static int pty_signal_pipe[2] = { -1, -1 }; /* obviously bogus initial val */
struct pty_tag {
- Config cfg;
+ Conf *conf;
int master_fd, slave_fd;
void *frontend;
char name[FILENAME_MAX];
- int child_pid;
+ pid_t child_pid;
int term_width, term_height;
int child_dead, finished;
int exit_code;
static int pty_find_by_pid(void *av, void *bv)
{
- int a = *(int *)av;
+ pid_t a = *(pid_t *)av;
Pty b = (Pty)bv;
if (a < b->child_pid)
static Pty single_pty = NULL;
#ifndef OMIT_UTMP
-static int pty_utmp_helper_pid, pty_utmp_helper_pipe;
+static pid_t pty_utmp_helper_pid = -1;
+static int pty_utmp_helper_pipe = -1;
static int pty_stamped_utmp;
static struct utmpx utmp_entry;
#endif
static void sigchld_handler(int signum)
{
- write(pty_signal_pipe[1], "x", 1);
+ if (write(pty_signal_pipe[1], "x", 1) <= 0)
+ /* not much we can do about it */;
}
#ifndef OMIT_UTMP
{
putty_signal(signum, SIG_DFL);
cleanup_utmp();
- setuid(getuid());
raise(signum);
}
#endif
chown(pty->name, getuid(), gp ? gp->gr_gid : -1);
chmod(pty->name, 0600);
#else
- pty->master_fd = open("/dev/ptmx", O_RDWR);
+
+ const int flags = O_RDWR
+#ifdef O_NOCTTY
+ | O_NOCTTY
+#endif
+ ;
+
+#ifdef HAVE_POSIX_OPENPT
+ pty->master_fd = posix_openpt(flags);
+
+ if (pty->master_fd < 0) {
+ perror("posix_openpt");
+ exit(1);
+ }
+#else
+ pty->master_fd = open("/dev/ptmx", flags);
if (pty->master_fd < 0) {
perror("/dev/ptmx: open");
exit(1);
}
+#endif
if (grantpt(pty->master_fd) < 0) {
perror("grantpt");
strncpy(pty->name, ptsname(pty->master_fd), FILENAME_MAX-1);
#endif
- {
- /*
- * Set the pty master into non-blocking mode.
- */
- int fl;
- fl = fcntl(pty->master_fd, F_GETFL);
- if (fl != -1 && !(fl & O_NONBLOCK))
- fcntl(pty->master_fd, F_SETFL, fl | O_NONBLOCK);
- }
+ nonblock(pty->master_fd);
if (!ptys_by_fd)
ptys_by_fd = newtree234(pty_compare_by_fd);
#endif
pty = single_pty = snew(struct pty_tag);
+ pty->conf = NULL;
bufchain_init(&pty->output_data);
/* set the child signal handler straight away; it needs to be set
if (geteuid() != getuid() || getegid() != getgid()) {
pty_open_master(pty);
- }
#ifndef OMIT_UTMP
- /*
- * Fork off the utmp helper.
- */
- if (pipe(pipefd) < 0) {
- perror("pterm: pipe");
- exit(1);
- }
- cloexec(pipefd[0]);
- cloexec(pipefd[1]);
- pid = fork();
- if (pid < 0) {
- perror("pterm: fork");
- exit(1);
- } else if (pid == 0) {
- char display[128], buffer[128];
- int dlen, ret;
-
- close(pipefd[1]);
- /*
- * Now sit here until we receive a display name from the
- * other end of the pipe, and then stamp utmp. Unstamp utmp
- * again, and exit, when the pipe closes.
- */
+ /*
+ * Fork off the utmp helper.
