+ if (ret->encrypted && ret->keyblob_len % 8 != 0) {
+ errmsg = "encrypted key blob is not a multiple of "
+ "cipher block size";
+ goto error;
+ }
+
+ smemclr(base64_bit, sizeof(base64_bit));
+ if (errmsg_p) *errmsg_p = NULL;
+ return ret;
+
+ error:
+ if (line) {
+ smemclr(line, strlen(line));
+ sfree(line);
+ line = NULL;
+ }
+ smemclr(base64_bit, sizeof(base64_bit));
+ if (ret) {
+ if (ret->keyblob) {
+ smemclr(ret->keyblob, ret->keyblob_size);
+ sfree(ret->keyblob);
+ }
+ smemclr(ret, sizeof(*ret));
+ sfree(ret);
+ }
+ if (errmsg_p) *errmsg_p = errmsg;
+ if (fp) fclose(fp);
+ return NULL;
+}
+
+int openssh_pem_encrypted(const Filename *filename)
+{
+ struct openssh_pem_key *key = load_openssh_pem_key(filename, NULL);
+ int ret;
+
+ if (!key)
+ return 0;
+ ret = key->encrypted;
+ smemclr(key->keyblob, key->keyblob_size);
+ sfree(key->keyblob);
+ smemclr(key, sizeof(*key));
+ sfree(key);
+ return ret;
+}
+
+struct ssh2_userkey *openssh_pem_read(const Filename *filename,
+ char *passphrase,
+ const char **errmsg_p)
+{
+ struct openssh_pem_key *key = load_openssh_pem_key(filename, errmsg_p);
+ struct ssh2_userkey *retkey;
+ unsigned char *p, *q;
+ int ret, id, len, flags;
+ int i, num_integers;
+ struct ssh2_userkey *retval = NULL;
+ const char *errmsg;
+ unsigned char *blob;
+ int blobsize = 0, blobptr, privptr;
+ char *modptr = NULL;
+ int modlen = 0;
+
+ blob = NULL;
+
+ if (!key)
+ return NULL;
+
+ if (key->encrypted) {
+ /*
+ * Derive encryption key from passphrase and iv/salt:
+ *
+ * - let block A equal MD5(passphrase || iv)
+ * - let block B equal MD5(A || passphrase || iv)
+ * - block C would be MD5(B || passphrase || iv) and so on
+ * - encryption key is the first N bytes of A || B
+ *
+ * (Note that only 8 bytes of the iv are used for key
+ * derivation, even when the key is encrypted with AES and
+ * hence there are 16 bytes available.)
+ */
+ struct MD5Context md5c;
+ unsigned char keybuf[32];
+
+ MD5Init(&md5c);
+ MD5Update(&md5c, (unsigned char *)passphrase, strlen(passphrase));
+ MD5Update(&md5c, (unsigned char *)key->iv, 8);
+ MD5Final(keybuf, &md5c);
+
+ MD5Init(&md5c);
+ MD5Update(&md5c, keybuf, 16);
+ MD5Update(&md5c, (unsigned char *)passphrase, strlen(passphrase));
+ MD5Update(&md5c, (unsigned char *)key->iv, 8);
+ MD5Final(keybuf+16, &md5c);
+
+ /*
+ * Now decrypt the key blob.
+ */
+ if (key->encryption == OP_E_3DES)
+ des3_decrypt_pubkey_ossh(keybuf, (unsigned char *)key->iv,
+ key->keyblob, key->keyblob_len);
+ else {
+ void *ctx;
+ assert(key->encryption == OP_E_AES);
+ ctx = aes_make_context();
+ aes128_key(ctx, keybuf);
+ aes_iv(ctx, (unsigned char *)key->iv);
+ aes_ssh2_decrypt_blk(ctx, key->keyblob, key->keyblob_len);
+ aes_free_context(ctx);
+ }
+
+ smemclr(&md5c, sizeof(md5c));
+ smemclr(keybuf, sizeof(keybuf));
+ }
+
+ /*
+ * Now we have a decrypted key blob, which contains an ASN.1
+ * encoded private key. We must now untangle the ASN.1.
+ *
+ * We expect the whole key blob to be formatted as a SEQUENCE
+ * (0x30 followed by a length code indicating that the rest of
+ * the blob is part of the sequence). Within that SEQUENCE we
+ * expect to see a bunch of INTEGERs. What those integers mean
+ * depends on the key type:
+ *
+ * - For RSA, we expect the integers to be 0, n, e, d, p, q,
+ * dmp1, dmq1, iqmp in that order. (The last three are d mod
+ * (p-1), d mod (q-1), inverse of q mod p respectively.)
