+/*
+ * SSH backend.
+ */
+
#include <stdio.h>
#include <stdlib.h>
#include <stdarg.h>
#include <assert.h>
+#include <limits.h>
+#include <signal.h>
#include "putty.h"
#include "tree234.h"
#include "ssh.h"
+#ifndef NO_GSSAPI
+#include "sshgssc.h"
+#include "sshgss.h"
+#endif
#ifndef FALSE
#define FALSE 0
#define SSH1_SMSG_AUTH_CCARD_CHALLENGE 71 /* 0x47 */
#define SSH1_CMSG_AUTH_CCARD_RESPONSE 72 /* 0x48 */
+#define SSH1_AUTH_RHOSTS 1 /* 0x1 */
+#define SSH1_AUTH_RSA 2 /* 0x2 */
+#define SSH1_AUTH_PASSWORD 3 /* 0x3 */
+#define SSH1_AUTH_RHOSTS_RSA 4 /* 0x4 */
#define SSH1_AUTH_TIS 5 /* 0x5 */
#define SSH1_AUTH_CCARD 16 /* 0x10 */
#define SSH2_MSG_KEX_DH_GEX_GROUP 31 /* 0x1f */
#define SSH2_MSG_KEX_DH_GEX_INIT 32 /* 0x20 */
#define SSH2_MSG_KEX_DH_GEX_REPLY 33 /* 0x21 */
+#define SSH2_MSG_KEXRSA_PUBKEY 30 /* 0x1e */
+#define SSH2_MSG_KEXRSA_SECRET 31 /* 0x1f */
+#define SSH2_MSG_KEXRSA_DONE 32 /* 0x20 */
#define SSH2_MSG_USERAUTH_REQUEST 50 /* 0x32 */
#define SSH2_MSG_USERAUTH_FAILURE 51 /* 0x33 */
#define SSH2_MSG_USERAUTH_SUCCESS 52 /* 0x34 */
#define SSH2_MSG_CHANNEL_REQUEST 98 /* 0x62 */
#define SSH2_MSG_CHANNEL_SUCCESS 99 /* 0x63 */
#define SSH2_MSG_CHANNEL_FAILURE 100 /* 0x64 */
+#define SSH2_MSG_USERAUTH_GSSAPI_RESPONSE 60
+#define SSH2_MSG_USERAUTH_GSSAPI_TOKEN 61
+#define SSH2_MSG_USERAUTH_GSSAPI_EXCHANGE_COMPLETE 63
+#define SSH2_MSG_USERAUTH_GSSAPI_ERROR 64
+#define SSH2_MSG_USERAUTH_GSSAPI_ERRTOK 65
+#define SSH2_MSG_USERAUTH_GSSAPI_MIC 66
/*
* Packet type contexts, so that ssh2_pkt_type can correctly decode
* the ambiguous type numbers back into the correct type strings.
*/
-#define SSH2_PKTCTX_DHGROUP 0x0001
-#define SSH2_PKTCTX_DHGEX 0x0002
-#define SSH2_PKTCTX_KEX_MASK 0x000F
-#define SSH2_PKTCTX_PUBLICKEY 0x0010
-#define SSH2_PKTCTX_PASSWORD 0x0020
-#define SSH2_PKTCTX_KBDINTER 0x0040
-#define SSH2_PKTCTX_AUTH_MASK 0x00F0
+typedef enum {
+ SSH2_PKTCTX_NOKEX,
+ SSH2_PKTCTX_DHGROUP,
+ SSH2_PKTCTX_DHGEX,
+ SSH2_PKTCTX_RSAKEX
+} Pkt_KCtx;
+typedef enum {
+ SSH2_PKTCTX_NOAUTH,
+ SSH2_PKTCTX_PUBLICKEY,
+ SSH2_PKTCTX_PASSWORD,
+ SSH2_PKTCTX_GSSAPI,
+ SSH2_PKTCTX_KBDINTER
+} Pkt_ACtx;
#define SSH2_DISCONNECT_HOST_NOT_ALLOWED_TO_CONNECT 1 /* 0x1 */
#define SSH2_DISCONNECT_PROTOCOL_ERROR 2 /* 0x2 */
#define BUG_SSH2_DERIVEKEY 32
#define BUG_SSH2_REKEY 64
#define BUG_SSH2_PK_SESSIONID 128
+#define BUG_SSH2_MAXPKT 256
+#define BUG_CHOKES_ON_SSH2_IGNORE 512
+#define BUG_CHOKES_ON_WINADJ 1024
/*
* Codes for terminal modes.
* Most of these are the same in SSH-1 and SSH-2.
- * This list is derived from draft-ietf-secsh-connect-25 and
+ * This list is derived from RFC 4254 and
* SSH-1 RFC-1.2.31.
*/
static const struct {
}
#define translate(x) if (type == x) return #x
-#define translatec(x,ctx) if (type == x && (pkt_ctx & ctx)) return #x
+#define translatek(x,ctx) if (type == x && (pkt_kctx == ctx)) return #x
+#define translatea(x,ctx) if (type == x && (pkt_actx == ctx)) return #x
static char *ssh1_pkt_type(int type)
{
translate(SSH1_MSG_DISCONNECT);
translate(SSH1_CMSG_AUTH_CCARD_RESPONSE);
return "unknown";
}
-static char *ssh2_pkt_type(int pkt_ctx, int type)
+static char *ssh2_pkt_type(Pkt_KCtx pkt_kctx, Pkt_ACtx pkt_actx, int type)
{
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_RESPONSE,SSH2_PKTCTX_GSSAPI);
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_TOKEN,SSH2_PKTCTX_GSSAPI);
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_EXCHANGE_COMPLETE,SSH2_PKTCTX_GSSAPI);
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_ERROR,SSH2_PKTCTX_GSSAPI);
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_ERRTOK,SSH2_PKTCTX_GSSAPI);
+ translatea(SSH2_MSG_USERAUTH_GSSAPI_MIC, SSH2_PKTCTX_GSSAPI);
translate(SSH2_MSG_DISCONNECT);
translate(SSH2_MSG_IGNORE);
translate(SSH2_MSG_UNIMPLEMENTED);
translate(SSH2_MSG_SERVICE_ACCEPT);
translate(SSH2_MSG_KEXINIT);
translate(SSH2_MSG_NEWKEYS);
- translatec(SSH2_MSG_KEXDH_INIT, SSH2_PKTCTX_DHGROUP);
- translatec(SSH2_MSG_KEXDH_REPLY, SSH2_PKTCTX_DHGROUP);
- translatec(SSH2_MSG_KEX_DH_GEX_REQUEST, SSH2_PKTCTX_DHGEX);
- translatec(SSH2_MSG_KEX_DH_GEX_GROUP, SSH2_PKTCTX_DHGEX);
- translatec(SSH2_MSG_KEX_DH_GEX_INIT, SSH2_PKTCTX_DHGEX);
- translatec(SSH2_MSG_KEX_DH_GEX_REPLY, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEXDH_INIT, SSH2_PKTCTX_DHGROUP);
+ translatek(SSH2_MSG_KEXDH_REPLY, SSH2_PKTCTX_DHGROUP);
+ translatek(SSH2_MSG_KEX_DH_GEX_REQUEST, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEX_DH_GEX_GROUP, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEX_DH_GEX_INIT, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEX_DH_GEX_REPLY, SSH2_PKTCTX_DHGEX);
+ translatek(SSH2_MSG_KEXRSA_PUBKEY, SSH2_PKTCTX_RSAKEX);
+ translatek(SSH2_MSG_KEXRSA_SECRET, SSH2_PKTCTX_RSAKEX);
+ translatek(SSH2_MSG_KEXRSA_DONE, SSH2_PKTCTX_RSAKEX);
translate(SSH2_MSG_USERAUTH_REQUEST);
translate(SSH2_MSG_USERAUTH_FAILURE);
translate(SSH2_MSG_USERAUTH_SUCCESS);
translate(SSH2_MSG_USERAUTH_BANNER);
- translatec(SSH2_MSG_USERAUTH_PK_OK, SSH2_PKTCTX_PUBLICKEY);
- translatec(SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ, SSH2_PKTCTX_PASSWORD);
- translatec(SSH2_MSG_USERAUTH_INFO_REQUEST, SSH2_PKTCTX_KBDINTER);
- translatec(SSH2_MSG_USERAUTH_INFO_RESPONSE, SSH2_PKTCTX_KBDINTER);
+ translatea(SSH2_MSG_USERAUTH_PK_OK, SSH2_PKTCTX_PUBLICKEY);
+ translatea(SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ, SSH2_PKTCTX_PASSWORD);
+ translatea(SSH2_MSG_USERAUTH_INFO_REQUEST, SSH2_PKTCTX_KBDINTER);
+ translatea(SSH2_MSG_USERAUTH_INFO_RESPONSE, SSH2_PKTCTX_KBDINTER);
translate(SSH2_MSG_GLOBAL_REQUEST);
translate(SSH2_MSG_REQUEST_SUCCESS);
translate(SSH2_MSG_REQUEST_FAILURE);
* Database for Edit and Continue'.
*/
#define crBegin(v) { int *crLine = &v; switch(v) { case 0:;
-#define crState(t) \
- struct t *s; \
- if (!ssh->t) ssh->t = snew(struct t); \
- s = ssh->t;
+#define crBeginState crBegin(s->crLine)
+#define crStateP(t, v) \
+ struct t *s; \
+ if (!(v)) { s = (v) = snew(struct t); s->crLine = 0; } \
+ s = (v);
+#define crState(t) crStateP(t, ssh->t)
#define crFinish(z) } *crLine = 0; return (z); }
#define crFinishV } *crLine = 0; return; }
+#define crFinishFree(z) } sfree(s); return (z); }
+#define crFinishFreeV } sfree(s); return; }
#define crReturn(z) \
do {\
*crLine =__LINE__; return (z); case __LINE__:;\
static struct Packet *ssh1_pkt_init(int pkt_type);
static struct Packet *ssh2_pkt_init(int pkt_type);
static void ssh_pkt_ensure(struct Packet *, int length);
-static void ssh_pkt_adddata(struct Packet *, void *data, int len);
+static void ssh_pkt_adddata(struct Packet *, const void *data, int len);
static void ssh_pkt_addbyte(struct Packet *, unsigned char value);
static void ssh2_pkt_addbool(struct Packet *, unsigned char value);
static void ssh_pkt_adduint32(struct Packet *, unsigned long value);
static void ssh_pkt_addstring_start(struct Packet *);
-static void ssh_pkt_addstring_str(struct Packet *, char *data);
-static void ssh_pkt_addstring_data(struct Packet *, char *data, int len);
-static void ssh_pkt_addstring(struct Packet *, char *data);
+static void ssh_pkt_addstring_str(struct Packet *, const char *data);
+static void ssh_pkt_addstring_data(struct Packet *, const char *data, int len);
+static void ssh_pkt_addstring(struct Packet *, const char *data);
static unsigned char *ssh2_mpint_fmt(Bignum b, int *len);
static void ssh1_pkt_addmp(struct Packet *, Bignum b);
static void ssh2_pkt_addmp(struct Packet *, Bignum b);
struct Packet *pktin);
static void do_ssh2_authconn(Ssh ssh, unsigned char *in, int inlen,
struct Packet *pktin);
+static void ssh2_channel_check_close(struct ssh_channel *c);
+static void ssh_channel_destroy(struct ssh_channel *c);
/*
* Buffer management constants. There are several of these for
*
* - OUR_V2_WINSIZE is the maximum window size we present on SSH-2
* channels.
+ *
+ * - OUR_V2_BIGWIN is the window size we advertise for the only
+ * channel in a simple connection. It must be <= INT_MAX.
+ *
+ * - OUR_V2_MAXPKT is the official "maximum packet size" we send
+ * to the remote side. This actually has nothing to do with the
+ * size of the _packet_, but is instead a limit on the amount
+ * of data we're willing to receive in a single SSH2 channel
+ * data message.
+ *
+ * - OUR_V2_PACKETLIMIT is actually the maximum size of SSH
+ * _packet_ we're prepared to cope with. It must be a multiple
+ * of the cipher block size, and must be at least 35000.
*/
#define SSH1_BUFFER_LIMIT 32768
#define SSH_MAX_BACKLOG 32768
#define OUR_V2_WINSIZE 16384
+#define OUR_V2_BIGWIN 0x7fffffff
#define OUR_V2_MAXPKT 0x4000UL
+#define OUR_V2_PACKETLIMIT 0x9000UL
const static struct ssh_signkey *hostkey_algs[] = { &ssh_rsa, &ssh_dss };
const static struct ssh_mac *macs[] = {
- &ssh_hmac_sha1, &ssh_hmac_sha1_96, &ssh_hmac_md5
+ &ssh_hmac_sha256, &ssh_hmac_sha1, &ssh_hmac_sha1_96, &ssh_hmac_md5
};
const static struct ssh_mac *buggymacs[] = {
&ssh_hmac_sha1_buggy, &ssh_hmac_sha1_96_buggy, &ssh_hmac_md5
return 0;
}
const static struct ssh_compress ssh_comp_none = {
- "none",
+ "none", NULL,
ssh_comp_none_init, ssh_comp_none_cleanup, ssh_comp_none_block,
ssh_comp_none_init, ssh_comp_none_cleanup, ssh_comp_none_block,
ssh_comp_none_disable, NULL
CHAN_X11,
CHAN_AGENT,
CHAN_SOCKDATA,
- CHAN_SOCKDATA_DORMANT /* one the remote hasn't confirmed */
+ CHAN_SOCKDATA_DORMANT, /* one the remote hasn't confirmed */
+ /*
+ * CHAN_ZOMBIE is used to indicate a channel for which we've
+ * already destroyed the local data source: for instance, if a
+ * forwarded port experiences a socket error on the local side, we
+ * immediately destroy its local socket and turn the SSH channel
+ * into CHAN_ZOMBIE.
+ */
+ CHAN_ZOMBIE
+};
+
+typedef void (*handler_fn_t)(Ssh ssh, struct Packet *pktin);
+typedef void (*chandler_fn_t)(Ssh ssh, struct Packet *pktin, void *ctx);
+typedef void (*cchandler_fn_t)(struct ssh_channel *, struct Packet *, void *);
+
+/*
+ * Each channel has a queue of outstanding CHANNEL_REQUESTS and their
+ * handlers.
+ */
+struct outstanding_channel_request {
+ cchandler_fn_t handler;
+ void *ctx;
+ struct outstanding_channel_request *next;
};
/*
* 8 We have received SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION.
*
* A channel is completely finished with when all four bits are set.
+ *
+ * In SSH-2, the four bits mean:
+ *
+ * 1 We have sent SSH2_MSG_CHANNEL_EOF.
+ * 2 We have sent SSH2_MSG_CHANNEL_CLOSE.
+ * 4 We have received SSH2_MSG_CHANNEL_EOF.
+ * 8 We have received SSH2_MSG_CHANNEL_CLOSE.
+ *
+ * A channel is completely finished with when we have both sent
+ * and received CLOSE.
+ *
+ * The symbolic constants below use the SSH-2 terminology, which
+ * is a bit confusing in SSH-1, but we have to use _something_.
*/
+#define CLOSES_SENT_EOF 1
+#define CLOSES_SENT_CLOSE 2
+#define CLOSES_RCVD_EOF 4
+#define CLOSES_RCVD_CLOSE 8
int closes;
+
+ /*
+ * This flag indicates that an EOF is pending on the outgoing side
+ * of the channel: that is, wherever we're getting the data for
+ * this channel has sent us some data followed by EOF. We can't
+ * actually send the EOF until we've finished sending the data, so
+ * we set this flag instead to remind us to do so once our buffer
+ * is clear.
+ */
+ int pending_eof;
+
+ /*
+ * True if this channel is causing the underlying connection to be
+ * throttled.
+ */
+ int throttling_conn;
union {
- struct ssh1_data_channel {
- int throttling;
- } v1;
struct ssh2_data_channel {
bufchain outbuffer;
unsigned remwindow, remmaxpkt;
- unsigned locwindow;
+ /* locwindow is signed so we can cope with excess data. */
+ int locwindow, locmaxwin;
+ /*
+ * remlocwin is the amount of local window that we think
+ * the remote end had available to it after it sent the
+ * last data packet or window adjust ack.
+ */
+ int remlocwin;
+ /*
+ * These store the list of channel requests that haven't
+ * been acked.
+ */
+ struct outstanding_channel_request *chanreq_head, *chanreq_tail;
+ enum { THROTTLED, UNTHROTTLING, UNTHROTTLED } throttle_state;
} v2;
} v;
union {
unsigned char *message;
unsigned char msglen[4];
unsigned lensofar, totallen;
+ int outstanding_requests;
} a;
struct ssh_x11_channel {
Socket s;
static int ssh2_try_send(struct ssh_channel *c);
static void ssh2_add_channel_data(struct ssh_channel *c, char *buf, int len);
static void ssh_throttle_all(Ssh ssh, int enable, int bufsize);
-static void ssh2_set_window(struct ssh_channel *c, unsigned newwin);
+static void ssh2_set_window(struct ssh_channel *c, int newwin);
static int ssh_sendbuffer(void *handle);
static int ssh_do_close(Ssh ssh, int notify_exit);
static unsigned long ssh_pkt_getuint32(struct Packet *pkt);
static int ssh2_pkt_getbool(struct Packet *pkt);
static void ssh_pkt_getstring(struct Packet *pkt, char **p, int *length);
-static void ssh2_timer(void *ctx, long now);
-static int do_ssh2_transport(Ssh ssh, void *vin, int inlen,
- struct Packet *pktin);
+static void ssh2_timer(void *ctx, unsigned long now);
+static void do_ssh2_transport(Ssh ssh, void *vin, int inlen,
+ struct Packet *pktin);
+static void ssh2_msg_unexpected(Ssh ssh, struct Packet *pktin);
struct rdpkt1_state_tag {
long len, pad, biglen, to_read;
struct Packet *pktin;
};
-typedef void (*handler_fn_t)(Ssh ssh, struct Packet *pktin);
-typedef void (*chandler_fn_t)(Ssh ssh, struct Packet *pktin, void *ctx);
-
struct queued_handler;
struct queued_handler {
int msg1, msg2;
void *cs_comp_ctx, *sc_comp_ctx;
const struct ssh_kex *kex;
const struct ssh_signkey *hostkey;
- unsigned char v2_session_id[32];
+ unsigned char v2_session_id[SSH2_KEX_MAX_HASH_LEN];
int v2_session_id_len;
void *kex_ctx;
tree234 *channels; /* indexed by local id */
struct ssh_channel *mainchan; /* primary session channel */
+ int ncmode; /* is primary channel direct-tcpip? */
int exitcode;
int close_expected;
int clean_exit;
} state;
int size_needed, eof_needed;
+ int sent_console_eof;
+ int got_pty; /* affects EOF behaviour on main channel */
struct Packet **queue;
int queuelen, queuesize;
int fallback_cmd;
bufchain banner; /* accumulates banners during do_ssh2_authconn */
- /*
- * Used for username and password input.
- */
- char *userpass_input_buffer;
- int userpass_input_buflen;
- int userpass_input_bufpos;
- int userpass_input_echo;
- int pkt_ctx;
+ Pkt_KCtx pkt_kctx;
+ Pkt_ACtx pkt_actx;
- void *x11auth;
+ struct X11Display *x11disp;
int version;
- int v1_throttle_count;
+ int conn_throttle_count;
int overall_bufsize;
int throttled_all;
int v1_stdout_throttling;
int ssh1_rdpkt_crstate;
int ssh2_rdpkt_crstate;
- int do_ssh_init_crstate;
int ssh_gotdata_crstate;
- int do_ssh1_login_crstate;
int do_ssh1_connection_crstate;
- int do_ssh2_transport_crstate;
- int do_ssh2_authconn_crstate;
void *do_ssh_init_state;
void *do_ssh1_login_state;
struct Packet *(*s_rdpkt) (Ssh ssh, unsigned char **data, int *datalen);
/*
- * We maintain a full _copy_ of a Config structure here, not
- * merely a pointer to it. That way, when we're passed a new
- * one for reconfiguration, we can check the differences and
- * potentially reconfigure port forwardings etc in mid-session.
+ * We maintain our own copy of a Conf structure here. That way,
+ * when we're passed a new one for reconfiguration, we can check
+ * the differences and potentially reconfigure port forwardings
+ * etc in mid-session.
+ */
+ Conf *conf;
+
+ /*
+ * Values cached out of conf so as to avoid the tree234 lookup
+ * cost every time they're used.
*/
- Config cfg;
+ int logomitdata;
+
+ /*
+ * Dynamically allocated username string created during SSH
+ * login. Stored in here rather than in the coroutine state so
+ * that it'll be reliably freed if we shut down the SSH session
+ * at some unexpected moment.
+ */
+ char *username;
/*
* Used to transfer data back from async callbacks.
* indications from a request.
*/
struct queued_handler *qhead, *qtail;
+ handler_fn_t q_saved_handler1, q_saved_handler2;
/*
* This module deals with sending keepalives.
unsigned long incoming_data_size, outgoing_data_size, deferred_data_size;
unsigned long max_data_size;
int kex_in_progress;
- long next_rekey, last_rekey;
+ unsigned long next_rekey, last_rekey;
char *deferred_rekey_reason; /* points to STATIC string; don't free */
+
+ /*
+ * Fully qualified host name, which we need if doing GSSAPI.
+ */
+ char *fullhostname;
+
+#ifndef NO_GSSAPI
+ /*
+ * GSSAPI libraries for this session.
+ */
+ struct ssh_gss_liblist *gsslibs;
+#endif
};
#define logevent(s) logevent(ssh->frontend, s)
sfree(buf);
}
-#define bombout(msg) \
- do { \
- char *text = dupprintf msg; \
- ssh_do_close(ssh, FALSE); \
- logevent(text); \
- connection_fatal(ssh->frontend, "%s", text); \
- sfree(text); \
- } while (0)
+static void bomb_out(Ssh ssh, char *text)
+{
+ ssh_do_close(ssh, FALSE);
+ logevent(text);
+ connection_fatal(ssh->frontend, "%s", text);
+ sfree(text);
+}
+
+#define bombout(msg) bomb_out(ssh, dupprintf msg)
/* Functions to leave bits out of the SSH packet log file. */
static void dont_log_password(Ssh ssh, struct Packet *pkt, int blanktype)
{
- if (ssh->cfg.logomitpass)
+ if (conf_get_int(ssh->conf, CONF_logomitpass))
pkt->logmode = blanktype;
}
static void dont_log_data(Ssh ssh, struct Packet *pkt, int blanktype)
{
- if (ssh->cfg.logomitdata)
+ if (ssh->logomitdata)
pkt->logmode = blanktype;
}
pkt->logmode = PKTLOG_EMIT;
}
-/* Helper function for common bits of parsing cfg.ttymodes. */
-static void parse_ttymodes(Ssh ssh, char *modes,
+/* Helper function for common bits of parsing ttymodes. */
+static void parse_ttymodes(Ssh ssh,
void (*do_mode)(void *data, char *mode, char *val),
void *data)
{
- while (*modes) {
- char *t = strchr(modes, '\t');
- char *m = snewn(t-modes+1, char);
- char *val;
- strncpy(m, modes, t-modes);
- m[t-modes] = '\0';
- if (*(t+1) == 'A')
- val = get_ttymode(ssh->frontend, m);
- else
- val = dupstr(t+2);
- if (val)
- do_mode(data, m, val);
- sfree(m);
- sfree(val);
- modes += strlen(modes) + 1;
+ char *key, *val;
+
+ for (val = conf_get_str_strs(ssh->conf, CONF_ttymodes, NULL, &key);
+ val != NULL;
+ val = conf_get_str_strs(ssh->conf, CONF_ttymodes, key, &key)) {
+ /*
+ * val[0] is either 'V', indicating that an explicit value
+ * follows it, or 'A' indicating that we should pass the
+ * value through from the local environment via get_ttymode.
+ */
+ if (val[0] == 'A') {
+ val = get_ttymode(ssh->frontend, key);
+ if (val) {
+ do_mode(data, key, val);
+ sfree(val);
+ }
+ } else
+ do_mode(data, key, val + 1); /* skip the 'V' */
}
}
return low + 1 + CHANNEL_NUMBER_OFFSET;
}
+static void c_write_stderr(int trusted, const char *buf, int len)
+{
+ int i;
+ for (i = 0; i < len; i++)
+ if (buf[i] != '\r' && (trusted || buf[i] == '\n' || (buf[i] & 0x60)))
+ fputc(buf[i], stderr);
+}
+
static void c_write(Ssh ssh, const char *buf, int len)
{
- if ((flags & FLAG_STDERR)) {
- int i;
- for (i = 0; i < len; i++)
- if (buf[i] != '\r')
- fputc(buf[i], stderr);
- return;
- }
- from_backend(ssh->frontend, 1, buf, len);
+ if (flags & FLAG_STDERR)
+ c_write_stderr(1, buf, len);
+ else
+ from_backend(ssh->frontend, 1, buf, len);
}
static void c_write_untrusted(Ssh ssh, const char *buf, int len)
{
- int i;
- for (i = 0; i < len; i++) {
- if (buf[i] == '\n')
- c_write(ssh, "\r\n", 2);
- else if ((buf[i] & 0x60) || (buf[i] == '\r'))
- c_write(ssh, buf + i, 1);
- }
+ if (flags & FLAG_STDERR)
+ c_write_stderr(0, buf, len);
+ else
+ from_backend_untrusted(ssh->frontend, buf, len);
}
static void c_write_str(Ssh ssh, const char *buf)
if (ssh->logctx) {
int nblanks = 0;
struct logblank_t blank;
- if (ssh->cfg.logomitdata) {
+ if (ssh->logomitdata) {
int do_blank = FALSE, blank_prefix = 0;
/* "Session data" packets - omit the data field */
if ((st->pktin->type == SSH1_SMSG_STDOUT_DATA) ||
(st->pktin->type == SSH1_SMSG_STDERR_DATA)) {
- do_blank = TRUE; blank_prefix = 0;
- } else if (st->pktin->type == SSH1_MSG_CHANNEL_DATA) {
do_blank = TRUE; blank_prefix = 4;
+ } else if (st->pktin->type == SSH1_MSG_CHANNEL_DATA) {
+ do_blank = TRUE; blank_prefix = 8;
}
if (do_blank) {
blank.offset = blank_prefix;
PKT_INCOMING, st->pktin->type,
ssh1_pkt_type(st->pktin->type),
st->pktin->body, st->pktin->length,
- nblanks, &blank);
+ nblanks, &blank, NULL);
}
crFinish(st->pktin);
st->cipherblk = 8;
if (st->cipherblk < 8)
st->cipherblk = 8;
+ st->maclen = ssh->scmac ? ssh->scmac->len : 0;
- st->pktin->data = snewn(st->cipherblk + APIEXTRA, unsigned char);
+ if (ssh->sccipher && (ssh->sccipher->flags & SSH_CIPHER_IS_CBC) &&
+ ssh->scmac) {
+ /*
+ * When dealing with a CBC-mode cipher, we want to avoid the
+ * possibility of an attacker's tweaking the ciphertext stream
+ * so as to cause us to feed the same block to the block
+ * cipher more than once and thus leak information
+ * (VU#958563). The way we do this is not to take any
+ * decisions on the basis of anything we've decrypted until
+ * we've verified it with a MAC. That includes the packet
+ * length, so we just read data and check the MAC repeatedly,
+ * and when the MAC passes, see if the length we've got is
+ * plausible.
+ */
- /*
- * Acquire and decrypt the first block of the packet. This will
- * contain the length and padding details.
- */
- for (st->i = st->len = 0; st->i < st->cipherblk; st->i++) {
- while ((*datalen) == 0)
- crReturn(NULL);
- st->pktin->data[st->i] = *(*data)++;
- (*datalen)--;
- }
+ /* May as well allocate the whole lot now. */
+ st->pktin->data = snewn(OUR_V2_PACKETLIMIT + st->maclen + APIEXTRA,
+ unsigned char);
- if (ssh->sccipher)
- ssh->sccipher->decrypt(ssh->sc_cipher_ctx,
- st->pktin->data, st->cipherblk);
+ /* Read an amount corresponding to the MAC. */
+ for (st->i = 0; st->i < st->maclen; st->i++) {
+ while ((*datalen) == 0)
+ crReturn(NULL);
+ st->pktin->data[st->i] = *(*data)++;
+ (*datalen)--;
+ }
- /*
- * Now get the length and padding figures.
- */
- st->len = GET_32BIT(st->pktin->data);
- st->pad = st->pktin->data[4];
+ st->packetlen = 0;
+ {
+ unsigned char seq[4];
+ ssh->scmac->start(ssh->sc_mac_ctx);
+ PUT_32BIT(seq, st->incoming_sequence);
+ ssh->scmac->bytes(ssh->sc_mac_ctx, seq, 4);
+ }
- /*
- * _Completely_ silly lengths should be stomped on before they
- * do us any more damage.
- */
- if (st->len < 0 || st->len > 35000 || st->pad < 4 ||
- st->len - st->pad < 1 || (st->len + 4) % st->cipherblk != 0) {
- bombout(("Incoming packet was garbled on decryption"));
- ssh_free_packet(st->pktin);
- crStop(NULL);
- }
+ for (;;) { /* Once around this loop per cipher block. */
+ /* Read another cipher-block's worth, and tack it onto the end. */
+ for (st->i = 0; st->i < st->cipherblk; st->i++) {
+ while ((*datalen) == 0)
+ crReturn(NULL);
+ st->pktin->data[st->packetlen+st->maclen+st->i] = *(*data)++;
+ (*datalen)--;
+ }
+ /* Decrypt one more block (a little further back in the stream). */
+ ssh->sccipher->decrypt(ssh->sc_cipher_ctx,
+ st->pktin->data + st->packetlen,
+ st->cipherblk);
+ /* Feed that block to the MAC. */
+ ssh->scmac->bytes(ssh->sc_mac_ctx,
+ st->pktin->data + st->packetlen, st->cipherblk);
+ st->packetlen += st->cipherblk;
+ /* See if that gives us a valid packet. */
+ if (ssh->scmac->verresult(ssh->sc_mac_ctx,
+ st->pktin->data + st->packetlen) &&
+ ((st->len = toint(GET_32BIT(st->pktin->data))) ==
+ st->packetlen-4))
+ break;
+ if (st->packetlen >= OUR_V2_PACKETLIMIT) {
+ bombout(("No valid incoming packet found"));
+ ssh_free_packet(st->pktin);
+ crStop(NULL);
+ }
+ }
+ st->pktin->maxlen = st->packetlen + st->maclen;
+ st->pktin->data = sresize(st->pktin->data,
+ st->pktin->maxlen + APIEXTRA,
+ unsigned char);
+ } else {
+ st->pktin->data = snewn(st->cipherblk + APIEXTRA, unsigned char);
- /*
- * This enables us to deduce the payload length.
- */
- st->payload = st->len - st->pad - 1;
+ /*
+ * Acquire and decrypt the first block of the packet. This will
+ * contain the length and padding details.
+ */
+ for (st->i = st->len = 0; st->i < st->cipherblk; st->i++) {
+ while ((*datalen) == 0)
+ crReturn(NULL);
+ st->pktin->data[st->i] = *(*data)++;
+ (*datalen)--;
+ }
- st->pktin->length = st->payload + 5;
+ if (ssh->sccipher)
+ ssh->sccipher->decrypt(ssh->sc_cipher_ctx,
+ st->pktin->data, st->cipherblk);
- /*
- * So now we can work out the total packet length.
- */
- st->packetlen = st->len + 4;
- st->maclen = ssh->scmac ? ssh->scmac->len : 0;
+ /*
+ * Now get the length figure.
+ */
+ st->len = toint(GET_32BIT(st->pktin->data));
- /*
- * Allocate memory for the rest of the packet.
- */
- st->pktin->maxlen = st->packetlen + st->maclen;
- st->pktin->data = sresize(st->pktin->data,
- st->pktin->maxlen + APIEXTRA,
- unsigned char);
+ /*
+ * _Completely_ silly lengths should be stomped on before they
+ * do us any more damage.
+ */
+ if (st->len < 0 || st->len > OUR_V2_PACKETLIMIT ||
+ (st->len + 4) % st->cipherblk != 0) {
+ bombout(("Incoming packet was garbled on decryption"));
+ ssh_free_packet(st->pktin);
+ crStop(NULL);
+ }
- /*
- * Read and decrypt the remainder of the packet.
- */
- for (st->i = st->cipherblk; st->i < st->packetlen + st->maclen;
- st->i++) {
- while ((*datalen) == 0)
- crReturn(NULL);
- st->pktin->data[st->i] = *(*data)++;
- (*datalen)--;
- }
- /* Decrypt everything _except_ the MAC. */
- if (ssh->sccipher)
- ssh->sccipher->decrypt(ssh->sc_cipher_ctx,
- st->pktin->data + st->cipherblk,
- st->packetlen - st->cipherblk);
+ /*
+ * So now we can work out the total packet length.
+ */
+ st->packetlen = st->len + 4;
- st->pktin->encrypted_len = st->packetlen;
+ /*
+ * Allocate memory for the rest of the packet.
+ */
+ st->pktin->maxlen = st->packetlen + st->maclen;
+ st->pktin->data = sresize(st->pktin->data,
+ st->pktin->maxlen + APIEXTRA,
+ unsigned char);
- /*
- * Check the MAC.
- */
- if (ssh->scmac
- && !ssh->scmac->verify(ssh->sc_mac_ctx, st->pktin->data, st->len + 4,
- st->incoming_sequence)) {
- bombout(("Incorrect MAC received on packet"));
+ /*
+ * Read and decrypt the remainder of the packet.
+ */
+ for (st->i = st->cipherblk; st->i < st->packetlen + st->maclen;
+ st->i++) {
+ while ((*datalen) == 0)
+ crReturn(NULL);
+ st->pktin->data[st->i] = *(*data)++;
+ (*datalen)--;
+ }
+ /* Decrypt everything _except_ the MAC. */
+ if (ssh->sccipher)
+ ssh->sccipher->decrypt(ssh->sc_cipher_ctx,
+ st->pktin->data + st->cipherblk,
+ st->packetlen - st->cipherblk);
+
+ /*
+ * Check the MAC.
+ */
+ if (ssh->scmac
+ && !ssh->scmac->verify(ssh->sc_mac_ctx, st->pktin->data,
+ st->len + 4, st->incoming_sequence)) {
+ bombout(("Incorrect MAC received on packet"));
+ ssh_free_packet(st->pktin);
+ crStop(NULL);
+ }
+ }
+ /* Get and sanity-check the amount of random padding. */
+ st->pad = st->pktin->data[4];
+ if (st->pad < 4 || st->len - st->pad < 1) {
+ bombout(("Invalid padding length on received packet"));
ssh_free_packet(st->pktin);
crStop(NULL);
}
+ /*
+ * This enables us to deduce the payload length.
+ */
+ st->payload = st->len - st->pad - 1;
+
+ st->pktin->length = st->payload + 5;
+ st->pktin->encrypted_len = st->packetlen;
st->pktin->sequence = st->incoming_sequence++;
if (ssh->logctx) {
int nblanks = 0;
struct logblank_t blank;
- if (ssh->cfg.logomitdata) {
+ if (ssh->logomitdata) {
int do_blank = FALSE, blank_prefix = 0;
/* "Session data" packets - omit the data field */
if (st->pktin->type == SSH2_MSG_CHANNEL_DATA) {
- do_blank = TRUE; blank_prefix = 4;
- } else if (st->pktin->type == SSH2_MSG_CHANNEL_EXTENDED_DATA) {
do_blank = TRUE; blank_prefix = 8;
+ } else if (st->pktin->type == SSH2_MSG_CHANNEL_EXTENDED_DATA) {
+ do_blank = TRUE; blank_prefix = 12;
}
if (do_blank) {
blank.offset = blank_prefix;
}
}
log_packet(ssh->logctx, PKT_INCOMING, st->pktin->type,
- ssh2_pkt_type(ssh->pkt_ctx, st->pktin->type),
+ ssh2_pkt_type(ssh->pkt_kctx, ssh->pkt_actx,
+ st->pktin->type),
st->pktin->data+6, st->pktin->length-6,
- nblanks, &blank);
+ nblanks, &blank, &st->pktin->sequence);
}
crFinish(st->pktin);
log_packet(ssh->logctx, PKT_OUTGOING, pkt->data[12],
ssh1_pkt_type(pkt->data[12]),
pkt->body, pkt->length - (pkt->body - pkt->data),
- pkt->nblanks, pkt->blanks);
+ pkt->nblanks, pkt->blanks, NULL);
sfree(pkt->blanks); pkt->blanks = NULL;
pkt->nblanks = 0;
zlib_compress_block(ssh->cs_comp_ctx,
pkt->data + 12, pkt->length - 12,
&compblk, &complen);
+ ssh_pkt_ensure(pkt, complen + 2); /* just in case it's got bigger */
memcpy(pkt->data + 12, compblk, complen);
sfree(compblk);
pkt->length = complen + 12;
return biglen + 4; /* len(length+padding+type+data+CRC) */
}
+static int s_write(Ssh ssh, void *data, int len)
+{
+ if (ssh->logctx)
+ log_packet(ssh->logctx, PKT_OUTGOING, -1, NULL, data, len,
+ 0, NULL, NULL);
+ return sk_write(ssh->s, (char *)data, len);
+}
+
static void s_wrpkt(Ssh ssh, struct Packet *pkt)
{
int len, backlog, offset;
len = s_wrpkt_prepare(ssh, pkt, &offset);
- backlog = sk_write(ssh->s, (char *)pkt->data + offset, len);
+ backlog = s_write(ssh, pkt->data + offset, len);
if (backlog > SSH_MAX_BACKLOG)
ssh_throttle_all(ssh, 1, backlog);
ssh_free_packet(pkt);
while ((argtype = va_arg(ap, int)) != PKT_END) {
unsigned char *argp, argchar;
+ char *sargp;
unsigned long argint;
int arglen;
switch (argtype) {
ssh_pkt_adddata(pkt, argp, arglen);
break;
case PKT_STR:
- argp = va_arg(ap, unsigned char *);
- ssh_pkt_addstring(pkt, argp);
+ sargp = va_arg(ap, char *);
+ ssh_pkt_addstring(pkt, sargp);
break;
case PKT_BIGNUM:
bn = va_arg(ap, Bignum);
if (body) pkt->body = pkt->data + offset;
}
}
-static void ssh_pkt_adddata(struct Packet *pkt, void *data, int len)
+static void ssh_pkt_adddata(struct Packet *pkt, const void *data, int len)
{
if (pkt->logmode != PKTLOG_EMIT) {
pkt->nblanks++;
ssh_pkt_adduint32(pkt, 0);
pkt->savedpos = pkt->length;
}
-static void ssh_pkt_addstring_str(struct Packet *pkt, char *data)
+static void ssh_pkt_addstring_str(struct Packet *pkt, const char *data)
{
ssh_pkt_adddata(pkt, data, strlen(data));
PUT_32BIT(pkt->data + pkt->savedpos - 4, pkt->length - pkt->savedpos);
}
-static void ssh_pkt_addstring_data(struct Packet *pkt, char *data, int len)
+static void ssh_pkt_addstring_data(struct Packet *pkt, const char *data,
+ int len)
{
ssh_pkt_adddata(pkt, data, len);
PUT_32BIT(pkt->data + pkt->savedpos - 4, pkt->length - pkt->savedpos);
}
-static void ssh_pkt_addstring(struct Packet *pkt, char *data)
+static void ssh_pkt_addstring(struct Packet *pkt, const char *data)
{
ssh_pkt_addstring_start(pkt);
ssh_pkt_addstring_str(pkt, data);
static void ssh1_pkt_addmp(struct Packet *pkt, Bignum b)
{
int len = ssh1_bignum_length(b);
- unsigned char *data = snewn(len, char);
+ unsigned char *data = snewn(len, unsigned char);
(void) ssh1_write_bignum(data, b);
ssh_pkt_adddata(pkt, data, len);
sfree(data);
if (ssh->logctx)
log_packet(ssh->logctx, PKT_OUTGOING, pkt->data[5],
- ssh2_pkt_type(ssh->pkt_ctx, pkt->data[5]),
+ ssh2_pkt_type(ssh->pkt_kctx, ssh->pkt_actx, pkt->data[5]),
pkt->body, pkt->length - (pkt->body - pkt->data),
- pkt->nblanks, pkt->blanks);
+ pkt->nblanks, pkt->blanks, &ssh->v2_outgoing_sequence);
sfree(pkt->blanks); pkt->blanks = NULL;
pkt->nblanks = 0;
return;
}
len = ssh2_pkt_construct(ssh, pkt);
- backlog = sk_write(ssh->s, (char *)pkt->data, len);
+ backlog = s_write(ssh, pkt->data, len);
if (backlog > SSH_MAX_BACKLOG)
ssh_throttle_all(ssh, 1, backlog);
{
int len;
if (ssh->cscipher != NULL && (ssh->cscipher->flags & SSH_CIPHER_IS_CBC) &&
- ssh->deferred_len == 0 && !noignore) {
+ ssh->deferred_len == 0 && !noignore &&
+ !(ssh->remote_bugs & BUG_CHOKES_ON_SSH2_IGNORE)) {
/*
* Interpose an SSH_MSG_IGNORE to ensure that user data don't
* get encrypted with a known IV.