+ */
+ if (pipe(pipefd) < 0) {
+ perror("pterm: pipe");
+ exit(1);
+ }
+ cloexec(pipefd[0]);
+ cloexec(pipefd[1]);
+ pid = fork();
+ if (pid < 0) {
+ perror("pterm: fork");
+ exit(1);
+ } else if (pid == 0) {
+ char display[128], buffer[128];
+ int dlen, ret;
+
+ close(pipefd[1]);
+ /*
+ * Now sit here until we receive a display name from the
+ * other end of the pipe, and then stamp utmp. Unstamp utmp
+ * again, and exit, when the pipe closes.
+ */
- dlen = 0;
- while (1) {
+ dlen = 0;
+ while (1) {
- ret = read(pipefd[0], buffer, lenof(buffer));
- if (ret <= 0) {
- cleanup_utmp();
- _exit(0);
- } else if (!pty_stamped_utmp) {
- if (dlen < lenof(display))
- memcpy(display+dlen, buffer,
- min(ret, lenof(display)-dlen));
- if (buffer[ret-1] == '\0') {
- /*
- * Now we have a display name. NUL-terminate
- * it, and stamp utmp.
- */
- display[lenof(display)-1] = '\0';
- /*
- * Trap as many fatal signals as we can in the
- * hope of having the best possible chance to
- * clean up utmp before termination. We are
- * unfortunately unprotected against SIGKILL,
- * but that's life.
- */
- putty_signal(SIGHUP, fatal_sig_handler);
- putty_signal(SIGINT, fatal_sig_handler);
- putty_signal(SIGQUIT, fatal_sig_handler);
- putty_signal(SIGILL, fatal_sig_handler);
- putty_signal(SIGABRT, fatal_sig_handler);
- putty_signal(SIGFPE, fatal_sig_handler);
- putty_signal(SIGPIPE, fatal_sig_handler);
- putty_signal(SIGALRM, fatal_sig_handler);
- putty_signal(SIGTERM, fatal_sig_handler);
- putty_signal(SIGSEGV, fatal_sig_handler);
- putty_signal(SIGUSR1, fatal_sig_handler);
- putty_signal(SIGUSR2, fatal_sig_handler);
+ ret = read(pipefd[0], buffer, lenof(buffer));
+ if (ret <= 0) {
+ cleanup_utmp();
+ _exit(0);
+ } else if (!pty_stamped_utmp) {
+ if (dlen < lenof(display))
+ memcpy(display+dlen, buffer,
+ min(ret, lenof(display)-dlen));
+ if (buffer[ret-1] == '\0') {
+ /*
+ * Now we have a display name. NUL-terminate
+ * it, and stamp utmp.
+ */
+ display[lenof(display)-1] = '\0';
+ /*
+ * Trap as many fatal signals as we can in the
+ * hope of having the best possible chance to
+ * clean up utmp before termination. We are
+ * unfortunately unprotected against SIGKILL,
+ * but that's life.
+ */
+ putty_signal(SIGHUP, fatal_sig_handler);
+ putty_signal(SIGINT, fatal_sig_handler);
+ putty_signal(SIGQUIT, fatal_sig_handler);
+ putty_signal(SIGILL, fatal_sig_handler);
+ putty_signal(SIGABRT, fatal_sig_handler);
+ putty_signal(SIGFPE, fatal_sig_handler);
+ putty_signal(SIGPIPE, fatal_sig_handler);
+ putty_signal(SIGALRM, fatal_sig_handler);
+ putty_signal(SIGTERM, fatal_sig_handler);
+ putty_signal(SIGSEGV, fatal_sig_handler);
+ putty_signal(SIGUSR1, fatal_sig_handler);
+ putty_signal(SIGUSR2, fatal_sig_handler);
#ifdef SIGBUS
- putty_signal(SIGBUS, fatal_sig_handler);
+ putty_signal(SIGBUS, fatal_sig_handler);
