2 * BSS client mode implementation
3 * Copyright 2003-2008, Jouni Malinen <j@w1.fi>
4 * Copyright 2004, Instant802 Networks, Inc.
5 * Copyright 2005, Devicescape Software, Inc.
6 * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz>
7 * Copyright 2007, Michael Wu <flamingice@sourmilk.net>
8 * Copyright 2013-2014 Intel Mobile Communications GmbH
9 * Copyright (C) 2015 - 2017 Intel Deutschland GmbH
10 * Copyright (C) 2018 Intel Corporation
12 * This program is free software; you can redistribute it and/or modify
13 * it under the terms of the GNU General Public License version 2 as
14 * published by the Free Software Foundation.
17 #include <linux/delay.h>
18 #include <linux/if_ether.h>
19 #include <linux/skbuff.h>
20 #include <linux/if_arp.h>
21 #include <linux/etherdevice.h>
22 #include <linux/moduleparam.h>
23 #include <linux/rtnetlink.h>
24 #include <linux/crc32.h>
25 #include <linux/slab.h>
26 #include <linux/export.h>
27 #include <net/mac80211.h>
28 #include <asm/unaligned.h>
30 #include "ieee80211_i.h"
31 #include "driver-ops.h"
34 #include "fils_aead.h"
36 #define IEEE80211_AUTH_TIMEOUT (HZ / 5)
37 #define IEEE80211_AUTH_TIMEOUT_LONG (HZ / 2)
38 #define IEEE80211_AUTH_TIMEOUT_SHORT (HZ / 10)
39 #define IEEE80211_AUTH_TIMEOUT_SAE (HZ * 2)
40 #define IEEE80211_AUTH_MAX_TRIES 3
41 #define IEEE80211_AUTH_WAIT_ASSOC (HZ * 5)
42 #define IEEE80211_ASSOC_TIMEOUT (HZ / 5)
43 #define IEEE80211_ASSOC_TIMEOUT_LONG (HZ / 2)
44 #define IEEE80211_ASSOC_TIMEOUT_SHORT (HZ / 10)
45 #define IEEE80211_ASSOC_MAX_TRIES 3
47 static int max_nullfunc_tries = 2;
48 module_param(max_nullfunc_tries, int, 0644);
49 MODULE_PARM_DESC(max_nullfunc_tries,
50 "Maximum nullfunc tx tries before disconnecting (reason 4).");
52 static int max_probe_tries = 5;
53 module_param(max_probe_tries, int, 0644);
54 MODULE_PARM_DESC(max_probe_tries,
55 "Maximum probe tries before disconnecting (reason 4).");
58 * Beacon loss timeout is calculated as N frames times the
59 * advertised beacon interval. This may need to be somewhat
60 * higher than what hardware might detect to account for
61 * delays in the host processing frames. But since we also
62 * probe on beacon miss before declaring the connection lost
63 * default to what we want.
65 static int beacon_loss_count = 7;
66 module_param(beacon_loss_count, int, 0644);
67 MODULE_PARM_DESC(beacon_loss_count,
68 "Number of beacon intervals before we decide beacon was lost.");
71 * Time the connection can be idle before we probe
72 * it to see if we can still talk to the AP.
74 #define IEEE80211_CONNECTION_IDLE_TIME (30 * HZ)
76 * Time we wait for a probe response after sending
77 * a probe request because of beacon loss or for
78 * checking the connection still works.
80 static int probe_wait_ms = 500;
81 module_param(probe_wait_ms, int, 0644);
82 MODULE_PARM_DESC(probe_wait_ms,
83 "Maximum time(ms) to wait for probe response"
84 " before disconnecting (reason 4).");
87 * How many Beacon frames need to have been used in average signal strength
88 * before starting to indicate signal change events.
90 #define IEEE80211_SIGNAL_AVE_MIN_COUNT 4
93 * We can have multiple work items (and connection probing)
94 * scheduling this timer, but we need to take care to only
95 * reschedule it when it should fire _earlier_ than it was
96 * asked for before, or if it's not pending right now. This
97 * function ensures that. Note that it then is required to
98 * run this function for all timeouts after the first one
99 * has happened -- the work that runs from this timer will
102 static void run_again(struct ieee80211_sub_if_data *sdata,
103 unsigned long timeout)
105 sdata_assert_lock(sdata);
107 if (!timer_pending(&sdata->u.mgd.timer) ||
108 time_before(timeout, sdata->u.mgd.timer.expires))
109 mod_timer(&sdata->u.mgd.timer, timeout);
112 void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata)
114 if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER)
117 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
120 mod_timer(&sdata->u.mgd.bcn_mon_timer,
121 round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout));
124 void ieee80211_sta_reset_conn_monitor(struct ieee80211_sub_if_data *sdata)
126 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
128 if (unlikely(!ifmgd->associated))
131 if (ifmgd->probe_send_count)
132 ifmgd->probe_send_count = 0;
134 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
137 mod_timer(&ifmgd->conn_mon_timer,
138 round_jiffies_up(jiffies + IEEE80211_CONNECTION_IDLE_TIME));
141 static int ecw2cw(int ecw)
143 return (1 << ecw) - 1;
147 ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata,
148 struct ieee80211_supported_band *sband,
149 struct ieee80211_channel *channel,
150 const struct ieee80211_ht_operation *ht_oper,
151 const struct ieee80211_vht_operation *vht_oper,
152 const struct ieee80211_he_operation *he_oper,
153 struct cfg80211_chan_def *chandef, bool tracking)
155 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
156 struct cfg80211_chan_def vht_chandef;
157 struct ieee80211_sta_ht_cap sta_ht_cap;
160 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
161 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
163 chandef->chan = channel;
164 chandef->width = NL80211_CHAN_WIDTH_20_NOHT;
165 chandef->center_freq1 = channel->center_freq;
166 chandef->center_freq2 = 0;
168 if (!ht_oper || !sta_ht_cap.ht_supported) {
169 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
173 chandef->width = NL80211_CHAN_WIDTH_20;
175 ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan,
177 /* check that channel matches the right operating channel */
178 if (!tracking && channel->center_freq != ht_cfreq) {
180 * It's possible that some APs are confused here;
181 * Netgear WNDR3700 sometimes reports 4 higher than
182 * the actual channel in association responses, but
183 * since we look at probe response/beacon data here
187 "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n",
188 channel->center_freq, ht_cfreq,
189 ht_oper->primary_chan, channel->band);
190 ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT;
194 /* check 40 MHz support, if we have it */
195 if (sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
196 ieee80211_chandef_ht_oper(ht_oper, chandef);
198 /* 40 MHz (and 80 MHz) must be supported for VHT */
199 ret = IEEE80211_STA_DISABLE_VHT;
200 /* also mark 40 MHz disabled */
201 ret |= IEEE80211_STA_DISABLE_40MHZ;
205 if (!vht_oper || !sband->vht_cap.vht_supported) {
206 ret = IEEE80211_STA_DISABLE_VHT;
210 vht_chandef = *chandef;
211 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) && he_oper &&
212 (le32_to_cpu(he_oper->he_oper_params) &
213 IEEE80211_HE_OPERATION_VHT_OPER_INFO)) {
214 struct ieee80211_vht_operation he_oper_vht_cap;
217 * Set only first 3 bytes (other 2 aren't used in
218 * ieee80211_chandef_vht_oper() anyway)
220 memcpy(&he_oper_vht_cap, he_oper->optional, 3);
221 he_oper_vht_cap.basic_mcs_set = cpu_to_le16(0);
223 if (!ieee80211_chandef_vht_oper(&sdata->local->hw,
224 &he_oper_vht_cap, ht_oper,
226 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
228 "HE AP VHT information is invalid, disable HE\n");
229 ret = IEEE80211_STA_DISABLE_HE;
232 } else if (!ieee80211_chandef_vht_oper(&sdata->local->hw, vht_oper,
233 ht_oper, &vht_chandef)) {
234 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
236 "AP VHT information is invalid, disable VHT\n");
237 ret = IEEE80211_STA_DISABLE_VHT;
241 if (!cfg80211_chandef_valid(&vht_chandef)) {
242 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
244 "AP VHT information is invalid, disable VHT\n");
245 ret = IEEE80211_STA_DISABLE_VHT;
249 if (cfg80211_chandef_identical(chandef, &vht_chandef)) {
254 if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) {
255 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
257 "AP VHT information doesn't match HT, disable VHT\n");
258 ret = IEEE80211_STA_DISABLE_VHT;
262 *chandef = vht_chandef;
268 * When tracking the current AP, don't do any further checks if the
269 * new chandef is identical to the one we're currently using for the
270 * connection. This keeps us from playing ping-pong with regulatory,
271 * without it the following can happen (for example):
272 * - connect to an AP with 80 MHz, world regdom allows 80 MHz
273 * - AP advertises regdom US
274 * - CRDA loads regdom US with 80 MHz prohibited (old database)
275 * - the code below detects an unsupported channel, downgrades, and
276 * we disconnect from the AP in the caller
277 * - disconnect causes CRDA to reload world regdomain and the game
279 * (see https://bugzilla.kernel.org/show_bug.cgi?id=70881)
281 * It seems possible that there are still scenarios with CSA or real
282 * bandwidth changes where a this could happen, but those cases are
283 * less common and wouldn't completely prevent using the AP.
286 cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef))
289 /* don't print the message below for VHT mismatch if VHT is disabled */
290 if (ret & IEEE80211_STA_DISABLE_VHT)
291 vht_chandef = *chandef;
294 * Ignore the DISABLED flag when we're already connected and only
295 * tracking the APs beacon for bandwidth changes - otherwise we
296 * might get disconnected here if we connect to an AP, update our
297 * regulatory information based on the AP's country IE and the
298 * information we have is wrong/outdated and disables the channel
299 * that we're actually using for the connection to the AP.
301 while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef,
303 IEEE80211_CHAN_DISABLED)) {
304 if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) {
305 ret = IEEE80211_STA_DISABLE_HT |
306 IEEE80211_STA_DISABLE_VHT;
310 ret |= ieee80211_chandef_downgrade(chandef);
313 if (chandef->width != vht_chandef.width && !tracking)
315 "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n");
317 WARN_ON_ONCE(!cfg80211_chandef_valid(chandef));
321 static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata,
322 struct sta_info *sta,
323 const struct ieee80211_ht_cap *ht_cap,
324 const struct ieee80211_ht_operation *ht_oper,
325 const struct ieee80211_vht_operation *vht_oper,
326 const struct ieee80211_he_operation *he_oper,
327 const u8 *bssid, u32 *changed)
329 struct ieee80211_local *local = sdata->local;
330 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
331 struct ieee80211_channel *chan = sdata->vif.bss_conf.chandef.chan;
332 struct ieee80211_supported_band *sband =
333 local->hw.wiphy->bands[chan->band];
334 struct cfg80211_chan_def chandef;
337 enum ieee80211_sta_rx_bandwidth new_sta_bw;
340 /* if HT was/is disabled, don't track any bandwidth changes */
341 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper)
344 /* don't check VHT if we associated as non-VHT station */
345 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
348 /* don't check HE if we associated as non-HE station */
349 if (ifmgd->flags & IEEE80211_STA_DISABLE_HE ||
350 !ieee80211_get_he_sta_cap(sband))
353 if (WARN_ON_ONCE(!sta))
357 * if bss configuration changed store the new one -
358 * this may be applicable even if channel is identical
360 ht_opmode = le16_to_cpu(ht_oper->operation_mode);
361 if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) {
362 *changed |= BSS_CHANGED_HT;
363 sdata->vif.bss_conf.ht_operation_mode = ht_opmode;
366 /* calculate new channel (type) based on HT/VHT/HE operation IEs */
367 flags = ieee80211_determine_chantype(sdata, sband, chan,
368 ht_oper, vht_oper, he_oper,
372 * Downgrade the new channel if we associated with restricted
373 * capabilities. For example, if we associated as a 20 MHz STA
374 * to a 40 MHz AP (due to regulatory, capabilities or config
375 * reasons) then switching to a 40 MHz channel now won't do us
376 * any good -- we couldn't use it with the AP.
378 if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ &&
379 chandef.width == NL80211_CHAN_WIDTH_80P80)
380 flags |= ieee80211_chandef_downgrade(&chandef);
381 if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ &&
382 chandef.width == NL80211_CHAN_WIDTH_160)
383 flags |= ieee80211_chandef_downgrade(&chandef);
384 if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ &&
385 chandef.width > NL80211_CHAN_WIDTH_20)
386 flags |= ieee80211_chandef_downgrade(&chandef);
388 if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef))
392 "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n",
393 ifmgd->bssid, chandef.chan->center_freq, chandef.width,
394 chandef.center_freq1, chandef.center_freq2);
396 if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT |
397 IEEE80211_STA_DISABLE_VHT |
398 IEEE80211_STA_DISABLE_40MHZ |
399 IEEE80211_STA_DISABLE_80P80MHZ |
400 IEEE80211_STA_DISABLE_160MHZ)) ||
401 !cfg80211_chandef_valid(&chandef)) {
403 "AP %pM changed bandwidth in a way we can't support - disconnect\n",
408 switch (chandef.width) {
409 case NL80211_CHAN_WIDTH_20_NOHT:
410 case NL80211_CHAN_WIDTH_20:
411 new_sta_bw = IEEE80211_STA_RX_BW_20;
413 case NL80211_CHAN_WIDTH_40:
414 new_sta_bw = IEEE80211_STA_RX_BW_40;
416 case NL80211_CHAN_WIDTH_80:
417 new_sta_bw = IEEE80211_STA_RX_BW_80;
419 case NL80211_CHAN_WIDTH_80P80:
420 case NL80211_CHAN_WIDTH_160:
421 new_sta_bw = IEEE80211_STA_RX_BW_160;
427 if (new_sta_bw > sta->cur_max_bandwidth)
428 new_sta_bw = sta->cur_max_bandwidth;
430 if (new_sta_bw < sta->sta.bandwidth) {
431 sta->sta.bandwidth = new_sta_bw;
432 rate_control_rate_update(local, sband, sta,
433 IEEE80211_RC_BW_CHANGED);
436 ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed);
439 "AP %pM changed bandwidth to incompatible one - disconnect\n",
444 if (new_sta_bw > sta->sta.bandwidth) {
445 sta->sta.bandwidth = new_sta_bw;
446 rate_control_rate_update(local, sband, sta,
447 IEEE80211_RC_BW_CHANGED);
453 /* frame sending functions */
455 static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata,
456 struct sk_buff *skb, u8 ap_ht_param,
457 struct ieee80211_supported_band *sband,
458 struct ieee80211_channel *channel,
459 enum ieee80211_smps_mode smps)
462 u32 flags = channel->flags;
464 struct ieee80211_sta_ht_cap ht_cap;
466 BUILD_BUG_ON(sizeof(ht_cap) != sizeof(sband->ht_cap));
468 memcpy(&ht_cap, &sband->ht_cap, sizeof(ht_cap));
469 ieee80211_apply_htcap_overrides(sdata, &ht_cap);
471 /* determine capability flags */
474 switch (ap_ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) {
475 case IEEE80211_HT_PARAM_CHA_SEC_ABOVE:
476 if (flags & IEEE80211_CHAN_NO_HT40PLUS) {
477 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
478 cap &= ~IEEE80211_HT_CAP_SGI_40;
481 case IEEE80211_HT_PARAM_CHA_SEC_BELOW:
482 if (flags & IEEE80211_CHAN_NO_HT40MINUS) {
483 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
484 cap &= ~IEEE80211_HT_CAP_SGI_40;
490 * If 40 MHz was disabled associate as though we weren't
491 * capable of 40 MHz -- some broken APs will never fall
492 * back to trying to transmit in 20 MHz.
494 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_40MHZ) {
495 cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40;
496 cap &= ~IEEE80211_HT_CAP_SGI_40;
499 /* set SM PS mode properly */
500 cap &= ~IEEE80211_HT_CAP_SM_PS;
502 case IEEE80211_SMPS_AUTOMATIC:
503 case IEEE80211_SMPS_NUM_MODES:
506 case IEEE80211_SMPS_OFF:
507 cap |= WLAN_HT_CAP_SM_PS_DISABLED <<
508 IEEE80211_HT_CAP_SM_PS_SHIFT;
510 case IEEE80211_SMPS_STATIC:
511 cap |= WLAN_HT_CAP_SM_PS_STATIC <<
512 IEEE80211_HT_CAP_SM_PS_SHIFT;
514 case IEEE80211_SMPS_DYNAMIC:
515 cap |= WLAN_HT_CAP_SM_PS_DYNAMIC <<
516 IEEE80211_HT_CAP_SM_PS_SHIFT;
520 /* reserve and fill IE */
521 pos = skb_put(skb, sizeof(struct ieee80211_ht_cap) + 2);
522 ieee80211_ie_build_ht_cap(pos, &ht_cap, cap);
525 /* This function determines vht capability flags for the association
527 * Note - the function may set the owner of the MU-MIMO capability
529 static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata,
531 struct ieee80211_supported_band *sband,
532 struct ieee80211_vht_cap *ap_vht_cap)
534 struct ieee80211_local *local = sdata->local;
537 struct ieee80211_sta_vht_cap vht_cap;
538 u32 mask, ap_bf_sts, our_bf_sts;
540 BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap));
542 memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap));
543 ieee80211_apply_vhtcap_overrides(sdata, &vht_cap);
545 /* determine capability flags */
548 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_80P80MHZ) {
549 u32 bw = cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
551 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
552 if (bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ ||
553 bw == IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ)
554 cap |= IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ;
557 if (sdata->u.mgd.flags & IEEE80211_STA_DISABLE_160MHZ) {
558 cap &= ~IEEE80211_VHT_CAP_SHORT_GI_160;
559 cap &= ~IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK;
563 * Some APs apparently get confused if our capabilities are better
564 * than theirs, so restrict what we advertise in the assoc request.
566 if (!(ap_vht_cap->vht_cap_info &
567 cpu_to_le32(IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE)))
568 cap &= ~(IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
569 IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE);
570 else if (!(ap_vht_cap->vht_cap_info &
571 cpu_to_le32(IEEE80211_VHT_CAP_MU_BEAMFORMER_CAPABLE)))
572 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
575 * If some other vif is using the MU-MIMO capablity we cannot associate
576 * using MU-MIMO - this will lead to contradictions in the group-id
578 * Ownership is defined since association request, in order to avoid
579 * simultaneous associations with MU-MIMO.
581 if (cap & IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE) {
582 bool disable_mu_mimo = false;
583 struct ieee80211_sub_if_data *other;
585 list_for_each_entry_rcu(other, &local->interfaces, list) {
586 if (other->vif.mu_mimo_owner) {
587 disable_mu_mimo = true;
592 cap &= ~IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE;
594 sdata->vif.mu_mimo_owner = true;
597 mask = IEEE80211_VHT_CAP_BEAMFORMEE_STS_MASK;
599 ap_bf_sts = le32_to_cpu(ap_vht_cap->vht_cap_info) & mask;
600 our_bf_sts = cap & mask;
602 if (ap_bf_sts < our_bf_sts) {
607 /* reserve and fill IE */
608 pos = skb_put(skb, sizeof(struct ieee80211_vht_cap) + 2);
609 ieee80211_ie_build_vht_cap(pos, &vht_cap, cap);
612 /* This function determines HE capability flags for the association
615 static void ieee80211_add_he_ie(struct ieee80211_sub_if_data *sdata,
617 struct ieee80211_supported_band *sband)
620 const struct ieee80211_sta_he_cap *he_cap = NULL;
623 he_cap = ieee80211_get_he_sta_cap(sband);
628 * TODO: the 1 added is because this temporarily is under the EXTENSION
629 * IE. Get rid of it when it moves.
632 2 + 1 + sizeof(he_cap->he_cap_elem) +
633 ieee80211_he_mcs_nss_size(&he_cap->he_cap_elem) +
634 ieee80211_he_ppe_size(he_cap->ppe_thres[0],
635 he_cap->he_cap_elem.phy_cap_info);
636 pos = skb_put(skb, he_cap_size);
637 ieee80211_ie_build_he_cap(pos, he_cap, pos + he_cap_size);
640 static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
642 struct ieee80211_local *local = sdata->local;
643 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
644 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
646 struct ieee80211_mgmt *mgmt;
648 size_t offset = 0, noffset;
649 int i, count, rates_len, supp_rates_len, shift;
651 struct ieee80211_supported_band *sband;
652 struct ieee80211_chanctx_conf *chanctx_conf;
653 struct ieee80211_channel *chan;
656 sdata_assert_lock(sdata);
659 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
660 if (WARN_ON(!chanctx_conf)) {
664 chan = chanctx_conf->def.chan;
666 sband = local->hw.wiphy->bands[chan->band];
667 shift = ieee80211_vif_get_shift(&sdata->vif);
669 if (assoc_data->supp_rates_len) {
671 * Get all rates supported by the device and the AP as
672 * some APs don't like getting a superset of their rates
673 * in the association request (e.g. D-Link DAP 1353 in
676 rates_len = ieee80211_parse_bitrates(&chanctx_conf->def, sband,
677 assoc_data->supp_rates,
678 assoc_data->supp_rates_len,
682 * In case AP not provide any supported rates information
683 * before association, we send information element(s) with
684 * all rates that we support.
