+ if (ssh->cfg.x11_forward) {
+ char proto[20], data[64];
+ logevent("Requesting X11 forwarding");
+ ssh->x11auth = x11_invent_auth(proto, sizeof(proto),
+ data, sizeof(data), ssh->cfg.x11_auth);
+ x11_get_real_auth(ssh->x11auth, ssh->cfg.x11_display);
+ if (ssh->v1_local_protoflags & SSH1_PROTOFLAG_SCREEN_NUMBER) {
+ send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
+ PKT_STR, proto, PKT_STR, data,
+ PKT_INT, x11_get_screen_number(ssh->cfg.x11_display),
+ PKT_END);
+ } else {
+ send_packet(ssh, SSH1_CMSG_X11_REQUEST_FORWARDING,
+ PKT_STR, proto, PKT_STR, data, PKT_END);
+ }
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ logevent("X11 forwarding refused");
+ } else {
+ logevent("X11 forwarding enabled");
+ ssh->X11_fwd_enabled = TRUE;
+ ssh->packet_dispatch[SSH1_SMSG_X11_OPEN] = ssh1_smsg_x11_open;
+ }
+ }
+
+ ssh_setup_portfwd(ssh, &ssh->cfg);
+ ssh->packet_dispatch[SSH1_MSG_PORT_OPEN] = ssh1_msg_port_open;
+
+ if (!ssh->cfg.nopty) {
+ struct Packet *pkt;
+ /* Unpick the terminal-speed string. */
+ /* XXX perhaps we should allow no speeds to be sent. */
+ ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
+ sscanf(ssh->cfg.termspeed, "%d,%d", &ssh->ospeed, &ssh->ispeed);
+ /* Send the pty request. */
+ pkt = ssh1_pkt_init(SSH1_CMSG_REQUEST_PTY);
+ ssh_pkt_addstring(pkt, ssh->cfg.termtype);
+ ssh_pkt_adduint32(pkt, ssh->term_height);
+ ssh_pkt_adduint32(pkt, ssh->term_width);
+ ssh_pkt_adduint32(pkt, 0); /* width in pixels */
+ ssh_pkt_adduint32(pkt, 0); /* height in pixels */
+ parse_ttymodes(ssh, ssh->cfg.ttymodes,
+ ssh1_send_ttymode, (void *)pkt);
+ ssh_pkt_addbyte(pkt, SSH1_TTY_OP_ISPEED);
+ ssh_pkt_adduint32(pkt, ssh->ispeed);
+ ssh_pkt_addbyte(pkt, SSH1_TTY_OP_OSPEED);
+ ssh_pkt_adduint32(pkt, ssh->ospeed);
+ ssh_pkt_addbyte(pkt, SSH_TTY_OP_END);
+ s_wrpkt(ssh, pkt);
+ ssh->state = SSH_STATE_INTERMED;
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused to allocate pty\r\n");
+ ssh->editing = ssh->echoing = 1;
+ }
+ logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
+ ssh->ospeed, ssh->ispeed);
+ } else {
+ ssh->editing = ssh->echoing = 1;
+ }
+
+ if (ssh->cfg.compression) {
+ send_packet(ssh, SSH1_CMSG_REQUEST_COMPRESSION, PKT_INT, 6, PKT_END);
+ do {
+ crReturnV;
+ } while (!pktin);
+ if (pktin->type != SSH1_SMSG_SUCCESS
+ && pktin->type != SSH1_SMSG_FAILURE) {
+ bombout(("Protocol confusion"));
+ crStopV;
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ c_write_str(ssh, "Server refused to compress\r\n");
+ }
+ logevent("Started compression");
+ ssh->v1_compressing = TRUE;
+ ssh->cs_comp_ctx = zlib_compress_init();
+ logevent("Initialised zlib (RFC1950) compression");
+ ssh->sc_comp_ctx = zlib_decompress_init();
+ logevent("Initialised zlib (RFC1950) decompression");
+ }
+
+ /*
+ * Start the shell or command.
+ *
+ * Special case: if the first-choice command is an SSH-2
+ * subsystem (hence not usable here) and the second choice
+ * exists, we fall straight back to that.
+ */
+ {
+ char *cmd = ssh->cfg.remote_cmd_ptr;
+
+ if (!cmd) cmd = ssh->cfg.remote_cmd;
+
+ if (ssh->cfg.ssh_subsys && ssh->cfg.remote_cmd_ptr2) {
+ cmd = ssh->cfg.remote_cmd_ptr2;
+ ssh->fallback_cmd = TRUE;
+ }
+ if (*cmd)
+ send_packet(ssh, SSH1_CMSG_EXEC_CMD, PKT_STR, cmd, PKT_END);
+ else
+ send_packet(ssh, SSH1_CMSG_EXEC_SHELL, PKT_END);
+ logevent("Started session");
+ }
+
+ ssh->state = SSH_STATE_SESSION;
+ if (ssh->size_needed)
+ ssh_size(ssh, ssh->term_width, ssh->term_height);
+ if (ssh->eof_needed)
+ ssh_special(ssh, TS_EOF);
+
+ if (ssh->ldisc)
+ ldisc_send(ssh->ldisc, NULL, 0, 0);/* cause ldisc to notice changes */
+ ssh->send_ok = 1;
+ ssh->channels = newtree234(ssh_channelcmp);
+ while (1) {
+
+ /*
+ * By this point, most incoming packets are already being
+ * handled by the dispatch table, and we need only pay
+ * attention to the unusual ones.
+ */
+
+ crReturnV;
+ if (pktin) {
+ if (pktin->type == SSH1_SMSG_SUCCESS) {
+ /* may be from EXEC_SHELL on some servers */
+ } else if (pktin->type == SSH1_SMSG_FAILURE) {
+ /* may be from EXEC_SHELL on some servers
+ * if no pty is available or in other odd cases. Ignore */
+ } else {
+ bombout(("Strange packet received: type %d", pktin->type));
+ crStopV;
+ }
+ } else {
+ while (inlen > 0) {
+ int len = min(inlen, 512);
+ send_packet(ssh, SSH1_CMSG_STDIN_DATA, PKTT_DATA,
+ PKT_INT, len, PKT_DATA, in, len,
+ PKTT_OTHER, PKT_END);
+ in += len;
+ inlen -= len;
+ }
+ }
+ }
+
+ crFinishV;
+}
+
+/*
+ * Handle the top-level SSH-2 protocol.
