2 * settings.c: read and write saved sessions. (platform-independent)
11 /* The cipher order given here is the default order. */
12 static const struct keyvalwhere ciphernames[] = {
13 { "aes", CIPHER_AES, -1, -1 },
14 { "chacha20", CIPHER_CHACHA20, CIPHER_AES, +1 },
15 { "blowfish", CIPHER_BLOWFISH, -1, -1 },
16 { "3des", CIPHER_3DES, -1, -1 },
17 { "WARN", CIPHER_WARN, -1, -1 },
18 { "arcfour", CIPHER_ARCFOUR, -1, -1 },
19 { "des", CIPHER_DES, -1, -1 }
22 /* The default order here is sometimes overridden by the backward-
23 * compatibility warts in load_open_settings(), and should be kept
24 * in sync with those. */
25 static const struct keyvalwhere kexnames[] = {
26 { "ecdh", KEX_ECDH, -1, +1 },
27 /* This name is misleading: it covers both SHA-256 and SHA-1 variants */
28 { "dh-gex-sha1", KEX_DHGEX, -1, -1 },
29 { "dh-group14-sha1", KEX_DHGROUP14, -1, -1 },
30 { "dh-group1-sha1", KEX_DHGROUP1, KEX_WARN, +1 },
31 { "rsa", KEX_RSA, KEX_WARN, -1 },
32 { "WARN", KEX_WARN, -1, -1 }
35 static const struct keyvalwhere hknames[] = {
36 { "ed25519", HK_ED25519, -1, +1 },
37 { "ecdsa", HK_ECDSA, -1, -1 },
38 { "dsa", HK_DSA, -1, -1 },
39 { "rsa", HK_RSA, -1, -1 },
40 { "WARN", HK_WARN, -1, -1 },
44 * All the terminal modes that we know about for the "TerminalModes"
45 * setting. (Also used by config.c for the drop-down list.)
46 * This is currently precisely the same as the set in ssh.c, but could
47 * in principle differ if other backends started to support tty modes
48 * (e.g., the pty backend).
50 const char *const ttymodes[] = {
51 "INTR", "QUIT", "ERASE", "KILL", "EOF",
52 "EOL", "EOL2", "START", "STOP", "SUSP",
53 "DSUSP", "REPRINT", "WERASE", "LNEXT", "FLUSH",
54 "SWTCH", "STATUS", "DISCARD", "IGNPAR", "PARMRK",
55 "INPCK", "ISTRIP", "INLCR", "IGNCR", "ICRNL",
56 "IUCLC", "IXON", "IXANY", "IXOFF", "IMAXBEL",
57 "IUTF8", "ISIG", "ICANON", "XCASE", "ECHO",
58 "ECHOE", "ECHOK", "ECHONL", "NOFLSH", "TOSTOP",
59 "IEXTEN", "ECHOCTL", "ECHOKE", "PENDIN", "OPOST",
60 "OLCUC", "ONLCR", "OCRNL", "ONOCR", "ONLRET",
61 "CS7", "CS8", "PARENB", "PARODD", NULL
65 * Convenience functions to access the backends[] array
66 * (which is only present in tools that manage settings).
69 Backend *backend_from_name(const char *name)
72 for (p = backends; *p != NULL; p++)
73 if (!strcmp((*p)->name, name))
78 Backend *backend_from_proto(int proto)
81 for (p = backends; *p != NULL; p++)
82 if ((*p)->protocol == proto)
87 char *get_remote_username(Conf *conf)
89 char *username = conf_get_str(conf, CONF_username);
91 return dupstr(username);
92 } else if (conf_get_int(conf, CONF_username_from_env)) {
93 /* Use local username. */
94 return get_username(); /* might still be NULL */
100 static char *gpps_raw(void *handle, const char *name, const char *def)
102 char *ret = read_setting_s(handle, name);
104 ret = platform_default_s(name);
106 ret = def ? dupstr(def) : NULL; /* permit NULL as final fallback */
110 static void gpps(void *handle, const char *name, const char *def,
111 Conf *conf, int primary)
113 char *val = gpps_raw(handle, name, def);
114 conf_set_str(conf, primary, val);
119 * gppfont and gppfile cannot have local defaults, since the very
120 * format of a Filename or FontSpec is platform-dependent. So the
121 * platform-dependent functions MUST return some sort of value.
123 static void gppfont(void *handle, const char *name, Conf *conf, int primary)
125 FontSpec *result = read_setting_fontspec(handle, name);
127 result = platform_default_fontspec(name);
128 conf_set_fontspec(conf, primary, result);
129 fontspec_free(result);
131 static void gppfile(void *handle, const char *name, Conf *conf, int primary)
133 Filename *result = read_setting_filename(handle, name);
135 result = platform_default_filename(name);
136 conf_set_filename(conf, primary, result);
137 filename_free(result);
140 static int gppi_raw(void *handle, const char *name, int def)
142 def = platform_default_i(name, def);
143 return read_setting_i(handle, name, def);
146 static void gppi(void *handle, const char *name, int def,
147 Conf *conf, int primary)
149 conf_set_int(conf, primary, gppi_raw(handle, name, def));
153 * Read a set of name-value pairs in the format we occasionally use:
154 * NAME\tVALUE\0NAME\tVALUE\0\0 in memory
155 * NAME=VALUE,NAME=VALUE, in storage
156 * If there's no "=VALUE" (e.g. just NAME,NAME,NAME) then those keys
157 * are mapped to the empty string.
159 static int gppmap(void *handle, const char *name, Conf *conf, int primary)
161 char *buf, *p, *q, *key, *val;
164 * Start by clearing any existing subkeys of this key from conf.
166 while ((key = conf_get_str_nthstrkey(conf, primary, 0)) != NULL)
167 conf_del_str_str(conf, primary, key);
170 * Now read a serialised list from the settings and unmarshal it
171 * into its components.
173 buf = gpps_raw(handle, name, NULL);
181 while (*p && *p != ',') {
197 if (primary == CONF_portfwd && strchr(buf, 'D') != NULL) {
199 * Backwards-compatibility hack: dynamic forwardings are
200 * indexed in the data store as a third type letter in the
201 * key, 'D' alongside 'L' and 'R' - but really, they
202 * should be filed under 'L' with a special _value_,
203 * because local and dynamic forwardings both involve
204 * _listening_ on a local port, and are hence mutually
205 * exclusive on the same port number. So here we translate
206 * the legacy storage format into the sensible internal
207 * form, by finding the D and turning it into a L.
209 char *newkey = dupstr(buf);
210 *strchr(newkey, 'D') = 'L';
211 conf_set_str_str(conf, primary, newkey, "D");
214 conf_set_str_str(conf, primary, buf, val);
223 * Write a set of name/value pairs in the above format, or just the
224 * names if include_values is FALSE.
226 static void wmap(void *handle, char const *outkey, Conf *conf, int primary,
229 char *buf, *p, *key, *realkey;
233 len = 1; /* allow for NUL */
235 for (val = conf_get_str_strs(conf, primary, NULL, &key);
237 val = conf_get_str_strs(conf, primary, key, &key))
238 len += 2 + 2 * (strlen(key) + strlen(val)); /* allow for escaping */
240 buf = snewn(len, char);
243 for (val = conf_get_str_strs(conf, primary, NULL, &key);
245 val = conf_get_str_strs(conf, primary, key, &key)) {
247 if (primary == CONF_portfwd && !strcmp(val, "D")) {
249 * Backwards-compatibility hack, as above: translate from
250 * the sensible internal representation of dynamic
251 * forwardings (key "L<port>", value "D") to the
252 * conceptually incoherent legacy storage format (key
253 * "D<port>", value empty).
