]> asedeno.scripts.mit.edu Git - linux.git/blob - net/mac80211/mlme.c
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
[linux.git] / net / mac80211 / mlme.c
1 /*
2  * BSS client mode implementation
3  * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4  * Copyright 2004, Instant802 Networks, Inc.
5  * Copyright 2005, Devicescape Software, Inc.
6  * Copyright 2006-2007  Jiri Benc <jbenc@suse.cz>
7  * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
8  *
9  * This program is free software; you can redistribute it and/or modify
10  * it under the terms of the GNU General Public License version 2 as
11  * published by the Free Software Foundation.
12  */
13
14 #include <linux/delay.h>
15 #include <linux/if_ether.h>
16 #include <linux/skbuff.h>
17 #include <linux/if_arp.h>
18 #include <linux/etherdevice.h>
19 #include <linux/moduleparam.h>
20 #include <linux/rtnetlink.h>
21 #include <linux/pm_qos.h>
22 #include <linux/crc32.h>
23 #include <linux/slab.h>
24 #include <linux/export.h>
25 #include <net/mac80211.h>
26 #include <asm/unaligned.h>
27
28 #include "ieee80211_i.h"
29 #include "driver-ops.h"
30 #include "rate.h"
31 #include "led.h"
32
33 static int max_nullfunc_tries = 2;
34 module_param(max_nullfunc_tries, int, 0644);
35 MODULE_PARM_DESC(max_nullfunc_tries,
36                  "Maximum nullfunc tx tries before disconnecting (reason 4).");
37
38 static int max_probe_tries = 5;
39 module_param(max_probe_tries, int, 0644);
40 MODULE_PARM_DESC(max_probe_tries,
41                  "Maximum probe tries before disconnecting (reason 4).");
42
43 /*
44  * Beacon loss timeout is calculated as N frames times the
45  * advertised beacon interval.  This may need to be somewhat
46  * higher than what hardware might detect to account for
47  * delays in the host processing frames. But since we also
48  * probe on beacon miss before declaring the connection lost
49  * default to what we want.
50  */
51 #define IEEE80211_BEACON_LOSS_COUNT     7
52
53 /*
54  * Time the connection can be idle before we probe
55  * it to see if we can still talk to the AP.
56  */
57 #define IEEE80211_CONNECTION_IDLE_TIME  (30 * HZ)
58 /*
59  * Time we wait for a probe response after sending
60  * a probe request because of beacon loss or for
61  * checking the connection still works.
62  */
63 static int probe_wait_ms = 500;
64 module_param(probe_wait_ms, int, 0644);
65 MODULE_PARM_DESC(probe_wait_ms,
66                  "Maximum time(ms) to wait for probe response"
67                  " before disconnecting (reason 4).");
68
69 /*
70  * Weight given to the latest Beacon frame when calculating average signal
71  * strength for Beacon frames received in the current BSS. This must be
72  * between 1 and 15.
73  */
74 #define IEEE80211_SIGNAL_AVE_WEIGHT     3
75
76 /*
77  * How many Beacon frames need to have been used in average signal strength
78  * before starting to indicate signal change events.
79  */
80 #define IEEE80211_SIGNAL_AVE_MIN_COUNT  4
81
82 #define TMR_RUNNING_TIMER       0
83 #define TMR_RUNNING_CHANSW      1
84
85 /*
86  * All cfg80211 functions have to be called outside a locked
87  * section so that they can acquire a lock themselves... This
88  * is much simpler than queuing up things in cfg80211, but we
89  * do need some indirection for that here.
90  */
91 enum rx_mgmt_action {
92         /* no action required */
93         RX_MGMT_NONE,
94
95         /* caller must call cfg80211_send_deauth() */
96         RX_MGMT_CFG80211_DEAUTH,
97
98         /* caller must call cfg80211_send_disassoc() */
99         RX_MGMT_CFG80211_DISASSOC,
100 };
101
102 /* utils */
103 static inline void ASSERT_MGD_MTX(struct ieee80211_if_managed *ifmgd)
104 {
105         lockdep_assert_held(&ifmgd->mtx);
106 }
107
108 /*
109  * We can have multiple work items (and connection probing)
110  * scheduling this timer, but we need to take care to only
111  * reschedule it when it should fire _earlier_ than it was
112  * asked for before, or if it's not pending right now. This
113  * function ensures that. Note that it then is required to
114  * run this function for all timeouts after the first one
115  * has happened -- the work that runs from this timer will
116  * do that.
117  */
118 static void run_again(struct ieee80211_if_managed *ifmgd,
119                              unsigned long timeout)
120 {
121         ASSERT_MGD_MTX(ifmgd);
122
123         if (!timer_pending(&ifmgd->timer) ||
124             time_before(timeout, ifmgd->timer.expires))
125                 mod_timer(&ifmgd->timer, timeout);
126 }
127
128 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
129 {
130         if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
131                 return;
132
133         mod_timer(&sdata->u.mgd.bcn_mon_timer,
134                   round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
135 }
136
137 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
138 {
139         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
140
141         if (unlikely(!sdata->u.mgd.associated))
142                 return;
143
144         if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
145                 return;
146
147         mod_timer(&sdata->u.mgd.conn_mon_timer,
148                   round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
149
150         ifmgd->probe_send_count = 0;
151 }
152
153 static int ecw2cw(int ecw)
154 {
155         return (1 << ecw) - 1;
156 }
157
158 /*
159  * ieee80211_enable_ht should be called only after the operating band
160  * has been determined as ht configuration depends on the hw's
161  * HT abilities for a specific band.
162  */
163 static u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata,
164                                struct ieee80211_ht_info *hti,
165                                const u8 *bssid, u16 ap_ht_cap_flags,
166                                bool beacon_htcap_ie)
167 {
168         struct ieee80211_local *local = sdata->local;
169         struct ieee80211_supported_band *sband;
170         struct sta_info *sta;
171         u32 changed = 0;
172         int hti_cfreq;
173         u16 ht_opmode;
174         bool enable_ht = true;
175         enum nl80211_channel_type prev_chantype;
176         enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT;
177
178         sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
179
180         prev_chantype = sdata->vif.bss_conf.channel_type;
181
182         /* HT is not supported */
183         if (!sband->ht_cap.ht_supported)
184                 enable_ht = false;
185
186         if (enable_ht) {
187                 hti_cfreq = ieee80211_channel_to_frequency(hti->control_chan,
188                                                            sband->band);
189                 /* check that channel matches the right operating channel */
190                 if (local->hw.conf.channel->center_freq != hti_cfreq) {
191                         /* Some APs mess this up, evidently.
192                          * Netgear WNDR3700 sometimes reports 4 higher than
193                          * the actual channel, for instance.
194                          */
195                         printk(KERN_DEBUG
196                                "%s: Wrong control channel in association"
197                                " response: configured center-freq: %d"
198                                " hti-cfreq: %d  hti->control_chan: %d"
199                                " band: %d.  Disabling HT.\n",
200                                sdata->name,
201                                local->hw.conf.channel->center_freq,
202                                hti_cfreq, hti->control_chan,
203                                sband->band);
204                         enable_ht = false;
205                 }
206         }
207
208         if (enable_ht) {
209                 channel_type = NL80211_CHAN_HT20;
210
211                 if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) &&
212                     !ieee80111_cfg_override_disables_ht40(sdata) &&
213                     (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) &&
214                     (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) {
215                         switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
216                         case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
217                                 if (!(local->hw.conf.channel->flags &
218                                     IEEE80211_CHAN_NO_HT40PLUS))
219                                         channel_type = NL80211_CHAN_HT40PLUS;
220                                 break;
221                         case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
222                                 if (!(local->hw.conf.channel->flags &
223                                     IEEE80211_CHAN_NO_HT40MINUS))
224                                         channel_type = NL80211_CHAN_HT40MINUS;
225                                 break;
226                         }
227                 }
228         }
229
230         if (local->tmp_channel)
231                 local->tmp_channel_type = channel_type;
232
233         if (!ieee80211_set_channel_type(local, sdata, channel_type)) {
234                 /* can only fail due to HT40+/- mismatch */
235                 channel_type = NL80211_CHAN_HT20;
236                 WARN_ON(!ieee80211_set_channel_type(local, sdata, channel_type));
237         }
238
239         if (beacon_htcap_ie && (prev_chantype != channel_type)) {
240                 /*
241                  * Whenever the AP announces the HT mode change that can be
242                  * 40MHz intolerant or etc., it would be safer to stop tx
243                  * queues before doing hw config to avoid buffer overflow.
244                  */
245                 ieee80211_stop_queues_by_reason(&sdata->local->hw,
246                                 IEEE80211_QUEUE_STOP_REASON_CHTYPE_CHANGE);
247
248                 /* flush out all packets */
249                 synchronize_net();
250
251                 drv_flush(local, false);
252         }
253
254         /* channel_type change automatically detected */
255         ieee80211_hw_config(local, 0);
256
257         if (prev_chantype != channel_type) {
258                 rcu_read_lock();
259                 sta = sta_info_get(sdata, bssid);
260                 if (sta)
261                         rate_control_rate_update(local, sband, sta,
262                                                  IEEE80211_RC_HT_CHANGED,
263                                                  channel_type);
264                 rcu_read_unlock();
265
266                 if (beacon_htcap_ie)
267                         ieee80211_wake_queues_by_reason(&sdata->local->hw,
268                                 IEEE80211_QUEUE_STOP_REASON_CHTYPE_CHANGE);
269         }
270
271         ht_opmode = le16_to_cpu(hti->operation_mode);
272
273         /* if bss configuration changed store the new one */
274         if (sdata->ht_opmode_valid != enable_ht ||
275             sdata->vif.bss_conf.ht_operation_mode != ht_opmode ||
276             prev_chantype != channel_type) {
277                 changed |= BSS_CHANGED_HT;
278                 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
279                 sdata->ht_opmode_valid = enable_ht;
280         }
281
282         return changed;
283 }
284
285 /* frame sending functions */
286
287 static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata,
288                                            const u8 *bssid, u16 stype, u16 reason,
289                                            void *cookie, bool send_frame)
290 {
291         struct ieee80211_local *local = sdata->local;
292         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
293         struct sk_buff *skb;
294         struct ieee80211_mgmt *mgmt;
295
296         skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*mgmt));
297         if (!skb)
298                 return;
299
300         skb_reserve(skb, local->hw.extra_tx_headroom);
301
302         mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
303         memset(mgmt, 0, 24);
304         memcpy(mgmt->da, bssid, ETH_ALEN);
305         memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
306         memcpy(mgmt->bssid, bssid, ETH_ALEN);
307         mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | stype);
308         skb_put(skb, 2);
309         /* u.deauth.reason_code == u.disassoc.reason_code */
310         mgmt->u.deauth.reason_code = cpu_to_le16(reason);
311
312         if (stype == IEEE80211_STYPE_DEAUTH)
313                 if (cookie)
314                         __cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
315                 else
316                         cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
317         else
318                 if (cookie)
319                         __cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
320                 else
321                         cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
322         if (!(ifmgd->flags & IEEE80211_STA_MFP_ENABLED))
323                 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
324
325         if (send_frame)
326                 ieee80211_tx_skb(sdata, skb);
327         else
328                 kfree_skb(skb);
329 }
330
331 void ieee80211_send_pspoll(struct ieee80211_local *local,
332                            struct ieee80211_sub_if_data *sdata)
333 {
334         struct ieee80211_pspoll *pspoll;
335         struct sk_buff *skb;
336
337         skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
338         if (!skb)
339                 return;
340
341         pspoll = (struct ieee80211_pspoll *) skb->data;
342         pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
343
344         IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
345         ieee80211_tx_skb(sdata, skb);
346 }
347
348 void ieee80211_send_nullfunc(struct ieee80211_local *local,
349                              struct ieee80211_sub_if_data *sdata,
350                              int powersave)
351 {
352         struct sk_buff *skb;
353         struct ieee80211_hdr_3addr *nullfunc;
354         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
355
356         skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif);
357         if (!skb)
358                 return;
359
360         nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
361         if (powersave)
362                 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
363
364         IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
365         if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
366                             IEEE80211_STA_CONNECTION_POLL))
367                 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
368
369         ieee80211_tx_skb(sdata, skb);
370 }
371
372 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
373                                           struct ieee80211_sub_if_data *sdata)
374 {
375         struct sk_buff *skb;
376         struct ieee80211_hdr *nullfunc;
377         __le16 fc;
378
379         if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
380                 return;
381
382         skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
383         if (!skb)
384                 return;
385
386         skb_reserve(skb, local->hw.extra_tx_headroom);
387
388         nullfunc = (struct ieee80211_hdr *) skb_put(skb, 30);
389         memset(nullfunc, 0, 30);
390         fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
391                          IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
392         nullfunc->frame_control = fc;
393         memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
394         memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
395         memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
396         memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
397
398         IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
399         ieee80211_tx_skb(sdata, skb);
400 }
401
402 /* spectrum management related things */
403 static void ieee80211_chswitch_work(struct work_struct *work)
404 {
405         struct ieee80211_sub_if_data *sdata =
406                 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
407         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
408
409         if (!ieee80211_sdata_running(sdata))
410                 return;
411
412         mutex_lock(&ifmgd->mtx);
413         if (!ifmgd->associated)
414                 goto out;
415
416         sdata->local->oper_channel = sdata->local->csa_channel;
417         if (!sdata->local->ops->channel_switch) {
418                 /* call "hw_config" only if doing sw channel switch */
419                 ieee80211_hw_config(sdata->local,
420                         IEEE80211_CONF_CHANGE_CHANNEL);
421         } else {
422                 /* update the device channel directly */
423                 sdata->local->hw.conf.channel = sdata->local->oper_channel;
424         }
425
426         /* XXX: shouldn't really modify cfg80211-owned data! */
427         ifmgd->associated->channel = sdata->local->oper_channel;
428
429         ieee80211_wake_queues_by_reason(&sdata->local->hw,
430                                         IEEE80211_QUEUE_STOP_REASON_CSA);
431  out:
432         ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED;
433         mutex_unlock(&ifmgd->mtx);
434 }
435
436 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
437 {
438         struct ieee80211_sub_if_data *sdata;
439         struct ieee80211_if_managed *ifmgd;
440
441         sdata = vif_to_sdata(vif);
442         ifmgd = &sdata->u.mgd;
443
444         trace_api_chswitch_done(sdata, success);
445         if (!success) {
446                 /*
447                  * If the channel switch was not successful, stay
448                  * around on the old channel. We currently lack
449                  * good handling of this situation, possibly we
450                  * should just drop the association.