+ */
+static void ssh1_msg_debug(Ssh ssh, struct Packet *pktin)
+{
+ char *msg;
+ int msglen;
+
+ ssh_pkt_getstring(pktin, &msg, &msglen);
+ logeventf(ssh, "Remote debug message: %.*s", msglen, msg);
+}
+
+static void ssh1_msg_disconnect(Ssh ssh, struct Packet *pktin)
+{
+ /* log reason code in disconnect message */
+ char *msg;
+ int msglen;
+
+ ssh_pkt_getstring(pktin, &msg, &msglen);
+ bombout(("Server sent disconnect message:\n\"%.*s\"", msglen, msg));
+}
+
+static void ssh_msg_ignore(Ssh ssh, struct Packet *pktin)
+{
+ /* Do nothing, because we're ignoring it! Duhh. */
+}
+
+static void ssh1_protocol_setup(Ssh ssh)
+{
+ int i;
+
+ /*
+ * Most messages are handled by the coroutines.
+ */
+ for (i = 0; i < 256; i++)
+ ssh->packet_dispatch[i] = NULL;
+
+ /*
+ * These special message types we install handlers for.
+ */
+ ssh->packet_dispatch[SSH1_MSG_DISCONNECT] = ssh1_msg_disconnect;
+ ssh->packet_dispatch[SSH1_MSG_IGNORE] = ssh_msg_ignore;
+ ssh->packet_dispatch[SSH1_MSG_DEBUG] = ssh1_msg_debug;
+}
+
+static void ssh1_protocol(Ssh ssh, void *vin, int inlen,
+ struct Packet *pktin)
+{
+ unsigned char *in=(unsigned char*)vin;
+ if (ssh->state == SSH_STATE_CLOSED)
+ return;
+
+ if (pktin && ssh->packet_dispatch[pktin->type]) {
+ ssh->packet_dispatch[pktin->type](ssh, pktin);
+ return;
+ }
+
+ if (!ssh->protocol_initial_phase_done) {
+ if (do_ssh1_login(ssh, in, inlen, pktin))
+ ssh->protocol_initial_phase_done = TRUE;
+ else
+ return;
+ }
+
+ do_ssh1_connection(ssh, in, inlen, pktin);
+}
+
+/*
+ * Utility routine for decoding comma-separated strings in KEXINIT.
+ */
+static int in_commasep_string(char *needle, char *haystack, int haylen)
+{
+ int needlen;
+ if (!needle || !haystack) /* protect against null pointers */
+ return 0;
+ needlen = strlen(needle);
+ while (1) {
+ /*
+ * Is it at the start of the string?
+ */
+ if (haylen >= needlen && /* haystack is long enough */
+ !memcmp(needle, haystack, needlen) && /* initial match */
+ (haylen == needlen || haystack[needlen] == ',')
+ /* either , or EOS follows */
+ )
+ return 1;
+ /*
+ * If not, search for the next comma and resume after that.
+ * If no comma found, terminate.
+ */
+ while (haylen > 0 && *haystack != ',')
+ haylen--, haystack++;
+ if (haylen == 0)
+ return 0;
+ haylen--, haystack++; /* skip over comma itself */
+ }
+}
+
+/*
+ * Similar routine for checking whether we have the first string in a list.
+ */
+static int first_in_commasep_string(char *needle, char *haystack, int haylen)
+{
+ int needlen;
+ if (!needle || !haystack) /* protect against null pointers */
+ return 0;
+ needlen = strlen(needle);
+ /*
+ * Is it at the start of the string?
+ */
+ if (haylen >= needlen && /* haystack is long enough */
+ !memcmp(needle, haystack, needlen) && /* initial match */
+ (haylen == needlen || haystack[needlen] == ',')
+ /* either , or EOS follows */
+ )
+ return 1;
+ return 0;
+}
+
+
+/*
+ * SSH-2 key creation method.
+ */
+static void ssh2_mkkey(Ssh ssh, Bignum K, unsigned char *H,
+ unsigned char *sessid, char chr,
+ unsigned char *keyspace)
+{
+ SHA_State s;
+ /* First 20 bytes. */
+ SHA_Init(&s);
+ if (!(ssh->remote_bugs & BUG_SSH2_DERIVEKEY))
+ sha_mpint(&s, K);
+ SHA_Bytes(&s, H, 20);
+ SHA_Bytes(&s, &chr, 1);
+ SHA_Bytes(&s, sessid, 20);
+ SHA_Final(&s, keyspace);
+ /* Next 20 bytes. */
+ SHA_Init(&s);
+ if (!(ssh->remote_bugs & BUG_SSH2_DERIVEKEY))
+ sha_mpint(&s, K);
+ SHA_Bytes(&s, H, 20);
+ SHA_Bytes(&s, keyspace, 20);
+ SHA_Final(&s, keyspace + 20);
+}
+
+/*
+ * Handle the SSH-2 transport layer.
+ */
+static int do_ssh2_transport(Ssh ssh, void *vin, int inlen,
+ struct Packet *pktin)
+{
+ unsigned char *in = (unsigned char *)vin;
+ struct do_ssh2_transport_state {
+ int nbits, pbits, warn_kex, warn_cscipher, warn_sccipher;
+ Bignum p, g, e, f, K;
+ int kex_init_value, kex_reply_value;
+ const struct ssh_mac **maclist;
+ int nmacs;
+ const struct ssh2_cipher *cscipher_tobe;
+ const struct ssh2_cipher *sccipher_tobe;
+ const struct ssh_mac *csmac_tobe;
+ const struct ssh_mac *scmac_tobe;
+ const struct ssh_compress *cscomp_tobe;
+ const struct ssh_compress *sccomp_tobe;
+ char *hostkeydata, *sigdata, *keystr, *fingerprint;
+ int hostkeylen, siglen;
+ void *hkey; /* actual host key */
+ unsigned char exchange_hash[20];
+ int n_preferred_kex;
+ const struct ssh_kex *preferred_kex[KEX_MAX];
+ int n_preferred_ciphers;
+ const struct ssh2_ciphers *preferred_ciphers[CIPHER_MAX];
+ const struct ssh_compress *preferred_comp;
+ int got_session_id, activated_authconn;
+ struct Packet *pktout;
+ int dlgret;
+ int guessok;
+ int ignorepkt;
+ };
+ crState(do_ssh2_transport_state);
+
+ crBegin(ssh->do_ssh2_transport_crstate);
+
+ s->cscipher_tobe = s->sccipher_tobe = NULL;
+ s->csmac_tobe = s->scmac_tobe = NULL;
+ s->cscomp_tobe = s->sccomp_tobe = NULL;
+
+ s->got_session_id = s->activated_authconn = FALSE;
+
+ /*
+ * Be prepared to work around the buggy MAC problem.
