media: imx.rst: Provide a real example for the output format

[linux.git] / Documentation / media / v4l-drivers / imx.rst

diff --git a/Documentation/media/v4l-drivers/imx.rst b/Documentation/media/v4l-drivers/imx.rst
index 1d7eb8c7bd5c23a623f7dea94d9709d4cf85a6b5..36e8d1226ac669a14937481006aee739adc76f77 100644 (file)
--- a/Documentation/media/v4l-drivers/imx.rst
+++ b/Documentation/media/v4l-drivers/imx.rst
@@ -515,10 +515,10 @@ Streaming can then begin independently on the capture device nodes
 be used to select any supported YUV pixelformat on the capture device
 nodes, including planar.
 
-SabreAuto with ADV7180 decoder
-------------------------------
+i.MX6Q SabreAuto with ADV7180 decoder
+-------------------------------------
 
-On the SabreAuto, an on-board ADV7180 SD decoder is connected to the
+On the i.MX6Q SabreAuto, an on-board ADV7180 SD decoder is connected to the
 parallel bus input on the internal video mux to IPU1 CSI0.
 
 The following example configures a pipeline to capture from the ADV7180
@@ -547,8 +547,6 @@ This example configures a pipeline to capture from the ADV7180
 video decoder, assuming PAL 720x576 input signals, with Motion
 Compensated de-interlacing. The adv7180 must output sequential or
 alternating fields (field type 'seq-tb' for PAL, or 'alternate').
-$outputfmt can be any format supported by the ipu1_ic_prpvf entity
-at its output pad:
 
 .. code-block:: none
 
@@ -565,7 +563,7 @@ at its output pad:
    media-ctl -V "'ipu1_csi0':1 [fmt:AYUV32/720x576]"
    media-ctl -V "'ipu1_vdic':2 [fmt:AYUV32/720x576 field:none]"
    media-ctl -V "'ipu1_ic_prp':2 [fmt:AYUV32/720x576 field:none]"
-   media-ctl -V "'ipu1_ic_prpvf':1 [fmt:$outputfmt field:none]"
+   media-ctl -V "'ipu1_ic_prpvf':1 [fmt:AYUV32/720x576 field:none]"
 
 Streaming can then begin on the capture device node at
 "ipu1_ic_prpvf capture". The v4l2-ctl tool can be used to select any