#endif
#ifdef SIGPOLL
- putty_signal(SIGPOLL, fatal_sig_handler);
+ putty_signal(SIGPOLL, fatal_sig_handler);
#endif
#ifdef SIGPROF
- putty_signal(SIGPROF, fatal_sig_handler);
+ putty_signal(SIGPROF, fatal_sig_handler);
#endif
#ifdef SIGSYS
- putty_signal(SIGSYS, fatal_sig_handler);
+ putty_signal(SIGSYS, fatal_sig_handler);
#endif
#ifdef SIGTRAP
- putty_signal(SIGTRAP, fatal_sig_handler);
+ putty_signal(SIGTRAP, fatal_sig_handler);
#endif
#ifdef SIGVTALRM
- putty_signal(SIGVTALRM, fatal_sig_handler);
+ putty_signal(SIGVTALRM, fatal_sig_handler);
#endif
#ifdef SIGXCPU
- putty_signal(SIGXCPU, fatal_sig_handler);
+ putty_signal(SIGXCPU, fatal_sig_handler);
#endif
#ifdef SIGXFSZ
- putty_signal(SIGXFSZ, fatal_sig_handler);
+ putty_signal(SIGXFSZ, fatal_sig_handler);
#endif
#ifdef SIGIO
- putty_signal(SIGIO, fatal_sig_handler);
+ putty_signal(SIGIO, fatal_sig_handler);
#endif
- setup_utmp(pty->name, display);
- }
- }
- }
- } else {
- close(pipefd[0]);
- pty_utmp_helper_pid = pid;
- pty_utmp_helper_pipe = pipefd[1];
- }
+ setup_utmp(pty->name, display);
+ }
+ }
+ }
+ } else {
+ close(pipefd[0]);
+ pty_utmp_helper_pid = pid;
+ pty_utmp_helper_pipe = pipefd[1];
+ }
#endif
+ }
/* Drop privs. */
{
int gid = getgid(), uid = getuid();
int setresgid(gid_t, gid_t, gid_t);
int setresuid(uid_t, uid_t, uid_t);
- setresgid(gid, gid, gid);
- setresuid(uid, uid, uid);
+ if (setresgid(gid, gid, gid) < 0) {
+ perror("setresgid");
+ exit(1);
+ }
+ if (setresuid(uid, uid, uid) < 0) {
+ perror("setresuid");
+ exit(1);
+ }
#else
- setgid(getgid());
- setuid(getuid());
+ if (setgid(getgid()) < 0) {
+ perror("setgid");
+ exit(1);
+ }
+ if (setuid(getuid()) < 0) {
+ perror("setuid");
+ exit(1);
+ }
#endif
}
}
}
if (finished && !pty->finished) {
+ int close_on_exit;
+
uxsel_del(pty->master_fd);
pty_close(pty);
pty->master_fd = -1;
* Only On Clean and it wasn't a clean exit) do we output a
* `terminated' message.
*/
- if (pty->cfg.close_on_exit == FORCE_OFF ||
- (pty->cfg.close_on_exit == AUTO && pty->exit_code != 0)) {
+ close_on_exit = conf_get_int(pty->conf, CONF_close_on_exit);
+ if (close_on_exit == FORCE_OFF ||
+ (close_on_exit == AUTO && pty->exit_code != 0)) {
char message[512];
+ message[0] = '\0';
if (WIFEXITED(pty->exit_code))
sprintf(message, "\r\n[pterm: process terminated with exit"
" code %d]\r\n", WEXITSTATUS(pty->exit_code));
if (fd == pty_signal_pipe[0]) {
pid_t pid;
- int ipid;
int status;
char c[1];
- read(pty_signal_pipe[0], c, 1); /* ignore its value; it'll be `x' */
+ if (read(pty_signal_pipe[0], c, 1) <= 0)
+ /* ignore error */;
+ /* ignore its value; it'll be `x' */
do {
pid = waitpid(-1, &status, WNOHANG);
- ipid = pid;
pty = find234(ptys_by_pid, &pid, pty_find_by_pid);
if (pty)
* Also places the canonical host name into `realhost'. It must be
* freed by the caller.