+ */
+ if (ssh->remote_bugs & BUG_SSH2_HMAC)
+ s->maclist = buggymacs, s->nmacs = lenof(buggymacs);
+ else
+ s->maclist = macs, s->nmacs = lenof(macs);
+
+ begin_key_exchange:
+ ssh->pkt_ctx &= ~SSH2_PKTCTX_KEX_MASK;
+ {
+ int i, j, commalist_started;
+
+ /*
+ * Set up the preferred key exchange. (NULL => warn below here)
+ */
+ s->n_preferred_kex = 0;
+ for (i = 0; i < KEX_MAX; i++) {
+ switch (ssh->cfg.ssh_kexlist[i]) {
+ case KEX_DHGEX:
+ s->preferred_kex[s->n_preferred_kex++] =
+ &ssh_diffiehellman_gex;
+ break;
+ case KEX_DHGROUP14:
+ s->preferred_kex[s->n_preferred_kex++] =
+ &ssh_diffiehellman_group14;
+ break;
+ case KEX_DHGROUP1:
+ s->preferred_kex[s->n_preferred_kex++] =
+ &ssh_diffiehellman_group1;
+ break;
+ case CIPHER_WARN:
+ /* Flag for later. Don't bother if it's the last in
+ * the list. */
+ if (i < KEX_MAX - 1) {
+ s->preferred_kex[s->n_preferred_kex++] = NULL;
+ }
+ break;
+ }
+ }
+
+ /*
+ * Set up the preferred ciphers. (NULL => warn below here)
+ */
+ s->n_preferred_ciphers = 0;
+ for (i = 0; i < CIPHER_MAX; i++) {
+ switch (ssh->cfg.ssh_cipherlist[i]) {
+ case CIPHER_BLOWFISH:
+ s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_blowfish;
+ break;
+ case CIPHER_DES:
+ if (ssh->cfg.ssh2_des_cbc) {
+ s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_des;
+ }
+ break;
+ case CIPHER_3DES:
+ s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_3des;
+ break;
+ case CIPHER_AES:
+ s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_aes;
+ break;
+ case CIPHER_ARCFOUR:
+ s->preferred_ciphers[s->n_preferred_ciphers++] = &ssh2_arcfour;
+ break;
+ case CIPHER_WARN:
+ /* Flag for later. Don't bother if it's the last in
+ * the list. */
+ if (i < CIPHER_MAX - 1) {
+ s->preferred_ciphers[s->n_preferred_ciphers++] = NULL;
+ }
+ break;
+ }
+ }
+
+ /*
+ * Set up preferred compression.
+ */
+ if (ssh->cfg.compression)
+ s->preferred_comp = &ssh_zlib;
+ else
+ s->preferred_comp = &ssh_comp_none;
+
+ /*
+ * Enable queueing of outgoing auth- or connection-layer
+ * packets while we are in the middle of a key exchange.
+ */
+ ssh->queueing = TRUE;
+
+ /*
+ * Flag that KEX is in progress.
+ */
+ ssh->kex_in_progress = TRUE;
+
+ /*
+ * Construct and send our key exchange packet.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_KEXINIT);
+ for (i = 0; i < 16; i++)
+ ssh2_pkt_addbyte(s->pktout, (unsigned char) random_byte());
+ /* List key exchange algorithms. */
+ ssh2_pkt_addstring_start(s->pktout);
+ commalist_started = 0;
+ for (i = 0; i < s->n_preferred_kex; i++) {
+ const struct ssh_kex *k = s->preferred_kex[i];
+ if (!k) continue; /* warning flag */
+ if (commalist_started)
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, s->preferred_kex[i]->name);
+ commalist_started = 1;
+ }
+ /* List server host key algorithms. */
+ ssh2_pkt_addstring_start(s->pktout);
+ for (i = 0; i < lenof(hostkey_algs); i++) {
+ ssh2_pkt_addstring_str(s->pktout, hostkey_algs[i]->name);
+ if (i < lenof(hostkey_algs) - 1)
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ }
+ /* List client->server encryption algorithms. */
+ ssh2_pkt_addstring_start(s->pktout);
+ commalist_started = 0;
+ for (i = 0; i < s->n_preferred_ciphers; i++) {
+ const struct ssh2_ciphers *c = s->preferred_ciphers[i];
+ if (!c) continue; /* warning flag */
+ for (j = 0; j < c->nciphers; j++) {
+ if (commalist_started)
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, c->list[j]->name);
+ commalist_started = 1;
+ }
+ }
+ /* List server->client encryption algorithms. */
+ ssh2_pkt_addstring_start(s->pktout);
+ commalist_started = 0;
+ for (i = 0; i < s->n_preferred_ciphers; i++) {
+ const struct ssh2_ciphers *c = s->preferred_ciphers[i];
+ if (!c) continue; /* warning flag */
+ for (j = 0; j < c->nciphers; j++) {
+ if (commalist_started)
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, c->list[j]->name);
+ commalist_started = 1;
+ }
+ }
+ /* List client->server MAC algorithms. */
+ ssh2_pkt_addstring_start(s->pktout);
+ for (i = 0; i < s->nmacs; i++) {
+ ssh2_pkt_addstring_str(s->pktout, s->maclist[i]->name);
+ if (i < s->nmacs - 1)
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ }
+ /* List server->client MAC algorithms. */
+ ssh2_pkt_addstring_start(s->pktout);
+ for (i = 0; i < s->nmacs; i++) {
+ ssh2_pkt_addstring_str(s->pktout, s->maclist[i]->name);
+ if (i < s->nmacs - 1)
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ }
+ /* List client->server compression algorithms. */
+ ssh2_pkt_addstring_start(s->pktout);
+ assert(lenof(compressions) > 1);
+ ssh2_pkt_addstring_str(s->pktout, s->preferred_comp->name);
+ for (i = 0; i < lenof(compressions); i++) {
+ const struct ssh_compress *c = compressions[i];
+ if (c != s->preferred_comp) {
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, c->name);
+ }
+ }
+ /* List server->client compression algorithms. */
+ ssh2_pkt_addstring_start(s->pktout);
+ assert(lenof(compressions) > 1);
+ ssh2_pkt_addstring_str(s->pktout, s->preferred_comp->name);
+ for (i = 0; i < lenof(compressions); i++) {
+ const struct ssh_compress *c = compressions[i];
+ if (c != s->preferred_comp) {
+ ssh2_pkt_addstring_str(s->pktout, ",");
+ ssh2_pkt_addstring_str(s->pktout, c->name);
+ }
+ }
+ /* List client->server languages. Empty list. */
+ ssh2_pkt_addstring_start(s->pktout);
+ /* List server->client languages. Empty list. */
+ ssh2_pkt_addstring_start(s->pktout);
+ /* First KEX packet does _not_ follow, because we're not that brave. */
+ ssh2_pkt_addbool(s->pktout, FALSE);
+ /* Reserved. */
+ ssh2_pkt_adduint32(s->pktout, 0);
+ }
+
+ ssh->exhash = ssh->exhashbase;
+ sha_string(&ssh->exhash, s->pktout->data + 5, s->pktout->length - 5);
+
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ if (!pktin)
+ crWaitUntil(pktin);
+ if (pktin->length > 5)
+ sha_string(&ssh->exhash, pktin->data + 5, pktin->length - 5);
+
+ /*
+ * Now examine the other side's KEXINIT to see what we're up
+ * to.
