+static struct Packet *s_wrpkt_start(int type, int len)
+{
+ struct Packet *pkt = ssh_new_packet();
+ ssh1_pktout_size(pkt, len);
+ pkt->type = type;
+ /* Initialise log omission state */
+ pkt->nblanks = 0;
+ pkt->blanks = NULL;
+ return pkt;
+}
+
+static int s_wrpkt_prepare(Ssh ssh, struct Packet *pkt)
+{
+ int pad, biglen, i;
+ unsigned long crc;
+#ifdef __SC__
+ /*
+ * XXX various versions of SC (including 8.8.4) screw up the
+ * register allocation in this function and use the same register
+ * (D6) for len and as a temporary, with predictable results. The
+ * following sledgehammer prevents this.
+ */
+ volatile
+#endif
+ int len;
+
+ pkt->body[-1] = pkt->type;
+
+ if (ssh->logctx)
+ log_packet(ssh->logctx, PKT_OUTGOING, pkt->type,
+ ssh1_pkt_type(pkt->type),
+ pkt->body, pkt->length,
+ pkt->nblanks, pkt->blanks);
+ sfree(pkt->blanks); pkt->blanks = NULL;
+ pkt->nblanks = 0;
+
+ if (ssh->v1_compressing) {
+ unsigned char *compblk;
+ int complen;
+ zlib_compress_block(ssh->cs_comp_ctx,
+ pkt->body - 1, pkt->length + 1,
+ &compblk, &complen);
+ ssh1_pktout_size(pkt, complen - 1);
+ memcpy(pkt->body - 1, compblk, complen);
+ sfree(compblk);
+ }
+
+ len = pkt->length + 5; /* type and CRC */
+ pad = 8 - (len % 8);
+ biglen = len + pad;
+
+ for (i = 0; i < pad; i++)
+ pkt->data[i + 4] = random_byte();
+ crc = crc32_compute(pkt->data + 4, biglen - 4);
+ PUT_32BIT(pkt->data + biglen, crc);
+ PUT_32BIT(pkt->data, len);
+
+ if (ssh->cipher)
+ ssh->cipher->encrypt(ssh->v1_cipher_ctx, pkt->data + 4, biglen);
+
+ return biglen + 4;
+}
+
+static void s_wrpkt(Ssh ssh, struct Packet *pkt)
+{
+ int len, backlog;
+ len = s_wrpkt_prepare(ssh, pkt);
+ backlog = sk_write(ssh->s, (char *)pkt->data, len);
+ if (backlog > SSH_MAX_BACKLOG)
+ ssh_throttle_all(ssh, 1, backlog);
+}
+
+static void s_wrpkt_defer(Ssh ssh, struct Packet *pkt)
+{
+ int len;
+ len = s_wrpkt_prepare(ssh, pkt);
+ if (ssh->deferred_len + len > ssh->deferred_size) {
+ ssh->deferred_size = ssh->deferred_len + len + 128;
+ ssh->deferred_send_data = sresize(ssh->deferred_send_data,
+ ssh->deferred_size,
+ unsigned char);
+ }
+ memcpy(ssh->deferred_send_data + ssh->deferred_len, pkt->data, len);
+ ssh->deferred_len += len;
+}
+
+/*
+ * Construct a packet with the specified contents.
+ */
+static struct Packet *construct_packet(Ssh ssh, int pkttype,
+ va_list ap1, va_list ap2)
+{
+ unsigned char *p, *argp, argchar;
+ unsigned long argint;
+ int pktlen, argtype, arglen;
+ Bignum bn;
+ struct Packet *pkt;
+
+ pktlen = 0;
+ while ((argtype = va_arg(ap1, int)) != PKT_END) {
+ switch (argtype) {
+ case PKT_INT:
+ (void) va_arg(ap1, int);
+ pktlen += 4;
+ break;
+ case PKT_CHAR:
+ (void) va_arg(ap1, int);
+ pktlen++;
+ break;
+ case PKT_DATA:
+ (void) va_arg(ap1, unsigned char *);
+ arglen = va_arg(ap1, int);
+ pktlen += arglen;
+ break;
+ case PKT_STR:
+ argp = va_arg(ap1, unsigned char *);
+ arglen = strlen((char *)argp);
+ pktlen += 4 + arglen;
+ break;
+ case PKT_BIGNUM:
+ bn = va_arg(ap1, Bignum);
+ pktlen += ssh1_bignum_length(bn);
+ break;
+ case PKTT_PASSWORD:
+ case PKTT_DATA:
+ case PKTT_OTHER:
+ /* ignore this pass */
+ break;
+ default:
+ assert(0);
+ }
+ }
+
+ pkt = s_wrpkt_start(pkttype, pktlen);
+ p = pkt->body;
+
+ while ((argtype = va_arg(ap2, int)) != PKT_END) {
+ int offset = p - pkt->body, len = 0;
+ switch (argtype) {
+ /* Actual fields in the packet */
+ case PKT_INT:
+ argint = va_arg(ap2, int);
+ PUT_32BIT(p, argint);
+ len = 4;
+ break;
+ case PKT_CHAR:
+ argchar = (unsigned char) va_arg(ap2, int);
+ *p = argchar;
+ len = 1;
+ break;
+ case PKT_DATA:
+ argp = va_arg(ap2, unsigned char *);
+ arglen = va_arg(ap2, int);
+ memcpy(p, argp, arglen);
+ len = arglen;
+ break;
+ case PKT_STR:
+ argp = va_arg(ap2, unsigned char *);
+ arglen = strlen((char *)argp);
+ PUT_32BIT(p, arglen);
+ memcpy(p + 4, argp, arglen);
+ len = arglen + 4;
+ break;
+ case PKT_BIGNUM:
+ bn = va_arg(ap2, Bignum);
+ len = ssh1_write_bignum(p, bn);
+ break;
+ /* Tokens for modifications to packet logging */
+ case PKTT_PASSWORD:
+ dont_log_password(ssh, pkt, PKTLOG_BLANK);
+ break;
+ case PKTT_DATA:
+ dont_log_data(ssh, pkt, PKTLOG_OMIT);
+ break;
+ case PKTT_OTHER:
+ end_log_omission(ssh, pkt);
+ break;
+ }
+ p += len;
+ /* Deal with logfile omission, if required. */
+ if (len && (pkt->logmode != PKTLOG_EMIT)) {
+ pkt->nblanks++;
+ pkt->blanks = sresize(pkt->blanks, pkt->nblanks,
+ struct logblank_t);
+ pkt->blanks[pkt->nblanks-1].offset = offset;
+ pkt->blanks[pkt->nblanks-1].len = len;
+ pkt->blanks[pkt->nblanks-1].type = pkt->logmode;
+ }
+ }
+
+ return pkt;
+}
+
+static void send_packet(Ssh ssh, int pkttype, ...)
+{
+ struct Packet *pkt;
+ va_list ap1, ap2;
+ va_start(ap1, pkttype);
+ va_start(ap2, pkttype);
+ pkt = construct_packet(ssh, pkttype, ap1, ap2);
+ va_end(ap2);
+ va_end(ap1);
+ s_wrpkt(ssh, pkt);
+ ssh_free_packet(pkt);
+}
+
+static void defer_packet(Ssh ssh, int pkttype, ...)
+{
+ struct Packet *pkt;
+ va_list ap1, ap2;
+ va_start(ap1, pkttype);
+ va_start(ap2, pkttype);
+ pkt = construct_packet(ssh, pkttype, ap1, ap2);
+ va_end(ap2);
+ va_end(ap1);
+ s_wrpkt_defer(ssh, pkt);
+ ssh_free_packet(pkt);
+}
+
+static int ssh_versioncmp(char *a, char *b)
+{
+ char *ae, *be;
+ unsigned long av, bv;
+
+ av = strtoul(a, &ae, 10);
+ bv = strtoul(b, &be, 10);
+ if (av != bv)
+ return (av < bv ? -1 : +1);
+ if (*ae == '.')
+ ae++;
+ if (*be == '.')
+ be++;
+ av = strtoul(ae, &ae, 10);
+ bv = strtoul(be, &be, 10);
+ if (av != bv)
+ return (av < bv ? -1 : +1);
+ return 0;
+}
+
+/*
+ * Utility routines for putting an SSH-protocol `string' and
+ * `uint32' into a SHA state.
+ */
+#include <stdio.h>
+static void sha_string(SHA_State * s, void *str, int len)
+{
+ unsigned char lenblk[4];
+ PUT_32BIT(lenblk, len);
+ SHA_Bytes(s, lenblk, 4);
+ SHA_Bytes(s, str, len);
+}
+
+static void sha_uint32(SHA_State * s, unsigned i)
+{
+ unsigned char intblk[4];
+ PUT_32BIT(intblk, i);
+ SHA_Bytes(s, intblk, 4);
+}
+
+/*
+ * SSH2 packet construction functions.
+ */
+static void ssh2_pkt_ensure(struct Packet *pkt, int length)
+{
+ if (pkt->maxlen < length) {
+ pkt->maxlen = length + 256;
+ pkt->data = sresize(pkt->data, pkt->maxlen + APIEXTRA, unsigned char);
+ }
+}
+static void ssh2_pkt_adddata(struct Packet *pkt, void *data, int len)
+{
+ if (pkt->logmode != PKTLOG_EMIT) {
+ pkt->nblanks++;
+ pkt->blanks = sresize(pkt->blanks, pkt->nblanks, struct logblank_t);
+ pkt->blanks[pkt->nblanks-1].offset = pkt->length - 6;
+ pkt->blanks[pkt->nblanks-1].len = len;
+ pkt->blanks[pkt->nblanks-1].type = pkt->logmode;
+ }
+ pkt->length += len;
+ ssh2_pkt_ensure(pkt, pkt->length);
+ memcpy(pkt->data + pkt->length - len, data, len);
+}
+static void ssh2_pkt_addbyte(struct Packet *pkt, unsigned char byte)
+{
+ ssh2_pkt_adddata(pkt, &byte, 1);
+}
+static struct Packet *ssh2_pkt_init(int pkt_type)
+{
+ struct Packet *pkt = ssh_new_packet();
+ pkt->length = 5;
+ ssh2_pkt_addbyte(pkt, (unsigned char) pkt_type);
+ return pkt;
+}
+static void ssh2_pkt_addbool(struct Packet *pkt, unsigned char value)
+{
+ ssh2_pkt_adddata(pkt, &value, 1);
+}
+static void ssh2_pkt_adduint32(struct Packet *pkt, unsigned long value)
+{
+ unsigned char x[4];
+ PUT_32BIT(x, value);
+ ssh2_pkt_adddata(pkt, x, 4);
+}
+static void ssh2_pkt_addstring_start(struct Packet *pkt)
+{
+ ssh2_pkt_adduint32(pkt, 0);
+ pkt->savedpos = pkt->length;
+}
+static void ssh2_pkt_addstring_str(struct Packet *pkt, char *data)
+{
+ ssh2_pkt_adddata(pkt, data, strlen(data));
+ PUT_32BIT(pkt->data + pkt->savedpos - 4, pkt->length - pkt->savedpos);
+}
+static void ssh2_pkt_addstring_data(struct Packet *pkt, char *data, int len)
+{
+ ssh2_pkt_adddata(pkt, data, len);
+ PUT_32BIT(pkt->data + pkt->savedpos - 4, pkt->length - pkt->savedpos);
+}
+static void ssh2_pkt_addstring(struct Packet *pkt, char *data)
+{
+ ssh2_pkt_addstring_start(pkt);
+ ssh2_pkt_addstring_str(pkt, data);
+}
+static unsigned char *ssh2_mpint_fmt(Bignum b, int *len)
+{
+ unsigned char *p;
+ int i, n = (bignum_bitcount(b) + 7) / 8;
+ p = snewn(n + 1, unsigned char);
+ if (!p)
+ fatalbox("out of memory");
+ p[0] = 0;
+ for (i = 1; i <= n; i++)
+ p[i] = bignum_byte(b, n - i);
+ i = 0;
+ while (i <= n && p[i] == 0 && (p[i + 1] & 0x80) == 0)
+ i++;
+ memmove(p, p + i, n + 1 - i);
+ *len = n + 1 - i;
+ return p;
+}
+static void ssh2_pkt_addmp(struct Packet *pkt, Bignum b)
+{
+ unsigned char *p;
+ int len;
+ p = ssh2_mpint_fmt(b, &len);
+ ssh2_pkt_addstring_start(pkt);
+ ssh2_pkt_addstring_data(pkt, (char *)p, len);
+ sfree(p);
+}
+
+/*
+ * Construct an SSH2 final-form packet: compress it, encrypt it,
+ * put the MAC on it. Final packet, ready to be sent, is stored in
+ * pkt->data. Total length is returned.
+ */
+static int ssh2_pkt_construct(Ssh ssh, struct Packet *pkt)
+{
+ int cipherblk, maclen, padding, i;
+
+ if (ssh->logctx)
+ log_packet(ssh->logctx, PKT_OUTGOING, pkt->data[5],
+ ssh2_pkt_type(ssh->pkt_ctx, pkt->data[5]),
+ pkt->data + 6, pkt->length - 6,
+ pkt->nblanks, pkt->blanks);
+ sfree(pkt->blanks); pkt->blanks = NULL;
+ pkt->nblanks = 0;
+
+ /*
+ * Compress packet payload.
+ */
+ {
+ unsigned char *newpayload;
+ int newlen;
+ if (ssh->cscomp &&
+ ssh->cscomp->compress(ssh->cs_comp_ctx, pkt->data + 5,
+ pkt->length - 5,
+ &newpayload, &newlen)) {
+ pkt->length = 5;
+ ssh2_pkt_adddata(pkt, newpayload, newlen);
+ sfree(newpayload);
+ }
+ }
+
+ /*
+ * Add padding. At least four bytes, and must also bring total
+ * length (minus MAC) up to a multiple of the block size.
