// SPDX-License-Identifier: GPL-2.0
/*
- * Device driver for the via-pmu on Apple Powermacs.
+ * Device driver for the PMU in Apple PowerBooks and PowerMacs.
*
* The VIA (versatile interface adapter) interfaces to the PMU,
* a 6805 microprocessor core whose primary function is to control
#include <linux/compat.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
-#include <asm/prom.h>
+#include <linux/uaccess.h>
#include <asm/machdep.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/sections.h>
#include <asm/irq.h>
+#ifdef CONFIG_PPC_PMAC
#include <asm/pmac_feature.h>
#include <asm/pmac_pfunc.h>
#include <asm/pmac_low_i2c.h>
-#include <linux/uaccess.h>
+#include <asm/prom.h>
#include <asm/mmu_context.h>
#include <asm/cputable.h>
#include <asm/time.h>
#include <asm/backlight.h>
+#else
+#include <asm/macintosh.h>
+#include <asm/macints.h>
+#include <asm/mac_via.h>
+#endif
#include "via-pmu-event.h"
#define BATTERY_POLLING_COUNT 2
static DEFINE_MUTEX(pmu_info_proc_mutex);
-static volatile unsigned char __iomem *via;
/* VIA registers - spaced 0x200 bytes apart */
#define RS 0x200 /* skip between registers */
#define ANH (15*RS) /* A-side data, no handshake */
/* Bits in B data register: both active low */
+#ifdef CONFIG_PPC_PMAC
#define TACK 0x08 /* Transfer acknowledge (input) */
#define TREQ 0x10 /* Transfer request (output) */
+#else
+#define TACK 0x02
+#define TREQ 0x04
+#endif
/* Bits in ACR */
#define SR_CTRL 0x1c /* Shift register control bits */
#define CB1_INT 0x10 /* transition on CB1 input */
static volatile enum pmu_state {
+ uninitialized = 0,
idle,
sending,
intack,
static int data_len;
static volatile int adb_int_pending;
static volatile int disable_poll;
-static struct device_node *vias;
static int pmu_kind = PMU_UNKNOWN;
static int pmu_fully_inited;
static int pmu_has_adb;
+#ifdef CONFIG_PPC_PMAC
+static volatile unsigned char __iomem *via1;
+static volatile unsigned char __iomem *via2;
+static struct device_node *vias;
static struct device_node *gpio_node;
+#endif
static unsigned char __iomem *gpio_reg;
static int gpio_irq = 0;
static int gpio_irq_enabled = -1;
static int option_lid_wakeup = 1;
#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
static unsigned long async_req_locks;
-static unsigned int pmu_irq_stats[11];
+
+#define NUM_IRQ_STATS 13
+static unsigned int pmu_irq_stats[NUM_IRQ_STATS];
static struct proc_dir_entry *proc_pmu_root;
static struct proc_dir_entry *proc_pmu_info;
int __init find_via_pmu(void)
{
+#ifdef CONFIG_PPC_PMAC
u64 taddr;
const u32 *reg;
- if (via)
+ if (pmu_state != uninitialized)
return 1;
vias = of_find_node_by_name(NULL, "via-pmu");
if (vias == NULL)
} else
pmu_kind = PMU_UNKNOWN;
- via = ioremap(taddr, 0x2000);
- if (via == NULL) {
+ via1 = via2 = ioremap(taddr, 0x2000);
+ if (via1 == NULL) {
printk(KERN_ERR "via-pmu: Can't map address !\n");
goto fail_via_remap;
}
- out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
- out_8(&via[IFR], 0x7f); /* clear IFR */
+ out_8(&via1[IER], IER_CLR | 0x7f); /* disable all intrs */
+ out_8(&via1[IFR], 0x7f); /* clear IFR */
pmu_state = idle;
if (!init_pmu())
goto fail_init;
- printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
- PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
-
sys_ctrler = SYS_CTRLER_PMU;
return 1;
fail_init:
- iounmap(via);
- via = NULL;
+ iounmap(via1);
+ via1 = via2 = NULL;
fail_via_remap:
iounmap(gpio_reg);
gpio_reg = NULL;
fail:
of_node_put(vias);
vias = NULL;
+ pmu_state = uninitialized;
return 0;
+#else
+ if (macintosh_config->adb_type != MAC_ADB_PB2)
+ return 0;
+
+ pmu_kind = PMU_UNKNOWN;
+
+ spin_lock_init(&pmu_lock);
+
+ pmu_has_adb = 1;
+
+ pmu_intr_mask = PMU_INT_PCEJECT |
+ PMU_INT_SNDBRT |
+ PMU_INT_ADB |
+ PMU_INT_TICK;
+
+ pmu_state = idle;
+
+ if (!init_pmu()) {
+ pmu_state = uninitialized;
+ return 0;
+ }
+
+ return 1;
+#endif /* !CONFIG_PPC_PMAC */
}
#ifdef CONFIG_ADB
static int pmu_probe(void)
{
- return vias == NULL? -ENODEV: 0;
+ return pmu_state == uninitialized ? -ENODEV : 0;
}
-static int __init pmu_init(void)
+static int pmu_init(void)
{
- if (vias == NULL)
- return -ENODEV;
- return 0;
+ return pmu_state == uninitialized ? -ENODEV : 0;
}
#endif /* CONFIG_ADB */
*/
static int __init via_pmu_start(void)
{
- unsigned int irq;
+ unsigned int __maybe_unused irq;
- if (vias == NULL)
+ if (pmu_state == uninitialized)
return -ENODEV;
batt_req.complete = 1;
+#ifdef CONFIG_PPC_PMAC
irq = irq_of_parse_and_map(vias, 0);
if (!irq) {
printk(KERN_ERR "via-pmu: can't map interrupt\n");
}
/* Enable interrupts */
- out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
+ out_8(&via1[IER], IER_SET | SR_INT | CB1_INT);
+#else
+ if (request_irq(IRQ_MAC_ADB_SR, via_pmu_interrupt, IRQF_NO_SUSPEND,
+ "VIA-PMU-SR", NULL)) {
+ pr_err("%s: couldn't get SR irq\n", __func__);
+ return -ENODEV;
+ }
+ if (request_irq(IRQ_MAC_ADB_CL, via_pmu_interrupt, IRQF_NO_SUSPEND,
+ "VIA-PMU-CL", NULL)) {
+ pr_err("%s: couldn't get CL irq\n", __func__);
+ free_irq(IRQ_MAC_ADB_SR, NULL);
+ return -ENODEV;
+ }
+#endif /* !CONFIG_PPC_PMAC */
pmu_fully_inited = 1;
*/
static int __init via_pmu_dev_init(void)
{
- if (vias == NULL)
+ if (pmu_state == uninitialized)
return -ENODEV;
#ifdef CONFIG_PMAC_BACKLIGHT
int timeout;
struct adb_request req;
- out_8(&via[B], via[B] | TREQ); /* negate TREQ */
- out_8(&via[DIRB], (via[DIRB] | TREQ) & ~TACK); /* TACK in, TREQ out */
+ /* Negate TREQ. Set TACK to input and TREQ to output. */
+ out_8(&via2[B], in_8(&via2[B]) | TREQ);
+ out_8(&via2[DIRB], (in_8(&via2[DIRB]) | TREQ) & ~TACK);
pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, pmu_intr_mask);
timeout = 100000;
option_server_mode ? "enabled" : "disabled");
}
}
+
+ printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
+ PMU_DRIVER_VERSION, pbook_type[pmu_kind], pmu_version);
+
return 1;
}
static void
done_battery_state_ohare(struct adb_request* req)
{
+#ifdef CONFIG_PPC_PMAC
/* format:
* [0] : flags
* 0x01 : AC indicator
pmu_batteries[pmu_cur_battery].amperage = amperage;
pmu_batteries[pmu_cur_battery].voltage = voltage;
pmu_batteries[pmu_cur_battery].time_remaining = time;
+#endif /* CONFIG_PPC_PMAC */
clear_bit(0, &async_req_locks);
}
static int pmu_irqstats_proc_show(struct seq_file *m, void *v)
{
int i;
- static const char *irq_names[] = {
- "Total CB1 triggered events",
- "Total GPIO1 triggered events",
