+
+ if (pktin) {
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS) {
+ logevent("X11 forwarding enabled");
+ ssh->X11_fwd_enabled = TRUE;
+ } else
+ logevent("X11 forwarding refused");
+ }
+ }
+ crFinishFreeV(s);
+}
+
+static void ssh2_maybe_setup_agent(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
+{
+ struct ssh2_maybe_setup_agent_state {
+ int crLine;
+ };
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ crStateP(ssh2_maybe_setup_agent_state, ctx);
+
+ crBeginState;
+
+ if (ssh->mainchan && !ssh->ncmode && conf_get_int(ssh->conf, CONF_agentfwd) && agent_exists()) {
+ logevent("Requesting OpenSSH-style agent forwarding");
+ pktout = ssh2_chanreq_init(ssh->mainchan, "auth-agent-req@openssh.com",
+ ssh2_maybe_setup_agent, s);
+ ssh2_pkt_send(ssh, pktout);
+
+ crWaitUntilV(pktin);
+
+ if (pktin) {
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS) {
+ logevent("Agent forwarding enabled");
+ ssh->agentfwd_enabled = TRUE;
+ } else
+ logevent("Agent forwarding refused");
+ }
+ }
+ crFinishFreeV(s);
+}
+
+static void ssh2_maybe_setup_pty(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
+{
+ struct ssh2_maybe_setup_pty_state {
+ int crLine;
+ };
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ crStateP(ssh2_maybe_setup_pty_state, ctx);
+
+ crBeginState;
+
+ if (ssh->mainchan && !ssh->ncmode && !conf_get_int(ssh->conf, CONF_nopty)) {
+ /* Unpick the terminal-speed string. */
+ /* XXX perhaps we should allow no speeds to be sent. */
+ ssh->ospeed = 38400; ssh->ispeed = 38400; /* last-resort defaults */
+ sscanf(conf_get_str(ssh->conf, CONF_termspeed), "%d,%d", &ssh->ospeed, &ssh->ispeed);
+ /* Build the pty request. */
+ pktout = ssh2_chanreq_init(ssh->mainchan, "pty-req",
+ ssh2_maybe_setup_pty, s);
+ ssh2_pkt_addstring(pktout, conf_get_str(ssh->conf, CONF_termtype));
+ ssh2_pkt_adduint32(pktout, ssh->term_width);
+ ssh2_pkt_adduint32(pktout, ssh->term_height);
+ ssh2_pkt_adduint32(pktout, 0); /* pixel width */
+ ssh2_pkt_adduint32(pktout, 0); /* pixel height */
+ ssh2_pkt_addstring_start(pktout);
+ parse_ttymodes(ssh, ssh2_send_ttymode, (void *)pktout);
+ ssh2_pkt_addbyte(pktout, SSH2_TTY_OP_ISPEED);
+ ssh2_pkt_adduint32(pktout, ssh->ispeed);
+ ssh2_pkt_addbyte(pktout, SSH2_TTY_OP_OSPEED);
+ ssh2_pkt_adduint32(pktout, ssh->ospeed);
+ ssh2_pkt_addstring_data(pktout, "\0", 1); /* TTY_OP_END */
+ ssh2_pkt_send(ssh, pktout);
+ ssh->state = SSH_STATE_INTERMED;
+
+ crWaitUntilV(pktin);
+
+ if (pktin) {
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS) {
+ logeventf(ssh, "Allocated pty (ospeed %dbps, ispeed %dbps)",
+ ssh->ospeed, ssh->ispeed);
+ ssh->got_pty = TRUE;
+ } else {
+ c_write_str(ssh, "Server refused to allocate pty\r\n");
+ ssh->editing = ssh->echoing = 1;
+ }
+ }
+ } else {
+ ssh->editing = ssh->echoing = 1;
+ }
+ crFinishFreeV(s);
+}
+
+static void ssh2_setup_env(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
+{
+ struct ssh2_setup_env_state {
+ int crLine;
+ int num_env, env_left, env_ok;
+ };
+ Ssh ssh = c->ssh;
+ struct Packet *pktout;
+ crStateP(ssh2_setup_env_state, ctx);
+
+ crBeginState;
+
+ /*
+ * Send environment variables.
+ *
+ * Simplest thing here is to send all the requests at once, and
+ * then wait for a whole bunch of successes or failures.
+ */
+ s->num_env = 0;
+ if (ssh->mainchan && !ssh->ncmode) {
+ char *key, *val;
+
+ for (val = conf_get_str_strs(ssh->conf, CONF_environmt, NULL, &key);
+ val != NULL;
+ val = conf_get_str_strs(ssh->conf, CONF_environmt, key, &key)) {
+ pktout = ssh2_chanreq_init(ssh->mainchan, "env", ssh2_setup_env, s);
+ ssh2_pkt_addstring(pktout, key);
+ ssh2_pkt_addstring(pktout, val);
+ ssh2_pkt_send(ssh, pktout);
+
+ s->num_env++;
+ }
+ if (s->num_env)
+ logeventf(ssh, "Sent %d environment variables", s->num_env);
+ }
+
+ if (s->num_env) {
+ s->env_ok = 0;
+ s->env_left = s->num_env;
+
+ while (s->env_left > 0) {
+ crWaitUntilV(pktin);
+ if (!pktin) goto out;
+ if (pktin->type == SSH2_MSG_CHANNEL_SUCCESS)
+ s->env_ok++;
+ s->env_left--;
+ }
+
+ if (s->env_ok == s->num_env) {
+ logevent("All environment variables successfully set");
+ } else if (s->env_ok == 0) {
+ logevent("All environment variables refused");
+ c_write_str(ssh, "Server refused to set environment variables\r\n");
+ } else {
+ logeventf(ssh, "%d environment variables refused",
+ s->num_env - s->env_ok);
+ c_write_str(ssh, "Server refused to set all environment variables\r\n");
+ }
+ }
+ out:;
+ crFinishFreeV(s);
+}
+
+/*
+ * Handle the SSH-2 userauth and connection layers.