+ *
+ * - For DSA, we expect them to be 0, p, q, g, y, x in that
+ * order.
+ *
+ * - In ECDSA the format is totally different: we see the
+ * SEQUENCE, but beneath is an INTEGER 1, OCTET STRING priv
+ * EXPLICIT [0] OID curve, EXPLICIT [1] BIT STRING pubPoint
+ */
+
+ p = key->keyblob;
+
+ /* Expect the SEQUENCE header. Take its absence as a failure to
+ * decrypt, if the key was encrypted. */
+ ret = ber_read_id_len(p, key->keyblob_len, &id, &len, &flags);
+ p += ret;
+ if (ret < 0 || id != 16) {
+ errmsg = "ASN.1 decoding failure";
+ retval = key->encrypted ? SSH2_WRONG_PASSPHRASE : NULL;
+ goto error;
+ }
+
+ /* Expect a load of INTEGERs. */
+ if (key->keytype == OP_RSA)
+ num_integers = 9;
+ else if (key->keytype == OP_DSA)
+ num_integers = 6;
+ else
+ num_integers = 0; /* placate compiler warnings */
+
+
+ if (key->keytype == OP_ECDSA) {
+ /* And now for something completely different */
+ unsigned char *priv;
+ int privlen;
+ const struct ssh_signkey *alg;
+ const struct ec_curve *curve;
+ int algnamelen, curvenamelen;
+ /* Read INTEGER 1 */
+ ret = ber_read_id_len(p, key->keyblob+key->keyblob_len-p,
+ &id, &len, &flags);
+ p += ret;
+ if (ret < 0 || id != 2 || key->keyblob+key->keyblob_len-p < len ||
+ len != 1 || p[0] != 1) {
+ errmsg = "ASN.1 decoding failure";
+ retval = key->encrypted ? SSH2_WRONG_PASSPHRASE : NULL;
+ goto error;
+ }
+ p += 1;
+ /* Read private key OCTET STRING */
+ ret = ber_read_id_len(p, key->keyblob+key->keyblob_len-p,
+ &id, &len, &flags);
+ p += ret;
+ if (ret < 0 || id != 4 || key->keyblob+key->keyblob_len-p < len) {
+ errmsg = "ASN.1 decoding failure";
+ retval = key->encrypted ? SSH2_WRONG_PASSPHRASE : NULL;
+ goto error;
+ }
+ priv = p;
+ privlen = len;
+ p += len;
+ /* Read curve OID */
+ ret = ber_read_id_len(p, key->keyblob+key->keyblob_len-p,
+ &id, &len, &flags);
+ p += ret;
+ if (ret < 0 || id != 0 || key->keyblob+key->keyblob_len-p < len) {
+ errmsg = "ASN.1 decoding failure";
+ retval = key->encrypted ? SSH2_WRONG_PASSPHRASE : NULL;
+ goto error;
+ }
+ ret = ber_read_id_len(p, key->keyblob+key->keyblob_len-p,
+ &id, &len, &flags);
+ p += ret;
+ if (ret < 0 || id != 6 || key->keyblob+key->keyblob_len-p < len) {
+ errmsg = "ASN.1 decoding failure";
+ retval = key->encrypted ? SSH2_WRONG_PASSPHRASE : NULL;
+ goto error;
+ }
+ alg = ec_alg_by_oid(len, p, &curve);
+ if (!alg) {
+ errmsg = "Unsupported ECDSA curve.";
+ retval = NULL;
+ goto error;
+ }
+ p += len;
+ /* Read BIT STRING point */
+ ret = ber_read_id_len(p, key->keyblob+key->keyblob_len-p,
+ &id, &len, &flags);
+ p += ret;
+ if (ret < 0 || id != 1 || key->keyblob+key->keyblob_len-p < len) {
+ errmsg = "ASN.1 decoding failure";
+ retval = key->encrypted ? SSH2_WRONG_PASSPHRASE : NULL;
+ goto error;
+ }
+ ret = ber_read_id_len(p, key->keyblob+key->keyblob_len-p,
+ &id, &len, &flags);
+ p += ret;
+ if (ret < 0 || id != 3 || key->keyblob+key->keyblob_len-p < len ||
+ len != ((((curve->fieldBits + 7) / 8) * 2) + 2)) {
+ errmsg = "ASN.1 decoding failure";
+ retval = key->encrypted ? SSH2_WRONG_PASSPHRASE : NULL;
+ goto error;
+ }
+ p += 1; len -= 1; /* Skip 0x00 before point */
+
+ /* Construct the key */
+ retkey = snew(struct ssh2_userkey);
+ if (!retkey) {
+ errmsg = "out of memory";
+ goto error;
+ }
+ retkey->alg = alg;
+ blob = snewn((4+19 + 4+8 + 4+len) + (4+1+privlen), unsigned char);
+ if (!blob) {
+ sfree(retkey);
+ errmsg = "out of memory";
+ goto error;
+ }
+
+ q = blob;
+
+ algnamelen = strlen(alg->name);
+ PUT_32BIT(q, algnamelen); q += 4;
+ memcpy(q, alg->name, algnamelen); q += algnamelen;
+
+ curvenamelen = strlen(curve->name);
+ PUT_32BIT(q, curvenamelen); q += 4;
+ memcpy(q, curve->name, curvenamelen); q += curvenamelen;
+
+ PUT_32BIT(q, len); q += 4;
+ memcpy(q, p, len); q += len;
+
+ /*
+ * To be acceptable to our createkey(), the private blob must
+ * contain a valid mpint, i.e. without the top bit set. But
+ * the input private string may have the top bit set, so we
+ * prefix a zero byte to ensure createkey() doesn't fail for
+ * that reason.