257 realkey = key; /* restore it at end of loop */
260 L = strchr(key, 'L');
268 for (q = key; *q; q++) {
269 if (*q == '=' || *q == ',' || *q == '\\')
273 if (include_values) {
275 for (q = val; *q; q++) {
276 if (*q == '=' || *q == ',' || *q == '\\')
288 write_setting_s(handle, outkey, buf);
292 static int key2val(const struct keyvalwhere *mapping,
293 int nmaps, char *key)
296 for (i = 0; i < nmaps; i++)
297 if (!strcmp(mapping[i].s, key)) return mapping[i].v;
301 static const char *val2key(const struct keyvalwhere *mapping,
305 for (i = 0; i < nmaps; i++)
306 if (mapping[i].v == val) return mapping[i].s;
311 * Helper function to parse a comma-separated list of strings into
312 * a preference list array of values. Any missing values are added
313 * to the end and duplicates are weeded.
314 * XXX: assumes vals in 'mapping' are small +ve integers
316 static void gprefs_from_str(const char *str,
317 const struct keyvalwhere *mapping, int nvals,
318 Conf *conf, int primary)
320 char *commalist = dupstr(str);
323 unsigned long seen = 0; /* bitmap for weeding dups etc */
326 * Go through that list and convert it into values.
331 while (*p && *p == ',') p++;
333 break; /* no more words */
336 while (*p && *p != ',') p++;
339 v = key2val(mapping, nvals, q);
340 if (v != -1 && !(seen & (1 << v))) {
342 conf_set_int_int(conf, primary, n, v);
350 * Now go through 'mapping' and add values that weren't mentioned
351 * in the list we fetched. We may have to loop over it multiple
352 * times so that we add values before other values whose default
353 * positions depend on them.
356 for (i = 0; i < nvals; i++) {
357 assert(mapping[i].v < 32);
359 if (!(seen & (1 << mapping[i].v))) {
361 * This element needs adding. But can we add it yet?
363 if (mapping[i].vrel != -1 && !(seen & (1 << mapping[i].vrel)))
367 * OK, we can work out where to add this element, so
370 if (mapping[i].vrel == -1) {
371 pos = (mapping[i].where < 0 ? n : 0);
373 for (j = 0; j < n; j++)
374 if (conf_get_int_int(conf, primary, j) ==
377 assert(j < n); /* implied by (seen & (1<<vrel)) */
378 pos = (mapping[i].where < 0 ? j : j+1);
384 for (j = n-1; j >= pos; j--)
385 conf_set_int_int(conf, primary, j+1,
386 conf_get_int_int(conf, primary, j));
387 conf_set_int_int(conf, primary, pos, mapping[i].v);
388 seen |= (1 << mapping[i].v);
396 * Read a preference list.
398 static void gprefs(void *sesskey, const char *name, const char *def,
399 const struct keyvalwhere *mapping, int nvals,
400 Conf *conf, int primary)
403 * Fetch the string which we'll parse as a comma-separated list.
405 char *value = gpps_raw(sesskey, name, def);
406 gprefs_from_str(value, mapping, nvals, conf, primary);
411 * Write out a preference list.
413 static void wprefs(void *sesskey, const char *name,
414 const struct keyvalwhere *mapping, int nvals,
415 Conf *conf, int primary)
420 for (maxlen = i = 0; i < nvals; i++) {
421 const char *s = val2key(mapping, nvals,
422 conf_get_int_int(conf, primary, i));
424 maxlen += (maxlen > 0 ? 1 : 0) + strlen(s);
428 buf = snewn(maxlen + 1, char);
431 for (i = 0; i < nvals; i++) {
432 const char *s = val2key(mapping, nvals,
433 conf_get_int_int(conf, primary, i));
435 p += sprintf(p, "%s%s", (p > buf ? "," : ""), s);
439 assert(p - buf == maxlen);
442 write_setting_s(sesskey, name, buf);
447 char *save_settings(const char *section, Conf *conf)
452 sesskey = open_settings_w(section, &errmsg);
455 save_open_settings(sesskey, conf);
456 close_settings_w(sesskey);
460 void save_open_settings(void *sesskey, Conf *conf)
465 write_setting_i(sesskey, "Present", 1);
466 write_setting_s(sesskey, "HostName", conf_get_str(conf, CONF_host));
467 write_setting_filename(sesskey, "LogFileName", conf_get_filename(conf, CONF_logfilename));
468 write_setting_i(sesskey, "LogType", conf_get_int(conf, CONF_logtype));
469 write_setting_i(sesskey, "LogFileClash", conf_get_int(conf, CONF_logxfovr));
470 write_setting_i(sesskey, "LogFlush", conf_get_int(conf, CONF_logflush));
471 write_setting_i(sesskey, "SSHLogOmitPasswords", conf_get_int(conf, CONF_logomitpass));
472 write_setting_i(sesskey, "SSHLogOmitData", conf_get_int(conf, CONF_logomitdata));
475 const Backend *b = backend_from_proto(conf_get_int(conf, CONF_protocol));
479 write_setting_s(sesskey, "Protocol", p);
480 write_setting_i(sesskey, "PortNumber", conf_get_int(conf, CONF_port));
481 /* The CloseOnExit numbers are arranged in a different order from
482 * the standard FORCE_ON / FORCE_OFF / AUTO. */
483 write_setting_i(sesskey, "CloseOnExit", (conf_get_int(conf, CONF_close_on_exit)+2)%3);
484 write_setting_i(sesskey, "WarnOnClose", !!conf_get_int(conf, CONF_warn_on_close));
485 write_setting_i(sesskey, "PingInterval", conf_get_int(conf, CONF_ping_interval) / 60); /* minutes */
486 write_setting_i(sesskey, "PingIntervalSecs", conf_get_int(conf, CONF_ping_interval) % 60); /* seconds */
487 write_setting_i(sesskey, "TCPNoDelay", conf_get_int(conf, CONF_tcp_nodelay));
488 write_setting_i(sesskey, "TCPKeepalives", conf_get_int(conf, CONF_tcp_keepalives));
489 write_setting_s(sesskey, "TerminalType", conf_get_str(conf, CONF_termtype));
490 write_setting_s(sesskey, "TerminalSpeed", conf_get_str(conf, CONF_termspeed));
491 wmap(sesskey, "TerminalModes", conf, CONF_ttymodes, TRUE);
493 /* Address family selection */
494 write_setting_i(sesskey, "AddressFamily", conf_get_int(conf, CONF_addressfamily));
497 write_setting_s(sesskey, "ProxyExcludeList", conf_get_str(conf, CONF_proxy_exclude_list));
