2 * settings.c: read and write saved sessions. (platform-independent)
11 /* The cipher order given here is the default order. */
12 static const struct keyvalwhere ciphernames[] = {
13 { "chacha20", CIPHER_CHACHA20, -1, -1 },
14 { "aes", CIPHER_AES, -1, -1 },
15 { "blowfish", CIPHER_BLOWFISH, -1, -1 },
16 { "3des", CIPHER_3DES, -1, -1 },
17 { "WARN", CIPHER_WARN, -1, -1 },
18 { "arcfour", CIPHER_ARCFOUR, -1, -1 },
19 { "des", CIPHER_DES, -1, -1 }
22 static const struct keyvalwhere kexnames[] = {
23 { "ecdh", KEX_ECDH, -1, +1 },
24 { "dh-gex-sha1", KEX_DHGEX, -1, -1 },
25 { "dh-group14-sha1", KEX_DHGROUP14, -1, -1 },
26 { "dh-group1-sha1", KEX_DHGROUP1, -1, -1 },
27 { "rsa", KEX_RSA, KEX_WARN, -1 },
28 { "WARN", KEX_WARN, -1, -1 }
32 * All the terminal modes that we know about for the "TerminalModes"
33 * setting. (Also used by config.c for the drop-down list.)
34 * This is currently precisely the same as the set in ssh.c, but could
35 * in principle differ if other backends started to support tty modes
36 * (e.g., the pty backend).
38 const char *const ttymodes[] = {
39 "INTR", "QUIT", "ERASE", "KILL", "EOF",
40 "EOL", "EOL2", "START", "STOP", "SUSP",
41 "DSUSP", "REPRINT", "WERASE", "LNEXT", "FLUSH",
42 "SWTCH", "STATUS", "DISCARD", "IGNPAR", "PARMRK",
43 "INPCK", "ISTRIP", "INLCR", "IGNCR", "ICRNL",
44 "IUCLC", "IXON", "IXANY", "IXOFF", "IMAXBEL",
45 "ISIG", "ICANON", "XCASE", "ECHO", "ECHOE",
46 "ECHOK", "ECHONL", "NOFLSH", "TOSTOP", "IEXTEN",
47 "ECHOCTL", "ECHOKE", "PENDIN", "OPOST", "OLCUC",
48 "ONLCR", "OCRNL", "ONOCR", "ONLRET", "CS7",
49 "CS8", "PARENB", "PARODD", NULL
53 * Convenience functions to access the backends[] array
54 * (which is only present in tools that manage settings).
57 Backend *backend_from_name(const char *name)
60 for (p = backends; *p != NULL; p++)
61 if (!strcmp((*p)->name, name))
66 Backend *backend_from_proto(int proto)
69 for (p = backends; *p != NULL; p++)
70 if ((*p)->protocol == proto)
75 char *get_remote_username(Conf *conf)
77 char *username = conf_get_str(conf, CONF_username);
79 return dupstr(username);
80 } else if (conf_get_int(conf, CONF_username_from_env)) {
81 /* Use local username. */
82 return get_username(); /* might still be NULL */
88 static char *gpps_raw(void *handle, const char *name, const char *def)
90 char *ret = read_setting_s(handle, name);
92 ret = platform_default_s(name);
94 ret = def ? dupstr(def) : NULL; /* permit NULL as final fallback */
98 static void gpps(void *handle, const char *name, const char *def,
99 Conf *conf, int primary)
101 char *val = gpps_raw(handle, name, def);
102 conf_set_str(conf, primary, val);
107 * gppfont and gppfile cannot have local defaults, since the very
108 * format of a Filename or FontSpec is platform-dependent. So the
109 * platform-dependent functions MUST return some sort of value.
111 static void gppfont(void *handle, const char *name, Conf *conf, int primary)
113 FontSpec *result = read_setting_fontspec(handle, name);
115 result = platform_default_fontspec(name);
116 conf_set_fontspec(conf, primary, result);
117 fontspec_free(result);
119 static void gppfile(void *handle, const char *name, Conf *conf, int primary)
121 Filename *result = read_setting_filename(handle, name);
123 result = platform_default_filename(name);
124 conf_set_filename(conf, primary, result);
125 filename_free(result);
128 static int gppi_raw(void *handle, const char *name, int def)
130 def = platform_default_i(name, def);
131 return read_setting_i(handle, name, def);
134 static void gppi(void *handle, const char *name, int def,
135 Conf *conf, int primary)
137 conf_set_int(conf, primary, gppi_raw(handle, name, def));
141 * Read a set of name-value pairs in the format we occasionally use:
142 * NAME\tVALUE\0NAME\tVALUE\0\0 in memory
143 * NAME=VALUE,NAME=VALUE, in storage
144 * If there's no "=VALUE" (e.g. just NAME,NAME,NAME) then those keys
145 * are mapped to the empty string.
147 static int gppmap(void *handle, const char *name, Conf *conf, int primary)
149 char *buf, *p, *q, *key, *val;
152 * Start by clearing any existing subkeys of this key from conf.
154 while ((key = conf_get_str_nthstrkey(conf, primary, 0)) != NULL)
155 conf_del_str_str(conf, primary, key);
158 * Now read a serialised list from the settings and unmarshal it
159 * into its components.
161 buf = gpps_raw(handle, name, NULL);
169 while (*p && *p != ',') {
185 if (primary == CONF_portfwd && strchr(buf, 'D') != NULL) {
187 * Backwards-compatibility hack: dynamic forwardings are
188 * indexed in the data store as a third type letter in the
189 * key, 'D' alongside 'L' and 'R' - but really, they
190 * should be filed under 'L' with a special _value_,
191 * because local and dynamic forwardings both involve
192 * _listening_ on a local port, and are hence mutually
193 * exclusive on the same port number. So here we translate
194 * the legacy storage format into the sensible internal
195 * form, by finding the D and turning it into a L.
197 char *newkey = dupstr(buf);
198 *strchr(newkey, 'D') = 'L';
199 conf_set_str_str(conf, primary, newkey, "D");
202 conf_set_str_str(conf, primary, buf, val);
211 * Write a set of name/value pairs in the above format, or just the
212 * names if include_values is FALSE.
214 static void wmap(void *handle, char const *outkey, Conf *conf, int primary,
217 char *buf, *p, *key, *realkey;
221 len = 1; /* allow for NUL */
223 for (val = conf_get_str_strs(conf, primary, NULL, &key);
225 val = conf_get_str_strs(conf, primary, key, &key))
226 len += 2 + 2 * (strlen(key) + strlen(val)); /* allow for escaping */
228 buf = snewn(len, char);
231 for (val = conf_get_str_strs(conf, primary, NULL, &key);
233 val = conf_get_str_strs(conf, primary, key, &key)) {
235 if (primary == CONF_portfwd && !strcmp(val, "D")) {
237 * Backwards-compatibility hack, as above: translate from
238 * the sensible internal representation of dynamic
239 * forwardings (key "L<port>", value "D") to the
240 * conceptually incoherent legacy storage format (key
241 * "D<port>", value empty).