451                  */
452                 sdata->local->csa_channel = sdata->local->oper_channel;
453         }
454
455         ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
456 }
457 EXPORT_SYMBOL(ieee80211_chswitch_done);
458
459 static void ieee80211_chswitch_timer(unsigned long data)
460 {
461         struct ieee80211_sub_if_data *sdata =
462                 (struct ieee80211_sub_if_data *) data;
463         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
464
465         if (sdata->local->quiescing) {
466                 set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
467                 return;
468         }
469
470         ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
471 }
472
473 void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
474                                       struct ieee80211_channel_sw_ie *sw_elem,
475                                       struct ieee80211_bss *bss,
476                                       u64 timestamp)
477 {
478         struct cfg80211_bss *cbss =
479                 container_of((void *)bss, struct cfg80211_bss, priv);
480         struct ieee80211_channel *new_ch;
481         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
482         int new_freq = ieee80211_channel_to_frequency(sw_elem->new_ch_num,
483                                                       cbss->channel->band);
484
485         ASSERT_MGD_MTX(ifmgd);
486
487         if (!ifmgd->associated)
488                 return;
489
490         if (sdata->local->scanning)
491                 return;
492
493         /* Disregard subsequent beacons if we are already running a timer
494            processing a CSA */
495
496         if (ifmgd->flags & IEEE80211_STA_CSA_RECEIVED)
497                 return;
498
499         new_ch = ieee80211_get_channel(sdata->local->hw.wiphy, new_freq);
500         if (!new_ch || new_ch->flags & IEEE80211_CHAN_DISABLED)
501                 return;
502
503         sdata->local->csa_channel = new_ch;
504
505         if (sdata->local->ops->channel_switch) {
506                 /* use driver's channel switch callback */
507                 struct ieee80211_channel_switch ch_switch;
508                 memset(&ch_switch, 0, sizeof(ch_switch));
509                 ch_switch.timestamp = timestamp;
510                 if (sw_elem->mode) {
511                         ch_switch.block_tx = true;
512                         ieee80211_stop_queues_by_reason(&sdata->local->hw,
513                                         IEEE80211_QUEUE_STOP_REASON_CSA);
514                 }
515                 ch_switch.channel = new_ch;
516                 ch_switch.count = sw_elem->count;
517                 ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED;
518                 drv_channel_switch(sdata->local, &ch_switch);
519                 return;
520         }
521
522         /* channel switch handled in software */
523         if (sw_elem->count <= 1) {
524                 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
525         } else {
526                 if (sw_elem->mode)
527                         ieee80211_stop_queues_by_reason(&sdata->local->hw,
528                                         IEEE80211_QUEUE_STOP_REASON_CSA);
529                 ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED;
530                 mod_timer(&ifmgd->chswitch_timer,
531                           jiffies +
532                           msecs_to_jiffies(sw_elem->count *
533                                            cbss->beacon_interval));
534         }
535 }
536
537 static void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
538                                         u16 capab_info, u8 *pwr_constr_elem,
539                                         u8 pwr_constr_elem_len)
540 {
541         struct ieee80211_conf *conf = &sdata->local->hw.conf;
542
543         if (!(capab_info & WLAN_CAPABILITY_SPECTRUM_MGMT))
544                 return;
545
546         /* Power constraint IE length should be 1 octet */
547         if (pwr_constr_elem_len != 1)
548                 return;
549
550         if ((*pwr_constr_elem <= conf->channel->max_reg_power) &&
551             (*pwr_constr_elem != sdata->local->power_constr_level)) {
552                 sdata->local->power_constr_level = *pwr_constr_elem;
553                 ieee80211_hw_config(sdata->local, 0);
554         }
555 }
556
557 void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif)
558 {
559         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
560         struct ieee80211_local *local = sdata->local;
561         struct ieee80211_conf *conf = &local->hw.conf;
562
563         WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION ||
564                 !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) ||
565                 (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS));
566
567         local->disable_dynamic_ps = false;
568         conf->dynamic_ps_timeout = local->dynamic_ps_user_timeout;
569 }
570 EXPORT_SYMBOL(ieee80211_enable_dyn_ps);
571
572 void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif)
573 {
574         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
575         struct ieee80211_local *local = sdata->local;
576         struct ieee80211_conf *conf = &local->hw.conf;
577
578         WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION ||
579                 !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) ||
580                 (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS));
581
582         local->disable_dynamic_ps = true;
583         conf->dynamic_ps_timeout = 0;
584         del_timer_sync(&local->dynamic_ps_timer);
585         ieee80211_queue_work(&local->hw,
586                              &local->dynamic_ps_enable_work);
587 }
588 EXPORT_SYMBOL(ieee80211_disable_dyn_ps);
589
590 /* powersave */
591 static void ieee80211_enable_ps(struct ieee80211_local *local,
592                                 struct ieee80211_sub_if_data *sdata)
593 {
594         struct ieee80211_conf *conf = &local->hw.conf;
595
596         /*
597          * If we are scanning right now then the parameters will
598          * take effect when scan finishes.
599          */
600         if (local->scanning)
601                 return;
602
603         if (conf->dynamic_ps_timeout > 0 &&
604             !(local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)) {
605                 mod_timer(&local->dynamic_ps_timer, jiffies +
606                           msecs_to_jiffies(conf->dynamic_ps_timeout));
607         } else {
608                 if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
609                         ieee80211_send_nullfunc(local, sdata, 1);
610
611                 if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
612                     (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS))
613                         return;
614
615                 conf->flags |= IEEE80211_CONF_PS;
616                 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
617         }
618 }
619
620 static void ieee80211_change_ps(struct ieee80211_local *local)
621 {
622         struct ieee80211_conf *conf = &local->hw.conf;
623
624         if (local->ps_sdata) {
625                 ieee80211_enable_ps(local, local->ps_sdata);
626         } else if (conf->flags & IEEE80211_CONF_PS) {
627                 conf->flags &= ~IEEE80211_CONF_PS;
628                 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
629                 del_timer_sync(&local->dynamic_ps_timer);
630                 cancel_work_sync(&local->dynamic_ps_enable_work);
631         }
632 }
633
634 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
635 {
636         struct ieee80211_if_managed *mgd = &sdata->u.mgd;
637         struct sta_info *sta = NULL;
638         bool authorized = false;
639
640         if (!mgd->powersave)
641                 return false;
642
643         if (mgd->broken_ap)
644                 return false;
645
646         if (!mgd->associated)
647                 return false;
648
649         if (!mgd->associated->beacon_ies)
650                 return false;
651
652         if (mgd->flags & (IEEE80211_STA_BEACON_POLL |
653                           IEEE80211_STA_CONNECTION_POLL))
654                 return false;
655
656         rcu_read_lock();
657         sta = sta_info_get(sdata, mgd->bssid);
658         if (sta)
659                 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
660         rcu_read_unlock();
661
662         return authorized;
663 }
664
665 /* need to hold RTNL or interface lock */
666 void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency)
667 {
668         struct ieee80211_sub_if_data *sdata, *found = NULL;
669         int count = 0;
670         int timeout;
671
672         if (!(local->hw.flags & IEEE80211_HW_SUPPORTS_PS)) {
673                 local->ps_sdata = NULL;
674                 return;
675         }
676
677         if (!list_empty(&local->work_list)) {
678                 local->ps_sdata = NULL;
679                 goto change;
680         }
681
682         list_for_each_entry(sdata, &local->interfaces, list) {
683                 if (!ieee80211_sdata_running(sdata))
684                         continue;
685                 if (sdata->vif.type == NL80211_IFTYPE_AP) {
686                         /* If an AP vif is found, then disable PS
687                          * by setting the count to zero thereby setting
688                          * ps_sdata to NULL.
689                          */
690                         count = 0;
691                         break;
692                 }
693                 if (sdata->vif.type != NL80211_IFTYPE_STATION)
694                         continue;
695                 found = sdata;
696                 count++;
697         }
698
699         if (count == 1 && ieee80211_powersave_allowed(found)) {
700                 struct ieee80211_conf *conf = &local->hw.conf;
701                 s32 beaconint_us;
702
703                 if (latency < 0)
704                         latency = pm_qos_request(PM_QOS_NETWORK_LATENCY);
705
706                 beaconint_us = ieee80211_tu_to_usec(
707                                         found->vif.bss_conf.beacon_int);
708
709                 timeout = local->dynamic_ps_forced_timeout;
710                 if (timeout < 0) {
711                         /*
712                          * Go to full PSM if the user configures a very low
713                          * latency requirement.
714                          * The 2000 second value is there for compatibility
715                          * until the PM_QOS_NETWORK_LATENCY is configured
716                          * with real values.
717                          */
718                         if (latency > (1900 * USEC_PER_MSEC) &&
719                             latency != (2000 * USEC_PER_SEC))
720                                 timeout = 0;
721                         else
722                                 timeout = 100;
723                 }
724                 local->dynamic_ps_user_timeout = timeout;
725                 if (!local->disable_dynamic_ps)
726                         conf->dynamic_ps_timeout =
727                                 local->dynamic_ps_user_timeout;
728
729                 if (beaconint_us > latency) {
730                         local->ps_sdata = NULL;
731                 } else {
732                         struct ieee80211_bss *bss;
733                         int maxslp = 1;
734                         u8 dtimper;
735
736                         bss = (void *)found->u.mgd.associated->priv;
737                         dtimper = bss->dtim_period;
738
739                         /* If the TIM IE is invalid, pretend the value is 1 */
740                         if (!dtimper)
741                                 dtimper = 1;
742                         else if (dtimper > 1)
743                                 maxslp = min_t(int, dtimper,
744                                                     latency / beaconint_us);
745
746                         local->hw.conf.max_sleep_period = maxslp;
747                         local->hw.conf.ps_dtim_period = dtimper;
748                         local->ps_sdata = found;
749                 }
750         } else {
751                 local->ps_sdata = NULL;
752         }
753
754  change:
755         ieee80211_change_ps(local);
756 }
757
758 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
759 {
760         struct ieee80211_local *local =
761                 container_of(work, struct ieee80211_local,
762                              dynamic_ps_disable_work);
763
764         if (local->hw.conf.flags & IEEE80211_CONF_PS) {
765                 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
766                 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
767         }
768
769         ieee80211_wake_queues_by_reason(&local->hw,
770                                         IEEE80211_QUEUE_STOP_REASON_PS);
771 }
772
773 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
774 {
775         struct ieee80211_local *local =
776                 container_of(work, struct ieee80211_local,
777                              dynamic_ps_enable_work);
778         struct ieee80211_sub_if_data *sdata = local->ps_sdata;
779         struct ieee80211_if_managed *ifmgd;
780         unsigned long flags;
781         int q;
782
783         /* can only happen when PS was just disabled anyway */
784         if (!sdata)
785                 return;
786
787         ifmgd = &sdata->u.mgd;
788
789         if (local->hw.conf.flags & IEEE80211_CONF_PS)
790                 return;
791
792         if (!local->disable_dynamic_ps &&
793             local->hw.conf.dynamic_ps_timeout > 0) {
794                 /* don't enter PS if TX frames are pending */
795                 if (drv_tx_frames_pending(local)) {
796                         mod_timer(&local->dynamic_ps_timer, jiffies +
797                                   msecs_to_jiffies(
798                                   local->hw.conf.dynamic_ps_timeout));
799                         return;
800                 }
801
802                 /*
803                  * transmission can be stopped by others which leads to
804                  * dynamic_ps_timer expiry. Postpone the ps timer if it
805                  * is not the actual idle state.