+ */
+ cipherblk = ssh->cscipher ? ssh->cscipher->blksize : 8; /* block size */
+ cipherblk = cipherblk < 8 ? 8 : cipherblk; /* or 8 if blksize < 8 */
+ padding = 4;
+ padding +=
+ (cipherblk - (pkt->length + padding) % cipherblk) % cipherblk;
+ maclen = ssh->csmac ? ssh->csmac->len : 0;
+ ssh2_pkt_ensure(pkt, pkt->length + padding + maclen);
+ pkt->data[4] = padding;
+ for (i = 0; i < padding; i++)
+ pkt->data[pkt->length + i] = random_byte();
+ PUT_32BIT(pkt->data, pkt->length + padding - 4);
+ if (ssh->csmac)
+ ssh->csmac->generate(ssh->cs_mac_ctx, pkt->data,
+ pkt->length + padding,
+ ssh->v2_outgoing_sequence);
+ ssh->v2_outgoing_sequence++; /* whether or not we MACed */
+
+ if (ssh->cscipher)
+ ssh->cscipher->encrypt(ssh->cs_cipher_ctx,
+ pkt->data, pkt->length + padding);
+
+ pkt->encrypted_len = pkt->length + padding;
+
+ /* Ready-to-send packet starts at pkt->data. We return length. */
+ return pkt->length + padding + maclen;
+}
+
+/*
+ * Routines called from the main SSH code to send packets. There
+ * are quite a few of these, because we have two separate
+ * mechanisms for delaying the sending of packets:
+ *
+ * - In order to send an IGNORE message and a password message in
+ * a single fixed-length blob, we require the ability to
+ * concatenate the encrypted forms of those two packets _into_ a
+ * single blob and then pass it to our <network.h> transport
+ * layer in one go. Hence, there's a deferment mechanism which
+ * works after packet encryption.
+ *
+ * - In order to avoid sending any connection-layer messages
+ * during repeat key exchange, we have to queue up any such
+ * outgoing messages _before_ they are encrypted (and in
+ * particular before they're allocated sequence numbers), and
+ * then send them once we've finished.
+ *
+ * I call these mechanisms `defer' and `queue' respectively, so as
+ * to distinguish them reasonably easily.
+ *
+ * The functions send_noqueue() and defer_noqueue() free the packet
+ * structure they are passed. Every outgoing packet goes through
+ * precisely one of these functions in its life; packets passed to
+ * ssh2_pkt_send() or ssh2_pkt_defer() either go straight to one of
+ * these or get queued, and then when the queue is later emptied
+ * the packets are all passed to defer_noqueue().
+ */
+
+/*
+ * Send an SSH2 packet immediately, without queuing or deferring.
+ */
+static void ssh2_pkt_send_noqueue(Ssh ssh, struct Packet *pkt)
+{
+ int len;
+ int backlog;
+ len = ssh2_pkt_construct(ssh, pkt);
+ backlog = sk_write(ssh->s, (char *)pkt->data, len);
+ if (backlog > SSH_MAX_BACKLOG)
+ ssh_throttle_all(ssh, 1, backlog);
+
+ ssh->outgoing_data_size += pkt->encrypted_len;
+ if (!ssh->kex_in_progress &&
+ ssh->outgoing_data_size > MAX_DATA_BEFORE_REKEY)
+ do_ssh2_transport(ssh, "Initiating key re-exchange "
+ "(too much data sent)", -1, NULL);
+
+ ssh_free_packet(pkt);
+}
+
+/*
+ * Defer an SSH2 packet.
+ */
+static void ssh2_pkt_defer_noqueue(Ssh ssh, struct Packet *pkt)
+{
+ int len = ssh2_pkt_construct(ssh, pkt);
+ if (ssh->deferred_len + len > ssh->deferred_size) {
+ ssh->deferred_size = ssh->deferred_len + len + 128;
+ ssh->deferred_send_data = sresize(ssh->deferred_send_data,
+ ssh->deferred_size,
+ unsigned char);
+ }
+ memcpy(ssh->deferred_send_data + ssh->deferred_len, pkt->data, len);
+ ssh->deferred_len += len;
+ ssh->deferred_data_size += pkt->encrypted_len;
+ ssh_free_packet(pkt);
+}
+
+/*
+ * Queue an SSH2 packet.
+ */
+static void ssh2_pkt_queue(Ssh ssh, struct Packet *pkt)
+{
+ assert(ssh->queueing);
+
+ if (ssh->queuelen >= ssh->queuesize) {
+ ssh->queuesize = ssh->queuelen + 32;
+ ssh->queue = sresize(ssh->queue, ssh->queuesize, struct Packet *);
+ }
+
+ ssh->queue[ssh->queuelen++] = pkt;
+}
+
+/*
+ * Either queue or send a packet, depending on whether queueing is
+ * set.
+ */
+static void ssh2_pkt_send(Ssh ssh, struct Packet *pkt)
+{
+ if (ssh->queueing)
+ ssh2_pkt_queue(ssh, pkt);
+ else
+ ssh2_pkt_send_noqueue(ssh, pkt);
+}
+
+/*
+ * Either queue or defer a packet, depending on whether queueing is
+ * set.
+ */
+static void ssh2_pkt_defer(Ssh ssh, struct Packet *pkt)
+{
+ if (ssh->queueing)
+ ssh2_pkt_queue(ssh, pkt);
+ else
+ ssh2_pkt_defer_noqueue(ssh, pkt);
+}
+
+/*
+ * Send the whole deferred data block constructed by
+ * ssh2_pkt_defer() or SSH1's defer_packet().
+ *
+ * The expected use of the defer mechanism is that you call
+ * ssh2_pkt_defer() a few times, then call ssh_pkt_defersend(). If
+ * not currently queueing, this simply sets up deferred_send_data
+ * and then sends it. If we _are_ currently queueing, the calls to
+ * ssh2_pkt_defer() put the deferred packets on to the queue
+ * instead, and therefore ssh_pkt_defersend() has no deferred data
+ * to send. Hence, there's no need to make it conditional on
+ * ssh->queueing.
+ */
+static void ssh_pkt_defersend(Ssh ssh)
+{
+ int backlog;
+ backlog = sk_write(ssh->s, (char *)ssh->deferred_send_data,
+ ssh->deferred_len);
+ ssh->deferred_len = ssh->deferred_size = 0;
+ sfree(ssh->deferred_send_data);
+ ssh->deferred_send_data = NULL;
+ if (backlog > SSH_MAX_BACKLOG)
+ ssh_throttle_all(ssh, 1, backlog);
+
+ ssh->outgoing_data_size += ssh->deferred_data_size;
+ if (!ssh->kex_in_progress &&
+ ssh->outgoing_data_size > MAX_DATA_BEFORE_REKEY)
+ do_ssh2_transport(ssh, "Initiating key re-exchange "
+ "(too much data sent)", -1, NULL);
+ ssh->deferred_data_size = 0;
+}
+
+/*
+ * Send all queued SSH2 packets. We send them by means of
+ * ssh2_pkt_defer_noqueue(), in case they included a pair of
+ * packets that needed to be lumped together.
+ */
+static void ssh2_pkt_queuesend(Ssh ssh)
+{
+ int i;
+
+ assert(!ssh->queueing);
+
+ for (i = 0; i < ssh->queuelen; i++)
+ ssh2_pkt_defer_noqueue(ssh, ssh->queue[i]);
+ ssh->queuelen = 0;
+
+ ssh_pkt_defersend(ssh);
+}
+
+#if 0
+void bndebug(char *string, Bignum b)
+{
+ unsigned char *p;
+ int i, len;
+ p = ssh2_mpint_fmt(b, &len);
+ debug(("%s", string));
+ for (i = 0; i < len; i++)
+ debug((" %02x", p[i]));
+ debug(("\n"));
+ sfree(p);
+}
+#endif
+
+static void sha_mpint(SHA_State * s, Bignum b)
+{
+ unsigned char *p;
+ int len;
+ p = ssh2_mpint_fmt(b, &len);
+ sha_string(s, p, len);
+ sfree(p);
+}
+
+/*
+ * Packet decode functions for both SSH1 and SSH2.
+ */
+static unsigned long ssh_pkt_getuint32(struct Packet *pkt)
+{
+ unsigned long value;
+ if (pkt->length - pkt->savedpos < 4)
+ return 0; /* arrgh, no way to decline (FIXME?) */
+ value = GET_32BIT(pkt->body + pkt->savedpos);
+ pkt->savedpos += 4;
+ return value;
+}
+static int ssh2_pkt_getbool(struct Packet *pkt)
+{
+ unsigned long value;
+ if (pkt->length - pkt->savedpos < 1)
+ return 0; /* arrgh, no way to decline (FIXME?) */
+ value = pkt->body[pkt->savedpos] != 0;
+ pkt->savedpos++;
+ return value;
+}
+static void ssh_pkt_getstring(struct Packet *pkt, char **p, int *length)
+{
+ int len;
+ *p = NULL;
+ *length = 0;
+ if (pkt->length - pkt->savedpos < 4)
+ return;
+ len = GET_32BIT(pkt->body + pkt->savedpos);
+ if (len < 0)
+ return;
+ *length = len;
+ pkt->savedpos += 4;
+ if (pkt->length - pkt->savedpos < *length)
+ return;
+ *p = (char *)(pkt->body + pkt->savedpos);
+ pkt->savedpos += *length;
+}
+static void *ssh_pkt_getdata(struct Packet *pkt, int length)
+{
+ if (pkt->length - pkt->savedpos < length)
+ return NULL;
+ pkt->savedpos += length;
+ return pkt->body + (pkt->savedpos - length);
+}
+static int ssh1_pkt_getrsakey(struct Packet *pkt, struct RSAKey *key,
+ unsigned char **keystr)
+{
+ int j;
+
+ j = makekey(pkt->body + pkt->savedpos,
+ pkt->length - pkt->savedpos,
+ key, keystr, 0);
+
+ if (j < 0)
+ return FALSE;
+
+ pkt->savedpos += j;
+ assert(pkt->savedpos < pkt->length);
+
+ return TRUE;
+}
+static Bignum ssh1_pkt_getmp(struct Packet *pkt)
+{
+ int j;
+ Bignum b;
+
+ j = ssh1_read_bignum(pkt->body + pkt->savedpos,
+ pkt->length - pkt->savedpos, &b);
+
+ if (j < 0)
+ return NULL;
+
+ pkt->savedpos += j;
+ return b;
+}
+static Bignum ssh2_pkt_getmp(struct Packet *pkt)
+{
+ char *p;
+ int length;
+ Bignum b;
+
+ ssh_pkt_getstring(pkt, &p, &length);
+ if (!p)
+ return NULL;
+ if (p[0] & 0x80)
+ return NULL;
+ b = bignum_from_bytes((unsigned char *)p, length);
+ return b;
+}
+
+/*
+ * Helper function to add an SSH2 signature blob to a packet.
+ * Expects to be shown the public key blob as well as the signature
+ * blob. Normally works just like ssh2_pkt_addstring, but will
+ * fiddle with the signature packet if necessary for
+ * BUG_SSH2_RSA_PADDING.
+ */
+static void ssh2_add_sigblob(Ssh ssh, struct Packet *pkt,
+ void *pkblob_v, int pkblob_len,
+ void *sigblob_v, int sigblob_len)
+{
+ unsigned char *pkblob = (unsigned char *)pkblob_v;
+ unsigned char *sigblob = (unsigned char *)sigblob_v;
+
+ /* dmemdump(pkblob, pkblob_len); */
+ /* dmemdump(sigblob, sigblob_len); */
+
+ /*
+ * See if this is in fact an ssh-rsa signature and a buggy
+ * server; otherwise we can just do this the easy way.
+ */
+ if ((ssh->remote_bugs & BUG_SSH2_RSA_PADDING) &&
+ (GET_32BIT(pkblob) == 7 && !memcmp(pkblob+4, "ssh-rsa", 7))) {
+ int pos, len, siglen;
+
+ /*
+ * Find the byte length of the modulus.
+ */
+
+ pos = 4+7; /* skip over "ssh-rsa" */
+ pos += 4 + GET_32BIT(pkblob+pos); /* skip over exponent */
+ len = GET_32BIT(pkblob+pos); /* find length of modulus */
+ pos += 4; /* find modulus itself */
+ while (len > 0 && pkblob[pos] == 0)
+ len--, pos++;
+ /* debug(("modulus length is %d\n", len)); */
+
+ /*
+ * Now find the signature integer.
+ */
+ pos = 4+7; /* skip over "ssh-rsa" */
+ siglen = GET_32BIT(sigblob+pos);
+ /* debug(("signature length is %d\n", siglen)); */
+
+ if (len != siglen) {
+ unsigned char newlen[4];
+ ssh2_pkt_addstring_start(pkt);
+ ssh2_pkt_addstring_data(pkt, (char *)sigblob, pos);
+ /* dmemdump(sigblob, pos); */
+ pos += 4; /* point to start of actual sig */
+ PUT_32BIT(newlen, len);
+ ssh2_pkt_addstring_data(pkt, (char *)newlen, 4);
+ /* dmemdump(newlen, 4); */
+ newlen[0] = 0;
+ while (len-- > siglen) {
+ ssh2_pkt_addstring_data(pkt, (char *)newlen, 1);
+ /* dmemdump(newlen, 1); */
+ }
+ ssh2_pkt_addstring_data(pkt, (char *)(sigblob+pos), siglen);
+ /* dmemdump(sigblob+pos, siglen); */
+ return;
+ }
+
+ /* Otherwise fall through and do it the easy way. */
+ }
+
+ ssh2_pkt_addstring_start(pkt);
+ ssh2_pkt_addstring_data(pkt, (char *)sigblob, sigblob_len);
+}
+
+/*
+ * Examine the remote side's version string and compare it against
+ * a list of known buggy implementations.