*/
struct Packet *ipkt = ssh2_pkt_init(SSH2_MSG_IGNORE);
+ ssh2_pkt_addstring_start(ipkt);
ssh2_pkt_defer_noqueue(ssh, ipkt, TRUE);
}
len = ssh2_pkt_construct(ssh, pkt);
ssh2_pkt_send_noqueue(ssh, pkt);
}
-#if 0 /* disused */
/*
* Either queue or defer a packet, depending on whether queueing is
* set.
else
ssh2_pkt_defer_noqueue(ssh, pkt, FALSE);
}
-#endif
/*
* Send the whole deferred data block constructed by
static void ssh_pkt_defersend(Ssh ssh)
{
int backlog;
- backlog = sk_write(ssh->s, (char *)ssh->deferred_send_data,
- ssh->deferred_len);
+ backlog = s_write(ssh, ssh->deferred_send_data, ssh->deferred_len);
ssh->deferred_len = ssh->deferred_size = 0;
sfree(ssh->deferred_send_data);
ssh->deferred_send_data = NULL;
ssh->deferred_data_size = 0;
}
+/*
+ * Send a packet whose length needs to be disguised (typically
+ * passwords or keyboard-interactive responses).
+ */
+static void ssh2_pkt_send_with_padding(Ssh ssh, struct Packet *pkt,
+ int padsize)
+{
+#if 0
+ if (0) {
+ /*
+ * The simplest way to do this is to adjust the
+ * variable-length padding field in the outgoing packet.
+ *
+ * Currently compiled out, because some Cisco SSH servers
+ * don't like excessively padded packets (bah, why's it
+ * always Cisco?)
+ */
+ pkt->forcepad = padsize;
+ ssh2_pkt_send(ssh, pkt);
+ } else
+#endif
+ {
+ /*
+ * If we can't do that, however, an alternative approach is
+ * to use the pkt_defer mechanism to bundle the packet
+ * tightly together with an SSH_MSG_IGNORE such that their
+ * combined length is a constant. So first we construct the
+ * final form of this packet and defer its sending.
+ */
+ ssh2_pkt_defer(ssh, pkt);
+
+ /*
+ * Now construct an SSH_MSG_IGNORE which includes a string
+ * that's an exact multiple of the cipher block size. (If
+ * the cipher is NULL so that the block size is
+ * unavailable, we don't do this trick at all, because we
+ * gain nothing by it.)
+ */
+ if (ssh->cscipher &&
+ !(ssh->remote_bugs & BUG_CHOKES_ON_SSH2_IGNORE)) {
+ int stringlen, i;
+
+ stringlen = (256 - ssh->deferred_len);
+ stringlen += ssh->cscipher->blksize - 1;
+ stringlen -= (stringlen % ssh->cscipher->blksize);
+ if (ssh->cscomp) {
+ /*
+ * Temporarily disable actual compression, so we
+ * can guarantee to get this string exactly the
+ * length we want it. The compression-disabling
+ * routine should return an integer indicating how
+ * many bytes we should adjust our string length
+ * by.
+ */
+ stringlen -=
+ ssh->cscomp->disable_compression(ssh->cs_comp_ctx);
+ }
+ pkt = ssh2_pkt_init(SSH2_MSG_IGNORE);
+ ssh2_pkt_addstring_start(pkt);
+ for (i = 0; i < stringlen; i++) {
+ char c = (char) random_byte();
+ ssh2_pkt_addstring_data(pkt, &c, 1);
+ }
+ ssh2_pkt_defer(ssh, pkt);
+ }
+ ssh_pkt_defersend(ssh);
+ }
+}
+
/*
* Send all queued SSH-2 packets. We send them by means of
* ssh2_pkt_defer_noqueue(), in case they included a pair of
*length = 0;
if (pkt->length - pkt->savedpos < 4)
return;
- len = GET_32BIT(pkt->body + pkt->savedpos);
+ len = toint(GET_32BIT(pkt->body + pkt->savedpos));
if (len < 0)
return;
*length = len;
* See if this is in fact an ssh-rsa signature and a buggy
* server; otherwise we can just do this the easy way.
*/
- if ((ssh->remote_bugs & BUG_SSH2_RSA_PADDING) &&
+ if ((ssh->remote_bugs & BUG_SSH2_RSA_PADDING) && pkblob_len > 4+7+4 &&
(GET_32BIT(pkblob) == 7 && !memcmp(pkblob+4, "ssh-rsa", 7))) {
int pos, len, siglen;
*/
pos = 4+7; /* skip over "ssh-rsa" */
- pos += 4 + GET_32BIT(pkblob+pos); /* skip over exponent */
- len = GET_32BIT(pkblob+pos); /* find length of modulus */
+ len = toint(GET_32BIT(pkblob+pos)); /* get length of exponent */
+ if (len < 0 || len > pkblob_len - pos - 4)
+ goto give_up;
+ pos += 4 + len; /* skip over exponent */
+ if (pkblob_len - pos < 4)
+ goto give_up;
+ len = toint(GET_32BIT(pkblob+pos)); /* find length of modulus */
+ if (len < 0 || len > pkblob_len - pos - 4)
+ goto give_up;
pos += 4; /* find modulus itself */
while (len > 0 && pkblob[pos] == 0)
len--, pos++;
* Now find the signature integer.
*/
pos = 4+7; /* skip over "ssh-rsa" */
- siglen = GET_32BIT(sigblob+pos);
+ if (sigblob_len < pos+4)
+ goto give_up;
+ siglen = toint(GET_32BIT(sigblob+pos));
+ if (siglen != sigblob_len - pos - 4)
+ goto give_up;
/* debug(("signature length is %d\n", siglen)); */
if (len != siglen) {
return;
}
- /* Otherwise fall through and do it the easy way. */
+ /* Otherwise fall through and do it the easy way. We also come
+ * here as a fallback if we discover above that the key blob
+ * is misformatted in some way. */
+ give_up:;
}
ssh2_pkt_addstring_start(pkt);
ssh->remote_bugs = 0;
- if (ssh->cfg.sshbug_ignore1 == FORCE_ON ||
- (ssh->cfg.sshbug_ignore1 == AUTO &&
+ /*
+ * General notes on server version strings:
+ * - Not all servers reporting "Cisco-1.25" have all the bugs listed
+ * here -- in particular, we've heard of one that's perfectly happy
+ * with SSH1_MSG_IGNOREs -- but this string never seems to change,
+ * so we can't distinguish them.
+ */
+ if (conf_get_int(ssh->conf, CONF_sshbug_ignore1) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_ignore1) == AUTO &&
(!strcmp(imp, "1.2.18") || !strcmp(imp, "1.2.19") ||
!strcmp(imp, "1.2.20") || !strcmp(imp, "1.2.21") ||
!strcmp(imp, "1.2.22") || !strcmp(imp, "Cisco-1.25") ||
logevent("We believe remote version has SSH-1 ignore bug");
}
- if (ssh->cfg.sshbug_plainpw1 == FORCE_ON ||
- (ssh->cfg.sshbug_plainpw1 == AUTO &&
+ if (conf_get_int(ssh->conf, CONF_sshbug_plainpw1) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_plainpw1) == AUTO &&
(!strcmp(imp, "Cisco-1.25") || !strcmp(imp, "OSU_1.4alpha3")))) {
/*
* These versions need a plain password sent; they can't
logevent("We believe remote version needs a plain SSH-1 password");
}
- if (ssh->cfg.sshbug_rsa1 == FORCE_ON ||
- (ssh->cfg.sshbug_rsa1 == AUTO &&
+ if (conf_get_int(ssh->conf, CONF_sshbug_rsa1) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_rsa1) == AUTO &&
(!strcmp(imp, "Cisco-1.25")))) {
/*
* These versions apparently have no clue whatever about
logevent("We believe remote version can't handle SSH-1 RSA authentication");
}
- if (ssh->cfg.sshbug_hmac2 == FORCE_ON ||
- (ssh->cfg.sshbug_hmac2 == AUTO &&
+ if (conf_get_int(ssh->conf, CONF_sshbug_hmac2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_hmac2) == AUTO &&
!wc_match("* VShell", imp) &&
(wc_match("2.1.0*", imp) || wc_match("2.0.*", imp) ||
wc_match("2.2.0*", imp) || wc_match("2.3.0*", imp) ||
logevent("We believe remote version has SSH-2 HMAC bug");
}
- if (ssh->cfg.sshbug_derivekey2 == FORCE_ON ||
- (ssh->cfg.sshbug_derivekey2 == AUTO &&
+ if (conf_get_int(ssh->conf, CONF_sshbug_derivekey2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_derivekey2) == AUTO &&
!wc_match("* VShell", imp) &&
(wc_match("2.0.0*", imp) || wc_match("2.0.10*", imp) ))) {
/*
logevent("We believe remote version has SSH-2 key-derivation bug");
}
- if (ssh->cfg.sshbug_rsapad2 == FORCE_ON ||
- (ssh->cfg.sshbug_rsapad2 == AUTO &&
+ if (conf_get_int(ssh->conf, CONF_sshbug_rsapad2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_rsapad2) == AUTO &&
(wc_match("OpenSSH_2.[5-9]*", imp) ||
wc_match("OpenSSH_3.[0-2]*", imp)))) {
/*
logevent("We believe remote version has SSH-2 RSA padding bug");
}
- if (ssh->cfg.sshbug_pksessid2 == FORCE_ON ||
- (ssh->cfg.sshbug_pksessid2 == AUTO &&
+ if (conf_get_int(ssh->conf, CONF_sshbug_pksessid2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_pksessid2) == AUTO &&
wc_match("OpenSSH_2.[0-2]*", imp))) {
/*
* These versions have the SSH-2 session-ID bug in
logevent("We believe remote version has SSH-2 public-key-session-ID bug");
}
- if (ssh->cfg.sshbug_rekey2 == FORCE_ON ||
- (ssh->cfg.sshbug_rekey2 == AUTO &&
+ if (conf_get_int(ssh->conf, CONF_sshbug_rekey2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_rekey2) == AUTO &&
(wc_match("DigiSSH_2.0", imp) ||
wc_match("OpenSSH_2.[0-4]*", imp) ||
wc_match("OpenSSH_2.5.[0-3]*", imp) ||
ssh->remote_bugs |= BUG_SSH2_REKEY;
logevent("We believe remote version has SSH-2 rekey bug");
}
+
+ if (conf_get_int(ssh->conf, CONF_sshbug_maxpkt2) == FORCE_ON ||
+ (conf_get_int(ssh->conf, CONF_sshbug_maxpkt2) == AUTO &&
+ (wc_match("1.36_sshlib GlobalSCAPE", imp) ||
+ wc_match("1.36 sshlib: GlobalScape", imp)))) {
+ /*
+ * This version ignores our makpkt and needs to be throttled.
+ */
+ ssh->remote_bugs |= BUG_SSH2_MAXPKT;
+ logevent("We believe remote version ignores SSH-2 maximum packet size");
+ }
+
+ if (conf_get_int(ssh->conf, CONF_sshbug_ignore2) == FORCE_ON) {
+ /*
+ * Servers that don't support SSH2_MSG_IGNORE. Currently,
+ * none detected automatically.
+ */
+ ssh->remote_bugs |= BUG_CHOKES_ON_SSH2_IGNORE;
+ logevent("We believe remote version has SSH-2 ignore bug");
+ }
+
+ if (conf_get_int(ssh->conf, CONF_sshbug_winadj) == FORCE_ON) {
+ /*
+ * Servers that don't support our winadj request for one
+ * reason or another. Currently, none detected automatically.
+ */
+ ssh->remote_bugs |= BUG_CHOKES_ON_WINADJ;
+ logevent("We believe remote version has winadj bug");
+ }
}
/*
}
}
+/*
+ * Send an appropriate SSH version string.
+ */
+static void ssh_send_verstring(Ssh ssh, char *svers)
+{
+ char *verstring;
+
+ if (ssh->version == 2) {
+ /*
+ * Construct a v2 version string.
+ */
+ verstring = dupprintf("SSH-2.0-%s\015\012", sshver);
+ } else {
+ /*
+ * Construct a v1 version string.
+ */
+ verstring = dupprintf("SSH-%s-%s\012",
+ (ssh_versioncmp(svers, "1.5") <= 0 ?
+ svers : "1.5"),
+ sshver);
+ }
+
+ ssh_fix_verstring(verstring);
+
+ if (ssh->version == 2) {
+ size_t len;
+ /*
+ * Record our version string.
+ */
+ len = strcspn(verstring, "\015\012");
+ ssh->v_c = snewn(len + 1, char);
+ memcpy(ssh->v_c, verstring, len);
+ ssh->v_c[len] = 0;
+ }
+
+ logeventf(ssh, "We claim version: %.*s",
+ strcspn(verstring, "\015\012"), verstring);
+ s_write(ssh, verstring, strlen(verstring));
+ sfree(verstring);
+}
+
static int do_ssh_init(Ssh ssh, unsigned char c)
{
struct do_ssh_init_state {
+ int crLine;
int vslen;
char version[10];
char *vstring;
int proto1, proto2;
};
crState(do_ssh_init_state);
-
- crBegin(ssh->do_ssh_init_crstate);
+
+ crBeginState;
/* Search for a line beginning with the string "SSH-" in the input. */
for (;;) {
/* Anything greater or equal to "1.99" means protocol 2 is supported. */
s->proto2 = ssh_versioncmp(s->version, "1.99") >= 0;
- if (ssh->cfg.sshprot == 0 && !s->proto1) {
+ if (conf_get_int(ssh->conf, CONF_sshprot) == 0 && !s->proto1) {
bombout(("SSH protocol version 1 required by user but not provided by server"));
crStop(0);
}
- if (ssh->cfg.sshprot == 3 && !s->proto2) {
+ if (conf_get_int(ssh->conf, CONF_sshprot) == 3 && !s->proto2) {
bombout(("SSH protocol version 2 required by user but not provided by server"));
crStop(0);
}
- {
- char *verstring;
+ if (s->proto2 && (conf_get_int(ssh->conf, CONF_sshprot) >= 2 || !s->proto1))
+ ssh->version = 2;
+ else
+ ssh->version = 1;
- if (s->proto2 && (ssh->cfg.sshprot >= 2 || !s->proto1)) {
- /*
- * Construct a v2 version string.
- */
- verstring = dupprintf("SSH-2.0-%s\015\012", sshver);
- ssh->version = 2;
- } else {
- /*
- * Construct a v1 version string.
- */
- verstring = dupprintf("SSH-%s-%s\012",
- (ssh_versioncmp(s->version, "1.5") <= 0 ?
- s->version : "1.5"),
- sshver);
- ssh->version = 1;
- }
+ logeventf(ssh, "Using SSH protocol version %d", ssh->version);
- ssh_fix_verstring(verstring);
+ /* Send the version string, if we haven't already */
+ if (conf_get_int(ssh->conf, CONF_sshprot) != 3)
+ ssh_send_verstring(ssh, s->version);
- if (ssh->version == 2) {
- size_t len;
- /*
- * Hash our version string and their version string.
- */
- len = strcspn(verstring, "\015\012");
- ssh->v_c = snewn(len + 1, char);
- memcpy(ssh->v_c, verstring, len);
- ssh->v_c[len] = 0;
- len = strcspn(s->vstring, "\015\012");
- ssh->v_s = snewn(len + 1, char);
- memcpy(ssh->v_s, s->vstring, len);
- ssh->v_s[len] = 0;
+ if (ssh->version == 2) {
+ size_t len;
+ /*
+ * Record their version string.
+ */
+ len = strcspn(s->vstring, "\015\012");
+ ssh->v_s = snewn(len + 1, char);
+ memcpy(ssh->v_s, s->vstring, len);
+ ssh->v_s[len] = 0;
- /*
- * Initialise SSH-2 protocol.
- */
- ssh->protocol = ssh2_protocol;
- ssh2_protocol_setup(ssh);
- ssh->s_rdpkt = ssh2_rdpkt;
- } else {
- /*
- * Initialise SSH-1 protocol.
- */
- ssh->protocol = ssh1_protocol;
- ssh1_protocol_setup(ssh);
- ssh->s_rdpkt = ssh1_rdpkt;
- }
- logeventf(ssh, "We claim version: %.*s",
- strcspn(verstring, "\015\012"), verstring);
- sk_write(ssh->s, verstring, strlen(verstring));
- sfree(verstring);
- if (ssh->version == 2)
- do_ssh2_transport(ssh, NULL, -1, NULL);
+ /*
+ * Initialise SSH-2 protocol.
+ */
+ ssh->protocol = ssh2_protocol;
+ ssh2_protocol_setup(ssh);
+ ssh->s_rdpkt = ssh2_rdpkt;
+ } else {
+ /*
+ * Initialise SSH-1 protocol.
+ */
+ ssh->protocol = ssh1_protocol;
+ ssh1_protocol_setup(ssh);
+ ssh->s_rdpkt = ssh1_rdpkt;
}
-
- logeventf(ssh, "Using SSH protocol version %d", ssh->version);
+ if (ssh->version == 2)
+ do_ssh2_transport(ssh, NULL, -1, NULL);
update_specials_menu(ssh->frontend);
ssh->state = SSH_STATE_BEFORE_SIZE;
- ssh->pinger = pinger_new(&ssh->cfg, &ssh_backend, ssh);
+ ssh->pinger = pinger_new(ssh->conf, &ssh_backend, ssh);
sfree(s->vstring);
static void ssh_process_incoming_data(Ssh ssh,
unsigned char **data, int *datalen)
{
- struct Packet *pktin = ssh->s_rdpkt(ssh, data, datalen);
+ struct Packet *pktin;
+
+ pktin = ssh->s_rdpkt(ssh, data, datalen);
if (pktin) {
ssh->protocol(ssh, NULL, 0, pktin);
ssh_free_packet(pktin);
static void ssh_gotdata(Ssh ssh, unsigned char *data, int datalen)
{
+ /* Log raw data, if we're in that mode. */
+ if (ssh->logctx)
+ log_packet(ssh->logctx, PKT_INCOMING, -1, NULL, data, datalen,
+ 0, NULL, NULL);
+
crBegin(ssh->ssh_gotdata_crstate);
/*
x11_close(c->u.x11.s);
break;
case CHAN_SOCKDATA:
+ case CHAN_SOCKDATA_DORMANT:
pfd_close(c->u.pfd.s);
break;
}
del234(ssh->portfwds, pf); /* moving next one to index 0 */
free_portfwd(pf);
}
+ freetree234(ssh->portfwds);
+ ssh->portfwds = NULL;
}
return ret;
error_msg = "Server closed network connection";
}
+ if (ssh->close_expected && ssh->clean_exit && ssh->exitcode < 0)
+ ssh->exitcode = 0;
+
if (need_notify)
notify_remote_exit(ssh->frontend);
SockAddr addr;
const char *err;
+ char *loghost;
+ int addressfamily, sshprot;
+
+ loghost = conf_get_str(ssh->conf, CONF_loghost);
+ if (*loghost) {
+ char *colon;
- ssh->savedhost = snewn(1 + strlen(host), char);
- strcpy(ssh->savedhost, host);
-
- if (port < 0)
- port = 22; /* default ssh port */
- ssh->savedport = port;
+ ssh->savedhost = dupstr(loghost);
+ ssh->savedport = 22; /* default ssh port */
- /*
- * Try to find host.
- */
+ /*
+ * A colon suffix on savedhost also lets us affect
+ * savedport.
+ *
+ * (FIXME: do something about IPv6 address literals here.)
+ */
+ colon = strrchr(ssh->savedhost, ':');
+ if (colon) {
+ *colon++ = '\0';
+ if (*colon)
+ ssh->savedport = atoi(colon);
+ }
+ } else {
+ ssh->savedhost = dupstr(host);
+ if (port < 0)
+ port = 22; /* default ssh port */
+ ssh->savedport = port;
+ }
+
+ /*
+ * Try to find host.
+ */
+ addressfamily = conf_get_int(ssh->conf, CONF_addressfamily);
logeventf(ssh, "Looking up host \"%s\"%s", host,
- (ssh->cfg.addressfamily == ADDRTYPE_IPV4 ? " (IPv4)" :
- (ssh->cfg.addressfamily == ADDRTYPE_IPV6 ? " (IPv6)" : "")));
- addr = name_lookup(host, port, realhost, &ssh->cfg,
- ssh->cfg.addressfamily);
+ (addressfamily == ADDRTYPE_IPV4 ? " (IPv4)" :
+ (addressfamily == ADDRTYPE_IPV6 ? " (IPv6)" : "")));
+ addr = name_lookup(host, port, realhost, ssh->conf, addressfamily);
if ((err = sk_addr_error(addr)) != NULL) {
sk_addr_free(addr);
return err;
}
+ ssh->fullhostname = dupstr(*realhost); /* save in case of GSSAPI */
/*
* Open socket.
*/
ssh->fn = &fn_table;
ssh->s = new_connection(addr, *realhost, port,
- 0, 1, nodelay, keepalive, (Plug) ssh, &ssh->cfg);
+ 0, 1, nodelay, keepalive, (Plug) ssh, ssh->conf);
if ((err = sk_socket_error(ssh->s)) != NULL) {
ssh->s = NULL;
notify_remote_exit(ssh->frontend);
return err;
}
+ /*
+ * If the SSH version number's fixed, set it now, and if it's SSH-2,
+ * send the version string too.
+ */
+ sshprot = conf_get_int(ssh->conf, CONF_sshprot);
+ if (sshprot == 0)
+ ssh->version = 1;
+ if (sshprot == 3) {
+ ssh->version = 2;
+ ssh_send_verstring(ssh, NULL);
+ }
+
+ /*
+ * loghost, if configured, overrides realhost.
+ */
+ if (*loghost) {
+ sfree(*realhost);
+ *realhost = dupstr(loghost);
+ }
+
return NULL;
}
/*
* Throttle or unthrottle the SSH connection.
*/
-static void ssh1_throttle(Ssh ssh, int adjust)
+static void ssh_throttle_conn(Ssh ssh, int adjust)
{
- int old_count = ssh->v1_throttle_count;
- ssh->v1_throttle_count += adjust;
- assert(ssh->v1_throttle_count >= 0);
- if (ssh->v1_throttle_count && !old_count) {
+ int old_count = ssh->conn_throttle_count;
+ ssh->conn_throttle_count += adjust;
+ assert(ssh->conn_throttle_count >= 0);
+ if (ssh->conn_throttle_count && !old_count) {
ssh_set_frozen(ssh, 1);
- } else if (!ssh->v1_throttle_count && old_count) {
+ } else if (!ssh->conn_throttle_count && old_count) {
ssh_set_frozen(ssh, 0);
}
}
}
}
-/*
- * Username and password input, abstracted off into routines
- * reusable in several places - even between SSH-1 and SSH-2.
- */
-
-/* Set up a username or password input loop on a given buffer. */
-static void setup_userpass_input(Ssh ssh, char *buffer, int buflen, int echo)
-{
- ssh->userpass_input_buffer = buffer;
- ssh->userpass_input_buflen = buflen;
- ssh->userpass_input_bufpos = 0;
- ssh->userpass_input_echo = echo;
-}
-
-/*
- * Process some terminal data in the course of username/password
- * input. Returns >0 for success (line of input returned in
- * buffer), <0 for failure (user hit ^C/^D, bomb out and exit), 0
- * for inconclusive (keep waiting for more input please).
- */
-static int process_userpass_input(Ssh ssh, unsigned char *in, int inlen)
-{
- char c;
-
- while (inlen--) {
- switch (c = *in++) {
- case 10:
- case 13:
- ssh->userpass_input_buffer[ssh->userpass_input_bufpos] = 0;
- ssh->userpass_input_buffer[ssh->userpass_input_buflen-1] = 0;
- return +1;
- break;
- case 8:
- case 127:
- if (ssh->userpass_input_bufpos > 0) {
- if (ssh->userpass_input_echo)
- c_write_str(ssh, "\b \b");
- ssh->userpass_input_bufpos--;
- }
- break;
- case 21:
- case 27:
- while (ssh->userpass_input_bufpos > 0) {
- if (ssh->userpass_input_echo)
- c_write_str(ssh, "\b \b");
- ssh->userpass_input_bufpos--;
- }
- break;
- case 3:
- case 4:
- return -1;
- break;
- default:
- /*
- * This simplistic check for printability is disabled
- * when we're doing password input, because some people
- * have control characters in their passwords.o
- */
- if ((!ssh->userpass_input_echo ||
- (c >= ' ' && c <= '~') ||
- ((unsigned char) c >= 160))
- && ssh->userpass_input_bufpos < ssh->userpass_input_buflen-1) {
- ssh->userpass_input_buffer[ssh->userpass_input_bufpos++] = c;
- if (ssh->userpass_input_echo)
- c_write(ssh, &c, 1);
- }
- break;
- }
- }
- return 0;
-}
-
static void ssh_agent_callback(void *sshv, void *reply, int replylen)
{
Ssh ssh = (Ssh) sshv;
Ssh ssh = c->ssh;
void *sentreply = reply;
+ c->u.a.outstanding_requests--;
if (!sentreply) {
/* Fake SSH_AGENT_FAILURE. */
sentreply = "\0\0\0\1\5";
} else {
send_packet(ssh, SSH1_MSG_CHANNEL_DATA,
PKT_INT, c->remoteid,
- PKTT_DATA,
PKT_INT, replylen,
+ PKTT_DATA,
PKT_DATA, sentreply, replylen,
PKTT_OTHER,
PKT_END);
}
if (reply)
sfree(reply);
+ /*
+ * If we've already seen an incoming EOF but haven't sent an
+ * outgoing one, this may be the moment to send it.
+ */
+ if (c->u.a.outstanding_requests == 0 && (c->closes & CLOSES_RCVD_EOF))
+ sshfwd_write_eof(c);
}
/*
{
int i, j, ret;
unsigned char cookie[8], *ptr;
- struct RSAKey servkey, hostkey;
struct MD5Context md5c;
struct do_ssh1_login_state {
+ int crLine;
int len;
unsigned char *rsabuf, *keystr1, *keystr2;
unsigned long supported_ciphers_mask, supported_auths_mask;
int tis_auth_refused, ccard_auth_refused;
unsigned char session_id[16];
int cipher_type;
- char username[100];
void *publickey_blob;
int publickey_bloblen;
- char password[100];
- char prompt[200];
- int pos;
+ char *publickey_comment;
+ int publickey_encrypted;
+ prompts_t *cur_prompt;
char c;
int pwpkt_type;
unsigned char request[5], *response, *p;
char *commentp;
int commentlen;
int dlgret;
+ Filename *keyfile;
+ struct RSAKey servkey, hostkey;
};
crState(do_ssh1_login_state);
- crBegin(ssh->do_ssh1_login_crstate);
+ crBeginState;
if (!pktin)
crWaitUntil(pktin);
}
memcpy(cookie, ptr, 8);
- if (!ssh1_pkt_getrsakey(pktin, &servkey, &s->keystr1) ||
- !ssh1_pkt_getrsakey(pktin, &hostkey, &s->keystr2)) {
+ if (!ssh1_pkt_getrsakey(pktin, &s->servkey, &s->keystr1) ||
+ !ssh1_pkt_getrsakey(pktin, &s->hostkey, &s->keystr2)) {
bombout(("Failed to read SSH-1 public keys from public key packet"));
crStop(0);
}
char logmsg[80];
logevent("Host key fingerprint is:");
strcpy(logmsg, " ");
- hostkey.comment = NULL;
+ s->hostkey.comment = NULL;
rsa_fingerprint(logmsg + strlen(logmsg),
- sizeof(logmsg) - strlen(logmsg), &hostkey);
+ sizeof(logmsg) - strlen(logmsg), &s->hostkey);
logevent(logmsg);
}
ssh->v1_remote_protoflags = ssh_pkt_getuint32(pktin);
s->supported_ciphers_mask = ssh_pkt_getuint32(pktin);
s->supported_auths_mask = ssh_pkt_getuint32(pktin);
+ if ((ssh->remote_bugs & BUG_CHOKES_ON_RSA))
+ s->supported_auths_mask &= ~(1 << SSH1_AUTH_RSA);
ssh->v1_local_protoflags =
ssh->v1_remote_protoflags & SSH1_PROTOFLAGS_SUPPORTED;
ssh->v1_local_protoflags |= SSH1_PROTOFLAG_SCREEN_NUMBER;
MD5Init(&md5c);
- MD5Update(&md5c, s->keystr2, hostkey.bytes);
- MD5Update(&md5c, s->keystr1, servkey.bytes);
+ MD5Update(&md5c, s->keystr2, s->hostkey.bytes);
+ MD5Update(&md5c, s->keystr1, s->servkey.bytes);
MD5Update(&md5c, cookie, 8);
MD5Final(s->session_id, &md5c);
/*
* Verify that the `bits' and `bytes' parameters match.
*/
- if (hostkey.bits > hostkey.bytes * 8 ||
- servkey.bits > servkey.bytes * 8) {
+ if (s->hostkey.bits > s->hostkey.bytes * 8 ||
+ s->servkey.bits > s->servkey.bytes * 8) {
bombout(("SSH-1 public keys were badly formatted"));
crStop(0);
}
- s->len = (hostkey.bytes > servkey.bytes ? hostkey.bytes : servkey.bytes);
+ s->len = (s->hostkey.bytes > s->servkey.bytes ?
+ s->hostkey.bytes : s->servkey.bytes);
s->rsabuf = snewn(s->len, unsigned char);
/*
* First format the key into a string.
*/
- int len = rsastr_len(&hostkey);
+ int len = rsastr_len(&s->hostkey);
char fingerprint[100];
char *keystr = snewn(len, char);
- rsastr_fmt(keystr, &hostkey);
- rsa_fingerprint(fingerprint, sizeof(fingerprint), &hostkey);
+ rsastr_fmt(keystr, &s->hostkey);
+ rsa_fingerprint(fingerprint, sizeof(fingerprint), &s->hostkey);
ssh_set_frozen(ssh, 1);
s->dlgret = verify_ssh_host_key(ssh->frontend,
s->rsabuf[i] ^= s->session_id[i];
}
- if (hostkey.bytes > servkey.bytes) {
- ret = rsaencrypt(s->rsabuf, 32, &servkey);
+ if (s->hostkey.bytes > s->servkey.bytes) {
+ ret = rsaencrypt(s->rsabuf, 32, &s->servkey);
if (ret)
- ret = rsaencrypt(s->rsabuf, servkey.bytes, &hostkey);
+ ret = rsaencrypt(s->rsabuf, s->servkey.bytes, &s->hostkey);
} else {
- ret = rsaencrypt(s->rsabuf, 32, &hostkey);
+ ret = rsaencrypt(s->rsabuf, 32, &s->hostkey);
if (ret)
- ret = rsaencrypt(s->rsabuf, hostkey.bytes, &servkey);
+ ret = rsaencrypt(s->rsabuf, s->hostkey.bytes, &s->servkey);
}
if (!ret) {
bombout(("SSH-1 public key encryptions failed due to bad formatting"));
char *cipher_string = NULL;
int i;
for (i = 0; !cipher_chosen && i < CIPHER_MAX; i++) {
- int next_cipher = ssh->cfg.ssh_cipherlist[i];
+ int next_cipher = conf_get_int_int(ssh->conf,
+ CONF_ssh_cipherlist, i);
if (next_cipher == CIPHER_WARN) {
/* If/when we choose a cipher, warn about it */
warn = 1;
ssh->crcda_ctx = crcda_make_context();
logevent("Installing CRC compensation attack detector");
- if (servkey.modulus) {
- sfree(servkey.modulus);
- servkey.modulus = NULL;
+ if (s->servkey.modulus) {
+ sfree(s->servkey.modulus);
+ s->servkey.modulus = NULL;
}
- if (servkey.exponent) {
- sfree(servkey.exponent);
- servkey.exponent = NULL;
+ if (s->servkey.exponent) {
+ sfree(s->servkey.exponent);
+ s->servkey.exponent = NULL;
}
- if (hostkey.modulus) {
- sfree(hostkey.modulus);
- hostkey.modulus = NULL;
+ if (s->hostkey.modulus) {
+ sfree(s->hostkey.modulus);
+ s->hostkey.modulus = NULL;
}
- if (hostkey.exponent) {
- sfree(hostkey.exponent);
- hostkey.exponent = NULL;
+ if (s->hostkey.exponent) {
+ sfree(s->hostkey.exponent);
+ s->hostkey.exponent = NULL;
}
crWaitUntil(pktin);
logevent("Successfully started encryption");
- fflush(stdout);
+ fflush(stdout); /* FIXME eh? */
{
- if (!*ssh->cfg.username) {
- if (ssh_get_line && !ssh_getline_pw_only) {
- if (!ssh_get_line("login as: ",
- s->username, sizeof(s->username), FALSE)) {
- /*
- * get_line failed to get a username.
- * Terminate.
- */
- ssh_disconnect(ssh, "No username provided", NULL, 0, TRUE);
- crStop(1);
- }
- } else {
- int ret; /* need not be kept over crReturn */
- c_write_str(ssh, "login as: ");
+ if ((ssh->username = get_remote_username(ssh->conf)) == NULL) {
+ int ret; /* need not be kept over crReturn */
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH login name");
+ add_prompt(s->cur_prompt, dupstr("login as: "), TRUE);
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
ssh->send_ok = 1;
-
- setup_userpass_input(ssh, s->username, sizeof(s->username), 1);
- do {
- crWaitUntil(!pktin);
- ret = process_userpass_input(ssh, in, inlen);
- } while (ret == 0);
- if (ret < 0)
- cleanup_exit(0);
- c_write_str(ssh, "\r\n");
+ crWaitUntil(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
}
- } else {
- strncpy(s->username, ssh->cfg.username, sizeof(s->username));
- s->username[sizeof(s->username)-1] = '\0';
+ if (!ret) {
+ /*
+ * Failed to get a username. Terminate.
+ */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, "No username provided", NULL, 0, TRUE);
+ crStop(0);
+ }
+ ssh->username = dupstr(s->cur_prompt->prompts[0]->result);
+ free_prompts(s->cur_prompt);
}
- send_packet(ssh, SSH1_CMSG_USER, PKT_STR, s->username, PKT_END);
+ send_packet(ssh, SSH1_CMSG_USER, PKT_STR, ssh->username, PKT_END);
{
- char userlog[22 + sizeof(s->username)];
- sprintf(userlog, "Sent username \"%s\"", s->username);
+ char *userlog = dupprintf("Sent username \"%s\"", ssh->username);
logevent(userlog);
if (flags & FLAG_INTERACTIVE &&
(!((flags & FLAG_STDERR) && (flags & FLAG_VERBOSE)))) {
- strcat(userlog, "\r\n");
c_write_str(ssh, userlog);
+ c_write_str(ssh, "\r\n");
}
+ sfree(userlog);
}
}
crWaitUntil(pktin);
- if ((ssh->remote_bugs & BUG_CHOKES_ON_RSA)) {
+ if ((s->supported_auths_mask & (1 << SSH1_AUTH_RSA)) == 0) {
/* We must not attempt PK auth. Pretend we've already tried it. */
s->tried_publickey = s->tried_agent = 1;
} else {
s->tried_publickey = s->tried_agent = 0;
}
s->tis_auth_refused = s->ccard_auth_refused = 0;
- /* Load the public half of ssh->cfg.keyfile so we notice if it's in Pageant */
- if (!filename_is_null(ssh->cfg.keyfile)) {
- if (!rsakey_pubblob(&ssh->cfg.keyfile,
- &s->publickey_blob, &s->publickey_bloblen, NULL))
+ /*
+ * Load the public half of any configured keyfile for later use.
+ */
+ s->keyfile = conf_get_filename(ssh->conf, CONF_keyfile);
+ if (!filename_is_null(s->keyfile)) {
+ int keytype;
+ logeventf(ssh, "Reading private key file \"%.150s\"",
+ filename_to_str(s->keyfile));
+ keytype = key_type(s->keyfile);
+ if (keytype == SSH_KEYTYPE_SSH1) {
+ const char *error;
+ if (rsakey_pubblob(s->keyfile,
+ &s->publickey_blob, &s->publickey_bloblen,
+ &s->publickey_comment, &error)) {
+ s->publickey_encrypted = rsakey_encrypted(s->keyfile,
+ NULL);
+ } else {
+ char *msgbuf;
+ logeventf(ssh, "Unable to load private key (%s)", error);
+ msgbuf = dupprintf("Unable to load private key file "
+ "\"%.150s\" (%s)\r\n",
+ filename_to_str(s->keyfile),
+ error);
+ c_write_str(ssh, msgbuf);
+ sfree(msgbuf);
+ s->publickey_blob = NULL;
+ }
+ } else {
+ char *msgbuf;
+ logeventf(ssh, "Unable to use this key file (%s)",
+ key_type_to_str(keytype));
+ msgbuf = dupprintf("Unable to use key file \"%.150s\""
+ " (%s)\r\n",
+ filename_to_str(s->keyfile),
+ key_type_to_str(keytype));
+ c_write_str(ssh, msgbuf);
+ sfree(msgbuf);
s->publickey_blob = NULL;
+ }
} else
s->publickey_blob = NULL;
while (pktin->type == SSH1_SMSG_FAILURE) {
s->pwpkt_type = SSH1_CMSG_AUTH_PASSWORD;
- if (agent_exists() && !s->tried_agent) {
+ if (conf_get_int(ssh->conf, CONF_tryagent) && agent_exists() && !s->tried_agent) {
/*
* Attempt RSA authentication using Pageant.