245 realkey = key; /* restore it at end of loop */
248 L = strchr(key, 'L');
256 for (q = key; *q; q++) {
257 if (*q == '=' || *q == ',' || *q == '\\')
261 if (include_values) {
263 for (q = val; *q; q++) {
264 if (*q == '=' || *q == ',' || *q == '\\')
276 write_setting_s(handle, outkey, buf);
280 static int key2val(const struct keyvalwhere *mapping,
281 int nmaps, char *key)
284 for (i = 0; i < nmaps; i++)
285 if (!strcmp(mapping[i].s, key)) return mapping[i].v;
289 static const char *val2key(const struct keyvalwhere *mapping,
293 for (i = 0; i < nmaps; i++)
294 if (mapping[i].v == val) return mapping[i].s;
299 * Helper function to parse a comma-separated list of strings into
300 * a preference list array of values. Any missing values are added
301 * to the end and duplicates are weeded.
302 * XXX: assumes vals in 'mapping' are small +ve integers
304 static void gprefs(void *sesskey, const char *name, const char *def,
305 const struct keyvalwhere *mapping, int nvals,
306 Conf *conf, int primary)
311 unsigned long seen = 0; /* bitmap for weeding dups etc */
314 * Fetch the string which we'll parse as a comma-separated list.
316 commalist = gpps_raw(sesskey, name, def);
319 * Go through that list and convert it into values.
324 while (*p && *p == ',') p++;
326 break; /* no more words */
329 while (*p && *p != ',') p++;
332 v = key2val(mapping, nvals, q);
333 if (v != -1 && !(seen & (1 << v))) {
335 conf_set_int_int(conf, primary, n, v);
343 * Now go through 'mapping' and add values that weren't mentioned
344 * in the list we fetched. We may have to loop over it multiple
345 * times so that we add values before other values whose default
346 * positions depend on them.
349 for (i = 0; i < nvals; i++) {
350 assert(mapping[i].v < 32);
352 if (!(seen & (1 << mapping[i].v))) {
354 * This element needs adding. But can we add it yet?
356 if (mapping[i].vrel != -1 && !(seen & (1 << mapping[i].vrel)))
360 * OK, we can work out where to add this element, so
363 if (mapping[i].vrel == -1) {
364 pos = (mapping[i].where < 0 ? n : 0);
366 for (j = 0; j < n; j++)
367 if (conf_get_int_int(conf, primary, j) ==
370 assert(j < n); /* implied by (seen & (1<<vrel)) */
371 pos = (mapping[i].where < 0 ? j : j+1);
377 for (j = n-1; j >= pos; j--)
378 conf_set_int_int(conf, primary, j+1,
379 conf_get_int_int(conf, primary, j));
380 conf_set_int_int(conf, primary, pos, mapping[i].v);
388 * Write out a preference list.
390 static void wprefs(void *sesskey, const char *name,
391 const struct keyvalwhere *mapping, int nvals,
392 Conf *conf, int primary)
397 for (maxlen = i = 0; i < nvals; i++) {
398 const char *s = val2key(mapping, nvals,
399 conf_get_int_int(conf, primary, i));
401 maxlen += (maxlen > 0 ? 1 : 0) + strlen(s);
405 buf = snewn(maxlen + 1, char);
408 for (i = 0; i < nvals; i++) {
409 const char *s = val2key(mapping, nvals,
410 conf_get_int_int(conf, primary, i));
412 p += sprintf(p, "%s%s", (p > buf ? "," : ""), s);
416 assert(p - buf == maxlen);
419 write_setting_s(sesskey, name, buf);
424 char *save_settings(const char *section, Conf *conf)
429 sesskey = open_settings_w(section, &errmsg);
432 save_open_settings(sesskey, conf);
433 close_settings_w(sesskey);
437 void save_open_settings(void *sesskey, Conf *conf)
442 write_setting_i(sesskey, "Present", 1);
443 write_setting_s(sesskey, "HostName", conf_get_str(conf, CONF_host));
444 write_setting_filename(sesskey, "LogFileName", conf_get_filename(conf, CONF_logfilename));
445 write_setting_i(sesskey, "LogType", conf_get_int(conf, CONF_logtype));
446 write_setting_i(sesskey, "LogFileClash", conf_get_int(conf, CONF_logxfovr));
447 write_setting_i(sesskey, "LogFlush", conf_get_int(conf, CONF_logflush));
448 write_setting_i(sesskey, "SSHLogOmitPasswords", conf_get_int(conf, CONF_logomitpass));
449 write_setting_i(sesskey, "SSHLogOmitData", conf_get_int(conf, CONF_logomitdata));
452 const Backend *b = backend_from_proto(conf_get_int(conf, CONF_protocol));
456 write_setting_s(sesskey, "Protocol", p);
457 write_setting_i(sesskey, "PortNumber", conf_get_int(conf, CONF_port));
458 /* The CloseOnExit numbers are arranged in a different order from
459 * the standard FORCE_ON / FORCE_OFF / AUTO. */
460 write_setting_i(sesskey, "CloseOnExit", (conf_get_int(conf, CONF_close_on_exit)+2)%3);
461 write_setting_i(sesskey, "WarnOnClose", !!conf_get_int(conf, CONF_warn_on_close));
462 write_setting_i(sesskey, "PingInterval", conf_get_int(conf, CONF_ping_interval) / 60); /* minutes */
463 write_setting_i(sesskey, "PingIntervalSecs", conf_get_int(conf, CONF_ping_interval) % 60); /* seconds */
464 write_setting_i(sesskey, "TCPNoDelay", conf_get_int(conf, CONF_tcp_nodelay));
465 write_setting_i(sesskey, "TCPKeepalives", conf_get_int(conf, CONF_tcp_keepalives));
466 write_setting_s(sesskey, "TerminalType", conf_get_str(conf, CONF_termtype));
467 write_setting_s(sesskey, "TerminalSpeed", conf_get_str(conf, CONF_termspeed));
468 wmap(sesskey, "TerminalModes", conf, CONF_ttymodes, TRUE);
470 /* Address family selection */
471 write_setting_i(sesskey, "AddressFamily", conf_get_int(conf, CONF_addressfamily));