+ */
+static void ssh_detect_bugs(Ssh ssh, char *vstring)
+{
+ char *imp; /* pointer to implementation part */
+ imp = vstring;
+ imp += strcspn(imp, "-");
+ if (*imp) imp++;
+ imp += strcspn(imp, "-");
+ if (*imp) imp++;
+
+ ssh->remote_bugs = 0;
+
+ if (ssh->cfg.sshbug_ignore1 == FORCE_ON ||
+ (ssh->cfg.sshbug_ignore1 == AUTO &&
+ (!strcmp(imp, "1.2.18") || !strcmp(imp, "1.2.19") ||
+ !strcmp(imp, "1.2.20") || !strcmp(imp, "1.2.21") ||
+ !strcmp(imp, "1.2.22") || !strcmp(imp, "Cisco-1.25") ||
+ !strcmp(imp, "OSU_1.4alpha3") || !strcmp(imp, "OSU_1.5alpha4")))) {
+ /*
+ * These versions don't support SSH1_MSG_IGNORE, so we have
+ * to use a different defence against password length
+ * sniffing.
+ */
+ ssh->remote_bugs |= BUG_CHOKES_ON_SSH1_IGNORE;
+ logevent("We believe remote version has SSH1 ignore bug");
+ }
+
+ if (ssh->cfg.sshbug_plainpw1 == FORCE_ON ||
+ (ssh->cfg.sshbug_plainpw1 == AUTO &&
+ (!strcmp(imp, "Cisco-1.25") || !strcmp(imp, "OSU_1.4alpha3")))) {
+ /*
+ * These versions need a plain password sent; they can't
+ * handle having a null and a random length of data after
+ * the password.
+ */
+ ssh->remote_bugs |= BUG_NEEDS_SSH1_PLAIN_PASSWORD;
+ logevent("We believe remote version needs a plain SSH1 password");
+ }
+
+ if (ssh->cfg.sshbug_rsa1 == FORCE_ON ||
+ (ssh->cfg.sshbug_rsa1 == AUTO &&
+ (!strcmp(imp, "Cisco-1.25")))) {
+ /*
+ * These versions apparently have no clue whatever about
+ * RSA authentication and will panic and die if they see
+ * an AUTH_RSA message.
+ */
+ ssh->remote_bugs |= BUG_CHOKES_ON_RSA;
+ logevent("We believe remote version can't handle RSA authentication");
+ }
+
+ if (ssh->cfg.sshbug_hmac2 == FORCE_ON ||
+ (ssh->cfg.sshbug_hmac2 == AUTO &&
+ !wc_match("* VShell", imp) &&
+ (wc_match("2.1.0*", imp) || wc_match("2.0.*", imp) ||
+ wc_match("2.2.0*", imp) || wc_match("2.3.0*", imp) ||
+ wc_match("2.1 *", imp)))) {
+ /*
+ * These versions have the HMAC bug.
+ */
+ ssh->remote_bugs |= BUG_SSH2_HMAC;
+ logevent("We believe remote version has SSH2 HMAC bug");
+ }
+
+ if (ssh->cfg.sshbug_derivekey2 == FORCE_ON ||
+ (ssh->cfg.sshbug_derivekey2 == AUTO &&
+ !wc_match("* VShell", imp) &&
+ (wc_match("2.0.0*", imp) || wc_match("2.0.10*", imp) ))) {
+ /*
+ * These versions have the key-derivation bug (failing to
+ * include the literal shared secret in the hashes that
+ * generate the keys).
+ */
+ ssh->remote_bugs |= BUG_SSH2_DERIVEKEY;
+ logevent("We believe remote version has SSH2 key-derivation bug");
+ }
+
+ if (ssh->cfg.sshbug_rsapad2 == FORCE_ON ||
+ (ssh->cfg.sshbug_rsapad2 == AUTO &&
+ (wc_match("OpenSSH_2.[5-9]*", imp) ||
+ wc_match("OpenSSH_3.[0-2]*", imp)))) {
+ /*
+ * These versions have the SSH2 RSA padding bug.
+ */
+ ssh->remote_bugs |= BUG_SSH2_RSA_PADDING;
+ logevent("We believe remote version has SSH2 RSA padding bug");
+ }
+
+ if (ssh->cfg.sshbug_pksessid2 == FORCE_ON ||
+ (ssh->cfg.sshbug_pksessid2 == AUTO &&
+ wc_match("OpenSSH_2.[0-2]*", imp))) {
+ /*
+ * These versions have the SSH2 session-ID bug in
+ * public-key authentication.
+ */
+ ssh->remote_bugs |= BUG_SSH2_PK_SESSIONID;
+ logevent("We believe remote version has SSH2 public-key-session-ID bug");
+ }
+
+ if (ssh->cfg.sshbug_dhgex2 == FORCE_ON) {
+ /*
+ * User specified the SSH2 DH GEX bug.
+ */
+ ssh->remote_bugs |= BUG_SSH2_DH_GEX;
+ logevent("We believe remote version has SSH2 DH group exchange bug");
+ }
+}
+
+/*
+ * The `software version' part of an SSH version string is required
+ * to contain no spaces or minus signs.
+ */
+static void ssh_fix_verstring(char *str)
+{
+ /* Eat "SSH-<protoversion>-". */
+ assert(*str == 'S'); str++;
+ assert(*str == 'S'); str++;
+ assert(*str == 'H'); str++;
+ assert(*str == '-'); str++;
+ while (*str && *str != '-') str++;
+ assert(*str == '-'); str++;
+
+ /* Convert minus signs and spaces in the remaining string into
+ * underscores. */
+ while (*str) {
+ if (*str == '-' || *str == ' ')
+ *str = '_';
+ str++;
+ }
+}
+
+static int do_ssh_init(Ssh ssh, unsigned char c)
+{
+ struct do_ssh_init_state {
+ int vslen;
+ char version[10];
+ char *vstring;
+ int vstrsize;
+ int i;
+ int proto1, proto2;
+ };
+ crState(do_ssh_init_state);
+
+ crBegin(ssh->do_ssh_init_crstate);
+
+ /* Search for the string "SSH-" in the input. */
+ s->i = 0;
+ while (1) {
+ static const int transS[] = { 1, 2, 2, 1 };
+ static const int transH[] = { 0, 0, 3, 0 };
+ static const int transminus[] = { 0, 0, 0, -1 };
+ if (c == 'S')
+ s->i = transS[s->i];
+ else if (c == 'H')
+ s->i = transH[s->i];
+ else if (c == '-')
+ s->i = transminus[s->i];
+ else
+ s->i = 0;
+ if (s->i < 0)
+ break;
+ crReturn(1); /* get another character */
+ }
+
+ s->vstrsize = 16;
+ s->vstring = snewn(s->vstrsize, char);
+ strcpy(s->vstring, "SSH-");
+ s->vslen = 4;
+ s->i = 0;
+ while (1) {
+ crReturn(1); /* get another char */
+ if (s->vslen >= s->vstrsize - 1) {
+ s->vstrsize += 16;
+ s->vstring = sresize(s->vstring, s->vstrsize, char);
+ }
+ s->vstring[s->vslen++] = c;
+ if (s->i >= 0) {
+ if (c == '-') {
+ s->version[s->i] = '\0';
+ s->i = -1;
+ } else if (s->i < sizeof(s->version) - 1)
+ s->version[s->i++] = c;
+ } else if (c == '\012')
+ break;
+ }
+
+ ssh->agentfwd_enabled = FALSE;
+ ssh->rdpkt2_state.incoming_sequence = 0;
+
+ s->vstring[s->vslen] = 0;
+ s->vstring[strcspn(s->vstring, "\015\012")] = '\0';/* remove EOL chars */
+ {
+ char *vlog;
+ vlog = snewn(20 + s->vslen, char);
+ sprintf(vlog, "Server version: %s", s->vstring);
+ logevent(vlog);
+ sfree(vlog);
+ }
+ ssh_detect_bugs(ssh, s->vstring);
+
+ /*
+ * Decide which SSH protocol version to support.
+ */
+
+ /* Anything strictly below "2.0" means protocol 1 is supported. */
+ s->proto1 = ssh_versioncmp(s->version, "2.0") < 0;
+ /* Anything greater or equal to "1.99" means protocol 2 is supported. */
+ s->proto2 = ssh_versioncmp(s->version, "1.99") >= 0;
+
+ if (ssh->cfg.sshprot == 0 && !s->proto1) {
+ bombout(("SSH protocol version 1 required by user but not provided by server"));
+ crStop(0);
+ }
+ if (ssh->cfg.sshprot == 3 && !s->proto2) {
+ bombout(("SSH protocol version 2 required by user but not provided by server"));
+ crStop(0);
+ }
+
+ {
+ char *verstring;
+
+ if (s->proto2 && (ssh->cfg.sshprot >= 2 || !s->proto1)) {
+ /*
+ * Construct a v2 version string.
+ */
+ verstring = dupprintf("SSH-2.0-%s\015\012", sshver);
+ ssh->version = 2;
+ } else {
+ /*
+ * Construct a v1 version string.
+ */
+ verstring = dupprintf("SSH-%s-%s\012",
+ (ssh_versioncmp(s->version, "1.5") <= 0 ?
+ s->version : "1.5"),
+ sshver);
+ ssh->version = 1;
+ }
+
+ ssh_fix_verstring(verstring);
+
+ if (ssh->version == 2) {
+ /*
+ * Hash our version string and their version string.
+ */
+ SHA_Init(&ssh->exhashbase);
+ sha_string(&ssh->exhashbase, verstring,
+ strcspn(verstring, "\015\012"));
+ sha_string(&ssh->exhashbase, s->vstring,
+ strcspn(s->vstring, "\015\012"));
+
+ /*
+ * Initialise SSHv2 protocol.
+ */
+ ssh->protocol = ssh2_protocol;
+ ssh2_protocol_setup(ssh);
+ ssh->s_rdpkt = ssh2_rdpkt;
+ } else {
+ /*
+ * Initialise SSHv1 protocol.
+ */
+ ssh->protocol = ssh1_protocol;
+ ssh1_protocol_setup(ssh);
+ ssh->s_rdpkt = ssh1_rdpkt;
+ }
+ logeventf(ssh, "We claim version: %.*s",
+ strcspn(verstring, "\015\012"), verstring);
+ sk_write(ssh->s, verstring, strlen(verstring));
+ sfree(verstring);
+ }
+
+ logeventf(ssh, "Using SSH protocol version %d", ssh->version);
+
+ update_specials_menu(ssh->frontend);
+ ssh->state = SSH_STATE_BEFORE_SIZE;
+ ssh->pinger = pinger_new(&ssh->cfg, &ssh_backend, ssh);
+
+ sfree(s->vstring);
+
+ crFinish(0);
+}
+
+static void ssh_gotdata(Ssh ssh, unsigned char *data, int datalen)
+{
+ crBegin(ssh->ssh_gotdata_crstate);
+
+ /*
+ * To begin with, feed the characters one by one to the
+ * protocol initialisation / selection function do_ssh_init().
+ * When that returns 0, we're done with the initial greeting
+ * exchange and can move on to packet discipline.
+ */
+ while (1) {
+ int ret; /* need not be kept across crReturn */
+ if (datalen == 0)
+ crReturnV; /* more data please */
+ ret = do_ssh_init(ssh, *data);
+ data++;
+ datalen--;
+ if (ret == 0)
+ break;
+ }
+
+ /*
+ * We emerge from that loop when the initial negotiation is
+ * over and we have selected an s_rdpkt function. Now pass
+ * everything to s_rdpkt, and then pass the resulting packets
+ * to the proper protocol handler.
+ */
+ if (datalen == 0)
+ crReturnV;
+ while (1) {
+ while (datalen > 0) {
+ struct Packet *pktin = ssh->s_rdpkt(ssh, &data, &datalen);
+ if (pktin) {
+ ssh->protocol(ssh, NULL, 0, pktin);
+ ssh_free_packet(pktin);
+ }
+ if (ssh->state == SSH_STATE_CLOSED)
+ return;
+ }
+ crReturnV;
+ }
+ crFinishV;
+}
+
+static void ssh_do_close(Ssh ssh)
+{
+ int i;
+ struct ssh_channel *c;
+
+ ssh->state = SSH_STATE_CLOSED;
+ if (ssh->s) {
+ sk_close(ssh->s);
+ ssh->s = NULL;
+ notify_remote_exit(ssh->frontend);
+ }
+ /*
+ * Now we must shut down any port and X forwardings going
+ * through this connection.
+ */
+ if (ssh->channels) {
+ for (i = 0; NULL != (c = index234(ssh->channels, i)); i++) {
+ switch (c->type) {
+ case CHAN_X11:
+ x11_close(c->u.x11.s);
+ break;
+ case CHAN_SOCKDATA:
+ pfd_close(c->u.pfd.s);
+ break;
+ }
+ del234(ssh->channels, c);
+ if (ssh->version == 2)
+ bufchain_clear(&c->v.v2.outbuffer);
+ sfree(c);
+ }
+ }
+}
+
+static int ssh_closing(Plug plug, const char *error_msg, int error_code,
+ int calling_back)
+{
+ Ssh ssh = (Ssh) plug;
+ ssh_do_close(ssh);
+ if (error_msg) {
+ /* A socket error has occurred. */
+ logevent(error_msg);
+ connection_fatal(ssh->frontend, "%s", error_msg);
+ } else {
+ /* Otherwise, the remote side closed the connection normally. */
+ }
+ return 0;
+}
+
+static int ssh_receive(Plug plug, int urgent, char *data, int len)
+{
+ Ssh ssh = (Ssh) plug;
+ ssh_gotdata(ssh, (unsigned char *)data, len);
+ if (ssh->state == SSH_STATE_CLOSED) {
+ ssh_do_close(ssh);
+ return 0;
+ }
+ return 1;
+}
+
+static void ssh_sent(Plug plug, int bufsize)
+{
+ Ssh ssh = (Ssh) plug;
+ /*
+ * If the send backlog on the SSH socket itself clears, we
+ * should unthrottle the whole world if it was throttled.
