17 #define SSH1_MSG_DISCONNECT 1 /* 0x1 */
18 #define SSH1_SMSG_PUBLIC_KEY 2 /* 0x2 */
19 #define SSH1_CMSG_SESSION_KEY 3 /* 0x3 */
20 #define SSH1_CMSG_USER 4 /* 0x4 */
21 #define SSH1_CMSG_AUTH_RSA 6 /* 0x6 */
22 #define SSH1_SMSG_AUTH_RSA_CHALLENGE 7 /* 0x7 */
23 #define SSH1_CMSG_AUTH_RSA_RESPONSE 8 /* 0x8 */
24 #define SSH1_CMSG_AUTH_PASSWORD 9 /* 0x9 */
25 #define SSH1_CMSG_REQUEST_PTY 10 /* 0xa */
26 #define SSH1_CMSG_WINDOW_SIZE 11 /* 0xb */
27 #define SSH1_CMSG_EXEC_SHELL 12 /* 0xc */
28 #define SSH1_CMSG_EXEC_CMD 13 /* 0xd */
29 #define SSH1_SMSG_SUCCESS 14 /* 0xe */
30 #define SSH1_SMSG_FAILURE 15 /* 0xf */
31 #define SSH1_CMSG_STDIN_DATA 16 /* 0x10 */
32 #define SSH1_SMSG_STDOUT_DATA 17 /* 0x11 */
33 #define SSH1_SMSG_STDERR_DATA 18 /* 0x12 */
34 #define SSH1_CMSG_EOF 19 /* 0x13 */
35 #define SSH1_SMSG_EXIT_STATUS 20 /* 0x14 */
36 #define SSH1_MSG_CHANNEL_OPEN_CONFIRMATION 21 /* 0x15 */
37 #define SSH1_MSG_CHANNEL_OPEN_FAILURE 22 /* 0x16 */
38 #define SSH1_MSG_CHANNEL_DATA 23 /* 0x17 */
39 #define SSH1_MSG_CHANNEL_CLOSE 24 /* 0x18 */
40 #define SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION 25 /* 0x19 */
41 #define SSH1_SMSG_X11_OPEN 27 /* 0x1b */
42 #define SSH1_CMSG_PORT_FORWARD_REQUEST 28 /* 0x1c */
43 #define SSH1_MSG_PORT_OPEN 29 /* 0x1d */
44 #define SSH1_CMSG_AGENT_REQUEST_FORWARDING 30 /* 0x1e */
45 #define SSH1_SMSG_AGENT_OPEN 31 /* 0x1f */
46 #define SSH1_MSG_IGNORE 32 /* 0x20 */
47 #define SSH1_CMSG_EXIT_CONFIRMATION 33 /* 0x21 */
48 #define SSH1_CMSG_X11_REQUEST_FORWARDING 34 /* 0x22 */
49 #define SSH1_CMSG_AUTH_RHOSTS_RSA 35 /* 0x23 */
50 #define SSH1_MSG_DEBUG 36 /* 0x24 */
51 #define SSH1_CMSG_REQUEST_COMPRESSION 37 /* 0x25 */
52 #define SSH1_CMSG_AUTH_TIS 39 /* 0x27 */
53 #define SSH1_SMSG_AUTH_TIS_CHALLENGE 40 /* 0x28 */
54 #define SSH1_CMSG_AUTH_TIS_RESPONSE 41 /* 0x29 */
55 #define SSH1_CMSG_AUTH_CCARD 70 /* 0x46 */
56 #define SSH1_SMSG_AUTH_CCARD_CHALLENGE 71 /* 0x47 */
57 #define SSH1_CMSG_AUTH_CCARD_RESPONSE 72 /* 0x48 */
59 #define SSH1_AUTH_TIS 5 /* 0x5 */
60 #define SSH1_AUTH_CCARD 16 /* 0x10 */
62 #define SSH1_PROTOFLAG_SCREEN_NUMBER 1 /* 0x1 */
63 /* Mask for protoflags we will echo back to server if seen */
64 #define SSH1_PROTOFLAGS_SUPPORTED 0 /* 0x1 */
66 #define SSH2_MSG_DISCONNECT 1 /* 0x1 */
67 #define SSH2_MSG_IGNORE 2 /* 0x2 */
68 #define SSH2_MSG_UNIMPLEMENTED 3 /* 0x3 */
69 #define SSH2_MSG_DEBUG 4 /* 0x4 */
70 #define SSH2_MSG_SERVICE_REQUEST 5 /* 0x5 */
71 #define SSH2_MSG_SERVICE_ACCEPT 6 /* 0x6 */
72 #define SSH2_MSG_KEXINIT 20 /* 0x14 */
73 #define SSH2_MSG_NEWKEYS 21 /* 0x15 */
74 #define SSH2_MSG_KEXDH_INIT 30 /* 0x1e */
75 #define SSH2_MSG_KEXDH_REPLY 31 /* 0x1f */
76 #define SSH2_MSG_KEX_DH_GEX_REQUEST 30 /* 0x1e */
77 #define SSH2_MSG_KEX_DH_GEX_GROUP 31 /* 0x1f */
78 #define SSH2_MSG_KEX_DH_GEX_INIT 32 /* 0x20 */
79 #define SSH2_MSG_KEX_DH_GEX_REPLY 33 /* 0x21 */
80 #define SSH2_MSG_USERAUTH_REQUEST 50 /* 0x32 */
81 #define SSH2_MSG_USERAUTH_FAILURE 51 /* 0x33 */
82 #define SSH2_MSG_USERAUTH_SUCCESS 52 /* 0x34 */
83 #define SSH2_MSG_USERAUTH_BANNER 53 /* 0x35 */
84 #define SSH2_MSG_USERAUTH_PK_OK 60 /* 0x3c */
85 #define SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ 60 /* 0x3c */
86 #define SSH2_MSG_USERAUTH_INFO_REQUEST 60 /* 0x3c */
87 #define SSH2_MSG_USERAUTH_INFO_RESPONSE 61 /* 0x3d */
88 #define SSH2_MSG_GLOBAL_REQUEST 80 /* 0x50 */
89 #define SSH2_MSG_REQUEST_SUCCESS 81 /* 0x51 */
90 #define SSH2_MSG_REQUEST_FAILURE 82 /* 0x52 */
91 #define SSH2_MSG_CHANNEL_OPEN 90 /* 0x5a */
92 #define SSH2_MSG_CHANNEL_OPEN_CONFIRMATION 91 /* 0x5b */
93 #define SSH2_MSG_CHANNEL_OPEN_FAILURE 92 /* 0x5c */
94 #define SSH2_MSG_CHANNEL_WINDOW_ADJUST 93 /* 0x5d */
95 #define SSH2_MSG_CHANNEL_DATA 94 /* 0x5e */
96 #define SSH2_MSG_CHANNEL_EXTENDED_DATA 95 /* 0x5f */
97 #define SSH2_MSG_CHANNEL_EOF 96 /* 0x60 */
98 #define SSH2_MSG_CHANNEL_CLOSE 97 /* 0x61 */
99 #define SSH2_MSG_CHANNEL_REQUEST 98 /* 0x62 */
100 #define SSH2_MSG_CHANNEL_SUCCESS 99 /* 0x63 */
101 #define SSH2_MSG_CHANNEL_FAILURE 100 /* 0x64 */
104 * Packet type contexts, so that ssh2_pkt_type can correctly decode
105 * the ambiguous type numbers back into the correct type strings.
107 #define SSH2_PKTCTX_DHGROUP 0x0001
108 #define SSH2_PKTCTX_DHGEX 0x0002
109 #define SSH2_PKTCTX_KEX_MASK 0x000F
110 #define SSH2_PKTCTX_PUBLICKEY 0x0010
111 #define SSH2_PKTCTX_PASSWORD 0x0020
112 #define SSH2_PKTCTX_KBDINTER 0x0040
113 #define SSH2_PKTCTX_AUTH_MASK 0x00F0
115 #define SSH2_DISCONNECT_HOST_NOT_ALLOWED_TO_CONNECT 1 /* 0x1 */
116 #define SSH2_DISCONNECT_PROTOCOL_ERROR 2 /* 0x2 */
117 #define SSH2_DISCONNECT_KEY_EXCHANGE_FAILED 3 /* 0x3 */
118 #define SSH2_DISCONNECT_HOST_AUTHENTICATION_FAILED 4 /* 0x4 */
119 #define SSH2_DISCONNECT_MAC_ERROR 5 /* 0x5 */
120 #define SSH2_DISCONNECT_COMPRESSION_ERROR 6 /* 0x6 */
121 #define SSH2_DISCONNECT_SERVICE_NOT_AVAILABLE 7 /* 0x7 */
122 #define SSH2_DISCONNECT_PROTOCOL_VERSION_NOT_SUPPORTED 8 /* 0x8 */
123 #define SSH2_DISCONNECT_HOST_KEY_NOT_VERIFIABLE 9 /* 0x9 */
124 #define SSH2_DISCONNECT_CONNECTION_LOST 10 /* 0xa */
125 #define SSH2_DISCONNECT_BY_APPLICATION 11 /* 0xb */
126 #define SSH2_DISCONNECT_TOO_MANY_CONNECTIONS 12 /* 0xc */
127 #define SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER 13 /* 0xd */
128 #define SSH2_DISCONNECT_NO_MORE_AUTH_METHODS_AVAILABLE 14 /* 0xe */
129 #define SSH2_DISCONNECT_ILLEGAL_USER_NAME 15 /* 0xf */
131 static const char *const ssh2_disconnect_reasons[] = {
133 "SSH_DISCONNECT_HOST_NOT_ALLOWED_TO_CONNECT",
134 "SSH_DISCONNECT_PROTOCOL_ERROR",
135 "SSH_DISCONNECT_KEY_EXCHANGE_FAILED",
136 "SSH_DISCONNECT_HOST_AUTHENTICATION_FAILED",
137 "SSH_DISCONNECT_MAC_ERROR",
138 "SSH_DISCONNECT_COMPRESSION_ERROR",
139 "SSH_DISCONNECT_SERVICE_NOT_AVAILABLE",
140 "SSH_DISCONNECT_PROTOCOL_VERSION_NOT_SUPPORTED",
141 "SSH_DISCONNECT_HOST_KEY_NOT_VERIFIABLE",
142 "SSH_DISCONNECT_CONNECTION_LOST",
143 "SSH_DISCONNECT_BY_APPLICATION",
144 "SSH_DISCONNECT_TOO_MANY_CONNECTIONS",
145 "SSH_DISCONNECT_AUTH_CANCELLED_BY_USER",
146 "SSH_DISCONNECT_NO_MORE_AUTH_METHODS_AVAILABLE",
147 "SSH_DISCONNECT_ILLEGAL_USER_NAME",
150 #define SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED 1 /* 0x1 */
151 #define SSH2_OPEN_CONNECT_FAILED 2 /* 0x2 */
152 #define SSH2_OPEN_UNKNOWN_CHANNEL_TYPE 3 /* 0x3 */
153 #define SSH2_OPEN_RESOURCE_SHORTAGE 4 /* 0x4 */
155 #define SSH2_EXTENDED_DATA_STDERR 1 /* 0x1 */
158 * Various remote-bug flags.
160 #define BUG_CHOKES_ON_SSH1_IGNORE 1
161 #define BUG_SSH2_HMAC 2
162 #define BUG_NEEDS_SSH1_PLAIN_PASSWORD 4
163 #define BUG_CHOKES_ON_RSA 8
164 #define BUG_SSH2_RSA_PADDING 16
165 #define BUG_SSH2_DERIVEKEY 32
166 #define BUG_SSH2_REKEY 64
167 #define BUG_SSH2_PK_SESSIONID 128
169 #define translate(x) if (type == x) return #x
170 #define translatec(x,ctx) if (type == x && (pkt_ctx & ctx)) return #x
171 static char *ssh1_pkt_type(int type)
173 translate(SSH1_MSG_DISCONNECT);
174 translate(SSH1_SMSG_PUBLIC_KEY);
175 translate(SSH1_CMSG_SESSION_KEY);
176 translate(SSH1_CMSG_USER);
177 translate(SSH1_CMSG_AUTH_RSA);
178 translate(SSH1_SMSG_AUTH_RSA_CHALLENGE);
179 translate(SSH1_CMSG_AUTH_RSA_RESPONSE);
180 translate(SSH1_CMSG_AUTH_PASSWORD);
181 translate(SSH1_CMSG_REQUEST_PTY);
182 translate(SSH1_CMSG_WINDOW_SIZE);
183 translate(SSH1_CMSG_EXEC_SHELL);
184 translate(SSH1_CMSG_EXEC_CMD);
185 translate(SSH1_SMSG_SUCCESS);
186 translate(SSH1_SMSG_FAILURE);
187 translate(SSH1_CMSG_STDIN_DATA);
188 translate(SSH1_SMSG_STDOUT_DATA);
189 translate(SSH1_SMSG_STDERR_DATA);
190 translate(SSH1_CMSG_EOF);
191 translate(SSH1_SMSG_EXIT_STATUS);
192 translate(SSH1_MSG_CHANNEL_OPEN_CONFIRMATION);
193 translate(SSH1_MSG_CHANNEL_OPEN_FAILURE);
194 translate(SSH1_MSG_CHANNEL_DATA);
195 translate(SSH1_MSG_CHANNEL_CLOSE);
196 translate(SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION);
197 translate(SSH1_SMSG_X11_OPEN);
198 translate(SSH1_CMSG_PORT_FORWARD_REQUEST);
199 translate(SSH1_MSG_PORT_OPEN);
200 translate(SSH1_CMSG_AGENT_REQUEST_FORWARDING);
201 translate(SSH1_SMSG_AGENT_OPEN);
202 translate(SSH1_MSG_IGNORE);
203 translate(SSH1_CMSG_EXIT_CONFIRMATION);
204 translate(SSH1_CMSG_X11_REQUEST_FORWARDING);
205 translate(SSH1_CMSG_AUTH_RHOSTS_RSA);
206 translate(SSH1_MSG_DEBUG);
207 translate(SSH1_CMSG_REQUEST_COMPRESSION);
208 translate(SSH1_CMSG_AUTH_TIS);
209 translate(SSH1_SMSG_AUTH_TIS_CHALLENGE);
210 translate(SSH1_CMSG_AUTH_TIS_RESPONSE);
211 translate(SSH1_CMSG_AUTH_CCARD);
212 translate(SSH1_SMSG_AUTH_CCARD_CHALLENGE);
213 translate(SSH1_CMSG_AUTH_CCARD_RESPONSE);
216 static char *ssh2_pkt_type(int pkt_ctx, int type)
218 translate(SSH2_MSG_DISCONNECT);
219 translate(SSH2_MSG_IGNORE);
220 translate(SSH2_MSG_UNIMPLEMENTED);
221 translate(SSH2_MSG_DEBUG);
222 translate(SSH2_MSG_SERVICE_REQUEST);
223 translate(SSH2_MSG_SERVICE_ACCEPT);
224 translate(SSH2_MSG_KEXINIT);
225 translate(SSH2_MSG_NEWKEYS);
226 translatec(SSH2_MSG_KEXDH_INIT, SSH2_PKTCTX_DHGROUP);
227 translatec(SSH2_MSG_KEXDH_REPLY, SSH2_PKTCTX_DHGROUP);
228 translatec(SSH2_MSG_KEX_DH_GEX_REQUEST, SSH2_PKTCTX_DHGEX);
229 translatec(SSH2_MSG_KEX_DH_GEX_GROUP, SSH2_PKTCTX_DHGEX);
230 translatec(SSH2_MSG_KEX_DH_GEX_INIT, SSH2_PKTCTX_DHGEX);
231 translatec(SSH2_MSG_KEX_DH_GEX_REPLY, SSH2_PKTCTX_DHGEX);
232 translate(SSH2_MSG_USERAUTH_REQUEST);
233 translate(SSH2_MSG_USERAUTH_FAILURE);
234 translate(SSH2_MSG_USERAUTH_SUCCESS);
235 translate(SSH2_MSG_USERAUTH_BANNER);
236 translatec(SSH2_MSG_USERAUTH_PK_OK, SSH2_PKTCTX_PUBLICKEY);
237 translatec(SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ, SSH2_PKTCTX_PASSWORD);
238 translatec(SSH2_MSG_USERAUTH_INFO_REQUEST, SSH2_PKTCTX_KBDINTER);
239 translatec(SSH2_MSG_USERAUTH_INFO_RESPONSE, SSH2_PKTCTX_KBDINTER);
240 translate(SSH2_MSG_GLOBAL_REQUEST);
241 translate(SSH2_MSG_REQUEST_SUCCESS);
242 translate(SSH2_MSG_REQUEST_FAILURE);
243 translate(SSH2_MSG_CHANNEL_OPEN);
244 translate(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION);
245 translate(SSH2_MSG_CHANNEL_OPEN_FAILURE);
246 translate(SSH2_MSG_CHANNEL_WINDOW_ADJUST);
247 translate(SSH2_MSG_CHANNEL_DATA);
248 translate(SSH2_MSG_CHANNEL_EXTENDED_DATA);
249 translate(SSH2_MSG_CHANNEL_EOF);
250 translate(SSH2_MSG_CHANNEL_CLOSE);
251 translate(SSH2_MSG_CHANNEL_REQUEST);
252 translate(SSH2_MSG_CHANNEL_SUCCESS);
253 translate(SSH2_MSG_CHANNEL_FAILURE);
259 #define GET_32BIT(cp) \
260 (((unsigned long)(unsigned char)(cp)[0] << 24) | \
261 ((unsigned long)(unsigned char)(cp)[1] << 16) | \
262 ((unsigned long)(unsigned char)(cp)[2] << 8) | \
263 ((unsigned long)(unsigned char)(cp)[3]))
265 #define PUT_32BIT(cp, value) { \
266 (cp)[0] = (unsigned char)((value) >> 24); \
267 (cp)[1] = (unsigned char)((value) >> 16); \
268 (cp)[2] = (unsigned char)((value) >> 8); \
269 (cp)[3] = (unsigned char)(value); }
271 /* Enumeration values for fields in SSH-1 packets */
273 PKT_END, PKT_INT, PKT_CHAR, PKT_DATA, PKT_STR, PKT_BIGNUM,
274 /* These values are for communicating relevant semantics of
275 * fields to the packet logging code. */
276 PKTT_OTHER, PKTT_PASSWORD, PKTT_DATA
280 * Coroutine mechanics for the sillier bits of the code. If these
281 * macros look impenetrable to you, you might find it helpful to
284 * http://www.chiark.greenend.org.uk/~sgtatham/coroutines.html
286 * which explains the theory behind these macros.
288 * In particular, if you are getting `case expression not constant'
289 * errors when building with MS Visual Studio, this is because MS's
290 * Edit and Continue debugging feature causes their compiler to
291 * violate ANSI C. To disable Edit and Continue debugging:
293 * - right-click ssh.c in the FileView
295 * - select the C/C++ tab and the General category
296 * - under `Debug info:', select anything _other_ than `Program
297 * Database for Edit and Continue'.
299 #define crBegin(v) { int *crLine = &v; switch(v) { case 0:;
302 if (!ssh->t) ssh->t = snew(struct t); \
304 #define crFinish(z) } *crLine = 0; return (z); }
305 #define crFinishV } *crLine = 0; return; }
306 #define crReturn(z) \
308 *crLine =__LINE__; return (z); case __LINE__:;\
312 *crLine=__LINE__; return; case __LINE__:;\
314 #define crStop(z) do{ *crLine = 0; return (z); }while(0)
315 #define crStopV do{ *crLine = 0; return; }while(0)
316 #define crWaitUntil(c) do { crReturn(0); } while (!(c))
317 #define crWaitUntilV(c) do { crReturnV; } while (!(c))
319 typedef struct ssh_tag *Ssh;
322 static struct Packet *ssh2_pkt_init(int pkt_type);
323 static void ssh2_pkt_addbool(struct Packet *, unsigned char value);
324 static void ssh2_pkt_adduint32(struct Packet *, unsigned long value);
325 static void ssh2_pkt_addstring_start(struct Packet *);
326 static void ssh2_pkt_addstring_str(struct Packet *, char *data);
327 static void ssh2_pkt_addstring_data(struct Packet *, char *data, int len);
328 static void ssh2_pkt_addstring(struct Packet *, char *data);
329 static unsigned char *ssh2_mpint_fmt(Bignum b, int *len);
330 static void ssh2_pkt_addmp(struct Packet *, Bignum b);
331 static int ssh2_pkt_construct(Ssh, struct Packet *);
332 static void ssh2_pkt_send(Ssh, struct Packet *);
333 static void ssh2_pkt_send_noqueue(Ssh, struct Packet *);
334 static int do_ssh1_login(Ssh ssh, unsigned char *in, int inlen,
335 struct Packet *pktin);
336 static void do_ssh2_authconn(Ssh ssh, unsigned char *in, int inlen,
337 struct Packet *pktin);
340 * Buffer management constants. There are several of these for
341 * various different purposes:
343 * - SSH1_BUFFER_LIMIT is the amount of backlog that must build up
344 * on a local data stream before we throttle the whole SSH
345 * connection (in SSH-1 only). Throttling the whole connection is
346 * pretty drastic so we set this high in the hope it won't
349 * - SSH_MAX_BACKLOG is the amount of backlog that must build up
350 * on the SSH connection itself before we defensively throttle
351 * _all_ local data streams. This is pretty drastic too (though
352 * thankfully unlikely in SSH-2 since the window mechanism should
353 * ensure that the server never has any need to throttle its end
354 * of the connection), so we set this high as well.
356 * - OUR_V2_WINSIZE is the maximum window size we present on SSH-2
360 #define SSH1_BUFFER_LIMIT 32768
361 #define SSH_MAX_BACKLOG 32768
362 #define OUR_V2_WINSIZE 16384
363 #define OUR_V2_MAXPKT 0x4000UL
365 const static struct ssh_signkey *hostkey_algs[] = { &ssh_rsa, &ssh_dss };
367 static void *nullmac_make_context(void)
371 static void nullmac_free_context(void *handle)
374 static void nullmac_key(void *handle, unsigned char *key)
377 static void nullmac_generate(void *handle, unsigned char *blk, int len,
381 static int nullmac_verify(void *handle, unsigned char *blk, int len,
386 const static struct ssh_mac ssh_mac_none = {
387 nullmac_make_context, nullmac_free_context, nullmac_key,
388 nullmac_generate, nullmac_verify, "none", 0
390 const static struct ssh_mac *macs[] = {
391 &ssh_sha1, &ssh_md5, &ssh_mac_none
393 const static struct ssh_mac *buggymacs[] = {
394 &ssh_sha1_buggy, &ssh_md5, &ssh_mac_none
397 static void *ssh_comp_none_init(void)
401 static void ssh_comp_none_cleanup(void *handle)
404 static int ssh_comp_none_block(void *handle, unsigned char *block, int len,
405 unsigned char **outblock, int *outlen)
409 static int ssh_comp_none_disable(void *handle)
413 const static struct ssh_compress ssh_comp_none = {
415 ssh_comp_none_init, ssh_comp_none_cleanup, ssh_comp_none_block,
416 ssh_comp_none_init, ssh_comp_none_cleanup, ssh_comp_none_block,
417 ssh_comp_none_disable, NULL
419 extern const struct ssh_compress ssh_zlib;
420 const static struct ssh_compress *compressions[] = {
421 &ssh_zlib, &ssh_comp_none
424 enum { /* channel types */
429 CHAN_SOCKDATA_DORMANT /* one the remote hasn't confirmed */
433 * 2-3-4 tree storing channels.
436 Ssh ssh; /* pointer back to main context */
437 unsigned remoteid, localid;
439 /* True if we opened this channel but server hasn't confirmed. */
442 * In SSH-1, this value contains four bits:
444 * 1 We have sent SSH1_MSG_CHANNEL_CLOSE.
445 * 2 We have sent SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION.
446 * 4 We have received SSH1_MSG_CHANNEL_CLOSE.
447 * 8 We have received SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION.
449 * A channel is completely finished with when all four bits are set.
453 struct ssh1_data_channel {
456 struct ssh2_data_channel {
458 unsigned remwindow, remmaxpkt;
463 struct ssh_agent_channel {
464 unsigned char *message;
465 unsigned char msglen[4];
466 unsigned lensofar, totallen;
468 struct ssh_x11_channel {
471 struct ssh_pfd_channel {
478 * 2-3-4 tree storing remote->local port forwardings. SSH-1 and SSH-2
479 * use this structure in different ways, reflecting SSH-2's
480 * altogether saner approach to port forwarding.
482 * In SSH-1, you arrange a remote forwarding by sending the server
483 * the remote port number, and the local destination host:port.
484 * When a connection comes in, the server sends you back that
485 * host:port pair, and you connect to it. This is a ready-made
486 * security hole if you're not on the ball: a malicious server
487 * could send you back _any_ host:port pair, so if you trustingly
488 * connect to the address it gives you then you've just opened the
489 * entire inside of your corporate network just by connecting
490 * through it to a dodgy SSH server. Hence, we must store a list of
491 * host:port pairs we _are_ trying to forward to, and reject a
492 * connection request from the server if it's not in the list.
494 * In SSH-2, each side of the connection minds its own business and
495 * doesn't send unnecessary information to the other. You arrange a
496 * remote forwarding by sending the server just the remote port
497 * number. When a connection comes in, the server tells you which
498 * of its ports was connected to; and _you_ have to remember what
499 * local host:port pair went with that port number.
501 * Hence, in SSH-1 this structure is indexed by destination
502 * host:port pair, whereas in SSH-2 it is indexed by source port.
504 struct ssh_portfwd; /* forward declaration */
506 struct ssh_rportfwd {
507 unsigned sport, dport;
510 struct ssh_portfwd *pfrec;
512 #define free_rportfwd(pf) ( \
513 ((pf) ? (sfree((pf)->sportdesc)) : (void)0 ), sfree(pf) )
516 * Separately to the rportfwd tree (which is for looking up port
517 * open requests from the server), a tree of _these_ structures is
518 * used to keep track of all the currently open port forwardings,
519 * so that we can reconfigure in mid-session if the user requests
523 enum { DESTROY, KEEP, CREATE } status;
525 unsigned sport, dport;
528 struct ssh_rportfwd *remote;
532 #define free_portfwd(pf) ( \
533 ((pf) ? (sfree((pf)->saddr), sfree((pf)->daddr), \
534 sfree((pf)->sserv), sfree((pf)->dserv)) : (void)0 ), sfree(pf) )
538 long forcepad; /* Force padding to at least this length */
540 unsigned long sequence;
545 long encrypted_len; /* for SSH-2 total-size counting */
548 * State associated with packet logging
552 struct logblank_t *blanks;
555 static void ssh1_protocol(Ssh ssh, void *vin, int inlen,
556 struct Packet *pktin);
557 static void ssh2_protocol(Ssh ssh, void *vin, int inlen,
558 struct Packet *pktin);
559 static void ssh1_protocol_setup(Ssh ssh);
560 static void ssh2_protocol_setup(Ssh ssh);
561 static void ssh_size(void *handle, int width, int height);
562 static void ssh_special(void *handle, Telnet_Special);
563 static int ssh2_try_send(struct ssh_channel *c);
564 static void ssh2_add_channel_data(struct ssh_channel *c, char *buf, int len);
565 static void ssh_throttle_all(Ssh ssh, int enable, int bufsize);
566 static void ssh2_set_window(struct ssh_channel *c, unsigned newwin);
567 static int ssh_sendbuffer(void *handle);
568 static int ssh_do_close(Ssh ssh, int notify_exit);
569 static unsigned long ssh_pkt_getuint32(struct Packet *pkt);
570 static int ssh2_pkt_getbool(struct Packet *pkt);
571 static void ssh_pkt_getstring(struct Packet *pkt, char **p, int *length);
572 static void ssh2_timer(void *ctx, long now);
573 static int do_ssh2_transport(Ssh ssh, void *vin, int inlen,
574 struct Packet *pktin);
576 struct rdpkt1_state_tag {
577 long len, pad, biglen, to_read;
578 unsigned long realcrc, gotcrc;
582 struct Packet *pktin;
585 struct rdpkt2_state_tag {
586 long len, pad, payload, packetlen, maclen;
589 unsigned long incoming_sequence;
590 struct Packet *pktin;
593 typedef void (*handler_fn_t)(Ssh ssh, struct Packet *pktin);
594 typedef void (*chandler_fn_t)(Ssh ssh, struct Packet *pktin, void *ctx);
596 struct queued_handler;
597 struct queued_handler {
599 chandler_fn_t handler;
601 struct queued_handler *next;
605 const struct plug_function_table *fn;
606 /* the above field _must_ be first in the structure */
608 SHA_State exhash, exhashbase;
615 unsigned char session_key[32];
617 int v1_remote_protoflags;
618 int v1_local_protoflags;
619 int agentfwd_enabled;
622 const struct ssh_cipher *cipher;
625 const struct ssh2_cipher *cscipher, *sccipher;
626 void *cs_cipher_ctx, *sc_cipher_ctx;
627 const struct ssh_mac *csmac, *scmac;
628 void *cs_mac_ctx, *sc_mac_ctx;
629 const struct ssh_compress *cscomp, *sccomp;
630 void *cs_comp_ctx, *sc_comp_ctx;
631 const struct ssh_kex *kex;
632 const struct ssh_signkey *hostkey;
633 unsigned char v2_session_id[20];
639 int echoing, editing;
643 int ospeed, ispeed; /* temporaries */
644 int term_width, term_height;
646 tree234 *channels; /* indexed by local id */
647 struct ssh_channel *mainchan; /* primary session channel */
651 tree234 *rportfwds, *portfwds;
655 SSH_STATE_BEFORE_SIZE,
661 int size_needed, eof_needed;
663 struct Packet **queue;
664 int queuelen, queuesize;
666 unsigned char *deferred_send_data;
667 int deferred_len, deferred_size;
670 * Gross hack: pscp will try to start SFTP but fall back to
671 * scp1 if that fails. This variable is the means by which
672 * scp.c can reach into the SSH code and find out which one it
678 * Used for username and password input.
680 char *userpass_input_buffer;
681 int userpass_input_buflen;
682 int userpass_input_bufpos;
683 int userpass_input_echo;
690 int v1_throttle_count;
693 int v1_stdout_throttling;
694 unsigned long v2_outgoing_sequence;
696 int ssh1_rdpkt_crstate;
697 int ssh2_rdpkt_crstate;
698 int do_ssh_init_crstate;
699 int ssh_gotdata_crstate;
700 int do_ssh1_login_crstate;
701 int do_ssh1_connection_crstate;
702 int do_ssh2_transport_crstate;
703 int do_ssh2_authconn_crstate;
705 void *do_ssh_init_state;
706 void *do_ssh1_login_state;
707 void *do_ssh2_transport_state;
708 void *do_ssh2_authconn_state;
710 struct rdpkt1_state_tag rdpkt1_state;
711 struct rdpkt2_state_tag rdpkt2_state;
713 /* SSH-1 and SSH-2 use this for different things, but both use it */
714 int protocol_initial_phase_done;
716 void (*protocol) (Ssh ssh, void *vin, int inlen,
718 struct Packet *(*s_rdpkt) (Ssh ssh, unsigned char **data, int *datalen);
721 * We maintain a full _copy_ of a Config structure here, not
722 * merely a pointer to it. That way, when we're passed a new
723 * one for reconfiguration, we can check the differences and
724 * potentially reconfigure port forwardings etc in mid-session.
729 * Used to transfer data back from async callbacks.
731 void *agent_response;
732 int agent_response_len;
736 * The SSH connection can be set as `frozen', meaning we are
737 * not currently accepting incoming data from the network. This
738 * is slightly more serious than setting the _socket_ as
739 * frozen, because we may already have had data passed to us
740 * from the network which we need to delay processing until
741 * after the freeze is lifted, so we also need a bufchain to
745 bufchain queued_incoming_data;
748 * Dispatch table for packet types that we may have to deal
751 handler_fn_t packet_dispatch[256];
754 * Queues of one-off handler functions for success/failure
755 * indications from a request.
757 struct queued_handler *qhead, *qtail;
760 * This module deals with sending keepalives.
765 * Track incoming and outgoing data sizes and time, for
768 unsigned long incoming_data_size, outgoing_data_size, deferred_data_size;
769 unsigned long max_data_size;
771 long next_rekey, last_rekey;
772 char *deferred_rekey_reason; /* points to STATIC string; don't free */
775 #define logevent(s) logevent(ssh->frontend, s)
777 /* logevent, only printf-formatted. */
778 static void logeventf(Ssh ssh, const char *fmt, ...)
784 buf = dupvprintf(fmt, ap);
790 #define bombout(msg) \
792 char *text = dupprintf msg; \
793 ssh_do_close(ssh, FALSE); \
795 connection_fatal(ssh->frontend, "%s", text); \
799 /* Functions to leave bits out of the SSH packet log file. */
801 static void dont_log_password(Ssh ssh, struct Packet *pkt, int blanktype)
803 if (ssh->cfg.logomitpass)
804 pkt->logmode = blanktype;
807 static void dont_log_data(Ssh ssh, struct Packet *pkt, int blanktype)
809 if (ssh->cfg.logomitdata)
810 pkt->logmode = blanktype;
813 static void end_log_omission(Ssh ssh, struct Packet *pkt)
815 pkt->logmode = PKTLOG_EMIT;
818 static int ssh_channelcmp(void *av, void *bv)
820 struct ssh_channel *a = (struct ssh_channel *) av;
821 struct ssh_channel *b = (struct ssh_channel *) bv;
822 if (a->localid < b->localid)
824 if (a->localid > b->localid)
828 static int ssh_channelfind(void *av, void *bv)
830 unsigned *a = (unsigned *) av;
831 struct ssh_channel *b = (struct ssh_channel *) bv;
839 static int ssh_rportcmp_ssh1(void *av, void *bv)
841 struct ssh_rportfwd *a = (struct ssh_rportfwd *) av;
842 struct ssh_rportfwd *b = (struct ssh_rportfwd *) bv;
844 if ( (i = strcmp(a->dhost, b->dhost)) != 0)
845 return i < 0 ? -1 : +1;
846 if (a->dport > b->dport)
848 if (a->dport < b->dport)
853 static int ssh_rportcmp_ssh2(void *av, void *bv)
855 struct ssh_rportfwd *a = (struct ssh_rportfwd *) av;
856 struct ssh_rportfwd *b = (struct ssh_rportfwd *) bv;
858 if (a->sport > b->sport)
860 if (a->sport < b->sport)
866 * Special form of strcmp which can cope with NULL inputs. NULL is
867 * defined to sort before even the empty string.