687 for (i = 0; i < sband->n_bitrates; i++) {
693 skb = alloc_skb(local->hw.extra_tx_headroom +
694 sizeof(*mgmt) + /* bit too much but doesn't matter */
695 2 + assoc_data->ssid_len + /* SSID */
696 4 + rates_len + /* (extended) rates */
697 4 + /* power capability */
698 2 + 2 * sband->n_channels + /* supported channels */
699 2 + sizeof(struct ieee80211_ht_cap) + /* HT */
700 2 + sizeof(struct ieee80211_vht_cap) + /* VHT */
701 2 + 1 + sizeof(struct ieee80211_he_cap_elem) + /* HE */
702 sizeof(struct ieee80211_he_mcs_nss_supp) +
703 IEEE80211_HE_PPE_THRES_MAX_LEN +
704 assoc_data->ie_len + /* extra IEs */
705 (assoc_data->fils_kek_len ? 16 /* AES-SIV */ : 0) +
711 skb_reserve(skb, local->hw.extra_tx_headroom);
713 capab = WLAN_CAPABILITY_ESS;
715 if (sband->band == NL80211_BAND_2GHZ) {
716 capab |= WLAN_CAPABILITY_SHORT_SLOT_TIME;
717 capab |= WLAN_CAPABILITY_SHORT_PREAMBLE;
720 if (assoc_data->capability & WLAN_CAPABILITY_PRIVACY)
721 capab |= WLAN_CAPABILITY_PRIVACY;
723 if ((assoc_data->capability & WLAN_CAPABILITY_SPECTRUM_MGMT) &&
724 ieee80211_hw_check(&local->hw, SPECTRUM_MGMT))
725 capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
727 if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
728 capab |= WLAN_CAPABILITY_RADIO_MEASURE;
730 mgmt = skb_put_zero(skb, 24);
731 memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
732 memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN);
733 memcpy(mgmt->bssid, assoc_data->bss->bssid, ETH_ALEN);
735 if (!is_zero_ether_addr(assoc_data->prev_bssid)) {
737 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
738 IEEE80211_STYPE_REASSOC_REQ);
739 mgmt->u.reassoc_req.capab_info = cpu_to_le16(capab);
740 mgmt->u.reassoc_req.listen_interval =
741 cpu_to_le16(local->hw.conf.listen_interval);
742 memcpy(mgmt->u.reassoc_req.current_ap, assoc_data->prev_bssid,
746 mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT |
747 IEEE80211_STYPE_ASSOC_REQ);
748 mgmt->u.assoc_req.capab_info = cpu_to_le16(capab);
749 mgmt->u.assoc_req.listen_interval =
750 cpu_to_le16(local->hw.conf.listen_interval);
754 pos = skb_put(skb, 2 + assoc_data->ssid_len);
755 *pos++ = WLAN_EID_SSID;
756 *pos++ = assoc_data->ssid_len;
757 memcpy(pos, assoc_data->ssid, assoc_data->ssid_len);
759 /* add all rates which were marked to be used above */
760 supp_rates_len = rates_len;
761 if (supp_rates_len > 8)
764 pos = skb_put(skb, supp_rates_len + 2);
765 *pos++ = WLAN_EID_SUPP_RATES;
766 *pos++ = supp_rates_len;
769 for (i = 0; i < sband->n_bitrates; i++) {
770 if (BIT(i) & rates) {
771 int rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
779 if (rates_len > count) {
780 pos = skb_put(skb, rates_len - count + 2);
781 *pos++ = WLAN_EID_EXT_SUPP_RATES;
782 *pos++ = rates_len - count;
784 for (i++; i < sband->n_bitrates; i++) {
785 if (BIT(i) & rates) {
787 rate = DIV_ROUND_UP(sband->bitrates[i].bitrate,
794 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
795 capab & WLAN_CAPABILITY_RADIO_MEASURE) {
796 pos = skb_put(skb, 4);
797 *pos++ = WLAN_EID_PWR_CAPABILITY;
799 *pos++ = 0; /* min tx power */
801 *pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
804 if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
805 /* TODO: get this in reg domain format */
806 pos = skb_put(skb, 2 * sband->n_channels + 2);
807 *pos++ = WLAN_EID_SUPPORTED_CHANNELS;
808 *pos++ = 2 * sband->n_channels;
809 for (i = 0; i < sband->n_channels; i++) {
810 *pos++ = ieee80211_frequency_to_channel(
811 sband->channels[i].center_freq);
812 *pos++ = 1; /* one channel in the subband*/
816 /* if present, add any custom IEs that go before HT */
817 if (assoc_data->ie_len) {
818 static const u8 before_ht[] = {
821 WLAN_EID_EXT_SUPP_RATES,
822 WLAN_EID_PWR_CAPABILITY,
823 WLAN_EID_SUPPORTED_CHANNELS,
826 WLAN_EID_RRM_ENABLED_CAPABILITIES,
827 WLAN_EID_MOBILITY_DOMAIN,
828 WLAN_EID_FAST_BSS_TRANSITION, /* reassoc only */
829 WLAN_EID_RIC_DATA, /* reassoc only */
830 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
832 static const u8 after_ric[] = {
833 WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
834 WLAN_EID_HT_CAPABILITY,
835 WLAN_EID_BSS_COEX_2040,
836 /* luckily this is almost always there */
837 WLAN_EID_EXT_CAPABILITY,
838 WLAN_EID_QOS_TRAFFIC_CAPA,
839 WLAN_EID_TIM_BCAST_REQ,
840 WLAN_EID_INTERWORKING,
841 /* 60 GHz (Multi-band, DMG, MMS) can't happen */
842 WLAN_EID_VHT_CAPABILITY,
843 WLAN_EID_OPMODE_NOTIF,
846 noffset = ieee80211_ie_split_ric(assoc_data->ie,
849 ARRAY_SIZE(before_ht),
851 ARRAY_SIZE(after_ric),
853 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
857 if (WARN_ON_ONCE((ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
858 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)))
859 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
861 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
862 ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param,
863 sband, chan, sdata->smps_mode);
865 /* if present, add any custom IEs that go before VHT */
866 if (assoc_data->ie_len) {
867 static const u8 before_vht[] = {
869 * no need to list the ones split off before HT
872 WLAN_EID_BSS_COEX_2040,
873 WLAN_EID_EXT_CAPABILITY,
874 WLAN_EID_QOS_TRAFFIC_CAPA,
875 WLAN_EID_TIM_BCAST_REQ,
876 WLAN_EID_INTERWORKING,
877 /* 60 GHz (Multi-band, DMG, MMS) can't happen */
880 /* RIC already taken above, so no need to handle here anymore */
881 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
882 before_vht, ARRAY_SIZE(before_vht),
884 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
888 /* if present, add any custom IEs that go before HE */
889 if (assoc_data->ie_len) {
890 static const u8 before_he[] = {
892 * no need to list the ones split off before VHT
895 WLAN_EID_OPMODE_NOTIF,
896 WLAN_EID_EXTENSION, WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE,
898 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_SESSION,
899 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_PUBLIC_KEY,
900 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_KEY_CONFIRM,
901 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_HLP_CONTAINER,
902 WLAN_EID_EXTENSION, WLAN_EID_EXT_FILS_IP_ADDR_ASSIGN,
903 /* TODO: add 11ah/11aj/11ak elements */
906 /* RIC already taken above, so no need to handle here anymore */
907 noffset = ieee80211_ie_split(assoc_data->ie, assoc_data->ie_len,
908 before_he, ARRAY_SIZE(before_he),
910 pos = skb_put(skb, noffset - offset);
911 memcpy(pos, assoc_data->ie + offset, noffset - offset);
915 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
916 ieee80211_add_vht_ie(sdata, skb, sband,
917 &assoc_data->ap_vht_cap);
919 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
920 ieee80211_add_he_ie(sdata, skb, sband);
922 /* if present, add any custom non-vendor IEs that go after HE */
923 if (assoc_data->ie_len) {
924 noffset = ieee80211_ie_split_vendor(assoc_data->ie,
927 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
931 if (assoc_data->wmm) {
932 if (assoc_data->uapsd) {
933 qos_info = ifmgd->uapsd_queues;
934 qos_info |= (ifmgd->uapsd_max_sp_len <<
935 IEEE80211_WMM_IE_STA_QOSINFO_SP_SHIFT);
940 pos = ieee80211_add_wmm_info_ie(skb_put(skb, 9), qos_info);
943 /* add any remaining custom (i.e. vendor specific here) IEs */
944 if (assoc_data->ie_len) {
945 noffset = assoc_data->ie_len;
946 skb_put_data(skb, assoc_data->ie + offset, noffset - offset);
949 if (assoc_data->fils_kek_len &&
950 fils_encrypt_assoc_req(skb, assoc_data) < 0) {
955 drv_mgd_prepare_tx(local, sdata, 0);
957 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
958 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
959 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS |
960 IEEE80211_TX_INTFL_MLME_CONN_TX;
961 ieee80211_tx_skb(sdata, skb);
964 void ieee80211_send_pspoll(struct ieee80211_local *local,
965 struct ieee80211_sub_if_data *sdata)
967 struct ieee80211_pspoll *pspoll;
970 skb = ieee80211_pspoll_get(&local->hw, &sdata->vif);
974 pspoll = (struct ieee80211_pspoll *) skb->data;
975 pspoll->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
977 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
978 ieee80211_tx_skb(sdata, skb);
981 void ieee80211_send_nullfunc(struct ieee80211_local *local,
982 struct ieee80211_sub_if_data *sdata,
986 struct ieee80211_hdr_3addr *nullfunc;
987 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
989 /* Don't send NDPs when STA is connected HE */
990 if (sdata->vif.type == NL80211_IFTYPE_STATION &&
991 !(ifmgd->flags & IEEE80211_STA_DISABLE_HE))
994 skb = ieee80211_nullfunc_get(&local->hw, &sdata->vif,
995 !ieee80211_hw_check(&local->hw, DOESNT_SUPPORT_QOS_NDP));
999 nullfunc = (struct ieee80211_hdr_3addr *) skb->data;
1001 nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM);
1003 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT |
1004 IEEE80211_TX_INTFL_OFFCHAN_TX_OK;
1006 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1007 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS;
1009 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
1010 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE;
1012 ieee80211_tx_skb(sdata, skb);
1015 static void ieee80211_send_4addr_nullfunc(struct ieee80211_local *local,
1016 struct ieee80211_sub_if_data *sdata)
1018 struct sk_buff *skb;
1019 struct ieee80211_hdr *nullfunc;
1022 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
1025 /* Don't send NDPs when connected HE */
1026 if (!(sdata->u.mgd.flags & IEEE80211_STA_DISABLE_HE))
1029 skb = dev_alloc_skb(local->hw.extra_tx_headroom + 30);
1033 skb_reserve(skb, local->hw.extra_tx_headroom);
1035 nullfunc = skb_put_zero(skb, 30);
1036 fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_NULLFUNC |
1037 IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS);
1038 nullfunc->frame_control = fc;
1039 memcpy(nullfunc->addr1, sdata->u.mgd.bssid, ETH_ALEN);
1040 memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN);
1041 memcpy(nullfunc->addr3, sdata->u.mgd.bssid, ETH_ALEN);
1042 memcpy(nullfunc->addr4, sdata->vif.addr, ETH_ALEN);
1044 IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
1045 ieee80211_tx_skb(sdata, skb);
1048 /* spectrum management related things */
1049 static void ieee80211_chswitch_work(struct work_struct *work)
1051 struct ieee80211_sub_if_data *sdata =
1052 container_of(work, struct ieee80211_sub_if_data, u.mgd.chswitch_work);
1053 struct ieee80211_local *local = sdata->local;
1054 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1057 if (!ieee80211_sdata_running(sdata))
1061 mutex_lock(&local->mtx);
1062 mutex_lock(&local->chanctx_mtx);
1064 if (!ifmgd->associated)
1067 if (!sdata->vif.csa_active)
1071 * using reservation isn't immediate as it may be deferred until later
1072 * with multi-vif. once reservation is complete it will re-schedule the
1073 * work with no reserved_chanctx so verify chandef to check if it
1074 * completed successfully
1077 if (sdata->reserved_chanctx) {
1078 struct ieee80211_supported_band *sband = NULL;
1079 struct sta_info *mgd_sta = NULL;
1080 enum ieee80211_sta_rx_bandwidth bw = IEEE80211_STA_RX_BW_20;
1083 * with multi-vif csa driver may call ieee80211_csa_finish()
1084 * many times while waiting for other interfaces to use their
1087 if (sdata->reserved_ready)
1090 if (sdata->vif.bss_conf.chandef.width !=
1091 sdata->csa_chandef.width) {
1093 * For managed interface, we need to also update the AP
1094 * station bandwidth and align the rate scale algorithm
1095 * on the bandwidth change. Here we only consider the
1096 * bandwidth of the new channel definition (as channel
1097 * switch flow does not have the full HT/VHT/HE
1098 * information), assuming that if additional changes are
1099 * required they would be done as part of the processing
1100 * of the next beacon from the AP.
1102 switch (sdata->csa_chandef.width) {
1103 case NL80211_CHAN_WIDTH_20_NOHT:
1104 case NL80211_CHAN_WIDTH_20:
1106 bw = IEEE80211_STA_RX_BW_20;
1108 case NL80211_CHAN_WIDTH_40:
1109 bw = IEEE80211_STA_RX_BW_40;
1111 case NL80211_CHAN_WIDTH_80:
1112 bw = IEEE80211_STA_RX_BW_80;
1114 case NL80211_CHAN_WIDTH_80P80:
1115 case NL80211_CHAN_WIDTH_160:
1116 bw = IEEE80211_STA_RX_BW_160;
1120 mgd_sta = sta_info_get(sdata, ifmgd->bssid);
1122 local->hw.wiphy->bands[sdata->csa_chandef.chan->band];
1125 if (sdata->vif.bss_conf.chandef.width >
1126 sdata->csa_chandef.width) {
1127 mgd_sta->sta.bandwidth = bw;
1128 rate_control_rate_update(local, sband, mgd_sta,
1129 IEEE80211_RC_BW_CHANGED);
1132 ret = ieee80211_vif_use_reserved_context(sdata);
1135 "failed to use reserved channel context, disconnecting (err=%d)\n",
1137 ieee80211_queue_work(&sdata->local->hw,
1138 &ifmgd->csa_connection_drop_work);
1142 if (sdata->vif.bss_conf.chandef.width <
1143 sdata->csa_chandef.width) {
1144 mgd_sta->sta.bandwidth = bw;
1145 rate_control_rate_update(local, sband, mgd_sta,
1146 IEEE80211_RC_BW_CHANGED);
1152 if (!cfg80211_chandef_identical(&sdata->vif.bss_conf.chandef,
1153 &sdata->csa_chandef)) {
1155 "failed to finalize channel switch, disconnecting\n");
1156 ieee80211_queue_work(&sdata->local->hw,
1157 &ifmgd->csa_connection_drop_work);
1161 /* XXX: shouldn't really modify cfg80211-owned data! */
1162 ifmgd->associated->channel = sdata->csa_chandef.chan;
1164 ifmgd->csa_waiting_bcn = true;
1166 ieee80211_sta_reset_beacon_monitor(sdata);
1167 ieee80211_sta_reset_conn_monitor(sdata);
1170 mutex_unlock(&local->chanctx_mtx);
1171 mutex_unlock(&local->mtx);
1172 sdata_unlock(sdata);
1175 static void ieee80211_chswitch_post_beacon(struct ieee80211_sub_if_data *sdata)
1177 struct ieee80211_local *local = sdata->local;
1178 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1181 sdata_assert_lock(sdata);
1183 WARN_ON(!sdata->vif.csa_active);
1185 if (sdata->csa_block_tx) {
1186 ieee80211_wake_vif_queues(local, sdata,
1187 IEEE80211_QUEUE_STOP_REASON_CSA);
1188 sdata->csa_block_tx = false;
1191 sdata->vif.csa_active = false;
1192 ifmgd->csa_waiting_bcn = false;
1194 ret = drv_post_channel_switch(sdata);
1197 "driver post channel switch failed, disconnecting\n");
1198 ieee80211_queue_work(&local->hw,
1199 &ifmgd->csa_connection_drop_work);
1203 cfg80211_ch_switch_notify(sdata->dev, &sdata->reserved_chandef);
1206 void ieee80211_chswitch_done(struct ieee80211_vif *vif, bool success)
1208 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
1209 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1211 trace_api_chswitch_done(sdata, success);
1214 "driver channel switch failed, disconnecting\n");
1215 ieee80211_queue_work(&sdata->local->hw,
1216 &ifmgd->csa_connection_drop_work);
1218 ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work);
1221 EXPORT_SYMBOL(ieee80211_chswitch_done);
1223 static void ieee80211_chswitch_timer(struct timer_list *t)
1225 struct ieee80211_sub_if_data *sdata =
1226 from_timer(sdata, t, u.mgd.chswitch_timer);
1228 ieee80211_queue_work(&sdata->local->hw, &sdata->u.mgd.chswitch_work);
1232 ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata,
1233 u64 timestamp, u32 device_timestamp,
1234 struct ieee802_11_elems *elems,
1237 struct ieee80211_local *local = sdata->local;
1238 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1239 struct cfg80211_bss *cbss = ifmgd->associated;
1240 struct ieee80211_chanctx_conf *conf;
1241 struct ieee80211_chanctx *chanctx;
1242 enum nl80211_band current_band;
1243 struct ieee80211_csa_ie csa_ie;
1244 struct ieee80211_channel_switch ch_switch;
1247 sdata_assert_lock(sdata);
1252 if (local->scanning)
1255 /* disregard subsequent announcements if we are already processing */
1256 if (sdata->vif.csa_active)
1259 current_band = cbss->channel->band;
1260 res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
1262 ifmgd->associated->bssid, &csa_ie);
1264 ieee80211_queue_work(&local->hw,
1265 &ifmgd->csa_connection_drop_work);
1269 if (!cfg80211_chandef_usable(local->hw.wiphy, &csa_ie.chandef,
1270 IEEE80211_CHAN_DISABLED)) {
1272 "AP %pM switches to unsupported channel (%d MHz, width:%d, CF1/2: %d/%d MHz), disconnecting\n",
1273 ifmgd->associated->bssid,
1274 csa_ie.chandef.chan->center_freq,
1275 csa_ie.chandef.width, csa_ie.chandef.center_freq1,
1276 csa_ie.chandef.center_freq2);
1277 ieee80211_queue_work(&local->hw,
1278 &ifmgd->csa_connection_drop_work);
1282 if (cfg80211_chandef_identical(&csa_ie.chandef,
1283 &sdata->vif.bss_conf.chandef)) {
1284 if (ifmgd->csa_ignored_same_chan)
1287 "AP %pM tries to chanswitch to same channel, ignore\n",
1288 ifmgd->associated->bssid);
1289 ifmgd->csa_ignored_same_chan = true;
1294 * Drop all TDLS peers - either we disconnect or move to a different
1295 * channel from this point on. There's no telling what our peer will do.
1296 * The TDLS WIDER_BW scenario is also problematic, as peers might now
1297 * have an incompatible wider chandef.
1299 ieee80211_teardown_tdls_peers(sdata);
1301 mutex_lock(&local->mtx);
1302 mutex_lock(&local->chanctx_mtx);
1303 conf = rcu_dereference_protected(sdata->vif.chanctx_conf,
1304 lockdep_is_held(&local->chanctx_mtx));
1307 "no channel context assigned to vif?, disconnecting\n");
1308 goto drop_connection;
1311 chanctx = container_of(conf, struct ieee80211_chanctx, conf);
1313 if (local->use_chanctx &&
1314 !ieee80211_hw_check(&local->hw, CHANCTX_STA_CSA)) {
1316 "driver doesn't support chan-switch with channel contexts\n");
1317 goto drop_connection;
1320 ch_switch.timestamp = timestamp;
1321 ch_switch.device_timestamp = device_timestamp;
1322 ch_switch.block_tx = csa_ie.mode;
1323 ch_switch.chandef = csa_ie.chandef;
1324 ch_switch.count = csa_ie.count;
1326 if (drv_pre_channel_switch(sdata, &ch_switch)) {
1328 "preparing for channel switch failed, disconnecting\n");
1329 goto drop_connection;
1332 res = ieee80211_vif_reserve_chanctx(sdata, &csa_ie.chandef,
1333 chanctx->mode, false);
1336 "failed to reserve channel context for channel switch, disconnecting (err=%d)\n",
1338 goto drop_connection;
1340 mutex_unlock(&local->chanctx_mtx);
1342 sdata->vif.csa_active = true;
1343 sdata->csa_chandef = csa_ie.chandef;
1344 sdata->csa_block_tx = csa_ie.mode;
1345 ifmgd->csa_ignored_same_chan = false;
1347 if (sdata->csa_block_tx)
1348 ieee80211_stop_vif_queues(local, sdata,
1349 IEEE80211_QUEUE_STOP_REASON_CSA);
1350 mutex_unlock(&local->mtx);
1352 cfg80211_ch_switch_started_notify(sdata->dev, &csa_ie.chandef,
1355 if (local->ops->channel_switch) {
1356 /* use driver's channel switch callback */
1357 drv_channel_switch(local, sdata, &ch_switch);
1361 /* channel switch handled in software */
1362 if (csa_ie.count <= 1)
1363 ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
1365 mod_timer(&ifmgd->chswitch_timer,
1366 TU_TO_EXP_TIME((csa_ie.count - 1) *
1367 cbss->beacon_interval));
1371 * This is just so that the disconnect flow will know that
1372 * we were trying to switch channel and failed. In case the
1373 * mode is 1 (we are not allowed to Tx), we will know not to
1374 * send a deauthentication frame. Those two fields will be
1375 * reset when the disconnection worker runs.
