sound/usb/line6/podhd.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * Line 6 Pod HD
   4  *
   5  * Copyright (C) 2011 Stefan Hajnoczi <stefanha@gmail.com>
   6  * Copyright (C) 2015 Andrej Krutak <dev@andree.sk>
   7  * Copyright (C) 2017 Hans P. Moller <hmoller@uc.cl>
   8  */
   9
  10 #include <linux/usb.h>
  11 #include <linux/slab.h>
  12 #include <linux/module.h>
  13 #include <sound/core.h>
  14 #include <sound/pcm.h>
  15
  16 #include "driver.h"
  17 #include "pcm.h"
  18
  19 #define PODHD_STARTUP_DELAY 500
  20
  21 enum {
  22         LINE6_PODHD300,
  23         LINE6_PODHD400,
  24         LINE6_PODHD500_0,
  25         LINE6_PODHD500_1,
  26         LINE6_PODX3,
  27         LINE6_PODX3LIVE,
  28         LINE6_PODHD500X,
  29         LINE6_PODHDDESKTOP
  30 };
  31
  32 struct usb_line6_podhd {
  33         /* Generic Line 6 USB data */
  34         struct usb_line6 line6;
  35
  36         /* Serial number of device */
  37         u32 serial_number;
  38
  39         /* Firmware version */
  40         int firmware_version;
  41 };
  42
  43 #define line6_to_podhd(x)       container_of(x, struct usb_line6_podhd, line6)
  44
  45 static struct snd_ratden podhd_ratden = {
  46         .num_min = 48000,
  47         .num_max = 48000,
  48         .num_step = 1,
  49         .den = 1,
  50 };
  51
  52 static struct line6_pcm_properties podhd_pcm_properties = {
  53         .playback_hw = {
  54                                   .info = (SNDRV_PCM_INFO_MMAP |
  55                                            SNDRV_PCM_INFO_INTERLEAVED |
  56                                            SNDRV_PCM_INFO_BLOCK_TRANSFER |
  57                                            SNDRV_PCM_INFO_MMAP_VALID |
  58                                            SNDRV_PCM_INFO_PAUSE |
  59                                            SNDRV_PCM_INFO_SYNC_START),
  60                                   .formats = SNDRV_PCM_FMTBIT_S24_3LE,
  61                                   .rates = SNDRV_PCM_RATE_48000,
  62                                   .rate_min = 48000,
  63                                   .rate_max = 48000,
  64                                   .channels_min = 2,
  65                                   .channels_max = 2,
  66                                   .buffer_bytes_max = 60000,
  67                                   .period_bytes_min = 64,
  68                                   .period_bytes_max = 8192,
  69                                   .periods_min = 1,
  70                                   .periods_max = 1024},
  71         .capture_hw = {
  72                                  .info = (SNDRV_PCM_INFO_MMAP |
  73                                           SNDRV_PCM_INFO_INTERLEAVED |
  74                                           SNDRV_PCM_INFO_BLOCK_TRANSFER |
  75                                           SNDRV_PCM_INFO_MMAP_VALID |
  76                                           SNDRV_PCM_INFO_SYNC_START),
  77                                  .formats = SNDRV_PCM_FMTBIT_S24_3LE,
  78                                  .rates = SNDRV_PCM_RATE_48000,
  79                                  .rate_min = 48000,
  80                                  .rate_max = 48000,
  81                                  .channels_min = 2,
  82                                  .channels_max = 2,
  83                                  .buffer_bytes_max = 60000,
  84                                  .period_bytes_min = 64,
  85                                  .period_bytes_max = 8192,
  86                                  .periods_min = 1,
  87                                  .periods_max = 1024},
  88         .rates = {
  89                             .nrats = 1,
  90                             .rats = &podhd_ratden},
  91         .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
  92 };
  93
  94 static struct line6_pcm_properties podx3_pcm_properties = {
  95         .playback_hw = {