869 static int nullstrcmp(const char *a, const char *b)
871 if (a == NULL && b == NULL)
880 static int ssh_portcmp(void *av, void *bv)
882 struct ssh_portfwd *a = (struct ssh_portfwd *) av;
883 struct ssh_portfwd *b = (struct ssh_portfwd *) bv;
885 if (a->type > b->type)
887 if (a->type < b->type)
889 if (a->addressfamily > b->addressfamily)
891 if (a->addressfamily < b->addressfamily)
893 if ( (i = nullstrcmp(a->saddr, b->saddr)) != 0)
894 return i < 0 ? -1 : +1;
895 if (a->sport > b->sport)
897 if (a->sport < b->sport)
899 if (a->type != 'D') {
900 if ( (i = nullstrcmp(a->daddr, b->daddr)) != 0)
901 return i < 0 ? -1 : +1;
902 if (a->dport > b->dport)
904 if (a->dport < b->dport)
910 static int alloc_channel_id(Ssh ssh)
912 const unsigned CHANNEL_NUMBER_OFFSET = 256;
913 unsigned low, high, mid;
915 struct ssh_channel *c;
918 * First-fit allocation of channel numbers: always pick the
919 * lowest unused one. To do this, binary-search using the
920 * counted B-tree to find the largest channel ID which is in a
921 * contiguous sequence from the beginning. (Precisely
922 * everything in that sequence must have ID equal to its tree
923 * index plus CHANNEL_NUMBER_OFFSET.)
925 tsize = count234(ssh->channels);
929 while (high - low > 1) {
930 mid = (high + low) / 2;
931 c = index234(ssh->channels, mid);
932 if (c->localid == mid + CHANNEL_NUMBER_OFFSET)
933 low = mid; /* this one is fine */
935 high = mid; /* this one is past it */
938 * Now low points to either -1, or the tree index of the
939 * largest ID in the initial sequence.
942 unsigned i = low + 1 + CHANNEL_NUMBER_OFFSET;
943 assert(NULL == find234(ssh->channels, &i, ssh_channelfind));
945 return low + 1 + CHANNEL_NUMBER_OFFSET;
948 static void c_write(Ssh ssh, const char *buf, int len)
950 if ((flags & FLAG_STDERR)) {
952 for (i = 0; i < len; i++)
954 fputc(buf[i], stderr);
957 from_backend(ssh->frontend, 1, buf, len);
960 static void c_write_untrusted(Ssh ssh, const char *buf, int len)
963 for (i = 0; i < len; i++) {
965 c_write(ssh, "\r\n", 2);
966 else if ((buf[i] & 0x60) || (buf[i] == '\r'))
967 c_write(ssh, buf + i, 1);
971 static void c_write_str(Ssh ssh, const char *buf)
973 c_write(ssh, buf, strlen(buf));
976 static void ssh_free_packet(struct Packet *pkt)
981 static struct Packet *ssh_new_packet(void)
983 struct Packet *pkt = snew(struct Packet);
987 pkt->logmode = PKTLOG_EMIT;
995 * Collect incoming data in the incoming packet buffer.
996 * Decipher and verify the packet when it is completely read.
997 * Drop SSH1_MSG_DEBUG and SSH1_MSG_IGNORE packets.
998 * Update the *data and *datalen variables.
999 * Return a Packet structure when a packet is completed.
1001 static struct Packet *ssh1_rdpkt(Ssh ssh, unsigned char **data, int *datalen)
1003 struct rdpkt1_state_tag *st = &ssh->rdpkt1_state;
1005 crBegin(ssh->ssh1_rdpkt_crstate);
1007 st->pktin = ssh_new_packet();
1009 st->pktin->type = 0;
1010 st->pktin->length = 0;
1012 for (st->i = st->len = 0; st->i < 4; st->i++) {
1013 while ((*datalen) == 0)
1015 st->len = (st->len << 8) + **data;
1016 (*data)++, (*datalen)--;
1019 st->pad = 8 - (st->len % 8);
1020 st->biglen = st->len + st->pad;
1021 st->pktin->length = st->len - 5;
1023 if (st->biglen < 0) {
1024 bombout(("Extremely large packet length from server suggests"
1025 " data stream corruption"));
1026 ssh_free_packet(st->pktin);
1030 st->pktin->maxlen = st->biglen;
1031 st->pktin->data = snewn(st->biglen + APIEXTRA, unsigned char);
1033 st->to_read = st->biglen;
1034 st->p = st->pktin->data;
1035 while (st->to_read > 0) {
1036 st->chunk = st->to_read;
1037 while ((*datalen) == 0)
1039 if (st->chunk > (*datalen))
1040 st->chunk = (*datalen);
1041 memcpy(st->p, *data, st->chunk);
1043 *datalen -= st->chunk;
1045 st->to_read -= st->chunk;
1048 if (ssh->cipher && detect_attack(ssh->crcda_ctx, st->pktin->data,
1049 st->biglen, NULL)) {
1050 bombout(("Network attack (CRC compensation) detected!"));
1051 ssh_free_packet(st->pktin);
1056 ssh->cipher->decrypt(ssh->v1_cipher_ctx, st->pktin->data, st->biglen);
1058 st->realcrc = crc32_compute(st->pktin->data, st->biglen - 4);
1059 st->gotcrc = GET_32BIT(st->pktin->data + st->biglen - 4);
1060 if (st->gotcrc != st->realcrc) {
1061 bombout(("Incorrect CRC received on packet"));
1062 ssh_free_packet(st->pktin);
1066 st->pktin->body = st->pktin->data + st->pad + 1;
1067 st->pktin->savedpos = 0;
1069 if (ssh->v1_compressing) {
1070 unsigned char *decompblk;
1072 if (!zlib_decompress_block(ssh->sc_comp_ctx,
1073 st->pktin->body - 1, st->pktin->length + 1,
1074 &decompblk, &decomplen)) {
1075 bombout(("Zlib decompression encountered invalid data"));
1076 ssh_free_packet(st->pktin);
1080 if (st->pktin->maxlen < st->pad + decomplen) {
1081 st->pktin->maxlen = st->pad + decomplen;
1082 st->pktin->data = sresize(st->pktin->data,
1083 st->pktin->maxlen + APIEXTRA,
1085 st->pktin->body = st->pktin->data + st->pad + 1;
1088 memcpy(st->pktin->body - 1, decompblk, decomplen);
1090 st->pktin->length = decomplen - 1;
1093 st->pktin->type = st->pktin->body[-1];
1096 * Log incoming packet, possibly omitting sensitive fields.
1100 struct logblank_t blank;
1101 if (ssh->cfg.logomitdata) {
1102 int do_blank = FALSE, blank_prefix = 0;
1103 /* "Session data" packets - omit the data field */
1104 if ((st->pktin->type == SSH1_SMSG_STDOUT_DATA) ||
1105 (st->pktin->type == SSH1_SMSG_STDERR_DATA)) {
1106 do_blank = TRUE; blank_prefix = 0;
1107 } else if (st->pktin->type == SSH1_MSG_CHANNEL_DATA) {
1108 do_blank = TRUE; blank_prefix = 4;
1111 blank.offset = blank_prefix;
1112 blank.len = st->pktin->length;
1113 blank.type = PKTLOG_OMIT;
1117 log_packet(ssh->logctx,
1118 PKT_INCOMING, st->pktin->type,
1119 ssh1_pkt_type(st->pktin->type),
1120 st->pktin->body, st->pktin->length,
1124 crFinish(st->pktin);
1127 static struct Packet *ssh2_rdpkt(Ssh ssh, unsigned char **data, int *datalen)
1129 struct rdpkt2_state_tag *st = &ssh->rdpkt2_state;
1131 crBegin(ssh->ssh2_rdpkt_crstate);
1133 st->pktin = ssh_new_packet();
1135 st->pktin->type = 0;
1136 st->pktin->length = 0;
1138 st->cipherblk = ssh->sccipher->blksize;
1141 if (st->cipherblk < 8)
1144 st->pktin->data = snewn(st->cipherblk + APIEXTRA, unsigned char);
1147 * Acquire and decrypt the first block of the packet. This will
1148 * contain the length and padding details.
1150 for (st->i = st->len = 0; st->i < st->cipherblk; st->i++) {
1151 while ((*datalen) == 0)
1153 st->pktin->data[st->i] = *(*data)++;
1158 ssh->sccipher->decrypt(ssh->sc_cipher_ctx,
1159 st->pktin->data, st->cipherblk);
1162 * Now get the length and padding figures.
1164 st->len = GET_32BIT(st->pktin->data);
1165 st->pad = st->pktin->data[4];
1168 * _Completely_ silly lengths should be stomped on before they
1169 * do us any more damage.
1171 if (st->len < 0 || st->pad < 0 || st->len + st->pad < 0) {
1172 bombout(("Incoming packet was garbled on decryption"));
1173 ssh_free_packet(st->pktin);
1178 * This enables us to deduce the payload length.
1180 st->payload = st->len - st->pad - 1;
1182 st->pktin->length = st->payload + 5;
1185 * So now we can work out the total packet length.
1187 st->packetlen = st->len + 4;
1188 st->maclen = ssh->scmac ? ssh->scmac->len : 0;
1191 * Allocate memory for the rest of the packet.
1193 st->pktin->maxlen = st->packetlen + st->maclen;
1194 st->pktin->data = sresize(st->pktin->data,
1195 st->pktin->maxlen + APIEXTRA,
1199 * Read and decrypt the remainder of the packet.
1201 for (st->i = st->cipherblk; st->i < st->packetlen + st->maclen;
1203 while ((*datalen) == 0)
1205 st->pktin->data[st->i] = *(*data)++;
1208 /* Decrypt everything _except_ the MAC. */
1210 ssh->sccipher->decrypt(ssh->sc_cipher_ctx,
1211 st->pktin->data + st->cipherblk,
1212 st->packetlen - st->cipherblk);
1214 st->pktin->encrypted_len = st->packetlen;
1220 && !ssh->scmac->verify(ssh->sc_mac_ctx, st->pktin->data, st->len + 4,
1221 st->incoming_sequence)) {
1222 bombout(("Incorrect MAC received on packet"));
1223 ssh_free_packet(st->pktin);
1227 st->pktin->sequence = st->incoming_sequence++;
1230 * Decompress packet payload.
1233 unsigned char *newpayload;
1236 ssh->sccomp->decompress(ssh->sc_comp_ctx,
1237 st->pktin->data + 5, st->pktin->length - 5,
1238 &newpayload, &newlen)) {
1239 if (st->pktin->maxlen < newlen + 5) {
1240 st->pktin->maxlen = newlen + 5;
1241 st->pktin->data = sresize(st->pktin->data,
1242 st->pktin->maxlen + APIEXTRA,
1245 st->pktin->length = 5 + newlen;
1246 memcpy(st->pktin->data + 5, newpayload, newlen);
1251 st->pktin->savedpos = 6;
1252 st->pktin->body = st->pktin->data;
1253 st->pktin->type = st->pktin->data[5];
1256 * Log incoming packet, possibly omitting sensitive fields.
1260 struct logblank_t blank;
1261 if (ssh->cfg.logomitdata) {
1262 int do_blank = FALSE, blank_prefix = 0;
1263 /* "Session data" packets - omit the data field */
1264 if (st->pktin->type == SSH2_MSG_CHANNEL_DATA) {
1265 do_blank = TRUE; blank_prefix = 4;
1266 } else if (st->pktin->type == SSH2_MSG_CHANNEL_EXTENDED_DATA) {
1267 do_blank = TRUE; blank_prefix = 8;
1270 blank.offset = blank_prefix;
1271 blank.len = (st->pktin->length-6) - blank_prefix;
1272 blank.type = PKTLOG_OMIT;
1276 log_packet(ssh->logctx, PKT_INCOMING, st->pktin->type,
1277 ssh2_pkt_type(ssh->pkt_ctx, st->pktin->type),
1278 st->pktin->data+6, st->pktin->length-6,
1282 crFinish(st->pktin);
1285 static void ssh1_pktout_size(struct Packet *pkt, int len)
1289 len += 5; /* type and CRC */
1290 pad = 8 - (len % 8);
1293 pkt->length = len - 5;
1294 if (pkt->maxlen < biglen) {
1295 pkt->maxlen = biglen;
1296 pkt->data = sresize(pkt->data, biglen + 4 + APIEXTRA, unsigned char);
1298 pkt->body = pkt->data + 4 + pad + 1;
1301 static struct Packet *s_wrpkt_start(int type, int len)
1303 struct Packet *pkt = ssh_new_packet();
1304 ssh1_pktout_size(pkt, len);
1306 /* Initialise log omission state */
1312 static int s_wrpkt_prepare(Ssh ssh, struct Packet *pkt)
1318 * XXX various versions of SC (including 8.8.4) screw up the
1319 * register allocation in this function and use the same register
1320 * (D6) for len and as a temporary, with predictable results. The
1321 * following sledgehammer prevents this.
1327 pkt->body[-1] = pkt->type;
1330 log_packet(ssh->logctx, PKT_OUTGOING, pkt->type,
1331 ssh1_pkt_type(pkt->type),
1332 pkt->body, pkt->length,
1333 pkt->nblanks, pkt->blanks);
1334 sfree(pkt->blanks); pkt->blanks = NULL;
1337 if (ssh->v1_compressing) {
1338 unsigned char *compblk;
1340 zlib_compress_block(ssh->cs_comp_ctx,
1341 pkt->body - 1, pkt->length + 1,
1342 &compblk, &complen);
1343 ssh1_pktout_size(pkt, complen - 1);
1344 memcpy(pkt->body - 1, compblk, complen);
1348 len = pkt->length + 5; /* type and CRC */
1349 pad = 8 - (len % 8);
1352 for (i = 0; i < pad; i++)
1353 pkt->data[i + 4] = random_byte();
1354 crc = crc32_compute(pkt->data + 4, biglen - 4);
1355 PUT_32BIT(pkt->data + biglen, crc);
1356 PUT_32BIT(pkt->data, len);
1359 ssh->cipher->encrypt(ssh->v1_cipher_ctx, pkt->data + 4, biglen);
1364 static void s_wrpkt(Ssh ssh, struct Packet *pkt)
1367 len = s_wrpkt_prepare(ssh, pkt);
1368 backlog = sk_write(ssh->s, (char *)pkt->data, len);
1369 if (backlog > SSH_MAX_BACKLOG)
1370 ssh_throttle_all(ssh, 1, backlog);
1373 static void s_wrpkt_defer(Ssh ssh, struct Packet *pkt)
1376 len = s_wrpkt_prepare(ssh, pkt);
1377 if (ssh->deferred_len + len > ssh->deferred_size) {
1378 ssh->deferred_size = ssh->deferred_len + len + 128;
1379 ssh->deferred_send_data = sresize(ssh->deferred_send_data,
1383 memcpy(ssh->deferred_send_data + ssh->deferred_len, pkt->data, len);
1384 ssh->deferred_len += len;
1388 * Construct a packet with the specified contents.
1390 static struct Packet *construct_packet(Ssh ssh, int pkttype,
1391 va_list ap1, va_list ap2)
1393 unsigned char *p, *argp, argchar;
1394 unsigned long argint;
1395 int pktlen, argtype, arglen;
1400 while ((argtype = va_arg(ap1, int)) != PKT_END) {
1403 (void) va_arg(ap1, int);
1407 (void) va_arg(ap1, int);
1411 (void) va_arg(ap1, unsigned char *);
1412 arglen = va_arg(ap1, int);
1416 argp = va_arg(ap1, unsigned char *);
1417 arglen = strlen((char *)argp);
1418 pktlen += 4 + arglen;
1421 bn = va_arg(ap1, Bignum);
1422 pktlen += ssh1_bignum_length(bn);
1427 /* ignore this pass */
1434 pkt = s_wrpkt_start(pkttype, pktlen);
1437 while ((argtype = va_arg(ap2, int)) != PKT_END) {
1438 int offset = p - pkt->body, len = 0;
1440 /* Actual fields in the packet */
1442 argint = va_arg(ap2, int);
1443 PUT_32BIT(p, argint);
1447 argchar = (unsigned char) va_arg(ap2, int);
1452 argp = va_arg(ap2, unsigned char *);
1453 arglen = va_arg(ap2, int);
1454 memcpy(p, argp, arglen);
1458 argp = va_arg(ap2, unsigned char *);
1459 arglen = strlen((char *)argp);
1460 PUT_32BIT(p, arglen);
1461 memcpy(p + 4, argp, arglen);
1465 bn = va_arg(ap2, Bignum);
1466 len = ssh1_write_bignum(p, bn);
1468 /* Tokens for modifications to packet logging */
1470 dont_log_password(ssh, pkt, PKTLOG_BLANK);
1473 dont_log_data(ssh, pkt, PKTLOG_OMIT);
1476 end_log_omission(ssh, pkt);
1480 /* Deal with logfile omission, if required. */
1481 if (len && (pkt->logmode != PKTLOG_EMIT)) {
1483 pkt->blanks = sresize(pkt->blanks, pkt->nblanks,
1485 pkt->blanks[pkt->nblanks-1].offset = offset;
1486 pkt->blanks[pkt->nblanks-1].len = len;
1487 pkt->blanks[pkt->nblanks-1].type = pkt->logmode;
1494 static void send_packet(Ssh ssh, int pkttype, ...)
1498 va_start(ap1, pkttype);
1499 va_start(ap2, pkttype);
1500 pkt = construct_packet(ssh, pkttype, ap1, ap2);
1504 ssh_free_packet(pkt);
1507 static void defer_packet(Ssh ssh, int pkttype, ...)
1511 va_start(ap1, pkttype);
1512 va_start(ap2, pkttype);
1513 pkt = construct_packet(ssh, pkttype, ap1, ap2);
1516 s_wrpkt_defer(ssh, pkt);
1517 ssh_free_packet(pkt);
1520 static int ssh_versioncmp(char *a, char *b)
1523 unsigned long av, bv;
1525 av = strtoul(a, &ae, 10);
1526 bv = strtoul(b, &be, 10);
1528 return (av < bv ? -1 : +1);
1533 av = strtoul(ae, &ae, 10);
1534 bv = strtoul(be, &be, 10);
1536 return (av < bv ? -1 : +1);
1541 * Utility routines for putting an SSH-protocol `string' and
1542 * `uint32' into a SHA state.
1545 static void sha_string(SHA_State * s, void *str, int len)
1547 unsigned char lenblk[4];
1548 PUT_32BIT(lenblk, len);
1549 SHA_Bytes(s, lenblk, 4);
1550 SHA_Bytes(s, str, len);
1553 static void sha_uint32(SHA_State * s, unsigned i)
1555 unsigned char intblk[4];
1556 PUT_32BIT(intblk, i);
1557 SHA_Bytes(s, intblk, 4);
1561 * SSH-2 packet construction functions.
1563 static void ssh2_pkt_ensure(struct Packet *pkt, int length)
1565 if (pkt->maxlen < length) {
1566 pkt->maxlen = length + 256;
1567 pkt->data = sresize(pkt->data, pkt->maxlen + APIEXTRA, unsigned char);
1570 static void ssh2_pkt_adddata(struct Packet *pkt, void *data, int len)
1572 if (pkt->logmode != PKTLOG_EMIT) {
1574 pkt->blanks = sresize(pkt->blanks, pkt->nblanks, struct logblank_t);
1575 pkt->blanks[pkt->nblanks-1].offset = pkt->length - 6;
1576 pkt->blanks[pkt->nblanks-1].len = len;
1577 pkt->blanks[pkt->nblanks-1].type = pkt->logmode;
1580 ssh2_pkt_ensure(pkt, pkt->length);
1581 memcpy(pkt->data + pkt->length - len, data, len);
1583 static void ssh2_pkt_addbyte(struct Packet *pkt, unsigned char byte)
1585 ssh2_pkt_adddata(pkt, &byte, 1);
1587 static struct Packet *ssh2_pkt_init(int pkt_type)
1589 struct Packet *pkt = ssh_new_packet();
1592 ssh2_pkt_addbyte(pkt, (unsigned char) pkt_type);
1595 static void ssh2_pkt_addbool(struct Packet *pkt, unsigned char value)
1597 ssh2_pkt_adddata(pkt, &value, 1);
1599 static void ssh2_pkt_adduint32(struct Packet *pkt, unsigned long value)
1602 PUT_32BIT(x, value);
1603 ssh2_pkt_adddata(pkt, x, 4);
1605 static void ssh2_pkt_addstring_start(struct Packet *pkt)
1607 ssh2_pkt_adduint32(pkt, 0);
1608 pkt->savedpos = pkt->length;
1610 static void ssh2_pkt_addstring_str(struct Packet *pkt, char *data)
1612 ssh2_pkt_adddata(pkt, data, strlen(data));
1613 PUT_32BIT(pkt->data + pkt->savedpos - 4, pkt->length - pkt->savedpos);
1615 static void ssh2_pkt_addstring_data(struct Packet *pkt, char *data, int len)
1617 ssh2_pkt_adddata(pkt, data, len);
1618 PUT_32BIT(pkt->data + pkt->savedpos - 4, pkt->length - pkt->savedpos);
1620 static void ssh2_pkt_addstring(struct Packet *pkt, char *data)
1622 ssh2_pkt_addstring_start(pkt);
1623 ssh2_pkt_addstring_str(pkt, data);
1625 static unsigned char *ssh2_mpint_fmt(Bignum b, int *len)
1628 int i, n = (bignum_bitcount(b) + 7) / 8;
1629 p = snewn(n + 1, unsigned char);
1631 fatalbox("out of memory");
1633 for (i = 1; i <= n; i++)
1634 p[i] = bignum_byte(b, n - i);
1636 while (i <= n && p[i] == 0 && (p[i + 1] & 0x80) == 0)
1638 memmove(p, p + i, n + 1 - i);
1642 static void ssh2_pkt_addmp(struct Packet *pkt, Bignum b)
1646 p = ssh2_mpint_fmt(b, &len);
1647 ssh2_pkt_addstring_start(pkt);
1648 ssh2_pkt_addstring_data(pkt, (char *)p, len);
1653 * Construct an SSH-2 final-form packet: compress it, encrypt it,
1654 * put the MAC on it. Final packet, ready to be sent, is stored in
1655 * pkt->data. Total length is returned.
1657 static int ssh2_pkt_construct(Ssh ssh, struct Packet *pkt)
1659 int cipherblk, maclen, padding, i;
1662 log_packet(ssh->logctx, PKT_OUTGOING, pkt->data[5],
1663 ssh2_pkt_type(ssh->pkt_ctx, pkt->data[5]),
1664 pkt->data + 6, pkt->length - 6,
1665 pkt->nblanks, pkt->blanks);
1666 sfree(pkt->blanks); pkt->blanks = NULL;
1670 * Compress packet payload.
1673 unsigned char *newpayload;
1676 ssh->cscomp->compress(ssh->cs_comp_ctx, pkt->data + 5,
1678 &newpayload, &newlen)) {
1680 ssh2_pkt_adddata(pkt, newpayload, newlen);
1686 * Add padding. At least four bytes, and must also bring total
1687 * length (minus MAC) up to a multiple of the block size.
1688 * If pkt->forcepad is set, make sure the packet is at least that size
1691 cipherblk = ssh->cscipher ? ssh->cscipher->blksize : 8; /* block size */
1692 cipherblk = cipherblk < 8 ? 8 : cipherblk; /* or 8 if blksize < 8 */
1694 if (pkt->length + padding < pkt->forcepad)
1695 padding = pkt->forcepad - pkt->length;
1697 (cipherblk - (pkt->length + padding) % cipherblk) % cipherblk;
1698 assert(padding <= 255);
1699 maclen = ssh->csmac ? ssh->csmac->len : 0;
1700 ssh2_pkt_ensure(pkt, pkt->length + padding + maclen);
1701 pkt->data[4] = padding;
1702 for (i = 0; i < padding; i++)
1703 pkt->data[pkt->length + i] = random_byte();
1704 PUT_32BIT(pkt->data, pkt->length + padding - 4);
1706 ssh->csmac->generate(ssh->cs_mac_ctx, pkt->data,
1707 pkt->length + padding,
1708 ssh->v2_outgoing_sequence);
1709 ssh->v2_outgoing_sequence++; /* whether or not we MACed */
1712 ssh->cscipher->encrypt(ssh->cs_cipher_ctx,
1713 pkt->data, pkt->length + padding);
1715 pkt->encrypted_len = pkt->length + padding;
1717 /* Ready-to-send packet starts at pkt->data. We return length. */
1718 return pkt->length + padding + maclen;
1722 * Routines called from the main SSH code to send packets. There
1723 * are quite a few of these, because we have two separate
1724 * mechanisms for delaying the sending of packets:
1726 * - In order to send an IGNORE message and a password message in
1727 * a single fixed-length blob, we require the ability to
1728 * concatenate the encrypted forms of those two packets _into_ a
1729 * single blob and then pass it to our <network.h> transport
1730 * layer in one go. Hence, there's a deferment mechanism which
1731 * works after packet encryption.
1733 * - In order to avoid sending any connection-layer messages
1734 * during repeat key exchange, we have to queue up any such
1735 * outgoing messages _before_ they are encrypted (and in
1736 * particular before they're allocated sequence numbers), and
1737 * then send them once we've finished.
1739 * I call these mechanisms `defer' and `queue' respectively, so as
1740 * to distinguish them reasonably easily.
1742 * The functions send_noqueue() and defer_noqueue() free the packet
1743 * structure they are passed. Every outgoing packet goes through
1744 * precisely one of these functions in its life; packets passed to
1745 * ssh2_pkt_send() or ssh2_pkt_defer() either go straight to one of
1746 * these or get queued, and then when the queue is later emptied
1747 * the packets are all passed to defer_noqueue().
1751 * Send an SSH-2 packet immediately, without queuing or deferring.
1753 static void ssh2_pkt_send_noqueue(Ssh ssh, struct Packet *pkt)
1757 len = ssh2_pkt_construct(ssh, pkt);
1758 backlog = sk_write(ssh->s, (char *)pkt->data, len);
1759 if (backlog > SSH_MAX_BACKLOG)
1760 ssh_throttle_all(ssh, 1, backlog);
1762 ssh->outgoing_data_size += pkt->encrypted_len;
1763 if (!ssh->kex_in_progress &&
1764 ssh->max_data_size != 0 &&
1765 ssh->outgoing_data_size > ssh->max_data_size)
1766 do_ssh2_transport(ssh, "too much data sent", -1, NULL);
1768 ssh_free_packet(pkt);
1772 * Defer an SSH-2 packet.
1774 static void ssh2_pkt_defer_noqueue(Ssh ssh, struct Packet *pkt)
1776 int len = ssh2_pkt_construct(ssh, pkt);
1777 if (ssh->deferred_len + len > ssh->deferred_size) {
1778 ssh->deferred_size = ssh->deferred_len + len + 128;
1779 ssh->deferred_send_data = sresize(ssh->deferred_send_data,
1783 memcpy(ssh->deferred_send_data + ssh->deferred_len, pkt->data, len);
1784 ssh->deferred_len += len;
1785 ssh->deferred_data_size += pkt->encrypted_len;
1786 ssh_free_packet(pkt);
1790 * Queue an SSH-2 packet.
1792 static void ssh2_pkt_queue(Ssh ssh, struct Packet *pkt)
1794 assert(ssh->queueing);
1796 if (ssh->queuelen >= ssh->queuesize) {
1797 ssh->queuesize = ssh->queuelen + 32;
1798 ssh->queue = sresize(ssh->queue, ssh->queuesize, struct Packet *);
1801 ssh->queue[ssh->queuelen++] = pkt;
1805 * Either queue or send a packet, depending on whether queueing is
1808 static void ssh2_pkt_send(Ssh ssh, struct Packet *pkt)
1811 ssh2_pkt_queue(ssh, pkt);
1813 ssh2_pkt_send_noqueue(ssh, pkt);
1818 * Either queue or defer a packet, depending on whether queueing is
1821 static void ssh2_pkt_defer(Ssh ssh, struct Packet *pkt)
1824 ssh2_pkt_queue(ssh, pkt);
1826 ssh2_pkt_defer_noqueue(ssh, pkt);
1831 * Send the whole deferred data block constructed by
1832 * ssh2_pkt_defer() or SSH-1's defer_packet().
1834 * The expected use of the defer mechanism is that you call
1835 * ssh2_pkt_defer() a few times, then call ssh_pkt_defersend(). If
1836 * not currently queueing, this simply sets up deferred_send_data
1837 * and then sends it. If we _are_ currently queueing, the calls to
1838 * ssh2_pkt_defer() put the deferred packets on to the queue
1839 * instead, and therefore ssh_pkt_defersend() has no deferred data
1840 * to send. Hence, there's no need to make it conditional on
1843 static void ssh_pkt_defersend(Ssh ssh)
1846 backlog = sk_write(ssh->s, (char *)ssh->deferred_send_data,
1848 ssh->deferred_len = ssh->deferred_size = 0;
1849 sfree(ssh->deferred_send_data);
1850 ssh->deferred_send_data = NULL;
1851 if (backlog > SSH_MAX_BACKLOG)
1852 ssh_throttle_all(ssh, 1, backlog);
1854 ssh->outgoing_data_size += ssh->deferred_data_size;
1855 if (!ssh->kex_in_progress &&
1856 ssh->max_data_size != 0 &&
1857 ssh->outgoing_data_size > ssh->max_data_size)
1858 do_ssh2_transport(ssh, "too much data sent", -1, NULL);
1859 ssh->deferred_data_size = 0;
1863 * Send all queued SSH-2 packets. We send them by means of
1864 * ssh2_pkt_defer_noqueue(), in case they included a pair of
1865 * packets that needed to be lumped together.
1867 static void ssh2_pkt_queuesend(Ssh ssh)
1871 assert(!ssh->queueing);
1873 for (i = 0; i < ssh->queuelen; i++)
1874 ssh2_pkt_defer_noqueue(ssh, ssh->queue[i]);
1877 ssh_pkt_defersend(ssh);
1881 void bndebug(char *string, Bignum b)
1885 p = ssh2_mpint_fmt(b, &len);
1886 debug(("%s", string));
1887 for (i = 0; i < len; i++)
1888 debug((" %02x", p[i]));
1894 static void sha_mpint(SHA_State * s, Bignum b)
1898 p = ssh2_mpint_fmt(b, &len);
1899 sha_string(s, p, len);
1904 * Packet decode functions for both SSH-1 and SSH-2.
1906 static unsigned long ssh_pkt_getuint32(struct Packet *pkt)
1908 unsigned long value;
1909 if (pkt->length - pkt->savedpos < 4)
1910 return 0; /* arrgh, no way to decline (FIXME?) */
1911 value = GET_32BIT(pkt->body + pkt->savedpos);
1915 static int ssh2_pkt_getbool(struct Packet *pkt)
1917 unsigned long value;
1918 if (pkt->length - pkt->savedpos < 1)
1919 return 0; /* arrgh, no way to decline (FIXME?) */
1920 value = pkt->body[pkt->savedpos] != 0;
1924 static void ssh_pkt_getstring(struct Packet *pkt, char **p, int *length)
1929 if (pkt->length - pkt->savedpos < 4)
1931 len = GET_32BIT(pkt->body + pkt->savedpos);
1936 if (pkt->length - pkt->savedpos < *length)
1938 *p = (char *)(pkt->body + pkt->savedpos);
1939 pkt->savedpos += *length;
1941 static void *ssh_pkt_getdata(struct Packet *pkt, int length)
1943 if (pkt->length - pkt->savedpos < length)
1945 pkt->savedpos += length;
1946 return pkt->body + (pkt->savedpos - length);
1948 static int ssh1_pkt_getrsakey(struct Packet *pkt, struct RSAKey *key,
1949 unsigned char **keystr)
1953 j = makekey(pkt->body + pkt->savedpos,
1954 pkt->length - pkt->savedpos,
1961 assert(pkt->savedpos < pkt->length);
1965 static Bignum ssh1_pkt_getmp(struct Packet *pkt)
1970 j = ssh1_read_bignum(pkt->body + pkt->savedpos,
1971 pkt->length - pkt->savedpos, &b);
1979 static Bignum ssh2_pkt_getmp(struct Packet *pkt)
1985 ssh_pkt_getstring(pkt, &p, &length);
1990 b = bignum_from_bytes((unsigned char *)p, length);
1995 * Helper function to add an SSH-2 signature blob to a packet.
1996 * Expects to be shown the public key blob as well as the signature
1997 * blob. Normally works just like ssh2_pkt_addstring, but will
1998 * fiddle with the signature packet if necessary for
1999 * BUG_SSH2_RSA_PADDING.
2001 static void ssh2_add_sigblob(Ssh ssh, struct Packet *pkt,
2002 void *pkblob_v, int pkblob_len,
2003 void *sigblob_v, int sigblob_len)
2005 unsigned char *pkblob = (unsigned char *)pkblob_v;
2006 unsigned char *sigblob = (unsigned char *)sigblob_v;
2008 /* dmemdump(pkblob, pkblob_len); */
2009 /* dmemdump(sigblob, sigblob_len); */
2012 * See if this is in fact an ssh-rsa signature and a buggy
2013 * server; otherwise we can just do this the easy way.