1377 sdata->vif.csa_active = true;
1378 sdata->csa_block_tx = csa_ie.mode;
1380 ieee80211_queue_work(&local->hw, &ifmgd->csa_connection_drop_work);
1381 mutex_unlock(&local->chanctx_mtx);
1382 mutex_unlock(&local->mtx);
1386 ieee80211_find_80211h_pwr_constr(struct ieee80211_sub_if_data *sdata,
1387 struct ieee80211_channel *channel,
1388 const u8 *country_ie, u8 country_ie_len,
1389 const u8 *pwr_constr_elem,
1390 int *chan_pwr, int *pwr_reduction)
1392 struct ieee80211_country_ie_triplet *triplet;
1393 int chan = ieee80211_frequency_to_channel(channel->center_freq);
1394 int i, chan_increment;
1395 bool have_chan_pwr = false;
1398 if (country_ie_len % 2 || country_ie_len < IEEE80211_COUNTRY_IE_MIN_LEN)
1401 triplet = (void *)(country_ie + 3);
1402 country_ie_len -= 3;
1404 switch (channel->band) {
1408 case NL80211_BAND_2GHZ:
1409 case NL80211_BAND_60GHZ:
1412 case NL80211_BAND_5GHZ:
1418 while (country_ie_len >= 3) {
1419 u8 first_channel = triplet->chans.first_channel;
1421 if (first_channel >= IEEE80211_COUNTRY_EXTENSION_ID)
1424 for (i = 0; i < triplet->chans.num_channels; i++) {
1425 if (first_channel + i * chan_increment == chan) {
1426 have_chan_pwr = true;
1427 *chan_pwr = triplet->chans.max_power;
1436 country_ie_len -= 3;
1439 if (have_chan_pwr && pwr_constr_elem)
1440 *pwr_reduction = *pwr_constr_elem;
1444 return have_chan_pwr;
1447 static void ieee80211_find_cisco_dtpc(struct ieee80211_sub_if_data *sdata,
1448 struct ieee80211_channel *channel,
1449 const u8 *cisco_dtpc_ie,
1452 /* From practical testing, the first data byte of the DTPC element
1453 * seems to contain the requested dBm level, and the CLI on Cisco
1454 * APs clearly state the range is -127 to 127 dBm, which indicates
1455 * a signed byte, although it seemingly never actually goes negative.
1456 * The other byte seems to always be zero.
1458 *pwr_level = (__s8)cisco_dtpc_ie[4];
1461 static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata,
1462 struct ieee80211_channel *channel,
1463 struct ieee80211_mgmt *mgmt,
1464 const u8 *country_ie, u8 country_ie_len,
1465 const u8 *pwr_constr_ie,
1466 const u8 *cisco_dtpc_ie)
1468 bool has_80211h_pwr = false, has_cisco_pwr = false;
1469 int chan_pwr = 0, pwr_reduction_80211h = 0;
1470 int pwr_level_cisco, pwr_level_80211h;
1472 __le16 capab = mgmt->u.probe_resp.capab_info;
1475 (capab & cpu_to_le16(WLAN_CAPABILITY_SPECTRUM_MGMT) ||
1476 capab & cpu_to_le16(WLAN_CAPABILITY_RADIO_MEASURE))) {
1477 has_80211h_pwr = ieee80211_find_80211h_pwr_constr(
1478 sdata, channel, country_ie, country_ie_len,
1479 pwr_constr_ie, &chan_pwr, &pwr_reduction_80211h);
1481 max_t(int, 0, chan_pwr - pwr_reduction_80211h);
1484 if (cisco_dtpc_ie) {
1485 ieee80211_find_cisco_dtpc(
1486 sdata, channel, cisco_dtpc_ie, &pwr_level_cisco);
1487 has_cisco_pwr = true;
1490 if (!has_80211h_pwr && !has_cisco_pwr)
1493 /* If we have both 802.11h and Cisco DTPC, apply both limits
1494 * by picking the smallest of the two power levels advertised.
1496 if (has_80211h_pwr &&
1497 (!has_cisco_pwr || pwr_level_80211h <= pwr_level_cisco)) {
1498 new_ap_level = pwr_level_80211h;
1500 if (sdata->ap_power_level == new_ap_level)
1504 "Limiting TX power to %d (%d - %d) dBm as advertised by %pM\n",
1505 pwr_level_80211h, chan_pwr, pwr_reduction_80211h,
1506 sdata->u.mgd.bssid);
1507 } else { /* has_cisco_pwr is always true here. */
1508 new_ap_level = pwr_level_cisco;
1510 if (sdata->ap_power_level == new_ap_level)
1514 "Limiting TX power to %d dBm as advertised by %pM\n",
1515 pwr_level_cisco, sdata->u.mgd.bssid);
1518 sdata->ap_power_level = new_ap_level;
1519 if (__ieee80211_recalc_txpower(sdata))
1520 return BSS_CHANGED_TXPOWER;
1525 static void ieee80211_enable_ps(struct ieee80211_local *local,
1526 struct ieee80211_sub_if_data *sdata)
1528 struct ieee80211_conf *conf = &local->hw.conf;
1531 * If we are scanning right now then the parameters will
1532 * take effect when scan finishes.
1534 if (local->scanning)
1537 if (conf->dynamic_ps_timeout > 0 &&
1538 !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) {
1539 mod_timer(&local->dynamic_ps_timer, jiffies +
1540 msecs_to_jiffies(conf->dynamic_ps_timeout));
1542 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK))
1543 ieee80211_send_nullfunc(local, sdata, true);
1545 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1546 ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
1549 conf->flags |= IEEE80211_CONF_PS;
1550 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1554 static void ieee80211_change_ps(struct ieee80211_local *local)
1556 struct ieee80211_conf *conf = &local->hw.conf;
1558 if (local->ps_sdata) {
1559 ieee80211_enable_ps(local, local->ps_sdata);
1560 } else if (conf->flags & IEEE80211_CONF_PS) {
1561 conf->flags &= ~IEEE80211_CONF_PS;
1562 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1563 del_timer_sync(&local->dynamic_ps_timer);
1564 cancel_work_sync(&local->dynamic_ps_enable_work);
1568 static bool ieee80211_powersave_allowed(struct ieee80211_sub_if_data *sdata)
1570 struct ieee80211_if_managed *mgd = &sdata->u.mgd;
1571 struct sta_info *sta = NULL;
1572 bool authorized = false;
1574 if (!mgd->powersave)
1580 if (!mgd->associated)
1583 if (mgd->flags & IEEE80211_STA_CONNECTION_POLL)
1586 if (!mgd->have_beacon)
1590 sta = sta_info_get(sdata, mgd->bssid);
1592 authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED);
1598 /* need to hold RTNL or interface lock */
1599 void ieee80211_recalc_ps(struct ieee80211_local *local)
1601 struct ieee80211_sub_if_data *sdata, *found = NULL;
1605 if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) {
1606 local->ps_sdata = NULL;
1610 list_for_each_entry(sdata, &local->interfaces, list) {
1611 if (!ieee80211_sdata_running(sdata))
1613 if (sdata->vif.type == NL80211_IFTYPE_AP) {
1614 /* If an AP vif is found, then disable PS
1615 * by setting the count to zero thereby setting
1621 if (sdata->vif.type != NL80211_IFTYPE_STATION)
1627 if (count == 1 && ieee80211_powersave_allowed(found)) {
1628 u8 dtimper = found->u.mgd.dtim_period;
1630 timeout = local->dynamic_ps_forced_timeout;
1633 local->hw.conf.dynamic_ps_timeout = timeout;
1635 /* If the TIM IE is invalid, pretend the value is 1 */
1639 local->hw.conf.ps_dtim_period = dtimper;
1640 local->ps_sdata = found;
1642 local->ps_sdata = NULL;
1645 ieee80211_change_ps(local);
1648 void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata)
1650 bool ps_allowed = ieee80211_powersave_allowed(sdata);
1652 if (sdata->vif.bss_conf.ps != ps_allowed) {
1653 sdata->vif.bss_conf.ps = ps_allowed;
1654 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS);
1658 void ieee80211_dynamic_ps_disable_work(struct work_struct *work)
1660 struct ieee80211_local *local =
1661 container_of(work, struct ieee80211_local,
1662 dynamic_ps_disable_work);
1664 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
1665 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
1666 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1669 ieee80211_wake_queues_by_reason(&local->hw,
1670 IEEE80211_MAX_QUEUE_MAP,
1671 IEEE80211_QUEUE_STOP_REASON_PS,
1675 void ieee80211_dynamic_ps_enable_work(struct work_struct *work)
1677 struct ieee80211_local *local =
1678 container_of(work, struct ieee80211_local,
1679 dynamic_ps_enable_work);
1680 struct ieee80211_sub_if_data *sdata = local->ps_sdata;
1681 struct ieee80211_if_managed *ifmgd;
1682 unsigned long flags;
1685 /* can only happen when PS was just disabled anyway */
1689 ifmgd = &sdata->u.mgd;
1691 if (local->hw.conf.flags & IEEE80211_CONF_PS)
1694 if (local->hw.conf.dynamic_ps_timeout > 0) {
1695 /* don't enter PS if TX frames are pending */
1696 if (drv_tx_frames_pending(local)) {
1697 mod_timer(&local->dynamic_ps_timer, jiffies +
1699 local->hw.conf.dynamic_ps_timeout));
1704 * transmission can be stopped by others which leads to
1705 * dynamic_ps_timer expiry. Postpone the ps timer if it
1706 * is not the actual idle state.
1708 spin_lock_irqsave(&local->queue_stop_reason_lock, flags);
1709 for (q = 0; q < local->hw.queues; q++) {
1710 if (local->queue_stop_reasons[q]) {
1711 spin_unlock_irqrestore(&local->queue_stop_reason_lock,
1713 mod_timer(&local->dynamic_ps_timer, jiffies +
1715 local->hw.conf.dynamic_ps_timeout));
1719 spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags);
1722 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
1723 !(ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1724 if (drv_tx_frames_pending(local)) {
1725 mod_timer(&local->dynamic_ps_timer, jiffies +
1727 local->hw.conf.dynamic_ps_timeout));
1729 ieee80211_send_nullfunc(local, sdata, true);
1730 /* Flush to get the tx status of nullfunc frame */
1731 ieee80211_flush_queues(local, sdata, false);
1735 if (!(ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS) &&
1736 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK)) ||
1737 (ifmgd->flags & IEEE80211_STA_NULLFUNC_ACKED)) {
1738 ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED;
1739 local->hw.conf.flags |= IEEE80211_CONF_PS;
1740 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
1744 void ieee80211_dynamic_ps_timer(struct timer_list *t)
1746 struct ieee80211_local *local = from_timer(local, t, dynamic_ps_timer);
1748 ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work);
1751 void ieee80211_dfs_cac_timer_work(struct work_struct *work)
1753 struct delayed_work *delayed_work = to_delayed_work(work);
1754 struct ieee80211_sub_if_data *sdata =
1755 container_of(delayed_work, struct ieee80211_sub_if_data,
1756 dfs_cac_timer_work);
1757 struct cfg80211_chan_def chandef = sdata->vif.bss_conf.chandef;
1759 mutex_lock(&sdata->local->mtx);
1760 if (sdata->wdev.cac_started) {
1761 ieee80211_vif_release_channel(sdata);
1762 cfg80211_cac_event(sdata->dev, &chandef,
1763 NL80211_RADAR_CAC_FINISHED,
1766 mutex_unlock(&sdata->local->mtx);
1770 __ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1772 struct ieee80211_local *local = sdata->local;
1773 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1777 if (local->hw.queues < IEEE80211_NUM_ACS)
1780 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1781 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
1783 unsigned long now = jiffies;
1785 if (tx_tspec->action == TX_TSPEC_ACTION_NONE &&
1786 tx_tspec->admitted_time &&
1787 time_after(now, tx_tspec->time_slice_start + HZ)) {
1788 tx_tspec->consumed_tx_time = 0;
1789 tx_tspec->time_slice_start = now;
1791 if (tx_tspec->downgraded)
1793 TX_TSPEC_ACTION_STOP_DOWNGRADE;
1796 switch (tx_tspec->action) {
1797 case TX_TSPEC_ACTION_STOP_DOWNGRADE:
1798 /* take the original parameters */
1799 if (drv_conf_tx(local, sdata, ac, &sdata->tx_conf[ac]))
1801 "failed to set TX queue parameters for queue %d\n",
1803 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1804 tx_tspec->downgraded = false;
1807 case TX_TSPEC_ACTION_DOWNGRADE:
1808 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
1809 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1813 /* downgrade next lower non-ACM AC */
1814 for (non_acm_ac = ac + 1;
1815 non_acm_ac < IEEE80211_NUM_ACS;
1817 if (!(sdata->wmm_acm & BIT(7 - 2 * non_acm_ac)))
1819 /* Usually the loop will result in using BK even if it
1820 * requires admission control, but such a configuration
1821 * makes no sense and we have to transmit somehow - the
1822 * AC selection does the same thing.
1823 * If we started out trying to downgrade from BK, then
1824 * the extra condition here might be needed.
1826 if (non_acm_ac >= IEEE80211_NUM_ACS)
1827 non_acm_ac = IEEE80211_AC_BK;
1828 if (drv_conf_tx(local, sdata, ac,
1829 &sdata->tx_conf[non_acm_ac]))
1831 "failed to set TX queue parameters for queue %d\n",
1833 tx_tspec->action = TX_TSPEC_ACTION_NONE;
1835 schedule_delayed_work(&ifmgd->tx_tspec_wk,
1836 tx_tspec->time_slice_start + HZ - now + 1);
1838 case TX_TSPEC_ACTION_NONE:
1847 void ieee80211_sta_handle_tspec_ac_params(struct ieee80211_sub_if_data *sdata)
1849 if (__ieee80211_sta_handle_tspec_ac_params(sdata))
1850 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_QOS);
1853 static void ieee80211_sta_handle_tspec_ac_params_wk(struct work_struct *work)
1855 struct ieee80211_sub_if_data *sdata;
1857 sdata = container_of(work, struct ieee80211_sub_if_data,
1858 u.mgd.tx_tspec_wk.work);
1859 ieee80211_sta_handle_tspec_ac_params(sdata);
1864 ieee80211_sta_wmm_params(struct ieee80211_local *local,
1865 struct ieee80211_sub_if_data *sdata,
1866 const u8 *wmm_param, size_t wmm_param_len,
1867 const struct ieee80211_mu_edca_param_set *mu_edca)
1869 struct ieee80211_tx_queue_params params[IEEE80211_NUM_ACS];
1870 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
1874 u8 uapsd_queues = 0;
1876 if (!local->ops->conf_tx)
1879 if (local->hw.queues < IEEE80211_NUM_ACS)
1885 if (wmm_param_len < 8 || wmm_param[5] /* version */ != 1)
1888 if (ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED)
1889 uapsd_queues = ifmgd->uapsd_queues;
1891 count = wmm_param[6] & 0x0f;
1892 if (count == ifmgd->wmm_last_param_set)
1894 ifmgd->wmm_last_param_set = count;
1896 pos = wmm_param + 8;
1897 left = wmm_param_len - 8;
1899 memset(¶ms, 0, sizeof(params));
1902 for (; left >= 4; left -= 4, pos += 4) {
1903 int aci = (pos[0] >> 5) & 0x03;
1904 int acm = (pos[0] >> 4) & 0x01;
1909 ac = IEEE80211_AC_BK;
1911 sdata->wmm_acm |= BIT(1) | BIT(2); /* BK/- */
1912 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BK)
1914 params[ac].mu_edca = !!mu_edca;
1916 params[ac].mu_edca_param_rec = mu_edca->ac_bk;
1919 ac = IEEE80211_AC_VI;
1921 sdata->wmm_acm |= BIT(4) | BIT(5); /* CL/VI */
1922 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VI)
1924 params[ac].mu_edca = !!mu_edca;
1926 params[ac].mu_edca_param_rec = mu_edca->ac_vi;
1929 ac = IEEE80211_AC_VO;
1931 sdata->wmm_acm |= BIT(6) | BIT(7); /* VO/NC */
1932 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO)
1934 params[ac].mu_edca = !!mu_edca;
1936 params[ac].mu_edca_param_rec = mu_edca->ac_vo;
1940 ac = IEEE80211_AC_BE;
1942 sdata->wmm_acm |= BIT(0) | BIT(3); /* BE/EE */
1943 if (uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_BE)
1945 params[ac].mu_edca = !!mu_edca;
1947 params[ac].mu_edca_param_rec = mu_edca->ac_be;
1951 params[ac].aifs = pos[0] & 0x0f;
1953 if (params[ac].aifs < 2) {
1955 "AP has invalid WMM params (AIFSN=%d for ACI %d), will use 2\n",
1956 params[ac].aifs, aci);
1957 params[ac].aifs = 2;
1959 params[ac].cw_max = ecw2cw((pos[1] & 0xf0) >> 4);
1960 params[ac].cw_min = ecw2cw(pos[1] & 0x0f);
1961 params[ac].txop = get_unaligned_le16(pos + 2);
1962 params[ac].acm = acm;
1963 params[ac].uapsd = uapsd;
1965 if (params[ac].cw_min == 0 ||
1966 params[ac].cw_min > params[ac].cw_max) {
1968 "AP has invalid WMM params (CWmin/max=%d/%d for ACI %d), using defaults\n",
1969 params[ac].cw_min, params[ac].cw_max, aci);
1972 ieee80211_regulatory_limit_wmm_params(sdata, ¶ms[ac], ac);
1975 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) {
1977 "WMM AC=%d acm=%d aifs=%d cWmin=%d cWmax=%d txop=%d uapsd=%d, downgraded=%d\n",
1979 params[ac].aifs, params[ac].cw_min, params[ac].cw_max,
1980 params[ac].txop, params[ac].uapsd,
1981 ifmgd->tx_tspec[ac].downgraded);
1982 sdata->tx_conf[ac] = params[ac];
1983 if (!ifmgd->tx_tspec[ac].downgraded &&
1984 drv_conf_tx(local, sdata, ac, ¶ms[ac]))
1986 "failed to set TX queue parameters for AC %d\n",
1990 /* enable WMM or activate new settings */
1991 sdata->vif.bss_conf.qos = true;
1995 static void __ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
1997 lockdep_assert_held(&sdata->local->mtx);
1999 sdata->u.mgd.flags &= ~IEEE80211_STA_CONNECTION_POLL;
2000 ieee80211_run_deferred_scan(sdata->local);
2003 static void ieee80211_stop_poll(struct ieee80211_sub_if_data *sdata)
2005 mutex_lock(&sdata->local->mtx);
2006 __ieee80211_stop_poll(sdata);
2007 mutex_unlock(&sdata->local->mtx);
2010 static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata,
2011 u16 capab, bool erp_valid, u8 erp)
2013 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2014 struct ieee80211_supported_band *sband;
2016 bool use_protection;
2017 bool use_short_preamble;
2018 bool use_short_slot;
2020 sband = ieee80211_get_sband(sdata);
2025 use_protection = (erp & WLAN_ERP_USE_PROTECTION) != 0;
2026 use_short_preamble = (erp & WLAN_ERP_BARKER_PREAMBLE) == 0;
2028 use_protection = false;
2029 use_short_preamble = !!(capab & WLAN_CAPABILITY_SHORT_PREAMBLE);
2032 use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME);
2033 if (sband->band == NL80211_BAND_5GHZ)
2034 use_short_slot = true;
2036 if (use_protection != bss_conf->use_cts_prot) {
2037 bss_conf->use_cts_prot = use_protection;
2038 changed |= BSS_CHANGED_ERP_CTS_PROT;
2041 if (use_short_preamble != bss_conf->use_short_preamble) {
2042 bss_conf->use_short_preamble = use_short_preamble;
2043 changed |= BSS_CHANGED_ERP_PREAMBLE;
2046 if (use_short_slot != bss_conf->use_short_slot) {
2047 bss_conf->use_short_slot = use_short_slot;
2048 changed |= BSS_CHANGED_ERP_SLOT;
2054 static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata,
2055 struct cfg80211_bss *cbss,
2056 u32 bss_info_changed)
2058 struct ieee80211_bss *bss = (void *)cbss->priv;
2059 struct ieee80211_local *local = sdata->local;
2060 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
2062 bss_info_changed |= BSS_CHANGED_ASSOC;
2063 bss_info_changed |= ieee80211_handle_bss_capability(sdata,
2064 bss_conf->assoc_capability, bss->has_erp_value, bss->erp_value);
2066 sdata->u.mgd.beacon_timeout = usecs_to_jiffies(ieee80211_tu_to_usec(
2067 beacon_loss_count * bss_conf->beacon_int));
2069 sdata->u.mgd.associated = cbss;
2070 memcpy(sdata->u.mgd.bssid, cbss->bssid, ETH_ALEN);
2072 ieee80211_check_rate_mask(sdata);
2074 sdata->u.mgd.flags |= IEEE80211_STA_RESET_SIGNAL_AVE;
2076 if (sdata->vif.p2p ||
2077 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
2078 const struct cfg80211_bss_ies *ies;
2081 ies = rcu_dereference(cbss->ies);
2085 ret = cfg80211_get_p2p_attr(
2086 ies->data, ies->len,
2087 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
2088 (u8 *) &bss_conf->p2p_noa_attr,
2089 sizeof(bss_conf->p2p_noa_attr));
2091 sdata->u.mgd.p2p_noa_index =
2092 bss_conf->p2p_noa_attr.index;
2093 bss_info_changed |= BSS_CHANGED_P2P_PS;
2099 /* just to be sure */
2100 ieee80211_stop_poll(sdata);
2102 ieee80211_led_assoc(local, 1);
2104 if (sdata->u.mgd.have_beacon) {
2106 * If the AP is buggy we may get here with no DTIM period
2107 * known, so assume it's 1 which is the only safe assumption
2108 * in that case, although if the TIM IE is broken powersave
2109 * probably just won't work at all.