474 write_setting_s(sesskey, "ProxyExcludeList", conf_get_str(conf, CONF_proxy_exclude_list));
475 write_setting_i(sesskey, "ProxyDNS", (conf_get_int(conf, CONF_proxy_dns)+2)%3);
476 write_setting_i(sesskey, "ProxyLocalhost", conf_get_int(conf, CONF_even_proxy_localhost));
477 write_setting_i(sesskey, "ProxyMethod", conf_get_int(conf, CONF_proxy_type));
478 write_setting_s(sesskey, "ProxyHost", conf_get_str(conf, CONF_proxy_host));
479 write_setting_i(sesskey, "ProxyPort", conf_get_int(conf, CONF_proxy_port));
480 write_setting_s(sesskey, "ProxyUsername", conf_get_str(conf, CONF_proxy_username));
481 write_setting_s(sesskey, "ProxyPassword", conf_get_str(conf, CONF_proxy_password));
482 write_setting_s(sesskey, "ProxyTelnetCommand", conf_get_str(conf, CONF_proxy_telnet_command));
483 wmap(sesskey, "Environment", conf, CONF_environmt, TRUE);
484 write_setting_s(sesskey, "UserName", conf_get_str(conf, CONF_username));
485 write_setting_i(sesskey, "UserNameFromEnvironment", conf_get_int(conf, CONF_username_from_env));
486 write_setting_s(sesskey, "LocalUserName", conf_get_str(conf, CONF_localusername));
487 write_setting_i(sesskey, "NoPTY", conf_get_int(conf, CONF_nopty));
488 write_setting_i(sesskey, "Compression", conf_get_int(conf, CONF_compression));
489 write_setting_i(sesskey, "TryAgent", conf_get_int(conf, CONF_tryagent));
490 write_setting_i(sesskey, "AgentFwd", conf_get_int(conf, CONF_agentfwd));
491 write_setting_i(sesskey, "GssapiFwd", conf_get_int(conf, CONF_gssapifwd));
492 write_setting_i(sesskey, "ChangeUsername", conf_get_int(conf, CONF_change_username));
493 wprefs(sesskey, "Cipher", ciphernames, CIPHER_MAX, conf, CONF_ssh_cipherlist);
494 wprefs(sesskey, "KEX", kexnames, KEX_MAX, conf, CONF_ssh_kexlist);
495 write_setting_i(sesskey, "RekeyTime", conf_get_int(conf, CONF_ssh_rekey_time));
496 write_setting_s(sesskey, "RekeyBytes", conf_get_str(conf, CONF_ssh_rekey_data));
497 write_setting_i(sesskey, "SshNoAuth", conf_get_int(conf, CONF_ssh_no_userauth));
498 write_setting_i(sesskey, "SshBanner", conf_get_int(conf, CONF_ssh_show_banner));
499 write_setting_i(sesskey, "AuthTIS", conf_get_int(conf, CONF_try_tis_auth));
500 write_setting_i(sesskey, "AuthKI", conf_get_int(conf, CONF_try_ki_auth));
501 write_setting_i(sesskey, "AuthGSSAPI", conf_get_int(conf, CONF_try_gssapi_auth));
503 wprefs(sesskey, "GSSLibs", gsslibkeywords, ngsslibs, conf, CONF_ssh_gsslist);
504 write_setting_filename(sesskey, "GSSCustom", conf_get_filename(conf, CONF_ssh_gss_custom));
506 write_setting_i(sesskey, "SshNoShell", conf_get_int(conf, CONF_ssh_no_shell));
507 write_setting_i(sesskey, "SshProt", conf_get_int(conf, CONF_sshprot));
508 write_setting_s(sesskey, "LogHost", conf_get_str(conf, CONF_loghost));
509 write_setting_i(sesskey, "SSH2DES", conf_get_int(conf, CONF_ssh2_des_cbc));
510 write_setting_filename(sesskey, "PublicKeyFile", conf_get_filename(conf, CONF_keyfile));
511 write_setting_s(sesskey, "RemoteCommand", conf_get_str(conf, CONF_remote_cmd));
512 write_setting_i(sesskey, "RFCEnviron", conf_get_int(conf, CONF_rfc_environ));
513 write_setting_i(sesskey, "PassiveTelnet", conf_get_int(conf, CONF_passive_telnet));
514 write_setting_i(sesskey, "BackspaceIsDelete", conf_get_int(conf, CONF_bksp_is_delete));
515 write_setting_i(sesskey, "RXVTHomeEnd", conf_get_int(conf, CONF_rxvt_homeend));
516 write_setting_i(sesskey, "LinuxFunctionKeys", conf_get_int(conf, CONF_funky_type));
517 write_setting_i(sesskey, "NoApplicationKeys", conf_get_int(conf, CONF_no_applic_k));
518 write_setting_i(sesskey, "NoApplicationCursors", conf_get_int(conf, CONF_no_applic_c));
519 write_setting_i(sesskey, "NoMouseReporting", conf_get_int(conf, CONF_no_mouse_rep));
520 write_setting_i(sesskey, "NoRemoteResize", conf_get_int(conf, CONF_no_remote_resize));
521 write_setting_i(sesskey, "NoAltScreen", conf_get_int(conf, CONF_no_alt_screen));
522 write_setting_i(sesskey, "NoRemoteWinTitle", conf_get_int(conf, CONF_no_remote_wintitle));
523 write_setting_i(sesskey, "RemoteQTitleAction", conf_get_int(conf, CONF_remote_qtitle_action));
524 write_setting_i(sesskey, "NoDBackspace", conf_get_int(conf, CONF_no_dbackspace));
525 write_setting_i(sesskey, "NoRemoteCharset", conf_get_int(conf, CONF_no_remote_charset));
526 write_setting_i(sesskey, "ApplicationCursorKeys", conf_get_int(conf, CONF_app_cursor));
527 write_setting_i(sesskey, "ApplicationKeypad", conf_get_int(conf, CONF_app_keypad));
528 write_setting_i(sesskey, "NetHackKeypad", conf_get_int(conf, CONF_nethack_keypad));
529 write_setting_i(sesskey, "AltF4", conf_get_int(conf, CONF_alt_f4));
530 write_setting_i(sesskey, "AltSpace", conf_get_int(conf, CONF_alt_space));
531 write_setting_i(sesskey, "AltOnly", conf_get_int(conf, CONF_alt_only));
532 write_setting_i(sesskey, "ComposeKey", conf_get_int(conf, CONF_compose_key));
533 write_setting_i(sesskey, "CtrlAltKeys", conf_get_int(conf, CONF_ctrlaltkeys));
534 write_setting_i(sesskey, "TelnetKey", conf_get_int(conf, CONF_telnet_keyboard));
535 write_setting_i(sesskey, "TelnetRet", conf_get_int(conf, CONF_telnet_newline));