2015 if ((ssh->remote_bugs & BUG_SSH2_RSA_PADDING) &&
2016 (GET_32BIT(pkblob) == 7 && !memcmp(pkblob+4, "ssh-rsa", 7))) {
2017 int pos, len, siglen;
2020 * Find the byte length of the modulus.
2023 pos = 4+7; /* skip over "ssh-rsa" */
2024 pos += 4 + GET_32BIT(pkblob+pos); /* skip over exponent */
2025 len = GET_32BIT(pkblob+pos); /* find length of modulus */
2026 pos += 4; /* find modulus itself */
2027 while (len > 0 && pkblob[pos] == 0)
2029 /* debug(("modulus length is %d\n", len)); */
2032 * Now find the signature integer.
2034 pos = 4+7; /* skip over "ssh-rsa" */
2035 siglen = GET_32BIT(sigblob+pos);
2036 /* debug(("signature length is %d\n", siglen)); */
2038 if (len != siglen) {
2039 unsigned char newlen[4];
2040 ssh2_pkt_addstring_start(pkt);
2041 ssh2_pkt_addstring_data(pkt, (char *)sigblob, pos);
2042 /* dmemdump(sigblob, pos); */
2043 pos += 4; /* point to start of actual sig */
2044 PUT_32BIT(newlen, len);
2045 ssh2_pkt_addstring_data(pkt, (char *)newlen, 4);
2046 /* dmemdump(newlen, 4); */
2048 while (len-- > siglen) {
2049 ssh2_pkt_addstring_data(pkt, (char *)newlen, 1);
2050 /* dmemdump(newlen, 1); */
2052 ssh2_pkt_addstring_data(pkt, (char *)(sigblob+pos), siglen);
2053 /* dmemdump(sigblob+pos, siglen); */
2057 /* Otherwise fall through and do it the easy way. */
2060 ssh2_pkt_addstring_start(pkt);
2061 ssh2_pkt_addstring_data(pkt, (char *)sigblob, sigblob_len);
2065 * Examine the remote side's version string and compare it against
2066 * a list of known buggy implementations.
2068 static void ssh_detect_bugs(Ssh ssh, char *vstring)
2070 char *imp; /* pointer to implementation part */
2072 imp += strcspn(imp, "-");
2074 imp += strcspn(imp, "-");
2077 ssh->remote_bugs = 0;
2079 if (ssh->cfg.sshbug_ignore1 == FORCE_ON ||
2080 (ssh->cfg.sshbug_ignore1 == AUTO &&
2081 (!strcmp(imp, "1.2.18") || !strcmp(imp, "1.2.19") ||
2082 !strcmp(imp, "1.2.20") || !strcmp(imp, "1.2.21") ||
2083 !strcmp(imp, "1.2.22") || !strcmp(imp, "Cisco-1.25") ||
2084 !strcmp(imp, "OSU_1.4alpha3") || !strcmp(imp, "OSU_1.5alpha4")))) {
2086 * These versions don't support SSH1_MSG_IGNORE, so we have
2087 * to use a different defence against password length
2090 ssh->remote_bugs |= BUG_CHOKES_ON_SSH1_IGNORE;
2091 logevent("We believe remote version has SSH-1 ignore bug");
2094 if (ssh->cfg.sshbug_plainpw1 == FORCE_ON ||
2095 (ssh->cfg.sshbug_plainpw1 == AUTO &&
2096 (!strcmp(imp, "Cisco-1.25") || !strcmp(imp, "OSU_1.4alpha3")))) {
2098 * These versions need a plain password sent; they can't
2099 * handle having a null and a random length of data after
2102 ssh->remote_bugs |= BUG_NEEDS_SSH1_PLAIN_PASSWORD;
2103 logevent("We believe remote version needs a plain SSH-1 password");
2106 if (ssh->cfg.sshbug_rsa1 == FORCE_ON ||
2107 (ssh->cfg.sshbug_rsa1 == AUTO &&
2108 (!strcmp(imp, "Cisco-1.25")))) {
2110 * These versions apparently have no clue whatever about
2111 * RSA authentication and will panic and die if they see
2112 * an AUTH_RSA message.
2114 ssh->remote_bugs |= BUG_CHOKES_ON_RSA;
2115 logevent("We believe remote version can't handle SSH-1 RSA authentication");
2118 if (ssh->cfg.sshbug_hmac2 == FORCE_ON ||
2119 (ssh->cfg.sshbug_hmac2 == AUTO &&
2120 !wc_match("* VShell", imp) &&
2121 (wc_match("2.1.0*", imp) || wc_match("2.0.*", imp) ||
2122 wc_match("2.2.0*", imp) || wc_match("2.3.0*", imp) ||
2123 wc_match("2.1 *", imp)))) {
2125 * These versions have the HMAC bug.
2127 ssh->remote_bugs |= BUG_SSH2_HMAC;
2128 logevent("We believe remote version has SSH-2 HMAC bug");
2131 if (ssh->cfg.sshbug_derivekey2 == FORCE_ON ||
2132 (ssh->cfg.sshbug_derivekey2 == AUTO &&
2133 !wc_match("* VShell", imp) &&
2134 (wc_match("2.0.0*", imp) || wc_match("2.0.10*", imp) ))) {
2136 * These versions have the key-derivation bug (failing to
2137 * include the literal shared secret in the hashes that
2138 * generate the keys).
2140 ssh->remote_bugs |= BUG_SSH2_DERIVEKEY;
2141 logevent("We believe remote version has SSH-2 key-derivation bug");
2144 if (ssh->cfg.sshbug_rsapad2 == FORCE_ON ||
2145 (ssh->cfg.sshbug_rsapad2 == AUTO &&
2146 (wc_match("OpenSSH_2.[5-9]*", imp) ||
2147 wc_match("OpenSSH_3.[0-2]*", imp)))) {
2149 * These versions have the SSH-2 RSA padding bug.
2151 ssh->remote_bugs |= BUG_SSH2_RSA_PADDING;
2152 logevent("We believe remote version has SSH-2 RSA padding bug");
2155 if (ssh->cfg.sshbug_pksessid2 == FORCE_ON ||
2156 (ssh->cfg.sshbug_pksessid2 == AUTO &&
2157 wc_match("OpenSSH_2.[0-2]*", imp))) {
2159 * These versions have the SSH-2 session-ID bug in
2160 * public-key authentication.
2162 ssh->remote_bugs |= BUG_SSH2_PK_SESSIONID;
2163 logevent("We believe remote version has SSH-2 public-key-session-ID bug");
2166 if (ssh->cfg.sshbug_rekey2 == FORCE_ON ||
2167 (ssh->cfg.sshbug_rekey2 == AUTO &&
2168 (wc_match("OpenSSH_2.[0-4]*", imp) ||
2169 wc_match("OpenSSH_2.5.[0-3]*", imp) ||
2170 wc_match("Sun_SSH_1.0", imp) ||
2171 wc_match("Sun_SSH_1.0.1", imp)))) {
2173 * These versions have the SSH-2 rekey bug.
2175 ssh->remote_bugs |= BUG_SSH2_REKEY;
2176 logevent("We believe remote version has SSH-2 rekey bug");
2181 * The `software version' part of an SSH version string is required
2182 * to contain no spaces or minus signs.
2184 static void ssh_fix_verstring(char *str)
2186 /* Eat "SSH-<protoversion>-". */
2187 assert(*str == 'S'); str++;
2188 assert(*str == 'S'); str++;
2189 assert(*str == 'H'); str++;
2190 assert(*str == '-'); str++;
2191 while (*str && *str != '-') str++;
2192 assert(*str == '-'); str++;
2194 /* Convert minus signs and spaces in the remaining string into
2197 if (*str == '-' || *str == ' ')
2203 static int do_ssh_init(Ssh ssh, unsigned char c)
2205 struct do_ssh_init_state {
2213 crState(do_ssh_init_state);
2215 crBegin(ssh->do_ssh_init_crstate);
2217 /* Search for the string "SSH-" in the input. */
2220 static const int transS[] = { 1, 2, 2, 1 };
2221 static const int transH[] = { 0, 0, 3, 0 };
2222 static const int transminus[] = { 0, 0, 0, -1 };
2224 s->i = transS[s->i];
2226 s->i = transH[s->i];
2228 s->i = transminus[s->i];
2233 crReturn(1); /* get another character */
2237 s->vstring = snewn(s->vstrsize, char);
2238 strcpy(s->vstring, "SSH-");
2242 crReturn(1); /* get another char */
2243 if (s->vslen >= s->vstrsize - 1) {
2245 s->vstring = sresize(s->vstring, s->vstrsize, char);
2247 s->vstring[s->vslen++] = c;
2250 s->version[s->i] = '\0';
2252 } else if (s->i < sizeof(s->version) - 1)
2253 s->version[s->i++] = c;
2254 } else if (c == '\012')
2258 ssh->agentfwd_enabled = FALSE;
2259 ssh->rdpkt2_state.incoming_sequence = 0;
2261 s->vstring[s->vslen] = 0;
2262 s->vstring[strcspn(s->vstring, "\015\012")] = '\0';/* remove EOL chars */
2263 logeventf(ssh, "Server version: %s", s->vstring);
2264 ssh_detect_bugs(ssh, s->vstring);
2267 * Decide which SSH protocol version to support.
2270 /* Anything strictly below "2.0" means protocol 1 is supported. */
2271 s->proto1 = ssh_versioncmp(s->version, "2.0") < 0;
2272 /* Anything greater or equal to "1.99" means protocol 2 is supported. */
2273 s->proto2 = ssh_versioncmp(s->version, "1.99") >= 0;
2275 if (ssh->cfg.sshprot == 0 && !s->proto1) {
2276 bombout(("SSH protocol version 1 required by user but not provided by server"));
2279 if (ssh->cfg.sshprot == 3 && !s->proto2) {
2280 bombout(("SSH protocol version 2 required by user but not provided by server"));
2287 if (s->proto2 && (ssh->cfg.sshprot >= 2 || !s->proto1)) {
2289 * Construct a v2 version string.
2291 verstring = dupprintf("SSH-2.0-%s\015\012", sshver);
2295 * Construct a v1 version string.
2297 verstring = dupprintf("SSH-%s-%s\012",
2298 (ssh_versioncmp(s->version, "1.5") <= 0 ?
2299 s->version : "1.5"),
2304 ssh_fix_verstring(verstring);
2306 if (ssh->version == 2) {
2308 * Hash our version string and their version string.
2310 SHA_Init(&ssh->exhashbase);
2311 sha_string(&ssh->exhashbase, verstring,
2312 strcspn(verstring, "\015\012"));
2313 sha_string(&ssh->exhashbase, s->vstring,
2314 strcspn(s->vstring, "\015\012"));
2317 * Initialise SSH-2 protocol.
2319 ssh->protocol = ssh2_protocol;
2320 ssh2_protocol_setup(ssh);
2321 ssh->s_rdpkt = ssh2_rdpkt;
2324 * Initialise SSH-1 protocol.
2326 ssh->protocol = ssh1_protocol;
2327 ssh1_protocol_setup(ssh);
2328 ssh->s_rdpkt = ssh1_rdpkt;
2330 logeventf(ssh, "We claim version: %.*s",
2331 strcspn(verstring, "\015\012"), verstring);
2332 sk_write(ssh->s, verstring, strlen(verstring));
2336 logeventf(ssh, "Using SSH protocol version %d", ssh->version);
2338 update_specials_menu(ssh->frontend);
2339 ssh->state = SSH_STATE_BEFORE_SIZE;
2340 ssh->pinger = pinger_new(&ssh->cfg, &ssh_backend, ssh);
2347 static void ssh_process_incoming_data(Ssh ssh,
2348 unsigned char **data, int *datalen)
2350 struct Packet *pktin = ssh->s_rdpkt(ssh, data, datalen);
2352 ssh->protocol(ssh, NULL, 0, pktin);
2353 ssh_free_packet(pktin);
2357 static void ssh_queue_incoming_data(Ssh ssh,
2358 unsigned char **data, int *datalen)
2360 bufchain_add(&ssh->queued_incoming_data, *data, *datalen);
2365 static void ssh_process_queued_incoming_data(Ssh ssh)
2368 unsigned char *data;
2371 while (!ssh->frozen && bufchain_size(&ssh->queued_incoming_data)) {
2372 bufchain_prefix(&ssh->queued_incoming_data, &vdata, &len);
2376 while (!ssh->frozen && len > 0)
2377 ssh_process_incoming_data(ssh, &data, &len);
2380 bufchain_consume(&ssh->queued_incoming_data, origlen - len);
2384 static void ssh_set_frozen(Ssh ssh, int frozen)
2387 sk_set_frozen(ssh->s, frozen);
2388 ssh->frozen = frozen;
2391 static void ssh_gotdata(Ssh ssh, unsigned char *data, int datalen)
2393 crBegin(ssh->ssh_gotdata_crstate);
2396 * To begin with, feed the characters one by one to the
2397 * protocol initialisation / selection function do_ssh_init().
2398 * When that returns 0, we're done with the initial greeting
2399 * exchange and can move on to packet discipline.
2402 int ret; /* need not be kept across crReturn */
2404 crReturnV; /* more data please */
2405 ret = do_ssh_init(ssh, *data);
2413 * We emerge from that loop when the initial negotiation is
2414 * over and we have selected an s_rdpkt function. Now pass
2415 * everything to s_rdpkt, and then pass the resulting packets
2416 * to the proper protocol handler.
2422 * Process queued data if there is any.
2424 ssh_process_queued_incoming_data(ssh);
2427 while (datalen > 0) {
2429 ssh_queue_incoming_data(ssh, &data, &datalen);
2431 ssh_process_incoming_data(ssh, &data, &datalen);
2433 if (ssh->state == SSH_STATE_CLOSED)
2441 static int ssh_do_close(Ssh ssh, int notify_exit)
2444 struct ssh_channel *c;
2446 ssh->state = SSH_STATE_CLOSED;
2447 expire_timer_context(ssh);
2452 notify_remote_exit(ssh->frontend);
2457 * Now we must shut down any port- and X-forwarded channels going
2458 * through this connection.
2460 if (ssh->channels) {
2461 while (NULL != (c = index234(ssh->channels, 0))) {
2464 x11_close(c->u.x11.s);
2467 pfd_close(c->u.pfd.s);
2470 del234(ssh->channels, c); /* moving next one to index 0 */
2471 if (ssh->version == 2)
2472 bufchain_clear(&c->v.v2.outbuffer);
2477 * Go through port-forwardings, and close any associated
2478 * listening sockets.
2480 if (ssh->portfwds) {
2481 struct ssh_portfwd *pf;
2482 while (NULL != (pf = index234(ssh->portfwds, 0))) {
2483 /* Dispose of any listening socket. */
2485 pfd_terminate(pf->local);
2486 del234(ssh->portfwds, pf); /* moving next one to index 0 */
2494 static void ssh_log(Plug plug, int type, SockAddr addr, int port,
2495 const char *error_msg, int error_code)
2497 Ssh ssh = (Ssh) plug;
2498 char addrbuf[256], *msg;
2500 sk_getaddr(addr, addrbuf, lenof(addrbuf));
2503 msg = dupprintf("Connecting to %s port %d", addrbuf, port);
2505 msg = dupprintf("Failed to connect to %s: %s", addrbuf, error_msg);
2511 static int ssh_closing(Plug plug, const char *error_msg, int error_code,
2514 Ssh ssh = (Ssh) plug;
2515 int need_notify = ssh_do_close(ssh, FALSE);
2517 if (!error_msg && !ssh->close_expected) {
2518 error_msg = "Server unexpectedly closed network connection";
2522 notify_remote_exit(ssh->frontend);
2525 /* A socket error has occurred. */
2526 logevent(error_msg);
2527 connection_fatal(ssh->frontend, "%s", error_msg);
2529 logevent("Server closed network connection");
2534 static int ssh_receive(Plug plug, int urgent, char *data, int len)
2536 Ssh ssh = (Ssh) plug;
2537 ssh_gotdata(ssh, (unsigned char *)data, len);
2538 if (ssh->state == SSH_STATE_CLOSED) {
2539 ssh_do_close(ssh, TRUE);
2545 static void ssh_sent(Plug plug, int bufsize)
2547 Ssh ssh = (Ssh) plug;
2549 * If the send backlog on the SSH socket itself clears, we
2550 * should unthrottle the whole world if it was throttled.
2552 if (bufsize < SSH_MAX_BACKLOG)
2553 ssh_throttle_all(ssh, 0, bufsize);
2557 * Connect to specified host and port.
2558 * Returns an error message, or NULL on success.
2559 * Also places the canonical host name into `realhost'. It must be
2560 * freed by the caller.
2562 static const char *connect_to_host(Ssh ssh, char *host, int port,
2563 char **realhost, int nodelay, int keepalive)
2565 static const struct plug_function_table fn_table = {
2576 ssh->savedhost = snewn(1 + strlen(host), char);
2577 if (!ssh->savedhost)
2578 fatalbox("Out of memory");
2579 strcpy(ssh->savedhost, host);
2582 port = 22; /* default ssh port */
2583 ssh->savedport = port;
2588 logeventf(ssh, "Looking up host \"%s\"%s", host,
2589 (ssh->cfg.addressfamily == ADDRTYPE_IPV4 ? " (IPv4)" :
2590 (ssh->cfg.addressfamily == ADDRTYPE_IPV6 ? " (IPv6)" : "")));
2591 addr = name_lookup(host, port, realhost, &ssh->cfg,
2592 ssh->cfg.addressfamily);
2593 if ((err = sk_addr_error(addr)) != NULL) {
2601 ssh->fn = &fn_table;
2602 ssh->s = new_connection(addr, *realhost, port,
2603 0, 1, nodelay, keepalive, (Plug) ssh, &ssh->cfg);
2604 if ((err = sk_socket_error(ssh->s)) != NULL) {
2606 notify_remote_exit(ssh->frontend);
2614 * Throttle or unthrottle the SSH connection.
2616 static void ssh1_throttle(Ssh ssh, int adjust)
2618 int old_count = ssh->v1_throttle_count;
2619 ssh->v1_throttle_count += adjust;
2620 assert(ssh->v1_throttle_count >= 0);
2621 if (ssh->v1_throttle_count && !old_count) {
2622 ssh_set_frozen(ssh, 1);
2623 } else if (!ssh->v1_throttle_count && old_count) {
2624 ssh_set_frozen(ssh, 0);
2629 * Throttle or unthrottle _all_ local data streams (for when sends
2630 * on the SSH connection itself back up).
2632 static void ssh_throttle_all(Ssh ssh, int enable, int bufsize)
2635 struct ssh_channel *c;
2637 if (enable == ssh->throttled_all)
2639 ssh->throttled_all = enable;
2640 ssh->overall_bufsize = bufsize;
2643 for (i = 0; NULL != (c = index234(ssh->channels, i)); i++) {
2645 case CHAN_MAINSESSION:
2647 * This is treated separately, outside the switch.
2651 x11_override_throttle(c->u.x11.s, enable);
2654 /* Agent channels require no buffer management. */
2657 pfd_override_throttle(c->u.pfd.s, enable);
2664 * Username and password input, abstracted off into routines
2665 * reusable in several places - even between SSH-1 and SSH-2.
2668 /* Set up a username or password input loop on a given buffer. */
2669 static void setup_userpass_input(Ssh ssh, char *buffer, int buflen, int echo)
2671 ssh->userpass_input_buffer = buffer;
2672 ssh->userpass_input_buflen = buflen;
2673 ssh->userpass_input_bufpos = 0;
2674 ssh->userpass_input_echo = echo;
2678 * Process some terminal data in the course of username/password
2679 * input. Returns >0 for success (line of input returned in
2680 * buffer), <0 for failure (user hit ^C/^D, bomb out and exit), 0
2681 * for inconclusive (keep waiting for more input please).
2683 static int process_userpass_input(Ssh ssh, unsigned char *in, int inlen)
2688 switch (c = *in++) {
2691 ssh->userpass_input_buffer[ssh->userpass_input_bufpos] = 0;
2692 ssh->userpass_input_buffer[ssh->userpass_input_buflen-1] = 0;
2697 if (ssh->userpass_input_bufpos > 0) {
2698 if (ssh->userpass_input_echo)
2699 c_write_str(ssh, "\b \b");
2700 ssh->userpass_input_bufpos--;
2705 while (ssh->userpass_input_bufpos > 0) {
2706 if (ssh->userpass_input_echo)
2707 c_write_str(ssh, "\b \b");
2708 ssh->userpass_input_bufpos--;
2717 * This simplistic check for printability is disabled
2718 * when we're doing password input, because some people
2719 * have control characters in their passwords.o
2721 if ((!ssh->userpass_input_echo ||
2722 (c >= ' ' && c <= '~') ||
2723 ((unsigned char) c >= 160))
2724 && ssh->userpass_input_bufpos < ssh->userpass_input_buflen-1) {
2725 ssh->userpass_input_buffer[ssh->userpass_input_bufpos++] = c;
2726 if (ssh->userpass_input_echo)
2727 c_write(ssh, &c, 1);
2735 static void ssh_agent_callback(void *sshv, void *reply, int replylen)
2737 Ssh ssh = (Ssh) sshv;
2739 ssh->agent_response = reply;
2740 ssh->agent_response_len = replylen;
2742 if (ssh->version == 1)
2743 do_ssh1_login(ssh, NULL, -1, NULL);
2745 do_ssh2_authconn(ssh, NULL, -1, NULL);
2748 static void ssh_dialog_callback(void *sshv, int ret)
2750 Ssh ssh = (Ssh) sshv;
2752 ssh->user_response = ret;
2754 if (ssh->version == 1)
2755 do_ssh1_login(ssh, NULL, -1, NULL);
2757 do_ssh2_transport(ssh, NULL, -1, NULL);
2760 * This may have unfrozen the SSH connection, so do a
2763 ssh_process_queued_incoming_data(ssh);
2766 static void ssh_agentf_callback(void *cv, void *reply, int replylen)
2768 struct ssh_channel *c = (struct ssh_channel *)cv;
2770 void *sentreply = reply;
2773 /* Fake SSH_AGENT_FAILURE. */
2774 sentreply = "\0\0\0\1\5";
2777 if (ssh->version == 2) {
2778 ssh2_add_channel_data(c, sentreply, replylen);
2781 send_packet(ssh, SSH1_MSG_CHANNEL_DATA,
2782 PKT_INT, c->remoteid,
2785 PKT_DATA, sentreply, replylen,
2794 * Handle the key exchange and user authentication phases.
2796 static int do_ssh1_login(Ssh ssh, unsigned char *in, int inlen,
2797 struct Packet *pktin)
2800 unsigned char cookie[8], *ptr;
2801 struct RSAKey servkey, hostkey;
2802 struct MD5Context md5c;
2803 struct do_ssh1_login_state {
2805 unsigned char *rsabuf, *keystr1, *keystr2;
2806 unsigned long supported_ciphers_mask, supported_auths_mask;
2807 int tried_publickey, tried_agent;
2808 int tis_auth_refused, ccard_auth_refused;
2809 unsigned char session_id[16];
2812 void *publickey_blob;
2813 int publickey_bloblen;
2819 unsigned char request[5], *response, *p;
2829 crState(do_ssh1_login_state);
2831 crBegin(ssh->do_ssh1_login_crstate);
2836 if (pktin->type != SSH1_SMSG_PUBLIC_KEY) {
2837 bombout(("Public key packet not received"));
2841 logevent("Received public keys");
2843 ptr = ssh_pkt_getdata(pktin, 8);
2845 bombout(("SSH-1 public key packet stopped before random cookie"));
2848 memcpy(cookie, ptr, 8);
2850 if (!ssh1_pkt_getrsakey(pktin, &servkey, &s->keystr1) ||
2851 !ssh1_pkt_getrsakey(pktin, &hostkey, &s->keystr2)) {
2852 bombout(("Failed to read SSH-1 public keys from public key packet"));
2857 * Log the host key fingerprint.
2861 logevent("Host key fingerprint is:");
2862 strcpy(logmsg, " ");
2863 hostkey.comment = NULL;
2864 rsa_fingerprint(logmsg + strlen(logmsg),
2865 sizeof(logmsg) - strlen(logmsg), &hostkey);
2869 ssh->v1_remote_protoflags = ssh_pkt_getuint32(pktin);
2870 s->supported_ciphers_mask = ssh_pkt_getuint32(pktin);
2871 s->supported_auths_mask = ssh_pkt_getuint32(pktin);
2873 ssh->v1_local_protoflags =
2874 ssh->v1_remote_protoflags & SSH1_PROTOFLAGS_SUPPORTED;
2875 ssh->v1_local_protoflags |= SSH1_PROTOFLAG_SCREEN_NUMBER;
2878 MD5Update(&md5c, s->keystr2, hostkey.bytes);
2879 MD5Update(&md5c, s->keystr1, servkey.bytes);
2880 MD5Update(&md5c, cookie, 8);
2881 MD5Final(s->session_id, &md5c);
2883 for (i = 0; i < 32; i++)
2884 ssh->session_key[i] = random_byte();
2887 * Verify that the `bits' and `bytes' parameters match.
2889 if (hostkey.bits > hostkey.bytes * 8 ||
2890 servkey.bits > servkey.bytes * 8) {
2891 bombout(("SSH-1 public keys were badly formatted"));
2895 s->len = (hostkey.bytes > servkey.bytes ? hostkey.bytes : servkey.bytes);
2897 s->rsabuf = snewn(s->len, unsigned char);
2899 fatalbox("Out of memory");
2902 * Verify the host key.
2906 * First format the key into a string.
2908 int len = rsastr_len(&hostkey);
2909 char fingerprint[100];
2910 char *keystr = snewn(len, char);
2912 fatalbox("Out of memory");
2913 rsastr_fmt(keystr, &hostkey);
2914 rsa_fingerprint(fingerprint, sizeof(fingerprint), &hostkey);
2916 ssh_set_frozen(ssh, 1);
2917 s->dlgret = verify_ssh_host_key(ssh->frontend,
2918 ssh->savedhost, ssh->savedport,
2919 "rsa", keystr, fingerprint,
2920 ssh_dialog_callback, ssh);
2922 if (s->dlgret < 0) {
2926 bombout(("Unexpected data from server while waiting"
2927 " for user host key response"));
2930 } while (pktin || inlen > 0);
2931 s->dlgret = ssh->user_response;
2933 ssh_set_frozen(ssh, 0);
2935 if (s->dlgret == 0) {
2936 ssh->close_expected = TRUE;
2937 ssh_closing((Plug)ssh, NULL, 0, 0);
2942 for (i = 0; i < 32; i++) {
2943 s->rsabuf[i] = ssh->session_key[i];
2945 s->rsabuf[i] ^= s->session_id[i];
2948 if (hostkey.bytes > servkey.bytes) {
2949 ret = rsaencrypt(s->rsabuf, 32, &servkey);
2951 ret = rsaencrypt(s->rsabuf, servkey.bytes, &hostkey);
2953 ret = rsaencrypt(s->rsabuf, 32, &hostkey);
2955 ret = rsaencrypt(s->rsabuf, hostkey.bytes, &servkey);
2958 bombout(("SSH-1 public key encryptions failed due to bad formatting"));
2962 logevent("Encrypted session key");
2965 int cipher_chosen = 0, warn = 0;
2966 char *cipher_string = NULL;
2968 for (i = 0; !cipher_chosen && i < CIPHER_MAX; i++) {
2969 int next_cipher = ssh->cfg.ssh_cipherlist[i];
2970 if (next_cipher == CIPHER_WARN) {
2971 /* If/when we choose a cipher, warn about it */
2973 } else if (next_cipher == CIPHER_AES) {
2974 /* XXX Probably don't need to mention this. */
2975 logevent("AES not supported in SSH-1, skipping");
2977 switch (next_cipher) {
2978 case CIPHER_3DES: s->cipher_type = SSH_CIPHER_3DES;
2979 cipher_string = "3DES"; break;
2980 case CIPHER_BLOWFISH: s->cipher_type = SSH_CIPHER_BLOWFISH;
2981 cipher_string = "Blowfish"; break;
2982 case CIPHER_DES: s->cipher_type = SSH_CIPHER_DES;
2983 cipher_string = "single-DES"; break;
2985 if (s->supported_ciphers_mask & (1 << s->cipher_type))
2989 if (!cipher_chosen) {
2990 if ((s->supported_ciphers_mask & (1 << SSH_CIPHER_3DES)) == 0)
2991 bombout(("Server violates SSH-1 protocol by not "
2992 "supporting 3DES encryption"));
2994 /* shouldn't happen */
2995 bombout(("No supported ciphers found"));
2999 /* Warn about chosen cipher if necessary. */
3001 ssh_set_frozen(ssh, 1);
3002 s->dlgret = askalg(ssh->frontend, "cipher", cipher_string,
3003 ssh_dialog_callback, ssh);
3004 if (s->dlgret < 0) {
3008 bombout(("Unexpected data from server while waiting"
3009 " for user response"));
3012 } while (pktin || inlen > 0);
3013 s->dlgret = ssh->user_response;
3015 ssh_set_frozen(ssh, 0);
3016 if (s->dlgret == 0) {
3017 ssh->close_expected = TRUE;
3018 ssh_closing((Plug)ssh, NULL, 0, 0);
3024 switch (s->cipher_type) {
3025 case SSH_CIPHER_3DES:
3026 logevent("Using 3DES encryption");
3028 case SSH_CIPHER_DES:
3029 logevent("Using single-DES encryption");
3031 case SSH_CIPHER_BLOWFISH:
3032 logevent("Using Blowfish encryption");
3036 send_packet(ssh, SSH1_CMSG_SESSION_KEY,
3037 PKT_CHAR, s->cipher_type,
3038 PKT_DATA, cookie, 8,
3039 PKT_CHAR, (s->len * 8) >> 8, PKT_CHAR, (s->len * 8) & 0xFF,
3040 PKT_DATA, s->rsabuf, s->len,
3041 PKT_INT, ssh->v1_local_protoflags, PKT_END);
3043 logevent("Trying to enable encryption...");
3047 ssh->cipher = (s->cipher_type == SSH_CIPHER_BLOWFISH ? &ssh_blowfish_ssh1 :
3048 s->cipher_type == SSH_CIPHER_DES ? &ssh_des :
3050 ssh->v1_cipher_ctx = ssh->cipher->make_context();
3051 ssh->cipher->sesskey(ssh->v1_cipher_ctx, ssh->session_key);
3052 logeventf(ssh, "Initialised %s encryption", ssh->cipher->text_name);
3054 ssh->crcda_ctx = crcda_make_context();
3055 logevent("Installing CRC compensation attack detector");
3057 if (servkey.modulus) {
3058 sfree(servkey.modulus);
3059 servkey.modulus = NULL;
3061 if (servkey.exponent) {
3062 sfree(servkey.exponent);
3063 servkey.exponent = NULL;
3065 if (hostkey.modulus) {
3066 sfree(hostkey.modulus);
3067 hostkey.modulus = NULL;
3069 if (hostkey.exponent) {
3070 sfree(hostkey.exponent);
3071 hostkey.exponent = NULL;
3075 if (pktin->type != SSH1_SMSG_SUCCESS) {
3076 bombout(("Encryption not successfully enabled"));
3080 logevent("Successfully started encryption");
3084 if (!*ssh->cfg.username) {
3085 if (ssh_get_line && !ssh_getline_pw_only) {
3086 if (!ssh_get_line("login as: ",
3087 s->username, sizeof(s->username), FALSE)) {
3089 * get_line failed to get a username.
3092 logevent("No username provided. Abandoning session.");
3093 ssh->close_expected = TRUE;
3094 ssh_closing((Plug)ssh, NULL, 0, 0);
3098 int ret; /* need not be kept over crReturn */
3099 c_write_str(ssh, "login as: ");
3102 setup_userpass_input(ssh, s->username, sizeof(s->username), 1);
3104 crWaitUntil(!pktin);
3105 ret = process_userpass_input(ssh, in, inlen);
3109 c_write_str(ssh, "\r\n");
3112 strncpy(s->username, ssh->cfg.username, sizeof(s->username));
3113 s->username[sizeof(s->username)-1] = '\0';
3116 send_packet(ssh, SSH1_CMSG_USER, PKT_STR, s->username, PKT_END);
3118 char userlog[22 + sizeof(s->username)];
3119 sprintf(userlog, "Sent username \"%s\"", s->username);
3121 if (flags & FLAG_INTERACTIVE &&
3122 (!((flags & FLAG_STDERR) && (flags & FLAG_VERBOSE)))) {
3123 strcat(userlog, "\r\n");
3124 c_write_str(ssh, userlog);
3131 if ((ssh->remote_bugs & BUG_CHOKES_ON_RSA)) {
3132 /* We must not attempt PK auth. Pretend we've already tried it. */
3133 s->tried_publickey = s->tried_agent = 1;
3135 s->tried_publickey = s->tried_agent = 0;
3137 s->tis_auth_refused = s->ccard_auth_refused = 0;
3138 /* Load the public half of ssh->cfg.keyfile so we notice if it's in Pageant */
3139 if (!filename_is_null(ssh->cfg.keyfile)) {
3140 if (!rsakey_pubblob(&ssh->cfg.keyfile,
3141 &s->publickey_blob, &s->publickey_bloblen, NULL))
3142 s->publickey_blob = NULL;
3144 s->publickey_blob = NULL;
3146 while (pktin->type == SSH1_SMSG_FAILURE) {
3147 s->pwpkt_type = SSH1_CMSG_AUTH_PASSWORD;
3149 if (agent_exists() && !s->tried_agent) {
3151 * Attempt RSA authentication using Pageant.
