Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma

[linux.git] / arch / arm / boot / dts / dm8168-evm.dts

diff --git a/arch/arm/boot/dts/dm8168-evm.dts b/arch/arm/boot/dts/dm8168-evm.dts
index 1865976db5f9a3e11aad03cdd951d2f3af83c78d..c72a2132aa823b053c5ab9450a92faf266c85878 100644 (file)
--- a/arch/arm/boot/dts/dm8168-evm.dts
+++ b/arch/arm/boot/dts/dm8168-evm.dts
@@ -68,6 +68,34 @@ usb1_pins: pinmux_usb1_pins {
                        DM816X_IOPAD(0x0d08, MUX_MODE0)                 /* USB1_DRVVBUS */
                >;
        };
+
+       nandflash_pins: nandflash_pins {
+               pinctrl-single,pins = <
+                       DM816X_IOPAD(0x0b38, PULL_UP | MUX_MODE0)               /* PINCTRL207 GPMC_CS0*/
+                       DM816X_IOPAD(0x0b60, PULL_ENA | MUX_MODE0)              /* PINCTRL217 GPMC_ADV_ALE */
+                       DM816X_IOPAD(0x0b54, PULL_UP | PULL_ENA | MUX_MODE0)    /* PINCTRL214 GPMC_OE_RE */
+                       DM816X_IOPAD(0x0b58, PULL_ENA | MUX_MODE0)              /* PINCTRL215 GPMC_BE0_CLE */
+                       DM816X_IOPAD(0x0b50, PULL_UP | MUX_MODE0)               /* PINCTRL213 GPMC_WE */
+                       DM816X_IOPAD(0x0b6c, MUX_MODE0)                         /* PINCTRL220 GPMC_WAIT */
+                       DM816X_IOPAD(0x0be4, PULL_ENA | MUX_MODE0)              /* PINCTRL250 GPMC_CLK */
+                       DM816X_IOPAD(0x0ba4, MUX_MODE0)                         /* PINCTRL234 GPMC_D0 */
+                       DM816X_IOPAD(0x0ba8, MUX_MODE0)                         /* PINCTRL234 GPMC_D1 */
+                       DM816X_IOPAD(0x0bac, MUX_MODE0)                         /* PINCTRL234 GPMC_D2 */
+                       DM816X_IOPAD(0x0bb0, MUX_MODE0)                         /* PINCTRL234 GPMC_D3 */
+                       DM816X_IOPAD(0x0bb4, MUX_MODE0)                         /* PINCTRL234 GPMC_D4 */
+                       DM816X_IOPAD(0x0bb8, MUX_MODE0)                         /* PINCTRL234 GPMC_D5 */
+                       DM816X_IOPAD(0x0bbc, MUX_MODE0)                         /* PINCTRL234 GPMC_D6 */
+                       DM816X_IOPAD(0x0bc0, MUX_MODE0)                         /* PINCTRL234 GPMC_D7 */
+                       DM816X_IOPAD(0x0bc4, MUX_MODE0)                         /* PINCTRL234 GPMC_D8 */
+                       DM816X_IOPAD(0x0bc8, MUX_MODE0)                         /* PINCTRL234 GPMC_D9 */
+                       DM816X_IOPAD(0x0bcc, MUX_MODE0)                         /* PINCTRL234 GPMC_D10 */
+                       DM816X_IOPAD(0x0bd0, MUX_MODE0)                         /* PINCTRL234 GPMC_D11 */
+                       DM816X_IOPAD(0x0bd4, MUX_MODE0)                         /* PINCTRL234 GPMC_D12 */
+                       DM816X_IOPAD(0x0bd8, MUX_MODE0)                         /* PINCTRL234 GPMC_D13 */
+                       DM816X_IOPAD(0x0bdc, MUX_MODE0)                         /* PINCTRL234 GPMC_D14 */
+                       DM816X_IOPAD(0x0be0, MUX_MODE0)                         /* PINCTRL234 GPMC_D15 */
+               >;
+       };
 };
 
 &i2c1 {
@@ -90,6 +118,8 @@ extgpio1: pcf8575@20 {
 
 &gpmc {
        ranges = <0 0 0x04000000 0x01000000>;   /* CS0: 16MB for NAND */
+       pinctrl-names = "default";
+       pinctrl-0 = <&nandflash_pins>;
 
        nand@0,0 {
                compatible = "ti,omap2-nand";
@@ -98,9 +128,11 @@ nand@0,0 {
                interrupt-parent = <&gpmc>;
                interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
                             <1 IRQ_TYPE_NONE>; /* termcount */
+               rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
                #address-cells = <1>;
                #size-cells = <1>;
                ti,nand-ecc-opt = "bch8";
+               ti,elm-id = <&elm>;
                nand-bus-width = <16>;
                gpmc,device-width = <2>;
                gpmc,sync-clk-ps = <0>;
@@ -164,7 +196,7 @@ &mmc1 {
        vmmc-supply = <&vmmcsd_fixed>;
        bus-width = <4>;
        cd-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
-       wp-gpios = <&gpio2 8 GPIO_ACTIVE_LOW>;
+       wp-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 };
 
 /* At least dm8168-evm rev c won't support multipoint, later may */