  96                                   .info = (SNDRV_PCM_INFO_MMAP |
  97                                            SNDRV_PCM_INFO_INTERLEAVED |
  98                                            SNDRV_PCM_INFO_BLOCK_TRANSFER |
  99                                            SNDRV_PCM_INFO_MMAP_VALID |
 100                                            SNDRV_PCM_INFO_PAUSE |
 101                                            SNDRV_PCM_INFO_SYNC_START),
 102                                   .formats = SNDRV_PCM_FMTBIT_S24_3LE,
 103                                   .rates = SNDRV_PCM_RATE_48000,
 104                                   .rate_min = 48000,
 105                                   .rate_max = 48000,
 106                                   .channels_min = 2,
 107                                   .channels_max = 2,
 108                                   .buffer_bytes_max = 60000,
 109                                   .period_bytes_min = 64,
 110                                   .period_bytes_max = 8192,
 111                                   .periods_min = 1,
 112                                   .periods_max = 1024},
 113         .capture_hw = {
 114                                  .info = (SNDRV_PCM_INFO_MMAP |
 115                                           SNDRV_PCM_INFO_INTERLEAVED |
 116                                           SNDRV_PCM_INFO_BLOCK_TRANSFER |
 117                                           SNDRV_PCM_INFO_MMAP_VALID |
 118                                           SNDRV_PCM_INFO_SYNC_START),
 119                                  .formats = SNDRV_PCM_FMTBIT_S24_3LE,
 120                                  .rates = SNDRV_PCM_RATE_48000,
 121                                  .rate_min = 48000,
 122                                  .rate_max = 48000,
 123                                  /* 1+2: Main signal (out), 3+4: Tone 1,
 124                                   * 5+6: Tone 2, 7+8: raw
 125                                   */
 126                                  .channels_min = 8,
 127                                  .channels_max = 8,
 128                                  .buffer_bytes_max = 60000,
 129                                  .period_bytes_min = 64,
 130                                  .period_bytes_max = 8192,
 131                                  .periods_min = 1,
 132                                  .periods_max = 1024},
 133         .rates = {
 134                             .nrats = 1,
 135                             .rats = &podhd_ratden},
 136         .bytes_per_channel = 3 /* SNDRV_PCM_FMTBIT_S24_3LE */
 137 };
 138 static struct usb_driver podhd_driver;
 139
 140 static ssize_t serial_number_show(struct device *dev,
 141                                   struct device_attribute *attr, char *buf)
 142 {
 143         struct snd_card *card = dev_to_snd_card(dev);
 144         struct usb_line6_podhd *pod = card->private_data;
 145
 146         return sprintf(buf, "%u\n", pod->serial_number);
 147 }
 148
 149 static ssize_t firmware_version_show(struct device *dev,
 150                                      struct device_attribute *attr, char *buf)
 151 {
 152         struct snd_card *card = dev_to_snd_card(dev);
 153         struct usb_line6_podhd *pod = card->private_data;
 154
 155         return sprintf(buf, "%06x\n", pod->firmware_version);
 156 }
 157
 158 static DEVICE_ATTR_RO(firmware_version);
 159 static DEVICE_ATTR_RO(serial_number);
 160
 161 static struct attribute *podhd_dev_attrs[] = {
 162         &dev_attr_firmware_version.attr,
 163         &dev_attr_serial_number.attr,
 164         NULL
 165 };
 166
 167 static const struct attribute_group podhd_dev_attr_group = {
 168         .name = "podhd",
 169         .attrs = podhd_dev_attrs,
 170 };
 171
 172 /*
 173  * POD X3 startup procedure.
 174  *
 175  * May be compatible with other POD HD's, since it's also similar to the
 176  * previous POD setup. In any case, it doesn't seem to be required for the
 177  * audio nor bulk interfaces to work.