3157 logevent("Pageant is running. Requesting keys.");
3159 /* Request the keys held by the agent. */
3160 PUT_32BIT(s->request, 1);
3161 s->request[4] = SSH1_AGENTC_REQUEST_RSA_IDENTITIES;
3162 if (!agent_query(s->request, 5, &r, &s->responselen,
3163 ssh_agent_callback, ssh)) {
3167 bombout(("Unexpected data from server while waiting"
3168 " for agent response"));
3171 } while (pktin || inlen > 0);
3172 r = ssh->agent_response;
3173 s->responselen = ssh->agent_response_len;
3175 s->response = (unsigned char *) r;
3176 if (s->response && s->responselen >= 5 &&
3177 s->response[4] == SSH1_AGENT_RSA_IDENTITIES_ANSWER) {
3178 s->p = s->response + 5;
3179 s->nkeys = GET_32BIT(s->p);
3181 logeventf(ssh, "Pageant has %d SSH-1 keys", s->nkeys);
3182 for (s->keyi = 0; s->keyi < s->nkeys; s->keyi++) {
3183 logeventf(ssh, "Trying Pageant key #%d", s->keyi);
3184 if (s->publickey_blob &&
3185 !memcmp(s->p, s->publickey_blob,
3186 s->publickey_bloblen)) {
3187 logevent("This key matches configured key file");
3188 s->tried_publickey = 1;
3193 do { /* do while (0) to make breaking easy */
3194 n = ssh1_read_bignum
3195 (s->p, s->responselen-(s->p-s->response),
3200 n = ssh1_read_bignum
3201 (s->p, s->responselen-(s->p-s->response),
3206 if (s->responselen - (s->p-s->response) < 4)
3208 s->commentlen = GET_32BIT(s->p);
3210 if (s->responselen - (s->p-s->response) <
3213 s->commentp = (char *)s->p;
3214 s->p += s->commentlen;
3218 logevent("Pageant key list packet was truncated");
3222 send_packet(ssh, SSH1_CMSG_AUTH_RSA,
3223 PKT_BIGNUM, s->key.modulus, PKT_END);
3225 if (pktin->type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
3226 logevent("Key refused");
3229 logevent("Received RSA challenge");
3230 if ((s->challenge = ssh1_pkt_getmp(pktin)) == NULL) {
3231 bombout(("Server's RSA challenge was badly formatted"));
3236 char *agentreq, *q, *ret;
3239 len = 1 + 4; /* message type, bit count */
3240 len += ssh1_bignum_length(s->key.exponent);
3241 len += ssh1_bignum_length(s->key.modulus);
3242 len += ssh1_bignum_length(s->challenge);
3243 len += 16; /* session id */
3244 len += 4; /* response format */
3245 agentreq = snewn(4 + len, char);
3246 PUT_32BIT(agentreq, len);
3248 *q++ = SSH1_AGENTC_RSA_CHALLENGE;
3249 PUT_32BIT(q, bignum_bitcount(s->key.modulus));
3251 q += ssh1_write_bignum(q, s->key.exponent);
3252 q += ssh1_write_bignum(q, s->key.modulus);
3253 q += ssh1_write_bignum(q, s->challenge);
3254 memcpy(q, s->session_id, 16);
3256 PUT_32BIT(q, 1); /* response format */
3257 if (!agent_query(agentreq, len + 4, &vret, &retlen,
3258 ssh_agent_callback, ssh)) {
3263 bombout(("Unexpected data from server"
3264 " while waiting for agent"
3268 } while (pktin || inlen > 0);
3269 vret = ssh->agent_response;
3270 retlen = ssh->agent_response_len;
3275 if (ret[4] == SSH1_AGENT_RSA_RESPONSE) {
3276 logevent("Sending Pageant's response");
3277 send_packet(ssh, SSH1_CMSG_AUTH_RSA_RESPONSE,
3278 PKT_DATA, ret + 5, 16,
3282 if (pktin->type == SSH1_SMSG_SUCCESS) {
3284 ("Pageant's response accepted");
3285 if (flags & FLAG_VERBOSE) {
3286 c_write_str(ssh, "Authenticated using"
3288 c_write(ssh, s->commentp,
3290 c_write_str(ssh, "\" from agent\r\n");
3295 ("Pageant's response not accepted");
3298 ("Pageant failed to answer challenge");
3302 logevent("No reply received from Pageant");
3305 freebn(s->key.exponent);
3306 freebn(s->key.modulus);
3307 freebn(s->challenge);
3316 if (!filename_is_null(ssh->cfg.keyfile) && !s->tried_publickey)
3317 s->pwpkt_type = SSH1_CMSG_AUTH_RSA;
3319 if (ssh->cfg.try_tis_auth &&
3320 (s->supported_auths_mask & (1 << SSH1_AUTH_TIS)) &&
3321 !s->tis_auth_refused) {
3322 s->pwpkt_type = SSH1_CMSG_AUTH_TIS_RESPONSE;
3323 logevent("Requested TIS authentication");
3324 send_packet(ssh, SSH1_CMSG_AUTH_TIS, PKT_END);
3326 if (pktin->type != SSH1_SMSG_AUTH_TIS_CHALLENGE) {
3327 logevent("TIS authentication declined");
3328 if (flags & FLAG_INTERACTIVE)
3329 c_write_str(ssh, "TIS authentication refused.\r\n");
3330 s->tis_auth_refused = 1;
3336 ssh_pkt_getstring(pktin, &challenge, &challengelen);
3338 bombout(("TIS challenge packet was badly formed"));
3341 c_write_str(ssh, "Using TIS authentication.\r\n");
3342 logevent("Received TIS challenge");
3343 if (challengelen > sizeof(s->prompt) - 1)
3344 challengelen = sizeof(s->prompt) - 1;/* prevent overrun */
3345 memcpy(s->prompt, challenge, challengelen);
3346 /* Prompt heuristic comes from OpenSSH */
3347 strncpy(s->prompt + challengelen,
3348 memchr(s->prompt, '\n', challengelen) ?
3349 "": "\r\nResponse: ",
3350 (sizeof s->prompt) - challengelen);
3351 s->prompt[(sizeof s->prompt) - 1] = '\0';
3354 if (ssh->cfg.try_tis_auth &&
3355 (s->supported_auths_mask & (1 << SSH1_AUTH_CCARD)) &&
3356 !s->ccard_auth_refused) {
3357 s->pwpkt_type = SSH1_CMSG_AUTH_CCARD_RESPONSE;
3358 logevent("Requested CryptoCard authentication");
3359 send_packet(ssh, SSH1_CMSG_AUTH_CCARD, PKT_END);
3361 if (pktin->type != SSH1_SMSG_AUTH_CCARD_CHALLENGE) {
3362 logevent("CryptoCard authentication declined");
3363 c_write_str(ssh, "CryptoCard authentication refused.\r\n");
3364 s->ccard_auth_refused = 1;
3370 ssh_pkt_getstring(pktin, &challenge, &challengelen);
3372 bombout(("CryptoCard challenge packet was badly formed"));
3375 c_write_str(ssh, "Using CryptoCard authentication.\r\n");
3376 logevent("Received CryptoCard challenge");
3377 if (challengelen > sizeof(s->prompt) - 1)
3378 challengelen = sizeof(s->prompt) - 1;/* prevent overrun */
3379 memcpy(s->prompt, challenge, challengelen);
3380 strncpy(s->prompt + challengelen,
3381 memchr(s->prompt, '\n', challengelen) ?
3382 "" : "\r\nResponse: ",
3383 sizeof(s->prompt) - challengelen);
3384 s->prompt[sizeof(s->prompt) - 1] = '\0';
3387 if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
3388 sprintf(s->prompt, "%.90s@%.90s's password: ",
3389 s->username, ssh->savedhost);
3391 if (s->pwpkt_type == SSH1_CMSG_AUTH_RSA) {
3392 char *comment = NULL;
3394 if (flags & FLAG_VERBOSE)
3395 c_write_str(ssh, "Trying public key authentication.\r\n");
3396 logeventf(ssh, "Trying public key \"%s\"",
3397 filename_to_str(&ssh->cfg.keyfile));
3398 type = key_type(&ssh->cfg.keyfile);
3399 if (type != SSH_KEYTYPE_SSH1) {
3400 char *msg = dupprintf("Key is of wrong type (%s)",
3401 key_type_to_str(type));
3403 c_write_str(ssh, msg);
3404 c_write_str(ssh, "\r\n");
3406 s->tried_publickey = 1;
3409 if (!rsakey_encrypted(&ssh->cfg.keyfile, &comment)) {
3410 if (flags & FLAG_VERBOSE)
3411 c_write_str(ssh, "No passphrase required.\r\n");
3414 sprintf(s->prompt, "Passphrase for key \"%.100s\": ", comment);
3419 * Show password prompt, having first obtained it via a TIS
3420 * or CryptoCard exchange if we're doing TIS or CryptoCard
3424 if (!ssh_get_line(s->prompt, s->password,
3425 sizeof(s->password), TRUE)) {
3427 * get_line failed to get a password (for example
3428 * because one was supplied on the command line
3429 * which has already failed to work). Terminate.
3431 send_packet(ssh, SSH1_MSG_DISCONNECT,
3432 PKT_STR, "No more passwords available to try",
3434 logevent("Unable to authenticate");
3435 connection_fatal(ssh->frontend, "Unable to authenticate");
3436 ssh->close_expected = TRUE;
3437 ssh_closing((Plug)ssh, NULL, 0, 0);
3441 /* Prompt may have come from server. We've munged it a bit, so
3442 * we know it to be zero-terminated at least once. */
3443 int ret; /* need not be saved over crReturn */
3444 c_write_untrusted(ssh, s->prompt, strlen(s->prompt));
3447 setup_userpass_input(ssh, s->password, sizeof(s->password), 0);
3449 crWaitUntil(!pktin);
3450 ret = process_userpass_input(ssh, in, inlen);
3454 c_write_str(ssh, "\r\n");
3458 if (s->pwpkt_type == SSH1_CMSG_AUTH_RSA) {
3460 * Try public key authentication with the specified
3463 s->tried_publickey = 1;
3466 const char *error = NULL;
3467 int ret = loadrsakey(&ssh->cfg.keyfile, &s->key, s->password,
3470 c_write_str(ssh, "Couldn't load private key from ");
3471 c_write_str(ssh, filename_to_str(&ssh->cfg.keyfile));
3472 c_write_str(ssh, " (");
3473 c_write_str(ssh, error);
3474 c_write_str(ssh, ").\r\n");
3475 continue; /* go and try password */
3478 c_write_str(ssh, "Wrong passphrase.\r\n");
3479 s->tried_publickey = 0;
3480 continue; /* try again */
3485 * Send a public key attempt.
3487 send_packet(ssh, SSH1_CMSG_AUTH_RSA,
3488 PKT_BIGNUM, s->key.modulus, PKT_END);
3491 if (pktin->type == SSH1_SMSG_FAILURE) {
3492 c_write_str(ssh, "Server refused our public key.\r\n");
3493 continue; /* go and try password */
3495 if (pktin->type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
3496 bombout(("Bizarre response to offer of public key"));
3502 unsigned char buffer[32];
3503 Bignum challenge, response;
3505 if ((challenge = ssh1_pkt_getmp(pktin)) == NULL) {
3506 bombout(("Server's RSA challenge was badly formatted"));
3509 response = rsadecrypt(challenge, &s->key);
3510 freebn(s->key.private_exponent);/* burn the evidence */
3512 for (i = 0; i < 32; i++) {
3513 buffer[i] = bignum_byte(response, 31 - i);
3517 MD5Update(&md5c, buffer, 32);
3518 MD5Update(&md5c, s->session_id, 16);
3519 MD5Final(buffer, &md5c);
3521 send_packet(ssh, SSH1_CMSG_AUTH_RSA_RESPONSE,
3522 PKT_DATA, buffer, 16, PKT_END);
3529 if (pktin->type == SSH1_SMSG_FAILURE) {
3530 if (flags & FLAG_VERBOSE)
3531 c_write_str(ssh, "Failed to authenticate with"
3532 " our public key.\r\n");
3533 continue; /* go and try password */
3534 } else if (pktin->type != SSH1_SMSG_SUCCESS) {
3535 bombout(("Bizarre response to RSA authentication response"));
3539 break; /* we're through! */
3541 if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
3543 * Defence against traffic analysis: we send a
3544 * whole bunch of packets containing strings of
3545 * different lengths. One of these strings is the
3546 * password, in a SSH1_CMSG_AUTH_PASSWORD packet.
3547 * The others are all random data in
3548 * SSH1_MSG_IGNORE packets. This way a passive
3549 * listener can't tell which is the password, and
3550 * hence can't deduce the password length.
3552 * Anybody with a password length greater than 16
3553 * bytes is going to have enough entropy in their
3554 * password that a listener won't find it _that_
3555 * much help to know how long it is. So what we'll
3558 * - if password length < 16, we send 15 packets
3559 * containing string lengths 1 through 15
3561 * - otherwise, we let N be the nearest multiple
3562 * of 8 below the password length, and send 8
3563 * packets containing string lengths N through
3564 * N+7. This won't obscure the order of
3565 * magnitude of the password length, but it will
3566 * introduce a bit of extra uncertainty.
3568 * A few servers (the old 1.2.18 through 1.2.22)
3569 * can't deal with SSH1_MSG_IGNORE. For these
3570 * servers, we need an alternative defence. We make
3571 * use of the fact that the password is interpreted
3572 * as a C string: so we can append a NUL, then some
3575 * One server (a Cisco one) can deal with neither
3576 * SSH1_MSG_IGNORE _nor_ a padded password string.
3577 * For this server we are left with no defences
3578 * against password length sniffing.
3580 if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE)) {
3582 * The server can deal with SSH1_MSG_IGNORE, so
3583 * we can use the primary defence.
3585 int bottom, top, pwlen, i;
3588 pwlen = strlen(s->password);
3590 bottom = 0; /* zero length passwords are OK! :-) */
3593 bottom = pwlen & ~7;
3597 assert(pwlen >= bottom && pwlen <= top);
3599 randomstr = snewn(top + 1, char);
3601 for (i = bottom; i <= top; i++) {
3603 defer_packet(ssh, s->pwpkt_type,
3604 PKTT_PASSWORD, PKT_STR, s->password,
3605 PKTT_OTHER, PKT_END);
3607 for (j = 0; j < i; j++) {
3609 randomstr[j] = random_byte();
3610 } while (randomstr[j] == '\0');
3612 randomstr[i] = '\0';
3613 defer_packet(ssh, SSH1_MSG_IGNORE,
3614 PKT_STR, randomstr, PKT_END);
3617 logevent("Sending password with camouflage packets");
3618 ssh_pkt_defersend(ssh);
3621 else if (!(ssh->remote_bugs & BUG_NEEDS_SSH1_PLAIN_PASSWORD)) {
3623 * The server can't deal with SSH1_MSG_IGNORE
3624 * but can deal with padded passwords, so we
3625 * can use the secondary defence.
3631 len = strlen(s->password);
3632 if (len < sizeof(string)) {
3634 strcpy(string, s->password);
3635 len++; /* cover the zero byte */
3636 while (len < sizeof(string)) {
3637 string[len++] = (char) random_byte();
3642 logevent("Sending length-padded password");
3643 send_packet(ssh, s->pwpkt_type, PKTT_PASSWORD,
3644 PKT_INT, len, PKT_DATA, ss, len,
3645 PKTT_OTHER, PKT_END);
3648 * The server has _both_
3649 * BUG_CHOKES_ON_SSH1_IGNORE and
3650 * BUG_NEEDS_SSH1_PLAIN_PASSWORD. There is
3651 * therefore nothing we can do.
3654 len = strlen(s->password);
3655 logevent("Sending unpadded password");
3656 send_packet(ssh, s->pwpkt_type,
3657 PKTT_PASSWORD, PKT_INT, len,
3658 PKT_DATA, s->password, len,
3659 PKTT_OTHER, PKT_END);
3662 send_packet(ssh, s->pwpkt_type, PKTT_PASSWORD,
3663 PKT_STR, s->password, PKTT_OTHER, PKT_END);
3666 logevent("Sent password");
3667 memset(s->password, 0, strlen(s->password));
3669 if (pktin->type == SSH1_SMSG_FAILURE) {
3670 if (flags & FLAG_VERBOSE)
3671 c_write_str(ssh, "Access denied\r\n");
3672 logevent("Authentication refused");
3673 } else if (pktin->type != SSH1_SMSG_SUCCESS) {
3674 bombout(("Strange packet received, type %d", pktin->type));
3679 logevent("Authentication successful");
3684 void sshfwd_close(struct ssh_channel *c)
3688 if (ssh->state == SSH_STATE_CLOSED)
3691 if (c && !c->closes) {
3693 * If halfopen is true, we have sent
3694 * CHANNEL_OPEN for this channel, but it hasn't even been
3695 * acknowledged by the server. So we must set a close flag
3696 * on it now, and then when the server acks the channel
3697 * open, we can close it then.
3700 if (ssh->version == 1) {
3701 send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE, PKT_INT, c->remoteid,
3704 struct Packet *pktout;
3705 pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
3706 ssh2_pkt_adduint32(pktout, c->remoteid);
3707 ssh2_pkt_send(ssh, pktout);
3710 c->closes = 1; /* sent MSG_CLOSE */
3711 if (c->type == CHAN_X11) {
3713 logevent("Forwarded X11 connection terminated");
3714 } else if (c->type == CHAN_SOCKDATA ||
3715 c->type == CHAN_SOCKDATA_DORMANT) {
3717 logevent("Forwarded port closed");
3722 int sshfwd_write(struct ssh_channel *c, char *buf, int len)
3726 if (ssh->state == SSH_STATE_CLOSED)
3729 if (ssh->version == 1) {
3730 send_packet(ssh, SSH1_MSG_CHANNEL_DATA,
3731 PKT_INT, c->remoteid,
3733 PKT_INT, len, PKT_DATA, buf, len,
3734 PKTT_OTHER, PKT_END);
3736 * In SSH-1 we can return 0 here - implying that forwarded
3737 * connections are never individually throttled - because
3738 * the only circumstance that can cause throttling will be
3739 * the whole SSH connection backing up, in which case
3740 * _everything_ will be throttled as a whole.
3744 ssh2_add_channel_data(c, buf, len);
3745 return ssh2_try_send(c);
3749 void sshfwd_unthrottle(struct ssh_channel *c, int bufsize)
3753 if (ssh->state == SSH_STATE_CLOSED)
3756 if (ssh->version == 1) {
3757 if (c->v.v1.throttling && bufsize < SSH1_BUFFER_LIMIT) {
3758 c->v.v1.throttling = 0;
3759 ssh1_throttle(ssh, -1);
3762 ssh2_set_window(c, OUR_V2_WINSIZE - bufsize);
3766 static void ssh_queueing_handler(Ssh ssh, struct Packet *pktin)
3768 struct queued_handler *qh = ssh->qhead;
3772 assert(pktin->type == qh->msg1 || pktin->type == qh->msg2);
3775 assert(ssh->packet_dispatch[qh->msg1] == ssh_queueing_handler);
3776 ssh->packet_dispatch[qh->msg1] = NULL;
3779 assert(ssh->packet_dispatch[qh->msg2] == ssh_queueing_handler);
3780 ssh->packet_dispatch[qh->msg2] = NULL;
3784 ssh->qhead = qh->next;
3786 if (ssh->qhead->msg1 > 0) {
3787 assert(ssh->packet_dispatch[ssh->qhead->msg1] == NULL);
3788 ssh->packet_dispatch[ssh->qhead->msg1] = ssh_queueing_handler;
3790 if (ssh->qhead->msg2 > 0) {
3791 assert(ssh->packet_dispatch[ssh->qhead->msg2] == NULL);
3792 ssh->packet_dispatch[ssh->qhead->msg2] = ssh_queueing_handler;
3795 ssh->qhead = ssh->qtail = NULL;
3796 ssh->packet_dispatch[pktin->type] = NULL;
3799 qh->handler(ssh, pktin, qh->ctx);
3804 static void ssh_queue_handler(Ssh ssh, int msg1, int msg2,
3805 chandler_fn_t handler, void *ctx)
3807 struct queued_handler *qh;
3809 qh = snew(struct queued_handler);
3812 qh->handler = handler;
3816 if (ssh->qtail == NULL) {
3820 assert(ssh->packet_dispatch[qh->msg1] == NULL);
3821 ssh->packet_dispatch[qh->msg1] = ssh_queueing_handler;
3824 assert(ssh->packet_dispatch[qh->msg2] == NULL);
3825 ssh->packet_dispatch[qh->msg2] = ssh_queueing_handler;
3828 ssh->qtail->next = qh;
3833 static void ssh_rportfwd_succfail(Ssh ssh, struct Packet *pktin, void *ctx)
3835 struct ssh_rportfwd *rpf, *pf = (struct ssh_rportfwd *)ctx;
3837 if (pktin->type == (ssh->version == 1 ? SSH1_SMSG_SUCCESS :
3838 SSH2_MSG_REQUEST_SUCCESS)) {
3839 logeventf(ssh, "Remote port forwarding from %s enabled",
3842 logeventf(ssh, "Remote port forwarding from %s refused",
3845 rpf = del234(ssh->rportfwds, pf);
3851 static void ssh_setup_portfwd(Ssh ssh, const Config *cfg)
3853 const char *portfwd_strptr = cfg->portfwd;
3854 struct ssh_portfwd *epf;
3857 if (!ssh->portfwds) {
3858 ssh->portfwds = newtree234(ssh_portcmp);
3861 * Go through the existing port forwardings and tag them
3862 * with status==DESTROY. Any that we want to keep will be
3863 * re-enabled (status==KEEP) as we go through the
3864 * configuration and find out which bits are the same as
3867 struct ssh_portfwd *epf;
3869 for (i = 0; (epf = index234(ssh->portfwds, i)) != NULL; i++)
3870 epf->status = DESTROY;
3873 while (*portfwd_strptr) {
3874 char address_family, type;
3875 int sport,dport,sserv,dserv;
3876 char sports[256], dports[256], saddr[256], host[256];
3879 address_family = 'A';
3881 if (*portfwd_strptr == 'A' ||
3882 *portfwd_strptr == '4' ||
3883 *portfwd_strptr == '6')
3884 address_family = *portfwd_strptr++;
3885 if (*portfwd_strptr == 'L' ||
3886 *portfwd_strptr == 'R' ||
3887 *portfwd_strptr == 'D')
3888 type = *portfwd_strptr++;
3893 while (*portfwd_strptr && *portfwd_strptr != '\t') {
3894 if (*portfwd_strptr == ':') {
3896 * We've seen a colon in the middle of the
3897 * source port number. This means that
3898 * everything we've seen until now is the
3899 * source _address_, so we'll move it into
3900 * saddr and start sports from the beginning
3905 if (ssh->version == 1 && type == 'R') {
3906 logeventf(ssh, "SSH-1 cannot handle remote source address "
3907 "spec \"%s\"; ignoring", sports);
3909 strcpy(saddr, sports);
3912 if (n < lenof(sports)-1) sports[n++] = *portfwd_strptr++;
3916 if (*portfwd_strptr == '\t')
3919 while (*portfwd_strptr && *portfwd_strptr != ':') {
3920 if (n < lenof(host)-1) host[n++] = *portfwd_strptr++;
3923 if (*portfwd_strptr == ':')
3926 while (*portfwd_strptr) {
3927 if (n < lenof(dports)-1) dports[n++] = *portfwd_strptr++;
3931 dport = atoi(dports);
3935 dport = net_service_lookup(dports);
3937 logeventf(ssh, "Service lookup failed for destination"
3938 " port \"%s\"", dports);
3942 while (*portfwd_strptr) portfwd_strptr++;
3946 portfwd_strptr++; /* eat the NUL and move to next one */
3948 sport = atoi(sports);
3952 sport = net_service_lookup(sports);
3954 logeventf(ssh, "Service lookup failed for source"
3955 " port \"%s\"", sports);
3958 if (sport && dport) {
3959 /* Set up a description of the source port. */
3960 struct ssh_portfwd *pfrec, *epfrec;
3962 pfrec = snew(struct ssh_portfwd);
3964 pfrec->saddr = *saddr ? dupstr(saddr) : NULL;
3965 pfrec->sserv = sserv ? dupstr(sports) : NULL;
3966 pfrec->sport = sport;
3967 pfrec->daddr = *host ? dupstr(host) : NULL;
3968 pfrec->dserv = dserv ? dupstr(dports) : NULL;
3969 pfrec->dport = dport;
3970 pfrec->local = NULL;
3971 pfrec->remote = NULL;
3972 pfrec->addressfamily = (address_family == '4' ? ADDRTYPE_IPV4 :
3973 address_family == '6' ? ADDRTYPE_IPV6 :
3976 epfrec = add234(ssh->portfwds, pfrec);
3977 if (epfrec != pfrec) {
3979 * We already have a port forwarding with precisely
3980 * these parameters. Hence, no need to do anything;
3981 * simply tag the existing one as KEEP.
3983 epfrec->status = KEEP;
3984 free_portfwd(pfrec);
3986 pfrec->status = CREATE;
3992 * Now go through and destroy any port forwardings which were
3995 for (i = 0; (epf = index234(ssh->portfwds, i)) != NULL; i++)
3996 if (epf->status == DESTROY) {
3999 message = dupprintf("%s port forwarding from %s%s%d",
4000 epf->type == 'L' ? "local" :
4001 epf->type == 'R' ? "remote" : "dynamic",
4002 epf->saddr ? epf->saddr : "",
4003 epf->saddr ? ":" : "",
4006 if (epf->type != 'D') {
4007 char *msg2 = dupprintf("%s to %s:%d", message,
4008 epf->daddr, epf->dport);
4013 logeventf(ssh, "Cancelling %s", message);
4017 struct ssh_rportfwd *rpf = epf->remote;
4018 struct Packet *pktout;
4021 * Cancel the port forwarding at the server
4024 if (ssh->version == 1) {
4026 * We cannot cancel listening ports on the
4027 * server side in SSH-1! There's no message
4028 * to support it. Instead, we simply remove
4029 * the rportfwd record from the local end
4030 * so that any connections the server tries
4031 * to make on it are rejected.
4034 pktout = ssh2_pkt_init(SSH2_MSG_GLOBAL_REQUEST);
4035 ssh2_pkt_addstring(pktout, "cancel-tcpip-forward");
4036 ssh2_pkt_addbool(pktout, 0);/* _don't_ want reply */
4038 ssh2_pkt_addstring(pktout, epf->saddr);
4039 } else if (ssh->cfg.rport_acceptall) {
4040 /* XXX: ssh->cfg.rport_acceptall may not represent
4041 * what was used to open the original connection,
4042 * since it's reconfigurable. */
4043 ssh2_pkt_addstring(pktout, "0.0.0.0");
4045 ssh2_pkt_addstring(pktout, "127.0.0.1");
4047 ssh2_pkt_adduint32(pktout, epf->sport);
4048 ssh2_pkt_send(ssh, pktout);
4051 del234(ssh->rportfwds, rpf);
4053 } else if (epf->local) {
4054 pfd_terminate(epf->local);
4057 delpos234(ssh->portfwds, i);
4059 i--; /* so we don't skip one in the list */
4063 * And finally, set up any new port forwardings (status==CREATE).
4065 for (i = 0; (epf = index234(ssh->portfwds, i)) != NULL; i++)
4066 if (epf->status == CREATE) {
4067 char *sportdesc, *dportdesc;
4068 sportdesc = dupprintf("%s%s%s%s%d%s",
4069 epf->saddr ? epf->saddr : "",
4070 epf->saddr ? ":" : "",
4071 epf->sserv ? epf->sserv : "",
4072 epf->sserv ? "(" : "",
4074 epf->sserv ? ")" : "");
4075 if (epf->type == 'D') {
4078 dportdesc = dupprintf("%s:%s%s%d%s",
4080 epf->dserv ? epf->dserv : "",
4081 epf->dserv ? "(" : "",
4083 epf->dserv ? ")" : "");
4086 if (epf->type == 'L') {
4087 const char *err = pfd_addforward(epf->daddr, epf->dport,
4088 epf->saddr, epf->sport,
4091 epf->addressfamily);
4093 logeventf(ssh, "Local %sport %s forwarding to %s%s%s",
4094 epf->addressfamily == ADDRTYPE_IPV4 ? "IPv4 " :
4095 epf->addressfamily == ADDRTYPE_IPV6 ? "IPv6 " : "",
4096 sportdesc, dportdesc,
4097 err ? " failed: " : "", err ? err : "");
4098 } else if (epf->type == 'D') {
4099 const char *err = pfd_addforward(NULL, -1,
4100 epf->saddr, epf->sport,
4103 epf->addressfamily);
4105 logeventf(ssh, "Local %sport %s SOCKS dynamic forwarding%s%s",
4106 epf->addressfamily == ADDRTYPE_IPV4 ? "IPv4 " :
4107 epf->addressfamily == ADDRTYPE_IPV6 ? "IPv6 " : "",
4109 err ? " failed: " : "", err ? err : "");
4111 struct ssh_rportfwd *pf;
4114 * Ensure the remote port forwardings tree exists.
4116 if (!ssh->rportfwds) {
4117 if (ssh->version == 1)
4118 ssh->rportfwds = newtree234(ssh_rportcmp_ssh1);
4120 ssh->rportfwds = newtree234(ssh_rportcmp_ssh2);
4123 pf = snew(struct ssh_rportfwd);
4124 strncpy(pf->dhost, epf->daddr, lenof(pf->dhost)-1);
4125 pf->dhost[lenof(pf->dhost)-1] = '\0';
4126 pf->dport = epf->dport;
4127 pf->sport = epf->sport;
4128 if (add234(ssh->rportfwds, pf) != pf) {
4129 logeventf(ssh, "Duplicate remote port forwarding to %s:%d",
4130 epf->daddr, epf->dport);
4133 logeventf(ssh, "Requesting remote port %s"
4134 " forward to %s", sportdesc, dportdesc);
4136 pf->sportdesc = sportdesc;
4141 if (ssh->version == 1) {
4142 send_packet(ssh, SSH1_CMSG_PORT_FORWARD_REQUEST,
4143 PKT_INT, epf->sport,
4144 PKT_STR, epf->daddr,
4145 PKT_INT, epf->dport,
4147 ssh_queue_handler(ssh, SSH1_SMSG_SUCCESS,
4149 ssh_rportfwd_succfail, pf);
4151 struct Packet *pktout;
4152 pktout = ssh2_pkt_init(SSH2_MSG_GLOBAL_REQUEST);
4153 ssh2_pkt_addstring(pktout, "tcpip-forward");
4154 ssh2_pkt_addbool(pktout, 1);/* want reply */
4156 ssh2_pkt_addstring(pktout, epf->saddr);
4157 } else if (cfg->rport_acceptall) {
4158 ssh2_pkt_addstring(pktout, "0.0.0.0");
4160 ssh2_pkt_addstring(pktout, "127.0.0.1");
4162 ssh2_pkt_adduint32(pktout, epf->sport);
4163 ssh2_pkt_send(ssh, pktout);
4165 ssh_queue_handler(ssh, SSH2_MSG_REQUEST_SUCCESS,
4166 SSH2_MSG_REQUEST_FAILURE,
4167 ssh_rportfwd_succfail, pf);
4176 static void ssh1_smsg_stdout_stderr_data(Ssh ssh, struct Packet *pktin)
4179 int stringlen, bufsize;
4181 ssh_pkt_getstring(pktin, &string, &stringlen);
4182 if (string == NULL) {
4183 bombout(("Incoming terminal data packet was badly formed"));
4187 bufsize = from_backend(ssh->frontend, pktin->type == SSH1_SMSG_STDERR_DATA,
4189 if (!ssh->v1_stdout_throttling && bufsize > SSH1_BUFFER_LIMIT) {
4190 ssh->v1_stdout_throttling = 1;
4191 ssh1_throttle(ssh, +1);
4195 static void ssh1_smsg_x11_open(Ssh ssh, struct Packet *pktin)
4197 /* Remote side is trying to open a channel to talk to our
4198 * X-Server. Give them back a local channel number. */
4199 struct ssh_channel *c;
4200 int remoteid = ssh_pkt_getuint32(pktin);
4202 logevent("Received X11 connect request");
4203 /* Refuse if X11 forwarding is disabled. */
4204 if (!ssh->X11_fwd_enabled) {
4205 send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
4206 PKT_INT, remoteid, PKT_END);
4207 logevent("Rejected X11 connect request");
4209 c = snew(struct ssh_channel);
4212 if (x11_init(&c->u.x11.s, ssh->cfg.x11_display, c,
4213 ssh->x11auth, NULL, -1, &ssh->cfg) != NULL) {
4214 logevent("Opening X11 forward connection failed");
4216 send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
4217 PKT_INT, remoteid, PKT_END);
4220 ("Opening X11 forward connection succeeded");
4221 c->remoteid = remoteid;
4222 c->halfopen = FALSE;
4223 c->localid = alloc_channel_id(ssh);
4225 c->v.v1.throttling = 0;
4226 c->type = CHAN_X11; /* identify channel type */
4227 add234(ssh->channels, c);
4228 send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
4229 PKT_INT, c->remoteid, PKT_INT,
4230 c->localid, PKT_END);
4231 logevent("Opened X11 forward channel");
4236 static void ssh1_smsg_agent_open(Ssh ssh, struct Packet *pktin)
4238 /* Remote side is trying to open a channel to talk to our
4239 * agent. Give them back a local channel number. */
4240 struct ssh_channel *c;
4241 int remoteid = ssh_pkt_getuint32(pktin);
4243 /* Refuse if agent forwarding is disabled. */
4244 if (!ssh->agentfwd_enabled) {
4245 send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
4246 PKT_INT, remoteid, PKT_END);
4248 c = snew(struct ssh_channel);
4250 c->remoteid = remoteid;
4251 c->halfopen = FALSE;
4252 c->localid = alloc_channel_id(ssh);
4254 c->v.v1.throttling = 0;
4255 c->type = CHAN_AGENT; /* identify channel type */
4256 c->u.a.lensofar = 0;
4257 add234(ssh->channels, c);
4258 send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
4259 PKT_INT, c->remoteid, PKT_INT, c->localid,
4264 static void ssh1_msg_port_open(Ssh ssh, struct Packet *pktin)
4266 /* Remote side is trying to open a channel to talk to a
4267 * forwarded port. Give them back a local channel number. */
4268 struct ssh_channel *c;
4269 struct ssh_rportfwd pf, *pfp;
4274 c = snew(struct ssh_channel);
4277 remoteid = ssh_pkt_getuint32(pktin);
4278 ssh_pkt_getstring(pktin, &host, &hostsize);
4279 port = ssh_pkt_getuint32(pktin);
4281 if (hostsize >= lenof(pf.dhost))
4282 hostsize = lenof(pf.dhost)-1;
4283 memcpy(pf.dhost, host, hostsize);
4284 pf.dhost[hostsize] = '\0';
4286 pfp = find234(ssh->rportfwds, &pf, NULL);
4289 logeventf(ssh, "Rejected remote port open request for %s:%d",
4291 send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
4292 PKT_INT, remoteid, PKT_END);
4294 logeventf(ssh, "Received remote port open request for %s:%d",
4296 e = pfd_newconnect(&c->u.pfd.s, pf.dhost, port,
4297 c, &ssh->cfg, pfp->pfrec->addressfamily);
4299 logeventf(ssh, "Port open failed: %s", e);
4301 send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
4302 PKT_INT, remoteid, PKT_END);
4304 c->remoteid = remoteid;
4305 c->halfopen = FALSE;
4306 c->localid = alloc_channel_id(ssh);
4308 c->v.v1.throttling = 0;
4309 c->type = CHAN_SOCKDATA; /* identify channel type */
4310 add234(ssh->channels, c);
4311 send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
4312 PKT_INT, c->remoteid, PKT_INT,
4313 c->localid, PKT_END);
4314 logevent("Forwarded port opened successfully");
4319 static void ssh1_msg_channel_open_confirmation(Ssh ssh, struct Packet *pktin)
4321 unsigned int remoteid = ssh_pkt_getuint32(pktin);
4322 unsigned int localid = ssh_pkt_getuint32(pktin);
4323 struct ssh_channel *c;
4325 c = find234(ssh->channels, &remoteid, ssh_channelfind);
4326 if (c && c->type == CHAN_SOCKDATA_DORMANT) {
4327 c->remoteid = localid;
4328 c->halfopen = FALSE;
4329 c->type = CHAN_SOCKDATA;
4330 c->v.v1.throttling = 0;
4331 pfd_confirm(c->u.pfd.s);
4334 if (c && c->closes) {
4336 * We have a pending close on this channel,
4337 * which we decided on before the server acked
4338 * the channel open. So now we know the
4339 * remoteid, we can close it again.