+ */
+ PUT_32BIT(q, privlen+1);
+ q[4] = 0;
+ memcpy(q+5, priv, privlen);
+
+ retkey->data = retkey->alg->createkey(retkey->alg,
+ blob, q-blob,
+ q, 5+privlen);
+
+ if (!retkey->data) {
+ sfree(retkey);
+ errmsg = "unable to create key data structure";
+ goto error;
+ }
+
+ } else if (key->keytype == OP_RSA || key->keytype == OP_DSA) {
+
+ /*
+ * Space to create key blob in.
+ */
+ blobsize = 256+key->keyblob_len;
+ blob = snewn(blobsize, unsigned char);
+ PUT_32BIT(blob, 7);
+ if (key->keytype == OP_DSA)
+ memcpy(blob+4, "ssh-dss", 7);
+ else if (key->keytype == OP_RSA)
+ memcpy(blob+4, "ssh-rsa", 7);
+ blobptr = 4+7;
+ privptr = -1;
+
+ for (i = 0; i < num_integers; i++) {
+ ret = ber_read_id_len(p, key->keyblob+key->keyblob_len-p,
+ &id, &len, &flags);
+ p += ret;
+ if (ret < 0 || id != 2 ||
+ key->keyblob+key->keyblob_len-p < len) {
+ errmsg = "ASN.1 decoding failure";
+ retval = key->encrypted ? SSH2_WRONG_PASSPHRASE : NULL;
+ goto error;
+ }
+
+ if (i == 0) {
+ /*
+ * The first integer should be zero always (I think
+ * this is some sort of version indication).
+ */
+ if (len != 1 || p[0] != 0) {
+ errmsg = "version number mismatch";
+ goto error;
+ }
+ } else if (key->keytype == OP_RSA) {
+ /*
+ * Integers 1 and 2 go into the public blob but in the
+ * opposite order; integers 3, 4, 5 and 8 go into the
+ * private blob. The other two (6 and 7) are ignored.
+ */
+ if (i == 1) {
+ /* Save the details for after we deal with number 2. */
+ modptr = (char *)p;
+ modlen = len;
+ } else if (i != 6 && i != 7) {
+ PUT_32BIT(blob+blobptr, len);
+ memcpy(blob+blobptr+4, p, len);
+ blobptr += 4+len;
+ if (i == 2) {
+ PUT_32BIT(blob+blobptr, modlen);
+ memcpy(blob+blobptr+4, modptr, modlen);
+ blobptr += 4+modlen;
+ privptr = blobptr;
+ }
+ }
+ } else if (key->keytype == OP_DSA) {
+ /*
+ * Integers 1-4 go into the public blob; integer 5 goes
+ * into the private blob.
+ */
+ PUT_32BIT(blob+blobptr, len);
+ memcpy(blob+blobptr+4, p, len);
+ blobptr += 4+len;
+ if (i == 4)
+ privptr = blobptr;
+ }
+
+ /* Skip past the number. */
+ p += len;
+ }
+
+ /*
+ * Now put together the actual key. Simplest way to do this is
+ * to assemble our own key blobs and feed them to the createkey
+ * functions; this is a bit faffy but it does mean we get all
+ * the sanity checks for free.