498 write_setting_i(sesskey, "ProxyDNS", (conf_get_int(conf, CONF_proxy_dns)+2)%3);
499 write_setting_i(sesskey, "ProxyLocalhost", conf_get_int(conf, CONF_even_proxy_localhost));
500 write_setting_i(sesskey, "ProxyMethod", conf_get_int(conf, CONF_proxy_type));
501 write_setting_s(sesskey, "ProxyHost", conf_get_str(conf, CONF_proxy_host));
502 write_setting_i(sesskey, "ProxyPort", conf_get_int(conf, CONF_proxy_port));
503 write_setting_s(sesskey, "ProxyUsername", conf_get_str(conf, CONF_proxy_username));
504 write_setting_s(sesskey, "ProxyPassword", conf_get_str(conf, CONF_proxy_password));
505 write_setting_s(sesskey, "ProxyTelnetCommand", conf_get_str(conf, CONF_proxy_telnet_command));
506 write_setting_i(sesskey, "ProxyLogToTerm", conf_get_int(conf, CONF_proxy_log_to_term));
507 wmap(sesskey, "Environment", conf, CONF_environmt, TRUE);
508 write_setting_s(sesskey, "UserName", conf_get_str(conf, CONF_username));
509 write_setting_i(sesskey, "UserNameFromEnvironment", conf_get_int(conf, CONF_username_from_env));
510 write_setting_s(sesskey, "LocalUserName", conf_get_str(conf, CONF_localusername));
511 write_setting_i(sesskey, "NoPTY", conf_get_int(conf, CONF_nopty));
512 write_setting_i(sesskey, "Compression", conf_get_int(conf, CONF_compression));
513 write_setting_i(sesskey, "TryAgent", conf_get_int(conf, CONF_tryagent));
514 write_setting_i(sesskey, "AgentFwd", conf_get_int(conf, CONF_agentfwd));
515 write_setting_i(sesskey, "GssapiFwd", conf_get_int(conf, CONF_gssapifwd));
516 write_setting_i(sesskey, "ChangeUsername", conf_get_int(conf, CONF_change_username));
517 wprefs(sesskey, "Cipher", ciphernames, CIPHER_MAX, conf, CONF_ssh_cipherlist);
518 wprefs(sesskey, "KEX", kexnames, KEX_MAX, conf, CONF_ssh_kexlist);
519 wprefs(sesskey, "HostKey", hknames, HK_MAX, conf, CONF_ssh_hklist);
520 write_setting_i(sesskey, "RekeyTime", conf_get_int(conf, CONF_ssh_rekey_time));
521 write_setting_s(sesskey, "RekeyBytes", conf_get_str(conf, CONF_ssh_rekey_data));
522 write_setting_i(sesskey, "SshNoAuth", conf_get_int(conf, CONF_ssh_no_userauth));
523 write_setting_i(sesskey, "SshBanner", conf_get_int(conf, CONF_ssh_show_banner));
524 write_setting_i(sesskey, "AuthTIS", conf_get_int(conf, CONF_try_tis_auth));
525 write_setting_i(sesskey, "AuthKI", conf_get_int(conf, CONF_try_ki_auth));
526 write_setting_i(sesskey, "AuthGSSAPI", conf_get_int(conf, CONF_try_gssapi_auth));
528 wprefs(sesskey, "GSSLibs", gsslibkeywords, ngsslibs, conf, CONF_ssh_gsslist);
529 write_setting_filename(sesskey, "GSSCustom", conf_get_filename(conf, CONF_ssh_gss_custom));
531 write_setting_i(sesskey, "SshNoShell", conf_get_int(conf, CONF_ssh_no_shell));
532 write_setting_i(sesskey, "SshProt", conf_get_int(conf, CONF_sshprot));
533 write_setting_s(sesskey, "LogHost", conf_get_str(conf, CONF_loghost));
534 write_setting_i(sesskey, "SSH2DES", conf_get_int(conf, CONF_ssh2_des_cbc));
535 write_setting_filename(sesskey, "PublicKeyFile", conf_get_filename(conf, CONF_keyfile));
536 write_setting_s(sesskey, "RemoteCommand", conf_get_str(conf, CONF_remote_cmd));
537 write_setting_i(sesskey, "RFCEnviron", conf_get_int(conf, CONF_rfc_environ));
538 write_setting_i(sesskey, "PassiveTelnet", conf_get_int(conf, CONF_passive_telnet));
539 write_setting_i(sesskey, "BackspaceIsDelete", conf_get_int(conf, CONF_bksp_is_delete));
540 write_setting_i(sesskey, "RXVTHomeEnd", conf_get_int(conf, CONF_rxvt_homeend));
541 write_setting_i(sesskey, "LinuxFunctionKeys", conf_get_int(conf, CONF_funky_type));
542 write_setting_i(sesskey, "NoApplicationKeys", conf_get_int(conf, CONF_no_applic_k));
543 write_setting_i(sesskey, "NoApplicationCursors", conf_get_int(conf, CONF_no_applic_c));
544 write_setting_i(sesskey, "NoMouseReporting", conf_get_int(conf, CONF_no_mouse_rep));
545 write_setting_i(sesskey, "NoRemoteResize", conf_get_int(conf, CONF_no_remote_resize));
546 write_setting_i(sesskey, "NoAltScreen", conf_get_int(conf, CONF_no_alt_screen));
547 write_setting_i(sesskey, "NoRemoteWinTitle", conf_get_int(conf, CONF_no_remote_wintitle));
548 write_setting_i(sesskey, "NoRemoteClearScroll", conf_get_int(conf, CONF_no_remote_clearscroll));
549 write_setting_i(sesskey, "RemoteQTitleAction", conf_get_int(conf, CONF_remote_qtitle_action));
550 write_setting_i(sesskey, "NoDBackspace", conf_get_int(conf, CONF_no_dbackspace));
551 write_setting_i(sesskey, "NoRemoteCharset", conf_get_int(conf, CONF_no_remote_charset));
552 write_setting_i(sesskey, "ApplicationCursorKeys", conf_get_int(conf, CONF_app_cursor));
553 write_setting_i(sesskey, "ApplicationKeypad", conf_get_int(conf, CONF_app_keypad));
554 write_setting_i(sesskey, "NetHackKeypad", conf_get_int(conf, CONF_nethack_keypad));
555 write_setting_i(sesskey, "AltF4", conf_get_int(conf, CONF_alt_f4));
556 write_setting_i(sesskey, "AltSpace", conf_get_int(conf, CONF_alt_space));
557 write_setting_i(sesskey, "AltOnly", conf_get_int(conf, CONF_alt_only));
558 write_setting_i(sesskey, "ComposeKey", conf_get_int(conf, CONF_compose_key));
559 write_setting_i(sesskey, "CtrlAltKeys", conf_get_int(conf, CONF_ctrlaltkeys));
560 #ifdef OSX_META_KEY_CONFIG
561 write_setting_i(sesskey, "OSXOptionMeta", conf_get_int(conf, CONF_osx_option_meta));
562 write_setting_i(sesskey, "OSXCommandMeta", conf_get_int(conf, CONF_osx_command_meta));
564 write_setting_i(sesskey, "TelnetKey", conf_get_int(conf, CONF_telnet_keyboard));
565 write_setting_i(sesskey, "TelnetRet", conf_get_int(conf, CONF_telnet_newline));
566 write_setting_i(sesskey, "LocalEcho", conf_get_int(conf, CONF_localecho));
