/* $Id: resizeconsts.h,v 1.1 2005/05/15 09:06:04 admin Exp $ */
/*******************************************************************************
    Copyright (c) 2004, Alexander R. Pruss
    All rights reserved.

    Redistribution and use in source and binary forms, with or without modification,
    are permitted provided that the following conditions are met:

        Redistributions of source code must retain the above copyright notice, this
        list of conditions and the following disclaimer.

        Redistributions in binary form must reproduce the above copyright notice, this
        list of conditions and the following disclaimer in the documentation and/or
        other materials provided with the distribution.

        Neither the name of the PalmResize Project nor the names of its
        contributors may be used to endorse or promote products derived from this
        software without specific prior written permission.

    THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
    ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
    WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
    DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
    ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
    (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
    LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
    ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
    SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/

/* Object attribute flags */

#define DIA_MASK_X   15 /* 0x000F */
#define DIA_MASK_Y   240 /* 0x00F0 */
#define DIA_MASK_W   1792 /* 0x0700 */
#define DIA_MASK_H   28672 /* 0x7000 */

#define DIA_SHIFT_X   0
#define DIA_SHIFT_Y   4
#define DIA_SHIFT_W   8
#define DIA_SHIFT_H  12

#define DIA_X_FIX    0 /* 0x0000 */
#define DIA_Y_FIX    0 /* 0x0000 */
#define DIA_W_FIX    0 /* 0x0000 */
#define DIA_H_FIX    0 /* 0x0000 */

#define DIA_X_RATIO  7 /* 0x0007 */
#define DIA_Y_RATIO  112 /* 0x0070 */
#define DIA_W_RATIO  1792 /* 0x0700 */
#define DIA_H_RATIO  28672 /* 0x7000 */

#define DIA_X_RIGHT  8 /* 0x0008 */
#define DIA_Y_BOTTOM 128 /* 0x0080 */

#define DIA_X_PLUS_DW 1 /* 0x0001 */
#define DIA_Y_PLUS_DH 16 /* 0x0010 */
#define DIA_W_PLUS_DW 256 /* 0x0100 */
#define DIA_H_PLUS_DH 4096 /* 0x1000 */

#define DIA_X_PLUS_1_2_DW 2 /* 0x0002 */
#define DIA_Y_PLUS_1_2_DH 32 /* 0x0020 */
#define DIA_W_PLUS_1_2_DW 512 /* 0x0200 */
#define DIA_H_PLUS_1_2_DH 8192 /* 0x2000 */

#define DIA_X_PLUS_1_3_DW 3 /* 0x0003 */
#define DIA_Y_PLUS_1_3_DH 48 /* 0x0030 */
#define DIA_W_PLUS_1_3_DW 768 /* 0x0300 */
#define DIA_H_PLUS_1_3_DH 12288 /* 0x3000 */

#define DIA_X_PLUS_2_3_DW 4 /* 0x0004 */
#define DIA_Y_PLUS_2_3_DH 64 /* 0x0040 */
#define DIA_W_PLUS_2_3_DW 1024 /* 0x0400 */
#define DIA_H_PLUS_2_3_DH 16384 /* 0x4000 */

#define DIA_X_PLUS_1_4_DW 5 /* 0x0005 */
#define DIA_Y_PLUS_1_4_DH 80 /* 0x0050 */
#define DIA_W_PLUS_1_4_DW 1280 /* 0x0500 */
#define DIA_H_PLUS_1_4_DH 20480 /* 0x5000 */

#define DIA_X_PLUS_3_4_DW 6 /* 0x0006 */
#define DIA_Y_PLUS_3_4_DH 96 /* 0x0060 */
#define DIA_W_PLUS_3_4_DW 1536 /* 0x0600 */
#define DIA_H_PLUS_3_4_DH 24576 /* 0x6000 */

#define DIA_H_GRANULAR  32768 /* 0x8000 */

/* Form attribute flags */

/* Try to keep the same DIA state as in previous form */
#define DIA_FORM_KEEP_LAST         1
/* Keep the same DIA state as previous form using the same bin */
/* If DIA_FORM_KEEP_LAST and DIA_FORM_USE_BIN are both set, then
   we keep last DIA state to get the initial DIA state for the bin
   the first time a form from that bin is used. */
#define DIA_FORM_USE_BIN           2
/* Disable DIA state change */
#define DIA_FORM_NO_RESIZE         4
/* Handera-specific form */
#define DIA_FORM_HANDERA           8


#define STD_EXTENT_X        160
#define STD_EXTENT_Y        160

#define MAX_EXTENT_X        4096
#define MAX_EXTENT_Y        4096

#define DIA_STATE_MAX        0
#define DIA_STATE_MIN        1
#define DIA_STATE_NO_STATUS_BAR  2
#define DIA_STATE_UNDEFINED   255

/* No actual objects are allowed to use these--they are used within resize config info */
#define GSI_OBJECT_ID   65280 /* 0xFF00 */