#include <linux/regulator/consumer.h>
#include <linux/mutex.h>
#include <linux/bitops.h>
+#include <linux/of.h>
/* Addresses to scan
* The chip also supports addresses 0x35..0x37. Don't scan those addresses
#define ADC128_REG_MAN_ID 0x3e
#define ADC128_REG_DEV_ID 0x3f
+/* No. of voltage entries in adc128_attrs */
+#define ADC128_ATTR_NUM_VOLT (8 * 4)
+
+/* Voltage inputs visible per operation mode */
+static const u8 num_inputs[] = { 7, 8, 4, 6 };
+
struct adc128_data {
struct i2c_client *client;
struct regulator *regulator;
int vref; /* Reference voltage in mV */
struct mutex update_lock;
+ u8 mode; /* Operation mode */
bool valid; /* true if following fields are valid */
unsigned long last_updated; /* In jiffies */
- u16 in[3][7]; /* Register value, normalized to 12 bit
+ u16 in[3][8]; /* Register value, normalized to 12 bit
* 0: input voltage
* 1: min limit
* 2: max limit
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
- for (i = 0; i < 7; i++) {
+ for (i = 0; i < num_inputs[data->mode]; i++) {
rv = i2c_smbus_read_word_swapped(client,
ADC128_REG_IN(i));
if (rv < 0)
data->in[2][i] = rv << 4;
}
- rv = i2c_smbus_read_word_swapped(client, ADC128_REG_TEMP);
- if (rv < 0)
- goto abort;
- data->temp[0] = rv >> 7;
+ if (data->mode != 1) {
+ rv = i2c_smbus_read_word_swapped(client,
+ ADC128_REG_TEMP);
+ if (rv < 0)
+ goto abort;
+ data->temp[0] = rv >> 7;
- rv = i2c_smbus_read_byte_data(client, ADC128_REG_TEMP_MAX);
- if (rv < 0)
- goto abort;
- data->temp[1] = rv << 1;
+ rv = i2c_smbus_read_byte_data(client,
+ ADC128_REG_TEMP_MAX);
+ if (rv < 0)
+ goto abort;
+ data->temp[1] = rv << 1;
- rv = i2c_smbus_read_byte_data(client, ADC128_REG_TEMP_HYST);
- if (rv < 0)
- goto abort;
- data->temp[2] = rv << 1;
+ rv = i2c_smbus_read_byte_data(client,
+ ADC128_REG_TEMP_HYST);
+ if (rv < 0)
+ goto abort;
+ data->temp[2] = rv << 1;
+ }
rv = i2c_smbus_read_byte_data(client, ADC128_REG_ALARM);
if (rv < 0)
return sprintf(buf, "%u\n", !!(alarms & mask));
}
+static umode_t adc128_is_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct adc128_data *data = dev_get_drvdata(dev);
+
+ if (index < ADC128_ATTR_NUM_VOLT) {
+ /* Voltage, visible according to num_inputs[] */
+ if (index >= num_inputs[data->mode] * 4)
+ return 0;
+ } else {
+ /* Temperature, visible if not in mode 1 */
+ if (data->mode == 1)
+ return 0;
+ }
+
+ return attr->mode;
+}
+
static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO,
adc128_show_in, NULL, 0, 0);
static SENSOR_DEVICE_ATTR_2(in0_min, S_IWUSR | S_IRUGO,
static SENSOR_DEVICE_ATTR_2(in6_max, S_IWUSR | S_IRUGO,
adc128_show_in, adc128_set_in, 6, 2);
+static SENSOR_DEVICE_ATTR_2(in7_input, S_IRUGO,
+ adc128_show_in, NULL, 7, 0);
+static SENSOR_DEVICE_ATTR_2(in7_min, S_IWUSR | S_IRUGO,
+ adc128_show_in, adc128_set_in, 7, 1);
+static SENSOR_DEVICE_ATTR_2(in7_max, S_IWUSR | S_IRUGO,
+ adc128_show_in, adc128_set_in, 7, 2);
+
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, adc128_show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO,
adc128_show_temp, adc128_set_temp, 1);
static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, adc128_show_alarm, NULL, 4);
static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, adc128_show_alarm, NULL, 5);
static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, adc128_show_alarm, NULL, 6);