567 write_setting_i(sesskey, "LocalEdit", conf_get_int(conf, CONF_localedit));
568 write_setting_s(sesskey, "Answerback", conf_get_str(conf, CONF_answerback));
569 write_setting_i(sesskey, "AlwaysOnTop", conf_get_int(conf, CONF_alwaysontop));
570 write_setting_i(sesskey, "FullScreenOnAltEnter", conf_get_int(conf, CONF_fullscreenonaltenter));
571 write_setting_i(sesskey, "HideMousePtr", conf_get_int(conf, CONF_hide_mouseptr));
572 write_setting_i(sesskey, "SunkenEdge", conf_get_int(conf, CONF_sunken_edge));
573 write_setting_i(sesskey, "WindowBorder", conf_get_int(conf, CONF_window_border));
574 write_setting_i(sesskey, "CurType", conf_get_int(conf, CONF_cursor_type));
575 write_setting_i(sesskey, "BlinkCur", conf_get_int(conf, CONF_blink_cur));
576 write_setting_i(sesskey, "Beep", conf_get_int(conf, CONF_beep));
577 write_setting_i(sesskey, "BeepInd", conf_get_int(conf, CONF_beep_ind));
578 write_setting_filename(sesskey, "BellWaveFile", conf_get_filename(conf, CONF_bell_wavefile));
579 write_setting_i(sesskey, "BellOverload", conf_get_int(conf, CONF_bellovl));
580 write_setting_i(sesskey, "BellOverloadN", conf_get_int(conf, CONF_bellovl_n));
581 write_setting_i(sesskey, "BellOverloadT", conf_get_int(conf, CONF_bellovl_t)
586 write_setting_i(sesskey, "BellOverloadS", conf_get_int(conf, CONF_bellovl_s)
591 write_setting_i(sesskey, "ScrollbackLines", conf_get_int(conf, CONF_savelines));
592 write_setting_i(sesskey, "DECOriginMode", conf_get_int(conf, CONF_dec_om));
593 write_setting_i(sesskey, "AutoWrapMode", conf_get_int(conf, CONF_wrap_mode));
594 write_setting_i(sesskey, "LFImpliesCR", conf_get_int(conf, CONF_lfhascr));
595 write_setting_i(sesskey, "CRImpliesLF", conf_get_int(conf, CONF_crhaslf));
596 write_setting_i(sesskey, "DisableArabicShaping", conf_get_int(conf, CONF_arabicshaping));
597 write_setting_i(sesskey, "DisableBidi", conf_get_int(conf, CONF_bidi));
598 write_setting_i(sesskey, "WinNameAlways", conf_get_int(conf, CONF_win_name_always));
599 write_setting_s(sesskey, "WinTitle", conf_get_str(conf, CONF_wintitle));
600 write_setting_i(sesskey, "TermWidth", conf_get_int(conf, CONF_width));
601 write_setting_i(sesskey, "TermHeight", conf_get_int(conf, CONF_height));
602 write_setting_fontspec(sesskey, "Font", conf_get_fontspec(conf, CONF_font));
603 write_setting_i(sesskey, "FontQuality", conf_get_int(conf, CONF_font_quality));
604 write_setting_i(sesskey, "FontVTMode", conf_get_int(conf, CONF_vtmode));
605 write_setting_i(sesskey, "UseSystemColours", conf_get_int(conf, CONF_system_colour));
606 write_setting_i(sesskey, "TryPalette", conf_get_int(conf, CONF_try_palette));
607 write_setting_i(sesskey, "ANSIColour", conf_get_int(conf, CONF_ansi_colour));
608 write_setting_i(sesskey, "Xterm256Colour", conf_get_int(conf, CONF_xterm_256_colour));
609 write_setting_i(sesskey, "BoldAsColour", conf_get_int(conf, CONF_bold_style)-1);
611 for (i = 0; i < 22; i++) {
612 char buf[20], buf2[30];
613 sprintf(buf, "Colour%d", i);
614 sprintf(buf2, "%d,%d,%d",
615 conf_get_int_int(conf, CONF_colours, i*3+0),
616 conf_get_int_int(conf, CONF_colours, i*3+1),
617 conf_get_int_int(conf, CONF_colours, i*3+2));
618 write_setting_s(sesskey, buf, buf2);
620 write_setting_i(sesskey, "RawCNP", conf_get_int(conf, CONF_rawcnp));
621 write_setting_i(sesskey, "PasteRTF", conf_get_int(conf, CONF_rtf_paste));
622 write_setting_i(sesskey, "MouseIsXterm", conf_get_int(conf, CONF_mouse_is_xterm));
623 write_setting_i(sesskey, "RectSelect", conf_get_int(conf, CONF_rect_select));
624 write_setting_i(sesskey, "MouseOverride", conf_get_int(conf, CONF_mouse_override));
625 for (i = 0; i < 256; i += 32) {
626 char buf[20], buf2[256];
628 sprintf(buf, "Wordness%d", i);
630 for (j = i; j < i + 32; j++) {
631 sprintf(buf2 + strlen(buf2), "%s%d",
633 conf_get_int_int(conf, CONF_wordness, j));
635 write_setting_s(sesskey, buf, buf2);
637 write_setting_s(sesskey, "LineCodePage", conf_get_str(conf, CONF_line_codepage));
638 write_setting_i(sesskey, "CJKAmbigWide", conf_get_int(conf, CONF_cjk_ambig_wide));
639 write_setting_i(sesskey, "UTF8Override", conf_get_int(conf, CONF_utf8_override));
640 write_setting_s(sesskey, "Printer", conf_get_str(conf, CONF_printer));
641 write_setting_i(sesskey, "CapsLockCyr", conf_get_int(conf, CONF_xlat_capslockcyr));
642 write_setting_i(sesskey, "ScrollBar", conf_get_int(conf, CONF_scrollbar));
643 write_setting_i(sesskey, "ScrollBarFullScreen", conf_get_int(conf, CONF_scrollbar_in_fullscreen));
644 write_setting_i(sesskey, "ScrollOnKey", conf_get_int(conf, CONF_scroll_on_key));
645 write_setting_i(sesskey, "ScrollOnDisp", conf_get_int(conf, CONF_scroll_on_disp));
646 write_setting_i(sesskey, "EraseToScrollback", conf_get_int(conf, CONF_erase_to_scrollback));
647 write_setting_i(sesskey, "LockSize", conf_get_int(conf, CONF_resize_action));
648 write_setting_i(sesskey, "BCE", conf_get_int(conf, CONF_bce));
649 write_setting_i(sesskey, "BlinkText", conf_get_int(conf, CONF_blinktext));
650 write_setting_i(sesskey, "X11Forward", conf_get_int(conf, CONF_x11_forward));
651 write_setting_s(sesskey, "X11Display", conf_get_str(conf, CONF_x11_display));
652 write_setting_i(sesskey, "X11AuthType", conf_get_int(conf, CONF_x11_auth));
653 write_setting_filename(sesskey, "X11AuthFile", conf_get_filename(conf, CONF_xauthfile));
654 write_setting_i(sesskey, "LocalPortAcceptAll", conf_get_int(conf, CONF_lport_acceptall));
655 write_setting_i(sesskey, "RemotePortAcceptAll", conf_get_int(conf, CONF_rport_acceptall));