+ */
+ if (bufsize < SSH_MAX_BACKLOG)
+ ssh_throttle_all(ssh, 0, bufsize);
+}
+
+/*
+ * Connect to specified host and port.
+ * Returns an error message, or NULL on success.
+ * Also places the canonical host name into `realhost'. It must be
+ * freed by the caller.
+ */
+static const char *connect_to_host(Ssh ssh, char *host, int port,
+ char **realhost, int nodelay, int keepalive)
+{
+ static const struct plug_function_table fn_table = {
+ ssh_closing,
+ ssh_receive,
+ ssh_sent,
+ NULL
+ };
+
+ SockAddr addr;
+ const char *err;
+
+ ssh->savedhost = snewn(1 + strlen(host), char);
+ if (!ssh->savedhost)
+ fatalbox("Out of memory");
+ strcpy(ssh->savedhost, host);
+
+ if (port < 0)
+ port = 22; /* default ssh port */
+ ssh->savedport = port;
+
+ /*
+ * Try to find host.
+ */
+ logeventf(ssh, "Looking up host \"%s\"", host);
+ addr = name_lookup(host, port, realhost, &ssh->cfg);
+ if ((err = sk_addr_error(addr)) != NULL) {
+ sk_addr_free(addr);
+ return err;
+ }
+
+ /*
+ * Open socket.
+ */
+ {
+ char addrbuf[100];
+ sk_getaddr(addr, addrbuf, 100);
+ logeventf(ssh, "Connecting to %s port %d", addrbuf, port);
+ }
+ ssh->fn = &fn_table;
+ ssh->s = new_connection(addr, *realhost, port,
+ 0, 1, nodelay, keepalive, (Plug) ssh, &ssh->cfg);
+ if ((err = sk_socket_error(ssh->s)) != NULL) {
+ ssh->s = NULL;
+ notify_remote_exit(ssh->frontend);
+ return err;
+ }
+
+ return NULL;
+}
+
+/*
+ * Throttle or unthrottle the SSH connection.
+ */
+static void ssh1_throttle(Ssh ssh, int adjust)
+{
+ int old_count = ssh->v1_throttle_count;
+ ssh->v1_throttle_count += adjust;
+ assert(ssh->v1_throttle_count >= 0);
+ if (ssh->v1_throttle_count && !old_count) {
+ sk_set_frozen(ssh->s, 1);
+ } else if (!ssh->v1_throttle_count && old_count) {
+ sk_set_frozen(ssh->s, 0);
+ }
+}
+
+/*
+ * Throttle or unthrottle _all_ local data streams (for when sends
+ * on the SSH connection itself back up).
+ */
+static void ssh_throttle_all(Ssh ssh, int enable, int bufsize)
+{
+ int i;
+ struct ssh_channel *c;
+
+ if (enable == ssh->throttled_all)
+ return;
+ ssh->throttled_all = enable;
+ ssh->overall_bufsize = bufsize;
+ if (!ssh->channels)
+ return;
+ for (i = 0; NULL != (c = index234(ssh->channels, i)); i++) {
+ switch (c->type) {
+ case CHAN_MAINSESSION:
+ /*
+ * This is treated separately, outside the switch.
+ */
+ break;
+ case CHAN_X11:
+ x11_override_throttle(c->u.x11.s, enable);
+ break;
+ case CHAN_AGENT:
+ /* Agent channels require no buffer management. */
+ break;
+ case CHAN_SOCKDATA:
+ pfd_override_throttle(c->u.pfd.s, enable);
+ break;
+ }
+ }
+}
+
+/*
+ * Username and password input, abstracted off into routines
+ * reusable in several places - even between SSH1 and SSH2.
+ */
+
+/* Set up a username or password input loop on a given buffer. */
+static void setup_userpass_input(Ssh ssh, char *buffer, int buflen, int echo)
+{
+ ssh->userpass_input_buffer = buffer;
+ ssh->userpass_input_buflen = buflen;
+ ssh->userpass_input_bufpos = 0;
+ ssh->userpass_input_echo = echo;
+}
+
+/*
+ * Process some terminal data in the course of username/password
+ * input. Returns >0 for success (line of input returned in
+ * buffer), <0 for failure (user hit ^C/^D, bomb out and exit), 0
+ * for inconclusive (keep waiting for more input please).
+ */
+static int process_userpass_input(Ssh ssh, unsigned char *in, int inlen)
+{
+ char c;
+
+ while (inlen--) {
+ switch (c = *in++) {
+ case 10:
+ case 13:
+ ssh->userpass_input_buffer[ssh->userpass_input_bufpos] = 0;
+ ssh->userpass_input_buffer[ssh->userpass_input_buflen-1] = 0;
+ return +1;
+ break;
+ case 8:
+ case 127:
+ if (ssh->userpass_input_bufpos > 0) {
+ if (ssh->userpass_input_echo)
+ c_write_str(ssh, "\b \b");
+ ssh->userpass_input_bufpos--;
+ }
+ break;
+ case 21:
+ case 27:
+ while (ssh->userpass_input_bufpos > 0) {
+ if (ssh->userpass_input_echo)
+ c_write_str(ssh, "\b \b");
+ ssh->userpass_input_bufpos--;
+ }
+ break;
+ case 3:
+ case 4:
+ return -1;
+ break;
+ default:
+ /*
+ * This simplistic check for printability is disabled
+ * when we're doing password input, because some people
+ * have control characters in their passwords.o
+ */
+ if ((!ssh->userpass_input_echo ||
+ (c >= ' ' && c <= '~') ||
+ ((unsigned char) c >= 160))
+ && ssh->userpass_input_bufpos < ssh->userpass_input_buflen-1) {
+ ssh->userpass_input_buffer[ssh->userpass_input_bufpos++] = c;
+ if (ssh->userpass_input_echo)
+ c_write(ssh, &c, 1);
+ }
+ break;
+ }
+ }
+ return 0;
+}
+
+static void ssh_agent_callback(void *sshv, void *reply, int replylen)
+{
+ Ssh ssh = (Ssh) sshv;
+
+ ssh->agent_response = reply;
+ ssh->agent_response_len = replylen;
+
+ if (ssh->version == 1)
+ do_ssh1_login(ssh, NULL, -1, NULL);
+ else
+ do_ssh2_authconn(ssh, NULL, -1, NULL);
+}
+
+static void ssh_agentf_callback(void *cv, void *reply, int replylen)
+{
+ struct ssh_channel *c = (struct ssh_channel *)cv;
+ Ssh ssh = c->ssh;
+ void *sentreply = reply;
+
+ if (!sentreply) {
+ /* Fake SSH_AGENT_FAILURE. */
+ sentreply = "\0\0\0\1\5";
+ replylen = 5;
+ }
+ if (ssh->version == 2) {
+ ssh2_add_channel_data(c, sentreply, replylen);
+ ssh2_try_send(c);
+ } else {
+ send_packet(ssh, SSH1_MSG_CHANNEL_DATA,
+ PKT_INT, c->remoteid,
+ PKTT_DATA,
+ PKT_INT, replylen,
+ PKT_DATA, sentreply, replylen,
+ PKTT_OTHER,
+ PKT_END);
+ }
+ if (reply)
+ sfree(reply);
+}
+
+/*
+ * Handle the key exchange and user authentication phases.
+ */
+static int do_ssh1_login(Ssh ssh, unsigned char *in, int inlen,
+ struct Packet *pktin)
+{
+ int i, j, ret;
+ unsigned char cookie[8], *ptr;
+ struct RSAKey servkey, hostkey;
+ struct MD5Context md5c;
+ struct do_ssh1_login_state {
+ int len;
+ unsigned char *rsabuf, *keystr1, *keystr2;
+ unsigned long supported_ciphers_mask, supported_auths_mask;
+ int tried_publickey, tried_agent;
+ int tis_auth_refused, ccard_auth_refused;
+ unsigned char session_id[16];
+ int cipher_type;
+ char username[100];
+ void *publickey_blob;
+ int publickey_bloblen;
+ char password[100];
+ char prompt[200];
+ int pos;
+ char c;
+ int pwpkt_type;
+ unsigned char request[5], *response, *p;
+ int responselen;
+ int keyi, nkeys;
+ int authed;
+ struct RSAKey key;
+ Bignum challenge;
+ char *commentp;
+ int commentlen;
+ };
+ crState(do_ssh1_login_state);
+
+ crBegin(ssh->do_ssh1_login_crstate);
+
+ if (!pktin)
+ crWaitUntil(pktin);
+
+ if (pktin->type != SSH1_SMSG_PUBLIC_KEY) {
+ bombout(("Public key packet not received"));
+ crStop(0);
+ }
+
+ logevent("Received public keys");
+
+ ptr = ssh_pkt_getdata(pktin, 8);
+ if (!ptr) {
+ bombout(("SSH1 public key packet stopped before random cookie"));
+ crStop(0);
+ }
+ memcpy(cookie, ptr, 8);
+
+ if (!ssh1_pkt_getrsakey(pktin, &servkey, &s->keystr1) ||
+ !ssh1_pkt_getrsakey(pktin, &hostkey, &s->keystr2)) {
+ bombout(("Failed to read SSH1 public keys from public key packet"));
+ crStop(0);
+ }
+
+ /*
+ * Log the host key fingerprint.
+ */
+ {
+ char logmsg[80];
+ logevent("Host key fingerprint is:");
+ strcpy(logmsg, " ");
+ hostkey.comment = NULL;
+ rsa_fingerprint(logmsg + strlen(logmsg),
+ sizeof(logmsg) - strlen(logmsg), &hostkey);
+ logevent(logmsg);
+ }
+
+ ssh->v1_remote_protoflags = ssh_pkt_getuint32(pktin);
+ s->supported_ciphers_mask = ssh_pkt_getuint32(pktin);
+ s->supported_auths_mask = ssh_pkt_getuint32(pktin);
+
+ ssh->v1_local_protoflags =
+ ssh->v1_remote_protoflags & SSH1_PROTOFLAGS_SUPPORTED;
+ ssh->v1_local_protoflags |= SSH1_PROTOFLAG_SCREEN_NUMBER;
+
+ MD5Init(&md5c);
+ MD5Update(&md5c, s->keystr2, hostkey.bytes);
+ MD5Update(&md5c, s->keystr1, servkey.bytes);
+ MD5Update(&md5c, cookie, 8);
+ MD5Final(s->session_id, &md5c);
+
+ for (i = 0; i < 32; i++)
+ ssh->session_key[i] = random_byte();
+
+ /*
+ * Verify that the `bits' and `bytes' parameters match.
+ */
+ if (hostkey.bits > hostkey.bytes * 8 ||
+ servkey.bits > servkey.bytes * 8) {
+ bombout(("SSH1 public keys were badly formatted"));
+ crStop(0);
+ }
+
+ s->len = (hostkey.bytes > servkey.bytes ? hostkey.bytes : servkey.bytes);
+
+ s->rsabuf = snewn(s->len, unsigned char);
+ if (!s->rsabuf)
+ fatalbox("Out of memory");
+
+ /*
+ * Verify the host key.
+ */
+ {
+ /*
+ * First format the key into a string.