806                  */
807                 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
808                 for (q = 0; q < local->hw.queues; q++) {
809                         if (local->queue_stop_reasons[q]) {
810                                 spin_unlock_irqrestore(&local->queue_stop_reason_lock,
811                                                        flags);
812                                 mod_timer(&local->dynamic_ps_timer, jiffies +
813                                           msecs_to_jiffies(
814                                           local->hw.conf.dynamic_ps_timeout));
815                                 return;
816                         }
817                 }
818                 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
819         }
820
821         if ((local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) &&
822             !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
823                 netif_tx_stop_all_queues(sdata->dev);
824
825                 if (drv_tx_frames_pending(local))
826                         mod_timer(&local->dynamic_ps_timer, jiffies +
827                                   msecs_to_jiffies(
828                                   local->hw.conf.dynamic_ps_timeout));
829                 else {
830                         ieee80211_send_nullfunc(local, sdata, 1);
831                         /* Flush to get the tx status of nullfunc frame */
832                         drv_flush(local, false);
833                 }
834         }
835
836         if (!((local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) &&
837               (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)) ||
838             (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
839                 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
840                 local->hw.conf.flags |= IEEE80211_CONF_PS;
841                 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
842         }
843
844         if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
845                 netif_tx_wake_all_queues(sdata->dev);
846 }
847
848 void ieee80211_dynamic_ps_timer(unsigned long data)
849 {
850         struct ieee80211_local *local = (void *) data;
851
852         if (local->quiescing || local->suspended)
853                 return;
854
855         ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
856 }
857
858 /* MLME */
859 static void ieee80211_sta_wmm_params(struct ieee80211_local *local,
860                                      struct ieee80211_sub_if_data *sdata,
861                                      u8 *wmm_param, size_t wmm_param_len)
862 {
863         struct ieee80211_tx_queue_params params;
864         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
865         size_t left;
866         int count;
867         u8 *pos, uapsd_queues = 0;
868
869         if (!local->ops->conf_tx)
870                 return;
871
872         if (local->hw.queues < 4)
873                 return;
874
875         if (!wmm_param)
876                 return;
877
878         if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
879                 return;
880
881         if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
882                 uapsd_queues = local->uapsd_queues;
883
884         count = wmm_param[6] & 0x0f;
885         if (count == ifmgd->wmm_last_param_set)
886                 return;
887         ifmgd->wmm_last_param_set = count;
888
889         pos = wmm_param + 8;
890         left = wmm_param_len - 8;
891
892         memset(&params, 0, sizeof(params));
893
894         local->wmm_acm = 0;
895         for (; left >= 4; left -= 4, pos += 4) {
896                 int aci = (pos[0] >> 5) & 0x03;
897                 int acm = (pos[0] >> 4) & 0x01;
898                 bool uapsd = false;
899                 int queue;
900
901                 switch (aci) {
902                 case 1: /* AC_BK */
903                         queue = 3;
904                         if (acm)
905                                 local->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
906                         if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
907                                 uapsd = true;
908                         break;
909                 case 2: /* AC_VI */
910                         queue = 1;
911                         if (acm)
912                                 local->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
913                         if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
914                                 uapsd = true;
915                         break;
916                 case 3: /* AC_VO */
917                         queue = 0;
918                         if (acm)
919                                 local->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
920                         if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
921                                 uapsd = true;
922                         break;
923                 case 0: /* AC_BE */
924                 default:
925                         queue = 2;
926                         if (acm)
927                                 local->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
928                         if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
929                                 uapsd = true;
930                         break;
931                 }
932
933                 params.aifs = pos[0] & 0x0f;
934                 params.cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
935                 params.cw_min = ecw2cw(pos[1] & 0x0f);
936                 params.txop = get_unaligned_le16(pos + 2);
937                 params.uapsd = uapsd;
938
939 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
940                 wiphy_debug(local->hw.wiphy,
941                             "WMM queue=%d aci=%d acm=%d aifs=%d "
942                             "cWmin=%d cWmax=%d txop=%d uapsd=%d\n",
943                             queue, aci, acm,
944                             params.aifs, params.cw_min, params.cw_max,
945                             params.txop, params.uapsd);
946 #endif
947                 sdata->tx_conf[queue] = params;
948                 if (drv_conf_tx(local, sdata, queue, &params))
949                         wiphy_debug(local->hw.wiphy,
950                                     "failed to set TX queue parameters for queue %d\n",
951                                     queue);
952         }
953
954         /* enable WMM or activate new settings */
955         sdata->vif.bss_conf.qos = true;
956         ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS);
957 }
958
959 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
960                                            u16 capab, bool erp_valid, u8 erp)
961 {
962         struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
963         u32 changed = 0;
964         bool use_protection;
965         bool use_short_preamble;
966         bool use_short_slot;
967
968         if (erp_valid) {
969                 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
970                 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
971         } else {
972                 use_protection = false;
973                 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
974         }
975
976         use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
977         if (sdata->local->hw.conf.channel->band == IEEE80211_BAND_5GHZ)
978                 use_short_slot = true;
979
980         if (use_protection != bss_conf->use_cts_prot) {
981                 bss_conf->use_cts_prot = use_protection;
982                 changed |= BSS_CHANGED_ERP_CTS_PROT;
983         }
984
985         if (use_short_preamble != bss_conf->use_short_preamble) {
986                 bss_conf->use_short_preamble = use_short_preamble;
987                 changed |= BSS_CHANGED_ERP_PREAMBLE;
988         }
989
990         if (use_short_slot != bss_conf->use_short_slot) {
991                 bss_conf->use_short_slot = use_short_slot;
992                 changed |= BSS_CHANGED_ERP_SLOT;
993         }
994
995         return changed;
996 }
997
998 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
999                                      struct cfg80211_bss *cbss,
1000                                      u32 bss_info_changed)
1001 {
1002         struct ieee80211_bss *bss = (void *)cbss->priv;
1003         struct ieee80211_local *local = sdata->local;
1004         struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1005
1006         bss_info_changed |= BSS_CHANGED_ASSOC;
1007         /* set timing information */
1008         bss_conf->beacon_int = cbss->beacon_interval;
1009         bss_conf->timestamp = cbss->tsf;
1010
1011         bss_info_changed |= BSS_CHANGED_BEACON_INT;
1012         bss_info_changed |= ieee80211_handle_bss_capability(sdata,
1013                 cbss->capability, bss->has_erp_value, bss->erp_value);
1014
1015         sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
1016                 IEEE80211_BEACON_LOSS_COUNT * bss_conf->beacon_int));
1017
1018         sdata->u.mgd.associated = cbss;
1019         memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
1020
1021         sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
1022
1023         /* just to be sure */
1024         sdata->u.mgd.flags &= ~(IEEE80211_STA_CONNECTION_POLL |
1025                                 IEEE80211_STA_BEACON_POLL);
1026
1027         ieee80211_led_assoc(local, 1);
1028
1029         if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD)
1030                 bss_conf->dtim_period = bss->dtim_period;
1031         else
1032                 bss_conf->dtim_period = 0;
1033
1034         bss_conf->assoc = 1;
1035         /*
1036          * For now just always ask the driver to update the basic rateset
1037          * when we have associated, we aren't checking whether it actually
1038          * changed or not.
1039          */
1040         bss_info_changed |= BSS_CHANGED_BASIC_RATES;
1041
1042         /* And the BSSID changed - we're associated now */
1043         bss_info_changed |= BSS_CHANGED_BSSID;
1044
1045         /* Tell the driver to monitor connection quality (if supported) */
1046         if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
1047             bss_conf->cqm_rssi_thold)
1048                 bss_info_changed |= BSS_CHANGED_CQM;
1049
1050         /* Enable ARP filtering */
1051         if (bss_conf->arp_filter_enabled != sdata->arp_filter_state) {
1052                 bss_conf->arp_filter_enabled = sdata->arp_filter_state;
1053                 bss_info_changed |= BSS_CHANGED_ARP_FILTER;
1054         }
1055
1056         ieee80211_bss_info_change_notify(sdata, bss_info_changed);
1057
1058         mutex_lock(&local->iflist_mtx);
1059         ieee80211_recalc_ps(local, -1);
1060         ieee80211_recalc_smps(local);
1061         mutex_unlock(&local->iflist_mtx);
1062
1063         netif_tx_start_all_queues(sdata->dev);
1064         netif_carrier_on(sdata->dev);
1065 }
1066
1067 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
1068                                    bool remove_sta, bool tx)
1069 {
1070         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1071         struct ieee80211_local *local = sdata->local;
1072         struct sta_info *sta;
1073         u32 changed = 0, config_changed = 0;
1074         u8 bssid[ETH_ALEN];
1075
1076         ASSERT_MGD_MTX(ifmgd);
1077
1078         if (WARN_ON(!ifmgd->associated))
1079                 return;
1080
1081         memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
1082
1083         ifmgd->associated = NULL;
1084         memset(ifmgd->bssid, 0, ETH_ALEN);
1085
1086         /*
1087          * we need to commit the associated = NULL change because the
1088          * scan code uses that to determine whether this iface should
1089          * go to/wake up from powersave or not -- and could otherwise
1090          * wake the queues erroneously.
1091          */
1092         smp_mb();
1093
1094         /*
1095          * Thus, we can only afterwards stop the queues -- to account
1096          * for the case where another CPU is finishing a scan at this
1097          * time -- we don't want the scan code to enable queues.
1098          */
1099
1100         netif_tx_stop_all_queues(sdata->dev);
1101         netif_carrier_off(sdata->dev);
1102
1103         mutex_lock(&local->sta_mtx);
1104         sta = sta_info_get(sdata, bssid);
1105         if (sta) {
1106                 set_sta_flag(sta, WLAN_STA_BLOCK_BA);
1107                 ieee80211_sta_tear_down_BA_sessions(sta, tx);
1108         }
1109         mutex_unlock(&local->sta_mtx);
1110
1111         changed |= ieee80211_reset_erp_info(sdata);
1112
1113         ieee80211_led_assoc(local, 0);
1114         changed |= BSS_CHANGED_ASSOC;
1115         sdata->vif.bss_conf.assoc = false;
1116
1117         ieee80211_set_wmm_default(sdata);
1118
1119         /* channel(_type) changes are handled by ieee80211_hw_config */
1120         WARN_ON(!ieee80211_set_channel_type(local, sdata, NL80211_CHAN_NO_HT));
1121
1122         /* on the next assoc, re-program HT parameters */
1123         sdata->ht_opmode_valid = false;
1124         memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
1125         memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
1126
1127         local->power_constr_level = 0;
1128
1129         del_timer_sync(&local->dynamic_ps_timer);
1130         cancel_work_sync(&local->dynamic_ps_enable_work);
1131
1132         if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1133                 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1134                 config_changed |= IEEE80211_CONF_CHANGE_PS;
1135         }
1136         local->ps_sdata = NULL;
1137
1138         ieee80211_hw_config(local, config_changed);
1139
1140         /* Disable ARP filtering */
1141         if (sdata->vif.bss_conf.arp_filter_enabled) {
1142                 sdata->vif.bss_conf.arp_filter_enabled = false;
1143                 changed |= BSS_CHANGED_ARP_FILTER;
1144         }
1145
1146         /* The BSSID (not really interesting) and HT changed */
1147         changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
1148         ieee80211_bss_info_change_notify(sdata, changed);
1149
1150         /* remove AP and TDLS peers */
1151         if (remove_sta)
1152                 sta_info_flush(local, sdata);
1153
1154         del_timer_sync(&sdata->u.mgd.conn_mon_timer);
1155         del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
1156         del_timer_sync(&sdata->u.mgd.timer);
1157         del_timer_sync(&sdata->u.mgd.chswitch_timer);
1158 }
1159
1160 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
1161                              struct ieee80211_hdr *hdr)
1162 {
1163         /*
1164          * We can postpone the mgd.timer whenever receiving unicast frames
1165          * from AP because we know that the connection is working both ways
1166          * at that time. But multicast frames (and hence also beacons) must
1167          * be ignored here, because we need to trigger the timer during
1168          * data idle periods for sending the periodic probe request to the
1169          * AP we're connected to.