536 write_setting_i(sesskey, "LocalEcho", conf_get_int(conf, CONF_localecho));
537 write_setting_i(sesskey, "LocalEdit", conf_get_int(conf, CONF_localedit));
538 write_setting_s(sesskey, "Answerback", conf_get_str(conf, CONF_answerback));
539 write_setting_i(sesskey, "AlwaysOnTop", conf_get_int(conf, CONF_alwaysontop));
540 write_setting_i(sesskey, "FullScreenOnAltEnter", conf_get_int(conf, CONF_fullscreenonaltenter));
541 write_setting_i(sesskey, "HideMousePtr", conf_get_int(conf, CONF_hide_mouseptr));
542 write_setting_i(sesskey, "SunkenEdge", conf_get_int(conf, CONF_sunken_edge));
543 write_setting_i(sesskey, "WindowBorder", conf_get_int(conf, CONF_window_border));
544 write_setting_i(sesskey, "CurType", conf_get_int(conf, CONF_cursor_type));
545 write_setting_i(sesskey, "BlinkCur", conf_get_int(conf, CONF_blink_cur));
546 write_setting_i(sesskey, "Beep", conf_get_int(conf, CONF_beep));
547 write_setting_i(sesskey, "BeepInd", conf_get_int(conf, CONF_beep_ind));
548 write_setting_filename(sesskey, "BellWaveFile", conf_get_filename(conf, CONF_bell_wavefile));
549 write_setting_i(sesskey, "BellOverload", conf_get_int(conf, CONF_bellovl));
550 write_setting_i(sesskey, "BellOverloadN", conf_get_int(conf, CONF_bellovl_n));
551 write_setting_i(sesskey, "BellOverloadT", conf_get_int(conf, CONF_bellovl_t)
556 write_setting_i(sesskey, "BellOverloadS", conf_get_int(conf, CONF_bellovl_s)
561 write_setting_i(sesskey, "ScrollbackLines", conf_get_int(conf, CONF_savelines));
562 write_setting_i(sesskey, "DECOriginMode", conf_get_int(conf, CONF_dec_om));
563 write_setting_i(sesskey, "AutoWrapMode", conf_get_int(conf, CONF_wrap_mode));
564 write_setting_i(sesskey, "LFImpliesCR", conf_get_int(conf, CONF_lfhascr));
565 write_setting_i(sesskey, "CRImpliesLF", conf_get_int(conf, CONF_crhaslf));
566 write_setting_i(sesskey, "DisableArabicShaping", conf_get_int(conf, CONF_arabicshaping));
567 write_setting_i(sesskey, "DisableBidi", conf_get_int(conf, CONF_bidi));
568 write_setting_i(sesskey, "WinNameAlways", conf_get_int(conf, CONF_win_name_always));
569 write_setting_s(sesskey, "WinTitle", conf_get_str(conf, CONF_wintitle));
570 write_setting_i(sesskey, "TermWidth", conf_get_int(conf, CONF_width));
571 write_setting_i(sesskey, "TermHeight", conf_get_int(conf, CONF_height));
572 write_setting_fontspec(sesskey, "Font", conf_get_fontspec(conf, CONF_font));
573 write_setting_i(sesskey, "FontQuality", conf_get_int(conf, CONF_font_quality));
574 write_setting_i(sesskey, "FontVTMode", conf_get_int(conf, CONF_vtmode));
575 write_setting_i(sesskey, "UseSystemColours", conf_get_int(conf, CONF_system_colour));
576 write_setting_i(sesskey, "TryPalette", conf_get_int(conf, CONF_try_palette));
577 write_setting_i(sesskey, "ANSIColour", conf_get_int(conf, CONF_ansi_colour));
578 write_setting_i(sesskey, "Xterm256Colour", conf_get_int(conf, CONF_xterm_256_colour));
579 write_setting_i(sesskey, "BoldAsColour", conf_get_int(conf, CONF_bold_style)-1);
581 for (i = 0; i < 22; i++) {
582 char buf[20], buf2[30];
583 sprintf(buf, "Colour%d", i);
584 sprintf(buf2, "%d,%d,%d",
585 conf_get_int_int(conf, CONF_colours, i*3+0),
586 conf_get_int_int(conf, CONF_colours, i*3+1),
587 conf_get_int_int(conf, CONF_colours, i*3+2));
588 write_setting_s(sesskey, buf, buf2);
590 write_setting_i(sesskey, "RawCNP", conf_get_int(conf, CONF_rawcnp));
591 write_setting_i(sesskey, "PasteRTF", conf_get_int(conf, CONF_rtf_paste));
592 write_setting_i(sesskey, "MouseIsXterm", conf_get_int(conf, CONF_mouse_is_xterm));
593 write_setting_i(sesskey, "RectSelect", conf_get_int(conf, CONF_rect_select));
594 write_setting_i(sesskey, "MouseOverride", conf_get_int(conf, CONF_mouse_override));
595 for (i = 0; i < 256; i += 32) {
596 char buf[20], buf2[256];
598 sprintf(buf, "Wordness%d", i);
600 for (j = i; j < i + 32; j++) {
601 sprintf(buf2 + strlen(buf2), "%s%d",
603 conf_get_int_int(conf, CONF_wordness, j));
605 write_setting_s(sesskey, buf, buf2);
607 write_setting_s(sesskey, "LineCodePage", conf_get_str(conf, CONF_line_codepage));
608 write_setting_i(sesskey, "CJKAmbigWide", conf_get_int(conf, CONF_cjk_ambig_wide));
609 write_setting_i(sesskey, "UTF8Override", conf_get_int(conf, CONF_utf8_override));
610 write_setting_s(sesskey, "Printer", conf_get_str(conf, CONF_printer));
611 write_setting_i(sesskey, "CapsLockCyr", conf_get_int(conf, CONF_xlat_capslockcyr));
612 write_setting_i(sesskey, "ScrollBar", conf_get_int(conf, CONF_scrollbar));
613 write_setting_i(sesskey, "ScrollBarFullScreen", conf_get_int(conf, CONF_scrollbar_in_fullscreen));
614 write_setting_i(sesskey, "ScrollOnKey", conf_get_int(conf, CONF_scroll_on_key));
615 write_setting_i(sesskey, "ScrollOnDisp", conf_get_int(conf, CONF_scroll_on_disp));
616 write_setting_i(sesskey, "EraseToScrollback", conf_get_int(conf, CONF_erase_to_scrollback));
617 write_setting_i(sesskey, "LockSize", conf_get_int(conf, CONF_resize_action));
618 write_setting_i(sesskey, "BCE", conf_get_int(conf, CONF_bce));
619 write_setting_i(sesskey, "BlinkText", conf_get_int(conf, CONF_blinktext));
620 write_setting_i(sesskey, "X11Forward", conf_get_int(conf, CONF_x11_forward));
