+void random_add_heavynoise(void *noise, int length);
+
+void logevent(void *, const char *);
+
+struct PortForwarding;
+
+/* Allocate and register a new channel for port forwarding */
+void *new_sock_channel(void *handle, struct PortForwarding *pf);
+void ssh_send_port_open(void *channel, const char *hostname, int port,
+ const char *org);
+
+/* Exports from portfwd.c */
+extern char *pfd_connect(struct PortForwarding **pf, char *hostname, int port,
+ void *c, Conf *conf, int addressfamily);
+extern void pfd_close(struct PortForwarding *);
+extern int pfd_send(struct PortForwarding *, char *data, int len);
+extern void pfd_send_eof(struct PortForwarding *);
+extern void pfd_confirm(struct PortForwarding *);
+extern void pfd_unthrottle(struct PortForwarding *);
+extern void pfd_override_throttle(struct PortForwarding *, int enable);
+struct PortListener;
+/* desthost == NULL indicates dynamic (SOCKS) port forwarding */
+extern char *pfl_listen(char *desthost, int destport, char *srcaddr,
+ int port, void *backhandle, Conf *conf,
+ struct PortListener **pl, int address_family);
+extern void pfl_terminate(struct PortListener *);
+
+/* Exports from x11fwd.c */
+enum {
+ X11_TRANS_IPV4 = 0, X11_TRANS_IPV6 = 6, X11_TRANS_UNIX = 256
+};
+struct X11Display {
+ /* Broken-down components of the display name itself */
+ int unixdomain;
+ char *hostname;
+ int displaynum;
+ int screennum;
+ /* OSX sometimes replaces all the above with a full Unix-socket pathname */
+ char *unixsocketpath;
+
+ /* PuTTY networking SockAddr to connect to the display, and associated
+ * gubbins */
+ SockAddr addr;
+ int port;
+ char *realhost;
+
+ /* Our local auth details for talking to the real X display. */
+ int localauthproto;
+ unsigned char *localauthdata;
+ int localauthdatalen;
+};
+struct X11FakeAuth {
+ /* Auth details we invented for a virtual display on the SSH server. */
+ int proto;
+ unsigned char *data;
+ int datalen;
+ char *protoname;
+ char *datastring;
+
+ /* The encrypted form of the first block, in XDM-AUTHORIZATION-1.
+ * Used as part of the key when these structures are organised
+ * into a tree. See x11_invent_fake_auth for explanation. */
+ unsigned char *xa1_firstblock;
+
+ /*
+ * Used inside x11fwd.c to remember recently seen
+ * XDM-AUTHORIZATION-1 strings, to avoid replay attacks.
+ */
+ tree234 *xdmseen;
+
+ /*
+ * What to do with an X connection matching this auth data.
+ */
+ struct X11Display *disp;
+ void *share_cs, *share_chan;
+};
+void *x11_make_greeting(int endian, int protomajor, int protominor,
+ int auth_proto, const void *auth_data, int auth_len,
+ const char *peer_ip, int peer_port,
+ int *outlen);
+int x11_authcmp(void *av, void *bv); /* for putting X11FakeAuth in a tree234 */
+/*
+ * x11_setup_display() parses the display variable and fills in an
+ * X11Display structure. Some remote auth details are invented;
+ * the supplied authtype parameter configures the preferred
+ * authorisation protocol to use at the remote end. The local auth
+ * details are looked up by calling platform_get_x11_auth.