2111 bss_conf->dtim_period = sdata->u.mgd.dtim_period ?: 1;
2112 bss_conf->beacon_rate = bss->beacon_rate;
2113 bss_info_changed |= BSS_CHANGED_BEACON_INFO;
2115 bss_conf->beacon_rate = NULL;
2116 bss_conf->dtim_period = 0;
2119 bss_conf->assoc = 1;
2121 /* Tell the driver to monitor connection quality (if supported) */
2122 if (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI &&
2123 bss_conf->cqm_rssi_thold)
2124 bss_info_changed |= BSS_CHANGED_CQM;
2126 /* Enable ARP filtering */
2127 if (bss_conf->arp_addr_cnt)
2128 bss_info_changed |= BSS_CHANGED_ARP_FILTER;
2130 ieee80211_bss_info_change_notify(sdata, bss_info_changed);
2132 mutex_lock(&local->iflist_mtx);
2133 ieee80211_recalc_ps(local);
2134 mutex_unlock(&local->iflist_mtx);
2136 ieee80211_recalc_smps(sdata);
2137 ieee80211_recalc_ps_vif(sdata);
2139 netif_carrier_on(sdata->dev);
2142 static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata,
2143 u16 stype, u16 reason, bool tx,
2146 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2147 struct ieee80211_local *local = sdata->local;
2150 sdata_assert_lock(sdata);
2152 if (WARN_ON_ONCE(tx && !frame_buf))
2155 if (WARN_ON(!ifmgd->associated))
2158 ieee80211_stop_poll(sdata);
2160 ifmgd->associated = NULL;
2161 netif_carrier_off(sdata->dev);
2164 * if we want to get out of ps before disassoc (why?) we have
2165 * to do it before sending disassoc, as otherwise the null-packet
2168 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
2169 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
2170 ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS);
2172 local->ps_sdata = NULL;
2174 /* disable per-vif ps */
2175 ieee80211_recalc_ps_vif(sdata);
2177 /* make sure ongoing transmission finishes */
2181 * drop any frame before deauth/disassoc, this can be data or
2182 * management frame. Since we are disconnecting, we should not
2183 * insist sending these frames which can take time and delay
2184 * the disconnection and possible the roaming.
2187 ieee80211_flush_queues(local, sdata, true);
2189 /* deauthenticate/disassociate now */
2190 if (tx || frame_buf) {
2192 * In multi channel scenarios guarantee that the virtual
2193 * interface is granted immediate airtime to transmit the
2194 * deauthentication frame by calling mgd_prepare_tx, if the
2195 * driver requested so.
2197 if (ieee80211_hw_check(&local->hw, DEAUTH_NEED_MGD_TX_PREP) &&
2198 !ifmgd->have_beacon)
2199 drv_mgd_prepare_tx(sdata->local, sdata, 0);
2201 ieee80211_send_deauth_disassoc(sdata, ifmgd->bssid, stype,
2202 reason, tx, frame_buf);
2205 /* flush out frame - make sure the deauth was actually sent */
2207 ieee80211_flush_queues(local, sdata, false);
2209 /* clear bssid only after building the needed mgmt frames */
2210 eth_zero_addr(ifmgd->bssid);
2212 /* remove AP and TDLS peers */
2213 sta_info_flush(sdata);
2215 /* finally reset all BSS / config parameters */
2216 changed |= ieee80211_reset_erp_info(sdata);
2218 ieee80211_led_assoc(local, 0);
2219 changed |= BSS_CHANGED_ASSOC;
2220 sdata->vif.bss_conf.assoc = false;
2222 ifmgd->p2p_noa_index = -1;
2223 memset(&sdata->vif.bss_conf.p2p_noa_attr, 0,
2224 sizeof(sdata->vif.bss_conf.p2p_noa_attr));
2226 /* on the next assoc, re-program HT/VHT parameters */
2227 memset(&ifmgd->ht_capa, 0, sizeof(ifmgd->ht_capa));
2228 memset(&ifmgd->ht_capa_mask, 0, sizeof(ifmgd->ht_capa_mask));
2229 memset(&ifmgd->vht_capa, 0, sizeof(ifmgd->vht_capa));
2230 memset(&ifmgd->vht_capa_mask, 0, sizeof(ifmgd->vht_capa_mask));
2232 /* reset MU-MIMO ownership and group data */
2233 memset(sdata->vif.bss_conf.mu_group.membership, 0,
2234 sizeof(sdata->vif.bss_conf.mu_group.membership));
2235 memset(sdata->vif.bss_conf.mu_group.position, 0,
2236 sizeof(sdata->vif.bss_conf.mu_group.position));
2237 changed |= BSS_CHANGED_MU_GROUPS;
2238 sdata->vif.mu_mimo_owner = false;
2240 sdata->ap_power_level = IEEE80211_UNSET_POWER_LEVEL;
2242 del_timer_sync(&local->dynamic_ps_timer);
2243 cancel_work_sync(&local->dynamic_ps_enable_work);
2245 /* Disable ARP filtering */
2246 if (sdata->vif.bss_conf.arp_addr_cnt)
2247 changed |= BSS_CHANGED_ARP_FILTER;
2249 sdata->vif.bss_conf.qos = false;
2250 changed |= BSS_CHANGED_QOS;
2252 /* The BSSID (not really interesting) and HT changed */
2253 changed |= BSS_CHANGED_BSSID | BSS_CHANGED_HT;
2254 ieee80211_bss_info_change_notify(sdata, changed);
2256 /* disassociated - set to defaults now */
2257 ieee80211_set_wmm_default(sdata, false, false);
2259 del_timer_sync(&sdata->u.mgd.conn_mon_timer);
2260 del_timer_sync(&sdata->u.mgd.bcn_mon_timer);
2261 del_timer_sync(&sdata->u.mgd.timer);
2262 del_timer_sync(&sdata->u.mgd.chswitch_timer);
2264 sdata->vif.bss_conf.dtim_period = 0;
2265 sdata->vif.bss_conf.beacon_rate = NULL;
2267 ifmgd->have_beacon = false;
2270 mutex_lock(&local->mtx);
2271 ieee80211_vif_release_channel(sdata);
2273 sdata->vif.csa_active = false;
2274 ifmgd->csa_waiting_bcn = false;
2275 ifmgd->csa_ignored_same_chan = false;
2276 if (sdata->csa_block_tx) {
2277 ieee80211_wake_vif_queues(local, sdata,
2278 IEEE80211_QUEUE_STOP_REASON_CSA);
2279 sdata->csa_block_tx = false;
2281 mutex_unlock(&local->mtx);
2283 /* existing TX TSPEC sessions no longer exist */
2284 memset(ifmgd->tx_tspec, 0, sizeof(ifmgd->tx_tspec));
2285 cancel_delayed_work_sync(&ifmgd->tx_tspec_wk);
2287 sdata->encrypt_headroom = IEEE80211_ENCRYPT_HEADROOM;
2290 void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata,
2291 struct ieee80211_hdr *hdr)
2294 * We can postpone the mgd.timer whenever receiving unicast frames
2295 * from AP because we know that the connection is working both ways
2296 * at that time. But multicast frames (and hence also beacons) must
2297 * be ignored here, because we need to trigger the timer during
2298 * data idle periods for sending the periodic probe request to the
2299 * AP we're connected to.
2301 if (is_multicast_ether_addr(hdr->addr1))
2304 ieee80211_sta_reset_conn_monitor(sdata);
2307 static void ieee80211_reset_ap_probe(struct ieee80211_sub_if_data *sdata)
2309 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2310 struct ieee80211_local *local = sdata->local;
2312 mutex_lock(&local->mtx);
2313 if (!(ifmgd->flags & IEEE80211_STA_CONNECTION_POLL))
2316 __ieee80211_stop_poll(sdata);
2318 mutex_lock(&local->iflist_mtx);
2319 ieee80211_recalc_ps(local);
2320 mutex_unlock(&local->iflist_mtx);
2322 if (ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
2326 * We've received a probe response, but are not sure whether
2327 * we have or will be receiving any beacons or data, so let's
2328 * schedule the timers again, just in case.
2330 ieee80211_sta_reset_beacon_monitor(sdata);
2332 mod_timer(&ifmgd->conn_mon_timer,
2333 round_jiffies_up(jiffies +
2334 IEEE80211_CONNECTION_IDLE_TIME));
2336 mutex_unlock(&local->mtx);
2339 static void ieee80211_sta_tx_wmm_ac_notify(struct ieee80211_sub_if_data *sdata,
2340 struct ieee80211_hdr *hdr,
2343 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2344 u16 tid = ieee80211_get_tid(hdr);
2345 int ac = ieee80211_ac_from_tid(tid);
2346 struct ieee80211_sta_tx_tspec *tx_tspec = &ifmgd->tx_tspec[ac];
2347 unsigned long now = jiffies;
2349 if (likely(!tx_tspec->admitted_time))
2352 if (time_after(now, tx_tspec->time_slice_start + HZ)) {
2353 tx_tspec->consumed_tx_time = 0;
2354 tx_tspec->time_slice_start = now;
2356 if (tx_tspec->downgraded) {
2357 tx_tspec->action = TX_TSPEC_ACTION_STOP_DOWNGRADE;
2358 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2362 if (tx_tspec->downgraded)
2365 tx_tspec->consumed_tx_time += tx_time;
2367 if (tx_tspec->consumed_tx_time >= tx_tspec->admitted_time) {
2368 tx_tspec->downgraded = true;
2369 tx_tspec->action = TX_TSPEC_ACTION_DOWNGRADE;
2370 schedule_delayed_work(&ifmgd->tx_tspec_wk, 0);
2374 void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata,
2375 struct ieee80211_hdr *hdr, bool ack, u16 tx_time)
2377 ieee80211_sta_tx_wmm_ac_notify(sdata, hdr, tx_time);
2379 if (!ieee80211_is_data(hdr->frame_control))
2382 if (ieee80211_is_nullfunc(hdr->frame_control) &&
2383 sdata->u.mgd.probe_send_count > 0) {
2385 ieee80211_sta_reset_conn_monitor(sdata);
2387 sdata->u.mgd.nullfunc_failed = true;
2388 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
2393 ieee80211_sta_reset_conn_monitor(sdata);
2396 static void ieee80211_mlme_send_probe_req(struct ieee80211_sub_if_data *sdata,
2397 const u8 *src, const u8 *dst,
2398 const u8 *ssid, size_t ssid_len,
2399 struct ieee80211_channel *channel)
2401 struct sk_buff *skb;
2403 skb = ieee80211_build_probe_req(sdata, src, dst, (u32)-1, channel,
2404 ssid, ssid_len, NULL, 0,
2405 IEEE80211_PROBE_FLAG_DIRECTED);
2407 ieee80211_tx_skb(sdata, skb);
2410 static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata)
2412 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2414 u8 *dst = ifmgd->associated->bssid;
2415 u8 unicast_limit = max(1, max_probe_tries - 3);
2416 struct sta_info *sta;
2419 * Try sending broadcast probe requests for the last three
2420 * probe requests after the first ones failed since some
2421 * buggy APs only support broadcast probe requests.
2423 if (ifmgd->probe_send_count >= unicast_limit)
2427 * When the hardware reports an accurate Tx ACK status, it's
2428 * better to send a nullfunc frame instead of a probe request,
2429 * as it will kick us off the AP quickly if we aren't associated
2430 * anymore. The timeout will be reset if the frame is ACKed by
2433 ifmgd->probe_send_count++;
2436 mutex_lock(&sdata->local->sta_mtx);
2437 sta = sta_info_get(sdata, dst);
2439 ieee80211_check_fast_rx(sta);
2440 mutex_unlock(&sdata->local->sta_mtx);
2443 if (ieee80211_hw_check(&sdata->local->hw, REPORTS_TX_ACK_STATUS)) {
2444 ifmgd->nullfunc_failed = false;
2445 ieee80211_send_nullfunc(sdata->local, sdata, false);
2450 ssid = ieee80211_bss_get_ie(ifmgd->associated, WLAN_EID_SSID);
2451 if (WARN_ON_ONCE(ssid == NULL))
2456 ieee80211_mlme_send_probe_req(sdata, sdata->vif.addr, dst,
2458 ifmgd->associated->channel);
2462 ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms);
2463 run_again(sdata, ifmgd->probe_timeout);
2466 static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata,
2469 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2470 bool already = false;
2472 if (!ieee80211_sdata_running(sdata))
2477 if (!ifmgd->associated)
2480 mutex_lock(&sdata->local->mtx);
2482 if (sdata->local->tmp_channel || sdata->local->scanning) {
2483 mutex_unlock(&sdata->local->mtx);
2488 mlme_dbg_ratelimited(sdata,
2489 "detected beacon loss from AP (missed %d beacons) - probing\n",
2492 ieee80211_cqm_beacon_loss_notify(&sdata->vif, GFP_KERNEL);
2496 * The driver/our work has already reported this event or the
2497 * connection monitoring has kicked in and we have already sent
2498 * a probe request. Or maybe the AP died and the driver keeps
2499 * reporting until we disassociate...
2501 * In either case we have to ignore the current call to this
2502 * function (except for setting the correct probe reason bit)
2503 * because otherwise we would reset the timer every time and
2504 * never check whether we received a probe response!
2506 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL)
2509 ifmgd->flags |= IEEE80211_STA_CONNECTION_POLL;
2511 mutex_unlock(&sdata->local->mtx);
2516 mutex_lock(&sdata->local->iflist_mtx);
2517 ieee80211_recalc_ps(sdata->local);
2518 mutex_unlock(&sdata->local->iflist_mtx);
2520 ifmgd->probe_send_count = 0;
2521 ieee80211_mgd_probe_ap_send(sdata);
2523 sdata_unlock(sdata);
2526 struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw,
2527 struct ieee80211_vif *vif)
2529 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2530 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2531 struct cfg80211_bss *cbss;
2532 struct sk_buff *skb;
2536 if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION))
2539 sdata_assert_lock(sdata);
2541 if (ifmgd->associated)
2542 cbss = ifmgd->associated;
2543 else if (ifmgd->auth_data)
2544 cbss = ifmgd->auth_data->bss;
2545 else if (ifmgd->assoc_data)
2546 cbss = ifmgd->assoc_data->bss;
2551 ssid = ieee80211_bss_get_ie(cbss, WLAN_EID_SSID);
2552 if (WARN_ON_ONCE(ssid == NULL))
2557 skb = ieee80211_build_probe_req(sdata, sdata->vif.addr, cbss->bssid,
2558 (u32) -1, cbss->channel,
2560 NULL, 0, IEEE80211_PROBE_FLAG_DIRECTED);
2565 EXPORT_SYMBOL(ieee80211_ap_probereq_get);
2567 static void ieee80211_report_disconnect(struct ieee80211_sub_if_data *sdata,
2568 const u8 *buf, size_t len, bool tx,
2571 struct ieee80211_event event = {
2573 .u.mlme.data = tx ? DEAUTH_TX_EVENT : DEAUTH_RX_EVENT,
2574 .u.mlme.reason = reason,
2578 cfg80211_tx_mlme_mgmt(sdata->dev, buf, len);
2580 cfg80211_rx_mlme_mgmt(sdata->dev, buf, len);
2582 drv_event_callback(sdata->local, sdata, &event);
2585 static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata)
2587 struct ieee80211_local *local = sdata->local;
2588 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2589 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
2593 if (!ifmgd->associated) {
2594 sdata_unlock(sdata);
2598 tx = !sdata->csa_block_tx;
2600 /* AP is probably out of range (or not reachable for another reason) so
2601 * remove the bss struct for that AP.
2603 cfg80211_unlink_bss(local->hw.wiphy, ifmgd->associated);
2605 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
2606 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
2608 mutex_lock(&local->mtx);
2609 sdata->vif.csa_active = false;
2610 ifmgd->csa_waiting_bcn = false;
2611 if (sdata->csa_block_tx) {
2612 ieee80211_wake_vif_queues(local, sdata,
2613 IEEE80211_QUEUE_STOP_REASON_CSA);
2614 sdata->csa_block_tx = false;
2616 mutex_unlock(&local->mtx);
2618 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), tx,
2619 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY);
2621 sdata_unlock(sdata);
2624 static void ieee80211_beacon_connection_loss_work(struct work_struct *work)
2626 struct ieee80211_sub_if_data *sdata =
2627 container_of(work, struct ieee80211_sub_if_data,
2628 u.mgd.beacon_connection_loss_work);
2629 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2631 if (ifmgd->associated)
2632 ifmgd->beacon_loss_count++;
2634 if (ifmgd->connection_loss) {
2635 sdata_info(sdata, "Connection to AP %pM lost\n",
2637 __ieee80211_disconnect(sdata);
2639 ieee80211_mgd_probe_ap(sdata, true);
2643 static void ieee80211_csa_connection_drop_work(struct work_struct *work)
2645 struct ieee80211_sub_if_data *sdata =
2646 container_of(work, struct ieee80211_sub_if_data,
2647 u.mgd.csa_connection_drop_work);
2649 __ieee80211_disconnect(sdata);
2652 void ieee80211_beacon_loss(struct ieee80211_vif *vif)
2654 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2655 struct ieee80211_hw *hw = &sdata->local->hw;
2657 trace_api_beacon_loss(sdata);
2659 sdata->u.mgd.connection_loss = false;
2660 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2662 EXPORT_SYMBOL(ieee80211_beacon_loss);
2664 void ieee80211_connection_loss(struct ieee80211_vif *vif)
2666 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
2667 struct ieee80211_hw *hw = &sdata->local->hw;
2669 trace_api_connection_loss(sdata);
2671 sdata->u.mgd.connection_loss = true;
2672 ieee80211_queue_work(hw, &sdata->u.mgd.beacon_connection_loss_work);
2674 EXPORT_SYMBOL(ieee80211_connection_loss);
2677 static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata,
2680 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2682 sdata_assert_lock(sdata);
2686 * we are not authenticated yet, the only timer that could be
2687 * running is the timeout for the authentication response which
2688 * which is not relevant anymore.
2690 del_timer_sync(&sdata->u.mgd.timer);
2691 sta_info_destroy_addr(sdata, auth_data->bss->bssid);
2693 eth_zero_addr(sdata->u.mgd.bssid);
2694 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2695 sdata->u.mgd.flags = 0;
2696 mutex_lock(&sdata->local->mtx);
2697 ieee80211_vif_release_channel(sdata);
2698 mutex_unlock(&sdata->local->mtx);
2701 cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss);
2703 sdata->u.mgd.auth_data = NULL;
2706 static void ieee80211_destroy_assoc_data(struct ieee80211_sub_if_data *sdata,
2707 bool assoc, bool abandon)
2709 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
2711 sdata_assert_lock(sdata);
2715 * we are not associated yet, the only timer that could be
2716 * running is the timeout for the association response which
2717 * which is not relevant anymore.
