priv->old_link = 0;
priv->old_duplex = -1;
priv->old_pause = -1;
+ } else {
+ phydev = NULL;
}
/* mask all interrupts and request them */
enet_dmac_writel(priv, priv->dma_chan_int_mask,
ENETDMAC_IRMASK, priv->tx_chan);
- if (priv->has_phy)
+ if (phydev)
phy_start(phydev);
else
bcm_enet_adjust_link(dev);
free_irq(dev->irq, dev);
out_phy_disconnect:
- if (priv->has_phy)
+ if (phydev)
phy_disconnect(phydev);
return ret;
struct bcm_enet_priv *priv;
priv = netdev_priv(dev);
- if (priv->has_phy) {
- if (!dev->phydev)
- return -ENODEV;
- return genphy_restart_aneg(dev->phydev);
- }
+ if (priv->has_phy)
+ return phy_ethtool_nway_reset(dev);
return -EOPNOTSUPP;
}
}
/*
- * calculate actual hardware mtu
+ * adjust mtu, can't be called while device is running
*/
-static int compute_hw_mtu(struct bcm_enet_priv *priv, int mtu)
+static int bcm_enet_change_mtu(struct net_device *dev, int new_mtu)
{
- int actual_mtu;
+ struct bcm_enet_priv *priv = netdev_priv(dev);
+ int actual_mtu = new_mtu;
- actual_mtu = mtu;
+ if (netif_running(dev))
+ return -EBUSY;
/* add ethernet header + vlan tag size */
actual_mtu += VLAN_ETH_HLEN;
- if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
- return -EINVAL;
-
/*
* setup maximum size before we get overflow mark in
* descriptor, note that this will not prevent reception of
*/
priv->rx_skb_size = ALIGN(actual_mtu + ETH_FCS_LEN,
priv->dma_maxburst * 4);
- return 0;
-}
-/*
- * adjust mtu, can't be called while device is running
- */
-static int bcm_enet_change_mtu(struct net_device *dev, int new_mtu)
-{
- int ret;
-
- if (netif_running(dev))
- return -EBUSY;
-
- ret = compute_hw_mtu(netdev_priv(dev), new_mtu);
- if (ret)
- return ret;
dev->mtu = new_mtu;
return 0;
}
priv->enet_is_sw = false;
priv->dma_maxburst = BCMENET_DMA_MAXBURST;
- ret = compute_hw_mtu(priv, dev->mtu);
+ ret = bcm_enet_change_mtu(dev, dev->mtu);
if (ret)
goto out;
netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
dev->ethtool_ops = &bcm_enet_ethtool_ops;
+ /* MTU range: 46 - 2028 */
+ dev->min_mtu = ETH_ZLEN - ETH_HLEN;
+ dev->max_mtu = BCMENET_MAX_MTU - VLAN_ETH_HLEN;
SET_NETDEV_DEV(dev, &pdev->dev);
ret = register_netdev(dev);
priv->dma_chan_width = pd->dma_chan_width;
}
- ret = compute_hw_mtu(priv, dev->mtu);
+ ret = bcm_enet_change_mtu(dev, dev->mtu);
if (ret)
goto out;