+ */
+ {
+ char *str, *preferred;
+ int i, j, len;
+
+ if (pktin->type != SSH2_MSG_KEXINIT) {
+ bombout(("expected key exchange packet from server"));
+ crStop(0);
+ }
+ ssh->kex = NULL;
+ ssh->hostkey = NULL;
+ s->cscipher_tobe = NULL;
+ s->sccipher_tobe = NULL;
+ s->csmac_tobe = NULL;
+ s->scmac_tobe = NULL;
+ s->cscomp_tobe = NULL;
+ s->sccomp_tobe = NULL;
+ s->warn_kex = s->warn_cscipher = s->warn_sccipher = FALSE;
+
+ pktin->savedpos += 16; /* skip garbage cookie */
+ ssh_pkt_getstring(pktin, &str, &len); /* key exchange algorithms */
+
+ preferred = NULL;
+ for (i = 0; i < s->n_preferred_kex; i++) {
+ const struct ssh_kex *k = s->preferred_kex[i];
+ if (!k) {
+ s->warn_kex = TRUE;
+ } else {
+ if (!preferred) preferred = k->name;
+ if (in_commasep_string(k->name, str, len))
+ ssh->kex = k;
+ }
+ if (ssh->kex)
+ break;
+ }
+ if (!ssh->kex) {
+ bombout(("Couldn't agree a key exchange algorithm (available: %s)",
+ str ? str : "(null)"));
+ crStop(0);
+ }
+ /*
+ * Note that the server's guess is considered wrong if it doesn't match
+ * the first algorithm in our list, even if it's still the algorithm
+ * we end up using.
+ */
+ s->guessok = first_in_commasep_string(preferred, str, len);
+ ssh_pkt_getstring(pktin, &str, &len); /* host key algorithms */
+ for (i = 0; i < lenof(hostkey_algs); i++) {
+ if (in_commasep_string(hostkey_algs[i]->name, str, len)) {
+ ssh->hostkey = hostkey_algs[i];
+ break;
+ }
+ }
+ s->guessok = s->guessok &&
+ first_in_commasep_string(hostkey_algs[0]->name, str, len);
+ ssh_pkt_getstring(pktin, &str, &len); /* client->server cipher */
+ for (i = 0; i < s->n_preferred_ciphers; i++) {
+ const struct ssh2_ciphers *c = s->preferred_ciphers[i];
+ if (!c) {
+ s->warn_cscipher = TRUE;
+ } else {
+ for (j = 0; j < c->nciphers; j++) {
+ if (in_commasep_string(c->list[j]->name, str, len)) {
+ s->cscipher_tobe = c->list[j];
+ break;
+ }
+ }
+ }
+ if (s->cscipher_tobe)
+ break;
+ }
+ if (!s->cscipher_tobe) {
+ bombout(("Couldn't agree a client-to-server cipher (available: %s)",
+ str ? str : "(null)"));
+ crStop(0);
+ }
+
+ ssh_pkt_getstring(pktin, &str, &len); /* server->client cipher */
+ for (i = 0; i < s->n_preferred_ciphers; i++) {
+ const struct ssh2_ciphers *c = s->preferred_ciphers[i];
+ if (!c) {
+ s->warn_sccipher = TRUE;
+ } else {
+ for (j = 0; j < c->nciphers; j++) {
+ if (in_commasep_string(c->list[j]->name, str, len)) {
+ s->sccipher_tobe = c->list[j];
+ break;
+ }
+ }
+ }
+ if (s->sccipher_tobe)
+ break;
+ }
+ if (!s->sccipher_tobe) {
+ bombout(("Couldn't agree a server-to-client cipher (available: %s)",
+ str ? str : "(null)"));
+ crStop(0);
+ }
+
+ ssh_pkt_getstring(pktin, &str, &len); /* client->server mac */
+ for (i = 0; i < s->nmacs; i++) {
+ if (in_commasep_string(s->maclist[i]->name, str, len)) {
+ s->csmac_tobe = s->maclist[i];
+ break;
+ }
+ }
+ ssh_pkt_getstring(pktin, &str, &len); /* server->client mac */
+ for (i = 0; i < s->nmacs; i++) {
+ if (in_commasep_string(s->maclist[i]->name, str, len)) {
+ s->scmac_tobe = s->maclist[i];
+ break;
+ }
+ }
+ ssh_pkt_getstring(pktin, &str, &len); /* client->server compression */
+ for (i = 0; i < lenof(compressions) + 1; i++) {
+ const struct ssh_compress *c =
+ i == 0 ? s->preferred_comp : compressions[i - 1];
+ if (in_commasep_string(c->name, str, len)) {
+ s->cscomp_tobe = c;
+ break;
+ }
+ }
+ ssh_pkt_getstring(pktin, &str, &len); /* server->client compression */
+ for (i = 0; i < lenof(compressions) + 1; i++) {
+ const struct ssh_compress *c =
+ i == 0 ? s->preferred_comp : compressions[i - 1];
+ if (in_commasep_string(c->name, str, len)) {
+ s->sccomp_tobe = c;
+ break;
+ }
+ }
+ ssh_pkt_getstring(pktin, &str, &len); /* client->server language */
+ ssh_pkt_getstring(pktin, &str, &len); /* server->client language */
+ s->ignorepkt = ssh2_pkt_getbool(pktin) && !s->guessok;
+
+ if (s->warn_kex) {
+ ssh_set_frozen(ssh, 1);
+ s->dlgret = askalg(ssh->frontend, "key-exchange algorithm",
+ ssh->kex->name,
+ ssh_dialog_callback, ssh);
+ if (s->dlgret < 0) {
+ do {
+ crReturn(0);
+ if (pktin) {
+ bombout(("Unexpected data from server while"
+ " waiting for user response"));
+ crStop(0);
+ }
+ } while (pktin || inlen > 0);
+ s->dlgret = ssh->user_response;
+ }
+ ssh_set_frozen(ssh, 0);
+ if (s->dlgret == 0) {
+ ssh->close_expected = TRUE;
+ ssh_closing((Plug)ssh, NULL, 0, 0);
+ crStop(0);
+ }
+ }
+
+ if (s->warn_cscipher) {
+ ssh_set_frozen(ssh, 1);
+ s->dlgret = askalg(ssh->frontend,
+ "client-to-server cipher",
+ s->cscipher_tobe->name,
+ ssh_dialog_callback, ssh);
+ if (s->dlgret < 0) {
+ do {
+ crReturn(0);
+ if (pktin) {