*/
if (s->response && s->responselen >= 5 &&
s->response[4] == SSH1_AGENT_RSA_IDENTITIES_ANSWER) {
s->p = s->response + 5;
- s->nkeys = GET_32BIT(s->p);
+ s->nkeys = toint(GET_32BIT(s->p));
+ if (s->nkeys < 0) {
+ logeventf(ssh, "Pageant reported negative key count %d",
+ s->nkeys);
+ s->nkeys = 0;
+ }
s->p += 4;
logeventf(ssh, "Pageant has %d SSH-1 keys", s->nkeys);
for (s->keyi = 0; s->keyi < s->nkeys; s->keyi++) {
- logeventf(ssh, "Trying Pageant key #%d", s->keyi);
- if (s->publickey_blob &&
- !memcmp(s->p, s->publickey_blob,
- s->publickey_bloblen)) {
- logevent("This key matches configured key file");
- s->tried_publickey = 1;
- }
+ unsigned char *pkblob = s->p;
s->p += 4;
{
int n, ok = FALSE;
do { /* do while (0) to make breaking easy */
n = ssh1_read_bignum
- (s->p, s->responselen-(s->p-s->response),
+ (s->p, toint(s->responselen-(s->p-s->response)),
&s->key.exponent);
if (n < 0)
break;
s->p += n;
n = ssh1_read_bignum
- (s->p, s->responselen-(s->p-s->response),
+ (s->p, toint(s->responselen-(s->p-s->response)),
&s->key.modulus);
if (n < 0)
- break;
+ break;
s->p += n;
if (s->responselen - (s->p-s->response) < 4)
break;
- s->commentlen = GET_32BIT(s->p);
+ s->commentlen = toint(GET_32BIT(s->p));
s->p += 4;
- if (s->responselen - (s->p-s->response) <
+ if (s->commentlen < 0 ||
+ toint(s->responselen - (s->p-s->response)) <
s->commentlen)
break;
s->commentp = (char *)s->p;
break;
}
}
+ if (s->publickey_blob) {
+ if (!memcmp(pkblob, s->publickey_blob,
+ s->publickey_bloblen)) {
+ logeventf(ssh, "Pageant key #%d matches "
+ "configured key file", s->keyi);
+ s->tried_publickey = 1;
+ } else
+ /* Skip non-configured key */
+ continue;
+ }
+ logeventf(ssh, "Trying Pageant key #%d", s->keyi);
send_packet(ssh, SSH1_CMSG_AUTH_RSA,
PKT_BIGNUM, s->key.modulus, PKT_END);
crWaitUntil(pktin);
break;
}
sfree(s->response);
- }
+ if (s->publickey_blob && !s->tried_publickey)
+ logevent("Configured key file not in Pageant");
+ } else {
+ logevent("Failed to get reply from Pageant");
+ }
if (s->authed)
break;
}
- if (!filename_is_null(ssh->cfg.keyfile) && !s->tried_publickey)
- s->pwpkt_type = SSH1_CMSG_AUTH_RSA;
+ if (s->publickey_blob && !s->tried_publickey) {
+ /*
+ * Try public key authentication with the specified
+ * key file.
+ */
+ int got_passphrase; /* need not be kept over crReturn */
+ if (flags & FLAG_VERBOSE)
+ c_write_str(ssh, "Trying public key authentication.\r\n");
+ s->keyfile = conf_get_filename(ssh->conf, CONF_keyfile);
+ logeventf(ssh, "Trying public key \"%s\"",
+ filename_to_str(s->keyfile));
+ s->tried_publickey = 1;
+ got_passphrase = FALSE;
+ while (!got_passphrase) {
+ /*
+ * Get a passphrase, if necessary.
+ */
+ char *passphrase = NULL; /* only written after crReturn */
+ const char *error;
+ if (!s->publickey_encrypted) {
+ if (flags & FLAG_VERBOSE)
+ c_write_str(ssh, "No passphrase required.\r\n");
+ passphrase = NULL;
+ } else {
+ int ret; /* need not be kept over crReturn */
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = FALSE;
+ s->cur_prompt->name = dupstr("SSH key passphrase");
+ add_prompt(s->cur_prompt,
+ dupprintf("Passphrase for key \"%.100s\": ",
+ s->publickey_comment), FALSE);
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntil(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
+ }
+ if (!ret) {
+ /* Failed to get a passphrase. Terminate. */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, NULL, "Unable to authenticate",
+ 0, TRUE);
+ crStop(0);
+ }
+ passphrase = dupstr(s->cur_prompt->prompts[0]->result);
+ free_prompts(s->cur_prompt);
+ }
+ /*
+ * Try decrypting key with passphrase.
+ */
+ s->keyfile = conf_get_filename(ssh->conf, CONF_keyfile);
+ ret = loadrsakey(s->keyfile, &s->key, passphrase,
+ &error);
+ if (passphrase) {
+ smemclr(passphrase, strlen(passphrase));
+ sfree(passphrase);
+ }
+ if (ret == 1) {
+ /* Correct passphrase. */
+ got_passphrase = TRUE;
+ } else if (ret == 0) {
+ c_write_str(ssh, "Couldn't load private key from ");
+ c_write_str(ssh, filename_to_str(s->keyfile));
+ c_write_str(ssh, " (");
+ c_write_str(ssh, error);
+ c_write_str(ssh, ").\r\n");
+ got_passphrase = FALSE;
+ break; /* go and try something else */
+ } else if (ret == -1) {
+ c_write_str(ssh, "Wrong passphrase.\r\n"); /* FIXME */
+ got_passphrase = FALSE;
+ /* and try again */
+ } else {
+ assert(0 && "unexpected return from loadrsakey()");
+ got_passphrase = FALSE; /* placate optimisers */
+ }
+ }
+
+ if (got_passphrase) {
+
+ /*
+ * Send a public key attempt.
+ */
+ send_packet(ssh, SSH1_CMSG_AUTH_RSA,
+ PKT_BIGNUM, s->key.modulus, PKT_END);
+
+ crWaitUntil(pktin);
+ if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused our public key.\r\n");
+ continue; /* go and try something else */
+ }
+ if (pktin->type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
+ bombout(("Bizarre response to offer of public key"));
+ crStop(0);
+ }
+
+ {
+ int i;
+ unsigned char buffer[32];
+ Bignum challenge, response;
+
+ if ((challenge = ssh1_pkt_getmp(pktin)) == NULL) {
+ bombout(("Server's RSA challenge was badly formatted"));
+ crStop(0);
+ }
+ response = rsadecrypt(challenge, &s->key);
+ freebn(s->key.private_exponent);/* burn the evidence */
+
+ for (i = 0; i < 32; i++) {
+ buffer[i] = bignum_byte(response, 31 - i);
+ }
+
+ MD5Init(&md5c);
+ MD5Update(&md5c, buffer, 32);
+ MD5Update(&md5c, s->session_id, 16);
+ MD5Final(buffer, &md5c);
+
+ send_packet(ssh, SSH1_CMSG_AUTH_RSA_RESPONSE,
+ PKT_DATA, buffer, 16, PKT_END);
+
+ freebn(challenge);
+ freebn(response);
+ }
+
+ crWaitUntil(pktin);
+ if (pktin->type == SSH1_SMSG_FAILURE) {
+ if (flags & FLAG_VERBOSE)
+ c_write_str(ssh, "Failed to authenticate with"
+ " our public key.\r\n");
+ continue; /* go and try something else */
+ } else if (pktin->type != SSH1_SMSG_SUCCESS) {
+ bombout(("Bizarre response to RSA authentication response"));
+ crStop(0);
+ }
+
+ break; /* we're through! */
+ }
+
+ }
+
+ /*
+ * Otherwise, try various forms of password-like authentication.
+ */
+ s->cur_prompt = new_prompts(ssh->frontend);
- if (ssh->cfg.try_tis_auth &&
+ if (conf_get_int(ssh->conf, CONF_try_tis_auth) &&
(s->supported_auths_mask & (1 << SSH1_AUTH_TIS)) &&
!s->tis_auth_refused) {
s->pwpkt_type = SSH1_CMSG_AUTH_TIS_RESPONSE;
} else {
char *challenge;
int challengelen;
+ char *instr_suf, *prompt;
ssh_pkt_getstring(pktin, &challenge, &challengelen);
if (!challenge) {
bombout(("TIS challenge packet was badly formed"));
crStop(0);
}
- c_write_str(ssh, "Using TIS authentication.\r\n");
logevent("Received TIS challenge");
- if (challengelen > sizeof(s->prompt) - 1)
- challengelen = sizeof(s->prompt) - 1;/* prevent overrun */
- memcpy(s->prompt, challenge, challengelen);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH TIS authentication");
/* Prompt heuristic comes from OpenSSH */
- strncpy(s->prompt + challengelen,
- memchr(s->prompt, '\n', challengelen) ?
- "": "\r\nResponse: ",
- (sizeof s->prompt) - challengelen);
- s->prompt[(sizeof s->prompt) - 1] = '\0';
+ if (memchr(challenge, '\n', challengelen)) {
+ instr_suf = dupstr("");
+ prompt = dupprintf("%.*s", challengelen, challenge);
+ } else {
+ instr_suf = dupprintf("%.*s", challengelen, challenge);
+ prompt = dupstr("Response: ");
+ }
+ s->cur_prompt->instruction =
+ dupprintf("Using TIS authentication.%s%s",
+ (*instr_suf) ? "\n" : "",
+ instr_suf);
+ s->cur_prompt->instr_reqd = TRUE;
+ add_prompt(s->cur_prompt, prompt, FALSE);
+ sfree(instr_suf);
}
}
- if (ssh->cfg.try_tis_auth &&
+ if (conf_get_int(ssh->conf, CONF_try_tis_auth) &&
(s->supported_auths_mask & (1 << SSH1_AUTH_CCARD)) &&
!s->ccard_auth_refused) {
s->pwpkt_type = SSH1_CMSG_AUTH_CCARD_RESPONSE;
} else {
char *challenge;
int challengelen;
+ char *instr_suf, *prompt;
ssh_pkt_getstring(pktin, &challenge, &challengelen);
if (!challenge) {
bombout(("CryptoCard challenge packet was badly formed"));
crStop(0);
}
- c_write_str(ssh, "Using CryptoCard authentication.\r\n");
logevent("Received CryptoCard challenge");
- if (challengelen > sizeof(s->prompt) - 1)
- challengelen = sizeof(s->prompt) - 1;/* prevent overrun */
- memcpy(s->prompt, challenge, challengelen);
- strncpy(s->prompt + challengelen,
- memchr(s->prompt, '\n', challengelen) ?
- "" : "\r\nResponse: ",
- sizeof(s->prompt) - challengelen);
- s->prompt[sizeof(s->prompt) - 1] = '\0';
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH CryptoCard authentication");
+ s->cur_prompt->name_reqd = FALSE;
+ /* Prompt heuristic comes from OpenSSH */
+ if (memchr(challenge, '\n', challengelen)) {
+ instr_suf = dupstr("");
+ prompt = dupprintf("%.*s", challengelen, challenge);
+ } else {
+ instr_suf = dupprintf("%.*s", challengelen, challenge);
+ prompt = dupstr("Response: ");
+ }
+ s->cur_prompt->instruction =
+ dupprintf("Using CryptoCard authentication.%s%s",
+ (*instr_suf) ? "\n" : "",
+ instr_suf);
+ s->cur_prompt->instr_reqd = TRUE;
+ add_prompt(s->cur_prompt, prompt, FALSE);
+ sfree(instr_suf);
}
}
if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
- sprintf(s->prompt, "%.90s@%.90s's password: ",
- s->username, ssh->savedhost);
- }
- if (s->pwpkt_type == SSH1_CMSG_AUTH_RSA) {
- char *comment = NULL;
- int type;
- if (flags & FLAG_VERBOSE)
- c_write_str(ssh, "Trying public key authentication.\r\n");
- logeventf(ssh, "Trying public key \"%s\"",
- filename_to_str(&ssh->cfg.keyfile));
- type = key_type(&ssh->cfg.keyfile);
- if (type != SSH_KEYTYPE_SSH1) {
- char *msg = dupprintf("Key is of wrong type (%s)",
- key_type_to_str(type));
- logevent(msg);
- c_write_str(ssh, msg);
- c_write_str(ssh, "\r\n");
- sfree(msg);
- s->tried_publickey = 1;
- continue;
- }
- if (!rsakey_encrypted(&ssh->cfg.keyfile, &comment)) {
- if (flags & FLAG_VERBOSE)
- c_write_str(ssh, "No passphrase required.\r\n");
- goto tryauth;
+ if ((s->supported_auths_mask & (1 << SSH1_AUTH_PASSWORD)) == 0) {
+ bombout(("No supported authentication methods available"));
+ crStop(0);
}
- sprintf(s->prompt, "Passphrase for key \"%.100s\": ", comment);
- sfree(comment);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH password");
+ add_prompt(s->cur_prompt, dupprintf("%s@%s's password: ",
+ ssh->username, ssh->savedhost),
+ FALSE);
}
/*
* or CryptoCard exchange if we're doing TIS or CryptoCard
* authentication.
*/
- if (ssh_get_line) {
- if (!ssh_get_line(s->prompt, s->password,
- sizeof(s->password), TRUE)) {
+ {
+ int ret; /* need not be kept over crReturn */
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntil(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
+ }
+ if (!ret) {
/*
- * get_line failed to get a password (for example
+ * Failed to get a password (for example
* because one was supplied on the command line
* which has already failed to work). Terminate.
*/
- ssh_disconnect(ssh, NULL, "Unable to authenticate", 0, FALSE);
- crStop(1);
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, NULL, "Unable to authenticate", 0, TRUE);
+ crStop(0);
}
- } else {
- /* Prompt may have come from server. We've munged it a bit, so
- * we know it to be zero-terminated at least once. */
- int ret; /* need not be saved over crReturn */
- c_write_untrusted(ssh, s->prompt, strlen(s->prompt));
- s->pos = 0;
-
- setup_userpass_input(ssh, s->password, sizeof(s->password), 0);
- do {
- crWaitUntil(!pktin);
- ret = process_userpass_input(ssh, in, inlen);
- } while (ret == 0);
- if (ret < 0)
- cleanup_exit(0);
- c_write_str(ssh, "\r\n");
}
- tryauth:
- if (s->pwpkt_type == SSH1_CMSG_AUTH_RSA) {
- /*
- * Try public key authentication with the specified
- * key file.
- */
- s->tried_publickey = 1;
-
- {
- const char *error = NULL;
- int ret = loadrsakey(&ssh->cfg.keyfile, &s->key, s->password,
- &error);
- if (ret == 0) {
- c_write_str(ssh, "Couldn't load private key from ");
- c_write_str(ssh, filename_to_str(&ssh->cfg.keyfile));
- c_write_str(ssh, " (");
- c_write_str(ssh, error);
- c_write_str(ssh, ").\r\n");
- continue; /* go and try password */
- }
- if (ret == -1) {
- c_write_str(ssh, "Wrong passphrase.\r\n");
- s->tried_publickey = 0;
- continue; /* try again */
- }
- }
-
+ if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
/*
- * Send a public key attempt.
+ * Defence against traffic analysis: we send a
+ * whole bunch of packets containing strings of
+ * different lengths. One of these strings is the
+ * password, in a SSH1_CMSG_AUTH_PASSWORD packet.
+ * The others are all random data in
+ * SSH1_MSG_IGNORE packets. This way a passive
+ * listener can't tell which is the password, and
+ * hence can't deduce the password length.
+ *
+ * Anybody with a password length greater than 16
+ * bytes is going to have enough entropy in their
+ * password that a listener won't find it _that_
+ * much help to know how long it is. So what we'll
+ * do is:
+ *
+ * - if password length < 16, we send 15 packets
+ * containing string lengths 1 through 15
+ *
+ * - otherwise, we let N be the nearest multiple
+ * of 8 below the password length, and send 8
+ * packets containing string lengths N through
+ * N+7. This won't obscure the order of
+ * magnitude of the password length, but it will
+ * introduce a bit of extra uncertainty.
+ *
+ * A few servers can't deal with SSH1_MSG_IGNORE, at
+ * least in this context. For these servers, we need
+ * an alternative defence. We make use of the fact
+ * that the password is interpreted as a C string:
+ * so we can append a NUL, then some random data.
+ *
+ * A few servers can deal with neither SSH1_MSG_IGNORE
+ * here _nor_ a padded password string.
+ * For these servers we are left with no defences
+ * against password length sniffing.
*/
- send_packet(ssh, SSH1_CMSG_AUTH_RSA,
- PKT_BIGNUM, s->key.modulus, PKT_END);
-
- crWaitUntil(pktin);
- if (pktin->type == SSH1_SMSG_FAILURE) {
- c_write_str(ssh, "Server refused our public key.\r\n");
- continue; /* go and try password */
- }
- if (pktin->type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
- bombout(("Bizarre response to offer of public key"));
- crStop(0);
- }
-
- {
- int i;
- unsigned char buffer[32];
- Bignum challenge, response;
-
- if ((challenge = ssh1_pkt_getmp(pktin)) == NULL) {
- bombout(("Server's RSA challenge was badly formatted"));
- crStop(0);
- }
- response = rsadecrypt(challenge, &s->key);
- freebn(s->key.private_exponent);/* burn the evidence */
-
- for (i = 0; i < 32; i++) {
- buffer[i] = bignum_byte(response, 31 - i);
- }
-
- MD5Init(&md5c);
- MD5Update(&md5c, buffer, 32);
- MD5Update(&md5c, s->session_id, 16);
- MD5Final(buffer, &md5c);
-
- send_packet(ssh, SSH1_CMSG_AUTH_RSA_RESPONSE,
- PKT_DATA, buffer, 16, PKT_END);
-
- freebn(challenge);
- freebn(response);
- }
-
- crWaitUntil(pktin);
- if (pktin->type == SSH1_SMSG_FAILURE) {
- if (flags & FLAG_VERBOSE)
- c_write_str(ssh, "Failed to authenticate with"
- " our public key.\r\n");
- continue; /* go and try password */
- } else if (pktin->type != SSH1_SMSG_SUCCESS) {
- bombout(("Bizarre response to RSA authentication response"));
- crStop(0);
- }
-
- break; /* we're through! */
- } else {
- if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
+ if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE) &&
+ !(ssh->remote_bugs & BUG_NEEDS_SSH1_PLAIN_PASSWORD)) {
/*
- * Defence against traffic analysis: we send a
- * whole bunch of packets containing strings of
- * different lengths. One of these strings is the
- * password, in a SSH1_CMSG_AUTH_PASSWORD packet.
- * The others are all random data in
- * SSH1_MSG_IGNORE packets. This way a passive
- * listener can't tell which is the password, and
- * hence can't deduce the password length.
- *
- * Anybody with a password length greater than 16
- * bytes is going to have enough entropy in their
- * password that a listener won't find it _that_
- * much help to know how long it is. So what we'll
- * do is:
- *
- * - if password length < 16, we send 15 packets
- * containing string lengths 1 through 15
- *
- * - otherwise, we let N be the nearest multiple
- * of 8 below the password length, and send 8
- * packets containing string lengths N through
- * N+7. This won't obscure the order of
- * magnitude of the password length, but it will
- * introduce a bit of extra uncertainty.
- *
- * A few servers (the old 1.2.18 through 1.2.22)
- * can't deal with SSH1_MSG_IGNORE. For these
- * servers, we need an alternative defence. We make
- * use of the fact that the password is interpreted
- * as a C string: so we can append a NUL, then some
- * random data.
- *
- * One server (a Cisco one) can deal with neither
- * SSH1_MSG_IGNORE _nor_ a padded password string.
- * For this server we are left with no defences
- * against password length sniffing.
+ * The server can deal with SSH1_MSG_IGNORE, so
+ * we can use the primary defence.
*/
- if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE)) {
- /*
- * The server can deal with SSH1_MSG_IGNORE, so
- * we can use the primary defence.
- */
- int bottom, top, pwlen, i;
- char *randomstr;
+ int bottom, top, pwlen, i;
+ char *randomstr;
- pwlen = strlen(s->password);
- if (pwlen < 16) {
- bottom = 0; /* zero length passwords are OK! :-) */
- top = 15;
- } else {
- bottom = pwlen & ~7;
- top = bottom + 7;
- }
+ pwlen = strlen(s->cur_prompt->prompts[0]->result);
+ if (pwlen < 16) {
+ bottom = 0; /* zero length passwords are OK! :-) */
+ top = 15;
+ } else {
+ bottom = pwlen & ~7;
+ top = bottom + 7;
+ }
- assert(pwlen >= bottom && pwlen <= top);
+ assert(pwlen >= bottom && pwlen <= top);
- randomstr = snewn(top + 1, char);
+ randomstr = snewn(top + 1, char);
- for (i = bottom; i <= top; i++) {
- if (i == pwlen) {
- defer_packet(ssh, s->pwpkt_type,
- PKTT_PASSWORD, PKT_STR, s->password,
- PKTT_OTHER, PKT_END);
- } else {
- for (j = 0; j < i; j++) {
- do {
- randomstr[j] = random_byte();
- } while (randomstr[j] == '\0');
- }
- randomstr[i] = '\0';
- defer_packet(ssh, SSH1_MSG_IGNORE,
- PKT_STR, randomstr, PKT_END);
+ for (i = bottom; i <= top; i++) {
+ if (i == pwlen) {
+ defer_packet(ssh, s->pwpkt_type,
+ PKTT_PASSWORD, PKT_STR,
+ s->cur_prompt->prompts[0]->result,
+ PKTT_OTHER, PKT_END);
+ } else {
+ for (j = 0; j < i; j++) {
+ do {
+ randomstr[j] = random_byte();
+ } while (randomstr[j] == '\0');
}
+ randomstr[i] = '\0';
+ defer_packet(ssh, SSH1_MSG_IGNORE,
+ PKT_STR, randomstr, PKT_END);
}
- logevent("Sending password with camouflage packets");
- ssh_pkt_defersend(ssh);
- sfree(randomstr);
- }
- else if (!(ssh->remote_bugs & BUG_NEEDS_SSH1_PLAIN_PASSWORD)) {
- /*
- * The server can't deal with SSH1_MSG_IGNORE
- * but can deal with padded passwords, so we
- * can use the secondary defence.
- */
- char string[64];
- char *ss;
- int len;
-
- len = strlen(s->password);
- if (len < sizeof(string)) {
- ss = string;
- strcpy(string, s->password);
- len++; /* cover the zero byte */
- while (len < sizeof(string)) {
- string[len++] = (char) random_byte();
- }
- } else {
- ss = s->password;
+ }
+ logevent("Sending password with camouflage packets");
+ ssh_pkt_defersend(ssh);
+ sfree(randomstr);
+ }
+ else if (!(ssh->remote_bugs & BUG_NEEDS_SSH1_PLAIN_PASSWORD)) {
+ /*
+ * The server can't deal with SSH1_MSG_IGNORE
+ * but can deal with padded passwords, so we
+ * can use the secondary defence.
+ */
+ char string[64];
+ char *ss;
+ int len;
+
+ len = strlen(s->cur_prompt->prompts[0]->result);
+ if (len < sizeof(string)) {
+ ss = string;
+ strcpy(string, s->cur_prompt->prompts[0]->result);
+ len++; /* cover the zero byte */
+ while (len < sizeof(string)) {
+ string[len++] = (char) random_byte();
}
- logevent("Sending length-padded password");
- send_packet(ssh, s->pwpkt_type, PKTT_PASSWORD,
- PKT_INT, len, PKT_DATA, ss, len,
- PKTT_OTHER, PKT_END);
} else {
- /*
- * The server has _both_
- * BUG_CHOKES_ON_SSH1_IGNORE and
- * BUG_NEEDS_SSH1_PLAIN_PASSWORD. There is
- * therefore nothing we can do.
- */
- int len;
- len = strlen(s->password);
- logevent("Sending unpadded password");
- send_packet(ssh, s->pwpkt_type,
- PKTT_PASSWORD, PKT_INT, len,
- PKT_DATA, s->password, len,
- PKTT_OTHER, PKT_END);
+ ss = s->cur_prompt->prompts[0]->result;
}
- } else {
+ logevent("Sending length-padded password");
send_packet(ssh, s->pwpkt_type, PKTT_PASSWORD,
- PKT_STR, s->password, PKTT_OTHER, PKT_END);
+ PKT_INT, len, PKT_DATA, ss, len,
+ PKTT_OTHER, PKT_END);
+ } else {
+ /*
+ * The server is believed unable to cope with
+ * any of our password camouflage methods.
+ */
+ int len;
+ len = strlen(s->cur_prompt->prompts[0]->result);
+ logevent("Sending unpadded password");
+ send_packet(ssh, s->pwpkt_type,
+ PKTT_PASSWORD, PKT_INT, len,
+ PKT_DATA, s->cur_prompt->prompts[0]->result, len,
+ PKTT_OTHER, PKT_END);
}
+ } else {
+ send_packet(ssh, s->pwpkt_type, PKTT_PASSWORD,
+ PKT_STR, s->cur_prompt->prompts[0]->result,
+ PKTT_OTHER, PKT_END);
}
logevent("Sent password");
- memset(s->password, 0, strlen(s->password));
+ free_prompts(s->cur_prompt);
crWaitUntil(pktin);
if (pktin->type == SSH1_SMSG_FAILURE) {
if (flags & FLAG_VERBOSE)
}
}
+ /* Clear up */
+ if (s->publickey_blob) {
+ sfree(s->publickey_blob);
+ sfree(s->publickey_comment);
+ }
+
logevent("Authentication successful");
crFinish(1);
}
-void sshfwd_close(struct ssh_channel *c)
+static void ssh_channel_try_eof(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+ assert(c->pending_eof); /* precondition for calling us */
+ if (c->halfopen)
+ return; /* can't close: not even opened yet */
+ if (ssh->version == 2 && bufchain_size(&c->v.v2.outbuffer) > 0)
+ return; /* can't send EOF: pending outgoing data */
+
+ c->pending_eof = FALSE; /* we're about to send it */
+ if (ssh->version == 1) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE, PKT_INT, c->remoteid,
+ PKT_END);
+ c->closes |= CLOSES_SENT_EOF;
+ } else {
+ struct Packet *pktout;
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_EOF);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_send(ssh, pktout);
+ c->closes |= CLOSES_SENT_EOF;
+ ssh2_channel_check_close(c);
+ }
+}
+
+void sshfwd_write_eof(struct ssh_channel *c)
{
Ssh ssh = c->ssh;
if (ssh->state == SSH_STATE_CLOSED)
return;
- if (c && !c->closes) {
- /*
- * If halfopen is true, we have sent
- * CHANNEL_OPEN for this channel, but it hasn't even been
- * acknowledged by the server. So we must set a close flag
- * on it now, and then when the server acks the channel
- * open, we can close it then.
- */
- if (!c->halfopen) {
- if (ssh->version == 1) {
- send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE, PKT_INT, c->remoteid,
- PKT_END);
- } else {
- struct Packet *pktout;
- pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
- ssh2_pkt_adduint32(pktout, c->remoteid);
- ssh2_pkt_send(ssh, pktout);
- }
- }
- c->closes = 1; /* sent MSG_CLOSE */
- if (c->type == CHAN_X11) {
- c->u.x11.s = NULL;
- logevent("Forwarded X11 connection terminated");
- } else if (c->type == CHAN_SOCKDATA ||
- c->type == CHAN_SOCKDATA_DORMANT) {
- c->u.pfd.s = NULL;
- logevent("Forwarded port closed");
- }
+ if (c->closes & CLOSES_SENT_EOF)
+ return;
+
+ c->pending_eof = TRUE;
+ ssh_channel_try_eof(c);
+}
+
+void sshfwd_unclean_close(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+
+ if (ssh->state == SSH_STATE_CLOSED)
+ return;
+
+ switch (c->type) {
+ case CHAN_X11:
+ x11_close(c->u.x11.s);
+ logevent("Forwarded X11 connection terminated due to local error");
+ break;
+ case CHAN_SOCKDATA:
+ case CHAN_SOCKDATA_DORMANT:
+ pfd_close(c->u.pfd.s);
+ logevent("Forwarded port closed due to local error");
+ break;
}
+ c->type = CHAN_ZOMBIE;
+
+ ssh2_channel_check_close(c);
}
int sshfwd_write(struct ssh_channel *c, char *buf, int len)
if (ssh->version == 1) {
send_packet(ssh, SSH1_MSG_CHANNEL_DATA,
PKT_INT, c->remoteid,
- PKTT_DATA,
- PKT_INT, len, PKT_DATA, buf, len,
+ PKT_INT, len, PKTT_DATA, PKT_DATA, buf, len,
PKTT_OTHER, PKT_END);
/*
* In SSH-1 we can return 0 here - implying that forwarded
void sshfwd_unthrottle(struct ssh_channel *c, int bufsize)
{
Ssh ssh = c->ssh;
+ int buflimit;
if (ssh->state == SSH_STATE_CLOSED)
return;
if (ssh->version == 1) {
- if (c->v.v1.throttling && bufsize < SSH1_BUFFER_LIMIT) {
- c->v.v1.throttling = 0;
- ssh1_throttle(ssh, -1);
- }
+ buflimit = SSH1_BUFFER_LIMIT;
} else {
- ssh2_set_window(c, OUR_V2_WINSIZE - bufsize);
+ buflimit = c->v.v2.locmaxwin;
+ ssh2_set_window(c, bufsize < buflimit ? buflimit - bufsize : 0);
+ }
+ if (c->throttling_conn && bufsize <= buflimit) {
+ c->throttling_conn = 0;
+ ssh_throttle_conn(ssh, -1);
}
}
if (qh->msg1 > 0) {
assert(ssh->packet_dispatch[qh->msg1] == ssh_queueing_handler);
- ssh->packet_dispatch[qh->msg1] = NULL;
+ ssh->packet_dispatch[qh->msg1] = ssh->q_saved_handler1;
}
if (qh->msg2 > 0) {
assert(ssh->packet_dispatch[qh->msg2] == ssh_queueing_handler);
- ssh->packet_dispatch[qh->msg2] = NULL;
+ ssh->packet_dispatch[qh->msg2] = ssh->q_saved_handler2;
}
if (qh->next) {
ssh->qhead = qh->next;
if (ssh->qhead->msg1 > 0) {
- assert(ssh->packet_dispatch[ssh->qhead->msg1] == NULL);
+ ssh->q_saved_handler1 = ssh->packet_dispatch[ssh->qhead->msg1];
ssh->packet_dispatch[ssh->qhead->msg1] = ssh_queueing_handler;
}
if (ssh->qhead->msg2 > 0) {
- assert(ssh->packet_dispatch[ssh->qhead->msg2] == NULL);
+ ssh->q_saved_handler2 = ssh->packet_dispatch[ssh->qhead->msg2];
ssh->packet_dispatch[ssh->qhead->msg2] = ssh_queueing_handler;
}
} else {
ssh->qhead = ssh->qtail = NULL;
- ssh->packet_dispatch[pktin->type] = NULL;
}
qh->handler(ssh, pktin, qh->ctx);
ssh->qhead = qh;
if (qh->msg1 > 0) {
- assert(ssh->packet_dispatch[qh->msg1] == NULL);
+ ssh->q_saved_handler1 = ssh->packet_dispatch[ssh->qhead->msg1];
ssh->packet_dispatch[qh->msg1] = ssh_queueing_handler;
}
if (qh->msg2 > 0) {
- assert(ssh->packet_dispatch[qh->msg2] == NULL);
+ ssh->q_saved_handler2 = ssh->packet_dispatch[ssh->qhead->msg2];
ssh->packet_dispatch[qh->msg2] = ssh_queueing_handler;
}
} else {
rpf = del234(ssh->rportfwds, pf);
assert(rpf == pf);
+ pf->pfrec->remote = NULL;
free_rportfwd(pf);
}
}
-static void ssh_setup_portfwd(Ssh ssh, const Config *cfg)
+static void ssh_setup_portfwd(Ssh ssh, Conf *conf)
{
- const char *portfwd_strptr = cfg->portfwd;
struct ssh_portfwd *epf;
int i;
+ char *key, *val;
if (!ssh->portfwds) {
ssh->portfwds = newtree234(ssh_portcmp);
epf->status = DESTROY;
}
- while (*portfwd_strptr) {
+ for (val = conf_get_str_strs(conf, CONF_portfwd, NULL, &key);
+ val != NULL;
+ val = conf_get_str_strs(conf, CONF_portfwd, key, &key)) {
+ char *kp, *kp2, *vp, *vp2;
char address_family, type;
int sport,dport,sserv,dserv;
- char sports[256], dports[256], saddr[256], host[256];
- int n;
+ char *sports, *dports, *saddr, *host;
+
+ kp = key;
address_family = 'A';
type = 'L';
- if (*portfwd_strptr == 'A' ||
- *portfwd_strptr == '4' ||
- *portfwd_strptr == '6')
- address_family = *portfwd_strptr++;
- if (*portfwd_strptr == 'L' ||
- *portfwd_strptr == 'R' ||
- *portfwd_strptr == 'D')
- type = *portfwd_strptr++;
-
- saddr[0] = '\0';
-
- n = 0;
- while (*portfwd_strptr && *portfwd_strptr != '\t') {
- if (*portfwd_strptr == ':') {
- /*
- * We've seen a colon in the middle of the
- * source port number. This means that
- * everything we've seen until now is the
- * source _address_, so we'll move it into
- * saddr and start sports from the beginning
- * again.
- */
- portfwd_strptr++;
- sports[n] = '\0';
- if (ssh->version == 1 && type == 'R') {
- logeventf(ssh, "SSH-1 cannot handle remote source address "
- "spec \"%s\"; ignoring", sports);
- } else
- strcpy(saddr, sports);
- n = 0;
- }
- if (n < lenof(sports)-1) sports[n++] = *portfwd_strptr++;
+ if (*kp == 'A' || *kp == '4' || *kp == '6')
+ address_family = *kp++;
+ if (*kp == 'L' || *kp == 'R')
+ type = *kp++;
+
+ if ((kp2 = strchr(kp, ':')) != NULL) {
+ /*
+ * There's a colon in the middle of the source port
+ * string, which means that the part before it is
+ * actually a source address.
+ */
+ saddr = dupprintf("%.*s", (int)(kp2 - kp), kp);
+ sports = kp2+1;
+ } else {
+ saddr = NULL;
+ sports = kp;
}
- sports[n] = 0;
- if (type != 'D') {
- if (*portfwd_strptr == '\t')
- portfwd_strptr++;
- n = 0;
- while (*portfwd_strptr && *portfwd_strptr != ':') {
- if (n < lenof(host)-1) host[n++] = *portfwd_strptr++;
- }
- host[n] = 0;
- if (*portfwd_strptr == ':')
- portfwd_strptr++;
- n = 0;
- while (*portfwd_strptr) {
- if (n < lenof(dports)-1) dports[n++] = *portfwd_strptr++;
+ sport = atoi(sports);
+ sserv = 0;
+ if (sport == 0) {
+ sserv = 1;
+ sport = net_service_lookup(sports);
+ if (!sport) {
+ logeventf(ssh, "Service lookup failed for source"
+ " port \"%s\"", sports);
}
- dports[n] = 0;
- portfwd_strptr++;
+ }
+
+ if (type == 'L' && !strcmp(val, "D")) {
+ /* dynamic forwarding */
+ host = NULL;
+ dports = NULL;
+ dport = -1;
+ dserv = 0;
+ type = 'D';
+ } else {
+ /* ordinary forwarding */
+ vp = val;
+ vp2 = vp + strcspn(vp, ":");
+ host = dupprintf("%.*s", (int)(vp2 - vp), vp);
+ if (vp2)
+ vp2++;
+ dports = vp2;
dport = atoi(dports);
dserv = 0;
if (dport == 0) {
" port \"%s\"", dports);
}
}
- } else {
- while (*portfwd_strptr) portfwd_strptr++;
- host[0] = 0;
- dports[0] = 0;
- dport = dserv = -1;
- portfwd_strptr++; /* eat the NUL and move to next one */
- }
- sport = atoi(sports);
- sserv = 0;
- if (sport == 0) {
- sserv = 1;
- sport = net_service_lookup(sports);
- if (!sport) {
- logeventf(ssh, "Service lookup failed for source"
- " port \"%s\"", sports);
- }
}
+
if (sport && dport) {
/* Set up a description of the source port. */
struct ssh_portfwd *pfrec, *epfrec;
pfrec = snew(struct ssh_portfwd);
pfrec->type = type;
- pfrec->saddr = *saddr ? dupstr(saddr) : NULL;
+ pfrec->saddr = saddr;
pfrec->sserv = sserv ? dupstr(sports) : NULL;
pfrec->sport = sport;
- pfrec->daddr = *host ? dupstr(host) : NULL;
+ pfrec->daddr = host;
pfrec->dserv = dserv ? dupstr(dports) : NULL;
pfrec->dport = dport;
pfrec->local = NULL;
epfrec = add234(ssh->portfwds, pfrec);
if (epfrec != pfrec) {
+ if (epfrec->status == DESTROY) {
+ /*
+ * We already have a port forwarding up and running
+ * with precisely these parameters. Hence, no need
+ * to do anything; simply re-tag the existing one
+ * as KEEP.
+ */
+ epfrec->status = KEEP;
+ }
/*
- * We already have a port forwarding with precisely
- * these parameters. Hence, no need to do anything;
- * simply tag the existing one as KEEP.
+ * Anything else indicates that there was a duplicate
+ * in our input, which we'll silently ignore.