621 write_setting_s(sesskey, "X11Display", conf_get_str(conf, CONF_x11_display));
622 write_setting_i(sesskey, "X11AuthType", conf_get_int(conf, CONF_x11_auth));
623 write_setting_filename(sesskey, "X11AuthFile", conf_get_filename(conf, CONF_xauthfile));
624 write_setting_i(sesskey, "LocalPortAcceptAll", conf_get_int(conf, CONF_lport_acceptall));
625 write_setting_i(sesskey, "RemotePortAcceptAll", conf_get_int(conf, CONF_rport_acceptall));
626 wmap(sesskey, "PortForwardings", conf, CONF_portfwd, TRUE);
627 write_setting_i(sesskey, "BugIgnore1", 2-conf_get_int(conf, CONF_sshbug_ignore1));
628 write_setting_i(sesskey, "BugPlainPW1", 2-conf_get_int(conf, CONF_sshbug_plainpw1));
629 write_setting_i(sesskey, "BugRSA1", 2-conf_get_int(conf, CONF_sshbug_rsa1));
630 write_setting_i(sesskey, "BugIgnore2", 2-conf_get_int(conf, CONF_sshbug_ignore2));
631 write_setting_i(sesskey, "BugHMAC2", 2-conf_get_int(conf, CONF_sshbug_hmac2));
632 write_setting_i(sesskey, "BugDeriveKey2", 2-conf_get_int(conf, CONF_sshbug_derivekey2));
633 write_setting_i(sesskey, "BugRSAPad2", 2-conf_get_int(conf, CONF_sshbug_rsapad2));
634 write_setting_i(sesskey, "BugPKSessID2", 2-conf_get_int(conf, CONF_sshbug_pksessid2));
635 write_setting_i(sesskey, "BugRekey2", 2-conf_get_int(conf, CONF_sshbug_rekey2));
636 write_setting_i(sesskey, "BugMaxPkt2", 2-conf_get_int(conf, CONF_sshbug_maxpkt2));
637 write_setting_i(sesskey, "BugOldGex2", 2-conf_get_int(conf, CONF_sshbug_oldgex2));
638 write_setting_i(sesskey, "BugWinadj", 2-conf_get_int(conf, CONF_sshbug_winadj));
639 write_setting_i(sesskey, "BugChanReq", 2-conf_get_int(conf, CONF_sshbug_chanreq));
640 write_setting_i(sesskey, "StampUtmp", conf_get_int(conf, CONF_stamp_utmp));
641 write_setting_i(sesskey, "LoginShell", conf_get_int(conf, CONF_login_shell));
642 write_setting_i(sesskey, "ScrollbarOnLeft", conf_get_int(conf, CONF_scrollbar_on_left));
643 write_setting_fontspec(sesskey, "BoldFont", conf_get_fontspec(conf, CONF_boldfont));
644 write_setting_fontspec(sesskey, "WideFont", conf_get_fontspec(conf, CONF_widefont));
645 write_setting_fontspec(sesskey, "WideBoldFont", conf_get_fontspec(conf, CONF_wideboldfont));
646 write_setting_i(sesskey, "ShadowBold", conf_get_int(conf, CONF_shadowbold));
647 write_setting_i(sesskey, "ShadowBoldOffset", conf_get_int(conf, CONF_shadowboldoffset));
648 write_setting_s(sesskey, "SerialLine", conf_get_str(conf, CONF_serline));
649 write_setting_i(sesskey, "SerialSpeed", conf_get_int(conf, CONF_serspeed));
650 write_setting_i(sesskey, "SerialDataBits", conf_get_int(conf, CONF_serdatabits));
651 write_setting_i(sesskey, "SerialStopHalfbits", conf_get_int(conf, CONF_serstopbits));
652 write_setting_i(sesskey, "SerialParity", conf_get_int(conf, CONF_serparity));
653 write_setting_i(sesskey, "SerialFlowControl", conf_get_int(conf, CONF_serflow));
654 write_setting_s(sesskey, "WindowClass", conf_get_str(conf, CONF_winclass));
655 write_setting_i(sesskey, "ConnectionSharing", conf_get_int(conf, CONF_ssh_connection_sharing));
656 write_setting_i(sesskey, "ConnectionSharingUpstream", conf_get_int(conf, CONF_ssh_connection_sharing_upstream));
657 write_setting_i(sesskey, "ConnectionSharingDownstream", conf_get_int(conf, CONF_ssh_connection_sharing_downstream));
658 wmap(sesskey, "SSHManualHostKeys", conf, CONF_ssh_manual_hostkeys, FALSE);
661 void load_settings(const char *section, Conf *conf)
665 sesskey = open_settings_r(section);
666 load_open_settings(sesskey, conf);
667 close_settings_r(sesskey);
669 if (conf_launchable(conf))
670 add_session_to_jumplist(section);
673 void load_open_settings(void *sesskey, Conf *conf)
678 conf_set_int(conf, CONF_ssh_subsys, 0); /* FIXME: load this properly */
679 conf_set_str(conf, CONF_remote_cmd, "");
680 conf_set_str(conf, CONF_remote_cmd2, "");
681 conf_set_str(conf, CONF_ssh_nc_host, "");
683 gpps(sesskey, "HostName", "", conf, CONF_host);
684 gppfile(sesskey, "LogFileName", conf, CONF_logfilename);
685 gppi(sesskey, "LogType", 0, conf, CONF_logtype);
686 gppi(sesskey, "LogFileClash", LGXF_ASK, conf, CONF_logxfovr);
687 gppi(sesskey, "LogFlush", 1, conf, CONF_logflush);
688 gppi(sesskey, "SSHLogOmitPasswords", 1, conf, CONF_logomitpass);
689 gppi(sesskey, "SSHLogOmitData", 0, conf, CONF_logomitdata);
691 prot = gpps_raw(sesskey, "Protocol", "default");
692 conf_set_int(conf, CONF_protocol, default_protocol);
693 conf_set_int(conf, CONF_port, default_port);
695 const Backend *b = backend_from_name(prot);
697 conf_set_int(conf, CONF_protocol, b->protocol);
698 gppi(sesskey, "PortNumber", default_port, conf, CONF_port);
703 /* Address family selection */
704 gppi(sesskey, "AddressFamily", ADDRTYPE_UNSPEC, conf, CONF_addressfamily);
706 /* The CloseOnExit numbers are arranged in a different order from
707 * the standard FORCE_ON / FORCE_OFF / AUTO. */
708 i = gppi_raw(sesskey, "CloseOnExit", 1); conf_set_int(conf, CONF_close_on_exit, (i+1)%3);
709 gppi(sesskey, "WarnOnClose", 1, conf, CONF_warn_on_close);
711 /* This is two values for backward compatibility with 0.50/0.51 */
712 int pingmin, pingsec;
713 pingmin = gppi_raw(sesskey, "PingInterval", 0);
