-\versionid $Id: config.but,v 1.12 2001/11/25 16:57:45 simon Exp $
-
\C{config} Configuring PuTTY
-This chapter describes all the configuration options in PuTTY.
+This chapter describes all the \i{configuration options} in PuTTY.
PuTTY is configured using the control panel that comes up before you
start a session. Some options can also be changed in the middle of a
-session, by selecting \e{Change Settings} from the window menu.
+session, by selecting \q{Change Settings} from the window menu.
\H{config-session} The Session panel
to specify in order to open a session at all, and also allows you to
save your settings to be reloaded later.
-\S{config-hostname} The host name section
+\S{config-hostname} The \i{host name} section
+
+\cfg{winhelp-topic}{session.hostname}
The top box on the Session panel, labelled \q{Specify your
connection by host name}, contains the details that need to be
filled in before PuTTY can open a session at all.
-\b The \e{Host Name} box is where you type the name, or the IP
-address, of the server you want to connect to.
+\b The \q{Host Name} box is where you type the name, or the \i{IP
+address}, of the server you want to connect to.
+
+\b The \q{Connection type} radio buttons let you choose what type of
+connection you want to make: a \I{raw TCP connections}raw
+connection, a \i{Telnet} connection, an \i{Rlogin} connection, an
+\i{SSH} connection, or a connection to a local \i{serial line}. (See
+\k{which-one} for a summary of the differences between SSH, Telnet
+and rlogin; see \k{using-rawprot} for an explanation of \q{raw}
+connections; see \k{using-serial} for information about using a
+serial line.)
+
+\b The \q{Port} box lets you specify which \i{port number} on the
+server to connect to. If you select Telnet, Rlogin, or SSH, this box
+will be filled in automatically to the usual value, and you will
+only need to change it if you have an unusual server. If you select
+Raw mode, you will almost certainly need to fill in the \q{Port} box
+yourself.
-\b The \e{Protocol} radio buttons let you choose what type of
-connection you want to make: a raw connection, a Telnet connection, an
-rlogin connection or an SSH connection. (See \k{which-one} for a
-summary of the differences between SSH, Telnet and rlogin.)
+If you select \q{Serial} from the \q{Connection type} radio buttons,
+the \q{Host Name} and \q{Port} boxes are replaced by \q{Serial line}
+and \q{Speed}; see \k{config-serial} for more details of these.
-\b The \e{Port} box lets you specify which port number on the server
-to connect to. If you select Telnet, Rlogin, or SSH, this box will be
-filled in automatically to the usual value, and you will only need to
-change it if you have an unusual server. If you select Raw mode, you
-will almost certainly need to fill in the \e{Port} box.
+\S{config-saving} \ii{Loading and storing saved sessions}
-\S{config-saving} Loading and storing saved sessions
+\cfg{winhelp-topic}{session.saved}
The next part of the Session configuration panel allows you to save
your preferred PuTTY options so they will appear automatically the
\b To save your default settings: first set up the settings the way
you want them saved. Then come back to the Session panel. Select the
-\q{Default Settings} entry in the saved sessions list, with a single
-click. Then press the \e{Save} button.
-
-Note that PuTTY does not allow you to save a host name into the
-Default Settings entry. This ensures that when PuTTY is started up,
-the host name box is always empty, so a user can always just type in
-a host name and connect.
+\q{\i{Default Settings}} entry in the saved sessions list, with a single
+click. Then press the \q{Save} button.
If there is a specific host you want to store the details of how to
connect to, you should create a saved session, which will be
\b To save a session: first go through the rest of the configuration
box setting up all the options you want. Then come back to the
-Session panel. Enter a name for the saved session in the \e{Saved
+Session panel. Enter a name for the saved session in the \q{Saved
Sessions} input box. (The server name is often a good choice for a
-saved session name.) Then press the \e{Save} button. Your saved
+saved session name.) Then press the \q{Save} button. Your saved
session name should now appear in the list box.
+\lcont{
+You can also save settings in mid-session, from the \q{Change Settings}
+dialog. Settings changed since the start of the session will be saved
+with their current values; as well as settings changed through the
+dialog, this includes changes in window size, window title changes
+sent by the server, and so on.
+}
+
\b To reload a saved session: single-click to select the session
-name in the list box, and then press the \e{Load} button. Your saved
+name in the list box, and then press the \q{Load} button. Your saved
settings should all appear in the configuration panel.
\b To modify a saved session: first load it as described above. Then
-make the changes you want. Come back to the Session panel,
-single-click to select the session name in the list box, and press
-the \e{Save} button. The new settings will be saved over the top of
+make the changes you want. Come back to the Session panel, and press
+the \q{Save} button. The new settings will be saved over the top of
the old ones.
+\lcont{
+To save the new settings under a different name, you can enter the new
+name in the \q{Saved Sessions} box, or single-click to select a
+session name in the list box to overwrite that session. To save
+\q{Default Settings}, you must single-click the name before saving.
+}
+
\b To start a saved session immediately: double-click on the session
name in the list box.
\b To delete a saved session: single-click to select the session
-name in the list box, and then press the \e{Delete} button.
+name in the list box, and then press the \q{Delete} button.
Each saved session is independent of the Default Settings
configuration. If you change your preferences and update Default
Settings, you must also update every saved session separately.
-\S{config-closeonexit} \q{Close Window on Exit}
+Saved sessions are stored in the \i{Registry}, at the location
+
+\c HKEY_CURRENT_USER\Software\SimonTatham\PuTTY\Sessions
+
+If you need to store them in a file, you could try the method
+described in \k{config-file}.
+
+\S{config-closeonexit} \q{\ii{Close Window} on Exit}
+
+\cfg{winhelp-topic}{session.coe}
Finally in the Session panel, there is an option labelled \q{Close
-Window on Exit}. This controls whether the PuTTY session window
+Window on Exit}. This controls whether the PuTTY \i{terminal window}
disappears as soon as the session inside it terminates. If you are
likely to want to copy and paste text out of the session after it
-has terminated, you should arrange this option to be off.
+has terminated, or restart the session, you should arrange for this
+option to be off.
\q{Close Window On Exit} has three settings. \q{Always} means always
close the window on exit; \q{Never} means never close on exit
-(always leave the window open). The third setting, and the default
-one, is \q{Only on clean exit}. In this mode, a session which
-terminates normally will cause its window to close, but one which is
-aborted unexpectedly by network trouble or a confusing message from
-the server will leave the window up.
+(always leave the window open, but \I{inactive window}inactive). The
+third setting, and the default one, is \q{Only on clean exit}. In this
+mode, a session which terminates normally will cause its window to
+close, but one which is aborted unexpectedly by network trouble or a
+confusing message from the server will leave the window up.
\H{config-logging} The Logging panel
-The Logging configuration panel allows you to save log files of your
+\cfg{winhelp-topic}{logging.main}
+
+The Logging configuration panel allows you to save \i{log file}s of your
PuTTY sessions, for debugging, analysis or future reference.
The main option is a radio-button set that specifies whether PuTTY
-will log anything at all. The options are
+will log anything at all. The options are:
-\b \q{Logging turned off completely}. This is the default option; in
-this mode PuTTY will not create a log file at all.
+\b \q{None}. This is the default option; in this mode PuTTY will not
+create a log file at all.
-\b \q{Log printable output only}. In this mode, a log file will be
+\b \q{Printable output}. In this mode, a log file will be
created and written to, but only printable text will be saved into
it. The various terminal control codes that are typically sent down
an interactive session alongside the printable text will be omitted.
This might be a useful mode if you want to read a log file in a text
editor and hope to be able to make sense of it.
-\b \q{Log all session output}. In this mode, \e{everything} sent by
+\b \q{All session output}. In this mode, \e{everything} sent by
the server into your terminal session is logged. If you view the log
file in a text editor, therefore, you may well find it full of
strange control characters. This is a particularly useful mode if
else can replay the session later in slow motion and watch to see
what went wrong.
+\b \I{SSH packet log}\q{SSH packets}. In this mode (which is only used
+by SSH connections), the SSH message packets sent over the encrypted
+connection are written to the log file (as well as \i{Event Log}
+entries). You might need this to debug a network-level problem, or
+more likely to send to the PuTTY authors as part of a bug report.
+\e{BE WARNED} that if you log in using a password, the password can
+appear in the log file; see \k{config-logssh} for options that may
+help to remove sensitive material from the log file before you send it
+to anyone else.
+
+\b \q{SSH packets and raw data}. In this mode, as well as the
+decrypted packets (as in the previous mode), the \e{raw} (encrypted,
+compressed, etc) packets are \e{also} logged. This could be useful to
+diagnose corruption in transit. (The same caveats as the previous mode
+apply, of course.)
+
+Note that the non-SSH logging options (\q{Printable output} and
+\q{All session output}) only work with PuTTY proper; in programs
+without terminal emulation (such as Plink), they will have no effect,
+even if enabled via saved settings.
+
\S{config-logfilename} \q{Log file name}
+\cfg{winhelp-topic}{logging.filename}
+
In this edit box you enter the name of the file you want to log the
session to. The \q{Browse} button will let you look around your file
system to find the right place to put the file; or if you already
\b \c{&H} will be replaced by the host name you are connecting to.
+\b \c{&P} will be replaced by the port number you are connecting to on
+the target host.
+
For example, if you enter the host name
\c{c:\\puttylogs\\log-&h-&y&m&d-&t.dat}, you will end up with files looking
like
\S{config-logfileexists} \q{What to do if the log file already exists}
+\cfg{winhelp-topic}{logging.exists}
+
This control allows you to specify what PuTTY should do if it tries
to start writing to a log file and it finds the file already exists.
You might want to automatically destroy the existing log file and
automatic behaviour, but to ask the user every time the problem
comes up.
+\S{config-logflush} \I{log file, flushing}\q{Flush log file frequently}
+
+\cfg{winhelp-topic}{logging.flush}
+
+This option allows you to control how frequently logged data is
+flushed to disc. By default, PuTTY will flush data as soon as it is
+displayed, so that if you view the log file while a session is still
+open, it will be up to date; and if the client system crashes, there's
+a greater chance that the data will be preserved.
+
+However, this can incur a performance penalty. If PuTTY is running
+slowly with logging enabled, you could try unchecking this option. Be
+warned that the log file may not always be up to date as a result
+(although it will of course be flushed when it is closed, for instance
+at the end of a session).
+
+\S{config-logssh} Options specific to \i{SSH packet log}ging
+
+These options only apply if SSH packet data is being logged.
+
+The following options allow particularly sensitive portions of
+unencrypted packets to be automatically left out of the log file.
+They are only intended to deter casual nosiness; an attacker could
+glean a lot of useful information from even these obfuscated logs
+(e.g., length of password).
+
+\S2{config-logssh-omitpw} \q{Omit known password fields}
+
+\cfg{winhelp-topic}{logging.ssh.omitpassword}
+
+When checked, decrypted password fields are removed from the log of
+transmitted packets. (This includes any user responses to
+challenge-response authentication methods such as
+\q{keyboard-interactive}.) This does not include X11 authentication
+data if using X11 forwarding.
+
+Note that this will only omit data that PuTTY \e{knows} to be a
+password. However, if you start another login session within your
+PuTTY session, for instance, any password used will appear in the
+clear in the packet log. The next option may be of use to protect
+against this.
+
+This option is enabled by default.
+
+\S2{config-logssh-omitdata} \q{Omit session data}
+
+\cfg{winhelp-topic}{logging.ssh.omitdata}
+
+When checked, all decrypted \q{session data} is omitted; this is
+defined as data in terminal sessions and in forwarded channels (TCP,
+X11, and authentication agent). This will usually substantially reduce
+the size of the resulting log file.
+
+This option is disabled by default.
+
\H{config-terminal} The Terminal panel
The Terminal configuration panel allows you to control the behaviour
-of PuTTY's terminal emulation.
+of PuTTY's \i{terminal emulation}.
\S{config-autowrap} \q{Auto wrap mode initially on}
-Auto wrap mode controls what happens when text printed in a PuTTY
+\cfg{winhelp-topic}{terminal.autowrap}
+
+\ii{Auto wrap mode} controls what happens when text printed in a PuTTY
window reaches the right-hand edge of the window.
With auto wrap mode on, if a long line of text reaches the
find the screen scrolling up when it looks as if it shouldn't, you
could try turning this option off.
-Auto wrap mode can be turned on and off by control sequences sent by
-the server. This configuration option only controls the \e{default}
-state. If you modify this option in mid-session using \e{Change
-Settings}, you will need to reset the terminal \#{ FIXME } before
-the change takes effect.
+Auto wrap mode can be turned on and off by \i{control sequence}s sent by
+the server. This configuration option controls the \e{default}
+state, which will be restored when you reset the terminal (see
+\k{reset-terminal}). However, if you modify this option in
+mid-session using \q{Change Settings}, it will take effect
+immediately.
\S{config-decom} \q{DEC Origin Mode initially on}
-DEC Origin Mode is a minor option which controls how PuTTY
-interprets cursor-position control sequences sent by the server.
+\cfg{winhelp-topic}{terminal.decom}
+
+\i{DEC Origin Mode} is a minor option which controls how PuTTY
+interprets cursor-position \i{control sequence}s sent by the server.
-The server can send a control sequence that restricts the scrolling
-region of the display. For example, in an editor, the server might
+The server can send a control sequence that restricts the \i{scrolling
+region} of the display. For example, in an editor, the server might
reserve a line at the top of the screen and a line at the bottom,
and might send a control sequence that causes scrolling operations
to affect only the remaining lines.
-With DEC Origin Mode on, cursor coordinates are counted from the top
+With DEC Origin Mode on, \i{cursor coordinates} are counted from the top
of the scrolling region. With it turned off, cursor coordinates are
counted from the top of the whole screen regardless of the scrolling
region.
like the wrong part of the screen, you could try turning DEC Origin
Mode on to see whether that helps.
-DEC Origin Mode can be turned on and off by control sequences sent by
-the server. This configuration option only controls the \e{default}
-state. If you modify this option in mid-session using \e{Change
-Settings}, you will need to reset the terminal \#{ FIXME } before
-the change takes effect.
+DEC Origin Mode can be turned on and off by control sequences sent
+by the server. This configuration option controls the \e{default}
+state, which will be restored when you reset the terminal (see
+\k{reset-terminal}). However, if you modify this option in
+mid-session using \q{Change Settings}, it will take effect
+immediately.
\S{config-crlf} \q{Implicit CR in every LF}
-Most servers send two control characters, CR and LF, to start a new
-line of the screen. The CR character makes the cursor return to the
+\cfg{winhelp-topic}{terminal.lfhascr}
+
+Most servers send two control characters, \i{CR} and \i{LF}, to start a
+\i{new line} of the screen. The CR character makes the cursor return to the
left-hand side of the screen. The LF character makes the cursor move
one line down (and might make the screen scroll).
Some servers only send LF, and expect the terminal to move the
cursor over to the left automatically. If you come across a server
-that does this, you will see a stepped effect on the screen, like
-this:
+that does this, you will see a \I{stair-stepping}stepped effect on the
+screen, like this:
\c First line of text
\c Second line
\c Second line
\c Third line
-\S{config-erase} \q{Use background colour to erase screen}
+\S{config-lfcr} \q{Implicit LF in every CR}
+
+\cfg{winhelp-topic}{terminal.crhaslf}
+
+Most servers send two control characters, \i{CR} and \i{LF}, to start a
+\i{new line} of the screen. The CR character makes the cursor return to the
+left-hand side of the screen. The LF character makes the cursor move
+one line down (and might make the screen scroll).
+
+Some servers only send CR, and so the newly
+written line is overwritten by the following line. This option causes
+a line feed so that all lines are displayed.
+
+\S{config-erase} \q{Use \i{background colour} to erase screen}
+
+\cfg{winhelp-topic}{terminal.bce}
Not all terminals agree on what colour to turn the screen when the
-server sends a \q{clear screen} sequence. Some terminals believe the
+server sends a \q{\i{clear screen}} sequence. Some terminals believe the
screen should always be cleared to the \e{default} background
colour. Others believe the screen should be cleared to whatever the
server has selected as a background colour.
default background colour. With this option enabled, it is done in
the \e{current} background colour.
-\S{config-blink} \q{Enable blinking text}
+Background-colour erase can be turned on and off by \i{control
+sequences} sent by the server. This configuration option controls the
+\e{default} state, which will be restored when you reset the
+terminal (see \k{reset-terminal}). However, if you modify this
+option in mid-session using \q{Change Settings}, it will take effect
+immediately.
+
+\S{config-blink} \q{Enable \i{blinking text}}
+
+\cfg{winhelp-topic}{terminal.blink}
The server can ask PuTTY to display text that blinks on and off.
This is very distracting, so PuTTY allows you to turn blinking text
off completely.
-\S{config-localecho} \q{Local echo}
+When blinking text is disabled and the server attempts to make some
+text blink, PuTTY will instead display the text with a \I{background
+colour, bright}bolded background colour.
+
+Blinking text can be turned on and off by \i{control sequence}s sent by
+the server. This configuration option controls the \e{default}
+state, which will be restored when you reset the terminal (see
+\k{reset-terminal}). However, if you modify this option in
+mid-session using \q{Change Settings}, it will take effect
+immediately.
+
+\S{config-answerback} \q{\ii{Answerback} to ^E}
+
+\cfg{winhelp-topic}{terminal.answerback}
+
+This option controls what PuTTY will send back to the server if the
+server sends it the ^E \i{enquiry character}. Normally it just sends
+the string \q{PuTTY}.
+
+If you accidentally write the contents of a binary file to your
+terminal, you will probably find that it contains more than one ^E
+character, and as a result your next command line will probably read
+\q{PuTTYPuTTYPuTTY...} as if you had typed the answerback string
+multiple times at the keyboard. If you set the answerback string to
+be empty, this problem should go away, but doing so might cause
+other problems.
+
+Note that this is \e{not} the feature of PuTTY which the server will
+typically use to determine your terminal type. That feature is the
+\q{\ii{Terminal-type} string} in the Connection panel; see
+\k{config-termtype} for details.
+
+You can include control characters in the answerback string using
+\c{^C} notation. (Use \c{^~} to get a literal \c{^}.)
+
+\S{config-localecho} \q{\ii{Local echo}}
+
+\cfg{winhelp-topic}{terminal.localecho}
With local echo disabled, characters you type into the PuTTY window
are not echoed in the window \e{by PuTTY}. They are simply sent to
-the server. (The \e{server} might choose to echo them back to you;
-this can't be controlled from the PuTTY control panel.)
+the server. (The \e{server} might choose to \I{remote echo}echo them
+back to you; this can't be controlled from the PuTTY control panel.)
Some types of session need local echo, and many do not. In its
default mode, PuTTY will automatically attempt to deduce whether or
echo to be turned on, or force it to be turned off, instead of
relying on the automatic detection.
-\S{config-localedit} \q{Local line editing}
+\S{config-localedit} \q{\ii{Local line editing}}
+
+\cfg{winhelp-topic}{terminal.localedit}
Normally, every character you type into the PuTTY window is sent
immediately to the server the moment you type it.
server will never see the mistake.
Since it is hard to edit a line locally without being able to see
-it, local line editing is mostly used in conjunction with local echo
+it, local line editing is mostly used in conjunction with \i{local echo}
(\k{config-localecho}). This makes it ideal for use in raw mode
-\#{FIXME} or when connecting to MUDs or talkers. (Although some more
+\#{FIXME} or when connecting to \i{MUD}s or \i{talker}s. (Although some more
advanced MUDs do occasionally turn local line editing on and turn
local echo off, in order to accept a password from the user.)
local line editing to be turned on, or force it to be turned off,
instead of relying on the automatic detection.
-\H{config-bell} The Bell panel
-
-The Bell panel controls the terminal bell feature: the server's
-ability to cause PuTTY to beep at you.
-
-In the default configuration, when the server sends the character
-with ASCII code 7 (Control-G), PuTTY will play the Windows Default
-Beep sound. This is not always what you want the terminal bell
-feature to do; the Bell panel allows you to configure alternative
-actions.
-
-\S{config-bellstyle} \q{Set the style of bell}
-
-This control allows you to select various different actions to occur
-on a terminal bell:
-
-\b Selecting \q{None} disables the bell completely. In this mode,
-the server can send as many Control-G characters as it likes and
-nothing at all will happen.
-
-\b \q{Play Windows Default Sound} is the default setting. It causes
-the Windows \q{Default Beep} sound to be played. To change what this
-sound is, or to test it if nothing seems to be happening, use the
-Sound configurer in the Windows Control Panel.
-
-\b \q{Play a custom sound file} allows you to specify a particular
-sound file to be used by PuTTY alone, or even by a particular
-individual PuTTY session. This allows you to distinguish your PuTTY
-beeps from any other beeps on the system. If you select this option,
-you will also need to enter the name of your sound file in the edit
-control \q{Custom sound file to play as a bell}.
-
-\b \q{Visual bell} is a silent alternative to a beeping computer. In
-this mode, when the server sends a Control-G, the whole PuTTY window
-will flash white for a fraction of a second.