+ */
+extern struct X11Display *x11_setup_display(const char *display, Conf *);
+void x11_free_display(struct X11Display *disp);
+struct X11FakeAuth *x11_invent_fake_auth(tree234 *t, int authtype);
+void x11_free_fake_auth(struct X11FakeAuth *auth);
+struct X11Connection; /* opaque outside x11fwd.c */
+struct X11Connection *x11_init(tree234 *authtree, void *, const char *, int);
+extern void x11_close(struct X11Connection *);
+extern int x11_send(struct X11Connection *, char *, int);
+extern void x11_send_eof(struct X11Connection *s);
+extern void x11_unthrottle(struct X11Connection *s);
+extern void x11_override_throttle(struct X11Connection *s, int enable);
+char *x11_display(const char *display);
+/* Platform-dependent X11 functions */
+extern void platform_get_x11_auth(struct X11Display *display, Conf *);
+ /* examine a mostly-filled-in X11Display and fill in localauth* */
+extern const int platform_uses_x11_unix_by_default;
+ /* choose default X transport in the absence of a specified one */
+SockAddr platform_get_x11_unix_address(const char *path, int displaynum);
+ /* make up a SockAddr naming the address for displaynum */
+char *platform_get_x_display(void);
+ /* allocated local X display string, if any */
+/* Callbacks in x11.c usable _by_ platform X11 functions */
+/*
+ * This function does the job of platform_get_x11_auth, provided
+ * it is told where to find a normally formatted .Xauthority file:
+ * it opens that file, parses it to find an auth record which
+ * matches the display details in "display", and fills in the
+ * localauth fields.
+ *
+ * It is expected that most implementations of
+ * platform_get_x11_auth() will work by finding their system's
+ * .Xauthority file, adjusting the display details if necessary
+ * for local oddities like Unix-domain socket transport, and
+ * calling this function to do the rest of the work.
+ */
+void x11_get_auth_from_authfile(struct X11Display *display,
+ const char *authfilename);
+int x11_identify_auth_proto(const char *proto);
+void *x11_dehexify(const char *hex, int *outlen);
+
+Bignum copybn(Bignum b);
+Bignum bn_power_2(int n);
+void bn_restore_invariant(Bignum b);
+Bignum bignum_from_long(unsigned long n);
+void freebn(Bignum b);
+Bignum modpow(Bignum base, Bignum exp, Bignum mod);
+Bignum modmul(Bignum a, Bignum b, Bignum mod);
+Bignum modsub(const Bignum a, const Bignum b, const Bignum n);
+void decbn(Bignum n);
+extern Bignum Zero, One;
+Bignum bignum_from_bytes(const unsigned char *data, int nbytes);
+Bignum bignum_from_bytes_le(const unsigned char *data, int nbytes);
+Bignum bignum_random_in_range(const Bignum lower, const Bignum upper);
+int ssh1_read_bignum(const unsigned char *data, int len, Bignum * result);
+int bignum_bitcount(Bignum bn);
+int ssh1_bignum_length(Bignum bn);
+int ssh2_bignum_length(Bignum bn);
+int bignum_byte(Bignum bn, int i);
+int bignum_bit(Bignum bn, int i);
+void bignum_set_bit(Bignum bn, int i, int value);
+int ssh1_write_bignum(void *data, Bignum bn);
+Bignum biggcd(Bignum a, Bignum b);
+unsigned short bignum_mod_short(Bignum number, unsigned short modulus);
+Bignum bignum_add_long(Bignum number, unsigned long addend);
+Bignum bigadd(Bignum a, Bignum b);
+Bignum bigsub(Bignum a, Bignum b);
+Bignum bigmul(Bignum a, Bignum b);
+Bignum bigmuladd(Bignum a, Bignum b, Bignum addend);
+Bignum bigdiv(Bignum a, Bignum b);
+Bignum bigmod(Bignum a, Bignum b);
+Bignum modinv(Bignum number, Bignum modulus);
+Bignum bignum_bitmask(Bignum number);
+Bignum bignum_rshift(Bignum number, int shift);
+Bignum bignum_lshift(Bignum number, int shift);