+ */
+ assert(privptr > 0); /* should have bombed by now if not */
+ retkey = snew(struct ssh2_userkey);
+ retkey->alg = (key->keytype == OP_RSA ? &ssh_rsa : &ssh_dss);
+ retkey->data = retkey->alg->createkey(retkey->alg, blob, privptr,
+ blob+privptr,
+ blobptr-privptr);
+ if (!retkey->data) {
+ sfree(retkey);
+ errmsg = "unable to create key data structure";
+ goto error;
+ }
+
+ } else {
+ assert(0 && "Bad key type from load_openssh_pem_key");
+ errmsg = "Bad key type from load_openssh_pem_key";
+ goto error;
+ }
+
+ /*
+ * The old key format doesn't include a comment in the private
+ * key file.
+ */
+ retkey->comment = dupstr("imported-openssh-key");
+
+ errmsg = NULL; /* no error */
+ retval = retkey;
+
+ error:
+ if (blob) {
+ smemclr(blob, blobsize);
+ sfree(blob);
+ }
+ smemclr(key->keyblob, key->keyblob_size);
+ sfree(key->keyblob);
+ smemclr(key, sizeof(*key));
+ sfree(key);
+ if (errmsg_p) *errmsg_p = errmsg;
+ return retval;
+}
+
+int openssh_pem_write(const Filename *filename, struct ssh2_userkey *key,
+ char *passphrase)
+{
+ unsigned char *pubblob, *privblob, *spareblob;
+ int publen, privlen, sparelen = 0;
+ unsigned char *outblob;
+ int outlen;
+ struct mpint_pos numbers[9];
+ int nnumbers, pos, len, seqlen, i;
+ const char *header, *footer;
+ char zero[1];
+ unsigned char iv[8];
+ int ret = 0;
+ FILE *fp;
+
+ /*
+ * Fetch the key blobs.
+ */
+ pubblob = key->alg->public_blob(key->data, &publen);
+ privblob = key->alg->private_blob(key->data, &privlen);
+ spareblob = outblob = NULL;
+
+ outblob = NULL;
+ len = 0;
+
+ /*
+ * Encode the OpenSSH key blob, and also decide on the header
+ * line.
+ */
+ if (key->alg == &ssh_rsa || key->alg == &ssh_dss) {
+ /*
+ * The RSA and DSS handlers share some code because the two
+ * key types have very similar ASN.1 representations, as a
+ * plain SEQUENCE of big integers. So we set up a list of
+ * bignums per key type and then construct the actual blob in
+ * common code after that.
+ */
+ if (key->alg == &ssh_rsa) {
+ int pos;
+ struct mpint_pos n, e, d, p, q, iqmp, dmp1, dmq1;
+ Bignum bd, bp, bq, bdmp1, bdmq1;
+
+ /*
+ * These blobs were generated from inside PuTTY, so we needn't
+ * treat them as untrusted.
+ */
+ pos = 4 + GET_32BIT(pubblob);
+ pos += ssh2_read_mpint(pubblob+pos, publen-pos, &e);
+ pos += ssh2_read_mpint(pubblob+pos, publen-pos, &n);
+ pos = 0;
+ pos += ssh2_read_mpint(privblob+pos, privlen-pos, &d);
+ pos += ssh2_read_mpint(privblob+pos, privlen-pos, &p);
+ pos += ssh2_read_mpint(privblob+pos, privlen-pos, &q);
+ pos += ssh2_read_mpint(privblob+pos, privlen-pos, &iqmp);
+
+ assert(e.start && iqmp.start); /* can't go wrong */
+
+ /* We also need d mod (p-1) and d mod (q-1). */
+ bd = bignum_from_bytes(d.start, d.bytes);
+ bp = bignum_from_bytes(p.start, p.bytes);
+ bq = bignum_from_bytes(q.start, q.bytes);
+ decbn(bp);
+ decbn(bq);
+ bdmp1 = bigmod(bd, bp);
+ bdmq1 = bigmod(bd, bq);
+ freebn(bd);
+ freebn(bp);
+ freebn(bq);
+
+ dmp1.bytes = (bignum_bitcount(bdmp1)+8)/8;
+ dmq1.bytes = (bignum_bitcount(bdmq1)+8)/8;
+ sparelen = dmp1.bytes + dmq1.bytes;
+ spareblob = snewn(sparelen, unsigned char);
+ dmp1.start = spareblob;
+ dmq1.start = spareblob + dmp1.bytes;
+ for (i = 0; i < dmp1.bytes; i++)
+ spareblob[i] = bignum_byte(bdmp1, dmp1.bytes-1 - i);
+ for (i = 0; i < dmq1.bytes; i++)
+ spareblob[i+dmp1.bytes] = bignum_byte(bdmq1, dmq1.bytes-1 - i);
+ freebn(bdmp1);
+ freebn(bdmq1);
+
+ numbers[0].start = zero; numbers[0].bytes = 1; zero[0] = '\0';
+ numbers[1] = n;
+ numbers[2] = e;
+ numbers[3] = d;
+ numbers[4] = p;
+ numbers[5] = q;
+ numbers[6] = dmp1;
+ numbers[7] = dmq1;
+ numbers[8] = iqmp;
+
+ nnumbers = 9;
+ header = "-----BEGIN RSA PRIVATE KEY-----\n";
+ footer = "-----END RSA PRIVATE KEY-----\n";
+ } else { /* ssh-dss */
+ int pos;
+ struct mpint_pos p, q, g, y, x;
+
+ /*
+ * These blobs were generated from inside PuTTY, so we needn't
+ * treat them as untrusted.