*/
- epfrec->status = KEEP;
free_portfwd(pfrec);
} else {
pfrec->status = CREATE;
}
+ } else {
+ sfree(saddr);
+ sfree(host);
}
}
logeventf(ssh, "Cancelling %s", message);
sfree(message);
+ /* epf->remote or epf->local may be NULL if setting up a
+ * forwarding failed. */
if (epf->remote) {
struct ssh_rportfwd *rpf = epf->remote;
struct Packet *pktout;
ssh2_pkt_addbool(pktout, 0);/* _don't_ want reply */
if (epf->saddr) {
ssh2_pkt_addstring(pktout, epf->saddr);
- } else if (ssh->cfg.rport_acceptall) {
- /* XXX: ssh->cfg.rport_acceptall may not represent
+ } else if (conf_get_int(conf, CONF_rport_acceptall)) {
+ /* XXX: rport_acceptall may not represent
* what was used to open the original connection,
* since it's reconfigurable. */
- ssh2_pkt_addstring(pktout, "0.0.0.0");
+ ssh2_pkt_addstring(pktout, "");
} else {
- ssh2_pkt_addstring(pktout, "127.0.0.1");
+ ssh2_pkt_addstring(pktout, "localhost");
}
ssh2_pkt_adduint32(pktout, epf->sport);
ssh2_pkt_send(ssh, pktout);
if (epf->type == 'L') {
const char *err = pfd_addforward(epf->daddr, epf->dport,
epf->saddr, epf->sport,
- ssh, cfg,
+ ssh, conf,
&epf->local,
epf->addressfamily);
} else if (epf->type == 'D') {
const char *err = pfd_addforward(NULL, -1,
epf->saddr, epf->sport,
- ssh, cfg,
+ ssh, conf,
&epf->local,
epf->addressfamily);
ssh2_pkt_addbool(pktout, 1);/* want reply */
if (epf->saddr) {
ssh2_pkt_addstring(pktout, epf->saddr);
- } else if (cfg->rport_acceptall) {
- ssh2_pkt_addstring(pktout, "0.0.0.0");
+ } else if (conf_get_int(conf, CONF_rport_acceptall)) {
+ ssh2_pkt_addstring(pktout, "");
} else {
- ssh2_pkt_addstring(pktout, "127.0.0.1");
+ ssh2_pkt_addstring(pktout, "localhost");
}
ssh2_pkt_adduint32(pktout, epf->sport);
ssh2_pkt_send(ssh, pktout);
string, stringlen);
if (!ssh->v1_stdout_throttling && bufsize > SSH1_BUFFER_LIMIT) {
ssh->v1_stdout_throttling = 1;
- ssh1_throttle(ssh, +1);
+ ssh_throttle_conn(ssh, +1);
}
}
c = snew(struct ssh_channel);
c->ssh = ssh;
- if (x11_init(&c->u.x11.s, ssh->cfg.x11_display, c,
- ssh->x11auth, NULL, -1, &ssh->cfg) != NULL) {
+ if (x11_init(&c->u.x11.s, ssh->x11disp, c,
+ NULL, -1, ssh->conf) != NULL) {
logevent("Opening X11 forward connection failed");
sfree(c);
send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
c->halfopen = FALSE;
c->localid = alloc_channel_id(ssh);
c->closes = 0;
- c->v.v1.throttling = 0;
+ c->pending_eof = FALSE;
+ c->throttling_conn = 0;
c->type = CHAN_X11; /* identify channel type */
add234(ssh->channels, c);
send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
c->halfopen = FALSE;
c->localid = alloc_channel_id(ssh);
c->closes = 0;
- c->v.v1.throttling = 0;
+ c->pending_eof = FALSE;
+ c->throttling_conn = 0;
c->type = CHAN_AGENT; /* identify channel type */
c->u.a.lensofar = 0;
+ c->u.a.message = NULL;
+ c->u.a.outstanding_requests = 0;
add234(ssh->channels, c);
send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
PKT_INT, c->remoteid, PKT_INT, c->localid,
{
/* Remote side is trying to open a channel to talk to a
* forwarded port. Give them back a local channel number. */
- struct ssh_channel *c;
struct ssh_rportfwd pf, *pfp;
int remoteid;
int hostsize, port;
char *host;
const char *e;
- c = snew(struct ssh_channel);
- c->ssh = ssh;
remoteid = ssh_pkt_getuint32(pktin);
ssh_pkt_getstring(pktin, &host, &hostsize);
send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
PKT_INT, remoteid, PKT_END);
} else {
+ struct ssh_channel *c = snew(struct ssh_channel);
+ c->ssh = ssh;
+
logeventf(ssh, "Received remote port open request for %s:%d",
pf.dhost, port);
e = pfd_newconnect(&c->u.pfd.s, pf.dhost, port,
- c, &ssh->cfg, pfp->pfrec->addressfamily);
+ c, ssh->conf, pfp->pfrec->addressfamily);
if (e != NULL) {
logeventf(ssh, "Port open failed: %s", e);
sfree(c);
c->halfopen = FALSE;
c->localid = alloc_channel_id(ssh);
c->closes = 0;
- c->v.v1.throttling = 0;
+ c->pending_eof = FALSE;
+ c->throttling_conn = 0;
c->type = CHAN_SOCKDATA; /* identify channel type */
add234(ssh->channels, c);
send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
c->remoteid = localid;
c->halfopen = FALSE;
c->type = CHAN_SOCKDATA;
- c->v.v1.throttling = 0;
+ c->throttling_conn = 0;
pfd_confirm(c->u.pfd.s);
}
- if (c && c->closes) {
+ if (c && c->pending_eof) {
/*
* We have a pending close on this channel,
* which we decided on before the server acked
* the channel open. So now we know the
* remoteid, we can close it again.
*/
- send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE,
- PKT_INT, c->remoteid, PKT_END);
+ ssh_channel_try_eof(c);
}
}
struct ssh_channel *c;
c = find234(ssh->channels, &i, ssh_channelfind);
if (c && !c->halfopen) {
- int closetype;
- closetype =
- (pktin->type == SSH1_MSG_CHANNEL_CLOSE ? 1 : 2);
-
- if ((c->closes == 0) && (c->type == CHAN_X11)) {
- logevent("Forwarded X11 connection terminated");
- assert(c->u.x11.s != NULL);
- x11_close(c->u.x11.s);
- c->u.x11.s = NULL;
- }
- if ((c->closes == 0) && (c->type == CHAN_SOCKDATA)) {
- logevent("Forwarded port closed");
- assert(c->u.pfd.s != NULL);
- pfd_close(c->u.pfd.s);
- c->u.pfd.s = NULL;
- }
- c->closes |= (closetype << 2); /* seen this message */
- if (!(c->closes & closetype)) {
- send_packet(ssh, pktin->type, PKT_INT, c->remoteid,
- PKT_END);
- c->closes |= closetype; /* sent it too */
- }
+ if (pktin->type == SSH1_MSG_CHANNEL_CLOSE &&
+ !(c->closes & CLOSES_RCVD_EOF)) {
+ /*
+ * Received CHANNEL_CLOSE, which we translate into
+ * outgoing EOF.
+ */
+ int send_close = FALSE;
- if (c->closes == 15) {
- del234(ssh->channels, c);
- sfree(c);
- }
+ c->closes |= CLOSES_RCVD_EOF;
+
+ switch (c->type) {
+ case CHAN_X11:
+ if (c->u.x11.s)
+ x11_send_eof(c->u.x11.s);
+ else
+ send_close = TRUE;
+ break;
+ case CHAN_SOCKDATA:
+ if (c->u.pfd.s)
+ pfd_send_eof(c->u.pfd.s);
+ else
+ send_close = TRUE;
+ break;
+ case CHAN_AGENT:
+ send_close = TRUE;
+ break;
+ }
+
+ if (send_close && !(c->closes & CLOSES_SENT_EOF)) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE, PKT_INT, c->remoteid,
+ PKT_END);
+ c->closes |= CLOSES_SENT_EOF;
+ }
+ }
+
+ if (pktin->type == SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION &&
+ !(c->closes & CLOSES_RCVD_CLOSE)) {
+
+ if (!(c->closes & CLOSES_SENT_EOF)) {
+ bombout(("Received CHANNEL_CLOSE_CONFIRMATION for channel %d"
+ " for which we never sent CHANNEL_CLOSE\n", i));
+ }
+
+ c->closes |= CLOSES_RCVD_CLOSE;
+ }
+
+ if (!((CLOSES_SENT_EOF | CLOSES_RCVD_EOF) & ~c->closes) &&
+ !(c->closes & CLOSES_SENT_CLOSE)) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION,
+ PKT_INT, c->remoteid, PKT_END);
+ c->closes |= CLOSES_SENT_CLOSE;
+ }
+
+ if (!((CLOSES_SENT_CLOSE | CLOSES_RCVD_CLOSE) & ~c->closes))
+ ssh_channel_destroy(c);
} else {
bombout(("Received CHANNEL_CLOSE%s for %s channel %d\n",
pktin->type == SSH1_MSG_CHANNEL_CLOSE ? "" :
/* Data for an agent message. Buffer it. */
while (len > 0) {
if (c->u.a.lensofar < 4) {
- unsigned int l = min(4 - c->u.a.lensofar, len);
+ unsigned int l = min(4 - c->u.a.lensofar, (unsigned)len);
memcpy(c->u.a.msglen + c->u.a.lensofar, p,
l);
p += l;
if (c->u.a.lensofar >= 4 && len > 0) {
unsigned int l =
min(c->u.a.totallen - c->u.a.lensofar,
- len);
+ (unsigned)len);
memcpy(c->u.a.message + c->u.a.lensofar, p,
l);
p += l;
if (c->u.a.lensofar == c->u.a.totallen) {
void *reply;
int replylen;
+ c->u.a.outstanding_requests++;
if (agent_query(c->u.a.message,
c->u.a.totallen,
&reply, &replylen,
bufsize = 0; /* agent channels never back up */
break;
}
- if (!c->v.v1.throttling && bufsize > SSH1_BUFFER_LIMIT) {
- c->v.v1.throttling = 1;
- ssh1_throttle(ssh, +1);
+ if (!c->throttling_conn && bufsize > SSH1_BUFFER_LIMIT) {
+ c->throttling_conn = 1;
+ ssh_throttle_conn(ssh, +1);
}
}
}
ssh->packet_dispatch[SSH1_MSG_CHANNEL_DATA] = ssh1_msg_channel_data;
ssh->packet_dispatch[SSH1_SMSG_EXIT_STATUS] = ssh1_smsg_exit_status;
- if (ssh->cfg.agentfwd && agent_exists()) {
+ if (conf_get_int(ssh->conf, CONF_agentfwd) && agent_exists()) {
logevent("Requesting agent forwarding");
send_packet(ssh, SSH1_CMSG_AGENT_REQUEST_FORWARDING, PKT_END);
do {
}
}
- if (ssh->cfg.x11_forward) {
- char proto[20], data[64];
+ if (conf_get_int(ssh->conf, CONF_x11_forward) &&
+ (ssh->x11disp = x11_setup_display(conf_get_str(ssh->conf, CONF_x11_display),
+ conf_get_int(ssh->conf, CONF_x11_auth), ssh->conf))) {
logevent("Requesting X11 forwarding");
- ssh->x11auth = x11_invent_auth(proto, sizeof(proto),
- data, sizeof(data), ssh->cfg.x11_auth);
- x11_get_real_auth(ssh->x11auth, ssh->cfg.x11_display);
/*
* Note that while we blank the X authentication data here, we don't
* take any special action to blank the start of an X11 channel,
*/
if (ssh->v1_local_protoflags & SSH1_PROTOFLAG_SCREEN_NUMBER) {
send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
- PKT_STR, proto,
- PKTT_PASSWORD, PKT_STR, data, PKTT_OTHER,
- PKT_INT, x11_get_screen_number(ssh->cfg.x11_display),
+ PKT_STR, ssh->x11disp->remoteauthprotoname,
+ PKTT_PASSWORD,
+ PKT_STR, ssh->x11disp->remoteauthdatastring,
+ PKTT_OTHER,
+ PKT_INT, ssh->x11disp->screennum,
PKT_END);
} else {
send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
- PKT_STR, proto,
- PKTT_PASSWORD, PKT_STR, data, PKTT_OTHER, PKT_END);
+ PKT_STR, ssh->x11disp->remoteauthprotoname,
+ PKTT_PASSWORD,
+ PKT_STR, ssh->x11disp->remoteauthdatastring,
+ PKTT_OTHER,
+ PKT_END);
}
do {
crReturnV;
}
}
- ssh_setup_portfwd(ssh, &ssh->cfg);
+ ssh_setup_portfwd(ssh, ssh->conf);
ssh->packet_dispatch[SSH1_MSG_PORT_OPEN] = ssh1_msg_port_open;
- if (!ssh->cfg.nopty) {
+ if (!conf_get_int(ssh->conf, CONF_nopty)) {
struct Packet *pkt;
/* Unpick the terminal-speed string. */
/* XXX perhaps we should allow no speeds to be sent. */
ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
- sscanf(ssh->cfg.termspeed, "%d,%d", &ssh->ospeed, &ssh->ispeed);
+ sscanf(conf_get_str(ssh->conf, CONF_termspeed), "%d,%d", &ssh->ospeed, &ssh->ispeed);
/* Send the pty request. */
pkt = ssh1_pkt_init(SSH1_CMSG_REQUEST_PTY);
- ssh_pkt_addstring(pkt, ssh->cfg.termtype);
+ ssh_pkt_addstring(pkt, conf_get_str(ssh->conf, CONF_termtype));
ssh_pkt_adduint32(pkt, ssh->term_height);
ssh_pkt_adduint32(pkt, ssh->term_width);
ssh_pkt_adduint32(pkt, 0); /* width in pixels */
ssh_pkt_adduint32(pkt, 0); /* height in pixels */
- parse_ttymodes(ssh, ssh->cfg.ttymodes,
- ssh1_send_ttymode, (void *)pkt);
+ parse_ttymodes(ssh, ssh1_send_ttymode, (void *)pkt);
ssh_pkt_addbyte(pkt, SSH1_TTY_OP_ISPEED);
ssh_pkt_adduint32(pkt, ssh->ispeed);
ssh_pkt_addbyte(pkt, SSH1_TTY_OP_OSPEED);
} else if (pktin->type == SSH1_SMSG_FAILURE) {
c_write_str(ssh, "Server refused to allocate pty\r\n");
ssh->editing = ssh->echoing = 1;
- }
- logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
- ssh->ospeed, ssh->ispeed);
+ } else {
+ logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
+ ssh->ospeed, ssh->ispeed);
+ ssh->got_pty = TRUE;
+ }
} else {
ssh->editing = ssh->echoing = 1;
}
- if (ssh->cfg.compression) {
+ if (conf_get_int(ssh->conf, CONF_compression)) {
send_packet(ssh, SSH1_CMSG_REQUEST_COMPRESSION, PKT_INT, 6, PKT_END);
do {
crReturnV;
* exists, we fall straight back to that.
*/
{
- char *cmd = ssh->cfg.remote_cmd_ptr;
-
- if (!cmd) cmd = ssh->cfg.remote_cmd;
+ char *cmd = conf_get_str(ssh->conf, CONF_remote_cmd);
- if (ssh->cfg.ssh_subsys && ssh->cfg.remote_cmd_ptr2) {
- cmd = ssh->cfg.remote_cmd_ptr2;
+ if (conf_get_int(ssh->conf, CONF_ssh_subsys) &&
+ conf_get_str(ssh->conf, CONF_remote_cmd2)) {
+ cmd = conf_get_str(ssh->conf, CONF_remote_cmd2);
ssh->fallback_cmd = TRUE;
}
if (*cmd)
} else {
while (inlen > 0) {
int len = min(inlen, 512);
- send_packet(ssh, SSH1_CMSG_STDIN_DATA, PKTT_DATA,
- PKT_INT, len, PKT_DATA, in, len,
+ send_packet(ssh, SSH1_CMSG_STDIN_DATA,
+ PKT_INT, len, PKTT_DATA, PKT_DATA, in, len,
PKTT_OTHER, PKT_END);
in += len;
inlen -= len;
/*
* SSH-2 key creation method.
+ * (Currently assumes 2 lots of any hash are sufficient to generate
+ * keys/IVs for any cipher/MAC. SSH2_MKKEY_ITERS documents this assumption.)
*/
+#define SSH2_MKKEY_ITERS (2)
static void ssh2_mkkey(Ssh ssh, Bignum K, unsigned char *H, char chr,
unsigned char *keyspace)
{
/*
* Handle the SSH-2 transport layer.
*/
-static int do_ssh2_transport(Ssh ssh, void *vin, int inlen,
+static void do_ssh2_transport(Ssh ssh, void *vin, int inlen,
struct Packet *pktin)
{
unsigned char *in = (unsigned char *)vin;
struct do_ssh2_transport_state {
+ int crLine;
int nbits, pbits, warn_kex, warn_cscipher, warn_sccipher;
Bignum p, g, e, f, K;
void *our_kexinit;
const struct ssh_mac *scmac_tobe;
const struct ssh_compress *cscomp_tobe;
const struct ssh_compress *sccomp_tobe;
- char *hostkeydata, *sigdata, *keystr, *fingerprint;
- int hostkeylen, siglen;
+ char *hostkeydata, *sigdata, *rsakeydata, *keystr, *fingerprint;
+ int hostkeylen, siglen, rsakeylen;
void *hkey; /* actual host key */
- unsigned char exchange_hash[32];
+ void *rsakey; /* for RSA kex */
+ unsigned char exchange_hash[SSH2_KEX_MAX_HASH_LEN];
int n_preferred_kex;
const struct ssh_kexes *preferred_kex[KEX_MAX];
int n_preferred_ciphers;
const struct ssh2_ciphers *preferred_ciphers[CIPHER_MAX];
const struct ssh_compress *preferred_comp;
+ int userauth_succeeded; /* for delayed compression */
+ int pending_compression;
int got_session_id, activated_authconn;
struct Packet *pktout;
int dlgret;
};
crState(do_ssh2_transport_state);
- crBegin(ssh->do_ssh2_transport_crstate);
+ crBeginState;
s->cscipher_tobe = s->sccipher_tobe = NULL;
s->csmac_tobe = s->scmac_tobe = NULL;
s->cscomp_tobe = s->sccomp_tobe = NULL;
s->got_session_id = s->activated_authconn = FALSE;
+ s->userauth_succeeded = FALSE;
+ s->pending_compression = FALSE;
/*
* Be prepared to work around the buggy MAC problem.
s->maclist = macs, s->nmacs = lenof(macs);
begin_key_exchange:
- ssh->pkt_ctx &= ~SSH2_PKTCTX_KEX_MASK;
+ ssh->pkt_kctx = SSH2_PKTCTX_NOKEX;
{
- int i, j, commalist_started;
+ int i, j, k, commalist_started;
/*
* Set up the preferred key exchange. (NULL => warn below here)
*/
s->n_preferred_kex = 0;
for (i = 0; i < KEX_MAX; i++) {
- switch (ssh->cfg.ssh_kexlist[i]) {
+ switch (conf_get_int_int(ssh->conf, CONF_ssh_kexlist, i)) {
case KEX_DHGEX:
s->preferred_kex[s->n_preferred_kex++] =
&ssh_diffiehellman_gex;
s->preferred_kex[s->n_preferred_kex++] =
&ssh_diffiehellman_group1;
break;
- case CIPHER_WARN:
+ case KEX_RSA:
+ s->preferred_kex[s->n_preferred_kex++] =
+ &ssh_rsa_kex;
+ break;
+ case KEX_WARN:
/* Flag for later. Don't bother if it's the last in
* the list. */
if (i < KEX_MAX - 1) {
*/
s->n_preferred_ciphers = 0;
for (i = 0; i < CIPHER_MAX; i++) {
- switch (ssh->cfg.ssh_cipherlist[i]) {
+ switch (conf_get_int_int(ssh->conf, CONF_ssh_cipherlist, i)) {
case CIPHER_BLOWFISH:
s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_blowfish;
break;
case CIPHER_DES:
- if (ssh->cfg.ssh2_des_cbc) {
+ if (conf_get_int(ssh->conf, CONF_ssh2_des_cbc)) {
s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_des;
}
break;
/*
* Set up preferred compression.
*/
- if (ssh->cfg.compression)
+ if (conf_get_int(ssh->conf, CONF_compression))
s->preferred_comp = &ssh_zlib;
else
s->preferred_comp = &ssh_comp_none;
if (i < lenof(hostkey_algs) - 1)
ssh2_pkt_addstring_str(s->pktout, ",");
}
- /* List client->server encryption algorithms. */
- ssh2_pkt_addstring_start(s->pktout);
- commalist_started = 0;
- for (i = 0; i < s->n_preferred_ciphers; i++) {
- const struct ssh2_ciphers *c = s->preferred_ciphers[i];
- if (!c) continue; /* warning flag */
- for (j = 0; j < c->nciphers; j++) {
- if (commalist_started)
- ssh2_pkt_addstring_str(s->pktout, ",");
- ssh2_pkt_addstring_str(s->pktout, c->list[j]->name);
- commalist_started = 1;
+ /* List encryption algorithms (client->server then server->client). */
+ for (k = 0; k < 2; k++) {
+ ssh2_pkt_addstring_start(s->pktout);
+ commalist_started = 0;
+ for (i = 0; i < s->n_preferred_ciphers; i++) {
+ const struct ssh2_ciphers *c = s->preferred_ciphers[i];
+ if (!c) continue; /* warning flag */
+ for (j = 0; j < c->nciphers; j++) {
+ if (commalist_started)
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, c->list[j]->name);
+ commalist_started = 1;
+ }
}
}
- /* List server->client encryption algorithms. */
- ssh2_pkt_addstring_start(s->pktout);
- commalist_started = 0;
- for (i = 0; i < s->n_preferred_ciphers; i++) {
- const struct ssh2_ciphers *c = s->preferred_ciphers[i];
- if (!c) continue; /* warning flag */
- for (j = 0; j < c->nciphers; j++) {
- if (commalist_started)
+ /* List MAC algorithms (client->server then server->client). */
+ for (j = 0; j < 2; j++) {
+ ssh2_pkt_addstring_start(s->pktout);
+ for (i = 0; i < s->nmacs; i++) {
+ ssh2_pkt_addstring_str(s->pktout, s->maclist[i]->name);
+ if (i < s->nmacs - 1)
ssh2_pkt_addstring_str(s->pktout, ",");
- ssh2_pkt_addstring_str(s->pktout, c->list[j]->name);
- commalist_started = 1;
}
}
- /* List client->server MAC algorithms. */
- ssh2_pkt_addstring_start(s->pktout);
- for (i = 0; i < s->nmacs; i++) {
- ssh2_pkt_addstring_str(s->pktout, s->maclist[i]->name);
- if (i < s->nmacs - 1)
- ssh2_pkt_addstring_str(s->pktout, ",");
- }
- /* List server->client MAC algorithms. */
- ssh2_pkt_addstring_start(s->pktout);
- for (i = 0; i < s->nmacs; i++) {
- ssh2_pkt_addstring_str(s->pktout, s->maclist[i]->name);
- if (i < s->nmacs - 1)
- ssh2_pkt_addstring_str(s->pktout, ",");
- }
- /* List client->server compression algorithms. */
- ssh2_pkt_addstring_start(s->pktout);
- assert(lenof(compressions) > 1);
- ssh2_pkt_addstring_str(s->pktout, s->preferred_comp->name);
- for (i = 0; i < lenof(compressions); i++) {
- const struct ssh_compress *c = compressions[i];
- if (c != s->preferred_comp) {
+ /* List client->server compression algorithms,
+ * then server->client compression algorithms. (We use the
+ * same set twice.) */
+ for (j = 0; j < 2; j++) {
+ ssh2_pkt_addstring_start(s->pktout);
+ assert(lenof(compressions) > 1);
+ /* Prefer non-delayed versions */
+ ssh2_pkt_addstring_str(s->pktout, s->preferred_comp->name);
+ /* We don't even list delayed versions of algorithms until
+ * they're allowed to be used, to avoid a race. See the end of
+ * this function. */
+ if (s->userauth_succeeded && s->preferred_comp->delayed_name) {
ssh2_pkt_addstring_str(s->pktout, ",");
- ssh2_pkt_addstring_str(s->pktout, c->name);
+ ssh2_pkt_addstring_str(s->pktout,
+ s->preferred_comp->delayed_name);
}
- }
- /* List server->client compression algorithms. */
- ssh2_pkt_addstring_start(s->pktout);
- assert(lenof(compressions) > 1);
- ssh2_pkt_addstring_str(s->pktout, s->preferred_comp->name);
- for (i = 0; i < lenof(compressions); i++) {
- const struct ssh_compress *c = compressions[i];
- if (c != s->preferred_comp) {
- ssh2_pkt_addstring_str(s->pktout, ",");
- ssh2_pkt_addstring_str(s->pktout, c->name);
+ for (i = 0; i < lenof(compressions); i++) {
+ const struct ssh_compress *c = compressions[i];
+ if (c != s->preferred_comp) {
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, c->name);
+ if (s->userauth_succeeded && c->delayed_name) {
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, c->delayed_name);
+ }
+ }
}
}
/* List client->server languages. Empty list. */
ssh2_pkt_send_noqueue(ssh, s->pktout);
if (!pktin)
- crWaitUntil(pktin);
+ crWaitUntilV(pktin);
/*
* Now examine the other side's KEXINIT to see what we're up
if (pktin->type != SSH2_MSG_KEXINIT) {
bombout(("expected key exchange packet from server"));
- crStop(0);
+ crStopV;
}
ssh->kex = NULL;
ssh->hostkey = NULL;
if (!ssh->kex) {
bombout(("Couldn't agree a key exchange algorithm (available: %s)",
str ? str : "(null)"));
- crStop(0);
+ crStopV;
}
/*
* Note that the server's guess is considered wrong if it doesn't match
break;
}
}
+ if (!ssh->hostkey) {
+ bombout(("Couldn't agree a host key algorithm (available: %s)",
+ str ? str : "(null)"));
+ crStopV;
+ }
+
s->guessok = s->guessok &&
first_in_commasep_string(hostkey_algs[0]->name, str, len);
ssh_pkt_getstring(pktin, &str, &len); /* client->server cipher */
if (!s->cscipher_tobe) {
bombout(("Couldn't agree a client-to-server cipher (available: %s)",
str ? str : "(null)"));
- crStop(0);
+ crStopV;
}
ssh_pkt_getstring(pktin, &str, &len); /* server->client cipher */
if (!s->sccipher_tobe) {
bombout(("Couldn't agree a server-to-client cipher (available: %s)",
str ? str : "(null)"));
- crStop(0);
+ crStopV;
}
ssh_pkt_getstring(pktin, &str, &len); /* client->server mac */
if (in_commasep_string(c->name, str, len)) {
s->cscomp_tobe = c;
break;
+ } else if (in_commasep_string(c->delayed_name, str, len)) {
+ if (s->userauth_succeeded) {
+ s->cscomp_tobe = c;
+ break;
+ } else {
+ s->pending_compression = TRUE; /* try this later */
+ }
}
}
ssh_pkt_getstring(pktin, &str, &len); /* server->client compression */
if (in_commasep_string(c->name, str, len)) {
s->sccomp_tobe = c;
break;
+ } else if (in_commasep_string(c->delayed_name, str, len)) {
+ if (s->userauth_succeeded) {
+ s->sccomp_tobe = c;
+ break;
+ } else {
+ s->pending_compression = TRUE; /* try this later */
+ }
}
}
+ if (s->pending_compression) {
+ logevent("Server supports delayed compression; "
+ "will try this later");
+ }
ssh_pkt_getstring(pktin, &str, &len); /* client->server language */
ssh_pkt_getstring(pktin, &str, &len); /* server->client language */
s->ignorepkt = ssh2_pkt_getbool(pktin) && !s->guessok;
+ ssh->exhash = ssh->kex->hash->init();
+ hash_string(ssh->kex->hash, ssh->exhash, ssh->v_c, strlen(ssh->v_c));
+ hash_string(ssh->kex->hash, ssh->exhash, ssh->v_s, strlen(ssh->v_s));
+ hash_string(ssh->kex->hash, ssh->exhash,
+ s->our_kexinit, s->our_kexinitlen);
+ sfree(s->our_kexinit);
+ if (pktin->length > 5)
+ hash_string(ssh->kex->hash, ssh->exhash,
+ pktin->data + 5, pktin->length - 5);
+
if (s->warn_kex) {
ssh_set_frozen(ssh, 1);
s->dlgret = askalg(ssh->frontend, "key-exchange algorithm",
ssh_dialog_callback, ssh);
if (s->dlgret < 0) {
do {
- crReturn(0);
+ crReturnV;
if (pktin) {
bombout(("Unexpected data from server while"
" waiting for user response"));
- crStop(0);
+ crStopV;
}
} while (pktin || inlen > 0);
s->dlgret = ssh->user_response;
if (s->dlgret == 0) {
ssh_disconnect(ssh, "User aborted at kex warning", NULL,
0, TRUE);
- crStop(0);
+ crStopV;
}
}
ssh_dialog_callback, ssh);
if (s->dlgret < 0) {
do {
- crReturn(0);
+ crReturnV;
if (pktin) {
bombout(("Unexpected data from server while"
" waiting for user response"));
- crStop(0);
+ crStopV;
}
} while (pktin || inlen > 0);
s->dlgret = ssh->user_response;
if (s->dlgret == 0) {
ssh_disconnect(ssh, "User aborted at cipher warning", NULL,
0, TRUE);
- crStop(0);
+ crStopV;
}
}
ssh_dialog_callback, ssh);
if (s->dlgret < 0) {
do {
- crReturn(0);
+ crReturnV;
if (pktin) {
bombout(("Unexpected data from server while"
" waiting for user response"));
- crStop(0);
+ crStopV;
}
} while (pktin || inlen > 0);
s->dlgret = ssh->user_response;
if (s->dlgret == 0) {
ssh_disconnect(ssh, "User aborted at cipher warning", NULL,
0, TRUE);
- crStop(0);
+ crStopV;
}
}
- ssh->exhash = ssh->kex->hash->init();
- hash_string(ssh->kex->hash, ssh->exhash, ssh->v_c, strlen(ssh->v_c));
- hash_string(ssh->kex->hash, ssh->exhash, ssh->v_s, strlen(ssh->v_s));
- hash_string(ssh->kex->hash, ssh->exhash,
- s->our_kexinit, s->our_kexinitlen);
- sfree(s->our_kexinit);
- if (pktin->length > 5)
- hash_string(ssh->kex->hash, ssh->exhash,
- pktin->data + 5, pktin->length - 5);
-
if (s->ignorepkt) /* first_kex_packet_follows */
- crWaitUntil(pktin); /* Ignore packet */
+ crWaitUntilV(pktin); /* Ignore packet */
}
- /*
- * Work out the number of bits of key we will need from the key
- * exchange. We start with the maximum key length of either
- * cipher...
- */
- {
- int csbits, scbits;
+ if (ssh->kex->main_type == KEXTYPE_DH) {
+ /*
+ * Work out the number of bits of key we will need from the
+ * key exchange. We start with the maximum key length of
+ * either cipher...
+ */
+ {
+ int csbits, scbits;
- csbits = s->cscipher_tobe->keylen;
- scbits = s->sccipher_tobe->keylen;
- s->nbits = (csbits > scbits ? csbits : scbits);
- }
- /* The keys only have hlen-bit entropy, since they're based on
- * a hash. So cap the key size at hlen bits. */
- if (s->nbits > ssh->kex->hash->hlen * 8)
- s->nbits = ssh->kex->hash->hlen * 8;
+ csbits = s->cscipher_tobe->keylen;
+ scbits = s->sccipher_tobe->keylen;
+ s->nbits = (csbits > scbits ? csbits : scbits);
+ }
+ /* The keys only have hlen-bit entropy, since they're based on
+ * a hash. So cap the key size at hlen bits. */
+ if (s->nbits > ssh->kex->hash->hlen * 8)
+ s->nbits = ssh->kex->hash->hlen * 8;
- /*
- * If we're doing Diffie-Hellman group exchange, start by
- * requesting a group.
- */
- if (!ssh->kex->pdata) {
- logevent("Doing Diffie-Hellman group exchange");
- ssh->pkt_ctx |= SSH2_PKTCTX_DHGEX;
- /*
- * Work out how big a DH group we will need to allow that
- * much data.
- */
- s->pbits = 512 << ((s->nbits - 1) / 64);
- s->pktout = ssh2_pkt_init(SSH2_MSG_KEX_DH_GEX_REQUEST);
- ssh2_pkt_adduint32(s->pktout, s->pbits);
- ssh2_pkt_send_noqueue(ssh, s->pktout);
+ /*
+ * If we're doing Diffie-Hellman group exchange, start by
+ * requesting a group.
+ */
+ if (!ssh->kex->pdata) {
+ logevent("Doing Diffie-Hellman group exchange");
+ ssh->pkt_kctx = SSH2_PKTCTX_DHGEX;
+ /*
+ * Work out how big a DH group we will need to allow that
+ * much data.
+ */
+ s->pbits = 512 << ((s->nbits - 1) / 64);
+ s->pktout = ssh2_pkt_init(SSH2_MSG_KEX_DH_GEX_REQUEST);
+ ssh2_pkt_adduint32(s->pktout, s->pbits);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_KEX_DH_GEX_GROUP) {
+ bombout(("expected key exchange group packet from server"));
+ crStopV;
+ }
+ s->p = ssh2_pkt_getmp(pktin);
+ s->g = ssh2_pkt_getmp(pktin);
+ if (!s->p || !s->g) {
+ bombout(("unable to read mp-ints from incoming group packet"));
+ crStopV;
+ }
+ ssh->kex_ctx = dh_setup_gex(s->p, s->g);
+ s->kex_init_value = SSH2_MSG_KEX_DH_GEX_INIT;
+ s->kex_reply_value = SSH2_MSG_KEX_DH_GEX_REPLY;
+ } else {
+ ssh->pkt_kctx = SSH2_PKTCTX_DHGROUP;
+ ssh->kex_ctx = dh_setup_group(ssh->kex);
+ s->kex_init_value = SSH2_MSG_KEXDH_INIT;
+ s->kex_reply_value = SSH2_MSG_KEXDH_REPLY;
+ logeventf(ssh, "Using Diffie-Hellman with standard group \"%s\"",
+ ssh->kex->groupname);
+ }
- crWaitUntil(pktin);
- if (pktin->type != SSH2_MSG_KEX_DH_GEX_GROUP) {
- bombout(("expected key exchange group packet from server"));
- crStop(0);
- }
- s->p = ssh2_pkt_getmp(pktin);
- s->g = ssh2_pkt_getmp(pktin);
- if (!s->p || !s->g) {
- bombout(("unable to read mp-ints from incoming group packet"));
- crStop(0);
- }
- ssh->kex_ctx = dh_setup_gex(s->p, s->g);
- s->kex_init_value = SSH2_MSG_KEX_DH_GEX_INIT;
- s->kex_reply_value = SSH2_MSG_KEX_DH_GEX_REPLY;
+ logeventf(ssh, "Doing Diffie-Hellman key exchange with hash %s",
+ ssh->kex->hash->text_name);
+ /*
+ * Now generate and send e for Diffie-Hellman.
+ */
+ set_busy_status(ssh->frontend, BUSY_CPU); /* this can take a while */
+ s->e = dh_create_e(ssh->kex_ctx, s->nbits * 2);
+ s->pktout = ssh2_pkt_init(s->kex_init_value);
+ ssh2_pkt_addmp(s->pktout, s->e);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ set_busy_status(ssh->frontend, BUSY_WAITING); /* wait for server */
+ crWaitUntilV(pktin);
+ if (pktin->type != s->kex_reply_value) {
+ bombout(("expected key exchange reply packet from server"));
+ crStopV;
+ }
+ set_busy_status(ssh->frontend, BUSY_CPU); /* cogitate */
+ ssh_pkt_getstring(pktin, &s->hostkeydata, &s->hostkeylen);
+ s->hkey = ssh->hostkey->newkey(s->hostkeydata, s->hostkeylen);
+ s->f = ssh2_pkt_getmp(pktin);
+ if (!s->f) {
+ bombout(("unable to parse key exchange reply packet"));
+ crStopV;
+ }
+ ssh_pkt_getstring(pktin, &s->sigdata, &s->siglen);
+
+ s->K = dh_find_K(ssh->kex_ctx, s->f);
+
+ /* We assume everything from now on will be quick, and it might
+ * involve user interaction. */
+ set_busy_status(ssh->frontend, BUSY_NOT);
+
+ hash_string(ssh->kex->hash, ssh->exhash, s->hostkeydata, s->hostkeylen);
+ if (!ssh->kex->pdata) {
+ hash_uint32(ssh->kex->hash, ssh->exhash, s->pbits);
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->p);
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->g);
+ }
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->e);
+ hash_mpint(ssh->kex->hash, ssh->exhash, s->f);
+
+ dh_cleanup(ssh->kex_ctx);
+ freebn(s->f);
+ if (!ssh->kex->pdata) {
+ freebn(s->g);
+ freebn(s->p);
+ }
} else {
- ssh->pkt_ctx |= SSH2_PKTCTX_DHGROUP;
- ssh->kex_ctx = dh_setup_group(ssh->kex);
- s->kex_init_value = SSH2_MSG_KEXDH_INIT;
- s->kex_reply_value = SSH2_MSG_KEXDH_REPLY;
- logeventf(ssh, "Using Diffie-Hellman with standard group \"%s\"",
- ssh->kex->groupname);
- }
+ logeventf(ssh, "Doing RSA key exchange with hash %s",
+ ssh->kex->hash->text_name);
+ ssh->pkt_kctx = SSH2_PKTCTX_RSAKEX;
+ /*
+ * RSA key exchange. First expect a KEXRSA_PUBKEY packet
+ * from the server.
+ */
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_KEXRSA_PUBKEY) {
+ bombout(("expected RSA public key packet from server"));
+ crStopV;
+ }
- logevent("Doing Diffie-Hellman key exchange");
- /*
- * Now generate and send e for Diffie-Hellman.
- */
- set_busy_status(ssh->frontend, BUSY_CPU); /* this can take a while */
- s->e = dh_create_e(ssh->kex_ctx, s->nbits * 2);
- s->pktout = ssh2_pkt_init(s->kex_init_value);
- ssh2_pkt_addmp(s->pktout, s->e);
- ssh2_pkt_send_noqueue(ssh, s->pktout);
+ ssh_pkt_getstring(pktin, &s->hostkeydata, &s->hostkeylen);
+ hash_string(ssh->kex->hash, ssh->exhash,
+ s->hostkeydata, s->hostkeylen);
+ s->hkey = ssh->hostkey->newkey(s->hostkeydata, s->hostkeylen);
- set_busy_status(ssh->frontend, BUSY_WAITING); /* wait for server */
- crWaitUntil(pktin);
- if (pktin->type != s->kex_reply_value) {
- bombout(("expected key exchange reply packet from server"));
- crStop(0);
- }
- set_busy_status(ssh->frontend, BUSY_CPU); /* cogitate */
- ssh_pkt_getstring(pktin, &s->hostkeydata, &s->hostkeylen);
- s->f = ssh2_pkt_getmp(pktin);
- if (!s->f) {
- bombout(("unable to parse key exchange reply packet"));
- crStop(0);
- }
- ssh_pkt_getstring(pktin, &s->sigdata, &s->siglen);
+ {
+ char *keydata;
+ ssh_pkt_getstring(pktin, &keydata, &s->rsakeylen);
+ s->rsakeydata = snewn(s->rsakeylen, char);
+ memcpy(s->rsakeydata, keydata, s->rsakeylen);
+ }
+
+ s->rsakey = ssh_rsakex_newkey(s->rsakeydata, s->rsakeylen);
+ if (!s->rsakey) {
+ sfree(s->rsakeydata);
+ bombout(("unable to parse RSA public key from server"));
+ crStopV;
+ }
+
+ hash_string(ssh->kex->hash, ssh->exhash, s->rsakeydata, s->rsakeylen);
+
+ /*
+ * Next, set up a shared secret K, of precisely KLEN -
+ * 2*HLEN - 49 bits, where KLEN is the bit length of the
+ * RSA key modulus and HLEN is the bit length of the hash
+ * we're using.