4341 send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE,
4342 PKT_INT, c->remoteid, PKT_END);
4346 static void ssh1_msg_channel_open_failure(Ssh ssh, struct Packet *pktin)
4348 unsigned int remoteid = ssh_pkt_getuint32(pktin);
4349 struct ssh_channel *c;
4351 c = find234(ssh->channels, &remoteid, ssh_channelfind);
4352 if (c && c->type == CHAN_SOCKDATA_DORMANT) {
4353 logevent("Forwarded connection refused by server");
4354 pfd_close(c->u.pfd.s);
4355 del234(ssh->channels, c);
4360 static void ssh1_msg_channel_close(Ssh ssh, struct Packet *pktin)
4362 /* Remote side closes a channel. */
4363 unsigned i = ssh_pkt_getuint32(pktin);
4364 struct ssh_channel *c;
4365 c = find234(ssh->channels, &i, ssh_channelfind);
4366 if (c && !c->halfopen) {
4369 (pktin->type == SSH1_MSG_CHANNEL_CLOSE ? 1 : 2);
4371 if ((c->closes == 0) && (c->type == CHAN_X11)) {
4372 logevent("Forwarded X11 connection terminated");
4373 assert(c->u.x11.s != NULL);
4374 x11_close(c->u.x11.s);
4377 if ((c->closes == 0) && (c->type == CHAN_SOCKDATA)) {
4378 logevent("Forwarded port closed");
4379 assert(c->u.pfd.s != NULL);
4380 pfd_close(c->u.pfd.s);
4384 c->closes |= (closetype << 2); /* seen this message */
4385 if (!(c->closes & closetype)) {
4386 send_packet(ssh, pktin->type, PKT_INT, c->remoteid,
4388 c->closes |= closetype; /* sent it too */
4391 if (c->closes == 15) {
4392 del234(ssh->channels, c);
4396 bombout(("Received CHANNEL_CLOSE%s for %s channel %d\n",
4397 pktin->type == SSH1_MSG_CHANNEL_CLOSE ? "" :
4398 "_CONFIRMATION", c ? "half-open" : "nonexistent",
4403 static void ssh1_msg_channel_data(Ssh ssh, struct Packet *pktin)
4405 /* Data sent down one of our channels. */
4406 int i = ssh_pkt_getuint32(pktin);
4409 struct ssh_channel *c;
4411 ssh_pkt_getstring(pktin, &p, &len);
4413 c = find234(ssh->channels, &i, ssh_channelfind);
4418 bufsize = x11_send(c->u.x11.s, p, len);
4421 bufsize = pfd_send(c->u.pfd.s, p, len);
4424 /* Data for an agent message. Buffer it. */
4426 if (c->u.a.lensofar < 4) {
4427 unsigned int l = min(4 - c->u.a.lensofar, len);
4428 memcpy(c->u.a.msglen + c->u.a.lensofar, p,
4432 c->u.a.lensofar += l;
4434 if (c->u.a.lensofar == 4) {
4436 4 + GET_32BIT(c->u.a.msglen);
4437 c->u.a.message = snewn(c->u.a.totallen,
4439 memcpy(c->u.a.message, c->u.a.msglen, 4);
4441 if (c->u.a.lensofar >= 4 && len > 0) {
4443 min(c->u.a.totallen - c->u.a.lensofar,
4445 memcpy(c->u.a.message + c->u.a.lensofar, p,
4449 c->u.a.lensofar += l;
4451 if (c->u.a.lensofar == c->u.a.totallen) {
4454 if (agent_query(c->u.a.message,
4457 ssh_agentf_callback, c))
4458 ssh_agentf_callback(c, reply, replylen);
4459 sfree(c->u.a.message);
4460 c->u.a.lensofar = 0;
4463 bufsize = 0; /* agent channels never back up */
4466 if (!c->v.v1.throttling && bufsize > SSH1_BUFFER_LIMIT) {
4467 c->v.v1.throttling = 1;
4468 ssh1_throttle(ssh, +1);
4473 static void ssh1_smsg_exit_status(Ssh ssh, struct Packet *pktin)
4475 ssh->exitcode = ssh_pkt_getuint32(pktin);
4476 logeventf(ssh, "Server sent command exit status %d", ssh->exitcode);
4477 send_packet(ssh, SSH1_CMSG_EXIT_CONFIRMATION, PKT_END);
4479 * In case `helpful' firewalls or proxies tack
4480 * extra human-readable text on the end of the
4481 * session which we might mistake for another
4482 * encrypted packet, we close the session once
4483 * we've sent EXIT_CONFIRMATION.
4485 ssh->close_expected = TRUE;
4486 ssh_closing((Plug)ssh, NULL, 0, 0);
4489 static void do_ssh1_connection(Ssh ssh, unsigned char *in, int inlen,
4490 struct Packet *pktin)
4492 crBegin(ssh->do_ssh1_connection_crstate);
4494 ssh->packet_dispatch[SSH1_SMSG_STDOUT_DATA] =
4495 ssh->packet_dispatch[SSH1_SMSG_STDERR_DATA] =
4496 ssh1_smsg_stdout_stderr_data;
4498 ssh->packet_dispatch[SSH1_MSG_CHANNEL_OPEN_CONFIRMATION] =
4499 ssh1_msg_channel_open_confirmation;
4500 ssh->packet_dispatch[SSH1_MSG_CHANNEL_OPEN_FAILURE] =
4501 ssh1_msg_channel_open_failure;
4502 ssh->packet_dispatch[SSH1_MSG_CHANNEL_CLOSE] =
4503 ssh->packet_dispatch[SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION] =
4504 ssh1_msg_channel_close;
4505 ssh->packet_dispatch[SSH1_MSG_CHANNEL_DATA] = ssh1_msg_channel_data;
4506 ssh->packet_dispatch[SSH1_SMSG_EXIT_STATUS] = ssh1_smsg_exit_status;
4508 if (ssh->cfg.agentfwd && agent_exists()) {
4509 logevent("Requesting agent forwarding");
4510 send_packet(ssh, SSH1_CMSG_AGENT_REQUEST_FORWARDING, PKT_END);
4514 if (pktin->type != SSH1_SMSG_SUCCESS
4515 && pktin->type != SSH1_SMSG_FAILURE) {
4516 bombout(("Protocol confusion"));
4518 } else if (pktin->type == SSH1_SMSG_FAILURE) {
4519 logevent("Agent forwarding refused");
4521 logevent("Agent forwarding enabled");
4522 ssh->agentfwd_enabled = TRUE;
4523 ssh->packet_dispatch[SSH1_SMSG_AGENT_OPEN] = ssh1_smsg_agent_open;
4527 if (ssh->cfg.x11_forward) {
4528 char proto[20], data[64];
4529 logevent("Requesting X11 forwarding");
4530 ssh->x11auth = x11_invent_auth(proto, sizeof(proto),
4531 data, sizeof(data), ssh->cfg.x11_auth);
4532 x11_get_real_auth(ssh->x11auth, ssh->cfg.x11_display);
4533 if (ssh->v1_local_protoflags & SSH1_PROTOFLAG_SCREEN_NUMBER) {
4534 send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
4535 PKT_STR, proto, PKT_STR, data,
4536 PKT_INT, x11_get_screen_number(ssh->cfg.x11_display),
4539 send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
4540 PKT_STR, proto, PKT_STR, data, PKT_END);
4545 if (pktin->type != SSH1_SMSG_SUCCESS
4546 && pktin->type != SSH1_SMSG_FAILURE) {
4547 bombout(("Protocol confusion"));
4549 } else if (pktin->type == SSH1_SMSG_FAILURE) {
4550 logevent("X11 forwarding refused");
4552 logevent("X11 forwarding enabled");
4553 ssh->X11_fwd_enabled = TRUE;
4554 ssh->packet_dispatch[SSH1_SMSG_X11_OPEN] = ssh1_smsg_x11_open;
4558 ssh_setup_portfwd(ssh, &ssh->cfg);
4559 ssh->packet_dispatch[SSH1_MSG_PORT_OPEN] = ssh1_msg_port_open;
4561 if (!ssh->cfg.nopty) {
4562 /* Unpick the terminal-speed string. */
4563 /* XXX perhaps we should allow no speeds to be sent. */
4564 ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
4565 sscanf(ssh->cfg.termspeed, "%d,%d", &ssh->ospeed, &ssh->ispeed);
4566 /* Send the pty request. */
4567 send_packet(ssh, SSH1_CMSG_REQUEST_PTY,
4568 PKT_STR, ssh->cfg.termtype,
4569 PKT_INT, ssh->term_height,
4570 PKT_INT, ssh->term_width,
4571 PKT_INT, 0, PKT_INT, 0, /* width,height in pixels */
4572 PKT_CHAR, 192, PKT_INT, ssh->ispeed, /* TTY_OP_ISPEED */
4573 PKT_CHAR, 193, PKT_INT, ssh->ospeed, /* TTY_OP_OSPEED */
4574 PKT_CHAR, 0, PKT_END);
4575 ssh->state = SSH_STATE_INTERMED;
4579 if (pktin->type != SSH1_SMSG_SUCCESS
4580 && pktin->type != SSH1_SMSG_FAILURE) {
4581 bombout(("Protocol confusion"));
4583 } else if (pktin->type == SSH1_SMSG_FAILURE) {
4584 c_write_str(ssh, "Server refused to allocate pty\r\n");
4585 ssh->editing = ssh->echoing = 1;
4587 logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
4588 ssh->ospeed, ssh->ispeed);
4590 ssh->editing = ssh->echoing = 1;
4593 if (ssh->cfg.compression) {
4594 send_packet(ssh, SSH1_CMSG_REQUEST_COMPRESSION, PKT_INT, 6, PKT_END);
4598 if (pktin->type != SSH1_SMSG_SUCCESS
4599 && pktin->type != SSH1_SMSG_FAILURE) {
4600 bombout(("Protocol confusion"));
4602 } else if (pktin->type == SSH1_SMSG_FAILURE) {
4603 c_write_str(ssh, "Server refused to compress\r\n");
4605 logevent("Started compression");
4606 ssh->v1_compressing = TRUE;
4607 ssh->cs_comp_ctx = zlib_compress_init();
4608 logevent("Initialised zlib (RFC1950) compression");
4609 ssh->sc_comp_ctx = zlib_decompress_init();
4610 logevent("Initialised zlib (RFC1950) decompression");
4614 * Start the shell or command.
4616 * Special case: if the first-choice command is an SSH-2
4617 * subsystem (hence not usable here) and the second choice
4618 * exists, we fall straight back to that.
4621 char *cmd = ssh->cfg.remote_cmd_ptr;
4623 if (!cmd) cmd = ssh->cfg.remote_cmd;
4625 if (ssh->cfg.ssh_subsys && ssh->cfg.remote_cmd_ptr2) {
4626 cmd = ssh->cfg.remote_cmd_ptr2;
4627 ssh->fallback_cmd = TRUE;
4630 send_packet(ssh, SSH1_CMSG_EXEC_CMD, PKT_STR, cmd, PKT_END);
4632 send_packet(ssh, SSH1_CMSG_EXEC_SHELL, PKT_END);
4633 logevent("Started session");
4636 ssh->state = SSH_STATE_SESSION;
4637 if (ssh->size_needed)
4638 ssh_size(ssh, ssh->term_width, ssh->term_height);
4639 if (ssh->eof_needed)
4640 ssh_special(ssh, TS_EOF);
4643 ldisc_send(ssh->ldisc, NULL, 0, 0);/* cause ldisc to notice changes */
4645 ssh->channels = newtree234(ssh_channelcmp);
4649 * By this point, most incoming packets are already being
4650 * handled by the dispatch table, and we need only pay
4651 * attention to the unusual ones.
4656 if (pktin->type == SSH1_SMSG_SUCCESS) {
4657 /* may be from EXEC_SHELL on some servers */
4658 } else if (pktin->type == SSH1_SMSG_FAILURE) {
4659 /* may be from EXEC_SHELL on some servers
4660 * if no pty is available or in other odd cases. Ignore */
4662 bombout(("Strange packet received: type %d", pktin->type));
4667 int len = min(inlen, 512);
4668 send_packet(ssh, SSH1_CMSG_STDIN_DATA, PKTT_DATA,
4669 PKT_INT, len, PKT_DATA, in, len,
4670 PKTT_OTHER, PKT_END);
4681 * Handle the top-level SSH-2 protocol.
4683 static void ssh1_msg_debug(Ssh ssh, struct Packet *pktin)
4688 ssh_pkt_getstring(pktin, &msg, &msglen);
4689 logeventf(ssh, "Remote debug message: %.*s", msglen, msg);
4692 static void ssh1_msg_disconnect(Ssh ssh, struct Packet *pktin)
4694 /* log reason code in disconnect message */
4698 ssh_pkt_getstring(pktin, &msg, &msglen);
4699 bombout(("Server sent disconnect message:\n\"%.*s\"", msglen, msg));
4702 static void ssh_msg_ignore(Ssh ssh, struct Packet *pktin)
4704 /* Do nothing, because we're ignoring it! Duhh. */
4707 static void ssh1_protocol_setup(Ssh ssh)
4712 * Most messages are handled by the coroutines.
4714 for (i = 0; i < 256; i++)
4715 ssh->packet_dispatch[i] = NULL;
4718 * These special message types we install handlers for.
4720 ssh->packet_dispatch[SSH1_MSG_DISCONNECT] = ssh1_msg_disconnect;
4721 ssh->packet_dispatch[SSH1_MSG_IGNORE] = ssh_msg_ignore;
4722 ssh->packet_dispatch[SSH1_MSG_DEBUG] = ssh1_msg_debug;
4725 static void ssh1_protocol(Ssh ssh, void *vin, int inlen,
4726 struct Packet *pktin)
4728 unsigned char *in=(unsigned char*)vin;
4729 if (ssh->state == SSH_STATE_CLOSED)
4732 if (pktin && ssh->packet_dispatch[pktin->type]) {
4733 ssh->packet_dispatch[pktin->type](ssh, pktin);
4737 if (!ssh->protocol_initial_phase_done) {
4738 if (do_ssh1_login(ssh, in, inlen, pktin))
4739 ssh->protocol_initial_phase_done = TRUE;
4744 do_ssh1_connection(ssh, in, inlen, pktin);
4748 * Utility routine for decoding comma-separated strings in KEXINIT.
4750 static int in_commasep_string(char *needle, char *haystack, int haylen)
4753 if (!needle || !haystack) /* protect against null pointers */
4755 needlen = strlen(needle);
4758 * Is it at the start of the string?
4760 if (haylen >= needlen && /* haystack is long enough */
4761 !memcmp(needle, haystack, needlen) && /* initial match */
4762 (haylen == needlen || haystack[needlen] == ',')
4763 /* either , or EOS follows */
4767 * If not, search for the next comma and resume after that.
4768 * If no comma found, terminate.
4770 while (haylen > 0 && *haystack != ',')
4771 haylen--, haystack++;
4774 haylen--, haystack++; /* skip over comma itself */
4779 * Similar routine for checking whether we have the first string in a list.
4781 static int first_in_commasep_string(char *needle, char *haystack, int haylen)
4784 if (!needle || !haystack) /* protect against null pointers */
4786 needlen = strlen(needle);
4788 * Is it at the start of the string?
4790 if (haylen >= needlen && /* haystack is long enough */
4791 !memcmp(needle, haystack, needlen) && /* initial match */
4792 (haylen == needlen || haystack[needlen] == ',')
4793 /* either , or EOS follows */
4801 * SSH-2 key creation method.
4803 static void ssh2_mkkey(Ssh ssh, Bignum K, unsigned char *H,
4804 unsigned char *sessid, char chr,
4805 unsigned char *keyspace)
4808 /* First 20 bytes. */
4810 if (!(ssh->remote_bugs & BUG_SSH2_DERIVEKEY))
4812 SHA_Bytes(&s, H, 20);
4813 SHA_Bytes(&s, &chr, 1);
4814 SHA_Bytes(&s, sessid, 20);
4815 SHA_Final(&s, keyspace);
4816 /* Next 20 bytes. */
4818 if (!(ssh->remote_bugs & BUG_SSH2_DERIVEKEY))
4820 SHA_Bytes(&s, H, 20);
4821 SHA_Bytes(&s, keyspace, 20);
4822 SHA_Final(&s, keyspace + 20);
4826 * Handle the SSH-2 transport layer.
4828 static int do_ssh2_transport(Ssh ssh, void *vin, int inlen,
4829 struct Packet *pktin)
4831 unsigned char *in = (unsigned char *)vin;
4832 struct do_ssh2_transport_state {
4833 int nbits, pbits, warn_kex, warn_cscipher, warn_sccipher;
4834 Bignum p, g, e, f, K;
4835 int kex_init_value, kex_reply_value;
4836 const struct ssh_mac **maclist;
4838 const struct ssh2_cipher *cscipher_tobe;
4839 const struct ssh2_cipher *sccipher_tobe;
4840 const struct ssh_mac *csmac_tobe;
4841 const struct ssh_mac *scmac_tobe;
4842 const struct ssh_compress *cscomp_tobe;
4843 const struct ssh_compress *sccomp_tobe;
4844 char *hostkeydata, *sigdata, *keystr, *fingerprint;
4845 int hostkeylen, siglen;
4846 void *hkey; /* actual host key */
4847 unsigned char exchange_hash[20];
4848 int n_preferred_kex;
4849 const struct ssh_kex *preferred_kex[KEX_MAX];
4850 int n_preferred_ciphers;
4851 const struct ssh2_ciphers *preferred_ciphers[CIPHER_MAX];
4852 const struct ssh_compress *preferred_comp;
4853 int got_session_id, activated_authconn;
4854 struct Packet *pktout;
4859 crState(do_ssh2_transport_state);
4861 crBegin(ssh->do_ssh2_transport_crstate);
4863 s->cscipher_tobe = s->sccipher_tobe = NULL;
4864 s->csmac_tobe = s->scmac_tobe = NULL;
4865 s->cscomp_tobe = s->sccomp_tobe = NULL;
4867 s->got_session_id = s->activated_authconn = FALSE;
4870 * Be prepared to work around the buggy MAC problem.
4872 if (ssh->remote_bugs & BUG_SSH2_HMAC)
4873 s->maclist = buggymacs, s->nmacs = lenof(buggymacs);
4875 s->maclist = macs, s->nmacs = lenof(macs);
4878 ssh->pkt_ctx &= ~SSH2_PKTCTX_KEX_MASK;
4880 int i, j, commalist_started;
4883 * Set up the preferred key exchange. (NULL => warn below here)
4885 s->n_preferred_kex = 0;
4886 for (i = 0; i < KEX_MAX; i++) {
4887 switch (ssh->cfg.ssh_kexlist[i]) {
4889 s->preferred_kex[s->n_preferred_kex++] =
4890 &ssh_diffiehellman_gex;
4893 s->preferred_kex[s->n_preferred_kex++] =
4894 &ssh_diffiehellman_group14;
4897 s->preferred_kex[s->n_preferred_kex++] =
4898 &ssh_diffiehellman_group1;
4901 /* Flag for later. Don't bother if it's the last in
4903 if (i < KEX_MAX - 1) {
4904 s->preferred_kex[s->n_preferred_kex++] = NULL;
4911 * Set up the preferred ciphers. (NULL => warn below here)
4913 s->n_preferred_ciphers = 0;
4914 for (i = 0; i < CIPHER_MAX; i++) {
4915 switch (ssh->cfg.ssh_cipherlist[i]) {
4916 case CIPHER_BLOWFISH:
4917 s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_blowfish;
4920 if (ssh->cfg.ssh2_des_cbc) {
4921 s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_des;
4925 s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_3des;
4928 s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_aes;
4931 /* Flag for later. Don't bother if it's the last in
4933 if (i < CIPHER_MAX - 1) {
4934 s->preferred_ciphers[s->n_preferred_ciphers++] = NULL;
4941 * Set up preferred compression.
4943 if (ssh->cfg.compression)
4944 s->preferred_comp = &ssh_zlib;
4946 s->preferred_comp = &ssh_comp_none;
4949 * Enable queueing of outgoing auth- or connection-layer
4950 * packets while we are in the middle of a key exchange.
4952 ssh->queueing = TRUE;
4955 * Flag that KEX is in progress.
4957 ssh->kex_in_progress = TRUE;
4960 * Construct and send our key exchange packet.
4962 s->pktout = ssh2_pkt_init(SSH2_MSG_KEXINIT);
4963 for (i = 0; i < 16; i++)
4964 ssh2_pkt_addbyte(s->pktout, (unsigned char) random_byte());
4965 /* List key exchange algorithms. */
4966 ssh2_pkt_addstring_start(s->pktout);
4967 commalist_started = 0;
4968 for (i = 0; i < s->n_preferred_kex; i++) {
4969 const struct ssh_kex *k = s->preferred_kex[i];
4970 if (!k) continue; /* warning flag */
4971 if (commalist_started)
4972 ssh2_pkt_addstring_str(s->pktout, ",");
4973 ssh2_pkt_addstring_str(s->pktout, s->preferred_kex[i]->name);
4974 commalist_started = 1;
4976 /* List server host key algorithms. */
4977 ssh2_pkt_addstring_start(s->pktout);
4978 for (i = 0; i < lenof(hostkey_algs); i++) {
4979 ssh2_pkt_addstring_str(s->pktout, hostkey_algs[i]->name);
4980 if (i < lenof(hostkey_algs) - 1)
4981 ssh2_pkt_addstring_str(s->pktout, ",");
4983 /* List client->server encryption algorithms. */
4984 ssh2_pkt_addstring_start(s->pktout);
4985 commalist_started = 0;
4986 for (i = 0; i < s->n_preferred_ciphers; i++) {
4987 const struct ssh2_ciphers *c = s->preferred_ciphers[i];
4988 if (!c) continue; /* warning flag */
4989 for (j = 0; j < c->nciphers; j++) {
4990 if (commalist_started)
4991 ssh2_pkt_addstring_str(s->pktout, ",");
4992 ssh2_pkt_addstring_str(s->pktout, c->list[j]->name);
4993 commalist_started = 1;
4996 /* List server->client encryption algorithms. */
4997 ssh2_pkt_addstring_start(s->pktout);
4998 commalist_started = 0;
4999 for (i = 0; i < s->n_preferred_ciphers; i++) {
5000 const struct ssh2_ciphers *c = s->preferred_ciphers[i];
5001 if (!c) continue; /* warning flag */
5002 for (j = 0; j < c->nciphers; j++) {
5003 if (commalist_started)
5004 ssh2_pkt_addstring_str(s->pktout, ",");
5005 ssh2_pkt_addstring_str(s->pktout, c->list[j]->name);
5006 commalist_started = 1;
5009 /* List client->server MAC algorithms. */
5010 ssh2_pkt_addstring_start(s->pktout);
5011 for (i = 0; i < s->nmacs; i++) {
5012 ssh2_pkt_addstring_str(s->pktout, s->maclist[i]->name);
5013 if (i < s->nmacs - 1)
5014 ssh2_pkt_addstring_str(s->pktout, ",");
5016 /* List server->client MAC algorithms. */
5017 ssh2_pkt_addstring_start(s->pktout);
5018 for (i = 0; i < s->nmacs; i++) {
5019 ssh2_pkt_addstring_str(s->pktout, s->maclist[i]->name);
5020 if (i < s->nmacs - 1)
5021 ssh2_pkt_addstring_str(s->pktout, ",");
5023 /* List client->server compression algorithms. */
5024 ssh2_pkt_addstring_start(s->pktout);
5025 assert(lenof(compressions) > 1);
5026 ssh2_pkt_addstring_str(s->pktout, s->preferred_comp->name);
5027 for (i = 0; i < lenof(compressions); i++) {
5028 const struct ssh_compress *c = compressions[i];
5029 if (c != s->preferred_comp) {
5030 ssh2_pkt_addstring_str(s->pktout, ",");
5031 ssh2_pkt_addstring_str(s->pktout, c->name);
5034 /* List server->client compression algorithms. */
5035 ssh2_pkt_addstring_start(s->pktout);
5036 assert(lenof(compressions) > 1);
5037 ssh2_pkt_addstring_str(s->pktout, s->preferred_comp->name);
5038 for (i = 0; i < lenof(compressions); i++) {
5039 const struct ssh_compress *c = compressions[i];
5040 if (c != s->preferred_comp) {
5041 ssh2_pkt_addstring_str(s->pktout, ",");
5042 ssh2_pkt_addstring_str(s->pktout, c->name);
5045 /* List client->server languages. Empty list. */
5046 ssh2_pkt_addstring_start(s->pktout);
5047 /* List server->client languages. Empty list. */
5048 ssh2_pkt_addstring_start(s->pktout);
5049 /* First KEX packet does _not_ follow, because we're not that brave. */
5050 ssh2_pkt_addbool(s->pktout, FALSE);
5052 ssh2_pkt_adduint32(s->pktout, 0);
5055 ssh->exhash = ssh->exhashbase;
5056 sha_string(&ssh->exhash, s->pktout->data + 5, s->pktout->length - 5);
5058 ssh2_pkt_send_noqueue(ssh, s->pktout);
5062 if (pktin->length > 5)
5063 sha_string(&ssh->exhash, pktin->data + 5, pktin->length - 5);
5066 * Now examine the other side's KEXINIT to see what we're up
5070 char *str, *preferred;
5073 if (pktin->type != SSH2_MSG_KEXINIT) {
5074 bombout(("expected key exchange packet from server"));
5078 ssh->hostkey = NULL;
5079 s->cscipher_tobe = NULL;
5080 s->sccipher_tobe = NULL;
5081 s->csmac_tobe = NULL;
5082 s->scmac_tobe = NULL;
5083 s->cscomp_tobe = NULL;
5084 s->sccomp_tobe = NULL;
5085 s->warn_kex = s->warn_cscipher = s->warn_sccipher = FALSE;
5087 pktin->savedpos += 16; /* skip garbage cookie */
5088 ssh_pkt_getstring(pktin, &str, &len); /* key exchange algorithms */
5091 for (i = 0; i < s->n_preferred_kex; i++) {
5092 const struct ssh_kex *k = s->preferred_kex[i];
5096 if (!preferred) preferred = k->name;
5097 if (in_commasep_string(k->name, str, len))
5104 bombout(("Couldn't agree a key exchange algorithm (available: %s)",
5105 str ? str : "(null)"));
5109 * Note that the server's guess is considered wrong if it doesn't match
5110 * the first algorithm in our list, even if it's still the algorithm
5113 s->guessok = first_in_commasep_string(preferred, str, len);
5114 ssh_pkt_getstring(pktin, &str, &len); /* host key algorithms */
5115 for (i = 0; i < lenof(hostkey_algs); i++) {
5116 if (in_commasep_string(hostkey_algs[i]->name, str, len)) {
5117 ssh->hostkey = hostkey_algs[i];
5121 s->guessok = s->guessok &&
5122 first_in_commasep_string(hostkey_algs[0]->name, str, len);
5123 ssh_pkt_getstring(pktin, &str, &len); /* client->server cipher */
5124 for (i = 0; i < s->n_preferred_ciphers; i++) {
5125 const struct ssh2_ciphers *c = s->preferred_ciphers[i];
5127 s->warn_cscipher = TRUE;
5129 for (j = 0; j < c->nciphers; j++) {
5130 if (in_commasep_string(c->list[j]->name, str, len)) {
5131 s->cscipher_tobe = c->list[j];
5136 if (s->cscipher_tobe)
5139 if (!s->cscipher_tobe) {
5140 bombout(("Couldn't agree a client-to-server cipher (available: %s)",
5141 str ? str : "(null)"));
5145 ssh_pkt_getstring(pktin, &str, &len); /* server->client cipher */
5146 for (i = 0; i < s->n_preferred_ciphers; i++) {
5147 const struct ssh2_ciphers *c = s->preferred_ciphers[i];
5149 s->warn_sccipher = TRUE;
5151 for (j = 0; j < c->nciphers; j++) {
5152 if (in_commasep_string(c->list[j]->name, str, len)) {
5153 s->sccipher_tobe = c->list[j];
5158 if (s->sccipher_tobe)
5161 if (!s->sccipher_tobe) {
5162 bombout(("Couldn't agree a server-to-client cipher (available: %s)",
5163 str ? str : "(null)"));
5167 ssh_pkt_getstring(pktin, &str, &len); /* client->server mac */
5168 for (i = 0; i < s->nmacs; i++) {
5169 if (in_commasep_string(s->maclist[i]->name, str, len)) {
5170 s->csmac_tobe = s->maclist[i];
5174 ssh_pkt_getstring(pktin, &str, &len); /* server->client mac */
5175 for (i = 0; i < s->nmacs; i++) {
5176 if (in_commasep_string(s->maclist[i]->name, str, len)) {
5177 s->scmac_tobe = s->maclist[i];
5181 ssh_pkt_getstring(pktin, &str, &len); /* client->server compression */
5182 for (i = 0; i < lenof(compressions) + 1; i++) {
5183 const struct ssh_compress *c =
5184 i == 0 ? s->preferred_comp : compressions[i - 1];
5185 if (in_commasep_string(c->name, str, len)) {
5190 ssh_pkt_getstring(pktin, &str, &len); /* server->client compression */
5191 for (i = 0; i < lenof(compressions) + 1; i++) {
5192 const struct ssh_compress *c =
5193 i == 0 ? s->preferred_comp : compressions[i - 1];
5194 if (in_commasep_string(c->name, str, len)) {
5199 ssh_pkt_getstring(pktin, &str, &len); /* client->server language */
5200 ssh_pkt_getstring(pktin, &str, &len); /* server->client language */
5201 s->ignorepkt = ssh2_pkt_getbool(pktin) && !s->guessok;
5204 ssh_set_frozen(ssh, 1);
5205 s->dlgret = askalg(ssh->frontend, "key-exchange algorithm",
5207 ssh_dialog_callback, ssh);
5208 if (s->dlgret < 0) {
5212 bombout(("Unexpected data from server while"
5213 " waiting for user response"));
5216 } while (pktin || inlen > 0);
5217 s->dlgret = ssh->user_response;
5219 ssh_set_frozen(ssh, 0);
5220 if (s->dlgret == 0) {
5221 ssh->close_expected = TRUE;
5222 ssh_closing((Plug)ssh, NULL, 0, 0);
5227 if (s->warn_cscipher) {
5228 ssh_set_frozen(ssh, 1);
5229 s->dlgret = askalg(ssh->frontend,
5230 "client-to-server cipher",
5231 s->cscipher_tobe->name,
5232 ssh_dialog_callback, ssh);
5233 if (s->dlgret < 0) {
5237 bombout(("Unexpected data from server while"
5238 " waiting for user response"));
5241 } while (pktin || inlen > 0);
5242 s->dlgret = ssh->user_response;
5244 ssh_set_frozen(ssh, 0);
5245 if (s->dlgret == 0) {
5246 ssh->close_expected = TRUE;
5247 ssh_closing((Plug)ssh, NULL, 0, 0);
5252 if (s->warn_sccipher) {
5253 ssh_set_frozen(ssh, 1);
5254 s->dlgret = askalg(ssh->frontend,
5255 "server-to-client cipher",
5256 s->sccipher_tobe->name,
5257 ssh_dialog_callback, ssh);
5258 if (s->dlgret < 0) {
5262 bombout(("Unexpected data from server while"
5263 " waiting for user response"));
5266 } while (pktin || inlen > 0);
5267 s->dlgret = ssh->user_response;
5269 ssh_set_frozen(ssh, 0);
5270 if (s->dlgret == 0) {
5271 ssh->close_expected = TRUE;
5272 ssh_closing((Plug)ssh, NULL, 0, 0);
5277 if (s->ignorepkt) /* first_kex_packet_follows */
5278 crWaitUntil(pktin); /* Ignore packet */
5282 * Work out the number of bits of key we will need from the key
5283 * exchange. We start with the maximum key length of either
5289 csbits = s->cscipher_tobe->keylen;
5290 scbits = s->sccipher_tobe->keylen;
5291 s->nbits = (csbits > scbits ? csbits : scbits);
5293 /* The keys only have 160-bit entropy, since they're based on
5294 * a SHA-1 hash. So cap the key size at 160 bits. */
5299 * If we're doing Diffie-Hellman group exchange, start by
5300 * requesting a group.