656 wmap(sesskey, "PortForwardings", conf, CONF_portfwd, TRUE);
657 write_setting_i(sesskey, "BugIgnore1", 2-conf_get_int(conf, CONF_sshbug_ignore1));
658 write_setting_i(sesskey, "BugPlainPW1", 2-conf_get_int(conf, CONF_sshbug_plainpw1));
659 write_setting_i(sesskey, "BugRSA1", 2-conf_get_int(conf, CONF_sshbug_rsa1));
660 write_setting_i(sesskey, "BugIgnore2", 2-conf_get_int(conf, CONF_sshbug_ignore2));
661 write_setting_i(sesskey, "BugHMAC2", 2-conf_get_int(conf, CONF_sshbug_hmac2));
662 write_setting_i(sesskey, "BugDeriveKey2", 2-conf_get_int(conf, CONF_sshbug_derivekey2));
663 write_setting_i(sesskey, "BugRSAPad2", 2-conf_get_int(conf, CONF_sshbug_rsapad2));
664 write_setting_i(sesskey, "BugPKSessID2", 2-conf_get_int(conf, CONF_sshbug_pksessid2));
665 write_setting_i(sesskey, "BugRekey2", 2-conf_get_int(conf, CONF_sshbug_rekey2));
666 write_setting_i(sesskey, "BugMaxPkt2", 2-conf_get_int(conf, CONF_sshbug_maxpkt2));
667 write_setting_i(sesskey, "BugOldGex2", 2-conf_get_int(conf, CONF_sshbug_oldgex2));
668 write_setting_i(sesskey, "BugWinadj", 2-conf_get_int(conf, CONF_sshbug_winadj));
669 write_setting_i(sesskey, "BugChanReq", 2-conf_get_int(conf, CONF_sshbug_chanreq));
670 write_setting_i(sesskey, "StampUtmp", conf_get_int(conf, CONF_stamp_utmp));
671 write_setting_i(sesskey, "LoginShell", conf_get_int(conf, CONF_login_shell));
672 write_setting_i(sesskey, "ScrollbarOnLeft", conf_get_int(conf, CONF_scrollbar_on_left));
673 write_setting_fontspec(sesskey, "BoldFont", conf_get_fontspec(conf, CONF_boldfont));
674 write_setting_fontspec(sesskey, "WideFont", conf_get_fontspec(conf, CONF_widefont));
675 write_setting_fontspec(sesskey, "WideBoldFont", conf_get_fontspec(conf, CONF_wideboldfont));
676 write_setting_i(sesskey, "ShadowBold", conf_get_int(conf, CONF_shadowbold));
677 write_setting_i(sesskey, "ShadowBoldOffset", conf_get_int(conf, CONF_shadowboldoffset));
678 write_setting_s(sesskey, "SerialLine", conf_get_str(conf, CONF_serline));
679 write_setting_i(sesskey, "SerialSpeed", conf_get_int(conf, CONF_serspeed));
680 write_setting_i(sesskey, "SerialDataBits", conf_get_int(conf, CONF_serdatabits));
681 write_setting_i(sesskey, "SerialStopHalfbits", conf_get_int(conf, CONF_serstopbits));
682 write_setting_i(sesskey, "SerialParity", conf_get_int(conf, CONF_serparity));
683 write_setting_i(sesskey, "SerialFlowControl", conf_get_int(conf, CONF_serflow));
684 write_setting_s(sesskey, "WindowClass", conf_get_str(conf, CONF_winclass));
685 write_setting_i(sesskey, "ConnectionSharing", conf_get_int(conf, CONF_ssh_connection_sharing));
686 write_setting_i(sesskey, "ConnectionSharingUpstream", conf_get_int(conf, CONF_ssh_connection_sharing_upstream));
687 write_setting_i(sesskey, "ConnectionSharingDownstream", conf_get_int(conf, CONF_ssh_connection_sharing_downstream));
688 wmap(sesskey, "SSHManualHostKeys", conf, CONF_ssh_manual_hostkeys, FALSE);
691 void load_settings(const char *section, Conf *conf)
695 sesskey = open_settings_r(section);
696 load_open_settings(sesskey, conf);
697 close_settings_r(sesskey);
699 if (conf_launchable(conf))
700 add_session_to_jumplist(section);
703 void load_open_settings(void *sesskey, Conf *conf)
708 conf_set_int(conf, CONF_ssh_subsys, 0); /* FIXME: load this properly */
709 conf_set_str(conf, CONF_remote_cmd, "");
710 conf_set_str(conf, CONF_remote_cmd2, "");
711 conf_set_str(conf, CONF_ssh_nc_host, "");
713 gpps(sesskey, "HostName", "", conf, CONF_host);
714 gppfile(sesskey, "LogFileName", conf, CONF_logfilename);
715 gppi(sesskey, "LogType", 0, conf, CONF_logtype);
716 gppi(sesskey, "LogFileClash", LGXF_ASK, conf, CONF_logxfovr);
717 gppi(sesskey, "LogFlush", 1, conf, CONF_logflush);
718 gppi(sesskey, "SSHLogOmitPasswords", 1, conf, CONF_logomitpass);
719 gppi(sesskey, "SSHLogOmitData", 0, conf, CONF_logomitdata);
721 prot = gpps_raw(sesskey, "Protocol", "default");
722 conf_set_int(conf, CONF_protocol, default_protocol);
723 conf_set_int(conf, CONF_port, default_port);
725 const Backend *b = backend_from_name(prot);
727 conf_set_int(conf, CONF_protocol, b->protocol);
728 gppi(sesskey, "PortNumber", default_port, conf, CONF_port);
733 /* Address family selection */
734 gppi(sesskey, "AddressFamily", ADDRTYPE_UNSPEC, conf, CONF_addressfamily);
736 /* The CloseOnExit numbers are arranged in a different order from
737 * the standard FORCE_ON / FORCE_OFF / AUTO. */
738 i = gppi_raw(sesskey, "CloseOnExit", 1); conf_set_int(conf, CONF_close_on_exit, (i+1)%3);
739 gppi(sesskey, "WarnOnClose", 1, conf, CONF_warn_on_close);
741 /* This is two values for backward compatibility with 0.50/0.51 */
742 int pingmin, pingsec;
743 pingmin = gppi_raw(sesskey, "PingInterval", 0);
744 pingsec = gppi_raw(sesskey, "PingIntervalSecs", 0);
745 conf_set_int(conf, CONF_ping_interval, pingmin * 60 + pingsec);
747 gppi(sesskey, "TCPNoDelay", 1, conf, CONF_tcp_nodelay);
748 gppi(sesskey, "TCPKeepalives", 0, conf, CONF_tcp_keepalives);
749 gpps(sesskey, "TerminalType", "xterm", conf, CONF_termtype);
750 gpps(sesskey, "TerminalSpeed", "38400,38400", conf, CONF_termspeed);
751 if (!gppmap(sesskey, "TerminalModes", conf, CONF_ttymodes)) {
752 /* This hardcodes a big set of defaults in any new saved
753 * sessions. Let's hope we don't change our mind. */
754 for (i = 0; ttymodes[i]; i++)
755 conf_set_str_str(conf, CONF_ttymodes, ttymodes[i], "A");
759 gpps(sesskey, "ProxyExcludeList", "", conf, CONF_proxy_exclude_list);
760 i = gppi_raw(sesskey, "ProxyDNS", 1); conf_set_int(conf, CONF_proxy_dns, (i+1)%3);