-
-\S{config-belltaskbar} \q{Taskbar/caption indication on bell}
-
-This feature controls what happens to the PuTTY window's entry in
-the Windows Taskbar if a bell occurs while the window does not have
-the input focus.
-
-In the default state (\q{Disabled}) nothing unusual happens.
-
-If you select \q{Steady}, then when a bell occurs and the window is
-not in focus, the window's Taskbar entry and its title bar will
-change colour to let you know that PuTTY session is asking for your
-attention. The change of colour will persist until you select the
-window, so you can leave several PuTTY windows minimised in your
-terminal, go away from your keyboard, and be sure not to have missed
-any important beeps when you get back.
+\S{config-printing} \ii{Remote-controlled printing}
-\q{Flashing} is even more eye-catching: the Taskbar entry will
-continuously flash on and off until you select the window.
+\cfg{winhelp-topic}{terminal.printing}
-\S{config-bellovl} \q{Control the bell overload behaviour}
+A lot of VT100-compatible terminals support printing under control
+of the remote server. PuTTY supports this feature as well, but it is
+turned off by default.
-A common user error in a terminal session is to accidentally run the
-Unix command \c{cat} (or equivalent) on an inappropriate file type,
-such as an executable, image file, or ZIP file. This produces a huge
-stream of non-text characters sent to the terminal, which typically
-includes a lot of bell characters. As a result of this the terminal
-often doesn't stop beeping for ten minutes, and everybody else in
-the office gets annoyed.
+To enable remote-controlled printing, choose a printer from the
+\q{Printer to send ANSI printer output to} drop-down list box. This
+should allow you to select from all the printers you have installed
+drivers for on your computer. Alternatively, you can type the
+network name of a networked printer (for example,
+\c{\\\\printserver\\printer1}) even if you haven't already
+installed a driver for it on your own machine.
-To try to avoid this behaviour, or any other cause of excessive
-beeping, PuTTY includes a bell overload management feature. In the
-default configuration, receiving more than five bell characters in a
-two-second period will cause the overload feature to activate. Once
-the overload feature is active, further bells will have no effect at
-all, so the rest of your binary file will be sent to the screen in
-silence. After a period of five seconds during which no further
-bells are received, the overload feature will turn itself off again
-and bells will be re-enabled.
+When the remote server attempts to print some data, PuTTY will send
+that data to the printer \e{raw} - without translating it,
+attempting to format it, or doing anything else to it. It is up to
+you to ensure your remote server knows what type of printer it is
+talking to.
-If you want this feature completely disabled, you can turn it off
-using the checkbox \q{Bell is temporarily disabled when over-used}.
+Since PuTTY sends data to the printer raw, it cannot offer options
+such as portrait versus landscape, print quality, or paper tray
+selection. All these things would be done by your PC printer driver
+(which PuTTY bypasses); if you need them done, you will have to find
+a way to configure your remote server to do them.
-Alternatively, if you like the bell overload feature but don't agree
-with the settings, you can configure the details: how many bells
-constitute an overload, how short a time period they have to arrive
-in to do so, and how much silent time is required before the
-overload feature will deactivate itself.
+To disable remote printing again, choose \q{None (printing
+disabled)} from the printer selection list. This is the default
+state.
\H{config-keyboard} The Keyboard panel
The Keyboard configuration panel allows you to control the behaviour
-of the keyboard in PuTTY.
+of the \i{keyboard} in PuTTY. The correct state for many of these
+settings depends on what the server to which PuTTY is connecting
+expects. With a \i{Unix} server, this is likely to depend on the
+\i\c{termcap} or \i\c{terminfo} entry it uses, which in turn is likely to
+be controlled by the \q{\ii{Terminal-type} string} setting in the Connection
+panel; see \k{config-termtype} for details. If none of the settings here
+seems to help, you may find \k{faq-keyboard} to be useful.
-\S{config-backspace} Changing the action of the Backspace key
+\S{config-backspace} Changing the action of the \ii{Backspace key}
+
+\cfg{winhelp-topic}{keyboard.backspace}
Some terminals believe that the Backspace key should send the same
-thing to the server as Control-H (ASCII code 8). Other terminals
+thing to the server as \i{Control-H} (ASCII code 8). Other terminals
believe that the Backspace key should send ASCII code 127 (usually
-known as Control-?) so that it can be distinguished from Control-H.
+known as \i{Control-?}) so that it can be distinguished from Control-H.
This option allows you to choose which code PuTTY generates when you
press Backspace.
-If you are connecting to a Unix system, you will probably find that
-the Unix \c{stty} command lets you configure which the server
-expects to see, so you might not need to change which one PuTTY
+If you are connecting over SSH, PuTTY by default tells the server
+the value of this option (see \k{config-ttymodes}), so you may find
+that the Backspace key does the right thing either way. Similarly,
+if you are connecting to a \i{Unix} system, you will probably find that
+the Unix \i\c{stty} command lets you configure which the server
+expects to see, so again you might not need to change which one PuTTY
generates. On other systems, the server's expectation might be fixed
and you might have no choice but to configure PuTTY.
that allows applications such as \c{emacs} to use Control-H for
help.
-\S{config-homeend} Changing the action of the Home and End keys
+(Typing \i{Shift-Backspace} will cause PuTTY to send whichever code
+isn't configured here as the default.)
+
+\S{config-homeend} Changing the action of the \i{Home and End keys}
-The Unix terminal emulator \c{rxvt} disagrees with the rest of the
+\cfg{winhelp-topic}{keyboard.homeend}
+
+The Unix terminal emulator \i\c{rxvt} disagrees with the rest of the
world about what character sequences should be sent to the server by
the Home and End keys.
-\c{xterm}, and other terminals, send \c{ESC [1~} for the Home key,
+\i\c{xterm}, and other terminals, send \c{ESC [1~} for the Home key,
and \c{ESC [4~} for the End key. \c{rxvt} sends \c{ESC [H} for the
Home key and \c{ESC [Ow} for the End key.
If you find an application on which the Home and End keys aren't
working, you could try switching this option to see if it helps.
-\S{config-funkeys} Changing the action of the function keys and keypad
+\S{config-funkeys} Changing the action of the \i{function keys} and
+\i{keypad}
+
+\cfg{winhelp-topic}{keyboard.funkeys}
This option affects the function keys (F1 to F12) and the top row of
the numeric keypad.
\b In Linux mode, F6 to F12 behave just like the default mode, but
F1 to F5 generate \c{ESC [[A} through to \c{ESC [[E}. This mimics the
-Linux virtual console.
+\i{Linux virtual console}.
-\b In Xterm R6 mode, F5 to F12 behave like the default mode, but F1
+\b In \I{xterm}Xterm R6 mode, F5 to F12 behave like the default mode, but F1
to F4 generate \c{ESC OP} through to \c{ESC OS}, which are the
sequences produced by the top row of the \e{keypad} on Digital's
terminals.
-\b In VT400 mode, all the function keys behave like the default
+\b In \i{VT400} mode, all the function keys behave like the default
mode, but the actual top row of the numeric keypad generates \c{ESC
OP} through to \c{ESC OS}.
-\b In VT100+ mode, the function keys generate \c{ESC OP} through to
+\b In \i{VT100+} mode, the function keys generate \c{ESC OP} through to
\c{ESC O[}
-\b In SCO mode, the function keys F1 to F12 generate \c{ESC [M}
+\b In \i{SCO} mode, the function keys F1 to F12 generate \c{ESC [M}
through to \c{ESC [X}. Together with shift, they generate \c{ESC [Y}
through to \c{ESC [j}. With control they generate \c{ESC [k} through
to \c{ESC [v}, and with shift and control together they generate
If you don't know what any of this means, you probably don't need to
fiddle with it.
-\S{config-appcursor} Controlling Application Cursor Keys mode
+\S{config-appcursor} Controlling \i{Application Cursor Keys} mode
+
+\cfg{winhelp-topic}{keyboard.appcursor}
Application Cursor Keys mode is a way for the server to change the
control sequences sent by the arrow keys. In normal mode, the arrow
Application Cursor Keys mode can be turned on and off by the server,
depending on the application. PuTTY allows you to configure the
-initial state, and also allows you to disable application mode
-completely.
+initial state.
+
+You can also disable application cursor keys mode completely, using
+the \q{Features} configuration panel; see
+\k{config-features-application}.
-\S{config-appkeypad} Controlling Application Keypad mode
+\S{config-appkeypad} Controlling \i{Application Keypad} mode
+
+\cfg{winhelp-topic}{keyboard.appkeypad}
Application Keypad mode is a way for the server to change the
behaviour of the numeric keypad.
In normal mode, the keypad behaves like a normal Windows keypad:
-with NumLock on, the number keys generate numbers, and with NumLock
+with \i{NumLock} on, the number keys generate numbers, and with NumLock
off they act like the arrow keys and Home, End etc.
In application mode, all the keypad keys send special control
Application keypad mode can be turned on and off by the server,
depending on the application. PuTTY allows you to configure the
-initial state, and also allows you to disable application mode
-completely.
+initial state.
+
+You can also disable application keypad mode completely, using the
+\q{Features} configuration panel; see
+\k{config-features-application}.
-\S{config-nethack} Using NetHack keypad mode
+\S{config-nethack} Using \i{NetHack keypad mode}
+
+\cfg{winhelp-topic}{keyboard.nethack}
PuTTY has a special mode for playing NetHack. You can enable it by
selecting \q{NetHack} in the \q{Initial state of numeric keypad}
movement commands (\cw{hjklyubn}). The 5 key generates the \c{.}
command (do nothing).
-Better still, pressing Shift with the keypad keys generates the
-capital forms of the commands (\cw{HJKLYUBN}), which tells NetHack
-to keep moving you in the same direction until you encounter
-something interesting.
+In addition, pressing Shift or Ctrl with the keypad keys generate
+the Shift- or Ctrl-keys you would expect (e.g. keypad-7 generates
+\cq{y}, so Shift-keypad-7 generates \cq{Y} and Ctrl-keypad-7
+generates Ctrl-Y); these commands tell NetHack to keep moving you in
+the same direction until you encounter something interesting.
-For some reason, this feature only works properly when Num Lock is
+For some reason, this feature only works properly when \i{Num Lock} is
on. We don't know why.
-\S{config-compose} Enabling a DEC-like Compose key
+\S{config-compose} Enabling a DEC-like \ii{Compose key}
+
+\cfg{winhelp-topic}{keyboard.compose}
DEC terminals have a Compose key, which provides an easy-to-remember
-way of typing accented characters. You press Compose and then type
+way of typing \i{accented characters}. You press Compose and then type
two more characters. The two characters are \q{combined} to produce
an accented character. The choices of character are designed to be
easy to remember; for example, composing \q{e} and \q{`} produces
the \q{\u00e8{e-grave}} character.
-If you enable the \q{Application and AltGr act as Compose key}
-option, the Windows Application key and the AltGr key will both have
-this behaviour.
+If your keyboard has a Windows \i{Application key}, it acts as a Compose
+key in PuTTY. Alternatively, if you enable the \q{\i{AltGr} acts as
+Compose key} option, the AltGr key will become a Compose key.
-\S{config-ctrlalt} \q{Control-Alt is different from AltGr}
+\S{config-ctrlalt} \q{Control-Alt is different from \i{AltGr}}
+
+\cfg{winhelp-topic}{keyboard.ctrlalt}
Some old keyboards do not have an AltGr key, which can make it
difficult to type some characters. PuTTY can be configured to treat
so you can use it to type extra graphic characters if your keyboard
has any.
-\H{config-window} The Window panel
+(However, Ctrl-Alt will never act as a Compose key, regardless of the
+setting of \q{AltGr acts as Compose key} described in
+\k{config-compose}.)
-The Window configuration panel allows you to control aspects of the
-PuTTY window and its behaviour.
+\H{config-bell} The Bell panel
-\S{config-winsize} Setting the size of the PuTTY window
+The Bell panel controls the \i{terminal bell} feature: the server's
+ability to cause PuTTY to beep at you.
-The \e{Rows} and \e{Columns} boxes let you set the PuTTY window to a
-precise size. Of course you can also drag the window to a new size
-while a session is running.
+In the default configuration, when the server sends the character
+with ASCII code 7 (Control-G), PuTTY will play the \i{Windows Default
+Beep} sound. This is not always what you want the terminal bell
+feature to do; the Bell panel allows you to configure alternative
+actions.
-\S{config-winsizelock} Locking the size of the PuTTY window
+\S{config-bellstyle} \q{Set the style of bell}
-These options allow you to control what happens when the user tries
-to resize the PuTTY window.
+\cfg{winhelp-topic}{bell.style}
-When you resize the PuTTY window, one of three things can happen:
+This control allows you to select various different actions to occur
+on a terminal bell:
-\b Nothing (if you have completely disabled resizes).
+\b Selecting \q{None} \I{terminal bell, disabling}disables the bell
+completely. In this mode, the server can send as many Control-G
+characters as it likes and nothing at all will happen.
-\b The font size can stay the same and the number of rows and
-columns in the terminal can change.
+\b \q{Make default system alert sound} is the default setting. It
+causes the Windows \q{Default Beep} sound to be played. To change
+what this sound is, or to test it if nothing seems to be happening,
+use the Sound configurer in the Windows Control Panel.
-\b The number of rows and columns in the terminal can stay the same,
-and the font size can change.
+\b \q{\ii{Visual bell}} is a silent alternative to a beeping computer. In
+this mode, when the server sends a Control-G, the whole PuTTY window
+will flash white for a fraction of a second.
-You can control which of these happens using the \q{Lock terminal
-size against resizing} and \q{Lock font size against resizing}
-options. If you lock both, the window will refuse to be resized at
-all. If you lock just the terminal size, the font size will change
-when you resize the window. If you lock just the font size, the
-terminal size will change when you resize the window.
+\b \q{Beep using the \i{PC speaker}} is self-explanatory.
-\S{config-scrollback} Controlling scrollback
+\b \q{Play a custom \i{sound file}} allows you to specify a particular
+sound file to be used by PuTTY alone, or even by a particular
+individual PuTTY session. This allows you to distinguish your PuTTY
+beeps from any other beeps on the system. If you select this option,
+you will also need to enter the name of your sound file in the edit
+control \q{Custom sound file to play as a bell}.
-Text that scrolls off the top of the PuTTY terminal window is kept
-for reference. The scrollbar on the right of the window lets you
-view the scrolled-off text. You can also page through the scrollback
-using the keyboard, by pressing Shift-PgUp and Shift-PgDn.
+\S{config-belltaskbar} \q{\ii{Taskbar}/\I{window caption}caption
+indication on bell}
-The \q{Lines of scrollback} box lets you configure how many lines of
-text PuTTY keeps. The \q{Display scrollbar} option allows you to
-hide the scrollbar (although you can still view the scrollback using
-Shift-PgUp and Shift-PgDn).
+\cfg{winhelp-topic}{bell.taskbar}
-If you are viewing part of the scrollback when the server sends more
-text to PuTTY, the screen will revert to showing the current
-terminal contents. You can disable this behaviour by turning off
-\q{Reset scrollback on display activity}. You can also make the
-screen revert when you press a key, by turning on \q{Reset
-scrollback on keypress}.
+This feature controls what happens to the PuTTY window's entry in
+the Windows Taskbar if a bell occurs while the window does not have
+the input focus.
-\S{config-warnonclose} \q{Warn before closing window}
+In the default state (\q{Disabled}) nothing unusual happens.
-If you press the Close button in a PuTTY window that contains a
-running session, PuTTY will put up a warning window asking if you
-really meant to close the window. A window whose session has already
-terminated can always be closed without a warning.
+If you select \q{Steady}, then when a bell occurs and the window is
+not in focus, the window's Taskbar entry and its title bar will
+change colour to let you know that PuTTY session is asking for your
+attention. The change of colour will persist until you select the
+window, so you can leave several PuTTY windows minimised in your
+terminal, go away from your keyboard, and be sure not to have missed
+any important beeps when you get back.
-If you want to be able to close a window quickly, you can disable
-the \q{Warn before closing window} option.
+\q{Flashing} is even more eye-catching: the Taskbar entry will
+continuously flash on and off until you select the window.
-\S{config-altf4} \q{Window closes on ALT-F4}
+\S{config-bellovl} \q{Control the \i{bell overload} behaviour}
-By default, pressing ALT-F4 causes the window to close (or a warning
-box to appear; see \k{config-warnonclose}). If you disable the
-\q{Window closes on ALT-F4} option, then pressing ALT-F4 will simply
-send a key sequence to the server.
+\cfg{winhelp-topic}{bell.overload}
-\S{config-altspace} \q{System menu appears on ALT-Space}
+A common user error in a terminal session is to accidentally run the
+Unix command \c{cat} (or equivalent) on an inappropriate file type,
+such as an executable, image file, or ZIP file. This produces a huge
+stream of non-text characters sent to the terminal, which typically
+includes a lot of bell characters. As a result of this the terminal
+often doesn't stop beeping for ten minutes, and everybody else in
+the office gets annoyed.
-If this option is enabled, then pressing ALT-Space will bring up the
-PuTTY window's menu, like clicking on the top left corner. If it is
-disabled, then pressing ALT-Space will just send \c{ESC SPACE} to
-the server.
+To try to avoid this behaviour, or any other cause of excessive
+beeping, PuTTY includes a bell overload management feature. In the
+default configuration, receiving more than five bell characters in a
+two-second period will cause the overload feature to activate. Once
+the overload feature is active, further bells will \I{terminal bell,
+disabling} have no effect at all, so the rest of your binary file
+will be sent to the screen in silence. After a period of five seconds
+during which no further bells are received, the overload feature will
+turn itself off again and bells will be re-enabled.
-Some accessibility programs for Windows may need this option
-enabling to be able to control PuTTY's window successfully. For
-instance, Dragon NaturallySpeaking requires it both to open the
-system menu via voice, and to close, minimise, maximise and restore
-the window.
+If you want this feature completely disabled, you can turn it off
+using the checkbox \q{Bell is temporarily disabled when over-used}.
-\S{config-altonly} \q{System menu appears on Alt alone}
+Alternatively, if you like the bell overload feature but don't agree
+with the settings, you can configure the details: how many bells
+constitute an overload, how short a time period they have to arrive
+in to do so, and how much silent time is required before the
+overload feature will deactivate itself.
-If this option is enabled, then pressing and releasing ALT will
-bring up the PuTTY window's menu, like clicking on the top left
-corner. If it is disabled, then pressing and releasing ALT will have
-no effect.
+Bell overload mode is always deactivated by any keypress in the
+terminal. This means it can respond to large unexpected streams of
+data, but does not interfere with ordinary command-line activities
+that generate beeps (such as filename completion).
-\S{config-alwaysontop} \q{Ensure window is always on top}
+\H{config-features} The Features panel
-If this option is enabled, the PuTTY window will stay on top of all
-other windows.
+PuTTY's \i{terminal emulation} is very highly featured, and can do a lot
+of things under remote server control. Some of these features can
+cause problems due to buggy or strangely configured server
+applications.
-\S{config-fullscreen} \q{Full screen on Alt-Enter}
+The Features configuration panel allows you to disable some of
+PuTTY's more advanced terminal features, in case they cause trouble.
-If this option is enabled, then pressing Alt-Enter will cause the
-PuTTY window to become full-screen - that is, it will not only
-maximise itself, it will expand so that the title bar goes off the
-top of the screen, and place itself on top of the Windows taskbar,
-so that \e{nothing} is visible on the screen except PuTTY. Pressing
-Alt-Enter again will restore the previous window size.
+\S{config-features-application} Disabling application keypad and cursor keys
-\H{config-appearance} The Appearance panel
+\cfg{winhelp-topic}{features.application}
-The Appearance configuration panel allows you to control aspects of
-PuTTY's appearance.
+\I{Application Keypad}Application keypad mode (see
+\k{config-appkeypad}) and \I{Application Cursor Keys}application
+cursor keys mode (see \k{config-appcursor}) alter the behaviour of
+the keypad and cursor keys. Some applications enable these modes but
+then do not deal correctly with the modified keys. You can force
+these modes to be permanently disabled no matter what the server
+tries to do.
-\S{config-cursor} Controlling the appearance of the cursor
+\S{config-features-mouse} Disabling \cw{xterm}-style \i{mouse reporting}
-The \q{Cursor appearance} option lets you configure the cursor to be
-a block, an underline, or a vertical line. A block cursor becomes an
-empty box when the window loses focus; an underline or a vertical
-line becomes dotted.
+\cfg{winhelp-topic}{features.mouse}
-The \q{Cursor blinks} option makes the cursor blink on and off. This
-works in any of the cursor modes.
+PuTTY allows the server to send \i{control codes} that let it take over
+the mouse and use it for purposes other than \i{copy and paste}.
+Applications which use this feature include the text-mode web
+browser \i\c{links}, the Usenet newsreader \i\c{trn} version 4, and the
+file manager \i\c{mc} (Midnight Commander).
-\S{config-font} Controlling the font used in the terminal window
+If you find this feature inconvenient, you can disable it using the
+\q{Disable xterm-style mouse reporting} control. With this box
+ticked, the mouse will \e{always} do copy and paste in the normal
+way.
