static int drm_dp_send_link_address(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb);
+
+static void
+drm_dp_send_clear_payload_id_table(struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_mst_branch *mstb);
+
static int drm_dp_send_enum_path_resources(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb,
struct drm_dp_mst_port *port);
}
if (failed) {
- for (i = 0; i < r->num_transactions; i++)
+ for (i = 0; i < r->num_transactions; i++) {
+ tx = &r->transactions[i];
kfree(tx->bytes);
+ }
return -ENOMEM;
}
{
int idx = 1;
repmsg->u.path_resources.port_number = (raw->msg[idx] >> 4) & 0xf;
+ repmsg->u.path_resources.fec_capable = raw->msg[idx] & 0x1;
idx++;
if (idx > raw->curlen)
goto fail_len;
case DP_POWER_DOWN_PHY:
case DP_POWER_UP_PHY:
return drm_dp_sideband_parse_power_updown_phy_ack(raw, msg);
+ case DP_CLEAR_PAYLOAD_ID_TABLE:
+ return true; /* since there's nothing to parse */
default:
DRM_ERROR("Got unknown reply 0x%02x (%s)\n", msg->req_type,
drm_dp_mst_req_type_str(msg->req_type));
return 0;
}
+static int build_clear_payload_id_table(struct drm_dp_sideband_msg_tx *msg)
+{
+ struct drm_dp_sideband_msg_req_body req;
+
+ req.req_type = DP_CLEAR_PAYLOAD_ID_TABLE;
+ drm_dp_encode_sideband_req(&req, msg);
+ return 0;
+}
+
static int build_enum_path_resources(struct drm_dp_sideband_msg_tx *msg, int port_num)
{
struct drm_dp_sideband_msg_req_body req;
struct drm_dp_mst_port *port)
{
mutex_lock(&mgr->lock);
+ port->parent->num_ports--;
list_del(&port->next);
mutex_unlock(&mgr->lock);
drm_dp_mst_topology_put_port(port);
mutex_lock(&mgr->lock);
drm_dp_mst_topology_get_port(port);
list_add(&port->next, &mstb->ports);
+ mstb->num_ports++;
mutex_unlock(&mgr->lock);
}
struct drm_device *dev = mgr->dev;
struct drm_dp_mst_branch *mstb;
int ret;
+ bool clear_payload_id_table;
mutex_lock(&mgr->probe_lock);
mutex_lock(&mgr->lock);
+ clear_payload_id_table = !mgr->payload_id_table_cleared;
+ mgr->payload_id_table_cleared = true;
+
mstb = mgr->mst_primary;
if (mstb) {
ret = drm_dp_mst_topology_try_get_mstb(mstb);
return;
}
+ /*
+ * Certain branch devices seem to incorrectly report an available_pbn
+ * of 0 on downstream sinks, even after clearing the
+ * DP_PAYLOAD_ALLOCATE_* registers in
+ * drm_dp_mst_topology_mgr_set_mst(). Namely, the CableMatters USB-C
+ * 2x DP hub. Sending a CLEAR_PAYLOAD_ID_TABLE message seems to make
+ * things work again.
+ */
+ if (clear_payload_id_table) {
+ DRM_DEBUG_KMS("Clearing payload ID table\n");
+ drm_dp_send_clear_payload_id_table(mgr, mstb);
+ }
+
ret = drm_dp_check_and_send_link_address(mgr, mstb);
drm_dp_mst_topology_put_mstb(mstb);
return ret < 0 ? ret : changed;
}
+void drm_dp_send_clear_payload_id_table(struct drm_dp_mst_topology_mgr *mgr,
+ struct drm_dp_mst_branch *mstb)
+{
+ struct drm_dp_sideband_msg_tx *txmsg;
+ int len, ret;
+
+ txmsg = kzalloc(sizeof(*txmsg), GFP_KERNEL);
+ if (!txmsg)
+ return;
+
+ txmsg->dst = mstb;
+ len = build_clear_payload_id_table(txmsg);
+
+ drm_dp_queue_down_tx(mgr, txmsg);
+
+ ret = drm_dp_mst_wait_tx_reply(mstb, txmsg);
+ if (ret > 0 && txmsg->reply.reply_type == DP_SIDEBAND_REPLY_NAK)
+ DRM_DEBUG_KMS("clear payload table id nak received\n");
+
+ kfree(txmsg);
+}
+
static int
drm_dp_send_enum_path_resources(struct drm_dp_mst_topology_mgr *mgr,
struct drm_dp_mst_branch *mstb,
path_res->avail_payload_bw_number);
port->available_pbn =
path_res->avail_payload_bw_number;
+ port->fec_capable = path_res->fec_capable;
}
}
int drm_dp_mst_topology_mgr_set_mst(struct drm_dp_mst_topology_mgr *mgr, bool mst_state)
{
int ret = 0;
+ int i = 0;
struct drm_dp_mst_branch *mstb = NULL;
mutex_lock(&mgr->lock);
/* this can fail if the device is gone */
drm_dp_dpcd_writeb(mgr->aux, DP_MSTM_CTRL, 0);
ret = 0;
+ mutex_lock(&mgr->payload_lock);
memset(mgr->payloads, 0, mgr->max_payloads * sizeof(struct drm_dp_payload));
mgr->payload_mask = 0;
set_bit(0, &mgr->payload_mask);
+ for (i = 0; i < mgr->max_payloads; i++) {
+ struct drm_dp_vcpi *vcpi = mgr->proposed_vcpis[i];
+
+ if (vcpi) {
+ vcpi->vcpi = 0;
+ vcpi->num_slots = 0;
+ }
+ mgr->proposed_vcpis[i] = NULL;
+ }
mgr->vcpi_mask = 0;
+ mutex_unlock(&mgr->payload_lock);
+
+ mgr->payload_id_table_cleared = false;
}
out_unlock:
* drm_dp_calc_pbn_mode() - Calculate the PBN for a mode.
