drm/amd/display: define DC_LOGGER for logger

[linux.git] / drivers / gpu / drm / amd / display / dc / dce110 / dce110_hw_sequencer.c

diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 9e31f06ab4c820bc28f5ee7efbbb8675e0697e6e..f21aa04e93da008e0837c47b0c7a2183a0f9ea07 100644 (file)
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -70,6 +70,8 @@
 
 #define CTX \
        hws->ctx
+#define DC_LOGGER \
+       ctx->logger
 #define REG(reg)\
        hws->regs->reg
 
@@ -816,7 +818,7 @@ void hwss_edp_wait_for_hpd_ready(
        dal_gpio_destroy_irq(&hpd);
 
        if (false == edp_hpd_high) {
-               DC_LOG_ERROR(ctx->logger,
+               DC_LOG_ERROR(
                                "%s: wait timed out!\n", __func__);
        }
 }
@@ -840,7 +842,7 @@ void hwss_edp_power_control(
        if (power_up != is_panel_powered_on(hwseq)) {
                /* Send VBIOS command to prompt eDP panel power */
 
-               DC_LOG_HW_RESUME_S3(ctx->logger,
+               DC_LOG_HW_RESUME_S3(
                                "%s: Panel Power action: %s\n",
                                __func__, (power_up ? "On":"Off"));
 
@@ -856,11 +858,11 @@ void hwss_edp_power_control(
                bp_result = link_transmitter_control(ctx->dc_bios, &cntl);
 
                if (bp_result != BP_RESULT_OK)
-                       DC_LOG_ERROR(ctx->logger,
+                       DC_LOG_ERROR(
                                        "%s: Panel Power bp_result: %d\n",
                                        __func__, bp_result);
        } else {
-               DC_LOG_HW_RESUME_S3(ctx->logger,
+               DC_LOG_HW_RESUME_S3(
                                "%s: Skipping Panel Power action: %s\n",
                                __func__, (power_up ? "On":"Off"));
        }
@@ -886,7 +888,7 @@ void hwss_edp_backlight_control(
        }
 
        if (enable && is_panel_backlight_on(hws)) {
-               DC_LOG_HW_RESUME_S3(ctx->logger,
+               DC_LOG_HW_RESUME_S3(
                                "%s: panel already powered up. Do nothing.\n",
                                __func__);
                return;
@@ -894,7 +896,7 @@ void hwss_edp_backlight_control(
 
        /* Send VBIOS command to control eDP panel backlight */
 
-       DC_LOG_HW_RESUME_S3(ctx->logger,
+       DC_LOG_HW_RESUME_S3(
                        "%s: backlight action: %s\n",
                        __func__, (enable ? "On":"Off"));
 
@@ -2687,7 +2689,7 @@ static void dce110_program_front_end_for_pipe(
        struct xfm_grph_csc_adjustment adjust;
        struct out_csc_color_matrix tbl_entry;
        unsigned int i;
-
+       struct dc_context *ctx = dc->ctx;
        memset(&tbl_entry, 0, sizeof(tbl_entry));
 
        if (dc->current_state)
@@ -2762,7 +2764,7 @@ static void dce110_program_front_end_for_pipe(
        if (pipe_ctx->plane_state->update_flags.bits.full_update)
                dc->hwss.set_output_transfer_func(pipe_ctx, pipe_ctx->stream);
 
-       DC_LOG_SURFACE(dc->ctx->logger,
+       DC_LOG_SURFACE(
                        "Pipe:%d 0x%x: addr hi:0x%x, "
                        "addr low:0x%x, "
                        "src: %d, %d, %d,"
@@ -2785,7 +2787,7 @@ static void dce110_program_front_end_for_pipe(
                        pipe_ctx->plane_state->clip_rect.width,
                        pipe_ctx->plane_state->clip_rect.height);
 
-       DC_LOG_SURFACE(dc->ctx->logger,
+       DC_LOG_SURFACE(
                        "Pipe %d: width, height, x, y\n"
                        "viewport:%d, %d, %d, %d\n"
                        "recout:  %d, %d, %d, %d\n",