-This option allows you to choose what font, in what size, the PuTTY
-terminal window uses to display the text in the session. You will be
-offered a choice from all the fixed-width fonts installed on the
-system. (VT100-style terminal handling can only deal with fixed-
-width fonts.)
+Note that even if the application takes over the mouse, you can
+still manage PuTTY's copy and paste by holding down the Shift key
+while you select and paste, unless you have deliberately turned this
+feature off (see \k{config-mouseshift}).
-\S{config-title} Controlling the window title
+\S{config-features-resize} Disabling remote \i{terminal resizing}
-The \q{Window title} edit box allows you to set the title of the
-PuTTY window. By default the window title will contain the host name
-followed by \q{PuTTY}, for example \c{server1.example.com - PuTTY}.
-If you want a different window title, this is where to set it.
+\cfg{winhelp-topic}{features.resize}
-PuTTY allows the server to send \c{xterm} control sequences which
-modify the title of the window in mid-session. There is also an
-\c{xterm} sequence to modify the title of the window's \e{icon}.
-This makes sense in a windowing system where the window becomes an
-icon when minimised, such as Windows 3.1 or most X Window System
-setups; but in the Windows 95-like user interface it isn't as
-applicable. By default PuTTY's window title and Taskbar caption will
-change into the server-supplied icon title if you minimise the PuTTY
-window, and change back to the server-supplied window title if you
-restore it. (If the server has not bothered to supply a window or
-icon title, none of this will happen.) By checking the box marked
-\q{Avoid ever using icon title}, you can arrange that PuTTY will
-always display the window title, and completely ignore any icon
-titles the server sends it.
+PuTTY has the ability to change the terminal's size and position in
+response to commands from the server. If you find PuTTY is doing
+this unexpectedly or inconveniently, you can tell PuTTY not to
+respond to those server commands.
-\S{config-mouseptr} \q{Hide mouse pointer when typing in window}
+\S{config-features-altscreen} Disabling switching to the \i{alternate screen}
-If you enable this option, the mouse pointer will disappear if the
-PuTTY window is selected and you press a key. This way, it will not
-obscure any of the text in the window while you work in your
-session. As soon as you move the mouse, the pointer will reappear.
+\cfg{winhelp-topic}{features.altscreen}
-This option is disabled by default, so the mouse pointer remains
-visible at all times.
+Many terminals, including PuTTY, support an \q{alternate screen}.
+This is the same size as the ordinary terminal screen, but separate.
+Typically a screen-based program such as a text editor might switch
+the terminal to the alternate screen before starting up. Then at the
+end of the run, it switches back to the primary screen, and you see
+the screen contents just as they were before starting the editor.
-\S{config-winborder} Controlling the window border
+Some people prefer this not to happen. If you want your editor to
+run in the same screen as the rest of your terminal activity, you
+can disable the alternate screen feature completely.
-PuTTY allows you to configure the appearance of the window border to
-some extent.
+\S{config-features-retitle} Disabling remote \i{window title} changing
-The checkbox marked \q{Sunken-edge border} changes the appearance of
-the window border to something more like a DOS box: the inside edge
-of the border is highlighted as if it sank down to meet the surface
-inside the window. This makes the border a little bit thicker as
-well. It's hard to describe well. Try it and see if you like it.
+\cfg{winhelp-topic}{features.retitle}
-You can also configure a completely blank gap between the text in
-the window and the border, using the \q{Gap between text and window
-edge} control. By default this is set at one pixel. You can reduce
-it to zero, or increase it further.
+PuTTY has the ability to change the window title in response to
+commands from the server. If you find PuTTY is doing this
+unexpectedly or inconveniently, you can tell PuTTY not to respond to
+those server commands.
-\H{config-translation} The Translation panel
+\S{config-features-qtitle} Response to remote \i{window title} querying
-The Translation configuration panel allows you to control the
-translation between the character set understood by the server and
-the character set understood by PuTTY.
+\cfg{winhelp-topic}{features.qtitle}
-\S{config-charset} Controlling character set translation
+PuTTY can optionally provide the xterm service of allowing server
+applications to find out the local window title. This feature is
+disabled by default, but you can turn it on if you really want it.
-During an interactive session, PuTTY receives a stream of 8-bit
-bytes from the server, and in order to display them on the screen it
-needs to know what character set to interpret them in.
+NOTE that this feature is a \e{potential \i{security hazard}}. If a
+malicious application can write data to your terminal (for example,
+if you merely \c{cat} a file owned by someone else on the server
+machine), it can change your window title (unless you have disabled
+this as mentioned in \k{config-features-retitle}) and then use this
+service to have the new window title sent back to the server as if
+typed at the keyboard. This allows an attacker to fake keypresses
+and potentially cause your server-side applications to do things you
+didn't want. Therefore this feature is disabled by default, and we
+recommend you do not set it to \q{Window title} unless you \e{really}
+know what you are doing.
-There are a lot of character sets to choose from. The \q{Received
-data assumed to be in which character set} option lets you select
-one. By default PuTTY will attempt to choose a character set that is
-right for your locale as reported by Windows; if it gets it wrong,
-you can select a different one using this control.
+There are three settings for this option:
-A few notable character sets are:
+\dt \q{None}
-\b The ISO-8859 series are all standard character sets that include
-various accented characters appropriate for different sets of
-languages.
+\dd PuTTY makes no response whatsoever to the relevant escape
+sequence. This may upset server-side software that is expecting some
+sort of response.
-\b The Win125x series are defined by Microsoft, for similar
-purposes. In particular Win1252 is almost equivalent to ISO-8859-1,
-but contains a few extra characters such as matched quotes and the
-Euro symbol.
+\dt \q{Empty string}
-\b If you want the old IBM PC character set with block graphics and
-line-drawing characters, you can select \q{CP437}.
+\dd PuTTY makes a well-formed response, but leaves it blank. Thus,
+server-side software that expects a response is kept happy, but an
+attacker cannot influence the response string. This is probably the
+setting you want if you have no better ideas.
-\b PuTTY also supports Unicode mode, in which the data coming from
-the server is interpreted as being in the UTF-8 encoding of Unicode.
-If you select \q{UTF-8} as a character set you can use this mode.
-Not all server-side applications will support it.
+\dt \q{Window title}
-\S{config-cyr} \q{Caps Lock acts as Cyrillic switch}
+\dd PuTTY responds with the actual window title. This is dangerous for
+the reasons described above.
-This feature allows you to switch between a US/UK keyboard layout
-and a Cyrillic keyboard layout by using the Caps Lock key, if you
-need to type (for example) Russian and English side by side in the
-same document.
+\S{config-features-dbackspace} Disabling \i{destructive backspace}
-Currently this feature is not expected to work properly if your
-native keyboard layout is not US or UK.
+\cfg{winhelp-topic}{features.dbackspace}
-\S{config-linedraw} Controlling display of line drawing characters
+Normally, when PuTTY receives character 127 (^?) from the server, it
+will perform a \q{destructive backspace}: move the cursor one space
+left and delete the character under it. This can apparently cause
+problems in some applications, so PuTTY provides the ability to
+configure character 127 to perform a normal backspace (without
+deleting a character) instead.
-VT100-series terminals allow the server to send control sequences
-that shift temporarily into a separate character set for drawing
-lines and boxes. PuTTY has a variety of ways to support this
-capability. In general you should probably try lots of options until
-you find one that your particular font supports.
+\S{config-features-charset} Disabling remote \i{character set}
+configuration
-\b \q{Font has XWindows encoding} is for use with fonts that have a
-special encoding, where the lowest 32 character positions (below the
-ASCII printable range) contain the line-drawing characters. This is
-unlikely to be the case with any standard Windows font; it will
-probably only apply to custom-built fonts or fonts that have been
-automatically converted from the X Window System.
+\cfg{winhelp-topic}{features.charset}
-\b \q{Use font in both ANSI and OEM modes} tries to use the same
-font in two different character sets, to obtain a wider range of
-characters. This doesn't always work; some fonts claim to be a
-different size depending on which character set you try to use.
+PuTTY has the ability to change its character set configuration in
+response to commands from the server. Some programs send these
+commands unexpectedly or inconveniently. In particular, \i{BitchX} (an
+IRC client) seems to have a habit of reconfiguring the character set
+to something other than the user intended.
-\b \q{Use font in OEM mode only} is more reliable than that, but can
-miss out other characters from the main character set.
+If you find that accented characters are not showing up the way you
+expect them to, particularly if you're running BitchX, you could try
+disabling the remote character set configuration commands.
+
+\S{config-features-shaping} Disabling \i{Arabic text shaping}
+
+\cfg{winhelp-topic}{features.arabicshaping}
+
+PuTTY supports shaping of Arabic text, which means that if your
+server sends text written in the basic \i{Unicode} Arabic alphabet then
+it will convert it to the correct display forms before printing it
+on the screen.
+
+If you are using full-screen software which was not expecting this
+to happen (especially if you are not an Arabic speaker and you
+unexpectedly find yourself dealing with Arabic text files in
+applications which are not Arabic-aware), you might find that the
+\i{display becomes corrupted}. By ticking this box, you can disable
+Arabic text shaping so that PuTTY displays precisely the characters
+it is told to display.
+
+You may also find you need to disable bidirectional text display;
+see \k{config-features-bidi}.
+
+\S{config-features-bidi} Disabling \i{bidirectional text} display
+
+\cfg{winhelp-topic}{features.bidi}
+
+PuTTY supports bidirectional text display, which means that if your
+server sends text written in a language which is usually displayed
+from right to left (such as \i{Arabic} or \i{Hebrew}) then PuTTY will
+automatically flip it round so that it is displayed in the right
+direction on the screen.
+
+If you are using full-screen software which was not expecting this
+to happen (especially if you are not an Arabic speaker and you
+unexpectedly find yourself dealing with Arabic text files in
+applications which are not Arabic-aware), you might find that the
+\i{display becomes corrupted}. By ticking this box, you can disable
+bidirectional text display, so that PuTTY displays text from left to
+right in all situations.
+
+You may also find you need to disable Arabic text shaping;
+see \k{config-features-shaping}.
+
+\H{config-window} The Window panel
+
+The Window configuration panel allows you to control aspects of the
+\i{PuTTY window}.
+
+\S{config-winsize} Setting the \I{window size}size of the PuTTY window
+
+\cfg{winhelp-topic}{window.size}
+
+The \q{\ii{Columns}} and \q{\ii{Rows}} boxes let you set the PuTTY
+window to a precise size. Of course you can also \I{window resizing}drag
+the window to a new size while a session is running.
+
+\S{config-winsizelock} What to do when the window is resized
+
+\cfg{winhelp-topic}{window.resize}
+
+These options allow you to control what happens when the user tries
+to \I{window resizing}resize the PuTTY window using its window furniture.
+
+There are four options here:
+
+\b \q{Change the number of rows and columns}: the font size will not
+change. (This is the default.)
+
+\b \q{Change the size of the font}: the number of rows and columns in
+the terminal will stay the same, and the \i{font size} will change.
+
+\b \q{Change font size when maximised}: when the window is resized,
+the number of rows and columns will change, \e{except} when the window
+is \i{maximise}d (or restored), when the font size will change. (In
+this mode, holding down the Alt key while resizing will also cause the
+font size to change.)
+
+\b \q{Forbid resizing completely}: the terminal will refuse to be
+resized at all.
+
+\S{config-scrollback} Controlling \i{scrollback}
+
+\cfg{winhelp-topic}{window.scrollback}
+
+These options let you configure the way PuTTY keeps text after it
+scrolls off the top of the screen (see \k{using-scrollback}).
+
+The \q{Lines of scrollback} box lets you configure how many lines of
+text PuTTY keeps. The \q{Display scrollbar} options allow you to
+hide the \i{scrollbar} (although you can still view the scrollback using
+the keyboard as described in \k{using-scrollback}). You can separately
+configure whether the scrollbar is shown in \i{full-screen} mode and in
+normal modes.
+
+If you are viewing part of the scrollback when the server sends more
+text to PuTTY, the screen will revert to showing the current
+terminal contents. You can disable this behaviour by turning off
+\q{Reset scrollback on display activity}. You can also make the
+screen revert when you press a key, by turning on \q{Reset
+scrollback on keypress}.
+
+\S{config-erasetoscrollback} \q{Push erased text into scrollback}
+
+\cfg{winhelp-topic}{window.erased}
+
+When this option is enabled, the contents of the terminal screen
+will be pushed into the scrollback when a server-side application
+clears the screen, so that your scrollback will contain a better
+record of what was on your screen in the past.
+
+If the application switches to the \i{alternate screen} (see
+\k{config-features-altscreen} for more about this), then the
+contents of the primary screen will be visible in the scrollback
+until the application switches back again.
+
+This option is enabled by default.
+
+\H{config-appearance} The Appearance panel
+
+The Appearance configuration panel allows you to control aspects of
+the appearance of \I{PuTTY window}PuTTY's window.
+
+\S{config-cursor} Controlling the appearance of the \i{cursor}
+
+\cfg{winhelp-topic}{appearance.cursor}
+
+The \q{Cursor appearance} option lets you configure the cursor to be
+a block, an underline, or a vertical line. A block cursor becomes an
+empty box when the window loses focus; an underline or a vertical
+line becomes dotted.
+
+The \q{\ii{Cursor blinks}} option makes the cursor blink on and off. This
+works in any of the cursor modes.
+
+\S{config-font} Controlling the \i{font} used in the terminal window
+
+\cfg{winhelp-topic}{appearance.font}
+
+This option allows you to choose what font, in what \I{font size}size,
+the PuTTY terminal window uses to display the text in the session.
+
+By default, you will be offered a choice from all the fixed-width
+fonts installed on the system, since VT100-style terminal handling
+expects a fixed-width font. If you tick the box marked \q{Allow
+selection of variable-pitch fonts}, however, PuTTY will offer
+variable-width fonts as well: if you select one of these, the font
+will be coerced into fixed-size character cells, which will probably
+not look very good (but can work OK with some fonts).
+
+\S{config-mouseptr} \q{Hide \i{mouse pointer} when typing in window}
+
+\cfg{winhelp-topic}{appearance.hidemouse}
+
+If you enable this option, the mouse pointer will disappear if the
+PuTTY window is selected and you press a key. This way, it will not
+obscure any of the text in the window while you work in your
+session. As soon as you move the mouse, the pointer will reappear.
+
+This option is disabled by default, so the mouse pointer remains
+visible at all times.
+
+\S{config-winborder} Controlling the \i{window border}
+
+\cfg{winhelp-topic}{appearance.border}
+
+PuTTY allows you to configure the appearance of the window border to
+some extent.
+
+The checkbox marked \q{Sunken-edge border} changes the appearance of
+the window border to something more like a DOS box: the inside edge
+of the border is highlighted as if it sank down to meet the surface
+inside the window. This makes the border a little bit thicker as
+well. It's hard to describe well. Try it and see if you like it.
+
+You can also configure a completely blank gap between the text in
+the window and the border, using the \q{Gap between text and window
+edge} control. By default this is set at one pixel. You can reduce
+it to zero, or increase it further.
+
+\H{config-behaviour} The Behaviour panel
+
+The Behaviour configuration panel allows you to control aspects of
+the behaviour of \I{PuTTY window}PuTTY's window.
+
+\S{config-title} Controlling the \i{window title}
+
+\cfg{winhelp-topic}{appearance.title}
+
+The \q{Window title} edit box allows you to set the title of the
+PuTTY window. By default the window title will contain the \i{host name}
+followed by \q{PuTTY}, for example \c{server1.example.com - PuTTY}.
+If you want a different window title, this is where to set it.
+
+PuTTY allows the server to send \c{xterm} \i{control sequence}s which
+modify the title of the window in mid-session (unless this is disabled -
+see \k{config-features-retitle}); the title string set here
+is therefore only the \e{initial} window title.
+
+As well as the \e{window} title, there is also an \c{xterm}
+sequence to modify the \I{icon title}title of the window's \e{icon}.
+This makes sense in a windowing system where the window becomes an
+icon when minimised, such as Windows 3.1 or most X Window System
+setups; but in the Windows 95-like user interface it isn't as
+applicable.
+
+By default, PuTTY only uses the server-supplied \e{window} title, and
+ignores the icon title entirely. If for some reason you want to see
+both titles, check the box marked \q{Separate window and icon titles}.
+If you do this, PuTTY's window title and Taskbar \I{window caption}caption will
+change into the server-supplied icon title if you \i{minimise} the PuTTY
+window, and change back to the server-supplied window title if you
+restore it. (If the server has not bothered to supply a window or
+icon title, none of this will happen.)
+
+\S{config-warnonclose} \q{Warn before \i{closing window}}
+
+\cfg{winhelp-topic}{behaviour.closewarn}
+
+If you press the \i{Close button} in a PuTTY window that contains a
+running session, PuTTY will put up a warning window asking if you
+really meant to close the window. A window whose session has already
+terminated can always be closed without a warning.
+
+If you want to be able to close a window quickly, you can disable
+the \q{Warn before closing window} option.
+
+\S{config-altf4} \q{Window closes on \i{ALT-F4}}
+
+\cfg{winhelp-topic}{behaviour.altf4}
+
+By default, pressing ALT-F4 causes the \I{closing window}window to
+close (or a warning box to appear; see \k{config-warnonclose}). If you
+disable the \q{Window closes on ALT-F4} option, then pressing ALT-F4
+will simply send a key sequence to the server.
+
+\S{config-altspace} \q{\ii{System menu} appears on \i{ALT-Space}}
+
+\cfg{winhelp-topic}{behaviour.altspace}
+
+If this option is enabled, then pressing ALT-Space will bring up the
+PuTTY window's menu, like clicking on the top left corner. If it is
+disabled, then pressing ALT-Space will just send \c{ESC SPACE} to
+the server.
+
+Some \i{accessibility} programs for Windows may need this option
+enabling to be able to control PuTTY's window successfully. For
+instance, \i{Dragon NaturallySpeaking} requires it both to open the
+system menu via voice, and to close, minimise, maximise and restore
+the window.
+
+\S{config-altonly} \q{\ii{System menu} appears on \i{Alt} alone}
+
+\cfg{winhelp-topic}{behaviour.altonly}
+
+If this option is enabled, then pressing and releasing ALT will
+bring up the PuTTY window's menu, like clicking on the top left
+corner. If it is disabled, then pressing and releasing ALT will have
+no effect.
+
+\S{config-alwaysontop} \q{Ensure window is \i{always on top}}
+
+\cfg{winhelp-topic}{behaviour.alwaysontop}
+
+If this option is enabled, the PuTTY window will stay on top of all
+other windows.
+
+\S{config-fullscreen} \q{\ii{Full screen} on Alt-Enter}
+
+\cfg{winhelp-topic}{behaviour.altenter}
+
+If this option is enabled, then pressing Alt-Enter will cause the
+PuTTY window to become full-screen. Pressing Alt-Enter again will
+restore the previous window size.
+
+The full-screen feature is also available from the \ii{System menu}, even
+when it is configured not to be available on the Alt-Enter key. See
+\k{using-fullscreen}.
+
+\H{config-translation} The Translation panel
+
+The Translation configuration panel allows you to control the
+translation between the \i{character set} understood by the server and
+the character set understood by PuTTY.
+
+\S{config-charset} Controlling character set translation
+
+\cfg{winhelp-topic}{translation.codepage}
+
+During an interactive session, PuTTY receives a stream of 8-bit
+bytes from the server, and in order to display them on the screen it
+needs to know what character set to interpret them in. Similarly,
+PuTTY needs to know how to translate your keystrokes into the encoding
+the server expects. Unfortunately, there is no satisfactory
+mechanism for PuTTY and the server to communicate this information,
+so it must usually be manually configured.
+
+There are a lot of character sets to choose from. The \q{Remote
+character set} option lets you select one.
+
+By default PuTTY will use the \i{UTF-8} encoding of \i{Unicode}, which
+can represent pretty much any character; data coming from the server
+is interpreted as UTF-8, and keystrokes are sent UTF-8 encoded. This
+is what most modern distributions of Linux will expect by default.
+However, if this is wrong for your server, you can select a different
+character set using this control.
+
+A few other notable character sets are:
+
+\b The \i{ISO-8859} series are all standard character sets that include
+various accented characters appropriate for different sets of
+languages.
+
+\b The \i{Win125x} series are defined by Microsoft, for similar
+purposes. In particular Win1252 is almost equivalent to ISO-8859-1,
+but contains a few extra characters such as matched quotes and the
+Euro symbol.
+
+\b If you want the old IBM PC character set with block graphics and
+line-drawing characters, you can select \q{\i{CP437}}.
+
+If you need support for a numeric \i{code page} which is not listed in
+the drop-down list, such as code page 866, then you can try entering
+its name manually (\c{\i{CP866}} for example) in the list box. If the
+underlying version of Windows has the appropriate translation table
+installed, PuTTY will use it.
+
+\S{config-cjk-ambig-wide} \q{Treat \i{CJK} ambiguous characters as wide}
+
+\cfg{winhelp-topic}{translation.cjkambigwide}
+
+There are \I{East Asian Ambiguous characters}some Unicode characters
+whose \I{character width}width is not well-defined. In most contexts, such
+characters should be treated as single-width for the purposes of \I{wrapping,
+terminal}wrapping and so on; however, in some CJK contexts, they are better
+treated as double-width for historical reasons, and some server-side
+applications may expect them to be displayed as such. Setting this option
+will cause PuTTY to take the double-width interpretation.
