev, HCI_LE_SCAN)) {
 952                 hci_req_add_le_scan_disable(&req);
 953                 hci_dev_set_flag(hdev, HCI_LE_SCAN_INTERRUPTED);
 954         }
 955
 956         hci_req_add_le_create_conn(&req, conn, direct_rpa);
 957
 958 create_conn:
 959         err = hci_req_run(&req, create_le_conn_complete);
 960         if (err) {
 961                 hci_conn_del(conn);
 962                 return ERR_PTR(err);
 963         }
 964
 965         return conn;
 966 }
 967
 968 static bool is_connected(struct hci_dev *hdev, bdaddr_t *addr, u8 type)
 969 {
 970         struct hci_conn *conn;
 971
 972         conn = hci_conn_hash_lookup_le(hdev, addr, type);
 973         if (!conn)
 974                 return false;
 975
 976         if (conn->state != BT_CONNECTED)
 977                 return false;
 978
 979         return true;
 980 }
 981
 982 /* This function requires the caller holds hdev->lock */
 983 static int hci_explicit_conn_params_set(struct hci_dev *hdev,
 984                                         bdaddr_t *addr, u8 addr_type)
 985 {
 986         struct hci_conn_params *params;
 987
 988         if (is_connected(hdev, addr, addr_type))
 989                 return -EISCONN;
 990
 991         params = hci_conn_params_lookup(hdev, addr, addr_type);
 992         if (!params) {
 993                 params = hci_conn_params_add(hdev, addr, addr_type);
 994                 if (!params)
 995                         return -ENOMEM;
 996
 997                 /* If we created new params, mark them to be deleted in
 998                  * hci_connect_le_scan_cleanup. It's different case than
 999                  * existing disabled params, those will stay after cleanup.
1000                  */
1001                 params->auto_connect = HCI_AUTO_CONN_EXPLICIT;
1002         }
1003
1004         /* We're trying to connect, so make sure params are at pend_le_conns */
1005         if (params->auto_connect == HCI_AUTO_CONN_DISABLED ||
1006             params->auto_connect == HCI_AUTO_CONN_REPORT ||
1007             params->auto_connect == HCI_AUTO_CONN_EXPLICIT) {
1008                 list_del_init(&params->action);
1009                 list_add(&params->action, &hdev->pend_le_conns);
1010         }
1011
1012         params->explicit_connect = true;
1013
1014         BT_DBG("addr %pMR (type %u) auto_connect %u", addr, addr_type,
1015                params->auto_connect);
1016
1017         return 0;
1018 }
1019
1020 /* This function requires the caller holds hdev->lock */
1021 struct hci_conn *hci_connect_le_scan(struct hci_dev *hdev, bdaddr_t *dst,
1022                                      u8 dst_type, u8 sec_level,
1023                                      u16 conn_timeout)
1024 {
1025         struct hci_conn *conn;
1026
1027         /* Let's make sure that le is enabled.*/
1028         if (!hci_dev_test_flag(hdev, HCI_LE_ENABLED)) {
1029                 if (lmp_le_capable(hdev))
1030                         return ERR_PTR(-ECONNREFUSED);
1031
1032                 return ERR_PTR(-EOPNOTSUPP);
1033         }
1034
1035         /* Some devices send ATT messages as soon as the physical link is
1036          * established. To be able to handle these ATT messages, the user-
1037          * space first establishes the connection and then starts the pairing
1038          * process.
1039          *
1040          * So if a hci_conn object already exists for the following connection
1041          * attempt, we simply update pending_sec_level and auth_type fields
1042          * and return the object found.