+ */
+ pos = 4 + GET_32BIT(pubblob);
+ pos += ssh2_read_mpint(pubblob+pos, publen-pos, &p);
+ pos += ssh2_read_mpint(pubblob+pos, publen-pos, &q);
+ pos += ssh2_read_mpint(pubblob+pos, publen-pos, &g);
+ pos += ssh2_read_mpint(pubblob+pos, publen-pos, &y);
+ pos = 0;
+ pos += ssh2_read_mpint(privblob+pos, privlen-pos, &x);
+
+ assert(y.start && x.start); /* can't go wrong */
+
+ numbers[0].start = zero; numbers[0].bytes = 1; zero[0] = '\0';
+ numbers[1] = p;
+ numbers[2] = q;
+ numbers[3] = g;
+ numbers[4] = y;
+ numbers[5] = x;
+
+ nnumbers = 6;
+ header = "-----BEGIN DSA PRIVATE KEY-----\n";
+ footer = "-----END DSA PRIVATE KEY-----\n";
+ }
+
+ /*
+ * Now count up the total size of the ASN.1 encoded integers,
+ * so as to determine the length of the containing SEQUENCE.
+ */
+ len = 0;
+ for (i = 0; i < nnumbers; i++) {
+ len += ber_write_id_len(NULL, 2, numbers[i].bytes, 0);
+ len += numbers[i].bytes;
+ }
+ seqlen = len;
+ /* Now add on the SEQUENCE header. */
+ len += ber_write_id_len(NULL, 16, seqlen, ASN1_CONSTRUCTED);
+
+ /*
+ * Now we know how big outblob needs to be. Allocate it.
+ */
+ outblob = snewn(len, unsigned char);
+
+ /*
+ * And write the data into it.
+ */
+ pos = 0;
+ pos += ber_write_id_len(outblob+pos, 16, seqlen, ASN1_CONSTRUCTED);
+ for (i = 0; i < nnumbers; i++) {
+ pos += ber_write_id_len(outblob+pos, 2, numbers[i].bytes, 0);
+ memcpy(outblob+pos, numbers[i].start, numbers[i].bytes);
+ pos += numbers[i].bytes;
+ }
+ } else if (key->alg == &ssh_ecdsa_nistp256 ||
+ key->alg == &ssh_ecdsa_nistp384 ||
+ key->alg == &ssh_ecdsa_nistp521) {
+ const unsigned char *oid;
+ int oidlen;
+ int pointlen;
+
+ /*
+ * Structure of asn1:
+ * SEQUENCE
+ * INTEGER 1
+ * OCTET STRING (private key)
+ * [0]
+ * OID (curve)
+ * [1]
+ * BIT STRING (0x00 public key point)
+ */
+ oid = ec_alg_oid(key->alg, &oidlen);
+ pointlen = (((struct ec_key *)key->data)->publicKey.curve->fieldBits
+ + 7) / 8 * 2;
+
+ len = ber_write_id_len(NULL, 2, 1, 0);
+ len += 1;
+ len += ber_write_id_len(NULL, 4, privlen - 4, 0);
+ len+= privlen - 4;
+ len += ber_write_id_len(NULL, 0, oidlen +
+ ber_write_id_len(NULL, 6, oidlen, 0),
+ ASN1_CLASS_CONTEXT_SPECIFIC | ASN1_CONSTRUCTED);
+ len += ber_write_id_len(NULL, 6, oidlen, 0);
+ len += oidlen;
+ len += ber_write_id_len(NULL, 1, 2 + pointlen +
+ ber_write_id_len(NULL, 3, 2 + pointlen, 0),
+ ASN1_CLASS_CONTEXT_SPECIFIC | ASN1_CONSTRUCTED);
+ len += ber_write_id_len(NULL, 3, 2 + pointlen, 0);
+ len += 2 + pointlen;
+
+ seqlen = len;
+ len += ber_write_id_len(NULL, 16, seqlen, ASN1_CONSTRUCTED);
+
+ outblob = snewn(len, unsigned char);
+ assert(outblob);
+
+ pos = 0;
+ pos += ber_write_id_len(outblob+pos, 16, seqlen, ASN1_CONSTRUCTED);
+ pos += ber_write_id_len(outblob+pos, 2, 1, 0);
+ outblob[pos++] = 1;
+ pos += ber_write_id_len(outblob+pos, 4, privlen - 4, 0);
+ memcpy(outblob+pos, privblob + 4, privlen - 4);
+ pos += privlen - 4;
+ pos += ber_write_id_len(outblob+pos, 0, oidlen +
+ ber_write_id_len(NULL, 6, oidlen, 0),