714 pingsec = gppi_raw(sesskey, "PingIntervalSecs", 0);
715 conf_set_int(conf, CONF_ping_interval, pingmin * 60 + pingsec);
717 gppi(sesskey, "TCPNoDelay", 1, conf, CONF_tcp_nodelay);
718 gppi(sesskey, "TCPKeepalives", 0, conf, CONF_tcp_keepalives);
719 gpps(sesskey, "TerminalType", "xterm", conf, CONF_termtype);
720 gpps(sesskey, "TerminalSpeed", "38400,38400", conf, CONF_termspeed);
721 if (!gppmap(sesskey, "TerminalModes", conf, CONF_ttymodes)) {
722 /* This hardcodes a big set of defaults in any new saved
723 * sessions. Let's hope we don't change our mind. */
724 for (i = 0; ttymodes[i]; i++)
725 conf_set_str_str(conf, CONF_ttymodes, ttymodes[i], "A");
729 gpps(sesskey, "ProxyExcludeList", "", conf, CONF_proxy_exclude_list);
730 i = gppi_raw(sesskey, "ProxyDNS", 1); conf_set_int(conf, CONF_proxy_dns, (i+1)%3);
731 gppi(sesskey, "ProxyLocalhost", 0, conf, CONF_even_proxy_localhost);
732 gppi(sesskey, "ProxyMethod", -1, conf, CONF_proxy_type);
733 if (conf_get_int(conf, CONF_proxy_type) == -1) {
735 i = gppi_raw(sesskey, "ProxyType", 0);
737 conf_set_int(conf, CONF_proxy_type, PROXY_NONE);
739 conf_set_int(conf, CONF_proxy_type, PROXY_HTTP);
741 conf_set_int(conf, CONF_proxy_type, PROXY_TELNET);
743 conf_set_int(conf, CONF_proxy_type, PROXY_CMD);
745 i = gppi_raw(sesskey, "ProxySOCKSVersion", 5);
747 conf_set_int(conf, CONF_proxy_type, PROXY_SOCKS5);
749 conf_set_int(conf, CONF_proxy_type, PROXY_SOCKS4);
752 gpps(sesskey, "ProxyHost", "proxy", conf, CONF_proxy_host);
753 gppi(sesskey, "ProxyPort", 80, conf, CONF_proxy_port);
754 gpps(sesskey, "ProxyUsername", "", conf, CONF_proxy_username);
755 gpps(sesskey, "ProxyPassword", "", conf, CONF_proxy_password);
756 gpps(sesskey, "ProxyTelnetCommand", "connect %host %port\\n",
757 conf, CONF_proxy_telnet_command);
758 gppmap(sesskey, "Environment", conf, CONF_environmt);
759 gpps(sesskey, "UserName", "", conf, CONF_username);
760 gppi(sesskey, "UserNameFromEnvironment", 0, conf, CONF_username_from_env);
761 gpps(sesskey, "LocalUserName", "", conf, CONF_localusername);
762 gppi(sesskey, "NoPTY", 0, conf, CONF_nopty);
763 gppi(sesskey, "Compression", 0, conf, CONF_compression);
764 gppi(sesskey, "TryAgent", 1, conf, CONF_tryagent);
765 gppi(sesskey, "AgentFwd", 0, conf, CONF_agentfwd);
766 gppi(sesskey, "ChangeUsername", 0, conf, CONF_change_username);
767 gppi(sesskey, "GssapiFwd", 0, conf, CONF_gssapifwd);
768 gprefs(sesskey, "Cipher", "\0",
769 ciphernames, CIPHER_MAX, conf, CONF_ssh_cipherlist);
771 /* Backward-compatibility: we used to have an option to
772 * disable gex under the "bugs" panel after one report of
773 * a server which offered it then choked, but we never got
774 * a server version string or any other reports. */
775 const char *default_kexes;
776 i = 2 - gppi_raw(sesskey, "BugDHGEx2", 0);
778 default_kexes = "ecdh,dh-group14-sha1,dh-group1-sha1,rsa,"
781 default_kexes = "ecdh,dh-gex-sha1,dh-group14-sha1,"
782 "dh-group1-sha1,rsa,WARN";
783 gprefs(sesskey, "KEX", default_kexes,
784 kexnames, KEX_MAX, conf, CONF_ssh_kexlist);
786 gppi(sesskey, "RekeyTime", 60, conf, CONF_ssh_rekey_time);
787 gpps(sesskey, "RekeyBytes", "1G", conf, CONF_ssh_rekey_data);
788 /* SSH-2 only by default */
789 gppi(sesskey, "SshProt", 3, conf, CONF_sshprot);
790 gpps(sesskey, "LogHost", "", conf, CONF_loghost);
791 gppi(sesskey, "SSH2DES", 0, conf, CONF_ssh2_des_cbc);
792 gppi(sesskey, "SshNoAuth", 0, conf, CONF_ssh_no_userauth);
793 gppi(sesskey, "SshBanner", 1, conf, CONF_ssh_show_banner);
794 gppi(sesskey, "AuthTIS", 0, conf, CONF_try_tis_auth);
795 gppi(sesskey, "AuthKI", 1, conf, CONF_try_ki_auth);
796 gppi(sesskey, "AuthGSSAPI", 1, conf, CONF_try_gssapi_auth);
798 gprefs(sesskey, "GSSLibs", "\0",
799 gsslibkeywords, ngsslibs, conf, CONF_ssh_gsslist);
800 gppfile(sesskey, "GSSCustom", conf, CONF_ssh_gss_custom);
802 gppi(sesskey, "SshNoShell", 0, conf, CONF_ssh_no_shell);
803 gppfile(sesskey, "PublicKeyFile", conf, CONF_keyfile);
804 gpps(sesskey, "RemoteCommand", "", conf, CONF_remote_cmd);
805 gppi(sesskey, "RFCEnviron", 0, conf, CONF_rfc_environ);
806 gppi(sesskey, "PassiveTelnet", 0, conf, CONF_passive_telnet);
807 gppi(sesskey, "BackspaceIsDelete", 1, conf, CONF_bksp_is_delete);
808 gppi(sesskey, "RXVTHomeEnd", 0, conf, CONF_rxvt_homeend);
809 gppi(sesskey, "LinuxFunctionKeys", 0, conf, CONF_funky_type);
810 gppi(sesskey, "NoApplicationKeys", 0, conf, CONF_no_applic_k);
811 gppi(sesskey, "NoApplicationCursors", 0, conf, CONF_no_applic_c);
812 gppi(sesskey, "NoMouseReporting", 0, conf, CONF_no_mouse_rep);
813 gppi(sesskey, "NoRemoteResize", 0, conf, CONF_no_remote_resize);
814 gppi(sesskey, "NoAltScreen", 0, conf, CONF_no_alt_screen);
815 gppi(sesskey, "NoRemoteWinTitle", 0, conf, CONF_no_remote_wintitle);
817 /* Backward compatibility */
818 int no_remote_qtitle = gppi_raw(sesskey, "NoRemoteQTitle", 1);
819 /* We deliberately interpret the old setting of "no response" as
820 * "empty string". This changes the behaviour, but hopefully for
821 * the better; the user can always recover the old behaviour. */
822 gppi(sesskey, "RemoteQTitleAction",
823 no_remote_qtitle ? TITLE_EMPTY : TITLE_REAL,