1043          */
1044         conn = hci_conn_hash_lookup_le(hdev, dst, dst_type);
1045         if (conn) {
1046                 if (conn->pending_sec_level < sec_level)
1047                         conn->pending_sec_level = sec_level;
1048                 goto done;
1049         }
1050
1051         BT_DBG("requesting refresh of dst_addr");
1052
1053         conn = hci_conn_add(hdev, LE_LINK, dst, HCI_ROLE_MASTER);
1054         if (!conn)
1055                 return ERR_PTR(-ENOMEM);
1056
1057         if (hci_explicit_conn_params_set(hdev, dst, dst_type) < 0)
1058                 return ERR_PTR(-EBUSY);
1059
1060         conn->state = BT_CONNECT;
1061         set_bit(HCI_CONN_SCANNING, &conn->flags);
1062         conn->dst_type = dst_type;
1063         conn->sec_level = BT_SECURITY_LOW;
1064         conn->pending_sec_level = sec_level;
1065         conn->conn_timeout = conn_timeout;
1066
1067         hci_update_background_scan(hdev);
1068
1069 done:
1070         hci_conn_hold(conn);
1071         return conn;
1072 }
1073
1074 struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst,
1075                                  u8 sec_level, u8 auth_type)
1076 {
1077         struct hci_conn *acl;
1078
1079         if (!hci_dev_test_flag(hdev, HCI_BREDR_ENABLED)) {
1080                 if (lmp_bredr_capable(hdev))
1081                         return ERR_PTR(-ECONNREFUSED);
1082
1083                 return ERR_PTR(-EOPNOTSUPP);
1084         }
1085
1086         acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst);
1087         if (!acl) {
1088                 acl = hci_conn_add(hdev, ACL_LINK, dst, HCI_ROLE_MASTER);
1089                 if (!acl)
1090                         return ERR_PTR(-ENOMEM);
1091         }
1092
1093         hci_conn_hold(acl);
1094
1095         if (acl->state == BT_OPEN || acl->state == BT_CLOSED) {
1096                 acl->sec_level = BT_SECURITY_LOW;
1097                 acl->pending_sec_level = sec_level;
1098                 acl->auth_type = auth_type;
1099                 hci_acl_create_connection(acl);
1100         }
1101
1102         return acl;
1103 }
1104
1105 struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
1106                                  __u16 setting)
1107 {
1108         struct hci_conn *acl;
1109         struct hci_conn *sco;
1110
1111         acl = hci_connect_acl(hdev, dst, BT_SECURITY_LOW, HCI_AT_NO_BONDING);
1112         if (IS_ERR(acl))
1113                 return acl;
1114
1115         sco = hci_conn_hash_lookup_ba(hdev, type, dst);
1116         if (!sco) {
1117                 sco = hci_conn_add(hdev, type, dst, HCI_ROLE_MASTER);
1118                 if (!sco) {
1119                         hci_conn_drop(acl);
1120                         return ERR_PTR(-ENOMEM);
1121                 }
1122         }
1123
1124         acl->link = sco;
1125         sco->link = acl;
1126
1127         hci_conn_hold(sco);
1128
1129         sco->setting = setting;
1130
1131         if (acl->state == BT_CONNECTED &&
1132             (sco->state == BT_OPEN || sco->state == BT_CLOSED)) {
1133                 set_bit(HCI_CONN_POWER_SAVE, &acl->flags);
1134                 hci_conn_enter_active_mode(acl, BT_POWER_FORCE_ACTIVE_ON);
1135
1136                 if (test_bit(HCI_CONN_MODE_CHANGE_PEND, &acl->flags)) {
1137                         /* defer SCO setup until mode change completed */
1138                         set_bit(HCI_CONN_SCO_SETUP_PEND, &acl->flags);
1139                         return sco;
1140                 }
1141
1142                 hci_sco_setup(acl, 0x00);
1143         }
1144
1145         return sco;
1146 }
1147
1148 /* Check link security requirement */
1149 int hci_conn_check_link_mode(struct hci_conn *conn)
1150 {
1151         BT_DBG("hcon %p", conn);
1152
1153         /* In Secure Connections Only mode, it is required that Secure
1154          * Connections is used and the link is encrypted with AES-CCM
1155          * using a P-256 authenticated combination key.