+ bombout(("Unexpected data from server while"
+ " waiting for user response"));
+ crStop(0);
+ }
+ } while (pktin || inlen > 0);
+ s->dlgret = ssh->user_response;
+ }
+ ssh_set_frozen(ssh, 0);
+ if (s->dlgret == 0) {
+ ssh->close_expected = TRUE;
+ ssh_closing((Plug)ssh, NULL, 0, 0);
+ crStop(0);
+ }
+ }
+
+ if (s->warn_sccipher) {
+ ssh_set_frozen(ssh, 1);
+ s->dlgret = askalg(ssh->frontend,
+ "server-to-client cipher",
+ s->sccipher_tobe->name,
+ ssh_dialog_callback, ssh);
+ if (s->dlgret < 0) {
+ do {
+ crReturn(0);
+ if (pktin) {
+ bombout(("Unexpected data from server while"
+ " waiting for user response"));
+ crStop(0);
+ }
+ } while (pktin || inlen > 0);
+ s->dlgret = ssh->user_response;
+ }
+ ssh_set_frozen(ssh, 0);
+ if (s->dlgret == 0) {
+ ssh->close_expected = TRUE;
+ ssh_closing((Plug)ssh, NULL, 0, 0);
+ crStop(0);
+ }
+ }
+
+ if (s->ignorepkt) /* first_kex_packet_follows */
+ crWaitUntil(pktin); /* Ignore packet */
+ }
+
+ /*
+ * Work out the number of bits of key we will need from the key
+ * exchange. We start with the maximum key length of either
+ * cipher...
+ */
+ {
+ int csbits, scbits;
+
+ csbits = s->cscipher_tobe->keylen;
+ scbits = s->sccipher_tobe->keylen;
+ s->nbits = (csbits > scbits ? csbits : scbits);
+ }
+ /* The keys only have 160-bit entropy, since they're based on
+ * a SHA-1 hash. So cap the key size at 160 bits. */
+ if (s->nbits > 160)
+ s->nbits = 160;
+
+ /*
+ * If we're doing Diffie-Hellman group exchange, start by
+ * requesting a group.
+ */
+ if (!ssh->kex->pdata) {
+ logevent("Doing Diffie-Hellman group exchange");
+ ssh->pkt_ctx |= SSH2_PKTCTX_DHGEX;
+ /*
+ * Work out how big a DH group we will need to allow that
+ * much data.
+ */
+ s->pbits = 512 << ((s->nbits - 1) / 64);
+ s->pktout = ssh2_pkt_init(SSH2_MSG_KEX_DH_GEX_REQUEST);
+ ssh2_pkt_adduint32(s->pktout, s->pbits);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ crWaitUntil(pktin);
+ if (pktin->type != SSH2_MSG_KEX_DH_GEX_GROUP) {
+ bombout(("expected key exchange group packet from server"));
+ crStop(0);
+ }
+ s->p = ssh2_pkt_getmp(pktin);
+ s->g = ssh2_pkt_getmp(pktin);
+ if (!s->p || !s->g) {
+ bombout(("unable to read mp-ints from incoming group packet"));
+ crStop(0);
+ }
+ ssh->kex_ctx = dh_setup_gex(s->p, s->g);
+ s->kex_init_value = SSH2_MSG_KEX_DH_GEX_INIT;
+ s->kex_reply_value = SSH2_MSG_KEX_DH_GEX_REPLY;
+ } else {
+ ssh->pkt_ctx |= SSH2_PKTCTX_DHGROUP;
+ ssh->kex_ctx = dh_setup_group(ssh->kex);
+ s->kex_init_value = SSH2_MSG_KEXDH_INIT;
+ s->kex_reply_value = SSH2_MSG_KEXDH_REPLY;
+ logeventf(ssh, "Using Diffie-Hellman with standard group \"%s\"",
+ ssh->kex->groupname);
+ }
+
+ logevent("Doing Diffie-Hellman key exchange");
+ /*
+ * Now generate and send e for Diffie-Hellman.
+ */
+ set_busy_status(ssh->frontend, BUSY_CPU); /* this can take a while */
+ s->e = dh_create_e(ssh->kex_ctx, s->nbits * 2);
+ s->pktout = ssh2_pkt_init(s->kex_init_value);
+ ssh2_pkt_addmp(s->pktout, s->e);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+
+ set_busy_status(ssh->frontend, BUSY_WAITING); /* wait for server */
+ crWaitUntil(pktin);
+ if (pktin->type != s->kex_reply_value) {
+ bombout(("expected key exchange reply packet from server"));
+ crStop(0);
+ }
+ set_busy_status(ssh->frontend, BUSY_CPU); /* cogitate */
+ ssh_pkt_getstring(pktin, &s->hostkeydata, &s->hostkeylen);
+ s->f = ssh2_pkt_getmp(pktin);
+ if (!s->f) {
+ bombout(("unable to parse key exchange reply packet"));
+ crStop(0);
+ }
+ ssh_pkt_getstring(pktin, &s->sigdata, &s->siglen);
+
+ s->K = dh_find_K(ssh->kex_ctx, s->f);
+
+ /* We assume everything from now on will be quick, and it might
+ * involve user interaction. */
+ set_busy_status(ssh->frontend, BUSY_NOT);
+
+ sha_string(&ssh->exhash, s->hostkeydata, s->hostkeylen);
+ if (ssh->kex == &ssh_diffiehellman_gex) {
+ sha_uint32(&ssh->exhash, s->pbits);
+ sha_mpint(&ssh->exhash, s->p);
+ sha_mpint(&ssh->exhash, s->g);
+ }
+ sha_mpint(&ssh->exhash, s->e);
+ sha_mpint(&ssh->exhash, s->f);
+ sha_mpint(&ssh->exhash, s->K);
+ SHA_Final(&ssh->exhash, s->exchange_hash);
+
+ dh_cleanup(ssh->kex_ctx);
+ ssh->kex_ctx = NULL;
+
+#if 0
+ debug(("Exchange hash is:\n"));
+ dmemdump(s->exchange_hash, 20);
+#endif
+
+ s->hkey = ssh->hostkey->newkey(s->hostkeydata, s->hostkeylen);
+ if (!s->hkey ||
+ !ssh->hostkey->verifysig(s->hkey, s->sigdata, s->siglen,
+ (char *)s->exchange_hash, 20)) {
+ bombout(("Server's host key did not match the signature supplied"));
+ crStop(0);
+ }
+
+ /*
+ * Authenticate remote host: verify host key. (We've already
+ * checked the signature of the exchange hash.)