1170          */
1171         if (is_multicast_ether_addr(hdr->addr1))
1172                 return;
1173
1174         ieee80211_sta_reset_conn_monitor(sdata);
1175 }
1176
1177 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
1178 {
1179         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1180
1181         if (!(ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
1182                               IEEE80211_STA_CONNECTION_POLL)))
1183             return;
1184
1185         ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
1186                           IEEE80211_STA_BEACON_POLL);
1187         mutex_lock(&sdata->local->iflist_mtx);
1188         ieee80211_recalc_ps(sdata->local, -1);
1189         mutex_unlock(&sdata->local->iflist_mtx);
1190
1191         if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
1192                 return;
1193
1194         /*
1195          * We've received a probe response, but are not sure whether
1196          * we have or will be receiving any beacons or data, so let's
1197          * schedule the timers again, just in case.
1198          */
1199         ieee80211_sta_reset_beacon_monitor(sdata);
1200
1201         mod_timer(&ifmgd->conn_mon_timer,
1202                   round_jiffies_up(jiffies +
1203                                    IEEE80211_CONNECTION_IDLE_TIME));
1204 }
1205
1206 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
1207                              struct ieee80211_hdr *hdr, bool ack)
1208 {
1209         if (!ieee80211_is_data(hdr->frame_control))
1210             return;
1211
1212         if (ack)
1213                 ieee80211_sta_reset_conn_monitor(sdata);
1214
1215         if (ieee80211_is_nullfunc(hdr->frame_control) &&
1216             sdata->u.mgd.probe_send_count > 0) {
1217                 if (ack)
1218                         sdata->u.mgd.probe_send_count = 0;
1219                 else
1220                         sdata->u.mgd.nullfunc_failed = true;
1221                 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
1222         }
1223 }
1224
1225 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
1226 {
1227         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1228         const u8 *ssid;
1229         u8 *dst = ifmgd->associated->bssid;
1230         u8 unicast_limit = max(1, max_probe_tries - 3);
1231
1232         /*
1233          * Try sending broadcast probe requests for the last three
1234          * probe requests after the first ones failed since some
1235          * buggy APs only support broadcast probe requests.
1236          */
1237         if (ifmgd->probe_send_count >= unicast_limit)
1238                 dst = NULL;
1239
1240         /*
1241          * When the hardware reports an accurate Tx ACK status, it's
1242          * better to send a nullfunc frame instead of a probe request,
1243          * as it will kick us off the AP quickly if we aren't associated
1244          * anymore. The timeout will be reset if the frame is ACKed by
1245          * the AP.
1246          */
1247         if (sdata->local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
1248                 ifmgd->nullfunc_failed = false;
1249                 ieee80211_send_nullfunc(sdata->local, sdata, 0);
1250         } else {
1251                 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
1252                 ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid[1], NULL, 0,
1253                                          (u32) -1, true, false);
1254         }
1255
1256         ifmgd->probe_send_count++;
1257         ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
1258         run_again(ifmgd, ifmgd->probe_timeout);
1259 }
1260
1261 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
1262                                    bool beacon)
1263 {
1264         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1265         bool already = false;
1266
1267         if (!ieee80211_sdata_running(sdata))
1268                 return;
1269
1270         if (sdata->local->scanning)
1271                 return;
1272
1273         if (sdata->local->tmp_channel)
1274                 return;
1275
1276         mutex_lock(&ifmgd->mtx);
1277
1278         if (!ifmgd->associated)
1279                 goto out;
1280
1281 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1282         if (beacon && net_ratelimit())
1283                 printk(KERN_DEBUG "%s: detected beacon loss from AP "
1284                        "- sending probe request\n", sdata->name);
1285 #endif
1286
1287         /*
1288          * The driver/our work has already reported this event or the
1289          * connection monitoring has kicked in and we have already sent
1290          * a probe request. Or maybe the AP died and the driver keeps
1291          * reporting until we disassociate...
1292          *
1293          * In either case we have to ignore the current call to this
1294          * function (except for setting the correct probe reason bit)
1295          * because otherwise we would reset the timer every time and
1296          * never check whether we received a probe response!
1297          */
1298         if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
1299                             IEEE80211_STA_CONNECTION_POLL))
1300                 already = true;
1301
1302         if (beacon)
1303                 ifmgd->flags |= IEEE80211_STA_BEACON_POLL;
1304         else
1305                 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
1306
1307         if (already)
1308                 goto out;
1309
1310         mutex_lock(&sdata->local->iflist_mtx);
1311         ieee80211_recalc_ps(sdata->local, -1);
1312         mutex_unlock(&sdata->local->iflist_mtx);
1313
1314         ifmgd->probe_send_count = 0;
1315         ieee80211_mgd_probe_ap_send(sdata);
1316  out:
1317         mutex_unlock(&ifmgd->mtx);
1318 }
1319
1320 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
1321                                           struct ieee80211_vif *vif)
1322 {
1323         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1324         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1325         struct sk_buff *skb;
1326         const u8 *ssid;
1327
1328         if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
1329                 return NULL;
1330
1331         ASSERT_MGD_MTX(ifmgd);
1332
1333         if (!ifmgd->associated)
1334                 return NULL;
1335
1336         ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
1337         skb = ieee80211_build_probe_req(sdata, ifmgd->associated->bssid,
1338                                         (u32) -1, ssid + 2, ssid[1],
1339                                         NULL, 0, true);
1340
1341         return skb;
1342 }
1343 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
1344
1345 static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata)
1346 {
1347         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1348         struct ieee80211_local *local = sdata->local;
1349         u8 bssid[ETH_ALEN];
1350
1351         mutex_lock(&ifmgd->mtx);
1352         if (!ifmgd->associated) {
1353                 mutex_unlock(&ifmgd->mtx);
1354                 return;
1355         }
1356
1357         memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
1358
1359         printk(KERN_DEBUG "%s: Connection to AP %pM lost.\n",
1360                sdata->name, bssid);
1361
1362         ieee80211_set_disassoc(sdata, true, true);
1363         mutex_unlock(&ifmgd->mtx);
1364
1365         /*
1366          * must be outside lock due to cfg80211,
1367          * but that's not a problem.
1368          */
1369         ieee80211_send_deauth_disassoc(sdata, bssid,
1370                                        IEEE80211_STYPE_DEAUTH,
1371                                        WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
1372                                        NULL, true);
1373
1374         mutex_lock(&local->mtx);
1375         ieee80211_recalc_idle(local);
1376         mutex_unlock(&local->mtx);
1377 }
1378
1379 void ieee80211_beacon_connection_loss_work(struct work_struct *work)
1380 {
1381         struct ieee80211_sub_if_data *sdata =
1382                 container_of(work, struct ieee80211_sub_if_data,
1383                              u.mgd.beacon_connection_loss_work);
1384         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1385         struct sta_info *sta;
1386
1387         if (ifmgd->associated) {
1388                 rcu_read_lock();
1389                 sta = sta_info_get(sdata, ifmgd->bssid);
1390                 if (sta)
1391                         sta->beacon_loss_count++;
1392                 rcu_read_unlock();
1393         }
1394
1395         if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR)
1396                 __ieee80211_connection_loss(sdata);
1397         else
1398                 ieee80211_mgd_probe_ap(sdata, true);
1399 }
1400
1401 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
1402 {
1403         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1404         struct ieee80211_hw *hw = &sdata->local->hw;
1405
1406         trace_api_beacon_loss(sdata);
1407
1408         WARN_ON(hw->flags & IEEE80211_HW_CONNECTION_MONITOR);
1409         ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
1410 }
1411 EXPORT_SYMBOL(ieee80211_beacon_loss);
1412
1413 void ieee80211_connection_loss(struct ieee80211_vif *vif)
1414 {
1415         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1416         struct ieee80211_hw *hw = &sdata->local->hw;
1417
1418         trace_api_connection_loss(sdata);
1419
1420         WARN_ON(!(hw->flags & IEEE80211_HW_CONNECTION_MONITOR));
1421         ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
1422 }
1423 EXPORT_SYMBOL(ieee80211_connection_loss);
1424
1425
1426 static enum rx_mgmt_action __must_check
1427 ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
1428                          struct ieee80211_mgmt *mgmt, size_t len)
1429 {
1430         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1431         const u8 *bssid = NULL;
1432         u16 reason_code;
1433
1434         if (len < 24 + 2)
1435                 return RX_MGMT_NONE;
1436
1437         ASSERT_MGD_MTX(ifmgd);
1438
1439         bssid = ifmgd->associated->bssid;
1440
1441         reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
1442
1443         printk(KERN_DEBUG "%s: deauthenticated from %pM (Reason: %u)\n",
1444                         sdata->name, bssid, reason_code);
1445
1446         ieee80211_set_disassoc(sdata, true, false);
1447         mutex_lock(&sdata->local->mtx);
1448         ieee80211_recalc_idle(sdata->local);
1449         mutex_unlock(&sdata->local->mtx);
1450
1451         return RX_MGMT_CFG80211_DEAUTH;
1452 }
1453
1454
1455 static enum rx_mgmt_action __must_check
1456 ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
1457                            struct ieee80211_mgmt *mgmt, size_t len)
1458 {
1459         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1460         u16 reason_code;
1461
1462         if (len < 24 + 2)
1463                 return RX_MGMT_NONE;
1464
1465         ASSERT_MGD_MTX(ifmgd);
1466
1467         if (WARN_ON(!ifmgd->associated))
1468                 return RX_MGMT_NONE;
1469
1470         if (WARN_ON(memcmp(ifmgd->associated->bssid, mgmt->sa, ETH_ALEN)))
1471                 return RX_MGMT_NONE;
1472
1473         reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
1474
1475         printk(KERN_DEBUG "%s: disassociated from %pM (Reason: %u)\n",
1476                         sdata->name, mgmt->sa, reason_code);
1477
1478         ieee80211_set_disassoc(sdata, true, false);
1479         mutex_lock(&sdata->local->mtx);
1480         ieee80211_recalc_idle(sdata->local);
1481         mutex_unlock(&sdata->local->mtx);
1482         return RX_MGMT_CFG80211_DISASSOC;
1483 }
1484
1485 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
1486                                 u8 *supp_rates, unsigned int supp_rates_len,
1487                                 u32 *rates, u32 *basic_rates,
1488                                 bool *have_higher_than_11mbit,
1489                                 int *min_rate, int *min_rate_index)
1490 {
1491         int i, j;
1492
1493         for (i = 0; i < supp_rates_len; i++) {
1494                 int rate = (supp_rates[i] & 0x7f) * 5;
1495                 bool is_basic = !!(supp_rates[i] & 0x80);
1496
1497                 if (rate > 110)
1498                         *have_higher_than_11mbit = true;
1499
1500                 /*
1501                  * BSS_MEMBERSHIP_SELECTOR_HT_PHY is defined in 802.11n-2009
1502                  * 7.3.2.2 as a magic value instead of a rate. Hence, skip it.
1503                  *
1504                  * Note: Even through the membership selector and the basic
1505                  *       rate flag share the same bit, they are not exactly
1506                  *       the same.