+int bignum_cmp(Bignum a, Bignum b);
+char *bignum_decimal(Bignum x);
+Bignum bignum_from_decimal(const char *decimal);
+
+#ifdef DEBUG
+void diagbn(char *prefix, Bignum md);
+#endif
+
+int dh_is_gex(const struct ssh_kex *kex);
+void *dh_setup_group(const struct ssh_kex *kex);
+void *dh_setup_gex(Bignum pval, Bignum gval);
+void dh_cleanup(void *);
+Bignum dh_create_e(void *, int nbits);
+const char *dh_validate_f(void *handle, Bignum f);
+Bignum dh_find_K(void *, Bignum f);
+
+int loadrsakey(const Filename *filename, struct RSAKey *key,
+ const char *passphrase, const char **errorstr);
+int rsakey_encrypted(const Filename *filename, char **comment);
+int rsakey_pubblob(const Filename *filename, void **blob, int *bloblen,
+ char **commentptr, const char **errorstr);
+
+int saversakey(const Filename *filename, struct RSAKey *key, char *passphrase);
+
+extern int base64_decode_atom(const char *atom, unsigned char *out);
+extern int base64_lines(int datalen);
+extern void base64_encode_atom(const unsigned char *data, int n, char *out);
+extern void base64_encode(FILE *fp, const unsigned char *data, int datalen,
+ int cpl);
+
+/* ssh2_load_userkey can return this as an error */
+extern struct ssh2_userkey ssh2_wrong_passphrase;
+#define SSH2_WRONG_PASSPHRASE (&ssh2_wrong_passphrase)
+
+int ssh2_userkey_encrypted(const Filename *filename, char **comment);
+struct ssh2_userkey *ssh2_load_userkey(const Filename *filename,
+ const char *passphrase,
+ const char **errorstr);
+unsigned char *ssh2_userkey_loadpub(const Filename *filename, char **algorithm,
+ int *pub_blob_len, char **commentptr,
+ const char **errorstr);
+int ssh2_save_userkey(const Filename *filename, struct ssh2_userkey *key,
+ char *passphrase);
+const struct ssh_signkey *find_pubkey_alg(const char *name);
+const struct ssh_signkey *find_pubkey_alg_len(int namelen, const char *name);
+
+enum {
+ SSH_KEYTYPE_UNOPENABLE,
+ SSH_KEYTYPE_UNKNOWN,
+ SSH_KEYTYPE_SSH1, SSH_KEYTYPE_SSH2,
+ /*
+ * The OpenSSH key types deserve a little explanation. OpenSSH has
+ * two physical formats for private key storage: an old PEM-based
+ * one largely dictated by their use of OpenSSL and full of ASN.1,
+ * and a new one using the same private key formats used over the
+ * wire for talking to ssh-agent. The old format can only support
+ * a subset of the key types, because it needs redesign for each
+ * key type, and after a while they decided to move to the new
+ * format so as not to have to do that.
+ *
+ * On input, key files are identified as either
+ * SSH_KEYTYPE_OPENSSH_PEM or SSH_KEYTYPE_OPENSSH_NEW, describing
+ * accurately which actual format the keys are stored in.
+ *
+ * On output, however, we default to following OpenSSH's own
+ * policy of writing out PEM-style keys for maximum backwards
+ * compatibility if the key type supports it, and otherwise
+ * switching to the new format. So the formats you can select for
+ * output are SSH_KEYTYPE_OPENSSH_NEW (forcing the new format for
+ * any key type), and SSH_KEYTYPE_OPENSSH_AUTO to use the oldest
+ * format supported by whatever key type you're writing out.
+ *
+ * So we have three type codes, but only two of them usable in any
+ * given circumstance. An input key file will never be identified
+ * as AUTO, only PEM or NEW; key export UIs should not be able to
+ * select PEM, only AUTO or NEW.
+ */
+ SSH_KEYTYPE_OPENSSH_AUTO,
+ SSH_KEYTYPE_OPENSSH_PEM,
+ SSH_KEYTYPE_OPENSSH_NEW,
+ SSH_KEYTYPE_SSHCOM,
+ /*
+ * Public-key-only formats, which we still want to be able to read
+ * for various purposes.