+ */
+ s->keystr = ssh->hostkey->fmtkey(s->hkey);
+ s->fingerprint = ssh->hostkey->fingerprint(s->hkey);
+ ssh_set_frozen(ssh, 1);
+ s->dlgret = verify_ssh_host_key(ssh->frontend,
+ ssh->savedhost, ssh->savedport,
+ ssh->hostkey->keytype, s->keystr,
+ s->fingerprint,
+ ssh_dialog_callback, ssh);
+ if (s->dlgret < 0) {
+ do {
+ crReturn(0);
+ if (pktin) {
+ bombout(("Unexpected data from server while waiting"
+ " for user host key response"));
+ crStop(0);
+ }
+ } while (pktin || inlen > 0);
+ s->dlgret = ssh->user_response;
+ }
+ ssh_set_frozen(ssh, 0);
+ if (s->dlgret == 0) {
+ ssh->close_expected = TRUE;
+ ssh_closing((Plug)ssh, NULL, 0, 0);
+ crStop(0);
+ }
+ if (!s->got_session_id) { /* don't bother logging this in rekeys */
+ logevent("Host key fingerprint is:");
+ logevent(s->fingerprint);
+ }
+ sfree(s->fingerprint);
+ sfree(s->keystr);
+ ssh->hostkey->freekey(s->hkey);
+
+ /*
+ * The exchange hash from the very first key exchange is also
+ * the session id, used in session key construction and
+ * authentication.
+ */
+ if (!s->got_session_id) {
+ memcpy(ssh->v2_session_id, s->exchange_hash,
+ sizeof(s->exchange_hash));
+ s->got_session_id = TRUE;
+ }
+
+ /*
+ * Send SSH2_MSG_NEWKEYS.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_NEWKEYS);
+ ssh2_pkt_send_noqueue(ssh, s->pktout);
+ ssh->outgoing_data_size = 0; /* start counting from here */
+
+ /*
+ * We've sent client NEWKEYS, so create and initialise
+ * client-to-server session keys.
+ */
+ if (ssh->cs_cipher_ctx)
+ ssh->cscipher->free_context(ssh->cs_cipher_ctx);
+ ssh->cscipher = s->cscipher_tobe;
+ ssh->cs_cipher_ctx = ssh->cscipher->make_context();
+
+ if (ssh->cs_mac_ctx)
+ ssh->csmac->free_context(ssh->cs_mac_ctx);
+ ssh->csmac = s->csmac_tobe;
+ ssh->cs_mac_ctx = ssh->csmac->make_context();
+
+ if (ssh->cs_comp_ctx)
+ ssh->cscomp->compress_cleanup(ssh->cs_comp_ctx);
+ ssh->cscomp = s->cscomp_tobe;
+ ssh->cs_comp_ctx = ssh->cscomp->compress_init();
+
+ /*
+ * Set IVs on client-to-server keys. Here we use the exchange
+ * hash from the _first_ key exchange.
+ */
+ {
+ unsigned char keyspace[40];
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'C',keyspace);
+ ssh->cscipher->setkey(ssh->cs_cipher_ctx, keyspace);
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'A',keyspace);
+ ssh->cscipher->setiv(ssh->cs_cipher_ctx, keyspace);
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'E',keyspace);
+ ssh->csmac->setkey(ssh->cs_mac_ctx, keyspace);
+ }
+
+ logeventf(ssh, "Initialised %.200s client->server encryption",
+ ssh->cscipher->text_name);
+ logeventf(ssh, "Initialised %.200s client->server MAC algorithm",
+ ssh->csmac->text_name);
+ if (ssh->cscomp->text_name)
+ logeventf(ssh, "Initialised %s compression",
+ ssh->cscomp->text_name);
+
+ /*
+ * Now our end of the key exchange is complete, we can send all
+ * our queued higher-layer packets.
+ */
+ ssh->queueing = FALSE;
+ ssh2_pkt_queuesend(ssh);
+
+ /*
+ * Expect SSH2_MSG_NEWKEYS from server.
+ */
+ crWaitUntil(pktin);
+ if (pktin->type != SSH2_MSG_NEWKEYS) {
+ bombout(("expected new-keys packet from server"));
+ crStop(0);
+ }
+ ssh->incoming_data_size = 0; /* start counting from here */
+
+ /*
+ * We've seen server NEWKEYS, so create and initialise
+ * server-to-client session keys.
+ */
+ if (ssh->sc_cipher_ctx)
+ ssh->sccipher->free_context(ssh->sc_cipher_ctx);
+ ssh->sccipher = s->sccipher_tobe;
+ ssh->sc_cipher_ctx = ssh->sccipher->make_context();
+
+ if (ssh->sc_mac_ctx)
+ ssh->scmac->free_context(ssh->sc_mac_ctx);
+ ssh->scmac = s->scmac_tobe;
+ ssh->sc_mac_ctx = ssh->scmac->make_context();
+
+ if (ssh->sc_comp_ctx)
+ ssh->sccomp->decompress_cleanup(ssh->sc_comp_ctx);
+ ssh->sccomp = s->sccomp_tobe;
+ ssh->sc_comp_ctx = ssh->sccomp->decompress_init();
+
+ /*
+ * Set IVs on server-to-client keys. Here we use the exchange
+ * hash from the _first_ key exchange.