1507                  */
1508                 if (!!(supp_rates[i] & 0x80) &&
1509                     (supp_rates[i] & 0x7f) == BSS_MEMBERSHIP_SELECTOR_HT_PHY)
1510                         continue;
1511
1512                 for (j = 0; j < sband->n_bitrates; j++) {
1513                         if (sband->bitrates[j].bitrate == rate) {
1514                                 *rates |= BIT(j);
1515                                 if (is_basic)
1516                                         *basic_rates |= BIT(j);
1517                                 if (rate < *min_rate) {
1518                                         *min_rate = rate;
1519                                         *min_rate_index = j;
1520                                 }
1521                                 break;
1522                         }
1523                 }
1524         }
1525 }
1526
1527 static bool ieee80211_assoc_success(struct ieee80211_work *wk,
1528                                     struct ieee80211_mgmt *mgmt, size_t len)
1529 {
1530         struct ieee80211_sub_if_data *sdata = wk->sdata;
1531         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1532         struct ieee80211_local *local = sdata->local;
1533         struct ieee80211_supported_band *sband;
1534         struct sta_info *sta;
1535         struct cfg80211_bss *cbss = wk->assoc.bss;
1536         u8 *pos;
1537         u32 rates, basic_rates;
1538         u16 capab_info, aid;
1539         struct ieee802_11_elems elems;
1540         struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1541         u32 changed = 0;
1542         int err;
1543         bool have_higher_than_11mbit = false;
1544         u16 ap_ht_cap_flags;
1545         int min_rate = INT_MAX, min_rate_index = -1;
1546
1547         /* AssocResp and ReassocResp have identical structure */
1548
1549         aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
1550         capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
1551
1552         if ((aid & (BIT(15) | BIT(14))) != (BIT(15) | BIT(14)))
1553                 printk(KERN_DEBUG
1554                        "%s: invalid AID value 0x%x; bits 15:14 not set\n",
1555                        sdata->name, aid);
1556         aid &= ~(BIT(15) | BIT(14));
1557
1558         ifmgd->broken_ap = false;
1559
1560         if (aid == 0 || aid > IEEE80211_MAX_AID) {
1561                 printk(KERN_DEBUG
1562                        "%s: invalid AID value %d (out of range), turn off PS\n",
1563                        sdata->name, aid);
1564                 aid = 0;
1565                 ifmgd->broken_ap = true;
1566         }
1567
1568         pos = mgmt->u.assoc_resp.variable;
1569         ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), &elems);
1570
1571         if (!elems.supp_rates) {
1572                 printk(KERN_DEBUG "%s: no SuppRates element in AssocResp\n",
1573                        sdata->name);
1574                 return false;
1575         }
1576
1577         ifmgd->aid = aid;
1578
1579         mutex_lock(&sdata->local->sta_mtx);
1580         /*
1581          * station info was already allocated and inserted before
1582          * the association and should be available to us
1583          */
1584         sta = sta_info_get_rx(sdata, cbss->bssid);
1585         if (WARN_ON(!sta)) {
1586                 mutex_unlock(&sdata->local->sta_mtx);
1587                 return false;
1588         }
1589
1590         err = sta_info_move_state(sta, IEEE80211_STA_AUTH);
1591         if (!err)
1592                 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
1593         if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
1594                 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
1595         if (err) {
1596                 printk(KERN_DEBUG
1597                        "%s: failed to move station %pM to desired state\n",
1598                        sdata->name, sta->sta.addr);
1599                 WARN_ON(__sta_info_destroy(sta));
1600                 mutex_unlock(&sdata->local->sta_mtx);
1601                 return false;
1602         }
1603
1604         rates = 0;
1605         basic_rates = 0;
1606         sband = local->hw.wiphy->bands[wk->chan->band];
1607
1608         ieee80211_get_rates(sband, elems.supp_rates, elems.supp_rates_len,
1609                             &rates, &basic_rates, &have_higher_than_11mbit,
1610                             &min_rate, &min_rate_index);
1611
1612         ieee80211_get_rates(sband, elems.ext_supp_rates,
1613                             elems.ext_supp_rates_len, &rates, &basic_rates,
1614                             &have_higher_than_11mbit,
1615                             &min_rate, &min_rate_index);
1616
1617         /*
1618          * some buggy APs don't advertise basic_rates. use the lowest
1619          * supported rate instead.
1620          */
1621         if (unlikely(!basic_rates) && min_rate_index >= 0) {
1622                 printk(KERN_DEBUG "%s: No basic rates in AssocResp. "
1623                        "Using min supported rate instead.\n", sdata->name);
1624                 basic_rates = BIT(min_rate_index);
1625         }
1626
1627         sta->sta.supp_rates[wk->chan->band] = rates;
1628         sdata->vif.bss_conf.basic_rates = basic_rates;
1629
1630         /* cf. IEEE 802.11 9.2.12 */
1631         if (wk->chan->band == IEEE80211_BAND_2GHZ &&
1632             have_higher_than_11mbit)
1633                 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
1634         else
1635                 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
1636
1637         if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_11N))
1638                 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
1639                                 elems.ht_cap_elem, &sta->sta.ht_cap);
1640
1641         ap_ht_cap_flags = sta->sta.ht_cap.cap;
1642
1643         rate_control_rate_init(sta);
1644
1645         if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED)
1646                 set_sta_flag(sta, WLAN_STA_MFP);
1647
1648         if (elems.wmm_param)
1649                 set_sta_flag(sta, WLAN_STA_WME);
1650
1651         /* sta_info_reinsert will also unlock the mutex lock */
1652         err = sta_info_reinsert(sta);
1653         sta = NULL;
1654         if (err) {
1655                 printk(KERN_DEBUG "%s: failed to insert STA entry for"
1656                        " the AP (error %d)\n", sdata->name, err);
1657                 return false;
1658         }
1659
1660         /*
1661          * Always handle WMM once after association regardless
1662          * of the first value the AP uses. Setting -1 here has
1663          * that effect because the AP values is an unsigned
1664          * 4-bit value.
1665          */
1666         ifmgd->wmm_last_param_set = -1;
1667
1668         if (elems.wmm_param)
1669                 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
1670                                          elems.wmm_param_len);
1671         else
1672                 ieee80211_set_wmm_default(sdata);
1673
1674         local->oper_channel = wk->chan;
1675
1676         if (elems.ht_info_elem && elems.wmm_param &&
1677             (sdata->local->hw.queues >= 4) &&
1678             !(ifmgd->flags & IEEE80211_STA_DISABLE_11N))
1679                 changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem,
1680                                                cbss->bssid, ap_ht_cap_flags,
1681                                                false);
1682
1683         /* set AID and assoc capability,
1684          * ieee80211_set_associated() will tell the driver */
1685         bss_conf->aid = aid;
1686         bss_conf->assoc_capability = capab_info;
1687         ieee80211_set_associated(sdata, cbss, changed);
1688
1689         /*
1690          * If we're using 4-addr mode, let the AP know that we're
1691          * doing so, so that it can create the STA VLAN on its side
1692          */
1693         if (ifmgd->use_4addr)
1694                 ieee80211_send_4addr_nullfunc(local, sdata);
1695
1696         /*
1697          * Start timer to probe the connection to the AP now.
1698          * Also start the timer that will detect beacon loss.
1699          */
1700         ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
1701         ieee80211_sta_reset_beacon_monitor(sdata);
1702
1703         return true;
1704 }
1705
1706
1707 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
1708                                   struct ieee80211_mgmt *mgmt,
1709                                   size_t len,
1710                                   struct ieee80211_rx_status *rx_status,
1711                                   struct ieee802_11_elems *elems,
1712                                   bool beacon)
1713 {
1714         struct ieee80211_local *local = sdata->local;
1715         int freq;
1716         struct ieee80211_bss *bss;
1717         struct ieee80211_channel *channel;
1718         bool need_ps = false;
1719
1720         if (sdata->u.mgd.associated) {
1721                 bss = (void *)sdata->u.mgd.associated->priv;
1722                 /* not previously set so we may need to recalc */
1723                 need_ps = !bss->dtim_period;
1724         }
1725
1726         if (elems->ds_params && elems->ds_params_len == 1)
1727                 freq = ieee80211_channel_to_frequency(elems->ds_params[0],
1728                                                       rx_status->band);
1729         else
1730                 freq = rx_status->freq;
1731
1732         channel = ieee80211_get_channel(local->hw.wiphy, freq);
1733
1734         if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
1735                 return;
1736
1737         bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
1738                                         channel, beacon);
1739         if (bss)
1740                 ieee80211_rx_bss_put(local, bss);
1741
1742         if (!sdata->u.mgd.associated)
1743                 return;
1744
1745         if (need_ps) {
1746                 mutex_lock(&local->iflist_mtx);
1747                 ieee80211_recalc_ps(local, -1);
1748                 mutex_unlock(&local->iflist_mtx);
1749         }
1750
1751         if (elems->ch_switch_elem && (elems->ch_switch_elem_len == 3) &&
1752             (memcmp(mgmt->bssid, sdata->u.mgd.associated->bssid,
1753                                                         ETH_ALEN) == 0)) {
1754                 struct ieee80211_channel_sw_ie *sw_elem =
1755                         (struct ieee80211_channel_sw_ie *)elems->ch_switch_elem;
1756                 ieee80211_sta_process_chanswitch(sdata, sw_elem,
1757                                                  bss, rx_status->mactime);
1758         }
1759 }
1760
1761
1762 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
1763                                          struct sk_buff *skb)
1764 {
1765         struct ieee80211_mgmt *mgmt = (void *)skb->data;
1766         struct ieee80211_if_managed *ifmgd;
1767         struct ieee80211_rx_status *rx_status = (void *) skb->cb;
1768         size_t baselen, len = skb->len;
1769         struct ieee802_11_elems elems;
1770
1771         ifmgd = &sdata->u.mgd;
1772
1773         ASSERT_MGD_MTX(ifmgd);
1774
1775         if (memcmp(mgmt->da, sdata->vif.addr, ETH_ALEN))
1776                 return; /* ignore ProbeResp to foreign address */
1777
1778         baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
1779         if (baselen > len)
1780                 return;
1781
1782         ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
1783                                 &elems);
1784
1785         ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems, false);
1786
1787         if (ifmgd->associated &&
1788             memcmp(mgmt->bssid, ifmgd->associated->bssid, ETH_ALEN) == 0)
1789                 ieee80211_reset_ap_probe(sdata);
1790 }
1791
1792 /*
1793  * This is the canonical list of information elements we care about,
1794  * the filter code also gives us all changes to the Microsoft OUI
1795  * (00:50:F2) vendor IE which is used for WMM which we need to track.
1796  *
1797  * We implement beacon filtering in software since that means we can
1798  * avoid processing the frame here and in cfg80211, and userspace
1799  * will not be able to tell whether the hardware supports it or not.
1800  *
1801  * XXX: This list needs to be dynamic -- userspace needs to be able to
1802  *      add items it requires. It also needs to be able to tell us to
1803  *      look out for other vendor IEs.
1804  */
1805 static const u64 care_about_ies =
1806         (1ULL << WLAN_EID_COUNTRY) |
1807         (1ULL << WLAN_EID_ERP_INFO) |
1808         (1ULL << WLAN_EID_CHANNEL_SWITCH) |
1809         (1ULL << WLAN_EID_PWR_CONSTRAINT) |
1810         (1ULL << WLAN_EID_HT_CAPABILITY) |
1811         (1ULL << WLAN_EID_HT_INFORMATION);
1812
1813 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
1814                                      struct ieee80211_mgmt *mgmt,
1815                                      size_t len,
1816                                      struct ieee80211_rx_status *rx_status)
1817 {
1818         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1819         struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
1820         size_t baselen;
1821         struct ieee802_11_elems elems;
1822         struct ieee80211_local *local = sdata->local;
1823         u32 changed = 0;
1824         bool erp_valid, directed_tim = false;
1825         u8 erp_value = 0;
1826         u32 ncrc;
1827         u8 *bssid;
1828
1829         ASSERT_MGD_MTX(ifmgd);
1830
1831         /* Process beacon from the current BSS */
1832         baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
1833         if (baselen > len)
1834                 return;
1835
1836         if (rx_status->freq != local->hw.conf.channel->center_freq)
1837                 return;
1838
1839         /*
1840          * We might have received a number of frames, among them a
1841          * disassoc frame and a beacon...
1842          */
1843         if (!ifmgd->associated)
1844                 return;
1845
1846         bssid = ifmgd->associated->bssid;
1847
1848         /*
1849          * And in theory even frames from a different AP we were just
1850          * associated to a split-second ago!
1851          */
1852         if (memcmp(bssid, mgmt->bssid, ETH_ALEN) != 0)
1853                 return;
1854
1855         /* Track average RSSI from the Beacon frames of the current AP */
1856         ifmgd->last_beacon_signal = rx_status->signal;
1857         if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
1858                 ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
1859                 ifmgd->ave_beacon_signal = rx_status->signal * 16;
1860                 ifmgd->last_cqm_event_signal = 0;
1861                 ifmgd->count_beacon_signal = 1;
1862                 ifmgd->last_ave_beacon_signal = 0;
1863         } else {
1864                 ifmgd->ave_beacon_signal =
1865                         (IEEE80211_SIGNAL_AVE_WEIGHT * rx_status->signal * 16 +
1866                          (16 - IEEE80211_SIGNAL_AVE_WEIGHT) *
1867                          ifmgd->ave_beacon_signal) / 16;
1868                 ifmgd->count_beacon_signal++;
1869         }
1870
1871         if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
1872             ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
1873                 int sig = ifmgd->ave_beacon_signal;
1874                 int last_sig = ifmgd->last_ave_beacon_signal;
1875
1876                 /*
1877                  * if signal crosses either of the boundaries, invoke callback
1878                  * with appropriate parameters
1879                  */
1880                 if (sig > ifmgd->rssi_max_thold &&
1881                     (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
1882                         ifmgd->last_ave_beacon_signal = sig;
1883                         drv_rssi_callback(local, RSSI_EVENT_HIGH);
1884                 } else if (sig < ifmgd->rssi_min_thold &&
1885                            (last_sig >= ifmgd->rssi_max_thold ||
1886                            last_sig == 0)) {
1887                         ifmgd->last_ave_beacon_signal = sig;
1888                         drv_rssi_callback(local, RSSI_EVENT_LOW);
1889                 }
1890         }
1891
1892         if (bss_conf->cqm_rssi_thold &&
1893             ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
1894             !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
1895                 int sig = ifmgd->ave_beacon_signal / 16;
1896                 int last_event = ifmgd->last_cqm_event_signal;
1897                 int thold = bss_conf->cqm_rssi_thold;
1898                 int hyst = bss_conf->cqm_rssi_hyst;
1899                 if (sig < thold &&
1900                     (last_event == 0 || sig < last_event - hyst)) {
1901                         ifmgd->last_cqm_event_signal = sig;
1902                         ieee80211_cqm_rssi_notify(
1903                                 &sdata->vif,
1904                                 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
1905                                 GFP_KERNEL);
1906                 } else if (sig > thold &&
1907                            (last_event == 0 || sig > last_event + hyst)) {
1908                         ifmgd->last_cqm_event_signal = sig;
1909                         ieee80211_cqm_rssi_notify(
1910                                 &sdata->vif,
1911                                 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
1912                                 GFP_KERNEL);
1913                 }
1914         }
1915
1916         if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) {
1917 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
1918                 if (net_ratelimit()) {
1919                         printk(KERN_DEBUG "%s: cancelling probereq poll due "
1920                                "to a received beacon\n", sdata->name);
1921                 }
1922 #endif
1923                 ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL;
1924                 mutex_lock(&local->iflist_mtx);
1925                 ieee80211_recalc_ps(local, -1);
1926                 mutex_unlock(&local->iflist_mtx);
1927         }
1928
1929         /*
1930          * Push the beacon loss detection into the future since
1931          * we are processing a beacon from the AP just now.