+
+If you use legacy CJK applications, and you find your lines are
+wrapping in the wrong places, or you are having other display
+problems, you might want to play with this setting.
+
+This option only has any effect in \i{UTF-8} mode (see \k{config-charset}).
+
+\S{config-cyr} \q{\i{Caps Lock} acts as \i{Cyrillic} switch}
+
+\cfg{winhelp-topic}{translation.cyrillic}
+
+This feature allows you to switch between a US/UK keyboard layout
+and a Cyrillic keyboard layout by using the Caps Lock key, if you
+need to type (for example) \i{Russian} and English side by side in the
+same document.
+
+Currently this feature is not expected to work properly if your
+native keyboard layout is not US or UK.
+
+\S{config-linedraw} Controlling display of \i{line-drawing characters}
+
+\cfg{winhelp-topic}{translation.linedraw}
+
+VT100-series terminals allow the server to send \i{control sequence}s that
+shift temporarily into a separate character set for drawing simple
+lines and boxes. However, there are a variety of ways in which PuTTY
+can attempt to find appropriate characters, and the right one to use
+depends on the locally configured \i{font}. In general you should probably
+try lots of options until you find one that your particular font
+supports.
+
+\b \q{Use Unicode line drawing code points} tries to use the box
+characters that are present in \i{Unicode}. For good Unicode-supporting
+fonts this is probably the most reliable and functional option.
\b \q{Poor man's line drawing} assumes that the font \e{cannot}
generate the line and box characters at all, so it will use the
\c{+}, \c{-} and \c{|} characters to draw approximations to boxes.
You should use this option if none of the other options works.
-\b \q{Unicode mode} tries to use the box characters that are present
-in Unicode. For good Unicode-supporting fonts this is probably the
-most reliable and functional option.
+\b \q{Font has XWindows encoding} is for use with fonts that have a
+special encoding, where the lowest 32 character positions (below the
+ASCII printable range) contain the line-drawing characters. This is
+unlikely to be the case with any standard Windows font; it will
+probably only apply to custom-built fonts or fonts that have been
+automatically converted from the X Window System.
-\H{config-selection} The Selection panel
+\b \q{Use font in both ANSI and OEM modes} tries to use the same
+font in two different character sets, to obtain a wider range of
+characters. This doesn't always work; some fonts claim to be a
+different size depending on which character set you try to use.
-The Selection panel allows you to control the way copy and paste
-work in the PuTTY window.
+\b \q{Use font in OEM mode only} is more reliable than that, but can
+miss out other characters from the main character set.
-\S{config-linedrawpaste} Controlling the pasting of line drawing
+\S{config-linedrawpaste} Controlling \i{copy and paste} of line drawing
characters
+\cfg{winhelp-topic}{selection.linedraw}
+
By default, when you copy and paste a piece of the PuTTY screen that
-contains VT100 line and box drawing characters, PuTTY will translate
-them into the \q{poor man's} line-drawing characters \c{+}, \c{-}
-and \c{|}. The checkbox \q{Don't translate line drawing chars}
-disables this feature, so line-drawing characters will be pasted as
-if they were in the normal character set. This will typically mean
-they come out mostly as \c{q} and \c{x}, with a scattering of
-\c{jklmntuvw} at the corners. This might be useful if you were
-trying to recreate the same box layout in another program, for
-example.
+contains VT100 line and box drawing characters, PuTTY will paste
+them in the form they appear on the screen: either \i{Unicode} line
+drawing code points, or the \q{poor man's} line-drawing characters
+\c{+}, \c{-} and \c{|}. The checkbox \q{Copy and paste VT100 line
+drawing chars as lqqqk} disables this feature, so line-drawing
+characters will be pasted as the \i{ASCII} characters that were printed
+to produce them. This will typically mean they come out mostly as
+\c{q} and \c{x}, with a scattering of \c{jklmntuvw} at the corners.
+This might be useful if you were trying to recreate the same box
+layout in another program, for example.
+
+Note that this option only applies to line-drawing characters which
+\e{were} printed by using the VT100 mechanism. Line-drawing
+characters that were received as Unicode code points will paste as
+Unicode always.
+
+\H{config-selection} The Selection panel
+
+The Selection panel allows you to control the way \i{copy and paste}
+work in the PuTTY window.
+
+\S{config-rtfpaste} Pasting in \i{Rich Text Format}
+
+\cfg{winhelp-topic}{selection.rtf}
+
+If you enable \q{Paste to clipboard in RTF as well as plain text},
+PuTTY will write formatting information to the clipboard as well as
+the actual text you copy. The effect of this is
+that if you paste into (say) a word processor, the text will appear
+in the word processor in the same \i{font}, \i{colour}, and style
+(e.g. bold, underline) PuTTY was using to display it.
+
+This option can easily be inconvenient, so by default it is
+disabled.
\S{config-mouse} Changing the actions of the mouse buttons
-PuTTY's copy and paste mechanism is modelled on the Unix \c{xterm}
-application. The X Window System uses a three-button mouse, and the
-convention is that the left button selects, the right button extends
-an existing selection, and the middle button pastes.
+\cfg{winhelp-topic}{selection.buttons}
-Windows typically only has two mouse buttons, so in PuTTY's default
-configuration, the \e{right} button pastes, and the \e{middle}
-button (if you have one) extends a selection.
+PuTTY's copy and paste mechanism is by default modelled on the Unix
+\c{xterm} application. The X Window System uses a three-button mouse,
+and the convention is that the \i{left button} \I{selecting text}selects,
+the \i{right button} extends an existing selection, and the
+\i{middle button} pastes.
-If you have a three-button mouse and you are already used to the
+Windows often only has two mouse buttons, so in PuTTY's default
+configuration (\q{Compromise}), the \e{right} button pastes, and the
+\e{middle} button (if you have one) \I{adjusting a selection}extends
+a selection.
+
+If you have a \i{three-button mouse} and you are already used to the
\c{xterm} arrangement, you can select it using the \q{Action of
mouse buttons} control.
+Alternatively, with the \q{Windows} option selected, the middle
+button extends, and the right button brings up a \i{context menu} (on
+which one of the options is \q{Paste}). (This context menu is always
+available by holding down Ctrl and right-clicking, regardless of the
+setting of this option.)
+
\S{config-mouseshift} \q{Shift overrides application's use of mouse}
-PuTTY allows the server to send control codes that let it take over
-the mouse and use it for purposes other than copy and paste.
+\cfg{winhelp-topic}{selection.shiftdrag}
+
+PuTTY allows the server to send \i{control codes} that let it
+\I{mouse reporting}take over the mouse and use it for purposes other
+than \i{copy and paste}.
Applications which use this feature include the text-mode web
browser \c{links}, the Usenet newsreader \c{trn} version 4, and the
file manager \c{mc} (Midnight Commander).
checkbox will cause Shift + mouse clicks to go to the server as well
(so that mouse-driven copy and paste will be completely disabled).
-\S{config-charclasses} Configuring word-by-word selection
+If you want to prevent the application from taking over the mouse at
+all, you can do this using the Features control panel; see
+\k{config-features-mouse}.
+
+\S{config-rectselect} Default selection mode
+
+\cfg{winhelp-topic}{selection.rect}
+
+As described in \k{using-selection}, PuTTY has two modes of
+selecting text to be copied to the clipboard. In the default mode
+(\q{Normal}), dragging the mouse from point A to point B selects to
+the end of the line containing A, all the lines in between, and from
+the very beginning of the line containing B. In the other mode
+(\q{Rectangular block}), dragging the mouse between two points
+defines a rectangle, and everything within that rectangle is copied.
+
+Normally, you have to hold down Alt while dragging the mouse to
+select a rectangular block. Using the \q{Default selection mode}
+control, you can set \i{rectangular selection} as the default, and then
+you have to hold down Alt to get the \e{normal} behaviour.
+
+\S{config-charclasses} Configuring \i{word-by-word selection}
+
+\cfg{winhelp-topic}{selection.charclasses}
PuTTY will select a word at a time in the terminal window if you
-double-click to begin the drag. This panel allows you to control
+\i{double-click} to begin the drag. This panel allows you to control
precisely what is considered to be a word.
Each character is given a \e{class}, which is a small number
assignment of characters to classes, you can modify the word-by-word
selection behaviour.
-In the default configuration, the character classes are:
+In the default configuration, the \i{character classes} are:
-\b Class 0 contains white space and control characters.
+\b Class 0 contains \i{white space} and control characters.
-\b Class 1 contains most punctuation.
+\b Class 1 contains most \i{punctuation}.
\b Class 2 contains letters, numbers and a few pieces of punctuation
(the double quote, minus sign, period, forward slash and
This mechanism currently only covers ASCII characters, because it
isn't feasible to expand the list to cover the whole of Unicode.
+Character class definitions can be modified by \i{control sequence}s
+sent by the server. This configuration option controls the
+\e{default} state, which will be restored when you reset the
+terminal (see \k{reset-terminal}). However, if you modify this
+option in mid-session using \q{Change Settings}, it will take effect
+immediately.
+
\H{config-colours} The Colours panel
-The Colours panel allows you to control PuTTY's use of colour.
+The Colours panel allows you to control PuTTY's use of \i{colour}.
+
+\S{config-ansicolour} \q{Allow terminal to specify \i{ANSI colours}}
+
+\cfg{winhelp-topic}{colours.ansi}
+
+This option is enabled by default. If it is disabled, PuTTY will
+ignore any \i{control sequence}s sent by the server to request coloured
+text.
+
+If you have a particularly garish application, you might want to
+turn this option off and make PuTTY only use the default foreground
+and background colours.
+
+\S{config-xtermcolour} \q{Allow terminal to use xterm \i{256-colour mode}}
+
+\cfg{winhelp-topic}{colours.xterm256}
+
+This option is enabled by default. If it is disabled, PuTTY will
+ignore any control sequences sent by the server which use the
+extended 256-colour mode supported by recent versions of \cw{xterm}.
+
+If you have an application which is supposed to use 256-colour mode
+and it isn't working, you may find you need to tell your server that
+your terminal supports 256 colours. On Unix, you do this by ensuring
+that the setting of \i\cw{TERM} describes a 256-colour-capable
+terminal. You can check this using a command such as \c{infocmp}:
+
+\c $ infocmp | grep colors
+\c colors#256, cols#80, it#8, lines#24, pairs#256,
+\e bbbbbbbbbb
+
+If you do not see \cq{colors#256} in the output, you may need to
+change your terminal setting. On modern Linux machines, you could
+try \cq{xterm-256color}.
+
+\S{config-boldcolour} \q{Indicate bolded text by changing...}
+
+\cfg{winhelp-topic}{colours.bold}
+
+When the server sends a \i{control sequence} indicating that some text
+should be displayed in \i{bold}, PuTTY can handle this in several
+ways. It can either change the \i{font} for a bold version, or use the
+same font in a brighter colour, or it can do both (brighten the colour
+\e{and} embolden the font). This control lets you choose which.
-\S{config-boldcolour} \q{Bolded text is a different colour}
+By default bold is indicated by colour, so non-bold text is displayed
+in light grey and bold text is displayed in bright white (and
+similarly in other colours). If you change the setting to \q{The font}
+box, bold and non-bold text will be displayed in the same colour, and
+instead the font will change to indicate the difference. If you select
+\q{Both}, the font and the colour will both change.
-When the server sends a control sequence indicating that some text
-should be displayed in bold, PuTTY can handle this two ways. It can
-either change the font for a bold version, or use the same font in a
-brighter colour. This control lets you choose which.
+Some applications rely on \q{\i{bold black}} being distinguishable
+from a black background; if you choose \q{The font}, their text may
+become invisible.
-By default the box is checked, so non-bold text is displayed in
-light grey and bold text is displayed in bright white (and similarly
-in other colours). If you uncheck the box, bold and non-bold text
-will be displayed in the same colour, and instead the font will
-change to indicate the difference.
+\S{config-logpalette} \q{Attempt to use \i{logical palettes}}
-\S{config-logpalette} \q{Attempt to use logical palettes}
+\cfg{winhelp-topic}{colours.logpal}
Logical palettes are a mechanism by which a Windows application
-running on an 8-bit colour display can select precisely the colours
+running on an \i{8-bit colour} display can select precisely the colours
it wants instead of going with the Windows standard defaults.
If you are not getting the colours you ask for on an 8-bit display,
you can try enabling this option. However, be warned that it's never
worked very well.
-\S{config-colourcfg} Adjusting the colours in the terminal window
+\S{config-syscolour} \q{Use \i{system colours}}
+
+\cfg{winhelp-topic}{colours.system}
+
+Enabling this option will cause PuTTY to ignore the configured colours
+for \I{default background}\I{default foreground}\q{Default
+Background/Foreground} and \I{cursor colour}\q{Cursor Colour/Text} (see
+\k{config-colourcfg}), instead going with the system-wide defaults.
+
+Note that non-bold and \i{bold text} will be the same colour if this
+option is enabled. You might want to change to indicating bold text
+by font changes (see \k{config-boldcolour}).
+
+\S{config-colourcfg} Adjusting the colours in the \i{terminal window}
+
+\cfg{winhelp-topic}{colours.config}
The main colour control allows you to specify exactly what colours
things should be displayed in. To modify one of the PuTTY colours,
-use the list box to select which colour you want to modify. The RGB
-values for that colour will appear on the right-hand side of the
+use the list box to select which colour you want to modify. The \i{RGB
+values} for that colour will appear on the right-hand side of the
list box. Now, if you press the \q{Modify} button, you will be
presented with a colour selector, in which you can choose a new
-colour to go in place of the old one.
-
-PuTTY allows you to set the cursor colour, the default foreground
-and background, and the precise shades of all the ANSI configurable
-colours (black, red, green, yellow, blue, magenta, cyan, and white).
-In addition, if you have selected \q{Bolded text is a different
-colour}, you can also modify the precise shades used for the bold
-versions of these colours.
+colour to go in place of the old one. (You may also edit the RGB
+values directly in the edit boxes, if you wish; each value is an
+integer from 0 to 255.)
+
+PuTTY allows you to set the \i{cursor colour}, the \i{default foreground}
+and \I{default background}background, and the precise shades of all the
+\I{ANSI colours}ANSI configurable colours (black, red, green, yellow, blue,
+magenta, cyan, and white). You can also modify the precise shades used for
+the \i{bold} versions of these colours; these are used to display bold text
+if you have chosen to indicate that by colour (see \k{config-boldcolour}),
+and can also be used if the server asks specifically to use them. (Note
+that \q{Default Bold Background} is \e{not} the background colour used for
+bold text; it is only used if the server specifically asks for a bold
+background.)
\H{config-connection} The Connection panel
The Connection panel allows you to configure options that apply to
-more than one type of connection.
+more than one type of \i{connection}.
+
+\S{config-keepalive} Using \i{keepalives} to prevent disconnection
+
+\cfg{winhelp-topic}{connection.keepalive}
+
+If you find your sessions are closing unexpectedly (most often with
+\q{Connection reset by peer}) after they have been idle for a while,
+you might want to try using this option.
+
+Some network \i{routers} and \i{firewalls} need to keep track of all
+connections through them. Usually, these firewalls will assume a
+connection is dead if no data is transferred in either direction
+after a certain time interval. This can cause PuTTY sessions to be
+unexpectedly closed by the firewall if no traffic is seen in the
+session for some time.
+
+The keepalive option (\q{Seconds between keepalives}) allows you to
+configure PuTTY to send data through the session at regular
+intervals, in a way that does not disrupt the actual terminal
+session. If you find your firewall is cutting \i{idle connections} off,
+you can try entering a non-zero value in this field. The value is
+measured in seconds; so, for example, if your firewall cuts
+connections off after ten minutes then you might want to enter 300
+seconds (5 minutes) in the box.
+
+Note that keepalives are not always helpful. They help if you have a
+firewall which drops your connection after an idle period; but if
+the network between you and the server suffers from \i{breaks in
+connectivity} then keepalives can actually make things worse. If a
+session is idle, and connectivity is temporarily lost between the
+endpoints, but the connectivity is restored before either side tries
+to send anything, then there will be no problem - neither endpoint
+will notice that anything was wrong. However, if one side does send
+something during the break, it will repeatedly try to re-send, and
+eventually give up and abandon the connection. Then when
+connectivity is restored, the other side will find that the first
+side doesn't believe there is an open connection any more.
+Keepalives can make this sort of problem worse, because they
+increase the probability that PuTTY will attempt to send data during
+a break in connectivity. (Other types of periodic network activity
+can cause this behaviour; in particular, SSH-2 re-keys can have
+this effect. See \k{config-ssh-kex-rekey}.)
+
+Therefore, you might find that keepalives help
+connection loss, or you might find they make it worse, depending on
+what \e{kind} of network problems you have between you and the
+server.
+
+Keepalives are only supported in Telnet and SSH; the Rlogin and Raw
+protocols offer no way of implementing them. (For an alternative, see
+\k{config-tcp-keepalives}.)
+
+Note that if you are using \i{SSH-1} and the server has a bug that makes
+it unable to deal with SSH-1 ignore messages (see
+\k{config-ssh-bug-ignore1}), enabling keepalives will have no effect.
+
+\S{config-nodelay} \q{Disable \i{Nagle's algorithm}}
+
+\cfg{winhelp-topic}{connection.nodelay}
+
+Nagle's algorithm is a detail of TCP/IP implementations that tries
+to minimise the number of small data packets sent down a network
+connection. With Nagle's algorithm enabled, PuTTY's \i{bandwidth} usage
+will be slightly more efficient; with it disabled, you may find you
+get a faster response to your keystrokes when connecting to some
+types of server.
+
+The Nagle algorithm is disabled by default for \i{interactive connections}.
+
+\S{config-tcp-keepalives} \q{Enable \i{TCP keepalives}}
+
+\cfg{winhelp-topic}{connection.tcpkeepalive}
+
+\e{NOTE:} TCP keepalives should not be confused with the
+application-level keepalives described in \k{config-keepalive}. If in
+doubt, you probably want application-level keepalives; TCP keepalives
+are provided for completeness.
+
+The idea of TCP keepalives is similar to application-level keepalives,
+and the same caveats apply. The main differences are:
+
+\b TCP keepalives are available on \e{all} connection types, including
+Raw and Rlogin.
+
+\b The interval between TCP keepalives is usually much longer,
+typically two hours; this is set by the operating system, and cannot
+be configured within PuTTY.
-\S{config-termtype} \q{Terminal-type string}
+\b If the operating system does not receive a response to a keepalive,
+it may send out more in quick succession and terminate the connection
+if no response is received.
+
+TCP keepalives may be more useful for ensuring that \i{half-open connections}
+are terminated than for keeping a connection alive.
+
+TCP keepalives are disabled by default.
+
+\S{config-address-family} \I{Internet protocol version}\q{Internet protocol}
+
+\cfg{winhelp-topic}{connection.ipversion}
+
+This option allows the user to select between the old and new
+Internet protocols and addressing schemes (\i{IPv4} and \i{IPv6}).
+The selected protocol will be used for most outgoing network
+connections (including connections to \I{proxy}proxies); however,
+tunnels have their own configuration, for which see
+\k{config-ssh-portfwd-address-family}.
+
+The default setting is \q{Auto}, which means PuTTY will do something
+sensible and try to guess which protocol you wanted. (If you specify
+a literal \i{Internet address}, it will use whichever protocol that
+address implies. If you provide a \i{hostname}, it will see what kinds
+of address exist for that hostname; it will use IPv6 if there is an
+IPv6 address available, and fall back to IPv4 if not.)
+
+If you need to force PuTTY to use a particular protocol, you can
+explicitly set this to \q{IPv4} or \q{IPv6}.
+
+\S{config-loghost} \I{logical host name}\q{Logical name of remote host}
+
+\cfg{winhelp-topic}{connection.loghost}
+
+This allows you to tell PuTTY that the host it will really end up
+connecting to is different from where it thinks it is making a
+network connection.
+
+You might use this, for instance, if you had set up an SSH port
+forwarding in one PuTTY session so that connections to some
+arbitrary port (say, \cw{localhost} port 10022) were forwarded to a
+second machine's SSH port (say, \cw{foovax} port 22), and then
+started a second PuTTY connecting to the forwarded port.
+
+In normal usage, the second PuTTY will access the \i{host key cache}
+under the host name and port it actually connected to (i.e.
+\cw{localhost} port 10022 in this example). Using the logical host
+name option, however, you can configure the second PuTTY to cache
+the host key under the name of the host \e{you} know that it's
+\e{really} going to end up talking to (here \c{foovax}).
+
+This can be useful if you expect to connect to the same actual
+server through many different channels (perhaps because your port
+forwarding arrangements keep changing): by consistently setting the
+logical host name, you can arrange that PuTTY will not keep asking
+you to reconfirm its host key. Conversely, if you expect to use the
+same local port number for port forwardings to lots of different
+servers, you probably didn't want any particular server's host key
+cached under that local port number. (For this latter case, you
+could instead explicitly configure host keys in the relevant sessions;
+see \k{config-ssh-kex-manual-hostkeys}.)