+ */
+ SSH_KEYTYPE_SSH1_PUBLIC,
+ SSH_KEYTYPE_SSH2_PUBLIC_RFC4716,
+ SSH_KEYTYPE_SSH2_PUBLIC_OPENSSH
+};
+char *ssh1_pubkey_str(struct RSAKey *ssh1key);
+void ssh1_write_pubkey(FILE *fp, struct RSAKey *ssh1key);
+char *ssh2_pubkey_openssh_str(struct ssh2_userkey *key);
+void ssh2_write_pubkey(FILE *fp, const char *comment,
+ const void *v_pub_blob, int pub_len,
+ int keytype);
+char *ssh2_fingerprint_blob(const void *blob, int bloblen);
+char *ssh2_fingerprint(const struct ssh_signkey *alg, void *data);
+int key_type(const Filename *filename);
+const char *key_type_to_str(int type);
+
+int import_possible(int type);
+int import_target_type(int type);
+int import_encrypted(const Filename *filename, int type, char **comment);
+int import_ssh1(const Filename *filename, int type,
+ struct RSAKey *key, char *passphrase, const char **errmsg_p);
+struct ssh2_userkey *import_ssh2(const Filename *filename, int type,
+ char *passphrase, const char **errmsg_p);
+int export_ssh1(const Filename *filename, int type,
+ struct RSAKey *key, char *passphrase);
+int export_ssh2(const Filename *filename, int type,
+ struct ssh2_userkey *key, char *passphrase);
+
+void des3_decrypt_pubkey(unsigned char *key, unsigned char *blk, int len);
+void des3_encrypt_pubkey(unsigned char *key, unsigned char *blk, int len);
+void des3_decrypt_pubkey_ossh(unsigned char *key, unsigned char *iv,
+ unsigned char *blk, int len);
+void des3_encrypt_pubkey_ossh(unsigned char *key, unsigned char *iv,
+ unsigned char *blk, int len);
+void aes256_encrypt_pubkey(unsigned char *key, unsigned char *blk,
+ int len);
+void aes256_decrypt_pubkey(unsigned char *key, unsigned char *blk,
+ int len);
+
+void des_encrypt_xdmauth(const unsigned char *key,
+ unsigned char *blk, int len);
+void des_decrypt_xdmauth(const unsigned char *key,
+ unsigned char *blk, int len);
+
+void openssh_bcrypt(const char *passphrase,
+ const unsigned char *salt, int saltbytes,
+ int rounds, unsigned char *out, int outbytes);
+
+/*
+ * For progress updates in the key generation utility.
+ */
+#define PROGFN_INITIALISE 1
+#define PROGFN_LIN_PHASE 2
+#define PROGFN_EXP_PHASE 3
+#define PROGFN_PHASE_EXTENT 4
+#define PROGFN_READY 5
+#define PROGFN_PROGRESS 6
+typedef void (*progfn_t) (void *param, int action, int phase, int progress);
+
+int rsa_generate(struct RSAKey *key, int bits, progfn_t pfn,
+ void *pfnparam);
+int dsa_generate(struct dss_key *key, int bits, progfn_t pfn,
+ void *pfnparam);
+int ec_generate(struct ec_key *key, int bits, progfn_t pfn,
+ void *pfnparam);
+int ec_edgenerate(struct ec_key *key, int bits, progfn_t pfn,
+ void *pfnparam);
+Bignum primegen(int bits, int modulus, int residue, Bignum factor,
+ int phase, progfn_t pfn, void *pfnparam, unsigned firstbits);
+void invent_firstbits(unsigned *one, unsigned *two);
+
+
+/*
+ * zlib compression.
+ */
+void *zlib_compress_init(void);
+void zlib_compress_cleanup(void *);
+void *zlib_decompress_init(void);
+void zlib_decompress_cleanup(void *);
+int zlib_compress_block(void *, unsigned char *block, int len,
+ unsigned char **outblock, int *outlen);
+int zlib_decompress_block(void *, unsigned char *block, int len,
+ unsigned char **outblock, int *outlen);
+
+/*
+ * Connection-sharing API provided by platforms. This function must
+ * either:
+ * - return SHARE_NONE and do nothing
+ * - return SHARE_DOWNSTREAM and set *sock to a Socket connected to
+ * downplug
+ * - return SHARE_UPSTREAM and set *sock to a Socket connected to
+ * upplug.
+ */
+enum { SHARE_NONE, SHARE_DOWNSTREAM, SHARE_UPSTREAM };
+int platform_ssh_share(const char *name, Conf *conf,
+ Plug downplug, Plug upplug, Socket *sock,
+ char **logtext, char **ds_err, char **us_err,
+ int can_upstream, int can_downstream);
+void platform_ssh_share_cleanup(const char *name);
+
+/*
+ * SSH-1 message type codes.