2719 del_timer_sync(&sdata->u.mgd.timer);
2720 sta_info_destroy_addr(sdata, assoc_data->bss->bssid);
2722 eth_zero_addr(sdata->u.mgd.bssid);
2723 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
2724 sdata->u.mgd.flags = 0;
2725 sdata->vif.mu_mimo_owner = false;
2727 mutex_lock(&sdata->local->mtx);
2728 ieee80211_vif_release_channel(sdata);
2729 mutex_unlock(&sdata->local->mtx);
2732 cfg80211_abandon_assoc(sdata->dev, assoc_data->bss);
2736 sdata->u.mgd.assoc_data = NULL;
2739 static void ieee80211_auth_challenge(struct ieee80211_sub_if_data *sdata,
2740 struct ieee80211_mgmt *mgmt, size_t len)
2742 struct ieee80211_local *local = sdata->local;
2743 struct ieee80211_mgd_auth_data *auth_data = sdata->u.mgd.auth_data;
2745 struct ieee802_11_elems elems;
2748 pos = mgmt->u.auth.variable;
2749 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
2750 if (!elems.challenge)
2752 auth_data->expected_transaction = 4;
2753 drv_mgd_prepare_tx(sdata->local, sdata, 0);
2754 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
2755 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
2756 IEEE80211_TX_INTFL_MLME_CONN_TX;
2757 ieee80211_send_auth(sdata, 3, auth_data->algorithm, 0,
2758 elems.challenge - 2, elems.challenge_len + 2,
2759 auth_data->bss->bssid, auth_data->bss->bssid,
2760 auth_data->key, auth_data->key_len,
2761 auth_data->key_idx, tx_flags);
2764 static bool ieee80211_mark_sta_auth(struct ieee80211_sub_if_data *sdata,
2767 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2768 struct sta_info *sta;
2770 sdata_info(sdata, "authenticated\n");
2771 ifmgd->auth_data->done = true;
2772 ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC;
2773 ifmgd->auth_data->timeout_started = true;
2774 run_again(sdata, ifmgd->auth_data->timeout);
2776 /* move station state to auth */
2777 mutex_lock(&sdata->local->sta_mtx);
2778 sta = sta_info_get(sdata, bssid);
2780 WARN_ONCE(1, "%s: STA %pM not found", sdata->name, bssid);
2783 if (sta_info_move_state(sta, IEEE80211_STA_AUTH)) {
2784 sdata_info(sdata, "failed moving %pM to auth\n", bssid);
2787 mutex_unlock(&sdata->local->sta_mtx);
2792 static void ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata,
2793 struct ieee80211_mgmt *mgmt, size_t len)
2795 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2797 u16 auth_alg, auth_transaction, status_code;
2798 struct ieee80211_event event = {
2800 .u.mlme.data = AUTH_EVENT,
2803 sdata_assert_lock(sdata);
2808 if (!ifmgd->auth_data || ifmgd->auth_data->done)
2811 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
2813 if (!ether_addr_equal(bssid, mgmt->bssid))
2816 auth_alg = le16_to_cpu(mgmt->u.auth.auth_alg);
2817 auth_transaction = le16_to_cpu(mgmt->u.auth.auth_transaction);
2818 status_code = le16_to_cpu(mgmt->u.auth.status_code);
2820 if (auth_alg != ifmgd->auth_data->algorithm ||
2821 (auth_alg != WLAN_AUTH_SAE &&
2822 auth_transaction != ifmgd->auth_data->expected_transaction) ||
2823 (auth_alg == WLAN_AUTH_SAE &&
2824 (auth_transaction < ifmgd->auth_data->expected_transaction ||
2825 auth_transaction > 2))) {
2826 sdata_info(sdata, "%pM unexpected authentication state: alg %d (expected %d) transact %d (expected %d)\n",
2827 mgmt->sa, auth_alg, ifmgd->auth_data->algorithm,
2829 ifmgd->auth_data->expected_transaction);
2833 if (status_code != WLAN_STATUS_SUCCESS) {
2834 sdata_info(sdata, "%pM denied authentication (status %d)\n",
2835 mgmt->sa, status_code);
2836 ieee80211_destroy_auth_data(sdata, false);
2837 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2838 event.u.mlme.status = MLME_DENIED;
2839 event.u.mlme.reason = status_code;
2840 drv_event_callback(sdata->local, sdata, &event);
2844 switch (ifmgd->auth_data->algorithm) {
2845 case WLAN_AUTH_OPEN:
2846 case WLAN_AUTH_LEAP:
2849 case WLAN_AUTH_FILS_SK:
2850 case WLAN_AUTH_FILS_SK_PFS:
2851 case WLAN_AUTH_FILS_PK:
2853 case WLAN_AUTH_SHARED_KEY:
2854 if (ifmgd->auth_data->expected_transaction != 4) {
2855 ieee80211_auth_challenge(sdata, mgmt, len);
2856 /* need another frame */
2861 WARN_ONCE(1, "invalid auth alg %d",
2862 ifmgd->auth_data->algorithm);
2866 event.u.mlme.status = MLME_SUCCESS;
2867 drv_event_callback(sdata->local, sdata, &event);
2868 if (ifmgd->auth_data->algorithm != WLAN_AUTH_SAE ||
2869 (auth_transaction == 2 &&
2870 ifmgd->auth_data->expected_transaction == 2)) {
2871 if (!ieee80211_mark_sta_auth(sdata, bssid))
2873 } else if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE &&
2874 auth_transaction == 2) {
2875 sdata_info(sdata, "SAE peer confirmed\n");
2876 ifmgd->auth_data->peer_confirmed = true;
2879 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2882 mutex_unlock(&sdata->local->sta_mtx);
2883 /* ignore frame -- wait for timeout */
2886 #define case_WLAN(type) \
2887 case WLAN_REASON_##type: return #type
2889 static const char *ieee80211_get_reason_code_string(u16 reason_code)
2891 switch (reason_code) {
2892 case_WLAN(UNSPECIFIED);
2893 case_WLAN(PREV_AUTH_NOT_VALID);
2894 case_WLAN(DEAUTH_LEAVING);
2895 case_WLAN(DISASSOC_DUE_TO_INACTIVITY);
2896 case_WLAN(DISASSOC_AP_BUSY);
2897 case_WLAN(CLASS2_FRAME_FROM_NONAUTH_STA);
2898 case_WLAN(CLASS3_FRAME_FROM_NONASSOC_STA);
2899 case_WLAN(DISASSOC_STA_HAS_LEFT);
2900 case_WLAN(STA_REQ_ASSOC_WITHOUT_AUTH);
2901 case_WLAN(DISASSOC_BAD_POWER);
2902 case_WLAN(DISASSOC_BAD_SUPP_CHAN);
2903 case_WLAN(INVALID_IE);
2904 case_WLAN(MIC_FAILURE);
2905 case_WLAN(4WAY_HANDSHAKE_TIMEOUT);
2906 case_WLAN(GROUP_KEY_HANDSHAKE_TIMEOUT);
2907 case_WLAN(IE_DIFFERENT);
2908 case_WLAN(INVALID_GROUP_CIPHER);
2909 case_WLAN(INVALID_PAIRWISE_CIPHER);
2910 case_WLAN(INVALID_AKMP);
2911 case_WLAN(UNSUPP_RSN_VERSION);
2912 case_WLAN(INVALID_RSN_IE_CAP);
2913 case_WLAN(IEEE8021X_FAILED);
2914 case_WLAN(CIPHER_SUITE_REJECTED);
2915 case_WLAN(DISASSOC_UNSPECIFIED_QOS);
2916 case_WLAN(DISASSOC_QAP_NO_BANDWIDTH);
2917 case_WLAN(DISASSOC_LOW_ACK);
2918 case_WLAN(DISASSOC_QAP_EXCEED_TXOP);
2919 case_WLAN(QSTA_LEAVE_QBSS);
2920 case_WLAN(QSTA_NOT_USE);
2921 case_WLAN(QSTA_REQUIRE_SETUP);
2922 case_WLAN(QSTA_TIMEOUT);
2923 case_WLAN(QSTA_CIPHER_NOT_SUPP);
2924 case_WLAN(MESH_PEER_CANCELED);
2925 case_WLAN(MESH_MAX_PEERS);
2926 case_WLAN(MESH_CONFIG);
2927 case_WLAN(MESH_CLOSE);
2928 case_WLAN(MESH_MAX_RETRIES);
2929 case_WLAN(MESH_CONFIRM_TIMEOUT);
2930 case_WLAN(MESH_INVALID_GTK);
2931 case_WLAN(MESH_INCONSISTENT_PARAM);
2932 case_WLAN(MESH_INVALID_SECURITY);
2933 case_WLAN(MESH_PATH_ERROR);
2934 case_WLAN(MESH_PATH_NOFORWARD);
2935 case_WLAN(MESH_PATH_DEST_UNREACHABLE);
2936 case_WLAN(MAC_EXISTS_IN_MBSS);
2937 case_WLAN(MESH_CHAN_REGULATORY);
2938 case_WLAN(MESH_CHAN);
2939 default: return "<unknown>";
2943 static void ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata,
2944 struct ieee80211_mgmt *mgmt, size_t len)
2946 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2947 u16 reason_code = le16_to_cpu(mgmt->u.deauth.reason_code);
2949 sdata_assert_lock(sdata);
2954 if (ifmgd->associated &&
2955 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) {
2956 const u8 *bssid = ifmgd->associated->bssid;
2958 sdata_info(sdata, "deauthenticated from %pM (Reason: %u=%s)\n",
2960 ieee80211_get_reason_code_string(reason_code));
2962 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
2964 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false,
2969 if (ifmgd->assoc_data &&
2970 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
2971 const u8 *bssid = ifmgd->assoc_data->bss->bssid;
2974 "deauthenticated from %pM while associating (Reason: %u=%s)\n",
2976 ieee80211_get_reason_code_string(reason_code));
2978 ieee80211_destroy_assoc_data(sdata, false, true);
2980 cfg80211_rx_mlme_mgmt(sdata->dev, (u8 *)mgmt, len);
2986 static void ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata,
2987 struct ieee80211_mgmt *mgmt, size_t len)
2989 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
2992 sdata_assert_lock(sdata);
2997 if (!ifmgd->associated ||
2998 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3001 reason_code = le16_to_cpu(mgmt->u.disassoc.reason_code);
3003 sdata_info(sdata, "disassociated from %pM (Reason: %u=%s)\n",
3004 mgmt->sa, reason_code,
3005 ieee80211_get_reason_code_string(reason_code));
3007 ieee80211_set_disassoc(sdata, 0, 0, false, NULL);
3009 ieee80211_report_disconnect(sdata, (u8 *)mgmt, len, false, reason_code);
3012 static void ieee80211_get_rates(struct ieee80211_supported_band *sband,
3013 u8 *supp_rates, unsigned int supp_rates_len,
3014 u32 *rates, u32 *basic_rates,
3015 bool *have_higher_than_11mbit,
3016 int *min_rate, int *min_rate_index,
3021 for (i = 0; i < supp_rates_len; i++) {
3022 int rate = supp_rates[i] & 0x7f;
3023 bool is_basic = !!(supp_rates[i] & 0x80);
3025 if ((rate * 5 * (1 << shift)) > 110)
3026 *have_higher_than_11mbit = true;
3029 * Skip HT and VHT BSS membership selectors since they're not
3032 * Note: Even though the membership selector and the basic
3033 * rate flag share the same bit, they are not exactly
3036 if (supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_HT_PHY) ||
3037 supp_rates[i] == (0x80 | BSS_MEMBERSHIP_SELECTOR_VHT_PHY))
3040 for (j = 0; j < sband->n_bitrates; j++) {
3041 struct ieee80211_rate *br;
3044 br = &sband->bitrates[j];
3046 brate = DIV_ROUND_UP(br->bitrate, (1 << shift) * 5);
3047 if (brate == rate) {
3050 *basic_rates |= BIT(j);
3051 if ((rate * 5) < *min_rate) {
3052 *min_rate = rate * 5;
3053 *min_rate_index = j;
3061 static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata,
3062 struct cfg80211_bss *cbss,
3063 struct ieee80211_mgmt *mgmt, size_t len)
3065 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3066 struct ieee80211_local *local = sdata->local;
3067 struct ieee80211_supported_band *sband;
3068 struct sta_info *sta;
3070 u16 capab_info, aid;
3071 struct ieee802_11_elems elems;
3072 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3073 const struct cfg80211_bss_ies *bss_ies = NULL;
3074 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3079 /* AssocResp and ReassocResp have identical structure */
3081 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3082 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3085 * The 5 MSB of the AID field are reserved
3086 * (802.11-2016 9.4.1.8 AID field)
3090 ifmgd->broken_ap = false;
3092 if (aid == 0 || aid > IEEE80211_MAX_AID) {
3093 sdata_info(sdata, "invalid AID value %d (out of range), turn off PS\n",
3096 ifmgd->broken_ap = true;
3099 pos = mgmt->u.assoc_resp.variable;
3100 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
3102 if (!elems.supp_rates) {
3103 sdata_info(sdata, "no SuppRates element in AssocResp\n");
3108 ifmgd->tdls_chan_switch_prohibited =
3109 elems.ext_capab && elems.ext_capab_len >= 5 &&
3110 (elems.ext_capab[4] & WLAN_EXT_CAPA5_TDLS_CH_SW_PROHIBITED);
3113 * Some APs are erroneously not including some information in their
3114 * (re)association response frames. Try to recover by using the data
3115 * from the beacon or probe response. This seems to afflict mobile
3116 * 2G/3G/4G wifi routers, reported models include the "Onda PN51T",
3117 * "Vodafone PocketWiFi 2", "ZTE MF60" and a similar T-Mobile device.
3119 if ((assoc_data->wmm && !elems.wmm_param) ||
3120 (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
3121 (!elems.ht_cap_elem || !elems.ht_operation)) ||
3122 (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
3123 (!elems.vht_cap_elem || !elems.vht_operation))) {
3124 const struct cfg80211_bss_ies *ies;
3125 struct ieee802_11_elems bss_elems;
3128 ies = rcu_dereference(cbss->ies);
3130 bss_ies = kmemdup(ies, sizeof(*ies) + ies->len,
3136 ieee802_11_parse_elems(bss_ies->data, bss_ies->len,
3138 if (assoc_data->wmm &&
3139 !elems.wmm_param && bss_elems.wmm_param) {
3140 elems.wmm_param = bss_elems.wmm_param;
3142 "AP bug: WMM param missing from AssocResp\n");
3146 * Also check if we requested HT/VHT, otherwise the AP doesn't
3147 * have to include the IEs in the (re)association response.
3149 if (!elems.ht_cap_elem && bss_elems.ht_cap_elem &&
3150 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
3151 elems.ht_cap_elem = bss_elems.ht_cap_elem;
3153 "AP bug: HT capability missing from AssocResp\n");
3155 if (!elems.ht_operation && bss_elems.ht_operation &&
3156 !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
3157 elems.ht_operation = bss_elems.ht_operation;
3159 "AP bug: HT operation missing from AssocResp\n");
3161 if (!elems.vht_cap_elem && bss_elems.vht_cap_elem &&
3162 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
3163 elems.vht_cap_elem = bss_elems.vht_cap_elem;
3165 "AP bug: VHT capa missing from AssocResp\n");
3167 if (!elems.vht_operation && bss_elems.vht_operation &&
3168 !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) {
3169 elems.vht_operation = bss_elems.vht_operation;
3171 "AP bug: VHT operation missing from AssocResp\n");
3176 * We previously checked these in the beacon/probe response, so
3177 * they should be present here. This is just a safety net.
3179 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
3180 (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) {
3182 "HT AP is missing WMM params or HT capability/operation\n");
3187 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
3188 (!elems.vht_cap_elem || !elems.vht_operation)) {
3190 "VHT AP is missing VHT capability/operation\n");
3195 mutex_lock(&sdata->local->sta_mtx);
3197 * station info was already allocated and inserted before
3198 * the association and should be available to us
3200 sta = sta_info_get(sdata, cbss->bssid);
3201 if (WARN_ON(!sta)) {
3202 mutex_unlock(&sdata->local->sta_mtx);
3207 sband = ieee80211_get_sband(sdata);
3209 mutex_unlock(&sdata->local->sta_mtx);
3215 * If AP doesn't support HT, or it doesn't have HE mandatory IEs, mark
3216 * HE as disabled. If on the 5GHz band, make sure it supports VHT.
3218 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT ||
3219 (sband->band == NL80211_BAND_5GHZ &&
3220 ifmgd->flags & IEEE80211_STA_DISABLE_VHT) ||
3221 (!elems.he_cap && !elems.he_operation))
3222 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
3224 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) &&
3225 (!elems.he_cap || !elems.he_operation)) {
3226 mutex_unlock(&sdata->local->sta_mtx);
3228 "HE AP is missing HE capability/operation\n");
3233 /* Set up internal HT/VHT capabilities */
3234 if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT))
3235 ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
3236 elems.ht_cap_elem, sta);
3238 if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT))
3239 ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband,
3240 elems.vht_cap_elem, sta);
3242 if (elems.he_operation && !(ifmgd->flags & IEEE80211_STA_DISABLE_HE) &&
3244 ieee80211_he_cap_ie_to_sta_he_cap(sdata, sband,
3249 bss_conf->he_support = sta->sta.he_cap.has_he;
3251 bss_conf->he_support = false;
3254 if (bss_conf->he_support) {
3255 bss_conf->bss_color =
3256 le32_get_bits(elems.he_operation->he_oper_params,
3257 IEEE80211_HE_OPERATION_BSS_COLOR_MASK);
3259 bss_conf->htc_trig_based_pkt_ext =
3260 le32_get_bits(elems.he_operation->he_oper_params,
3261 IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK);
3262 bss_conf->frame_time_rts_th =
3263 le32_get_bits(elems.he_operation->he_oper_params,
3264 IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK);
3266 bss_conf->multi_sta_back_32bit =
3267 sta->sta.he_cap.he_cap_elem.mac_cap_info[2] &
3268 IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP;
3270 bss_conf->ack_enabled =
3271 sta->sta.he_cap.he_cap_elem.mac_cap_info[2] &
3272 IEEE80211_HE_MAC_CAP2_ACK_EN;
3274 bss_conf->uora_exists = !!elems.uora_element;
3275 if (elems.uora_element)
3276 bss_conf->uora_ocw_range = elems.uora_element[0];
3278 /* TODO: OPEN: what happens if BSS color disable is set? */
3282 * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data
3283 * in their association response, so ignore that data for our own
3284 * configuration. If it changed since the last beacon, we'll get the
3285 * next beacon and update then.
3289 * If an operating mode notification IE is present, override the
3290 * NSS calculation (that would be done in rate_control_rate_init())
3291 * and use the # of streams from that element.
3293 if (elems.opmode_notif &&
3294 !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) {
3297 nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK;
3298 nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT;
3300 sta->sta.rx_nss = nss;
3303 rate_control_rate_init(sta);
3305 if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) {
3306 set_sta_flag(sta, WLAN_STA_MFP);
3307 sta->sta.mfp = true;
3309 sta->sta.mfp = false;
3312 sta->sta.wme = elems.wmm_param && local->hw.queues >= IEEE80211_NUM_ACS;
3314 err = sta_info_move_state(sta, IEEE80211_STA_ASSOC);
3315 if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT))
3316 err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED);
3319 "failed to move station %pM to desired state\n",
3321 WARN_ON(__sta_info_destroy(sta));
3322 mutex_unlock(&sdata->local->sta_mtx);
3327 mutex_unlock(&sdata->local->sta_mtx);
3330 * Always handle WMM once after association regardless
3331 * of the first value the AP uses. Setting -1 here has
3332 * that effect because the AP values is an unsigned
3335 ifmgd->wmm_last_param_set = -1;
3337 if (ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
3338 ieee80211_set_wmm_default(sdata, false, false);
3339 } else if (!ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3340 elems.wmm_param_len,
3341 elems.mu_edca_param_set)) {
3342 /* still enable QoS since we might have HT/VHT */
3343 ieee80211_set_wmm_default(sdata, false, true);
3344 /* set the disable-WMM flag in this case to disable
3345 * tracking WMM parameter changes in the beacon if
3346 * the parameters weren't actually valid. Doing so
3347 * avoids changing parameters very strangely when
3348 * the AP is going back and forth between valid and
3349 * invalid parameters.
3351 ifmgd->flags |= IEEE80211_STA_DISABLE_WMM;
3353 changed |= BSS_CHANGED_QOS;
3355 if (elems.max_idle_period_ie) {
3356 bss_conf->max_idle_period =
3357 le16_to_cpu(elems.max_idle_period_ie->max_idle_period);
3358 bss_conf->protected_keep_alive =
3359 !!(elems.max_idle_period_ie->idle_options &
3360 WLAN_IDLE_OPTIONS_PROTECTED_KEEP_ALIVE);
3361 changed |= BSS_CHANGED_KEEP_ALIVE;
3363 bss_conf->max_idle_period = 0;
3364 bss_conf->protected_keep_alive = false;
3367 /* set AID and assoc capability,
3368 * ieee80211_set_associated() will tell the driver */
3369 bss_conf->aid = aid;
3370 bss_conf->assoc_capability = capab_info;
3371 ieee80211_set_associated(sdata, cbss, changed);
3374 * If we're using 4-addr mode, let the AP know that we're
3375 * doing so, so that it can create the STA VLAN on its side
3377 if (ifmgd->use_4addr)
3378 ieee80211_send_4addr_nullfunc(local, sdata);
3381 * Start timer to probe the connection to the AP now.
3382 * Also start the timer that will detect beacon loss.
3384 ieee80211_sta_rx_notify(sdata, (struct ieee80211_hdr *)mgmt);
3385 ieee80211_sta_reset_beacon_monitor(sdata);
3393 static void ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata,
3394 struct ieee80211_mgmt *mgmt,
3397 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3398 struct ieee80211_mgd_assoc_data *assoc_data = ifmgd->assoc_data;
3399 u16 capab_info, status_code, aid;
3400 struct ieee802_11_elems elems;
3401 int ac, uapsd_queues = -1;
3404 struct cfg80211_bss *bss;
3405 struct ieee80211_event event = {
3407 .u.mlme.data = ASSOC_EVENT,
3410 sdata_assert_lock(sdata);
3414 if (!ether_addr_equal(assoc_data->bss->bssid, mgmt->bssid))
3418 * AssocResp and ReassocResp have identical structure, so process both
3419 * of them in this function.
3425 reassoc = ieee80211_is_reassoc_resp(mgmt->frame_control);
3426 capab_info = le16_to_cpu(mgmt->u.assoc_resp.capab_info);
3427 status_code = le16_to_cpu(mgmt->u.assoc_resp.status_code);
3428 aid = le16_to_cpu(mgmt->u.assoc_resp.aid);
3431 "RX %sssocResp from %pM (capab=0x%x status=%d aid=%d)\n",
3432 reassoc ? "Rea" : "A", mgmt->sa,
3433 capab_info, status_code, (u16)(aid & ~(BIT(15) | BIT(14))));
3435 if (assoc_data->fils_kek_len &&
3436 fils_decrypt_assoc_resp(sdata, (u8 *)mgmt, &len, assoc_data) < 0)
3439 pos = mgmt->u.assoc_resp.variable;
3440 ieee802_11_parse_elems(pos, len - (pos - (u8 *) mgmt), false, &elems);
3442 if (status_code == WLAN_STATUS_ASSOC_REJECTED_TEMPORARILY &&
3443 elems.timeout_int &&
3444 elems.timeout_int->type == WLAN_TIMEOUT_ASSOC_COMEBACK) {
3446 tu = le32_to_cpu(elems.timeout_int->value);
3447 ms = tu * 1024 / 1000;
3449 "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n",
3451 assoc_data->timeout = jiffies + msecs_to_jiffies(ms);
3452 assoc_data->timeout_started = true;
3453 if (ms > IEEE80211_ASSOC_TIMEOUT)
3454 run_again(sdata, assoc_data->timeout);
3458 bss = assoc_data->bss;
3460 if (status_code != WLAN_STATUS_SUCCESS) {
3461 sdata_info(sdata, "%pM denied association (code=%d)\n",
3462 mgmt->sa, status_code);
3463 ieee80211_destroy_assoc_data(sdata, false, false);
3464 event.u.mlme.status = MLME_DENIED;
3465 event.u.mlme.reason = status_code;
3466 drv_event_callback(sdata->local, sdata, &event);
3468 if (!ieee80211_assoc_success(sdata, bss, mgmt, len)) {
3469 /* oops -- internal error -- send timeout for now */
3470 ieee80211_destroy_assoc_data(sdata, false, false);
3471 cfg80211_assoc_timeout(sdata->dev, bss);
3474 event.u.mlme.status = MLME_SUCCESS;
3475 drv_event_callback(sdata->local, sdata, &event);
3476 sdata_info(sdata, "associated\n");
3479 * destroy assoc_data afterwards, as otherwise an idle
3480 * recalc after assoc_data is NULL but before associated
3481 * is set can cause the interface to go idle
3483 ieee80211_destroy_assoc_data(sdata, true, false);
3485 /* get uapsd queues configuration */
3487 for (ac = 0; ac < IEEE80211_NUM_ACS; ac++)
3488 if (sdata->tx_conf[ac].uapsd)
3489 uapsd_queues |= ieee80211_ac_to_qos_mask[ac];
3492 cfg80211_rx_assoc_resp(sdata->dev, bss, (u8 *)mgmt, len, uapsd_queues);
3495 static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata,
3496 struct ieee80211_mgmt *mgmt, size_t len,
3497 struct ieee80211_rx_status *rx_status,
3498 struct ieee802_11_elems *elems)
3500 struct ieee80211_local *local = sdata->local;
3501 struct ieee80211_bss *bss;
3502 struct ieee80211_channel *channel;
3504 sdata_assert_lock(sdata);
3506 channel = ieee80211_get_channel(local->hw.wiphy, rx_status->freq);
3510 bss = ieee80211_bss_info_update(local, rx_status, mgmt, len, elems,
3513 sdata->vif.bss_conf.beacon_rate = bss->beacon_rate;
3514 ieee80211_rx_bss_put(local, bss);
3519 static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata,
3520 struct sk_buff *skb)
3522 struct ieee80211_mgmt *mgmt = (void *)skb->data;
3523 struct ieee80211_if_managed *ifmgd;
3524 struct ieee80211_rx_status *rx_status = (void *) skb->cb;
3525 size_t baselen, len = skb->len;
3526 struct ieee802_11_elems elems;
3528 ifmgd = &sdata->u.mgd;
3530 sdata_assert_lock(sdata);
3532 if (!ether_addr_equal(mgmt->da, sdata->vif.addr))
3533 return; /* ignore ProbeResp to foreign address */
3535 baselen = (u8 *) mgmt->u.probe_resp.variable - (u8 *) mgmt;
3539 ieee802_11_parse_elems(mgmt->u.probe_resp.variable, len - baselen,
3542 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3544 if (ifmgd->associated &&
3545 ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3546 ieee80211_reset_ap_probe(sdata);
3550 * This is the canonical list of information elements we care about,
3551 * the filter code also gives us all changes to the Microsoft OUI
3552 * (00:50:F2) vendor IE which is used for WMM which we need to track,
3553 * as well as the DTPC IE (part of the Cisco OUI) used for signaling
3554 * changes to requested client power.