+ */
+ {
+ int klen = ssh_rsakex_klen(s->rsakey);
+ int nbits = klen - (2*ssh->kex->hash->hlen*8 + 49);
+ int i, byte = 0;
+ unsigned char *kstr1, *kstr2, *outstr;
+ int kstr1len, kstr2len, outstrlen;
+
+ s->K = bn_power_2(nbits - 1);
+
+ for (i = 0; i < nbits; i++) {
+ if ((i & 7) == 0) {
+ byte = random_byte();
+ }
+ bignum_set_bit(s->K, i, (byte >> (i & 7)) & 1);
+ }
+
+ /*
+ * Encode this as an mpint.
+ */
+ kstr1 = ssh2_mpint_fmt(s->K, &kstr1len);
+ kstr2 = snewn(kstr2len = 4 + kstr1len, unsigned char);
+ PUT_32BIT(kstr2, kstr1len);
+ memcpy(kstr2 + 4, kstr1, kstr1len);
+
+ /*
+ * Encrypt it with the given RSA key.
+ */
+ outstrlen = (klen + 7) / 8;
+ outstr = snewn(outstrlen, unsigned char);
+ ssh_rsakex_encrypt(ssh->kex->hash, kstr2, kstr2len,
+ outstr, outstrlen, s->rsakey);
+
+ /*
+ * And send it off in a return packet.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_KEXRSA_SECRET);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, (char *)outstr, outstrlen);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ hash_string(ssh->kex->hash, ssh->exhash, outstr, outstrlen);
+
+ sfree(kstr2);
+ sfree(kstr1);
+ sfree(outstr);
+ }
+
+ ssh_rsakex_freekey(s->rsakey);
- s->K = dh_find_K(ssh->kex_ctx, s->f);
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_KEXRSA_DONE) {
+ sfree(s->rsakeydata);
+ bombout(("expected signature packet from server"));
+ crStopV;
+ }
- /* We assume everything from now on will be quick, and it might
- * involve user interaction. */
- set_busy_status(ssh->frontend, BUSY_NOT);
+ ssh_pkt_getstring(pktin, &s->sigdata, &s->siglen);
- hash_string(ssh->kex->hash, ssh->exhash, s->hostkeydata, s->hostkeylen);
- if (!ssh->kex->pdata) {
- hash_uint32(ssh->kex->hash, ssh->exhash, s->pbits);
- hash_mpint(ssh->kex->hash, ssh->exhash, s->p);
- hash_mpint(ssh->kex->hash, ssh->exhash, s->g);
+ sfree(s->rsakeydata);
}
- hash_mpint(ssh->kex->hash, ssh->exhash, s->e);
- hash_mpint(ssh->kex->hash, ssh->exhash, s->f);
+
hash_mpint(ssh->kex->hash, ssh->exhash, s->K);
assert(ssh->kex->hash->hlen <= sizeof(s->exchange_hash));
ssh->kex->hash->final(ssh->exhash, s->exchange_hash);
- dh_cleanup(ssh->kex_ctx);
ssh->kex_ctx = NULL;
#if 0
dmemdump(s->exchange_hash, ssh->kex->hash->hlen);
#endif
- s->hkey = ssh->hostkey->newkey(s->hostkeydata, s->hostkeylen);
if (!s->hkey ||
!ssh->hostkey->verifysig(s->hkey, s->sigdata, s->siglen,
(char *)s->exchange_hash,
ssh->kex->hash->hlen)) {
bombout(("Server's host key did not match the signature supplied"));
- crStop(0);
+ crStopV;
}
/*
ssh_dialog_callback, ssh);
if (s->dlgret < 0) {
do {
- crReturn(0);
+ crReturnV;
if (pktin) {
bombout(("Unexpected data from server while waiting"
" for user host key response"));
- crStop(0);
+ crStopV;
}
} while (pktin || inlen > 0);
s->dlgret = ssh->user_response;
if (s->dlgret == 0) {
ssh_disconnect(ssh, "User aborted at host key verification", NULL,
0, TRUE);
- crStop(0);
+ crStopV;
}
if (!s->got_session_id) { /* don't bother logging this in rekeys */
logevent("Host key fingerprint is:");
* hash from the _first_ key exchange.
*/
{
- unsigned char keyspace[40];
+ unsigned char keyspace[SSH2_KEX_MAX_HASH_LEN * SSH2_MKKEY_ITERS];
+ assert(sizeof(keyspace) >= ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'C',keyspace);
+ assert((ssh->cscipher->keylen+7) / 8 <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->cscipher->setkey(ssh->cs_cipher_ctx, keyspace);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'A',keyspace);
+ assert(ssh->cscipher->blksize <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->cscipher->setiv(ssh->cs_cipher_ctx, keyspace);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'E',keyspace);
+ assert(ssh->csmac->len <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->csmac->setkey(ssh->cs_mac_ctx, keyspace);
+ smemclr(keyspace, sizeof(keyspace));
}
logeventf(ssh, "Initialised %.200s client->server encryption",
/*
* Expect SSH2_MSG_NEWKEYS from server.
*/
- crWaitUntil(pktin);
+ crWaitUntilV(pktin);
if (pktin->type != SSH2_MSG_NEWKEYS) {
bombout(("expected new-keys packet from server"));
- crStop(0);
+ crStopV;
}
ssh->incoming_data_size = 0; /* start counting from here */
* hash from the _first_ key exchange.
*/
{
- unsigned char keyspace[40];
+ unsigned char keyspace[SSH2_KEX_MAX_HASH_LEN * SSH2_MKKEY_ITERS];
+ assert(sizeof(keyspace) >= ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'D',keyspace);
+ assert((ssh->sccipher->keylen+7) / 8 <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->sccipher->setkey(ssh->sc_cipher_ctx, keyspace);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'B',keyspace);
+ assert(ssh->sccipher->blksize <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->sccipher->setiv(ssh->sc_cipher_ctx, keyspace);
ssh2_mkkey(ssh,s->K,s->exchange_hash,'F',keyspace);
+ assert(ssh->scmac->len <=
+ ssh->kex->hash->hlen * SSH2_MKKEY_ITERS);
ssh->scmac->setkey(ssh->sc_mac_ctx, keyspace);
+ smemclr(keyspace, sizeof(keyspace));
}
logeventf(ssh, "Initialised %.200s server->client encryption",
ssh->sccipher->text_name);
ssh->sccomp->text_name);
/*
- * Free key exchange data.
+ * Free shared secret.
*/
- freebn(s->f);
freebn(s->K);
- if (!ssh->kex->pdata) {
- freebn(s->g);
- freebn(s->p);
- }
/*
* Key exchange is over. Loop straight back round if we have a
*/
ssh->kex_in_progress = FALSE;
ssh->last_rekey = GETTICKCOUNT();
- if (ssh->cfg.ssh_rekey_time != 0)
- ssh->next_rekey = schedule_timer(ssh->cfg.ssh_rekey_time*60*TICKSPERSEC,
+ if (conf_get_int(ssh->conf, CONF_ssh_rekey_time) != 0)
+ ssh->next_rekey = schedule_timer(conf_get_int(ssh->conf, CONF_ssh_rekey_time)*60*TICKSPERSEC,
ssh2_timer, ssh);
- /*
- * If this is the first key exchange phase, we must pass the
- * SSH2_MSG_NEWKEYS packet to the next layer, not because it
- * wants to see it but because it will need time to initialise
- * itself before it sees an actual packet. In subsequent key
- * exchange phases, we don't pass SSH2_MSG_NEWKEYS on, because
- * it would only confuse the layer above.
- */
- if (s->activated_authconn) {
- crReturn(0);
- }
- s->activated_authconn = TRUE;
-
/*
* Now we're encrypting. Begin returning 1 to the protocol main
* function so that other things can run on top of the
* start.
*
* We _also_ go back to the start if we see pktin==NULL and
- * inlen==-1, because this is a special signal meaning
+ * inlen negative, because this is a special signal meaning
* `initiate client-driven rekey', and `in' contains a message
* giving the reason for the rekey.
+ *
+ * inlen==-1 means always initiate a rekey;
+ * inlen==-2 means that userauth has completed successfully and
+ * we should consider rekeying (for delayed compression).
*/
while (!((pktin && pktin->type == SSH2_MSG_KEXINIT) ||
- (!pktin && inlen == -1))) {
+ (!pktin && inlen < 0))) {
wait_for_rekey:
- crReturn(1);
+ if (!ssh->protocol_initial_phase_done) {
+ ssh->protocol_initial_phase_done = TRUE;
+ /*
+ * Allow authconn to initialise itself.
+ */
+ do_ssh2_authconn(ssh, NULL, 0, NULL);
+ }
+ crReturnV;
}
if (pktin) {
logevent("Server initiated key re-exchange");
} else {
+ if (inlen == -2) {
+ /*
+ * authconn has seen a USERAUTH_SUCCEEDED. Time to enable
+ * delayed compression, if it's available.
+ *
+ * draft-miller-secsh-compression-delayed-00 says that you
+ * negotiate delayed compression in the first key exchange, and
+ * both sides start compressing when the server has sent
+ * USERAUTH_SUCCESS. This has a race condition -- the server
+ * can't know when the client has seen it, and thus which incoming
+ * packets it should treat as compressed.
+ *
+ * Instead, we do the initial key exchange without offering the
+ * delayed methods, but note if the server offers them; when we
+ * get here, if a delayed method was available that was higher
+ * on our list than what we got, we initiate a rekey in which we
+ * _do_ list the delayed methods (and hopefully get it as a
+ * result). Subsequent rekeys will do the same.
+ */
+ assert(!s->userauth_succeeded); /* should only happen once */
+ s->userauth_succeeded = TRUE;
+ if (!s->pending_compression)
+ /* Can't see any point rekeying. */
+ goto wait_for_rekey; /* this is utterly horrid */
+ /* else fall through to rekey... */
+ s->pending_compression = FALSE;
+ }
/*
+ * Now we've decided to rekey.
+ *
* Special case: if the server bug is set that doesn't
* allow rekeying, we give a different log message and
* continue waiting. (If such a server _initiates_ a rekey,
* hit the event log _too_ often. */
ssh->outgoing_data_size = 0;
ssh->incoming_data_size = 0;
- if (ssh->cfg.ssh_rekey_time != 0) {
+ if (conf_get_int(ssh->conf, CONF_ssh_rekey_time) != 0) {
ssh->next_rekey =
- schedule_timer(ssh->cfg.ssh_rekey_time*60*TICKSPERSEC,
+ schedule_timer(conf_get_int(ssh->conf, CONF_ssh_rekey_time)*60*TICKSPERSEC,
ssh2_timer, ssh);
}
- goto wait_for_rekey; /* this is utterly horrid */
+ goto wait_for_rekey; /* this is still utterly horrid */
} else {
logeventf(ssh, "Initiating key re-exchange (%s)", (char *)in);
}
}
goto begin_key_exchange;
- crFinish(1);
+ crFinishV;
}
/*
{
Ssh ssh = c->ssh;
struct Packet *pktout;
+ int ret;
while (c->v.v2.remwindow > 0 && bufchain_size(&c->v.v2.outbuffer) > 0) {
int len;
len = c->v.v2.remmaxpkt;
pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_DATA);
ssh2_pkt_adduint32(pktout, c->remoteid);
- dont_log_data(ssh, pktout, PKTLOG_OMIT);
ssh2_pkt_addstring_start(pktout);
+ dont_log_data(ssh, pktout, PKTLOG_OMIT);
ssh2_pkt_addstring_data(pktout, data, len);
end_log_omission(ssh, pktout);
ssh2_pkt_send(ssh, pktout);
* After having sent as much data as we can, return the amount
* still buffered.
*/
- return bufchain_size(&c->v.v2.outbuffer);
+ ret = bufchain_size(&c->v.v2.outbuffer);
+
+ /*
+ * And if there's no data pending but we need to send an EOF, send
+ * it.
+ */
+ if (!ret && c->pending_eof)
+ ssh_channel_try_eof(c);
+
+ return ret;
}
-static void ssh2_try_send_and_unthrottle(struct ssh_channel *c)
+static void ssh2_try_send_and_unthrottle(Ssh ssh, struct ssh_channel *c)
{
int bufsize;
- if (c->closes)
- return; /* don't send on closing channels */
+ if (c->closes & CLOSES_SENT_EOF)
+ return; /* don't send on channels we've EOFed */
bufsize = ssh2_try_send(c);
if (bufsize == 0) {
switch (c->type) {
}
}
+/*
+ * Set up most of a new ssh_channel for SSH-2.
+ */
+static void ssh2_channel_init(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+ c->localid = alloc_channel_id(ssh);
+ c->closes = 0;
+ c->pending_eof = FALSE;
+ c->throttling_conn = FALSE;
+ c->v.v2.locwindow = c->v.v2.locmaxwin = c->v.v2.remlocwin =
+ conf_get_int(ssh->conf, CONF_ssh_simple) ? OUR_V2_BIGWIN : OUR_V2_WINSIZE;
+ c->v.v2.chanreq_head = NULL;
+ c->v.v2.throttle_state = UNTHROTTLED;
+ bufchain_init(&c->v.v2.outbuffer);
+}
+
+/*
+ * Construct the common parts of a CHANNEL_OPEN.
+ */
+static struct Packet *ssh2_chanopen_init(struct ssh_channel *c, char *type)
+{
+ struct Packet *pktout;
+
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN);
+ ssh2_pkt_addstring(pktout, type);
+ ssh2_pkt_adduint32(pktout, c->localid);
+ ssh2_pkt_adduint32(pktout, c->v.v2.locwindow);/* our window size */
+ ssh2_pkt_adduint32(pktout, OUR_V2_MAXPKT); /* our max pkt size */
+ return pktout;
+}
+
+/*
+ * CHANNEL_FAILURE doesn't come with any indication of what message
+ * caused it, so we have to keep track of the outstanding
+ * CHANNEL_REQUESTs ourselves.
+ */
+static void ssh2_queue_chanreq_handler(struct ssh_channel *c,
+ cchandler_fn_t handler, void *ctx)
+{
+ struct outstanding_channel_request *ocr =
+ snew(struct outstanding_channel_request);
+
+ assert(!(c->closes & (CLOSES_SENT_CLOSE | CLOSES_RCVD_CLOSE)));
+ ocr->handler = handler;
+ ocr->ctx = ctx;
+ ocr->next = NULL;
+ if (!c->v.v2.chanreq_head)
+ c->v.v2.chanreq_head = ocr;
+ else
+ c->v.v2.chanreq_tail->next = ocr;
+ c->v.v2.chanreq_tail = ocr;
+}
+
+/*
+ * Construct the common parts of a CHANNEL_REQUEST. If handler is not
+ * NULL then a reply will be requested and the handler will be called
+ * when it arrives. The returned packet is ready to have any
+ * request-specific data added and be sent. Note that if a handler is
+ * provided, it's essential that the request actually be sent.
+ *
+ * The handler will usually be passed the response packet in pktin.
+ * If pktin is NULL, this means that no reply will ever be forthcoming
+ * (e.g. because the entire connection is being destroyed) and the
+ * handler should free any storage it's holding.
+ */
+static struct Packet *ssh2_chanreq_init(struct ssh_channel *c, char *type,
+ cchandler_fn_t handler, void *ctx)
+{
+ struct Packet *pktout;
+
+ assert(!(c->closes & (CLOSES_SENT_CLOSE | CLOSES_RCVD_CLOSE)));
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_addstring(pktout, type);
+ ssh2_pkt_addbool(pktout, handler != NULL);
+ if (handler != NULL)
+ ssh2_queue_chanreq_handler(c, handler, ctx);
+ return pktout;
+}
+
/*
* Potentially enlarge the window on an SSH-2 channel.
*/
-static void ssh2_set_window(struct ssh_channel *c, unsigned newwin)
+static void ssh2_handle_winadj_response(struct ssh_channel *, struct Packet *,
+ void *);
+static void ssh2_set_window(struct ssh_channel *c, int newwin)
{
Ssh ssh = c->ssh;
/*
- * Never send WINDOW_ADJUST for a channel that the remote side
- * already thinks it's closed; there's no point, since it won't
- * be sending any more data anyway.
+ * Never send WINDOW_ADJUST for a channel that the remote side has
+ * already sent EOF on; there's no point, since it won't be
+ * sending any more data anyway. Ditto if _we've_ already sent
+ * CLOSE.
*/
- if (c->closes != 0)
+ if (c->closes & (CLOSES_RCVD_EOF | CLOSES_SENT_CLOSE))
return;
+ /*
+ * If the remote end has a habit of ignoring maxpkt, limit the
+ * window so that it has no choice (assuming it doesn't ignore the
+ * window as well).
+ */
+ if ((ssh->remote_bugs & BUG_SSH2_MAXPKT) && newwin > OUR_V2_MAXPKT)
+ newwin = OUR_V2_MAXPKT;
+
/*
* Only send a WINDOW_ADJUST if there's significantly more window
* available than the other end thinks there is. This saves us
*
* "Significant" is arbitrarily defined as half the window size.
*/
- if (newwin > c->v.v2.locwindow * 2) {
+ if (newwin / 2 >= c->v.v2.locwindow) {
struct Packet *pktout;
+ unsigned *up;
+
+ /*
+ * In order to keep track of how much window the client
+ * actually has available, we'd like it to acknowledge each
+ * WINDOW_ADJUST. We can't do that directly, so we accompany
+ * it with a CHANNEL_REQUEST that has to be acknowledged.
+ *
+ * This is only necessary if we're opening the window wide.
+ * If we're not, then throughput is being constrained by
+ * something other than the maximum window size anyway.
+ */
+ if (newwin == c->v.v2.locmaxwin &&
+ !(ssh->remote_bugs & BUG_CHOKES_ON_WINADJ)) {
+ up = snew(unsigned);
+ *up = newwin - c->v.v2.locwindow;
+ pktout = ssh2_chanreq_init(c, "winadj@putty.projects.tartarus.org",
+ ssh2_handle_winadj_response, up);
+ ssh2_pkt_send(ssh, pktout);
+ if (c->v.v2.throttle_state != UNTHROTTLED)
+ c->v.v2.throttle_state = UNTHROTTLING;
+ } else {
+ /* Pretend the WINDOW_ADJUST was acked immediately. */
+ c->v.v2.remlocwin = newwin;
+ c->v.v2.throttle_state = THROTTLED;
+ }
pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_WINDOW_ADJUST);
ssh2_pkt_adduint32(pktout, c->remoteid);
ssh2_pkt_adduint32(pktout, newwin - c->v.v2.locwindow);
}
}
+/*
+ * Find the channel associated with a message. If there's no channel,
+ * or it's not properly open, make a noise about it and return NULL.
+ */
+static struct ssh_channel *ssh2_channel_msg(Ssh ssh, struct Packet *pktin)
+{
+ unsigned localid = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+
+ c = find234(ssh->channels, &localid, ssh_channelfind);
+ if (!c ||
+ (c->halfopen && pktin->type != SSH2_MSG_CHANNEL_OPEN_CONFIRMATION &&
+ pktin->type != SSH2_MSG_CHANNEL_OPEN_FAILURE)) {
+ char *buf = dupprintf("Received %s for %s channel %u",
+ ssh2_pkt_type(ssh->pkt_kctx, ssh->pkt_actx,
+ pktin->type),
+ c ? "half-open" : "nonexistent", localid);
+ ssh_disconnect(ssh, NULL, buf, SSH2_DISCONNECT_PROTOCOL_ERROR, FALSE);
+ sfree(buf);
+ return NULL;
+ }
+ return c;
+}
+
+static void ssh2_handle_winadj_response(struct ssh_channel *c,
+ struct Packet *pktin, void *ctx)
+{
+ unsigned *sizep = ctx;
+
+ /*
+ * Winadj responses should always be failures. However, at least
+ * one server ("boks_sshd") is known to return SUCCESS for channel
+ * requests it's never heard of, such as "winadj@putty". Raised
+ * with foxt.com as bug 090916-090424, but for the sake of a quiet
+ * life, we don't worry about what kind of response we got.
+ */
+
+ c->v.v2.remlocwin += *sizep;
+ sfree(sizep);
+ /*
+ * winadj messages are only sent when the window is fully open, so
+ * if we get an ack of one, we know any pending unthrottle is
+ * complete.
+ */
+ if (c->v.v2.throttle_state == UNTHROTTLING)
+ c->v.v2.throttle_state = UNTHROTTLED;
+}
+
+static void ssh2_msg_channel_response(Ssh ssh, struct Packet *pktin)
+{
+ struct ssh_channel *c = ssh2_channel_msg(ssh, pktin);
+ struct outstanding_channel_request *ocr;
+
+ if (!c) return;
+ ocr = c->v.v2.chanreq_head;
+ if (!ocr) {
+ ssh2_msg_unexpected(ssh, pktin);
+ return;
+ }
+ ocr->handler(c, pktin, ocr->ctx);
+ c->v.v2.chanreq_head = ocr->next;
+ sfree(ocr);
+ /*
+ * We may now initiate channel-closing procedures, if that
+ * CHANNEL_REQUEST was the last thing outstanding before we send
+ * CHANNEL_CLOSE.
+ */
+ ssh2_channel_check_close(c);
+}
+
static void ssh2_msg_channel_window_adjust(Ssh ssh, struct Packet *pktin)
{
- unsigned i = ssh_pkt_getuint32(pktin);
struct ssh_channel *c;
- c = find234(ssh->channels, &i, ssh_channelfind);
- if (c && !c->closes) {
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+ if (!(c->closes & CLOSES_SENT_EOF)) {
c->v.v2.remwindow += ssh_pkt_getuint32(pktin);
- ssh2_try_send_and_unthrottle(c);
+ ssh2_try_send_and_unthrottle(ssh, c);
}
}
{
char *data;
int length;
- unsigned i = ssh_pkt_getuint32(pktin);
struct ssh_channel *c;
- c = find234(ssh->channels, &i, ssh_channelfind);
+ c = ssh2_channel_msg(ssh, pktin);
if (!c)
- return; /* nonexistent channel */
+ return;
if (pktin->type == SSH2_MSG_CHANNEL_EXTENDED_DATA &&
ssh_pkt_getuint32(pktin) != SSH2_EXTENDED_DATA_STDERR)
return; /* extended but not stderr */
if (data) {
int bufsize = 0;
c->v.v2.locwindow -= length;
+ c->v.v2.remlocwin -= length;
switch (c->type) {
case CHAN_MAINSESSION:
bufsize =
case CHAN_AGENT:
while (length > 0) {
if (c->u.a.lensofar < 4) {
- unsigned int l = min(4 - c->u.a.lensofar, length);
+ unsigned int l = min(4 - c->u.a.lensofar,
+ (unsigned)length);
memcpy(c->u.a.msglen + c->u.a.lensofar,
data, l);
data += l;
if (c->u.a.lensofar >= 4 && length > 0) {
unsigned int l =
min(c->u.a.totallen - c->u.a.lensofar,
- length);
+ (unsigned)length);
memcpy(c->u.a.message + c->u.a.lensofar,
data, l);
data += l;
if (c->u.a.lensofar == c->u.a.totallen) {
void *reply;
int replylen;
+ c->u.a.outstanding_requests++;
if (agent_query(c->u.a.message,
c->u.a.totallen,
&reply, &replylen,
ssh_agentf_callback, c))
ssh_agentf_callback(c, reply, replylen);
sfree(c->u.a.message);
+ c->u.a.message = NULL;
c->u.a.lensofar = 0;
}
}
bufsize = 0;
break;
}
+ /*
+ * If it looks like the remote end hit the end of its window,
+ * and we didn't want it to do that, think about using a
+ * larger window.
+ */
+ if (c->v.v2.remlocwin <= 0 && c->v.v2.throttle_state == UNTHROTTLED &&
+ c->v.v2.locmaxwin < 0x40000000)
+ c->v.v2.locmaxwin += OUR_V2_WINSIZE;
/*
* If we are not buffering too much data,
* enlarge the window again at the remote side.
+ * If we are buffering too much, we may still
+ * need to adjust the window if the server's
+ * sent excess data.
*/
- if (bufsize < OUR_V2_WINSIZE)
- ssh2_set_window(c, OUR_V2_WINSIZE - bufsize);
- }
-}
-
-static void ssh2_msg_channel_eof(Ssh ssh, struct Packet *pktin)
-{
- unsigned i = ssh_pkt_getuint32(pktin);
- struct ssh_channel *c;
-
- c = find234(ssh->channels, &i, ssh_channelfind);
- if (!c)
- return; /* nonexistent channel */
-
- if (c->type == CHAN_X11) {
+ ssh2_set_window(c, bufsize < c->v.v2.locmaxwin ?
+ c->v.v2.locmaxwin - bufsize : 0);
/*
- * Remote EOF on an X11 channel means we should
- * wrap up and close the channel ourselves.
+ * If we're either buffering way too much data, or if we're
+ * buffering anything at all and we're in "simple" mode,
+ * throttle the whole channel.
*/
- x11_close(c->u.x11.s);
- sshfwd_close(c);
- } else if (c->type == CHAN_AGENT) {
- sshfwd_close(c);
- } else if (c->type == CHAN_SOCKDATA) {
- pfd_close(c->u.pfd.s);
- sshfwd_close(c);
+ if ((bufsize > c->v.v2.locmaxwin ||
+ (conf_get_int(ssh->conf, CONF_ssh_simple) && bufsize > 0)) &&
+ !c->throttling_conn) {
+ c->throttling_conn = 1;
+ ssh_throttle_conn(ssh, +1);
+ }
}
}
-static void ssh2_msg_channel_close(Ssh ssh, struct Packet *pktin)
+static void ssh_channel_destroy(struct ssh_channel *c)
{
- unsigned i = ssh_pkt_getuint32(pktin);
- struct ssh_channel *c;
- struct Packet *pktout;
+ Ssh ssh = c->ssh;
- c = find234(ssh->channels, &i, ssh_channelfind);
- if (!c || c->halfopen) {
- bombout(("Received CHANNEL_CLOSE for %s channel %d\n",
- c ? "half-open" : "nonexistent", i));
- return;
- }
- /* Do pre-close processing on the channel. */
switch (c->type) {
case CHAN_MAINSESSION:
- ssh->mainchan = NULL;
- update_specials_menu(ssh->frontend);
- break;
+ ssh->mainchan = NULL;
+ update_specials_menu(ssh->frontend);
+ break;
case CHAN_X11:
- if (c->u.x11.s != NULL)
- x11_close(c->u.x11.s);
- sshfwd_close(c);
- break;
+ if (c->u.x11.s != NULL)
+ x11_close(c->u.x11.s);
+ logevent("Forwarded X11 connection terminated");
+ break;
case CHAN_AGENT:
- sshfwd_close(c);
- break;
+ sfree(c->u.a.message);
+ break;
case CHAN_SOCKDATA:
- if (c->u.pfd.s != NULL)
- pfd_close(c->u.pfd.s);
- sshfwd_close(c);
- break;
- }
- if (c->closes == 0) {
- pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
- ssh2_pkt_adduint32(pktout, c->remoteid);
- ssh2_pkt_send(ssh, pktout);
+ if (c->u.pfd.s != NULL)
+ pfd_close(c->u.pfd.s);
+ logevent("Forwarded port closed");
+ break;
}
+
del234(ssh->channels, c);
- bufchain_clear(&c->v.v2.outbuffer);
+ if (ssh->version == 2) {
+ bufchain_clear(&c->v.v2.outbuffer);
+ assert(c->v.v2.chanreq_head == NULL);
+ }
sfree(c);
/*
* (This is only our termination condition if we're
* not running in -N mode.)
*/
- if (!ssh->cfg.ssh_no_shell && count234(ssh->channels) == 0) {
- /*
- * We used to send SSH_MSG_DISCONNECT here,
- * because I'd believed that _every_ conforming
- * SSH-2 connection had to end with a disconnect
- * being sent by at least one side; apparently
- * I was wrong and it's perfectly OK to
- * unceremoniously slam the connection shut
- * when you're done, and indeed OpenSSH feels
- * this is more polite than sending a
- * DISCONNECT. So now we don't.
- */
- ssh_disconnect(ssh, "All channels closed", NULL, 0, TRUE);
+ if (ssh->version == 2 &&
+ !conf_get_int(ssh->conf, CONF_ssh_no_shell) &&
+ count234(ssh->channels) == 0) {
+ /*
+ * We used to send SSH_MSG_DISCONNECT here,
+ * because I'd believed that _every_ conforming
+ * SSH-2 connection had to end with a disconnect
+ * being sent by at least one side; apparently
+ * I was wrong and it's perfectly OK to
+ * unceremoniously slam the connection shut
+ * when you're done, and indeed OpenSSH feels
+ * this is more polite than sending a
+ * DISCONNECT. So now we don't.
+ */
+ ssh_disconnect(ssh, "All channels closed", NULL, 0, TRUE);
+ }
+}
+
+static void ssh2_channel_check_close(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+
+ if ((!((CLOSES_SENT_EOF | CLOSES_RCVD_EOF) & ~c->closes) ||
+ c->type == CHAN_ZOMBIE) &&
+ !c->v.v2.chanreq_head &&
+ !(c->closes & CLOSES_SENT_CLOSE)) {
+ /*
+ * We have both sent and received EOF (or the channel is a
+ * zombie), and we have no outstanding channel requests, which
+ * means the channel is in final wind-up. But we haven't sent
+ * CLOSE, so let's do so now.
+ */
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_send(ssh, pktout);
+ c->closes |= CLOSES_SENT_EOF | CLOSES_SENT_CLOSE;
+ }
+
+ if (!((CLOSES_SENT_CLOSE | CLOSES_RCVD_CLOSE) & ~c->closes)) {
+ assert(c->v.v2.chanreq_head == NULL);
+ /*
+ * We have both sent and received CLOSE, which means we're
+ * completely done with the channel.
+ */
+ ssh_channel_destroy(c);
+ }
+}
+
+static void ssh2_channel_got_eof(struct ssh_channel *c)
+{
+ if (c->closes & CLOSES_RCVD_EOF)
+ return; /* already seen EOF */
+ c->closes |= CLOSES_RCVD_EOF;
+
+ if (c->type == CHAN_X11) {
+ x11_send_eof(c->u.x11.s);
+ } else if (c->type == CHAN_AGENT) {
+ if (c->u.a.outstanding_requests == 0) {
+ /* Manufacture an outgoing EOF in response to the incoming one. */
+ sshfwd_write_eof(c);
+ }
+ } else if (c->type == CHAN_SOCKDATA) {
+ pfd_send_eof(c->u.pfd.s);
+ } else if (c->type == CHAN_MAINSESSION) {
+ Ssh ssh = c->ssh;
+
+ if (!ssh->sent_console_eof &&
+ (from_backend_eof(ssh->frontend) || ssh->got_pty)) {
+ /*
+ * Either from_backend_eof told us that the front end
+ * wants us to close the outgoing side of the connection
+ * as soon as we see EOF from the far end, or else we've
+ * unilaterally decided to do that because we've allocated
+ * a remote pty and hence EOF isn't a particularly
+ * meaningful concept.
+ */
+ sshfwd_write_eof(c);
+ }
+ ssh->sent_console_eof = TRUE;
+ }
+
+ ssh2_channel_check_close(c);
+}
+
+static void ssh2_msg_channel_eof(Ssh ssh, struct Packet *pktin)
+{
+ struct ssh_channel *c;
+
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+ ssh2_channel_got_eof(c);
+}
+
+static void ssh2_msg_channel_close(Ssh ssh, struct Packet *pktin)
+{
+ struct ssh_channel *c;
+
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
+
+ /*
+ * When we receive CLOSE on a channel, we assume it comes with an
+ * implied EOF if we haven't seen EOF yet.
+ */
+ ssh2_channel_got_eof(c);
+
+ /*
+ * And we also send an outgoing EOF, if we haven't already, on the
+ * assumption that CLOSE is a pretty forceful announcement that
+ * the remote side is doing away with the entire channel. (If it
+ * had wanted to send us EOF and continue receiving data from us,
+ * it would have just sent CHANNEL_EOF.)
+ */
+ if (!(c->closes & CLOSES_SENT_EOF)) {
+ /*
+ * Make sure we don't read any more from whatever our local
+ * data source is for this channel.
+ */
+ switch (c->type) {
+ case CHAN_MAINSESSION:
+ ssh->send_ok = 0; /* stop trying to read from stdin */
+ break;
+ case CHAN_X11:
+ x11_override_throttle(c->u.x11.s, 1);
+ break;
+ case CHAN_SOCKDATA:
+ pfd_override_throttle(c->u.pfd.s, 1);
+ break;
+ }
+
+ /*
+ * Abandon any buffered data we still wanted to send to this
+ * channel. Receiving a CHANNEL_CLOSE is an indication that
+ * the server really wants to get on and _destroy_ this
+ * channel, and it isn't going to send us any further
+ * WINDOW_ADJUSTs to permit us to send pending stuff.
+ */
+ bufchain_clear(&c->v.v2.outbuffer);
+
+ /*
+ * Send outgoing EOF.
+ */
+ sshfwd_write_eof(c);
+ }
+
+ /*
+ * Now process the actual close.
+ */
+ if (!(c->closes & CLOSES_RCVD_CLOSE)) {
+ c->closes |= CLOSES_RCVD_CLOSE;
+ ssh2_channel_check_close(c);
}
}
static void ssh2_msg_channel_open_confirmation(Ssh ssh, struct Packet *pktin)
{
- unsigned i = ssh_pkt_getuint32(pktin);
struct ssh_channel *c;
- struct Packet *pktout;
- c = find234(ssh->channels, &i, ssh_channelfind);
+ c = ssh2_channel_msg(ssh, pktin);
if (!c)
- return; /* nonexistent channel */
+ return;
if (c->type != CHAN_SOCKDATA_DORMANT)
return; /* dunno why they're confirming this */
c->remoteid = ssh_pkt_getuint32(pktin);
c->v.v2.remmaxpkt = ssh_pkt_getuint32(pktin);
if (c->u.pfd.s)
pfd_confirm(c->u.pfd.s);
- if (c->closes) {
- /*
- * We have a pending close on this channel,
- * which we decided on before the server acked
- * the channel open. So now we know the
- * remoteid, we can close it again.
- */
- pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
- ssh2_pkt_adduint32(pktout, c->remoteid);
- ssh2_pkt_send(ssh, pktout);
- }
+ if (c->pending_eof)
+ ssh_channel_try_eof(c);
}
static void ssh2_msg_channel_open_failure(Ssh ssh, struct Packet *pktin)
"Unknown channel type",
"Resource shortage",
};
- unsigned i = ssh_pkt_getuint32(pktin);
unsigned reason_code;
char *reason_string;
int reason_length;
struct ssh_channel *c;
- c = find234(ssh->channels, &i, ssh_channelfind);
+ c = ssh2_channel_msg(ssh, pktin);
if (!c)
- return; /* nonexistent channel */
+ return;
if (c->type != CHAN_SOCKDATA_DORMANT)
return; /* dunno why they're failing this */
static void ssh2_msg_channel_request(Ssh ssh, struct Packet *pktin)
{
- unsigned localid;
char *type;
int typelen, want_reply;
int reply = SSH2_MSG_CHANNEL_FAILURE; /* default */
struct ssh_channel *c;
struct Packet *pktout;
- localid = ssh_pkt_getuint32(pktin);
+ c = ssh2_channel_msg(ssh, pktin);
+ if (!c)
+ return;
ssh_pkt_getstring(pktin, &type, &typelen);
want_reply = ssh2_pkt_getbool(pktin);
- /*
- * First, check that the channel exists. Otherwise,
- * we can instantly disconnect with a rude message.
- */
- c = find234(ssh->channels, &localid, ssh_channelfind);
- if (!c) {
- char *buf = dupprintf("Received channel request for nonexistent"
- " channel %d", localid);
- ssh_disconnect(ssh, NULL, buf, SSH2_DISCONNECT_PROTOCOL_ERROR, FALSE);
- sfree(buf);
- return;
- }
-
/*
* Having got the channel number, we now look at
* the request type string to see if it's something
int msglen = 0, core = FALSE;
/* ICK: older versions of OpenSSH (e.g. 3.4p1)
* provide an `int' for the signal, despite its
- * having been a `string' in the drafts since at
+ * having been a `string' in the drafts of RFC 4254 since at
* least 2001. (Fixed in session.c 1.147.) Try to
* infer which we can safely parse it as. */
{
is_int = FALSE;
} else {
int maybe_int = FALSE, maybe_str = FALSE;
-#define CHECK_HYPOTHESIS(offset, result) \
- do { \
- long q = offset; \
- if (q >= 0 && q+4 <= len) { \
- q = q + 4 + GET_32BIT(p+q); \
- if (q >= 0 && q+4 <= len && \
- ((q = q + 4 + GET_32BIT(p+q))!= 0) && q == len) \
- result = TRUE; \
- } \
- } while(0)
+#define CHECK_HYPOTHESIS(offset, result) \
+ do \
+ { \
+ int q = toint(offset); \
+ if (q >= 0 && q+4 <= len) { \
+ q = toint(q + 4 + GET_32BIT(p+q)); \
+ if (q >= 0 && q+4 <= len && \
+ ((q = toint(q + 4 + GET_32BIT(p+q))) != 0) && \
+ q == len) \
+ result = TRUE; \
+ } \
+ } while(0)
CHECK_HYPOTHESIS(4+1, maybe_int);
CHECK_HYPOTHESIS(4+num+1, maybe_str);
#undef CHECK_HYPOTHESIS
is_plausible = FALSE;
}
}
+ ssh->exitcode = 128; /* means `unknown signal' */
if (is_plausible) {
if (is_int) {
/* Old non-standard OpenSSH. */
int signum = ssh_pkt_getuint32(pktin);
fmt_sig = dupprintf(" %d", signum);
+ ssh->exitcode = 128 + signum;
} else {
- /* As per the drafts. */
+ /* As per RFC 4254. */
char *sig;
int siglen;
ssh_pkt_getstring(pktin, &sig, &siglen);
fmt_sig = dupprintf(" \"%.*s\"",
siglen, sig);
}
+
+ /*
+ * Really hideous method of translating the
+ * signal description back into a locally
+ * meaningful number.