 178  */
 179
 180 static int podhd_dev_start(struct usb_line6_podhd *pod)
 181 {
 182         int ret;
 183         u8 *init_bytes;
 184         int i;
 185         struct usb_device *usbdev = pod->line6.usbdev;
 186
 187         init_bytes = kmalloc(8, GFP_KERNEL);
 188         if (!init_bytes)
 189                 return -ENOMEM;
 190
 191         ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0),
 192                                         0x67, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_OUT,
 193                                         0x11, 0,
 194                                         NULL, 0, LINE6_TIMEOUT * HZ);
 195         if (ret < 0) {
 196                 dev_err(pod->line6.ifcdev, "read request failed (error %d)\n", ret);
 197                 goto exit;
 198         }
 199
 200         /* NOTE: looks like some kind of ping message */
 201         ret = usb_control_msg(usbdev, usb_rcvctrlpipe(usbdev, 0), 0x67,
 202                                         USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
 203                                         0x11, 0x0,
 204                                         init_bytes, 3, LINE6_TIMEOUT * HZ);
 205         if (ret < 0) {
 206                 dev_err(pod->line6.ifcdev,
 207                         "receive length failed (error %d)\n", ret);
 208                 goto exit;
 209         }
 210
 211         pod->firmware_version =
 212                 (init_bytes[0] << 16) | (init_bytes[1] << 8) | (init_bytes[2] << 0);
 213
 214         for (i = 0; i <= 16; i++) {
 215                 ret = line6_read_data(&pod->line6, 0xf000 + 0x08 * i, init_bytes, 8);
 216                 if (ret < 0)
 217                         goto exit;
 218         }
 219
 220         ret = usb_control_msg(usbdev, usb_sndctrlpipe(usbdev, 0),
 221                                         USB_REQ_SET_FEATURE,
 222                                         USB_TYPE_STANDARD | USB_RECIP_DEVICE | USB_DIR_OUT,
 223                                         1, 0,
 224                                         NULL, 0, LINE6_TIMEOUT * HZ);
 225 exit:
 226         kfree(init_bytes);
 227         return ret;
 228 }
 229
 230 static void podhd_startup(struct usb_line6 *line6)
 231 {
 232         struct usb_line6_podhd *pod = line6_to_podhd(line6);
 233
 234         podhd_dev_start(pod);
 235         line6_read_serial_number(&pod->line6, &pod->serial_number);
 236         if (snd_card_register(line6->card))
 237                 dev_err(line6->ifcdev, "Failed to register POD HD card.\n");
 238 }
 239
 240 static void podhd_disconnect(struct usb_line6 *line6)
 241 {
 242         struct usb_line6_podhd *pod = line6_to_podhd(line6);
 243
 244         if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL_INFO) {
 245                 struct usb_interface *intf;
 246
 247                 intf = usb_ifnum_to_if(line6->usbdev,
 248                                         pod->line6.properties->ctrl_if);
 249                 if (intf)
 250                         usb_driver_release_interface(&podhd_driver, intf);
