]> asedeno.scripts.mit.edu Git - linux.git/blobdiff - drivers/mfd/ti-lmu.c
Merge tag 'fuse-update-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/mszered...
[linux.git] / drivers / mfd / ti-lmu.c
index cfb411cde51cb39f4526c867de180a16b7427cc6..37d0bdb291c32fa5c1fe138b082a58af41d694dc 100644 (file)
@@ -12,7 +12,7 @@
 
 #include <linux/delay.h>
 #include <linux/err.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/kernel.h>
 #include <linux/mfd/core.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_gpio.h>
 #include <linux/slab.h>
 
 struct ti_lmu_data {
-       struct mfd_cell *cells;
+       const struct mfd_cell *cells;
        int num_cells;
        unsigned int max_register;
 };
 
 static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id)
 {
-       int ret;
-
-       if (gpio_is_valid(lmu->en_gpio)) {
-               ret = devm_gpio_request_one(lmu->dev, lmu->en_gpio,
-                                           GPIOF_OUT_INIT_HIGH, "lmu_hwen");
-               if (ret) {
-                       dev_err(lmu->dev, "Can not request enable GPIO: %d\n",
-                               ret);
-                       return ret;
-               }
-       }
+       if (lmu->en_gpio)
+               gpiod_set_value(lmu->en_gpio, 1);
 
        /* Delay about 1ms after HW enable pin control */
        usleep_range(1000, 1500);
@@ -57,13 +47,14 @@ static int ti_lmu_enable_hw(struct ti_lmu *lmu, enum ti_lmu_id id)
        return 0;
 }
 
-static void ti_lmu_disable_hw(struct ti_lmu *lmu)
+static void ti_lmu_disable_hw(void *data)
 {
-       if (gpio_is_valid(lmu->en_gpio))
-               gpio_set_value(lmu->en_gpio, 0);
+       struct ti_lmu *lmu = data;
+       if (lmu->en_gpio)
+               gpiod_set_value(lmu->en_gpio, 0);
 }
 
-static struct mfd_cell lm3532_devices[] = {
+static const struct mfd_cell lm3532_devices[] = {
        {
                .name          = "ti-lmu-backlight",
                .id            = LM3532,
@@ -78,7 +69,7 @@ static struct mfd_cell lm3532_devices[] = {
        .of_compatible = "ti,lm363x-regulator", \
 }                                              \
 
-static struct mfd_cell lm3631_devices[] = {
+static const struct mfd_cell lm3631_devices[] = {
        LM363X_REGULATOR(LM3631_BOOST),
        LM363X_REGULATOR(LM3631_LDO_CONT),
        LM363X_REGULATOR(LM3631_LDO_OREF),
@@ -91,7 +82,7 @@ static struct mfd_cell lm3631_devices[] = {
        },
 };
 
-static struct mfd_cell lm3632_devices[] = {
+static const struct mfd_cell lm3632_devices[] = {
        LM363X_REGULATOR(LM3632_BOOST),
        LM363X_REGULATOR(LM3632_LDO_POS),
        LM363X_REGULATOR(LM3632_LDO_NEG),
@@ -102,7 +93,7 @@ static struct mfd_cell lm3632_devices[] = {
        },
 };
 
-static struct mfd_cell lm3633_devices[] = {
+static const struct mfd_cell lm3633_devices[] = {
        {
                .name          = "ti-lmu-backlight",
                .id            = LM3633,
@@ -120,7 +111,7 @@ static struct mfd_cell lm3633_devices[] = {
        },
 };
 
-static struct mfd_cell lm3695_devices[] = {
+static const struct mfd_cell lm3695_devices[] = {
        {
                .name          = "ti-lmu-backlight",
                .id            = LM3695,
@@ -128,7 +119,7 @@ static struct mfd_cell lm3695_devices[] = {
        },
 };
 
-static struct mfd_cell lm3697_devices[] = {
+static const struct mfd_cell lm3697_devices[] = {
        {
                .name          = "ti-lmu-backlight",
                .id            = LM3697,
@@ -157,34 +148,21 @@ TI_LMU_DATA(lm3633, LM3633_MAX_REG);
 TI_LMU_DATA(lm3695, LM3695_MAX_REG);
 TI_LMU_DATA(lm3697, LM3697_MAX_REG);
 