1932          */
1933         ieee80211_sta_reset_beacon_monitor(sdata);
1934
1935         ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
1936         ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
1937                                           len - baselen, &elems,
1938                                           care_about_ies, ncrc);
1939
1940         if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK)
1941                 directed_tim = ieee80211_check_tim(elems.tim, elems.tim_len,
1942                                                    ifmgd->aid);
1943
1944         if (ncrc != ifmgd->beacon_crc || !ifmgd->beacon_crc_valid) {
1945                 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems,
1946                                       true);
1947
1948                 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
1949                                          elems.wmm_param_len);
1950         }
1951
1952         if (local->hw.flags & IEEE80211_HW_PS_NULLFUNC_STACK) {
1953                 if (directed_tim) {
1954                         if (local->hw.conf.dynamic_ps_timeout > 0) {
1955                                 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1956                                 ieee80211_hw_config(local,
1957                                                     IEEE80211_CONF_CHANGE_PS);
1958                                 ieee80211_send_nullfunc(local, sdata, 0);
1959                         } else {
1960                                 local->pspolling = true;
1961
1962                                 /*
1963                                  * Here is assumed that the driver will be
1964                                  * able to send ps-poll frame and receive a
1965                                  * response even though power save mode is
1966                                  * enabled, but some drivers might require
1967                                  * to disable power save here. This needs
1968                                  * to be investigated.
1969                                  */
1970                                 ieee80211_send_pspoll(local, sdata);
1971                         }
1972                 }
1973         }
1974
1975         if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
1976                 return;
1977         ifmgd->beacon_crc = ncrc;
1978         ifmgd->beacon_crc_valid = true;
1979
1980         if (elems.erp_info && elems.erp_info_len >= 1) {
1981                 erp_valid = true;
1982                 erp_value = elems.erp_info[0];
1983         } else {
1984                 erp_valid = false;
1985         }
1986         changed |= ieee80211_handle_bss_capability(sdata,
1987                         le16_to_cpu(mgmt->u.beacon.capab_info),
1988                         erp_valid, erp_value);
1989
1990
1991         if (elems.ht_cap_elem && elems.ht_info_elem && elems.wmm_param &&
1992             !(ifmgd->flags & IEEE80211_STA_DISABLE_11N)) {
1993                 struct sta_info *sta;
1994                 struct ieee80211_supported_band *sband;
1995                 u16 ap_ht_cap_flags;
1996
1997                 rcu_read_lock();
1998
1999                 sta = sta_info_get(sdata, bssid);
2000                 if (WARN_ON(!sta)) {
2001                         rcu_read_unlock();
2002                         return;
2003                 }
2004
2005                 sband = local->hw.wiphy->bands[local->hw.conf.channel->band];
2006
2007                 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
2008                                 elems.ht_cap_elem, &sta->sta.ht_cap);
2009
2010                 ap_ht_cap_flags = sta->sta.ht_cap.cap;
2011
2012                 rcu_read_unlock();
2013
2014                 changed |= ieee80211_enable_ht(sdata, elems.ht_info_elem,
2015                                                bssid, ap_ht_cap_flags, true);
2016         }
2017
2018         /* Note: country IE parsing is done for us by cfg80211 */
2019         if (elems.country_elem) {
2020                 /* TODO: IBSS also needs this */
2021                 if (elems.pwr_constr_elem)
2022                         ieee80211_handle_pwr_constr(sdata,
2023                                 le16_to_cpu(mgmt->u.probe_resp.capab_info),
2024                                 elems.pwr_constr_elem,
2025                                 elems.pwr_constr_elem_len);
2026         }
2027
2028         ieee80211_bss_info_change_notify(sdata, changed);
2029 }
2030
2031 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
2032                                   struct sk_buff *skb)
2033 {
2034         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2035         struct ieee80211_rx_status *rx_status;
2036         struct ieee80211_mgmt *mgmt;
2037         enum rx_mgmt_action rma = RX_MGMT_NONE;
2038         u16 fc;
2039
2040         rx_status = (struct ieee80211_rx_status *) skb->cb;
2041         mgmt = (struct ieee80211_mgmt *) skb->data;
2042         fc = le16_to_cpu(mgmt->frame_control);
2043
2044         mutex_lock(&ifmgd->mtx);
2045
2046         if (ifmgd->associated &&
2047             memcmp(ifmgd->associated->bssid, mgmt->bssid, ETH_ALEN) == 0) {
2048                 switch (fc & IEEE80211_FCTL_STYPE) {
2049                 case IEEE80211_STYPE_BEACON:
2050                         ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len,
2051                                                  rx_status);
2052                         break;
2053                 case IEEE80211_STYPE_PROBE_RESP:
2054                         ieee80211_rx_mgmt_probe_resp(sdata, skb);
2055                         break;
2056                 case IEEE80211_STYPE_DEAUTH:
2057                         rma = ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
2058                         break;
2059                 case IEEE80211_STYPE_DISASSOC:
2060                         rma = ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
2061                         break;
2062                 case IEEE80211_STYPE_ACTION:
2063                         switch (mgmt->u.action.category) {
2064                         case WLAN_CATEGORY_SPECTRUM_MGMT:
2065                                 ieee80211_sta_process_chanswitch(sdata,
2066                                                 &mgmt->u.action.u.chan_switch.sw_elem,
2067                                                 (void *)ifmgd->associated->priv,
2068                                                 rx_status->mactime);
2069                                 break;
2070                         }
2071                 }
2072                 mutex_unlock(&ifmgd->mtx);
2073
2074                 switch (rma) {
2075                 case RX_MGMT_NONE:
2076                         /* no action */
2077                         break;
2078                 case RX_MGMT_CFG80211_DEAUTH:
2079                         cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
2080                         break;
2081                 case RX_MGMT_CFG80211_DISASSOC:
2082                         cfg80211_send_disassoc(sdata->dev, (u8 *)mgmt, skb->len);
2083                         break;
2084                 default:
2085                         WARN(1, "unexpected: %d", rma);
2086                 }
2087                 return;
2088         }
2089
2090         mutex_unlock(&ifmgd->mtx);
2091
2092         if (skb->len >= 24 + 2 /* mgmt + deauth reason */ &&
2093             (fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_DEAUTH) {
2094                 struct ieee80211_local *local = sdata->local;
2095                 struct ieee80211_work *wk;
2096
2097                 mutex_lock(&local->mtx);
2098                 list_for_each_entry(wk, &local->work_list, list) {
2099                         if (wk->sdata != sdata)
2100                                 continue;
2101
2102                         if (wk->type != IEEE80211_WORK_ASSOC &&
2103                             wk->type != IEEE80211_WORK_ASSOC_BEACON_WAIT)
2104                                 continue;
2105
2106                         if (memcmp(mgmt->bssid, wk->filter_ta, ETH_ALEN))
2107                                 continue;
2108                         if (memcmp(mgmt->sa, wk->filter_ta, ETH_ALEN))
2109                                 continue;
2110
2111                         /*
2112                          * Printing the message only here means we can't
2113                          * spuriously print it, but it also means that it
2114                          * won't be printed when the frame comes in before
2115                          * we even tried to associate or in similar cases.
2116                          *
2117                          * Ultimately, I suspect cfg80211 should print the
2118                          * messages instead.
2119                          */
2120                         printk(KERN_DEBUG
2121                                "%s: deauthenticated from %pM (Reason: %u)\n",
2122                                sdata->name, mgmt->bssid,
2123                                le16_to_cpu(mgmt->u.deauth.reason_code));
2124
2125                         list_del_rcu(&wk->list);
2126                         free_work(wk);
2127                         break;
2128                 }
2129                 mutex_unlock(&local->mtx);
2130
2131                 cfg80211_send_deauth(sdata->dev, (u8 *)mgmt, skb->len);
2132         }
2133 }
2134
2135 static void ieee80211_sta_timer(unsigned long data)
2136 {
2137         struct ieee80211_sub_if_data *sdata =
2138                 (struct ieee80211_sub_if_data *) data;
2139         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2140         struct ieee80211_local *local = sdata->local;
2141
2142         if (local->quiescing) {
2143                 set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
2144                 return;
2145         }
2146
2147         ieee80211_queue_work(&local->hw, &sdata->work);
2148 }
2149
2150 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
2151                                           u8 *bssid, u8 reason)
2152 {
2153         struct ieee80211_local *local = sdata->local;
2154         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2155
2156         ifmgd->flags &= ~(IEEE80211_STA_CONNECTION_POLL |
2157                           IEEE80211_STA_BEACON_POLL);
2158
2159         ieee80211_set_disassoc(sdata, true, true);
2160         mutex_unlock(&ifmgd->mtx);
2161         /*
2162          * must be outside lock due to cfg80211,
2163          * but that's not a problem.
2164          */
2165         ieee80211_send_deauth_disassoc(sdata, bssid,
2166                         IEEE80211_STYPE_DEAUTH, reason,
2167                         NULL, true);
2168
2169         mutex_lock(&local->mtx);
2170         ieee80211_recalc_idle(local);
2171         mutex_unlock(&local->mtx);
2172
2173         mutex_lock(&ifmgd->mtx);
2174 }
2175
2176 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
2177 {
2178         struct ieee80211_local *local = sdata->local;
2179         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2180
2181         /* then process the rest of the work */
2182         mutex_lock(&ifmgd->mtx);
2183
2184         if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL |
2185                             IEEE80211_STA_CONNECTION_POLL) &&
2186             ifmgd->associated) {
2187                 u8 bssid[ETH_ALEN];
2188                 int max_tries;
2189
2190                 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
2191
2192                 if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)
2193                         max_tries = max_nullfunc_tries;
2194                 else
2195                         max_tries = max_probe_tries;
2196
2197                 /* ACK received for nullfunc probing frame */
2198                 if (!ifmgd->probe_send_count)
2199                         ieee80211_reset_ap_probe(sdata);
2200                 else if (ifmgd->nullfunc_failed) {
2201                         if (ifmgd->probe_send_count < max_tries) {
2202 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
2203                                 wiphy_debug(local->hw.wiphy,
2204                                             "%s: No ack for nullfunc frame to"
2205                                             " AP %pM, try %d/%i\n",
2206                                             sdata->name, bssid,
2207                                             ifmgd->probe_send_count, max_tries);
2208 #endif
2209                                 ieee80211_mgd_probe_ap_send(sdata);
2210                         } else {
2211 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
2212                                 wiphy_debug(local->hw.wiphy,
2213                                             "%s: No ack for nullfunc frame to"
2214                                             " AP %pM, disconnecting.\n",
2215                                             sdata->name, bssid);
2216 #endif
2217                                 ieee80211_sta_connection_lost(sdata, bssid,
2218                                         WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
2219                         }
2220                 } else if (time_is_after_jiffies(ifmgd->probe_timeout))
2221                         run_again(ifmgd, ifmgd->probe_timeout);
2222                 else if (local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS) {
2223 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
2224                         wiphy_debug(local->hw.wiphy,
2225                                     "%s: Failed to send nullfunc to AP %pM"
2226                                     " after %dms, disconnecting.\n",
2227                                     sdata->name,
2228                                     bssid, probe_wait_ms);
2229 #endif
2230                         ieee80211_sta_connection_lost(sdata, bssid,
2231                                 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
2232                 } else if (ifmgd->probe_send_count < max_tries) {
2233 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
2234                         wiphy_debug(local->hw.wiphy,
2235                                     "%s: No probe response from AP %pM"
2236                                     " after %dms, try %d/%i\n",
2237                                     sdata->name,
2238                                     bssid, probe_wait_ms,
2239                                     ifmgd->probe_send_count, max_tries);
2240 #endif
2241                         ieee80211_mgd_probe_ap_send(sdata);
2242                 } else {
2243                         /*
2244                          * We actually lost the connection ... or did we?