 251         }
 252 }
 253
 254 /*
 255         Try to init POD HD device.
 256 */
 257 static int podhd_init(struct usb_line6 *line6,
 258                       const struct usb_device_id *id)
 259 {
 260         int err;
 261         struct usb_line6_podhd *pod = line6_to_podhd(line6);
 262         struct usb_interface *intf;
 263
 264         line6->disconnect = podhd_disconnect;
 265         line6->startup = podhd_startup;
 266
 267         if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL) {
 268                 /* claim the data interface */
 269                 intf = usb_ifnum_to_if(line6->usbdev,
 270                                         pod->line6.properties->ctrl_if);
 271                 if (!intf) {
 272                         dev_err(pod->line6.ifcdev, "interface %d not found\n",
 273                                 pod->line6.properties->ctrl_if);
 274                         return -ENODEV;
 275                 }
 276
 277                 err = usb_driver_claim_interface(&podhd_driver, intf, NULL);
 278                 if (err != 0) {
 279                         dev_err(pod->line6.ifcdev, "can't claim interface %d, error %d\n",
 280                                 pod->line6.properties->ctrl_if, err);
 281                         return err;
 282                 }
 283         }
 284
 285         if (pod->line6.properties->capabilities & LINE6_CAP_CONTROL_INFO) {
 286                 /* create sysfs entries: */
 287                 err = snd_card_add_dev_attr(line6->card, &podhd_dev_attr_group);
 288                 if (err < 0)
 289                         return err;
 290         }
 291
 292         if (pod->line6.properties->capabilities & LINE6_CAP_PCM) {
 293                 /* initialize PCM subsystem: */
 294                 err = line6_init_pcm(line6,
 295                         (id->driver_info == LINE6_PODX3 ||
 296                         id->driver_info == LINE6_PODX3LIVE) ? &podx3_pcm_properties :
 297                         &podhd_pcm_properties);
 298                 if (err < 0)
 299                         return err;
 300         }
 301
 302         if (!(pod->line6.properties->capabilities & LINE6_CAP_CONTROL_INFO)) {
 303                 /* register USB audio system directly */
 304                 return snd_card_register(line6->card);
 305         }
 306
 307         /* init device and delay registering */
 308         schedule_delayed_work(&line6->startup_work,
 309                               msecs_to_jiffies(PODHD_STARTUP_DELAY));
 310         return 0;
 311 }
 312
 313 #define LINE6_DEVICE(prod) USB_DEVICE(0x0e41, prod)
 314 #define LINE6_IF_NUM(prod, n) USB_DEVICE_INTERFACE_NUMBER(0x0e41, prod, n)
 315
 316 /* table of devices that work with this driver */
 317 static const struct usb_device_id podhd_id_table[] = {
 318         /* TODO: no need to alloc data interfaces when only audio is used */
 319         { LINE6_DEVICE(0x5057),    .driver_info = LINE6_PODHD300 },
 320         { LINE6_DEVICE(0x5058),    .driver_info = LINE6_PODHD400 },
 321         { LINE6_IF_NUM(0x414D, 0), .driver_info = LINE6_PODHD500_0 },
 322         { LINE6_IF_NUM(0x414D, 1), .driver_info = LINE6_PODHD500_1 },
 323         { LINE6_IF_NUM(0x414A, 0), .driver_info = LINE6_PODX3 },
 324         { LINE6_IF_NUM(0x414B, 0), .driver_info = LINE6_PODX3LIVE },
 325         { LINE6_IF_NUM(0x4159, 0), .driver_info = LINE6_PODHD500X },
 326         { LINE6_IF_NUM(0x4156, 0), .driver_info = LINE6_PODHDDESKTOP },
 327         {}
 328 };
 329
 330 MODULE_DEVICE_TABLE(usb, podhd_id_table);
 331
 332 static const struct line6_properties podhd_properties_table[] = {
 333         [LINE6_PODHD300] = {
 334                 .id = "PODHD300",
 335                 .name = "POD HD300",
 336                 .capabilities   = LINE6_CAP_PCM
 337                                 | LINE6_CAP_HWMON,
 338                 .altsetting = 5,
 339                 .ep_ctrl_r = 0x84,
 340                 .ep_ctrl_w = 0x03,
 341                 .ep_audio_r = 0x82,
 342                 .ep_audio_w = 0x01,
 343         },
 344         [LINE6_PODHD400] = {
 345                 .id = "PODHD400",
 346                 .name = "POD HD400",