+ static const char *irq_names[NUM_IRQ_STATS] = {
+ "Unknown interrupt (type 0)",
+ "Unknown interrupt (type 1)",
"PC-Card eject button",
"Sound/Brightness button",
"ADB message",
"Tick timer",
"Ghost interrupt (zero len)",
"Empty interrupt (empty mask)",
- "Max irqs in a row"
+ "Max irqs in a row",
+ "Total CB1 triggered events",
+ "Total GPIO1 triggered events",
};
- for (i=0; i<11; i++) {
+ for (i = 0; i < NUM_IRQ_STATS; i++) {
seq_printf(m, " %2u: %10u (%s)\n",
i, pmu_irq_stats[i], irq_names[i]);
}
{
int i, ret;
- if ((vias == NULL) || (!pmu_fully_inited)) {
+ if (pmu_state == uninitialized || !pmu_fully_inited) {
req->complete = 1;
return -ENXIO;
}
static int pmu_adb_autopoll(int devs)
{
- if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
+ if (pmu_state == uninitialized || !pmu_fully_inited || !pmu_has_adb)
return -ENXIO;
adb_dev_map = devs;
struct adb_request req;
int save_autopoll = adb_dev_map;
- if ((vias == NULL) || (!pmu_fully_inited) || !pmu_has_adb)
+ if (pmu_state == uninitialized || !pmu_fully_inited || !pmu_has_adb)
return -ENXIO;
/* anyone got a better idea?? */
va_list list;
int i;
- if (vias == NULL)
+ if (pmu_state == uninitialized)
return -ENXIO;
if (nbytes < 0 || nbytes > 32) {
unsigned long flags;
int nsend;
- if (via == NULL) {
+ if (pmu_state == uninitialized) {
req->complete = 1;
return -ENXIO;
}
* reported
*/
int timeout = 4000;
- while ((in_8(&via[B]) & TACK) == 0) {
+ while ((in_8(&via2[B]) & TACK) == 0) {
if (--timeout < 0) {
printk(KERN_ERR "PMU not responding (!ack)\n");
return;
static inline void
send_byte(int x)
{
- volatile unsigned char __iomem *v = via;
-
- out_8(&v[ACR], in_8(&v[ACR]) | SR_OUT | SR_EXT);
- out_8(&v[SR], x);
- out_8(&v[B], in_8(&v[B]) & ~TREQ); /* assert TREQ */
- (void)in_8(&v[B]);
+ out_8(&via1[ACR], in_8(&via1[ACR]) | SR_OUT | SR_EXT);
+ out_8(&via1[SR], x);
+ out_8(&via2[B], in_8(&via2[B]) & ~TREQ); /* assert TREQ */
+ (void)in_8(&via2[B]);
}
static inline void
recv_byte(void)
{
- volatile unsigned char __iomem *v = via;
-
- out_8(&v[ACR], (in_8(&v[ACR]) & ~SR_OUT) | SR_EXT);
- in_8(&v[SR]); /* resets SR */
- out_8(&v[B], in_8(&v[B]) & ~TREQ);
- (void)in_8(&v[B]);
+ out_8(&via1[ACR], (in_8(&via1[ACR]) & ~SR_OUT) | SR_EXT);
+ in_8(&via1[SR]); /* resets SR */
+ out_8(&via2[B], in_8(&via2[B]) & ~TREQ);
+ (void)in_8(&via2[B]);
}
static inline void
void
pmu_poll(void)
{
- if (!via)
+ if (pmu_state == uninitialized)
return;
if (disable_poll)
return;
void
pmu_poll_adb(void)
{
- if (!via)
+ if (pmu_state == uninitialized)
return;
if (disable_poll)
return;
void
pmu_wait_complete(struct adb_request *req)
{
- if (!via)
+ if (pmu_state == uninitialized)
return;
while((pmu_state != idle && pmu_state != locked) || !req->complete)
via_pmu_interrupt(0, NULL);
{
unsigned long flags;
- if (!via)
+ if (pmu_state == uninitialized)
return;
spin_lock_irqsave(&pmu_lock, flags);
if (!adb_int_pending && pmu_state == idle && !req_awaiting_reply) {
if (gpio_irq >= 0)
disable_irq_nosync(gpio_irq);
- out_8(&via[IER], CB1_INT | IER_CLR);
+ out_8(&via1[IER], CB1_INT | IER_CLR);
spin_unlock_irqrestore(&pmu_lock, flags);
break;
}
{
unsigned long flags;
- if (!via || (pmu_suspended < 1))