*/
-static const char *pty_init(void *frontend, void **backend_handle, Config *cfg,
+static const char *pty_init(void *frontend, void **backend_handle, Conf *conf,
char *host, int port, char **realhost, int nodelay,
int keepalive)
{
if (single_pty) {
pty = single_pty;
+ assert(pty->conf == NULL);
} else {
pty = snew(struct pty_tag);
pty->master_fd = pty->slave_fd = -1;
pty->frontend = frontend;
*backend_handle = NULL; /* we can't sensibly use this, sadly */
- pty->cfg = *cfg; /* structure copy */
- pty->term_width = cfg->width;
- pty->term_height = cfg->height;
+ pty->conf = conf_copy(conf);
+ pty->term_width = conf_get_int(conf, CONF_width);
+ pty->term_height = conf_get_int(conf, CONF_height);
if (pty->master_fd < 0)
pty_open_master(pty);
{
struct termios attrs;
tcgetattr(pty->master_fd, &attrs);
- attrs.c_cc[VERASE] = cfg->bksp_is_delete ? '\177' : '\010';
+ attrs.c_cc[VERASE] = conf_get_int(conf, CONF_bksp_is_delete)
+ ? '\177' : '\010';
tcsetattr(pty->master_fd, TCSANOW, &attrs);
}
* Stamp utmp (that is, tell the utmp helper process to do so),
* or not.
*/
- if (!cfg->stamp_utmp) {
- close(pty_utmp_helper_pipe); /* just let the child process die */
- pty_utmp_helper_pipe = -1;
- } else {
- char *location = get_x_display(pty->frontend);
- int len = strlen(location)+1, pos = 0; /* +1 to include NUL */
- while (pos < len) {
- int ret = write(pty_utmp_helper_pipe, location+pos, len - pos);
- if (ret < 0) {
- perror("pterm: writing to utmp helper process");
- close(pty_utmp_helper_pipe); /* arrgh, just give up */
- pty_utmp_helper_pipe = -1;
- break;
- }
- pos += ret;
+ if (pty_utmp_helper_pipe >= 0) { /* if it's < 0, we can't anyway */
+ if (!conf_get_int(conf, CONF_stamp_utmp)) {
+ close(pty_utmp_helper_pipe); /* just let the child process die */
+ pty_utmp_helper_pipe = -1;
+ } else {
+ char *location = get_x_display(pty->frontend);
+ int len = strlen(location)+1, pos = 0; /* +1 to include NUL */
+ while (pos < len) {
+ int ret = write(pty_utmp_helper_pipe, location+pos, len - pos);
+ if (ret < 0) {
+ perror("pterm: writing to utmp helper process");
+ close(pty_utmp_helper_pipe); /* arrgh, just give up */
+ pty_utmp_helper_pipe = -1;
+ break;
+ }
+ pos += ret;
+ }
}
}
#endif
}
close(pty->master_fd);
- fcntl(slavefd, F_SETFD, 0); /* don't close on exec */
+ noncloexec(slavefd);
dup2(slavefd, 0);
dup2(slavefd, 1);
dup2(slavefd, 2);
pgrp = getpid();
tcsetpgrp(0, pgrp);
setpgid(pgrp, pgrp);
- close(open(pty->name, O_WRONLY, 0));
+ {
+ int ptyfd = open(pty->name, O_WRONLY, 0);
+ if (ptyfd >= 0)
+ close(ptyfd);
+ }
setpgid(pgrp, pgrp);
{
- char *term_env_var = dupprintf("TERM=%s", cfg->termtype);
+ char *term_env_var = dupprintf("TERM=%s",
+ conf_get_str(conf, CONF_termtype));
putenv(term_env_var);
/* We mustn't free term_env_var, as putenv links it into the
* environment in place.