+ ASN1_CLASS_CONTEXT_SPECIFIC | ASN1_CONSTRUCTED);
+ pos += ber_write_id_len(outblob+pos, 6, oidlen, 0);
+ memcpy(outblob+pos, oid, oidlen);
+ pos += oidlen;
+ pos += ber_write_id_len(outblob+pos, 1, 2 + pointlen +
+ ber_write_id_len(NULL, 3, 2 + pointlen, 0),
+ ASN1_CLASS_CONTEXT_SPECIFIC | ASN1_CONSTRUCTED);
+ pos += ber_write_id_len(outblob+pos, 3, 2 + pointlen, 0);
+ outblob[pos++] = 0;
+ memcpy(outblob+pos, pubblob+39, 1 + pointlen);
+ pos += 1 + pointlen;
+
+ header = "-----BEGIN EC PRIVATE KEY-----\n";
+ footer = "-----END EC PRIVATE KEY-----\n";
+ } else {
+ assert(0); /* zoinks! */
+ exit(1); /* XXX: GCC doesn't understand assert() on some systems. */
+ }
+
+ /*
+ * Encrypt the key.
+ *
+ * For the moment, we still encrypt our OpenSSH keys using
+ * old-style 3DES.
+ */
+ if (passphrase) {
+ struct MD5Context md5c;
+ unsigned char keybuf[32];
+
+ /*
+ * Round up to the cipher block size, ensuring we have at
+ * least one byte of padding (see below).
+ */
+ outlen = (len+8) &~ 7;
+ {
+ unsigned char *tmp = snewn(outlen, unsigned char);
+ memcpy(tmp, outblob, len);
+ smemclr(outblob, len);
+ sfree(outblob);
+ outblob = tmp;
+ }
+
+ /*
+ * Padding on OpenSSH keys is deterministic. The number of
+ * padding bytes is always more than zero, and always at most
+ * the cipher block length. The value of each padding byte is
+ * equal to the number of padding bytes. So a plaintext that's
+ * an exact multiple of the block size will be padded with 08
+ * 08 08 08 08 08 08 08 (assuming a 64-bit block cipher); a
+ * plaintext one byte less than a multiple of the block size
+ * will be padded with just 01.
+ *
+ * This enables the OpenSSL key decryption function to strip
+ * off the padding algorithmically and return the unpadded
+ * plaintext to the next layer: it looks at the final byte, and
+ * then expects to find that many bytes at the end of the data
+ * with the same value. Those are all removed and the rest is
+ * returned.
+ */
+ assert(pos == len);
+ while (pos < outlen) {
+ outblob[pos++] = outlen - len;
+ }
+
+ /*
+ * Invent an iv. Then derive encryption key from passphrase
+ * and iv/salt:
+ *
+ * - let block A equal MD5(passphrase || iv)
+ * - let block B equal MD5(A || passphrase || iv)
+ * - block C would be MD5(B || passphrase || iv) and so on
+ * - encryption key is the first N bytes of A || B
+ */
+ for (i = 0; i < 8; i++) iv[i] = random_byte();
+
+ MD5Init(&md5c);
+ MD5Update(&md5c, (unsigned char *)passphrase, strlen(passphrase));
+ MD5Update(&md5c, iv, 8);
+ MD5Final(keybuf, &md5c);
+
+ MD5Init(&md5c);
+ MD5Update(&md5c, keybuf, 16);
+ MD5Update(&md5c, (unsigned char *)passphrase, strlen(passphrase));
+ MD5Update(&md5c, iv, 8);
+ MD5Final(keybuf+16, &md5c);
+
+ /*
+ * Now encrypt the key blob.
+ */
+ des3_encrypt_pubkey_ossh(keybuf, iv, outblob, outlen);
+
+ smemclr(&md5c, sizeof(md5c));
+ smemclr(keybuf, sizeof(keybuf));
+ } else {
+ /*
+ * If no encryption, the blob has exactly its original
+ * cleartext size.