+ */
+ {
+ unsigned char keyspace[40];
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'D',keyspace);
+ ssh->sccipher->setkey(ssh->sc_cipher_ctx, keyspace);
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'B',keyspace);
+ ssh->sccipher->setiv(ssh->sc_cipher_ctx, keyspace);
+ ssh2_mkkey(ssh,s->K,s->exchange_hash,ssh->v2_session_id,'F',keyspace);
+ ssh->scmac->setkey(ssh->sc_mac_ctx, keyspace);
+ }
+ logeventf(ssh, "Initialised %.200s server->client encryption",
+ ssh->sccipher->text_name);
+ logeventf(ssh, "Initialised %.200s server->client MAC algorithm",
+ ssh->scmac->text_name);
+ if (ssh->sccomp->text_name)
+ logeventf(ssh, "Initialised %s decompression",
+ ssh->sccomp->text_name);
+
+ /*
+ * Free key exchange data.
+ */
+ freebn(s->f);
+ freebn(s->K);
+ if (ssh->kex == &ssh_diffiehellman_gex) {
+ freebn(s->g);
+ freebn(s->p);
+ }
+
+ /*
+ * Key exchange is over. Loop straight back round if we have a
+ * deferred rekey reason.
+ */
+ if (ssh->deferred_rekey_reason) {
+ logevent(ssh->deferred_rekey_reason);
+ pktin = NULL;
+ ssh->deferred_rekey_reason = NULL;
+ goto begin_key_exchange;
+ }
+
+ /*
+ * Otherwise, schedule a timer for our next rekey.
+ */
+ ssh->kex_in_progress = FALSE;
+ ssh->last_rekey = GETTICKCOUNT();
+ if (ssh->cfg.ssh_rekey_time != 0)
+ ssh->next_rekey = schedule_timer(ssh->cfg.ssh_rekey_time*60*TICKSPERSEC,
+ ssh2_timer, ssh);
+
+ /*
+ * If this is the first key exchange phase, we must pass the
+ * SSH2_MSG_NEWKEYS packet to the next layer, not because it
+ * wants to see it but because it will need time to initialise
+ * itself before it sees an actual packet. In subsequent key
+ * exchange phases, we don't pass SSH2_MSG_NEWKEYS on, because
+ * it would only confuse the layer above.
+ */
+ if (s->activated_authconn) {
+ crReturn(1);
+ }
+ s->activated_authconn = TRUE;
+
+ /*
+ * Now we're encrypting. Begin returning 1 to the protocol main
+ * function so that other things can run on top of the
+ * transport. If we ever see a KEXINIT, we must go back to the
+ * start.
+ *
+ * We _also_ go back to the start if we see pktin==NULL and
+ * inlen==-1, because this is a special signal meaning
+ * `initiate client-driven rekey', and `in' contains a message
+ * giving the reason for the rekey.
+ */
+ while (!((pktin && pktin->type == SSH2_MSG_KEXINIT) ||
+ (!pktin && inlen == -1))) {
+ wait_for_rekey:
+ crReturn(1);
+ }
+ if (pktin) {
+ logevent("Server initiated key re-exchange");
+ } else {
+ /*
+ * Special case: if the server bug is set that doesn't
+ * allow rekeying, we give a different log message and
+ * continue waiting. (If such a server _initiates_ a rekey,
+ * we process it anyway!)
+ */
+ if ((ssh->remote_bugs & BUG_SSH2_REKEY)) {
+ logeventf(ssh, "Server bug prevents key re-exchange (%s)",
+ (char *)in);
+ /* Reset the counters, so that at least this message doesn't
+ * hit the event log _too_ often. */
+ ssh->outgoing_data_size = 0;
+ ssh->incoming_data_size = 0;
+ if (ssh->cfg.ssh_rekey_time != 0) {
+ ssh->next_rekey =
+ schedule_timer(ssh->cfg.ssh_rekey_time*60*TICKSPERSEC,
+ ssh2_timer, ssh);
+ }
+ goto wait_for_rekey; /* this is utterly horrid */
+ } else {
+ logeventf(ssh, "Initiating key re-exchange (%s)", (char *)in);
+ }
+ }
+ goto begin_key_exchange;
+
+ crFinish(1);
+}
+
+/*
+ * Add data to an SSH-2 channel output buffer.
+ */
+static void ssh2_add_channel_data(struct ssh_channel *c, char *buf,
+ int len)
+{
+ bufchain_add(&c->v.v2.outbuffer, buf, len);
+}
+
+/*
+ * Attempt to send data on an SSH-2 channel.
+ */
+static int ssh2_try_send(struct ssh_channel *c)
+{
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+
+ while (c->v.v2.remwindow > 0 && bufchain_size(&c->v.v2.outbuffer) > 0) {
+ int len;
+ void *data;
+ bufchain_prefix(&c->v.v2.outbuffer, &data, &len);
+ if ((unsigned)len > c->v.v2.remwindow)
+ len = c->v.v2.remwindow;
+ if ((unsigned)len > c->v.v2.remmaxpkt)
+ len = c->v.v2.remmaxpkt;
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_DATA);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ dont_log_data(ssh, pktout, PKTLOG_OMIT);
+ ssh2_pkt_addstring_start(pktout);
+ ssh2_pkt_addstring_data(pktout, data, len);
+ end_log_omission(ssh, pktout);
+ ssh2_pkt_send(ssh, pktout);
+ bufchain_consume(&c->v.v2.outbuffer, len);
+ c->v.v2.remwindow -= len;
+ }
+
+ /*
+ * After having sent as much data as we can, return the amount
+ * still buffered.
+ */
+ return bufchain_size(&c->v.v2.outbuffer);
+}
+
+static void ssh2_try_send_and_unthrottle(struct ssh_channel *c)
+{
+ int bufsize;
+ if (c->closes)
+ return; /* don't send on closing channels */
+ bufsize = ssh2_try_send(c);
+ if (bufsize == 0) {
+ switch (c->type) {
+ case CHAN_MAINSESSION:
+ /* stdin need not receive an unthrottle
+ * notification since it will be polled */
+ break;
+ case CHAN_X11:
+ x11_unthrottle(c->u.x11.s);
+ break;
+ case CHAN_AGENT:
+ /* agent sockets are request/response and need no
+ * buffer management */
+ break;
+ case CHAN_SOCKDATA:
+ pfd_unthrottle(c->u.pfd.s);
+ break;
+ }
+ }
+}
+
+/*
+ * Potentially enlarge the window on an SSH-2 channel.