761 gppi(sesskey, "ProxyLocalhost", 0, conf, CONF_even_proxy_localhost);
762 gppi(sesskey, "ProxyMethod", -1, conf, CONF_proxy_type);
763 if (conf_get_int(conf, CONF_proxy_type) == -1) {
765 i = gppi_raw(sesskey, "ProxyType", 0);
767 conf_set_int(conf, CONF_proxy_type, PROXY_NONE);
769 conf_set_int(conf, CONF_proxy_type, PROXY_HTTP);
771 conf_set_int(conf, CONF_proxy_type, PROXY_TELNET);
773 conf_set_int(conf, CONF_proxy_type, PROXY_CMD);
775 i = gppi_raw(sesskey, "ProxySOCKSVersion", 5);
777 conf_set_int(conf, CONF_proxy_type, PROXY_SOCKS5);
779 conf_set_int(conf, CONF_proxy_type, PROXY_SOCKS4);
782 gpps(sesskey, "ProxyHost", "proxy", conf, CONF_proxy_host);
783 gppi(sesskey, "ProxyPort", 80, conf, CONF_proxy_port);
784 gpps(sesskey, "ProxyUsername", "", conf, CONF_proxy_username);
785 gpps(sesskey, "ProxyPassword", "", conf, CONF_proxy_password);
786 gpps(sesskey, "ProxyTelnetCommand", "connect %host %port\\n",
787 conf, CONF_proxy_telnet_command);
788 gppi(sesskey, "ProxyLogToTerm", FORCE_OFF, conf, CONF_proxy_log_to_term);
789 gppmap(sesskey, "Environment", conf, CONF_environmt);
790 gpps(sesskey, "UserName", "", conf, CONF_username);
791 gppi(sesskey, "UserNameFromEnvironment", 0, conf, CONF_username_from_env);
792 gpps(sesskey, "LocalUserName", "", conf, CONF_localusername);
793 gppi(sesskey, "NoPTY", 0, conf, CONF_nopty);
794 gppi(sesskey, "Compression", 0, conf, CONF_compression);
795 gppi(sesskey, "TryAgent", 1, conf, CONF_tryagent);
796 gppi(sesskey, "AgentFwd", 0, conf, CONF_agentfwd);
797 gppi(sesskey, "ChangeUsername", 0, conf, CONF_change_username);
798 gppi(sesskey, "GssapiFwd", 0, conf, CONF_gssapifwd);
799 gprefs(sesskey, "Cipher", "\0",
800 ciphernames, CIPHER_MAX, conf, CONF_ssh_cipherlist);
802 /* Backward-compatibility: before 0.58 (when the "KEX"
803 * preference was first added), we had an option to
804 * disable gex under the "bugs" panel after one report of
805 * a server which offered it then choked, but we never got
806 * a server version string or any other reports. */
807 const char *default_kexes,
808 *normal_default = "ecdh,dh-gex-sha1,dh-group14-sha1,rsa,"
809 "WARN,dh-group1-sha1",
810 *bugdhgex2_default = "ecdh,dh-group14-sha1,rsa,"
811 "WARN,dh-group1-sha1,dh-gex-sha1";
813 i = 2 - gppi_raw(sesskey, "BugDHGEx2", 0);
815 default_kexes = bugdhgex2_default;
817 default_kexes = normal_default;
818 /* Migration: after 0.67 we decided we didn't like
819 * dh-group1-sha1. If it looks like the user never changed
820 * the defaults, quietly upgrade their settings to demote it.
821 * (If they did, they're on their own.) */
822 raw = gpps_raw(sesskey, "KEX", default_kexes);
824 /* Lack of 'ecdh' tells us this was saved by 0.58-0.67
825 * inclusive. If it was saved by a later version, we need
826 * to leave it alone. */
827 if (strcmp(raw, "dh-group14-sha1,dh-group1-sha1,rsa,"
828 "WARN,dh-gex-sha1") == 0) {
829 /* Previously migrated from BugDHGEx2. */
831 raw = dupstr(bugdhgex2_default);
832 } else if (strcmp(raw, "dh-gex-sha1,dh-group14-sha1,"
833 "dh-group1-sha1,rsa,WARN") == 0) {
834 /* Untouched old default setting. */
836 raw = dupstr(normal_default);
838 gprefs_from_str(raw, kexnames, KEX_MAX, conf, CONF_ssh_kexlist);
841 gprefs(sesskey, "HostKey", "ed25519,ecdsa,rsa,dsa,WARN",
842 hknames, HK_MAX, conf, CONF_ssh_hklist);
843 gppi(sesskey, "RekeyTime", 60, conf, CONF_ssh_rekey_time);
844 gpps(sesskey, "RekeyBytes", "1G", conf, CONF_ssh_rekey_data);
846 /* SSH-2 only by default */
847 int sshprot = gppi_raw(sesskey, "SshProt", 3);
848 /* Old sessions may contain the values correponding to the fallbacks
849 * we used to allow; migrate them */
850 if (sshprot == 1) sshprot = 0; /* => "SSH-1 only" */
851 else if (sshprot == 2) sshprot = 3; /* => "SSH-2 only" */
852 conf_set_int(conf, CONF_sshprot, sshprot);
854 gpps(sesskey, "LogHost", "", conf, CONF_loghost);
855 gppi(sesskey, "SSH2DES", 0, conf, CONF_ssh2_des_cbc);
856 gppi(sesskey, "SshNoAuth", 0, conf, CONF_ssh_no_userauth);
857 gppi(sesskey, "SshBanner", 1, conf, CONF_ssh_show_banner);
858 gppi(sesskey, "AuthTIS", 0, conf, CONF_try_tis_auth);
859 gppi(sesskey, "AuthKI", 1, conf, CONF_try_ki_auth);
860 gppi(sesskey, "AuthGSSAPI", 1, conf, CONF_try_gssapi_auth);
862 gprefs(sesskey, "GSSLibs", "\0",
863 gsslibkeywords, ngsslibs, conf, CONF_ssh_gsslist);
864 gppfile(sesskey, "GSSCustom", conf, CONF_ssh_gss_custom);
866 gppi(sesskey, "SshNoShell", 0, conf, CONF_ssh_no_shell);
867 gppfile(sesskey, "PublicKeyFile", conf, CONF_keyfile);
868 gpps(sesskey, "RemoteCommand", "", conf, CONF_remote_cmd);
869 gppi(sesskey, "RFCEnviron", 0, conf, CONF_rfc_environ);
870 gppi(sesskey, "PassiveTelnet", 0, conf, CONF_passive_telnet);
871 gppi(sesskey, "BackspaceIsDelete", 1, conf, CONF_bksp_is_delete);
872 gppi(sesskey, "RXVTHomeEnd", 0, conf, CONF_rxvt_homeend);
873 gppi(sesskey, "LinuxFunctionKeys", 0, conf, CONF_funky_type);
874 gppi(sesskey, "NoApplicationKeys", 0, conf, CONF_no_applic_k);
875 gppi(sesskey, "NoApplicationCursors", 0, conf, CONF_no_applic_c);
876 gppi(sesskey, "NoMouseReporting", 0, conf, CONF_no_mouse_rep);
877 gppi(sesskey, "NoRemoteResize", 0, conf, CONF_no_remote_resize);
878 gppi(sesskey, "NoAltScreen", 0, conf, CONF_no_alt_screen);
879 gppi(sesskey, "NoRemoteWinTitle", 0, conf, CONF_no_remote_wintitle);
880 gppi(sesskey, "NoRemoteClearScroll", 0, conf, CONF_no_remote_clearscroll);
882 /* Backward compatibility */
883 int no_remote_qtitle = gppi_raw(sesskey, "NoRemoteQTitle", 1);