+ */
+
+ if (0)
+ ;
+#define TRANSLATE_SIGNAL(s) \
+ else if (siglen == lenof(#s)-1 && !memcmp(sig, #s, siglen)) \
+ ssh->exitcode = 128 + SIG ## s
+#ifdef SIGABRT
+ TRANSLATE_SIGNAL(ABRT);
+#endif
+#ifdef SIGALRM
+ TRANSLATE_SIGNAL(ALRM);
+#endif
+#ifdef SIGFPE
+ TRANSLATE_SIGNAL(FPE);
+#endif
+#ifdef SIGHUP
+ TRANSLATE_SIGNAL(HUP);
+#endif
+#ifdef SIGILL
+ TRANSLATE_SIGNAL(ILL);
+#endif
+#ifdef SIGINT
+ TRANSLATE_SIGNAL(INT);
+#endif
+#ifdef SIGKILL
+ TRANSLATE_SIGNAL(KILL);
+#endif
+#ifdef SIGPIPE
+ TRANSLATE_SIGNAL(PIPE);
+#endif
+#ifdef SIGQUIT
+ TRANSLATE_SIGNAL(QUIT);
+#endif
+#ifdef SIGSEGV
+ TRANSLATE_SIGNAL(SEGV);
+#endif
+#ifdef SIGTERM
+ TRANSLATE_SIGNAL(TERM);
+#endif
+#ifdef SIGUSR1
+ TRANSLATE_SIGNAL(USR1);
+#endif
+#ifdef SIGUSR2
+ TRANSLATE_SIGNAL(USR2);
+#endif
+#undef TRANSLATE_SIGNAL
+ else
+ ssh->exitcode = 128;
}
core = ssh2_pkt_getbool(pktin);
ssh_pkt_getstring(pktin, &msg, &msglen);
if (typelen == 3 && !memcmp(type, "x11", 3)) {
char *addrstr;
+ const char *x11err;
ssh_pkt_getstring(pktin, &peeraddr, &peeraddrlen);
addrstr = snewn(peeraddrlen+1, char);
if (!ssh->X11_fwd_enabled)
error = "X11 forwarding is not enabled";
- else if (x11_init(&c->u.x11.s, ssh->cfg.x11_display, c,
- ssh->x11auth, addrstr, peerport,
- &ssh->cfg) != NULL) {
+ else if ((x11err = x11_init(&c->u.x11.s, ssh->x11disp, c,
+ addrstr, peerport, ssh->conf)) != NULL) {
+ logeventf(ssh, "Local X11 connection failed: %s", x11err);
error = "Unable to open an X11 connection";
} else {
logevent("Opening X11 forward connection succeeded");
const char *e = pfd_newconnect(&c->u.pfd.s,
realpf->dhost,
realpf->dport, c,
- &ssh->cfg,
+ ssh->conf,
realpf->pfrec->addressfamily);
logeventf(ssh, "Attempting to forward remote port to "
"%s:%d", realpf->dhost, realpf->dport);
else {
c->type = CHAN_AGENT; /* identify channel type */
c->u.a.lensofar = 0;
+ c->u.a.outstanding_requests = 0;
}
} else {
error = "Unsupported channel type requested";
logeventf(ssh, "Rejected channel open: %s", error);
sfree(c);
} else {
- c->localid = alloc_channel_id(ssh);
- c->closes = 0;
- c->v.v2.locwindow = OUR_V2_WINSIZE;
+ ssh2_channel_init(c);
c->v.v2.remwindow = winsize;
c->v.v2.remmaxpkt = pktsize;
- bufchain_init(&c->v.v2.outbuffer);
add234(ssh->channels, c);
pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN_CONFIRMATION);
ssh2_pkt_adduint32(pktout, c->remoteid);
}
/*
- * Buffer banner messages for later display at some convenient point.
+ * Buffer banner messages for later display at some convenient point,
+ * if we're going to display them.
*/
static void ssh2_msg_userauth_banner(Ssh ssh, struct Packet *pktin)
{
/* Arbitrary limit to prevent unbounded inflation of buffer */
- if (bufchain_size(&ssh->banner) <= 131072) {
+ if (conf_get_int(ssh->conf, CONF_ssh_show_banner) &&
+ bufchain_size(&ssh->banner) <= 131072) {
char *banner = NULL;
int size = 0;
ssh_pkt_getstring(pktin, &banner, &size);
ssh2_pkt_adduint32(pktout, arg);
}
-/*
- * Handle the SSH-2 userauth and connection layers.
- */
-static void do_ssh2_authconn(Ssh ssh, unsigned char *in, int inlen,
- struct Packet *pktin)
+static void ssh2_setup_x11(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
{
- struct do_ssh2_authconn_state {
- enum {
- AUTH_INVALID, AUTH_PUBLICKEY_AGENT, AUTH_PUBLICKEY_FILE,
- AUTH_PASSWORD,
- AUTH_KEYBOARD_INTERACTIVE
- } method;
- enum {
- AUTH_TYPE_NONE,
- AUTH_TYPE_PUBLICKEY,
- AUTH_TYPE_PUBLICKEY_OFFER_LOUD,
- AUTH_TYPE_PUBLICKEY_OFFER_QUIET,
- AUTH_TYPE_PASSWORD,
- AUTH_TYPE_KEYBOARD_INTERACTIVE,
- AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET
- } type;
- int done_service_req;
- int gotit, need_pw, can_pubkey, can_passwd, can_keyb_inter;
- int tried_pubkey_config, tried_agent;
- int kbd_inter_running, kbd_inter_refused;
- int we_are_in;
- int num_prompts, curr_prompt, echo;
- char username[100];
+ struct ssh2_setup_x11_state {
+ int crLine;
+ };
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ crStateP(ssh2_setup_x11_state, ctx);
+
+ crBeginState;
+
+ logevent("Requesting X11 forwarding");
+ pktout = ssh2_chanreq_init(ssh->mainchan, "x11-req",
+ ssh2_setup_x11, s);
+ ssh2_pkt_addbool(pktout, 0); /* many connections */
+ ssh2_pkt_addstring(pktout, ssh->x11disp->remoteauthprotoname);
+ /*
+ * Note that while we blank the X authentication data here, we don't
+ * take any special action to blank the start of an X11 channel,
+ * so using MIT-MAGIC-COOKIE-1 and actually opening an X connection
+ * without having session blanking enabled is likely to leak your
+ * cookie into the log.
+ */
+ dont_log_password(ssh, pktout, PKTLOG_BLANK);
+ ssh2_pkt_addstring(pktout, ssh->x11disp->remoteauthdatastring);
+ end_log_omission(ssh, pktout);
+ ssh2_pkt_adduint32(pktout, ssh->x11disp->screennum);
+ ssh2_pkt_send(ssh, pktout);
+
+ /* Wait to be called back with either a response packet, or NULL
+ * meaning clean up and free our data */
+ crReturnV;
+
+ if (pktin) {
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS) {
+ logevent("X11 forwarding enabled");
+ ssh->X11_fwd_enabled = TRUE;
+ } else
+ logevent("X11 forwarding refused");
+ }
+
+ crFinishFreeV;
+}
+
+static void ssh2_setup_agent(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
+{
+ struct ssh2_setup_agent_state {
+ int crLine;
+ };
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ crStateP(ssh2_setup_agent_state, ctx);
+
+ crBeginState;
+
+ logevent("Requesting OpenSSH-style agent forwarding");
+ pktout = ssh2_chanreq_init(ssh->mainchan, "auth-agent-req@openssh.com",
+ ssh2_setup_agent, s);
+ ssh2_pkt_send(ssh, pktout);
+
+ /* Wait to be called back with either a response packet, or NULL
+ * meaning clean up and free our data */
+ crReturnV;
+
+ if (pktin) {
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS) {
+ logevent("Agent forwarding enabled");
+ ssh->agentfwd_enabled = TRUE;
+ } else
+ logevent("Agent forwarding refused");
+ }
+
+ crFinishFreeV;
+}
+
+static void ssh2_setup_pty(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
+{
+ struct ssh2_setup_pty_state {
+ int crLine;
+ };
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ crStateP(ssh2_setup_pty_state, ctx);
+
+ crBeginState;
+
+ /* Unpick the terminal-speed string. */
+ /* XXX perhaps we should allow no speeds to be sent. */
+ ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
+ sscanf(conf_get_str(ssh->conf, CONF_termspeed), "%d,%d", &ssh->ospeed, &ssh->ispeed);
+ /* Build the pty request. */
+ pktout = ssh2_chanreq_init(ssh->mainchan, "pty-req",
+ ssh2_setup_pty, s);
+ ssh2_pkt_addstring(pktout, conf_get_str(ssh->conf, CONF_termtype));
+ ssh2_pkt_adduint32(pktout, ssh->term_width);
+ ssh2_pkt_adduint32(pktout, ssh->term_height);
+ ssh2_pkt_adduint32(pktout, 0); /* pixel width */
+ ssh2_pkt_adduint32(pktout, 0); /* pixel height */
+ ssh2_pkt_addstring_start(pktout);
+ parse_ttymodes(ssh, ssh2_send_ttymode, (void *)pktout);
+ ssh2_pkt_addbyte(pktout, SSH2_TTY_OP_ISPEED);
+ ssh2_pkt_adduint32(pktout, ssh->ispeed);
+ ssh2_pkt_addbyte(pktout, SSH2_TTY_OP_OSPEED);
+ ssh2_pkt_adduint32(pktout, ssh->ospeed);
+ ssh2_pkt_addstring_data(pktout, "\0", 1); /* TTY_OP_END */
+ ssh2_pkt_send(ssh, pktout);
+ ssh->state = SSH_STATE_INTERMED;
+
+ /* Wait to be called back with either a response packet, or NULL
+ * meaning clean up and free our data */
+ crReturnV;
+
+ if (pktin) {
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS) {
+ logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
+ ssh->ospeed, ssh->ispeed);
+ ssh->got_pty = TRUE;
+ } else {
+ c_write_str(ssh, "Server refused to allocate pty\r\n");
+ ssh->editing = ssh->echoing = 1;
+ }
+ }
+
+ crFinishFreeV;
+}
+
+static void ssh2_setup_env(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
+{
+ struct ssh2_setup_env_state {
+ int crLine;
+ int num_env, env_left, env_ok;
+ };
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ crStateP(ssh2_setup_env_state, ctx);
+
+ crBeginState;
+
+ /*
+ * Send environment variables.
+ *
+ * Simplest thing here is to send all the requests at once, and
+ * then wait for a whole bunch of successes or failures.
+ */
+ s->num_env = 0;
+ {
+ char *key, *val;
+
+ for (val = conf_get_str_strs(ssh->conf, CONF_environmt, NULL, &key);
+ val != NULL;
+ val = conf_get_str_strs(ssh->conf, CONF_environmt, key, &key)) {
+ pktout = ssh2_chanreq_init(ssh->mainchan, "env", ssh2_setup_env, s);
+ ssh2_pkt_addstring(pktout, key);
+ ssh2_pkt_addstring(pktout, val);
+ ssh2_pkt_send(ssh, pktout);
+
+ s->num_env++;
+ }
+ if (s->num_env)
+ logeventf(ssh, "Sent %d environment variables", s->num_env);
+ }
+
+ if (s->num_env) {
+ s->env_ok = 0;
+ s->env_left = s->num_env;
+
+ while (s->env_left > 0) {
+ /* Wait to be called back with either a response packet,
+ * or NULL meaning clean up and free our data */
+ crReturnV;
+ if (!pktin) goto out;
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS)
+ s->env_ok++;
+ s->env_left--;
+ }
+
+ if (s->env_ok == s->num_env) {
+ logevent("All environment variables successfully set");
+ } else if (s->env_ok == 0) {
+ logevent("All environment variables refused");
+ c_write_str(ssh, "Server refused to set environment variables\r\n");
+ } else {
+ logeventf(ssh, "%d environment variables refused",
+ s->num_env - s->env_ok);
+ c_write_str(ssh, "Server refused to set all environment variables\r\n");
+ }
+ }
+ out:;
+ crFinishFreeV;
+}
+
+/*
+ * Handle the SSH-2 userauth and connection layers.
+ */
+static void ssh2_msg_authconn(Ssh ssh, struct Packet *pktin)
+{
+ do_ssh2_authconn(ssh, NULL, 0, pktin);
+}
+
+static void ssh2_response_authconn(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
+{
+ do_ssh2_authconn(c->ssh, NULL, 0, pktin);
+}
+
+static void do_ssh2_authconn(Ssh ssh, unsigned char *in, int inlen,
+ struct Packet *pktin)
+{
+ struct do_ssh2_authconn_state {
+ int crLine;
+ enum {
+ AUTH_TYPE_NONE,
+ AUTH_TYPE_PUBLICKEY,
+ AUTH_TYPE_PUBLICKEY_OFFER_LOUD,
+ AUTH_TYPE_PUBLICKEY_OFFER_QUIET,
+ AUTH_TYPE_PASSWORD,
+ AUTH_TYPE_GSSAPI, /* always QUIET */
+ AUTH_TYPE_KEYBOARD_INTERACTIVE,
+ AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET
+ } type;
+ int done_service_req;
+ int gotit, need_pw, can_pubkey, can_passwd, can_keyb_inter;
+ int tried_pubkey_config, done_agent;
+#ifndef NO_GSSAPI
+ int can_gssapi;
+ int tried_gssapi;
+#endif
+ int kbd_inter_refused;
+ int we_are_in, userauth_success;
+ prompts_t *cur_prompt;
+ int num_prompts;
+ char *username;
+ char *password;
int got_username;
- char pwprompt[512];
- char password[100];
void *publickey_blob;
int publickey_bloblen;
- unsigned char request[5], *response, *p;
- int responselen;
+ int publickey_encrypted;
+ char *publickey_algorithm;
+ char *publickey_comment;
+ unsigned char agent_request[5], *agent_response, *agentp;
+ int agent_responselen;
+ unsigned char *pkblob_in_agent;
int keyi, nkeys;
- int authed;
char *pkblob, *alg, *commentp;
int pklen, alglen, commentlen;
int siglen, retlen, len;
char *q, *agentreq, *ret;
int try_send;
- int num_env, env_left, env_ok;
struct Packet *pktout;
+ Filename *keyfile;
+#ifndef NO_GSSAPI
+ struct ssh_gss_library *gsslib;
+ Ssh_gss_ctx gss_ctx;
+ Ssh_gss_buf gss_buf;
+ Ssh_gss_buf gss_rcvtok, gss_sndtok;
+ Ssh_gss_name gss_srv_name;
+ Ssh_gss_stat gss_stat;
+#endif
};
crState(do_ssh2_authconn_state);
- crBegin(ssh->do_ssh2_authconn_crstate);
-
+ crBeginState;
+
+ /* Register as a handler for all the messages this coroutine handles. */
+ ssh->packet_dispatch[SSH2_MSG_SERVICE_ACCEPT] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_REQUEST] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_FAILURE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_SUCCESS] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_PK_OK] = ssh2_msg_authconn;
+ /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ] = ssh2_msg_authconn; duplicate case value */
+ /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_REQUEST] = ssh2_msg_authconn; duplicate case value */
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_RESPONSE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_GLOBAL_REQUEST] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_REQUEST_SUCCESS] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_REQUEST_FAILURE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_CONFIRMATION] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_FAILURE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_WINDOW_ADJUST] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_DATA] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EXTENDED_DATA] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EOF] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_CLOSE] = ssh2_msg_authconn;
+
s->done_service_req = FALSE;
- s->we_are_in = FALSE;
- if (!ssh->cfg.ssh_no_userauth) {
+ s->we_are_in = s->userauth_success = FALSE;
+#ifndef NO_GSSAPI
+ s->tried_gssapi = FALSE;
+#endif
+
+ if (!conf_get_int(ssh->conf, CONF_ssh_no_userauth)) {
/*
* Request userauth protocol, and await a response to it.
*/
}
}
+ /* Arrange to be able to deal with any BANNERs that come in.
+ * (We do this now as packets may come in during the next bit.) */
+ bufchain_init(&ssh->banner);
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] =
+ ssh2_msg_userauth_banner;
+
+ /*
+ * Misc one-time setup for authentication.
+ */
+ s->publickey_blob = NULL;
+ if (!s->we_are_in) {
+
+ /*
+ * Load the public half of any configured public key file
+ * for later use.
+ */
+ s->keyfile = conf_get_filename(ssh->conf, CONF_keyfile);
+ if (!filename_is_null(s->keyfile)) {
+ int keytype;
+ logeventf(ssh, "Reading private key file \"%.150s\"",
+ filename_to_str(s->keyfile));
+ keytype = key_type(s->keyfile);
+ if (keytype == SSH_KEYTYPE_SSH2) {
+ const char *error;
+ s->publickey_blob =
+ ssh2_userkey_loadpub(s->keyfile,
+ &s->publickey_algorithm,
+ &s->publickey_bloblen,
+ &s->publickey_comment, &error);
+ if (s->publickey_blob) {
+ s->publickey_encrypted =
+ ssh2_userkey_encrypted(s->keyfile, NULL);
+ } else {
+ char *msgbuf;
+ logeventf(ssh, "Unable to load private key (%s)",
+ error);
+ msgbuf = dupprintf("Unable to load private key file "
+ "\"%.150s\" (%s)\r\n",
+ filename_to_str(s->keyfile),
+ error);
+ c_write_str(ssh, msgbuf);
+ sfree(msgbuf);
+ }
+ } else {
+ char *msgbuf;
+ logeventf(ssh, "Unable to use this key file (%s)",
+ key_type_to_str(keytype));
+ msgbuf = dupprintf("Unable to use key file \"%.150s\""
+ " (%s)\r\n",
+ filename_to_str(s->keyfile),
+ key_type_to_str(keytype));
+ c_write_str(ssh, msgbuf);
+ sfree(msgbuf);
+ s->publickey_blob = NULL;
+ }
+ }
+
+ /*
+ * Find out about any keys Pageant has (but if there's a
+ * public key configured, filter out all others).
+ */
+ s->nkeys = 0;
+ s->agent_response = NULL;
+ s->pkblob_in_agent = NULL;
+ if (conf_get_int(ssh->conf, CONF_tryagent) && agent_exists()) {
+
+ void *r;
+
+ logevent("Pageant is running. Requesting keys.");
+
+ /* Request the keys held by the agent. */
+ PUT_32BIT(s->agent_request, 1);
+ s->agent_request[4] = SSH2_AGENTC_REQUEST_IDENTITIES;
+ if (!agent_query(s->agent_request, 5, &r, &s->agent_responselen,
+ ssh_agent_callback, ssh)) {
+ do {
+ crReturnV;
+ if (pktin) {
+ bombout(("Unexpected data from server while"
+ " waiting for agent response"));
+ crStopV;
+ }
+ } while (pktin || inlen > 0);
+ r = ssh->agent_response;
+ s->agent_responselen = ssh->agent_response_len;
+ }
+ s->agent_response = (unsigned char *) r;
+ if (s->agent_response && s->agent_responselen >= 5 &&
+ s->agent_response[4] == SSH2_AGENT_IDENTITIES_ANSWER) {
+ int keyi;
+ unsigned char *p;
+ p = s->agent_response + 5;
+ s->nkeys = toint(GET_32BIT(p));
+
+ /*
+ * Vet the Pageant response to ensure that the key
+ * count and blob lengths make sense.
+ */
+ if (s->nkeys < 0) {
+ logeventf(ssh, "Pageant response contained a negative"
+ " key count %d", s->nkeys);
+ s->nkeys = 0;
+ goto done_agent_query;
+ } else {
+ unsigned char *q = p + 4;
+ int lenleft = s->agent_responselen - 5 - 4;
+
+ for (keyi = 0; keyi < s->nkeys; keyi++) {
+ int bloblen, commentlen;
+ if (lenleft < 4) {
+ logeventf(ssh, "Pageant response was truncated");
+ s->nkeys = 0;
+ goto done_agent_query;
+ }
+ bloblen = toint(GET_32BIT(q));
+ if (bloblen < 0 || bloblen > lenleft) {
+ logeventf(ssh, "Pageant response was truncated");
+ s->nkeys = 0;
+ goto done_agent_query;
+ }
+ lenleft -= 4 + bloblen;
+ q += 4 + bloblen;
+ commentlen = toint(GET_32BIT(q));
+ if (commentlen < 0 || commentlen > lenleft) {
+ logeventf(ssh, "Pageant response was truncated");
+ s->nkeys = 0;
+ goto done_agent_query;
+ }
+ lenleft -= 4 + commentlen;
+ q += 4 + commentlen;
+ }
+ }
+
+ p += 4;
+ logeventf(ssh, "Pageant has %d SSH-2 keys", s->nkeys);
+ if (s->publickey_blob) {
+ /* See if configured key is in agent. */
+ for (keyi = 0; keyi < s->nkeys; keyi++) {
+ s->pklen = toint(GET_32BIT(p));
+ if (s->pklen == s->publickey_bloblen &&
+ !memcmp(p+4, s->publickey_blob,
+ s->publickey_bloblen)) {
+ logeventf(ssh, "Pageant key #%d matches "
+ "configured key file", keyi);
+ s->keyi = keyi;
+ s->pkblob_in_agent = p;
+ break;
+ }
+ p += 4 + s->pklen;
+ p += toint(GET_32BIT(p)) + 4; /* comment */
+ }
+ if (!s->pkblob_in_agent) {
+ logevent("Configured key file not in Pageant");
+ s->nkeys = 0;
+ }
+ }
+ } else {
+ logevent("Failed to get reply from Pageant");
+ }
+ done_agent_query:;
+ }
+
+ }
+
/*
* We repeat this whole loop, including the username prompt,
* until we manage a successful authentication. If the user
* the username they will want to be able to get back and
* retype it!
*/
- s->username[0] = '\0';
s->got_username = FALSE;
- bufchain_init(&ssh->banner);
- ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] =
- ssh2_msg_userauth_banner;
while (!s->we_are_in) {
/*
* Get a username.
*/
- if (s->got_username && !ssh->cfg.change_username) {
+ if (s->got_username && !conf_get_int(ssh->conf, CONF_change_username)) {
/*
* We got a username last time round this loop, and
* with change_username turned off we don't try to get
* it again.
*/
- } else if (!*ssh->cfg.username) {
- if (ssh_get_line && !ssh_getline_pw_only) {
- if (!ssh_get_line("login as: ",
- s->username, sizeof(s->username), FALSE)) {
- /*
- * get_line failed to get a username.
- * Terminate.
- */
- ssh_disconnect(ssh, "No username provided", NULL, 0, TRUE);
- crStopV;
- }
- } else {
- int ret; /* need not be saved across crReturn */
- c_write_str(ssh, "login as: ");
+ } else if ((ssh->username = get_remote_username(ssh->conf)) == NULL) {
+ int ret; /* need not be kept over crReturn */
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH login name");
+ add_prompt(s->cur_prompt, dupstr("login as: "), TRUE);
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
ssh->send_ok = 1;
- setup_userpass_input(ssh, s->username, sizeof(s->username), 1);
- do {
- crWaitUntilV(!pktin);
- ret = process_userpass_input(ssh, in, inlen);
- } while (ret == 0);
- if (ret < 0)
- cleanup_exit(0);
- c_write_str(ssh, "\r\n");
+ crWaitUntilV(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
}
- s->username[strcspn(s->username, "\n\r")] = '\0';
+ if (!ret) {
+ /*
+ * get_userpass_input() failed to get a username.
+ * Terminate.
+ */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, "No username provided", NULL, 0, TRUE);
+ crStopV;
+ }
+ ssh->username = dupstr(s->cur_prompt->prompts[0]->result);
+ free_prompts(s->cur_prompt);
} else {
char *stuff;
- strncpy(s->username, ssh->cfg.username, sizeof(s->username));
- s->username[sizeof(s->username)-1] = '\0';
if ((flags & FLAG_VERBOSE) || (flags & FLAG_INTERACTIVE)) {
- stuff = dupprintf("Using username \"%s\".\r\n", s->username);
+ stuff = dupprintf("Using username \"%s\".\r\n", ssh->username);
c_write_str(ssh, stuff);
sfree(stuff);
}
* just in case it succeeds, and (b) so that we know what
* authentication methods we can usefully try next.
*/
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
+ ssh->pkt_actx = SSH2_PKTCTX_NOAUTH;
s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(s->pktout, s->username);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
ssh2_pkt_addstring(s->pktout, "ssh-connection");/* service requested */
ssh2_pkt_addstring(s->pktout, "none"); /* method */
ssh2_pkt_send(ssh, s->pktout);
s->we_are_in = FALSE;
s->tried_pubkey_config = FALSE;
- s->tried_agent = FALSE;
- s->kbd_inter_running = FALSE;
s->kbd_inter_refused = FALSE;
- /* Load the pub half of ssh->cfg.keyfile so we notice if it's in Pageant */
- if (!filename_is_null(ssh->cfg.keyfile)) {
- int keytype;
- logeventf(ssh, "Reading private key file \"%.150s\"",
- filename_to_str(&ssh->cfg.keyfile));
- keytype = key_type(&ssh->cfg.keyfile);
- if (keytype == SSH_KEYTYPE_SSH2) {
- s->publickey_blob =
- ssh2_userkey_loadpub(&ssh->cfg.keyfile, NULL,
- &s->publickey_bloblen, NULL);
+
+ /* Reset agent request state. */
+ s->done_agent = FALSE;
+ if (s->agent_response) {
+ if (s->pkblob_in_agent) {
+ s->agentp = s->pkblob_in_agent;
} else {
- char *msgbuf;
- logeventf(ssh, "Unable to use this key file (%s)",
- key_type_to_str(keytype));
- msgbuf = dupprintf("Unable to use key file \"%.150s\""
- " (%s)\r\n",
- filename_to_str(&ssh->cfg.keyfile),
- key_type_to_str(keytype));
- c_write_str(ssh, msgbuf);
- sfree(msgbuf);
- s->publickey_blob = NULL;
+ s->agentp = s->agent_response + 5 + 4;
+ s->keyi = 0;
}
- } else
- s->publickey_blob = NULL;
+ }
while (1) {
+ char *methods = NULL;
+ int methlen = 0;
+
/*
* Wait for the result of the last authentication request.
*/
}
if (pktin->type == SSH2_MSG_USERAUTH_SUCCESS) {
logevent("Access granted");
- s->we_are_in = TRUE;
+ s->we_are_in = s->userauth_success = TRUE;
break;
}
- if (s->kbd_inter_running &&
- pktin->type == SSH2_MSG_USERAUTH_INFO_REQUEST) {
- /*
- * This is either a further set-of-prompts packet
- * in keyboard-interactive authentication, or it's
- * the same one and we came back here with `gotit'
- * set. In the former case, we must reset the
- * curr_prompt variable.
- */
- if (!s->gotit)
- s->curr_prompt = 0;
- } else if (pktin->type == SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ) {
- /* FIXME: perhaps we should support this? */
- bombout(("PASSWD_CHANGEREQ not yet supported"));
- crStopV;
- } else if (pktin->type != SSH2_MSG_USERAUTH_FAILURE) {
- bombout(("Strange packet received during authentication: type %d",
- pktin->type));
+ if (pktin->type != SSH2_MSG_USERAUTH_FAILURE && s->type != AUTH_TYPE_GSSAPI) {
+ bombout(("Strange packet received during authentication: "
+ "type %d", pktin->type));
crStopV;
}
* helpfully try next.
*/
if (pktin->type == SSH2_MSG_USERAUTH_FAILURE) {
- char *methods;
- int methlen;
ssh_pkt_getstring(pktin, &methods, &methlen);
- s->kbd_inter_running = FALSE;
if (!ssh2_pkt_getbool(pktin)) {
/*
* We have received an unequivocal Access
* Denied. This can translate to a variety of
- * messages:
- *
- * - if we'd just tried "none" authentication,
- * it's not worth printing anything at all
- *
- * - if we'd just tried a public key _offer_,
- * the message should be "Server refused our
- * key" (or no message at all if the key
- * came from Pageant)
- *
- * - if we'd just tried anything else, the
- * message really should be "Access denied".
- *
+ * messages, or no message at all.
+ *
+ * For forms of authentication which are attempted
+ * implicitly, by which I mean without printing
+ * anything in the window indicating that we're
+ * trying them, we should never print 'Access
+ * denied'.
+ *
+ * If we do print a message saying that we're
+ * attempting some kind of authentication, it's OK
+ * to print a followup message saying it failed -
+ * but the message may sometimes be more specific
+ * than simply 'Access denied'.
+ *
* Additionally, if we'd just tried password
* authentication, we should break out of this
* whole loop so as to go back to the username
s->type == AUTH_TYPE_PUBLICKEY_OFFER_QUIET) {
if (s->type == AUTH_TYPE_PUBLICKEY_OFFER_LOUD)
c_write_str(ssh, "Server refused our key\r\n");
- logevent("Server refused public key");
+ logevent("Server refused our key");
+ } else if (s->type == AUTH_TYPE_PUBLICKEY) {
+ /* This _shouldn't_ happen except by a
+ * protocol bug causing client and server to
+ * disagree on what is a correct signature. */
+ c_write_str(ssh, "Server refused public-key signature"
+ " despite accepting key!\r\n");
+ logevent("Server refused public-key signature"
+ " despite accepting key!");
} else if (s->type==AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET) {
- /* server declined keyboard-interactive; ignore */
- } else {
+ /* quiet, so no c_write */
+ logevent("Server refused keyboard-interactive authentication");
+ } else if (s->type==AUTH_TYPE_GSSAPI) {
+ /* always quiet, so no c_write */
+ /* also, the code down in the GSSAPI block has
+ * already logged this in the Event Log */
+ } else if (s->type == AUTH_TYPE_KEYBOARD_INTERACTIVE) {
+ logevent("Keyboard-interactive authentication failed");
+ c_write_str(ssh, "Access denied\r\n");
+ } else {
+ assert(s->type == AUTH_TYPE_PASSWORD);
+ logevent("Password authentication failed");
c_write_str(ssh, "Access denied\r\n");
- logevent("Access denied");
- if (s->type == AUTH_TYPE_PASSWORD &&
- ssh->cfg.change_username) {
+
+ if (conf_get_int(ssh->conf, CONF_change_username)) {
/* XXX perhaps we should allow
* keyboard-interactive to do this too? */
s->we_are_in = FALSE;
in_commasep_string("publickey", methods, methlen);
s->can_passwd =
in_commasep_string("password", methods, methlen);
- s->can_keyb_inter = ssh->cfg.try_ki_auth &&
+ s->can_keyb_inter = conf_get_int(ssh->conf, CONF_try_ki_auth) &&
in_commasep_string("keyboard-interactive", methods, methlen);
+#ifndef NO_GSSAPI
+ if (!ssh->gsslibs)
+ ssh->gsslibs = ssh_gss_setup(ssh->conf);
+ s->can_gssapi = conf_get_int(ssh->conf, CONF_try_gssapi_auth) &&
+ in_commasep_string("gssapi-with-mic", methods, methlen) &&
+ ssh->gsslibs->nlibraries > 0;
+#endif
}
- s->method = 0;
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- s->need_pw = FALSE;
+ ssh->pkt_actx = SSH2_PKTCTX_NOAUTH;
- /*
- * Most password/passphrase prompts will be
- * non-echoing, so we set this to 0 by default.
- * Exception is that some keyboard-interactive prompts
- * can be echoing, in which case we'll set this to 1.
- */
- s->echo = 0;
+ if (s->can_pubkey && !s->done_agent && s->nkeys) {
- if (!s->method && s->can_pubkey &&
- agent_exists() && !s->tried_agent) {
/*
- * Attempt public-key authentication using Pageant.
+ * Attempt public-key authentication using a key from Pageant.
*/
- void *r;
- s->authed = FALSE;
-
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh->pkt_ctx |= SSH2_PKTCTX_PUBLICKEY;
-
- s->tried_agent = TRUE;
-
- logevent("Pageant is running. Requesting keys.");
-
- /* Request the keys held by the agent. */
- PUT_32BIT(s->request, 1);
- s->request[4] = SSH2_AGENTC_REQUEST_IDENTITIES;
- if (!agent_query(s->request, 5, &r, &s->responselen,
- ssh_agent_callback, ssh)) {
- do {
- crReturnV;
- if (pktin) {
- bombout(("Unexpected data from server while"
- " waiting for agent response"));
- crStopV;
- }
- } while (pktin || inlen > 0);
- r = ssh->agent_response;
- s->responselen = ssh->agent_response_len;
- }
- s->response = (unsigned char *) r;
- if (s->response && s->responselen >= 5 &&
- s->response[4] == SSH2_AGENT_IDENTITIES_ANSWER) {
- s->p = s->response + 5;
- s->nkeys = GET_32BIT(s->p);
- s->p += 4;
- logeventf(ssh, "Pageant has %d SSH-2 keys", s->nkeys);
- for (s->keyi = 0; s->keyi < s->nkeys; s->keyi++) {
- void *vret;
- logeventf(ssh, "Trying Pageant key #%d", s->keyi);
- s->pklen = GET_32BIT(s->p);
- s->p += 4;
- if (s->publickey_blob &&
- s->pklen == s->publickey_bloblen &&
- !memcmp(s->p, s->publickey_blob,
- s->publickey_bloblen)) {
- logevent("This key matches configured key file");
- s->tried_pubkey_config = 1;
- }
- s->pkblob = (char *)s->p;
- s->p += s->pklen;
- s->alglen = GET_32BIT(s->pkblob);
- s->alg = s->pkblob + 4;
- s->commentlen = GET_32BIT(s->p);
- s->p += 4;
- s->commentp = (char *)s->p;
- s->p += s->commentlen;
- s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(s->pktout, s->username);
- ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
- ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
- ssh2_pkt_addbool(s->pktout, FALSE); /* no signature included */
- ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
- ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
- ssh2_pkt_send(ssh, s->pktout);
+ ssh->pkt_actx = SSH2_PKTCTX_PUBLICKEY;
- crWaitUntilV(pktin);
- if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
- logevent("Key refused");
- continue;
- }
+ logeventf(ssh, "Trying Pageant key #%d", s->keyi);
- if (flags & FLAG_VERBOSE) {
- c_write_str(ssh, "Authenticating with "
- "public key \"");
- c_write(ssh, s->commentp, s->commentlen);
- c_write_str(ssh, "\" from agent\r\n");
- }
+ /* Unpack key from agent response */
+ s->pklen = toint(GET_32BIT(s->agentp));
+ s->agentp += 4;
+ s->pkblob = (char *)s->agentp;
+ s->agentp += s->pklen;
+ s->alglen = toint(GET_32BIT(s->pkblob));
+ s->alg = s->pkblob + 4;
+ s->commentlen = toint(GET_32BIT(s->agentp));
+ s->agentp += 4;
+ s->commentp = (char *)s->agentp;
+ s->agentp += s->commentlen;
+ /* s->agentp now points at next key, if any */
- /*
- * Server is willing to accept the key.
- * Construct a SIGN_REQUEST.
- */
- s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(s->pktout, s->username);
- ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
- ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
- ssh2_pkt_addbool(s->pktout, TRUE);
- ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
- ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
-
- s->siglen = s->pktout->length - 5 + 4 +
- ssh->v2_session_id_len;
- if (ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)
- s->siglen -= 4;
- s->len = 1; /* message type */
- s->len += 4 + s->pklen; /* key blob */
- s->len += 4 + s->siglen; /* data to sign */
- s->len += 4; /* flags */
- s->agentreq = snewn(4 + s->len, char);
- PUT_32BIT(s->agentreq, s->len);
- s->q = s->agentreq + 4;
- *s->q++ = SSH2_AGENTC_SIGN_REQUEST;
- PUT_32BIT(s->q, s->pklen);
- s->q += 4;
- memcpy(s->q, s->pkblob, s->pklen);
- s->q += s->pklen;
- PUT_32BIT(s->q, s->siglen);
+ /* See if server will accept it */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "publickey");
+ /* method */
+ ssh2_pkt_addbool(s->pktout, FALSE); /* no signature included */
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
+ ssh2_pkt_send(ssh, s->pktout);
+ s->type = AUTH_TYPE_PUBLICKEY_OFFER_QUIET;
+
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
+
+ /* Offer of key refused. */
+ s->gotit = TRUE;
+
+ } else {
+
+ void *vret;
+
+ if (flags & FLAG_VERBOSE) {
+ c_write_str(ssh, "Authenticating with "
+ "public key \"");
+ c_write(ssh, s->commentp, s->commentlen);
+ c_write_str(ssh, "\" from agent\r\n");
+ }
+
+ /*
+ * Server is willing to accept the key.
+ * Construct a SIGN_REQUEST.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "publickey");
+ /* method */
+ ssh2_pkt_addbool(s->pktout, TRUE); /* signature included */
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->alg, s->alglen);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout, s->pkblob, s->pklen);
+
+ /* Ask agent for signature. */
+ s->siglen = s->pktout->length - 5 + 4 +
+ ssh->v2_session_id_len;
+ if (ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)
+ s->siglen -= 4;
+ s->len = 1; /* message type */
+ s->len += 4 + s->pklen; /* key blob */
+ s->len += 4 + s->siglen; /* data to sign */
+ s->len += 4; /* flags */
+ s->agentreq = snewn(4 + s->len, char);
+ PUT_32BIT(s->agentreq, s->len);
+ s->q = s->agentreq + 4;
+ *s->q++ = SSH2_AGENTC_SIGN_REQUEST;
+ PUT_32BIT(s->q, s->pklen);
+ s->q += 4;
+ memcpy(s->q, s->pkblob, s->pklen);
+ s->q += s->pklen;
+ PUT_32BIT(s->q, s->siglen);
+ s->q += 4;
+ /* Now the data to be signed... */
+ if (!(ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)) {
+ PUT_32BIT(s->q, ssh->v2_session_id_len);
s->q += 4;
- /* Now the data to be signed... */
- if (!(ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)) {
- PUT_32BIT(s->q, ssh->v2_session_id_len);
- s->q += 4;
- }
- memcpy(s->q, ssh->v2_session_id,
- ssh->v2_session_id_len);
- s->q += ssh->v2_session_id_len;
- memcpy(s->q, s->pktout->data + 5,
- s->pktout->length - 5);
- s->q += s->pktout->length - 5;
- /* And finally the (zero) flags word. */
- PUT_32BIT(s->q, 0);
- if (!agent_query(s->agentreq, s->len + 4,
- &vret, &s->retlen,
- ssh_agent_callback, ssh)) {
- do {
- crReturnV;
- if (pktin) {
- bombout(("Unexpected data from server"
- " while waiting for agent"
- " response"));
- crStopV;
- }
- } while (pktin || inlen > 0);
- vret = ssh->agent_response;
- s->retlen = ssh->agent_response_len;
- }
- s->ret = vret;
- sfree(s->agentreq);
- if (s->ret) {
- if (s->ret[4] == SSH2_AGENT_SIGN_RESPONSE) {
- logevent("Sending Pageant's response");
- ssh2_add_sigblob(ssh, s->pktout,
- s->pkblob, s->pklen,
- s->ret + 9,
- GET_32BIT(s->ret + 5));
- ssh2_pkt_send(ssh, s->pktout);
- s->authed = TRUE;
- break;
- } else {
- logevent
- ("Pageant failed to answer challenge");
- sfree(s->ret);
+ }
+ memcpy(s->q, ssh->v2_session_id,
+ ssh->v2_session_id_len);
+ s->q += ssh->v2_session_id_len;
+ memcpy(s->q, s->pktout->data + 5,
+ s->pktout->length - 5);
+ s->q += s->pktout->length - 5;
+ /* And finally the (zero) flags word. */
+ PUT_32BIT(s->q, 0);
+ if (!agent_query(s->agentreq, s->len + 4,
+ &vret, &s->retlen,
+ ssh_agent_callback, ssh)) {
+ do {
+ crReturnV;
+ if (pktin) {
+ bombout(("Unexpected data from server"
+ " while waiting for agent"
+ " response"));
+ crStopV;
}
+ } while (pktin || inlen > 0);
+ vret = ssh->agent_response;
+ s->retlen = ssh->agent_response_len;
+ }
+ s->ret = vret;
+ sfree(s->agentreq);
+ if (s->ret) {
+ if (s->retlen >= 9 &&
+ s->ret[4] == SSH2_AGENT_SIGN_RESPONSE &&
+ GET_32BIT(s->ret + 5) <= (unsigned)(s->retlen-9)) {
+ logevent("Sending Pageant's response");
+ ssh2_add_sigblob(ssh, s->pktout,
+ s->pkblob, s->pklen,
+ s->ret + 9,
+ GET_32BIT(s->ret + 5));
+ ssh2_pkt_send(ssh, s->pktout);
+ s->type = AUTH_TYPE_PUBLICKEY;
+ } else {
+ /* FIXME: less drastic response */
+ bombout(("Pageant failed to answer challenge"));
+ crStopV;
}
}
- if (s->authed)
- continue;
}
- sfree(s->response);
- }
- if (!s->method && s->can_pubkey && s->publickey_blob
- && !s->tried_pubkey_config) {
- unsigned char *pub_blob;
- char *algorithm, *comment;
- int pub_blob_len;
+ /* Do we have any keys left to try? */
+ if (s->pkblob_in_agent) {
+ s->done_agent = TRUE;
+ s->tried_pubkey_config = TRUE;
+ } else {
+ s->keyi++;
+ if (s->keyi >= s->nkeys)
+ s->done_agent = TRUE;
+ }
- s->tried_pubkey_config = TRUE;
+ } else if (s->can_pubkey && s->publickey_blob &&
+ !s->tried_pubkey_config) {
+
+ struct ssh2_userkey *key; /* not live over crReturn */
+ char *passphrase; /* not live over crReturn */
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh->pkt_ctx |= SSH2_PKTCTX_PUBLICKEY;
+ ssh->pkt_actx = SSH2_PKTCTX_PUBLICKEY;
+
+ s->tried_pubkey_config = TRUE;
/*
* Try the public key supplied in the configuration.