 347                 .capabilities   = LINE6_CAP_PCM
 348                                 | LINE6_CAP_HWMON,
 349                 .altsetting = 5,
 350                 .ep_ctrl_r = 0x84,
 351                 .ep_ctrl_w = 0x03,
 352                 .ep_audio_r = 0x82,
 353                 .ep_audio_w = 0x01,
 354         },
 355         [LINE6_PODHD500_0] = {
 356                 .id = "PODHD500",
 357                 .name = "POD HD500",
 358                 .capabilities   = LINE6_CAP_PCM
 359                                 | LINE6_CAP_HWMON,
 360                 .altsetting = 1,
 361                 .ep_ctrl_r = 0x81,
 362                 .ep_ctrl_w = 0x01,
 363                 .ep_audio_r = 0x86,
 364                 .ep_audio_w = 0x02,
 365         },
 366         [LINE6_PODHD500_1] = {
 367                 .id = "PODHD500",
 368                 .name = "POD HD500",
 369                 .capabilities   = LINE6_CAP_PCM
 370                                 | LINE6_CAP_HWMON,
 371                 .altsetting = 0,
 372                 .ep_ctrl_r = 0x81,
 373                 .ep_ctrl_w = 0x01,
 374                 .ep_audio_r = 0x86,
 375                 .ep_audio_w = 0x02,
 376         },
 377         [LINE6_PODX3] = {
 378                 .id = "PODX3",
 379                 .name = "POD X3",
 380                 .capabilities   = LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_INFO
 381                                 | LINE6_CAP_PCM | LINE6_CAP_HWMON | LINE6_CAP_IN_NEEDS_OUT,
 382                 .altsetting = 1,
 383                 .ep_ctrl_r = 0x81,
 384                 .ep_ctrl_w = 0x01,
 385                 .ctrl_if = 1,
 386                 .ep_audio_r = 0x86,
 387                 .ep_audio_w = 0x02,
 388         },
 389         [LINE6_PODX3LIVE] = {
 390                 .id = "PODX3LIVE",
 391                 .name = "POD X3 LIVE",
 392                 .capabilities   = LINE6_CAP_CONTROL | LINE6_CAP_CONTROL_INFO
 393                                 | LINE6_CAP_PCM | LINE6_CAP_HWMON | LINE6_CAP_IN_NEEDS_OUT,
 394                 .altsetting = 1,
 395                 .ep_ctrl_r = 0x81,
 396                 .ep_ctrl_w = 0x01,
 397                 .ctrl_if = 1,
 398                 .ep_audio_r = 0x86,
 399                 .ep_audio_w = 0x02,
 400         },
 401         [LINE6_PODHD500X] = {
 402                 .id = "PODHD500X",
 403                 .name = "POD HD500X",
 404                 .capabilities   = LINE6_CAP_CONTROL
 405                                 | LINE6_CAP_PCM | LINE6_CAP_HWMON,
 406                 .altsetting = 1,
 407                 .ep_ctrl_r = 0x81,
 408                 .ep_ctrl_w = 0x01,
 409                 .ctrl_if = 1,
 410                 .ep_audio_r = 0x86,
 411                 .ep_audio_w = 0x02,
 412         },
 413         [LINE6_PODHDDESKTOP] = {
 414                 .id = "PODHDDESKTOP",
 415                 .name = "POD HDDESKTOP",
 416                 .capabilities    = LINE6_CAP_CONTROL
 417                         | LINE6_CAP_PCM | LINE6_CAP_HWMON,
 418                 .altsetting = 1,
 419                 .ep_ctrl_r = 0x81,
 420                 .ep_ctrl_w = 0x01,
 421                 .ctrl_if = 1,
 422                 .ep_audio_r = 0x86,
 423                 .ep_audio_w = 0x02,
 424         },
 425 };
 426
 427 /*
 428         Probe USB device.
 429 */
 430 static int podhd_probe(struct usb_interface *interface,
 431                        const struct usb_device_id *id)
 432 {
 433         return line6_probe(interface, id, "Line6-PODHD",
 434                            &podhd_properties_table[id->driver_info],
 435                            podhd_init, sizeof(struct usb_line6_podhd));
 436 }
 437
 438 static struct usb_driver podhd_driver = {
 439         .name = KBUILD_MODNAME,
 440         .probe = podhd_probe,
 441         .disconnect = line6_disconnect,
 442 #ifdef CONFIG_PM
 443         .suspend = line6_suspend,
 444         .resume = line6_resume,
 445         .reset_resume = line6_resume,
 446 #endif
 447         .id_table = podhd_id_table,
 448 };
 449
 450 module_usb_driver(podhd_driver);
 451
 452 MODULE_DESCRIPTION("Line 6 PODHD USB driver");
 453 MODULE_LICENSE("GPL");