+ */
+ int len = rsastr_len(&hostkey);
+ char fingerprint[100];
+ char *keystr = snewn(len, char);
+ if (!keystr)
+ fatalbox("Out of memory");
+ rsastr_fmt(keystr, &hostkey);
+ rsa_fingerprint(fingerprint, sizeof(fingerprint), &hostkey);
+ verify_ssh_host_key(ssh->frontend,
+ ssh->savedhost, ssh->savedport, "rsa", keystr,
+ fingerprint);
+ sfree(keystr);
+ }
+
+ for (i = 0; i < 32; i++) {
+ s->rsabuf[i] = ssh->session_key[i];
+ if (i < 16)
+ s->rsabuf[i] ^= s->session_id[i];
+ }
+
+ if (hostkey.bytes > servkey.bytes) {
+ ret = rsaencrypt(s->rsabuf, 32, &servkey);
+ if (ret)
+ ret = rsaencrypt(s->rsabuf, servkey.bytes, &hostkey);
+ } else {
+ ret = rsaencrypt(s->rsabuf, 32, &hostkey);
+ if (ret)
+ ret = rsaencrypt(s->rsabuf, hostkey.bytes, &servkey);
+ }
+ if (!ret) {
+ bombout(("SSH1 public key encryptions failed due to bad formatting"));
+ crStop(0);
+ }
+
+ logevent("Encrypted session key");
+
+ {
+ int cipher_chosen = 0, warn = 0;
+ char *cipher_string = NULL;
+ int i;
+ for (i = 0; !cipher_chosen && i < CIPHER_MAX; i++) {
+ int next_cipher = ssh->cfg.ssh_cipherlist[i];
+ if (next_cipher == CIPHER_WARN) {
+ /* If/when we choose a cipher, warn about it */
+ warn = 1;
+ } else if (next_cipher == CIPHER_AES) {
+ /* XXX Probably don't need to mention this. */
+ logevent("AES not supported in SSH1, skipping");
+ } else {
+ switch (next_cipher) {
+ case CIPHER_3DES: s->cipher_type = SSH_CIPHER_3DES;
+ cipher_string = "3DES"; break;
+ case CIPHER_BLOWFISH: s->cipher_type = SSH_CIPHER_BLOWFISH;
+ cipher_string = "Blowfish"; break;
+ case CIPHER_DES: s->cipher_type = SSH_CIPHER_DES;
+ cipher_string = "single-DES"; break;
+ }
+ if (s->supported_ciphers_mask & (1 << s->cipher_type))
+ cipher_chosen = 1;
+ }
+ }
+ if (!cipher_chosen) {
+ if ((s->supported_ciphers_mask & (1 << SSH_CIPHER_3DES)) == 0)
+ bombout(("Server violates SSH 1 protocol by not "
+ "supporting 3DES encryption"));
+ else
+ /* shouldn't happen */
+ bombout(("No supported ciphers found"));
+ crStop(0);
+ }
+
+ /* Warn about chosen cipher if necessary. */
+ if (warn)
+ askcipher(ssh->frontend, cipher_string, 0);
+ }
+
+ switch (s->cipher_type) {
+ case SSH_CIPHER_3DES:
+ logevent("Using 3DES encryption");
+ break;
+ case SSH_CIPHER_DES:
+ logevent("Using single-DES encryption");
+ break;
+ case SSH_CIPHER_BLOWFISH:
+ logevent("Using Blowfish encryption");
+ break;
+ }
+
+ send_packet(ssh, SSH1_CMSG_SESSION_KEY,
+ PKT_CHAR, s->cipher_type,
+ PKT_DATA, cookie, 8,
+ PKT_CHAR, (s->len * 8) >> 8, PKT_CHAR, (s->len * 8) & 0xFF,
+ PKT_DATA, s->rsabuf, s->len,
+ PKT_INT, ssh->v1_local_protoflags, PKT_END);
+
+ logevent("Trying to enable encryption...");
+
+ sfree(s->rsabuf);
+
+ ssh->cipher = (s->cipher_type == SSH_CIPHER_BLOWFISH ? &ssh_blowfish_ssh1 :
+ s->cipher_type == SSH_CIPHER_DES ? &ssh_des :
+ &ssh_3des);
+ ssh->v1_cipher_ctx = ssh->cipher->make_context();
+ ssh->cipher->sesskey(ssh->v1_cipher_ctx, ssh->session_key);
+ logeventf(ssh, "Initialised %s encryption", ssh->cipher->text_name);
+
+ ssh->crcda_ctx = crcda_make_context();
+ logevent("Installing CRC compensation attack detector");
+
+ if (servkey.modulus) {
+ sfree(servkey.modulus);
+ servkey.modulus = NULL;
+ }
+ if (servkey.exponent) {
+ sfree(servkey.exponent);
+ servkey.exponent = NULL;
+ }
+ if (hostkey.modulus) {
+ sfree(hostkey.modulus);
+ hostkey.modulus = NULL;
+ }
+ if (hostkey.exponent) {
+ sfree(hostkey.exponent);
+ hostkey.exponent = NULL;
+ }
+ crWaitUntil(pktin);
+
+ if (pktin->type != SSH1_SMSG_SUCCESS) {
+ bombout(("Encryption not successfully enabled"));
+ crStop(0);
+ }
+
+ logevent("Successfully started encryption");
+
+ fflush(stdout);
+ {
+ if (!*ssh->cfg.username) {
+ if (ssh_get_line && !ssh_getline_pw_only) {
+ if (!ssh_get_line("login as: ",
+ s->username, sizeof(s->username), FALSE)) {
+ /*
+ * get_line failed to get a username.
+ * Terminate.
+ */
+ logevent("No username provided. Abandoning session.");
+ ssh_closing((Plug)ssh, NULL, 0, 0);
+ crStop(1);
+ }
+ } else {
+ int ret; /* need not be kept over crReturn */
+ c_write_str(ssh, "login as: ");
+ ssh->send_ok = 1;
+
+ setup_userpass_input(ssh, s->username, sizeof(s->username), 1);
+ do {
+ crWaitUntil(!pktin);
+ ret = process_userpass_input(ssh, in, inlen);
+ } while (ret == 0);
+ if (ret < 0)
+ cleanup_exit(0);
+ c_write_str(ssh, "\r\n");
+ }
+ } else {
+ strncpy(s->username, ssh->cfg.username, sizeof(s->username));
+ s->username[sizeof(s->username)-1] = '\0';
+ }
+
+ send_packet(ssh, SSH1_CMSG_USER, PKT_STR, s->username, PKT_END);
+ {
+ char userlog[22 + sizeof(s->username)];
+ sprintf(userlog, "Sent username \"%s\"", s->username);
+ logevent(userlog);
+ if (flags & FLAG_INTERACTIVE &&
+ (!((flags & FLAG_STDERR) && (flags & FLAG_VERBOSE)))) {
+ strcat(userlog, "\r\n");
+ c_write_str(ssh, userlog);
+ }
+ }
+ }
+
+ crWaitUntil(pktin);
+
+ if ((ssh->remote_bugs & BUG_CHOKES_ON_RSA)) {
+ /* We must not attempt PK auth. Pretend we've already tried it. */
+ s->tried_publickey = s->tried_agent = 1;
+ } else {
+ s->tried_publickey = s->tried_agent = 0;
+ }
+ s->tis_auth_refused = s->ccard_auth_refused = 0;
+ /* Load the public half of ssh->cfg.keyfile so we notice if it's in Pageant */
+ if (!filename_is_null(ssh->cfg.keyfile)) {
+ if (!rsakey_pubblob(&ssh->cfg.keyfile,
+ &s->publickey_blob, &s->publickey_bloblen, NULL))
+ s->publickey_blob = NULL;
+ } else
+ s->publickey_blob = NULL;
+
+ while (pktin->type == SSH1_SMSG_FAILURE) {
+ s->pwpkt_type = SSH1_CMSG_AUTH_PASSWORD;
+
+ if (agent_exists() && !s->tried_agent) {
+ /*
+ * Attempt RSA authentication using Pageant.
+ */
+ void *r;
+
+ s->authed = FALSE;
+ s->tried_agent = 1;
+ logevent("Pageant is running. Requesting keys.");
+
+ /* Request the keys held by the agent. */
+ PUT_32BIT(s->request, 1);
+ s->request[4] = SSH1_AGENTC_REQUEST_RSA_IDENTITIES;
+ if (!agent_query(s->request, 5, &r, &s->responselen,
+ ssh_agent_callback, ssh)) {
+ do {
+ crReturn(0);
+ if (pktin) {
+ bombout(("Unexpected data from server while waiting"
+ " for agent response"));
+ crStop(0);
+ }
+ } while (pktin || inlen > 0);
+ r = ssh->agent_response;
+ s->responselen = ssh->agent_response_len;
+ }
+ s->response = (unsigned char *) r;
+ if (s->response && s->responselen >= 5 &&
+ s->response[4] == SSH1_AGENT_RSA_IDENTITIES_ANSWER) {
+ s->p = s->response + 5;
+ s->nkeys = GET_32BIT(s->p);
+ s->p += 4;
+ {
+ char buf[64];
+ sprintf(buf, "Pageant has %d SSH1 keys", s->nkeys);
+ logevent(buf);
+ }
+ for (s->keyi = 0; s->keyi < s->nkeys; s->keyi++) {
+ {
+ char buf[64];
+ sprintf(buf, "Trying Pageant key #%d", s->keyi);
+ logevent(buf);
+ }
+ if (s->publickey_blob &&
+ !memcmp(s->p, s->publickey_blob,
+ s->publickey_bloblen)) {
+ logevent("This key matches configured key file");
+ s->tried_publickey = 1;
+ }
+ s->p += 4;
+ {
+ int n, ok = FALSE;
+ do { /* do while (0) to make breaking easy */
+ n = ssh1_read_bignum
+ (s->p, s->responselen-(s->p-s->response),
+ &s->key.exponent);
+ if (n < 0)
+ break;
+ s->p += n;
+ n = ssh1_read_bignum
+ (s->p, s->responselen-(s->p-s->response),
+ &s->key.modulus);
+ if (n < 0)
+ break;
+ s->p += n;
+ if (s->responselen - (s->p-s->response) < 4)
+ break;
+ s->commentlen = GET_32BIT(s->p);
+ s->p += 4;
+ if (s->responselen - (s->p-s->response) <
+ s->commentlen)
+ break;
+ s->commentp = (char *)s->p;
+ s->p += s->commentlen;
+ ok = TRUE;
+ } while (0);
+ if (!ok) {
+ logevent("Pageant key list packet was truncated");
+ break;
+ }
+ }
+ send_packet(ssh, SSH1_CMSG_AUTH_RSA,
+ PKT_BIGNUM, s->key.modulus, PKT_END);
+ crWaitUntil(pktin);
+ if (pktin->type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
+ logevent("Key refused");
+ continue;
+ }
+ logevent("Received RSA challenge");
+ if ((s->challenge = ssh1_pkt_getmp(pktin)) == NULL) {
+ bombout(("Server's RSA challenge was badly formatted"));
+ crStop(0);
+ }
+
+ {
+ char *agentreq, *q, *ret;
+ void *vret;
+ int len, retlen;
+ len = 1 + 4; /* message type, bit count */
+ len += ssh1_bignum_length(s->key.exponent);
+ len += ssh1_bignum_length(s->key.modulus);
+ len += ssh1_bignum_length(s->challenge);
+ len += 16; /* session id */
+ len += 4; /* response format */
+ agentreq = snewn(4 + len, char);
+ PUT_32BIT(agentreq, len);
+ q = agentreq + 4;
+ *q++ = SSH1_AGENTC_RSA_CHALLENGE;
+ PUT_32BIT(q, bignum_bitcount(s->key.modulus));
+ q += 4;
+ q += ssh1_write_bignum(q, s->key.exponent);
+ q += ssh1_write_bignum(q, s->key.modulus);
+ q += ssh1_write_bignum(q, s->challenge);
+ memcpy(q, s->session_id, 16);
+ q += 16;
+ PUT_32BIT(q, 1); /* response format */
+ if (!agent_query(agentreq, len + 4, &vret, &retlen,
+ ssh_agent_callback, ssh)) {
+ sfree(agentreq);
+ do {
+ crReturn(0);
+ if (pktin) {
+ bombout(("Unexpected data from server"
+ " while waiting for agent"
+ " response"));
+ crStop(0);
+ }
+ } while (pktin || inlen > 0);
+ vret = ssh->agent_response;
+ retlen = ssh->agent_response_len;
+ } else
+ sfree(agentreq);
+ ret = vret;
+ if (ret) {
+ if (ret[4] == SSH1_AGENT_RSA_RESPONSE) {
+ logevent("Sending Pageant's response");
+ send_packet(ssh, SSH1_CMSG_AUTH_RSA_RESPONSE,
+ PKT_DATA, ret + 5, 16,
+ PKT_END);
+ sfree(ret);
+ crWaitUntil(pktin);
+ if (pktin->type == SSH1_SMSG_SUCCESS) {
+ logevent
+ ("Pageant's response accepted");
+ if (flags & FLAG_VERBOSE) {
+ c_write_str(ssh, "Authenticated using"
+ " RSA key \"");
+ c_write(ssh, s->commentp,
+ s->commentlen);
+ c_write_str(ssh, "\" from agent\r\n");
+ }
+ s->authed = TRUE;
+ } else
+ logevent
+ ("Pageant's response not accepted");
+ } else {
+ logevent
+ ("Pageant failed to answer challenge");
+ sfree(ret);
+ }
+ } else {
+ logevent("No reply received from Pageant");
+ }
+ }
+ freebn(s->key.exponent);
+ freebn(s->key.modulus);
+ freebn(s->challenge);
+ if (s->authed)
+ break;
+ }
+ sfree(s->response);
+ }
+ if (s->authed)
+ break;
+ }
+ if (!filename_is_null(ssh->cfg.keyfile) && !s->tried_publickey)
+ s->pwpkt_type = SSH1_CMSG_AUTH_RSA;
+
+ if (ssh->cfg.try_tis_auth &&
+ (s->supported_auths_mask & (1 << SSH1_AUTH_TIS)) &&
+ !s->tis_auth_refused) {
+ s->pwpkt_type = SSH1_CMSG_AUTH_TIS_RESPONSE;
+ logevent("Requested TIS authentication");
+ send_packet(ssh, SSH1_CMSG_AUTH_TIS, PKT_END);
+ crWaitUntil(pktin);
+ if (pktin->type != SSH1_SMSG_AUTH_TIS_CHALLENGE) {
+ logevent("TIS authentication declined");
+ if (flags & FLAG_INTERACTIVE)
+ c_write_str(ssh, "TIS authentication refused.\r\n");
+ s->tis_auth_refused = 1;
+ continue;
+ } else {
+ char *challenge;
+ int challengelen;
+
+ ssh_pkt_getstring(pktin, &challenge, &challengelen);
+ if (!challenge) {
+ bombout(("TIS challenge packet was badly formed"));
+ crStop(0);
+ }
+ logevent("Received TIS challenge");
+ if (challengelen > sizeof(s->prompt) - 1)
+ challengelen = sizeof(s->prompt) - 1;/* prevent overrun */
+ memcpy(s->prompt, challenge, challengelen);
+ /* Prompt heuristic comes from OpenSSH */
+ strncpy(s->prompt + challengelen,
+ memchr(s->prompt, '\n', challengelen) ?