1156          */
1157         if (hci_dev_test_flag(conn->hdev, HCI_SC_ONLY)) {
1158                 if (!hci_conn_sc_enabled(conn) ||
1159                     !test_bit(HCI_CONN_AES_CCM, &conn->flags) ||
1160                     conn->key_type != HCI_LK_AUTH_COMBINATION_P256)
1161                         return 0;
1162         }
1163
1164         if (hci_conn_ssp_enabled(conn) &&
1165             !test_bit(HCI_CONN_ENCRYPT, &conn->flags))
1166                 return 0;
1167
1168         return 1;
1169 }
1170
1171 /* Authenticate remote device */
1172 static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
1173 {
1174         BT_DBG("hcon %p", conn);
1175
1176         if (conn->pending_sec_level > sec_level)
1177                 sec_level = conn->pending_sec_level;
1178
1179         if (sec_level > conn->sec_level)
1180                 conn->pending_sec_level = sec_level;
1181         else if (test_bit(HCI_CONN_AUTH, &conn->flags))
1182                 return 1;
1183
1184         /* Make sure we preserve an existing MITM requirement*/
1185         auth_type |= (conn->auth_type & 0x01);
1186
1187         conn->auth_type = auth_type;
1188
1189         if (!test_and_set_bit(HCI_CONN_AUTH_PEND, &conn->flags)) {
1190                 struct hci_cp_auth_requested cp;
1191
1192                 cp.handle = cpu_to_le16(conn->handle);
1193                 hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED,
1194                              sizeof(cp), &cp);
1195
1196                 /* If we're already encrypted set the REAUTH_PEND flag,
1197                  * otherwise set the ENCRYPT_PEND.
1198                  */
1199                 if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
1200                         set_bit(HCI_CONN_REAUTH_PEND, &conn->flags);
1201                 else
1202                         set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
1203         }
1204
1205         return 0;
1206 }
1207
1208 /* Encrypt the the link */
1209 static void hci_conn_encrypt(struct hci_conn *conn)
1210 {
1211         BT_DBG("hcon %p", conn);
1212
1213         if (!test_and_set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags)) {
1214                 struct hci_cp_set_conn_encrypt cp;
1215                 cp.handle  = cpu_to_le16(conn->handle);
1216                 cp.encrypt = 0x01;
1217                 hci_send_cmd(conn->hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp),
1218                              &cp);
1219         }
1220 }
1221
1222 /* Enable security */
1223 int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type,
1224                       bool initiator)
1225 {
1226         BT_DBG("hcon %p", conn);
1227
1228         if (conn->type == LE_LINK)
1229                 return smp_conn_security(conn, sec_level);
1230
1231         /* For sdp we don't need the link key. */
1232         if (sec_level == BT_SECURITY_SDP)
1233                 return 1;
1234
1235         /* For non 2.1 devices and low security level we don't need the link
1236            key. */
1237         if (sec_level == BT_SECURITY_LOW && !hci_conn_ssp_enabled(conn))
1238                 return 1;
1239
1240         /* For other security levels we need the link key. */
1241         if (!test_bit(HCI_CONN_AUTH, &conn->flags))
1242                 goto auth;
1243
1244         /* An authenticated FIPS approved combination key has sufficient
1245          * security for security level 4. */
1246         if (conn->key_type == HCI_LK_AUTH_COMBINATION_P256 &&
1247             sec_level == BT_SECURITY_FIPS)
1248                 goto encrypt;
1249
1250         /* An authenticated combination key has sufficient security for
1251            security level 3. */
1252         if ((conn->key_type == HCI_LK_AUTH_COMBINATION_P192 ||
1253              conn->key_type == HCI_LK_AUTH_COMBINATION_P256) &&
1254             sec_level == BT_SECURITY_HIGH)
1255                 goto encrypt;
1256
1257         /* An unauthenticated combination key has sufficient security for
1258            security level 1 and 2. */
1259         if ((conn->key_type == HCI_LK_UNAUTH_COMBINATION_P192 ||
1260              conn->key_type == HCI_LK_UNAUTH_COMBINATION_P256) &&
1261             (sec_level == BT_SECURITY_MEDIUM || sec_level == BT_SECURITY_LOW))
1262                 goto encrypt;
1263
1264         /* A combination key has always sufficient security for the security
1265            levels 1 or 2. High security level requires the combination key
1266            is generated using maximum PIN code length (16).
