media: imx.rst: Provide a real example for the output format

[linux.git] / Documentation / media / v4l-drivers / imx.rst

diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst
index 1d7eb8c7bd5c23a623f7dea94d9709d4cf85a6b5..36e8d1226ac669a14937481006aee739adc76f77 100644 (file)
--- a/Documentation/media/v4l-drivers/imx.rst
+++ b/Documentation/media/v4l-drivers/imx.rst
@@ -515,10 +515,10 @@ Streaming can then begin independently on the capture device nodes
 be used to select any supported YUV pixelformat on the capture device
 nodes, including planar.
 
 be used to select any supported YUV pixelformat on the capture device
 nodes, including planar.
 

-SabreAuto with ADV7180 decoder
-------------------------------
+i.MX6Q SabreAuto with ADV7180 decoder
+-------------------------------------

 
 

-On the SabreAuto, an on-board ADV7180 SD decoder is connected to the
+On the i.MX6Q SabreAuto, an on-board ADV7180 SD decoder is connected to the

 parallel bus input on the internal video mux to IPU1 CSI0.
 
 The following example configures a pipeline to capture from the ADV7180
 parallel bus input on the internal video mux to IPU1 CSI0.
 
 The following example configures a pipeline to capture from the ADV7180


@@ -547,8 +547,6 @@ This example configures a pipeline to capture from the ADV7180
 video decoder, assuming PAL 720x576 input signals, with Motion
 Compensated de-interlacing. The adv7180 must output sequential or
 alternating fields (field type 'seq-tb' for PAL, or 'alternate').
 video decoder, assuming PAL 720x576 input signals, with Motion
 Compensated de-interlacing. The adv7180 must output sequential or
 alternating fields (field type 'seq-tb' for PAL, or 'alternate').

-$outputfmt can be any format supported by the ipu1_ic_prpvf entity
-at its output pad:

 
 .. code-block:: none
 
 
 .. code-block:: none
 


@@ -565,7 +563,7 @@ at its output pad:
    media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x576]"
    media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x576 field:none]"
    media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x576 field:none]"
    media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x576]"
    media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x576 field:none]"
    media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x576 field:none]"

-   media-ctl -V "'ipu1_ic_prpvf':1 [fmt:$outputfmt field:none]"
+   media-ctl -V "'ipu1_ic_prpvf':1 [fmt:AYUV32/720x576 field:none]"

 
 Streaming can then begin on the capture device node at
 "ipu1_ic_prpvf capture". The v4l2-ctl tool can be used to select any
 
 Streaming can then begin on the capture device node at
 "ipu1_ic_prpvf capture". The v4l2-ctl tool can be used to select any