+ if (pmu_state == uninitialized || pmu_suspended < 1)
return;
spin_lock_irqsave(&pmu_lock, flags);
adb_int_pending = 1;
if (gpio_irq >= 0)
enable_irq(gpio_irq);
- out_8(&via[IER], CB1_INT | IER_SET);
+ out_8(&via1[IER], CB1_INT | IER_SET);
spin_unlock_irqrestore(&pmu_lock, flags);
pmu_poll();
}
static void
pmu_handle_data(unsigned char *data, int len)
{
- unsigned char ints, pirq;
+ unsigned char ints;
+ int idx;
int i = 0;
asleep = 0;
ints &= ~(PMU_INT_ADB_AUTO | PMU_INT_AUTO_SRQ_POLL);
next:
-
if (ints == 0) {
if (i > pmu_irq_stats[10])
pmu_irq_stats[10] = i;
return;
}
-
- for (pirq = 0; pirq < 8; pirq++)
- if (ints & (1 << pirq))
- break;
- pmu_irq_stats[pirq]++;
i++;
- ints &= ~(1 << pirq);
+
+ idx = ffs(ints) - 1;
+ ints &= ~BIT(idx);
+
+ pmu_irq_stats[idx]++;
/* Note: for some reason, we get an interrupt with len=1,
* data[0]==0 after each normal ADB interrupt, at least
* on the Pismo. Still investigating... --BenH
*/
- if ((1 << pirq) & PMU_INT_ADB) {
+ switch (BIT(idx)) {
+ case PMU_INT_ADB:
if ((data[0] & PMU_INT_ADB_AUTO) == 0) {
struct adb_request *req = req_awaiting_reply;
if (!req) {
}
pmu_done(req);
} else {
+#ifdef CONFIG_XMON
if (len == 4 && data[1] == 0x2c) {
extern int xmon_wants_key, xmon_adb_keycode;
if (xmon_wants_key) {
return;
}
}
+#endif /* CONFIG_XMON */
#ifdef CONFIG_ADB
/*
* XXX On the [23]400 the PMU gives us an up
adb_input(data+1, len-1, 1);
#endif /* CONFIG_ADB */
}
- }
+ break;
+
/* Sound/brightness button pressed */
- else if ((1 << pirq) & PMU_INT_SNDBRT) {
+ case PMU_INT_SNDBRT:
#ifdef CONFIG_PMAC_BACKLIGHT
if (len == 3)
pmac_backlight_set_legacy_brightness_pmu(data[1] >> 4);
#endif
- }
+ break;
+
/* Tick interrupt */
- else if ((1 << pirq) & PMU_INT_TICK) {
- /* Environement or tick interrupt, query batteries */
+ case PMU_INT_TICK:
+ /* Environment or tick interrupt, query batteries */
if (pmu_battery_count) {
if ((--query_batt_timer) == 0) {
query_battery_state();
query_batt_timer = BATTERY_POLLING_COUNT;
}
}
- }
- else if ((1 << pirq) & PMU_INT_ENVIRONMENT) {
+ break;
+
+ case PMU_INT_ENVIRONMENT:
if (pmu_battery_count)
query_battery_state();
pmu_pass_intr(data, len);
via_pmu_event(PMU_EVT_POWER, !!(data[1]&8));
via_pmu_event(PMU_EVT_LID, data[1]&1);
}
- } else {
+ break;
+
+ default:
pmu_pass_intr(data, len);
}
goto next;
struct adb_request *req;
int bite = 0;
- if (via[B] & TREQ) {
- printk(KERN_ERR "PMU: spurious SR intr (%x)\n", via[B]);
- out_8(&via[IFR], SR_INT);
+ if (in_8(&via2[B]) & TREQ) {
+ printk(KERN_ERR "PMU: spurious SR intr (%x)\n", in_8(&via2[B]));
return NULL;
}
/* The ack may not yet be low when we get the interrupt */
- while ((in_8(&via[B]) & TACK) != 0)
+ while ((in_8(&via2[B]) & TACK) != 0)
;
/* if reading grab the byte, and reset the interrupt */
if (pmu_state == reading || pmu_state == reading_intr)
- bite = in_8(&via[SR]);
+ bite = in_8(&via1[SR]);
/* reset TREQ and wait for TACK to go high */
- out_8(&via[B], in_8(&via[B]) | TREQ);
+ out_8(&via2[B], in_8(&via2[B]) | TREQ);
wait_for_ack();
switch (pmu_state) {
++disable_poll;
for (;;) {
- intr = in_8(&via[IFR]) & (SR_INT | CB1_INT);
+ /* On 68k Macs, VIA interrupts are dispatched individually.