1267            For pre 2.1 units. */
1268         if (conn->key_type == HCI_LK_COMBINATION &&
1269             (sec_level == BT_SECURITY_MEDIUM || sec_level == BT_SECURITY_LOW ||
1270              conn->pin_length == 16))
1271                 goto encrypt;
1272
1273 auth:
1274         if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags))
1275                 return 0;
1276
1277         if (initiator)
1278                 set_bit(HCI_CONN_AUTH_INITIATOR, &conn->flags);
1279
1280         if (!hci_conn_auth(conn, sec_level, auth_type))
1281                 return 0;
1282
1283 encrypt:
1284         if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
1285                 return 1;
1286
1287         hci_conn_encrypt(conn);
1288         return 0;
1289 }
1290 EXPORT_SYMBOL(hci_conn_security);
1291
1292 /* Check secure link requirement */
1293 int hci_conn_check_secure(struct hci_conn *conn, __u8 sec_level)
1294 {
1295         BT_DBG("hcon %p", conn);
1296
1297         /* Accept if non-secure or higher security level is required */
1298         if (sec_level != BT_SECURITY_HIGH && sec_level != BT_SECURITY_FIPS)
1299                 return 1;
1300
1301         /* Accept if secure or higher security level is already present */
1302         if (conn->sec_level == BT_SECURITY_HIGH ||
1303             conn->sec_level == BT_SECURITY_FIPS)
1304                 return 1;
1305
1306         /* Reject not secure link */
1307         return 0;
1308 }
1309 EXPORT_SYMBOL(hci_conn_check_secure);
1310
1311 /* Switch role */
1312 int hci_conn_switch_role(struct hci_conn *conn, __u8 role)
1313 {
1314         BT_DBG("hcon %p", conn);
1315
1316         if (role == conn->role)
1317                 return 1;
1318
1319         if (!test_and_set_bit(HCI_CONN_RSWITCH_PEND, &conn->flags)) {
1320                 struct hci_cp_switch_role cp;
1321                 bacpy(&cp.bdaddr, &conn->dst);
1322                 cp.role = role;
1323                 hci_send_cmd(conn->hdev, HCI_OP_SWITCH_ROLE, sizeof(cp), &cp);
1324         }
1325
1326         return 0;
1327 }
1328 EXPORT_SYMBOL(hci_conn_switch_role);
1329
1330 /* Enter active mode */
1331 void hci_conn_enter_active_mode(struct hci_conn *conn, __u8 force_active)
1332 {
1333         struct hci_dev *hdev = conn->hdev;
1334
1335         BT_DBG("hcon %p mode %d", conn, conn->mode);
1336
1337         if (conn->mode != HCI_CM_SNIFF)
1338                 goto timer;
1339
1340         if (!test_bit(HCI_CONN_POWER_SAVE, &conn->flags) && !force_active)
1341                 goto timer;
1342
1343         if (!test_and_set_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->flags)) {
1344                 struct hci_cp_exit_sniff_mode cp;
1345                 cp.handle = cpu_to_le16(conn->handle);
1346                 hci_send_cmd(hdev, HCI_OP_EXIT_SNIFF_MODE, sizeof(cp), &cp);
1347         }
1348
1349 timer:
1350         if (hdev->idle_timeout > 0)
1351                 queue_delayed_work(hdev->workqueue, &conn->idle_work,
1352                                    msecs_to_jiffies(hdev->idle_timeout));
1353 }
1354
1355 /* Drop all connection on the device */
1356 void hci_conn_hash_flush(struct hci_dev *hdev)
1357 {
1358         struct hci_conn_hash *h = &hdev->conn_hash;
1359         struct hci_conn *c, *n;
1360
1361         BT_DBG("hdev %s", hdev->name);
1362
1363         list_for_each_entry_safe(c, n, &h->list, list) {
1364                 c->state = BT_CLOSED;
1365
1366                 hci_disconn_cfm(c, HCI_ERROR_LOCAL_HOST_TERM);