* @clock: dot clock for the mode
* @bpp: bpp for the mode.
+ * @dsc: DSC mode. If true, bpp has units of 1/16 of a bit per pixel
*
* This uses the formula in the spec to calculate the PBN value for a mode.
*/
-int drm_dp_calc_pbn_mode(int clock, int bpp)
+int drm_dp_calc_pbn_mode(int clock, int bpp, bool dsc)
{
/*
* margin 5300ppm + 300ppm ~ 0.6% as per spec, factor is 1.006
* peak_kbps *= (1006/1000)
* peak_kbps *= (64/54)
* peak_kbps *= 8 convert to bytes
+ *
+ * If the bpp is in units of 1/16, further divide by 16. Put this
+ * factor in the numerator rather than the denominator to avoid
+ * integer overflow
*/
+
+ if (dsc)
+ return DIV_ROUND_UP_ULL(mul_u32_u32(clock * (bpp / 16), 64 * 1006),
+ 8 * 54 * 1000 * 1000);
+
return DIV_ROUND_UP_ULL(mul_u32_u32(clock * bpp, 64 * 1006),
8 * 54 * 1000 * 1000);
}
{
i2c_del_adapter(&aux->ddc);
}
+
+/**
+ * drm_dp_mst_is_virtual_dpcd() - Is the given port a virtual DP Peer Device
+ * @port: The port to check
+ *
+ * A single physical MST hub object can be represented in the topology
+ * by multiple branches, with virtual ports between those branches.
+ *
+ * As of DP1.4, An MST hub with internal (virtual) ports must expose
+ * certain DPCD registers over those ports. See sections 2.6.1.1.1
+ * and 2.6.1.1.2 of Display Port specification v1.4 for details.
+ *
+ * May acquire mgr->lock
+ *
+ * Returns:
+ * true if the port is a virtual DP peer device, false otherwise
+ */
+static bool drm_dp_mst_is_virtual_dpcd(struct drm_dp_mst_port *port)
+{
+ struct drm_dp_mst_port *downstream_port;
+
+ if (!port || port->dpcd_rev < DP_DPCD_REV_14)
+ return false;
+
+ /* Virtual DP Sink (Internal Display Panel) */
+ if (port->port_num >= 8)
+ return true;
+
+ /* DP-to-HDMI Protocol Converter */
+ if (port->pdt == DP_PEER_DEVICE_DP_LEGACY_CONV &&
+ !port->mcs &&
+ port->ldps)
+ return true;
+
+ /* DP-to-DP */
+ mutex_lock(&port->mgr->lock);
+ if (port->pdt == DP_PEER_DEVICE_MST_BRANCHING &&
+ port->mstb &&
+ port->mstb->num_ports == 2) {
+ list_for_each_entry(downstream_port, &port->mstb->ports, next) {
+ if (downstream_port->pdt == DP_PEER_DEVICE_SST_SINK &&
+ !downstream_port->input) {
+ mutex_unlock(&port->mgr->lock);
+ return true;
+ }
+ }
+ }
+ mutex_unlock(&port->mgr->lock);
+
+ return false;
+}
+
+/**
+ * drm_dp_mst_dsc_aux_for_port() - Find the correct aux for DSC
+ * @port: The port to check. A leaf of the MST tree with an attached display.
+ *
+ * Depending on the situation, DSC may be enabled via the endpoint aux,
+ * the immediately upstream aux, or the connector's physical aux.