+ "": "\r\nResponse: ",
+ (sizeof s->prompt) - challengelen);
+ s->prompt[(sizeof s->prompt) - 1] = '\0';
+ }
+ }
+ if (ssh->cfg.try_tis_auth &&
+ (s->supported_auths_mask & (1 << SSH1_AUTH_CCARD)) &&
+ !s->ccard_auth_refused) {
+ s->pwpkt_type = SSH1_CMSG_AUTH_CCARD_RESPONSE;
+ logevent("Requested CryptoCard authentication");
+ send_packet(ssh, SSH1_CMSG_AUTH_CCARD, PKT_END);
+ crWaitUntil(pktin);
+ if (pktin->type != SSH1_SMSG_AUTH_CCARD_CHALLENGE) {
+ logevent("CryptoCard authentication declined");
+ c_write_str(ssh, "CryptoCard authentication refused.\r\n");
+ s->ccard_auth_refused = 1;
+ continue;
+ } else {
+ char *challenge;
+ int challengelen;
+
+ ssh_pkt_getstring(pktin, &challenge, &challengelen);
+ if (!challenge) {
+ bombout(("CryptoCard challenge packet was badly formed"));
+ crStop(0);
+ }
+ logevent("Received CryptoCard challenge");
+ if (challengelen > sizeof(s->prompt) - 1)
+ challengelen = sizeof(s->prompt) - 1;/* prevent overrun */
+ memcpy(s->prompt, challenge, challengelen);
+ strncpy(s->prompt + challengelen,
+ memchr(s->prompt, '\n', challengelen) ?
+ "" : "\r\nResponse: ",
+ sizeof(s->prompt) - challengelen);
+ s->prompt[sizeof(s->prompt) - 1] = '\0';
+ }
+ }
+ if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
+ sprintf(s->prompt, "%.90s@%.90s's password: ",
+ s->username, ssh->savedhost);
+ }
+ if (s->pwpkt_type == SSH1_CMSG_AUTH_RSA) {
+ char *comment = NULL;
+ int type;
+ char msgbuf[256];
+ if (flags & FLAG_VERBOSE)
+ c_write_str(ssh, "Trying public key authentication.\r\n");
+ logeventf(ssh, "Trying public key \"%s\"",
+ filename_to_str(&ssh->cfg.keyfile));
+ type = key_type(&ssh->cfg.keyfile);
+ if (type != SSH_KEYTYPE_SSH1) {
+ sprintf(msgbuf, "Key is of wrong type (%s)",
+ key_type_to_str(type));
+ logevent(msgbuf);
+ c_write_str(ssh, msgbuf);
+ c_write_str(ssh, "\r\n");
+ s->tried_publickey = 1;
+ continue;
+ }
+ if (!rsakey_encrypted(&ssh->cfg.keyfile, &comment)) {
+ if (flags & FLAG_VERBOSE)
+ c_write_str(ssh, "No passphrase required.\r\n");
+ goto tryauth;
+ }
+ sprintf(s->prompt, "Passphrase for key \"%.100s\": ", comment);
+ sfree(comment);
+ }
+
+ /*
+ * Show password prompt, having first obtained it via a TIS
+ * or CryptoCard exchange if we're doing TIS or CryptoCard
+ * authentication.
+ */
+ if (ssh_get_line) {
+ if (!ssh_get_line(s->prompt, s->password,
+ sizeof(s->password), TRUE)) {
+ /*
+ * get_line failed to get a password (for example
+ * because one was supplied on the command line
+ * which has already failed to work). Terminate.
+ */
+ send_packet(ssh, SSH1_MSG_DISCONNECT,
+ PKT_STR, "No more passwords available to try",
+ PKT_END);
+ logevent("Unable to authenticate");
+ connection_fatal(ssh->frontend, "Unable to authenticate");
+ ssh_closing((Plug)ssh, NULL, 0, 0);
+ crStop(1);
+ }
+ } else {
+ /* Prompt may have come from server. We've munged it a bit, so
+ * we know it to be zero-terminated at least once. */
+ int ret; /* need not be saved over crReturn */
+ c_write_untrusted(ssh, s->prompt, strlen(s->prompt));
+ s->pos = 0;
+
+ setup_userpass_input(ssh, s->password, sizeof(s->password), 0);
+ do {
+ crWaitUntil(!pktin);
+ ret = process_userpass_input(ssh, in, inlen);
+ } while (ret == 0);
+ if (ret < 0)
+ cleanup_exit(0);
+ c_write_str(ssh, "\r\n");
+ }
+
+ tryauth:
+ if (s->pwpkt_type == SSH1_CMSG_AUTH_RSA) {
+ /*
+ * Try public key authentication with the specified
+ * key file.
+ */
+ s->tried_publickey = 1;
+
+ {
+ const char *error = NULL;
+ int ret = loadrsakey(&ssh->cfg.keyfile, &s->key, s->password,
+ &error);
+ if (ret == 0) {
+ c_write_str(ssh, "Couldn't load private key from ");
+ c_write_str(ssh, filename_to_str(&ssh->cfg.keyfile));
+ c_write_str(ssh, " (");
+ c_write_str(ssh, error);
+ c_write_str(ssh, ").\r\n");
+ continue; /* go and try password */
+ }
+ if (ret == -1) {
+ c_write_str(ssh, "Wrong passphrase.\r\n");
+ s->tried_publickey = 0;
+ continue; /* try again */
+ }
+ }
+
+ /*
+ * Send a public key attempt.
+ */
+ send_packet(ssh, SSH1_CMSG_AUTH_RSA,
+ PKT_BIGNUM, s->key.modulus, PKT_END);
+
+ crWaitUntil(pktin);
+ if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused our public key.\r\n");
+ continue; /* go and try password */
+ }
+ if (pktin->type != SSH1_SMSG_AUTH_RSA_CHALLENGE) {
+ bombout(("Bizarre response to offer of public key"));
+ crStop(0);
+ }
+
+ {
+ int i;
+ unsigned char buffer[32];
+ Bignum challenge, response;
+
+ if ((challenge = ssh1_pkt_getmp(pktin)) == NULL) {
+ bombout(("Server's RSA challenge was badly formatted"));
+ crStop(0);
+ }
+ response = rsadecrypt(challenge, &s->key);
+ freebn(s->key.private_exponent);/* burn the evidence */
+
+ for (i = 0; i < 32; i++) {
+ buffer[i] = bignum_byte(response, 31 - i);
+ }
+
+ MD5Init(&md5c);
+ MD5Update(&md5c, buffer, 32);
+ MD5Update(&md5c, s->session_id, 16);
+ MD5Final(buffer, &md5c);
+
+ send_packet(ssh, SSH1_CMSG_AUTH_RSA_RESPONSE,
+ PKT_DATA, buffer, 16, PKT_END);
+
+ freebn(challenge);
+ freebn(response);
+ }
+
+ crWaitUntil(pktin);
+ if (pktin->type == SSH1_SMSG_FAILURE) {
+ if (flags & FLAG_VERBOSE)
+ c_write_str(ssh, "Failed to authenticate with"
+ " our public key.\r\n");
+ continue; /* go and try password */
+ } else if (pktin->type != SSH1_SMSG_SUCCESS) {
+ bombout(("Bizarre response to RSA authentication response"));
+ crStop(0);
+ }
+
+ break; /* we're through! */
+ } else {
+ if (s->pwpkt_type == SSH1_CMSG_AUTH_PASSWORD) {
+ /*
+ * Defence against traffic analysis: we send a
+ * whole bunch of packets containing strings of
+ * different lengths. One of these strings is the
+ * password, in a SSH1_CMSG_AUTH_PASSWORD packet.
+ * The others are all random data in
+ * SSH1_MSG_IGNORE packets. This way a passive
+ * listener can't tell which is the password, and
+ * hence can't deduce the password length.
+ *
+ * Anybody with a password length greater than 16
+ * bytes is going to have enough entropy in their
+ * password that a listener won't find it _that_
+ * much help to know how long it is. So what we'll
+ * do is:
+ *
+ * - if password length < 16, we send 15 packets
+ * containing string lengths 1 through 15
+ *
+ * - otherwise, we let N be the nearest multiple
+ * of 8 below the password length, and send 8
+ * packets containing string lengths N through
+ * N+7. This won't obscure the order of
+ * magnitude of the password length, but it will
+ * introduce a bit of extra uncertainty.
+ *
+ * A few servers (the old 1.2.18 through 1.2.22)
+ * can't deal with SSH1_MSG_IGNORE. For these
+ * servers, we need an alternative defence. We make
+ * use of the fact that the password is interpreted
+ * as a C string: so we can append a NUL, then some
+ * random data.
+ *
+ * One server (a Cisco one) can deal with neither
+ * SSH1_MSG_IGNORE _nor_ a padded password string.
+ * For this server we are left with no defences
+ * against password length sniffing.
+ */
+ if (!(ssh->remote_bugs & BUG_CHOKES_ON_SSH1_IGNORE)) {
+ /*
+ * The server can deal with SSH1_MSG_IGNORE, so
+ * we can use the primary defence.
+ */
+ int bottom, top, pwlen, i;
+ char *randomstr;
+
+ pwlen = strlen(s->password);
+ if (pwlen < 16) {
+ bottom = 0; /* zero length passwords are OK! :-) */
+ top = 15;
+ } else {
+ bottom = pwlen & ~7;
+ top = bottom + 7;
+ }
+
+ assert(pwlen >= bottom && pwlen <= top);
+
+ randomstr = snewn(top + 1, char);
+
+ for (i = bottom; i <= top; i++) {
+ if (i == pwlen) {
+ defer_packet(ssh, s->pwpkt_type,
+ PKTT_PASSWORD, PKT_STR, s->password,
+ PKTT_OTHER, PKT_END);
+ } else {
+ for (j = 0; j < i; j++) {
+ do {
+ randomstr[j] = random_byte();
+ } while (randomstr[j] == '\0');
+ }
+ randomstr[i] = '\0';
+ defer_packet(ssh, SSH1_MSG_IGNORE,
+ PKT_STR, randomstr, PKT_END);
+ }
+ }
+ logevent("Sending password with camouflage packets");
+ ssh_pkt_defersend(ssh);
+ sfree(randomstr);
+ }
+ else if (!(ssh->remote_bugs & BUG_NEEDS_SSH1_PLAIN_PASSWORD)) {
+ /*
+ * The server can't deal with SSH1_MSG_IGNORE
+ * but can deal with padded passwords, so we
+ * can use the secondary defence.
+ */
+ char string[64];
+ char *ss;
+ int len;
+
+ len = strlen(s->password);
+ if (len < sizeof(string)) {
+ ss = string;
+ strcpy(string, s->password);
+ len++; /* cover the zero byte */
+ while (len < sizeof(string)) {
+ string[len++] = (char) random_byte();
+ }
+ } else {
+ ss = s->password;
+ }
+ logevent("Sending length-padded password");
+ send_packet(ssh, s->pwpkt_type, PKTT_PASSWORD,
+ PKT_INT, len, PKT_DATA, ss, len,
+ PKTT_OTHER, PKT_END);
+ } else {
+ /*
+ * The server has _both_
+ * BUG_CHOKES_ON_SSH1_IGNORE and
+ * BUG_NEEDS_SSH1_PLAIN_PASSWORD. There is
+ * therefore nothing we can do.
+ */
+ int len;
+ len = strlen(s->password);
+ logevent("Sending unpadded password");
+ send_packet(ssh, s->pwpkt_type,
+ PKTT_PASSWORD, PKT_INT, len,
+ PKT_DATA, s->password, len,
+ PKTT_OTHER, PKT_END);
+ }
+ } else {
+ send_packet(ssh, s->pwpkt_type, PKTT_PASSWORD,
+ PKT_STR, s->password, PKTT_OTHER, PKT_END);
+ }
+ }
+ logevent("Sent password");
+ memset(s->password, 0, strlen(s->password));
+ crWaitUntil(pktin);
+ if (pktin->type == SSH1_SMSG_FAILURE) {
+ if (flags & FLAG_VERBOSE)
+ c_write_str(ssh, "Access denied\r\n");
+ logevent("Authentication refused");
+ } else if (pktin->type != SSH1_SMSG_SUCCESS) {
+ bombout(("Strange packet received, type %d", pktin->type));
+ crStop(0);
+ }
+ }
+
+ logevent("Authentication successful");
+
+ crFinish(1);
+}
+
+void sshfwd_close(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+
+ if (ssh->state != SSH_STATE_SESSION) {
+ assert(ssh->state == SSH_STATE_CLOSED);
+ return;
+ }
+
+ if (c && !c->closes) {
+ /*
+ * If the channel's remoteid is -1, we have sent
+ * CHANNEL_OPEN for this channel, but it hasn't even been
+ * acknowledged by the server. So we must set a close flag
+ * on it now, and then when the server acks the channel
+ * open, we can close it then.
+ */
+ if (((int)c->remoteid) != -1) {
+ if (ssh->version == 1) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE, PKT_INT, c->remoteid,
+ PKT_END);
+ } else {
+ struct Packet *pktout;
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_send(ssh, pktout);
+ }
+ }
+ c->closes = 1; /* sent MSG_CLOSE */
+ if (c->type == CHAN_X11) {
+ c->u.x11.s = NULL;
+ logevent("Forwarded X11 connection terminated");
+ } else if (c->type == CHAN_SOCKDATA ||
+ c->type == CHAN_SOCKDATA_DORMANT) {
+ c->u.pfd.s = NULL;
+ logevent("Forwarded port closed");
+ }
+ }
+}
+
+int sshfwd_write(struct ssh_channel *c, char *buf, int len)
+{
+ Ssh ssh = c->ssh;
+
+ if (ssh->state != SSH_STATE_SESSION) {
+ assert(ssh->state == SSH_STATE_CLOSED);
+ return 0;
+ }
+
+ if (ssh->version == 1) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_DATA,
+ PKT_INT, c->remoteid,
+ PKTT_DATA,
+ PKT_INT, len, PKT_DATA, buf, len,
+ PKTT_OTHER, PKT_END);
+ /*
+ * In SSH1 we can return 0 here - implying that forwarded
+ * connections are never individually throttled - because
+ * the only circumstance that can cause throttling will be
+ * the whole SSH connection backing up, in which case
+ * _everything_ will be throttled as a whole.