+ */
+static void ssh2_set_window(struct ssh_channel *c, unsigned newwin)
+{
+ Ssh ssh = c->ssh;
+
+ /*
+ * Never send WINDOW_ADJUST for a channel that the remote side
+ * already thinks it's closed; there's no point, since it won't
+ * be sending any more data anyway.
+ */
+ if (c->closes != 0)
+ return;
+
+ /*
+ * Only send a WINDOW_ADJUST if there's significantly more window
+ * available than the other end thinks there is. This saves us
+ * sending a WINDOW_ADJUST for every character in a shell session.
+ *
+ * "Significant" is arbitrarily defined as half the window size.
+ */
+ if (newwin > c->v.v2.locwindow * 2) {
+ struct Packet *pktout;
+
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_WINDOW_ADJUST);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_adduint32(pktout, newwin - c->v.v2.locwindow);
+ ssh2_pkt_send(ssh, pktout);
+ c->v.v2.locwindow = newwin;
+ }
+}
+
+static void ssh2_msg_channel_window_adjust(Ssh ssh, struct Packet *pktin)
+{
+ unsigned i = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+ c = find234(ssh->channels, &i, ssh_channelfind);
+ if (c && !c->closes) {
+ c->v.v2.remwindow += ssh_pkt_getuint32(pktin);
+ ssh2_try_send_and_unthrottle(c);
+ }
+}
+
+static void ssh2_msg_channel_data(Ssh ssh, struct Packet *pktin)
+{
+ char *data;
+ int length;
+ unsigned i = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+ c = find234(ssh->channels, &i, ssh_channelfind);
+ if (!c)
+ return; /* nonexistent channel */
+ if (pktin->type == SSH2_MSG_CHANNEL_EXTENDED_DATA &&
+ ssh_pkt_getuint32(pktin) != SSH2_EXTENDED_DATA_STDERR)
+ return; /* extended but not stderr */
+ ssh_pkt_getstring(pktin, &data, &length);
+ if (data) {
+ int bufsize = 0;
+ c->v.v2.locwindow -= length;
+ switch (c->type) {
+ case CHAN_MAINSESSION:
+ bufsize =
+ from_backend(ssh->frontend, pktin->type ==
+ SSH2_MSG_CHANNEL_EXTENDED_DATA,
+ data, length);
+ break;
+ case CHAN_X11:
+ bufsize = x11_send(c->u.x11.s, data, length);
+ break;
+ case CHAN_SOCKDATA:
+ bufsize = pfd_send(c->u.pfd.s, data, length);
+ break;
+ case CHAN_AGENT:
+ while (length > 0) {
+ if (c->u.a.lensofar < 4) {
+ unsigned int l = min(4 - c->u.a.lensofar, length);
+ memcpy(c->u.a.msglen + c->u.a.lensofar,
+ data, l);
+ data += l;
+ length -= l;
+ c->u.a.lensofar += l;
+ }
+ if (c->u.a.lensofar == 4) {
+ c->u.a.totallen =
+ 4 + GET_32BIT(c->u.a.msglen);
+ c->u.a.message = snewn(c->u.a.totallen,
+ unsigned char);
+ memcpy(c->u.a.message, c->u.a.msglen, 4);
+ }
+ if (c->u.a.lensofar >= 4 && length > 0) {
+ unsigned int l =
+ min(c->u.a.totallen - c->u.a.lensofar,
+ length);
+ memcpy(c->u.a.message + c->u.a.lensofar,
+ data, l);
+ data += l;
+ length -= l;
+ c->u.a.lensofar += l;
+ }
+ if (c->u.a.lensofar == c->u.a.totallen) {
+ void *reply;
+ int replylen;
+ if (agent_query(c->u.a.message,
+ c->u.a.totallen,
+ &reply, &replylen,
+ ssh_agentf_callback, c))
+ ssh_agentf_callback(c, reply, replylen);
+ sfree(c->u.a.message);
+ c->u.a.lensofar = 0;
+ }
+ }
+ bufsize = 0;
+ break;
+ }
+ /*
+ * If we are not buffering too much data,
+ * enlarge the window again at the remote side.
+ */
+ if (bufsize < OUR_V2_WINSIZE)
+ ssh2_set_window(c, OUR_V2_WINSIZE - bufsize);
+ }
+}
+
+static void ssh2_msg_channel_eof(Ssh ssh, struct Packet *pktin)
+{
+ unsigned i = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+
+ c = find234(ssh->channels, &i, ssh_channelfind);
+ if (!c)
+ return; /* nonexistent channel */
+
+ if (c->type == CHAN_X11) {
+ /*
+ * Remote EOF on an X11 channel means we should
+ * wrap up and close the channel ourselves.
+ */
+ x11_close(c->u.x11.s);
+ sshfwd_close(c);
+ } else if (c->type == CHAN_AGENT) {
+ sshfwd_close(c);
+ } else if (c->type == CHAN_SOCKDATA) {
+ pfd_close(c->u.pfd.s);
+ sshfwd_close(c);
+ }
+}
+
+static void ssh2_msg_channel_close(Ssh ssh, struct Packet *pktin)
+{
+ unsigned i = ssh_pkt_getuint32(pktin);
+ struct ssh_channel *c;
+ struct Packet *pktout;
+
+ c = find234(ssh->channels, &i, ssh_channelfind);
+ if (!c || c->halfopen) {
+ bombout(("Received CHANNEL_CLOSE for %s channel %d\n",
+ c ? "half-open" : "nonexistent", i));
+ return;
+ }
+ /* Do pre-close processing on the channel. */
+ switch (c->type) {
+ case CHAN_MAINSESSION:
+ ssh->mainchan = NULL;
+ update_specials_menu(ssh->frontend);
+ break;
+ case CHAN_X11:
+ if (c->u.x11.s != NULL)
+ x11_close(c->u.x11.s);
+ sshfwd_close(c);
+ break;
+ case CHAN_AGENT:
+ sshfwd_close(c);
+ break;
+ case CHAN_SOCKDATA:
+ if (c->u.pfd.s != NULL)
+ pfd_close(c->u.pfd.s);
+ sshfwd_close(c);
+ break;
+ }
+ if (c->closes == 0) {
+ pktout = ssh2_pkt_init(SSH2_MSG_CHANNEL_CLOSE);
+ ssh2_pkt_adduint32(pktout, c->remoteid);
+ ssh2_pkt_send(ssh, pktout);
+ }
+ del234(ssh->channels, c);
+ bufchain_clear(&c->v.v2.outbuffer);
+ sfree(c);
+