+ *
+ * This is both the correct aux to read DSC_CAPABILITY and the
+ * correct aux to write DSC_ENABLED.
+ *
+ * This operation can be expensive (up to four aux reads), so
+ * the caller should cache the return.
+ *
+ * Returns:
+ * NULL if DSC cannot be enabled on this port, otherwise the aux device
+ */
+struct drm_dp_aux *drm_dp_mst_dsc_aux_for_port(struct drm_dp_mst_port *port)
+{
+ struct drm_dp_mst_port *immediate_upstream_port;
+ struct drm_dp_mst_port *fec_port;
+ struct drm_dp_desc desc = { 0 };
+ u8 endpoint_fec;
+ u8 endpoint_dsc;
+
+ if (!port)
+ return NULL;
+
+ if (port->parent->port_parent)
+ immediate_upstream_port = port->parent->port_parent;
+ else
+ immediate_upstream_port = NULL;
+
+ fec_port = immediate_upstream_port;
+ while (fec_port) {
+ /*
+ * Each physical link (i.e. not a virtual port) between the
+ * output and the primary device must support FEC
+ */
+ if (!drm_dp_mst_is_virtual_dpcd(fec_port) &&
+ !fec_port->fec_capable)
+ return NULL;
+
+ fec_port = fec_port->parent->port_parent;
+ }
+
+ /* DP-to-DP peer device */
+ if (drm_dp_mst_is_virtual_dpcd(immediate_upstream_port)) {
+ u8 upstream_dsc;
+
+ if (drm_dp_dpcd_read(&port->aux,
+ DP_DSC_SUPPORT, &endpoint_dsc, 1) != 1)
+ return NULL;
+ if (drm_dp_dpcd_read(&port->aux,
+ DP_FEC_CAPABILITY, &endpoint_fec, 1) != 1)
+ return NULL;
+ if (drm_dp_dpcd_read(&immediate_upstream_port->aux,
+ DP_DSC_SUPPORT, &upstream_dsc, 1) != 1)
+ return NULL;
+
+ /* Enpoint decompression with DP-to-DP peer device */
+ if ((endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED) &&
+ (endpoint_fec & DP_FEC_CAPABLE) &&
+ (upstream_dsc & 0x2) /* DSC passthrough */)
+ return &port->aux;
+
+ /* Virtual DPCD decompression with DP-to-DP peer device */
+ return &immediate_upstream_port->aux;
+ }
+
+ /* Virtual DPCD decompression with DP-to-HDMI or Virtual DP Sink */
+ if (drm_dp_mst_is_virtual_dpcd(port))
+ return &port->aux;
+
+ /*
+ * Synaptics quirk
+ * Applies to ports for which:
+ * - Physical aux has Synaptics OUI
+ * - DPv1.4 or higher
+ * - Port is on primary branch device
+ * - Not a VGA adapter (DP_DWN_STRM_PORT_TYPE_ANALOG)
+ */
+ if (drm_dp_read_desc(port->mgr->aux, &desc, true))
+ return NULL;
+
+ if (drm_dp_has_quirk(&desc, DP_DPCD_QUIRK_DSC_WITHOUT_VIRTUAL_DPCD) &&
+ port->mgr->dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14 &&
+ port->parent == port->mgr->mst_primary) {
+ u8 downstreamport;
+
+ if (drm_dp_dpcd_read(&port->aux, DP_DOWNSTREAMPORT_PRESENT,
+ &downstreamport, 1) < 0)
+ return NULL;
+
+ if ((downstreamport & DP_DWN_STRM_PORT_PRESENT) &&
+ ((downstreamport & DP_DWN_STRM_PORT_TYPE_MASK)
+ != DP_DWN_STRM_PORT_TYPE_ANALOG))
+ return port->mgr->aux;
+ }
+
+ /*
+ * The check below verifies if the MST sink
+ * connected to the GPU is capable of DSC -
+ * therefore the endpoint needs to be
+ * both DSC and FEC capable.
+ */
+ if (drm_dp_dpcd_read(&port->aux,
+ DP_DSC_SUPPORT, &endpoint_dsc, 1) != 1)
+ return NULL;
+ if (drm_dp_dpcd_read(&port->aux,
+ DP_FEC_CAPABILITY, &endpoint_fec, 1) != 1)
+ return NULL;
+ if ((endpoint_dsc & DP_DSC_DECOMPRESSION_IS_SUPPORTED) &&
+ (endpoint_fec & DP_FEC_CAPABLE))
+ return &port->aux;
+
+ return NULL;
+}
+EXPORT_SYMBOL(drm_dp_mst_dsc_aux_for_port);