+
+If you just enter a host name for this option, PuTTY will cache the
+SSH host key under the default SSH port for that host, irrespective
+of the port you really connected to (since the typical scenario is
+like the above example: you connect to a silly real port number and
+your connection ends up forwarded to the normal port-22 SSH server
+of some other machine). To override this, you can append a port
+number to the logical host name, separated by a colon. E.g. entering
+\cq{foovax:2200} as the logical host name will cause the host key to
+be cached as if you had connected to port 2200 of \c{foovax}.
+
+If you provide a host name using this option, it is also displayed
+in other locations which contain the remote host name, such as the
+default window title and the default SSH password prompt. This
+reflects the fact that this is the host you're \e{really} connecting
+to, which is more important than the mere means you happen to be
+using to contact that host. (This applies even if you're using a
+protocol other than SSH.)
+
+\H{config-data} The Data panel
+
+The Data panel allows you to configure various pieces of data which
+can be sent to the server to affect your connection at the far end.
+
+Each option on this panel applies to more than one protocol.
+Options which apply to only one protocol appear on that protocol's
+configuration panels.
+
+\S{config-username} \q{\ii{Auto-login username}}
+
+\cfg{winhelp-topic}{connection.username}
+
+All three of the SSH, Telnet and Rlogin protocols allow you to
+specify what user name you want to log in as, without having to type
+it explicitly every time. (Some Telnet servers don't support this.)
+
+In this box you can type that user name.
+
+\S{config-username-from-env} Use of system username
+
+\cfg{winhelp-topic}{connection.usernamefromenv}
+
+When the previous box (\k{config-username}) is left blank, by default,
+PuTTY will prompt for a username at the time you make a connection.
+
+In some environments, such as the networks of large organisations
+implementing \i{single sign-on}, a more sensible default may be to use
+the name of the user logged in to the local operating system (if any);
+this is particularly likely to be useful with \i{GSSAPI} authentication
+(see \k{config-ssh-auth-gssapi}). This control allows you to change
+the default behaviour.
+
+The current system username is displayed in the dialog as a
+convenience. It is not saved in the configuration; if a saved session
+is later used by a different user, that user's name will be used.
+
+\S{config-termtype} \q{\ii{Terminal-type} string}
+
+\cfg{winhelp-topic}{connection.termtype}
Most servers you might connect to with PuTTY are designed to be
connected to from lots of different types of terminal. In order to
-send the right control sequences to each one, the server will need
+send the right \i{control sequence}s to each one, the server will need
to know what type of terminal it is dealing with. Therefore, each of
the SSH, Telnet and Rlogin protocols allow a text string to be sent
-down the connection describing the terminal.
+down the connection describing the terminal. On a \i{Unix} server,
+this selects an entry from the \i\c{termcap} or \i\c{terminfo} database
+that tells applications what \i{control sequences} to send to the
+terminal, and what character sequences to expect the \i{keyboard}
+to generate.
-PuTTY attempts to emulate the Unix \c{xterm} program, and by default
+PuTTY attempts to emulate the Unix \i\c{xterm} program, and by default
it reflects this by sending \c{xterm} as a terminal-type string. If
you find this is not doing what you want - perhaps the remote
-terminal reports \q{Unknown terminal type} - you could try setting
-this to something different, such as \c{vt220}.
+system reports \q{Unknown terminal type} - you could try setting
+this to something different, such as \i\c{vt220}.
If you're not sure whether a problem is due to the terminal type
setting or not, you probably need to consult the manual for your
application or your server.
-\S{config-username} \q{Auto-login username}
+\S{config-termspeed} \q{\ii{Terminal speed}s}
-All three of the SSH, Telnet and Rlogin protocols allow you to
-specify what user name you want to log in as, without having to type
-it explicitly every time. (Some Telnet servers don't support this.)
+\cfg{winhelp-topic}{connection.termspeed}
+
+The Telnet, Rlogin, and SSH protocols allow the client to specify
+terminal speeds to the server.
+
+This parameter does \e{not} affect the actual speed of the connection,
+which is always \q{as fast as possible}; it is just a hint that is
+sometimes used by server software to modify its behaviour. For
+instance, if a slow speed is indicated, the server may switch to a
+less \i{bandwidth}-hungry display mode.
+
+The value is usually meaningless in a network environment, but
+PuTTY lets you configure it, in case you find the server is reacting
+badly to the default value.
+
+The format is a pair of numbers separated by a comma, for instance,
+\c{38400,38400}. The first number represents the output speed
+(\e{from} the server) in bits per second, and the second is the input
+speed (\e{to} the server). (Only the first is used in the Rlogin
+protocol.)
+
+This option has no effect on Raw connections.
+
+\S{config-environ} Setting \i{environment variables} on the server
+
+\cfg{winhelp-topic}{telnet.environ}
+
+The Telnet protocol provides a means for the client to pass
+environment variables to the server. Many Telnet servers have
+stopped supporting this feature due to security flaws, but PuTTY
+still supports it for the benefit of any servers which have found
+other ways around the security problems than just disabling the
+whole mechanism.
+
+Version 2 of the SSH protocol also provides a similar mechanism,
+which is easier to implement without security flaws. Newer \i{SSH-2}
+servers are more likely to support it than older ones.
+
+This configuration data is not used in the SSH-1, rlogin or raw
+protocols.
+
+To add an environment variable to the list transmitted down the
+connection, you enter the variable name in the \q{Variable} box,
+enter its value in the \q{Value} box, and press the \q{Add} button.
+To remove one from the list, select it in the list box and press
+\q{Remove}.
+
+\H{config-proxy} The Proxy panel
+
+\cfg{winhelp-topic}{proxy.main}
+
+The \ii{Proxy} panel allows you to configure PuTTY to use various types
+of proxy in order to make its network connections. The settings in
+this panel affect the primary network connection forming your PuTTY
+session, and also any extra connections made as a result of SSH \i{port
+forwarding} (see \k{using-port-forwarding}).
+
+Note that unlike some software (such as web browsers), PuTTY does not
+attempt to automatically determine whether to use a proxy and (if so)
+which one to use for a given destination. If you need to use a proxy,
+it must always be explicitly configured.
+
+\S{config-proxy-type} Setting the proxy type
+
+\cfg{winhelp-topic}{proxy.type}
+
+The \q{Proxy type} radio buttons allow you to configure what type of
+proxy you want PuTTY to use for its network connections. The default
+setting is \q{None}; in this mode no proxy is used for any
+connection.
+
+\b Selecting \I{HTTP proxy}\q{HTTP} allows you to proxy your connections
+through a web server supporting the HTTP \cw{CONNECT} command, as documented
+in \W{http://www.ietf.org/rfc/rfc2817.txt}{RFC 2817}.
+
+\b Selecting \q{SOCKS 4} or \q{SOCKS 5} allows you to proxy your
+connections through a \i{SOCKS server}.
+
+\b Many firewalls implement a less formal type of proxy in which a
+user can make a Telnet connection directly to the firewall machine
+and enter a command such as \c{connect myhost.com 22} to connect
+through to an external host. Selecting \I{Telnet proxy}\q{Telnet}
+allows you to tell PuTTY to use this type of proxy.
+
+\b Selecting \I{Local proxy}\q{Local} allows you to specify an arbitrary
+command on the local machine to act as a proxy. When the session is
+started, instead of creating a TCP connection, PuTTY runs the command
+(specified in \k{config-proxy-command}), and uses its standard input and
+output streams.
+
+\lcont{
+This could be used, for instance, to talk to some kind of network proxy
+that PuTTY does not natively support; or you could tunnel a connection
+over something other than TCP/IP entirely.
+
+If you want your local proxy command to make a secondary SSH
+connection to a proxy host and then tunnel the primary connection
+over that, you might well want the \c{-nc} command-line option in
+Plink. See \k{using-cmdline-ncmode} for more information.
+}
+
+\S{config-proxy-exclude} Excluding parts of the network from proxying
+
+\cfg{winhelp-topic}{proxy.exclude}
+
+Typically you will only need to use a proxy to connect to non-local
+parts of your network; for example, your proxy might be required for
+connections outside your company's internal network. In the
+\q{Exclude Hosts/IPs} box you can enter ranges of IP addresses, or
+ranges of DNS names, for which PuTTY will avoid using the proxy and
+make a direct connection instead.
+
+The \q{Exclude Hosts/IPs} box may contain more than one exclusion
+range, separated by commas. Each range can be an IP address or a DNS
+name, with a \c{*} character allowing wildcards. For example:
+
+\c *.example.com
+
+This excludes any host with a name ending in \c{.example.com} from
+proxying.
+
+\c 192.168.88.*
+
+This excludes any host with an IP address starting with 192.168.88
+from proxying.
+
+\c 192.168.88.*,*.example.com
+
+This excludes both of the above ranges at once.
+
+Connections to the local host (the host name \i\c{localhost}, and any
+\i{loopback IP address}) are never proxied, even if the proxy exclude
+list does not explicitly contain them. It is very unlikely that this
+behaviour would ever cause problems, but if it does you can change
+it by enabling \q{Consider proxying local host connections}.
+
+Note that if you are doing \I{proxy DNS}DNS at the proxy (see
+\k{config-proxy-dns}), you should make sure that your proxy
+exclusion settings do not depend on knowing the IP address of a
+host. If the name is passed on to the proxy without PuTTY looking it
+up, it will never know the IP address and cannot check it against
+your list.
+
+\S{config-proxy-dns} \I{proxy DNS}\ii{Name resolution} when using a proxy
+
+\cfg{winhelp-topic}{proxy.dns}
+
+If you are using a proxy to access a private network, it can make a
+difference whether \i{DNS} name resolution is performed by PuTTY itself
+(on the client machine) or performed by the proxy.
+
+The \q{Do DNS name lookup at proxy end} configuration option allows
+you to control this. If you set it to \q{No}, PuTTY will always do
+its own DNS, and will always pass an IP address to the proxy. If you
+set it to \q{Yes}, PuTTY will always pass host names straight to the
+proxy without trying to look them up first.
+
+If you set this option to \q{Auto} (the default), PuTTY will do
+something it considers appropriate for each type of proxy. Telnet,
+HTTP, and SOCKS5 proxies will have host names passed straight to
+them; SOCKS4 proxies will not.
+
+Note that if you are doing DNS at the proxy, you should make sure
+that your proxy exclusion settings (see \k{config-proxy-exclude}) do
+not depend on knowing the IP address of a host. If the name is
+passed on to the proxy without PuTTY looking it up, it will never
+know the IP address and cannot check it against your list.
+
+The original SOCKS 4 protocol does not support proxy-side DNS. There
+is a protocol extension (SOCKS 4A) which does support it, but not
+all SOCKS 4 servers provide this extension. If you enable proxy DNS
+and your SOCKS 4 server cannot deal with it, this might be why.
+
+\S{config-proxy-auth} \I{proxy username}Username and \I{proxy password}password
+
+\cfg{winhelp-topic}{proxy.auth}
+
+If your proxy requires \I{proxy authentication}authentication, you can
+enter a username and a password in the \q{Username} and \q{Password} boxes.
+
+\I{security hazard}Note that if you save your session, the proxy
+password will be saved in plain text, so anyone who can access your PuTTY
+configuration data will be able to discover it.
+
+Authentication is not fully supported for all forms of proxy:
+
+\b Username and password authentication is supported for HTTP
+proxies and SOCKS 5 proxies.
+
+\lcont{
+
+\b With SOCKS 5, authentication is via \i{CHAP} if the proxy
+supports it (this is not supported in \i{PuTTYtel}); otherwise the
+password is sent to the proxy in \I{plaintext password}plain text.
-In this box you can type that user name.
+\b With HTTP proxying, the only currently supported authentication
+method is \I{HTTP basic}\q{basic}, where the password is sent to the proxy
+in \I{plaintext password}plain text.
-\S{config-keepalive} Using keepalives to prevent disconnection
+}
-If you find your sessions are closing unexpectedly (\q{Connection
-reset by peer}) after they have been idle for a while, you might
-want to try using this option.
+\b SOCKS 4 can use the \q{Username} field, but does not support
+passwords.
-Some network routers and firewalls need to keep track of all
-connections through them. Usually, these firewalls will assume a
-connection is dead if no data is transferred in either direction
-after a certain time interval. This can cause PuTTY sessions to be
-unexpectedly closed by the firewall if no traffic is seen in the
-session for some time.
+\b You can specify a way to include a username and password in the
+Telnet/Local proxy command (see \k{config-proxy-command}).
-The keepalive option (\q{Seconds between keepalives}) allows you to
-configure PuTTY to send data through the session at regular
-intervals, in a way that does not disrupt the actual terminal
-session. If you find your firewall is cutting idle connections off,
-you can try entering a non-zero value in this field. The value is
-measured in seconds; so, for example, if your firewall cuts
-connections off after ten minutes then you might want to enter 300
-seconds (5 minutes) in the box.
+\S{config-proxy-command} Specifying the Telnet or Local proxy command
-Note that keepalives are not always helpful. They help if you have a
-firewall which drops your connection after an idle period; but if
-the network between you and the server suffers from breaks in
-connectivity then keepalives can actually make things worse. If a
-session is idle, and connectivity is temporarily lost between the
-endpoints, but the connectivity is restored before either side tries
-to send anything, then there will be no problem - neither endpoint
-will notice that anything was wrong. However, if one side does send
-something during the break, it will repeatedly try to re-send, and
-eventually give up and abandon the connection. Then when
-connectivity is restored, the other side will find that the first
-side doesn't believe there is an open connection any more.
-Keepalives can make this sort of problem worse, because they
-increase the probability that PuTTY will attempt to send data during
-a break in connectivity. Therefore, you might find they help
-connection loss, or you might find they make it worse, depending on
-what \e{kind} of network problems you have between you and the
-server.
+\cfg{winhelp-topic}{proxy.command}
-Keepalives are only supported in Telnet and SSH; the Rlogin and Raw
-protocols offer no way of implementing them.
+If you are using the \i{Telnet proxy} type, the usual command required
+by the firewall's Telnet server is \c{connect}, followed by a host
+name and a port number. If your proxy needs a different command,
+you can enter an alternative here.
-\H{config-telnet} The Telnet panel
+If you are using the \i{Local proxy} type, the local command to run
+is specified here.
-The Telnet panel allows you to configure options that only apply to
-Telnet sessions.
+In this string, you can use \c{\\n} to represent a new-line, \c{\\r}
+to represent a carriage return, \c{\\t} to represent a tab
+character, and \c{\\x} followed by two hex digits to represent any
+other character. \c{\\\\} is used to encode the \c{\\} character
+itself.
-\S{config-termspeed} \q{Terminal-speed string}
+Also, the special strings \c{%host} and \c{%port} will be replaced
+by the host name and port number you want to connect to. The strings
+\c{%user} and \c{%pass} will be replaced by the proxy username and
+password you specify. The strings \c{%proxyhost} and \c{%proxyport}
+will be replaced by the host details specified on the \e{Proxy} panel,
+if any (this is most likely to be useful for the Local proxy type).
+To get a literal \c{%} sign, enter \c{%%}.
-Telnet allows the client to send a text string that describes the
-terminal speed. PuTTY lets you configure this, in case you find the
-server is reacting badly to the default value. (I'm not aware of any
-servers that do have a problem with it.)
+If a Telnet proxy server prompts for a username and password
+before commands can be sent, you can use a command such as:
-\S{config-environ} Setting environment variables on the server
+\c %user\n%pass\nconnect %host %port\n
-The Telnet protocol also provides a means for the client to pass
-environment variables to the server. Many Telnet servers have
-stopped supporting this feature due to security flaws, but PuTTY
-still supports it for the benefit of any servers which have found
-other ways around the security problems than just disabling the
-whole mechanism.
+This will send your username and password as the first two lines to
+the proxy, followed by a command to connect to the desired host and
+port. Note that if you do not include the \c{%user} or \c{%pass}
+tokens in the Telnet command, then the \q{Username} and \q{Password}
+configuration fields will be ignored.
-To add an environment variable to the list transmitted down the
-connection, you enter the variable name in the \q{Variable} box,
-enter its value in the \q{Value} box, and press the \q{Add} button.
-To remove one from the list, select it in the list box and press
-\q{Remove}.
+\H{config-telnet} The \i{Telnet} panel
+
+The Telnet panel allows you to configure options that only apply to
+Telnet sessions.
\S{config-oldenviron} \q{Handling of OLD_ENVIRON ambiguity}
-The original Telnet mechanism for passing environment variables was
+\cfg{winhelp-topic}{telnet.oldenviron}
+
+The original Telnet mechanism for passing \i{environment variables} was
badly specified. At the time the standard (RFC 1408) was written,
BSD telnet implementations were already supporting the feature, and
the intention of the standard was to describe the behaviour the BSD
Sadly there was a typing error in the standard when it was issued,
and two vital function codes were specified the wrong way round. BSD
implementations did not change, and the standard was not corrected.
-Therefore, it's possible you might find either BSD or RFC-compliant
+Therefore, it's possible you might find either \i{BSD} or \i{RFC}-compliant
implementations out there. This switch allows you to choose which
one PuTTY claims to be.
The problem was solved by issuing a second standard, defining a new
-Telnet mechanism called \cw{NEW_ENVIRON}, which behaved exactly like
-the original \cw{OLD_ENVIRON} but was not encumbered by existing
+Telnet mechanism called \i\cw{NEW_ENVIRON}, which behaved exactly like
+the original \i\cw{OLD_ENVIRON} but was not encumbered by existing
implementations. Most Telnet servers now support this, and it's
unambiguous. This feature should only be needed if you have trouble
passing environment variables to quite an old server.
-\S{config-ptelnet} Passive and active Telnet negotiation modes
+\S{config-ptelnet} Passive and active \i{Telnet negotiation} modes
+
+\cfg{winhelp-topic}{telnet.passive}
In a Telnet connection, there are two types of data passed between
the client and the server: actual text, and \e{negotiations} about
PuTTY can use two different strategies for negotiation:
-\b In \e{active} mode, PuTTY starts to send negotiations as soon as
-the connection is opened.
+\b In \I{active Telnet negotiation}\e{active} mode, PuTTY starts to send
+negotiations as soon as the connection is opened.
-\b In \e{passive} mode, PuTTY will wait to negotiate until it sees a
-negotiation from the server.
+\b In \I{passive Telnet negotiation}\e{passive} mode, PuTTY will wait to
+negotiate until it sees a negotiation from the server.
The obvious disadvantage of passive mode is that if the server is
also operating in a passive mode, then negotiation will never begin
at all. For this reason PuTTY defaults to active mode.
However, sometimes passive mode is required in order to successfully
-get through certain types of firewall and Telnet proxy server. If
-you have confusing trouble with a firewall, you could try enabling
+get through certain types of firewall and \i{Telnet proxy} server. If
+you have confusing trouble with a \i{firewall}, you could try enabling
passive mode to see if it helps.
-\S{config-telnetkey} \q{Keyboard sends telnet Backspace and Interrupt}
+\S{config-telnetkey} \q{Keyboard sends \i{Telnet special commands}}
+
+\cfg{winhelp-topic}{telnet.specialkeys}
+
+If this box is checked, several key sequences will have their normal
+actions modified:
-If this box is checked, the Backspace key on the keyboard will send
-the Telnet special backspace code, and Control-C will send the
-Telnet special interrupt code. You probably shouldn't enable this
+\b the Backspace key on the keyboard will send the \I{Erase Character,
+Telnet special command}Telnet special backspace code;
+
+\b Control-C will send the Telnet special \I{Interrupt Process, Telnet
+special command}Interrupt Process code;
+
+\b Control-Z will send the Telnet special \I{Suspend Process, Telnet
+special command}Suspend Process code.
+
+You probably shouldn't enable this
unless you know what you're doing.
+\S{config-telnetnl} \q{Return key sends \i{Telnet New Line} instead of ^M}
+
+\cfg{winhelp-topic}{telnet.newline}
+
+Unlike most other remote login protocols, the Telnet protocol has a
+special \q{\i{new line}} code that is not the same as the usual line
+endings of Control-M or Control-J. By default, PuTTY sends the
+Telnet New Line code when you press Return, instead of sending
+Control-M as it does in most other protocols.
+
+Most Unix-style Telnet servers don't mind whether they receive
+Telnet New Line or Control-M; some servers do expect New Line, and
+some servers prefer to see ^M. If you are seeing surprising
+behaviour when you press Return in a Telnet session, you might try
+turning this option off to see if it helps.
+
\H{config-rlogin} The Rlogin panel
-The Rlogin panel allows you to configure options that only apply to
+The \i{Rlogin} panel allows you to configure options that only apply to
Rlogin sessions.
-\S{config-rlogin-termspeed} \q{Terminal-speed string}
-
-Like Telnet, Rlogin allows the client to send a text string that
-describes the terminal speed. PuTTY lets you configure this, in case
-you find the server is reacting badly to the default value. (I'm not
-aware of any servers that do have a problem with it.)