+ */
+#define SSH1_MSG_DISCONNECT 1 /* 0x1 */
+#define SSH1_SMSG_PUBLIC_KEY 2 /* 0x2 */
+#define SSH1_CMSG_SESSION_KEY 3 /* 0x3 */
+#define SSH1_CMSG_USER 4 /* 0x4 */
+#define SSH1_CMSG_AUTH_RSA 6 /* 0x6 */
+#define SSH1_SMSG_AUTH_RSA_CHALLENGE 7 /* 0x7 */
+#define SSH1_CMSG_AUTH_RSA_RESPONSE 8 /* 0x8 */
+#define SSH1_CMSG_AUTH_PASSWORD 9 /* 0x9 */
+#define SSH1_CMSG_REQUEST_PTY 10 /* 0xa */
+#define SSH1_CMSG_WINDOW_SIZE 11 /* 0xb */
+#define SSH1_CMSG_EXEC_SHELL 12 /* 0xc */
+#define SSH1_CMSG_EXEC_CMD 13 /* 0xd */
+#define SSH1_SMSG_SUCCESS 14 /* 0xe */
+#define SSH1_SMSG_FAILURE 15 /* 0xf */
+#define SSH1_CMSG_STDIN_DATA 16 /* 0x10 */
+#define SSH1_SMSG_STDOUT_DATA 17 /* 0x11 */
+#define SSH1_SMSG_STDERR_DATA 18 /* 0x12 */
+#define SSH1_CMSG_EOF 19 /* 0x13 */
+#define SSH1_SMSG_EXIT_STATUS 20 /* 0x14 */
+#define SSH1_MSG_CHANNEL_OPEN_CONFIRMATION 21 /* 0x15 */
+#define SSH1_MSG_CHANNEL_OPEN_FAILURE 22 /* 0x16 */
+#define SSH1_MSG_CHANNEL_DATA 23 /* 0x17 */
+#define SSH1_MSG_CHANNEL_CLOSE 24 /* 0x18 */
+#define SSH1_MSG_CHANNEL_CLOSE_CONFIRMATION 25 /* 0x19 */
+#define SSH1_SMSG_X11_OPEN 27 /* 0x1b */
+#define SSH1_CMSG_PORT_FORWARD_REQUEST 28 /* 0x1c */
+#define SSH1_MSG_PORT_OPEN 29 /* 0x1d */
+#define SSH1_CMSG_AGENT_REQUEST_FORWARDING 30 /* 0x1e */
+#define SSH1_SMSG_AGENT_OPEN 31 /* 0x1f */
+#define SSH1_MSG_IGNORE 32 /* 0x20 */
+#define SSH1_CMSG_EXIT_CONFIRMATION 33 /* 0x21 */
+#define SSH1_CMSG_X11_REQUEST_FORWARDING 34 /* 0x22 */
+#define SSH1_CMSG_AUTH_RHOSTS_RSA 35 /* 0x23 */
+#define SSH1_MSG_DEBUG 36 /* 0x24 */
+#define SSH1_CMSG_REQUEST_COMPRESSION 37 /* 0x25 */
+#define SSH1_CMSG_AUTH_TIS 39 /* 0x27 */
+#define SSH1_SMSG_AUTH_TIS_CHALLENGE 40 /* 0x28 */
+#define SSH1_CMSG_AUTH_TIS_RESPONSE 41 /* 0x29 */
+#define SSH1_CMSG_AUTH_CCARD 70 /* 0x46 */
+#define SSH1_SMSG_AUTH_CCARD_CHALLENGE 71 /* 0x47 */
+#define SSH1_CMSG_AUTH_CCARD_RESPONSE 72 /* 0x48 */
+
+#define SSH1_AUTH_RHOSTS 1 /* 0x1 */
+#define SSH1_AUTH_RSA 2 /* 0x2 */
+#define SSH1_AUTH_PASSWORD 3 /* 0x3 */
+#define SSH1_AUTH_RHOSTS_RSA 4 /* 0x4 */
+#define SSH1_AUTH_TIS 5 /* 0x5 */
+#define SSH1_AUTH_CCARD 16 /* 0x10 */
+
+#define SSH1_PROTOFLAG_SCREEN_NUMBER 1 /* 0x1 */
+/* Mask for protoflags we will echo back to server if seen */
+#define SSH1_PROTOFLAGS_SUPPORTED 0 /* 0x1 */
+
+/*
+ * SSH-2 message type codes.