1367                 hci_conn_del(c);
1368         }
1369 }
1370
1371 /* Check pending connect attempts */
1372 void hci_conn_check_pending(struct hci_dev *hdev)
1373 {
1374         struct hci_conn *conn;
1375
1376         BT_DBG("hdev %s", hdev->name);
1377
1378         hci_dev_lock(hdev);
1379
1380         conn = hci_conn_hash_lookup_state(hdev, ACL_LINK, BT_CONNECT2);
1381         if (conn)
1382                 hci_acl_create_connection(conn);
1383
1384         hci_dev_unlock(hdev);
1385 }
1386
1387 static u32 get_link_mode(struct hci_conn *conn)
1388 {
1389         u32 link_mode = 0;
1390
1391         if (conn->role == HCI_ROLE_MASTER)
1392                 link_mode |= HCI_LM_MASTER;
1393
1394         if (test_bit(HCI_CONN_ENCRYPT, &conn->flags))
1395                 link_mode |= HCI_LM_ENCRYPT;
1396
1397         if (test_bit(HCI_CONN_AUTH, &conn->flags))
1398                 link_mode |= HCI_LM_AUTH;
1399
1400         if (test_bit(HCI_CONN_SECURE, &conn->flags))
1401                 link_mode |= HCI_LM_SECURE;
1402
1403         if (test_bit(HCI_CONN_FIPS, &conn->flags))
1404                 link_mode |= HCI_LM_FIPS;
1405
1406         return link_mode;
1407 }
1408
1409 int hci_get_conn_list(void __user *arg)
1410 {
1411         struct hci_conn *c;
1412         struct hci_conn_list_req req, *cl;
1413         struct hci_conn_info *ci;
1414         struct hci_dev *hdev;
1415         int n = 0, size, err;
1416
1417         if (copy_from_user(&req, arg, sizeof(req)))
1418                 return -EFAULT;
1419
1420         if (!req.conn_num || req.conn_num > (PAGE_SIZE * 2) / sizeof(*ci))
1421                 return -EINVAL;
1422
1423         size = sizeof(req) + req.conn_num * sizeof(*ci);
1424
1425         cl = kmalloc(size, GFP_KERNEL);
1426         if (!cl)
1427                 return -ENOMEM;
1428
1429         hdev = hci_dev_get(req.dev_id);
1430         if (!hdev) {
1431                 kfree(cl);
1432                 return -ENODEV;
1433         }
1434
1435         ci = cl->conn_info;
1436
1437         hci_dev_lock(hdev);
1438         list_for_each_entry(c, &hdev->conn_hash.list, list) {
1439                 bacpy(&(ci + n)->bdaddr, &c->dst);
1440                 (ci + n)->handle = c->handle;
1441                 (ci + n)->type  = c->type;
1442                 (ci + n)->out   = c->out;
1443                 (ci + n)->state = c->state;
1444                 (ci + n)->link_mode = get_link_mode(c);
1445                 if (++n >= req.conn_num)
1446                         break;
1447         }
1448         hci_dev_unlock(hdev);
1449
1450         cl->dev_id = hdev->id;
1451         cl->conn_num = n;
1452         size = sizeof(req) + n * sizeof(*ci);
1453
1454         hci_dev_put(hdev);
1455
1456         err = copy_to_user(arg, cl, size);
1457         kfree(cl);
1458
1459         return err ? -EFAULT : 0;
1460 }
1461
1462 int hci_get_conn_info(struct hci_dev *hdev, void __user *arg)
1463 {
1464         struct hci_conn_info_req req;
1465         struct hci_conn_info ci;
1466         struct hci_conn *conn;
1467         char __user *ptr = arg + sizeof(req);
1468
1469         if (copy_from_user(&req, arg, sizeof(req)))
1470                 return -EFAULT;
1471
1472         hci_dev_lock(hdev);
1473         conn = hci_conn_hash_lookup_ba(hdev, req.type, &req.bdaddr);
1474         if (conn) {
1475                 bacpy(&ci.bdaddr, &conn->dst);
1476                 ci.handle = conn->handle;
1477                 ci.type  = conn->type;