2245                          * Let's make sure!
2246                          */
2247                         wiphy_debug(local->hw.wiphy,
2248                                     "%s: No probe response from AP %pM"
2249                                     " after %dms, disconnecting.\n",
2250                                     sdata->name,
2251                                     bssid, probe_wait_ms);
2252
2253                         ieee80211_sta_connection_lost(sdata, bssid,
2254                                 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
2255                 }
2256         }
2257
2258         mutex_unlock(&ifmgd->mtx);
2259 }
2260
2261 static void ieee80211_sta_bcn_mon_timer(unsigned long data)
2262 {
2263         struct ieee80211_sub_if_data *sdata =
2264                 (struct ieee80211_sub_if_data *) data;
2265         struct ieee80211_local *local = sdata->local;
2266
2267         if (local->quiescing)
2268                 return;
2269
2270         ieee80211_queue_work(&sdata->local->hw,
2271                              &sdata->u.mgd.beacon_connection_loss_work);
2272 }
2273
2274 static void ieee80211_sta_conn_mon_timer(unsigned long data)
2275 {
2276         struct ieee80211_sub_if_data *sdata =
2277                 (struct ieee80211_sub_if_data *) data;
2278         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2279         struct ieee80211_local *local = sdata->local;
2280
2281         if (local->quiescing)
2282                 return;
2283
2284         ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
2285 }
2286
2287 static void ieee80211_sta_monitor_work(struct work_struct *work)
2288 {
2289         struct ieee80211_sub_if_data *sdata =
2290                 container_of(work, struct ieee80211_sub_if_data,
2291                              u.mgd.monitor_work);
2292
2293         ieee80211_mgd_probe_ap(sdata, false);
2294 }
2295
2296 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
2297 {
2298         if (sdata->vif.type == NL80211_IFTYPE_STATION) {
2299                 sdata->u.mgd.flags &= ~(IEEE80211_STA_BEACON_POLL |
2300                                         IEEE80211_STA_CONNECTION_POLL);
2301
2302                 /* let's probe the connection once */
2303                 ieee80211_queue_work(&sdata->local->hw,
2304                            &sdata->u.mgd.monitor_work);
2305                 /* and do all the other regular work too */
2306                 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
2307         }
2308 }
2309
2310 #ifdef CONFIG_PM
2311 void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata)
2312 {
2313         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2314
2315         /*
2316          * we need to use atomic bitops for the running bits
2317          * only because both timers might fire at the same
2318          * time -- the code here is properly synchronised.
2319          */
2320
2321         cancel_work_sync(&ifmgd->request_smps_work);
2322
2323         cancel_work_sync(&ifmgd->monitor_work);
2324         cancel_work_sync(&ifmgd->beacon_connection_loss_work);
2325         if (del_timer_sync(&ifmgd->timer))
2326                 set_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running);
2327
2328         cancel_work_sync(&ifmgd->chswitch_work);
2329         if (del_timer_sync(&ifmgd->chswitch_timer))
2330                 set_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running);
2331
2332         /* these will just be re-established on connection */
2333         del_timer_sync(&ifmgd->conn_mon_timer);
2334         del_timer_sync(&ifmgd->bcn_mon_timer);
2335 }
2336
2337 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
2338 {
2339         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2340
2341         if (!ifmgd->associated)
2342                 return;
2343
2344         if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
2345                 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
2346                 mutex_lock(&ifmgd->mtx);
2347                 if (ifmgd->associated) {
2348 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
2349                         wiphy_debug(sdata->local->hw.wiphy,
2350                                     "%s: driver requested disconnect after resume.\n",
2351                                     sdata->name);
2352 #endif
2353                         ieee80211_sta_connection_lost(sdata,
2354                                 ifmgd->associated->bssid,
2355                                 WLAN_REASON_UNSPECIFIED);
2356                         mutex_unlock(&ifmgd->mtx);
2357                         return;
2358                 }
2359                 mutex_unlock(&ifmgd->mtx);
2360         }
2361
2362         if (test_and_clear_bit(TMR_RUNNING_TIMER, &ifmgd->timers_running))
2363                 add_timer(&ifmgd->timer);
2364         if (test_and_clear_bit(TMR_RUNNING_CHANSW, &ifmgd->timers_running))
2365                 add_timer(&ifmgd->chswitch_timer);
2366         ieee80211_sta_reset_beacon_monitor(sdata);
2367         ieee80211_restart_sta_timer(sdata);
2368         ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.monitor_work);
2369 }
2370 #endif
2371
2372 /* interface setup */
2373 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
2374 {
2375         struct ieee80211_if_managed *ifmgd;
2376
2377         ifmgd = &sdata->u.mgd;
2378         INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
2379         INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
2380         INIT_WORK(&ifmgd->beacon_connection_loss_work,
2381                   ieee80211_beacon_connection_loss_work);
2382         INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_work);
2383         setup_timer(&ifmgd->timer, ieee80211_sta_timer,
2384                     (unsigned long) sdata);
2385         setup_timer(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer,
2386                     (unsigned long) sdata);
2387         setup_timer(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer,
2388                     (unsigned long) sdata);
2389         setup_timer(&ifmgd->chswitch_timer, ieee80211_chswitch_timer,
2390                     (unsigned long) sdata);
2391
2392         ifmgd->flags = 0;
2393         ifmgd->powersave = sdata->wdev.ps;
2394
2395         mutex_init(&ifmgd->mtx);
2396
2397         if (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS)
2398                 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
2399         else
2400                 ifmgd->req_smps = IEEE80211_SMPS_OFF;
2401 }
2402
2403 /* scan finished notification */
2404 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
2405 {
2406         struct ieee80211_sub_if_data *sdata = local->scan_sdata;
2407
2408         /* Restart STA timers */
2409         rcu_read_lock();
2410         list_for_each_entry_rcu(sdata, &local->interfaces, list)
2411                 ieee80211_restart_sta_timer(sdata);
2412         rcu_read_unlock();
2413 }
2414
2415 int ieee80211_max_network_latency(struct notifier_block *nb,
2416                                   unsigned long data, void *dummy)
2417 {
2418         s32 latency_usec = (s32) data;
2419         struct ieee80211_local *local =
2420                 container_of(nb, struct ieee80211_local,
2421                              network_latency_notifier);
2422
2423         mutex_lock(&local->iflist_mtx);
2424         ieee80211_recalc_ps(local, latency_usec);
2425         mutex_unlock(&local->iflist_mtx);
2426
2427         return 0;
2428 }
2429
2430 /* config hooks */
2431 static enum work_done_result
2432 ieee80211_probe_auth_done(struct ieee80211_work *wk,
2433                           struct sk_buff *skb)
2434 {
2435         struct ieee80211_local *local = wk->sdata->local;
2436
2437         if (!skb) {
2438                 cfg80211_send_auth_timeout(wk->sdata->dev, wk->filter_ta);
2439                 goto destroy;
2440         }
2441
2442         if (wk->type == IEEE80211_WORK_AUTH) {
2443                 cfg80211_send_rx_auth(wk->sdata->dev, skb->data, skb->len);
2444                 goto destroy;
2445         }
2446
2447         mutex_lock(&wk->sdata->u.mgd.mtx);
2448         ieee80211_rx_mgmt_probe_resp(wk->sdata, skb);
2449         mutex_unlock(&wk->sdata->u.mgd.mtx);
2450
2451         wk->type = IEEE80211_WORK_AUTH;
2452         wk->probe_auth.tries = 0;
2453         return WORK_DONE_REQUEUE;
2454  destroy:
2455         if (wk->probe_auth.synced)
2456                 drv_finish_tx_sync(local, wk->sdata, wk->filter_ta,
2457                                    IEEE80211_TX_SYNC_AUTH);
2458
2459         return WORK_DONE_DESTROY;
2460 }
2461
2462 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
2463                        struct cfg80211_auth_request *req)
2464 {
2465         const u8 *ssid;
2466         struct ieee80211_work *wk;
2467         u16 auth_alg;
2468
2469         if (req->local_state_change)
2470                 return 0; /* no need to update mac80211 state */
2471
2472         switch (req->auth_type) {
2473         case NL80211_AUTHTYPE_OPEN_SYSTEM:
2474                 auth_alg = WLAN_AUTH_OPEN;
2475                 break;
2476         case NL80211_AUTHTYPE_SHARED_KEY:
2477                 if (IS_ERR(sdata->local->wep_tx_tfm))
2478                         return -EOPNOTSUPP;
2479                 auth_alg = WLAN_AUTH_SHARED_KEY;
2480                 break;
2481         case NL80211_AUTHTYPE_FT:
2482                 auth_alg = WLAN_AUTH_FT;
2483                 break;
2484         case NL80211_AUTHTYPE_NETWORK_EAP:
2485                 auth_alg = WLAN_AUTH_LEAP;
2486                 break;
2487         default:
2488                 return -EOPNOTSUPP;
2489         }
2490
2491         wk = kzalloc(sizeof(*wk) + req->ie_len, GFP_KERNEL);
2492         if (!wk)
2493                 return -ENOMEM;
2494
2495         memcpy(wk->filter_ta, req->bss->bssid, ETH_ALEN);
2496
2497         if (req->ie && req->ie_len) {
2498                 memcpy(wk->ie, req->ie, req->ie_len);
2499                 wk->ie_len = req->ie_len;
2500         }
2501
2502         if (req->key && req->key_len) {
2503                 wk->probe_auth.key_len = req->key_len;
2504                 wk->probe_auth.key_idx = req->key_idx;
2505                 memcpy(wk->probe_auth.key, req->key, req->key_len);
2506         }
2507
2508         ssid = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
2509         memcpy(wk->probe_auth.ssid, ssid + 2, ssid[1]);
2510         wk->probe_auth.ssid_len = ssid[1];
2511
2512         wk->probe_auth.algorithm = auth_alg;
2513         wk->probe_auth.privacy = req->bss->capability & WLAN_CAPABILITY_PRIVACY;
2514
2515         /* if we already have a probe, don't probe again */
2516         if (req->bss->proberesp_ies)
2517                 wk->type = IEEE80211_WORK_AUTH;
2518         else
2519                 wk->type = IEEE80211_WORK_DIRECT_PROBE;
2520         wk->chan = req->bss->channel;
2521         wk->chan_type = NL80211_CHAN_NO_HT;
2522         wk->sdata = sdata;
2523         wk->done = ieee80211_probe_auth_done;
2524
2525         ieee80211_add_work(wk);
2526         return 0;
2527 }
2528
2529 /* create and insert a dummy station entry */
2530 static int ieee80211_pre_assoc(struct ieee80211_sub_if_data *sdata,
2531                                 u8 *bssid) {
2532         struct sta_info *sta;
2533         int err;
2534
2535         sta = sta_info_alloc(sdata, bssid, GFP_KERNEL);
2536         if (!sta)
2537                 return -ENOMEM;
2538
2539         sta->dummy = true;
2540
2541         err = sta_info_insert(sta);
2542         sta = NULL;
2543         if (err) {
2544                 printk(KERN_DEBUG "%s: failed to insert Dummy STA entry for"
2545                        " the AP (error %d)\n", sdata->name, err);
2546                 return err;
2547         }
2548
2549         return 0;
2550 }
2551
2552 static enum work_done_result ieee80211_assoc_done(struct ieee80211_work *wk,
2553                                                   struct sk_buff *skb)
2554 {
2555         struct ieee80211_local *local = wk->sdata->local;
2556         struct ieee80211_mgmt *mgmt;
2557         struct ieee80211_rx_status *rx_status;
2558         struct ieee802_11_elems elems;
2559         struct cfg80211_bss *cbss = wk->assoc.bss;
2560         u16 status;
2561
2562         if (!skb) {
2563                 sta_info_destroy_addr(wk->sdata, cbss->bssid);
2564                 cfg80211_send_assoc_timeout(wk->sdata->dev, wk->filter_ta);
2565                 goto destroy;
2566         }
2567
2568         if (wk->type == IEEE80211_WORK_ASSOC_BEACON_WAIT) {
2569                 mutex_lock(&wk->sdata->u.mgd.mtx);
2570                 rx_status = (void *) skb->cb;
2571                 ieee802_11_parse_elems(skb->data + 24 + 12, skb->len - 24 - 12, &elems);
2572                 ieee80211_rx_bss_info(wk->sdata, (void *)skb->data, skb->len, rx_status,
2573                                       &elems, true);
2574                 mutex_unlock(&wk->sdata->u.mgd.mtx);
2575
2576                 wk->type = IEEE80211_WORK_ASSOC;
2577                 /* not really done yet */
2578                 return WORK_DONE_REQUEUE;
2579         }
2580
2581         mgmt = (void *)skb->data;
2582         status = le16_to_cpu(mgmt->u.assoc_resp.status_code);
2583
2584         if (status == WLAN_STATUS_SUCCESS) {
2585                 if (wk->assoc.synced)
2586                         drv_finish_tx_sync(local, wk->sdata, wk->filter_ta,
2587                                            IEEE80211_TX_SYNC_ASSOC);
2588
2589                 mutex_lock(&wk->sdata->u.mgd.mtx);
2590                 if (!ieee80211_assoc_success(wk, mgmt, skb->len)) {
2591                         mutex_unlock(&wk->sdata->u.mgd.mtx);
2592                         /* oops -- internal error -- send timeout for now */
2593                         sta_info_destroy_addr(wk->sdata, cbss->bssid);
2594                         cfg80211_send_assoc_timeout(wk->sdata->dev,
2595                                                     wk->filter_ta);
2596                         return WORK_DONE_DESTROY;
2597                 }
2598
2599                 mutex_unlock(&wk->sdata->u.mgd.mtx);
2600         } else {
2601                 /* assoc failed - destroy the dummy station entry */
2602                 sta_info_destroy_addr(wk->sdata, cbss->bssid);
2603         }
2604
2605         cfg80211_send_rx_assoc(wk->sdata->dev, skb->data, skb->len);
2606  destroy:
2607         if (wk->assoc.synced)
2608                 drv_finish_tx_sync(local, wk->sdata, wk->filter_ta,
2609                                    IEEE80211_TX_SYNC_ASSOC);
2610
2611         return WORK_DONE_DESTROY;
2612 }
2613
2614 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
2615                         struct cfg80211_assoc_request *req)
2616 {
2617         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2618         struct ieee80211_bss *bss = (void *)req->bss->priv;
2619         struct ieee80211_work *wk;
2620         const u8 *ssid;
2621         int i, err;
2622
2623         mutex_lock(&ifmgd->mtx);
2624         if (ifmgd->associated) {
2625                 if (!req->prev_bssid ||
2626                     memcmp(req->prev_bssid, ifmgd->associated->bssid,
2627                            ETH_ALEN)) {
2628                         /*
2629                          * We are already associated and the request was not a
2630                          * reassociation request from the current BSS, so
2631                          * reject it.