824 conf, CONF_remote_qtitle_action);
826 gppi(sesskey, "NoDBackspace", 0, conf, CONF_no_dbackspace);
827 gppi(sesskey, "NoRemoteCharset", 0, conf, CONF_no_remote_charset);
828 gppi(sesskey, "ApplicationCursorKeys", 0, conf, CONF_app_cursor);
829 gppi(sesskey, "ApplicationKeypad", 0, conf, CONF_app_keypad);
830 gppi(sesskey, "NetHackKeypad", 0, conf, CONF_nethack_keypad);
831 gppi(sesskey, "AltF4", 1, conf, CONF_alt_f4);
832 gppi(sesskey, "AltSpace", 0, conf, CONF_alt_space);
833 gppi(sesskey, "AltOnly", 0, conf, CONF_alt_only);
834 gppi(sesskey, "ComposeKey", 0, conf, CONF_compose_key);
835 gppi(sesskey, "CtrlAltKeys", 1, conf, CONF_ctrlaltkeys);
836 gppi(sesskey, "TelnetKey", 0, conf, CONF_telnet_keyboard);
837 gppi(sesskey, "TelnetRet", 1, conf, CONF_telnet_newline);
838 gppi(sesskey, "LocalEcho", AUTO, conf, CONF_localecho);
839 gppi(sesskey, "LocalEdit", AUTO, conf, CONF_localedit);
840 gpps(sesskey, "Answerback", "PuTTY", conf, CONF_answerback);
841 gppi(sesskey, "AlwaysOnTop", 0, conf, CONF_alwaysontop);
842 gppi(sesskey, "FullScreenOnAltEnter", 0, conf, CONF_fullscreenonaltenter);
843 gppi(sesskey, "HideMousePtr", 0, conf, CONF_hide_mouseptr);
844 gppi(sesskey, "SunkenEdge", 0, conf, CONF_sunken_edge);
845 gppi(sesskey, "WindowBorder", 1, conf, CONF_window_border);
846 gppi(sesskey, "CurType", 0, conf, CONF_cursor_type);
847 gppi(sesskey, "BlinkCur", 0, conf, CONF_blink_cur);
848 /* pedantic compiler tells me I can't use conf, CONF_beep as an int * :-) */
849 gppi(sesskey, "Beep", 1, conf, CONF_beep);
850 gppi(sesskey, "BeepInd", 0, conf, CONF_beep_ind);
851 gppfile(sesskey, "BellWaveFile", conf, CONF_bell_wavefile);
852 gppi(sesskey, "BellOverload", 1, conf, CONF_bellovl);
853 gppi(sesskey, "BellOverloadN", 5, conf, CONF_bellovl_n);
854 i = gppi_raw(sesskey, "BellOverloadT", 2*TICKSPERSEC
859 conf_set_int(conf, CONF_bellovl_t, i
864 i = gppi_raw(sesskey, "BellOverloadS", 5*TICKSPERSEC
869 conf_set_int(conf, CONF_bellovl_s, i
874 gppi(sesskey, "ScrollbackLines", 2000, conf, CONF_savelines);
875 gppi(sesskey, "DECOriginMode", 0, conf, CONF_dec_om);
876 gppi(sesskey, "AutoWrapMode", 1, conf, CONF_wrap_mode);
877 gppi(sesskey, "LFImpliesCR", 0, conf, CONF_lfhascr);
878 gppi(sesskey, "CRImpliesLF", 0, conf, CONF_crhaslf);
879 gppi(sesskey, "DisableArabicShaping", 0, conf, CONF_arabicshaping);
880 gppi(sesskey, "DisableBidi", 0, conf, CONF_bidi);
881 gppi(sesskey, "WinNameAlways", 1, conf, CONF_win_name_always);
882 gpps(sesskey, "WinTitle", "", conf, CONF_wintitle);
883 gppi(sesskey, "TermWidth", 80, conf, CONF_width);
884 gppi(sesskey, "TermHeight", 24, conf, CONF_height);
885 gppfont(sesskey, "Font", conf, CONF_font);
886 gppi(sesskey, "FontQuality", FQ_DEFAULT, conf, CONF_font_quality);
887 gppi(sesskey, "FontVTMode", VT_UNICODE, conf, CONF_vtmode);
888 gppi(sesskey, "UseSystemColours", 0, conf, CONF_system_colour);
889 gppi(sesskey, "TryPalette", 0, conf, CONF_try_palette);
890 gppi(sesskey, "ANSIColour", 1, conf, CONF_ansi_colour);
891 gppi(sesskey, "Xterm256Colour", 1, conf, CONF_xterm_256_colour);
892 i = gppi_raw(sesskey, "BoldAsColour", 1); conf_set_int(conf, CONF_bold_style, i+1);
894 for (i = 0; i < 22; i++) {
895 static const char *const defaults[] = {
896 "187,187,187", "255,255,255", "0,0,0", "85,85,85", "0,0,0",
897 "0,255,0", "0,0,0", "85,85,85", "187,0,0", "255,85,85",
898 "0,187,0", "85,255,85", "187,187,0", "255,255,85", "0,0,187",
899 "85,85,255", "187,0,187", "255,85,255", "0,187,187",
900 "85,255,255", "187,187,187", "255,255,255"
904 sprintf(buf, "Colour%d", i);
905 buf2 = gpps_raw(sesskey, buf, defaults[i]);
906 if (sscanf(buf2, "%d,%d,%d", &c0, &c1, &c2) == 3) {
907 conf_set_int_int(conf, CONF_colours, i*3+0, c0);
908 conf_set_int_int(conf, CONF_colours, i*3+1, c1);
909 conf_set_int_int(conf, CONF_colours, i*3+2, c2);
913 gppi(sesskey, "RawCNP", 0, conf, CONF_rawcnp);
914 gppi(sesskey, "PasteRTF", 0, conf, CONF_rtf_paste);
915 gppi(sesskey, "MouseIsXterm", 0, conf, CONF_mouse_is_xterm);
916 gppi(sesskey, "RectSelect", 0, conf, CONF_rect_select);
917 gppi(sesskey, "MouseOverride", 1, conf, CONF_mouse_override);
918 for (i = 0; i < 256; i += 32) {
919 static const char *const defaults[] = {
920 "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0",
921 "0,1,2,1,1,1,1,1,1,1,1,1,1,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1,1",
922 "1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,2",
923 "1,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,1,1,1,1",
924 "1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
925 "1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1",
926 "2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2",
927 "2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,1,2,2,2,2,2,2,2,2"
929 char buf[20], *buf2, *p;
931 sprintf(buf, "Wordness%d", i);
932 buf2 = gpps_raw(sesskey, buf, defaults[i / 32]);
934 for (j = i; j < i + 32; j++) {
936 while (*p && *p != ',')
940 conf_set_int_int(conf, CONF_wordness, j, atoi(q));
945 * The empty default for LineCodePage will be converted later
946 * into a plausible default for the locale.