3556 * We implement beacon filtering in software since that means we can
3557 * avoid processing the frame here and in cfg80211, and userspace
3558 * will not be able to tell whether the hardware supports it or not.
3560 * XXX: This list needs to be dynamic -- userspace needs to be able to
3561 * add items it requires. It also needs to be able to tell us to
3562 * look out for other vendor IEs.
3564 static const u64 care_about_ies =
3565 (1ULL << WLAN_EID_COUNTRY) |
3566 (1ULL << WLAN_EID_ERP_INFO) |
3567 (1ULL << WLAN_EID_CHANNEL_SWITCH) |
3568 (1ULL << WLAN_EID_PWR_CONSTRAINT) |
3569 (1ULL << WLAN_EID_HT_CAPABILITY) |
3570 (1ULL << WLAN_EID_HT_OPERATION) |
3571 (1ULL << WLAN_EID_EXT_CHANSWITCH_ANN);
3573 static void ieee80211_handle_beacon_sig(struct ieee80211_sub_if_data *sdata,
3574 struct ieee80211_if_managed *ifmgd,
3575 struct ieee80211_bss_conf *bss_conf,
3576 struct ieee80211_local *local,
3577 struct ieee80211_rx_status *rx_status)
3579 /* Track average RSSI from the Beacon frames of the current AP */
3581 if (ifmgd->flags & IEEE80211_STA_RESET_SIGNAL_AVE) {
3582 ifmgd->flags &= ~IEEE80211_STA_RESET_SIGNAL_AVE;
3583 ewma_beacon_signal_init(&ifmgd->ave_beacon_signal);
3584 ifmgd->last_cqm_event_signal = 0;
3585 ifmgd->count_beacon_signal = 1;
3586 ifmgd->last_ave_beacon_signal = 0;
3588 ifmgd->count_beacon_signal++;
3591 ewma_beacon_signal_add(&ifmgd->ave_beacon_signal, -rx_status->signal);
3593 if (ifmgd->rssi_min_thold != ifmgd->rssi_max_thold &&
3594 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3595 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3596 int last_sig = ifmgd->last_ave_beacon_signal;
3597 struct ieee80211_event event = {
3602 * if signal crosses either of the boundaries, invoke callback
3603 * with appropriate parameters
3605 if (sig > ifmgd->rssi_max_thold &&
3606 (last_sig <= ifmgd->rssi_min_thold || last_sig == 0)) {
3607 ifmgd->last_ave_beacon_signal = sig;
3608 event.u.rssi.data = RSSI_EVENT_HIGH;
3609 drv_event_callback(local, sdata, &event);
3610 } else if (sig < ifmgd->rssi_min_thold &&
3611 (last_sig >= ifmgd->rssi_max_thold ||
3613 ifmgd->last_ave_beacon_signal = sig;
3614 event.u.rssi.data = RSSI_EVENT_LOW;
3615 drv_event_callback(local, sdata, &event);
3619 if (bss_conf->cqm_rssi_thold &&
3620 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT &&
3621 !(sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_CQM_RSSI)) {
3622 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3623 int last_event = ifmgd->last_cqm_event_signal;
3624 int thold = bss_conf->cqm_rssi_thold;
3625 int hyst = bss_conf->cqm_rssi_hyst;
3628 (last_event == 0 || sig < last_event - hyst)) {
3629 ifmgd->last_cqm_event_signal = sig;
3630 ieee80211_cqm_rssi_notify(
3632 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3634 } else if (sig > thold &&
3635 (last_event == 0 || sig > last_event + hyst)) {
3636 ifmgd->last_cqm_event_signal = sig;
3637 ieee80211_cqm_rssi_notify(
3639 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3644 if (bss_conf->cqm_rssi_low &&
3645 ifmgd->count_beacon_signal >= IEEE80211_SIGNAL_AVE_MIN_COUNT) {
3646 int sig = -ewma_beacon_signal_read(&ifmgd->ave_beacon_signal);
3647 int last_event = ifmgd->last_cqm_event_signal;
3648 int low = bss_conf->cqm_rssi_low;
3649 int high = bss_conf->cqm_rssi_high;
3652 (last_event == 0 || last_event >= low)) {
3653 ifmgd->last_cqm_event_signal = sig;
3654 ieee80211_cqm_rssi_notify(
3656 NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW,
3658 } else if (sig > high &&
3659 (last_event == 0 || last_event <= high)) {
3660 ifmgd->last_cqm_event_signal = sig;
3661 ieee80211_cqm_rssi_notify(
3663 NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH,
3669 static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata,
3670 struct ieee80211_mgmt *mgmt, size_t len,
3671 struct ieee80211_rx_status *rx_status)
3673 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
3674 struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf;
3676 struct ieee802_11_elems elems;
3677 struct ieee80211_local *local = sdata->local;
3678 struct ieee80211_chanctx_conf *chanctx_conf;
3679 struct ieee80211_channel *chan;
3680 struct sta_info *sta;
3686 u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN];
3688 sdata_assert_lock(sdata);
3690 /* Process beacon from the current BSS */
3691 baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt;
3696 chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
3697 if (!chanctx_conf) {
3702 if (rx_status->freq != chanctx_conf->def.chan->center_freq) {
3706 chan = chanctx_conf->def.chan;
3709 if (ifmgd->assoc_data && ifmgd->assoc_data->need_beacon &&
3710 ether_addr_equal(mgmt->bssid, ifmgd->assoc_data->bss->bssid)) {
3711 ieee802_11_parse_elems(mgmt->u.beacon.variable,
3712 len - baselen, false, &elems);
3714 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3715 if (elems.tim && !elems.parse_error) {
3716 const struct ieee80211_tim_ie *tim_ie = elems.tim;
3717 ifmgd->dtim_period = tim_ie->dtim_period;
3719 ifmgd->have_beacon = true;
3720 ifmgd->assoc_data->need_beacon = false;
3721 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3722 sdata->vif.bss_conf.sync_tsf =
3723 le64_to_cpu(mgmt->u.beacon.timestamp);
3724 sdata->vif.bss_conf.sync_device_ts =
3725 rx_status->device_timestamp;
3727 sdata->vif.bss_conf.sync_dtim_count =
3728 elems.tim->dtim_count;
3730 sdata->vif.bss_conf.sync_dtim_count = 0;
3732 /* continue assoc process */
3733 ifmgd->assoc_data->timeout = jiffies;
3734 ifmgd->assoc_data->timeout_started = true;
3735 run_again(sdata, ifmgd->assoc_data->timeout);
3739 if (!ifmgd->associated ||
3740 !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid))
3742 bssid = ifmgd->associated->bssid;
3744 if (!(rx_status->flag & RX_FLAG_NO_SIGNAL_VAL))
3745 ieee80211_handle_beacon_sig(sdata, ifmgd, bss_conf,
3748 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL) {
3749 mlme_dbg_ratelimited(sdata,
3750 "cancelling AP probe due to a received beacon\n");
3751 ieee80211_reset_ap_probe(sdata);
3755 * Push the beacon loss detection into the future since
3756 * we are processing a beacon from the AP just now.
3758 ieee80211_sta_reset_beacon_monitor(sdata);
3760 ncrc = crc32_be(0, (void *)&mgmt->u.beacon.beacon_int, 4);
3761 ncrc = ieee802_11_parse_elems_crc(mgmt->u.beacon.variable,
3762 len - baselen, false, &elems,
3763 care_about_ies, ncrc);
3765 if (ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK) &&
3766 ieee80211_check_tim(elems.tim, elems.tim_len, ifmgd->aid)) {
3767 if (local->hw.conf.dynamic_ps_timeout > 0) {
3768 if (local->hw.conf.flags & IEEE80211_CONF_PS) {
3769 local->hw.conf.flags &= ~IEEE80211_CONF_PS;
3770 ieee80211_hw_config(local,
3771 IEEE80211_CONF_CHANGE_PS);
3773 ieee80211_send_nullfunc(local, sdata, false);
3774 } else if (!local->pspolling && sdata->u.mgd.powersave) {
3775 local->pspolling = true;
3778 * Here is assumed that the driver will be
3779 * able to send ps-poll frame and receive a
3780 * response even though power save mode is
3781 * enabled, but some drivers might require
3782 * to disable power save here. This needs
3783 * to be investigated.
3785 ieee80211_send_pspoll(local, sdata);
3789 if (sdata->vif.p2p ||
3790 sdata->vif.driver_flags & IEEE80211_VIF_GET_NOA_UPDATE) {
3791 struct ieee80211_p2p_noa_attr noa = {};
3794 ret = cfg80211_get_p2p_attr(mgmt->u.beacon.variable,
3796 IEEE80211_P2P_ATTR_ABSENCE_NOTICE,
3797 (u8 *) &noa, sizeof(noa));
3799 if (sdata->u.mgd.p2p_noa_index != noa.index) {
3800 /* valid noa_attr and index changed */
3801 sdata->u.mgd.p2p_noa_index = noa.index;
3802 memcpy(&bss_conf->p2p_noa_attr, &noa, sizeof(noa));
3803 changed |= BSS_CHANGED_P2P_PS;
3805 * make sure we update all information, the CRC
3806 * mechanism doesn't look at P2P attributes.
3808 ifmgd->beacon_crc_valid = false;
3810 } else if (sdata->u.mgd.p2p_noa_index != -1) {
3811 /* noa_attr not found and we had valid noa_attr before */
3812 sdata->u.mgd.p2p_noa_index = -1;
3813 memset(&bss_conf->p2p_noa_attr, 0, sizeof(bss_conf->p2p_noa_attr));
3814 changed |= BSS_CHANGED_P2P_PS;
3815 ifmgd->beacon_crc_valid = false;
3819 if (ifmgd->csa_waiting_bcn)
3820 ieee80211_chswitch_post_beacon(sdata);
3823 * Update beacon timing and dtim count on every beacon appearance. This
3824 * will allow the driver to use the most updated values. Do it before
3825 * comparing this one with last received beacon.
3826 * IMPORTANT: These parameters would possibly be out of sync by the time
3827 * the driver will use them. The synchronized view is currently
3828 * guaranteed only in certain callbacks.
3830 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
3831 sdata->vif.bss_conf.sync_tsf =
3832 le64_to_cpu(mgmt->u.beacon.timestamp);
3833 sdata->vif.bss_conf.sync_device_ts =
3834 rx_status->device_timestamp;
3836 sdata->vif.bss_conf.sync_dtim_count =
3837 elems.tim->dtim_count;
3839 sdata->vif.bss_conf.sync_dtim_count = 0;
3842 if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid)
3844 ifmgd->beacon_crc = ncrc;
3845 ifmgd->beacon_crc_valid = true;
3847 ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems);
3849 ieee80211_sta_process_chanswitch(sdata, rx_status->mactime,
3850 rx_status->device_timestamp,
3853 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_WMM) &&
3854 ieee80211_sta_wmm_params(local, sdata, elems.wmm_param,
3855 elems.wmm_param_len,
3856 elems.mu_edca_param_set))
3857 changed |= BSS_CHANGED_QOS;
3860 * If we haven't had a beacon before, tell the driver about the
3861 * DTIM period (and beacon timing if desired) now.
3863 if (!ifmgd->have_beacon) {
3864 /* a few bogus AP send dtim_period = 0 or no TIM IE */
3866 bss_conf->dtim_period = elems.tim->dtim_period ?: 1;
3868 bss_conf->dtim_period = 1;
3870 changed |= BSS_CHANGED_BEACON_INFO;
3871 ifmgd->have_beacon = true;
3873 mutex_lock(&local->iflist_mtx);
3874 ieee80211_recalc_ps(local);
3875 mutex_unlock(&local->iflist_mtx);
3877 ieee80211_recalc_ps_vif(sdata);
3880 if (elems.erp_info) {
3882 erp_value = elems.erp_info[0];
3886 changed |= ieee80211_handle_bss_capability(sdata,
3887 le16_to_cpu(mgmt->u.beacon.capab_info),
3888 erp_valid, erp_value);
3890 mutex_lock(&local->sta_mtx);
3891 sta = sta_info_get(sdata, bssid);
3893 if (ieee80211_config_bw(sdata, sta,
3894 elems.ht_cap_elem, elems.ht_operation,
3895 elems.vht_operation, elems.he_operation,
3897 mutex_unlock(&local->sta_mtx);
3899 "failed to follow AP %pM bandwidth change, disconnect\n",
3901 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
3902 WLAN_REASON_DEAUTH_LEAVING,
3904 ieee80211_report_disconnect(sdata, deauth_buf,
3905 sizeof(deauth_buf), true,
3906 WLAN_REASON_DEAUTH_LEAVING);
3910 if (sta && elems.opmode_notif)
3911 ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif,
3913 mutex_unlock(&local->sta_mtx);
3915 changed |= ieee80211_handle_pwr_constr(sdata, chan, mgmt,
3917 elems.country_elem_len,
3918 elems.pwr_constr_elem,
3919 elems.cisco_dtpc_elem);
3921 ieee80211_bss_info_change_notify(sdata, changed);
3924 void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata,
3925 struct sk_buff *skb)
3927 struct ieee80211_rx_status *rx_status;
3928 struct ieee80211_mgmt *mgmt;
3930 struct ieee802_11_elems elems;
3933 rx_status = (struct ieee80211_rx_status *) skb->cb;
3934 mgmt = (struct ieee80211_mgmt *) skb->data;
3935 fc = le16_to_cpu(mgmt->frame_control);
3939 switch (fc & IEEE80211_FCTL_STYPE) {
3940 case IEEE80211_STYPE_BEACON:
3941 ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status);
3943 case IEEE80211_STYPE_PROBE_RESP:
3944 ieee80211_rx_mgmt_probe_resp(sdata, skb);
3946 case IEEE80211_STYPE_AUTH:
3947 ieee80211_rx_mgmt_auth(sdata, mgmt, skb->len);
3949 case IEEE80211_STYPE_DEAUTH:
3950 ieee80211_rx_mgmt_deauth(sdata, mgmt, skb->len);
3952 case IEEE80211_STYPE_DISASSOC:
3953 ieee80211_rx_mgmt_disassoc(sdata, mgmt, skb->len);
3955 case IEEE80211_STYPE_ASSOC_RESP:
3956 case IEEE80211_STYPE_REASSOC_RESP:
3957 ieee80211_rx_mgmt_assoc_resp(sdata, mgmt, skb->len);
3959 case IEEE80211_STYPE_ACTION:
3960 if (mgmt->u.action.category == WLAN_CATEGORY_SPECTRUM_MGMT) {
3961 ies_len = skb->len -
3962 offsetof(struct ieee80211_mgmt,
3963 u.action.u.chan_switch.variable);
3968 ieee802_11_parse_elems(
3969 mgmt->u.action.u.chan_switch.variable,
3970 ies_len, true, &elems);
3972 if (elems.parse_error)
3975 ieee80211_sta_process_chanswitch(sdata,
3977 rx_status->device_timestamp,
3979 } else if (mgmt->u.action.category == WLAN_CATEGORY_PUBLIC) {
3980 ies_len = skb->len -
3981 offsetof(struct ieee80211_mgmt,
3982 u.action.u.ext_chan_switch.variable);
3987 ieee802_11_parse_elems(
3988 mgmt->u.action.u.ext_chan_switch.variable,
3989 ies_len, true, &elems);
3991 if (elems.parse_error)
3994 /* for the handling code pretend this was also an IE */
3995 elems.ext_chansw_ie =
3996 &mgmt->u.action.u.ext_chan_switch.data;
3998 ieee80211_sta_process_chanswitch(sdata,
4000 rx_status->device_timestamp,
4005 sdata_unlock(sdata);
4008 static void ieee80211_sta_timer(struct timer_list *t)
4010 struct ieee80211_sub_if_data *sdata =
4011 from_timer(sdata, t, u.mgd.timer);
4013 ieee80211_queue_work(&sdata->local->hw, &sdata->work);
4016 static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata,
4017 u8 *bssid, u8 reason, bool tx)
4019 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4021 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, reason,
4024 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
4028 static int ieee80211_auth(struct ieee80211_sub_if_data *sdata)
4030 struct ieee80211_local *local = sdata->local;
4031 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4032 struct ieee80211_mgd_auth_data *auth_data = ifmgd->auth_data;
4036 u16 prepare_tx_duration = 0;
4038 sdata_assert_lock(sdata);
4040 if (WARN_ON_ONCE(!auth_data))
4045 if (auth_data->tries > IEEE80211_AUTH_MAX_TRIES) {
4046 sdata_info(sdata, "authentication with %pM timed out\n",
4047 auth_data->bss->bssid);
4050 * Most likely AP is not in the range so remove the
4051 * bss struct for that AP.
4053 cfg80211_unlink_bss(local->hw.wiphy, auth_data->bss);
4058 if (auth_data->algorithm == WLAN_AUTH_SAE)
4059 prepare_tx_duration =
4060 jiffies_to_msecs(IEEE80211_AUTH_TIMEOUT_SAE);
4062 drv_mgd_prepare_tx(local, sdata, prepare_tx_duration);
4064 sdata_info(sdata, "send auth to %pM (try %d/%d)\n",
4065 auth_data->bss->bssid, auth_data->tries,
4066 IEEE80211_AUTH_MAX_TRIES);
4068 auth_data->expected_transaction = 2;
4070 if (auth_data->algorithm == WLAN_AUTH_SAE) {
4071 trans = auth_data->sae_trans;
4072 status = auth_data->sae_status;
4073 auth_data->expected_transaction = trans;
4076 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
4077 tx_flags = IEEE80211_TX_CTL_REQ_TX_STATUS |
4078 IEEE80211_TX_INTFL_MLME_CONN_TX;
4080 ieee80211_send_auth(sdata, trans, auth_data->algorithm, status,
4081 auth_data->data, auth_data->data_len,
4082 auth_data->bss->bssid,
4083 auth_data->bss->bssid, NULL, 0, 0,
4086 if (tx_flags == 0) {
4087 if (auth_data->algorithm == WLAN_AUTH_SAE)
4088 auth_data->timeout = jiffies +
4089 IEEE80211_AUTH_TIMEOUT_SAE;
4091 auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT;
4093 auth_data->timeout =
4094 round_jiffies_up(jiffies + IEEE80211_AUTH_TIMEOUT_LONG);
4097 auth_data->timeout_started = true;
4098 run_again(sdata, auth_data->timeout);
4103 static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata)
4105 struct ieee80211_mgd_assoc_data *assoc_data = sdata->u.mgd.assoc_data;
4106 struct ieee80211_local *local = sdata->local;
4108 sdata_assert_lock(sdata);
4110 assoc_data->tries++;
4111 if (assoc_data->tries > IEEE80211_ASSOC_MAX_TRIES) {
4112 sdata_info(sdata, "association with %pM timed out\n",
4113 assoc_data->bss->bssid);
4116 * Most likely AP is not in the range so remove the
4117 * bss struct for that AP.