+ */
+#define SSH2_MSG_DISCONNECT 1 /* 0x1 */
+#define SSH2_MSG_IGNORE 2 /* 0x2 */
+#define SSH2_MSG_UNIMPLEMENTED 3 /* 0x3 */
+#define SSH2_MSG_DEBUG 4 /* 0x4 */
+#define SSH2_MSG_SERVICE_REQUEST 5 /* 0x5 */
+#define SSH2_MSG_SERVICE_ACCEPT 6 /* 0x6 */
+#define SSH2_MSG_KEXINIT 20 /* 0x14 */
+#define SSH2_MSG_NEWKEYS 21 /* 0x15 */
+#define SSH2_MSG_KEXDH_INIT 30 /* 0x1e */
+#define SSH2_MSG_KEXDH_REPLY 31 /* 0x1f */
+#define SSH2_MSG_KEX_DH_GEX_REQUEST_OLD 30 /* 0x1e */
+#define SSH2_MSG_KEX_DH_GEX_REQUEST 34 /* 0x22 */
+#define SSH2_MSG_KEX_DH_GEX_GROUP 31 /* 0x1f */
+#define SSH2_MSG_KEX_DH_GEX_INIT 32 /* 0x20 */
+#define SSH2_MSG_KEX_DH_GEX_REPLY 33 /* 0x21 */
+#define SSH2_MSG_KEXRSA_PUBKEY 30 /* 0x1e */
+#define SSH2_MSG_KEXRSA_SECRET 31 /* 0x1f */
+#define SSH2_MSG_KEXRSA_DONE 32 /* 0x20 */
+#define SSH2_MSG_KEX_ECDH_INIT 30 /* 0x1e */
+#define SSH2_MSG_KEX_ECDH_REPLY 31 /* 0x1f */
+#define SSH2_MSG_KEX_ECMQV_INIT 30 /* 0x1e */
+#define SSH2_MSG_KEX_ECMQV_REPLY 31 /* 0x1f */
+#define SSH2_MSG_USERAUTH_REQUEST 50 /* 0x32 */
+#define SSH2_MSG_USERAUTH_FAILURE 51 /* 0x33 */
+#define SSH2_MSG_USERAUTH_SUCCESS 52 /* 0x34 */
+#define SSH2_MSG_USERAUTH_BANNER 53 /* 0x35 */
+#define SSH2_MSG_USERAUTH_PK_OK 60 /* 0x3c */
+#define SSH2_MSG_USERAUTH_PASSWD_CHANGEREQ 60 /* 0x3c */
+#define SSH2_MSG_USERAUTH_INFO_REQUEST 60 /* 0x3c */
+#define SSH2_MSG_USERAUTH_INFO_RESPONSE 61 /* 0x3d */
+#define SSH2_MSG_GLOBAL_REQUEST 80 /* 0x50 */
+#define SSH2_MSG_REQUEST_SUCCESS 81 /* 0x51 */
+#define SSH2_MSG_REQUEST_FAILURE 82 /* 0x52 */
+#define SSH2_MSG_CHANNEL_OPEN 90 /* 0x5a */
+#define SSH2_MSG_CHANNEL_OPEN_CONFIRMATION 91 /* 0x5b */
+#define SSH2_MSG_CHANNEL_OPEN_FAILURE 92 /* 0x5c */
+#define SSH2_MSG_CHANNEL_WINDOW_ADJUST 93 /* 0x5d */
+#define SSH2_MSG_CHANNEL_DATA 94 /* 0x5e */
+#define SSH2_MSG_CHANNEL_EXTENDED_DATA 95 /* 0x5f */
+#define SSH2_MSG_CHANNEL_EOF 96 /* 0x60 */
+#define SSH2_MSG_CHANNEL_CLOSE 97 /* 0x61 */
+#define SSH2_MSG_CHANNEL_REQUEST 98 /* 0x62 */
+#define SSH2_MSG_CHANNEL_SUCCESS 99 /* 0x63 */
+#define SSH2_MSG_CHANNEL_FAILURE 100 /* 0x64 */
+#define SSH2_MSG_USERAUTH_GSSAPI_RESPONSE 60
+#define SSH2_MSG_USERAUTH_GSSAPI_TOKEN 61
+#define SSH2_MSG_USERAUTH_GSSAPI_EXCHANGE_COMPLETE 63
+#define SSH2_MSG_USERAUTH_GSSAPI_ERROR 64
+#define SSH2_MSG_USERAUTH_GSSAPI_ERRTOK 65
+#define SSH2_MSG_USERAUTH_GSSAPI_MIC 66
+
+/*
+ * SSH-1 agent messages.