+\S{config-rlogin-localuser} \I{local username in Rlogin}\q{Local username}
-\S{config-rlogin-localuser} \q{Local username}
+\cfg{winhelp-topic}{rlogin.localuser}
Rlogin allows an automated (password-free) form of login by means of
-a file called \c{.rhosts} on the server. You put a line in your
+a file called \i\c{.rhosts} on the server. You put a line in your
\c{.rhosts} file saying something like \c{jbloggs@pc1.example.com},
and then when you make an Rlogin connection the client transmits the
username of the user running the Rlogin client. The server checks
the username and hostname against \c{.rhosts}, and if they match it
-does not ask for a password.
+\I{passwordless login}does not ask for a password.
This only works because Unix systems contain a safeguard to stop a
user from pretending to be another user in an Rlogin connection.
-Rlogin connections have to come from port numbers below 1024, and
-Unix systems prohibit this to unprivileged processes; so when the
+Rlogin connections have to come from \I{privileged port}port numbers below
+1024, and Unix systems prohibit this to unprivileged processes; so when the
server sees a connection from a low-numbered port, it assumes the
client end of the connection is held by a privileged (and therefore
trusted) process, so it believes the claim of who the user is.
\c{.rhosts} mechanism is completely useless for securely
distinguishing several different users on a Windows machine. If you
have a \c{.rhosts} entry pointing at a Windows PC, you should assume
-that \e{anyone} using that PC can spoof your username in an Rlogin
-connection and access your account on the server.
+that \e{anyone} using that PC can \i{spoof} your username in
+an Rlogin connection and access your account on the server.
The \q{Local username} control allows you to specify what user name
-PuTTY should claim you have, in case it doesn't match your Windows
-user name (or in case you didn't bother to set up a Windows user
+PuTTY should claim you have, in case it doesn't match your \i{Windows
+user name} (or in case you didn't bother to set up a Windows user
name).
\H{config-ssh} The SSH panel
-The SSH panel allows you to configure options that only apply to
+The \i{SSH} panel allows you to configure options that only apply to
SSH sessions.
\S{config-command} Executing a specific command on the server
+\cfg{winhelp-topic}{ssh.command}
+
In SSH, you don't have to run a general shell session on the server.
Instead, you can choose to run a single specific command (such as a
mail user agent, for example). If you want to do this, enter the
-command in the \q{Remote command} box.
+command in the \q{\ii{Remote command}} box.
-\S{config-ssh-pty} \q{Don't allocate a pseudo-terminal}
+Note that most servers will close the session after executing the
+command.
-When connecting to a Unix system, most interactive shell sessions
-are run in a \e{pseudo-terminal}, which allows the Unix system to
-pretend it's talking to a real physical terminal device but allows
-the SSH server to catch all the data coming from that fake device
-and send it back to the client.
+\S{config-ssh-noshell} \q{Don't start a \I{remote shell}shell or
+\I{remote command}command at all}
-Occasionally you might find you have a need to run a session \e{not}
-in a pseudo-terminal. In PuTTY, this is generally only useful for
-very specialist purposes; although in Plink (see \k{plink}) it is
-the usual way of working.
+\cfg{winhelp-topic}{ssh.noshell}
+
+If you tick this box, PuTTY will not attempt to run a shell or
+command after connecting to the remote server. You might want to use
+this option if you are only using the SSH connection for \i{port
+forwarding}, and your user account on the server does not have the
+ability to run a shell.
+
+This feature is only available in \i{SSH protocol version 2} (since the
+version 1 protocol assumes you will always want to run a shell).
+
+This feature can also be enabled using the \c{-N} command-line
+option; see \k{using-cmdline-noshell}.
-\S{config-ssh-comp} \q{Enable compression}
+If you use this feature in Plink, you will not be able to terminate
+the Plink process by any graceful means; the only way to kill it
+will be by pressing Control-C or sending a kill signal from another
+program.
+
+\S{config-ssh-comp} \q{Enable \i{compression}}
+
+\cfg{winhelp-topic}{ssh.compress}
This enables data compression in the SSH connection: data sent by
the server is compressed before sending, and decompressed at the
client end. Likewise, data sent by PuTTY to the server is compressed
first and the server decompresses it at the other end. This can help
-make the most of a low-bandwidth connection.
+make the most of a low-\i{bandwidth} connection.
+
+\S{config-ssh-prot} \q{Preferred \i{SSH protocol version}}
+
+\cfg{winhelp-topic}{ssh.protocol}
+
+This allows you to select whether you would prefer to use \i{SSH protocol
+version 1} or \I{SSH-2}version 2, and whether to permit falling back
+to the other version.
+
+With the settings \q{1} and \q{2}, PuTTY will attempt to use protocol 1
+if the server you connect to does not offer protocol 2, and vice versa.
+
+If you select \q{1 only} or \q{2 only} here, PuTTY will only connect
+if the server you connect to offers the SSH protocol version you
+have specified.
+
+You should normally leave this at the default, \q{2 only}. The older
+SSH-1 protocol is no longer developed, has many known cryptographic
+weaknesses, and is generally not considered to be secure. If you
+permit use of SSH-1 by selecting \q{2} instead of \q{2 only}, an
+active attacker can force downgrade to SSH-1 even if the server
+you're connecting to supports SSH-2.
+
+PuTTY's protocol 1 implementation is provided mainly for
+compatibility, and is no longer being enhanced.
+
+\S{config-ssh-sharing} Sharing an SSH connection between PuTTY tools
+
+\cfg{winhelp-topic}{ssh.sharing}
+
+The controls in this box allow you to configure PuTTY to reuse an
+existing SSH connection, where possible.
+
+The SSH-2 protocol permits you to run multiple data channels over the
+same SSH connection, so that you can log in just once (and do the
+expensive encryption setup just once) and then have more than one
+terminal window open.
+
+Each instance of PuTTY can still run at most one terminal session, but
+using the controls in this box, you can configure PuTTY to check if
+another instance of itself has already connected to the target host,
+and if so, share that instance's SSH connection instead of starting a
+separate new one.
+
+To enable this feature, just tick the box \q{Share SSH connections if
+possible}. Then, whenever you start up a PuTTY session connecting to a
+particular host, it will try to reuse an existing SSH connection if
+one is available. For example, selecting \q{Duplicate Session} from
+the system menu will launch another session on the same host, and if
+sharing is enabled then it will reuse the existing SSH connection.
+
+When this mode is in use, the first PuTTY that connected to a given
+server becomes the \q{upstream}, which means that it is the one
+managing the real SSH connection. All subsequent PuTTYs which reuse
+the connection are referred to as \q{downstreams}: they do not connect
+to the real server at all, but instead connect to the upstream PuTTY
+via local inter-process communication methods.
+
+For this system to be activated, \e{both} the upstream and downstream
+instances of PuTTY must have the sharing option enabled.
+
+The upstream PuTTY can therefore not terminate until all its
+downstreams have closed. This is similar to the effect you get with
+port forwarding or X11 forwarding, in which a PuTTY whose terminal
+session has already finished will still remain open so as to keep
+serving forwarded connections.
+
+In case you need to configure this system in more detail, there are
+two additional checkboxes which allow you to specify whether a
+particular PuTTY can act as an upstream or a downstream or both.
+(These boxes only take effect if the main \q{Share SSH connections if
+possible} box is also ticked.) By default both of these boxes are
+ticked, so that multiple PuTTYs started from the same configuration
+will designate one of themselves as the upstream and share a single
+connection; but if for some reason you need a particular PuTTY
+configuration \e{not} to be an upstream (e.g. because you definitely
+need it to close promptly) or not to be a downstream (e.g. because it
+needs to do its own authentication using a special private key) then
+you can untick one or the other of these boxes.
+
+I have referred to \q{PuTTY} throughout the above discussion, but all
+the other PuTTY tools which make SSH connections can use this
+mechanism too. For example, if PSCP or PSFTP loads a configuration
+with sharing enabled, then it can act as a downstream and use an
+existing SSH connection set up by an instance of GUI PuTTY. The one
+special case is that PSCP and PSFTP will \e{never} act as upstreams.
+
+It is possible to test programmatically for the existence of a live
+upstream using Plink. See \k{plink-option-shareexists}.
+
+\H{config-ssh-kex} The Kex panel
+
+The Kex panel (short for \q{\i{key exchange}}) allows you to configure
+options related to SSH-2 key exchange.
+
+Key exchange occurs at the start of an SSH connection (and
+occasionally thereafter); it establishes a \i{shared secret} that is used
+as the basis for all of SSH's security features. It is therefore very
+important for the security of the connection that the key exchange is
+secure.
+
+Key exchange is a cryptographically intensive process; if either the
+client or the server is a relatively slow machine, the slower methods
+may take several tens of seconds to complete.
+
+If connection startup is too slow, or the connection hangs
+periodically, you may want to try changing these settings.
+
+If you don't understand what any of this means, it's safe to leave
+these settings alone.
+
+This entire panel is only relevant to SSH protocol version 2; none of
+these settings affect SSH-1 at all.
+
+\S{config-ssh-kex-order} \ii{Key exchange algorithm} selection
+
+\cfg{winhelp-topic}{ssh.kex.order}
+
+PuTTY supports a variety of SSH-2 key exchange methods, and allows you
+to choose which one you prefer to use; configuration is similar to
+cipher selection (see \k{config-ssh-encryption}).
+
+PuTTY currently supports the following key exchange methods:
+
+\b \q{ECDH}: \i{elliptic curve} \i{Diffie-Hellman key exchange}.
+
+\b \q{Group 14}: Diffie-Hellman key exchange with a well-known
+2048-bit group.
+
+\b \q{Group 1}: Diffie-Hellman key exchange with a well-known
+1024-bit group. This is less secure \#{FIXME better words} than
+group 14, but may be faster with slow client or server machines,
+and may be the only method supported by older server software.
+
+\b \q{\ii{Group exchange}}: with this method, instead of using a fixed
+group, PuTTY requests that the server suggest a group to use for key
+exchange; the server can avoid groups known to be weak, and possibly
+invent new ones over time, without any changes required to PuTTY's
+configuration. We recommend use of this method, if possible.
+
+\b \q{\i{RSA key exchange}}: this requires much less computational
+effort on the part of the client, and somewhat less on the part of
+the server, than Diffie-Hellman key exchange.
+
+If the first algorithm PuTTY finds is below the \q{warn below here}
+line, you will see a warning box when you make the connection, similar
+to that for cipher selection (see \k{config-ssh-encryption}).
+
+\S{config-ssh-kex-rekey} \ii{Repeat key exchange}
+
+\cfg{winhelp-topic}{ssh.kex.repeat}
+
+If the session key negotiated at connection startup is used too much
+or for too long, it may become feasible to mount attacks against the
+SSH connection. Therefore, the SSH-2 protocol specifies that a new key
+exchange should take place every so often; this can be initiated by
+either the client or the server.
+
+While this renegotiation is taking place, no data can pass through
+the SSH connection, so it may appear to \q{freeze}. (The occurrence of
+repeat key exchange is noted in the Event Log; see
+\k{using-eventlog}.) Usually the same algorithm is used as at the
+start of the connection, with a similar overhead.
+
+These options control how often PuTTY will initiate a repeat key
+exchange (\q{rekey}). You can also force a key exchange at any time
+from the Special Commands menu (see \k{using-specials}).
+
+\# FIXME: do we have any additions to the SSH-2 specs' advice on
+these values? Do we want to enforce any limits?
+
+\b \q{Max minutes before rekey} specifies the amount of time that is
+allowed to elapse before a rekey is initiated. If this is set to zero,
+PuTTY will not rekey due to elapsed time. The SSH-2 protocol
+specification recommends a timeout of at most 60 minutes.
+
+You might have a need to disable time-based rekeys completely for the same
+reasons that \i{keepalives} aren't always helpful. If you anticipate
+suffering a network dropout of several hours in the middle of an SSH
+connection, but were not actually planning to send \e{data} down
+that connection during those hours, then an attempted rekey in the
+middle of the dropout will probably cause the connection to be
+abandoned, whereas if rekeys are disabled then the connection should
+in principle survive (in the absence of interfering \i{firewalls}). See
+\k{config-keepalive} for more discussion of these issues; for these
+purposes, rekeys have much the same properties as keepalives.
+(Except that rekeys have cryptographic value in themselves, so you
+should bear that in mind when deciding whether to turn them off.)
+Note, however, the the SSH \e{server} can still initiate rekeys.
+
+\b \q{Max data before rekey} specifies the amount of data (in bytes)
+that is permitted to flow in either direction before a rekey is
+initiated. If this is set to zero, PuTTY will not rekey due to
+transferred data. The SSH-2 protocol specification recommends a limit
+of at most 1 gigabyte.
+
+\lcont{
+
+As well as specifying a value in bytes, the following shorthand can be
+used:
+
+\b \cq{1k} specifies 1 kilobyte (1024 bytes).
+
+\b \cq{1M} specifies 1 megabyte (1024 kilobytes).
+
+\b \cq{1G} specifies 1 gigabyte (1024 megabytes).
+
+}
+
+Disabling data-based rekeys entirely is a bad idea. The \i{integrity},
+and to a lesser extent, \i{confidentiality} of the SSH-2 protocol depend
+in part on rekeys occuring before a 32-bit packet sequence number
+wraps around. Unlike time-based rekeys, data-based rekeys won't occur
+when the SSH connection is idle, so they shouldn't cause the same
+problems. The SSH-1 protocol, incidentally, has even weaker integrity
+protection than SSH-2 without rekeys.
+
+\H{config-ssh-hostkey} The Host Keys panel
+
+The Host Keys panel allows you to configure options related to SSH-2
+\i{host key management}.
+
+Host keys are used to prove the server's identity, and assure you that
+the server is not being spoofed (either by a man-in-the-middle attack
+or by completely replacing it on the network). See \k{gs-hostkey} for
+a basic introduction to host keys.
+
+This entire panel is only relevant to SSH protocol version 2; none of
+these settings affect SSH-1 at all.
-\S{config-ssh-prot} \q{Preferred SSH protocol version}
+\S{config-ssh-hostkey-order} \ii{Host key type} selection
-This allows you to select whether you would like to use SSH protocol
-version 1 or version 2. \#{FIXME: say something about this elsewhere?}
+\cfg{winhelp-topic}{ssh.hostkey.order}
-PuTTY will attempt to use protocol 1 if the server you connect to
-does not offer protocol 2, and vice versa.
+PuTTY supports a variety of SSH-2 host key types, and allows you to
+choose which one you prefer to use to identify the server.
+Configuration is similar to cipher selection (see
+\k{config-ssh-encryption}).
-\S{config-ssh-macbug} \q{Imitate SSH 2 MAC bug}
+PuTTY currently supports the following host key types:
-This option \e{should} now be unnecessary. It existed in order to
-work around a bug in early versions (2.3.0 and below) of the SSH
-server software from \cw{ssh.com}. The symptom of this problem would
-be that PuTTY would die unexpectedly at the beginning of the
-session, saying \q{Incorrect MAC received on packet}.
+\b \q{Ed25519}: \i{Edwards-curve} \i{DSA} using a twisted Edwards
+curve with modulus \cw{2^255-19}.
-Current versions of PuTTY attempt to detect these faulty servers and
-enable the bug compatibility automatically, so you should never need
-to use this option any more.
+\b \q{ECDSA}: \i{elliptic curve} \i{DSA} using one of the
+NIST-standardised elliptic curves.
-\S{config-ssh-encryption} Encryption algorithm selection
+\b \q{DSA}: straightforward \i{DSA} using modular exponentiation.
-PuTTY supports a variety of different encryption algorithms, and
+\b \q{RSA}: the ordinary \i{RSA} algorithm.
+
+If PuTTY already has one or more host keys stored for the server,
+it will prefer to use one of those, even if the server has a key
+type that is higher in the preference order. You can add such a
+key to PuTTY's cache from within an existing session using the
+\q{Special Commands} menu; see \k{using-specials}.
+
+Otherwise, PuTTY will choose a key type based purely on the
+preference order you specify in the configuration.
+
+If the first key type PuTTY finds is below the \q{warn below here}
+line, you will see a warning box when you make the connection, similar
+to that for cipher selection (see \k{config-ssh-encryption}).
+
+\S{config-ssh-kex-manual-hostkeys} \ii{Manually configuring host keys}
+
+\cfg{winhelp-topic}{ssh.kex.manualhostkeys}
+
+In some situations, if PuTTY's automated host key management is not
+doing what you need, you might need to manually configure PuTTY to
+accept a specific host key, or one of a specific set of host keys.
+
+One reason why you might want to do this is because the host name
+PuTTY is connecting to is using round-robin DNS to return one of
+multiple actual servers, and they all have different host keys. In
+that situation, you might need to configure PuTTY to accept any of a
+list of host keys for the possible servers, while still rejecting any
+key not in that list.
+
+Another reason is if PuTTY's automated host key management is
+completely unavailable, e.g. because PuTTY (or Plink or PSFTP, etc) is
+running in a Windows environment without access to the Registry. In
+that situation, you will probably want to use the \cw{-hostkey}
+command-line option to configure the expected host key(s); see
+\k{using-cmdline-hostkey}.
+
+For situations where PuTTY's automated host key management simply
+picks the wrong host name to store a key under, you may want to
+consider setting a \q{logical host name} instead; see
+\k{config-loghost}.
+
+To configure manual host keys via the GUI, enter some text describing
+the host key into the edit box in the \q{Manually configure host keys
+for this connection} container, and press the \q{Add} button. The text
+will appear in the \q{Host keys or fingerprints to accept} list box.
+You can remove keys again with the \q{Remove} button.
+
+The text describing a host key can be in one of the following formats:
+
+\b An MD5-based host key fingerprint of the form displayed in PuTTY's
+Event Log and host key dialog boxes, i.e. sixteen 2-digit hex numbers
+separated by colons.
+
+\b A base64-encoded blob describing an SSH-2 public key in
+OpenSSH's one-line public key format. How you acquire a public key in
+this format is server-dependent; on an OpenSSH server it can typically
+be found in a location like \c{/etc/ssh/ssh_host_rsa_key.pub}.
+
+If this box contains at least one host key or fingerprint when PuTTY
+makes an SSH connection, then PuTTY's automated host key management is
+completely bypassed: the connection will be permitted if and only if
+the host key presented by the server is one of the keys listed in this
+box, and the \I{host key cache}host key store in the Registry will be
+neither read \e{nor written}, unless you explicitly do so.
+
+If the box is empty (as it usually is), then PuTTY's automated host
+key management will work as normal.
+
+\H{config-ssh-encryption} The Cipher panel
+
+\cfg{winhelp-topic}{ssh.ciphers}
+
+PuTTY supports a variety of different \i{encryption algorithm}s, and
allows you to choose which one you prefer to use. You can do this by
-dragging the algorithms up and down in the list box to specify a
-preference order. When you make an SSH connection, PuTTY will search
-down the list from the top until it finds an algorithm supported by
-the server, and then use that.
+dragging the algorithms up and down in the list box (or moving them
+using the Up and Down buttons) to specify a preference order. When
+you make an SSH connection, PuTTY will search down the list from the
+top until it finds an algorithm supported by the server, and then
+use that.
+
+PuTTY currently supports the following algorithms:
+
+\b \i{ChaCha20-Poly1305}, a combined cipher and \i{MAC} (SSH-2 only)
+
+\b \i{AES} (Rijndael) - 256, 192, or 128-bit SDCTR or CBC (SSH-2 only)
+
+\b \i{Arcfour} (RC4) - 256 or 128-bit stream cipher (SSH-2 only)
+
+\b \i{Blowfish} - 256-bit SDCTR (SSH-2 only) or 128-bit CBC
+
+\b \ii{Triple-DES} - 168-bit SDCTR (SSH-2 only) or CBC
+
+\b \ii{Single-DES} - 56-bit CBC (see below for SSH-2)
If the algorithm PuTTY finds is below the \q{warn below here} line,
you will see a warning box when you make the connection:
This warns you that the first available encryption is not a very
secure one. Typically you would put the \q{warn below here} line
between the encryptions you consider secure and the ones you
-consider substandard.
-
-By default, PuTTY supplies a preference order intended to reflect a
-reasonable preference in terms of security and speed.
+consider substandard. By default, PuTTY supplies a preference order
+intended to reflect a reasonable preference in terms of security and
+speed.
+
+In SSH-2, the encryption algorithm is negotiated independently for
+each direction of the connection, although PuTTY does not support
+separate configuration of the preference orders. As a result you may
+get two warnings similar to the one above, possibly with different
+encryptions.
+
+Single-DES is not recommended in the SSH-2 protocol
+standards, but one or two server implementations do support it.
+PuTTY can use single-DES to interoperate with
+these servers if you enable the \q{Enable legacy use of single-DES in
+SSH-2} option; by default this is disabled and PuTTY will stick to
+recommended ciphers.
\H{config-ssh-auth} The Auth panel
-The Auth panel allows you to configure authentication options for
+The Auth panel allows you to configure \i{authentication} options for
SSH sessions.