5302 if (!ssh->kex->pdata) {
5303 logevent("Doing Diffie-Hellman group exchange");
5304 ssh->pkt_ctx |= SSH2_PKTCTX_DHGEX;
5306 * Work out how big a DH group we will need to allow that
5309 s->pbits = 512 << ((s->nbits - 1) / 64);
5310 s->pktout = ssh2_pkt_init(SSH2_MSG_KEX_DH_GEX_REQUEST);
5311 ssh2_pkt_adduint32(s->pktout, s->pbits);
5312 ssh2_pkt_send_noqueue(ssh, s->pktout);
5315 if (pktin->type != SSH2_MSG_KEX_DH_GEX_GROUP) {
5316 bombout(("expected key exchange group packet from server"));
5319 s->p = ssh2_pkt_getmp(pktin);
5320 s->g = ssh2_pkt_getmp(pktin);
5321 if (!s->p || !s->g) {
5322 bombout(("unable to read mp-ints from incoming group packet"));
5325 ssh->kex_ctx = dh_setup_gex(s->p, s->g);
5326 s->kex_init_value = SSH2_MSG_KEX_DH_GEX_INIT;
5327 s->kex_reply_value = SSH2_MSG_KEX_DH_GEX_REPLY;
5329 ssh->pkt_ctx |= SSH2_PKTCTX_DHGROUP;
5330 ssh->kex_ctx = dh_setup_group(ssh->kex);
5331 s->kex_init_value = SSH2_MSG_KEXDH_INIT;
5332 s->kex_reply_value = SSH2_MSG_KEXDH_REPLY;
5333 logeventf(ssh, "Using Diffie-Hellman with standard group \"%s\"",
5334 ssh->kex->groupname);
5337 logevent("Doing Diffie-Hellman key exchange");
5339 * Now generate and send e for Diffie-Hellman.
5341 set_busy_status(ssh->frontend, BUSY_CPU); /* this can take a while */
5342 s->e = dh_create_e(ssh->kex_ctx, s->nbits * 2);
5343 s->pktout = ssh2_pkt_init(s->kex_init_value);
5344 ssh2_pkt_addmp(s->pktout, s->e);
5345 ssh2_pkt_send_noqueue(ssh, s->pktout);
5347 set_busy_status(ssh->frontend, BUSY_WAITING); /* wait for server */
5349 if (pktin->type != s->kex_reply_value) {
5350 bombout(("expected key exchange reply packet from server"));
5353 set_busy_status(ssh->frontend, BUSY_CPU); /* cogitate */
5354 ssh_pkt_getstring(pktin, &s->hostkeydata, &s->hostkeylen);
5355 s->f = ssh2_pkt_getmp(pktin);
5357 bombout(("unable to parse key exchange reply packet"));
5360 ssh_pkt_getstring(pktin, &s->sigdata, &s->siglen);
5362 s->K = dh_find_K(ssh->kex_ctx, s->f);
5364 /* We assume everything from now on will be quick, and it might
5365 * involve user interaction. */
5366 set_busy_status(ssh->frontend, BUSY_NOT);
5368 sha_string(&ssh->exhash, s->hostkeydata, s->hostkeylen);
5369 if (ssh->kex == &ssh_diffiehellman_gex) {
5370 sha_uint32(&ssh->exhash, s->pbits);
5371 sha_mpint(&ssh->exhash, s->p);
5372 sha_mpint(&ssh->exhash, s->g);
5374 sha_mpint(&ssh->exhash, s->e);
5375 sha_mpint(&ssh->exhash, s->f);
5376 sha_mpint(&ssh->exhash, s->K);
5377 SHA_Final(&ssh->exhash, s->exchange_hash);
5379 dh_cleanup(ssh->kex_ctx);
5380 ssh->kex_ctx = NULL;
5383 debug(("Exchange hash is:\n"));
5384 dmemdump(s->exchange_hash, 20);
5387 s->hkey = ssh->hostkey->newkey(s->hostkeydata, s->hostkeylen);
5389 !ssh->hostkey->verifysig(s->hkey, s->sigdata, s->siglen,
5390 (char *)s->exchange_hash, 20)) {
5391 bombout(("Server's host key did not match the signature supplied"));
5396 * Authenticate remote host: verify host key. (We've already
5397 * checked the signature of the exchange hash.)
5399 s->keystr = ssh->hostkey->fmtkey(s->hkey);
5400 s->fingerprint = ssh->hostkey->fingerprint(s->hkey);
5401 ssh_set_frozen(ssh, 1);
5402 s->dlgret = verify_ssh_host_key(ssh->frontend,
5403 ssh->savedhost, ssh->savedport,
5404 ssh->hostkey->keytype, s->keystr,
5406 ssh_dialog_callback, ssh);
5407 if (s->dlgret < 0) {
5411 bombout(("Unexpected data from server while waiting"
5412 " for user host key response"));
5415 } while (pktin || inlen > 0);
5416 s->dlgret = ssh->user_response;
5418 ssh_set_frozen(ssh, 0);
5419 if (s->dlgret == 0) {
5420 ssh->close_expected = TRUE;
5421 ssh_closing((Plug)ssh, NULL, 0, 0);
5424 if (!s->got_session_id) { /* don't bother logging this in rekeys */
5425 logevent("Host key fingerprint is:");
5426 logevent(s->fingerprint);
5428 sfree(s->fingerprint);
5430 ssh->hostkey->freekey(s->hkey);
5433 * The exchange hash from the very first key exchange is also
5434 * the session id, used in session key construction and
5437 if (!s->got_session_id) {
5438 memcpy(ssh->v2_session_id, s->exchange_hash,
5439 sizeof(s->exchange_hash));
5440 s->got_session_id = TRUE;
5444 * Send SSH2_MSG_NEWKEYS.
5446 s->pktout = ssh2_pkt_init(SSH2_MSG_NEWKEYS);
5447 ssh2_pkt_send_noqueue(ssh, s->pktout);
5448 ssh->outgoing_data_size = 0; /* start counting from here */
5451 * We've sent client NEWKEYS, so create and initialise
5452 * client-to-server session keys.
5454 if (ssh->cs_cipher_ctx)
5455 ssh->cscipher->free_context(ssh->cs_cipher_ctx);
5456 ssh->cscipher = s->cscipher_tobe;
5457 ssh->cs_cipher_ctx = ssh->cscipher->make_context();
5459 if (ssh->cs_mac_ctx)
5460 ssh->csmac->free_context(ssh->cs_mac_ctx);
5461 ssh->csmac = s->csmac_tobe;
5462 ssh->cs_mac_ctx = ssh->csmac->make_context();
5464 if (ssh->cs_comp_ctx)
5465 ssh->cscomp->compress_cleanup(ssh->cs_comp_ctx);
5466 ssh->cscomp = s->cscomp_tobe;
5467 ssh->cs_comp_ctx = ssh->cscomp->compress_init();
5470 * Set IVs on client-to-server keys. Here we use the exchange
5471 * hash from the _first_ key exchange.
5474 unsigned char keyspace[40];
5475 ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'C',keyspace);
5476 ssh->cscipher->setkey(ssh->cs_cipher_ctx, keyspace);
5477 ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'A',keyspace);
5478 ssh->cscipher->setiv(ssh->cs_cipher_ctx, keyspace);
5479 ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'E',keyspace);
5480 ssh->csmac->setkey(ssh->cs_mac_ctx, keyspace);
5483 logeventf(ssh, "Initialised %.200s client->server encryption",
5484 ssh->cscipher->text_name);
5485 logeventf(ssh, "Initialised %.200s client->server MAC algorithm",
5486 ssh->csmac->text_name);
5487 if (ssh->cscomp->text_name)
5488 logeventf(ssh, "Initialised %s compression",
5489 ssh->cscomp->text_name);
5492 * Now our end of the key exchange is complete, we can send all
5493 * our queued higher-layer packets.
5495 ssh->queueing = FALSE;
5496 ssh2_pkt_queuesend(ssh);
5499 * Expect SSH2_MSG_NEWKEYS from server.
5502 if (pktin->type != SSH2_MSG_NEWKEYS) {
5503 bombout(("expected new-keys packet from server"));
5506 ssh->incoming_data_size = 0; /* start counting from here */
5509 * We've seen server NEWKEYS, so create and initialise
5510 * server-to-client session keys.
5512 if (ssh->sc_cipher_ctx)
5513 ssh->sccipher->free_context(ssh->sc_cipher_ctx);
5514 ssh->sccipher = s->sccipher_tobe;
5515 ssh->sc_cipher_ctx = ssh->sccipher->make_context();
5517 if (ssh->sc_mac_ctx)
5518 ssh->scmac->free_context(ssh->sc_mac_ctx);
5519 ssh->scmac = s->scmac_tobe;
5520 ssh->sc_mac_ctx = ssh->scmac->make_context();
5522 if (ssh->sc_comp_ctx)
5523 ssh->sccomp->decompress_cleanup(ssh->sc_comp_ctx);
5524 ssh->sccomp = s->sccomp_tobe;
5525 ssh->sc_comp_ctx = ssh->sccomp->decompress_init();
5528 * Set IVs on server-to-client keys. Here we use the exchange
5529 * hash from the _first_ key exchange.
5532 unsigned char keyspace[40];
5533 ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'D',keyspace);
5534 ssh->sccipher->setkey(ssh->sc_cipher_ctx, keyspace);
5535 ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'B',keyspace);
5536 ssh->sccipher->setiv(ssh->sc_cipher_ctx, keyspace);
5537 ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'F',keyspace);
5538 ssh->scmac->setkey(ssh->sc_mac_ctx, keyspace);
5540 logeventf(ssh, "Initialised %.200s server->client encryption",
5541 ssh->sccipher->text_name);
5542 logeventf(ssh, "Initialised %.200s server->client MAC algorithm",
5543 ssh->scmac->text_name);
5544 if (ssh->sccomp->text_name)
5545 logeventf(ssh, "Initialised %s decompression",
5546 ssh->sccomp->text_name);
5549 * Free key exchange data.
5553 if (ssh->kex == &ssh_diffiehellman_gex) {
5559 * Key exchange is over. Loop straight back round if we have a
5560 * deferred rekey reason.
5562 if (ssh->deferred_rekey_reason) {
5563 logevent(ssh->deferred_rekey_reason);
5565 ssh->deferred_rekey_reason = NULL;
5566 goto begin_key_exchange;
5570 * Otherwise, schedule a timer for our next rekey.
5572 ssh->kex_in_progress = FALSE;
5573 ssh->last_rekey = GETTICKCOUNT();
5574 if (ssh->cfg.ssh_rekey_time != 0)
5575 ssh->next_rekey = schedule_timer(ssh->cfg.ssh_rekey_time*60*TICKSPERSEC,
5579 * If this is the first key exchange phase, we must pass the
5580 * SSH2_MSG_NEWKEYS packet to the next layer, not because it
5581 * wants to see it but because it will need time to initialise
5582 * itself before it sees an actual packet. In subsequent key
5583 * exchange phases, we don't pass SSH2_MSG_NEWKEYS on, because
5584 * it would only confuse the layer above.
5586 if (s->activated_authconn) {
5589 s->activated_authconn = TRUE;
5592 * Now we're encrypting. Begin returning 1 to the protocol main
5593 * function so that other things can run on top of the
5594 * transport. If we ever see a KEXINIT, we must go back to the
5597 * We _also_ go back to the start if we see pktin==NULL and
5598 * inlen==-1, because this is a special signal meaning
5599 * `initiate client-driven rekey', and `in' contains a message
5600 * giving the reason for the rekey.
5602 while (!((pktin && pktin->type == SSH2_MSG_KEXINIT) ||
5603 (!pktin && inlen == -1))) {
5608 logevent("Server initiated key re-exchange");
5611 * Special case: if the server bug is set that doesn't
5612 * allow rekeying, we give a different log message and
5613 * continue waiting. (If such a server _initiates_ a rekey,
5614 * we process it anyway!)
5616 if ((ssh->remote_bugs & BUG_SSH2_REKEY)) {
5617 logeventf(ssh, "Server bug prevents key re-exchange (%s)",
5619 /* Reset the counters, so that at least this message doesn't
5620 * hit the event log _too_ often. */
5621 ssh->outgoing_data_size = 0;
5622 ssh->incoming_data_size = 0;
5623 if (ssh->cfg.ssh_rekey_time != 0) {
5625 schedule_timer(ssh->cfg.ssh_rekey_time*60*TICKSPERSEC,
5628 goto wait_for_rekey; /* this is utterly horrid */
5630 logeventf(ssh, "Initiating key re-exchange (%s)", (char *)in);
5633 goto begin_key_exchange;
5639 * Add data to an SSH-2 channel output buffer.
5641 static void ssh2_add_channel_data(struct ssh_channel *c, char *buf,
5644 bufchain_add(&c->v.v2.outbuffer, buf, len);
5648 * Attempt to send data on an SSH-2 channel.
5650 static int ssh2_try_send(struct ssh_channel *c)
5653 struct Packet *pktout;
5655 while (c->v.v2.remwindow > 0 && bufchain_size(&c->v.v2.outbuffer) > 0) {
5658 bufchain_prefix(&c->v.v2.outbuffer, &data, &len);
5659 if ((unsigned)len > c->v.v2.remwindow)
5660 len = c->v.v2.remwindow;
5661 if ((unsigned)len > c->v.v2.remmaxpkt)
5662 len = c->v.v2.remmaxpkt;
5663 pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_DATA);
5664 ssh2_pkt_adduint32(pktout, c->remoteid);
5665 dont_log_data(ssh, pktout, PKTLOG_OMIT);
5666 ssh2_pkt_addstring_start(pktout);
5667 ssh2_pkt_addstring_data(pktout, data, len);
5668 end_log_omission(ssh, pktout);
5669 ssh2_pkt_send(ssh, pktout);
5670 bufchain_consume(&c->v.v2.outbuffer, len);
5671 c->v.v2.remwindow -= len;
5675 * After having sent as much data as we can, return the amount
5678 return bufchain_size(&c->v.v2.outbuffer);
5681 static void ssh2_try_send_and_unthrottle(struct ssh_channel *c)
5685 return; /* don't send on closing channels */
5686 bufsize = ssh2_try_send(c);
5689 case CHAN_MAINSESSION:
5690 /* stdin need not receive an unthrottle
5691 * notification since it will be polled */
5694 x11_unthrottle(c->u.x11.s);
5697 /* agent sockets are request/response and need no
5698 * buffer management */
5701 pfd_unthrottle(c->u.pfd.s);
5708 * Potentially enlarge the window on an SSH-2 channel.
5710 static void ssh2_set_window(struct ssh_channel *c, unsigned newwin)
5715 * Never send WINDOW_ADJUST for a channel that the remote side
5716 * already thinks it's closed; there's no point, since it won't
5717 * be sending any more data anyway.
5723 * Only send a WINDOW_ADJUST if there's significantly more window
5724 * available than the other end thinks there is. This saves us
5725 * sending a WINDOW_ADJUST for every character in a shell session.
5727 * "Significant" is arbitrarily defined as half the window size.
5729 if (newwin > c->v.v2.locwindow * 2) {
5730 struct Packet *pktout;
5732 pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_WINDOW_ADJUST);
5733 ssh2_pkt_adduint32(pktout, c->remoteid);
5734 ssh2_pkt_adduint32(pktout, newwin - c->v.v2.locwindow);
5735 ssh2_pkt_send(ssh, pktout);
5736 c->v.v2.locwindow = newwin;
5740 static void ssh2_msg_channel_window_adjust(Ssh ssh, struct Packet *pktin)
5742 unsigned i = ssh_pkt_getuint32(pktin);
5743 struct ssh_channel *c;
5744 c = find234(ssh->channels, &i, ssh_channelfind);
5745 if (c && !c->closes) {
5746 c->v.v2.remwindow += ssh_pkt_getuint32(pktin);
5747 ssh2_try_send_and_unthrottle(c);
5751 static void ssh2_msg_channel_data(Ssh ssh, struct Packet *pktin)
5755 unsigned i = ssh_pkt_getuint32(pktin);
5756 struct ssh_channel *c;
5757 c = find234(ssh->channels, &i, ssh_channelfind);
5759 return; /* nonexistent channel */
5760 if (pktin->type == SSH2_MSG_CHANNEL_EXTENDED_DATA &&
5761 ssh_pkt_getuint32(pktin) != SSH2_EXTENDED_DATA_STDERR)
5762 return; /* extended but not stderr */
5763 ssh_pkt_getstring(pktin, &data, &length);
5766 c->v.v2.locwindow -= length;
5768 case CHAN_MAINSESSION:
5770 from_backend(ssh->frontend, pktin->type ==
5771 SSH2_MSG_CHANNEL_EXTENDED_DATA,
5775 bufsize = x11_send(c->u.x11.s, data, length);
5778 bufsize = pfd_send(c->u.pfd.s, data, length);
5781 while (length > 0) {
5782 if (c->u.a.lensofar < 4) {
5783 unsigned int l = min(4 - c->u.a.lensofar, length);
5784 memcpy(c->u.a.msglen + c->u.a.lensofar,
5788 c->u.a.lensofar += l;
5790 if (c->u.a.lensofar == 4) {
5792 4 + GET_32BIT(c->u.a.msglen);
5793 c->u.a.message = snewn(c->u.a.totallen,
5795 memcpy(c->u.a.message, c->u.a.msglen, 4);
5797 if (c->u.a.lensofar >= 4 && length > 0) {
5799 min(c->u.a.totallen - c->u.a.lensofar,
5801 memcpy(c->u.a.message + c->u.a.lensofar,
5805 c->u.a.lensofar += l;
5807 if (c->u.a.lensofar == c->u.a.totallen) {
5810 if (agent_query(c->u.a.message,
5813 ssh_agentf_callback, c))
5814 ssh_agentf_callback(c, reply, replylen);
5815 sfree(c->u.a.message);
5816 c->u.a.lensofar = 0;
5823 * If we are not buffering too much data,
5824 * enlarge the window again at the remote side.
5826 if (bufsize < OUR_V2_WINSIZE)
5827 ssh2_set_window(c, OUR_V2_WINSIZE - bufsize);
5831 static void ssh2_msg_channel_eof(Ssh ssh, struct Packet *pktin)
5833 unsigned i = ssh_pkt_getuint32(pktin);
5834 struct ssh_channel *c;
5836 c = find234(ssh->channels, &i, ssh_channelfind);
5838 return; /* nonexistent channel */
5840 if (c->type == CHAN_X11) {
5842 * Remote EOF on an X11 channel means we should
5843 * wrap up and close the channel ourselves.
5845 x11_close(c->u.x11.s);
5847 } else if (c->type == CHAN_AGENT) {
5849 } else if (c->type == CHAN_SOCKDATA) {
5850 pfd_close(c->u.pfd.s);
5855 static void ssh2_msg_channel_close(Ssh ssh, struct Packet *pktin)
5857 unsigned i = ssh_pkt_getuint32(pktin);
5858 struct ssh_channel *c;
5859 struct Packet *pktout;
5861 c = find234(ssh->channels, &i, ssh_channelfind);
5862 if (!c || c->halfopen) {
5863 bombout(("Received CHANNEL_CLOSE for %s channel %d\n",
5864 c ? "half-open" : "nonexistent", i));
5867 /* Do pre-close processing on the channel. */
5869 case CHAN_MAINSESSION:
5870 ssh->mainchan = NULL;
5871 update_specials_menu(ssh->frontend);
5874 if (c->u.x11.s != NULL)
5875 x11_close(c->u.x11.s);
5882 if (c->u.pfd.s != NULL)
5883 pfd_close(c->u.pfd.s);
5887 if (c->closes == 0) {
5888 pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
5889 ssh2_pkt_adduint32(pktout, c->remoteid);
5890 ssh2_pkt_send(ssh, pktout);
5892 del234(ssh->channels, c);
5893 bufchain_clear(&c->v.v2.outbuffer);
5897 * See if that was the last channel left open.
5898 * (This is only our termination condition if we're
5899 * not running in -N mode.)
5901 if (!ssh->cfg.ssh_no_shell && count234(ssh->channels) == 0) {
5902 logevent("All channels closed. Disconnecting");
5905 * We used to send SSH_MSG_DISCONNECT here,
5906 * because I'd believed that _every_ conforming
5907 * SSH-2 connection had to end with a disconnect
5908 * being sent by at least one side; apparently
5909 * I was wrong and it's perfectly OK to
5910 * unceremoniously slam the connection shut
5911 * when you're done, and indeed OpenSSH feels
5912 * this is more polite than sending a
5913 * DISCONNECT. So now we don't.
5915 s->pktout = ssh2_pkt_init(SSH2_MSG_DISCONNECT);
5916 ssh2_pkt_adduint32(s->pktout, SSH2_DISCONNECT_BY_APPLICATION);
5917 ssh2_pkt_addstring(s->pktout, "All open channels closed");
5918 ssh2_pkt_addstring(s->pktout, "en"); /* language tag */
5919 ssh2_pkt_send_noqueue(ssh, s->pktout);
5921 ssh->close_expected = TRUE;
5922 ssh_closing((Plug)ssh, NULL, 0, 0);
5926 static void ssh2_msg_channel_open_confirmation(Ssh ssh, struct Packet *pktin)
5928 unsigned i = ssh_pkt_getuint32(pktin);
5929 struct ssh_channel *c;
5930 struct Packet *pktout;
5932 c = find234(ssh->channels, &i, ssh_channelfind);
5934 return; /* nonexistent channel */
5935 if (c->type != CHAN_SOCKDATA_DORMANT)
5936 return; /* dunno why they're confirming this */
5937 c->remoteid = ssh_pkt_getuint32(pktin);
5938 c->halfopen = FALSE;
5939 c->type = CHAN_SOCKDATA;
5940 c->v.v2.remwindow = ssh_pkt_getuint32(pktin);
5941 c->v.v2.remmaxpkt = ssh_pkt_getuint32(pktin);
5943 pfd_confirm(c->u.pfd.s);
5946 * We have a pending close on this channel,
5947 * which we decided on before the server acked
5948 * the channel open. So now we know the
5949 * remoteid, we can close it again.
5951 pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
5952 ssh2_pkt_adduint32(pktout, c->remoteid);
5953 ssh2_pkt_send(ssh, pktout);
5957 static void ssh2_msg_channel_open_failure(Ssh ssh, struct Packet *pktin)
5959 static const char *const reasons[] = {
5960 "<unknown reason code>",
5961 "Administratively prohibited",
5963 "Unknown channel type",
5964 "Resource shortage",
5966 unsigned i = ssh_pkt_getuint32(pktin);
5967 unsigned reason_code;
5968 char *reason_string;
5970 struct ssh_channel *c;
5971 c = find234(ssh->channels, &i, ssh_channelfind);
5973 return; /* nonexistent channel */
5974 if (c->type != CHAN_SOCKDATA_DORMANT)
5975 return; /* dunno why they're failing this */
5977 reason_code = ssh_pkt_getuint32(pktin);
5978 if (reason_code >= lenof(reasons))
5979 reason_code = 0; /* ensure reasons[reason_code] in range */
5980 ssh_pkt_getstring(pktin, &reason_string, &reason_length);
5981 logeventf(ssh, "Forwarded connection refused by server: %s [%.*s]",
5982 reasons[reason_code], reason_length, reason_string);
5984 pfd_close(c->u.pfd.s);
5986 del234(ssh->channels, c);
5990 static void ssh2_msg_channel_request(Ssh ssh, struct Packet *pktin)
5994 int typelen, want_reply;
5995 int reply = SSH2_MSG_CHANNEL_FAILURE; /* default */
5996 struct ssh_channel *c;
5997 struct Packet *pktout;
5999 localid = ssh_pkt_getuint32(pktin);
6000 ssh_pkt_getstring(pktin, &type, &typelen);
6001 want_reply = ssh2_pkt_getbool(pktin);
6004 * First, check that the channel exists. Otherwise,
6005 * we can instantly disconnect with a rude message.
6007 c = find234(ssh->channels, &localid, ssh_channelfind);
6010 sprintf(buf, "Received channel request for nonexistent"
6011 " channel %d", localid);
6013 pktout = ssh2_pkt_init(SSH2_MSG_DISCONNECT);
6014 ssh2_pkt_adduint32(pktout, SSH2_DISCONNECT_BY_APPLICATION);
6015 ssh2_pkt_addstring(pktout, buf);
6016 ssh2_pkt_addstring(pktout, "en"); /* language tag */
6017 ssh2_pkt_send_noqueue(ssh, pktout);
6018 connection_fatal(ssh->frontend, "%s", buf);
6019 ssh->close_expected = TRUE;
6020 ssh_closing((Plug)ssh, NULL, 0, 0);
6025 * Having got the channel number, we now look at
6026 * the request type string to see if it's something
6029 if (c == ssh->mainchan) {
6031 * We recognise "exit-status" and "exit-signal" on
6032 * the primary channel.
6034 if (typelen == 11 &&
6035 !memcmp(type, "exit-status", 11)) {
6037 ssh->exitcode = ssh_pkt_getuint32(pktin);
6038 logeventf(ssh, "Server sent command exit status %d",
6040 reply = SSH2_MSG_CHANNEL_SUCCESS;
6042 } else if (typelen == 11 &&
6043 !memcmp(type, "exit-signal", 11)) {
6045 int is_plausible = TRUE, is_int = FALSE;
6046 char *fmt_sig = "", *fmt_msg = "";
6048 int msglen = 0, core = FALSE;
6049 /* ICK: older versions of OpenSSH (e.g. 3.4p1)
6050 * provide an `int' for the signal, despite its
6051 * having been a `string' in the drafts since at
6052 * least 2001. (Fixed in session.c 1.147.) Try to
6053 * infer which we can safely parse it as. */
6055 unsigned char *p = pktin->body +
6057 long len = pktin->length - pktin->savedpos;
6058 unsigned long num = GET_32BIT(p); /* what is it? */
6059 /* If it's 0, it hardly matters; assume string */
6063 int maybe_int = FALSE, maybe_str = FALSE;
6064 #define CHECK_HYPOTHESIS(offset, result) \
6067 if (q >= 0 && q+4 <= len) { \
6068 q = q + 4 + GET_32BIT(p+q); \
6069 if (q >= 0 && q+4 <= len && \
6070 ((q = q + 4 + GET_32BIT(p+q))!= 0) && q == len) \
6074 CHECK_HYPOTHESIS(4+1, maybe_int);
6075 CHECK_HYPOTHESIS(4+num+1, maybe_str);
6076 #undef CHECK_HYPOTHESIS
6077 if (maybe_int && !maybe_str)
6079 else if (!maybe_int && maybe_str)
6082 /* Crikey. Either or neither. Panic. */
6083 is_plausible = FALSE;
6088 /* Old non-standard OpenSSH. */
6089 int signum = ssh_pkt_getuint32(pktin);
6090 fmt_sig = dupprintf(" %d", signum);
6092 /* As per the drafts. */
6095 ssh_pkt_getstring(pktin, &sig, &siglen);
6096 /* Signal name isn't supposed to be blank, but
6097 * let's cope gracefully if it is. */
6099 fmt_sig = dupprintf(" \"%.*s\"",
6103 core = ssh2_pkt_getbool(pktin);
6104 ssh_pkt_getstring(pktin, &msg, &msglen);
6106 fmt_msg = dupprintf(" (\"%.*s\")", msglen, msg);
6108 /* ignore lang tag */
6109 } /* else don't attempt to parse */
6110 logeventf(ssh, "Server exited on signal%s%s%s",
6111 fmt_sig, core ? " (core dumped)" : "",
6113 if (*fmt_sig) sfree(fmt_sig);
6114 if (*fmt_msg) sfree(fmt_msg);
6115 reply = SSH2_MSG_CHANNEL_SUCCESS;
6120 * This is a channel request we don't know
6121 * about, so we now either ignore the request
6122 * or respond with CHANNEL_FAILURE, depending
6125 reply = SSH2_MSG_CHANNEL_FAILURE;
6128 pktout = ssh2_pkt_init(reply);
6129 ssh2_pkt_adduint32(pktout, c->remoteid);
6130 ssh2_pkt_send(ssh, pktout);
6134 static void ssh2_msg_global_request(Ssh ssh, struct Packet *pktin)
6137 int typelen, want_reply;
6138 struct Packet *pktout;
6140 ssh_pkt_getstring(pktin, &type, &typelen);
6141 want_reply = ssh2_pkt_getbool(pktin);
6144 * We currently don't support any global requests
6145 * at all, so we either ignore the request or
6146 * respond with REQUEST_FAILURE, depending on
6150 pktout = ssh2_pkt_init(SSH2_MSG_REQUEST_FAILURE);
6151 ssh2_pkt_send(ssh, pktout);
6155 static void ssh2_msg_channel_open(Ssh ssh, struct Packet *pktin)
6163 struct ssh_channel *c;
6164 unsigned remid, winsize, pktsize;
6165 struct Packet *pktout;
6167 ssh_pkt_getstring(pktin, &type, &typelen);
6168 c = snew(struct ssh_channel);
6171 remid = ssh_pkt_getuint32(pktin);
6172 winsize = ssh_pkt_getuint32(pktin);
6173 pktsize = ssh_pkt_getuint32(pktin);
6175 if (typelen == 3 && !memcmp(type, "x11", 3)) {
6178 ssh_pkt_getstring(pktin, &peeraddr, &peeraddrlen);
6179 addrstr = snewn(peeraddrlen+1, char);
6180 memcpy(addrstr, peeraddr, peeraddrlen);
6181 addrstr[peeraddrlen] = '\0';
6182 peerport = ssh_pkt_getuint32(pktin);
6184 logeventf(ssh, "Received X11 connect request from %s:%d",
6187 if (!ssh->X11_fwd_enabled)
6188 error = "X11 forwarding is not enabled";
6189 else if (x11_init(&c->u.x11.s, ssh->cfg.x11_display, c,
6190 ssh->x11auth, addrstr, peerport,
6191 &ssh->cfg) != NULL) {
6192 error = "Unable to open an X11 connection";
6194 logevent("Opening X11 forward connection succeeded");
6199 } else if (typelen == 15 &&
6200 !memcmp(type, "forwarded-tcpip", 15)) {
6201 struct ssh_rportfwd pf, *realpf;
6204 ssh_pkt_getstring(pktin, &dummy, &dummylen);/* skip address */
6205 pf.sport = ssh_pkt_getuint32(pktin);
6206 ssh_pkt_getstring(pktin, &peeraddr, &peeraddrlen);
6207 peerport = ssh_pkt_getuint32(pktin);
6208 realpf = find234(ssh->rportfwds, &pf, NULL);
6209 logeventf(ssh, "Received remote port %d open request "
6210 "from %s:%d", pf.sport, peeraddr, peerport);
6211 if (realpf == NULL) {
6212 error = "Remote port is not recognised";
6214 const char *e = pfd_newconnect(&c->u.pfd.s,
6218 realpf->pfrec->addressfamily);
6219 logeventf(ssh, "Attempting to forward remote port to "
6220 "%s:%d", realpf->dhost, realpf->dport);
6222 logeventf(ssh, "Port open failed: %s", e);
6223 error = "Port open failed";
6225 logevent("Forwarded port opened successfully");
6226 c->type = CHAN_SOCKDATA;
6229 } else if (typelen == 22 &&
6230 !memcmp(type, "auth-agent@openssh.com", 3)) {
6231 if (!ssh->agentfwd_enabled)
6232 error = "Agent forwarding is not enabled";
6234 c->type = CHAN_AGENT; /* identify channel type */
6235 c->u.a.lensofar = 0;
6238 error = "Unsupported channel type requested";
6241 c->remoteid = remid;
6242 c->halfopen = FALSE;
6244 pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN_FAILURE);
6245 ssh2_pkt_adduint32(pktout, c->remoteid);
6246 ssh2_pkt_adduint32(pktout, SSH2_OPEN_CONNECT_FAILED);
6247 ssh2_pkt_addstring(pktout, error);
6248 ssh2_pkt_addstring(pktout, "en"); /* language tag */
6249 ssh2_pkt_send(ssh, pktout);
6250 logeventf(ssh, "Rejected channel open: %s", error);
6253 c->localid = alloc_channel_id(ssh);
6255 c->v.v2.locwindow = OUR_V2_WINSIZE;
6256 c->v.v2.remwindow = winsize;
6257 c->v.v2.remmaxpkt = pktsize;
6258 bufchain_init(&c->v.v2.outbuffer);
6259 add234(ssh->channels, c);
6260 pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION);
6261 ssh2_pkt_adduint32(pktout, c->remoteid);
6262 ssh2_pkt_adduint32(pktout, c->localid);
6263 ssh2_pkt_adduint32(pktout, c->v.v2.locwindow);
6264 ssh2_pkt_adduint32(pktout, OUR_V2_MAXPKT); /* our max pkt size */
6265 ssh2_pkt_send(ssh, pktout);
6270 * Handle the SSH-2 userauth and connection layers.