+ */
+#define SSH1_AGENTC_REQUEST_RSA_IDENTITIES 1
+#define SSH1_AGENT_RSA_IDENTITIES_ANSWER 2
+#define SSH1_AGENTC_RSA_CHALLENGE 3
+#define SSH1_AGENT_RSA_RESPONSE 4
+#define SSH1_AGENTC_ADD_RSA_IDENTITY 7
+#define SSH1_AGENTC_REMOVE_RSA_IDENTITY 8
+#define SSH1_AGENTC_REMOVE_ALL_RSA_IDENTITIES 9 /* openssh private? */
+
+/*
+ * Messages common to SSH-1 and OpenSSH's SSH-2.
+ */
+#define SSH_AGENT_FAILURE 5
+#define SSH_AGENT_SUCCESS 6
+
+/*
+ * OpenSSH's SSH-2 agent messages.
+ */
+#define SSH2_AGENTC_REQUEST_IDENTITIES 11
+#define SSH2_AGENT_IDENTITIES_ANSWER 12
+#define SSH2_AGENTC_SIGN_REQUEST 13
+#define SSH2_AGENT_SIGN_RESPONSE 14
+#define SSH2_AGENTC_ADD_IDENTITY 17
+#define SSH2_AGENTC_REMOVE_IDENTITY 18
+#define SSH2_AGENTC_REMOVE_ALL_IDENTITIES 19
+
+/*
+ * Assorted other SSH-related enumerations.
+ */
+#define SSH2_DISCONNECT_HOST_NOT_ALLOWED_TO_CONNECT 1 /* 0x1 */
+#define SSH2_DISCONNECT_PROTOCOL_ERROR 2 /* 0x2 */
+#define SSH2_DISCONNECT_KEY_EXCHANGE_FAILED 3 /* 0x3 */
+#define SSH2_DISCONNECT_HOST_AUTHENTICATION_FAILED 4 /* 0x4 */
+#define SSH2_DISCONNECT_MAC_ERROR 5 /* 0x5 */
+#define SSH2_DISCONNECT_COMPRESSION_ERROR 6 /* 0x6 */
+#define SSH2_DISCONNECT_SERVICE_NOT_AVAILABLE 7 /* 0x7 */
+#define SSH2_DISCONNECT_PROTOCOL_VERSION_NOT_SUPPORTED 8 /* 0x8 */
+#define SSH2_DISCONNECT_HOST_KEY_NOT_VERIFIABLE 9 /* 0x9 */
+#define SSH2_DISCONNECT_CONNECTION_LOST 10 /* 0xa */
+#define SSH2_DISCONNECT_BY_APPLICATION 11 /* 0xb */
+#define SSH2_DISCONNECT_TOO_MANY_CONNECTIONS 12 /* 0xc */
+#define SSH2_DISCONNECT_AUTH_CANCELLED_BY_USER 13 /* 0xd */
+#define SSH2_DISCONNECT_NO_MORE_AUTH_METHODS_AVAILABLE 14 /* 0xe */
+#define SSH2_DISCONNECT_ILLEGAL_USER_NAME 15 /* 0xf */
+
+#define SSH2_OPEN_ADMINISTRATIVELY_PROHIBITED 1 /* 0x1 */
+#define SSH2_OPEN_CONNECT_FAILED 2 /* 0x2 */
+#define SSH2_OPEN_UNKNOWN_CHANNEL_TYPE 3 /* 0x3 */
+#define SSH2_OPEN_RESOURCE_SHORTAGE 4 /* 0x4 */
+
+#define SSH2_EXTENDED_DATA_STDERR 1 /* 0x1 */
+
+/*
+ * Need this to warn about support for the original SSH-2 keyfile
+ * format.
+ */
+void old_keyfile_warning(void);