-\S{config-ssh-tis} \q{Attempt TIS or CryptoCard authentication}
+\S{config-ssh-banner} \q{Display pre-authentication banner}
+
+\cfg{winhelp-topic}{ssh.auth.banner}
+
+SSH-2 servers can provide a message for clients to display to the
+prospective user before the user logs in; this is sometimes known as a
+pre-authentication \q{\i{banner}}. Typically this is used to provide
+information about the server and legal notices.
+
+By default, PuTTY displays this message before prompting for a
+password or similar credentials (although, unfortunately, not before
+prompting for a login name, due to the nature of the protocol design).
+By unchecking this option, display of the banner can be suppressed
+entirely.
+
+\S{config-ssh-noauth} \q{Bypass authentication entirely}
+
+\cfg{winhelp-topic}{ssh.auth.bypass}
+
+In SSH-2, it is in principle possible to establish a connection
+without using SSH's mechanisms to identify or prove who you are
+to the server. An SSH server could prefer to handle authentication
+in the data channel, for instance, or simply require no user
+authentication whatsoever.
-TIS and CryptoCard authentication are simple challenge/response
-forms of authentication available in SSH protocol version 1 only.
-You might use them if you were using S/Key one-time passwords, for
-example, or if you had a physical security token that generated
-responses to authentication challenges.
+By default, PuTTY assumes the server requires authentication (we've
+never heard of one that doesn't), and thus must start this process
+with a username. If you find you are getting username prompts that
+you cannot answer, you could try enabling this option. However,
+most SSH servers will reject this.
+
+This is not the option you want if you have a username and just want
+PuTTY to remember it; for that see \k{config-username}.
+It's also probably not what if you're trying to set up passwordless
+login to a mainstream SSH server; depending on the server, you
+probably wanted public-key authentication (\k{pubkey})
+or perhaps GSSAPI authentication (\k{config-ssh-auth-gssapi}).
+(These are still forms of authentication, even if you don't have to
+interact with them.)
+
+This option only affects SSH-2 connections. SSH-1 connections always
+require an authentication step.
+
+\S{config-ssh-tryagent} \q{Attempt authentication using Pageant}
+
+\cfg{winhelp-topic}{ssh.auth.pageant}
+
+If this option is enabled, then PuTTY will look for Pageant (the SSH
+private-key storage agent) and attempt to authenticate with any
+suitable public keys Pageant currently holds.
+
+This behaviour is almost always desirable, and is therefore enabled
+by default. In rare cases you might need to turn it off in order to
+force authentication by some non-public-key method such as
+passwords.
+
+This option can also be controlled using the \c{-noagent}
+command-line option. See \k{using-cmdline-agentauth}.
+
+See \k{pageant} for more information about Pageant in general.
+
+\S{config-ssh-tis} \q{Attempt \I{TIS authentication}TIS or
+\i{CryptoCard authentication}}
+
+\cfg{winhelp-topic}{ssh.auth.tis}
+
+TIS and CryptoCard authentication are (despite their names) generic
+forms of simple \I{challenge/response authentication}challenge/response
+authentication available in SSH protocol version 1 only. You might use
+them if you were using \i{S/Key} \i{one-time passwords}, for example,
+or if you had a physical \i{security token} that generated responses
+to authentication challenges. They can even be used to prompt for
+simple passwords.
With this switch enabled, PuTTY will attempt these forms of
authentication if the server is willing to try them. You will be
-presented with a challenge string (which will be different every
+presented with a challenge string (which may be different every
time) and must supply the correct response in order to log in. If
your server supports this, you should talk to your system
administrator about precisely what form these challenges and
responses take.
-\S{config-ssh-agentfwd} \q{Allow agent forwarding}
+\S{config-ssh-ki} \q{Attempt \i{keyboard-interactive authentication}}
+
+\cfg{winhelp-topic}{ssh.auth.ki}
+
+The SSH-2 equivalent of TIS authentication is called
+\q{keyboard-interactive}. It is a flexible authentication method
+using an arbitrary sequence of requests and responses; so it is not
+only useful for \I{challenge/response authentication}challenge/response
+mechanisms such as \i{S/Key}, but it can also be used for (for example)
+asking the user for a \I{password expiry}new password when the old one
+has expired.
+
+PuTTY leaves this option enabled by default, but supplies a switch
+to turn it off in case you should have trouble with it.
+
+\S{config-ssh-agentfwd} \q{Allow \i{agent forwarding}}
+
+\cfg{winhelp-topic}{ssh.auth.agentfwd}
This option allows the SSH server to open forwarded connections back
-to your local copy of Pageant. If you are not running Pageant, this
+to your local copy of \i{Pageant}. If you are not running Pageant, this
option will do nothing.
See \k{pageant} for general information on Pageant, and
there is a security risk involved with enabling this option; see
\k{pageant-security} for details.
-\S{config-ssh-privkey} \q{Private key file for authentication}
+\S{config-ssh-changeuser} \q{Allow attempted \i{changes of username} in SSH-2}
+
+\cfg{winhelp-topic}{ssh.auth.changeuser}
+
+In the SSH-1 protocol, it is impossible to change username after
+failing to authenticate. So if you mis-type your username at the
+PuTTY \q{login as:} prompt, you will not be able to change it except
+by restarting PuTTY.
+
+The SSH-2 protocol \e{does} allow changes of username, in principle,
+but does not make it mandatory for SSH-2 servers to accept them. In
+particular, \i{OpenSSH} does not accept a change of username; once you
+have sent one username, it will reject attempts to try to
+authenticate as another user. (Depending on the version of OpenSSH,
+it may quietly return failure for all login attempts, or it may send
+an error message.)
+
+For this reason, PuTTY will by default not prompt you for your
+username more than once, in case the server complains. If you know
+your server can cope with it, you can enable the \q{Allow attempted
+changes of username} option to modify PuTTY's behaviour.
+
+\S{config-ssh-privkey} \q{\ii{Private key} file for authentication}
+
+\cfg{winhelp-topic}{ssh.auth.privkey}
This box is where you enter the name of your private key file if you
-are using public key authentication. See \k{pubkey} for information
+are using \i{public key authentication}. See \k{pubkey} for information
about public key authentication in SSH.
-\H{config-ssh-tunnels} The Tunnels panel
+This key must be in PuTTY's native format (\c{*.\i{PPK}}). If you have a
+private key in another format that you want to use with PuTTY, see
+\k{puttygen-conversions}.
+
+You can use the authentication agent \i{Pageant} so that you do not
+need to explicitly configure a key here; see \k{pageant}.
+
+If a private key file is specified here with Pageant running, PuTTY
+will first try asking Pageant to authenticate with that key, and
+ignore any other keys Pageant may have. If that fails, PuTTY will ask
+for a passphrase as normal. You can also specify a \e{public} key file
+in this case (in RFC 4716 or OpenSSH format), as that's sufficient to
+identify the key to Pageant, but of course if Pageant isn't present
+PuTTY can't fall back to using this file itself.
+
+\H{config-ssh-auth-gssapi} The \i{GSSAPI} panel
+
+\cfg{winhelp-topic}{ssh.auth.gssapi}
+
+The \q{GSSAPI} subpanel of the \q{Auth} panel controls the use of
+GSSAPI authentication. This is a mechanism which delegates the
+authentication exchange to a library elsewhere on the client
+machine, which in principle can authenticate in many different ways
+but in practice is usually used with the \i{Kerberos} \i{single sign-on}
+protocol to implement \i{passwordless login}.
+
+GSSAPI is only available in the SSH-2 protocol.
+
+The topmost control on the GSSAPI subpanel is the checkbox labelled
+\q{Attempt GSSAPI authentication}. If this is disabled, GSSAPI will
+not be attempted at all and the rest of this panel is unused. If it
+is enabled, GSSAPI authentication will be attempted, and (typically)
+if your client machine has valid Kerberos credentials loaded, then
+PuTTY should be able to authenticate automatically to servers that
+support Kerberos logins.
+
+\S{config-ssh-auth-gssapi-delegation} \q{Allow GSSAPI credential
+delegation}
+
+\cfg{winhelp-topic}{ssh.auth.gssapi.delegation}
+
+\i{GSSAPI credential delegation} is a mechanism for passing on your
+Kerberos (or other) identity to the session on the SSH server. If
+you enable this option, then not only will PuTTY be able to log in
+automatically to a server that accepts your Kerberos credentials,
+but also you will be able to connect out from that server to other
+Kerberos-supporting services and use the same credentials just as
+automatically.
+
+(This option is the Kerberos analogue of SSH agent forwarding; see
+\k{pageant-forward} for some information on that.)
+
+Note that, like SSH agent forwarding, there is a security
+implication in the use of this option: the administrator of the
+server you connect to, or anyone else who has cracked the
+administrator account on that server, could fake your identity when
+connecting to further Kerberos-supporting services. However,
+Kerberos sites are typically run by a central authority, so the
+administrator of one server is likely to already have access to the
+other services too; so this would typically be less of a risk than
+SSH agent forwarding.
+
+\S{config-ssh-auth-gssapi-libraries} Preference order for GSSAPI
+libraries
+
+\cfg{winhelp-topic}{ssh.auth.gssapi.libraries}
+
+GSSAPI is a mechanism which allows more than one authentication
+method to be accessed through the same interface. Therefore, more
+than one authentication library may exist on your system which can
+be accessed using GSSAPI.
+
+PuTTY contains native support for a few well-known such libraries,
+and will look for all of them on your system and use whichever it
+finds. If more than one exists on your system and you need to use a
+specific one, you can adjust the order in which it will search using
+this preference list control.
+
+One of the options in the preference list is to use a user-specified
+GSSAPI library. If the library you want to use is not mentioned by
+name in PuTTY's list of options, you can enter its full pathname in
+the \q{User-supplied GSSAPI library path} field, and move the
+\q{User-supplied GSSAPI library} option in the preference list to
+make sure it is selected before anything else.
+
+\H{config-ssh-tty} The TTY panel
+
+The TTY panel lets you configure the remote pseudo-terminal.
+
+\S{config-ssh-pty} \I{pseudo-terminal allocation}\q{Don't allocate
+a pseudo-terminal}
+
+\cfg{winhelp-topic}{ssh.nopty}
+
+When connecting to a \i{Unix} system, most \I{interactive
+connections}interactive shell sessions are run in a \e{pseudo-terminal},
+which allows the Unix system to pretend it's talking to a real physical
+terminal device but allows the SSH server to catch all the data coming
+from that fake device and send it back to the client.
-The Tunnels panel allows you to configure tunnelling of other
-connection types through an SSH connection.
+Occasionally you might find you have a need to run a session \e{not}
+in a pseudo-terminal. In PuTTY, this is generally only useful for
+very specialist purposes; although in Plink (see \k{plink}) it is
+the usual way of working.
-\S{config-ssh-x11} X11 forwarding
+\S{config-ttymodes} Sending \i{terminal modes}
-If your server lets you run X Window System applications, X11
-forwarding allows you to securely give those applications access to
-a local X display on your PC.
+\cfg{winhelp-topic}{ssh.ttymodes}
+
+The SSH protocol allows the client to send \q{terminal modes} for
+the remote pseudo-terminal. These usually control the server's
+expectation of the local terminal's behaviour.
+
+If your server does not have sensible defaults for these modes, you
+may find that changing them here helps. If you don't understand any of
+this, it's safe to leave these settings alone.
+
+(None of these settings will have any effect if no pseudo-terminal
+is requested or allocated.)
+
+You can add or modify a mode by selecting it from the drop-down list,
+choosing whether it's set automatically or to a specific value with
+the radio buttons and edit box, and hitting \q{Add}. A mode (or
+several) can be removed from the list by selecting them and hitting
+\q{Remove}. The effect of the mode list is as follows:
-This feature will only be useful if you have an X server on your PC,
-such as Exceed or XWin32.
+\b If a mode is not on the list, it will not be specified to the
+server under any circumstances.
+
+\b If a mode is on the list:
+
+\lcont{
+
+\b If the \q{Auto} option is selected, the PuTTY tools will decide
+whether to specify that mode to the server, and if so, will send
+a sensible value.
+
+\lcont{
+
+PuTTY proper will send modes that it has an opinion on (currently only
+the code for the Backspace key, \cw{ERASE}). Plink on Unix
+will propagate appropriate modes from the local terminal, if any.
+
+}
+
+\b If a value is specified, it will be sent to the server under all
+circumstances. The precise syntax of the value box depends on the
+mode.
+
+}
+
+By default, all of the available modes are listed as \q{Auto},
+which should do the right thing in most circumstances.
+
+The precise effect of each setting, if any, is up to the server. Their
+names come from \i{POSIX} and other Unix systems, and they are most
+likely to have a useful effect on such systems. (These are the same
+settings that can usually be changed using the \i\c{stty} command once
+logged in to such servers.)
+
+Some notable modes are described below; for fuller explanations, see
+your server documentation.
+
+\b \I{ERASE special character}\cw{ERASE} is the character that when typed
+by the user will delete one space to the left. When set to \q{Auto}
+(the default setting), this follows the setting of the local Backspace
+key in PuTTY (see \k{config-backspace}).
+
+\lcont{
+This and other \i{special character}s are specified using \c{^C} notation
+for Ctrl-C, and so on. Use \c{^<27>} or \c{^<0x1B>} to specify a
+character numerically, and \c{^~} to get a literal \c{^}. Other
+non-control characters are denoted by themselves. Leaving the box
+entirely blank indicates that \e{no} character should be assigned to
+the specified function, although this may not be supported by all
+servers.
+}
+
+\b \I{QUIT special character}\cw{QUIT} is a special character that
+usually forcefully ends the current process on the server
+(\cw{SIGQUIT}). On many servers its default setting is Ctrl-backslash
+(\c{^\\}), which is easy to accidentally invoke on many keyboards. If
+this is getting in your way, you may want to change it to another
+character or turn it off entirely.
+
+\b Boolean modes such as \cw{ECHO} and \cw{ICANON} can be specified in
+PuTTY in a variety of ways, such as \cw{true}/\cw{false},
+\cw{yes}/\cw{no}, and \cw{0}/\cw{1}.
+
+\b Terminal speeds are configured elsewhere; see \k{config-termspeed}.
+
+\H{config-ssh-x11} The X11 panel
+
+\cfg{winhelp-topic}{ssh.tunnels.x11}
+
+The X11 panel allows you to configure \i{forwarding of X11} over an
+SSH connection.
+
+If your server lets you run X Window System \i{graphical applications},
+X11 forwarding allows you to securely give those applications access to
+a local X display on your PC.
To enable X11 forwarding, check the \q{Enable X11 forwarding} box.
-If your X display is not the primary display on your local machine
-(which it almost certainly will be unless you have deliberately
-arranged otherwise), you need to enter its location in the \q{X
-display location} box.
-
-\# FIXME: perhaps link to some more general X forwarding info?
-
-\S{config-ssh-portfwd} Port forwarding
-
-Port forwarding allows you to tunnel other types of network
-connection down an SSH connection.
-
-To set up a local port forwarding, make sure the \q{Local} radio
-button is set. Then enter a local port number (on your PC) in the
-\q{Source port} box, and a hostname and port number (separated by a
-colon) in the \q{Destination} box, and finally press the \q{Add}
-button. For example, you might select a source port of 10079, and a
-destination of \c{server2.example.com:79}.
-
-If you do this, and then start the session, you should find that
-connecting to your local PC on port 10079 gives you a connection to
-port 79 (the finger server) on \c{server2.example.com}. The
-connection is actually going to PuTTY itself, which encrypts the
-connection data and sends it down the secure channel to the SSH
-server. The connection then proceeds in clear from there to the
-eventual destination. So you might use this (for example) to forward
-a connection between two non-hostile network zones that are only
-connected by a hostile zone such as the open Internet.
-
-You can forward ports on the SSH server machine in the other
-direction, too (so the connection will start at the server end and
-be sent down the secure connection to PuTTY, which will make the
-real connection to the destination). To work this way round, just
-click the \q{Remote} radio button instead of \q{Local}.
-
-\# FIXME: perhaps move this to a general port-forwarding section and
-\# just link to it here?
-
-\H{config-file} Storing configuration in a file
+If your X display is somewhere unusual, you will need to enter its
+location in the \q{X display location} box; if this is left blank,
+PuTTY will try to find a sensible default in the environment, or use the
+primary local display (\c{:0}) if that fails.
+
+See \k{using-x-forwarding} for more information about X11
+forwarding.
+
+\S{config-ssh-x11auth} Remote \i{X11 authentication}
+
+\cfg{winhelp-topic}{ssh.tunnels.x11auth}
+
+If you are using X11 forwarding, the virtual X server created on the
+SSH server machine will be protected by authorisation data. This
+data is invented, and checked, by PuTTY.
+
+The usual authorisation method used for this is called
+\i\cw{MIT-MAGIC-COOKIE-1}. This is a simple password-style protocol:
+the X client sends some cookie data to the server, and the server
+checks that it matches the real cookie. The cookie data is sent over
+an unencrypted X11 connection; so if you allow a client on a third
+machine to access the virtual X server, then the cookie will be sent
+in the clear.
+
+PuTTY offers the alternative protocol \i\cw{XDM-AUTHORIZATION-1}. This
+is a cryptographically authenticated protocol: the data sent by the
+X client is different every time, and it depends on the IP address
+and port of the client's end of the connection and is also stamped
+with the current time. So an eavesdropper who captures an
+\cw{XDM-AUTHORIZATION-1} string cannot immediately re-use it for
+their own X connection.
+
+PuTTY's support for \cw{XDM-AUTHORIZATION-1} is a somewhat
+experimental feature, and may encounter several problems:
+
+\b Some X clients probably do not even support
+\cw{XDM-AUTHORIZATION-1}, so they will not know what to do with the
+data PuTTY has provided.
+
+\b This authentication mechanism will only work in SSH-2. In SSH-1,
+the SSH server does not tell the client the source address of
+a forwarded connection in a machine-readable format, so it's
+impossible to verify the \cw{XDM-AUTHORIZATION-1} data.
+
+\b You may find this feature causes problems with some SSH servers,
+which will not clean up \cw{XDM-AUTHORIZATION-1} data after a
+session, so that if you then connect to the same server using
+a client which only does \cw{MIT-MAGIC-COOKIE-1} and are allocated
+the same remote display number, you might find that out-of-date
+authentication data is still present on your server and your X
+connections fail.
+
+PuTTY's default is \cw{MIT-MAGIC-COOKIE-1}. If you change it, you
+should be sure you know what you're doing.
+
+\S{config-ssh-xauthority} X authority file for local display
+
+\cfg{winhelp-topic}{ssh.tunnels.xauthority}
+
+If you are using X11 forwarding, the local X server to which your
+forwarded connections are eventually directed may itself require
+authorisation.
+
+Some Windows X servers do not require this: they do authorisation by
+simpler means, such as accepting any connection from the local
+machine but not from anywhere else. However, if your X server does
+require authorisation, then PuTTY needs to know what authorisation
+is required.
+
+One way in which this data might be made available is for the X
+server to store it somewhere in a file which has the same format
+as the Unix \c{.Xauthority} file. If this is how your Windows X
+server works, then you can tell PuTTY where to find this file by
+configuring this option. By default, PuTTY will not attempt to find
+any authorisation for your local display.
+
+\H{config-ssh-portfwd} \I{port forwarding}The Tunnels panel
+
+\cfg{winhelp-topic}{ssh.tunnels.portfwd}
+
+The Tunnels panel allows you to configure tunnelling of arbitrary
+connection types through an SSH connection.
+
+Port forwarding allows you to tunnel other types of \i{network
+connection} down an SSH session. See \k{using-port-forwarding} for a
+general discussion of port forwarding and how it works.
+
+The port forwarding section in the Tunnels panel shows a list of all
+the port forwardings that PuTTY will try to set up when it connects
+to the server. By default no port forwardings are set up, so this
+list is empty.
+
+To add a port forwarding:
+
+\b Set one of the \q{Local} or \q{Remote} radio buttons, depending
+on whether you want to \I{local port forwarding}forward a local port
+to a remote destination (\q{Local}) or \I{remote port forwarding}forward
+a remote port to a local destination (\q{Remote}). Alternatively,
+select \q{Dynamic} if you want PuTTY to \I{dynamic port forwarding}provide
+a local SOCKS 4/4A/5 proxy on a local port (note that this proxy only
+supports TCP connections; the SSH protocol does not support forwarding
+\i{UDP}).
+
+\b Enter a source \i{port number} into the \q{Source port} box. For
+local forwardings, PuTTY will listen on this port of your PC. For
+remote forwardings, your SSH server will listen on this port of the
+remote machine. Note that most servers will not allow you to listen
+on \I{privileged port}port numbers less than 1024.
+
+\b If you have selected \q{Local} or \q{Remote} (this step is not
+needed with \q{Dynamic}), enter a hostname and port number separated
+by a colon, in the \q{Destination} box. Connections received on the
+source port will be directed to this destination. For example, to
+connect to a POP-3 server, you might enter
+\c{popserver.example.com:110}. (If you need to enter a literal
+\i{IPv6 address}, enclose it in square brackets, for instance
+\cq{[::1]:2200}.)
+
+\b Click the \q{Add} button. Your forwarding details should appear
+in the list box.