2632                          */
2633                         mutex_unlock(&ifmgd->mtx);
2634                         return -EALREADY;
2635                 }
2636
2637                 /* Trying to reassociate - clear previous association state */
2638                 ieee80211_set_disassoc(sdata, true, false);
2639         }
2640         mutex_unlock(&ifmgd->mtx);
2641
2642         wk = kzalloc(sizeof(*wk) + req->ie_len, GFP_KERNEL);
2643         if (!wk)
2644                 return -ENOMEM;
2645
2646         /*
2647          * create a dummy station info entry in order
2648          * to start accepting incoming EAPOL packets from the station
2649          */
2650         err = ieee80211_pre_assoc(sdata, req->bss->bssid);
2651         if (err) {
2652                 kfree(wk);
2653                 return err;
2654         }
2655
2656         ifmgd->flags &= ~IEEE80211_STA_DISABLE_11N;
2657         ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
2658
2659         ifmgd->beacon_crc_valid = false;
2660
2661         for (i = 0; i < req->crypto.n_ciphers_pairwise; i++)
2662                 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
2663                     req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
2664                     req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104)
2665                         ifmgd->flags |= IEEE80211_STA_DISABLE_11N;
2666
2667
2668         if (req->flags & ASSOC_REQ_DISABLE_HT)
2669                 ifmgd->flags |= IEEE80211_STA_DISABLE_11N;
2670
2671         memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
2672         memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
2673                sizeof(ifmgd->ht_capa_mask));
2674
2675         if (req->ie && req->ie_len) {
2676                 memcpy(wk->ie, req->ie, req->ie_len);
2677                 wk->ie_len = req->ie_len;
2678         } else
2679                 wk->ie_len = 0;
2680
2681         wk->assoc.bss = req->bss;
2682
2683         memcpy(wk->filter_ta, req->bss->bssid, ETH_ALEN);
2684
2685         /* new association always uses requested smps mode */
2686         if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
2687                 if (ifmgd->powersave)
2688                         ifmgd->ap_smps = IEEE80211_SMPS_DYNAMIC;
2689                 else
2690                         ifmgd->ap_smps = IEEE80211_SMPS_OFF;
2691         } else
2692                 ifmgd->ap_smps = ifmgd->req_smps;
2693
2694         wk->assoc.smps = ifmgd->ap_smps;
2695         /*
2696          * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
2697          * We still associate in non-HT mode (11a/b/g) if any one of these
2698          * ciphers is configured as pairwise.
2699          * We can set this to true for non-11n hardware, that'll be checked
2700          * separately along with the peer capabilities.
2701          */
2702         wk->assoc.use_11n = !(ifmgd->flags & IEEE80211_STA_DISABLE_11N);
2703         wk->assoc.capability = req->bss->capability;
2704         wk->assoc.wmm_used = bss->wmm_used;
2705         wk->assoc.supp_rates = bss->supp_rates;
2706         wk->assoc.supp_rates_len = bss->supp_rates_len;
2707         wk->assoc.ht_information_ie =
2708                 ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_INFORMATION);
2709
2710         if (bss->wmm_used && bss->uapsd_supported &&
2711             (sdata->local->hw.flags & IEEE80211_HW_SUPPORTS_UAPSD)) {
2712                 wk->assoc.uapsd_used = true;
2713                 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
2714         } else {
2715                 wk->assoc.uapsd_used = false;
2716                 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
2717         }
2718
2719         ssid = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
2720         memcpy(wk->assoc.ssid, ssid + 2, ssid[1]);
2721         wk->assoc.ssid_len = ssid[1];
2722
2723         if (req->prev_bssid)
2724                 memcpy(wk->assoc.prev_bssid, req->prev_bssid, ETH_ALEN);
2725
2726         wk->chan = req->bss->channel;
2727         wk->chan_type = NL80211_CHAN_NO_HT;
2728         wk->sdata = sdata;
2729         wk->done = ieee80211_assoc_done;
2730         if (!bss->dtim_period &&
2731             sdata->local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD)
2732                 wk->type = IEEE80211_WORK_ASSOC_BEACON_WAIT;
2733         else
2734                 wk->type = IEEE80211_WORK_ASSOC;
2735
2736         if (req->use_mfp) {
2737                 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
2738                 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
2739         } else {
2740                 ifmgd->mfp = IEEE80211_MFP_DISABLED;
2741                 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
2742         }
2743
2744         if (req->crypto.control_port)
2745                 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
2746         else
2747                 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
2748
2749         sdata->control_port_protocol = req->crypto.control_port_ethertype;
2750         sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
2751
2752         ieee80211_add_work(wk);
2753         return 0;
2754 }
2755
2756 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
2757                          struct cfg80211_deauth_request *req,
2758                          void *cookie)
2759 {
2760         struct ieee80211_local *local = sdata->local;
2761         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2762         u8 bssid[ETH_ALEN];
2763         bool assoc_bss = false;
2764
2765         mutex_lock(&ifmgd->mtx);
2766
2767         memcpy(bssid, req->bss->bssid, ETH_ALEN);
2768         if (ifmgd->associated == req->bss) {
2769                 ieee80211_set_disassoc(sdata, false, true);
2770                 mutex_unlock(&ifmgd->mtx);
2771                 assoc_bss = true;
2772         } else {
2773                 bool not_auth_yet = false;
2774                 struct ieee80211_work *tmp, *wk = NULL;
2775
2776                 mutex_unlock(&ifmgd->mtx);
2777
2778                 mutex_lock(&local->mtx);
2779                 list_for_each_entry(tmp, &local->work_list, list) {
2780                         if (tmp->sdata != sdata)
2781                                 continue;
2782
2783                         if (tmp->type != IEEE80211_WORK_DIRECT_PROBE &&
2784                             tmp->type != IEEE80211_WORK_AUTH &&
2785                             tmp->type != IEEE80211_WORK_ASSOC &&
2786                             tmp->type != IEEE80211_WORK_ASSOC_BEACON_WAIT)
2787                                 continue;
2788
2789                         if (memcmp(req->bss->bssid, tmp->filter_ta, ETH_ALEN))
2790                                 continue;
2791
2792                         not_auth_yet = tmp->type == IEEE80211_WORK_DIRECT_PROBE;
2793                         list_del_rcu(&tmp->list);
2794                         synchronize_rcu();
2795                         wk = tmp;
2796                         break;
2797                 }
2798                 mutex_unlock(&local->mtx);
2799
2800                 if (wk && wk->type == IEEE80211_WORK_ASSOC) {
2801                         /* clean up dummy sta & TX sync */
2802                         sta_info_destroy_addr(wk->sdata, wk->filter_ta);
2803                         if (wk->assoc.synced)
2804                                 drv_finish_tx_sync(local, wk->sdata,
2805                                                    wk->filter_ta,
2806                                                    IEEE80211_TX_SYNC_ASSOC);
2807                 } else if (wk && wk->type == IEEE80211_WORK_AUTH) {
2808                         if (wk->probe_auth.synced)
2809                                 drv_finish_tx_sync(local, wk->sdata,
2810                                                    wk->filter_ta,
2811                                                    IEEE80211_TX_SYNC_AUTH);
2812                 }
2813                 kfree(wk);
2814
2815                 /*
2816                  * If somebody requests authentication and we haven't
2817                  * sent out an auth frame yet there's no need to send
2818                  * out a deauth frame either. If the state was PROBE,
2819                  * then this is the case. If it's AUTH we have sent a
2820                  * frame, and if it's IDLE we have completed the auth
2821                  * process already.
2822                  */
2823                 if (not_auth_yet) {
2824                         __cfg80211_auth_canceled(sdata->dev, bssid);
2825                         return 0;
2826                 }
2827         }
2828
2829         printk(KERN_DEBUG "%s: deauthenticating from %pM by local choice (reason=%d)\n",
2830                sdata->name, bssid, req->reason_code);
2831
2832         ieee80211_send_deauth_disassoc(sdata, bssid, IEEE80211_STYPE_DEAUTH,
2833                                        req->reason_code, cookie,
2834                                        !req->local_state_change);
2835         if (assoc_bss)
2836                 sta_info_flush(sdata->local, sdata);
2837
2838         mutex_lock(&sdata->local->mtx);
2839         ieee80211_recalc_idle(sdata->local);
2840         mutex_unlock(&sdata->local->mtx);
2841
2842         return 0;
2843 }
2844
2845 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
2846                            struct cfg80211_disassoc_request *req,
2847                            void *cookie)
2848 {
2849         struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2850         u8 bssid[ETH_ALEN];
2851
2852         mutex_lock(&ifmgd->mtx);
2853
2854         /*
2855          * cfg80211 should catch this ... but it's racy since
2856          * we can receive a disassoc frame, process it, hand it
2857          * to cfg80211 while that's in a locked section already
2858          * trying to tell us that the user wants to disconnect.
2859          */
2860         if (ifmgd->associated != req->bss) {
2861                 mutex_unlock(&ifmgd->mtx);
2862                 return -ENOLINK;
2863         }
2864
2865         printk(KERN_DEBUG "%s: disassociating from %pM by local choice (reason=%d)\n",
2866                sdata->name, req->bss->bssid, req->reason_code);
2867
2868         memcpy(bssid, req->bss->bssid, ETH_ALEN);
2869         ieee80211_set_disassoc(sdata, false, true);
2870
2871         mutex_unlock(&ifmgd->mtx);
2872
2873         ieee80211_send_deauth_disassoc(sdata, req->bss->bssid,
2874                         IEEE80211_STYPE_DISASSOC, req->reason_code,
2875                         cookie, !req->local_state_change);
2876         sta_info_flush(sdata->local, sdata);
2877
2878         mutex_lock(&sdata->local->mtx);
2879         ieee80211_recalc_idle(sdata->local);
2880         mutex_unlock(&sdata->local->mtx);
2881
2882         return 0;
2883 }
2884
2885 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
2886                                enum nl80211_cqm_rssi_threshold_event rssi_event,
2887                                gfp_t gfp)
2888 {
2889         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2890
2891         trace_api_cqm_rssi_notify(sdata, rssi_event);
2892
2893         cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, gfp);
2894 }
2895 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
2896
2897 unsigned char ieee80211_get_operstate(struct ieee80211_vif *vif)
2898 {
2899         struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2900         return sdata->dev->operstate;
2901 }
2902 EXPORT_SYMBOL(ieee80211_get_operstate);