884 /* We deliberately interpret the old setting of "no response" as
885 * "empty string". This changes the behaviour, but hopefully for
886 * the better; the user can always recover the old behaviour. */
887 gppi(sesskey, "RemoteQTitleAction",
888 no_remote_qtitle ? TITLE_EMPTY : TITLE_REAL,
889 conf, CONF_remote_qtitle_action);
891 gppi(sesskey, "NoDBackspace", 0, conf, CONF_no_dbackspace);
892 gppi(sesskey, "NoRemoteCharset", 0, conf, CONF_no_remote_charset);
893 gppi(sesskey, "ApplicationCursorKeys", 0, conf, CONF_app_cursor);
894 gppi(sesskey, "ApplicationKeypad", 0, conf, CONF_app_keypad);
895 gppi(sesskey, "NetHackKeypad", 0, conf, CONF_nethack_keypad);
896 gppi(sesskey, "AltF4", 1, conf, CONF_alt_f4);
897 gppi(sesskey, "AltSpace", 0, conf, CONF_alt_space);
898 gppi(sesskey, "AltOnly", 0, conf, CONF_alt_only);
899 gppi(sesskey, "ComposeKey", 0, conf, CONF_compose_key);
900 gppi(sesskey, "CtrlAltKeys", 1, conf, CONF_ctrlaltkeys);
901 #ifdef OSX_META_KEY_CONFIG
902 gppi(sesskey, "OSXOptionMeta", 1, conf, CONF_osx_option_meta);
903 gppi(sesskey, "OSXCommandMeta", 0, conf, CONF_osx_command_meta);
905 gppi(sesskey, "TelnetKey", 0, conf, CONF_telnet_keyboard);
906 gppi(sesskey, "TelnetRet", 1, conf, CONF_telnet_newline);
907 gppi(sesskey, "LocalEcho", AUTO, conf, CONF_localecho);
908 gppi(sesskey, "LocalEdit", AUTO, conf, CONF_localedit);
909 gpps(sesskey, "Answerback", "PuTTY", conf, CONF_answerback);
910 gppi(sesskey, "AlwaysOnTop", 0, conf, CONF_alwaysontop);
911 gppi(sesskey, "FullScreenOnAltEnter", 0, conf, CONF_fullscreenonaltenter);
912 gppi(sesskey, "HideMousePtr", 0, conf, CONF_hide_mouseptr);
913 gppi(sesskey, "SunkenEdge", 0, conf, CONF_sunken_edge);
914 gppi(sesskey, "WindowBorder", 1, conf, CONF_window_border);
915 gppi(sesskey, "CurType", 0, conf, CONF_cursor_type);
916 gppi(sesskey, "BlinkCur", 0, conf, CONF_blink_cur);
917 /* pedantic compiler tells me I can't use conf, CONF_beep as an int * :-) */
918 gppi(sesskey, "Beep", 1, conf, CONF_beep);
919 gppi(sesskey, "BeepInd", 0, conf, CONF_beep_ind);
920 gppfile(sesskey, "BellWaveFile", conf, CONF_bell_wavefile);
921 gppi(sesskey, "BellOverload", 1, conf, CONF_bellovl);
922 gppi(sesskey, "BellOverloadN", 5, conf, CONF_bellovl_n);
923 i = gppi_raw(sesskey, "BellOverloadT", 2*TICKSPERSEC
928 conf_set_int(conf, CONF_bellovl_t, i
933 i = gppi_raw(sesskey, "BellOverloadS", 5*TICKSPERSEC
938 conf_set_int(conf, CONF_bellovl_s, i
943 gppi(sesskey, "ScrollbackLines", 2000, conf, CONF_savelines);
944 gppi(sesskey, "DECOriginMode", 0, conf, CONF_dec_om);
945 gppi(sesskey, "AutoWrapMode", 1, conf, CONF_wrap_mode);
946 gppi(sesskey, "LFImpliesCR", 0, conf, CONF_lfhascr);
947 gppi(sesskey, "CRImpliesLF", 0, conf, CONF_crhaslf);
948 gppi(sesskey, "DisableArabicShaping", 0, conf, CONF_arabicshaping);
949 gppi(sesskey, "DisableBidi", 0, conf, CONF_bidi);
950 gppi(sesskey, "WinNameAlways", 1, conf, CONF_win_name_always);
951 gpps(sesskey, "WinTitle", "", conf, CONF_wintitle);
952 gppi(sesskey, "TermWidth", 80, conf, CONF_width);
953 gppi(sesskey, "TermHeight", 24, conf, CONF_height);
954 gppfont(sesskey, "Font", conf, CONF_font);
955 gppi(sesskey, "FontQuality", FQ_DEFAULT, conf, CONF_font_quality);
956 gppi(sesskey, "FontVTMode", VT_UNICODE, conf, CONF_vtmode);
957 gppi(sesskey, "UseSystemColours", 0, conf, CONF_system_colour);
958 gppi(sesskey, "TryPalette", 0, conf, CONF_try_palette);
959 gppi(sesskey, "ANSIColour", 1, conf, CONF_ansi_colour);
960 gppi(sesskey, "Xterm256Colour", 1, conf, CONF_xterm_256_colour);
961 i = gppi_raw(sesskey, "BoldAsColour", 1); conf_set_int(conf, CONF_bold_style, i+1);
963 for (i = 0; i < 22; i++) {
964 static const char *const defaults[] = {
965 "187,187,187", "255,255,255", "0,0,0", "85,85,85", "0,0,0",
966 "0,255,0", "0,0,0", "85,85,85", "187,0,0", "255,85,85",
967 "0,187,0", "85,255,85", "187,187,0", "255,255,85", "0,0,187",
968 "85,85,255", "187,0,187", "255,85,255", "0,187,187",
969 "85,255,255", "187,187,187", "255,255,255"
973 sprintf(buf, "Colour%d", i);
974 buf2 = gpps_raw(sesskey, buf, defaults[i]);
975 if (sscanf(buf2, "%d,%d,%d", &c0, &c1, &c2) == 3) {
976 conf_set_int_int(conf, CONF_colours, i*3+0, c0);
977 conf_set_int_int(conf, CONF_colours, i*3+1, c1);
978 conf_set_int_int(conf, CONF_colours, i*3+2, c2);
982 gppi(sesskey, "RawCNP", 0, conf, CONF_rawcnp);
983 gppi(sesskey, "PasteRTF", 0, conf, CONF_rtf_paste);
984 gppi(sesskey, "MouseIsXterm", 0, conf, CONF_mouse_is_xterm);
985 gppi(sesskey, "RectSelect", 0, conf, CONF_rect_select);
986 gppi(sesskey, "MouseOverride", 1, conf, CONF_mouse_override);
987 for (i = 0; i < 256; i += 32) {
988 static const char *const defaults[] = {
989 "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0",
990 "0,1,2,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1",
991 "1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2",
992 "1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1",
993 "1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
994 "1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
995 "2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2",
996 "2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2"
998 char buf[20], *buf2, *p;
1000 sprintf(buf, "Wordness%d", i);
1001 buf2 = gpps_raw(sesskey, buf, defaults[i / 32]);
1003 for (j = i; j < i + 32; j++) {
1005 while (*p && *p != ',')
1009 conf_set_int_int(conf, CONF_wordness, j, atoi(q));
1014 * The empty default for LineCodePage will be converted later
1015 * into a plausible default for the locale.