+ */
+static void ssh2_msg_authconn(Ssh ssh, struct Packet *pktin)
+{
+ do_ssh2_authconn(ssh, NULL, 0, pktin);
+}
+
+static void ssh2_response_authconn(struct ssh_channel *c, struct Packet *pktin,
+ void *ctx)
+{
+ do_ssh2_authconn(c->ssh, NULL, 0, pktin);
+}
+
+static void do_ssh2_authconn(Ssh ssh, unsigned char *in, int inlen,
+ struct Packet *pktin)
+{
+ struct do_ssh2_authconn_state {
+ int crLine;
+ enum {
+ AUTH_TYPE_NONE,
+ AUTH_TYPE_PUBLICKEY,
+ AUTH_TYPE_PUBLICKEY_OFFER_LOUD,
+ AUTH_TYPE_PUBLICKEY_OFFER_QUIET,
+ AUTH_TYPE_PASSWORD,
+ AUTH_TYPE_GSSAPI, /* always QUIET */
+ AUTH_TYPE_KEYBOARD_INTERACTIVE,
+ AUTH_TYPE_KEYBOARD_INTERACTIVE_QUIET
+ } type;
+ int done_service_req;
+ int gotit, need_pw, can_pubkey, can_passwd, can_keyb_inter;
+ int tried_pubkey_config, done_agent;
+#ifndef NO_GSSAPI
+ int can_gssapi;
+ int tried_gssapi;
+#endif
+ int kbd_inter_refused;
+ int we_are_in, userauth_success;
+ prompts_t *cur_prompt;
+ int num_prompts;
+ char *username;
+ char *password;
+ int got_username;
+ void *publickey_blob;
+ int publickey_bloblen;
+ int publickey_encrypted;
+ char *publickey_algorithm;
+ char *publickey_comment;
+ unsigned char agent_request[5], *agent_response, *agentp;
+ int agent_responselen;
+ unsigned char *pkblob_in_agent;
+ int keyi, nkeys;
+ char *pkblob, *alg, *commentp;
+ int pklen, alglen, commentlen;
+ int siglen, retlen, len;
+ char *q, *agentreq, *ret;
+ int try_send;
+ struct Packet *pktout;
+ Filename *keyfile;
+#ifndef NO_GSSAPI
+ struct ssh_gss_library *gsslib;
+ Ssh_gss_ctx gss_ctx;
+ Ssh_gss_buf gss_buf;
+ Ssh_gss_buf gss_rcvtok, gss_sndtok;
+ Ssh_gss_name gss_srv_name;
+ Ssh_gss_stat gss_stat;
+#endif
+ };
+ crState(do_ssh2_authconn_state);
+
+ crBeginState;
+
+ /* Register as a handler for all the messages this coroutine handles. */
+ ssh->packet_dispatch[SSH2_MSG_SERVICE_ACCEPT] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_REQUEST] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_FAILURE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_SUCCESS] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_BANNER] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_PK_OK] = ssh2_msg_authconn;
+ /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ] = ssh2_msg_authconn; duplicate case value */
+ /* ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_REQUEST] = ssh2_msg_authconn; duplicate case value */
+ ssh->packet_dispatch[SSH2_MSG_USERAUTH_INFO_RESPONSE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_GLOBAL_REQUEST] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_REQUEST_SUCCESS] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_REQUEST_FAILURE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_CONFIRMATION] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_OPEN_FAILURE] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_WINDOW_ADJUST] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_DATA] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EXTENDED_DATA] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_EOF] = ssh2_msg_authconn;
+ ssh->packet_dispatch[SSH2_MSG_CHANNEL_CLOSE] = ssh2_msg_authconn;
+
+ s->done_service_req = FALSE;
+ s->we_are_in = s->userauth_success = FALSE;
+#ifndef NO_GSSAPI
+ s->tried_gssapi = FALSE;
+#endif
+
+ if (!conf_get_int(ssh->conf, CONF_ssh_no_userauth)) {
+ /*
+ * Request userauth protocol, and await a response to it.
+ */
+ s->pktout = ssh2_pkt_init(SSH2_MSG_SERVICE_REQUEST);
+ ssh2_pkt_addstring(s->pktout, "ssh-userauth");
+ ssh2_pkt_send(ssh, s->pktout);
+ crWaitUntilV(pktin);
+ if (pktin->type == SSH2_MSG_SERVICE_ACCEPT)
+ s->done_service_req = TRUE;