+ */
+ return 0;
+ } else {
+ ssh2_add_channel_data(c, buf, len);
+ return ssh2_try_send(c);
+ }
+}
+
+void sshfwd_unthrottle(struct ssh_channel *c, int bufsize)
+{
+ Ssh ssh = c->ssh;
+
+ if (ssh->state != SSH_STATE_SESSION) {
+ assert(ssh->state == SSH_STATE_CLOSED);
+ return;
+ }
+
+ if (ssh->version == 1) {
+ if (c->v.v1.throttling && bufsize < SSH1_BUFFER_LIMIT) {
+ c->v.v1.throttling = 0;
+ ssh1_throttle(ssh, -1);
+ }
+ } else {
+ ssh2_set_window(c, OUR_V2_WINSIZE - bufsize);
+ }
+}
+
+static void ssh1_smsg_stdout_stderr_data(Ssh ssh, struct Packet *pktin)
+{
+ char *string;
+ int stringlen, bufsize;
+
+ ssh_pkt_getstring(pktin, &string, &stringlen);
+ if (string == NULL) {
+ bombout(("Incoming terminal data packet was badly formed"));
+ return;
+ }
+
+ bufsize = from_backend(ssh->frontend, pktin->type == SSH1_SMSG_STDERR_DATA,
+ string, stringlen);
+ if (!ssh->v1_stdout_throttling && bufsize > SSH1_BUFFER_LIMIT) {
+ ssh->v1_stdout_throttling = 1;
+ ssh1_throttle(ssh, +1);
+ }
+}
+
+static void ssh1_smsg_x11_open(Ssh ssh, struct Packet *pktin)
+{
+ /* Remote side is trying to open a channel to talk to our
+ * X-Server. Give them back a local channel number. */
+ struct ssh_channel *c;
+ int remoteid = ssh_pkt_getuint32(pktin);
+
+ logevent("Received X11 connect request");
+ /* Refuse if X11 forwarding is disabled. */
+ if (!ssh->X11_fwd_enabled) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
+ PKT_INT, remoteid, PKT_END);
+ logevent("Rejected X11 connect request");
+ } else {
+ c = snew(struct ssh_channel);
+ c->ssh = ssh;
+
+ if (x11_init(&c->u.x11.s, ssh->cfg.x11_display, c,
+ ssh->x11auth, NULL, -1, &ssh->cfg) != NULL) {
+ logevent("Opening X11 forward connection failed");
+ sfree(c);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
+ PKT_INT, remoteid, PKT_END);
+ } else {
+ logevent
+ ("Opening X11 forward connection succeeded");
+ c->remoteid = remoteid;
+ c->localid = alloc_channel_id(ssh);
+ c->closes = 0;
+ c->v.v1.throttling = 0;
+ c->type = CHAN_X11; /* identify channel type */
+ add234(ssh->channels, c);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
+ PKT_INT, c->remoteid, PKT_INT,
+ c->localid, PKT_END);
+ logevent("Opened X11 forward channel");
+ }
+ }
+}
+
+static void ssh1_smsg_agent_open(Ssh ssh, struct Packet *pktin)
+{
+ /* Remote side is trying to open a channel to talk to our
+ * agent. Give them back a local channel number. */
+ struct ssh_channel *c;
+ int remoteid = ssh_pkt_getuint32(pktin);
+
+ /* Refuse if agent forwarding is disabled. */
+ if (!ssh->agentfwd_enabled) {
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
+ PKT_INT, remoteid, PKT_END);
+ } else {
+ c = snew(struct ssh_channel);
+ c->ssh = ssh;
+ c->remoteid = remoteid;
+ c->localid = alloc_channel_id(ssh);
+ c->closes = 0;
+ c->v.v1.throttling = 0;
+ c->type = CHAN_AGENT; /* identify channel type */
+ c->u.a.lensofar = 0;
+ add234(ssh->channels, c);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
+ PKT_INT, c->remoteid, PKT_INT, c->localid,
+ PKT_END);
+ }
+}
+
+static void ssh1_msg_port_open(Ssh ssh, struct Packet *pktin)
+{
+ /* Remote side is trying to open a channel to talk to a
+ * forwarded port. Give them back a local channel number. */
+ struct ssh_channel *c;
+ struct ssh_rportfwd pf;
+ int remoteid;
+ int hostsize, port;
+ char *host, buf[1024];
+ const char *e;
+ c = snew(struct ssh_channel);
+ c->ssh = ssh;
+
+ remoteid = ssh_pkt_getuint32(pktin);
+ ssh_pkt_getstring(pktin, &host, &hostsize);
+ port = ssh_pkt_getuint32(pktin);
+
+ if (hostsize >= lenof(pf.dhost))
+ hostsize = lenof(pf.dhost)-1;
+ memcpy(pf.dhost, host, hostsize);
+ pf.dhost[hostsize] = '\0';
+ pf.dport = port;
+
+ if (find234(ssh->rportfwds, &pf, NULL) == NULL) {
+ sprintf(buf, "Rejected remote port open request for %s:%d",
+ pf.dhost, port);
+ logevent(buf);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
+ PKT_INT, remoteid, PKT_END);
+ } else {
+ sprintf(buf, "Received remote port open request for %s:%d",
+ pf.dhost, port);
+ logevent(buf);
+ e = pfd_newconnect(&c->u.pfd.s, pf.dhost, port,
+ c, &ssh->cfg);
+ if (e != NULL) {
+ char buf[256];
+ sprintf(buf, "Port open failed: %s", e);
+ logevent(buf);
+ sfree(c);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_FAILURE,
+ PKT_INT, remoteid, PKT_END);
+ } else {
+ c->remoteid = remoteid;
+ c->localid = alloc_channel_id(ssh);
+ c->closes = 0;
+ c->v.v1.throttling = 0;
+ c->type = CHAN_SOCKDATA; /* identify channel type */
+ add234(ssh->channels, c);
+ send_packet(ssh, SSH1_MSG_CHANNEL_OPEN_CONFIRMATION,
+ PKT_INT, c->remoteid, PKT_INT,
+ c->localid, PKT_END);
+ logevent("Forwarded port opened successfully");
+ }
+ }
+}
+
+static void ssh1_msg_channel_open_confirmation(Ssh ssh, struct Packet *pktin)
+{
+ unsigned int remoteid = ssh_pkt_getuint32(pktin);
+ unsigned int localid = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+
+ c = find234(ssh->channels, &remoteid, ssh_channelfind);
+ if (c && c->type == CHAN_SOCKDATA_DORMANT) {
+ c->remoteid = localid;
+ c->type = CHAN_SOCKDATA;
+ c->v.v1.throttling = 0;
+ pfd_confirm(c->u.pfd.s);
+ }
+
+ if (c && c->closes) {
+ /*
+ * We have a pending close on this channel,
+ * which we decided on before the server acked
+ * the channel open. So now we know the
+ * remoteid, we can close it again.
+ */
+ send_packet(ssh, SSH1_MSG_CHANNEL_CLOSE,
+ PKT_INT, c->remoteid, PKT_END);
+ }
+}
+
+static void ssh1_msg_channel_open_failure(Ssh ssh, struct Packet *pktin)
+{
+ unsigned int remoteid = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+
+ c = find234(ssh->channels, &remoteid, ssh_channelfind);
+ if (c && c->type == CHAN_SOCKDATA_DORMANT) {
+ logevent("Forwarded connection refused by server");
+ pfd_close(c->u.pfd.s);
+ del234(ssh->channels, c);
+ sfree(c);
+ }
+}
+
+static void ssh1_msg_channel_close(Ssh ssh, struct Packet *pktin)
+{
+ /* Remote side closes a channel. */
+ unsigned i = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+ c = find234(ssh->channels, &i, ssh_channelfind);
+ if (c && ((int)c->remoteid) != -1) {
+ int closetype;
+ closetype =
+ (pktin->type == SSH1_MSG_CHANNEL_CLOSE ? 1 : 2);
+
+ if ((c->closes == 0) && (c->type == CHAN_X11)) {
+ logevent("Forwarded X11 connection terminated");
+ assert(c->u.x11.s != NULL);
+ x11_close(c->u.x11.s);
+ c->u.x11.s = NULL;
+ }
+ if ((c->closes == 0) && (c->type == CHAN_SOCKDATA)) {
+ logevent("Forwarded port closed");
+ assert(c->u.pfd.s != NULL);
+ pfd_close(c->u.pfd.s);
+ c->u.pfd.s = NULL;
+ }
+
+ c->closes |= (closetype << 2); /* seen this message */
+ if (!(c->closes & closetype)) {
+ send_packet(ssh, pktin->type, PKT_INT, c->remoteid,
+ PKT_END);
+ c->closes |= closetype; /* sent it too */
+ }
+
+ if (c->closes == 15) {
+ del234(ssh->channels, c);
+ sfree(c);
+ }
+ } else {
+ bombout(("Received CHANNEL_CLOSE%s for %s channel %d\n",
+ pktin->type == SSH1_MSG_CHANNEL_CLOSE ? "" :
+ "_CONFIRMATION", c ? "half-open" : "nonexistent",
+ i));
+ }
+}
+
+static void ssh1_msg_channel_data(Ssh ssh, struct Packet *pktin)
+{
+ /* Data sent down one of our channels. */
+ int i = ssh_pkt_getuint32(pktin);
+ char *p;
+ int len;
+ struct ssh_channel *c;
+
+ ssh_pkt_getstring(pktin, &p, &len);
+
+ c = find234(ssh->channels, &i, ssh_channelfind);
+ if (c) {
+ int bufsize = 0;
+ switch (c->type) {
+ case CHAN_X11:
+ bufsize = x11_send(c->u.x11.s, p, len);
+ break;
+ case CHAN_SOCKDATA:
+ bufsize = pfd_send(c->u.pfd.s, p, len);
+ break;
+ case CHAN_AGENT:
+ /* Data for an agent message. Buffer it. */
+ while (len > 0) {
+ if (c->u.a.lensofar < 4) {
+ int l = min(4 - c->u.a.lensofar, len);
+ memcpy(c->u.a.msglen + c->u.a.lensofar, p,
+ l);
+ p += l;
+ len -= l;
+ c->u.a.lensofar += l;
+ }
+ if (c->u.a.lensofar == 4) {
+ c->u.a.totallen =
+ 4 + GET_32BIT(c->u.a.msglen);
+ c->u.a.message = snewn(c->u.a.totallen,
+ unsigned char);
+ memcpy(c->u.a.message, c->u.a.msglen, 4);
+ }
+ if (c->u.a.lensofar >= 4 && len > 0) {
+ int l =
+ min(c->u.a.totallen - c->u.a.lensofar,
+ len);
+ memcpy(c->u.a.message + c->u.a.lensofar, p,
+ l);
+ p += l;
+ len -= l;
+ c->u.a.lensofar += l;
+ }
+ if (c->u.a.lensofar == c->u.a.totallen) {
+ void *reply;
+ int replylen;
+ if (agent_query(c->u.a.message,
+ c->u.a.totallen,
+ &reply, &replylen,
+ ssh_agentf_callback, c))
+ ssh_agentf_callback(c, reply, replylen);
+ sfree(c->u.a.message);
+ c->u.a.lensofar = 0;
+ }
+ }
+ bufsize = 0; /* agent channels never back up */
+ break;
+ }
+ if (!c->v.v1.throttling && bufsize > SSH1_BUFFER_LIMIT) {
+ c->v.v1.throttling = 1;
+ ssh1_throttle(ssh, +1);
+ }
+ }
+}
+
+static void ssh1_smsg_exit_status(Ssh ssh, struct Packet *pktin)
+{
+ char buf[100];
+ ssh->exitcode = ssh_pkt_getuint32(pktin);
+ sprintf(buf, "Server sent command exit status %d",
+ ssh->exitcode);
+ logevent(buf);
+ send_packet(ssh, SSH1_CMSG_EXIT_CONFIRMATION, PKT_END);
+ /*
+ * In case `helpful' firewalls or proxies tack
+ * extra human-readable text on the end of the
+ * session which we might mistake for another
+ * encrypted packet, we close the session once
+ * we've sent EXIT_CONFIRMATION.