+ */
+ outlen = len;
+ }
+
+ /*
+ * And save it. We'll use Unix line endings just in case it's
+ * subsequently transferred in binary mode.
+ */
+ fp = f_open(filename, "wb", TRUE); /* ensure Unix line endings */
+ if (!fp)
+ goto error;
+ fputs(header, fp);
+ if (passphrase) {
+ fprintf(fp, "Proc-Type: 4,ENCRYPTED\nDEK-Info: DES-EDE3-CBC,");
+ for (i = 0; i < 8; i++)
+ fprintf(fp, "%02X", iv[i]);
+ fprintf(fp, "\n\n");
+ }
+ base64_encode(fp, outblob, outlen, 64);
+ fputs(footer, fp);
+ fclose(fp);
+ ret = 1;
+
+ error:
+ if (outblob) {
+ smemclr(outblob, outlen);
+ sfree(outblob);
+ }
+ if (spareblob) {
+ smemclr(spareblob, sparelen);
+ sfree(spareblob);
+ }
+ if (privblob) {
+ smemclr(privblob, privlen);
+ sfree(privblob);
+ }
+ if (pubblob) {
+ smemclr(pubblob, publen);
+ sfree(pubblob);
+ }
+ return ret;
+}
+
+/* ----------------------------------------------------------------------
+ * Code to read and write OpenSSH private keys in the new-style format.
+ */
+
+typedef enum {
+ ON_E_NONE, ON_E_AES256CBC
+} openssh_new_cipher;
+typedef enum {
+ ON_K_NONE, ON_K_BCRYPT
+} openssh_new_kdf;
+
+struct openssh_new_key {
+ openssh_new_cipher cipher;
+ openssh_new_kdf kdf;
+ union {
+ struct {
+ int rounds;
+ /* This points to a position within keyblob, not a
+ * separately allocated thing */
+ const unsigned char *salt;
+ int saltlen;
+ } bcrypt;
+ } kdfopts;
+ int nkeys, key_wanted;
+ /* This too points to a position within keyblob */
+ unsigned char *privatestr;
+ int privatelen;
+
+ unsigned char *keyblob;
+ int keyblob_len, keyblob_size;
+};
+
+static struct openssh_new_key *load_openssh_new_key(const Filename *filename,
+ const char **errmsg_p)
+{
+ struct openssh_new_key *ret;
+ FILE *fp = NULL;
+ char *line = NULL;
+ const char *errmsg;
+ char *p;
+ char base64_bit[4];
+ int base64_chars = 0;
+ const void *filedata;
+ int filelen;
+ const void *string, *kdfopts, *bcryptsalt, *pubkey;
+ int stringlen, kdfoptlen, bcryptsaltlen, pubkeylen;
+ unsigned bcryptrounds, nkeys, key_index;
+
+ ret = snew(struct openssh_new_key);
+ ret->keyblob = NULL;
+ ret->keyblob_len = ret->keyblob_size = 0;
+
+ fp = f_open(filename, "r", FALSE);
+ if (!fp) {
+ errmsg = "unable to open key file";
+ goto error;
+ }
+
+ if (!(line = fgetline(fp))) {
+ errmsg = "unexpected end of file";
+ goto error;
+ }
+ strip_crlf(line);
+ if (0 != strcmp(line, "-----BEGIN OPENSSH PRIVATE KEY-----")) {
+ errmsg = "file does not begin with OpenSSH new-style key header";
+ goto error;
+ }
+ smemclr(line, strlen(line));
+ sfree(line);
+ line = NULL;
+
+ while (1) {
+ if (!(line = fgetline(fp))) {
+ errmsg = "unexpected end of file";
+ goto error;
+ }
+ strip_crlf(line);
+ if (0 == strcmp(line, "-----END OPENSSH PRIVATE KEY-----")) {
+ sfree(line);
+ line = NULL;
+ break; /* done */
+ }
+
+ p = line;
+ while (isbase64(*p)) {
+ base64_bit[base64_chars++] = *p;
+ if (base64_chars == 4) {
+ unsigned char out[3];
+ int len;
+
+ base64_chars = 0;
+
+ len = base64_decode_atom(base64_bit, out);
+
+ if (len <= 0) {
+ errmsg = "invalid base64 encoding";
+ goto error;
+ }
+
+ if (ret->keyblob_len + len > ret->keyblob_size) {
+ ret->keyblob_size = ret->keyblob_len + len + 256;
+ ret->keyblob = sresize(ret->keyblob, ret->keyblob_size,
+ unsigned char);
+ }
+
+ memcpy(ret->keyblob + ret->keyblob_len, out, len);
+ ret->keyblob_len += len;
+
+ smemclr(out, sizeof(out));
+ }
+
+ p++;
+ }