+
+To remove a port forwarding, simply select its details in the list
+box, and click the \q{Remove} button.
+
+In the \q{Source port} box, you can also optionally enter an \I{listen
+address}IP address to listen on, by specifying (for instance)
+\c{127.0.0.5:79}.
+See \k{using-port-forwarding} for more information on how this
+works and its restrictions.
+
+In place of port numbers, you can enter \i{service names}, if they are
+known to the local system. For instance, in the \q{Destination} box,
+you could enter \c{popserver.example.com:pop3}.
+
+You can \I{port forwarding, changing mid-session}modify the currently
+active set of port forwardings in mid-session using \q{Change
+Settings} (see \k{using-changesettings}). If you delete a local or
+dynamic port forwarding in mid-session, PuTTY will stop listening for
+connections on that port, so it can be re-used by another program. If
+you delete a remote port forwarding, note that:
+
+\b The SSH-1 protocol contains no mechanism for asking the server to
+stop listening on a remote port.
+
+\b The SSH-2 protocol does contain such a mechanism, but not all SSH
+servers support it. (In particular, \i{OpenSSH} does not support it in
+any version earlier than 3.9.)
+
+If you ask to delete a remote port forwarding and PuTTY cannot make
+the server actually stop listening on the port, it will instead just
+start refusing incoming connections on that port. Therefore,
+although the port cannot be reused by another program, you can at
+least be reasonably sure that server-side programs can no longer
+access the service at your end of the port forwarding.
+
+If you delete a forwarding, any existing connections established using
+that forwarding remain open. Similarly, changes to global settings
+such as \q{Local ports accept connections from other hosts} only take
+effect on new forwardings.
+
+If the connection you are forwarding over SSH is itself a second SSH
+connection made by another copy of PuTTY, you might find the
+\q{logical host name} configuration option useful to warn PuTTY of
+which host key it should be expecting. See \k{config-loghost} for
+details of this.
+
+\S{config-ssh-portfwd-localhost} Controlling the visibility of
+forwarded ports
+
+\cfg{winhelp-topic}{ssh.tunnels.portfwd.localhost}
+
+The source port for a forwarded connection usually does not accept
+connections from any machine except the \I{localhost}SSH client or
+server machine itself (for local and remote forwardings respectively).
+There are controls in the Tunnels panel to change this:
+
+\b The \q{Local ports accept connections from other hosts} option
+allows you to set up local-to-remote port forwardings in such a way
+that machines other than your client PC can connect to the forwarded
+port. (This also applies to dynamic SOCKS forwarding.)
+
+\b The \q{Remote ports do the same} option does the same thing for
+remote-to-local port forwardings (so that machines other than the
+SSH server machine can connect to the forwarded port.) Note that
+this feature is only available in the SSH-2 protocol, and not all
+SSH-2 servers support it (\i{OpenSSH} 3.0 does not, for example).
+
+\S{config-ssh-portfwd-address-family} Selecting \i{Internet protocol
+version} for forwarded ports
+
+\cfg{winhelp-topic}{ssh.tunnels.portfwd.ipversion}
+
+This switch allows you to select a specific Internet protocol (\i{IPv4}
+or \i{IPv6}) for the local end of a forwarded port. By default, it is
+set on \q{Auto}, which means that:
+
+\b for a local-to-remote port forwarding, PuTTY will listen for
+incoming connections in both IPv4 and (if available) IPv6
+
+\b for a remote-to-local port forwarding, PuTTY will choose a
+sensible protocol for the outgoing connection.
+
+This overrides the general Internet protocol version preference
+on the Connection panel (see \k{config-address-family}).
+
+Note that some operating systems may listen for incoming connections
+in IPv4 even if you specifically asked for IPv6, because their IPv4
+and IPv6 protocol stacks are linked together. Apparently \i{Linux} does
+this, and Windows does not. So if you're running PuTTY on Windows
+and you tick \q{IPv6} for a local or dynamic port forwarding, it
+will \e{only} be usable by connecting to it using IPv6; whereas if
+you do the same on Linux, you can also use it with IPv4. However,
+ticking \q{Auto} should always give you a port which you can connect
+to using either protocol.
+
+\H{config-ssh-bugs} \I{SSH server bugs}The Bugs and More Bugs panels
+
+Not all SSH servers work properly. Various existing servers have
+bugs in them, which can make it impossible for a client to talk to
+them unless it knows about the bug and works around it.
+
+Since most servers announce their software version number at the
+beginning of the SSH connection, PuTTY will attempt to detect which
+bugs it can expect to see in the server and automatically enable
+workarounds. However, sometimes it will make mistakes; if the server
+has been deliberately configured to conceal its version number, or
+if the server is a version which PuTTY's bug database does not know
+about, then PuTTY will not know what bugs to expect.
+
+The Bugs and More Bugs panels (there are two because we have so many
+bug compatibility modes) allow you to manually configure the bugs
+PuTTY expects to see in the server. Each bug can be configured in
+three states:
+
+\b \q{Off}: PuTTY will assume the server does not have the bug.
+
+\b \q{On}: PuTTY will assume the server \e{does} have the bug.
+
+\b \q{Auto}: PuTTY will use the server's version number announcement
+to try to guess whether or not the server has the bug.
+
+\S{config-ssh-bug-ignore1} \q{Chokes on SSH-1 \i{ignore message}s}
+
+\cfg{winhelp-topic}{ssh.bugs.ignore1}
+
+An ignore message (SSH_MSG_IGNORE) is a message in the SSH protocol
+which can be sent from the client to the server, or from the server
+to the client, at any time. Either side is required to ignore the
+message whenever it receives it. PuTTY uses ignore messages to
+\I{password camouflage}hide the password packet in SSH-1, so that
+a listener cannot tell the length of the user's password; it also
+uses ignore messages for connection \i{keepalives} (see
+\k{config-keepalive}).
+
+If this bug is detected, PuTTY will stop using ignore messages. This
+means that keepalives will stop working, and PuTTY will have to fall
+back to a secondary defence against SSH-1 password-length
+eavesdropping. See \k{config-ssh-bug-plainpw1}. If this bug is
+enabled when talking to a correct server, the session will succeed,
+but keepalives will not work and the session might be more
+vulnerable to eavesdroppers than it could be.
+
+\S{config-ssh-bug-plainpw1} \q{Refuses all SSH-1 \i{password camouflage}}
+
+\cfg{winhelp-topic}{ssh.bugs.plainpw1}
+
+When talking to an SSH-1 server which cannot deal with ignore
+messages (see \k{config-ssh-bug-ignore1}), PuTTY will attempt to
+disguise the length of the user's password by sending additional
+padding \e{within} the password packet. This is technically a
+violation of the SSH-1 specification, and so PuTTY will only do it
+when it cannot use standards-compliant ignore messages as
+camouflage. In this sense, for a server to refuse to accept a padded
+password packet is not really a bug, but it does make life
+inconvenient if the server can also not handle ignore messages.
+
+If this \q{bug} is detected, PuTTY will assume that neither ignore
+messages nor padding are acceptable, and that it thus has no choice
+but to send the user's password with no form of camouflage, so that
+an eavesdropping user will be easily able to find out the exact length
+of the password. If this bug is enabled when talking to a correct
+server, the session will succeed, but will be more vulnerable to
+eavesdroppers than it could be.
+
+This is an SSH-1-specific bug. SSH-2 is secure against this type of
+attack.
+
+\S{config-ssh-bug-rsa1} \q{Chokes on SSH-1 \i{RSA} authentication}
+
+\cfg{winhelp-topic}{ssh.bugs.rsa1}
+
+Some SSH-1 servers cannot deal with RSA authentication messages at
+all. If \i{Pageant} is running and contains any SSH-1 keys, PuTTY will
+normally automatically try RSA authentication before falling back to
+passwords, so these servers will crash when they see the RSA attempt.
+
+If this bug is detected, PuTTY will go straight to password
+authentication. If this bug is enabled when talking to a correct
+server, the session will succeed, but of course RSA authentication
+will be impossible.
+
+This is an SSH-1-specific bug.
+
+\S{config-ssh-bug-ignore2} \q{Chokes on SSH-2 \i{ignore message}s}
+
+\cfg{winhelp-topic}{ssh.bugs.ignore2}
+
+An ignore message (SSH_MSG_IGNORE) is a message in the SSH protocol
+which can be sent from the client to the server, or from the server
+to the client, at any time. Either side is required to ignore the
+message whenever it receives it. PuTTY uses ignore messages in SSH-2
+to confuse the encrypted data stream and make it harder to
+cryptanalyse. It also uses ignore messages for connection
+\i{keepalives} (see \k{config-keepalive}).
+
+If it believes the server to have this bug, PuTTY will stop using
+ignore messages. If this bug is enabled when talking to a correct
+server, the session will succeed, but keepalives will not work and
+the session might be less cryptographically secure than it could be.
+
+\S{config-ssh-bug-winadj} \q{Chokes on PuTTY's SSH-2 \cq{winadj} requests}
+
+\cfg{winhelp-topic}{ssh.bugs.winadj}
+
+PuTTY sometimes sends a special request to SSH servers in the middle
+of channel data, with the name \cw{winadj@putty.projects.tartarus.org}
+(see \k{sshnames-channel}). The purpose of this request is to measure
+the round-trip time to the server, which PuTTY uses to tune its flow
+control. The server does not actually have to \e{understand} the
+message; it is expected to send back a \cw{SSH_MSG_CHANNEL_FAILURE}
+message indicating that it didn't understand it. (All PuTTY needs for
+its timing calculations is \e{some} kind of response.)
+
+It has been known for some SSH servers to get confused by this message
+in one way or another \dash because it has a long name, or because
+they can't cope with unrecognised request names even to the extent of
+sending back the correct failure response, or because they handle it
+sensibly but fill up the server's log file with pointless spam, or
+whatever. PuTTY therefore supports this bug-compatibility flag: if it
+believes the server has this bug, it will never send its
+\cq{winadj@putty.projects.tartarus.org} request, and will make do
+without its timing data.
+
+\S{config-ssh-bug-hmac2} \q{Miscomputes SSH-2 HMAC keys}
+
+\cfg{winhelp-topic}{ssh.bugs.hmac2}
+
+Versions 2.3.0 and below of the SSH server software from
+\cw{ssh.com} compute the keys for their \i{HMAC} \i{message authentication
+code}s incorrectly. A typical symptom of this problem is that PuTTY
+dies unexpectedly at the beginning of the session, saying
+\q{Incorrect MAC received on packet}.
+
+If this bug is detected, PuTTY will compute its HMAC keys in the
+same way as the buggy server, so that communication will still be
+possible. If this bug is enabled when talking to a correct server,
+communication will fail.
+
+This is an SSH-2-specific bug.
+
+\S{config-ssh-bug-derivekey2} \q{Miscomputes SSH-2 \i{encryption} keys}
+
+\cfg{winhelp-topic}{ssh.bugs.derivekey2}
+
+Versions below 2.0.11 of the SSH server software from \i\cw{ssh.com}
+compute the keys for the session encryption incorrectly. This
+problem can cause various error messages, such as \q{Incoming packet
+was garbled on decryption}, or possibly even \q{Out of memory}.
+
+If this bug is detected, PuTTY will compute its encryption keys in
+the same way as the buggy server, so that communication will still
+be possible. If this bug is enabled when talking to a correct
+server, communication will fail.
+
+This is an SSH-2-specific bug.
+
+\S{config-ssh-bug-sig} \q{Requires padding on SSH-2 \i{RSA} \i{signatures}}
+
+\cfg{winhelp-topic}{ssh.bugs.rsapad2}
+
+Versions below 3.3 of \i{OpenSSH} require SSH-2 RSA signatures to be
+padded with zero bytes to the same length as the RSA key modulus.
+The SSH-2 specification says that an unpadded signature MUST be
+accepted, so this is a bug. A typical symptom of this problem is
+that PuTTY mysteriously fails RSA authentication once in every few
+hundred attempts, and falls back to passwords.
+
+If this bug is detected, PuTTY will pad its signatures in the way
+OpenSSH expects. If this bug is enabled when talking to a correct
+server, it is likely that no damage will be done, since correct
+servers usually still accept padded signatures because they're used
+to talking to OpenSSH.
+
+This is an SSH-2-specific bug.
+
+\S{config-ssh-bug-pksessid2} \q{Misuses the \i{session ID} in SSH-2 PK auth}
+
+\cfg{winhelp-topic}{ssh.bugs.pksessid2}
+
+Versions below 2.3 of \i{OpenSSH} require SSH-2 \i{public-key authentication}
+to be done slightly differently: the data to be signed by the client
+contains the session ID formatted in a different way. If public-key
+authentication mysteriously does not work but the Event Log (see
+\k{using-eventlog}) thinks it has successfully sent a signature, it
+might be worth enabling the workaround for this bug to see if it
+helps.
+
+If this bug is detected, PuTTY will sign data in the way OpenSSH
+expects. If this bug is enabled when talking to a correct server,
+SSH-2 public-key authentication will fail.
+
+This is an SSH-2-specific bug.
+
+\S{config-ssh-bug-rekey} \q{Handles SSH-2 key re-exchange badly}
+
+\cfg{winhelp-topic}{ssh.bugs.rekey2}
+
+Some SSH servers cannot cope with \i{repeat key exchange} at
+all, and will ignore attempts by the client to start one. Since
+PuTTY pauses the session while performing a repeat key exchange, the
+effect of this would be to cause the session to hang after an hour
+(unless you have your rekey timeout set differently; see
+\k{config-ssh-kex-rekey} for more about rekeys).
+Other, very old, SSH servers handle repeat key exchange even more
+badly, and disconnect upon receiving a repeat key exchange request.
+
+If this bug is detected, PuTTY will never initiate a repeat key
+exchange. If this bug is enabled when talking to a correct server,
+the session should still function, but may be less secure than you
+would expect.
+
+This is an SSH-2-specific bug.
+
+\S{config-ssh-bug-maxpkt2} \q{Ignores SSH-2 \i{maximum packet size}}
+
+\cfg{winhelp-topic}{ssh.bugs.maxpkt2}
+
+When an SSH-2 channel is set up, each end announces the maximum size
+of data packet that it is willing to receive for that channel. Some
+servers ignore PuTTY's announcement and send packets larger than PuTTY
+is willing to accept, causing it to report \q{Incoming packet was
+garbled on decryption}.
+
+If this bug is detected, PuTTY never allows the channel's
+\i{flow-control window} to grow large enough to allow the server to
+send an over-sized packet. If this bug is enabled when talking to a
+correct server, the session will work correctly, but download
+performance will be less than it could be.
+
+\S{config-ssh-bug-chanreq} \q{Replies to requests on closed channels}
+
+\cfg{winhelp-topic}{ssh.bugs.chanreq}
+
+The SSH protocol as published in RFC 4254 has an ambiguity which
+arises if one side of a connection tries to close a channel, while the
+other side simultaneously sends a request within the channel and asks
+for a reply. RFC 4254 leaves it unclear whether the closing side
+should reply to the channel request after having announced its
+intention to close the channel.
+
+Discussion on the \cw{ietf-ssh} mailing list in April 2014 formed a
+clear consensus that the right answer is no. However, because of the
+ambiguity in the specification, some SSH servers have implemented the
+other policy; for example,
+\W{https://bugzilla.mindrot.org/show_bug.cgi?id=1818}{OpenSSH used to}
+until it was fixed.
+
+Because PuTTY sends channel requests with the \q{want reply} flag
+throughout channels' lifetime (see \k{config-ssh-bug-winadj}), it's
+possible that when connecting to such a server it might receive a
+reply to a request after it thinks the channel has entirely closed,
+and terminate with an error along the lines of \q{Received
+\cw{SSH2_MSG_CHANNEL_FAILURE} for nonexistent channel 256}.
+
+\S{config-ssh-bug-oldgex2} \q{Only supports pre-RFC4419 SSH-2 DH GEX}
+
+\cfg{winhelp-topic}{ssh.bugs.oldgex2}
+
+The SSH key exchange method that uses Diffie-Hellman group exchange
+was redesigned after its original release, to use a slightly more
+sophisticated setup message. Almost all SSH implementations switched
+over to the new version. (PuTTY was one of the last.) A few old
+servers still only support the old one.
+
+If this bug is detected, and the client and server negotiate
+Diffie-Hellman group exchange, then PuTTY will send the old message
+now known as \cw{SSH2_MSG_KEX_DH_GEX_REQUEST_OLD} in place of the new
+\cw{SSH2_MSG_KEX_DH_GEX_REQUEST}.
+
+This is an SSH-2-specific bug.
+
+\H{config-serial} The Serial panel
+
+The \i{Serial} panel allows you to configure options that only apply
+when PuTTY is connecting to a local \I{serial port}\i{serial line}.
+
+\S{config-serial-line} Selecting a serial line to connect to
+
+\cfg{winhelp-topic}{serial.line}
+
+The \q{Serial line to connect to} box allows you to choose which
+serial line you want PuTTY to talk to, if your computer has more
+than one serial port.
+
+On Windows, the first serial line is called \i\cw{COM1}, and if there
+is a second it is called \cw{COM2}, and so on.
+
+This configuration setting is also visible on the Session panel,
+where it replaces the \q{Host Name} box (see \k{config-hostname}) if
+the connection type is set to \q{Serial}.
+
+\S{config-serial-speed} Selecting the speed of your serial line
+
+\cfg{winhelp-topic}{serial.speed}
+
+The \q{Speed} box allows you to choose the speed (or \q{baud rate})
+at which to talk to the serial line. Typical values might be 9600,
+19200, 38400 or 57600. Which one you need will depend on the device
+at the other end of the serial cable; consult the manual for that
+device if you are in doubt.
+
+This configuration setting is also visible on the Session panel,
+where it replaces the \q{Port} box (see \k{config-hostname}) if the
+connection type is set to \q{Serial}.
+
+\S{config-serial-databits} Selecting the number of data bits
+
+\cfg{winhelp-topic}{serial.databits}
+
+The \q{Data bits} box allows you to choose how many data bits are
+transmitted in each byte sent or received through the serial line.
+Typical values are 7 or 8.
+
+\S{config-serial-stopbits} Selecting the number of stop bits
+
+\cfg{winhelp-topic}{serial.stopbits}
+
+The \q{Stop bits} box allows you to choose how many stop bits are
+used in the serial line protocol. Typical values are 1, 1.5 or 2.
+
+\S{config-serial-parity} Selecting the serial parity checking scheme
+
+\cfg{winhelp-topic}{serial.parity}
+
+The \q{Parity} box allows you to choose what type of parity checking
+is used on the serial line. The settings are:
+
+\b \q{None}: no parity bit is sent at all.
+
+\b \q{Odd}: an extra parity bit is sent alongside each byte, and
+arranged so that the total number of 1 bits is odd.
+
+\b \q{Even}: an extra parity bit is sent alongside each byte, and
+arranged so that the total number of 1 bits is even.
+
+\b \q{Mark}: an extra parity bit is sent alongside each byte, and
+always set to 1.
+
+\b \q{Space}: an extra parity bit is sent alongside each byte, and
+always set to 0.
+
+\S{config-serial-flow} Selecting the serial flow control scheme
+
+\cfg{winhelp-topic}{serial.flow}
+
+The \q{Flow control} box allows you to choose what type of flow
+control checking is used on the serial line. The settings are:
+
+\b \q{None}: no flow control is done. Data may be lost if either
+side attempts to send faster than the serial line permits.
+
+\b \q{XON/XOFF}: flow control is done by sending XON and XOFF
+characters within the data stream.
+
+\b \q{RTS/CTS}: flow control is done using the RTS and CTS wires on
+the serial line.
+
+\b \q{DSR/DTR}: flow control is done using the DSR and DTR wires on
+the serial line.
+
+\H{config-file} \ii{Storing configuration in a file}
PuTTY does not currently support storing its configuration in a file
-instead of the Registry. However, you can work around this with a
-couple of batch files.
+instead of the \i{Registry}. However, you can work around this with a
+couple of \i{batch file}s.
You will need a file called (say) \c{PUTTY.BAT} which imports the
contents of a file into the Registry, then runs PuTTY, exports the
\c regedit /s putty.reg
\c regedit /s puttyrnd.reg
\c start /w putty.exe
-\c regedit /e puttynew.reg HKEY_CURRENT_USER\Software\SimonTatham\PuTTY
-\c copy puttynew.reg putty.reg
-\c del puttynew.reg
+\c regedit /ea new.reg HKEY_CURRENT_USER\Software\SimonTatham\PuTTY
+\c copy new.reg putty.reg
+\c del new.reg
\c regedit /s puttydel.reg
This batch file needs two auxiliary files: \c{PUTTYRND.REG} which
\c REGEDIT4
\c
\c [HKEY_CURRENT_USER\Software\SimonTatham\PuTTY]
-\c "RandSeedFile"="a:\putty.rnd"
+\c "RandSeedFile"="a:\\putty.rnd"
You should replace \c{a:\\putty.rnd} with the location where you
want to store your random number data. If the aim is to carry around
-PuTTY and its settings on one floppy, you probably want to store it
-on the floppy.
+PuTTY and its settings on one USB stick, you probably want to store it
+on the USB stick.