6272 static void do_ssh2_authconn(Ssh ssh, unsigned char *in, int inlen,
6273 struct Packet *pktin)
6275 struct do_ssh2_authconn_state {
6277 AUTH_INVALID, AUTH_PUBLICKEY_AGENT, AUTH_PUBLICKEY_FILE,
6279 AUTH_KEYBOARD_INTERACTIVE
6283 AUTH_TYPE_PUBLICKEY,
6284 AUTH_TYPE_PUBLICKEY_OFFER_LOUD,
6285 AUTH_TYPE_PUBLICKEY_OFFER_QUIET,
6287 AUTH_TYPE_KEYBOARD_INTERACTIVE,
6288 AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET
6290 int gotit, need_pw, can_pubkey, can_passwd, can_keyb_inter;
6291 int tried_pubkey_config, tried_agent;
6292 int kbd_inter_running, kbd_inter_refused;
6294 int num_prompts, curr_prompt, echo;
6299 void *publickey_blob;
6300 int publickey_bloblen;
6301 unsigned char request[5], *response, *p;
6305 char *pkblob, *alg, *commentp;
6306 int pklen, alglen, commentlen;
6307 int siglen, retlen, len;
6308 char *q, *agentreq, *ret;
6310 int num_env, env_left, env_ok;
6311 struct Packet *pktout;
6313 crState(do_ssh2_authconn_state);
6315 crBegin(ssh->do_ssh2_authconn_crstate);
6318 * Request userauth protocol, and await a response to it.
6320 s->pktout = ssh2_pkt_init(SSH2_MSG_SERVICE_REQUEST);
6321 ssh2_pkt_addstring(s->pktout, "ssh-userauth");
6322 ssh2_pkt_send(ssh, s->pktout);
6323 crWaitUntilV(pktin);
6324 if (pktin->type != SSH2_MSG_SERVICE_ACCEPT) {
6325 bombout(("Server refused user authentication protocol"));
6330 * We repeat this whole loop, including the username prompt,
6331 * until we manage a successful authentication. If the user
6332 * types the wrong _password_, they can be sent back to the
6333 * beginning to try another username, if this is configured on.
6334 * (If they specify a username in the config, they are never
6335 * asked, even if they do give a wrong password.)
6337 * I think this best serves the needs of
6339 * - the people who have no configuration, no keys, and just
6340 * want to try repeated (username,password) pairs until they
6341 * type both correctly
6343 * - people who have keys and configuration but occasionally
6344 * need to fall back to passwords
6346 * - people with a key held in Pageant, who might not have
6347 * logged in to a particular machine before; so they want to
6348 * type a username, and then _either_ their key will be
6349 * accepted, _or_ they will type a password. If they mistype
6350 * the username they will want to be able to get back and
6353 s->username[0] = '\0';
6354 s->got_username = FALSE;
6359 if (s->got_username && !ssh->cfg.change_username) {
6361 * We got a username last time round this loop, and
6362 * with change_username turned off we don't try to get
6365 } else if (!*ssh->cfg.username) {
6366 if (ssh_get_line && !ssh_getline_pw_only) {
6367 if (!ssh_get_line("login as: ",
6368 s->username, sizeof(s->username), FALSE)) {
6370 * get_line failed to get a username.
6373 logevent("No username provided. Abandoning session.");
6374 ssh->close_expected = TRUE;
6375 ssh_closing((Plug)ssh, NULL, 0, 0);
6379 int ret; /* need not be saved across crReturn */
6380 c_write_str(ssh, "login as: ");
6382 setup_userpass_input(ssh, s->username, sizeof(s->username), 1);
6384 crWaitUntilV(!pktin);
6385 ret = process_userpass_input(ssh, in, inlen);
6389 c_write_str(ssh, "\r\n");
6391 s->username[strcspn(s->username, "\n\r")] = '\0';
6394 strncpy(s->username, ssh->cfg.username, sizeof(s->username));
6395 s->username[sizeof(s->username)-1] = '\0';
6396 if ((flags & FLAG_VERBOSE) || (flags & FLAG_INTERACTIVE)) {
6397 stuff = dupprintf("Using username \"%s\".\r\n", s->username);
6398 c_write_str(ssh, stuff);
6402 s->got_username = TRUE;
6405 * Send an authentication request using method "none": (a)
6406 * just in case it succeeds, and (b) so that we know what
6407 * authentication methods we can usefully try next.
6409 ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
6411 s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
6412 ssh2_pkt_addstring(s->pktout, s->username);
6413 ssh2_pkt_addstring(s->pktout, "ssh-connection");/* service requested */
6414 ssh2_pkt_addstring(s->pktout, "none"); /* method */
6415 ssh2_pkt_send(ssh, s->pktout);
6416 s->type = AUTH_TYPE_NONE;
6418 s->we_are_in = FALSE;
6420 s->tried_pubkey_config = FALSE;
6421 s->tried_agent = FALSE;
6422 s->kbd_inter_running = FALSE;
6423 s->kbd_inter_refused = FALSE;
6424 /* Load the pub half of ssh->cfg.keyfile so we notice if it's in Pageant */
6425 if (!filename_is_null(ssh->cfg.keyfile)) {
6427 logeventf(ssh, "Reading private key file \"%.150s\"",
6428 filename_to_str(&ssh->cfg.keyfile));
6429 keytype = key_type(&ssh->cfg.keyfile);
6430 if (keytype == SSH_KEYTYPE_SSH2) {
6432 ssh2_userkey_loadpub(&ssh->cfg.keyfile, NULL,
6433 &s->publickey_bloblen, NULL);
6436 logeventf(ssh, "Unable to use this key file (%s)",
6437 key_type_to_str(keytype));
6438 msgbuf = dupprintf("Unable to use key file \"%.150s\""
6440 filename_to_str(&ssh->cfg.keyfile),
6441 key_type_to_str(keytype));
6442 c_write_str(ssh, msgbuf);
6444 s->publickey_blob = NULL;
6447 s->publickey_blob = NULL;
6451 * Wait for the result of the last authentication request.
6454 crWaitUntilV(pktin);
6455 while (pktin->type == SSH2_MSG_USERAUTH_BANNER) {
6459 * Don't show the banner if we're operating in
6460 * non-verbose non-interactive mode. (It's probably
6461 * a script, which means nobody will read the
6462 * banner _anyway_, and moreover the printing of
6463 * the banner will screw up processing on the
6464 * output of (say) plink.)
6466 if (flags & (FLAG_VERBOSE | FLAG_INTERACTIVE)) {
6467 ssh_pkt_getstring(pktin, &banner, &size);
6469 c_write_untrusted(ssh, banner, size);
6471 crWaitUntilV(pktin);
6473 if (pktin->type == SSH2_MSG_USERAUTH_SUCCESS) {
6474 logevent("Access granted");
6475 s->we_are_in = TRUE;
6479 if (s->kbd_inter_running &&
6480 pktin->type == SSH2_MSG_USERAUTH_INFO_REQUEST) {
6482 * This is either a further set-of-prompts packet
6483 * in keyboard-interactive authentication, or it's
6484 * the same one and we came back here with `gotit'
6485 * set. In the former case, we must reset the
6486 * curr_prompt variable.
6490 } else if (pktin->type == SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ) {
6491 /* FIXME: perhaps we should support this? */
6492 bombout(("PASSWD_CHANGEREQ not yet supported"));
6494 } else if (pktin->type != SSH2_MSG_USERAUTH_FAILURE) {
6495 bombout(("Strange packet received during authentication: type %d",
6503 * OK, we're now sitting on a USERAUTH_FAILURE message, so
6504 * we can look at the string in it and know what we can
6505 * helpfully try next.
6507 if (pktin->type == SSH2_MSG_USERAUTH_FAILURE) {
6510 ssh_pkt_getstring(pktin, &methods, &methlen);
6511 s->kbd_inter_running = FALSE;
6512 if (!ssh2_pkt_getbool(pktin)) {
6514 * We have received an unequivocal Access
6515 * Denied. This can translate to a variety of
6518 * - if we'd just tried "none" authentication,
6519 * it's not worth printing anything at all
6521 * - if we'd just tried a public key _offer_,
6522 * the message should be "Server refused our
6523 * key" (or no message at all if the key
6524 * came from Pageant)
6526 * - if we'd just tried anything else, the
6527 * message really should be "Access denied".
6529 * Additionally, if we'd just tried password
6530 * authentication, we should break out of this
6531 * whole loop so as to go back to the username
6532 * prompt (iff we're configured to allow
6533 * username change attempts).
6535 if (s->type == AUTH_TYPE_NONE) {
6537 } else if (s->type == AUTH_TYPE_PUBLICKEY_OFFER_LOUD ||
6538 s->type == AUTH_TYPE_PUBLICKEY_OFFER_QUIET) {
6539 if (s->type == AUTH_TYPE_PUBLICKEY_OFFER_LOUD)
6540 c_write_str(ssh, "Server refused our key\r\n");
6541 logevent("Server refused public key");
6542 } else if (s->type==AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET) {
6543 /* server declined keyboard-interactive; ignore */
6545 c_write_str(ssh, "Access denied\r\n");
6546 logevent("Access denied");
6547 if (s->type == AUTH_TYPE_PASSWORD &&
6548 ssh->cfg.change_username) {
6549 /* XXX perhaps we should allow
6550 * keyboard-interactive to do this too? */
6551 s->we_are_in = FALSE;
6556 c_write_str(ssh, "Further authentication required\r\n");
6557 logevent("Further authentication required");
6561 in_commasep_string("publickey", methods, methlen);
6563 in_commasep_string("password", methods, methlen);
6564 s->can_keyb_inter = ssh->cfg.try_ki_auth &&
6565 in_commasep_string("keyboard-interactive", methods, methlen);
6569 ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
6573 * Most password/passphrase prompts will be
6574 * non-echoing, so we set this to 0 by default.
6575 * Exception is that some keyboard-interactive prompts
6576 * can be echoing, in which case we'll set this to 1.
6580 if (!s->method && s->can_pubkey &&
6581 agent_exists() && !s->tried_agent) {
6583 * Attempt public-key authentication using Pageant.
6588 ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
6589 ssh->pkt_ctx |= SSH2_PKTCTX_PUBLICKEY;
6591 s->tried_agent = TRUE;
6593 logevent("Pageant is running. Requesting keys.");
6595 /* Request the keys held by the agent. */
6596 PUT_32BIT(s->request, 1);
6597 s->request[4] = SSH2_AGENTC_REQUEST_IDENTITIES;
6598 if (!agent_query(s->request, 5, &r, &s->responselen,
6599 ssh_agent_callback, ssh)) {
6603 bombout(("Unexpected data from server while"
6604 " waiting for agent response"));
6607 } while (pktin || inlen > 0);
6608 r = ssh->agent_response;
6609 s->responselen = ssh->agent_response_len;
6611 s->response = (unsigned char *) r;
6612 if (s->response && s->responselen >= 5 &&
6613 s->response[4] == SSH2_AGENT_IDENTITIES_ANSWER) {
6614 s->p = s->response + 5;
6615 s->nkeys = GET_32BIT(s->p);
6617 logeventf(ssh, "Pageant has %d SSH-2 keys", s->nkeys);
6618 for (s->keyi = 0; s->keyi < s->nkeys; s->keyi++) {
6621 logeventf(ssh, "Trying Pageant key #%d", s->keyi);
6622 s->pklen = GET_32BIT(s->p);
6624 if (s->publickey_blob &&
6625 s->pklen == s->publickey_bloblen &&
6626 !memcmp(s->p, s->publickey_blob,
6627 s->publickey_bloblen)) {
6628 logevent("This key matches configured key file");
6629 s->tried_pubkey_config = 1;
6631 s->pkblob = (char *)s->p;
6633 s->alglen = GET_32BIT(s->pkblob);
6634 s->alg = s->pkblob + 4;
6635 s->commentlen = GET_32BIT(s->p);
6637 s->commentp = (char *)s->p;
6638 s->p += s->commentlen;
6639 s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
6640 ssh2_pkt_addstring(s->pktout, s->username);
6641 ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
6642 ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
6643 ssh2_pkt_addbool(s->pktout, FALSE); /* no signature included */
6644 ssh2_pkt_addstring_start(s->pktout);
6645 ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
6646 ssh2_pkt_addstring_start(s->pktout);
6647 ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
6648 ssh2_pkt_send(ssh, s->pktout);
6650 crWaitUntilV(pktin);
6651 if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
6652 logevent("Key refused");
6656 if (flags & FLAG_VERBOSE) {
6657 c_write_str(ssh, "Authenticating with "
6659 c_write(ssh, s->commentp, s->commentlen);
6660 c_write_str(ssh, "\" from agent\r\n");
6664 * Server is willing to accept the key.
6665 * Construct a SIGN_REQUEST.
6667 s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
6668 ssh2_pkt_addstring(s->pktout, s->username);
6669 ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
6670 ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
6671 ssh2_pkt_addbool(s->pktout, TRUE);
6672 ssh2_pkt_addstring_start(s->pktout);
6673 ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
6674 ssh2_pkt_addstring_start(s->pktout);
6675 ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
6677 s->siglen = s->pktout->length - 5 + 4 + 20;
6678 if (ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)
6680 s->len = 1; /* message type */
6681 s->len += 4 + s->pklen; /* key blob */
6682 s->len += 4 + s->siglen; /* data to sign */
6683 s->len += 4; /* flags */
6684 s->agentreq = snewn(4 + s->len, char);
6685 PUT_32BIT(s->agentreq, s->len);
6686 s->q = s->agentreq + 4;
6687 *s->q++ = SSH2_AGENTC_SIGN_REQUEST;
6688 PUT_32BIT(s->q, s->pklen);
6690 memcpy(s->q, s->pkblob, s->pklen);
6692 PUT_32BIT(s->q, s->siglen);
6694 /* Now the data to be signed... */
6695 if (!(ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)) {
6696 PUT_32BIT(s->q, 20);
6699 memcpy(s->q, ssh->v2_session_id, 20);
6701 memcpy(s->q, s->pktout->data + 5,
6702 s->pktout->length - 5);
6703 s->q += s->pktout->length - 5;
6704 /* And finally the (zero) flags word. */
6706 if (!agent_query(s->agentreq, s->len + 4,
6708 ssh_agent_callback, ssh)) {
6712 bombout(("Unexpected data from server"
6713 " while waiting for agent"
6717 } while (pktin || inlen > 0);
6718 vret = ssh->agent_response;
6719 s->retlen = ssh->agent_response_len;
6724 if (s->ret[4] == SSH2_AGENT_SIGN_RESPONSE) {
6725 logevent("Sending Pageant's response");
6726 ssh2_add_sigblob(ssh, s->pktout,
6727 s->pkblob, s->pklen,
6729 GET_32BIT(s->ret + 5));
6730 ssh2_pkt_send(ssh, s->pktout);
6735 ("Pageant failed to answer challenge");
6746 if (!s->method && s->can_pubkey && s->publickey_blob
6747 && !s->tried_pubkey_config) {
6748 unsigned char *pub_blob;
6749 char *algorithm, *comment;
6752 s->tried_pubkey_config = TRUE;
6754 ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
6755 ssh->pkt_ctx |= SSH2_PKTCTX_PUBLICKEY;
6758 * Try the public key supplied in the configuration.
6760 * First, offer the public blob to see if the server is
6761 * willing to accept it.
6764 (unsigned char *)ssh2_userkey_loadpub(&ssh->cfg.keyfile,
6769 s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
6770 ssh2_pkt_addstring(s->pktout, s->username);
6771 ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
6772 ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
6773 ssh2_pkt_addbool(s->pktout, FALSE); /* no signature included */
6774 ssh2_pkt_addstring(s->pktout, algorithm);
6775 ssh2_pkt_addstring_start(s->pktout);
6776 ssh2_pkt_addstring_data(s->pktout, (char *)pub_blob,
6778 ssh2_pkt_send(ssh, s->pktout);
6779 logevent("Offered public key");
6781 crWaitUntilV(pktin);
6782 if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
6784 s->type = AUTH_TYPE_PUBLICKEY_OFFER_LOUD;
6785 continue; /* key refused; give up on it */
6788 logevent("Offer of public key accepted");
6790 * Actually attempt a serious authentication using
6793 if (ssh2_userkey_encrypted(&ssh->cfg.keyfile, &comment)) {
6794 sprintf(s->pwprompt,
6795 "Passphrase for key \"%.100s\": ",
6801 if (flags & FLAG_VERBOSE) {
6802 c_write_str(ssh, "Authenticating with public key \"");
6803 c_write_str(ssh, comment);
6804 c_write_str(ssh, "\"\r\n");
6806 s->method = AUTH_PUBLICKEY_FILE;
6810 if (!s->method && s->can_keyb_inter && !s->kbd_inter_refused &&
6811 !s->kbd_inter_running) {
6812 s->method = AUTH_KEYBOARD_INTERACTIVE;
6813 s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
6815 ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
6816 ssh->pkt_ctx |= SSH2_PKTCTX_KBDINTER;
6818 s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
6819 ssh2_pkt_addstring(s->pktout, s->username);
6820 ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
6821 ssh2_pkt_addstring(s->pktout, "keyboard-interactive"); /* method */
6822 ssh2_pkt_addstring(s->pktout, ""); /* lang */
6823 ssh2_pkt_addstring(s->pktout, "");
6824 ssh2_pkt_send(ssh, s->pktout);
6826 crWaitUntilV(pktin);
6827 if (pktin->type != SSH2_MSG_USERAUTH_INFO_REQUEST) {
6828 if (pktin->type == SSH2_MSG_USERAUTH_FAILURE)
6830 logevent("Keyboard-interactive authentication refused");
6831 s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET;
6832 s->kbd_inter_refused = TRUE; /* don't try it again */
6836 c_write_str(ssh, "Using keyboard-interactive authentication.\r\n");
6837 s->kbd_inter_running = TRUE;
6841 if (s->kbd_inter_running) {
6842 s->method = AUTH_KEYBOARD_INTERACTIVE;
6843 s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
6845 ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
6846 ssh->pkt_ctx |= SSH2_PKTCTX_KBDINTER;
6848 if (s->curr_prompt == 0) {
6850 * We've got a fresh USERAUTH_INFO_REQUEST.
6851 * Display header data, and start going through
6854 char *name, *inst, *lang;
6855 int name_len, inst_len, lang_len;
6857 ssh_pkt_getstring(pktin, &name, &name_len);
6858 ssh_pkt_getstring(pktin, &inst, &inst_len);
6859 ssh_pkt_getstring(pktin, &lang, &lang_len);
6861 c_write_untrusted(ssh, name, name_len);
6862 c_write_str(ssh, "\r\n");
6865 c_write_untrusted(ssh, inst, inst_len);
6866 c_write_str(ssh, "\r\n");
6868 s->num_prompts = ssh_pkt_getuint32(pktin);
6872 * If there are prompts remaining in the packet,
6873 * display one and get a response.
6875 if (s->curr_prompt < s->num_prompts) {
6879 ssh_pkt_getstring(pktin, &prompt, &prompt_len);
6880 if (prompt_len > 0) {
6881 static const char trunc[] = "<prompt truncated>: ";
6882 static const int prlen = sizeof(s->pwprompt) -
6884 if (prompt_len > prlen) {
6885 memcpy(s->pwprompt, prompt, prlen);
6886 strcpy(s->pwprompt + prlen, trunc);
6888 memcpy(s->pwprompt, prompt, prompt_len);
6889 s->pwprompt[prompt_len] = '\0';
6893 "<server failed to send prompt>: ");
6895 s->echo = ssh2_pkt_getbool(pktin);
6901 if (!s->method && s->can_passwd) {
6902 s->method = AUTH_PASSWORD;
6903 ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
6904 ssh->pkt_ctx |= SSH2_PKTCTX_PASSWORD;
6905 sprintf(s->pwprompt, "%.90s@%.90s's password: ", s->username,
6912 if (!ssh_get_line(s->pwprompt, s->password,
6913 sizeof(s->password), TRUE)) {
6915 * get_line failed to get a password (for
6916 * example because one was supplied on the
6917 * command line which has already failed to
6920 s->pktout = ssh2_pkt_init(SSH2_MSG_DISCONNECT);
6921 ssh2_pkt_adduint32(s->pktout,SSH2_DISCONNECT_BY_APPLICATION);
6922 ssh2_pkt_addstring(s->pktout, "No more passwords available"
6924 ssh2_pkt_addstring(s->pktout, "en"); /* language tag */
6925 ssh2_pkt_send_noqueue(ssh, s->pktout);
6926 logevent("Unable to authenticate");
6927 connection_fatal(ssh->frontend,
6928 "Unable to authenticate");
6929 ssh->close_expected = TRUE;
6930 ssh_closing((Plug)ssh, NULL, 0, 0);
6934 int ret; /* need not be saved across crReturn */
6935 c_write_untrusted(ssh, s->pwprompt, strlen(s->pwprompt));
6938 setup_userpass_input(ssh, s->password,
6939 sizeof(s->password), s->echo);
6941 crWaitUntilV(!pktin);
6942 ret = process_userpass_input(ssh, in, inlen);
6946 c_write_str(ssh, "\r\n");
6950 if (s->method == AUTH_PUBLICKEY_FILE) {
6952 * We have our passphrase. Now try the actual authentication.
6954 struct ssh2_userkey *key;
6955 const char *error = NULL;
6957 key = ssh2_load_userkey(&ssh->cfg.keyfile, s->password,
6959 if (key == SSH2_WRONG_PASSPHRASE || key == NULL) {
6960 if (key == SSH2_WRONG_PASSPHRASE) {
6961 c_write_str(ssh, "Wrong passphrase\r\n");
6962 s->tried_pubkey_config = FALSE;
6964 c_write_str(ssh, "Unable to load private key (");
6965 c_write_str(ssh, error);
6966 c_write_str(ssh, ")\r\n");
6967 s->tried_pubkey_config = TRUE;
6969 /* Send a spurious AUTH_NONE to return to the top. */
6970 s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
6971 ssh2_pkt_addstring(s->pktout, s->username);
6972 ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
6973 ssh2_pkt_addstring(s->pktout, "none"); /* method */
6974 ssh2_pkt_send(ssh, s->pktout);
6975 s->type = AUTH_TYPE_NONE;
6977 unsigned char *pkblob, *sigblob, *sigdata;
6978 int pkblob_len, sigblob_len, sigdata_len;
6982 * We have loaded the private key and the server
6983 * has announced that it's willing to accept it.
6984 * Hallelujah. Generate a signature and send it.
6986 s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
6987 ssh2_pkt_addstring(s->pktout, s->username);
6988 ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
6989 ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
6990 ssh2_pkt_addbool(s->pktout, TRUE);
6991 ssh2_pkt_addstring(s->pktout, key->alg->name);
6992 pkblob = key->alg->public_blob(key->data, &pkblob_len);
6993 ssh2_pkt_addstring_start(s->pktout);
6994 ssh2_pkt_addstring_data(s->pktout, (char *)pkblob, pkblob_len);
6997 * The data to be signed is:
7001 * followed by everything so far placed in the
7004 sigdata_len = s->pktout->length - 5 + 4 + 20;
7005 if (ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)
7007 sigdata = snewn(sigdata_len, unsigned char);
7009 if (!(ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)) {
7010 PUT_32BIT(sigdata+p, 20);
7013 memcpy(sigdata+p, ssh->v2_session_id, 20); p += 20;
7014 memcpy(sigdata+p, s->pktout->data + 5,
7015 s->pktout->length - 5);
7016 p += s->pktout->length - 5;
7017 assert(p == sigdata_len);
7018 sigblob = key->alg->sign(key->data, (char *)sigdata,
7019 sigdata_len, &sigblob_len);
7020 ssh2_add_sigblob(ssh, s->pktout, pkblob, pkblob_len,
7021 sigblob, sigblob_len);
7026 ssh2_pkt_send(ssh, s->pktout);
7027 s->type = AUTH_TYPE_PUBLICKEY;
7028 key->alg->freekey(key->data);
7030 } else if (s->method == AUTH_PASSWORD) {
7032 * We pad out the password packet to 256 bytes to make
7033 * it harder for an attacker to find the length of the
7036 * Anyone using a password longer than 256 bytes
7037 * probably doesn't have much to worry about from
7038 * people who find out how long their password is!
7040 s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
7041 s->pktout->forcepad = 256;
7042 ssh2_pkt_addstring(s->pktout, s->username);
7043 ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
7044 ssh2_pkt_addstring(s->pktout, "password");
7045 ssh2_pkt_addbool(s->pktout, FALSE);
7046 dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
7047 ssh2_pkt_addstring(s->pktout, s->password);
7048 memset(s->password, 0, sizeof(s->password));
7049 end_log_omission(ssh, s->pktout);
7050 ssh2_pkt_send(ssh, s->pktout);
7051 logevent("Sent password");
7052 s->type = AUTH_TYPE_PASSWORD;
7053 } else if (s->method == AUTH_KEYBOARD_INTERACTIVE) {
7054 if (s->curr_prompt == 0) {
7055 s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_INFO_RESPONSE);
7056 s->pktout->forcepad = 256;
7057 ssh2_pkt_adduint32(s->pktout, s->num_prompts);
7059 if (s->need_pw) { /* only add pw if we just got one! */
7060 dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
7061 ssh2_pkt_addstring(s->pktout, s->password);
7062 memset(s->password, 0, sizeof(s->password));
7063 end_log_omission(ssh, s->pktout);
7066 if (s->curr_prompt >= s->num_prompts) {
7067 ssh2_pkt_send(ssh, s->pktout);
7070 * If there are prompts remaining, we set
7071 * `gotit' so that we won't attempt to get
7072 * another packet. Then we go back round the
7073 * loop and will end up retrieving another
7074 * prompt out of the existing packet. Funky or
7079 s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
7081 c_write_str(ssh, "No supported authentication methods"
7082 " left to try!\r\n");
7083 logevent("No supported authentications offered."
7085 s->pktout = ssh2_pkt_init(SSH2_MSG_DISCONNECT);
7086 ssh2_pkt_adduint32(s->pktout, SSH2_DISCONNECT_BY_APPLICATION);
7087 ssh2_pkt_addstring(s->pktout, "No supported authentication"
7088 " methods available");
7089 ssh2_pkt_addstring(s->pktout, "en"); /* language tag */
7090 ssh2_pkt_send_noqueue(ssh, s->pktout);
7091 ssh->close_expected = TRUE;
7092 ssh_closing((Plug)ssh, NULL, 0, 0);
7096 } while (!s->we_are_in);
7099 * Now we're authenticated for the connection protocol. The
7100 * connection protocol will automatically have started at this
7101 * point; there's no need to send SERVICE_REQUEST.
7104 ssh->channels = newtree234(ssh_channelcmp);
7107 * Set up handlers for some connection protocol messages, so we
7108 * don't have to handle them repeatedly in this coroutine.
7110 ssh->packet_dispatch[SSH2_MSG_CHANNEL_WINDOW_ADJUST] =
7111 ssh2_msg_channel_window_adjust;
7112 ssh->packet_dispatch[SSH2_MSG_GLOBAL_REQUEST] =
7113 ssh2_msg_global_request;
7116 * Create the main session channel.
7118 if (!ssh->cfg.ssh_no_shell) {
7119 ssh->mainchan = snew(struct ssh_channel);
7120 ssh->mainchan->ssh = ssh;
7121 ssh->mainchan->localid = alloc_channel_id(ssh);
7122 s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN);
7123 ssh2_pkt_addstring(s->pktout, "session");
7124 ssh2_pkt_adduint32(s->pktout, ssh->mainchan->localid);
7125 ssh->mainchan->v.v2.locwindow = OUR_V2_WINSIZE;
7126 ssh2_pkt_adduint32(s->pktout, ssh->mainchan->v.v2.locwindow);/* our window size */
7127 ssh2_pkt_adduint32(s->pktout, OUR_V2_MAXPKT); /* our max pkt size */
7128 ssh2_pkt_send(ssh, s->pktout);
7129 crWaitUntilV(pktin);
7130 if (pktin->type != SSH2_MSG_CHANNEL_OPEN_CONFIRMATION) {
7131 bombout(("Server refused to open a session"));
7133 /* FIXME: error data comes back in FAILURE packet */
7135 if (ssh_pkt_getuint32(pktin) != ssh->mainchan->localid) {
7136 bombout(("Server's channel confirmation cited wrong channel"));
7139 ssh->mainchan->remoteid = ssh_pkt_getuint32(pktin);
7140 ssh->mainchan->halfopen = FALSE;
7141 ssh->mainchan->type = CHAN_MAINSESSION;
7142 ssh->mainchan->closes = 0;
7143 ssh->mainchan->v.v2.remwindow = ssh_pkt_getuint32(pktin);
7144 ssh->mainchan->v.v2.remmaxpkt = ssh_pkt_getuint32(pktin);
7145 bufchain_init(&ssh->mainchan->v.v2.outbuffer);
7146 add234(ssh->channels, ssh->mainchan);
7147 update_specials_menu(ssh->frontend);
7148 logevent("Opened channel for session");
7150 ssh->mainchan = NULL;
7153 * Now we have a channel, make dispatch table entries for
7154 * general channel-based messages.
7156 ssh->packet_dispatch[SSH2_MSG_CHANNEL_DATA] =
7157 ssh->packet_dispatch[SSH2_MSG_CHANNEL_EXTENDED_DATA] =
7158 ssh2_msg_channel_data;
7159 ssh->packet_dispatch[SSH2_MSG_CHANNEL_EOF] = ssh2_msg_channel_eof;
7160 ssh->packet_dispatch[SSH2_MSG_CHANNEL_CLOSE] = ssh2_msg_channel_close;
7161 ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_CONFIRMATION] =
7162 ssh2_msg_channel_open_confirmation;
7163 ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_FAILURE] =
7164 ssh2_msg_channel_open_failure;
7165 ssh->packet_dispatch[SSH2_MSG_CHANNEL_REQUEST] =
7166 ssh2_msg_channel_request;
7167 ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN] =
7168 ssh2_msg_channel_open;
7171 * Potentially enable X11 forwarding.
7173 if (ssh->mainchan && ssh->cfg.x11_forward) {
7174 char proto[20], data[64];
7175 logevent("Requesting X11 forwarding");
7176 ssh->x11auth = x11_invent_auth(proto, sizeof(proto),
7177 data, sizeof(data), ssh->cfg.x11_auth);
7178 x11_get_real_auth(ssh->x11auth, ssh->cfg.x11_display);
7179 s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
7180 ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid);
7181 ssh2_pkt_addstring(s->pktout, "x11-req");
7182 ssh2_pkt_addbool(s->pktout, 1); /* want reply */
7183 ssh2_pkt_addbool(s->pktout, 0); /* many connections */
7184 ssh2_pkt_addstring(s->pktout, proto);
7185 ssh2_pkt_addstring(s->pktout, data);
7186 ssh2_pkt_adduint32(s->pktout, x11_get_screen_number(ssh->cfg.x11_display));
7187 ssh2_pkt_send(ssh, s->pktout);
7189 crWaitUntilV(pktin);
7191 if (pktin->type != SSH2_MSG_CHANNEL_SUCCESS) {
7192 if (pktin->type != SSH2_MSG_CHANNEL_FAILURE) {
7193 bombout(("Unexpected response to X11 forwarding request:"
7194 " packet type %d", pktin->type));
7197 logevent("X11 forwarding refused");
7199 logevent("X11 forwarding enabled");
7200 ssh->X11_fwd_enabled = TRUE;
7205 * Enable port forwardings.
7207 ssh_setup_portfwd(ssh, &ssh->cfg);
7210 * Potentially enable agent forwarding.
7212 if (ssh->mainchan && ssh->cfg.agentfwd && agent_exists()) {
7213 logevent("Requesting OpenSSH-style agent forwarding");
7214 s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
7215 ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid);
7216 ssh2_pkt_addstring(s->pktout, "auth-agent-req@openssh.com");
7217 ssh2_pkt_addbool(s->pktout, 1); /* want reply */
7218 ssh2_pkt_send(ssh, s->pktout);
7220 crWaitUntilV(pktin);
7222 if (pktin->type != SSH2_MSG_CHANNEL_SUCCESS) {
7223 if (pktin->type != SSH2_MSG_CHANNEL_FAILURE) {
7224 bombout(("Unexpected response to agent forwarding request:"
7225 " packet type %d", pktin->type));
7228 logevent("Agent forwarding refused");
7230 logevent("Agent forwarding enabled");
7231 ssh->agentfwd_enabled = TRUE;
7236 * Now allocate a pty for the session.
7238 if (ssh->mainchan && !ssh->cfg.nopty) {
7239 /* Unpick the terminal-speed string. */
7240 /* XXX perhaps we should allow no speeds to be sent. */
7241 ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
7242 sscanf(ssh->cfg.termspeed, "%d,%d", &ssh->ospeed, &ssh->ispeed);
7243 /* Build the pty request. */
7244 s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
7245 ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid); /* recipient channel */
7246 ssh2_pkt_addstring(s->pktout, "pty-req");
7247 ssh2_pkt_addbool(s->pktout, 1); /* want reply */
7248 ssh2_pkt_addstring(s->pktout, ssh->cfg.termtype);
7249 ssh2_pkt_adduint32(s->pktout, ssh->term_width);
7250 ssh2_pkt_adduint32(s->pktout, ssh->term_height);
7251 ssh2_pkt_adduint32(s->pktout, 0); /* pixel width */
7252 ssh2_pkt_adduint32(s->pktout, 0); /* pixel height */
7253 ssh2_pkt_addstring_start(s->pktout);
7254 ssh2_pkt_addbyte(s->pktout, 128); /* TTY_OP_ISPEED */
7255 ssh2_pkt_adduint32(s->pktout, ssh->ispeed);
7256 ssh2_pkt_addbyte(s->pktout, 129); /* TTY_OP_OSPEED */
7257 ssh2_pkt_adduint32(s->pktout, ssh->ospeed);
7258 ssh2_pkt_addstring_data(s->pktout, "\0", 1); /* TTY_OP_END */
7259 ssh2_pkt_send(ssh, s->pktout);
7260 ssh->state = SSH_STATE_INTERMED;
7262 crWaitUntilV(pktin);
7264 if (pktin->type != SSH2_MSG_CHANNEL_SUCCESS) {
7265 if (pktin->type != SSH2_MSG_CHANNEL_FAILURE) {
7266 bombout(("Unexpected response to pty request:"
7267 " packet type %d", pktin->type));
7270 c_write_str(ssh, "Server refused to allocate pty\r\n");
7271 ssh->editing = ssh->echoing = 1;
7273 logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
7274 ssh->ospeed, ssh->ispeed);
7277 ssh->editing = ssh->echoing = 1;
7281 * Send environment variables.