* First, offer the public blob to see if the server is
* willing to accept it.
*/
- pub_blob =
- (unsigned char *)ssh2_userkey_loadpub(&ssh->cfg.keyfile,
- &algorithm,
- &pub_blob_len,
- NULL);
- if (pub_blob) {
- s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(s->pktout, s->username);
- ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
- ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
- ssh2_pkt_addbool(s->pktout, FALSE); /* no signature included */
- ssh2_pkt_addstring(s->pktout, algorithm);
- ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addstring_data(s->pktout, (char *)pub_blob,
- pub_blob_len);
- ssh2_pkt_send(ssh, s->pktout);
- logevent("Offered public key");
-
- crWaitUntilV(pktin);
- if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
- s->gotit = TRUE;
- s->type = AUTH_TYPE_PUBLICKEY_OFFER_LOUD;
- continue; /* key refused; give up on it */
- }
-
- logevent("Offer of public key accepted");
- /*
- * Actually attempt a serious authentication using
- * the key.
- */
- if (ssh2_userkey_encrypted(&ssh->cfg.keyfile, &comment)) {
- sprintf(s->pwprompt,
- "Passphrase for key \"%.100s\": ",
- comment);
- s->need_pw = TRUE;
- } else {
- s->need_pw = FALSE;
- }
- if (flags & FLAG_VERBOSE) {
- c_write_str(ssh, "Authenticating with public key \"");
- c_write_str(ssh, comment);
- c_write_str(ssh, "\"\r\n");
- }
- s->method = AUTH_PUBLICKEY_FILE;
- }
- }
-
- if (!s->method && s->can_keyb_inter && !s->kbd_inter_refused &&
- !s->kbd_inter_running) {
- s->method = AUTH_KEYBOARD_INTERACTIVE;
- s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
-
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh->pkt_ctx |= SSH2_PKTCTX_KBDINTER;
-
s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(s->pktout, s->username);
- ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
- ssh2_pkt_addstring(s->pktout, "keyboard-interactive"); /* method */
- ssh2_pkt_addstring(s->pktout, ""); /* lang */
- ssh2_pkt_addstring(s->pktout, "");
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
+ ssh2_pkt_addbool(s->pktout, FALSE);
+ /* no signature included */
+ ssh2_pkt_addstring(s->pktout, s->publickey_algorithm);
+ ssh2_pkt_addstring_start(s->pktout);
+ ssh2_pkt_addstring_data(s->pktout,
+ (char *)s->publickey_blob,
+ s->publickey_bloblen);
ssh2_pkt_send(ssh, s->pktout);
+ logevent("Offered public key");
crWaitUntilV(pktin);
- if (pktin->type != SSH2_MSG_USERAUTH_INFO_REQUEST) {
- if (pktin->type == SSH2_MSG_USERAUTH_FAILURE)
- s->gotit = TRUE;
- logevent("Keyboard-interactive authentication refused");
- s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET;
- s->kbd_inter_refused = TRUE; /* don't try it again */
- continue;
- }
-
- c_write_str(ssh, "Using keyboard-interactive authentication.\r\n");
- s->kbd_inter_running = TRUE;
- s->curr_prompt = 0;
- }
-
- if (s->kbd_inter_running) {
- s->method = AUTH_KEYBOARD_INTERACTIVE;
- s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
-
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh->pkt_ctx |= SSH2_PKTCTX_KBDINTER;
-
- if (s->curr_prompt == 0) {
- /*
- * We've got a fresh USERAUTH_INFO_REQUEST.
- * Display header data, and start going through
- * the prompts.
- */
- char *name, *inst, *lang;
- int name_len, inst_len, lang_len;
-
- ssh_pkt_getstring(pktin, &name, &name_len);
- ssh_pkt_getstring(pktin, &inst, &inst_len);
- ssh_pkt_getstring(pktin, &lang, &lang_len);
- if (name_len > 0) {
- c_write_untrusted(ssh, name, name_len);
- c_write_str(ssh, "\r\n");
- }
- if (inst_len > 0) {
- c_write_untrusted(ssh, inst, inst_len);
- c_write_str(ssh, "\r\n");
- }
- s->num_prompts = ssh_pkt_getuint32(pktin);
+ if (pktin->type != SSH2_MSG_USERAUTH_PK_OK) {
+ /* Key refused. Give up. */
+ s->gotit = TRUE; /* reconsider message next loop */
+ s->type = AUTH_TYPE_PUBLICKEY_OFFER_LOUD;
+ continue; /* process this new message */
}
+ logevent("Offer of public key accepted");
/*
- * If there are prompts remaining in the packet,
- * display one and get a response.
+ * Actually attempt a serious authentication using
+ * the key.
*/
- if (s->curr_prompt < s->num_prompts) {
- char *prompt;
- int prompt_len;
-
- ssh_pkt_getstring(pktin, &prompt, &prompt_len);
- if (prompt_len > 0) {
- static const char trunc[] = "<prompt truncated>: ";
- static const int prlen = sizeof(s->pwprompt) -
- lenof(trunc);
- if (prompt_len > prlen) {
- memcpy(s->pwprompt, prompt, prlen);
- strcpy(s->pwprompt + prlen, trunc);
- } else {
- memcpy(s->pwprompt, prompt, prompt_len);
- s->pwprompt[prompt_len] = '\0';
+ if (flags & FLAG_VERBOSE) {
+ c_write_str(ssh, "Authenticating with public key \"");
+ c_write_str(ssh, s->publickey_comment);
+ c_write_str(ssh, "\"\r\n");
+ }
+ key = NULL;
+ while (!key) {
+ const char *error; /* not live over crReturn */
+ if (s->publickey_encrypted) {
+ /*
+ * Get a passphrase from the user.
+ */
+ int ret; /* need not be kept over crReturn */
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = FALSE;
+ s->cur_prompt->name = dupstr("SSH key passphrase");
+ add_prompt(s->cur_prompt,
+ dupprintf("Passphrase for key \"%.100s\": ",
+ s->publickey_comment),
+ FALSE);
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntilV(!pktin);
+ ret = get_userpass_input(s->cur_prompt,
+ in, inlen);
+ ssh->send_ok = 0;
}
+ if (!ret) {
+ /* Failed to get a passphrase. Terminate. */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, NULL,
+ "Unable to authenticate",
+ SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER,
+ TRUE);
+ crStopV;
+ }
+ passphrase =
+ dupstr(s->cur_prompt->prompts[0]->result);
+ free_prompts(s->cur_prompt);
} else {
- strcpy(s->pwprompt,
- "<server failed to send prompt>: ");
+ passphrase = NULL; /* no passphrase needed */
}
- s->echo = ssh2_pkt_getbool(pktin);
- s->need_pw = TRUE;
- } else
- s->need_pw = FALSE;
- }
-
- if (!s->method && s->can_passwd) {
- s->method = AUTH_PASSWORD;
- ssh->pkt_ctx &= ~SSH2_PKTCTX_AUTH_MASK;
- ssh->pkt_ctx |= SSH2_PKTCTX_PASSWORD;
- sprintf(s->pwprompt, "%.90s@%.90s's password: ", s->username,
- ssh->savedhost);
- s->need_pw = TRUE;
- }
- if (s->need_pw) {
- if (ssh_get_line) {
- if (!ssh_get_line(s->pwprompt, s->password,
- sizeof(s->password), TRUE)) {
- /*
- * get_line failed to get a password (for
- * example because one was supplied on the
- * command line which has already failed to
- * work). Terminate.
- */
- ssh_disconnect(ssh, NULL, "Unable to authenticate",
- SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER,
- FALSE);
- crStopV;
+ /*
+ * Try decrypting the key.
+ */
+ s->keyfile = conf_get_filename(ssh->conf, CONF_keyfile);
+ key = ssh2_load_userkey(s->keyfile, passphrase, &error);
+ if (passphrase) {
+ /* burn the evidence */
+ smemclr(passphrase, strlen(passphrase));
+ sfree(passphrase);
+ }
+ if (key == SSH2_WRONG_PASSPHRASE || key == NULL) {
+ if (passphrase &&
+ (key == SSH2_WRONG_PASSPHRASE)) {
+ c_write_str(ssh, "Wrong passphrase\r\n");
+ key = NULL;
+ /* and loop again */
+ } else {
+ c_write_str(ssh, "Unable to load private key (");
+ c_write_str(ssh, error);
+ c_write_str(ssh, ")\r\n");
+ key = NULL;
+ break; /* try something else */
+ }
}
- } else {
- int ret; /* need not be saved across crReturn */
- c_write_untrusted(ssh, s->pwprompt, strlen(s->pwprompt));
- ssh->send_ok = 1;
-
- setup_userpass_input(ssh, s->password,
- sizeof(s->password), s->echo);
- do {
- crWaitUntilV(!pktin);
- ret = process_userpass_input(ssh, in, inlen);
- } while (ret == 0);
- if (ret < 0)
- cleanup_exit(0);
- c_write_str(ssh, "\r\n");
}
- }
- if (s->method == AUTH_PUBLICKEY_FILE) {
- /*
- * We have our passphrase. Now try the actual authentication.
- */
- struct ssh2_userkey *key;
- const char *error = NULL;
-
- key = ssh2_load_userkey(&ssh->cfg.keyfile, s->password,
- &error);
- if (key == SSH2_WRONG_PASSPHRASE || key == NULL) {
- if (key == SSH2_WRONG_PASSPHRASE) {
- c_write_str(ssh, "Wrong passphrase\r\n");
- s->tried_pubkey_config = FALSE;
- } else {
- c_write_str(ssh, "Unable to load private key (");
- c_write_str(ssh, error);
- c_write_str(ssh, ")\r\n");
- s->tried_pubkey_config = TRUE;
- }
- /* Send a spurious AUTH_NONE to return to the top. */
- s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(s->pktout, s->username);
- ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
- ssh2_pkt_addstring(s->pktout, "none"); /* method */
- ssh2_pkt_send(ssh, s->pktout);
- s->type = AUTH_TYPE_NONE;
- } else {
+ if (key) {
unsigned char *pkblob, *sigblob, *sigdata;
int pkblob_len, sigblob_len, sigdata_len;
- int p;
+ int p;
/*
* We have loaded the private key and the server
* Hallelujah. Generate a signature and send it.
*/
s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- ssh2_pkt_addstring(s->pktout, s->username);
- ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
- ssh2_pkt_addstring(s->pktout, "publickey"); /* method */
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "publickey");
+ /* method */
ssh2_pkt_addbool(s->pktout, TRUE);
+ /* signature follows */
ssh2_pkt_addstring(s->pktout, key->alg->name);
- pkblob = key->alg->public_blob(key->data, &pkblob_len);
+ pkblob = key->alg->public_blob(key->data,
+ &pkblob_len);
ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addstring_data(s->pktout, (char *)pkblob, pkblob_len);
+ ssh2_pkt_addstring_data(s->pktout, (char *)pkblob,
+ pkblob_len);
/*
* The data to be signed is:
*/
sigdata_len = s->pktout->length - 5 + 4 +
ssh->v2_session_id_len;
- if (ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)
- sigdata_len -= 4;
+ if (ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)
+ sigdata_len -= 4;
sigdata = snewn(sigdata_len, unsigned char);
- p = 0;
- if (!(ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)) {
- PUT_32BIT(sigdata+p, ssh->v2_session_id_len);
- p += 4;
- }
+ p = 0;
+ if (!(ssh->remote_bugs & BUG_SSH2_PK_SESSIONID)) {
+ PUT_32BIT(sigdata+p, ssh->v2_session_id_len);
+ p += 4;
+ }
memcpy(sigdata+p, ssh->v2_session_id,
ssh->v2_session_id_len);
p += ssh->v2_session_id_len;
memcpy(sigdata+p, s->pktout->data + 5,
s->pktout->length - 5);
- p += s->pktout->length - 5;
- assert(p == sigdata_len);
+ p += s->pktout->length - 5;
+ assert(p == sigdata_len);
sigblob = key->alg->sign(key->data, (char *)sigdata,
sigdata_len, &sigblob_len);
ssh2_add_sigblob(ssh, s->pktout, pkblob, pkblob_len,
sfree(sigdata);
ssh2_pkt_send(ssh, s->pktout);
+ logevent("Sent public key signature");
s->type = AUTH_TYPE_PUBLICKEY;
key->alg->freekey(key->data);
}
- } else if (s->method == AUTH_PASSWORD) {
+
+#ifndef NO_GSSAPI
+ } else if (s->can_gssapi && !s->tried_gssapi) {
+
+ /* GSSAPI Authentication */
+
+ int micoffset, len;
+ char *data;
+ Ssh_gss_buf mic;
+ s->type = AUTH_TYPE_GSSAPI;
+ s->tried_gssapi = TRUE;
+ s->gotit = TRUE;
+ ssh->pkt_actx = SSH2_PKTCTX_GSSAPI;
+
+ /*
+ * Pick the highest GSS library on the preference
+ * list.
+ */
+ {
+ int i, j;
+ s->gsslib = NULL;
+ for (i = 0; i < ngsslibs; i++) {
+ int want_id = conf_get_int_int(ssh->conf,
+ CONF_ssh_gsslist, i);
+ for (j = 0; j < ssh->gsslibs->nlibraries; j++)
+ if (ssh->gsslibs->libraries[j].id == want_id) {
+ s->gsslib = &ssh->gsslibs->libraries[j];
+ goto got_gsslib; /* double break */
+ }
+ }
+ got_gsslib:
+ /*
+ * We always expect to have found something in
+ * the above loop: we only came here if there
+ * was at least one viable GSS library, and the
+ * preference list should always mention
+ * everything and only change the order.
+ */
+ assert(s->gsslib);
+ }
+
+ if (s->gsslib->gsslogmsg)
+ logevent(s->gsslib->gsslogmsg);
+
+ /* Sending USERAUTH_REQUEST with "gssapi-with-mic" method */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ ssh2_pkt_addstring(s->pktout, "gssapi-with-mic");
+ logevent("Attempting GSSAPI authentication");
+
+ /* add mechanism info */
+ s->gsslib->indicate_mech(s->gsslib, &s->gss_buf);
+
+ /* number of GSSAPI mechanisms */
+ ssh2_pkt_adduint32(s->pktout,1);
+
+ /* length of OID + 2 */
+ ssh2_pkt_adduint32(s->pktout, s->gss_buf.length + 2);
+ ssh2_pkt_addbyte(s->pktout, SSH2_GSS_OIDTYPE);
+
+ /* length of OID */
+ ssh2_pkt_addbyte(s->pktout, (unsigned char) s->gss_buf.length);
+
+ ssh_pkt_adddata(s->pktout, s->gss_buf.value,
+ s->gss_buf.length);
+ ssh2_pkt_send(ssh, s->pktout);
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_USERAUTH_GSSAPI_RESPONSE) {
+ logevent("GSSAPI authentication request refused");
+ continue;
+ }
+
+ /* check returned packet ... */
+
+ ssh_pkt_getstring(pktin, &data, &len);
+ s->gss_rcvtok.value = data;
+ s->gss_rcvtok.length = len;
+ if (s->gss_rcvtok.length != s->gss_buf.length + 2 ||
+ ((char *)s->gss_rcvtok.value)[0] != SSH2_GSS_OIDTYPE ||
+ ((char *)s->gss_rcvtok.value)[1] != s->gss_buf.length ||
+ memcmp((char *)s->gss_rcvtok.value + 2,
+ s->gss_buf.value,s->gss_buf.length) ) {
+ logevent("GSSAPI authentication - wrong response from server");
+ continue;
+ }
+
+ /* now start running */
+ s->gss_stat = s->gsslib->import_name(s->gsslib,
+ ssh->fullhostname,
+ &s->gss_srv_name);
+ if (s->gss_stat != SSH_GSS_OK) {
+ if (s->gss_stat == SSH_GSS_BAD_HOST_NAME)
+ logevent("GSSAPI import name failed - Bad service name");
+ else
+ logevent("GSSAPI import name failed");
+ continue;
+ }
+
+ /* fetch TGT into GSS engine */
+ s->gss_stat = s->gsslib->acquire_cred(s->gsslib, &s->gss_ctx);
+
+ if (s->gss_stat != SSH_GSS_OK) {
+ logevent("GSSAPI authentication failed to get credentials");
+ s->gsslib->release_name(s->gsslib, &s->gss_srv_name);
+ continue;
+ }
+
+ /* initial tokens are empty */
+ SSH_GSS_CLEAR_BUF(&s->gss_rcvtok);
+ SSH_GSS_CLEAR_BUF(&s->gss_sndtok);
+
+ /* now enter the loop */
+ do {
+ s->gss_stat = s->gsslib->init_sec_context
+ (s->gsslib,
+ &s->gss_ctx,
+ s->gss_srv_name,
+ conf_get_int(ssh->conf, CONF_gssapifwd),
+ &s->gss_rcvtok,
+ &s->gss_sndtok);
+
+ if (s->gss_stat!=SSH_GSS_S_COMPLETE &&
+ s->gss_stat!=SSH_GSS_S_CONTINUE_NEEDED) {
+ logevent("GSSAPI authentication initialisation failed");
+
+ if (s->gsslib->display_status(s->gsslib, s->gss_ctx,
+ &s->gss_buf) == SSH_GSS_OK) {
+ logevent(s->gss_buf.value);
+ sfree(s->gss_buf.value);
+ }
+
+ break;
+ }
+ logevent("GSSAPI authentication initialised");
+
+ /* Client and server now exchange tokens until GSSAPI
+ * no longer says CONTINUE_NEEDED */
+
+ if (s->gss_sndtok.length != 0) {
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_GSSAPI_TOKEN);
+ ssh_pkt_addstring_start(s->pktout);
+ ssh_pkt_addstring_data(s->pktout,s->gss_sndtok.value,s->gss_sndtok.length);
+ ssh2_pkt_send(ssh, s->pktout);
+ s->gsslib->free_tok(s->gsslib, &s->gss_sndtok);
+ }
+
+ if (s->gss_stat == SSH_GSS_S_CONTINUE_NEEDED) {
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_USERAUTH_GSSAPI_TOKEN) {
+ logevent("GSSAPI authentication - bad server response");
+ s->gss_stat = SSH_GSS_FAILURE;
+ break;
+ }
+ ssh_pkt_getstring(pktin, &data, &len);
+ s->gss_rcvtok.value = data;
+ s->gss_rcvtok.length = len;
+ }
+ } while (s-> gss_stat == SSH_GSS_S_CONTINUE_NEEDED);
+
+ if (s->gss_stat != SSH_GSS_OK) {
+ s->gsslib->release_name(s->gsslib, &s->gss_srv_name);
+ s->gsslib->release_cred(s->gsslib, &s->gss_ctx);
+ continue;
+ }
+ logevent("GSSAPI authentication loop finished OK");
+
+ /* Now send the MIC */
+
+ s->pktout = ssh2_pkt_init(0);
+ micoffset = s->pktout->length;
+ ssh_pkt_addstring_start(s->pktout);
+ ssh_pkt_addstring_data(s->pktout, (char *)ssh->v2_session_id, ssh->v2_session_id_len);
+ ssh_pkt_addbyte(s->pktout, SSH2_MSG_USERAUTH_REQUEST);
+ ssh_pkt_addstring(s->pktout, ssh->username);
+ ssh_pkt_addstring(s->pktout, "ssh-connection");
+ ssh_pkt_addstring(s->pktout, "gssapi-with-mic");
+
+ s->gss_buf.value = (char *)s->pktout->data + micoffset;
+ s->gss_buf.length = s->pktout->length - micoffset;
+
+ s->gsslib->get_mic(s->gsslib, s->gss_ctx, &s->gss_buf, &mic);
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_GSSAPI_MIC);
+ ssh_pkt_addstring_start(s->pktout);
+ ssh_pkt_addstring_data(s->pktout, mic.value, mic.length);
+ ssh2_pkt_send(ssh, s->pktout);
+ s->gsslib->free_mic(s->gsslib, &mic);
+
+ s->gotit = FALSE;
+
+ s->gsslib->release_name(s->gsslib, &s->gss_srv_name);
+ s->gsslib->release_cred(s->gsslib, &s->gss_ctx);
+ continue;
+#endif
+ } else if (s->can_keyb_inter && !s->kbd_inter_refused) {
+
+ /*
+ * Keyboard-interactive authentication.
+ */
+
+ s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
+
+ ssh->pkt_actx = SSH2_PKTCTX_KBDINTER;
+
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "keyboard-interactive");
+ /* method */
+ ssh2_pkt_addstring(s->pktout, ""); /* lang */
+ ssh2_pkt_addstring(s->pktout, ""); /* submethods */
+ ssh2_pkt_send(ssh, s->pktout);
+
+ logevent("Attempting keyboard-interactive authentication");
+
+ crWaitUntilV(pktin);
+ if (pktin->type != SSH2_MSG_USERAUTH_INFO_REQUEST) {
+ /* Server is not willing to do keyboard-interactive
+ * at all (or, bizarrely but legally, accepts the
+ * user without actually issuing any prompts).
+ * Give up on it entirely. */
+ s->gotit = TRUE;
+ s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET;
+ s->kbd_inter_refused = TRUE; /* don't try it again */
+ continue;
+ }
+
+ /*
+ * Loop while the server continues to send INFO_REQUESTs.
+ */
+ while (pktin->type == SSH2_MSG_USERAUTH_INFO_REQUEST) {
+
+ char *name, *inst, *lang;
+ int name_len, inst_len, lang_len;
+ int i;
+
+ /*
+ * We've got a fresh USERAUTH_INFO_REQUEST.
+ * Get the preamble and start building a prompt.
+ */
+ ssh_pkt_getstring(pktin, &name, &name_len);
+ ssh_pkt_getstring(pktin, &inst, &inst_len);
+ ssh_pkt_getstring(pktin, &lang, &lang_len);
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = TRUE;
+
+ /*
+ * Get any prompt(s) from the packet.
+ */
+ s->num_prompts = ssh_pkt_getuint32(pktin);
+ for (i = 0; i < s->num_prompts; i++) {
+ char *prompt;
+ int prompt_len;
+ int echo;
+ static char noprompt[] =
+ "<server failed to send prompt>: ";
+
+ ssh_pkt_getstring(pktin, &prompt, &prompt_len);
+ echo = ssh2_pkt_getbool(pktin);
+ if (!prompt_len) {
+ prompt = noprompt;
+ prompt_len = lenof(noprompt)-1;
+ }
+ add_prompt(s->cur_prompt,
+ dupprintf("%.*s", prompt_len, prompt),
+ echo);
+ }
+
+ if (name_len) {
+ /* FIXME: better prefix to distinguish from
+ * local prompts? */
+ s->cur_prompt->name =
+ dupprintf("SSH server: %.*s", name_len, name);
+ s->cur_prompt->name_reqd = TRUE;
+ } else {
+ s->cur_prompt->name =
+ dupstr("SSH server authentication");
+ s->cur_prompt->name_reqd = FALSE;
+ }
+ /* We add a prefix to try to make it clear that a prompt
+ * has come from the server.
+ * FIXME: ugly to print "Using..." in prompt _every_
+ * time round. Can this be done more subtly? */
+ /* Special case: for reasons best known to themselves,
+ * some servers send k-i requests with no prompts and
+ * nothing to display. Keep quiet in this case. */
+ if (s->num_prompts || name_len || inst_len) {
+ s->cur_prompt->instruction =
+ dupprintf("Using keyboard-interactive authentication.%s%.*s",
+ inst_len ? "\n" : "", inst_len, inst);
+ s->cur_prompt->instr_reqd = TRUE;
+ } else {
+ s->cur_prompt->instr_reqd = FALSE;
+ }
+
+ /*
+ * Display any instructions, and get the user's
+ * response(s).
+ */
+ {
+ int ret; /* not live over crReturn */
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntilV(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
+ }
+ if (!ret) {
+ /*
+ * Failed to get responses. Terminate.
+ */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, NULL, "Unable to authenticate",
+ SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER,
+ TRUE);
+ crStopV;
+ }
+ }
+
+ /*
+ * Send the response(s) to the server.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_INFO_RESPONSE);
+ ssh2_pkt_adduint32(s->pktout, s->num_prompts);
+ for (i=0; i < s->num_prompts; i++) {
+ dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
+ ssh2_pkt_addstring(s->pktout,
+ s->cur_prompt->prompts[i]->result);
+ end_log_omission(ssh, s->pktout);
+ }
+ ssh2_pkt_send_with_padding(ssh, s->pktout, 256);
+
+ /*
+ * Free the prompts structure from this iteration.
+ * If there's another, a new one will be allocated
+ * when we return to the top of this while loop.
+ */
+ free_prompts(s->cur_prompt);
+
+ /*
+ * Get the next packet in case it's another
+ * INFO_REQUEST.
+ */
+ crWaitUntilV(pktin);
+
+ }
+
+ /*
+ * We should have SUCCESS or FAILURE now.
+ */
+ s->gotit = TRUE;
+
+ } else if (s->can_passwd) {
+
+ /*
+ * Plain old password authentication.
+ */
+ int ret; /* not live over crReturn */
+ int changereq_first_time; /* not live over crReturn */
+
+ ssh->pkt_actx = SSH2_PKTCTX_PASSWORD;
+
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("SSH password");
+ add_prompt(s->cur_prompt, dupprintf("%s@%s's password: ",
+ ssh->username,
+ ssh->savedhost),
+ FALSE);
+
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntilV(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
+ }
+ if (!ret) {
+ /*
+ * Failed to get responses. Terminate.
+ */
+ free_prompts(s->cur_prompt);
+ ssh_disconnect(ssh, NULL, "Unable to authenticate",
+ SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER,
+ TRUE);
+ crStopV;
+ }
/*
+ * Squirrel away the password. (We may need it later if
+ * asked to change it.)
+ */
+ s->password = dupstr(s->cur_prompt->prompts[0]->result);
+ free_prompts(s->cur_prompt);
+
+ /*
+ * Send the password packet.
+ *
* We pad out the password packet to 256 bytes to make
* it harder for an attacker to find the length of the
* user's password.
* people who find out how long their password is!
*/
s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
- s->pktout->forcepad = 256;
- ssh2_pkt_addstring(s->pktout, s->username);
- ssh2_pkt_addstring(s->pktout, "ssh-connection"); /* service requested */
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
ssh2_pkt_addstring(s->pktout, "password");
ssh2_pkt_addbool(s->pktout, FALSE);
dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
ssh2_pkt_addstring(s->pktout, s->password);
- memset(s->password, 0, sizeof(s->password));
end_log_omission(ssh, s->pktout);
- ssh2_pkt_send(ssh, s->pktout);
+ ssh2_pkt_send_with_padding(ssh, s->pktout, 256);
logevent("Sent password");
s->type = AUTH_TYPE_PASSWORD;
- } else if (s->method == AUTH_KEYBOARD_INTERACTIVE) {
- if (s->curr_prompt == 0) {
- s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_INFO_RESPONSE);
- s->pktout->forcepad = 256;
- ssh2_pkt_adduint32(s->pktout, s->num_prompts);
- }
- if (s->need_pw) { /* only add pw if we just got one! */
+
+ /*
+ * Wait for next packet, in case it's a password change
+ * request.
+ */
+ crWaitUntilV(pktin);
+ changereq_first_time = TRUE;
+
+ while (pktin->type == SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ) {
+
+ /*
+ * We're being asked for a new password
+ * (perhaps not for the first time).
+ * Loop until the server accepts it.
+ */
+
+ int got_new = FALSE; /* not live over crReturn */
+ char *prompt; /* not live over crReturn */
+ int prompt_len; /* not live over crReturn */
+
+ {
+ char *msg;
+ if (changereq_first_time)
+ msg = "Server requested password change";
+ else
+ msg = "Server rejected new password";
+ logevent(msg);
+ c_write_str(ssh, msg);
+ c_write_str(ssh, "\r\n");
+ }
+
+ ssh_pkt_getstring(pktin, &prompt, &prompt_len);
+
+ s->cur_prompt = new_prompts(ssh->frontend);
+ s->cur_prompt->to_server = TRUE;
+ s->cur_prompt->name = dupstr("New SSH password");
+ s->cur_prompt->instruction =
+ dupprintf("%.*s", prompt_len, prompt);
+ s->cur_prompt->instr_reqd = TRUE;
+ /*
+ * There's no explicit requirement in the protocol
+ * for the "old" passwords in the original and
+ * password-change messages to be the same, and
+ * apparently some Cisco kit supports password change
+ * by the user entering a blank password originally
+ * and the real password subsequently, so,
+ * reluctantly, we prompt for the old password again.
+ *
+ * (On the other hand, some servers don't even bother
+ * to check this field.)
+ */
+ add_prompt(s->cur_prompt,
+ dupstr("Current password (blank for previously entered password): "),
+ FALSE);
+ add_prompt(s->cur_prompt, dupstr("Enter new password: "),
+ FALSE);
+ add_prompt(s->cur_prompt, dupstr("Confirm new password: "),
+ FALSE);
+
+ /*
+ * Loop until the user manages to enter the same
+ * password twice.
+ */
+ while (!got_new) {
+
+ ret = get_userpass_input(s->cur_prompt, NULL, 0);
+ while (ret < 0) {
+ ssh->send_ok = 1;
+ crWaitUntilV(!pktin);
+ ret = get_userpass_input(s->cur_prompt, in, inlen);
+ ssh->send_ok = 0;
+ }
+ if (!ret) {
+ /*
+ * Failed to get responses. Terminate.
+ */
+ /* burn the evidence */
+ free_prompts(s->cur_prompt);
+ smemclr(s->password, strlen(s->password));
+ sfree(s->password);
+ ssh_disconnect(ssh, NULL, "Unable to authenticate",
+ SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER,
+ TRUE);
+ crStopV;
+ }
+
+ /*
+ * If the user specified a new original password
+ * (IYSWIM), overwrite any previously specified
+ * one.
+ * (A side effect is that the user doesn't have to
+ * re-enter it if they louse up the new password.)
+ */
+ if (s->cur_prompt->prompts[0]->result[0]) {
+ smemclr(s->password, strlen(s->password));
+ /* burn the evidence */
+ sfree(s->password);
+ s->password =
+ dupstr(s->cur_prompt->prompts[0]->result);
+ }
+
+ /*
+ * Check the two new passwords match.
+ */
+ got_new = (strcmp(s->cur_prompt->prompts[1]->result,
+ s->cur_prompt->prompts[2]->result)
+ == 0);
+ if (!got_new)
+ /* They don't. Silly user. */
+ c_write_str(ssh, "Passwords do not match\r\n");
+
+ }
+
+ /*
+ * Send the new password (along with the old one).
+ * (see above for padding rationale)
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_USERAUTH_REQUEST);
+ ssh2_pkt_addstring(s->pktout, ssh->username);
+ ssh2_pkt_addstring(s->pktout, "ssh-connection");
+ /* service requested */
+ ssh2_pkt_addstring(s->pktout, "password");
+ ssh2_pkt_addbool(s->pktout, TRUE);
dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
ssh2_pkt_addstring(s->pktout, s->password);
- memset(s->password, 0, sizeof(s->password));
+ ssh2_pkt_addstring(s->pktout,
+ s->cur_prompt->prompts[1]->result);
+ free_prompts(s->cur_prompt);
end_log_omission(ssh, s->pktout);
- s->curr_prompt++;
- }
- if (s->curr_prompt >= s->num_prompts) {
- ssh2_pkt_send(ssh, s->pktout);
- } else {
+ ssh2_pkt_send_with_padding(ssh, s->pktout, 256);
+ logevent("Sent new password");
+
/*
- * If there are prompts remaining, we set
- * `gotit' so that we won't attempt to get
- * another packet. Then we go back round the
- * loop and will end up retrieving another
- * prompt out of the existing packet. Funky or
- * what?
+ * Now see what the server has to say about it.
+ * (If it's CHANGEREQ again, it's not happy with the
+ * new password.)
*/
- s->gotit = TRUE;
+ crWaitUntilV(pktin);
+ changereq_first_time = FALSE;
+
}
- s->type = AUTH_TYPE_KEYBOARD_INTERACTIVE;
+
+ /*
+ * We need to reexamine the current pktin at the top
+ * of the loop. Either:
+ * - we weren't asked to change password at all, in
+ * which case it's a SUCCESS or FAILURE with the
+ * usual meaning
+ * - we sent a new password, and the server was
+ * either OK with it (SUCCESS or FAILURE w/partial
+ * success) or unhappy with the _old_ password
+ * (FAILURE w/o partial success)
+ * In any of these cases, we go back to the top of
+ * the loop and start again.
+ */
+ s->gotit = TRUE;
+
+ /*
+ * We don't need the old password any more, in any
+ * case. Burn the evidence.
+ */
+ smemclr(s->password, strlen(s->password));
+ sfree(s->password);
+
} else {
- ssh_disconnect(ssh, NULL,
+ char *str = dupprintf("No supported authentication methods available"
+ " (server sent: %.*s)",
+ methlen, methods);
+
+ ssh_disconnect(ssh, str,
"No supported authentication methods available",
SSH2_DISCONNECT_NO_MORE_AUTH_METHODS_AVAILABLE,
FALSE);
+ sfree(str);
+
crStopV;
+
}
+
}
}
ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] = NULL;
+ /* Clear up various bits and pieces from authentication. */
+ if (s->publickey_blob) {
+ sfree(s->publickey_blob);
+ sfree(s->publickey_comment);
+ }
+ if (s->agent_response)
+ sfree(s->agent_response);
+
+ if (s->userauth_success) {
+ /*
+ * We've just received USERAUTH_SUCCESS, and we haven't sent any
+ * packets since. Signal the transport layer to consider enacting
+ * delayed compression.
+ *
+ * (Relying on we_are_in is not sufficient, as
+ * draft-miller-secsh-compression-delayed is quite clear that it
+ * triggers on USERAUTH_SUCCESS specifically, and we_are_in can
+ * become set for other reasons.)
+ */
+ do_ssh2_transport(ssh, "enabling delayed compression", -2, NULL);
+ }
+
/*
* Now the connection protocol has started, one way or another.
*/
/*
* Create the main session channel.
*/
- if (!ssh->cfg.ssh_no_shell) {
+ if (conf_get_int(ssh->conf, CONF_ssh_no_shell)) {
+ ssh->mainchan = NULL;
+ } else {
ssh->mainchan = snew(struct ssh_channel);
ssh->mainchan->ssh = ssh;
- ssh->mainchan->localid = alloc_channel_id(ssh);
- s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN);
- ssh2_pkt_addstring(s->pktout, "session");
- ssh2_pkt_adduint32(s->pktout, ssh->mainchan->localid);
- ssh->mainchan->v.v2.locwindow = OUR_V2_WINSIZE;
- ssh2_pkt_adduint32(s->pktout, ssh->mainchan->v.v2.locwindow);/* our window size */
- ssh2_pkt_adduint32(s->pktout, OUR_V2_MAXPKT); /* our max pkt size */
- ssh2_pkt_send(ssh, s->pktout);
+ ssh2_channel_init(ssh->mainchan);
+
+ if (*conf_get_str(ssh->conf, CONF_ssh_nc_host)) {
+ /*
+ * Just start a direct-tcpip channel and use it as the main
+ * channel.
+ */
+ ssh_send_port_open(ssh->mainchan,
+ conf_get_str(ssh->conf, CONF_ssh_nc_host),
+ conf_get_int(ssh->conf, CONF_ssh_nc_port),
+ "main channel");
+ ssh->ncmode = TRUE;
+ } else {
+ s->pktout = ssh2_chanopen_init(ssh->mainchan, "session");
+ logevent("Opening session as main channel");
+ ssh2_pkt_send(ssh, s->pktout);
+ ssh->ncmode = FALSE;
+ }
crWaitUntilV(pktin);
if (pktin->type != SSH2_MSG_CHANNEL_OPEN_CONFIRMATION) {
- bombout(("Server refused to open a session"));
+ bombout(("Server refused to open channel"));
crStopV;
/* FIXME: error data comes back in FAILURE packet */
}
ssh->mainchan->remoteid = ssh_pkt_getuint32(pktin);
ssh->mainchan->halfopen = FALSE;
ssh->mainchan->type = CHAN_MAINSESSION;
- ssh->mainchan->closes = 0;
ssh->mainchan->v.v2.remwindow = ssh_pkt_getuint32(pktin);
ssh->mainchan->v.v2.remmaxpkt = ssh_pkt_getuint32(pktin);
- bufchain_init(&ssh->mainchan->v.v2.outbuffer);
add234(ssh->channels, ssh->mainchan);
update_specials_menu(ssh->frontend);
- logevent("Opened channel for session");
- } else
- ssh->mainchan = NULL;
+ logevent("Opened main channel");
+ }
/*
* Now we have a channel, make dispatch table entries for
ssh2_msg_channel_request;
ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN] =
ssh2_msg_channel_open;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_SUCCESS] = ssh2_msg_channel_response;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_FAILURE] = ssh2_msg_channel_response;
- /*
- * Potentially enable X11 forwarding.
- */
- if (ssh->mainchan && ssh->cfg.x11_forward) {
- char proto[20], data[64];
- logevent("Requesting X11 forwarding");
- ssh->x11auth = x11_invent_auth(proto, sizeof(proto),
- data, sizeof(data), ssh->cfg.x11_auth);
- x11_get_real_auth(ssh->x11auth, ssh->cfg.x11_display);
- s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid);
- ssh2_pkt_addstring(s->pktout, "x11-req");
- ssh2_pkt_addbool(s->pktout, 1); /* want reply */
- ssh2_pkt_addbool(s->pktout, 0); /* many connections */
- ssh2_pkt_addstring(s->pktout, proto);
+
+ if (ssh->mainchan && conf_get_int(ssh->conf, CONF_ssh_simple)) {
/*
- * Note that while we blank the X authentication data here, we don't
- * take any special action to blank the start of an X11 channel,
- * so using MIT-MAGIC-COOKIE-1 and actually opening an X connection
- * without having session blanking enabled is likely to leak your
- * cookie into the log.