1017 gpps(sesskey, "LineCodePage", "", conf, CONF_line_codepage);
1018 gppi(sesskey, "CJKAmbigWide", 0, conf, CONF_cjk_ambig_wide);
1019 gppi(sesskey, "UTF8Override", 1, conf, CONF_utf8_override);
1020 gpps(sesskey, "Printer", "", conf, CONF_printer);
1021 gppi(sesskey, "CapsLockCyr", 0, conf, CONF_xlat_capslockcyr);
1022 gppi(sesskey, "ScrollBar", 1, conf, CONF_scrollbar);
1023 gppi(sesskey, "ScrollBarFullScreen", 0, conf, CONF_scrollbar_in_fullscreen);
1024 gppi(sesskey, "ScrollOnKey", 0, conf, CONF_scroll_on_key);
1025 gppi(sesskey, "ScrollOnDisp", 1, conf, CONF_scroll_on_disp);
1026 gppi(sesskey, "EraseToScrollback", 1, conf, CONF_erase_to_scrollback);
1027 gppi(sesskey, "LockSize", 0, conf, CONF_resize_action);
1028 gppi(sesskey, "BCE", 1, conf, CONF_bce);
1029 gppi(sesskey, "BlinkText", 0, conf, CONF_blinktext);
1030 gppi(sesskey, "X11Forward", 0, conf, CONF_x11_forward);
1031 gpps(sesskey, "X11Display", "", conf, CONF_x11_display);
1032 gppi(sesskey, "X11AuthType", X11_MIT, conf, CONF_x11_auth);
1033 gppfile(sesskey, "X11AuthFile", conf, CONF_xauthfile);
1035 gppi(sesskey, "LocalPortAcceptAll", 0, conf, CONF_lport_acceptall);
1036 gppi(sesskey, "RemotePortAcceptAll", 0, conf, CONF_rport_acceptall);
1037 gppmap(sesskey, "PortForwardings", conf, CONF_portfwd);
1038 i = gppi_raw(sesskey, "BugIgnore1", 0); conf_set_int(conf, CONF_sshbug_ignore1, 2-i);
1039 i = gppi_raw(sesskey, "BugPlainPW1", 0); conf_set_int(conf, CONF_sshbug_plainpw1, 2-i);
1040 i = gppi_raw(sesskey, "BugRSA1", 0); conf_set_int(conf, CONF_sshbug_rsa1, 2-i);
1041 i = gppi_raw(sesskey, "BugIgnore2", 0); conf_set_int(conf, CONF_sshbug_ignore2, 2-i);
1044 i = gppi_raw(sesskey, "BugHMAC2", 0); conf_set_int(conf, CONF_sshbug_hmac2, 2-i);
1046 i = gppi_raw(sesskey, "BuggyMAC", 0);
1048 conf_set_int(conf, CONF_sshbug_hmac2, FORCE_ON);
1051 i = gppi_raw(sesskey, "BugDeriveKey2", 0); conf_set_int(conf, CONF_sshbug_derivekey2, 2-i);
1052 i = gppi_raw(sesskey, "BugRSAPad2", 0); conf_set_int(conf, CONF_sshbug_rsapad2, 2-i);
1053 i = gppi_raw(sesskey, "BugPKSessID2", 0); conf_set_int(conf, CONF_sshbug_pksessid2, 2-i);
1054 i = gppi_raw(sesskey, "BugRekey2", 0); conf_set_int(conf, CONF_sshbug_rekey2, 2-i);
1055 i = gppi_raw(sesskey, "BugMaxPkt2", 0); conf_set_int(conf, CONF_sshbug_maxpkt2, 2-i);
1056 i = gppi_raw(sesskey, "BugOldGex2", 0); conf_set_int(conf, CONF_sshbug_oldgex2, 2-i);
1057 i = gppi_raw(sesskey, "BugWinadj", 0); conf_set_int(conf, CONF_sshbug_winadj, 2-i);
1058 i = gppi_raw(sesskey, "BugChanReq", 0); conf_set_int(conf, CONF_sshbug_chanreq, 2-i);
1059 conf_set_int(conf, CONF_ssh_simple, FALSE);
1060 gppi(sesskey, "StampUtmp", 1, conf, CONF_stamp_utmp);
1061 gppi(sesskey, "LoginShell", 1, conf, CONF_login_shell);
1062 gppi(sesskey, "ScrollbarOnLeft", 0, conf, CONF_scrollbar_on_left);
1063 gppi(sesskey, "ShadowBold", 0, conf, CONF_shadowbold);
1064 gppfont(sesskey, "BoldFont", conf, CONF_boldfont);
1065 gppfont(sesskey, "WideFont", conf, CONF_widefont);
1066 gppfont(sesskey, "WideBoldFont", conf, CONF_wideboldfont);
1067 gppi(sesskey, "ShadowBoldOffset", 1, conf, CONF_shadowboldoffset);
1068 gpps(sesskey, "SerialLine", "", conf, CONF_serline);
1069 gppi(sesskey, "SerialSpeed", 9600, conf, CONF_serspeed);
1070 gppi(sesskey, "SerialDataBits", 8, conf, CONF_serdatabits);
1071 gppi(sesskey, "SerialStopHalfbits", 2, conf, CONF_serstopbits);
1072 gppi(sesskey, "SerialParity", SER_PAR_NONE, conf, CONF_serparity);
1073 gppi(sesskey, "SerialFlowControl", SER_FLOW_XONXOFF, conf, CONF_serflow);
1074 gpps(sesskey, "WindowClass", "", conf, CONF_winclass);
1075 gppi(sesskey, "ConnectionSharing", 0, conf, CONF_ssh_connection_sharing);
1076 gppi(sesskey, "ConnectionSharingUpstream", 1, conf, CONF_ssh_connection_sharing_upstream);
1077 gppi(sesskey, "ConnectionSharingDownstream", 1, conf, CONF_ssh_connection_sharing_downstream);
1078 gppmap(sesskey, "SSHManualHostKeys", conf, CONF_ssh_manual_hostkeys);
1081 void do_defaults(const char *session, Conf *conf)
1083 load_settings(session, conf);
1086 static int sessioncmp(const void *av, const void *bv)
1088 const char *a = *(const char *const *) av;
1089 const char *b = *(const char *const *) bv;
1092 * Alphabetical order, except that "Default Settings" is a
1093 * special case and comes first.
1095 if (!strcmp(a, "Default Settings"))
1096 return -1; /* a comes first */
1097 if (!strcmp(b, "Default Settings"))
1098 return +1; /* b comes first */
1100 * FIXME: perhaps we should ignore the first & in determining
1103 return strcmp(a, b); /* otherwise, compare normally */
1106 void get_sesslist(struct sesslist *list, int allocate)
1108 char otherbuf[2048];
1109 int buflen, bufsize, i;
1115 buflen = bufsize = 0;
1116 list->buffer = NULL;
1117 if ((handle = enum_settings_start()) != NULL) {
1119 ret = enum_settings_next(handle, otherbuf, sizeof(otherbuf));
1121 int len = strlen(otherbuf) + 1;
1122 if (bufsize < buflen + len) {
1123 bufsize = buflen + len + 2048;
1124 list->buffer = sresize(list->buffer, bufsize, char);
1126 strcpy(list->buffer + buflen, otherbuf);
1127 buflen += strlen(list->buffer + buflen) + 1;
1130 enum_settings_finish(handle);
1132 list->buffer = sresize(list->buffer, buflen + 1, char);
1133 list->buffer[buflen] = '\0';
1136 * Now set up the list of sessions. Note that "Default
1137 * Settings" must always be claimed to exist, even if it
1142 list->nsessions = 1; /* "Default Settings" counts as one */
1144 if (strcmp(p, "Default Settings"))
1151 list->sessions = snewn(list->nsessions + 1, const char *);
1152 list->sessions[0] = "Default Settings";
1156 if (strcmp(p, "Default Settings"))
1157 list->sessions[i++] = p;
1163 qsort(list->sessions, i, sizeof(const char *), sessioncmp);
1165 sfree(list->buffer);
1166 sfree(list->sessions);
1167 list->buffer = NULL;
1168 list->sessions = NULL;