+ smemclr(line, strlen(line));
+ sfree(line);
+ line = NULL;
+ }
+
+ fclose(fp);
+ fp = NULL;
+
+ if (ret->keyblob_len == 0 || !ret->keyblob) {
+ errmsg = "key body not present";
+ goto error;
+ }
+
+ filedata = ret->keyblob;
+ filelen = ret->keyblob_len;
+
+ if (filelen < 15 || 0 != memcmp(filedata, "openssh-key-v1\0", 15)) {
+ errmsg = "new-style OpenSSH magic number missing\n";
+ goto error;
+ }
+ filedata = (const char *)filedata + 15;
+ filelen -= 15;
+
+ if (!(string = get_ssh_string(&filelen, &filedata, &stringlen))) {
+ errmsg = "encountered EOF before cipher name\n";
+ goto error;
+ }
+ if (match_ssh_id(stringlen, string, "none")) {
+ ret->cipher = ON_E_NONE;
+ } else if (match_ssh_id(stringlen, string, "aes256-cbc")) {
+ ret->cipher = ON_E_AES256CBC;
+ } else {
+ errmsg = "unrecognised cipher name\n";
+ goto error;
+ }
+
+ if (!(string = get_ssh_string(&filelen, &filedata, &stringlen))) {
+ errmsg = "encountered EOF before kdf name\n";
+ goto error;
+ }
+ if (match_ssh_id(stringlen, string, "none")) {
+ ret->kdf = ON_K_NONE;
+ } else if (match_ssh_id(stringlen, string, "bcrypt")) {
+ ret->kdf = ON_K_BCRYPT;
+ } else {
+ errmsg = "unrecognised kdf name\n";
+ goto error;
+ }
+
+ if (!(kdfopts = get_ssh_string(&filelen, &filedata, &kdfoptlen))) {
+ errmsg = "encountered EOF before kdf options\n";
+ goto error;
+ }
+ switch (ret->kdf) {
+ case ON_K_NONE:
+ if (kdfoptlen != 0) {
+ errmsg = "expected empty options string for 'none' kdf";
+ goto error;
+ }
+ break;
+ case ON_K_BCRYPT:
+ if (!(bcryptsalt = get_ssh_string(&kdfoptlen, &kdfopts,
+ &bcryptsaltlen))) {
+ errmsg = "bcrypt options string did not contain salt\n";
+ goto error;
+ }
+ if (!get_ssh_uint32(&kdfoptlen, &kdfopts, &bcryptrounds)) {
+ errmsg = "bcrypt options string did not contain round count\n";
+ goto error;
+ }
+ ret->kdfopts.bcrypt.salt = bcryptsalt;
+ ret->kdfopts.bcrypt.saltlen = bcryptsaltlen;
+ ret->kdfopts.bcrypt.rounds = bcryptrounds;
+ break;
+ }
+
+ /*
+ * At this point we expect a uint32 saying how many keys are
+ * stored in this file. OpenSSH new-style key files can
+ * contain more than one. Currently we don't have any user
+ * interface to specify which one we're trying to extract, so
+ * we just bomb out with an error if more than one is found in
+ * the file. However, I've put in all the mechanism here to
+ * extract the nth one for a given n, in case we later connect
+ * up some UI to that mechanism. Just arrange that the
+ * 'key_wanted' field is set to a value in the range [0,
+ * nkeys) by some mechanism.
+ */
+ if (!get_ssh_uint32(&filelen, &filedata, &nkeys)) {
+ errmsg = "encountered EOF before key count\n";
+ goto error;
+ }
+ if (nkeys != 1) {
+ errmsg = "multiple keys in new-style OpenSSH key file "
+ "not supported\n";
+ goto error;
+ }
+ ret->nkeys = nkeys;
+ ret->key_wanted = 0;
+
+ for (key_index = 0; key_index < nkeys; key_index++) {
+ if (!(pubkey = get_ssh_string(&filelen, &filedata, &pubkeylen))) {
+ errmsg = "encountered EOF before kdf options\n";
+ goto error;
+ }
+ }
+
+ /*
+ * Now we expect a string containing the encrypted part of the
+ * key file.
+ */
+ if (!(string = get_ssh_string(&filelen, &filedata, &stringlen))) {
+ errmsg = "encountered EOF before private key container\n";
+ goto error;
+ }
+ ret->privatestr = (unsigned char *)string;
+ ret->privatelen = stringlen;
+
+ /*
+ * And now we're done, until asked to actually decrypt.
+ */