4119 cfg80211_unlink_bss(local->hw.wiphy, assoc_data->bss);
4124 sdata_info(sdata, "associate with %pM (try %d/%d)\n",
4125 assoc_data->bss->bssid, assoc_data->tries,
4126 IEEE80211_ASSOC_MAX_TRIES);
4127 ieee80211_send_assoc(sdata);
4129 if (!ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
4130 assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT;
4131 assoc_data->timeout_started = true;
4132 run_again(sdata, assoc_data->timeout);
4134 assoc_data->timeout =
4135 round_jiffies_up(jiffies +
4136 IEEE80211_ASSOC_TIMEOUT_LONG);
4137 assoc_data->timeout_started = true;
4138 run_again(sdata, assoc_data->timeout);
4144 void ieee80211_mgd_conn_tx_status(struct ieee80211_sub_if_data *sdata,
4145 __le16 fc, bool acked)
4147 struct ieee80211_local *local = sdata->local;
4149 sdata->u.mgd.status_fc = fc;
4150 sdata->u.mgd.status_acked = acked;
4151 sdata->u.mgd.status_received = true;
4153 ieee80211_queue_work(&local->hw, &sdata->work);
4156 void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata)
4158 struct ieee80211_local *local = sdata->local;
4159 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4163 if (ifmgd->status_received) {
4164 __le16 fc = ifmgd->status_fc;
4165 bool status_acked = ifmgd->status_acked;
4167 ifmgd->status_received = false;
4168 if (ifmgd->auth_data && ieee80211_is_auth(fc)) {
4170 if (ifmgd->auth_data->algorithm ==
4172 ifmgd->auth_data->timeout =
4174 IEEE80211_AUTH_TIMEOUT_SAE;
4176 ifmgd->auth_data->timeout =
4178 IEEE80211_AUTH_TIMEOUT_SHORT;
4179 run_again(sdata, ifmgd->auth_data->timeout);
4181 ifmgd->auth_data->timeout = jiffies - 1;
4183 ifmgd->auth_data->timeout_started = true;
4184 } else if (ifmgd->assoc_data &&
4185 (ieee80211_is_assoc_req(fc) ||
4186 ieee80211_is_reassoc_req(fc))) {
4188 ifmgd->assoc_data->timeout =
4189 jiffies + IEEE80211_ASSOC_TIMEOUT_SHORT;
4190 run_again(sdata, ifmgd->assoc_data->timeout);
4192 ifmgd->assoc_data->timeout = jiffies - 1;
4194 ifmgd->assoc_data->timeout_started = true;
4198 if (ifmgd->auth_data && ifmgd->auth_data->timeout_started &&
4199 time_after(jiffies, ifmgd->auth_data->timeout)) {
4200 if (ifmgd->auth_data->done) {
4202 * ok ... we waited for assoc but userspace didn't,
4203 * so let's just kill the auth data
4205 ieee80211_destroy_auth_data(sdata, false);
4206 } else if (ieee80211_auth(sdata)) {
4208 struct ieee80211_event event = {
4210 .u.mlme.data = AUTH_EVENT,
4211 .u.mlme.status = MLME_TIMEOUT,
4214 memcpy(bssid, ifmgd->auth_data->bss->bssid, ETH_ALEN);
4216 ieee80211_destroy_auth_data(sdata, false);
4218 cfg80211_auth_timeout(sdata->dev, bssid);
4219 drv_event_callback(sdata->local, sdata, &event);
4221 } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started)
4222 run_again(sdata, ifmgd->auth_data->timeout);
4224 if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started &&
4225 time_after(jiffies, ifmgd->assoc_data->timeout)) {
4226 if ((ifmgd->assoc_data->need_beacon && !ifmgd->have_beacon) ||
4227 ieee80211_do_assoc(sdata)) {
4228 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
4229 struct ieee80211_event event = {
4231 .u.mlme.data = ASSOC_EVENT,
4232 .u.mlme.status = MLME_TIMEOUT,
4235 ieee80211_destroy_assoc_data(sdata, false, false);
4236 cfg80211_assoc_timeout(sdata->dev, bss);
4237 drv_event_callback(sdata->local, sdata, &event);
4239 } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started)
4240 run_again(sdata, ifmgd->assoc_data->timeout);
4242 if (ifmgd->flags & IEEE80211_STA_CONNECTION_POLL &&
4243 ifmgd->associated) {
4247 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
4249 if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS))
4250 max_tries = max_nullfunc_tries;
4252 max_tries = max_probe_tries;
4254 /* ACK received for nullfunc probing frame */
4255 if (!ifmgd->probe_send_count)
4256 ieee80211_reset_ap_probe(sdata);
4257 else if (ifmgd->nullfunc_failed) {
4258 if (ifmgd->probe_send_count < max_tries) {
4260 "No ack for nullfunc frame to AP %pM, try %d/%i\n",
4261 bssid, ifmgd->probe_send_count,
4263 ieee80211_mgd_probe_ap_send(sdata);
4266 "No ack for nullfunc frame to AP %pM, disconnecting.\n",
4268 ieee80211_sta_connection_lost(sdata, bssid,
4269 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY,
4272 } else if (time_is_after_jiffies(ifmgd->probe_timeout))
4273 run_again(sdata, ifmgd->probe_timeout);
4274 else if (ieee80211_hw_check(&local->hw, REPORTS_TX_ACK_STATUS)) {
4276 "Failed to send nullfunc to AP %pM after %dms, disconnecting\n",
4277 bssid, probe_wait_ms);
4278 ieee80211_sta_connection_lost(sdata, bssid,
4279 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
4280 } else if (ifmgd->probe_send_count < max_tries) {
4282 "No probe response from AP %pM after %dms, try %d/%i\n",
4283 bssid, probe_wait_ms,
4284 ifmgd->probe_send_count, max_tries);
4285 ieee80211_mgd_probe_ap_send(sdata);
4288 * We actually lost the connection ... or did we?
4292 "No probe response from AP %pM after %dms, disconnecting.\n",
4293 bssid, probe_wait_ms);
4295 ieee80211_sta_connection_lost(sdata, bssid,
4296 WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, false);
4300 sdata_unlock(sdata);
4303 static void ieee80211_sta_bcn_mon_timer(struct timer_list *t)
4305 struct ieee80211_sub_if_data *sdata =
4306 from_timer(sdata, t, u.mgd.bcn_mon_timer);
4307 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4309 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
4312 sdata->u.mgd.connection_loss = false;
4313 ieee80211_queue_work(&sdata->local->hw,
4314 &sdata->u.mgd.beacon_connection_loss_work);
4317 static void ieee80211_sta_conn_mon_timer(struct timer_list *t)
4319 struct ieee80211_sub_if_data *sdata =
4320 from_timer(sdata, t, u.mgd.conn_mon_timer);
4321 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4322 struct ieee80211_local *local = sdata->local;
4324 if (sdata->vif.csa_active && !ifmgd->csa_waiting_bcn)
4327 ieee80211_queue_work(&local->hw, &ifmgd->monitor_work);
4330 static void ieee80211_sta_monitor_work(struct work_struct *work)
4332 struct ieee80211_sub_if_data *sdata =
4333 container_of(work, struct ieee80211_sub_if_data,
4334 u.mgd.monitor_work);
4336 ieee80211_mgd_probe_ap(sdata, false);
4339 static void ieee80211_restart_sta_timer(struct ieee80211_sub_if_data *sdata)
4341 if (sdata->vif.type == NL80211_IFTYPE_STATION) {
4342 __ieee80211_stop_poll(sdata);
4344 /* let's probe the connection once */
4345 if (!ieee80211_hw_check(&sdata->local->hw, CONNECTION_MONITOR))
4346 ieee80211_queue_work(&sdata->local->hw,
4347 &sdata->u.mgd.monitor_work);
4352 void ieee80211_mgd_quiesce(struct ieee80211_sub_if_data *sdata)
4354 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4355 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4359 if (ifmgd->auth_data || ifmgd->assoc_data) {
4360 const u8 *bssid = ifmgd->auth_data ?
4361 ifmgd->auth_data->bss->bssid :
4362 ifmgd->assoc_data->bss->bssid;
4365 * If we are trying to authenticate / associate while suspending,
4366 * cfg80211 won't know and won't actually abort those attempts,
4367 * thus we need to do that ourselves.
4369 ieee80211_send_deauth_disassoc(sdata, bssid,
4370 IEEE80211_STYPE_DEAUTH,
4371 WLAN_REASON_DEAUTH_LEAVING,
4373 if (ifmgd->assoc_data)
4374 ieee80211_destroy_assoc_data(sdata, false, true);
4375 if (ifmgd->auth_data)
4376 ieee80211_destroy_auth_data(sdata, false);
4377 cfg80211_tx_mlme_mgmt(sdata->dev, frame_buf,
4378 IEEE80211_DEAUTH_FRAME_LEN);
4381 /* This is a bit of a hack - we should find a better and more generic
4382 * solution to this. Normally when suspending, cfg80211 will in fact
4383 * deauthenticate. However, it doesn't (and cannot) stop an ongoing
4384 * auth (not so important) or assoc (this is the problem) process.
4386 * As a consequence, it can happen that we are in the process of both
4387 * associating and suspending, and receive an association response
4388 * after cfg80211 has checked if it needs to disconnect, but before
4389 * we actually set the flag to drop incoming frames. This will then
4390 * cause the workqueue flush to process the association response in
4391 * the suspend, resulting in a successful association just before it
4392 * tries to remove the interface from the driver, which now though
4393 * has a channel context assigned ... this results in issues.
4395 * To work around this (for now) simply deauth here again if we're
4398 if (ifmgd->associated && !sdata->local->wowlan) {
4400 struct cfg80211_deauth_request req = {
4401 .reason_code = WLAN_REASON_DEAUTH_LEAVING,
4405 memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN);
4406 ieee80211_mgd_deauth(sdata, &req);
4409 sdata_unlock(sdata);
4412 void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata)
4414 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4417 if (!ifmgd->associated) {
4418 sdata_unlock(sdata);
4422 if (sdata->flags & IEEE80211_SDATA_DISCONNECT_RESUME) {
4423 sdata->flags &= ~IEEE80211_SDATA_DISCONNECT_RESUME;
4424 mlme_dbg(sdata, "driver requested disconnect after resume\n");
4425 ieee80211_sta_connection_lost(sdata,
4426 ifmgd->associated->bssid,
4427 WLAN_REASON_UNSPECIFIED,
4429 sdata_unlock(sdata);
4432 sdata_unlock(sdata);
4436 /* interface setup */
4437 void ieee80211_sta_setup_sdata(struct ieee80211_sub_if_data *sdata)
4439 struct ieee80211_if_managed *ifmgd;
4441 ifmgd = &sdata->u.mgd;
4442 INIT_WORK(&ifmgd->monitor_work, ieee80211_sta_monitor_work);
4443 INIT_WORK(&ifmgd->chswitch_work, ieee80211_chswitch_work);
4444 INIT_WORK(&ifmgd->beacon_connection_loss_work,
4445 ieee80211_beacon_connection_loss_work);
4446 INIT_WORK(&ifmgd->csa_connection_drop_work,
4447 ieee80211_csa_connection_drop_work);
4448 INIT_WORK(&ifmgd->request_smps_work, ieee80211_request_smps_mgd_work);
4449 INIT_DELAYED_WORK(&ifmgd->tdls_peer_del_work,
4450 ieee80211_tdls_peer_del_work);
4451 timer_setup(&ifmgd->timer, ieee80211_sta_timer, 0);
4452 timer_setup(&ifmgd->bcn_mon_timer, ieee80211_sta_bcn_mon_timer, 0);
4453 timer_setup(&ifmgd->conn_mon_timer, ieee80211_sta_conn_mon_timer, 0);
4454 timer_setup(&ifmgd->chswitch_timer, ieee80211_chswitch_timer, 0);
4455 INIT_DELAYED_WORK(&ifmgd->tx_tspec_wk,
4456 ieee80211_sta_handle_tspec_ac_params_wk);
4459 ifmgd->powersave = sdata->wdev.ps;
4460 ifmgd->uapsd_queues = sdata->local->hw.uapsd_queues;
4461 ifmgd->uapsd_max_sp_len = sdata->local->hw.uapsd_max_sp_len;
4462 ifmgd->p2p_noa_index = -1;
4464 if (sdata->local->hw.wiphy->features & NL80211_FEATURE_DYNAMIC_SMPS)
4465 ifmgd->req_smps = IEEE80211_SMPS_AUTOMATIC;
4467 ifmgd->req_smps = IEEE80211_SMPS_OFF;
4469 /* Setup TDLS data */
4470 spin_lock_init(&ifmgd->teardown_lock);
4471 ifmgd->teardown_skb = NULL;
4472 ifmgd->orig_teardown_skb = NULL;
4475 /* scan finished notification */
4476 void ieee80211_mlme_notify_scan_completed(struct ieee80211_local *local)
4478 struct ieee80211_sub_if_data *sdata;
4480 /* Restart STA timers */
4482 list_for_each_entry_rcu(sdata, &local->interfaces, list) {
4483 if (ieee80211_sdata_running(sdata))
4484 ieee80211_restart_sta_timer(sdata);
4489 static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata,
4490 struct cfg80211_bss *cbss)
4492 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4493 const u8 *ht_cap_ie, *vht_cap_ie;
4494 const struct ieee80211_ht_cap *ht_cap;
4495 const struct ieee80211_vht_cap *vht_cap;
4498 if (ifmgd->flags & IEEE80211_STA_DISABLE_HT)
4501 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4502 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap)) {
4503 ht_cap = (void *)(ht_cap_ie + 2);
4504 chains = ieee80211_mcs_to_chains(&ht_cap->mcs);
4506 * TODO: use "Tx Maximum Number Spatial Streams Supported" and
4507 * "Tx Unequal Modulation Supported" fields.
4511 if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT)
4514 vht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4515 if (vht_cap_ie && vht_cap_ie[1] >= sizeof(*vht_cap)) {
4519 vht_cap = (void *)(vht_cap_ie + 2);
4520 tx_mcs_map = le16_to_cpu(vht_cap->supp_mcs.tx_mcs_map);
4521 for (nss = 8; nss > 0; nss--) {
4522 if (((tx_mcs_map >> (2 * (nss - 1))) & 3) !=
4523 IEEE80211_VHT_MCS_NOT_SUPPORTED)
4526 /* TODO: use "Tx Highest Supported Long GI Data Rate" field? */
4527 chains = max(chains, nss);
4534 ieee80211_verify_sta_he_mcs_support(struct ieee80211_supported_band *sband,
4535 const struct ieee80211_he_operation *he_op)
4537 const struct ieee80211_sta_he_cap *sta_he_cap =
4538 ieee80211_get_he_sta_cap(sband);
4542 if (!sta_he_cap || !he_op)
4545 ap_min_req_set = le16_to_cpu(he_op->he_mcs_nss_set);
4547 /* Need to go over for 80MHz, 160MHz and for 80+80 */
4548 for (i = 0; i < 3; i++) {
4549 const struct ieee80211_he_mcs_nss_supp *sta_mcs_nss_supp =
4550 &sta_he_cap->he_mcs_nss_supp;
4551 u16 sta_mcs_map_rx =
4552 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i]);
4553 u16 sta_mcs_map_tx =
4554 le16_to_cpu(((__le16 *)sta_mcs_nss_supp)[2 * i + 1]);
4556 bool verified = true;
4559 * For each band there is a maximum of 8 spatial streams
4560 * possible. Each of the sta_mcs_map_* is a 16-bit struct built
4561 * of 2 bits per NSS (1-8), with the values defined in enum
4562 * ieee80211_he_mcs_support. Need to make sure STA TX and RX
4563 * capabilities aren't less than the AP's minimum requirements
4564 * for this HE BSS per SS.
4565 * It is enough to find one such band that meets the reqs.
4567 for (nss = 8; nss > 0; nss--) {
4568 u8 sta_rx_val = (sta_mcs_map_rx >> (2 * (nss - 1))) & 3;
4569 u8 sta_tx_val = (sta_mcs_map_tx >> (2 * (nss - 1))) & 3;
4570 u8 ap_val = (ap_min_req_set >> (2 * (nss - 1))) & 3;
4572 if (ap_val == IEEE80211_HE_MCS_NOT_SUPPORTED)
4576 * Make sure the HE AP doesn't require MCSs that aren't
4577 * supported by the client
4579 if (sta_rx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4580 sta_tx_val == IEEE80211_HE_MCS_NOT_SUPPORTED ||
4581 (ap_val > sta_rx_val) || (ap_val > sta_tx_val)) {
4591 /* If here, STA doesn't meet AP's HE min requirements */
4595 static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata,
4596 struct cfg80211_bss *cbss)
4598 struct ieee80211_local *local = sdata->local;
4599 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4600 const struct ieee80211_ht_cap *ht_cap = NULL;
4601 const struct ieee80211_ht_operation *ht_oper = NULL;
4602 const struct ieee80211_vht_operation *vht_oper = NULL;
4603 const struct ieee80211_he_operation *he_oper = NULL;
4604 struct ieee80211_supported_band *sband;
4605 struct cfg80211_chan_def chandef;
4610 sband = local->hw.wiphy->bands[cbss->channel->band];
4612 ifmgd->flags &= ~(IEEE80211_STA_DISABLE_40MHZ |
4613 IEEE80211_STA_DISABLE_80P80MHZ |
4614 IEEE80211_STA_DISABLE_160MHZ);
4618 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) &&
4619 sband->ht_cap.ht_supported) {
4620 const u8 *ht_oper_ie, *ht_cap_ie;
4622 ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION);
4623 if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper))
4624 ht_oper = (void *)(ht_oper_ie + 2);
4626 ht_cap_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY);
4627 if (ht_cap_ie && ht_cap_ie[1] >= sizeof(*ht_cap))
4628 ht_cap = (void *)(ht_cap_ie + 2);
4631 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4636 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
4637 sband->vht_cap.vht_supported) {
4638 const u8 *vht_oper_ie, *vht_cap;
4640 vht_oper_ie = ieee80211_bss_get_ie(cbss,
4641 WLAN_EID_VHT_OPERATION);
4642 if (vht_oper_ie && vht_oper_ie[1] >= sizeof(*vht_oper))
4643 vht_oper = (void *)(vht_oper_ie + 2);
4644 if (vht_oper && !ht_oper) {
4647 "AP advertised VHT without HT, disabling both\n");
4648 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
4649 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4652 vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY);
4653 if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) {
4654 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4659 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HE) &&
4660 ieee80211_get_he_sta_cap(sband)) {
4661 const struct cfg80211_bss_ies *ies;
4662 const u8 *he_oper_ie;
4664 ies = rcu_dereference(cbss->ies);
4665 he_oper_ie = cfg80211_find_ext_ie(WLAN_EID_EXT_HE_OPERATION,
4666 ies->data, ies->len);
4668 he_oper_ie[1] == ieee80211_he_oper_size(&he_oper_ie[3]))
4669 he_oper = (void *)(he_oper_ie + 3);
4673 if (!ieee80211_verify_sta_he_mcs_support(sband, he_oper))
4674 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
4677 /* Allow VHT if at least one channel on the sband supports 80 MHz */
4679 for (i = 0; i < sband->n_channels; i++) {
4680 if (sband->channels[i].flags & (IEEE80211_CHAN_DISABLED |
4681 IEEE80211_CHAN_NO_80MHZ))
4689 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
4691 ifmgd->flags |= ieee80211_determine_chantype(sdata, sband,
4693 ht_oper, vht_oper, he_oper,
4696 sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss),
4701 /* will change later if needed */
4702 sdata->smps_mode = IEEE80211_SMPS_OFF;
4704 mutex_lock(&local->mtx);
4706 * If this fails (possibly due to channel context sharing
4707 * on incompatible channels, e.g. 80+80 and 160 sharing the
4708 * same control channel) try to use a smaller bandwidth.
4710 ret = ieee80211_vif_use_channel(sdata, &chandef,
4711 IEEE80211_CHANCTX_SHARED);
4713 /* don't downgrade for 5 and 10 MHz channels, though. */
4714 if (chandef.width == NL80211_CHAN_WIDTH_5 ||
4715 chandef.width == NL80211_CHAN_WIDTH_10)
4718 while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) {
4719 ifmgd->flags |= ieee80211_chandef_downgrade(&chandef);
4720 ret = ieee80211_vif_use_channel(sdata, &chandef,
4721 IEEE80211_CHANCTX_SHARED);
4724 mutex_unlock(&local->mtx);
4728 static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata,
4729 struct cfg80211_bss *cbss, bool assoc,
4732 struct ieee80211_local *local = sdata->local;
4733 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4734 struct ieee80211_bss *bss = (void *)cbss->priv;
4735 struct sta_info *new_sta = NULL;
4736 struct ieee80211_supported_band *sband;
4737 bool have_sta = false;
4740 sband = local->hw.wiphy->bands[cbss->channel->band];
4742 if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data))
4745 /* If a reconfig is happening, bail out */
4746 if (local->in_reconfig)
4751 have_sta = sta_info_get(sdata, cbss->bssid);
4756 new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL);
4762 * Set up the information for the new channel before setting the
4763 * new channel. We can't - completely race-free - change the basic
4764 * rates bitmap and the channel (sband) that it refers to, but if
4765 * we set it up before we at least avoid calling into the driver's
4766 * bss_info_changed() method with invalid information (since we do
4767 * call that from changing the channel - only for IDLE and perhaps
4768 * some others, but ...).
4770 * So to avoid that, just set up all the new information before the
4771 * channel, but tell the driver to apply it only afterwards, since
4772 * it might need the new channel for that.
4775 u32 rates = 0, basic_rates = 0;
4776 bool have_higher_than_11mbit;
4777 int min_rate = INT_MAX, min_rate_index = -1;
4778 const struct cfg80211_bss_ies *ies;
4779 int shift = ieee80211_vif_get_shift(&sdata->vif);
4781 ieee80211_get_rates(sband, bss->supp_rates,
4782 bss->supp_rates_len,
4783 &rates, &basic_rates,
4784 &have_higher_than_11mbit,
4785 &min_rate, &min_rate_index,
4789 * This used to be a workaround for basic rates missing
4790 * in the association response frame. Now that we no
4791 * longer use the basic rates from there, it probably
4792 * doesn't happen any more, but keep the workaround so
4793 * in case some *other* APs are buggy in different ways
4794 * we can connect -- with a warning.