1478                 ci.out   = conn->out;
1479                 ci.state = conn->state;
1480                 ci.link_mode = get_link_mode(conn);
1481         }
1482         hci_dev_unlock(hdev);
1483
1484         if (!conn)
1485                 return -ENOENT;
1486
1487         return copy_to_user(ptr, &ci, sizeof(ci)) ? -EFAULT : 0;
1488 }
1489
1490 int hci_get_auth_info(struct hci_dev *hdev, void __user *arg)
1491 {
1492         struct hci_auth_info_req req;
1493         struct hci_conn *conn;
1494
1495         if (copy_from_user(&req, arg, sizeof(req)))
1496                 return -EFAULT;
1497
1498         hci_dev_lock(hdev);
1499         conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &req.bdaddr);
1500         if (conn)
1501                 req.type = conn->auth_type;
1502         hci_dev_unlock(hdev);
1503
1504         if (!conn)
1505                 return -ENOENT;
1506
1507         return copy_to_user(arg, &req, sizeof(req)) ? -EFAULT : 0;
1508 }
1509
1510 struct hci_chan *hci_chan_create(struct hci_conn *conn)
1511 {
1512         struct hci_dev *hdev = conn->hdev;
1513         struct hci_chan *chan;
1514
1515         BT_DBG("%s hcon %p", hdev->name, conn);
1516
1517         if (test_bit(HCI_CONN_DROP, &conn->flags)) {
1518                 BT_DBG("Refusing to create new hci_chan");
1519                 return NULL;
1520         }
1521
1522         chan = kzalloc(sizeof(*chan), GFP_KERNEL);
1523         if (!chan)
1524                 return NULL;
1525
1526         chan->conn = hci_conn_get(conn);
1527         skb_queue_head_init(&chan->data_q);
1528         chan->state = BT_CONNECTED;
1529
1530         list_add_rcu(&chan->list, &conn->chan_list);
1531
1532         return chan;
1533 }
1534
1535 void hci_chan_del(struct hci_chan *chan)
1536 {
1537         struct hci_conn *conn = chan->conn;
1538         struct hci_dev *hdev = conn->hdev;
1539
1540         BT_DBG("%s hcon %p chan %p", hdev->name, conn, chan);
1541
1542         list_del_rcu(&chan->list);
1543
1544         synchronize_rcu();
1545
1546         /* Prevent new hci_chan's to be created for this hci_conn */
1547         set_bit(HCI_CONN_DROP, &conn->flags);
1548
1549         hci_conn_put(conn);
1550
1551         skb_queue_purge(&chan->data_q);
1552         kfree(chan);
1553 }
1554
1555 void hci_chan_list_flush(struct hci_conn *conn)
1556 {
1557         struct hci_chan *chan, *n;
1558
1559         BT_DBG("hcon %p", conn);
1560
1561         list_for_each_entry_safe(chan, n, &conn->chan_list, list)
1562                 hci_chan_del(chan);
1563 }
1564
1565 static struct hci_chan *__hci_chan_lookup_handle(struct hci_conn *hcon,
1566                                                  __u16 handle)
1567 {
1568         struct hci_chan *hchan;
1569
1570         list_for_each_entry(hchan, &hcon->chan_list, list) {
1571                 if (hchan->handle == handle)
1572                         return hchan;
1573         }
1574
1575         return NULL;
1576 }
1577
1578 struct hci_chan *hci_chan_lookup_handle(struct hci_dev *hdev, __u16 handle)
1579 {
1580         struct hci_conn_hash *h = &hdev->conn_hash;
1581         struct hci_conn *hcon;
1582         struct hci_chan *hchan = NULL;
1583
1584         rcu_read_lock();
1585
1586         list_for_each_entry_rcu(hcon, &h->list, list) {
1587                 hchan = __hci_chan_lookup_handle(hcon, handle);
1588                 if (hchan)
1589                         break;
1590         }
1591
1592         rcu_read_unlock();
1593
1594         return hchan;
1595 }