+ * This message indicates to the server that we promise
+ * not to try to run any other channel in parallel with
+ * this one, so it's safe for it to advertise a very large
+ * window and leave the flow control to TCP.
*/
- dont_log_password(ssh, s->pktout, PKTLOG_BLANK);
- ssh2_pkt_addstring(s->pktout, data);
- end_log_omission(ssh, s->pktout);
- ssh2_pkt_adduint32(s->pktout, x11_get_screen_number(ssh->cfg.x11_display));
+ s->pktout = ssh2_chanreq_init(ssh->mainchan,
+ "simple@putty.projects.tartarus.org",
+ NULL, NULL);
ssh2_pkt_send(ssh, s->pktout);
-
- crWaitUntilV(pktin);
-
- if (pktin->type != SSH2_MSG_CHANNEL_SUCCESS) {
- if (pktin->type != SSH2_MSG_CHANNEL_FAILURE) {
- bombout(("Unexpected response to X11 forwarding request:"
- " packet type %d", pktin->type));
- crStopV;
- }
- logevent("X11 forwarding refused");
- } else {
- logevent("X11 forwarding enabled");
- ssh->X11_fwd_enabled = TRUE;
- }
}
/*
* Enable port forwardings.
*/
- ssh_setup_portfwd(ssh, &ssh->cfg);
+ ssh_setup_portfwd(ssh, ssh->conf);
- /*
- * Potentially enable agent forwarding.
- */
- if (ssh->mainchan && ssh->cfg.agentfwd && agent_exists()) {
- logevent("Requesting OpenSSH-style agent forwarding");
- s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid);
- ssh2_pkt_addstring(s->pktout, "auth-agent-req@openssh.com");
- ssh2_pkt_addbool(s->pktout, 1); /* want reply */
- ssh2_pkt_send(ssh, s->pktout);
+ if (ssh->mainchan && !ssh->ncmode) {
+ /*
+ * Send the CHANNEL_REQUESTS for the main session channel.
+ * Each one is handled by its own little asynchronous
+ * co-routine.
+ */
- crWaitUntilV(pktin);
+ /* Potentially enable X11 forwarding. */
+ if (conf_get_int(ssh->conf, CONF_x11_forward) &&
+ (ssh->x11disp =
+ x11_setup_display(conf_get_str(ssh->conf, CONF_x11_display),
+ conf_get_int(ssh->conf, CONF_x11_auth),
+ ssh->conf)))
+ ssh2_setup_x11(ssh->mainchan, NULL, NULL);
- if (pktin->type != SSH2_MSG_CHANNEL_SUCCESS) {
- if (pktin->type != SSH2_MSG_CHANNEL_FAILURE) {
- bombout(("Unexpected response to agent forwarding request:"
- " packet type %d", pktin->type));
- crStopV;
- }
- logevent("Agent forwarding refused");
- } else {
- logevent("Agent forwarding enabled");
- ssh->agentfwd_enabled = TRUE;
- }
- }
+ /* Potentially enable agent forwarding. */
+ if (conf_get_int(ssh->conf, CONF_agentfwd) && agent_exists())
+ ssh2_setup_agent(ssh->mainchan, NULL, NULL);
- /*
- * Now allocate a pty for the session.
- */
- if (ssh->mainchan && !ssh->cfg.nopty) {
- /* Unpick the terminal-speed string. */
- /* XXX perhaps we should allow no speeds to be sent. */
- ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
- sscanf(ssh->cfg.termspeed, "%d,%d", &ssh->ospeed, &ssh->ispeed);
- /* Build the pty request. */
- s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid); /* recipient channel */
- ssh2_pkt_addstring(s->pktout, "pty-req");
- ssh2_pkt_addbool(s->pktout, 1); /* want reply */
- ssh2_pkt_addstring(s->pktout, ssh->cfg.termtype);
- ssh2_pkt_adduint32(s->pktout, ssh->term_width);
- ssh2_pkt_adduint32(s->pktout, ssh->term_height);
- ssh2_pkt_adduint32(s->pktout, 0); /* pixel width */
- ssh2_pkt_adduint32(s->pktout, 0); /* pixel height */
- ssh2_pkt_addstring_start(s->pktout);
- parse_ttymodes(ssh, ssh->cfg.ttymodes,
- ssh2_send_ttymode, (void *)s->pktout);
- ssh2_pkt_addbyte(s->pktout, SSH2_TTY_OP_ISPEED);
- ssh2_pkt_adduint32(s->pktout, ssh->ispeed);
- ssh2_pkt_addbyte(s->pktout, SSH2_TTY_OP_OSPEED);
- ssh2_pkt_adduint32(s->pktout, ssh->ospeed);
- ssh2_pkt_addstring_data(s->pktout, "\0", 1); /* TTY_OP_END */
- ssh2_pkt_send(ssh, s->pktout);
- ssh->state = SSH_STATE_INTERMED;
+ /* Now allocate a pty for the session. */
+ if (!conf_get_int(ssh->conf, CONF_nopty))
+ ssh2_setup_pty(ssh->mainchan, NULL, NULL);
- crWaitUntilV(pktin);
+ /* Send environment variables. */
+ ssh2_setup_env(ssh->mainchan, NULL, NULL);
- if (pktin->type != SSH2_MSG_CHANNEL_SUCCESS) {
- if (pktin->type != SSH2_MSG_CHANNEL_FAILURE) {
- bombout(("Unexpected response to pty request:"
- " packet type %d", pktin->type));
- crStopV;
+ /*
+ * Start a shell or a remote command. We may have to attempt
+ * this twice if the config data has provided a second choice
+ * of command.
+ */
+ while (1) {
+ int subsys;
+ char *cmd;
+
+ if (ssh->fallback_cmd) {
+ subsys = conf_get_int(ssh->conf, CONF_ssh_subsys2);
+ cmd = conf_get_str(ssh->conf, CONF_remote_cmd2);
+ } else {
+ subsys = conf_get_int(ssh->conf, CONF_ssh_subsys);
+ cmd = conf_get_str(ssh->conf, CONF_remote_cmd);
}
- c_write_str(ssh, "Server refused to allocate pty\r\n");
- ssh->editing = ssh->echoing = 1;
- } else {
- logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
- ssh->ospeed, ssh->ispeed);
- }
- } else {
- ssh->editing = ssh->echoing = 1;
- }
- /*
- * Send environment variables.
- *
- * Simplest thing here is to send all the requests at once, and
- * then wait for a whole bunch of successes or failures.
- */
- if (ssh->mainchan && *ssh->cfg.environmt) {
- char *e = ssh->cfg.environmt;
- char *var, *varend, *val;
-
- s->num_env = 0;
-
- while (*e) {
- var = e;
- while (*e && *e != '\t') e++;
- varend = e;
- if (*e == '\t') e++;
- val = e;
- while (*e) e++;
- e++;
-
- s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid);
- ssh2_pkt_addstring(s->pktout, "env");
- ssh2_pkt_addbool(s->pktout, 1); /* want reply */
- ssh2_pkt_addstring_start(s->pktout);
- ssh2_pkt_addstring_data(s->pktout, var, varend-var);
- ssh2_pkt_addstring(s->pktout, val);
+ if (subsys) {
+ s->pktout = ssh2_chanreq_init(ssh->mainchan, "subsystem",
+ ssh2_response_authconn, NULL);
+ ssh2_pkt_addstring(s->pktout, cmd);
+ } else if (*cmd) {
+ s->pktout = ssh2_chanreq_init(ssh->mainchan, "exec",
+ ssh2_response_authconn, NULL);
+ ssh2_pkt_addstring(s->pktout, cmd);
+ } else {
+ s->pktout = ssh2_chanreq_init(ssh->mainchan, "shell",
+ ssh2_response_authconn, NULL);
+ }
ssh2_pkt_send(ssh, s->pktout);
- s->num_env++;
- }
-
- logeventf(ssh, "Sent %d environment variables", s->num_env);
-
- s->env_ok = 0;
- s->env_left = s->num_env;
-
- while (s->env_left > 0) {
crWaitUntilV(pktin);
if (pktin->type != SSH2_MSG_CHANNEL_SUCCESS) {
if (pktin->type != SSH2_MSG_CHANNEL_FAILURE) {
- bombout(("Unexpected response to environment request:"
+ bombout(("Unexpected response to shell/command request:"
" packet type %d", pktin->type));
crStopV;
}
- } else {
- s->env_ok++;
- }
-
- s->env_left--;
- }
-
- if (s->env_ok == s->num_env) {
- logevent("All environment variables successfully set");
- } else if (s->env_ok == 0) {
- logevent("All environment variables refused");
- c_write_str(ssh, "Server refused to set environment variables\r\n");
- } else {
- logeventf(ssh, "%d environment variables refused",
- s->num_env - s->env_ok);
- c_write_str(ssh, "Server refused to set all environment variables\r\n");
- }
- }
-
- /*
- * Start a shell or a remote command. We may have to attempt
- * this twice if the config data has provided a second choice
- * of command.
- */
- if (ssh->mainchan) while (1) {
- int subsys;
- char *cmd;
-
- if (ssh->fallback_cmd) {
- subsys = ssh->cfg.ssh_subsys2;
- cmd = ssh->cfg.remote_cmd_ptr2;
- } else {
- subsys = ssh->cfg.ssh_subsys;
- cmd = ssh->cfg.remote_cmd_ptr;
- if (!cmd) cmd = ssh->cfg.remote_cmd;
- }
-
- s->pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(s->pktout, ssh->mainchan->remoteid); /* recipient channel */
- if (subsys) {
- ssh2_pkt_addstring(s->pktout, "subsystem");
- ssh2_pkt_addbool(s->pktout, 1); /* want reply */
- ssh2_pkt_addstring(s->pktout, cmd);
- } else if (*cmd) {
- ssh2_pkt_addstring(s->pktout, "exec");
- ssh2_pkt_addbool(s->pktout, 1); /* want reply */
- ssh2_pkt_addstring(s->pktout, cmd);
- } else {
- ssh2_pkt_addstring(s->pktout, "shell");
- ssh2_pkt_addbool(s->pktout, 1); /* want reply */
- }
- ssh2_pkt_send(ssh, s->pktout);
-
- crWaitUntilV(pktin);
-
- if (pktin->type != SSH2_MSG_CHANNEL_SUCCESS) {
- if (pktin->type != SSH2_MSG_CHANNEL_FAILURE) {
- bombout(("Unexpected response to shell/command request:"
- " packet type %d", pktin->type));
+ /*
+ * We failed to start the command. If this is the
+ * fallback command, we really are finished; if it's
+ * not, and if the fallback command exists, try falling
+ * back to it before complaining.
+ */
+ if (!ssh->fallback_cmd &&
+ *conf_get_str(ssh->conf, CONF_remote_cmd2)) {
+ logevent("Primary command failed; attempting fallback");
+ ssh->fallback_cmd = TRUE;
+ continue;
+ }
+ bombout(("Server refused to start a shell/command"));
crStopV;
+ } else {
+ logevent("Started a shell/command");
}
- /*
- * We failed to start the command. If this is the
- * fallback command, we really are finished; if it's
- * not, and if the fallback command exists, try falling
- * back to it before complaining.
- */
- if (!ssh->fallback_cmd && ssh->cfg.remote_cmd_ptr2 != NULL) {
- logevent("Primary command failed; attempting fallback");
- ssh->fallback_cmd = TRUE;
- continue;
- }
- bombout(("Server refused to start a shell/command"));
- crStopV;
- } else {
- logevent("Started a shell/command");
+ break;
}
- break;
+ } else {
+ ssh->editing = ssh->echoing = TRUE;
}
ssh->state = SSH_STATE_SESSION;
* Try to send data on all channels if we can.
*/
for (i = 0; NULL != (c = index234(ssh->channels, i)); i++)
- ssh2_try_send_and_unthrottle(c);
+ ssh2_try_send_and_unthrottle(ssh, c);
}
}
{
/* log reason code in disconnect message */
char *buf, *msg;
- int nowlen, reason, msglen;
+ int reason, msglen;
reason = ssh_pkt_getuint32(pktin);
ssh_pkt_getstring(pktin, &msg, &msglen);
}
logevent(buf);
sfree(buf);
- buf = dupprintf("Disconnection message text: %n%.*s",
- &nowlen, msglen, msg);
+ buf = dupprintf("Disconnection message text: %.*s",
+ msglen, msg);
logevent(buf);
- bombout(("Server sent disconnect message\ntype %d (%s):\n\"%s\"",
+ bombout(("Server sent disconnect message\ntype %d (%s):\n\"%.*s\"",
reason,
(reason > 0 && reason < lenof(ssh2_disconnect_reasons)) ?
ssh2_disconnect_reasons[reason] : "unknown",
- buf+nowlen));
+ msglen, msg));
sfree(buf);
}
/* log the debug message */
char *msg;
int msglen;
- int always_display;
- /* XXX maybe we should actually take notice of this */
- always_display = ssh2_pkt_getbool(pktin);
+ /* XXX maybe we should actually take notice of the return value */
+ ssh2_pkt_getbool(pktin);
ssh_pkt_getstring(pktin, &msg, &msglen);
logeventf(ssh, "Remote debug message: %.*s", msglen, msg);
}
+static void ssh2_msg_transport(Ssh ssh, struct Packet *pktin)
+{
+ do_ssh2_transport(ssh, NULL, 0, pktin);
+}
+
+/*
+ * Called if we receive a packet that isn't allowed by the protocol.
+ * This only applies to packets whose meaning PuTTY understands.
+ * Entirely unknown packets are handled below.
+ */
+static void ssh2_msg_unexpected(Ssh ssh, struct Packet *pktin)
+{
+ char *buf = dupprintf("Server protocol violation: unexpected %s packet",
+ ssh2_pkt_type(ssh->pkt_kctx, ssh->pkt_actx,
+ pktin->type));
+ ssh_disconnect(ssh, NULL, buf, SSH2_DISCONNECT_PROTOCOL_ERROR, FALSE);
+ sfree(buf);
+}
+
static void ssh2_msg_something_unimplemented(Ssh ssh, struct Packet *pktin)
{
struct Packet *pktout;
ssh->packet_dispatch[i] = ssh2_msg_something_unimplemented;
/*
- * Any message we actually understand, we set to NULL so that
- * the coroutines will get it.
+ * Initially, we only accept transport messages (and a few generic
+ * ones). do_ssh2_authconn will add more when it starts.
+ * Messages that are understood but not currently acceptable go to
+ * ssh2_msg_unexpected.
*/
- ssh->packet_dispatch[SSH2_MSG_UNIMPLEMENTED] = NULL;
- ssh->packet_dispatch[SSH2_MSG_SERVICE_REQUEST] = NULL;
- ssh->packet_dispatch[SSH2_MSG_SERVICE_ACCEPT] = NULL;
- ssh->packet_dispatch[SSH2_MSG_KEXINIT] = NULL;
- ssh->packet_dispatch[SSH2_MSG_NEWKEYS] = NULL;
- ssh->packet_dispatch[SSH2_MSG_KEXDH_INIT] = NULL;
- ssh->packet_dispatch[SSH2_MSG_KEXDH_REPLY] = NULL;
- /* ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_REQUEST] = NULL; duplicate case value */
- /* ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_GROUP] = NULL; duplicate case value */
- ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_INIT] = NULL;
- ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_REPLY] = NULL;
- ssh->packet_dispatch[SSH2_MSG_USERAUTH_REQUEST] = NULL;
- ssh->packet_dispatch[SSH2_MSG_USERAUTH_FAILURE] = NULL;
- ssh->packet_dispatch[SSH2_MSG_USERAUTH_SUCCESS] = NULL;
- ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] = NULL;
- ssh->packet_dispatch[SSH2_MSG_USERAUTH_PK_OK] = NULL;
- /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ] = NULL; duplicate case value */
- /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_REQUEST] = NULL; duplicate case value */
- ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_RESPONSE] = NULL;
- ssh->packet_dispatch[SSH2_MSG_GLOBAL_REQUEST] = NULL;
- ssh->packet_dispatch[SSH2_MSG_REQUEST_SUCCESS] = NULL;
- ssh->packet_dispatch[SSH2_MSG_REQUEST_FAILURE] = NULL;
- ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN] = NULL;
- ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_CONFIRMATION] = NULL;
- ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_FAILURE] = NULL;
- ssh->packet_dispatch[SSH2_MSG_CHANNEL_WINDOW_ADJUST] = NULL;
- ssh->packet_dispatch[SSH2_MSG_CHANNEL_DATA] = NULL;
- ssh->packet_dispatch[SSH2_MSG_CHANNEL_EXTENDED_DATA] = NULL;
- ssh->packet_dispatch[SSH2_MSG_CHANNEL_EOF] = NULL;
- ssh->packet_dispatch[SSH2_MSG_CHANNEL_CLOSE] = NULL;
- ssh->packet_dispatch[SSH2_MSG_CHANNEL_REQUEST] = NULL;
- ssh->packet_dispatch[SSH2_MSG_CHANNEL_SUCCESS] = NULL;
- ssh->packet_dispatch[SSH2_MSG_CHANNEL_FAILURE] = NULL;
+ ssh->packet_dispatch[SSH2_MSG_UNIMPLEMENTED] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_SERVICE_REQUEST] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_SERVICE_ACCEPT] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_KEXINIT] = ssh2_msg_transport;
+ ssh->packet_dispatch[SSH2_MSG_NEWKEYS] = ssh2_msg_transport;
+ ssh->packet_dispatch[SSH2_MSG_KEXDH_INIT] = ssh2_msg_transport;
+ ssh->packet_dispatch[SSH2_MSG_KEXDH_REPLY] = ssh2_msg_transport;
+ /* ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_REQUEST] = ssh2_msg_transport; duplicate case value */
+ /* ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_GROUP] = ssh2_msg_transport; duplicate case value */
+ ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_INIT] = ssh2_msg_transport;
+ ssh->packet_dispatch[SSH2_MSG_KEX_DH_GEX_REPLY] = ssh2_msg_transport;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_REQUEST] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_FAILURE] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_SUCCESS] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_PK_OK] = ssh2_msg_unexpected;
+ /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ] = ssh2_msg_unexpected; duplicate case value */
+ /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_REQUEST] = ssh2_msg_unexpected; duplicate case value */
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_RESPONSE] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_GLOBAL_REQUEST] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_REQUEST_SUCCESS] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_REQUEST_FAILURE] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_CONFIRMATION] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_FAILURE] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_WINDOW_ADJUST] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_DATA] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EXTENDED_DATA] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EOF] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_CLOSE] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_REQUEST] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_SUCCESS] = ssh2_msg_unexpected;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_FAILURE] = ssh2_msg_unexpected;
/*
- * These special message types we install handlers for.
+ * These messages have a special handler from the start.
*/
ssh->packet_dispatch[SSH2_MSG_DISCONNECT] = ssh2_msg_disconnect;
ssh->packet_dispatch[SSH2_MSG_IGNORE] = ssh_msg_ignore; /* shared with SSH-1 */
ssh->packet_dispatch[SSH2_MSG_DEBUG] = ssh2_msg_debug;
}
-static void ssh2_timer(void *ctx, long now)
+static void ssh2_timer(void *ctx, unsigned long now)
{
Ssh ssh = (Ssh)ctx;
if (ssh->state == SSH_STATE_CLOSED)
return;
- if (!ssh->kex_in_progress && ssh->cfg.ssh_rekey_time != 0 &&
- now - ssh->next_rekey >= 0) {
+ if (!ssh->kex_in_progress && conf_get_int(ssh->conf, CONF_ssh_rekey_time) != 0 &&
+ now == ssh->next_rekey) {
do_ssh2_transport(ssh, "timeout", -1, NULL);
}
}
do_ssh2_transport(ssh, "too much data received", -1, NULL);
}
- if (pktin && ssh->packet_dispatch[pktin->type]) {
+ if (pktin)
ssh->packet_dispatch[pktin->type](ssh, pktin);
- return;
- }
-
- if (!ssh->protocol_initial_phase_done ||
- (pktin && pktin->type >= 20 && pktin->type < 50)) {
- if (do_ssh2_transport(ssh, in, inlen, pktin) &&
- !ssh->protocol_initial_phase_done) {
- ssh->protocol_initial_phase_done = TRUE;
- /*
- * Allow authconn to initialise itself.
- */
- do_ssh2_authconn(ssh, NULL, 0, NULL);
- }
- } else {
+ else if (!ssh->protocol_initial_phase_done)
+ do_ssh2_transport(ssh, in, inlen, pktin);
+ else
do_ssh2_authconn(ssh, in, inlen, pktin);
- }
+}
+
+static void ssh_cache_conf_values(Ssh ssh)
+{
+ ssh->logomitdata = conf_get_int(ssh->conf, CONF_logomitdata);
}
/*
* Returns an error message, or NULL on success.
*/
static const char *ssh_init(void *frontend_handle, void **backend_handle,
- Config *cfg,
- char *host, int port, char **realhost, int nodelay,
- int keepalive)
+ Conf *conf, char *host, int port, char **realhost,
+ int nodelay, int keepalive)
{
const char *p;
Ssh ssh;
ssh = snew(struct ssh_tag);
- ssh->cfg = *cfg; /* STRUCTURE COPY */
+ ssh->conf = conf_copy(conf);
+ ssh_cache_conf_values(ssh);
ssh->version = 0; /* when not ready yet */
ssh->s = NULL;
ssh->cipher = NULL;
ssh->deferred_len = 0;
ssh->deferred_size = 0;
ssh->fallback_cmd = 0;
- ssh->pkt_ctx = 0;
- ssh->x11auth = NULL;
+ ssh->pkt_kctx = SSH2_PKTCTX_NOKEX;
+ ssh->pkt_actx = SSH2_PKTCTX_NOAUTH;
+ ssh->x11disp = NULL;
ssh->v1_compressing = FALSE;
ssh->v2_outgoing_sequence = 0;
ssh->ssh1_rdpkt_crstate = 0;
ssh->ssh2_rdpkt_crstate = 0;
- ssh->do_ssh_init_crstate = 0;
ssh->ssh_gotdata_crstate = 0;
ssh->do_ssh1_connection_crstate = 0;
- ssh->do_ssh1_login_crstate = 0;
- ssh->do_ssh2_transport_crstate = 0;
- ssh->do_ssh2_authconn_crstate = 0;
ssh->do_ssh_init_state = NULL;
ssh->do_ssh1_login_state = NULL;
ssh->do_ssh2_transport_state = NULL;
ssh->deferred_rekey_reason = NULL;
bufchain_init(&ssh->queued_incoming_data);
ssh->frozen = FALSE;
+ ssh->username = NULL;
+ ssh->sent_console_eof = FALSE;
+ ssh->got_pty = FALSE;
*backend_handle = ssh;
#endif
ssh->frontend = frontend_handle;
- ssh->term_width = ssh->cfg.width;
- ssh->term_height = ssh->cfg.height;
+ ssh->term_width = conf_get_int(ssh->conf, CONF_width);
+ ssh->term_height = conf_get_int(ssh->conf, CONF_height);
ssh->channels = NULL;
ssh->rportfwds = NULL;
ssh->send_ok = 0;
ssh->editing = 0;
ssh->echoing = 0;
- ssh->v1_throttle_count = 0;
+ ssh->conn_throttle_count = 0;
ssh->overall_bufsize = 0;
ssh->fallback_cmd = 0;
ssh->incoming_data_size = ssh->outgoing_data_size =
ssh->deferred_data_size = 0L;
- ssh->max_data_size = parse_blocksize(ssh->cfg.ssh_rekey_data);
+ ssh->max_data_size = parse_blocksize(conf_get_str(ssh->conf,
+ CONF_ssh_rekey_data));
ssh->kex_in_progress = FALSE;
+#ifndef NO_GSSAPI
+ ssh->gsslibs = NULL;
+#endif
+
p = connect_to_host(ssh, host, port, realhost, nodelay, keepalive);
if (p != NULL)
return p;
while (ssh->qhead) {
struct queued_handler *qh = ssh->qhead;
ssh->qhead = qh->next;
- sfree(ssh->qhead);
+ sfree(qh);
}
ssh->qhead = ssh->qtail = NULL;
x11_close(c->u.x11.s);
break;
case CHAN_SOCKDATA:
+ case CHAN_SOCKDATA_DORMANT:
if (c->u.pfd.s != NULL)
pfd_close(c->u.pfd.s);
break;
}
+ if (ssh->version == 2) {
+ struct outstanding_channel_request *ocr, *nocr;
+ ocr = c->v.v2.chanreq_head;
+ while (ocr) {
+ ocr->handler(c, NULL, ocr->ctx);
+ nocr = ocr->next;
+ sfree(ocr);
+ ocr = nocr;
+ }
+ bufchain_clear(&c->v.v2.outbuffer);
+ }
sfree(c);
}
freetree234(ssh->channels);
if (ssh->rportfwds) {
while ((pf = delpos234(ssh->rportfwds, 0)) != NULL)
- sfree(pf);
+ free_rportfwd(pf);
freetree234(ssh->rportfwds);
ssh->rportfwds = NULL;
}
sfree(ssh->deferred_send_data);
- if (ssh->x11auth)
- x11_free_auth(ssh->x11auth);
+ if (ssh->x11disp)
+ x11_free_display(ssh->x11disp);
sfree(ssh->do_ssh_init_state);
sfree(ssh->do_ssh1_login_state);
sfree(ssh->do_ssh2_transport_state);
sfree(ssh->do_ssh2_authconn_state);
sfree(ssh->v_c);
sfree(ssh->v_s);
+ sfree(ssh->fullhostname);
if (ssh->crcda_ctx) {
crcda_free_context(ssh->crcda_ctx);
ssh->crcda_ctx = NULL;
if (ssh->pinger)
pinger_free(ssh->pinger);
bufchain_clear(&ssh->queued_incoming_data);
+ sfree(ssh->username);
+ conf_free(ssh->conf);
+#ifndef NO_GSSAPI
+ if (ssh->gsslibs)
+ ssh_gss_cleanup(ssh->gsslibs);
+#endif
sfree(ssh);
random_unref();
/*
* Reconfigure the SSH backend.
*/
-static void ssh_reconfig(void *handle, Config *cfg)
+static void ssh_reconfig(void *handle, Conf *conf)
{
Ssh ssh = (Ssh) handle;
char *rekeying = NULL, rekey_mandatory = FALSE;
unsigned long old_max_data_size;
+ int i, rekey_time;
- pinger_reconfig(ssh->pinger, &ssh->cfg, cfg);
+ pinger_reconfig(ssh->pinger, ssh->conf, conf);
if (ssh->portfwds)
- ssh_setup_portfwd(ssh, cfg);
+ ssh_setup_portfwd(ssh, conf);
- if (ssh->cfg.ssh_rekey_time != cfg->ssh_rekey_time &&
- cfg->ssh_rekey_time != 0) {
- long new_next = ssh->last_rekey + cfg->ssh_rekey_time*60*TICKSPERSEC;
- long now = GETTICKCOUNT();
+ rekey_time = conf_get_int(conf, CONF_ssh_rekey_time);
+ if (conf_get_int(ssh->conf, CONF_ssh_rekey_time) != rekey_time &&
+ rekey_time != 0) {
+ unsigned long new_next = ssh->last_rekey + rekey_time*60*TICKSPERSEC;
+ unsigned long now = GETTICKCOUNT();
- if (new_next - now < 0) {
+ if (now - ssh->last_rekey > rekey_time*60*TICKSPERSEC) {
rekeying = "timeout shortened";
} else {
ssh->next_rekey = schedule_timer(new_next - now, ssh2_timer, ssh);
}
old_max_data_size = ssh->max_data_size;
- ssh->max_data_size = parse_blocksize(cfg->ssh_rekey_data);
+ ssh->max_data_size = parse_blocksize(conf_get_str(ssh->conf,
+ CONF_ssh_rekey_data));
if (old_max_data_size != ssh->max_data_size &&
ssh->max_data_size != 0) {
if (ssh->outgoing_data_size > ssh->max_data_size ||
rekeying = "data limit lowered";
}
- if (ssh->cfg.compression != cfg->compression) {
+ if (conf_get_int(ssh->conf, CONF_compression) !=
+ conf_get_int(conf, CONF_compression)) {
rekeying = "compression setting changed";
rekey_mandatory = TRUE;
}
- if (ssh->cfg.ssh2_des_cbc != cfg->ssh2_des_cbc ||
- memcmp(ssh->cfg.ssh_cipherlist, cfg->ssh_cipherlist,
- sizeof(ssh->cfg.ssh_cipherlist))) {
+ for (i = 0; i < CIPHER_MAX; i++)
+ if (conf_get_int_int(ssh->conf, CONF_ssh_cipherlist, i) !=
+ conf_get_int_int(conf, CONF_ssh_cipherlist, i)) {
+ rekeying = "cipher settings changed";
+ rekey_mandatory = TRUE;
+ }
+ if (conf_get_int(ssh->conf, CONF_ssh2_des_cbc) !=
+ conf_get_int(conf, CONF_ssh2_des_cbc)) {
rekeying = "cipher settings changed";
rekey_mandatory = TRUE;
}
- ssh->cfg = *cfg; /* STRUCTURE COPY */
+ conf_free(ssh->conf);
+ ssh->conf = conf_copy(conf);
+ ssh_cache_conf_values(ssh);
if (rekeying) {
if (!ssh->kex_in_progress) {
if (ssh->version == 1) {
return override_value;
} else if (ssh->version == 2) {
- if (!ssh->mainchan || ssh->mainchan->closes > 0)
+ if (!ssh->mainchan)
return override_value;
else
return (override_value +
ssh->size_needed = TRUE; /* buffer for later */
break;
case SSH_STATE_SESSION:
- if (!ssh->cfg.nopty) {
+ if (!conf_get_int(ssh->conf, CONF_nopty)) {
if (ssh->version == 1) {
send_packet(ssh, SSH1_CMSG_WINDOW_SIZE,
PKT_INT, ssh->term_height,
PKT_INT, ssh->term_width,
PKT_INT, 0, PKT_INT, 0, PKT_END);
} else if (ssh->mainchan) {
- pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(pktout, ssh->mainchan->remoteid);
- ssh2_pkt_addstring(pktout, "window-change");
- ssh2_pkt_addbool(pktout, 0);
+ pktout = ssh2_chanreq_init(ssh->mainchan, "window-change",
+ NULL, NULL);
ssh2_pkt_adduint32(pktout, ssh->term_width);
ssh2_pkt_adduint32(pktout, ssh->term_height);
ssh2_pkt_adduint32(pktout, 0);
static const struct telnet_special ssh1_ignore_special[] = {
{"IGNORE message", TS_NOP}
};
- static const struct telnet_special ssh2_transport_specials[] = {
+ static const struct telnet_special ssh2_ignore_special[] = {
{"IGNORE message", TS_NOP},
+ };
+ static const struct telnet_special ssh2_rekey_special[] = {
{"Repeat key exchange", TS_REKEY},
};
static const struct telnet_special ssh2_session_specials[] = {
{NULL, TS_SEP},
{"Break", TS_BRK},
- /* These are the signal names defined by draft-ietf-secsh-connect-23.
+ /* These are the signal names defined by RFC 4254.
* They include all the ISO C signals, but are a subset of the POSIX
* required signals. */
{"SIGINT (Interrupt)", TS_SIGINT},
{NULL, TS_EXITMENU}
};
/* XXX review this length for any changes: */
- static struct telnet_special ssh_specials[lenof(ssh2_transport_specials) +
+ static struct telnet_special ssh_specials[lenof(ssh2_ignore_special) +
+ lenof(ssh2_rekey_special) +
lenof(ssh2_session_specials) +
lenof(specials_end)];
Ssh ssh = (Ssh) handle;
if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE))
ADD_SPECIALS(ssh1_ignore_special);
} else if (ssh->version == 2) {
- ADD_SPECIALS(ssh2_transport_specials);
+ if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH2_IGNORE))
+ ADD_SPECIALS(ssh2_ignore_special);
+ if (!(ssh->remote_bugs & BUG_SSH2_REKEY))
+ ADD_SPECIALS(ssh2_rekey_special);
if (ssh->mainchan)
ADD_SPECIALS(ssh2_session_specials);
} /* else we're not ready yet */
if (ssh->version == 1) {
send_packet(ssh, SSH1_CMSG_EOF, PKT_END);
} else if (ssh->mainchan) {
- struct Packet *pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_EOF);
- ssh2_pkt_adduint32(pktout, ssh->mainchan->remoteid);
- ssh2_pkt_send(ssh, pktout);
+ sshfwd_write_eof(ssh->mainchan);
ssh->send_ok = 0; /* now stop trying to read from stdin */
}
logevent("Sent EOF message");
if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE))
send_packet(ssh, SSH1_MSG_IGNORE, PKT_STR, "", PKT_END);
} else {
- pktout = ssh2_pkt_init(SSH2_MSG_IGNORE);
- ssh2_pkt_addstring_start(pktout);
- ssh2_pkt_send_noqueue(ssh, pktout);
+ if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH2_IGNORE)) {
+ pktout = ssh2_pkt_init(SSH2_MSG_IGNORE);
+ ssh2_pkt_addstring_start(pktout);
+ ssh2_pkt_send_noqueue(ssh, pktout);
+ }
}
} else if (code == TS_REKEY) {
if (!ssh->kex_in_progress && ssh->version == 2) {
if (ssh->version == 1) {
logevent("Unable to send BREAK signal in SSH-1");
} else if (ssh->mainchan) {
- pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(pktout, ssh->mainchan->remoteid);
- ssh2_pkt_addstring(pktout, "break");
- ssh2_pkt_addbool(pktout, 0);
+ pktout = ssh2_chanreq_init(ssh->mainchan, "break", NULL, NULL);
ssh2_pkt_adduint32(pktout, 0); /* default break length */
ssh2_pkt_send(ssh, pktout);
}
if (signame) {
/* It's a signal. */
if (ssh->version == 2 && ssh->mainchan) {
- pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_REQUEST);
- ssh2_pkt_adduint32(pktout, ssh->mainchan->remoteid);
- ssh2_pkt_addstring(pktout, "signal");
- ssh2_pkt_addbool(pktout, 0);
+ pktout = ssh2_chanreq_init(ssh->mainchan, "signal", NULL, NULL);
ssh2_pkt_addstring(pktout, signame);
ssh2_pkt_send(ssh, pktout);
logeventf(ssh, "Sent signal SIG%s", signame);
Ssh ssh = (Ssh) handle;
struct ssh_channel *c;
c = snew(struct ssh_channel);
- c->ssh = ssh;
- if (c) {
- c->halfopen = TRUE;
- c->localid = alloc_channel_id(ssh);
- c->closes = 0;
- c->type = CHAN_SOCKDATA_DORMANT;/* identify channel type */
- c->u.pfd.s = s;
- bufchain_init(&c->v.v2.outbuffer);
- add234(ssh->channels, c);
- }
+ c->ssh = ssh;
+ ssh2_channel_init(c);
+ c->halfopen = TRUE;
+ c->type = CHAN_SOCKDATA_DORMANT;/* identify channel type */
+ c->u.pfd.s = s;
+ add234(ssh->channels, c);
return c;
}
static void ssh_unthrottle(void *handle, int bufsize)
{
Ssh ssh = (Ssh) handle;
+ int buflimit;
+
if (ssh->version == 1) {
if (ssh->v1_stdout_throttling && bufsize < SSH1_BUFFER_LIMIT) {
ssh->v1_stdout_throttling = 0;
- ssh1_throttle(ssh, -1);
+ ssh_throttle_conn(ssh, -1);
}
} else {
- if (ssh->mainchan && ssh->mainchan->closes == 0)
- ssh2_set_window(ssh->mainchan, OUR_V2_WINSIZE - bufsize);
+ if (ssh->mainchan) {
+ ssh2_set_window(ssh->mainchan,
+ bufsize < ssh->mainchan->v.v2.locmaxwin ?
+ ssh->mainchan->v.v2.locmaxwin - bufsize : 0);
+ if (conf_get_int(ssh->conf, CONF_ssh_simple))
+ buflimit = 0;
+ else
+ buflimit = ssh->mainchan->v.v2.locmaxwin;
+ if (ssh->mainchan->throttling_conn && bufsize <= buflimit) {
+ ssh->mainchan->throttling_conn = 0;
+ ssh_throttle_conn(ssh, -1);
+ }
+ }
}
+
+ /*
+ * Now process any SSH connection data that was stashed in our
+ * queue while we were frozen.
+ */
+ ssh_process_queued_incoming_data(ssh);
}
void ssh_send_port_open(void *channel, char *hostname, int port, char *org)
Ssh ssh = c->ssh;
struct Packet *pktout;
- logeventf(ssh, "Opening forwarded connection to %s:%d", hostname, port);
+ logeventf(ssh, "Opening connection to %s:%d for %s", hostname, port, org);
if (ssh->version == 1) {
send_packet(ssh, SSH1_MSG_PORT_OPEN,
/* PKT_STR, <org:orgport>, */
PKT_END);
} else {
- pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_OPEN);
- ssh2_pkt_addstring(pktout, "direct-tcpip");
- ssh2_pkt_adduint32(pktout, c->localid);
- c->v.v2.locwindow = OUR_V2_WINSIZE;
- ssh2_pkt_adduint32(pktout, c->v.v2.locwindow);/* our window size */
- ssh2_pkt_adduint32(pktout, OUR_V2_MAXPKT); /* our max pkt size */
+ pktout = ssh2_chanopen_init(c, "direct-tcpip");
ssh2_pkt_addstring(pktout, hostname);
ssh2_pkt_adduint32(pktout, port);
/*
* too much hassle to keep track, and partly I'm not
* convinced the server should be told details like that
* about my local network configuration.
+ * The "originator IP address" is syntactically a numeric
+ * IP address, and some servers (e.g., Tectia) get upset
+ * if it doesn't match this syntax.
*/
- ssh2_pkt_addstring(pktout, "client-side-connection");
+ ssh2_pkt_addstring(pktout, "0.0.0.0");
ssh2_pkt_adduint32(pktout, 0);
ssh2_pkt_send(ssh, pktout);
}
}
-static Socket ssh_socket(void *handle)
+static int ssh_connected(void *handle)
{
Ssh ssh = (Ssh) handle;
- return ssh->s;
+ return ssh->s != NULL;
}
static int ssh_sendok(void *handle)
if (ssh->s != NULL)
return -1;
else
- return (ssh->exitcode >= 0 ? ssh->exitcode : 0);
+ return (ssh->exitcode >= 0 ? ssh->exitcode : INT_MAX);
}
/*
ssh_size,
ssh_special,
ssh_get_specials,
- ssh_socket,
+ ssh_connected,
ssh_return_exitcode,
ssh_sendok,
ssh_ldisc,
ssh_provide_logctx,
ssh_unthrottle,
ssh_cfg_info,
+ "ssh",
+ PROT_SSH,
22
};