+ * Unless we are polling, the relevant IRQ flag has already
+ * been cleared.
+ */
+ intr = 0;
+ if (IS_ENABLED(CONFIG_PPC_PMAC) || !irq) {
+ intr = in_8(&via1[IFR]) & (SR_INT | CB1_INT);
+ out_8(&via1[IFR], intr);
+ }
+#ifndef CONFIG_PPC_PMAC
+ switch (irq) {
+ case IRQ_MAC_ADB_CL:
+ intr = CB1_INT;
+ break;
+ case IRQ_MAC_ADB_SR:
+ intr = SR_INT;
+ break;
+ }
+#endif
if (intr == 0)
break;
handled = 1;
if (++nloop > 1000) {
printk(KERN_DEBUG "PMU: stuck in intr loop, "
"intr=%x, ier=%x pmu_state=%d\n",
- intr, in_8(&via[IER]), pmu_state);
+ intr, in_8(&via1[IER]), pmu_state);
break;
}
- out_8(&via[IFR], intr);
if (intr & CB1_INT) {
adb_int_pending = 1;
- pmu_irq_stats[0]++;
+ pmu_irq_stats[11]++;
}
if (intr & SR_INT) {
req = pmu_sr_intr();
if (req)
break;
}
+#ifndef CONFIG_PPC_PMAC
+ break;
+#endif
}
recheck:
}
-static irqreturn_t
+static __maybe_unused irqreturn_t
gpio1_interrupt(int irq, void *arg)
{
unsigned long flags;
disable_irq_nosync(gpio_irq);
gpio_irq_enabled = 0;
}
- pmu_irq_stats[1]++;
+ pmu_irq_stats[12]++;
adb_int_pending = 1;
spin_unlock_irqrestore(&pmu_lock, flags);
via_pmu_interrupt(0, NULL);
{
struct adb_request req;
- if (vias == NULL)
+ if (pmu_state == uninitialized)
return ;
if (pmu_kind == PMU_KEYLARGO_BASED)
return ;
{
struct adb_request req;
- if (via == NULL)
+ if (pmu_state == uninitialized)
return;
local_irq_disable();
{
struct adb_request req;
- if (via == NULL)
+ if (pmu_state == uninitialized)
return;
local_irq_disable();
int
pmu_present(void)
{
- return via != NULL;
+ return pmu_state != uninitialized;
}
#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
static void
save_via_state(void)
{
- save_via[0] = in_8(&via[ANH]);
- save_via[1] = in_8(&via[DIRA]);
- save_via[2] = in_8(&via[B]);
- save_via[3] = in_8(&via[DIRB]);
- save_via[4] = in_8(&via[PCR]);
- save_via[5] = in_8(&via[ACR]);
- save_via[6] = in_8(&via[T1CL]);
- save_via[7] = in_8(&via[T1CH]);
+ save_via[0] = in_8(&via1[ANH]);
+ save_via[1] = in_8(&via1[DIRA]);
+ save_via[2] = in_8(&via1[B]);
+ save_via[3] = in_8(&via1[DIRB]);
+ save_via[4] = in_8(&via1[PCR]);
+ save_via[5] = in_8(&via1[ACR]);
+ save_via[6] = in_8(&via1[T1CL]);
+ save_via[7] = in_8(&via1[T1CH]);
}
static void
restore_via_state(void)
{
- out_8(&via[ANH], save_via[0]);
- out_8(&via[DIRA], save_via[1]);
- out_8(&via[B], save_via[2]);
- out_8(&via[DIRB], save_via[3]);
- out_8(&via[PCR], save_via[4]);
- out_8(&via[ACR], save_via[5]);
- out_8(&via[T1CL], save_via[6]);
- out_8(&via[T1CH], save_via[7]);
- out_8(&via[IER], IER_CLR | 0x7f); /* disable all intrs */
- out_8(&via[IFR], 0x7f); /* clear IFR */
- out_8(&via[IER], IER_SET | SR_INT | CB1_INT);