}
#endif
{
- char *e = cfg->environmt;
- char *var, *varend, *val, *varval;
- while (*e) {
- var = e;
- while (*e && *e != '\t') e++;
- varend = e;
- if (*e == '\t') e++;
- val = e;
- while (*e) e++;
- e++;
-
- varval = dupprintf("%.*s=%s", varend-var, var, val);
+ char *key, *val;
+
+ for (val = conf_get_str_strs(conf, CONF_environmt, NULL, &key);
+ val != NULL;
+ val = conf_get_str_strs(conf, CONF_environmt, key, &key)) {
+ char *varval = dupcat(key, "=", val, NULL);
putenv(varval);
/*
* We must not free varval, since putenv links it
}
/*
- * SIGINT and SIGQUIT may have been set to ignored by our
- * parent, particularly by things like sh -c 'pterm &' and
- * some window managers. SIGCHLD, meanwhile, was blocked
- * during pt_main() startup. Reverse all this for our child
- * process.
+ * SIGINT, SIGQUIT and SIGPIPE may have been set to ignored by
+ * our parent, particularly by things like sh -c 'pterm &' and
+ * some window or session managers. SIGCHLD, meanwhile, was
+ * blocked during pt_main() startup. Reverse all this for our
+ * child process.
*/
putty_signal(SIGINT, SIG_DFL);
putty_signal(SIGQUIT, SIG_DFL);
+ putty_signal(SIGPIPE, SIG_DFL);
block_signal(SIGCHLD, 0);
- if (pty_argv)
+ if (pty_argv) {
+ /*
+ * Exec the exact argument list we were given.
+ */
execvp(pty_argv[0], pty_argv);
- else {
+ /*
+ * If that fails, and if we had exactly one argument, pass
+ * that argument to $SHELL -c.
+ *
+ * This arranges that we can _either_ follow 'pterm -e'
+ * with a list of argv elements to be fed directly to
+ * exec, _or_ with a single argument containing a command
+ * to be parsed by a shell (but, in cases of doubt, the
+ * former is more reliable).
+ *
+ * A quick survey of other terminal emulators' -e options
+ * (as of Debian squeeze) suggests that:
+ *
+ * - xterm supports both modes, more or less like this
+ * - gnome-terminal will only accept a one-string shell command
+ * - Eterm, kterm and rxvt will only accept a list of
+ * argv elements (as did older versions of pterm).
+ *
+ * It therefore seems important to support both usage
+ * modes in order to be a drop-in replacement for either
+ * xterm or gnome-terminal, and hence for anyone's
+ * plausible uses of the Debian-style alias
+ * 'x-terminal-emulator'...
+ */
+ if (pty_argv[1] == NULL) {
+ char *shell = getenv("SHELL");
+ if (shell)
+ execl(shell, shell, "-c", pty_argv[0], (void *)NULL);
+ }
+ } else {
char *shell = getenv("SHELL");
char *shellname;
- if (cfg->login_shell) {
+ if (conf_get_int(conf, CONF_login_shell)) {
char *p = strrchr(shell, '/');
shellname = snewn(2+strlen(shell), char);
p = p ? p+1 : shell;
return NULL;
}
-static void pty_reconfig(void *handle, Config *cfg)
+static void pty_reconfig(void *handle, Conf *conf)
{
Pty pty = (Pty)handle;
/*
* unfortunately we do need to pick up the setting of Close On
* Exit so we know whether to give a `terminated' message.
*/
- pty->cfg = *cfg; /* structure copy */
+ conf_copy_into(pty->conf, conf);
}
/*
del234(ptys_by_pid, pty);
del234(ptys_by_fd, pty);
- sfree(pty);
+ conf_free(pty->conf);
+ pty->conf = NULL;
+
+ if (pty == single_pty) {
+ /*
+ * Leave this structure around in case we need to Restart
+ * Session.
+ */
+ } else {
+ sfree(pty);
+ }
}
static void pty_try_write(Pty pty)