4796 if (!basic_rates && min_rate_index >= 0) {
4798 "No basic rates, using min rate instead\n");
4799 basic_rates = BIT(min_rate_index);
4802 new_sta->sta.supp_rates[cbss->channel->band] = rates;
4803 sdata->vif.bss_conf.basic_rates = basic_rates;
4805 /* cf. IEEE 802.11 9.2.12 */
4806 if (cbss->channel->band == NL80211_BAND_2GHZ &&
4807 have_higher_than_11mbit)
4808 sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE;
4810 sdata->flags &= ~IEEE80211_SDATA_OPERATING_GMODE;
4812 memcpy(ifmgd->bssid, cbss->bssid, ETH_ALEN);
4814 /* set timing information */
4815 sdata->vif.bss_conf.beacon_int = cbss->beacon_interval;
4817 ies = rcu_dereference(cbss->beacon_ies);
4821 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4822 sdata->vif.bss_conf.sync_device_ts =
4823 bss->device_ts_beacon;
4824 tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
4825 ies->data, ies->len);
4826 if (tim_ie && tim_ie[1] >= 2)
4827 sdata->vif.bss_conf.sync_dtim_count = tim_ie[2];
4829 sdata->vif.bss_conf.sync_dtim_count = 0;
4830 } else if (!ieee80211_hw_check(&sdata->local->hw,
4831 TIMING_BEACON_ONLY)) {
4832 ies = rcu_dereference(cbss->proberesp_ies);
4833 /* must be non-NULL since beacon IEs were NULL */
4834 sdata->vif.bss_conf.sync_tsf = ies->tsf;
4835 sdata->vif.bss_conf.sync_device_ts =
4836 bss->device_ts_presp;
4837 sdata->vif.bss_conf.sync_dtim_count = 0;
4839 sdata->vif.bss_conf.sync_tsf = 0;
4840 sdata->vif.bss_conf.sync_device_ts = 0;
4841 sdata->vif.bss_conf.sync_dtim_count = 0;
4846 if (new_sta || override) {
4847 err = ieee80211_prep_channel(sdata, cbss);
4850 sta_info_free(local, new_sta);
4857 * tell driver about BSSID, basic rates and timing
4858 * this was set up above, before setting the channel
4860 ieee80211_bss_info_change_notify(sdata,
4861 BSS_CHANGED_BSSID | BSS_CHANGED_BASIC_RATES |
4862 BSS_CHANGED_BEACON_INT);
4865 sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH);
4867 err = sta_info_insert(new_sta);
4871 "failed to insert STA entry for the AP (error %d)\n",
4876 WARN_ON_ONCE(!ether_addr_equal(ifmgd->bssid, cbss->bssid));
4878 /* Cancel scan to ensure that nothing interferes with connection */
4879 if (local->scanning)
4880 ieee80211_scan_cancel(local);
4886 int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata,
4887 struct cfg80211_auth_request *req)
4889 struct ieee80211_local *local = sdata->local;
4890 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
4891 struct ieee80211_mgd_auth_data *auth_data;
4896 /* prepare auth data structure */
4898 switch (req->auth_type) {
4899 case NL80211_AUTHTYPE_OPEN_SYSTEM:
4900 auth_alg = WLAN_AUTH_OPEN;
4902 case NL80211_AUTHTYPE_SHARED_KEY:
4903 if (IS_ERR(local->wep_tx_tfm))
4905 auth_alg = WLAN_AUTH_SHARED_KEY;
4907 case NL80211_AUTHTYPE_FT:
4908 auth_alg = WLAN_AUTH_FT;
4910 case NL80211_AUTHTYPE_NETWORK_EAP:
4911 auth_alg = WLAN_AUTH_LEAP;
4913 case NL80211_AUTHTYPE_SAE:
4914 auth_alg = WLAN_AUTH_SAE;
4916 case NL80211_AUTHTYPE_FILS_SK:
4917 auth_alg = WLAN_AUTH_FILS_SK;
4919 case NL80211_AUTHTYPE_FILS_SK_PFS:
4920 auth_alg = WLAN_AUTH_FILS_SK_PFS;
4922 case NL80211_AUTHTYPE_FILS_PK:
4923 auth_alg = WLAN_AUTH_FILS_PK;
4929 if (ifmgd->assoc_data)
4932 auth_data = kzalloc(sizeof(*auth_data) + req->auth_data_len +
4933 req->ie_len, GFP_KERNEL);
4937 auth_data->bss = req->bss;
4939 if (req->auth_data_len >= 4) {
4940 if (req->auth_type == NL80211_AUTHTYPE_SAE) {
4941 __le16 *pos = (__le16 *) req->auth_data;
4943 auth_data->sae_trans = le16_to_cpu(pos[0]);
4944 auth_data->sae_status = le16_to_cpu(pos[1]);
4946 memcpy(auth_data->data, req->auth_data + 4,
4947 req->auth_data_len - 4);
4948 auth_data->data_len += req->auth_data_len - 4;
4951 /* Check if continuing authentication or trying to authenticate with the
4952 * same BSS that we were in the process of authenticating with and avoid
4953 * removal and re-addition of the STA entry in
4954 * ieee80211_prep_connection().
4956 cont_auth = ifmgd->auth_data && req->bss == ifmgd->auth_data->bss;
4958 if (req->ie && req->ie_len) {
4959 memcpy(&auth_data->data[auth_data->data_len],
4960 req->ie, req->ie_len);
4961 auth_data->data_len += req->ie_len;
4964 if (req->key && req->key_len) {
4965 auth_data->key_len = req->key_len;
4966 auth_data->key_idx = req->key_idx;
4967 memcpy(auth_data->key, req->key, req->key_len);
4970 auth_data->algorithm = auth_alg;
4972 /* try to authenticate/probe */
4974 if (ifmgd->auth_data) {
4975 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE) {
4976 auth_data->peer_confirmed =
4977 ifmgd->auth_data->peer_confirmed;
4979 ieee80211_destroy_auth_data(sdata, cont_auth);
4982 /* prep auth_data so we don't go into idle on disassoc */
4983 ifmgd->auth_data = auth_data;
4985 /* If this is continuation of an ongoing SAE authentication exchange
4986 * (i.e., request to send SAE Confirm) and the peer has already
4987 * confirmed, mark authentication completed since we are about to send
4990 if (cont_auth && req->auth_type == NL80211_AUTHTYPE_SAE &&
4991 auth_data->peer_confirmed && auth_data->sae_trans == 2)
4992 ieee80211_mark_sta_auth(sdata, req->bss->bssid);
4994 if (ifmgd->associated) {
4995 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
4998 "disconnect from AP %pM for new auth to %pM\n",
4999 ifmgd->associated->bssid, req->bss->bssid);
5000 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
5001 WLAN_REASON_UNSPECIFIED,
5004 ieee80211_report_disconnect(sdata, frame_buf,
5005 sizeof(frame_buf), true,
5006 WLAN_REASON_UNSPECIFIED);
5009 sdata_info(sdata, "authenticate with %pM\n", req->bss->bssid);
5011 err = ieee80211_prep_connection(sdata, req->bss, cont_auth, false);
5015 err = ieee80211_auth(sdata);
5017 sta_info_destroy_addr(sdata, req->bss->bssid);
5021 /* hold our own reference */
5022 cfg80211_ref_bss(local->hw.wiphy, auth_data->bss);
5026 eth_zero_addr(ifmgd->bssid);
5027 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
5028 ifmgd->auth_data = NULL;
5029 mutex_lock(&sdata->local->mtx);
5030 ieee80211_vif_release_channel(sdata);
5031 mutex_unlock(&sdata->local->mtx);
5036 int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
5037 struct cfg80211_assoc_request *req)
5039 struct ieee80211_local *local = sdata->local;
5040 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5041 struct ieee80211_bss *bss = (void *)req->bss->priv;
5042 struct ieee80211_mgd_assoc_data *assoc_data;
5043 const struct cfg80211_bss_ies *beacon_ies;
5044 struct ieee80211_supported_band *sband;
5045 const u8 *ssidie, *ht_ie, *vht_ie;
5047 bool override = false;
5049 assoc_data = kzalloc(sizeof(*assoc_data) + req->ie_len, GFP_KERNEL);
5054 ssidie = ieee80211_bss_get_ie(req->bss, WLAN_EID_SSID);
5060 memcpy(assoc_data->ssid, ssidie + 2, ssidie[1]);
5061 assoc_data->ssid_len = ssidie[1];
5064 if (ifmgd->associated) {
5065 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5068 "disconnect from AP %pM for new assoc to %pM\n",
5069 ifmgd->associated->bssid, req->bss->bssid);
5070 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
5071 WLAN_REASON_UNSPECIFIED,
5074 ieee80211_report_disconnect(sdata, frame_buf,
5075 sizeof(frame_buf), true,
5076 WLAN_REASON_UNSPECIFIED);
5079 if (ifmgd->auth_data && !ifmgd->auth_data->done) {
5084 if (ifmgd->assoc_data) {
5089 if (ifmgd->auth_data) {
5092 /* keep sta info, bssid if matching */
5093 match = ether_addr_equal(ifmgd->bssid, req->bss->bssid);
5094 ieee80211_destroy_auth_data(sdata, match);
5097 /* prepare assoc data */
5099 ifmgd->beacon_crc_valid = false;
5101 assoc_data->wmm = bss->wmm_used &&
5102 (local->hw.queues >= IEEE80211_NUM_ACS);
5105 * IEEE802.11n does not allow TKIP/WEP as pairwise ciphers in HT mode.
5106 * We still associate in non-HT mode (11a/b/g) if any one of these
5107 * ciphers is configured as pairwise.
5108 * We can set this to true for non-11n hardware, that'll be checked
5109 * separately along with the peer capabilities.
5111 for (i = 0; i < req->crypto.n_ciphers_pairwise; i++) {
5112 if (req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP40 ||
5113 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP ||
5114 req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) {
5115 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5116 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5117 ifmgd->flags |= IEEE80211_STA_DISABLE_HE;
5118 netdev_info(sdata->dev,
5119 "disabling HE/HT/VHT due to WEP/TKIP use\n");
5123 /* Also disable HT if we don't support it or the AP doesn't use WMM */
5124 sband = local->hw.wiphy->bands[req->bss->channel->band];
5125 if (!sband->ht_cap.ht_supported ||
5126 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
5127 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
5128 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5129 if (!bss->wmm_used &&
5130 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
5131 netdev_info(sdata->dev,
5132 "disabling HT as WMM/QoS is not supported by the AP\n");
5135 /* disable VHT if we don't support it or the AP doesn't use WMM */
5136 if (!sband->vht_cap.vht_supported ||
5137 local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used ||
5138 ifmgd->flags & IEEE80211_STA_DISABLE_WMM) {
5139 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5140 if (!bss->wmm_used &&
5141 !(ifmgd->flags & IEEE80211_STA_DISABLE_WMM))
5142 netdev_info(sdata->dev,
5143 "disabling VHT as WMM/QoS is not supported by the AP\n");
5146 memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa));
5147 memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask,
5148 sizeof(ifmgd->ht_capa_mask));
5150 memcpy(&ifmgd->vht_capa, &req->vht_capa, sizeof(ifmgd->vht_capa));
5151 memcpy(&ifmgd->vht_capa_mask, &req->vht_capa_mask,
5152 sizeof(ifmgd->vht_capa_mask));
5154 if (req->ie && req->ie_len) {
5155 memcpy(assoc_data->ie, req->ie, req->ie_len);
5156 assoc_data->ie_len = req->ie_len;
5159 if (req->fils_kek) {
5160 /* should already be checked in cfg80211 - so warn */
5161 if (WARN_ON(req->fils_kek_len > FILS_MAX_KEK_LEN)) {
5165 memcpy(assoc_data->fils_kek, req->fils_kek,
5167 assoc_data->fils_kek_len = req->fils_kek_len;
5170 if (req->fils_nonces)
5171 memcpy(assoc_data->fils_nonces, req->fils_nonces,
5172 2 * FILS_NONCE_LEN);
5174 assoc_data->bss = req->bss;
5176 if (ifmgd->req_smps == IEEE80211_SMPS_AUTOMATIC) {
5177 if (ifmgd->powersave)
5178 sdata->smps_mode = IEEE80211_SMPS_DYNAMIC;
5180 sdata->smps_mode = IEEE80211_SMPS_OFF;
5182 sdata->smps_mode = ifmgd->req_smps;
5184 assoc_data->capability = req->bss->capability;
5185 assoc_data->supp_rates = bss->supp_rates;
5186 assoc_data->supp_rates_len = bss->supp_rates_len;
5189 ht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_HT_OPERATION);
5190 if (ht_ie && ht_ie[1] >= sizeof(struct ieee80211_ht_operation))
5191 assoc_data->ap_ht_param =
5192 ((struct ieee80211_ht_operation *)(ht_ie + 2))->ht_param;
5194 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5195 vht_ie = ieee80211_bss_get_ie(req->bss, WLAN_EID_VHT_CAPABILITY);
5196 if (vht_ie && vht_ie[1] >= sizeof(struct ieee80211_vht_cap))
5197 memcpy(&assoc_data->ap_vht_cap, vht_ie + 2,
5198 sizeof(struct ieee80211_vht_cap));
5200 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5203 if (WARN((sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD) &&
5204 ieee80211_hw_check(&local->hw, PS_NULLFUNC_STACK),
5205 "U-APSD not supported with HW_PS_NULLFUNC_STACK\n"))
5206 sdata->vif.driver_flags &= ~IEEE80211_VIF_SUPPORTS_UAPSD;
5208 if (bss->wmm_used && bss->uapsd_supported &&
5209 (sdata->vif.driver_flags & IEEE80211_VIF_SUPPORTS_UAPSD)) {
5210 assoc_data->uapsd = true;
5211 ifmgd->flags |= IEEE80211_STA_UAPSD_ENABLED;
5213 assoc_data->uapsd = false;
5214 ifmgd->flags &= ~IEEE80211_STA_UAPSD_ENABLED;
5217 if (req->prev_bssid)
5218 memcpy(assoc_data->prev_bssid, req->prev_bssid, ETH_ALEN);
5221 ifmgd->mfp = IEEE80211_MFP_REQUIRED;
5222 ifmgd->flags |= IEEE80211_STA_MFP_ENABLED;
5224 ifmgd->mfp = IEEE80211_MFP_DISABLED;
5225 ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
5228 if (req->flags & ASSOC_REQ_USE_RRM)
5229 ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
5231 ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
5233 if (req->crypto.control_port)
5234 ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
5236 ifmgd->flags &= ~IEEE80211_STA_CONTROL_PORT;
5238 sdata->control_port_protocol = req->crypto.control_port_ethertype;
5239 sdata->control_port_no_encrypt = req->crypto.control_port_no_encrypt;
5240 sdata->control_port_over_nl80211 =
5241 req->crypto.control_port_over_nl80211;
5242 sdata->encrypt_headroom = ieee80211_cs_headroom(local, &req->crypto,
5245 /* kick off associate process */
5247 ifmgd->assoc_data = assoc_data;
5248 ifmgd->dtim_period = 0;
5249 ifmgd->have_beacon = false;
5251 /* override HT/VHT configuration only if the AP and we support it */
5252 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) {
5253 struct ieee80211_sta_ht_cap sta_ht_cap;
5255 if (req->flags & ASSOC_REQ_DISABLE_HT)
5258 memcpy(&sta_ht_cap, &sband->ht_cap, sizeof(sta_ht_cap));
5259 ieee80211_apply_htcap_overrides(sdata, &sta_ht_cap);
5261 /* check for 40 MHz disable override */
5262 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ) &&
5263 sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 &&
5264 !(sta_ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40))
5267 if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) &&
5268 req->flags & ASSOC_REQ_DISABLE_VHT)
5272 if (req->flags & ASSOC_REQ_DISABLE_HT) {
5273 ifmgd->flags |= IEEE80211_STA_DISABLE_HT;
5274 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5277 if (req->flags & ASSOC_REQ_DISABLE_VHT)
5278 ifmgd->flags |= IEEE80211_STA_DISABLE_VHT;
5280 err = ieee80211_prep_connection(sdata, req->bss, true, override);
5285 beacon_ies = rcu_dereference(req->bss->beacon_ies);
5287 if (ieee80211_hw_check(&sdata->local->hw, NEED_DTIM_BEFORE_ASSOC) &&
5290 * Wait up to one beacon interval ...
5291 * should this be more if we miss one?
5293 sdata_info(sdata, "waiting for beacon from %pM\n",
5295 assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval);
5296 assoc_data->timeout_started = true;
5297 assoc_data->need_beacon = true;
5298 } else if (beacon_ies) {
5299 const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM,
5304 if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) {
5305 const struct ieee80211_tim_ie *tim;
5306 tim = (void *)(tim_ie + 2);
5307 ifmgd->dtim_period = tim->dtim_period;
5308 dtim_count = tim->dtim_count;
5310 ifmgd->have_beacon = true;
5311 assoc_data->timeout = jiffies;
5312 assoc_data->timeout_started = true;
5314 if (ieee80211_hw_check(&local->hw, TIMING_BEACON_ONLY)) {
5315 sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf;
5316 sdata->vif.bss_conf.sync_device_ts =
5317 bss->device_ts_beacon;
5318 sdata->vif.bss_conf.sync_dtim_count = dtim_count;
5321 assoc_data->timeout = jiffies;
5322 assoc_data->timeout_started = true;
5326 run_again(sdata, assoc_data->timeout);
5328 if (bss->corrupt_data) {
5329 char *corrupt_type = "data";
5330 if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_BEACON) {
5331 if (bss->corrupt_data &
5332 IEEE80211_BSS_CORRUPT_PROBE_RESP)
5333 corrupt_type = "beacon and probe response";
5335 corrupt_type = "beacon";
5336 } else if (bss->corrupt_data & IEEE80211_BSS_CORRUPT_PROBE_RESP)
5337 corrupt_type = "probe response";
5338 sdata_info(sdata, "associating with AP with corrupt %s\n",
5344 eth_zero_addr(ifmgd->bssid);
5345 ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID);
5346 ifmgd->assoc_data = NULL;
5352 int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata,
5353 struct cfg80211_deauth_request *req)
5355 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5356 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5357 bool tx = !req->local_state_change;
5359 if (ifmgd->auth_data &&
5360 ether_addr_equal(ifmgd->auth_data->bss->bssid, req->bssid)) {
5362 "aborting authentication with %pM by local choice (Reason: %u=%s)\n",
5363 req->bssid, req->reason_code,
5364 ieee80211_get_reason_code_string(req->reason_code));
5366 drv_mgd_prepare_tx(sdata->local, sdata, 0);
5367 ieee80211_send_deauth_disassoc(sdata, req->bssid,
5368 IEEE80211_STYPE_DEAUTH,
5369 req->reason_code, tx,
5371 ieee80211_destroy_auth_data(sdata, false);
5372 ieee80211_report_disconnect(sdata, frame_buf,
5373 sizeof(frame_buf), true,
5379 if (ifmgd->assoc_data &&
5380 ether_addr_equal(ifmgd->assoc_data->bss->bssid, req->bssid)) {
5382 "aborting association with %pM by local choice (Reason: %u=%s)\n",
5383 req->bssid, req->reason_code,
5384 ieee80211_get_reason_code_string(req->reason_code));
5386 drv_mgd_prepare_tx(sdata->local, sdata, 0);
5387 ieee80211_send_deauth_disassoc(sdata, req->bssid,
5388 IEEE80211_STYPE_DEAUTH,
5389 req->reason_code, tx,
5391 ieee80211_destroy_assoc_data(sdata, false, true);
5392 ieee80211_report_disconnect(sdata, frame_buf,
5393 sizeof(frame_buf), true,
5398 if (ifmgd->associated &&
5399 ether_addr_equal(ifmgd->associated->bssid, req->bssid)) {
5401 "deauthenticating from %pM by local choice (Reason: %u=%s)\n",
5402 req->bssid, req->reason_code,
5403 ieee80211_get_reason_code_string(req->reason_code));
5405 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH,
5406 req->reason_code, tx, frame_buf);
5407 ieee80211_report_disconnect(sdata, frame_buf,
5408 sizeof(frame_buf), true,
5416 int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata,
5417 struct cfg80211_disassoc_request *req)
5419 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5421 u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN];
5424 * cfg80211 should catch this ... but it's racy since
5425 * we can receive a disassoc frame, process it, hand it
5426 * to cfg80211 while that's in a locked section already
5427 * trying to tell us that the user wants to disconnect.
5429 if (ifmgd->associated != req->bss)
5433 "disassociating from %pM by local choice (Reason: %u=%s)\n",
5434 req->bss->bssid, req->reason_code, ieee80211_get_reason_code_string(req->reason_code));
5436 memcpy(bssid, req->bss->bssid, ETH_ALEN);
5437 ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DISASSOC,
5438 req->reason_code, !req->local_state_change,
5441 ieee80211_report_disconnect(sdata, frame_buf, sizeof(frame_buf), true,
5447 void ieee80211_mgd_stop(struct ieee80211_sub_if_data *sdata)
5449 struct ieee80211_if_managed *ifmgd = &sdata->u.mgd;
5452 * Make sure some work items will not run after this,
5453 * they will not do anything but might not have been
5454 * cancelled when disconnecting.
5456 cancel_work_sync(&ifmgd->monitor_work);
5457 cancel_work_sync(&ifmgd->beacon_connection_loss_work);
5458 cancel_work_sync(&ifmgd->request_smps_work);
5459 cancel_work_sync(&ifmgd->csa_connection_drop_work);
5460 cancel_work_sync(&ifmgd->chswitch_work);
5461 cancel_delayed_work_sync(&ifmgd->tdls_peer_del_work);
5464 if (ifmgd->assoc_data) {
5465 struct cfg80211_bss *bss = ifmgd->assoc_data->bss;
5466 ieee80211_destroy_assoc_data(sdata, false, false);
5467 cfg80211_assoc_timeout(sdata->dev, bss);
5469 if (ifmgd->auth_data)
5470 ieee80211_destroy_auth_data(sdata, false);
5471 spin_lock_bh(&ifmgd->teardown_lock);
5472 if (ifmgd->teardown_skb) {
5473 kfree_skb(ifmgd->teardown_skb);
5474 ifmgd->teardown_skb = NULL;
5475 ifmgd->orig_teardown_skb = NULL;
5477 spin_unlock_bh(&ifmgd->teardown_lock);
5478 del_timer_sync(&ifmgd->timer);
5479 sdata_unlock(sdata);
5482 void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif,
5483 enum nl80211_cqm_rssi_threshold_event rssi_event,
5487 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5489 trace_api_cqm_rssi_notify(sdata, rssi_event, rssi_level);
5491 cfg80211_cqm_rssi_notify(sdata->dev, rssi_event, rssi_level, gfp);
5493 EXPORT_SYMBOL(ieee80211_cqm_rssi_notify);
5495 void ieee80211_cqm_beacon_loss_notify(struct ieee80211_vif *vif, gfp_t gfp)
5497 struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif);
5499 trace_api_cqm_beacon_loss_notify(sdata->local, sdata);
5501 cfg80211_cqm_beacon_loss_notify(sdata->dev, gfp);
5503 EXPORT_SYMBOL(ieee80211_cqm_beacon_loss_notify);