-static const struct of_device_id ti_lmu_of_match[] = {
-       { .compatible = "ti,lm3532", .data = &lm3532_data },
-       { .compatible = "ti,lm3631", .data = &lm3631_data },
-       { .compatible = "ti,lm3632", .data = &lm3632_data },
-       { .compatible = "ti,lm3633", .data = &lm3633_data },
-       { .compatible = "ti,lm3695", .data = &lm3695_data },
-       { .compatible = "ti,lm3697", .data = &lm3697_data },
-       { }
-};
-MODULE_DEVICE_TABLE(of, ti_lmu_of_match);
-
 static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 {
        struct device *dev = &cl->dev;
-       const struct of_device_id *match;
        const struct ti_lmu_data *data;
        struct regmap_config regmap_cfg;
        struct ti_lmu *lmu;
        int ret;
 
-       match = of_match_device(ti_lmu_of_match, dev);
-       if (!match)
-               return -ENODEV;
        /*
         * Get device specific data from of_match table.
         * This data is defined by using TI_LMU_DATA() macro.
         */
-       data = (struct ti_lmu_data *)match->data;
+       data = of_device_get_match_data(dev);
+       if (!data)
+               return -ENODEV;
 
        lmu = devm_kzalloc(dev, sizeof(*lmu), GFP_KERNEL);
        if (!lmu)
@@ -204,11 +182,21 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
                return PTR_ERR(lmu->regmap);
 
        /* HW enable pin control and additional power up sequence if required */
-       lmu->en_gpio = of_get_named_gpio(dev->of_node, "enable-gpios", 0);
+       lmu->en_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
+       if (IS_ERR(lmu->en_gpio)) {
+               ret = PTR_ERR(lmu->en_gpio);
+               dev_err(dev, "Can not request enable GPIO: %d\n", ret);
+               return ret;
+       }
+
        ret = ti_lmu_enable_hw(lmu, id->driver_data);
        if (ret)
                return ret;
 
+       ret = devm_add_action_or_reset(dev, ti_lmu_disable_hw, lmu);
+       if (ret)
+               return ret;
+
        /*
         * Fault circuit(open/short) can be detected by ti-lmu-fault-monitor.
         * After fault detection is done, some devices should re-initialize
@@ -218,18 +206,20 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id)
 
        i2c_set_clientdata(cl, lmu);
 
-       return mfd_add_devices(lmu->dev, 0, data->cells,
-                              data->num_cells, NULL, 0, NULL);
+       return devm_mfd_add_devices(lmu->dev, 0, data->cells,
+                                   data->num_cells, NULL, 0, NULL);
 }
 
-static int ti_lmu_remove(struct i2c_client *cl)
-{
-       struct ti_lmu *lmu = i2c_get_clientdata(cl);
-
-       ti_lmu_disable_hw(lmu);
-       mfd_remove_devices(lmu->dev);
-       return 0;
-}
+static const struct of_device_id ti_lmu_of_match[] = {
+       { .compatible = "ti,lm3532", .data = &lm3532_data },
+       { .compatible = "ti,lm3631", .data = &lm3631_data },
+       { .compatible = "ti,lm3632", .data = &lm3632_data },
+       { .compatible = "ti,lm3633", .data = &lm3633_data },
+       { .compatible = "ti,lm3695", .data = &lm3695_data },
+       { .compatible = "ti,lm3697", .data = &lm3697_data },
+       { }
+};
+MODULE_DEVICE_TABLE(of, ti_lmu_of_match);
 
 static const struct i2c_device_id ti_lmu_ids[] = {
        { "lm3532", LM3532 },
@@ -244,7 +234,6 @@ MODULE_DEVICE_TABLE(i2c, ti_lmu_ids);
 
 static struct i2c_driver ti_lmu_driver = {
        .probe = ti_lmu_probe,
-       .remove = ti_lmu_remove,
        .driver = {
                .name = "ti-lmu",
                .of_match_table = ti_lmu_of_match,