7283 * Simplest thing here is to send all the requests at once, and
7284 * then wait for a whole bunch of successes or failures.
7286 if (ssh->mainchan && *ssh->cfg.environmt) {
7287 char *e = ssh->cfg.environmt;
7288 char *var, *varend, *val;
7294 while (*e && *e != '\t') e++;
7296 if (*e == '\t') e++;
7301 s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
7302 ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid);
7303 ssh2_pkt_addstring(s->pktout, "env");
7304 ssh2_pkt_addbool(s->pktout, 1); /* want reply */
7305 ssh2_pkt_addstring_start(s->pktout);
7306 ssh2_pkt_addstring_data(s->pktout, var, varend-var);
7307 ssh2_pkt_addstring(s->pktout, val);
7308 ssh2_pkt_send(ssh, s->pktout);
7313 logeventf(ssh, "Sent %d environment variables", s->num_env);
7316 s->env_left = s->num_env;
7318 while (s->env_left > 0) {
7319 crWaitUntilV(pktin);
7321 if (pktin->type != SSH2_MSG_CHANNEL_SUCCESS) {
7322 if (pktin->type != SSH2_MSG_CHANNEL_FAILURE) {
7323 bombout(("Unexpected response to environment request:"
7324 " packet type %d", pktin->type));
7334 if (s->env_ok == s->num_env) {
7335 logevent("All environment variables successfully set");
7336 } else if (s->env_ok == 0) {
7337 logevent("All environment variables refused");
7338 c_write_str(ssh, "Server refused to set environment variables\r\n");
7340 logeventf(ssh, "%d environment variables refused",
7341 s->num_env - s->env_ok);
7342 c_write_str(ssh, "Server refused to set all environment variables\r\n");
7347 * Start a shell or a remote command. We may have to attempt
7348 * this twice if the config data has provided a second choice
7351 if (ssh->mainchan) while (1) {
7355 if (ssh->fallback_cmd) {
7356 subsys = ssh->cfg.ssh_subsys2;
7357 cmd = ssh->cfg.remote_cmd_ptr2;
7359 subsys = ssh->cfg.ssh_subsys;
7360 cmd = ssh->cfg.remote_cmd_ptr;
7361 if (!cmd) cmd = ssh->cfg.remote_cmd;
7364 s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
7365 ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid); /* recipient channel */
7367 ssh2_pkt_addstring(s->pktout, "subsystem");
7368 ssh2_pkt_addbool(s->pktout, 1); /* want reply */
7369 ssh2_pkt_addstring(s->pktout, cmd);
7371 ssh2_pkt_addstring(s->pktout, "exec");
7372 ssh2_pkt_addbool(s->pktout, 1); /* want reply */
7373 ssh2_pkt_addstring(s->pktout, cmd);
7375 ssh2_pkt_addstring(s->pktout, "shell");
7376 ssh2_pkt_addbool(s->pktout, 1); /* want reply */
7378 ssh2_pkt_send(ssh, s->pktout);
7380 crWaitUntilV(pktin);
7382 if (pktin->type != SSH2_MSG_CHANNEL_SUCCESS) {
7383 if (pktin->type != SSH2_MSG_CHANNEL_FAILURE) {
7384 bombout(("Unexpected response to shell/command request:"
7385 " packet type %d", pktin->type));
7389 * We failed to start the command. If this is the
7390 * fallback command, we really are finished; if it's
7391 * not, and if the fallback command exists, try falling
7392 * back to it before complaining.
7394 if (!ssh->fallback_cmd && ssh->cfg.remote_cmd_ptr2 != NULL) {
7395 logevent("Primary command failed; attempting fallback");
7396 ssh->fallback_cmd = TRUE;
7399 bombout(("Server refused to start a shell/command"));
7402 logevent("Started a shell/command");
7407 ssh->state = SSH_STATE_SESSION;
7408 if (ssh->size_needed)
7409 ssh_size(ssh, ssh->term_width, ssh->term_height);
7410 if (ssh->eof_needed)
7411 ssh_special(ssh, TS_EOF);
7417 ldisc_send(ssh->ldisc, NULL, 0, 0);/* cause ldisc to notice changes */
7422 s->try_send = FALSE;
7426 * _All_ the connection-layer packets we expect to
7427 * receive are now handled by the dispatch table.
7428 * Anything that reaches here must be bogus.
7431 bombout(("Strange packet received: type %d", pktin->type));
7433 } else if (ssh->mainchan) {
7435 * We have spare data. Add it to the channel buffer.
7437 ssh2_add_channel_data(ssh->mainchan, (char *)in, inlen);
7442 struct ssh_channel *c;
7444 * Try to send data on all channels if we can.
7446 for (i = 0; NULL != (c = index234(ssh->channels, i)); i++)
7447 ssh2_try_send_and_unthrottle(c);
7455 * Handlers for SSH-2 messages that might arrive at any moment.
7457 static void ssh2_msg_disconnect(Ssh ssh, struct Packet *pktin)
7459 /* log reason code in disconnect message */
7461 int nowlen, reason, msglen;
7463 reason = ssh_pkt_getuint32(pktin);
7464 ssh_pkt_getstring(pktin, &msg, &msglen);
7466 if (reason > 0 && reason < lenof(ssh2_disconnect_reasons)) {
7467 buf = dupprintf("Received disconnect message (%s)",
7468 ssh2_disconnect_reasons[reason]);
7470 buf = dupprintf("Received disconnect message (unknown"
7471 " type %d)", reason);
7475 buf = dupprintf("Disconnection message text: %n%.*s",
7476 &nowlen, msglen, msg);
7478 bombout(("Server sent disconnect message\ntype %d (%s):\n\"%s\"",
7480 (reason > 0 && reason < lenof(ssh2_disconnect_reasons)) ?
7481 ssh2_disconnect_reasons[reason] : "unknown",
7486 static void ssh2_msg_debug(Ssh ssh, struct Packet *pktin)
7488 /* log the debug message */
7493 /* XXX maybe we should actually take notice of this */
7494 always_display = ssh2_pkt_getbool(pktin);
7495 ssh_pkt_getstring(pktin, &msg, &msglen);
7497 logeventf(ssh, "Remote debug message: %.*s", msglen, msg);
7500 static void ssh2_msg_something_unimplemented(Ssh ssh, struct Packet *pktin)
7502 struct Packet *pktout;
7503 pktout = ssh2_pkt_init(SSH2_MSG_UNIMPLEMENTED);
7504 ssh2_pkt_adduint32(pktout, pktin->sequence);
7506 * UNIMPLEMENTED messages MUST appear in the same order as the
7507 * messages they respond to. Hence, never queue them.
7509 ssh2_pkt_send_noqueue(ssh, pktout);
7513 * Handle the top-level SSH-2 protocol.
7515 static void ssh2_protocol_setup(Ssh ssh)
7520 * Most messages cause SSH2_MSG_UNIMPLEMENTED.
7522 for (i = 0; i < 256; i++)
7523 ssh->packet_dispatch[i] = ssh2_msg_something_unimplemented;
7526 * Any message we actually understand, we set to NULL so that
7527 * the coroutines will get it.
7529 ssh->packet_dispatch[SSH2_MSG_UNIMPLEMENTED] = NULL;
7530 ssh->packet_dispatch[SSH2_MSG_SERVICE_REQUEST] = NULL;
7531 ssh->packet_dispatch[SSH2_MSG_SERVICE_ACCEPT] = NULL;
7532 ssh->packet_dispatch[SSH2_MSG_KEXINIT] = NULL;
7533 ssh->packet_dispatch[SSH2_MSG_NEWKEYS] = NULL;
7534 ssh->packet_dispatch[SSH2_MSG_KEXDH_INIT] = NULL;
7535 ssh->packet_dispatch[SSH2_MSG_KEXDH_REPLY] = NULL;
7536 /* ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_REQUEST] = NULL; duplicate case value */
7537 /* ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_GROUP] = NULL; duplicate case value */
7538 ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_INIT] = NULL;
7539 ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_REPLY] = NULL;
7540 ssh->packet_dispatch[SSH2_MSG_USERAUTH_REQUEST] = NULL;
7541 ssh->packet_dispatch[SSH2_MSG_USERAUTH_FAILURE] = NULL;
7542 ssh->packet_dispatch[SSH2_MSG_USERAUTH_SUCCESS] = NULL;
7543 ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] = NULL;
7544 ssh->packet_dispatch[SSH2_MSG_USERAUTH_PK_OK] = NULL;
7545 /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ] = NULL; duplicate case value */
7546 /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_REQUEST] = NULL; duplicate case value */
7547 ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_RESPONSE] = NULL;
7548 ssh->packet_dispatch[SSH2_MSG_GLOBAL_REQUEST] = NULL;
7549 ssh->packet_dispatch[SSH2_MSG_REQUEST_SUCCESS] = NULL;
7550 ssh->packet_dispatch[SSH2_MSG_REQUEST_FAILURE] = NULL;
7551 ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN] = NULL;
7552 ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_CONFIRMATION] = NULL;
7553 ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_FAILURE] = NULL;
7554 ssh->packet_dispatch[SSH2_MSG_CHANNEL_WINDOW_ADJUST] = NULL;
7555 ssh->packet_dispatch[SSH2_MSG_CHANNEL_DATA] = NULL;
7556 ssh->packet_dispatch[SSH2_MSG_CHANNEL_EXTENDED_DATA] = NULL;
7557 ssh->packet_dispatch[SSH2_MSG_CHANNEL_EOF] = NULL;
7558 ssh->packet_dispatch[SSH2_MSG_CHANNEL_CLOSE] = NULL;
7559 ssh->packet_dispatch[SSH2_MSG_CHANNEL_REQUEST] = NULL;
7560 ssh->packet_dispatch[SSH2_MSG_CHANNEL_SUCCESS] = NULL;
7561 ssh->packet_dispatch[SSH2_MSG_CHANNEL_FAILURE] = NULL;
7564 * These special message types we install handlers for.
7566 ssh->packet_dispatch[SSH2_MSG_DISCONNECT] = ssh2_msg_disconnect;
7567 ssh->packet_dispatch[SSH2_MSG_IGNORE] = ssh_msg_ignore; /* shared with SSH-1 */
7568 ssh->packet_dispatch[SSH2_MSG_DEBUG] = ssh2_msg_debug;
7571 static void ssh2_timer(void *ctx, long now)
7575 if (ssh->state == SSH_STATE_CLOSED)
7578 if (!ssh->kex_in_progress && ssh->cfg.ssh_rekey_time != 0 &&
7579 now - ssh->next_rekey >= 0) {
7580 do_ssh2_transport(ssh, "timeout", -1, NULL);
7584 static void ssh2_protocol(Ssh ssh, void *vin, int inlen,
7585 struct Packet *pktin)
7587 unsigned char *in = (unsigned char *)vin;
7588 if (ssh->state == SSH_STATE_CLOSED)
7592 ssh->incoming_data_size += pktin->encrypted_len;
7593 if (!ssh->kex_in_progress &&
7594 ssh->max_data_size != 0 &&
7595 ssh->incoming_data_size > ssh->max_data_size)
7596 do_ssh2_transport(ssh, "too much data received", -1, NULL);
7599 if (pktin && ssh->packet_dispatch[pktin->type]) {
7600 ssh->packet_dispatch[pktin->type](ssh, pktin);
7604 if (!ssh->protocol_initial_phase_done ||
7605 (pktin && pktin->type >= 20 && pktin->type < 50)) {
7606 if (do_ssh2_transport(ssh, in, inlen, pktin) &&
7607 !ssh->protocol_initial_phase_done) {
7608 ssh->protocol_initial_phase_done = TRUE;
7610 * Allow authconn to initialise itself.
7612 do_ssh2_authconn(ssh, NULL, 0, NULL);
7615 do_ssh2_authconn(ssh, in, inlen, pktin);
7620 * Called to set up the connection.
7622 * Returns an error message, or NULL on success.
7624 static const char *ssh_init(void *frontend_handle, void **backend_handle,
7626 char *host, int port, char **realhost, int nodelay,
7632 ssh = snew(struct ssh_tag);
7633 ssh->cfg = *cfg; /* STRUCTURE COPY */
7634 ssh->version = 0; /* when not ready yet */
7637 ssh->v1_cipher_ctx = NULL;
7638 ssh->crcda_ctx = NULL;
7639 ssh->cscipher = NULL;
7640 ssh->cs_cipher_ctx = NULL;
7641 ssh->sccipher = NULL;
7642 ssh->sc_cipher_ctx = NULL;
7644 ssh->cs_mac_ctx = NULL;
7646 ssh->sc_mac_ctx = NULL;
7648 ssh->cs_comp_ctx = NULL;
7650 ssh->sc_comp_ctx = NULL;
7652 ssh->kex_ctx = NULL;
7653 ssh->hostkey = NULL;
7655 ssh->close_expected = FALSE;
7656 ssh->state = SSH_STATE_PREPACKET;
7657 ssh->size_needed = FALSE;
7658 ssh->eof_needed = FALSE;
7661 ssh->deferred_send_data = NULL;
7662 ssh->deferred_len = 0;
7663 ssh->deferred_size = 0;
7664 ssh->fallback_cmd = 0;
7666 ssh->x11auth = NULL;
7667 ssh->v1_compressing = FALSE;
7668 ssh->v2_outgoing_sequence = 0;
7669 ssh->ssh1_rdpkt_crstate = 0;
7670 ssh->ssh2_rdpkt_crstate = 0;
7671 ssh->do_ssh_init_crstate = 0;
7672 ssh->ssh_gotdata_crstate = 0;
7673 ssh->do_ssh1_connection_crstate = 0;
7674 ssh->do_ssh1_login_crstate = 0;
7675 ssh->do_ssh2_transport_crstate = 0;
7676 ssh->do_ssh2_authconn_crstate = 0;
7677 ssh->do_ssh_init_state = NULL;
7678 ssh->do_ssh1_login_state = NULL;
7679 ssh->do_ssh2_transport_state = NULL;
7680 ssh->do_ssh2_authconn_state = NULL;
7681 ssh->mainchan = NULL;
7682 ssh->throttled_all = 0;
7683 ssh->v1_stdout_throttling = 0;
7685 ssh->queuelen = ssh->queuesize = 0;
7686 ssh->queueing = FALSE;
7687 ssh->qhead = ssh->qtail = NULL;
7688 ssh->deferred_rekey_reason = NULL;
7689 bufchain_init(&ssh->queued_incoming_data);
7690 ssh->frozen = FALSE;
7692 *backend_handle = ssh;
7695 if (crypto_startup() == 0)
7696 return "Microsoft high encryption pack not installed!";
7699 ssh->frontend = frontend_handle;
7700 ssh->term_width = ssh->cfg.width;
7701 ssh->term_height = ssh->cfg.height;
7703 ssh->channels = NULL;
7704 ssh->rportfwds = NULL;
7705 ssh->portfwds = NULL;
7710 ssh->v1_throttle_count = 0;
7711 ssh->overall_bufsize = 0;
7712 ssh->fallback_cmd = 0;
7714 ssh->protocol = NULL;
7716 ssh->protocol_initial_phase_done = FALSE;
7720 ssh->incoming_data_size = ssh->outgoing_data_size =
7721 ssh->deferred_data_size = 0L;
7722 ssh->max_data_size = parse_blocksize(ssh->cfg.ssh_rekey_data);
7723 ssh->kex_in_progress = FALSE;
7725 p = connect_to_host(ssh, host, port, realhost, nodelay, keepalive);
7734 static void ssh_free(void *handle)
7736 Ssh ssh = (Ssh) handle;
7737 struct ssh_channel *c;
7738 struct ssh_rportfwd *pf;
7740 if (ssh->v1_cipher_ctx)
7741 ssh->cipher->free_context(ssh->v1_cipher_ctx);
7742 if (ssh->cs_cipher_ctx)
7743 ssh->cscipher->free_context(ssh->cs_cipher_ctx);
7744 if (ssh->sc_cipher_ctx)
7745 ssh->sccipher->free_context(ssh->sc_cipher_ctx);
7746 if (ssh->cs_mac_ctx)
7747 ssh->csmac->free_context(ssh->cs_mac_ctx);
7748 if (ssh->sc_mac_ctx)
7749 ssh->scmac->free_context(ssh->sc_mac_ctx);
7750 if (ssh->cs_comp_ctx) {
7752 ssh->cscomp->compress_cleanup(ssh->cs_comp_ctx);
7754 zlib_compress_cleanup(ssh->cs_comp_ctx);
7756 if (ssh->sc_comp_ctx) {
7758 ssh->sccomp->decompress_cleanup(ssh->sc_comp_ctx);
7760 zlib_decompress_cleanup(ssh->sc_comp_ctx);
7763 dh_cleanup(ssh->kex_ctx);
7764 sfree(ssh->savedhost);
7766 while (ssh->queuelen-- > 0)
7767 ssh_free_packet(ssh->queue[ssh->queuelen]);
7770 while (ssh->qhead) {
7771 struct queued_handler *qh = ssh->qhead;
7772 ssh->qhead = qh->next;
7775 ssh->qhead = ssh->qtail = NULL;
7777 if (ssh->channels) {
7778 while ((c = delpos234(ssh->channels, 0)) != NULL) {
7781 if (c->u.x11.s != NULL)
7782 x11_close(c->u.x11.s);
7785 if (c->u.pfd.s != NULL)
7786 pfd_close(c->u.pfd.s);
7791 freetree234(ssh->channels);
7792 ssh->channels = NULL;
7795 if (ssh->rportfwds) {
7796 while ((pf = delpos234(ssh->rportfwds, 0)) != NULL)
7798 freetree234(ssh->rportfwds);
7799 ssh->rportfwds = NULL;
7801 sfree(ssh->deferred_send_data);
7803 x11_free_auth(ssh->x11auth);
7804 sfree(ssh->do_ssh_init_state);
7805 sfree(ssh->do_ssh1_login_state);
7806 sfree(ssh->do_ssh2_transport_state);
7807 sfree(ssh->do_ssh2_authconn_state);
7808 if (ssh->crcda_ctx) {
7809 crcda_free_context(ssh->crcda_ctx);
7810 ssh->crcda_ctx = NULL;
7813 ssh_do_close(ssh, TRUE);
7814 expire_timer_context(ssh);
7816 pinger_free(ssh->pinger);
7817 bufchain_clear(&ssh->queued_incoming_data);
7824 * Reconfigure the SSH backend.
7826 static void ssh_reconfig(void *handle, Config *cfg)
7828 Ssh ssh = (Ssh) handle;
7829 char *rekeying = NULL, rekey_mandatory = FALSE;
7830 unsigned long old_max_data_size;
7832 pinger_reconfig(ssh->pinger, &ssh->cfg, cfg);
7833 ssh_setup_portfwd(ssh, cfg);
7835 if (ssh->cfg.ssh_rekey_time != cfg->ssh_rekey_time &&
7836 cfg->ssh_rekey_time != 0) {
7837 long new_next = ssh->last_rekey + cfg->ssh_rekey_time*60*TICKSPERSEC;
7838 long now = GETTICKCOUNT();
7840 if (new_next - now < 0) {
7841 rekeying = "timeout shortened";
7843 ssh->next_rekey = schedule_timer(new_next - now, ssh2_timer, ssh);
7847 old_max_data_size = ssh->max_data_size;
7848 ssh->max_data_size = parse_blocksize(cfg->ssh_rekey_data);
7849 if (old_max_data_size != ssh->max_data_size &&
7850 ssh->max_data_size != 0) {
7851 if (ssh->outgoing_data_size > ssh->max_data_size ||
7852 ssh->incoming_data_size > ssh->max_data_size)
7853 rekeying = "data limit lowered";
7856 if (ssh->cfg.compression != cfg->compression) {
7857 rekeying = "compression setting changed";
7858 rekey_mandatory = TRUE;
7861 if (ssh->cfg.ssh2_des_cbc != cfg->ssh2_des_cbc ||
7862 memcmp(ssh->cfg.ssh_cipherlist, cfg->ssh_cipherlist,
7863 sizeof(ssh->cfg.ssh_cipherlist))) {
7864 rekeying = "cipher settings changed";
7865 rekey_mandatory = TRUE;
7868 ssh->cfg = *cfg; /* STRUCTURE COPY */
7871 if (!ssh->kex_in_progress) {
7872 do_ssh2_transport(ssh, rekeying, -1, NULL);
7873 } else if (rekey_mandatory) {
7874 ssh->deferred_rekey_reason = rekeying;
7880 * Called to send data down the Telnet connection.
7882 static int ssh_send(void *handle, char *buf, int len)
7884 Ssh ssh = (Ssh) handle;
7886 if (ssh == NULL || ssh->s == NULL || ssh->protocol == NULL)
7889 ssh->protocol(ssh, (unsigned char *)buf, len, 0);
7891 return ssh_sendbuffer(ssh);
7895 * Called to query the current amount of buffered stdin data.
7897 static int ssh_sendbuffer(void *handle)
7899 Ssh ssh = (Ssh) handle;
7902 if (ssh == NULL || ssh->s == NULL || ssh->protocol == NULL)
7906 * If the SSH socket itself has backed up, add the total backup
7907 * size on that to any individual buffer on the stdin channel.
7910 if (ssh->throttled_all)
7911 override_value = ssh->overall_bufsize;
7913 if (ssh->version == 1) {
7914 return override_value;
7915 } else if (ssh->version == 2) {
7916 if (!ssh->mainchan || ssh->mainchan->closes > 0)
7917 return override_value;
7919 return (override_value +
7920 bufchain_size(&ssh->mainchan->v.v2.outbuffer));
7927 * Called to set the size of the window from SSH's POV.
7929 static void ssh_size(void *handle, int width, int height)
7931 Ssh ssh = (Ssh) handle;
7932 struct Packet *pktout;
7934 ssh->term_width = width;
7935 ssh->term_height = height;
7937 switch (ssh->state) {
7938 case SSH_STATE_BEFORE_SIZE:
7939 case SSH_STATE_PREPACKET:
7940 case SSH_STATE_CLOSED:
7941 break; /* do nothing */
7942 case SSH_STATE_INTERMED:
7943 ssh->size_needed = TRUE; /* buffer for later */
7945 case SSH_STATE_SESSION:
7946 if (!ssh->cfg.nopty) {
7947 if (ssh->version == 1) {
7948 send_packet(ssh, SSH1_CMSG_WINDOW_SIZE,
7949 PKT_INT, ssh->term_height,
7950 PKT_INT, ssh->term_width,
7951 PKT_INT, 0, PKT_INT, 0, PKT_END);
7952 } else if (ssh->mainchan) {
7953 pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
7954 ssh2_pkt_adduint32(pktout, ssh->mainchan->remoteid);
7955 ssh2_pkt_addstring(pktout, "window-change");
7956 ssh2_pkt_addbool(pktout, 0);
7957 ssh2_pkt_adduint32(pktout, ssh->term_width);
7958 ssh2_pkt_adduint32(pktout, ssh->term_height);
7959 ssh2_pkt_adduint32(pktout, 0);
7960 ssh2_pkt_adduint32(pktout, 0);
7961 ssh2_pkt_send(ssh, pktout);
7969 * Return a list of the special codes that make sense in this
7972 static const struct telnet_special *ssh_get_specials(void *handle)
7974 static const struct telnet_special ssh1_ignore_special[] = {
7975 {"IGNORE message", TS_NOP}
7977 static const struct telnet_special ssh2_transport_specials[] = {
7978 {"IGNORE message", TS_NOP},
7979 {"Repeat key exchange", TS_REKEY},
7981 static const struct telnet_special ssh2_session_specials[] = {
7984 /* These are the signal names defined by draft-ietf-secsh-connect-23.
7985 * They include all the ISO C signals, but are a subset of the POSIX
7986 * required signals. */
7987 {"SIGINT (Interrupt)", TS_SIGINT},
7988 {"SIGTERM (Terminate)", TS_SIGTERM},
7989 {"SIGKILL (Kill)", TS_SIGKILL},
7990 {"SIGQUIT (Quit)", TS_SIGQUIT},
7991 {"SIGHUP (Hangup)", TS_SIGHUP},
7992 {"More signals", TS_SUBMENU},
7993 {"SIGABRT", TS_SIGABRT}, {"SIGALRM", TS_SIGALRM},
7994 {"SIGFPE", TS_SIGFPE}, {"SIGILL", TS_SIGILL},
7995 {"SIGPIPE", TS_SIGPIPE}, {"SIGSEGV", TS_SIGSEGV},
7996 {"SIGUSR1", TS_SIGUSR1}, {"SIGUSR2", TS_SIGUSR2},
7999 static const struct telnet_special specials_end[] = {
8002 /* XXX review this length for any changes: */
8003 static struct telnet_special ssh_specials[lenof(ssh2_transport_specials) +
8004 lenof(ssh2_session_specials) +
8005 lenof(specials_end)];
8006 Ssh ssh = (Ssh) handle;
8008 #define ADD_SPECIALS(name) \
8010 assert((i + lenof(name)) <= lenof(ssh_specials)); \
8011 memcpy(&ssh_specials[i], name, sizeof name); \
8015 if (ssh->version == 1) {
8016 /* Don't bother offering IGNORE if we've decided the remote
8017 * won't cope with it, since we wouldn't bother sending it if
8019 if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE))
8020 ADD_SPECIALS(ssh1_ignore_special);
8021 } else if (ssh->version == 2) {
8022 ADD_SPECIALS(ssh2_transport_specials);
8024 ADD_SPECIALS(ssh2_session_specials);
8025 } /* else we're not ready yet */
8028 ADD_SPECIALS(specials_end);
8029 return ssh_specials;
8037 * Send Telnet special codes. TS_EOF is useful for `plink', so you
8038 * can send an EOF and collect resulting output (e.g. `plink
8041 static void ssh_special(void *handle, Telnet_Special code)
8043 Ssh ssh = (Ssh) handle;
8044 struct Packet *pktout;
8046 if (code == TS_EOF) {
8047 if (ssh->state != SSH_STATE_SESSION) {
8049 * Buffer the EOF in case we are pre-SESSION, so we can
8050 * send it as soon as we reach SESSION.
8053 ssh->eof_needed = TRUE;
8056 if (ssh->version == 1) {
8057 send_packet(ssh, SSH1_CMSG_EOF, PKT_END);
8058 } else if (ssh->mainchan) {
8059 struct Packet *pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_EOF);
8060 ssh2_pkt_adduint32(pktout, ssh->mainchan->remoteid);
8061 ssh2_pkt_send(ssh, pktout);
8062 ssh->send_ok = 0; /* now stop trying to read from stdin */
8064 logevent("Sent EOF message");
8065 } else if (code == TS_PING || code == TS_NOP) {
8066 if (ssh->state == SSH_STATE_CLOSED
8067 || ssh->state == SSH_STATE_PREPACKET) return;
8068 if (ssh->version == 1) {
8069 if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE))
8070 send_packet(ssh, SSH1_MSG_IGNORE, PKT_STR, "", PKT_END);
8072 pktout = ssh2_pkt_init(SSH2_MSG_IGNORE);
8073 ssh2_pkt_addstring_start(pktout);
8074 ssh2_pkt_send_noqueue(ssh, pktout);
8076 } else if (code == TS_REKEY) {
8077 if (!ssh->kex_in_progress && ssh->version == 2) {
8078 do_ssh2_transport(ssh, "at user request", -1, NULL);
8080 } else if (code == TS_BRK) {
8081 if (ssh->state == SSH_STATE_CLOSED
8082 || ssh->state == SSH_STATE_PREPACKET) return;
8083 if (ssh->version == 1) {
8084 logevent("Unable to send BREAK signal in SSH-1");
8085 } else if (ssh->mainchan) {
8086 pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
8087 ssh2_pkt_adduint32(pktout, ssh->mainchan->remoteid);
8088 ssh2_pkt_addstring(pktout, "break");
8089 ssh2_pkt_addbool(pktout, 0);
8090 ssh2_pkt_adduint32(pktout, 0); /* default break length */
8091 ssh2_pkt_send(ssh, pktout);
8094 /* Is is a POSIX signal? */
8095 char *signame = NULL;
8096 if (code == TS_SIGABRT) signame = "ABRT";
8097 if (code == TS_SIGALRM) signame = "ALRM";
8098 if (code == TS_SIGFPE) signame = "FPE";
8099 if (code == TS_SIGHUP) signame = "HUP";
8100 if (code == TS_SIGILL) signame = "ILL";
8101 if (code == TS_SIGINT) signame = "INT";
8102 if (code == TS_SIGKILL) signame = "KILL";
8103 if (code == TS_SIGPIPE) signame = "PIPE";
8104 if (code == TS_SIGQUIT) signame = "QUIT";
8105 if (code == TS_SIGSEGV) signame = "SEGV";
8106 if (code == TS_SIGTERM) signame = "TERM";
8107 if (code == TS_SIGUSR1) signame = "USR1";
8108 if (code == TS_SIGUSR2) signame = "USR2";
8109 /* The SSH-2 protocol does in principle support arbitrary named
8110 * signals, including signame@domain, but we don't support those. */
8112 /* It's a signal. */
8113 if (ssh->version == 2 && ssh->mainchan) {
8114 pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
8115 ssh2_pkt_adduint32(pktout, ssh->mainchan->remoteid);
8116 ssh2_pkt_addstring(pktout, "signal");
8117 ssh2_pkt_addbool(pktout, 0);
8118 ssh2_pkt_addstring(pktout, signame);
8119 ssh2_pkt_send(ssh, pktout);
8120 logeventf(ssh, "Sent signal SIG%s", signame);
8123 /* Never heard of it. Do nothing */
8128 void *new_sock_channel(void *handle, Socket s)
8130 Ssh ssh = (Ssh) handle;
8131 struct ssh_channel *c;
8132 c = snew(struct ssh_channel);
8137 c->localid = alloc_channel_id(ssh);
8139 c->type = CHAN_SOCKDATA_DORMANT;/* identify channel type */
8141 bufchain_init(&c->v.v2.outbuffer);
8142 add234(ssh->channels, c);
8148 * This is called when stdout/stderr (the entity to which
8149 * from_backend sends data) manages to clear some backlog.
8151 static void ssh_unthrottle(void *handle, int bufsize)
8153 Ssh ssh = (Ssh) handle;
8154 if (ssh->version == 1) {
8155 if (ssh->v1_stdout_throttling && bufsize < SSH1_BUFFER_LIMIT) {
8156 ssh->v1_stdout_throttling = 0;
8157 ssh1_throttle(ssh, -1);
8160 if (ssh->mainchan && ssh->mainchan->closes == 0)
8161 ssh2_set_window(ssh->mainchan, OUR_V2_WINSIZE - bufsize);
8165 void ssh_send_port_open(void *channel, char *hostname, int port, char *org)
8167 struct ssh_channel *c = (struct ssh_channel *)channel;
8169 struct Packet *pktout;
8171 logeventf(ssh, "Opening forwarded connection to %s:%d", hostname, port);
8173 if (ssh->version == 1) {
8174 send_packet(ssh, SSH1_MSG_PORT_OPEN,
8175 PKT_INT, c->localid,
8178 /* PKT_STR, <org:orgport>, */
8181 pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN);
8182 ssh2_pkt_addstring(pktout, "direct-tcpip");
8183 ssh2_pkt_adduint32(pktout, c->localid);
8184 c->v.v2.locwindow = OUR_V2_WINSIZE;
8185 ssh2_pkt_adduint32(pktout, c->v.v2.locwindow);/* our window size */
8186 ssh2_pkt_adduint32(pktout, OUR_V2_MAXPKT); /* our max pkt size */
8187 ssh2_pkt_addstring(pktout, hostname);
8188 ssh2_pkt_adduint32(pktout, port);
8190 * We make up values for the originator data; partly it's
8191 * too much hassle to keep track, and partly I'm not
8192 * convinced the server should be told details like that
8193 * about my local network configuration.
8195 ssh2_pkt_addstring(pktout, "client-side-connection");
8196 ssh2_pkt_adduint32(pktout, 0);
8197 ssh2_pkt_send(ssh, pktout);
8201 static Socket ssh_socket(void *handle)
8203 Ssh ssh = (Ssh) handle;
8207 static int ssh_sendok(void *handle)
8209 Ssh ssh = (Ssh) handle;
8210 return ssh->send_ok;
8213 static int ssh_ldisc(void *handle, int option)
8215 Ssh ssh = (Ssh) handle;
8216 if (option == LD_ECHO)
8217 return ssh->echoing;
8218 if (option == LD_EDIT)
8219 return ssh->editing;
8223 static void ssh_provide_ldisc(void *handle, void *ldisc)
8225 Ssh ssh = (Ssh) handle;
8229 static void ssh_provide_logctx(void *handle, void *logctx)
8231 Ssh ssh = (Ssh) handle;
8232 ssh->logctx = logctx;
8235 static int ssh_return_exitcode(void *handle)
8237 Ssh ssh = (Ssh) handle;
8241 return (ssh->exitcode >= 0 ? ssh->exitcode : 0);
8245 * cfg_info for SSH is the currently running version of the
8246 * protocol. (1 for 1; 2 for 2; 0 for not-decided-yet.)
8248 static int ssh_cfg_info(void *handle)
8250 Ssh ssh = (Ssh) handle;
8251 return ssh->version;
8255 * Gross hack: pscp will try to start SFTP but fall back to scp1 if
8256 * that fails. This variable is the means by which scp.c can reach
8257 * into the SSH code and find out which one it got.
8259 extern int ssh_fallback_cmd(void *handle)
8261 Ssh ssh = (Ssh) handle;
8262 return ssh->fallback_cmd;
8265 Backend ssh_backend = {
8275 ssh_return_exitcode,