+static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, adc128_show_alarm, NULL, 7);
static SENSOR_DEVICE_ATTR(temp1_max_alarm, S_IRUGO, adc128_show_alarm, NULL, 7);
static struct attribute *adc128_attrs[] = {
- &sensor_dev_attr_in0_min.dev_attr.attr,
- &sensor_dev_attr_in1_min.dev_attr.attr,
- &sensor_dev_attr_in2_min.dev_attr.attr,
- &sensor_dev_attr_in3_min.dev_attr.attr,
- &sensor_dev_attr_in4_min.dev_attr.attr,
- &sensor_dev_attr_in5_min.dev_attr.attr,
- &sensor_dev_attr_in6_min.dev_attr.attr,
- &sensor_dev_attr_in0_max.dev_attr.attr,
- &sensor_dev_attr_in1_max.dev_attr.attr,
- &sensor_dev_attr_in2_max.dev_attr.attr,
- &sensor_dev_attr_in3_max.dev_attr.attr,
- &sensor_dev_attr_in4_max.dev_attr.attr,
- &sensor_dev_attr_in5_max.dev_attr.attr,
- &sensor_dev_attr_in6_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
&sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in1_alarm.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
+ &sensor_dev_attr_in1_max.dev_attr.attr,
+ &sensor_dev_attr_in1_min.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
&sensor_dev_attr_in4_input.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in5_alarm.dev_attr.attr,
&sensor_dev_attr_in5_input.dev_attr.attr,
+ &sensor_dev_attr_in5_max.dev_attr.attr,
+ &sensor_dev_attr_in5_min.dev_attr.attr,
+ &sensor_dev_attr_in6_alarm.dev_attr.attr,
&sensor_dev_attr_in6_input.dev_attr.attr,
+ &sensor_dev_attr_in6_max.dev_attr.attr,
+ &sensor_dev_attr_in6_min.dev_attr.attr,
+ &sensor_dev_attr_in7_alarm.dev_attr.attr,
+ &sensor_dev_attr_in7_input.dev_attr.attr,
+ &sensor_dev_attr_in7_max.dev_attr.attr,
+ &sensor_dev_attr_in7_min.dev_attr.attr,
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
- &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
- &sensor_dev_attr_in0_alarm.dev_attr.attr,
- &sensor_dev_attr_in1_alarm.dev_attr.attr,
- &sensor_dev_attr_in2_alarm.dev_attr.attr,
- &sensor_dev_attr_in3_alarm.dev_attr.attr,
- &sensor_dev_attr_in4_alarm.dev_attr.attr,
- &sensor_dev_attr_in5_alarm.dev_attr.attr,
- &sensor_dev_attr_in6_alarm.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
NULL
};
-ATTRIBUTE_GROUPS(adc128);
+
+static struct attribute_group adc128_group = {
+ .attrs = adc128_attrs,
+ .is_visible = adc128_is_visible,
+};
+__ATTRIBUTE_GROUPS(adc128);
static int adc128_detect(struct i2c_client *client, struct i2c_board_info *info)
{
if (err)
return err;
+ /* Set operation mode, if non-default */
+ if (data->mode != 0) {
+ err = i2c_smbus_write_byte_data(client,
+ ADC128_REG_CONFIG_ADV,
+ data->mode << 1);
+ if (err)
+ return err;
+ }
+
/* Start monitoring */
err = i2c_smbus_write_byte_data(client, ADC128_REG_CONFIG, 0x01);
if (err)
data->vref = 2560; /* 2.56V, in mV */
}
+ /* Operation mode is optional. If unspecified, keep current mode */
+ if (of_property_read_u8(dev->of_node, "ti,mode", &data->mode) == 0) {
+ if (data->mode > 3) {
+ dev_err(dev, "invalid operation mode %d\n",
+ data->mode);
+ err = -EINVAL;
+ goto error;
+ }
+ } else {
+ err = i2c_smbus_read_byte_data(client, ADC128_REG_CONFIG_ADV);
+ if (err < 0)
+ goto error;
+ data->mode = (err >> 1) & ADC128_REG_MASK;
+ }
+
data->client = client;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
projects / linux.git / blobdiff