+ out_8(&via1[ANH], save_via[0]);
+ out_8(&via1[DIRA], save_via[1]);
+ out_8(&via1[B], save_via[2]);
+ out_8(&via1[DIRB], save_via[3]);
+ out_8(&via1[PCR], save_via[4]);
+ out_8(&via1[ACR], save_via[5]);
+ out_8(&via1[T1CL], save_via[6]);
+ out_8(&via1[T1CH], save_via[7]);
+ out_8(&via1[IER], IER_CLR | 0x7f); /* disable all intrs */
+ out_8(&via1[IFR], 0x7f); /* clear IFR */
+ out_8(&via1[IER], IER_SET | SR_INT | CB1_INT);
}
#define GRACKLE_PM (1<<7)
int error = -EINVAL;
switch (cmd) {
+#ifdef CONFIG_PPC_PMAC
case PMU_IOC_SLEEP:
if (!capable(CAP_SYS_ADMIN))
return -EACCES;
return put_user(0, argp);
else
return put_user(1, argp);
+#endif
#ifdef CONFIG_PMAC_BACKLIGHT_LEGACY
/* Compatibility ioctl's for backlight */
static int pmu_device_init(void)
{
- if (!via)
+ if (pmu_state == uninitialized)
return 0;
if (misc_register(&pmu_device) < 0)
printk(KERN_ERR "via-pmu: cannot register misc device.\n");
#ifdef DEBUG_SLEEP
static inline void
-polled_handshake(volatile unsigned char __iomem *via)
+polled_handshake(void)
{
- via[B] &= ~TREQ; eieio();
- while ((via[B] & TACK) != 0)
+ via2[B] &= ~TREQ; eieio();
+ while ((via2[B] & TACK) != 0)
;
- via[B] |= TREQ; eieio();
- while ((via[B] & TACK) == 0)
+ via2[B] |= TREQ; eieio();
+ while ((via2[B] & TACK) == 0)
;
}
static inline void
-polled_send_byte(volatile unsigned char __iomem *via, int x)
+polled_send_byte(int x)
{
- via[ACR] |= SR_OUT | SR_EXT; eieio();
- via[SR] = x; eieio();
- polled_handshake(via);
+ via1[ACR] |= SR_OUT | SR_EXT; eieio();
+ via1[SR] = x; eieio();
+ polled_handshake();
}
static inline int
-polled_recv_byte(volatile unsigned char __iomem *via)
+polled_recv_byte(void)
{
int x;
- via[ACR] = (via[ACR] & ~SR_OUT) | SR_EXT; eieio();
- x = via[SR]; eieio();
- polled_handshake(via);
- x = via[SR]; eieio();
+ via1[ACR] = (via1[ACR] & ~SR_OUT) | SR_EXT; eieio();
+ x = via1[SR]; eieio();
+ polled_handshake();
+ x = via1[SR]; eieio();
return x;
}
{
unsigned long flags;
int i, l, c;
- volatile unsigned char __iomem *v = via;
req->complete = 1;
c = req->data[0];
while (pmu_state != idle)
pmu_poll();
- while ((via[B] & TACK) == 0)
+ while ((via2[B] & TACK) == 0)
;
- polled_send_byte(v, c);
+ polled_send_byte(c);
if (l < 0) {
l = req->nbytes - 1;
- polled_send_byte(v, l);
+ polled_send_byte(l);
}
for (i = 1; i <= l; ++i)
- polled_send_byte(v, req->data[i]);
+ polled_send_byte(req->data[i]);
l = pmu_data_len[c][1];
if (l < 0)
- l = polled_recv_byte(v);
+ l = polled_recv_byte();
for (i = 0; i < l; ++i)
- req->reply[i + req->reply_len] = polled_recv_byte(v);
+ req->reply[i + req->reply_len] = polled_recv_byte();
if (req->done)
(*req->done)(req);
projects / linux.git / blobdiff