948 gpps(sesskey, "LineCodePage", "", conf, CONF_line_codepage);
949 gppi(sesskey, "CJKAmbigWide", 0, conf, CONF_cjk_ambig_wide);
950 gppi(sesskey, "UTF8Override", 1, conf, CONF_utf8_override);
951 gpps(sesskey, "Printer", "", conf, CONF_printer);
952 gppi(sesskey, "CapsLockCyr", 0, conf, CONF_xlat_capslockcyr);
953 gppi(sesskey, "ScrollBar", 1, conf, CONF_scrollbar);
954 gppi(sesskey, "ScrollBarFullScreen", 0, conf, CONF_scrollbar_in_fullscreen);
955 gppi(sesskey, "ScrollOnKey", 0, conf, CONF_scroll_on_key);
956 gppi(sesskey, "ScrollOnDisp", 1, conf, CONF_scroll_on_disp);
957 gppi(sesskey, "EraseToScrollback", 1, conf, CONF_erase_to_scrollback);
958 gppi(sesskey, "LockSize", 0, conf, CONF_resize_action);
959 gppi(sesskey, "BCE", 1, conf, CONF_bce);
960 gppi(sesskey, "BlinkText", 0, conf, CONF_blinktext);
961 gppi(sesskey, "X11Forward", 0, conf, CONF_x11_forward);
962 gpps(sesskey, "X11Display", "", conf, CONF_x11_display);
963 gppi(sesskey, "X11AuthType", X11_MIT, conf, CONF_x11_auth);
964 gppfile(sesskey, "X11AuthFile", conf, CONF_xauthfile);
966 gppi(sesskey, "LocalPortAcceptAll", 0, conf, CONF_lport_acceptall);
967 gppi(sesskey, "RemotePortAcceptAll", 0, conf, CONF_rport_acceptall);
968 gppmap(sesskey, "PortForwardings", conf, CONF_portfwd);
969 i = gppi_raw(sesskey, "BugIgnore1", 0); conf_set_int(conf, CONF_sshbug_ignore1, 2-i);
970 i = gppi_raw(sesskey, "BugPlainPW1", 0); conf_set_int(conf, CONF_sshbug_plainpw1, 2-i);
971 i = gppi_raw(sesskey, "BugRSA1", 0); conf_set_int(conf, CONF_sshbug_rsa1, 2-i);
972 i = gppi_raw(sesskey, "BugIgnore2", 0); conf_set_int(conf, CONF_sshbug_ignore2, 2-i);
975 i = gppi_raw(sesskey, "BugHMAC2", 0); conf_set_int(conf, CONF_sshbug_hmac2, 2-i);
977 i = gppi_raw(sesskey, "BuggyMAC", 0);
979 conf_set_int(conf, CONF_sshbug_hmac2, FORCE_ON);
982 i = gppi_raw(sesskey, "BugDeriveKey2", 0); conf_set_int(conf, CONF_sshbug_derivekey2, 2-i);
983 i = gppi_raw(sesskey, "BugRSAPad2", 0); conf_set_int(conf, CONF_sshbug_rsapad2, 2-i);
984 i = gppi_raw(sesskey, "BugPKSessID2", 0); conf_set_int(conf, CONF_sshbug_pksessid2, 2-i);
985 i = gppi_raw(sesskey, "BugRekey2", 0); conf_set_int(conf, CONF_sshbug_rekey2, 2-i);
986 i = gppi_raw(sesskey, "BugMaxPkt2", 0); conf_set_int(conf, CONF_sshbug_maxpkt2, 2-i);
987 i = gppi_raw(sesskey, "BugOldGex2", 0); conf_set_int(conf, CONF_sshbug_oldgex2, 2-i);
988 i = gppi_raw(sesskey, "BugWinadj", 0); conf_set_int(conf, CONF_sshbug_winadj, 2-i);
989 i = gppi_raw(sesskey, "BugChanReq", 0); conf_set_int(conf, CONF_sshbug_chanreq, 2-i);
990 conf_set_int(conf, CONF_ssh_simple, FALSE);
991 gppi(sesskey, "StampUtmp", 1, conf, CONF_stamp_utmp);
992 gppi(sesskey, "LoginShell", 1, conf, CONF_login_shell);
993 gppi(sesskey, "ScrollbarOnLeft", 0, conf, CONF_scrollbar_on_left);
994 gppi(sesskey, "ShadowBold", 0, conf, CONF_shadowbold);
995 gppfont(sesskey, "BoldFont", conf, CONF_boldfont);
996 gppfont(sesskey, "WideFont", conf, CONF_widefont);
997 gppfont(sesskey, "WideBoldFont", conf, CONF_wideboldfont);
998 gppi(sesskey, "ShadowBoldOffset", 1, conf, CONF_shadowboldoffset);
999 gpps(sesskey, "SerialLine", "", conf, CONF_serline);
1000 gppi(sesskey, "SerialSpeed", 9600, conf, CONF_serspeed);
1001 gppi(sesskey, "SerialDataBits", 8, conf, CONF_serdatabits);
1002 gppi(sesskey, "SerialStopHalfbits", 2, conf, CONF_serstopbits);
1003 gppi(sesskey, "SerialParity", SER_PAR_NONE, conf, CONF_serparity);
1004 gppi(sesskey, "SerialFlowControl", SER_FLOW_XONXOFF, conf, CONF_serflow);
1005 gpps(sesskey, "WindowClass", "", conf, CONF_winclass);
1006 gppi(sesskey, "ConnectionSharing", 0, conf, CONF_ssh_connection_sharing);
1007 gppi(sesskey, "ConnectionSharingUpstream", 1, conf, CONF_ssh_connection_sharing_upstream);
1008 gppi(sesskey, "ConnectionSharingDownstream", 1, conf, CONF_ssh_connection_sharing_downstream);
1009 gppmap(sesskey, "SSHManualHostKeys", conf, CONF_ssh_manual_hostkeys);
1012 void do_defaults(const char *session, Conf *conf)
1014 load_settings(session, conf);
1017 static int sessioncmp(const void *av, const void *bv)
1019 const char *a = *(const char *const *) av;
1020 const char *b = *(const char *const *) bv;
1023 * Alphabetical order, except that "Default Settings" is a
1024 * special case and comes first.
1026 if (!strcmp(a, "Default Settings"))
1027 return -1; /* a comes first */
1028 if (!strcmp(b, "Default Settings"))
1029 return +1; /* b comes first */
1031 * FIXME: perhaps we should ignore the first & in determining
1034 return strcmp(a, b); /* otherwise, compare normally */
1037 void get_sesslist(struct sesslist *list, int allocate)
1039 char otherbuf[2048];
1040 int buflen, bufsize, i;
1046 buflen = bufsize = 0;
1047 list->buffer = NULL;
1048 if ((handle = enum_settings_start()) != NULL) {
1050 ret = enum_settings_next(handle, otherbuf, sizeof(otherbuf));
1052 int len = strlen(otherbuf) + 1;
1053 if (bufsize < buflen + len) {
1054 bufsize = buflen + len + 2048;
1055 list->buffer = sresize(list->buffer, bufsize, char);
1057 strcpy(list->buffer + buflen, otherbuf);
1058 buflen += strlen(list->buffer + buflen) + 1;
1061 enum_settings_finish(handle);
1063 list->buffer = sresize(list->buffer, buflen + 1, char);
1064 list->buffer[buflen] = '\0';
1067 * Now set up the list of sessions. Note that "Default
1068 * Settings" must always be claimed to exist, even if it
1073 list->nsessions = 1; /* "Default Settings" counts as one */
1075 if (strcmp(p, "Default Settings"))
1082 list->sessions = snewn(list->nsessions + 1, const char *);
1083 list->sessions[0] = "Default Settings";
1087 if (strcmp(p, "Default Settings"))
1088 list->sessions[i++] = p;
1094 qsort(list->sessions, i, sizeof(const char *), sessioncmp);
1096 sfree(list->buffer);
1097 sfree(list->sessions);
1098 list->buffer = NULL;
1099 list->sessions = NULL;