+ */
+ ssh_closing((Plug)ssh, NULL, 0, 0);
+}
+
+static void do_ssh1_connection(Ssh ssh, unsigned char *in, int inlen,
+ struct Packet *pktin)
+{
+ crBegin(ssh->do_ssh1_connection_crstate);
+
+ ssh->packet_dispatch[SSH1_SMSG_STDOUT_DATA] =
+ ssh->packet_dispatch[SSH1_SMSG_STDERR_DATA] =
+ ssh1_smsg_stdout_stderr_data;
+
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_OPEN_CONFIRMATION] =
+ ssh1_msg_channel_open_confirmation;
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_OPEN_FAILURE] =
+ ssh1_msg_channel_open_failure;
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_CLOSE] =
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION] =
+ ssh1_msg_channel_close;
+ ssh->packet_dispatch[SSH1_MSG_CHANNEL_DATA] = ssh1_msg_channel_data;
+ ssh->packet_dispatch[SSH1_SMSG_EXIT_STATUS] = ssh1_smsg_exit_status;
+
+ if (ssh->cfg.agentfwd && agent_exists()) {
+ logevent("Requesting agent forwarding");
+ send_packet(ssh, SSH1_CMSG_AGENT_REQUEST_FORWARDING, PKT_END);
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ logevent("Agent forwarding refused");
+ } else {
+ logevent("Agent forwarding enabled");
+ ssh->agentfwd_enabled = TRUE;
+ ssh->packet_dispatch[SSH1_SMSG_AGENT_OPEN] = ssh1_smsg_agent_open;
+ }
+ }
+
+ if (ssh->cfg.x11_forward) {
+ char proto[20], data[64];
+ logevent("Requesting X11 forwarding");
+ ssh->x11auth = x11_invent_auth(proto, sizeof(proto),
+ data, sizeof(data), ssh->cfg.x11_auth);
+ x11_get_real_auth(ssh->x11auth, ssh->cfg.x11_display);
+ if (ssh->v1_local_protoflags & SSH1_PROTOFLAG_SCREEN_NUMBER) {
+ send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
+ PKT_STR, proto, PKT_STR, data,
+ PKT_INT, x11_get_screen_number(ssh->cfg.x11_display),
+ PKT_END);
+ } else {
+ send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
+ PKT_STR, proto, PKT_STR, data, PKT_END);
+ }
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ logevent("X11 forwarding refused");
+ } else {
+ logevent("X11 forwarding enabled");
+ ssh->X11_fwd_enabled = TRUE;
+ ssh->packet_dispatch[SSH1_SMSG_X11_OPEN] = ssh1_smsg_x11_open;
+ }
+ }
+
+ {
+ char type;
+ int n;
+ int sport,dport,sserv,dserv;
+ char sports[256], dports[256], saddr[256], host[256];
+
+ ssh->rportfwds = newtree234(ssh_rportcmp_ssh1);
+ /* Add port forwardings. */
+ ssh->portfwd_strptr = ssh->cfg.portfwd;
+ while (*ssh->portfwd_strptr) {
+ type = *ssh->portfwd_strptr++;
+ saddr[0] = '\0';
+ n = 0;
+ while (*ssh->portfwd_strptr && *ssh->portfwd_strptr != '\t') {
+ if (*ssh->portfwd_strptr == ':') {
+ /*
+ * We've seen a colon in the middle of the
+ * source port number. This means that
+ * everything we've seen until now is the
+ * source _address_, so we'll move it into
+ * saddr and start sports from the beginning
+ * again.
+ */
+ ssh->portfwd_strptr++;
+ sports[n] = '\0';
+ strcpy(saddr, sports);
+ n = 0;
+ }
+ if (n < 255) sports[n++] = *ssh->portfwd_strptr++;
+ }
+ sports[n] = 0;
+ if (type != 'D') {
+ if (*ssh->portfwd_strptr == '\t')
+ ssh->portfwd_strptr++;
+ n = 0;
+ while (*ssh->portfwd_strptr && *ssh->portfwd_strptr != ':') {
+ if (n < 255) host[n++] = *ssh->portfwd_strptr++;
+ }
+ host[n] = 0;
+ if (*ssh->portfwd_strptr == ':')
+ ssh->portfwd_strptr++;
+ n = 0;
+ while (*ssh->portfwd_strptr) {
+ if (n < 255) dports[n++] = *ssh->portfwd_strptr++;
+ }
+ dports[n] = 0;
+ ssh->portfwd_strptr++;
+ dport = atoi(dports);
+ dserv = 0;
+ if (dport == 0) {
+ dserv = 1;
+ dport = net_service_lookup(dports);
+ if (!dport) {
+ logeventf(ssh, "Service lookup failed for"
+ " destination port \"%s\"", dports);
+ }
+ }
+ } else {
+ while (*ssh->portfwd_strptr) ssh->portfwd_strptr++;
+ dport = dserv = -1;
+ ssh->portfwd_strptr++; /* eat the NUL and move to next one */
+ }
+ sport = atoi(sports);
+ sserv = 0;
+ if (sport == 0) {
+ sserv = 1;
+ sport = net_service_lookup(sports);
+ if (!sport) {
+ logeventf(ssh, "Service lookup failed for source"
+ " port \"%s\"", sports);
+ }
+ }
+ if (sport && dport) {
+ /* Set up a description of the source port. */
+ static char *sportdesc;
+ sportdesc = dupprintf("%.*s%.*s%.*s%.*s%d%.*s",
+ (int)(*saddr?strlen(saddr):0), *saddr?saddr:NULL,
+ (int)(*saddr?1:0), ":",
+ (int)(sserv ? strlen(sports) : 0), sports,
+ sserv, "(", sport, sserv, ")");
+ if (type == 'L') {
+ /* Verbose description of the destination port */
+ char *dportdesc = dupprintf("%s:%.*s%.*s%d%.*s",
+ host,
+ (int)(dserv ? strlen(dports) : 0), dports,
+ dserv, "(", dport, dserv, ")");
+ const char *err = pfd_addforward(host, dport,
+ *saddr ? saddr : NULL,
+ sport, ssh, &ssh->cfg);
+ if (err) {
+ logeventf(ssh, "Local port %s forward to %s"
+ " failed: %s", sportdesc, dportdesc, err);
+ } else {
+ logeventf(ssh, "Local port %s forwarding to %s",
+ sportdesc, dportdesc);
+ }
+ sfree(dportdesc);
+ } else if (type == 'D') {
+ const char *err = pfd_addforward(NULL, -1,
+ *saddr ? saddr : NULL,
+ sport, ssh, &ssh->cfg);
+ if (err) {
+ logeventf(ssh, "Local port %s SOCKS dynamic forward"
+ " setup failed: %s", sportdesc, err);
+ } else {
+ logeventf(ssh, "Local port %s doing SOCKS"
+ " dynamic forwarding", sportdesc);
+ }
+ } else {
+ struct ssh_rportfwd *pf;
+ pf = snew(struct ssh_rportfwd);
+ strcpy(pf->dhost, host);
+ pf->dport = dport;
+ if (*saddr) {
+ logeventf(ssh,
+ "SSH1 cannot handle source address spec \"%s:%d\"; ignoring",
+ saddr, sport);
+ }
+ if (add234(ssh->rportfwds, pf) != pf) {
+ logeventf(ssh,
+ "Duplicate remote port forwarding to %s:%d",
+ host, dport);
+ sfree(pf);
+ } else {
+ logeventf(ssh, "Requesting remote port %.*s%.*s%d%.*s"
+ " forward to %s:%.*s%.*s%d%.*s",
+ (int)(sserv ? strlen(sports) : 0), sports,
+ sserv, "(", sport, sserv, ")",
+ host,
+ (int)(dserv ? strlen(dports) : 0), dports,
+ dserv, "(", dport, dserv, ")");
+ send_packet(ssh, SSH1_CMSG_PORT_FORWARD_REQUEST,
+ PKT_INT, sport,
+ PKT_STR, host,
+ PKT_INT, dport,
+ PKT_END);
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused port"
+ " forwarding\r\n");
+ logevent("Server refused this port forwarding");
+ } else {
+ logevent("Remote port forwarding enabled");
+ ssh->packet_dispatch[SSH1_MSG_PORT_OPEN] =
+ ssh1_msg_port_open;
+ }
+ }
+ }
+ sfree(sportdesc);
+ }
+ }
+ }
+
+ if (!ssh->cfg.nopty) {
+ /* Unpick the terminal-speed string. */
+ /* XXX perhaps we should allow no speeds to be sent. */
+ ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
+ sscanf(ssh->cfg.termspeed, "%d,%d", &ssh->ospeed, &ssh->ispeed);
+ /* Send the pty request. */
+ send_packet(ssh, SSH1_CMSG_REQUEST_PTY,
+ PKT_STR, ssh->cfg.termtype,
+ PKT_INT, ssh->term_height,
+ PKT_INT, ssh->term_width,
+ PKT_INT, 0, PKT_INT, 0, /* width,height in pixels */
+ PKT_CHAR, 192, PKT_INT, ssh->ispeed, /* TTY_OP_ISPEED */
+ PKT_CHAR, 193, PKT_INT, ssh->ospeed, /* TTY_OP_OSPEED */
+ PKT_CHAR, 0, PKT_END);
+ ssh->state = SSH_STATE_INTERMED;
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused to allocate pty\r\n");
+ ssh->editing = ssh->echoing = 1;
+ }
+ logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
+ ssh->ospeed, ssh->ispeed);
+ } else {
+ ssh->editing = ssh->echoing = 1;
+ }
+
+ if (ssh->cfg.compression) {
+ send_packet(ssh, SSH1_CMSG_REQUEST_COMPRESSION, PKT_INT, 6, PKT_END);
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused to compress\r\n");
+ }
+ logevent("Started compression");
+ ssh->v1_compressing = TRUE;
+ ssh->cs_comp_ctx = zlib_compress_init();
+ logevent("Initialised zlib (RFC1950) compression");
+ ssh->sc_comp_ctx = zlib_decompress_init();
+ logevent("Initialised zlib (RFC1950) decompression");
+ }
+
+ /*
+ * Start the shell or command.
+ *
+ * Special case: if the first-choice command is an SSH2
+ * subsystem (hence not usable here) and the second choice
+ * exists, we fall straight back to that.
+ */
+ {
+ char *cmd = ssh->cfg.remote_cmd_ptr;
+
+ if (ssh->cfg.ssh_subsys && ssh->cfg.remote_cmd_ptr2) {
+ cmd = ssh->cfg.remote_cmd_ptr2;
+ ssh->fallback_cmd = TRUE;
+ }
+ if (*cmd)
+ send_packet(ssh, SSH1_CMSG_EXEC_CMD, PKT_STR, cmd, PKT_END);
+ else
+ send_packet(ssh, SSH1_CMSG_EXEC_SHELL, PKT_END);
+ logevent("Started session");
+ }
+
+ ssh->state = SSH_STATE_SESSION;
+ if (ssh->size_needed)
+ ssh_size(ssh, ssh->term_width, ssh->term_height);
+ if (ssh->eof_needed)
+ ssh_special(ssh, TS_EOF);
+
+ if (ssh->ldisc)
+ ldisc_send(ssh->ldisc, NULL, 0, 0);/* cause ldisc to notice changes */
+ ssh->send_ok = 1;
+ ssh->channels = newtree234(ssh_channelcmp);
+ while (1) {
+
+ /*
+ * By this point, most incoming packets are already being
+ * handled by the dispatch table, and we need only pay
+ * attention to the unusual ones.
+ */
+
+ crReturnV;
+ if (pktin) {
+ if (pktin->type == SSH1_SMSG_SUCCESS) {
+ /* may be from EXEC_SHELL on some servers */
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ /* may be from EXEC_SHELL on some servers
+ * if no pty is available or in other odd cases. Ignore */
+ } else {
+ bombout(("Strange packet received: type %d", pktin->type));
+ crStopV;
+ }
+ } else {
+ while (inlen > 0) {
+ int len = min(inlen, 512);
+ send_packet(ssh, SSH1_CMSG_STDIN_DATA, PKTT_DATA,
+ PKT_INT, len, PKT_DATA, in, len,
+ PKTT_OTHER, PKT_END);
+ in += len;
+ inlen -= len;
+ }
+ }
+ }
+
+ crFinishV;
+}
+
+/*
+ * Handle the top-level SSH2 protocol.
+ */
+static void ssh1_msg_debug(Ssh ssh, struct Packet *pktin)
+{
+ char *buf, *msg;
+ int msglen;
+
+ ssh_pkt_getstring(pktin, &msg, &msglen);
+ buf = dupprintf("Remote debug message: %.*s", msglen, msg);
+ logevent(buf);
+ sfree(buf);
+}
+
+static void ssh1_msg_disconnect(Ssh ssh, struct Packet *pktin)
+{
+ /* log reason code in disconnect message */
+ char *msg;
+ int msglen;
+
+ ssh_pkt_getstring(pktin, &msg, &msglen);
+ bombout(("Server sent disconnect message:\n\"%.*s\"", msglen, msg));
+}
+
+void ssh_msg_ignore(Ssh ssh, struct Packet *pktin)
+{
+ /* Do nothing, because we're ignoring it! Duhh. */
+}
+
+static void ssh1_protocol_setup(Ssh ssh)
+{
+ int i;
+
+ /*
+ * Most messages are handled by the coroutines.
+ */
+ for (i = 0; i < 256; i++)
+ ssh->packet_dispatch[i] = NULL;
+
+ /*
+ * These special message types we install handlers for.
+ */
+ ssh->packet_dispatch[SSH1_MSG_DISCONNECT] = ssh1_msg_disconnect;
+ ssh->packet_dispatch[SSH1_MSG_IGNORE] = ssh_msg_ignore;
+ ssh->packet_dispatch[SSH1_MSG_DEBUG] = ssh1_msg_debug;
+}
+
+static void ssh1_protocol(Ssh ssh, unsigned char *in, int inlen,
+ struct Packet *pktin)
+{
+ if (ssh->state == SSH_STATE_CLOSED)
+ return;
+
+ if (pktin && ssh->packet_dispatch[pktin->type]) {
+ ssh->packet_dispatch[pktin->type](ssh, pktin);
+ return;
+ }
+
+ if (!ssh->protocol_initial_phase_done) {
+ if (do_ssh1_login(ssh, in, inlen, pktin))
+ ssh->protocol_initial_phase_done = TRUE;
+ else
+ return;
+ }
+
+ do_ssh1_connection(ssh, in, inlen, pktin);
+}
+
+/*
+ * Utility routine for decoding comma-separated strings in KEXINIT.
+ */
+static int in_commasep_string(char *needle, char *haystack, int haylen)
+{
+ int needlen;
+ if (!needle || !haystack) /* protect against null pointers */